rustyfit 0.8.1

// Code generated by fitgen/main.go. DO NOT EDIT.

// Copyright 2025 The RustyFIT Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

#![allow(unused, clippy::manual_range_patterns)]

use crate::profile::{ProfileType, typedef};
use crate::proto::*;
use alloc::borrow::ToOwned;
use alloc::string::String;
use alloc::vec::Vec;

#[derive(Debug, Clone)]
/// BikeProfile is a BikeProfile message.
pub struct BikeProfile {
    pub message_index: typedef::MessageIndex,
    pub name: String,
    pub sport: typedef::Sport,
    pub sub_sport: typedef::SubSport,
    /// Scale: 100; Units: m
    pub odometer: u32,
    /// Base: UINT16Z
    pub bike_spd_ant_id: u16,
    /// Base: UINT16Z
    pub bike_cad_ant_id: u16,
    /// Base: UINT16Z
    pub bike_spdcad_ant_id: u16,
    /// Base: UINT16Z
    pub bike_power_ant_id: u16,
    /// Scale: 1000; Units: m
    pub custom_wheelsize: u16,
    /// Scale: 1000; Units: m
    pub auto_wheelsize: u16,
    /// Scale: 10; Units: kg
    pub bike_weight: u16,
    /// Scale: 10; Units: %
    pub power_cal_factor: u16,
    pub auto_wheel_cal: typedef::Bool,
    pub auto_power_zero: typedef::Bool,
    pub id: u8,
    pub spd_enabled: typedef::Bool,
    pub cad_enabled: typedef::Bool,
    pub spdcad_enabled: typedef::Bool,
    pub power_enabled: typedef::Bool,
    /// Scale: 2; Offset: -110; Units: mm
    pub crank_length: u8,
    pub enabled: typedef::Bool,
    /// Base: UINT8Z
    pub bike_spd_ant_id_trans_type: u8,
    /// Base: UINT8Z
    pub bike_cad_ant_id_trans_type: u8,
    /// Base: UINT8Z
    pub bike_spdcad_ant_id_trans_type: u8,
    /// Base: UINT8Z
    pub bike_power_ant_id_trans_type: u8,
    /// Rollover counter that can be used to extend the odometer
    pub odometer_rollover: u8,
    /// Base: UINT8Z; Number of front gears
    pub front_gear_num: u8,
    /// Base: UINT8Z; Number of teeth on each gear 0 is innermost
    pub front_gear: Vec<u8>,
    /// Base: UINT8Z; Number of rear gears
    pub rear_gear_num: u8,
    /// Base: UINT8Z; Number of teeth on each gear 0 is innermost
    pub rear_gear: Vec<u8>,
    pub shimano_di2_enabled: typedef::Bool,
    /// unknown_fields are fields that are exist but they are not defined in Profile.xlsx
    pub unknown_fields: Vec<Field>,
    /// developer_fields are custom data fields (Added since protocol version 2.0)
    pub developer_fields: Vec<DeveloperField>,
}

impl BikeProfile {
    /// Value's type: `u16`
    pub const MESSAGE_INDEX: u8 = 254;
    /// Value's type: `String`
    pub const NAME: u8 = 0;
    /// Value's type: `u8`
    pub const SPORT: u8 = 1;
    /// Value's type: `u8`
    pub const SUB_SPORT: u8 = 2;
    /// Value's type: `u32`; Scale: `100`; Units: `m`
    pub const ODOMETER: u8 = 3;
    /// Value's type: `u16`; Base: UINT16Z
    pub const BIKE_SPD_ANT_ID: u8 = 4;
    /// Value's type: `u16`; Base: UINT16Z
    pub const BIKE_CAD_ANT_ID: u8 = 5;
    /// Value's type: `u16`; Base: UINT16Z
    pub const BIKE_SPDCAD_ANT_ID: u8 = 6;
    /// Value's type: `u16`; Base: UINT16Z
    pub const BIKE_POWER_ANT_ID: u8 = 7;
    /// Value's type: `u16`; Scale: `1000`; Units: `m`
    pub const CUSTOM_WHEELSIZE: u8 = 8;
    /// Value's type: `u16`; Scale: `1000`; Units: `m`
    pub const AUTO_WHEELSIZE: u8 = 9;
    /// Value's type: `u16`; Scale: `10`; Units: `kg`
    pub const BIKE_WEIGHT: u8 = 10;
    /// Value's type: `u16`; Scale: `10`; Units: `%`
    pub const POWER_CAL_FACTOR: u8 = 11;
    /// Value's type: `u8`
    pub const AUTO_WHEEL_CAL: u8 = 12;
    /// Value's type: `u8`
    pub const AUTO_POWER_ZERO: u8 = 13;
    /// Value's type: `u8`
    pub const ID: u8 = 14;
    /// Value's type: `u8`
    pub const SPD_ENABLED: u8 = 15;
    /// Value's type: `u8`
    pub const CAD_ENABLED: u8 = 16;
    /// Value's type: `u8`
    pub const SPDCAD_ENABLED: u8 = 17;
    /// Value's type: `u8`
    pub const POWER_ENABLED: u8 = 18;
    /// Value's type: `u8`; Scale: `2`; Offset: `-110`; Units: `mm`
    pub const CRANK_LENGTH: u8 = 19;
    /// Value's type: `u8`
    pub const ENABLED: u8 = 20;
    /// Value's type: `u8`; Base: UINT8Z
    pub const BIKE_SPD_ANT_ID_TRANS_TYPE: u8 = 21;
    /// Value's type: `u8`; Base: UINT8Z
    pub const BIKE_CAD_ANT_ID_TRANS_TYPE: u8 = 22;
    /// Value's type: `u8`; Base: UINT8Z
    pub const BIKE_SPDCAD_ANT_ID_TRANS_TYPE: u8 = 23;
    /// Value's type: `u8`; Base: UINT8Z
    pub const BIKE_POWER_ANT_ID_TRANS_TYPE: u8 = 24;
    /// Value's type: `u8`
    pub const ODOMETER_ROLLOVER: u8 = 37;
    /// Value's type: `u8`; Base: UINT8Z
    pub const FRONT_GEAR_NUM: u8 = 38;
    /// Value's type: `Vec<u8>`; Base: UINT8Z
    pub const FRONT_GEAR: u8 = 39;
    /// Value's type: `u8`; Base: UINT8Z
    pub const REAR_GEAR_NUM: u8 = 40;
    /// Value's type: `Vec<u8>`; Base: UINT8Z
    pub const REAR_GEAR: u8 = 41;
    /// Value's type: `u8`
    pub const SHIMANO_DI2_ENABLED: u8 = 44;

    /// Create new BikeProfile with all fields being set to its corresponding invalid value.
    pub const fn new() -> Self {
        Self {
            message_index: typedef::MessageIndex(u16::MAX),
            name: String::new(),
            sport: typedef::Sport(u8::MAX),
            sub_sport: typedef::SubSport(u8::MAX),
            odometer: u32::MAX,
            bike_spd_ant_id: u16::MIN,
            bike_cad_ant_id: u16::MIN,
            bike_spdcad_ant_id: u16::MIN,
            bike_power_ant_id: u16::MIN,
            custom_wheelsize: u16::MAX,
            auto_wheelsize: u16::MAX,
            bike_weight: u16::MAX,
            power_cal_factor: u16::MAX,
            auto_wheel_cal: typedef::Bool(u8::MAX),
            auto_power_zero: typedef::Bool(u8::MAX),
            id: u8::MAX,
            spd_enabled: typedef::Bool(u8::MAX),
            cad_enabled: typedef::Bool(u8::MAX),
            spdcad_enabled: typedef::Bool(u8::MAX),
            power_enabled: typedef::Bool(u8::MAX),
            crank_length: u8::MAX,
            enabled: typedef::Bool(u8::MAX),
            bike_spd_ant_id_trans_type: u8::MIN,
            bike_cad_ant_id_trans_type: u8::MIN,
            bike_spdcad_ant_id_trans_type: u8::MIN,
            bike_power_ant_id_trans_type: u8::MIN,
            odometer_rollover: u8::MAX,
            front_gear_num: u8::MIN,
            front_gear: Vec::new(),
            rear_gear_num: u8::MIN,
            rear_gear: Vec::new(),
            shimano_di2_enabled: typedef::Bool(u8::MAX),
            unknown_fields: Vec::new(),
            developer_fields: Vec::new(),
        }
    }

    /// Returns `odometer` in its scaled value. It returns invalid f64 when value is valid.
    pub fn odometer_scaled(&self) -> f64 {
        if self.odometer == u32::MAX {
            return f64::from_bits(u64::MAX);
        }
        self.odometer as f64 / 100.0 - 0.0
    }

    /// Set `odometer` with scaled value, it will automatically be converted to its corresponding integer value.
    pub fn set_odometer_scaled(&mut self, v: f64) -> &mut BikeProfile {
        let unscaled = (v + 0.0) * 100.0;
        if unscaled.is_nan() || unscaled.is_infinite() || unscaled > u32::MAX as f64 {
            self.odometer = u32::MAX;
            return self;
        }
        self.odometer = unscaled as u32;
        self
    }

    /// Returns `custom_wheelsize` in its scaled value. It returns invalid f64 when value is valid.
    pub fn custom_wheelsize_scaled(&self) -> f64 {
        if self.custom_wheelsize == u16::MAX {
            return f64::from_bits(u64::MAX);
        }
        self.custom_wheelsize as f64 / 1000.0 - 0.0
    }

    /// Set `custom_wheelsize` with scaled value, it will automatically be converted to its corresponding integer value.
    pub fn set_custom_wheelsize_scaled(&mut self, v: f64) -> &mut BikeProfile {
        let unscaled = (v + 0.0) * 1000.0;
        if unscaled.is_nan() || unscaled.is_infinite() || unscaled > u16::MAX as f64 {
            self.custom_wheelsize = u16::MAX;
            return self;
        }
        self.custom_wheelsize = unscaled as u16;
        self
    }

    /// Returns `auto_wheelsize` in its scaled value. It returns invalid f64 when value is valid.
    pub fn auto_wheelsize_scaled(&self) -> f64 {
        if self.auto_wheelsize == u16::MAX {
            return f64::from_bits(u64::MAX);
        }
        self.auto_wheelsize as f64 / 1000.0 - 0.0
    }

    /// Set `auto_wheelsize` with scaled value, it will automatically be converted to its corresponding integer value.
    pub fn set_auto_wheelsize_scaled(&mut self, v: f64) -> &mut BikeProfile {
        let unscaled = (v + 0.0) * 1000.0;
        if unscaled.is_nan() || unscaled.is_infinite() || unscaled > u16::MAX as f64 {
            self.auto_wheelsize = u16::MAX;
            return self;
        }
        self.auto_wheelsize = unscaled as u16;
        self
    }

    /// Returns `bike_weight` in its scaled value. It returns invalid f64 when value is valid.
    pub fn bike_weight_scaled(&self) -> f64 {
        if self.bike_weight == u16::MAX {
            return f64::from_bits(u64::MAX);
        }
        self.bike_weight as f64 / 10.0 - 0.0
    }

    /// Set `bike_weight` with scaled value, it will automatically be converted to its corresponding integer value.
    pub fn set_bike_weight_scaled(&mut self, v: f64) -> &mut BikeProfile {
        let unscaled = (v + 0.0) * 10.0;
        if unscaled.is_nan() || unscaled.is_infinite() || unscaled > u16::MAX as f64 {
            self.bike_weight = u16::MAX;
            return self;
        }
        self.bike_weight = unscaled as u16;
        self
    }

    /// Returns `power_cal_factor` in its scaled value. It returns invalid f64 when value is valid.
    pub fn power_cal_factor_scaled(&self) -> f64 {
        if self.power_cal_factor == u16::MAX {
            return f64::from_bits(u64::MAX);
        }
        self.power_cal_factor as f64 / 10.0 - 0.0
    }

    /// Set `power_cal_factor` with scaled value, it will automatically be converted to its corresponding integer value.
    pub fn set_power_cal_factor_scaled(&mut self, v: f64) -> &mut BikeProfile {
        let unscaled = (v + 0.0) * 10.0;
        if unscaled.is_nan() || unscaled.is_infinite() || unscaled > u16::MAX as f64 {
            self.power_cal_factor = u16::MAX;
            return self;
        }
        self.power_cal_factor = unscaled as u16;
        self
    }

    /// Returns `crank_length` in its scaled value. It returns invalid f64 when value is valid.
    pub fn crank_length_scaled(&self) -> f64 {
        if self.crank_length == u8::MAX {
            return f64::from_bits(u64::MAX);
        }
        self.crank_length as f64 / 2.0 - -110.0
    }

    /// Set `crank_length` with scaled value, it will automatically be converted to its corresponding integer value.
    pub fn set_crank_length_scaled(&mut self, v: f64) -> &mut BikeProfile {
        let unscaled = (v + -110.0) * 2.0;
        if unscaled.is_nan() || unscaled.is_infinite() || unscaled > u8::MAX as f64 {
            self.crank_length = u8::MAX;
            return self;
        }
        self.crank_length = unscaled as u8;
        self
    }

    fn count_valid_fields(&self) -> usize {
        (self.message_index != typedef::MessageIndex(u16::MAX)) as usize
            + (!self.name.is_empty()) as usize
            + (self.sport != typedef::Sport(u8::MAX)) as usize
            + (self.sub_sport != typedef::SubSport(u8::MAX)) as usize
            + (self.odometer != u32::MAX) as usize
            + (self.bike_spd_ant_id != u16::MIN) as usize
            + (self.bike_cad_ant_id != u16::MIN) as usize
            + (self.bike_spdcad_ant_id != u16::MIN) as usize
            + (self.bike_power_ant_id != u16::MIN) as usize
            + (self.custom_wheelsize != u16::MAX) as usize
            + (self.auto_wheelsize != u16::MAX) as usize
            + (self.bike_weight != u16::MAX) as usize
            + (self.power_cal_factor != u16::MAX) as usize
            + (self.auto_wheel_cal != typedef::Bool(u8::MAX)) as usize
            + (self.auto_power_zero != typedef::Bool(u8::MAX)) as usize
            + (self.id != u8::MAX) as usize
            + (self.spd_enabled != typedef::Bool(u8::MAX)) as usize
            + (self.cad_enabled != typedef::Bool(u8::MAX)) as usize
            + (self.spdcad_enabled != typedef::Bool(u8::MAX)) as usize
            + (self.power_enabled != typedef::Bool(u8::MAX)) as usize
            + (self.crank_length != u8::MAX) as usize
            + (self.enabled != typedef::Bool(u8::MAX)) as usize
            + (self.bike_spd_ant_id_trans_type != u8::MIN) as usize
            + (self.bike_cad_ant_id_trans_type != u8::MIN) as usize
            + (self.bike_spdcad_ant_id_trans_type != u8::MIN) as usize
            + (self.bike_power_ant_id_trans_type != u8::MIN) as usize
            + (self.odometer_rollover != u8::MAX) as usize
            + (self.front_gear_num != u8::MIN) as usize
            + (!self.front_gear.is_empty()) as usize
            + (self.rear_gear_num != u8::MIN) as usize
            + (!self.rear_gear.is_empty()) as usize
            + (self.shimano_di2_enabled != typedef::Bool(u8::MAX)) as usize
    }
}

impl Default for BikeProfile {
    fn default() -> Self {
        Self::new()
    }
}

impl From<&Message> for BikeProfile {
    /// from creates new BikeProfile struct based on given mesg.
    fn from(mesg: &Message) -> Self {
        const KNOWN_NUMS: [u64; 4] = [21852827156479, 0, 0, 4611686018427387904];
        let mut n = 0u64;
        for field in &mesg.fields {
            n += (KNOWN_NUMS[field.num as usize >> 6] >> (field.num & 63)) & 1 ^ 1
        }

        let mut v = Self::new();
        v.unknown_fields = Vec::<Field>::with_capacity(n as usize);
        v.developer_fields = mesg.developer_fields.clone();

        for field in &mesg.fields {
            match field.num {
                254 => v.message_index = typedef::MessageIndex(field.value.as_u16()),
                0 => v.name = field.value.as_str().to_owned(),
                1 => v.sport = typedef::Sport(field.value.as_u8()),
                2 => v.sub_sport = typedef::SubSport(field.value.as_u8()),
                3 => v.odometer = field.value.as_u32(),
                4 => v.bike_spd_ant_id = field.value.as_u16z(),
                5 => v.bike_cad_ant_id = field.value.as_u16z(),
                6 => v.bike_spdcad_ant_id = field.value.as_u16z(),
                7 => v.bike_power_ant_id = field.value.as_u16z(),
                8 => v.custom_wheelsize = field.value.as_u16(),
                9 => v.auto_wheelsize = field.value.as_u16(),
                10 => v.bike_weight = field.value.as_u16(),
                11 => v.power_cal_factor = field.value.as_u16(),
                12 => v.auto_wheel_cal = typedef::Bool(field.value.as_u8()),
                13 => v.auto_power_zero = typedef::Bool(field.value.as_u8()),
                14 => v.id = field.value.as_u8(),
                15 => v.spd_enabled = typedef::Bool(field.value.as_u8()),
                16 => v.cad_enabled = typedef::Bool(field.value.as_u8()),
                17 => v.spdcad_enabled = typedef::Bool(field.value.as_u8()),
                18 => v.power_enabled = typedef::Bool(field.value.as_u8()),
                19 => v.crank_length = field.value.as_u8(),
                20 => v.enabled = typedef::Bool(field.value.as_u8()),
                21 => v.bike_spd_ant_id_trans_type = field.value.as_u8z(),
                22 => v.bike_cad_ant_id_trans_type = field.value.as_u8z(),
                23 => v.bike_spdcad_ant_id_trans_type = field.value.as_u8z(),
                24 => v.bike_power_ant_id_trans_type = field.value.as_u8z(),
                37 => v.odometer_rollover = field.value.as_u8(),
                38 => v.front_gear_num = field.value.as_u8z(),
                39 => v.front_gear = field.value.to_vec_u8(),
                40 => v.rear_gear_num = field.value.as_u8z(),
                41 => v.rear_gear = field.value.to_vec_u8(),
                44 => v.shimano_di2_enabled = typedef::Bool(field.value.as_u8()),
                _ => v.unknown_fields.push(field.clone()),
            };
        }

        v
    }
}

impl From<BikeProfile> for Message {
    fn from(m: BikeProfile) -> Self {
        let mut fields =
            Vec::<Field>::with_capacity(m.count_valid_fields() + m.unknown_fields.len());

        if m.message_index != typedef::MessageIndex(u16::MAX) {
            fields.push(Field {
                num: 254,
                profile_type: ProfileType::MESSAGE_INDEX,
                value: Value::Uint16(m.message_index.0),
                is_expanded: false,
            });
        };
        if !m.name.is_empty() {
            fields.push(Field {
                num: 0,
                profile_type: ProfileType::STRING,
                value: Value::String(m.name),
                is_expanded: false,
            });
        };
        if m.sport != typedef::Sport(u8::MAX) {
            fields.push(Field {
                num: 1,
                profile_type: ProfileType::SPORT,
                value: Value::Uint8(m.sport.0),
                is_expanded: false,
            });
        };
        if m.sub_sport != typedef::SubSport(u8::MAX) {
            fields.push(Field {
                num: 2,
                profile_type: ProfileType::SUB_SPORT,
                value: Value::Uint8(m.sub_sport.0),
                is_expanded: false,
            });
        };
        if m.odometer != u32::MAX {
            fields.push(Field {
                num: 3,
                profile_type: ProfileType::UINT32,
                value: Value::Uint32(m.odometer),
                is_expanded: false,
            });
        };
        if m.bike_spd_ant_id != u16::MIN {
            fields.push(Field {
                num: 4,
                profile_type: ProfileType::UINT16Z,
                value: Value::Uint16(m.bike_spd_ant_id),
                is_expanded: false,
            });
        };
        if m.bike_cad_ant_id != u16::MIN {
            fields.push(Field {
                num: 5,
                profile_type: ProfileType::UINT16Z,
                value: Value::Uint16(m.bike_cad_ant_id),
                is_expanded: false,
            });
        };
        if m.bike_spdcad_ant_id != u16::MIN {
            fields.push(Field {
                num: 6,
                profile_type: ProfileType::UINT16Z,
                value: Value::Uint16(m.bike_spdcad_ant_id),
                is_expanded: false,
            });
        };
        if m.bike_power_ant_id != u16::MIN {
            fields.push(Field {
                num: 7,
                profile_type: ProfileType::UINT16Z,
                value: Value::Uint16(m.bike_power_ant_id),
                is_expanded: false,
            });
        };
        if m.custom_wheelsize != u16::MAX {
            fields.push(Field {
                num: 8,
                profile_type: ProfileType::UINT16,
                value: Value::Uint16(m.custom_wheelsize),
                is_expanded: false,
            });
        };
        if m.auto_wheelsize != u16::MAX {
            fields.push(Field {
                num: 9,
                profile_type: ProfileType::UINT16,
                value: Value::Uint16(m.auto_wheelsize),
                is_expanded: false,
            });
        };
        if m.bike_weight != u16::MAX {
            fields.push(Field {
                num: 10,
                profile_type: ProfileType::UINT16,
                value: Value::Uint16(m.bike_weight),
                is_expanded: false,
            });
        };
        if m.power_cal_factor != u16::MAX {
            fields.push(Field {
                num: 11,
                profile_type: ProfileType::UINT16,
                value: Value::Uint16(m.power_cal_factor),
                is_expanded: false,
            });
        };
        if m.auto_wheel_cal != typedef::Bool(u8::MAX) {
            fields.push(Field {
                num: 12,
                profile_type: ProfileType::BOOL,
                value: Value::Uint8(m.auto_wheel_cal.0),
                is_expanded: false,
            });
        };
        if m.auto_power_zero != typedef::Bool(u8::MAX) {
            fields.push(Field {
                num: 13,
                profile_type: ProfileType::BOOL,
                value: Value::Uint8(m.auto_power_zero.0),
                is_expanded: false,
            });
        };
        if m.id != u8::MAX {
            fields.push(Field {
                num: 14,
                profile_type: ProfileType::UINT8,
                value: Value::Uint8(m.id),
                is_expanded: false,
            });
        };
        if m.spd_enabled != typedef::Bool(u8::MAX) {
            fields.push(Field {
                num: 15,
                profile_type: ProfileType::BOOL,
                value: Value::Uint8(m.spd_enabled.0),
                is_expanded: false,
            });
        };
        if m.cad_enabled != typedef::Bool(u8::MAX) {
            fields.push(Field {
                num: 16,
                profile_type: ProfileType::BOOL,
                value: Value::Uint8(m.cad_enabled.0),
                is_expanded: false,
            });
        };
        if m.spdcad_enabled != typedef::Bool(u8::MAX) {
            fields.push(Field {
                num: 17,
                profile_type: ProfileType::BOOL,
                value: Value::Uint8(m.spdcad_enabled.0),
                is_expanded: false,
            });
        };
        if m.power_enabled != typedef::Bool(u8::MAX) {
            fields.push(Field {
                num: 18,
                profile_type: ProfileType::BOOL,
                value: Value::Uint8(m.power_enabled.0),
                is_expanded: false,
            });
        };
        if m.crank_length != u8::MAX {
            fields.push(Field {
                num: 19,
                profile_type: ProfileType::UINT8,
                value: Value::Uint8(m.crank_length),
                is_expanded: false,
            });
        };
        if m.enabled != typedef::Bool(u8::MAX) {
            fields.push(Field {
                num: 20,
                profile_type: ProfileType::BOOL,
                value: Value::Uint8(m.enabled.0),
                is_expanded: false,
            });
        };
        if m.bike_spd_ant_id_trans_type != u8::MIN {
            fields.push(Field {
                num: 21,
                profile_type: ProfileType::UINT8Z,
                value: Value::Uint8(m.bike_spd_ant_id_trans_type),
                is_expanded: false,
            });
        };
        if m.bike_cad_ant_id_trans_type != u8::MIN {
            fields.push(Field {
                num: 22,
                profile_type: ProfileType::UINT8Z,
                value: Value::Uint8(m.bike_cad_ant_id_trans_type),
                is_expanded: false,
            });
        };
        if m.bike_spdcad_ant_id_trans_type != u8::MIN {
            fields.push(Field {
                num: 23,
                profile_type: ProfileType::UINT8Z,
                value: Value::Uint8(m.bike_spdcad_ant_id_trans_type),
                is_expanded: false,
            });
        };
        if m.bike_power_ant_id_trans_type != u8::MIN {
            fields.push(Field {
                num: 24,
                profile_type: ProfileType::UINT8Z,
                value: Value::Uint8(m.bike_power_ant_id_trans_type),
                is_expanded: false,
            });
        };
        if m.odometer_rollover != u8::MAX {
            fields.push(Field {
                num: 37,
                profile_type: ProfileType::UINT8,
                value: Value::Uint8(m.odometer_rollover),
                is_expanded: false,
            });
        };
        if m.front_gear_num != u8::MIN {
            fields.push(Field {
                num: 38,
                profile_type: ProfileType::UINT8Z,
                value: Value::Uint8(m.front_gear_num),
                is_expanded: false,
            });
        };
        if !m.front_gear.is_empty() {
            fields.push(Field {
                num: 39,
                profile_type: ProfileType::UINT8Z,
                value: Value::VecUint8(m.front_gear),
                is_expanded: false,
            });
        };
        if m.rear_gear_num != u8::MIN {
            fields.push(Field {
                num: 40,
                profile_type: ProfileType::UINT8Z,
                value: Value::Uint8(m.rear_gear_num),
                is_expanded: false,
            });
        };
        if !m.rear_gear.is_empty() {
            fields.push(Field {
                num: 41,
                profile_type: ProfileType::UINT8Z,
                value: Value::VecUint8(m.rear_gear),
                is_expanded: false,
            });
        };
        if m.shimano_di2_enabled != typedef::Bool(u8::MAX) {
            fields.push(Field {
                num: 44,
                profile_type: ProfileType::BOOL,
                value: Value::Uint8(m.shimano_di2_enabled.0),
                is_expanded: false,
            });
        };

        fields.extend_from_slice(&m.unknown_fields);

        Self {
            header: 0,
            num: typedef::MesgNum::BIKE_PROFILE,
            fields,
            developer_fields: m.developer_fields,
        }
    }
}