svd-generator 0.7.0

use crate::svd::{create_bit_range, create_field, create_register, create_register_properties};
use crate::Result;

/// Creates the Shadow FIFO Enable.
pub fn create() -> Result<svd::RegisterCluster> {
    Ok(svd::RegisterCluster::Register(
        create_register(
            "sfe",
            "Shadow FIFO Enable: This register is only valid when the DW_apb_uart is configured to have additional FIFO registers implemented (FIFO_MODE != None) and additional shadow registers implemented (SHADOW == YES). If these registers are not implemented, this register does not exist and reading from this register address returns zero.",
            0x98,
            create_register_properties(32, 0)?,
            Some(&[
                create_field(
                    "sfe",
                    "Shadow FIFO Enable. This is a shadow register for the FIFO enable bit (FCR[0]). This can be used to remove the burden of having to store the previously written value to the FCR in memory and having to mask this value so that only the FIFO enable bit gets updated.This enables/disables the transmit (XMIT) and receive (RCVR) FIFOs. If this bit is set to zero (disabled) after being enabled then both the XMIT and RCVR controller portion of FIFOs are reset.",
                    create_bit_range("[0:0]")?,
                    svd::Access::ReadWrite,
                    None,
                )?,
            ]),
            None,
        )?
    ))
}