stm32ral 0.8.0

#![allow(non_snake_case, non_upper_case_globals)]
#![allow(non_camel_case_types)]
//! SDMMC1
//!
//! Used by: stm32mp153, stm32mp157

use crate::{RORegister, RWRegister};
#[cfg(not(feature = "nosync"))]
use core::marker::PhantomData;

/// SDMMC power control register
pub mod SDMMC_POWER {

    /// PWRCTRL
    pub mod PWRCTRL {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (2 bits: 0b11 << 0)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// VSWITCH
    pub mod VSWITCH {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (1 bit: 1 << 2)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// VSWITCHEN
    pub mod VSWITCHEN {
        /// Offset (3 bits)
        pub const offset: u32 = 3;
        /// Mask (1 bit: 1 << 3)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DIRPOL
    pub mod DIRPOL {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (1 bit: 1 << 4)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_CLKCR register controls the SDMMC_CK output clock, the sdmmc_rx_ck receive clock, and the bus width.
pub mod SDMMC_CLKCR {

    /// CLKDIV
    pub mod CLKDIV {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (10 bits: 0x3ff << 0)
        pub const mask: u32 = 0x3ff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// PWRSAV
    pub mod PWRSAV {
        /// Offset (12 bits)
        pub const offset: u32 = 12;
        /// Mask (1 bit: 1 << 12)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// WIDBUS
    pub mod WIDBUS {
        /// Offset (14 bits)
        pub const offset: u32 = 14;
        /// Mask (2 bits: 0b11 << 14)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// NEGEDGE
    pub mod NEGEDGE {
        /// Offset (16 bits)
        pub const offset: u32 = 16;
        /// Mask (1 bit: 1 << 16)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// HWFC_EN
    pub mod HWFC_EN {
        /// Offset (17 bits)
        pub const offset: u32 = 17;
        /// Mask (1 bit: 1 << 17)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DDR
    pub mod DDR {
        /// Offset (18 bits)
        pub const offset: u32 = 18;
        /// Mask (1 bit: 1 << 18)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// BUSSPEED
    pub mod BUSSPEED {
        /// Offset (19 bits)
        pub const offset: u32 = 19;
        /// Mask (1 bit: 1 << 19)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// SELCLKRX
    pub mod SELCLKRX {
        /// Offset (20 bits)
        pub const offset: u32 = 20;
        /// Mask (2 bits: 0b11 << 20)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_ARGR register contains a 32-bit command argument, which is sent to a card as part of a command message.
pub mod SDMMC_ARGR {

    /// CMDARG
    pub mod CMDARG {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (32 bits: 0xffffffff << 0)
        pub const mask: u32 = 0xffffffff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_CMDR register contains the command index and command type bits. The command index is sent to a card as part of a command message. The command type bits control the command path state machine (CPSM).
pub mod SDMMC_CMDR {

    /// CMDINDEX
    pub mod CMDINDEX {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (6 bits: 0x3f << 0)
        pub const mask: u32 = 0x3f << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CMDTRANS
    pub mod CMDTRANS {
        /// Offset (6 bits)
        pub const offset: u32 = 6;
        /// Mask (1 bit: 1 << 6)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CMDSTOP
    pub mod CMDSTOP {
        /// Offset (7 bits)
        pub const offset: u32 = 7;
        /// Mask (1 bit: 1 << 7)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// WAITRESP
    pub mod WAITRESP {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (2 bits: 0b11 << 8)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// WAITINT
    pub mod WAITINT {
        /// Offset (10 bits)
        pub const offset: u32 = 10;
        /// Mask (1 bit: 1 << 10)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// WAITPEND
    pub mod WAITPEND {
        /// Offset (11 bits)
        pub const offset: u32 = 11;
        /// Mask (1 bit: 1 << 11)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CPSMEN
    pub mod CPSMEN {
        /// Offset (12 bits)
        pub const offset: u32 = 12;
        /// Mask (1 bit: 1 << 12)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DTHOLD
    pub mod DTHOLD {
        /// Offset (13 bits)
        pub const offset: u32 = 13;
        /// Mask (1 bit: 1 << 13)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// BOOTMODE
    pub mod BOOTMODE {
        /// Offset (14 bits)
        pub const offset: u32 = 14;
        /// Mask (1 bit: 1 << 14)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// BOOTEN
    pub mod BOOTEN {
        /// Offset (15 bits)
        pub const offset: u32 = 15;
        /// Mask (1 bit: 1 << 15)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CMDSUSPEND
    pub mod CMDSUSPEND {
        /// Offset (16 bits)
        pub const offset: u32 = 16;
        /// Mask (1 bit: 1 << 16)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_RESPCMDR register contains the command index field of the last command response received. If the command response transmission does not contain the command index field (long or OCR response), the RESPCMD field is unknown, although it must contain 111111b (the value of the reserved field from the response).
pub mod SDMMC_RESPCMDR {

    /// RESPCMD
    pub mod RESPCMD {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (6 bits: 0x3f << 0)
        pub const mask: u32 = 0x3f << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response.
pub mod SDMMC_RESP1R {

    /// CARDSTATUS1
    pub mod CARDSTATUS1 {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (32 bits: 0xffffffff << 0)
        pub const mask: u32 = 0xffffffff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response.
pub mod SDMMC_RESP2R {

    /// CARDSTATUS2
    pub mod CARDSTATUS2 {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (32 bits: 0xffffffff << 0)
        pub const mask: u32 = 0xffffffff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response.
pub mod SDMMC_RESP3R {

    /// CARDSTATUS3
    pub mod CARDSTATUS3 {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (32 bits: 0xffffffff << 0)
        pub const mask: u32 = 0xffffffff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response.
pub mod SDMMC_RESP4R {

    /// CARDSTATUS4
    pub mod CARDSTATUS4 {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (32 bits: 0xffffffff << 0)
        pub const mask: u32 = 0xffffffff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_DTIMER register contains the data timeout period, in card bus clock periods. A counter loads the value from the SDMMC_DTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_R or Busy state. If the timer reaches 0 while the DPSM is in either of these states, the timeout status flag is set.
pub mod SDMMC_DTIMER {

    /// DATATIME
    pub mod DATATIME {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (32 bits: 0xffffffff << 0)
        pub const mask: u32 = 0xffffffff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_DLENR register contains the number of data bytes to be transferred. The value is loaded into the data counter when data transfer starts.
pub mod SDMMC_DLENR {

    /// DATALENGTH
    pub mod DATALENGTH {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (25 bits: 0x1ffffff << 0)
        pub const mask: u32 = 0x1ffffff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_DCTRL register control the data path state machine (DPSM).
pub mod SDMMC_DCTRL {

    /// DTEN
    pub mod DTEN {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (1 bit: 1 << 0)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DTDIR
    pub mod DTDIR {
        /// Offset (1 bits)
        pub const offset: u32 = 1;
        /// Mask (1 bit: 1 << 1)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DTMODE
    pub mod DTMODE {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (2 bits: 0b11 << 2)
        pub const mask: u32 = 0b11 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DBLOCKSIZE
    pub mod DBLOCKSIZE {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (4 bits: 0b1111 << 4)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// RWSTART
    pub mod RWSTART {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (1 bit: 1 << 8)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// RWSTOP
    pub mod RWSTOP {
        /// Offset (9 bits)
        pub const offset: u32 = 9;
        /// Mask (1 bit: 1 << 9)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// RWMOD
    pub mod RWMOD {
        /// Offset (10 bits)
        pub const offset: u32 = 10;
        /// Mask (1 bit: 1 << 10)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// SDIOEN
    pub mod SDIOEN {
        /// Offset (11 bits)
        pub const offset: u32 = 11;
        /// Mask (1 bit: 1 << 11)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// BOOTACKEN
    pub mod BOOTACKEN {
        /// Offset (12 bits)
        pub const offset: u32 = 12;
        /// Mask (1 bit: 1 << 12)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// FIFORST
    pub mod FIFORST {
        /// Offset (13 bits)
        pub const offset: u32 = 13;
        /// Mask (1 bit: 1 << 13)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_DCNTR register loads the value from the data length register (see SDMMC_DLENR) when the DPSM moves from the Idle state to the Wait_R or Wait_S state. As data is transferred, the counter decrements the value until it reaches 0. The DPSM then moves to the Idle state and when there has been no error, the data status end flag (DATAEND) is set.
pub mod SDMMC_DCNTR {

    /// DATACOUNT
    pub mod DATACOUNT {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (25 bits: 0x1ffffff << 0)
        pub const mask: u32 = 0x1ffffff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_STAR register is a read-only register. It contains two types of flag: Static flags (bits \[28, 21, 11:0\]): these bits remain asserted until they are cleared by writing to the SDMMC interrupt Clear register (see SDMMC_ICR) Dynamic flags (bits \[20:12\]): these bits change state depending on the state of the underlying logic (for example, FIFO full and empty flags are asserted and de-asserted as data while written to the FIFO)
pub mod SDMMC_STAR {

    /// CCRCFAIL
    pub mod CCRCFAIL {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (1 bit: 1 << 0)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DCRCFAIL
    pub mod DCRCFAIL {
        /// Offset (1 bits)
        pub const offset: u32 = 1;
        /// Mask (1 bit: 1 << 1)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CTIMEOUT
    pub mod CTIMEOUT {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (1 bit: 1 << 2)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DTIMEOUT
    pub mod DTIMEOUT {
        /// Offset (3 bits)
        pub const offset: u32 = 3;
        /// Mask (1 bit: 1 << 3)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// TXUNDERR
    pub mod TXUNDERR {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (1 bit: 1 << 4)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// RXOVERR
    pub mod RXOVERR {
        /// Offset (5 bits)
        pub const offset: u32 = 5;
        /// Mask (1 bit: 1 << 5)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CMDREND
    pub mod CMDREND {
        /// Offset (6 bits)
        pub const offset: u32 = 6;
        /// Mask (1 bit: 1 << 6)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CMDSENT
    pub mod CMDSENT {
        /// Offset (7 bits)
        pub const offset: u32 = 7;
        /// Mask (1 bit: 1 << 7)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DATAEND
    pub mod DATAEND {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (1 bit: 1 << 8)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DHOLD
    pub mod DHOLD {
        /// Offset (9 bits)
        pub const offset: u32 = 9;
        /// Mask (1 bit: 1 << 9)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DBCKEND
    pub mod DBCKEND {
        /// Offset (10 bits)
        pub const offset: u32 = 10;
        /// Mask (1 bit: 1 << 10)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DABORT
    pub mod DABORT {
        /// Offset (11 bits)
        pub const offset: u32 = 11;
        /// Mask (1 bit: 1 << 11)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DPSMACT
    pub mod DPSMACT {
        /// Offset (12 bits)
        pub const offset: u32 = 12;
        /// Mask (1 bit: 1 << 12)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CPSMACT
    pub mod CPSMACT {
        /// Offset (13 bits)
        pub const offset: u32 = 13;
        /// Mask (1 bit: 1 << 13)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// TXFIFOHE
    pub mod TXFIFOHE {
        /// Offset (14 bits)
        pub const offset: u32 = 14;
        /// Mask (1 bit: 1 << 14)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// RXFIFOHF
    pub mod RXFIFOHF {
        /// Offset (15 bits)
        pub const offset: u32 = 15;
        /// Mask (1 bit: 1 << 15)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// TXFIFOF
    pub mod TXFIFOF {
        /// Offset (16 bits)
        pub const offset: u32 = 16;
        /// Mask (1 bit: 1 << 16)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// RXFIFOF
    pub mod RXFIFOF {
        /// Offset (17 bits)
        pub const offset: u32 = 17;
        /// Mask (1 bit: 1 << 17)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// TXFIFOE
    pub mod TXFIFOE {
        /// Offset (18 bits)
        pub const offset: u32 = 18;
        /// Mask (1 bit: 1 << 18)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// RXFIFOE
    pub mod RXFIFOE {
        /// Offset (19 bits)
        pub const offset: u32 = 19;
        /// Mask (1 bit: 1 << 19)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// BUSYD0
    pub mod BUSYD0 {
        /// Offset (20 bits)
        pub const offset: u32 = 20;
        /// Mask (1 bit: 1 << 20)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// BUSYD0END
    pub mod BUSYD0END {
        /// Offset (21 bits)
        pub const offset: u32 = 21;
        /// Mask (1 bit: 1 << 21)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// SDIOIT
    pub mod SDIOIT {
        /// Offset (22 bits)
        pub const offset: u32 = 22;
        /// Mask (1 bit: 1 << 22)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// ACKFAIL
    pub mod ACKFAIL {
        /// Offset (23 bits)
        pub const offset: u32 = 23;
        /// Mask (1 bit: 1 << 23)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// ACKTIMEOUT
    pub mod ACKTIMEOUT {
        /// Offset (24 bits)
        pub const offset: u32 = 24;
        /// Mask (1 bit: 1 << 24)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// VSWEND
    pub mod VSWEND {
        /// Offset (25 bits)
        pub const offset: u32 = 25;
        /// Mask (1 bit: 1 << 25)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CKSTOP
    pub mod CKSTOP {
        /// Offset (26 bits)
        pub const offset: u32 = 26;
        /// Mask (1 bit: 1 << 26)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// IDMATE
    pub mod IDMATE {
        /// Offset (27 bits)
        pub const offset: u32 = 27;
        /// Mask (1 bit: 1 << 27)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// IDMABTC
    pub mod IDMABTC {
        /// Offset (28 bits)
        pub const offset: u32 = 28;
        /// Mask (1 bit: 1 << 28)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_ICR register is a write-only register. Writing a bit with 1 clears the corresponding bit in the SDMMC_STAR status register.
pub mod SDMMC_ICR {

    /// CCRCFAILC
    pub mod CCRCFAILC {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (1 bit: 1 << 0)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DCRCFAILC
    pub mod DCRCFAILC {
        /// Offset (1 bits)
        pub const offset: u32 = 1;
        /// Mask (1 bit: 1 << 1)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CTIMEOUTC
    pub mod CTIMEOUTC {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (1 bit: 1 << 2)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DTIMEOUTC
    pub mod DTIMEOUTC {
        /// Offset (3 bits)
        pub const offset: u32 = 3;
        /// Mask (1 bit: 1 << 3)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// TXUNDERRC
    pub mod TXUNDERRC {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (1 bit: 1 << 4)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// RXOVERRC
    pub mod RXOVERRC {
        /// Offset (5 bits)
        pub const offset: u32 = 5;
        /// Mask (1 bit: 1 << 5)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CMDRENDC
    pub mod CMDRENDC {
        /// Offset (6 bits)
        pub const offset: u32 = 6;
        /// Mask (1 bit: 1 << 6)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CMDSENTC
    pub mod CMDSENTC {
        /// Offset (7 bits)
        pub const offset: u32 = 7;
        /// Mask (1 bit: 1 << 7)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DATAENDC
    pub mod DATAENDC {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (1 bit: 1 << 8)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DHOLDC
    pub mod DHOLDC {
        /// Offset (9 bits)
        pub const offset: u32 = 9;
        /// Mask (1 bit: 1 << 9)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DBCKENDC
    pub mod DBCKENDC {
        /// Offset (10 bits)
        pub const offset: u32 = 10;
        /// Mask (1 bit: 1 << 10)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DABORTC
    pub mod DABORTC {
        /// Offset (11 bits)
        pub const offset: u32 = 11;
        /// Mask (1 bit: 1 << 11)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// BUSYD0ENDC
    pub mod BUSYD0ENDC {
        /// Offset (21 bits)
        pub const offset: u32 = 21;
        /// Mask (1 bit: 1 << 21)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// SDIOITC
    pub mod SDIOITC {
        /// Offset (22 bits)
        pub const offset: u32 = 22;
        /// Mask (1 bit: 1 << 22)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// ACKFAILC
    pub mod ACKFAILC {
        /// Offset (23 bits)
        pub const offset: u32 = 23;
        /// Mask (1 bit: 1 << 23)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// ACKTIMEOUTC
    pub mod ACKTIMEOUTC {
        /// Offset (24 bits)
        pub const offset: u32 = 24;
        /// Mask (1 bit: 1 << 24)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// VSWENDC
    pub mod VSWENDC {
        /// Offset (25 bits)
        pub const offset: u32 = 25;
        /// Mask (1 bit: 1 << 25)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CKSTOPC
    pub mod CKSTOPC {
        /// Offset (26 bits)
        pub const offset: u32 = 26;
        /// Mask (1 bit: 1 << 26)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// IDMATEC
    pub mod IDMATEC {
        /// Offset (27 bits)
        pub const offset: u32 = 27;
        /// Mask (1 bit: 1 << 27)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// IDMABTCC
    pub mod IDMABTCC {
        /// Offset (28 bits)
        pub const offset: u32 = 28;
        /// Mask (1 bit: 1 << 28)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The interrupt mask register determines which status flags generate an interrupt request by setting the corresponding bit to 1.
pub mod SDMMC_MASKR {

    /// CCRCFAILIE
    pub mod CCRCFAILIE {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (1 bit: 1 << 0)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DCRCFAILIE
    pub mod DCRCFAILIE {
        /// Offset (1 bits)
        pub const offset: u32 = 1;
        /// Mask (1 bit: 1 << 1)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CTIMEOUTIE
    pub mod CTIMEOUTIE {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (1 bit: 1 << 2)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DTIMEOUTIE
    pub mod DTIMEOUTIE {
        /// Offset (3 bits)
        pub const offset: u32 = 3;
        /// Mask (1 bit: 1 << 3)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// TXUNDERRIE
    pub mod TXUNDERRIE {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (1 bit: 1 << 4)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// RXOVERRIE
    pub mod RXOVERRIE {
        /// Offset (5 bits)
        pub const offset: u32 = 5;
        /// Mask (1 bit: 1 << 5)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CMDRENDIE
    pub mod CMDRENDIE {
        /// Offset (6 bits)
        pub const offset: u32 = 6;
        /// Mask (1 bit: 1 << 6)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CMDSENTIE
    pub mod CMDSENTIE {
        /// Offset (7 bits)
        pub const offset: u32 = 7;
        /// Mask (1 bit: 1 << 7)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DATAENDIE
    pub mod DATAENDIE {
        /// Offset (8 bits)
        pub const offset: u32 = 8;
        /// Mask (1 bit: 1 << 8)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DHOLDIE
    pub mod DHOLDIE {
        /// Offset (9 bits)
        pub const offset: u32 = 9;
        /// Mask (1 bit: 1 << 9)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DBCKENDIE
    pub mod DBCKENDIE {
        /// Offset (10 bits)
        pub const offset: u32 = 10;
        /// Mask (1 bit: 1 << 10)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// DABORTIE
    pub mod DABORTIE {
        /// Offset (11 bits)
        pub const offset: u32 = 11;
        /// Mask (1 bit: 1 << 11)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// TXFIFOHEIE
    pub mod TXFIFOHEIE {
        /// Offset (14 bits)
        pub const offset: u32 = 14;
        /// Mask (1 bit: 1 << 14)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// RXFIFOHFIE
    pub mod RXFIFOHFIE {
        /// Offset (15 bits)
        pub const offset: u32 = 15;
        /// Mask (1 bit: 1 << 15)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// RXFIFOFIE
    pub mod RXFIFOFIE {
        /// Offset (17 bits)
        pub const offset: u32 = 17;
        /// Mask (1 bit: 1 << 17)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// TXFIFOEIE
    pub mod TXFIFOEIE {
        /// Offset (18 bits)
        pub const offset: u32 = 18;
        /// Mask (1 bit: 1 << 18)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// BUSYD0ENDIE
    pub mod BUSYD0ENDIE {
        /// Offset (21 bits)
        pub const offset: u32 = 21;
        /// Mask (1 bit: 1 << 21)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// SDIOITIE
    pub mod SDIOITIE {
        /// Offset (22 bits)
        pub const offset: u32 = 22;
        /// Mask (1 bit: 1 << 22)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// ACKFAILIE
    pub mod ACKFAILIE {
        /// Offset (23 bits)
        pub const offset: u32 = 23;
        /// Mask (1 bit: 1 << 23)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// ACKTIMEOUTIE
    pub mod ACKTIMEOUTIE {
        /// Offset (24 bits)
        pub const offset: u32 = 24;
        /// Mask (1 bit: 1 << 24)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// VSWENDIE
    pub mod VSWENDIE {
        /// Offset (25 bits)
        pub const offset: u32 = 25;
        /// Mask (1 bit: 1 << 25)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// CKSTOPIE
    pub mod CKSTOPIE {
        /// Offset (26 bits)
        pub const offset: u32 = 26;
        /// Mask (1 bit: 1 << 26)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// IDMABTCIE
    pub mod IDMABTCIE {
        /// Offset (28 bits)
        pub const offset: u32 = 28;
        /// Mask (1 bit: 1 << 28)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_ACKTIMER register contains the acknowledgment timeout period, in SDMMC_CK bus clock periods. A counter loads the value from the SDMMC_ACKTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_Ack state. If the timer reaches 0 while the DPSM is in this states, the acknowledgment timeout status flag is set.
pub mod SDMMC_ACKTIMER {

    /// ACKTIME
    pub mod ACKTIME {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (25 bits: 0x1ffffff << 0)
        pub const mask: u32 = 0x1ffffff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The receive and transmit FIFOs can be read or written as 32-bit wide registers. The FIFOs contain 32 entries on 32 sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO.
pub mod SDMMC_IDMACTRLR {

    /// IDMAEN
    pub mod IDMAEN {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (1 bit: 1 << 0)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// IDMABMODE
    pub mod IDMABMODE {
        /// Offset (1 bits)
        pub const offset: u32 = 1;
        /// Mask (1 bit: 1 << 1)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_IDMABSIZER register contains the buffer size when in linked list configuration.
pub mod SDMMC_IDMABSIZER {

    /// IDMABNDT
    pub mod IDMABNDT {
        /// Offset (5 bits)
        pub const offset: u32 = 5;
        /// Mask (12 bits: 0xfff << 5)
        pub const mask: u32 = 0xfff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The SDMMC_IDMABASER register contains the memory buffer base address in single buffer configuration and linked list configuration.
pub mod SDMMC_IDMABASER {

    /// IDMABASE
    pub mod IDMABASE {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (32 bits: 0xffffffff << 0)
        pub const mask: u32 = 0xffffffff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// SDMMC IDMA linked list address register
pub mod SDMMC_IDMALAR {

    /// IDMALA
    pub mod IDMALA {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (14 bits: 0x3fff << 2)
        pub const mask: u32 = 0x3fff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// ABR
    pub mod ABR {
        /// Offset (29 bits)
        pub const offset: u32 = 29;
        /// Mask (1 bit: 1 << 29)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// ULS
    pub mod ULS {
        /// Offset (30 bits)
        pub const offset: u32 = 30;
        /// Mask (1 bit: 1 << 30)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// ULA
    pub mod ULA {
        /// Offset (31 bits)
        pub const offset: u32 = 31;
        /// Mask (1 bit: 1 << 31)
        pub const mask: u32 = 1 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// SDMMC IDMA linked list memory base register
pub mod SDMMC_IDMABAR {

    /// IDMABA
    pub mod IDMABA {
        /// Offset (2 bits)
        pub const offset: u32 = 2;
        /// Mask (30 bits: 0x3fffffff << 2)
        pub const mask: u32 = 0x3fffffff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR0 {

    /// FIFODATA
    pub mod FIFODATA {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (32 bits: 0xffffffff << 0)
        pub const mask: u32 = 0xffffffff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR1 {
    pub use super::SDMMC_FIFOR0::FIFODATA;
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR2 {
    pub use super::SDMMC_FIFOR0::FIFODATA;
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR3 {
    pub use super::SDMMC_FIFOR0::FIFODATA;
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR4 {
    pub use super::SDMMC_FIFOR0::FIFODATA;
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR5 {
    pub use super::SDMMC_FIFOR0::FIFODATA;
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR6 {
    pub use super::SDMMC_FIFOR0::FIFODATA;
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR7 {
    pub use super::SDMMC_FIFOR0::FIFODATA;
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR8 {
    pub use super::SDMMC_FIFOR0::FIFODATA;
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR9 {
    pub use super::SDMMC_FIFOR0::FIFODATA;
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR10 {
    pub use super::SDMMC_FIFOR0::FIFODATA;
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR11 {
    pub use super::SDMMC_FIFOR0::FIFODATA;
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR12 {
    pub use super::SDMMC_FIFOR0::FIFODATA;
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR13 {
    pub use super::SDMMC_FIFOR0::FIFODATA;
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR14 {
    pub use super::SDMMC_FIFOR0::FIFODATA;
}

/// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
pub mod SDMMC_FIFOR15 {
    pub use super::SDMMC_FIFOR0::FIFODATA;
}

/// SDMMC version register
pub mod SDMMC_VERR {

    /// MINREV
    pub mod MINREV {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (4 bits: 0b1111 << 0)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }

    /// MAJREV
    pub mod MAJREV {
        /// Offset (4 bits)
        pub const offset: u32 = 4;
        /// Mask (4 bits: 0b1111 << 4)
        pub const mask: u32 = 0b1111 << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// SDMMC identification register
pub mod SDMMC_IPIDR {

    /// IP_ID
    pub mod IP_ID {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (32 bits: 0xffffffff << 0)
        pub const mask: u32 = 0xffffffff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}

/// SDMMC size ID register
pub mod SDMMC_SIDR {

    /// SID
    pub mod SID {
        /// Offset (0 bits)
        pub const offset: u32 = 0;
        /// Mask (32 bits: 0xffffffff << 0)
        pub const mask: u32 = 0xffffffff << offset;
        /// Read-only values (empty)
        pub mod R {}
        /// Write-only values (empty)
        pub mod W {}
        /// Read-write values (empty)
        pub mod RW {}
    }
}
#[repr(C)]
pub struct RegisterBlock {
    /// SDMMC power control register
    pub SDMMC_POWER: RWRegister<u32>,

    /// The SDMMC_CLKCR register controls the SDMMC_CK output clock, the sdmmc_rx_ck receive clock, and the bus width.
    pub SDMMC_CLKCR: RWRegister<u32>,

    /// The SDMMC_ARGR register contains a 32-bit command argument, which is sent to a card as part of a command message.
    pub SDMMC_ARGR: RWRegister<u32>,

    /// The SDMMC_CMDR register contains the command index and command type bits. The command index is sent to a card as part of a command message. The command type bits control the command path state machine (CPSM).
    pub SDMMC_CMDR: RWRegister<u32>,

    /// The SDMMC_RESPCMDR register contains the command index field of the last command response received. If the command response transmission does not contain the command index field (long or OCR response), the RESPCMD field is unknown, although it must contain 111111b (the value of the reserved field from the response).
    pub SDMMC_RESPCMDR: RORegister<u32>,

    /// The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response.
    pub SDMMC_RESP1R: RORegister<u32>,

    /// The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response.
    pub SDMMC_RESP2R: RORegister<u32>,

    /// The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response.
    pub SDMMC_RESP3R: RORegister<u32>,

    /// The SDMMC_RESP1/2/3/4R registers contain the status of a card, which is part of the received response.
    pub SDMMC_RESP4R: RORegister<u32>,

    /// The SDMMC_DTIMER register contains the data timeout period, in card bus clock periods. A counter loads the value from the SDMMC_DTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_R or Busy state. If the timer reaches 0 while the DPSM is in either of these states, the timeout status flag is set.
    pub SDMMC_DTIMER: RWRegister<u32>,

    /// The SDMMC_DLENR register contains the number of data bytes to be transferred. The value is loaded into the data counter when data transfer starts.
    pub SDMMC_DLENR: RWRegister<u32>,

    /// The SDMMC_DCTRL register control the data path state machine (DPSM).
    pub SDMMC_DCTRL: RWRegister<u32>,

    /// The SDMMC_DCNTR register loads the value from the data length register (see SDMMC_DLENR) when the DPSM moves from the Idle state to the Wait_R or Wait_S state. As data is transferred, the counter decrements the value until it reaches 0. The DPSM then moves to the Idle state and when there has been no error, the data status end flag (DATAEND) is set.
    pub SDMMC_DCNTR: RORegister<u32>,

    /// The SDMMC_STAR register is a read-only register. It contains two types of flag: Static flags (bits \[28, 21, 11:0\]): these bits remain asserted until they are cleared by writing to the SDMMC interrupt Clear register (see SDMMC_ICR) Dynamic flags (bits \[20:12\]): these bits change state depending on the state of the underlying logic (for example, FIFO full and empty flags are asserted and de-asserted as data while written to the FIFO)
    pub SDMMC_STAR: RORegister<u32>,

    /// The SDMMC_ICR register is a write-only register. Writing a bit with 1 clears the corresponding bit in the SDMMC_STAR status register.
    pub SDMMC_ICR: RWRegister<u32>,

    /// The interrupt mask register determines which status flags generate an interrupt request by setting the corresponding bit to 1.
    pub SDMMC_MASKR: RWRegister<u32>,

    /// The SDMMC_ACKTIMER register contains the acknowledgment timeout period, in SDMMC_CK bus clock periods. A counter loads the value from the SDMMC_ACKTIMER register, and starts decrementing when the data path state machine (DPSM) enters the Wait_Ack state. If the timer reaches 0 while the DPSM is in this states, the acknowledgment timeout status flag is set.
    pub SDMMC_ACKTIMER: RWRegister<u32>,

    _reserved1: [u8; 12],

    /// The receive and transmit FIFOs can be read or written as 32-bit wide registers. The FIFOs contain 32 entries on 32 sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO.
    pub SDMMC_IDMACTRLR: RWRegister<u32>,

    /// The SDMMC_IDMABSIZER register contains the buffer size when in linked list configuration.
    pub SDMMC_IDMABSIZER: RWRegister<u32>,

    /// The SDMMC_IDMABASER register contains the memory buffer base address in single buffer configuration and linked list configuration.
    pub SDMMC_IDMABASER: RWRegister<u32>,

    _reserved2: [u8; 8],

    /// SDMMC IDMA linked list address register
    pub SDMMC_IDMALAR: RWRegister<u32>,

    /// SDMMC IDMA linked list memory base register
    pub SDMMC_IDMABAR: RWRegister<u32>,

    _reserved3: [u8; 20],

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR0: RWRegister<u32>,

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR1: RWRegister<u32>,

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR2: RWRegister<u32>,

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR3: RWRegister<u32>,

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR4: RWRegister<u32>,

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR5: RWRegister<u32>,

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR6: RWRegister<u32>,

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR7: RWRegister<u32>,

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR8: RWRegister<u32>,

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR9: RWRegister<u32>,

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR10: RWRegister<u32>,

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR11: RWRegister<u32>,

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR12: RWRegister<u32>,

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR13: RWRegister<u32>,

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR14: RWRegister<u32>,

    /// The receive and transmit FIFOs can be only read or written as word (32-bit) wide registers. The FIFOs contain 16 entries on sequential addresses. This allows the CPU to use its load and store multiple operands to read from/write to the FIFO. The FIFO register interface takes care of correct data alignment inside the FIFO, the FIFO register address used by the CPU does matter. When accessing SDMMC_FIFOR with half word or byte access an AHB bus fault is generated.
    pub SDMMC_FIFOR15: RWRegister<u32>,

    _reserved4: [u8; 820],

    /// SDMMC version register
    pub SDMMC_VERR: RORegister<u32>,

    /// SDMMC identification register
    pub SDMMC_IPIDR: RORegister<u32>,

    /// SDMMC size ID register
    pub SDMMC_SIDR: RORegister<u32>,
}
pub struct ResetValues {
    pub SDMMC_POWER: u32,
    pub SDMMC_CLKCR: u32,
    pub SDMMC_ARGR: u32,
    pub SDMMC_CMDR: u32,
    pub SDMMC_RESPCMDR: u32,
    pub SDMMC_RESP1R: u32,
    pub SDMMC_RESP2R: u32,
    pub SDMMC_RESP3R: u32,
    pub SDMMC_RESP4R: u32,
    pub SDMMC_DTIMER: u32,
    pub SDMMC_DLENR: u32,
    pub SDMMC_DCTRL: u32,
    pub SDMMC_DCNTR: u32,
    pub SDMMC_STAR: u32,
    pub SDMMC_ICR: u32,
    pub SDMMC_MASKR: u32,
    pub SDMMC_ACKTIMER: u32,
    pub SDMMC_IDMACTRLR: u32,
    pub SDMMC_IDMABSIZER: u32,
    pub SDMMC_IDMABASER: u32,
    pub SDMMC_IDMALAR: u32,
    pub SDMMC_IDMABAR: u32,
    pub SDMMC_FIFOR0: u32,
    pub SDMMC_FIFOR1: u32,
    pub SDMMC_FIFOR2: u32,
    pub SDMMC_FIFOR3: u32,
    pub SDMMC_FIFOR4: u32,
    pub SDMMC_FIFOR5: u32,
    pub SDMMC_FIFOR6: u32,
    pub SDMMC_FIFOR7: u32,
    pub SDMMC_FIFOR8: u32,
    pub SDMMC_FIFOR9: u32,
    pub SDMMC_FIFOR10: u32,
    pub SDMMC_FIFOR11: u32,
    pub SDMMC_FIFOR12: u32,
    pub SDMMC_FIFOR13: u32,
    pub SDMMC_FIFOR14: u32,
    pub SDMMC_FIFOR15: u32,
    pub SDMMC_VERR: u32,
    pub SDMMC_IPIDR: u32,
    pub SDMMC_SIDR: u32,
}
#[cfg(not(feature = "nosync"))]
pub struct Instance {
    pub(crate) addr: u32,
    pub(crate) _marker: PhantomData<*const RegisterBlock>,
}
#[cfg(not(feature = "nosync"))]
impl ::core::ops::Deref for Instance {
    type Target = RegisterBlock;
    #[inline(always)]
    fn deref(&self) -> &RegisterBlock {
        unsafe { &*(self.addr as *const _) }
    }
}
#[cfg(feature = "rtic")]
unsafe impl Send for Instance {}