stm32h7 0.16.0

Device support crates for STM32H7 devices
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59

///Register `MACRXFCR` reader
pub type R = crate::R<MACRXFCRrs>;
///Register `MACRXFCR` writer
pub type W = crate::W<MACRXFCRrs>;
///Field `RFE` reader - Receive Flow Control Enable When this bit is set and the MAC is operating in Full-duplex mode, the MAC decodes the received Pause packet and disables its transmitter for a specified (Pause) time. When this bit is reset or the MAC is operating in Half-duplex mode, the decode function of the Pause packet is disabled. When PFC is enabled, flow control is enabled for PFC packets. The MAC decodes the received PFC packet and disables the Transmit queue, with matching priorities, for a duration of received Pause time.
pub type RFE_R = crate::BitReader;
///Field `RFE` writer - Receive Flow Control Enable When this bit is set and the MAC is operating in Full-duplex mode, the MAC decodes the received Pause packet and disables its transmitter for a specified (Pause) time. When this bit is reset or the MAC is operating in Half-duplex mode, the decode function of the Pause packet is disabled. When PFC is enabled, flow control is enabled for PFC packets. The MAC decodes the received PFC packet and disables the Transmit queue, with matching priorities, for a duration of received Pause time.
pub type RFE_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `UP` reader - Unicast Pause Packet Detect A pause packet is processed when it has the unique multicast address specified in the IEEE 802.3. When this bit is set, the MAC can also detect Pause packets with unicast address of the station. This unicast address should be as specified in MAC Address 0 high register (ETH_MACA0HR) and MAC Address 0 low register MAC Address x low register (ETH_MACAxLR). When this bit is reset, the MAC only detects Pause packets with unique multicast address. Note: The MAC does not process a Pause packet if the multicast address is different from the unique multicast address. This is also applicable to the received PFC packet when the Priority Flow Control (PFC) is enabled. The unique multicast address (0x01_80_C2_00_00_01) is as specified in IEEE 802.1 Qbb-2011.
pub type UP_R = crate::BitReader;
///Field `UP` writer - Unicast Pause Packet Detect A pause packet is processed when it has the unique multicast address specified in the IEEE 802.3. When this bit is set, the MAC can also detect Pause packets with unicast address of the station. This unicast address should be as specified in MAC Address 0 high register (ETH_MACA0HR) and MAC Address 0 low register MAC Address x low register (ETH_MACAxLR). When this bit is reset, the MAC only detects Pause packets with unique multicast address. Note: The MAC does not process a Pause packet if the multicast address is different from the unique multicast address. This is also applicable to the received PFC packet when the Priority Flow Control (PFC) is enabled. The unique multicast address (0x01_80_C2_00_00_01) is as specified in IEEE 802.1 Qbb-2011.
pub type UP_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
    ///Bit 0 - Receive Flow Control Enable When this bit is set and the MAC is operating in Full-duplex mode, the MAC decodes the received Pause packet and disables its transmitter for a specified (Pause) time. When this bit is reset or the MAC is operating in Half-duplex mode, the decode function of the Pause packet is disabled. When PFC is enabled, flow control is enabled for PFC packets. The MAC decodes the received PFC packet and disables the Transmit queue, with matching priorities, for a duration of received Pause time.
    #[inline(always)]
    pub fn rfe(&self) -> RFE_R {
        RFE_R::new((self.bits & 1) != 0)
    }
    ///Bit 1 - Unicast Pause Packet Detect A pause packet is processed when it has the unique multicast address specified in the IEEE 802.3. When this bit is set, the MAC can also detect Pause packets with unicast address of the station. This unicast address should be as specified in MAC Address 0 high register (ETH_MACA0HR) and MAC Address 0 low register MAC Address x low register (ETH_MACAxLR). When this bit is reset, the MAC only detects Pause packets with unique multicast address. Note: The MAC does not process a Pause packet if the multicast address is different from the unique multicast address. This is also applicable to the received PFC packet when the Priority Flow Control (PFC) is enabled. The unique multicast address (0x01_80_C2_00_00_01) is as specified in IEEE 802.1 Qbb-2011.
    #[inline(always)]
    pub fn up(&self) -> UP_R {
        UP_R::new(((self.bits >> 1) & 1) != 0)
    }
}
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("MACRXFCR")
            .field("rfe", &self.rfe())
            .field("up", &self.up())
            .finish()
    }
}
impl W {
    ///Bit 0 - Receive Flow Control Enable When this bit is set and the MAC is operating in Full-duplex mode, the MAC decodes the received Pause packet and disables its transmitter for a specified (Pause) time. When this bit is reset or the MAC is operating in Half-duplex mode, the decode function of the Pause packet is disabled. When PFC is enabled, flow control is enabled for PFC packets. The MAC decodes the received PFC packet and disables the Transmit queue, with matching priorities, for a duration of received Pause time.
    #[inline(always)]
    pub fn rfe(&mut self) -> RFE_W<MACRXFCRrs> {
        RFE_W::new(self, 0)
    }
    ///Bit 1 - Unicast Pause Packet Detect A pause packet is processed when it has the unique multicast address specified in the IEEE 802.3. When this bit is set, the MAC can also detect Pause packets with unicast address of the station. This unicast address should be as specified in MAC Address 0 high register (ETH_MACA0HR) and MAC Address 0 low register MAC Address x low register (ETH_MACAxLR). When this bit is reset, the MAC only detects Pause packets with unique multicast address. Note: The MAC does not process a Pause packet if the multicast address is different from the unique multicast address. This is also applicable to the received PFC packet when the Priority Flow Control (PFC) is enabled. The unique multicast address (0x01_80_C2_00_00_01) is as specified in IEEE 802.1 Qbb-2011.
    #[inline(always)]
    pub fn up(&mut self) -> UP_W<MACRXFCRrs> {
        UP_W::new(self, 1)
    }
}
/**Rx flow control register

You can [`read`](crate::Reg::read) this register and get [`macrxfcr::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`macrxfcr::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).*/
pub struct MACRXFCRrs;
impl crate::RegisterSpec for MACRXFCRrs {
    type Ux = u32;
}
///`read()` method returns [`macrxfcr::R`](R) reader structure
impl crate::Readable for MACRXFCRrs {}
///`write(|w| ..)` method takes [`macrxfcr::W`](W) writer structure
impl crate::Writable for MACRXFCRrs {
    type Safety = crate::Unsafe;
}
///`reset()` method sets MACRXFCR to value 0
impl crate::Resettable for MACRXFCRrs {}