Struct esp32c2_hal::pac::spi2::din_num::R

pub struct R(_);

Register DIN_NUM reader

Implementations

impl R

pub fn din0_num(&self) -> FieldReaderRaw<u8, u8>

Bits 0:1 - the input signals are delayed by SPI module clock cycles, 0: delayed by 1 cycle, 1: delayed by 2 cycles,… Can be configured in CONF state.

pub fn din1_num(&self) -> FieldReaderRaw<u8, u8>

Bits 2:3 - the input signals are delayed by SPI module clock cycles, 0: delayed by 1 cycle, 1: delayed by 2 cycles,… Can be configured in CONF state.

pub fn din2_num(&self) -> FieldReaderRaw<u8, u8>

Bits 4:5 - the input signals are delayed by SPI module clock cycles, 0: delayed by 1 cycle, 1: delayed by 2 cycles,… Can be configured in CONF state.

pub fn din3_num(&self) -> FieldReaderRaw<u8, u8>

Bits 6:7 - the input signals are delayed by SPI module clock cycles, 0: delayed by 1 cycle, 1: delayed by 2 cycles,… Can be configured in CONF state.

pub fn din4_num(&self) -> FieldReaderRaw<u8, u8>

Bits 8:9 - the input signals are delayed by SPI module clock cycles, 0: delayed by 1 cycle, 1: delayed by 2 cycles,… Can be configured in CONF state.

pub fn din5_num(&self) -> FieldReaderRaw<u8, u8>

Bits 10:11 - the input signals are delayed by SPI module clock cycles, 0: delayed by 1 cycle, 1: delayed by 2 cycles,… Can be configured in CONF state.

pub fn din6_num(&self) -> FieldReaderRaw<u8, u8>

Bits 12:13 - the input signals are delayed by SPI module clock cycles, 0: delayed by 1 cycle, 1: delayed by 2 cycles,… Can be configured in CONF state.

pub fn din7_num(&self) -> FieldReaderRaw<u8, u8>

Bits 14:15 - the input signals are delayed by SPI module clock cycles, 0: delayed by 1 cycle, 1: delayed by 2 cycles,… Can be configured in CONF state.

Methods from Deref<Target = R<DIN_NUM_SPEC>>

pub fn bits(&self) -> <REG as RegisterSpec>::Ux

Reads raw bits from register.

Trait Implementations

impl Deref for R

type Target = R<DIN_NUM_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &<R as Deref>::Target

Dereferences the value.

impl From<R<DIN_NUM_SPEC>> for R

fn from(reader: R<DIN_NUM_SPEC>) -> R

Converts to this type from the input type.