1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
///Register `AWD2CR` reader
pub type R = crate::R<AWD2CRrs>;
///Register `AWD2CR` writer
pub type W = crate::W<AWD2CRrs>;
/**Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
Value on reset: 0*/
#[cfg_attr(feature = "defmt", derive(defmt::Format))]
#[derive(Clone, Copy, Debug, PartialEq, Eq)]
pub enum AWD2CH0 {
///0: ADC analog channel-x is not monitored by AWD2
NotMonitored = 0,
///1: ADC analog channel-x is monitored by AWD2
Monitored = 1,
}
impl From<AWD2CH0> for bool {
#[inline(always)]
fn from(variant: AWD2CH0) -> Self {
variant as u8 != 0
}
}
///Field `AWD2CH(0-18)` reader - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
pub type AWD2CH_R = crate::BitReader<AWD2CH0>;
impl AWD2CH_R {
///Get enumerated values variant
#[inline(always)]
pub const fn variant(&self) -> AWD2CH0 {
match self.bits {
false => AWD2CH0::NotMonitored,
true => AWD2CH0::Monitored,
}
}
///ADC analog channel-x is not monitored by AWD2
#[inline(always)]
pub fn is_not_monitored(&self) -> bool {
*self == AWD2CH0::NotMonitored
}
///ADC analog channel-x is monitored by AWD2
#[inline(always)]
pub fn is_monitored(&self) -> bool {
*self == AWD2CH0::Monitored
}
}
///Field `AWD2CH(0-18)` writer - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
pub type AWD2CH_W<'a, REG> = crate::BitWriter<'a, REG, AWD2CH0>;
impl<'a, REG> AWD2CH_W<'a, REG>
where
REG: crate::Writable + crate::RegisterSpec,
{
///ADC analog channel-x is not monitored by AWD2
#[inline(always)]
pub fn not_monitored(self) -> &'a mut crate::W<REG> {
self.variant(AWD2CH0::NotMonitored)
}
///ADC analog channel-x is monitored by AWD2
#[inline(always)]
pub fn monitored(self) -> &'a mut crate::W<REG> {
self.variant(AWD2CH0::Monitored)
}
}
impl R {
///Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
///
///<div class="warning">`n` is number of field in register. `n == 0` corresponds to `AWD2CH0` field.</div>
#[inline(always)]
pub fn awd2ch(&self, n: u8) -> AWD2CH_R {
#[allow(clippy::no_effect)]
[(); 19][n as usize];
AWD2CH_R::new(((self.bits >> n) & 1) != 0)
}
///Iterator for array of:
///Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch_iter(&self) -> impl Iterator<Item = AWD2CH_R> + '_ {
(0..19).map(move |n| AWD2CH_R::new(((self.bits >> n) & 1) != 0))
}
///Bit 0 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch0(&self) -> AWD2CH_R {
AWD2CH_R::new((self.bits & 1) != 0)
}
///Bit 1 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch1(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 1) & 1) != 0)
}
///Bit 2 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch2(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 2) & 1) != 0)
}
///Bit 3 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch3(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 3) & 1) != 0)
}
///Bit 4 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch4(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 4) & 1) != 0)
}
///Bit 5 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch5(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 5) & 1) != 0)
}
///Bit 6 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch6(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 6) & 1) != 0)
}
///Bit 7 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch7(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 7) & 1) != 0)
}
///Bit 8 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch8(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 8) & 1) != 0)
}
///Bit 9 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch9(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 9) & 1) != 0)
}
///Bit 10 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch10(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 10) & 1) != 0)
}
///Bit 11 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch11(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 11) & 1) != 0)
}
///Bit 12 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch12(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 12) & 1) != 0)
}
///Bit 13 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch13(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 13) & 1) != 0)
}
///Bit 14 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch14(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 14) & 1) != 0)
}
///Bit 15 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch15(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 15) & 1) != 0)
}
///Bit 16 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch16(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 16) & 1) != 0)
}
///Bit 17 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch17(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 17) & 1) != 0)
}
///Bit 18 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch18(&self) -> AWD2CH_R {
AWD2CH_R::new(((self.bits >> 18) & 1) != 0)
}
}
impl core::fmt::Debug for R {
fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
f.debug_struct("AWD2CR")
.field("awd2ch0", &self.awd2ch0())
.field("awd2ch1", &self.awd2ch1())
.field("awd2ch2", &self.awd2ch2())
.field("awd2ch3", &self.awd2ch3())
.field("awd2ch4", &self.awd2ch4())
.field("awd2ch5", &self.awd2ch5())
.field("awd2ch6", &self.awd2ch6())
.field("awd2ch7", &self.awd2ch7())
.field("awd2ch8", &self.awd2ch8())
.field("awd2ch9", &self.awd2ch9())
.field("awd2ch10", &self.awd2ch10())
.field("awd2ch11", &self.awd2ch11())
.field("awd2ch12", &self.awd2ch12())
.field("awd2ch13", &self.awd2ch13())
.field("awd2ch14", &self.awd2ch14())
.field("awd2ch15", &self.awd2ch15())
.field("awd2ch16", &self.awd2ch16())
.field("awd2ch17", &self.awd2ch17())
.field("awd2ch18", &self.awd2ch18())
.finish()
}
}
impl W {
///Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
///
///<div class="warning">`n` is number of field in register. `n == 0` corresponds to `AWD2CH0` field.</div>
#[inline(always)]
pub fn awd2ch(&mut self, n: u8) -> AWD2CH_W<AWD2CRrs> {
#[allow(clippy::no_effect)]
[(); 19][n as usize];
AWD2CH_W::new(self, n)
}
///Bit 0 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch0(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 0)
}
///Bit 1 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch1(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 1)
}
///Bit 2 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch2(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 2)
}
///Bit 3 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch3(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 3)
}
///Bit 4 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch4(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 4)
}
///Bit 5 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch5(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 5)
}
///Bit 6 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch6(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 6)
}
///Bit 7 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch7(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 7)
}
///Bit 8 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch8(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 8)
}
///Bit 9 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch9(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 9)
}
///Bit 10 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch10(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 10)
}
///Bit 11 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch11(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 11)
}
///Bit 12 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch12(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 12)
}
///Bit 13 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch13(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 13)
}
///Bit 14 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch14(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 14)
}
///Bit 15 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch15(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 15)
}
///Bit 16 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch16(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 16)
}
///Bit 17 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch17(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 17)
}
///Bit 18 - Analog watchdog channel selection These bits are set and cleared by software. They enable and select the input channels to be guarded by analog watchdog 2 (AWD2). Note: The channels selected through ADC_AWD2CR must be also configured into the ADC_CHSELR registers. Refer to SQ8\[3:0\] for a definition of channel selection. The software is allowed to write this bit only when ADSTART=0 (which ensures that no conversion is ongoing).
#[inline(always)]
pub fn awd2ch18(&mut self) -> AWD2CH_W<AWD2CRrs> {
AWD2CH_W::new(self, 18)
}
}
/**ADC Analog Watchdog 2 Configuration register
You can [`read`](crate::Reg::read) this register and get [`awd2cr::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`awd2cr::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).
See register [structure](https://stm32-rs.github.io/stm32-rs/STM32G070.html#ADC:AWD2CR)*/
pub struct AWD2CRrs;
impl crate::RegisterSpec for AWD2CRrs {
type Ux = u32;
}
///`read()` method returns [`awd2cr::R`](R) reader structure
impl crate::Readable for AWD2CRrs {}
///`write(|w| ..)` method takes [`awd2cr::W`](W) writer structure
impl crate::Writable for AWD2CRrs {
type Safety = crate::Unsafe;
}
///`reset()` method sets AWD2CR to value 0
impl crate::Resettable for AWD2CRrs {}