svd-generator 0.7.0

Converts device information from flattened device tree into an SVD description
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75

use crate::svd::{
    create_bit_range, create_enum_value, create_enum_values, create_field_enum, create_register,
    create_register_properties,
};
use crate::Result;

/// Creates the Interrupt Enable Register.
pub fn create() -> Result<svd::RegisterCluster> {
    Ok(svd::RegisterCluster::Register(
        create_register(
            "ier",
            "Interrupt Enable Register",
            0x4,
            create_register_properties(32, 0)?,
            Some(&[
                create_field_enum(
                    "ptime",
                    "Programmable THRE Interrupt Mode Enable that can be written to only when THRE_MODE_USER == Enabled, always readable. This is used to enable/disable the generation of THRE Interrupt. 0 = disabled 1 = enabled",
                    create_bit_range("[7:7]")?,
                    svd::Access::ReadWrite,
                    &[create_enum_values(&[
                        create_enum_value("disable", "Programmable THRE Interrupt Mode disabled", 0b0)?,
                        create_enum_value("enable", "Programmable THRE Interrupt Mode enabled", 0b1)?,
                    ])?],
                    None,
                )?,
                create_field_enum(
                    "edssi",
                    "Enable Modem Status Interrupt. This is used to enable/disable the generation of Modem Status Interrupt. This is the fourth highest priority interrupt. 0 = disabled 1 = enabled",
                    create_bit_range("[3:3]")?,
                    svd::Access::ReadWrite,
                    &[create_enum_values(&[
                        create_enum_value("disable", "Modem Status Interrupt disabled", 0b0)?,
                        create_enum_value("enable", "Modem Status Interrupt enabled", 0b1)?,
                    ])?],
                    None,
                )?,
                create_field_enum(
                    "elsi",
                    "Enable Receiver Line Status Interrupt. This is used to enable/disable the generation of Receiver Line Status Interrupt. This is the highest priority interrupt. 0 = disabled 1 = enabled",
                    create_bit_range("[2:2]")?,
                    svd::Access::ReadWrite,
                    &[create_enum_values(&[
                        create_enum_value("disable", "Enable Receiver Line Status Interrupt disabled", 0b0)?,
                        create_enum_value("enable", "Enable Receiver Line Status Interrupt enabled", 0b1)?,
                    ])?],
                    None,
                )?,
                create_field_enum(
                    "etbei",
                    "Enable Transmit Holding Register Empty Interrupt. This is used to enable/disable the generation of Transmitter Holding Register Empty Interrupt. This is the third highest priority interrupt. 0 = disabled 1 = enabled",
                    create_bit_range("[1:1]")?,
                    svd::Access::ReadWrite,
                    &[create_enum_values(&[
                        create_enum_value("disable", "Enable Transmit Holding Register Empty Interrupt disabled", 0b0)?,
                        create_enum_value("enable", "Enable Transmit Holding Register Empty Interrupt enabled", 0b1)?,
                    ])?],
                    None,
                )?,
                create_field_enum(
                    "erbfi",
                    "Enable Received Data Available Interrupt. This is used to enable/disable the generation of Received Data Available Interrupt and the Character Timeout Interrupt (if in FIFO mode and FIFOs enabled). These are the second highest priority interrupts. 0 = disabled 1 = enabled",
                    create_bit_range("[0:0]")?,
                    svd::Access::ReadWrite,
                    &[create_enum_values(&[
                        create_enum_value("disable", "Enable Received Data Available Interrupt disabled", 0b0)?,
                        create_enum_value("enable", "Enable Received Data Available Interrupt enabled", 0b1)?,
                    ])?],
                    None
                )?,
            ]),
            None,
        )?
    ))
}