Struct esp32c2_hal::pac::generic::R

pub struct R<REG>where
    REG: RegisterSpec + ?Sized,{ /* private fields */ }

Register reader.

Result of the read methods of registers. Also used as a closure argument in the modify method.

Implementations

impl<REG> R<REG>where
    REG: RegisterSpec,

pub fn bits(&self) -> <REG as RegisterSpec>::Ux

Reads raw bits from register.

Trait Implementations

impl From<R<ADDR_SPEC>> for R

fn from(reader: R<ADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ADDR_SPEC>> for R

fn from(reader: R<ADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<AHB_TEST_SPEC>> for R

fn from(reader: R<AHB_TEST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ANA_CONF_SPEC>> for R

fn from(reader: R<ANA_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<APB_ADC_ARB_CTRL_SPEC>> for R

fn from(reader: R<APB_ADC_ARB_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<APB_ADC_CLKM_CONF_SPEC>> for R

fn from(reader: R<APB_ADC_CLKM_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<APB_ADC_INT_MAP_SPEC>> for R

fn from(reader: R<APB_ADC_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<APB_CTRL_DATE_SPEC>> for R

fn from(reader: R<APB_CTRL_DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<APB_CTRL_INTR_MAP_SPEC>> for R

fn from(reader: R<APB_CTRL_INTR_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<APB_PERIPHERAL_ACCESS_0_SPEC>> for R

fn from(reader: R<APB_PERIPHERAL_ACCESS_0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<APB_PERIPHERAL_ACCESS_1_SPEC>> for R

fn from(reader: R<APB_PERIPHERAL_ACCESS_1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<APB_TSENS_CTRL2_SPEC>> for R

fn from(reader: R<APB_TSENS_CTRL2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<APB_TSENS_CTRL_SPEC>> for R

fn from(reader: R<APB_TSENS_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ASSIST_DEBUG_INTR_MAP_SPEC>> for R

fn from(reader: R<ASSIST_DEBUG_INTR_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<AT_CMD_CHAR_SPEC>> for R

fn from(reader: R<AT_CMD_CHAR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<AT_CMD_GAPTOUT_SPEC>> for R

fn from(reader: R<AT_CMD_GAPTOUT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<AT_CMD_POSTCNT_SPEC>> for R

fn from(reader: R<AT_CMD_POSTCNT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<AT_CMD_PRECNT_SPEC>> for R

fn from(reader: R<AT_CMD_PRECNT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<BIAS_CONF_SPEC>> for R

fn from(reader: R<BIAS_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<BLE_SEC_INT_MAP_SPEC>> for R

fn from(reader: R<BLE_SEC_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<BLE_TIMER_INT_MAP_SPEC>> for R

fn from(reader: R<BLE_TIMER_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<BROWN_OUT_SPEC>> for R

fn from(reader: R<BROWN_OUT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<BT_BB_INT_MAP_SPEC>> for R

fn from(reader: R<BT_BB_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<BT_BB_NMI_MAP_SPEC>> for R

fn from(reader: R<BT_BB_NMI_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<BT_LPCK_DIV_FRAC_SPEC>> for R

fn from(reader: R<BT_LPCK_DIV_FRAC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<BT_LPCK_DIV_INT_SPEC>> for R

fn from(reader: R<BT_LPCK_DIV_INT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<BT_MAC_INT_MAP_SPEC>> for R

fn from(reader: R<BT_MAC_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<BT_SELECT_SPEC>> for R

fn from(reader: R<BT_SELECT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<BUSY_SPEC>> for R

fn from(reader: R<BUSY_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_CONF_MISC_SPEC>> for R

fn from(reader: R<CACHE_CONF_MISC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_CONTROL_SPEC>> for R

fn from(reader: R<CACHE_CONTROL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_CORE0_ACS_INT_MAP_SPEC>> for R

fn from(reader: R<CACHE_CORE0_ACS_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_ENCRYPT_DECRYPT_CLK_FORCE_ON_SPEC>> for R

fn from(reader: R<CACHE_ENCRYPT_DECRYPT_CLK_FORCE_ON_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_ENCRYPT_DECRYPT_RECORD_DISABLE_SPEC>> for R

fn from(reader: R<CACHE_ENCRYPT_DECRYPT_RECORD_DISABLE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_FCTRL_SPEC>> for R

fn from(reader: R<CACHE_FCTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_FCTRL_SPEC>> for R

fn from(reader: R<CACHE_FCTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_IA_INT_MAP_SPEC>> for R

fn from(reader: R<CACHE_IA_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_ILG_INT_ENA_SPEC>> for R

fn from(reader: R<CACHE_ILG_INT_ENA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_ILG_INT_ST_SPEC>> for R

fn from(reader: R<CACHE_ILG_INT_ST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_MMU_ACCESS_0_SPEC>> for R

fn from(reader: R<CACHE_MMU_ACCESS_0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_MMU_ACCESS_1_SPEC>> for R

fn from(reader: R<CACHE_MMU_ACCESS_1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_MMU_FAULT_CONTENT_SPEC>> for R

fn from(reader: R<CACHE_MMU_FAULT_CONTENT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_MMU_FAULT_VADDR_SPEC>> for R

fn from(reader: R<CACHE_MMU_FAULT_VADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_MMU_OWNER_SPEC>> for R

fn from(reader: R<CACHE_MMU_OWNER_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_MMU_POWER_CTRL_SPEC>> for R

fn from(reader: R<CACHE_MMU_POWER_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_PRELOAD_INT_CTRL_SPEC>> for R

fn from(reader: R<CACHE_PRELOAD_INT_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_REQUEST_SPEC>> for R

fn from(reader: R<CACHE_REQUEST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_STATE_SPEC>> for R

fn from(reader: R<CACHE_STATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_SYNC_INT_CTRL_SPEC>> for R

fn from(reader: R<CACHE_SYNC_INT_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_TAG_ACCESS_0_SPEC>> for R

fn from(reader: R<CACHE_TAG_ACCESS_0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_TAG_ACCESS_1_SPEC>> for R

fn from(reader: R<CACHE_TAG_ACCESS_1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CACHE_WRAP_AROUND_CTRL_SPEC>> for R

fn from(reader: R<CACHE_WRAP_AROUND_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CALI_SPEC>> for R

fn from(reader: R<CALI_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CH_CONF0_SPEC>> for R

fn from(reader: R<CH_CONF0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CH_CONF1_SPEC>> for R

fn from(reader: R<CH_CONF1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CH_DUTY_R_SPEC>> for R

fn from(reader: R<CH_DUTY_R_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CH_DUTY_SPEC>> for R

fn from(reader: R<CH_DUTY_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CH_HPOINT_SPEC>> for R

fn from(reader: R<CH_HPOINT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLKDIV_SPEC>> for R

fn from(reader: R<CLKDIV_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLKGATE_FORCE_ON_SPEC>> for R

fn from(reader: R<CLKGATE_FORCE_ON_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLK_CONF_SPEC>> for R

fn from(reader: R<CLK_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLK_CONF_SPEC>> for R

fn from(reader: R<CLK_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLK_CONF_SPEC>> for R

fn from(reader: R<CLK_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLK_GATE_SPEC>> for R

fn from(reader: R<CLK_GATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLK_OUT_EN_SPEC>> for R

fn from(reader: R<CLK_OUT_EN_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLK_SPEC>> for R

fn from(reader: R<CLK_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLOCK_GATE_REG_SPEC>> for R

fn from(reader: R<CLOCK_GATE_REG_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLOCK_GATE_SPEC>> for R

fn from(reader: R<CLOCK_GATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLOCK_GATE_SPEC>> for R

fn from(reader: R<CLOCK_GATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLOCK_GATE_SPEC>> for R

fn from(reader: R<CLOCK_GATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLOCK_GATE_SPEC>> for R

fn from(reader: R<CLOCK_GATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLOCK_GATE_SPEC>> for R

fn from(reader: R<CLOCK_GATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLOCK_GATE_SPEC>> for R

fn from(reader: R<CLOCK_GATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLOCK_GATE_SPEC>> for R

fn from(reader: R<CLOCK_GATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLOCK_SPEC>> for R

fn from(reader: R<CLOCK_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLOCK_SPEC>> for R

fn from(reader: R<CLOCK_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CLOCK_SPEC>> for R

fn from(reader: R<CLOCK_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CMD_SPEC>> for R

fn from(reader: R<CMD_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CMD_SPEC>> for R

fn from(reader: R<CMD_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CMD_SPEC>> for R

fn from(reader: R<CMD_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CNTL_DATE_SPEC>> for R

fn from(reader: R<CNTL_DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CNTL_DBG_MAP_SPEC>> for R

fn from(reader: R<CNTL_DBG_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CNTL_DBG_SAR_SEL_SPEC>> for R

fn from(reader: R<CNTL_DBG_SAR_SEL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CNTL_DBG_SEL_SPEC>> for R

fn from(reader: R<CNTL_DBG_SEL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CNTL_GPIO_WAKEUP_SPEC>> for R

fn from(reader: R<CNTL_GPIO_WAKEUP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CNTL_RETENTION_CTRL_SPEC>> for R

fn from(reader: R<CNTL_RETENTION_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CNTL_SENSOR_CTRL_SPEC>> for R

fn from(reader: R<CNTL_SENSOR_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COEX_INT_MAP_SPEC>> for R

fn from(reader: R<COEX_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMB_PVT_ERR_HVT_SITE0_SPEC>> for R

fn from(reader: R<COMB_PVT_ERR_HVT_SITE0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMB_PVT_ERR_HVT_SITE1_SPEC>> for R

fn from(reader: R<COMB_PVT_ERR_HVT_SITE1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMB_PVT_ERR_HVT_SITE2_SPEC>> for R

fn from(reader: R<COMB_PVT_ERR_HVT_SITE2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMB_PVT_ERR_HVT_SITE3_SPEC>> for R

fn from(reader: R<COMB_PVT_ERR_HVT_SITE3_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMB_PVT_ERR_LVT_SITE0_SPEC>> for R

fn from(reader: R<COMB_PVT_ERR_LVT_SITE0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMB_PVT_ERR_LVT_SITE1_SPEC>> for R

fn from(reader: R<COMB_PVT_ERR_LVT_SITE1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMB_PVT_ERR_LVT_SITE2_SPEC>> for R

fn from(reader: R<COMB_PVT_ERR_LVT_SITE2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMB_PVT_ERR_LVT_SITE3_SPEC>> for R

fn from(reader: R<COMB_PVT_ERR_LVT_SITE3_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMB_PVT_ERR_NVT_SITE0_SPEC>> for R

fn from(reader: R<COMB_PVT_ERR_NVT_SITE0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMB_PVT_ERR_NVT_SITE1_SPEC>> for R

fn from(reader: R<COMB_PVT_ERR_NVT_SITE1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMB_PVT_ERR_NVT_SITE2_SPEC>> for R

fn from(reader: R<COMB_PVT_ERR_NVT_SITE2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMB_PVT_ERR_NVT_SITE3_SPEC>> for R

fn from(reader: R<COMB_PVT_ERR_NVT_SITE3_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMB_PVT_HVT_CONF_SPEC>> for R

fn from(reader: R<COMB_PVT_HVT_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMB_PVT_LVT_CONF_SPEC>> for R

fn from(reader: R<COMB_PVT_LVT_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMB_PVT_NVT_CONF_SPEC>> for R

fn from(reader: R<COMB_PVT_NVT_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<COMD_SPEC>> for R

fn from(reader: R<COMD_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CONF0_SPEC>> for R

fn from(reader: R<CONF0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CONF1_SPEC>> for R

fn from(reader: R<CONF1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CONF_SPEC>> for R

fn from(reader: R<CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CONF_SPEC>> for R

fn from(reader: R<CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CONF_SPEC>> for R

fn from(reader: R<CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CONTINUE_SPEC>> for R

fn from(reader: R<CONTINUE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE0_ACS_CACHE_INT_ENA_SPEC>> for R

fn from(reader: R<CORE0_ACS_CACHE_INT_ENA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE0_ACS_CACHE_INT_ST_SPEC>> for R

fn from(reader: R<CORE0_ACS_CACHE_INT_ST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE0_DBUS_REJECT_ST_SPEC>> for R

fn from(reader: R<CORE0_DBUS_REJECT_ST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE0_DBUS_REJECT_VADDR_SPEC>> for R

fn from(reader: R<CORE0_DBUS_REJECT_VADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE0_IBUS_REJECT_ST_SPEC>> for R

fn from(reader: R<CORE0_IBUS_REJECT_ST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE0_IBUS_REJECT_VADDR_SPEC>> for R

fn from(reader: R<CORE0_IBUS_REJECT_VADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE_0_DEBUG_MODE_SPEC>> for R

fn from(reader: R<CORE_0_DEBUG_MODE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE_0_INTR_ENA_SPEC>> for R

fn from(reader: R<CORE_0_INTR_ENA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE_0_INTR_RAW_SPEC>> for R

fn from(reader: R<CORE_0_INTR_RAW_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE_0_INTR_RLS_SPEC>> for R

fn from(reader: R<CORE_0_INTR_RLS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE_0_LASTPC_BEFORE_EXCEPTION_SPEC>> for R

fn from(reader: R<CORE_0_LASTPC_BEFORE_EXCEPTION_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE_0_PIF_PMS_MONITOR_VIOLATE_SIZE_INTR_MAP_SPEC>> for R

fn from(reader: R<CORE_0_PIF_PMS_MONITOR_VIOLATE_SIZE_INTR_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE_0_RCD_EN_SPEC>> for R

fn from(reader: R<CORE_0_RCD_EN_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE_0_RCD_PDEBUGPC_SPEC>> for R

fn from(reader: R<CORE_0_RCD_PDEBUGPC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE_0_RCD_PDEBUGSP_SPEC>> for R

fn from(reader: R<CORE_0_RCD_PDEBUGSP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE_0_SP_MAX_SPEC>> for R

fn from(reader: R<CORE_0_SP_MAX_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE_0_SP_MIN_SPEC>> for R

fn from(reader: R<CORE_0_SP_MIN_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE_0_SP_PC_SPEC>> for R

fn from(reader: R<CORE_0_SP_PC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CORE_CLK_SEL_SPEC>> for R

fn from(reader: R<CORE_CLK_SEL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPUSDIO_INT_SPEC>> for R

fn from(reader: R<CPUSDIO_INT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INTR_FROM_CPU_0_MAP_SPEC>> for R

fn from(reader: R<CPU_INTR_FROM_CPU_0_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INTR_FROM_CPU_0_SPEC>> for R

fn from(reader: R<CPU_INTR_FROM_CPU_0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INTR_FROM_CPU_1_MAP_SPEC>> for R

fn from(reader: R<CPU_INTR_FROM_CPU_1_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INTR_FROM_CPU_1_SPEC>> for R

fn from(reader: R<CPU_INTR_FROM_CPU_1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INTR_FROM_CPU_2_MAP_SPEC>> for R

fn from(reader: R<CPU_INTR_FROM_CPU_2_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INTR_FROM_CPU_2_SPEC>> for R

fn from(reader: R<CPU_INTR_FROM_CPU_2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INTR_FROM_CPU_3_MAP_SPEC>> for R

fn from(reader: R<CPU_INTR_FROM_CPU_3_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INTR_FROM_CPU_3_SPEC>> for R

fn from(reader: R<CPU_INTR_FROM_CPU_3_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_CLEAR_SPEC>> for R

fn from(reader: R<CPU_INT_CLEAR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_EIP_STATUS_SPEC>> for R

fn from(reader: R<CPU_INT_EIP_STATUS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_ENABLE_SPEC>> for R

fn from(reader: R<CPU_INT_ENABLE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_0_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_10_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_10_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_11_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_11_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_12_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_12_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_13_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_13_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_14_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_14_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_15_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_15_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_16_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_16_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_17_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_17_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_18_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_18_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_19_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_19_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_1_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_20_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_20_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_21_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_21_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_22_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_22_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_23_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_23_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_24_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_24_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_25_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_25_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_26_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_26_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_27_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_27_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_28_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_28_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_29_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_29_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_2_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_30_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_30_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_31_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_31_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_3_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_3_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_4_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_4_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_5_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_5_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_6_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_6_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_7_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_7_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_8_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_8_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_PRI_9_SPEC>> for R

fn from(reader: R<CPU_INT_PRI_9_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_THRESH_SPEC>> for R

fn from(reader: R<CPU_INT_THRESH_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_INT_TYPE_SPEC>> for R

fn from(reader: R<CPU_INT_TYPE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_PERIOD_CONF_SPEC>> for R

fn from(reader: R<CPU_PERIOD_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_PERI_CLK_EN_SPEC>> for R

fn from(reader: R<CPU_PERI_CLK_EN_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_PERI_RST_EN_SPEC>> for R

fn from(reader: R<CPU_PERI_RST_EN_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CPU_PER_CONF_SPEC>> for R

fn from(reader: R<CPU_PER_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CTRL1_SPEC>> for R

fn from(reader: R<CTRL1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CTRL1_SPEC>> for R

fn from(reader: R<CTRL1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CTRL2_SPEC>> for R

fn from(reader: R<CTRL2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CTRL2_SPEC>> for R

fn from(reader: R<CTRL2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CTRL_SPEC>> for R

fn from(reader: R<CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CTRL_SPEC>> for R

fn from(reader: R<CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CTRL_SPEC>> for R

fn from(reader: R<CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CTRL_SPEC>> for R

fn from(reader: R<CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<CTR_SPEC>> for R

fn from(reader: R<CTR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DAC_CONF_SPEC>> for R

fn from(reader: R<DAC_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATA_SPEC>> for R

fn from(reader: R<DATA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATA_SPEC>> for R

fn from(reader: R<DATA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATE_SPEC>> for R

fn from(reader: R<DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATE_SPEC>> for R

fn from(reader: R<DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATE_SPEC>> for R

fn from(reader: R<DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATE_SPEC>> for R

fn from(reader: R<DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATE_SPEC>> for R

fn from(reader: R<DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATE_SPEC>> for R

fn from(reader: R<DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATE_SPEC>> for R

fn from(reader: R<DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATE_SPEC>> for R

fn from(reader: R<DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATE_SPEC>> for R

fn from(reader: R<DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATE_SPEC>> for R

fn from(reader: R<DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATE_SPEC>> for R

fn from(reader: R<DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATE_SPEC>> for R

fn from(reader: R<DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATE_SPEC>> for R

fn from(reader: R<DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DATE_SPEC>> for R

fn from(reader: R<DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DBUS_TO_FLASH_END_VADDR_SPEC>> for R

fn from(reader: R<DBUS_TO_FLASH_END_VADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DBUS_TO_FLASH_START_VADDR_SPEC>> for R

fn from(reader: R<DBUS_TO_FLASH_START_VADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DESTINATION_SPEC>> for R

fn from(reader: R<DESTINATION_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DIAG0_SPEC>> for R

fn from(reader: R<DIAG0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DIG_ISO_SPEC>> for R

fn from(reader: R<DIG_ISO_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DIG_PAD_HOLD_SPEC>> for R

fn from(reader: R<DIG_PAD_HOLD_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DIG_PWC_SPEC>> for R

fn from(reader: R<DIG_PWC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DIN_MODE_SPEC>> for R

fn from(reader: R<DIN_MODE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DIN_MODE_SPEC>> for R

fn from(reader: R<DIN_MODE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DIN_NUM_SPEC>> for R

fn from(reader: R<DIN_NUM_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DIN_NUM_SPEC>> for R

fn from(reader: R<DIN_NUM_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DMA_BLOCK_NUM_SPEC>> for R

fn from(reader: R<DMA_BLOCK_NUM_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DMA_CH0_INT_MAP_SPEC>> for R

fn from(reader: R<DMA_CH0_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DMA_CONF_SPEC>> for R

fn from(reader: R<DMA_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DMA_CONF_SPEC>> for R

fn from(reader: R<DMA_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DMA_INT_ENA_SPEC>> for R

fn from(reader: R<DMA_INT_ENA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DMA_INT_RAW_SPEC>> for R

fn from(reader: R<DMA_INT_RAW_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DMA_INT_ST_SPEC>> for R

fn from(reader: R<DMA_INT_ST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DOUT_MODE_SPEC>> for R

fn from(reader: R<DOUT_MODE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<DOUT_MODE_SPEC>> for R

fn from(reader: R<DOUT_MODE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ECC_INT_MAP_SPEC>> for R

fn from(reader: R<ECC_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<EDMA_CTRL_SPEC>> for R

fn from(reader: R<EDMA_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<EFUSE_INT_MAP_SPEC>> for R

fn from(reader: R<EFUSE_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ENABLE_SPEC>> for R

fn from(reader: R<ENABLE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<EXTERNAL_DEVICE_ENCRYPT_DECRYPT_CONTROL_SPEC>> for R

fn from(reader: R<EXTERNAL_DEVICE_ENCRYPT_DECRYPT_CONTROL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<EXT_MEM_PMS_LOCK_SPEC>> for R

fn from(reader: R<EXT_MEM_PMS_LOCK_SPEC>) -> R

Converts to this type from the input type.

impl From<R<EXT_WAKEUP_CONF_SPEC>> for R

fn from(reader: R<EXT_WAKEUP_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<EXT_XTL_CONF_SPEC>> for R

fn from(reader: R<EXT_XTL_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FIB_SEL_SPEC>> for R

fn from(reader: R<FIB_SEL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FIFO_CONF_SPEC>> for R

fn from(reader: R<FIFO_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FIFO_SPEC>> for R

fn from(reader: R<FIFO_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FIFO_ST_SPEC>> for R

fn from(reader: R<FIFO_ST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FILTER_CFG_SPEC>> for R

fn from(reader: R<FILTER_CFG_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FILTER_CTRL0_SPEC>> for R

fn from(reader: R<FILTER_CTRL0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FILTER_CTRL1_SPEC>> for R

fn from(reader: R<FILTER_CTRL1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLASH_ACE0_ADDR_SPEC>> for R

fn from(reader: R<FLASH_ACE0_ADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLASH_ACE0_ATTR_SPEC>> for R

fn from(reader: R<FLASH_ACE0_ATTR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLASH_ACE0_SIZE_SPEC>> for R

fn from(reader: R<FLASH_ACE0_SIZE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLASH_ACE1_ADDR_SPEC>> for R

fn from(reader: R<FLASH_ACE1_ADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLASH_ACE1_ATTR_SPEC>> for R

fn from(reader: R<FLASH_ACE1_ATTR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLASH_ACE1_SIZE_SPEC>> for R

fn from(reader: R<FLASH_ACE1_SIZE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLASH_ACE2_ADDR_SPEC>> for R

fn from(reader: R<FLASH_ACE2_ADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLASH_ACE2_ATTR_SPEC>> for R

fn from(reader: R<FLASH_ACE2_ATTR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLASH_ACE2_SIZE_SPEC>> for R

fn from(reader: R<FLASH_ACE2_SIZE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLASH_ACE3_ADDR_SPEC>> for R

fn from(reader: R<FLASH_ACE3_ADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLASH_ACE3_ATTR_SPEC>> for R

fn from(reader: R<FLASH_ACE3_ATTR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLASH_ACE3_SIZE_SPEC>> for R

fn from(reader: R<FLASH_ACE3_SIZE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLASH_SUS_CMD_SPEC>> for R

fn from(reader: R<FLASH_SUS_CMD_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLASH_SUS_CTRL_SPEC>> for R

fn from(reader: R<FLASH_SUS_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLASH_WAITI_CTRL_SPEC>> for R

fn from(reader: R<FLASH_WAITI_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FLOW_CONF_SPEC>> for R

fn from(reader: R<FLOW_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FRONT_END_MEM_PD_SPEC>> for R

fn from(reader: R<FRONT_END_MEM_PD_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FSM_SPEC>> for R

fn from(reader: R<FSM_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FSM_STATUS_SPEC>> for R

fn from(reader: R<FSM_STATUS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FSM_WAIT_SPEC>> for R

fn from(reader: R<FSM_WAIT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FUNC_IN_SEL_CFG_SPEC>> for R

fn from(reader: R<FUNC_IN_SEL_CFG_SPEC>) -> R

Converts to this type from the input type.

impl From<R<FUNC_OUT_SEL_CFG_SPEC>> for R

fn from(reader: R<FUNC_OUT_SEL_CFG_SPEC>) -> R

Converts to this type from the input type.

impl From<R<GPIO_INTERRUPT_PRO_MAP_SPEC>> for R

fn from(reader: R<GPIO_INTERRUPT_PRO_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<GPIO_INTERRUPT_PRO_NMI_MAP_SPEC>> for R

fn from(reader: R<GPIO_INTERRUPT_PRO_NMI_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<GPIO_SPEC>> for R

fn from(reader: R<GPIO_SPEC>) -> R

Converts to this type from the input type.

impl From<R<HIGHPULSE_SPEC>> for R

fn from(reader: R<HIGHPULSE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<HOST_INF_SEL_SPEC>> for R

fn from(reader: R<HOST_INF_SEL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<H_MEM_SPEC>> for R

fn from(reader: R<H_MEM_SPEC>) -> R

Converts to this type from the input type.

impl From<R<I2C_EXT0_INTR_MAP_SPEC>> for R

fn from(reader: R<I2C_EXT0_INTR_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<I2C_MST_INT_MAP_SPEC>> for R

fn from(reader: R<I2C_MST_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IBUS_TO_FLASH_END_VADDR_SPEC>> for R

fn from(reader: R<IBUS_TO_FLASH_END_VADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IBUS_TO_FLASH_START_VADDR_SPEC>> for R

fn from(reader: R<IBUS_TO_FLASH_START_VADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ICACHE_ATOMIC_OPERATE_ENA_SPEC>> for R

fn from(reader: R<ICACHE_ATOMIC_OPERATE_ENA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ICACHE_CTRL1_SPEC>> for R

fn from(reader: R<ICACHE_CTRL1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ICACHE_CTRL_SPEC>> for R

fn from(reader: R<ICACHE_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ICACHE_FREEZE_SPEC>> for R

fn from(reader: R<ICACHE_FREEZE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ICACHE_PRELOAD_INT_MAP_SPEC>> for R

fn from(reader: R<ICACHE_PRELOAD_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ICACHE_SYNC_ADDR_SPEC>> for R

fn from(reader: R<ICACHE_SYNC_ADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ICACHE_SYNC_CTRL_SPEC>> for R

fn from(reader: R<ICACHE_SYNC_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ICACHE_SYNC_INT_MAP_SPEC>> for R

fn from(reader: R<ICACHE_SYNC_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ICACHE_SYNC_SIZE_SPEC>> for R

fn from(reader: R<ICACHE_SYNC_SIZE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ICACHE_TAG_POWER_CTRL_SPEC>> for R

fn from(reader: R<ICACHE_TAG_POWER_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IDLE_CONF_SPEC>> for R

fn from(reader: R<IDLE_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ID_SPEC>> for R

fn from(reader: R<ID_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INFIFO_STATUS_CH0_SPEC>> for R

fn from(reader: R<INFIFO_STATUS_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INTERNAL_SRAM_USAGE_0_SPEC>> for R

fn from(reader: R<INTERNAL_SRAM_USAGE_0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INTERNAL_SRAM_USAGE_1_SPEC>> for R

fn from(reader: R<INTERNAL_SRAM_USAGE_1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INTERNAL_SRAM_USAGE_3_SPEC>> for R

fn from(reader: R<INTERNAL_SRAM_USAGE_3_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INTERRUPT_REG_DATE_SPEC>> for R

fn from(reader: R<INTERRUPT_REG_DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INTR_STATUS_REG_0_SPEC>> for R

fn from(reader: R<INTR_STATUS_REG_0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INTR_STATUS_REG_1_SPEC>> for R

fn from(reader: R<INTR_STATUS_REG_1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_CLR_RTC_SPEC>> for R

fn from(reader: R<INT_CLR_RTC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ENA_CH0_SPEC>> for R

fn from(reader: R<INT_ENA_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ENA_RTC_SPEC>> for R

fn from(reader: R<INT_ENA_RTC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ENA_RTC_W1TC_SPEC>> for R

fn from(reader: R<INT_ENA_RTC_W1TC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ENA_RTC_W1TS_SPEC>> for R

fn from(reader: R<INT_ENA_RTC_W1TS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ENA_SPEC>> for R

fn from(reader: R<INT_ENA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ENA_SPEC>> for R

fn from(reader: R<INT_ENA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ENA_SPEC>> for R

fn from(reader: R<INT_ENA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ENA_SPEC>> for R

fn from(reader: R<INT_ENA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ENA_SPEC>> for R

fn from(reader: R<INT_ENA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ENA_SPEC>> for R

fn from(reader: R<INT_ENA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ENA_SPEC>> for R

fn from(reader: R<INT_ENA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ENA_TIMERS_SPEC>> for R

fn from(reader: R<INT_ENA_TIMERS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_RAW_CH0_SPEC>> for R

fn from(reader: R<INT_RAW_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_RAW_RTC_SPEC>> for R

fn from(reader: R<INT_RAW_RTC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_RAW_SPEC>> for R

fn from(reader: R<INT_RAW_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_RAW_SPEC>> for R

fn from(reader: R<INT_RAW_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_RAW_SPEC>> for R

fn from(reader: R<INT_RAW_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_RAW_SPEC>> for R

fn from(reader: R<INT_RAW_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_RAW_SPEC>> for R

fn from(reader: R<INT_RAW_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_RAW_SPEC>> for R

fn from(reader: R<INT_RAW_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_RAW_SPEC>> for R

fn from(reader: R<INT_RAW_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_RAW_TIMERS_SPEC>> for R

fn from(reader: R<INT_RAW_TIMERS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_STATUS_SPEC>> for R

fn from(reader: R<INT_STATUS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ST_CH0_SPEC>> for R

fn from(reader: R<INT_ST_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ST_RTC_SPEC>> for R

fn from(reader: R<INT_ST_RTC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ST_SPEC>> for R

fn from(reader: R<INT_ST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ST_SPEC>> for R

fn from(reader: R<INT_ST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ST_SPEC>> for R

fn from(reader: R<INT_ST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ST_SPEC>> for R

fn from(reader: R<INT_ST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ST_SPEC>> for R

fn from(reader: R<INT_ST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ST_SPEC>> for R

fn from(reader: R<INT_ST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<INT_ST_TIMERS_SPEC>> for R

fn from(reader: R<INT_ST_TIMERS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IN_CONF0_CH0_SPEC>> for R

fn from(reader: R<IN_CONF0_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IN_CONF1_CH0_SPEC>> for R

fn from(reader: R<IN_CONF1_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IN_DSCR_BF0_CH0_SPEC>> for R

fn from(reader: R<IN_DSCR_BF0_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IN_DSCR_BF1_CH0_SPEC>> for R

fn from(reader: R<IN_DSCR_BF1_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IN_DSCR_CH0_SPEC>> for R

fn from(reader: R<IN_DSCR_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IN_ERR_EOF_DES_ADDR_CH0_SPEC>> for R

fn from(reader: R<IN_ERR_EOF_DES_ADDR_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IN_LINK_CH0_SPEC>> for R

fn from(reader: R<IN_LINK_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IN_PERI_SEL_CH0_SPEC>> for R

fn from(reader: R<IN_PERI_SEL_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IN_POP_CH0_SPEC>> for R

fn from(reader: R<IN_POP_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IN_PRI_CH0_SPEC>> for R

fn from(reader: R<IN_PRI_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IN_SPEC>> for R

fn from(reader: R<IN_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IN_STATE_CH0_SPEC>> for R

fn from(reader: R<IN_STATE_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IN_SUC_EOF_DES_ADDR_CH0_SPEC>> for R

fn from(reader: R<IN_SUC_EOF_DES_ADDR_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<IRQ_ENA_SPEC>> for R

fn from(reader: R<IRQ_ENA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<LEDC_INT_MAP_SPEC>> for R

fn from(reader: R<LEDC_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<LINESIZE_SPEC>> for R

fn from(reader: R<LINESIZE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<LOWPULSE_SPEC>> for R

fn from(reader: R<LOWPULSE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<LOW_POWER_ST_SPEC>> for R

fn from(reader: R<LOW_POWER_ST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<LP_TIMER_INT_MAP_SPEC>> for R

fn from(reader: R<LP_TIMER_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MAC_INTR_MAP_SPEC>> for R

fn from(reader: R<MAC_INTR_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MEM_CONF_SPEC>> for R

fn from(reader: R<MEM_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MEM_PD_MASK_SPEC>> for R

fn from(reader: R<MEM_PD_MASK_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MEM_POWER_DOWN_SPEC>> for R

fn from(reader: R<MEM_POWER_DOWN_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MEM_POWER_UP_SPEC>> for R

fn from(reader: R<MEM_POWER_UP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MEM_PVT_SPEC>> for R

fn from(reader: R<MEM_PVT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MEM_RX_STATUS_SPEC>> for R

fn from(reader: R<MEM_RX_STATUS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MEM_TX_STATUS_SPEC>> for R

fn from(reader: R<MEM_TX_STATUS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MISC_CONF_SPEC>> for R

fn from(reader: R<MISC_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MISC_SPEC>> for R

fn from(reader: R<MISC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MISC_SPEC>> for R

fn from(reader: R<MISC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MISC_SPEC>> for R

fn from(reader: R<MISC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MISO_DLEN_SPEC>> for R

fn from(reader: R<MISO_DLEN_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MODE_SPEC>> for R

fn from(reader: R<MODE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MOSI_DLEN_SPEC>> for R

fn from(reader: R<MOSI_DLEN_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MS_DLEN_SPEC>> for R

fn from(reader: R<MS_DLEN_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MULT_CONF_SPEC>> for R

fn from(reader: R<MULT_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MULT_DATE_SPEC>> for R

fn from(reader: R<MULT_DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MULT_INT_ENA_SPEC>> for R

fn from(reader: R<MULT_INT_ENA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MULT_INT_RAW_SPEC>> for R

fn from(reader: R<MULT_INT_RAW_SPEC>) -> R

Converts to this type from the input type.

impl From<R<MULT_INT_ST_SPEC>> for R

fn from(reader: R<MULT_INT_ST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<M_MEM_SPEC>> for R

fn from(reader: R<M_MEM_SPEC>) -> R

Converts to this type from the input type.

impl From<R<NEGPULSE_SPEC>> for R

fn from(reader: R<NEGPULSE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<NTIMERS_DATE_SPEC>> for R

fn from(reader: R<NTIMERS_DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ONETIME_SAMPLE_SPEC>> for R

fn from(reader: R<ONETIME_SAMPLE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OPTION1_SPEC>> for R

fn from(reader: R<OPTION1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OPTIONS0_SPEC>> for R

fn from(reader: R<OPTIONS0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OUTFIFO_STATUS_CH0_SPEC>> for R

fn from(reader: R<OUTFIFO_STATUS_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OUT_CONF0_CH0_SPEC>> for R

fn from(reader: R<OUT_CONF0_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OUT_CONF1_CH0_SPEC>> for R

fn from(reader: R<OUT_CONF1_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OUT_DSCR_BF0_CH0_SPEC>> for R

fn from(reader: R<OUT_DSCR_BF0_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OUT_DSCR_BF1_CH0_SPEC>> for R

fn from(reader: R<OUT_DSCR_BF1_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OUT_DSCR_CH0_SPEC>> for R

fn from(reader: R<OUT_DSCR_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OUT_EOF_BFR_DES_ADDR_CH0_SPEC>> for R

fn from(reader: R<OUT_EOF_BFR_DES_ADDR_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OUT_EOF_DES_ADDR_CH0_SPEC>> for R

fn from(reader: R<OUT_EOF_DES_ADDR_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OUT_LINK_CH0_SPEC>> for R

fn from(reader: R<OUT_LINK_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OUT_PERI_SEL_CH0_SPEC>> for R

fn from(reader: R<OUT_PERI_SEL_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OUT_PRI_CH0_SPEC>> for R

fn from(reader: R<OUT_PRI_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OUT_PUSH_CH0_SPEC>> for R

fn from(reader: R<OUT_PUSH_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OUT_SPEC>> for R

fn from(reader: R<OUT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<OUT_STATE_CH0_SPEC>> for R

fn from(reader: R<OUT_STATE_CH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PAD_HOLD_SPEC>> for R

fn from(reader: R<PAD_HOLD_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PCPU_INT_SPEC>> for R

fn from(reader: R<PCPU_INT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PCPU_NMI_INT_SPEC>> for R

fn from(reader: R<PCPU_NMI_INT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PERIP_CLK_EN0_SPEC>> for R

fn from(reader: R<PERIP_CLK_EN0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PERIP_CLK_EN1_SPEC>> for R

fn from(reader: R<PERIP_CLK_EN1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PERIP_RST_EN0_SPEC>> for R

fn from(reader: R<PERIP_RST_EN0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PERIP_RST_EN1_SPEC>> for R

fn from(reader: R<PERIP_RST_EN1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PERI_BACKUP_APB_ADDR_REG_SPEC>> for R

fn from(reader: R<PERI_BACKUP_APB_ADDR_REG_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PERI_BACKUP_CONFIG_REG_SPEC>> for R

fn from(reader: R<PERI_BACKUP_CONFIG_REG_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PERI_BACKUP_INT_ENA_SPEC>> for R

fn from(reader: R<PERI_BACKUP_INT_ENA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PERI_BACKUP_INT_RAW_SPEC>> for R

fn from(reader: R<PERI_BACKUP_INT_RAW_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PERI_BACKUP_INT_ST_SPEC>> for R

fn from(reader: R<PERI_BACKUP_INT_ST_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PERI_BACKUP_MEM_ADDR_REG_SPEC>> for R

fn from(reader: R<PERI_BACKUP_MEM_ADDR_REG_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PGM_CHECK_VALUE0_SPEC>> for R

fn from(reader: R<PGM_CHECK_VALUE0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PGM_CHECK_VALUE1_SPEC>> for R

fn from(reader: R<PGM_CHECK_VALUE1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PGM_CHECK_VALUE2_SPEC>> for R

fn from(reader: R<PGM_CHECK_VALUE2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PGM_DATA0_SPEC>> for R

fn from(reader: R<PGM_DATA0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PGM_DATA1_SPEC>> for R

fn from(reader: R<PGM_DATA1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PGM_DATA2_SPEC>> for R

fn from(reader: R<PGM_DATA2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PGM_DATA3_SPEC>> for R

fn from(reader: R<PGM_DATA3_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PGM_DATA4_SPEC>> for R

fn from(reader: R<PGM_DATA4_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PGM_DATA5_SPEC>> for R

fn from(reader: R<PGM_DATA5_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PGM_DATA6_SPEC>> for R

fn from(reader: R<PGM_DATA6_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PGM_DATA7_SPEC>> for R

fn from(reader: R<PGM_DATA7_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PHYSICAL_ADDRESS_SPEC>> for R

fn from(reader: R<PHYSICAL_ADDRESS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PIF_ACCESS_MONITOR_0_SPEC>> for R

fn from(reader: R<PIF_ACCESS_MONITOR_0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PIF_ACCESS_MONITOR_1_SPEC>> for R

fn from(reader: R<PIF_ACCESS_MONITOR_1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PIF_ACCESS_MONITOR_2_SPEC>> for R

fn from(reader: R<PIF_ACCESS_MONITOR_2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PIF_ACCESS_MONITOR_3_SPEC>> for R

fn from(reader: R<PIF_ACCESS_MONITOR_3_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PIN_CTRL_SPEC>> for R

fn from(reader: R<PIN_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PIN_SPEC>> for R

fn from(reader: R<PIN_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PLAIN_MEM_SPEC>> for R

fn from(reader: R<PLAIN_MEM_SPEC>) -> R

Converts to this type from the input type.

impl From<R<POSPULSE_SPEC>> for R

fn from(reader: R<POSPULSE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<PWC_SPEC>> for R

fn from(reader: R<PWC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK1_DATA0_SPEC>> for R

fn from(reader: R<RD_BLK1_DATA0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK1_DATA1_SPEC>> for R

fn from(reader: R<RD_BLK1_DATA1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK1_DATA2_SPEC>> for R

fn from(reader: R<RD_BLK1_DATA2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK2_DATA0_SPEC>> for R

fn from(reader: R<RD_BLK2_DATA0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK2_DATA1_SPEC>> for R

fn from(reader: R<RD_BLK2_DATA1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK2_DATA2_SPEC>> for R

fn from(reader: R<RD_BLK2_DATA2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK2_DATA3_SPEC>> for R

fn from(reader: R<RD_BLK2_DATA3_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK2_DATA4_SPEC>> for R

fn from(reader: R<RD_BLK2_DATA4_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK2_DATA5_SPEC>> for R

fn from(reader: R<RD_BLK2_DATA5_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK2_DATA6_SPEC>> for R

fn from(reader: R<RD_BLK2_DATA6_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK2_DATA7_SPEC>> for R

fn from(reader: R<RD_BLK2_DATA7_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK3_DATA0_SPEC>> for R

fn from(reader: R<RD_BLK3_DATA0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK3_DATA1_SPEC>> for R

fn from(reader: R<RD_BLK3_DATA1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK3_DATA2_SPEC>> for R

fn from(reader: R<RD_BLK3_DATA2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK3_DATA3_SPEC>> for R

fn from(reader: R<RD_BLK3_DATA3_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK3_DATA4_SPEC>> for R

fn from(reader: R<RD_BLK3_DATA4_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK3_DATA5_SPEC>> for R

fn from(reader: R<RD_BLK3_DATA5_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK3_DATA6_SPEC>> for R

fn from(reader: R<RD_BLK3_DATA6_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_BLK3_DATA7_SPEC>> for R

fn from(reader: R<RD_BLK3_DATA7_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_REPEAT_DATA0_SPEC>> for R

fn from(reader: R<RD_REPEAT_DATA0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_REPEAT_ERR_SPEC>> for R

fn from(reader: R<RD_REPEAT_ERR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_RS_ERR_SPEC>> for R

fn from(reader: R<RD_RS_ERR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_STATUS_SPEC>> for R

fn from(reader: R<RD_STATUS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_STATUS_SPEC>> for R

fn from(reader: R<RD_STATUS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_TIM_CONF_SPEC>> for R

fn from(reader: R<RD_TIM_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RD_WR_DIS_SPEC>> for R

fn from(reader: R<RD_WR_DIS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<REDCY_SIG0_REG_SPEC>> for R

fn from(reader: R<REDCY_SIG0_REG_SPEC>) -> R

Converts to this type from the input type.

impl From<R<REDCY_SIG1_REG_SPEC>> for R

fn from(reader: R<REDCY_SIG1_REG_SPEC>) -> R

Converts to this type from the input type.

impl From<R<REDUNDANT_ECO_CTRL_SPEC>> for R

fn from(reader: R<REDUNDANT_ECO_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<REGCLK_SPEC>> for R

fn from(reader: R<REGCLK_SPEC>) -> R

Converts to this type from the input type.

impl From<R<REG_DATE_REG_SPEC>> for R

fn from(reader: R<REG_DATE_REG_SPEC>) -> R

Converts to this type from the input type.

impl From<R<REG_DATE_SPEC>> for R

fn from(reader: R<REG_DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<REG_DATE_SPEC>> for R

fn from(reader: R<REG_DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RESET_STATE_SPEC>> for R

fn from(reader: R<RESET_STATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RETENTION_CTRL_SPEC>> for R

fn from(reader: R<RETENTION_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RND_DATA_SPEC>> for R

fn from(reader: R<RND_DATA_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ROM_TABLE_LOCK_SPEC>> for R

fn from(reader: R<ROM_TABLE_LOCK_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ROM_TABLE_SPEC>> for R

fn from(reader: R<ROM_TABLE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RS485_CONF_SPEC>> for R

fn from(reader: R<RS485_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RSA_PD_CTRL_SPEC>> for R

fn from(reader: R<RSA_PD_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RTCCALICFG1_SPEC>> for R

fn from(reader: R<RTCCALICFG1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RTCCALICFG2_SPEC>> for R

fn from(reader: R<RTCCALICFG2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RTCCALICFG_SPEC>> for R

fn from(reader: R<RTCCALICFG_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RTC_CNTL_SPEC>> for R

fn from(reader: R<RTC_CNTL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RTC_CORE_INTR_MAP_SPEC>> for R

fn from(reader: R<RTC_CORE_INTR_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RTC_FASTMEM_CONFIG_SPEC>> for R

fn from(reader: R<RTC_FASTMEM_CONFIG_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RTC_FASTMEM_CRC_SPEC>> for R

fn from(reader: R<RTC_FASTMEM_CRC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RXD_CNT_SPEC>> for R

fn from(reader: R<RXD_CNT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RXFIFO_START_ADDR_SPEC>> for R

fn from(reader: R<RXFIFO_START_ADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<RX_FILT_SPEC>> for R

fn from(reader: R<RX_FILT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SAR1DATA_STATUS_SPEC>> for R

fn from(reader: R<SAR1DATA_STATUS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SAR1_STATUS_SPEC>> for R

fn from(reader: R<SAR1_STATUS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SAR2DATA_STATUS_SPEC>> for R

fn from(reader: R<SAR2DATA_STATUS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SAR2_STATUS_SPEC>> for R

fn from(reader: R<SAR2_STATUS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SAR_PATT_TAB1_SPEC>> for R

fn from(reader: R<SAR_PATT_TAB1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SAR_PATT_TAB2_SPEC>> for R

fn from(reader: R<SAR_PATT_TAB2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SCL_HIGH_PERIOD_SPEC>> for R

fn from(reader: R<SCL_HIGH_PERIOD_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SCL_LOW_PERIOD_SPEC>> for R

fn from(reader: R<SCL_LOW_PERIOD_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SCL_MAIN_ST_TIME_OUT_SPEC>> for R

fn from(reader: R<SCL_MAIN_ST_TIME_OUT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SCL_RSTART_SETUP_SPEC>> for R

fn from(reader: R<SCL_RSTART_SETUP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SCL_SP_CONF_SPEC>> for R

fn from(reader: R<SCL_SP_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SCL_START_HOLD_SPEC>> for R

fn from(reader: R<SCL_START_HOLD_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SCL_STOP_HOLD_SPEC>> for R

fn from(reader: R<SCL_STOP_HOLD_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SCL_STOP_SETUP_SPEC>> for R

fn from(reader: R<SCL_STOP_SETUP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SCL_ST_TIME_OUT_SPEC>> for R

fn from(reader: R<SCL_ST_TIME_OUT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SDA_HOLD_SPEC>> for R

fn from(reader: R<SDA_HOLD_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SDA_SAMPLE_SPEC>> for R

fn from(reader: R<SDA_SAMPLE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SDIO_CTRL_SPEC>> for R

fn from(reader: R<SDIO_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SDIO_SELECT_SPEC>> for R

fn from(reader: R<SDIO_SELECT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SENSITIVE_REG_DATE_SPEC>> for R

fn from(reader: R<SENSITIVE_REG_DATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SHA_INT_MAP_SPEC>> for R

fn from(reader: R<SHA_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SLAVE1_SPEC>> for R

fn from(reader: R<SLAVE1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SLAVE_SPEC>> for R

fn from(reader: R<SLAVE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SLEEP_CONF_SPEC>> for R

fn from(reader: R<SLEEP_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SLOW_CLK_CONF_SPEC>> for R

fn from(reader: R<SLOW_CLK_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SLP_REJECT_CAUSE_SPEC>> for R

fn from(reader: R<SLP_REJECT_CAUSE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SLP_REJECT_CONF_SPEC>> for R

fn from(reader: R<SLP_REJECT_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SLP_TIMER0_SPEC>> for R

fn from(reader: R<SLP_TIMER0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SLP_TIMER1_SPEC>> for R

fn from(reader: R<SLP_TIMER1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SLP_WAKEUP_CAUSE_SPEC>> for R

fn from(reader: R<SLP_WAKEUP_CAUSE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SPI_INTR_1_MAP_SPEC>> for R

fn from(reader: R<SPI_INTR_1_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SPI_INTR_2_MAP_SPEC>> for R

fn from(reader: R<SPI_INTR_2_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SPI_MEM_PMS_CTRL_SPEC>> for R

fn from(reader: R<SPI_MEM_PMS_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SPI_MEM_REJECT_ADDR_SPEC>> for R

fn from(reader: R<SPI_MEM_REJECT_ADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SPI_MEM_REJECT_INTR_MAP_SPEC>> for R

fn from(reader: R<SPI_MEM_REJECT_INTR_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SR_SPEC>> for R

fn from(reader: R<SR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<START_SPEC>> for R

fn from(reader: R<START_SPEC>) -> R

Converts to this type from the input type.

impl From<R<STATE0_SPEC>> for R

fn from(reader: R<STATE0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<STATE_SPEC>> for R

fn from(reader: R<STATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<STATUS_NEXT_SPEC>> for R

fn from(reader: R<STATUS_NEXT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<STATUS_SPEC>> for R

fn from(reader: R<STATUS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<STATUS_SPEC>> for R

fn from(reader: R<STATUS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<STATUS_SPEC>> for R

fn from(reader: R<STATUS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<STORE0_SPEC>> for R

fn from(reader: R<STORE0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<STORE1_SPEC>> for R

fn from(reader: R<STORE1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<STORE2_SPEC>> for R

fn from(reader: R<STORE2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<STORE3_SPEC>> for R

fn from(reader: R<STORE3_SPEC>) -> R

Converts to this type from the input type.

impl From<R<STORE4_SPEC>> for R

fn from(reader: R<STORE4_SPEC>) -> R

Converts to this type from the input type.

impl From<R<STORE5_SPEC>> for R

fn from(reader: R<STORE5_SPEC>) -> R

Converts to this type from the input type.

impl From<R<STORE6_SPEC>> for R

fn from(reader: R<STORE6_SPEC>) -> R

Converts to this type from the input type.

impl From<R<STORE7_SPEC>> for R

fn from(reader: R<STORE7_SPEC>) -> R

Converts to this type from the input type.

impl From<R<STRAP_SPEC>> for R

fn from(reader: R<STRAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SUS_STATUS_SPEC>> for R

fn from(reader: R<SUS_STATUS_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SWD_CONF_SPEC>> for R

fn from(reader: R<SWD_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SWD_WPROTECT_SPEC>> for R

fn from(reader: R<SWD_WPROTECT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SWFC_CONF0_SPEC>> for R

fn from(reader: R<SWFC_CONF0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SWFC_CONF1_SPEC>> for R

fn from(reader: R<SWFC_CONF1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SW_CPU_STALL_SPEC>> for R

fn from(reader: R<SW_CPU_STALL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SYSCLK_CONF_SPEC>> for R

fn from(reader: R<SYSCLK_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SYSCLK_CONF_SPEC>> for R

fn from(reader: R<SYSCLK_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SYSTIMER_TARGET0_INT_MAP_SPEC>> for R

fn from(reader: R<SYSTIMER_TARGET0_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SYSTIMER_TARGET1_INT_MAP_SPEC>> for R

fn from(reader: R<SYSTIMER_TARGET1_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<SYSTIMER_TARGET2_INT_MAP_SPEC>> for R

fn from(reader: R<SYSTIMER_TARGET2_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<T0ALARMHI_SPEC>> for R

fn from(reader: R<T0ALARMHI_SPEC>) -> R

Converts to this type from the input type.

impl From<R<T0ALARMLO_SPEC>> for R

fn from(reader: R<T0ALARMLO_SPEC>) -> R

Converts to this type from the input type.

impl From<R<T0CONFIG_SPEC>> for R

fn from(reader: R<T0CONFIG_SPEC>) -> R

Converts to this type from the input type.

impl From<R<T0HI_SPEC>> for R

fn from(reader: R<T0HI_SPEC>) -> R

Converts to this type from the input type.

impl From<R<T0LOADHI_SPEC>> for R

fn from(reader: R<T0LOADHI_SPEC>) -> R

Converts to this type from the input type.

impl From<R<T0LOADLO_SPEC>> for R

fn from(reader: R<T0LOADLO_SPEC>) -> R

Converts to this type from the input type.

impl From<R<T0LO_SPEC>> for R

fn from(reader: R<T0LO_SPEC>) -> R

Converts to this type from the input type.

impl From<R<T0UPDATE_SPEC>> for R

fn from(reader: R<T0UPDATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TARGET0_CONF_SPEC>> for R

fn from(reader: R<TARGET0_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TARGET0_HI_SPEC>> for R

fn from(reader: R<TARGET0_HI_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TARGET0_LO_SPEC>> for R

fn from(reader: R<TARGET0_LO_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TARGET1_CONF_SPEC>> for R

fn from(reader: R<TARGET1_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TARGET1_HI_SPEC>> for R

fn from(reader: R<TARGET1_HI_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TARGET1_LO_SPEC>> for R

fn from(reader: R<TARGET1_LO_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TARGET2_CONF_SPEC>> for R

fn from(reader: R<TARGET2_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TARGET2_HI_SPEC>> for R

fn from(reader: R<TARGET2_HI_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TARGET2_LO_SPEC>> for R

fn from(reader: R<TARGET2_LO_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TG_T0_INT_MAP_SPEC>> for R

fn from(reader: R<TG_T0_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TG_WDT_INT_MAP_SPEC>> for R

fn from(reader: R<TG_WDT_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<THRES0_CTRL_SPEC>> for R

fn from(reader: R<THRES0_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<THRES1_CTRL_SPEC>> for R

fn from(reader: R<THRES1_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<THRES_CTRL_SPEC>> for R

fn from(reader: R<THRES_CTRL_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TICK_CONF_SPEC>> for R

fn from(reader: R<TICK_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TIMER1_SPEC>> for R

fn from(reader: R<TIMER1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TIMER2_SPEC>> for R

fn from(reader: R<TIMER2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TIMER4_SPEC>> for R

fn from(reader: R<TIMER4_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TIMER5_SPEC>> for R

fn from(reader: R<TIMER5_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TIMER_CONF_SPEC>> for R

fn from(reader: R<TIMER_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TIMER_VALUE_SPEC>> for R

fn from(reader: R<TIMER_VALUE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TIME_HIGH0_SPEC>> for R

fn from(reader: R<TIME_HIGH0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TIME_HIGH1_SPEC>> for R

fn from(reader: R<TIME_HIGH1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TIME_LOW0_SPEC>> for R

fn from(reader: R<TIME_LOW0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TIME_LOW1_SPEC>> for R

fn from(reader: R<TIME_LOW1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TIME_UPDATE_SPEC>> for R

fn from(reader: R<TIME_UPDATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TIMING_CALI_SPEC>> for R

fn from(reader: R<TIMING_CALI_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TIMING_CALI_SPEC>> for R

fn from(reader: R<TIMING_CALI_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TO_SPEC>> for R

fn from(reader: R<TO_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TXBRK_CONF_SPEC>> for R

fn from(reader: R<TXBRK_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TXFIFO_START_ADDR_SPEC>> for R

fn from(reader: R<TXFIFO_START_ADDR_SPEC>) -> R

Converts to this type from the input type.

impl From<R<TX_CRC_SPEC>> for R

fn from(reader: R<TX_CRC_SPEC>) -> R

Converts to this type from the input type.

impl From<R<T_LENGTH_SPEC>> for R

fn from(reader: R<T_LENGTH_SPEC>) -> R

Converts to this type from the input type.

impl From<R<T_STRING_SPEC>> for R

fn from(reader: R<T_STRING_SPEC>) -> R

Converts to this type from the input type.

impl From<R<UART1_INTR_MAP_SPEC>> for R

fn from(reader: R<UART1_INTR_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<UART_INTR_MAP_SPEC>> for R

fn from(reader: R<UART_INTR_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<ULP_CP_TIMER_1_SPEC>> for R

fn from(reader: R<ULP_CP_TIMER_1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<UNIT0_LOAD_HI_SPEC>> for R

fn from(reader: R<UNIT0_LOAD_HI_SPEC>) -> R

Converts to this type from the input type.

impl From<R<UNIT0_LOAD_LO_SPEC>> for R

fn from(reader: R<UNIT0_LOAD_LO_SPEC>) -> R

Converts to this type from the input type.

impl From<R<UNIT0_OP_SPEC>> for R

fn from(reader: R<UNIT0_OP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<UNIT0_VALUE_HI_SPEC>> for R

fn from(reader: R<UNIT0_VALUE_HI_SPEC>) -> R

Converts to this type from the input type.

impl From<R<UNIT0_VALUE_LO_SPEC>> for R

fn from(reader: R<UNIT0_VALUE_LO_SPEC>) -> R

Converts to this type from the input type.

impl From<R<UNIT1_LOAD_HI_SPEC>> for R

fn from(reader: R<UNIT1_LOAD_HI_SPEC>) -> R

Converts to this type from the input type.

impl From<R<UNIT1_LOAD_LO_SPEC>> for R

fn from(reader: R<UNIT1_LOAD_LO_SPEC>) -> R

Converts to this type from the input type.

impl From<R<UNIT1_OP_SPEC>> for R

fn from(reader: R<UNIT1_OP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<UNIT1_VALUE_HI_SPEC>> for R

fn from(reader: R<UNIT1_VALUE_HI_SPEC>) -> R

Converts to this type from the input type.

impl From<R<UNIT1_VALUE_LO_SPEC>> for R

fn from(reader: R<UNIT1_VALUE_LO_SPEC>) -> R

Converts to this type from the input type.

impl From<R<USB_CONF_SPEC>> for R

fn from(reader: R<USB_CONF_SPEC>) -> R

Converts to this type from the input type.

impl From<R<USER1_SPEC>> for R

fn from(reader: R<USER1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<USER1_SPEC>> for R

fn from(reader: R<USER1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<USER1_SPEC>> for R

fn from(reader: R<USER1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<USER2_SPEC>> for R

fn from(reader: R<USER2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<USER2_SPEC>> for R

fn from(reader: R<USER2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<USER2_SPEC>> for R

fn from(reader: R<USER2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<USER_SPEC>> for R

fn from(reader: R<USER_SPEC>) -> R

Converts to this type from the input type.

impl From<R<USER_SPEC>> for R

fn from(reader: R<USER_SPEC>) -> R

Converts to this type from the input type.

impl From<R<USER_SPEC>> for R

fn from(reader: R<USER_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W0_SPEC>> for R

fn from(reader: R<W0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W0_SPEC>> for R

fn from(reader: R<W0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W10_SPEC>> for R

fn from(reader: R<W10_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W10_SPEC>> for R

fn from(reader: R<W10_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W11_SPEC>> for R

fn from(reader: R<W11_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W11_SPEC>> for R

fn from(reader: R<W11_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W12_SPEC>> for R

fn from(reader: R<W12_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W12_SPEC>> for R

fn from(reader: R<W12_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W13_SPEC>> for R

fn from(reader: R<W13_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W13_SPEC>> for R

fn from(reader: R<W13_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W14_SPEC>> for R

fn from(reader: R<W14_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W14_SPEC>> for R

fn from(reader: R<W14_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W15_SPEC>> for R

fn from(reader: R<W15_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W15_SPEC>> for R

fn from(reader: R<W15_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W1_SPEC>> for R

fn from(reader: R<W1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W1_SPEC>> for R

fn from(reader: R<W1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W2_SPEC>> for R

fn from(reader: R<W2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W2_SPEC>> for R

fn from(reader: R<W2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W3_SPEC>> for R

fn from(reader: R<W3_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W3_SPEC>> for R

fn from(reader: R<W3_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W4_SPEC>> for R

fn from(reader: R<W4_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W4_SPEC>> for R

fn from(reader: R<W4_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W5_SPEC>> for R

fn from(reader: R<W5_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W5_SPEC>> for R

fn from(reader: R<W5_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W6_SPEC>> for R

fn from(reader: R<W6_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W6_SPEC>> for R

fn from(reader: R<W6_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W7_SPEC>> for R

fn from(reader: R<W7_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W7_SPEC>> for R

fn from(reader: R<W7_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W8_SPEC>> for R

fn from(reader: R<W8_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W8_SPEC>> for R

fn from(reader: R<W8_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W9_SPEC>> for R

fn from(reader: R<W9_SPEC>) -> R

Converts to this type from the input type.

impl From<R<W9_SPEC>> for R

fn from(reader: R<W9_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WAKEUP_STATE_SPEC>> for R

fn from(reader: R<WAKEUP_STATE_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WDTCONFIG0_SPEC>> for R

fn from(reader: R<WDTCONFIG0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WDTCONFIG0_SPEC>> for R

fn from(reader: R<WDTCONFIG0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WDTCONFIG1_SPEC>> for R

fn from(reader: R<WDTCONFIG1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WDTCONFIG1_SPEC>> for R

fn from(reader: R<WDTCONFIG1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WDTCONFIG2_SPEC>> for R

fn from(reader: R<WDTCONFIG2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WDTCONFIG2_SPEC>> for R

fn from(reader: R<WDTCONFIG2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WDTCONFIG3_SPEC>> for R

fn from(reader: R<WDTCONFIG3_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WDTCONFIG3_SPEC>> for R

fn from(reader: R<WDTCONFIG3_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WDTCONFIG4_SPEC>> for R

fn from(reader: R<WDTCONFIG4_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WDTCONFIG4_SPEC>> for R

fn from(reader: R<WDTCONFIG4_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WDTCONFIG5_SPEC>> for R

fn from(reader: R<WDTCONFIG5_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WDTFEED_SPEC>> for R

fn from(reader: R<WDTFEED_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WDTWPROTECT_SPEC>> for R

fn from(reader: R<WDTWPROTECT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WDTWPROTECT_SPEC>> for R

fn from(reader: R<WDTWPROTECT_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WIFI_BB_CFG_2_SPEC>> for R

fn from(reader: R<WIFI_BB_CFG_2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WIFI_BB_CFG_SPEC>> for R

fn from(reader: R<WIFI_BB_CFG_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WIFI_BB_INT_MAP_SPEC>> for R

fn from(reader: R<WIFI_BB_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WIFI_CLK_EN_SPEC>> for R

fn from(reader: R<WIFI_CLK_EN_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WIFI_MAC_NMI_MAP_SPEC>> for R

fn from(reader: R<WIFI_MAC_NMI_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WIFI_PWR_INT_MAP_SPEC>> for R

fn from(reader: R<WIFI_PWR_INT_MAP_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WIFI_RST_EN_SPEC>> for R

fn from(reader: R<WIFI_RST_EN_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WR_TIM_CONF0_SPEC>> for R

fn from(reader: R<WR_TIM_CONF0_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WR_TIM_CONF1_SPEC>> for R

fn from(reader: R<WR_TIM_CONF1_SPEC>) -> R

Converts to this type from the input type.

impl From<R<WR_TIM_CONF2_SPEC>> for R

fn from(reader: R<WR_TIM_CONF2_SPEC>) -> R

Converts to this type from the input type.

impl From<R<XTS_AES_KEY_UPDATE_SPEC>> for R

fn from(reader: R<XTS_AES_KEY_UPDATE_SPEC>) -> R

Converts to this type from the input type.

impl<REG, FI> PartialEq<FI> for R<REG>where
    REG: RegisterSpec,
    <REG as RegisterSpec>::Ux: PartialEq<<REG as RegisterSpec>::Ux> + From<FI>,
    FI: Copy,

fn eq(&self, other: &FI) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.