1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
///Register `MACPOCR` reader
pub type R = crate::R<MACPOCRrs>;
///Register `MACPOCR` writer
pub type W = crate::W<MACPOCRrs>;
///Field `PTOEN` reader - PTP Offload Enable When this bit is set, the PTP Offload feature is enabled.
pub type PTOEN_R = crate::BitReader;
///Field `PTOEN` writer - PTP Offload Enable When this bit is set, the PTP Offload feature is enabled.
pub type PTOEN_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `ASYNCEN` reader - Automatic PTP SYNC message Enable When this bit is set, PTP SYNC message is generated periodically based on interval programmed or trigger from application, when the MAC is programmed to be in Clock Master mode.
pub type ASYNCEN_R = crate::BitReader;
///Field `ASYNCEN` writer - Automatic PTP SYNC message Enable When this bit is set, PTP SYNC message is generated periodically based on interval programmed or trigger from application, when the MAC is programmed to be in Clock Master mode.
pub type ASYNCEN_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `APDREQEN` reader - Automatic PTP Pdelay_Req message Enable When this bit is set, PTP Pdelay_Req message is generated periodically based on interval programmed or trigger from application, when the MAC is programmed to be in Peer-to-Peer Transparent mode.
pub type APDREQEN_R = crate::BitReader;
///Field `APDREQEN` writer - Automatic PTP Pdelay_Req message Enable When this bit is set, PTP Pdelay_Req message is generated periodically based on interval programmed or trigger from application, when the MAC is programmed to be in Peer-to-Peer Transparent mode.
pub type APDREQEN_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `ASYNCTRIG` reader - Automatic PTP SYNC message Trigger When this bit is set, one PTP SYNC message is transmitted. This bit is automatically cleared after the PTP SYNC message is transmitted. The application should set the ASYNCEN bit for this operation.
pub type ASYNCTRIG_R = crate::BitReader;
///Field `ASYNCTRIG` writer - Automatic PTP SYNC message Trigger When this bit is set, one PTP SYNC message is transmitted. This bit is automatically cleared after the PTP SYNC message is transmitted. The application should set the ASYNCEN bit for this operation.
pub type ASYNCTRIG_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `APDREQTRIG` reader - Automatic PTP Pdelay_Req message Trigger When this bit is set, one PTP Pdelay_Req message is transmitted. This bit is automatically cleared after the PTP Pdelay_Req message is transmitted. The application should set the APDREQEN bit for this operation.
pub type APDREQTRIG_R = crate::BitReader;
///Field `APDREQTRIG` writer - Automatic PTP Pdelay_Req message Trigger When this bit is set, one PTP Pdelay_Req message is transmitted. This bit is automatically cleared after the PTP Pdelay_Req message is transmitted. The application should set the APDREQEN bit for this operation.
pub type APDREQTRIG_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `DRRDIS` reader - Disable PTO Delay Request/Response response generation When this bit is set, the Delay Request and Delay response are not generated for received SYNC and Delay request packet respectively, as required by the programmed mode.
pub type DRRDIS_R = crate::BitReader;
///Field `DRRDIS` writer - Disable PTO Delay Request/Response response generation When this bit is set, the Delay Request and Delay response are not generated for received SYNC and Delay request packet respectively, as required by the programmed mode.
pub type DRRDIS_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `DN` reader - Domain Number This field indicates the domain Number in which the PTP node is operating.
pub type DN_R = crate::FieldReader;
///Field `DN` writer - Domain Number This field indicates the domain Number in which the PTP node is operating.
pub type DN_W<'a, REG> = crate::FieldWriter<'a, REG, 8>;
impl R {
///Bit 0 - PTP Offload Enable When this bit is set, the PTP Offload feature is enabled.
#[inline(always)]
pub fn ptoen(&self) -> PTOEN_R {
PTOEN_R::new((self.bits & 1) != 0)
}
///Bit 1 - Automatic PTP SYNC message Enable When this bit is set, PTP SYNC message is generated periodically based on interval programmed or trigger from application, when the MAC is programmed to be in Clock Master mode.
#[inline(always)]
pub fn asyncen(&self) -> ASYNCEN_R {
ASYNCEN_R::new(((self.bits >> 1) & 1) != 0)
}
///Bit 2 - Automatic PTP Pdelay_Req message Enable When this bit is set, PTP Pdelay_Req message is generated periodically based on interval programmed or trigger from application, when the MAC is programmed to be in Peer-to-Peer Transparent mode.
#[inline(always)]
pub fn apdreqen(&self) -> APDREQEN_R {
APDREQEN_R::new(((self.bits >> 2) & 1) != 0)
}
///Bit 4 - Automatic PTP SYNC message Trigger When this bit is set, one PTP SYNC message is transmitted. This bit is automatically cleared after the PTP SYNC message is transmitted. The application should set the ASYNCEN bit for this operation.
#[inline(always)]
pub fn asynctrig(&self) -> ASYNCTRIG_R {
ASYNCTRIG_R::new(((self.bits >> 4) & 1) != 0)
}
///Bit 5 - Automatic PTP Pdelay_Req message Trigger When this bit is set, one PTP Pdelay_Req message is transmitted. This bit is automatically cleared after the PTP Pdelay_Req message is transmitted. The application should set the APDREQEN bit for this operation.
#[inline(always)]
pub fn apdreqtrig(&self) -> APDREQTRIG_R {
APDREQTRIG_R::new(((self.bits >> 5) & 1) != 0)
}
///Bit 6 - Disable PTO Delay Request/Response response generation When this bit is set, the Delay Request and Delay response are not generated for received SYNC and Delay request packet respectively, as required by the programmed mode.
#[inline(always)]
pub fn drrdis(&self) -> DRRDIS_R {
DRRDIS_R::new(((self.bits >> 6) & 1) != 0)
}
///Bits 8:15 - Domain Number This field indicates the domain Number in which the PTP node is operating.
#[inline(always)]
pub fn dn(&self) -> DN_R {
DN_R::new(((self.bits >> 8) & 0xff) as u8)
}
}
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
f.debug_struct("MACPOCR")
.field("ptoen", &self.ptoen())
.field("asyncen", &self.asyncen())
.field("apdreqen", &self.apdreqen())
.field("asynctrig", &self.asynctrig())
.field("apdreqtrig", &self.apdreqtrig())
.field("drrdis", &self.drrdis())
.field("dn", &self.dn())
.finish()
}
}
impl W {
///Bit 0 - PTP Offload Enable When this bit is set, the PTP Offload feature is enabled.
#[inline(always)]
pub fn ptoen(&mut self) -> PTOEN_W<MACPOCRrs> {
PTOEN_W::new(self, 0)
}
///Bit 1 - Automatic PTP SYNC message Enable When this bit is set, PTP SYNC message is generated periodically based on interval programmed or trigger from application, when the MAC is programmed to be in Clock Master mode.
#[inline(always)]
pub fn asyncen(&mut self) -> ASYNCEN_W<MACPOCRrs> {
ASYNCEN_W::new(self, 1)
}
///Bit 2 - Automatic PTP Pdelay_Req message Enable When this bit is set, PTP Pdelay_Req message is generated periodically based on interval programmed or trigger from application, when the MAC is programmed to be in Peer-to-Peer Transparent mode.
#[inline(always)]
pub fn apdreqen(&mut self) -> APDREQEN_W<MACPOCRrs> {
APDREQEN_W::new(self, 2)
}
///Bit 4 - Automatic PTP SYNC message Trigger When this bit is set, one PTP SYNC message is transmitted. This bit is automatically cleared after the PTP SYNC message is transmitted. The application should set the ASYNCEN bit for this operation.
#[inline(always)]
pub fn asynctrig(&mut self) -> ASYNCTRIG_W<MACPOCRrs> {
ASYNCTRIG_W::new(self, 4)
}
///Bit 5 - Automatic PTP Pdelay_Req message Trigger When this bit is set, one PTP Pdelay_Req message is transmitted. This bit is automatically cleared after the PTP Pdelay_Req message is transmitted. The application should set the APDREQEN bit for this operation.
#[inline(always)]
pub fn apdreqtrig(&mut self) -> APDREQTRIG_W<MACPOCRrs> {
APDREQTRIG_W::new(self, 5)
}
///Bit 6 - Disable PTO Delay Request/Response response generation When this bit is set, the Delay Request and Delay response are not generated for received SYNC and Delay request packet respectively, as required by the programmed mode.
#[inline(always)]
pub fn drrdis(&mut self) -> DRRDIS_W<MACPOCRrs> {
DRRDIS_W::new(self, 6)
}
///Bits 8:15 - Domain Number This field indicates the domain Number in which the PTP node is operating.
#[inline(always)]
pub fn dn(&mut self) -> DN_W<MACPOCRrs> {
DN_W::new(self, 8)
}
}
/**PTP Offload control register
You can [`read`](crate::Reg::read) this register and get [`macpocr::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`macpocr::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).*/
pub struct MACPOCRrs;
impl crate::RegisterSpec for MACPOCRrs {
type Ux = u32;
}
///`read()` method returns [`macpocr::R`](R) reader structure
impl crate::Readable for MACPOCRrs {}
///`write(|w| ..)` method takes [`macpocr::W`](W) writer structure
impl crate::Writable for MACPOCRrs {
type Safety = crate::Unsafe;
}
///`reset()` method sets MACPOCR to value 0
impl crate::Resettable for MACPOCRrs {}