stm32g0 0.16.0

Device support crates for STM32G0 devices
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46

///Register `CALFACT` reader
pub type R = crate::R<CALFACTrs>;
///Register `CALFACT` writer
pub type W = crate::W<CALFACTrs>;
///Field `CALFACT` reader - Calibration factor These bits are written by hardware or by software. Once a calibration is complete,they are updated by hardware with the calibration factors. Software can write these bits with a new calibration factor. If the new calibration factor is different from the current one stored into the analog ADC, it is then applied once a new calibration is launched. Just after a calibration is complete, DATA\[6:0\] contains the calibration factor. Note: Software can write these bits only when ADEN=1 (ADC is enabled and no calibration is ongoing and no conversion is ongoing). Refer to SQ8\[3:0\] for a definition of channel selection.
pub type CALFACT_R = crate::FieldReader;
///Field `CALFACT` writer - Calibration factor These bits are written by hardware or by software. Once a calibration is complete,they are updated by hardware with the calibration factors. Software can write these bits with a new calibration factor. If the new calibration factor is different from the current one stored into the analog ADC, it is then applied once a new calibration is launched. Just after a calibration is complete, DATA\[6:0\] contains the calibration factor. Note: Software can write these bits only when ADEN=1 (ADC is enabled and no calibration is ongoing and no conversion is ongoing). Refer to SQ8\[3:0\] for a definition of channel selection.
pub type CALFACT_W<'a, REG> = crate::FieldWriter<'a, REG, 7, u8, crate::Safe>;
impl R {
    ///Bits 0:6 - Calibration factor These bits are written by hardware or by software. Once a calibration is complete,they are updated by hardware with the calibration factors. Software can write these bits with a new calibration factor. If the new calibration factor is different from the current one stored into the analog ADC, it is then applied once a new calibration is launched. Just after a calibration is complete, DATA\[6:0\] contains the calibration factor. Note: Software can write these bits only when ADEN=1 (ADC is enabled and no calibration is ongoing and no conversion is ongoing). Refer to SQ8\[3:0\] for a definition of channel selection.
    #[inline(always)]
    pub fn calfact(&self) -> CALFACT_R {
        CALFACT_R::new((self.bits & 0x7f) as u8)
    }
}
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("CALFACT")
            .field("calfact", &self.calfact())
            .finish()
    }
}
impl W {
    ///Bits 0:6 - Calibration factor These bits are written by hardware or by software. Once a calibration is complete,they are updated by hardware with the calibration factors. Software can write these bits with a new calibration factor. If the new calibration factor is different from the current one stored into the analog ADC, it is then applied once a new calibration is launched. Just after a calibration is complete, DATA\[6:0\] contains the calibration factor. Note: Software can write these bits only when ADEN=1 (ADC is enabled and no calibration is ongoing and no conversion is ongoing). Refer to SQ8\[3:0\] for a definition of channel selection.
    #[inline(always)]
    pub fn calfact(&mut self) -> CALFACT_W<CALFACTrs> {
        CALFACT_W::new(self, 0)
    }
}
/**ADC Calibration factor

You can [`read`](crate::Reg::read) this register and get [`calfact::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`calfact::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).

See register [structure](https://stm32-rs.github.io/stm32-rs/STM32G070.html#ADC:CALFACT)*/
pub struct CALFACTrs;
impl crate::RegisterSpec for CALFACTrs {
    type Ux = u32;
}
///`read()` method returns [`calfact::R`](R) reader structure
impl crate::Readable for CALFACTrs {}
///`write(|w| ..)` method takes [`calfact::W`](W) writer structure
impl crate::Writable for CALFACTrs {
    type Safety = crate::Unsafe;
}
///`reset()` method sets CALFACT to value 0
impl crate::Resettable for CALFACTrs {}