Struct efm32gg11b::generic::R

pub struct R<U, T> { /* fields omitted */ }

Register/field reader

Result of the read method of a register. Also it can be used in the modify method

Implementations

impl<U, T> R<U, T> where
    U: Copy, 

pub fn bits(&self) -> U

Read raw bits from register/field

impl<FI> R<bool, FI>

pub fn bit(&self) -> bool

Value of the field as raw bits

pub fn bit_is_clear(&self) -> bool

Returns true if the bit is clear (0)

pub fn bit_is_set(&self) -> bool

Returns true if the bit is set (1)

impl R<u32, Reg<u32, _CTRL>>

pub fn addrfaulten(&self) -> ADDRFAULTEN_R

Bit 0 - Invalid Address Bus Fault Response Enable

pub fn clkdisfaulten(&self) -> CLKDISFAULTEN_R

Bit 1 - Clock-disabled Bus Fault Response Enable

pub fn pwrupondemand(&self) -> PWRUPONDEMAND_R

Bit 2 - Power Up on Demand During Wake Up

pub fn ifcreadclear(&self) -> IFCREADCLEAR_R

Bit 3 - IFC Read Clears IF

pub fn timeoutfaulten(&self) -> TIMEOUTFAULTEN_R

Bit 4 - Timeout Bus Fault Response Enable

pub fn rameccerrfaulten(&self) -> RAMECCERRFAULTEN_R

Bit 5 - Two Bit ECC Error Bus Fault Response Enable

pub fn ebifaulten(&self) -> EBIFAULTEN_R

Bit 6 - EBI Bus Fault Response Enable

pub fn waitmode(&self) -> WAITMODE_R

Bit 12 - Peripheral Access Wait Mode

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_ws0(&self) -> bool

Checks if the value of the field is WS0

pub fn is_ws1(&self) -> bool

Checks if the value of the field is WS1

pub fn is_ws2(&self) -> bool

Checks if the value of the field is WS2

pub fn is_ws3(&self) -> bool

Checks if the value of the field is WS3

impl R<u32, Reg<u32, _READCTRL>>

pub fn ifcdis(&self) -> IFCDIS_R

Bit 3 - Internal Flash Cache Disable

pub fn aidis(&self) -> AIDIS_R

Bit 4 - Automatic Invalidate Disable

pub fn iccdis(&self) -> ICCDIS_R

Bit 5 - Interrupt Context Cache Disable

pub fn ebicdis(&self) -> EBICDIS_R

Bit 6 - External Bus Interface Cache Disable

pub fn prefetch(&self) -> PREFETCH_R

Bit 8 - Prefetch Mode

pub fn usehprot(&self) -> USEHPROT_R

Bit 9 - AHB_HPROT Mode

pub fn qspicdis(&self) -> QSPICDIS_R

Bit 10 - QSPI Cache Disable

pub fn mode(&self) -> MODE_R

Bits 24:25 - Read Mode

pub fn scbtp(&self) -> SCBTP_R

Bit 28 - Suppress Conditional Branch Target Perfetch

impl R<u32, Reg<u32, _WRITECTRL>>

pub fn wren(&self) -> WREN_R

Bit 0 - Enable Write/Erase Controller

pub fn irqeraseabort(&self) -> IRQERASEABORT_R

Bit 1 - Abort Page Erase on Interrupt

pub fn rwwen(&self) -> RWWEN_R

Bit 5 - Read-While-Write Enable

impl R<u32, Reg<u32, _ADDRB>>

pub fn addrb(&self) -> ADDRB_R

Bits 0:31 - Page Erase or Write Address Buffer

impl R<u32, Reg<u32, _WDATA>>

pub fn wdata(&self) -> WDATA_R

Bits 0:31 - Write Data

impl R<u32, Reg<u32, _STATUS>>

pub fn busy(&self) -> BUSY_R

Bit 0 - Erase/Write Busy

pub fn locked(&self) -> LOCKED_R

Bit 1 - Access Locked

pub fn invaddr(&self) -> INVADDR_R

Bit 2 - Invalid Write Address or Erase Page

pub fn wdataready(&self) -> WDATAREADY_R

Bit 3 - WDATA Write Ready

pub fn wordtimeout(&self) -> WORDTIMEOUT_R

Bit 4 - Flash Write Word Timeout

pub fn eraseaborted(&self) -> ERASEABORTED_R

Bit 5 - The Current Flash Erase Operation Aborted

pub fn pcrunning(&self) -> PCRUNNING_R

Bit 6 - Performance Counters Running

pub fn bankswitched(&self) -> BANKSWITCHED_R

Bit 7 - BANK SWITCHING STATUS

pub fn wdatavalid(&self) -> WDATAVALID_R

Bits 24:27 - Write Data Buffer Valid Flag

pub fn pwrupckbdfailcount(&self) -> PWRUPCKBDFAILCOUNT_R

Bits 28:31 - Flash Power Up Checkerboard Pattern Check Fail Count

impl R<u32, Reg<u32, _IF>>

pub fn erase(&self) -> ERASE_R

Bit 0 - Erase Done Interrupt Read Flag

pub fn write(&self) -> WRITE_R

Bit 1 - Write Done Interrupt Read Flag

pub fn chof(&self) -> CHOF_R

Bit 2 - Cache Hits Overflow Interrupt Flag

pub fn cmof(&self) -> CMOF_R

Bit 3 - Cache Misses Overflow Interrupt Flag

pub fn pwrupf(&self) -> PWRUPF_R

Bit 4 - Flash Power Up Sequence Complete Flag

pub fn icacherr(&self) -> ICACHERR_R

Bit 5 - ICache RAM Parity Error Flag

pub fn wdataov(&self) -> WDATAOV_R

Bit 6 - Flash Controller Write Buffer Overflow

pub fn lvewrite(&self) -> LVEWRITE_R

Bit 8 - Flash LVE Write Error Flag

pub fn ramerr1b(&self) -> RAMERR1B_R

Bit 16 - RAM 1-bit ECC Error Interrupt Flag

pub fn ramerr2b(&self) -> RAMERR2B_R

Bit 17 - RAM 2-bit ECC Error Interrupt Flag

pub fn ram1err1b(&self) -> RAM1ERR1B_R

Bit 18 - RAM1 1-bit ECC Error Interrupt Flag

pub fn ram1err2b(&self) -> RAM1ERR2B_R

Bit 19 - RAM1 2-bit ECC Error Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn erase(&self) -> ERASE_R

Bit 0 - ERASE Interrupt Enable

pub fn write(&self) -> WRITE_R

Bit 1 - WRITE Interrupt Enable

pub fn chof(&self) -> CHOF_R

Bit 2 - CHOF Interrupt Enable

pub fn cmof(&self) -> CMOF_R

Bit 3 - CMOF Interrupt Enable

pub fn pwrupf(&self) -> PWRUPF_R

Bit 4 - PWRUPF Interrupt Enable

pub fn icacherr(&self) -> ICACHERR_R

Bit 5 - ICACHERR Interrupt Enable

pub fn wdataov(&self) -> WDATAOV_R

Bit 6 - WDATAOV Interrupt Enable

pub fn lvewrite(&self) -> LVEWRITE_R

Bit 8 - LVEWRITE Interrupt Enable

pub fn ramerr1b(&self) -> RAMERR1B_R

Bit 16 - RAMERR1B Interrupt Enable

pub fn ramerr2b(&self) -> RAMERR2B_R

Bit 17 - RAMERR2B Interrupt Enable

pub fn ram1err1b(&self) -> RAM1ERR1B_R

Bit 18 - RAM1ERR1B Interrupt Enable

pub fn ram1err2b(&self) -> RAM1ERR2B_R

Bit 19 - RAM1ERR2B Interrupt Enable

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - Configuration Lock

impl R<u32, Reg<u32, _CACHEHITS>>

pub fn cachehits(&self) -> CACHEHITS_R

Bits 0:19 - Cache Hits Since Last Performance Counter Start Command

impl R<u32, Reg<u32, _CACHEMISSES>>

pub fn cachemisses(&self) -> CACHEMISSES_R

Bits 0:19 - Cache Misses Since Last Performance Counter Start Command

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _MASSLOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - Mass Erase Lock

impl R<u32, Reg<u32, _STARTUP>>

pub fn stdly0(&self) -> STDLY0_R

Bits 0:9 - Startup Delay 0

pub fn stdly1(&self) -> STDLY1_R

Bits 12:21 - Startup Delay 0

pub fn astwait(&self) -> ASTWAIT_R

Bit 24 - Active Startup Wait

pub fn stwsen(&self) -> STWSEN_R

Bit 25 - Startup Waitstates Enable

pub fn stwsaen(&self) -> STWSAEN_R

Bit 26 - Startup Waitstates Always Enable

pub fn stws(&self) -> STWS_R

Bits 28:30 - Startup Waitstates

impl R<u16, BANKSWITCHLOCKKEY_A>

pub fn variant(&self) -> Variant<u16, BANKSWITCHLOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _BANKSWITCHLOCK>>

pub fn bankswitchlockkey(&self) -> BANKSWITCHLOCKKEY_R

Bits 0:15 - Bank Switching Lock

impl R<u32, Reg<u32, _BOOTLOADERCTRL>>

pub fn blrdis(&self) -> BLRDIS_R

Bit 0 - Flash Bootloader Read Disable

pub fn blwdis(&self) -> BLWDIS_R

Bit 1 - Flash Bootloader Write/Erase Disable

impl R<u8, CACHELPLEVEL_A>

pub fn variant(&self) -> Variant<u8, CACHELPLEVEL_A>

Get enumerated values variant

pub fn is_base(&self) -> bool

Checks if the value of the field is BASE

pub fn is_advanced(&self) -> bool

Checks if the value of the field is ADVANCED

pub fn is_minactivity(&self) -> bool

Checks if the value of the field is MINACTIVITY

impl R<u32, Reg<u32, _CACHECONFIG0>>

pub fn cachelplevel(&self) -> CACHELPLEVEL_R

Bits 0:1 - Instruction Cache Low-Power Level

impl R<u32, Reg<u32, _RAMCTRL>>

pub fn ramwsen(&self) -> RAMWSEN_R

Bit 1 - RAM WAIT STATE Enable

pub fn ramprefetchen(&self) -> RAMPREFETCHEN_R

Bit 2 - RAM Prefetch Enable

pub fn ram1wsen(&self) -> RAM1WSEN_R

Bit 9 - RAM1 WAIT STATE Enable

pub fn ram1prefetchen(&self) -> RAM1PREFETCHEN_R

Bit 10 - RAM1 Prefetch Enable

pub fn ram2cacheen(&self) -> RAM2CACHEEN_R

Bit 16 - RAM2 CACHE Enable

pub fn ram2wsen(&self) -> RAM2WSEN_R

Bit 17 - RAM2 WAIT STATE Enable

pub fn ram2prefetchen(&self) -> RAM2PREFETCHEN_R

Bit 18 - RAM2 Prefetch Enable

impl R<u32, Reg<u32, _ECCCTRL>>

pub fn rameccewen(&self) -> RAMECCEWEN_R

Bit 0 - RAM ECC Write Enable

pub fn rameccchken(&self) -> RAMECCCHKEN_R

Bit 1 - RAM ECC Check Enable

pub fn ram1eccewen(&self) -> RAM1ECCEWEN_R

Bit 2 - RAM1 ECC Write Enable

pub fn ram1eccchken(&self) -> RAM1ECCCHKEN_R

Bit 3 - RAM1 ECC Check Enable

impl R<u32, Reg<u32, _RAMECCADDR>>

pub fn rameccaddr(&self) -> RAMECCADDR_R

Bits 0:31 - RAM ECC Error Address

impl R<u32, Reg<u32, _RAM1ECCADDR>>

pub fn ram1eccaddr(&self) -> RAM1ECCADDR_R

Bits 0:31 - RAM1 ECC Error Address

impl R<u8, EM23VSCALE_A>

pub fn variant(&self) -> Variant<u8, EM23VSCALE_A>

Get enumerated values variant

pub fn is_vscale2(&self) -> bool

Checks if the value of the field is VSCALE2

pub fn is_vscale0(&self) -> bool

Checks if the value of the field is VSCALE0

pub fn is_resv(&self) -> bool

Checks if the value of the field is RESV

impl R<u8, EM4HVSCALE_A>

pub fn variant(&self) -> Variant<u8, EM4HVSCALE_A>

Get enumerated values variant

pub fn is_vscale2(&self) -> bool

Checks if the value of the field is VSCALE2

pub fn is_vscale0(&self) -> bool

Checks if the value of the field is VSCALE0

pub fn is_resv(&self) -> bool

Checks if the value of the field is RESV

impl R<u32, Reg<u32, _CTRL>>

pub fn em2block(&self) -> EM2BLOCK_R

Bit 1 - Energy Mode 2 Block

pub fn em2boddis(&self) -> EM2BODDIS_R

Bit 2 - Disable BOD in EM2

pub fn em01ld(&self) -> EM01LD_R

Bit 3 - Reserved for internal use. Do not change.

pub fn em23vscaleautowsen(&self) -> EM23VSCALEAUTOWSEN_R

Bit 4 - Automatically Configures Flash and Frequency to Wakeup From EM2 or EM3 at Low Voltage

pub fn em23vscale(&self) -> EM23VSCALE_R

Bits 8:9 - EM23 Voltage Scale

pub fn em4hvscale(&self) -> EM4HVSCALE_R

Bits 16:17 - EM4H Voltage Scale

impl R<u8, VSCALE_A>

pub fn variant(&self) -> Variant<u8, VSCALE_A>

Get enumerated values variant

pub fn is_vscale2(&self) -> bool

Checks if the value of the field is VSCALE2

pub fn is_vscale0(&self) -> bool

Checks if the value of the field is VSCALE0

pub fn is_resv(&self) -> bool

Checks if the value of the field is RESV

impl R<u32, Reg<u32, _STATUS>>

pub fn vmonrdy(&self) -> VMONRDY_R

Bit 0 - VMON Ready

pub fn vmonavdd(&self) -> VMONAVDD_R

Bit 1 - VMON AVDD Channel

pub fn vmonaltavdd(&self) -> VMONALTAVDD_R

Bit 2 - Alternate VMON AVDD Channel

pub fn vmondvdd(&self) -> VMONDVDD_R

Bit 3 - VMON DVDD Channel

pub fn vmonio0(&self) -> VMONIO0_R

Bit 4 - VMON IOVDD0 Channel

pub fn vmonio1(&self) -> VMONIO1_R

Bit 5 - VMON IOVDD1 Channel

pub fn vmonbuvdd(&self) -> VMONBUVDD_R

Bit 7 - VMON BUVDD Channel

pub fn burdy(&self) -> BURDY_R

Bit 12 - Backup Mode Ready

pub fn vscale(&self) -> VSCALE_R

Bits 16:17 - Current Voltage Scale Value

pub fn vscalebusy(&self) -> VSCALEBUSY_R

Bit 18 - System is Busy Scaling Voltage

pub fn em4ioret(&self) -> EM4IORET_R

Bit 20 - IO Retention Status

pub fn tempactive(&self) -> TEMPACTIVE_R

Bit 26 - Temperature Measurement Active

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - Configuration Lock Key

impl R<u8, RAMPOWERDOWN_A>

pub fn variant(&self) -> Variant<u8, RAMPOWERDOWN_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_blk7(&self) -> bool

Checks if the value of the field is BLK7

pub fn is_blk6to7(&self) -> bool

Checks if the value of the field is BLK6TO7

pub fn is_blk5to7(&self) -> bool

Checks if the value of the field is BLK5TO7

pub fn is_blk4to7(&self) -> bool

Checks if the value of the field is BLK4TO7

pub fn is_blk3to7(&self) -> bool

Checks if the value of the field is BLK3TO7

pub fn is_blk2to7(&self) -> bool

Checks if the value of the field is BLK2TO7

pub fn is_blk1to7(&self) -> bool

Checks if the value of the field is BLK1TO7

impl R<u32, Reg<u32, _RAM0CTRL>>

pub fn rampowerdown(&self) -> RAMPOWERDOWN_R

Bits 0:6 - RAM0 Blockset Power-down

impl R<u8, EM4IORETMODE_A>

pub fn variant(&self) -> Variant<u8, EM4IORETMODE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_em4exit(&self) -> bool

Checks if the value of the field is EM4EXIT

pub fn is_swunlatch(&self) -> bool

Checks if the value of the field is SWUNLATCH

impl R<u32, Reg<u32, _EM4CTRL>>

pub fn em4state(&self) -> EM4STATE_R

Bit 0 - Energy Mode 4 State

pub fn retainlfrco(&self) -> RETAINLFRCO_R

Bit 1 - LFRCO Retain During EM4

pub fn retainlfxo(&self) -> RETAINLFXO_R

Bit 2 - LFXO Retain During EM4

pub fn retainulfrco(&self) -> RETAINULFRCO_R

Bit 3 - ULFRCO Retain During EM4S

pub fn em4ioretmode(&self) -> EM4IORETMODE_R

Bits 4:5 - EM4 IO Retention Disable

impl R<u32, Reg<u32, _TEMPLIMITS>>

pub fn templow(&self) -> TEMPLOW_R

Bits 0:7 - Temperature Low Limit

pub fn temphigh(&self) -> TEMPHIGH_R

Bits 8:15 - Temperature High Limit

pub fn em4wuen(&self) -> EM4WUEN_R

Bit 16 - Enable EM4 Wakeup Due to Low/high Temperature

impl R<u32, Reg<u32, _TEMP>>

pub fn temp(&self) -> TEMP_R

Bits 0:7 - Temperature Measurement

impl R<u32, Reg<u32, _IF>>

pub fn vmonavddfall(&self) -> VMONAVDDFALL_R

Bit 0 - VMON AVDD Channel Fall

pub fn vmonavddrise(&self) -> VMONAVDDRISE_R

Bit 1 - VMON AVDD Channel Rise

pub fn vmonaltavddfall(&self) -> VMONALTAVDDFALL_R

Bit 2 - Alternate VMON AVDD Channel Fall

pub fn vmonaltavddrise(&self) -> VMONALTAVDDRISE_R

Bit 3 - Alternate VMON AVDD Channel Rise

pub fn vmondvddfall(&self) -> VMONDVDDFALL_R

Bit 4 - VMON DVDD Channel Fall

pub fn vmondvddrise(&self) -> VMONDVDDRISE_R

Bit 5 - VMON DVDD Channel Rise

pub fn vmonio0fall(&self) -> VMONIO0FALL_R

Bit 6 - VMON IOVDD0 Channel Fall

pub fn vmonio0rise(&self) -> VMONIO0RISE_R

Bit 7 - VMON IOVDD0 Channel Rise

pub fn vmonio1fall(&self) -> VMONIO1FALL_R

Bit 8 - VMON IOVDD1 Channel Fall

pub fn vmonio1rise(&self) -> VMONIO1RISE_R

Bit 9 - VMON IOVDD1 Channel Rise

pub fn r5vready(&self) -> R5VREADY_R

Bit 10 - 5V Regulator is Ready to Use

pub fn vmonbuvddfall(&self) -> VMONBUVDDFALL_R

Bit 12 - VMON BACKUP Channel Fall

pub fn vmonbuvddrise(&self) -> VMONBUVDDRISE_R

Bit 13 - VMON BUVDD Channel Rise

pub fn pfetovercurrentlimit(&self) -> PFETOVERCURRENTLIMIT_R

Bit 16 - PFET Current Limit Hit

pub fn nfetovercurrentlimit(&self) -> NFETOVERCURRENTLIMIT_R

Bit 17 - NFET Current Limit Hit

pub fn dcdclprunning(&self) -> DCDCLPRUNNING_R

Bit 18 - LP Mode is Running

pub fn dcdclnrunning(&self) -> DCDCLNRUNNING_R

Bit 19 - LN Mode is Running

pub fn dcdcinbypass(&self) -> DCDCINBYPASS_R

Bit 20 - DCDC is in Bypass

pub fn burdy(&self) -> BURDY_R

Bit 22 - Backup Functionality Ready Interrupt Flag

pub fn r5vvsint(&self) -> R5VVSINT_R

Bit 23 - 5V Regulator Voltage Update Done

pub fn em23wakeup(&self) -> EM23WAKEUP_R

Bit 24 - Wakeup IRQ From EM2 and EM3

pub fn vscaledone(&self) -> VSCALEDONE_R

Bit 25 - Voltage Scale Steps Done IRQ

pub fn temp(&self) -> TEMP_R

Bit 29 - New Temperature Measurement Valid

pub fn templow(&self) -> TEMPLOW_R

Bit 30 - Temperature Low Limit Reached

pub fn temphigh(&self) -> TEMPHIGH_R

Bit 31 - Temperature High Limit Reached

impl R<u32, Reg<u32, _IEN>>

pub fn vmonavddfall(&self) -> VMONAVDDFALL_R

Bit 0 - VMONAVDDFALL Interrupt Enable

pub fn vmonavddrise(&self) -> VMONAVDDRISE_R

Bit 1 - VMONAVDDRISE Interrupt Enable

pub fn vmonaltavddfall(&self) -> VMONALTAVDDFALL_R

Bit 2 - VMONALTAVDDFALL Interrupt Enable

pub fn vmonaltavddrise(&self) -> VMONALTAVDDRISE_R

Bit 3 - VMONALTAVDDRISE Interrupt Enable

pub fn vmondvddfall(&self) -> VMONDVDDFALL_R

Bit 4 - VMONDVDDFALL Interrupt Enable

pub fn vmondvddrise(&self) -> VMONDVDDRISE_R

Bit 5 - VMONDVDDRISE Interrupt Enable

pub fn vmonio0fall(&self) -> VMONIO0FALL_R

Bit 6 - VMONIO0FALL Interrupt Enable

pub fn vmonio0rise(&self) -> VMONIO0RISE_R

Bit 7 - VMONIO0RISE Interrupt Enable

pub fn vmonio1fall(&self) -> VMONIO1FALL_R

Bit 8 - VMONIO1FALL Interrupt Enable

pub fn vmonio1rise(&self) -> VMONIO1RISE_R

Bit 9 - VMONIO1RISE Interrupt Enable

pub fn r5vready(&self) -> R5VREADY_R

Bit 10 - R5VREADY Interrupt Enable

pub fn vmonbuvddfall(&self) -> VMONBUVDDFALL_R

Bit 12 - VMONBUVDDFALL Interrupt Enable

pub fn vmonbuvddrise(&self) -> VMONBUVDDRISE_R

Bit 13 - VMONBUVDDRISE Interrupt Enable

pub fn pfetovercurrentlimit(&self) -> PFETOVERCURRENTLIMIT_R

Bit 16 - PFETOVERCURRENTLIMIT Interrupt Enable

pub fn nfetovercurrentlimit(&self) -> NFETOVERCURRENTLIMIT_R

Bit 17 - NFETOVERCURRENTLIMIT Interrupt Enable

pub fn dcdclprunning(&self) -> DCDCLPRUNNING_R

Bit 18 - DCDCLPRUNNING Interrupt Enable

pub fn dcdclnrunning(&self) -> DCDCLNRUNNING_R

Bit 19 - DCDCLNRUNNING Interrupt Enable

pub fn dcdcinbypass(&self) -> DCDCINBYPASS_R

Bit 20 - DCDCINBYPASS Interrupt Enable

pub fn burdy(&self) -> BURDY_R

Bit 22 - BURDY Interrupt Enable

pub fn r5vvsint(&self) -> R5VVSINT_R

Bit 23 - R5VVSINT Interrupt Enable

pub fn em23wakeup(&self) -> EM23WAKEUP_R

Bit 24 - EM23WAKEUP Interrupt Enable

pub fn vscaledone(&self) -> VSCALEDONE_R

Bit 25 - VSCALEDONE Interrupt Enable

pub fn temp(&self) -> TEMP_R

Bit 29 - TEMP Interrupt Enable

pub fn templow(&self) -> TEMPLOW_R

Bit 30 - TEMPLOW Interrupt Enable

pub fn temphigh(&self) -> TEMPHIGH_R

Bit 31 - TEMPHIGH Interrupt Enable

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _PWRLOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - Regulator and Supply Configuration Lock Key

impl R<u32, Reg<u32, _PWRCTRL>>

pub fn anasw(&self) -> ANASW_R

Bit 5 - Analog Switch Selection

pub fn regpwrsel(&self) -> REGPWRSEL_R

Bit 10 - This Field Selects the Input Supply Pin for the Digital LDO

pub fn immediatepwrswitch(&self) -> IMMEDIATEPWRSWITCH_R

Bit 13 - Allows Immediate Switching of ANASW and REGPWRSEL Bitfields

impl R<u8, DCDCMODE_A>

pub fn variant(&self) -> DCDCMODE_A

Get enumerated values variant

pub fn is_bypass(&self) -> bool

Checks if the value of the field is BYPASS

pub fn is_lownoise(&self) -> bool

Checks if the value of the field is LOWNOISE

pub fn is_lowpower(&self) -> bool

Checks if the value of the field is LOWPOWER

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

impl R<u32, Reg<u32, _DCDCCTRL>>

pub fn dcdcmode(&self) -> DCDCMODE_R

Bits 0:1 - Regulator Mode

pub fn dcdcmodeem23(&self) -> DCDCMODEEM23_R

Bit 4 - DCDC Mode EM23

pub fn dcdcmodeem4(&self) -> DCDCMODEEM4_R

Bit 5 - DCDC Mode EM4H

impl R<u8, LPCMPBIASEM234H_A>

pub fn variant(&self) -> LPCMPBIASEM234H_A

Get enumerated values variant

pub fn is_bias0(&self) -> bool

Checks if the value of the field is BIAS0

pub fn is_bias1(&self) -> bool

Checks if the value of the field is BIAS1

pub fn is_bias2(&self) -> bool

Checks if the value of the field is BIAS2

pub fn is_bias3(&self) -> bool

Checks if the value of the field is BIAS3

impl R<u32, Reg<u32, _DCDCMISCCTRL>>

pub fn lnforceccm(&self) -> LNFORCECCM_R

Bit 0 - Force DCDC Into CCM Mode in Low Noise Operation

pub fn lpcmphysdis(&self) -> LPCMPHYSDIS_R

Bit 1 - Disable LP Mode Hysteresis in the State Machine Control

pub fn lpcmphyshi(&self) -> LPCMPHYSHI_R

Bit 2 - Comparator Threshold on the High Side

pub fn lnforceccmimm(&self) -> LNFORCECCMIMM_R

Bit 5 - Force DCDC Into CCM Mode Immediately, Based on LNFORCECCM

pub fn pfetcnt(&self) -> PFETCNT_R

Bits 8:11 - PFET Switch Number Selection

pub fn nfetcnt(&self) -> NFETCNT_R

Bits 12:15 - NFET Switch Number Selection

pub fn byplimsel(&self) -> BYPLIMSEL_R

Bits 16:19 - Current Limit in Bypass Mode

pub fn lpclimilimsel(&self) -> LPCLIMILIMSEL_R

Bits 20:22 - Current Limit Level Selection for Current Limiter in LP Mode

pub fn lnclimilimsel(&self) -> LNCLIMILIMSEL_R

Bits 24:26 - Current Limit Level Selection for Current Limiter in LN Mode

pub fn lpcmpbiasem234h(&self) -> LPCMPBIASEM234H_R

Bits 28:29 - LP Mode Comparator Bias Selection for EM23 or EM4H

impl R<u32, Reg<u32, _DCDCZDETCTRL>>

pub fn zdetilimsel(&self) -> ZDETILIMSEL_R

Bits 4:6 - Reverse Current Limit Level Selection for Zero Detector

pub fn zdetblankdly(&self) -> ZDETBLANKDLY_R

Bits 8:9 - Reserved for internal use. Do not change.

impl R<u32, Reg<u32, _DCDCCLIMCTRL>>

pub fn climblankdly(&self) -> CLIMBLANKDLY_R

Bits 8:9 - Reserved for internal use. Do not change.

pub fn byplimen(&self) -> BYPLIMEN_R

Bit 13 - Bypass Current Limit Enable

impl R<u32, Reg<u32, _DCDCLNCOMPCTRL>>

pub fn compenr1(&self) -> COMPENR1_R

Bits 0:2 - Low Noise Mode Compensator R1 Trim Value

pub fn compenr2(&self) -> COMPENR2_R

Bits 4:8 - Low Noise Mode Compensator R2 Trim Value

pub fn compenr3(&self) -> COMPENR3_R

Bits 12:15 - Low Noise Mode Compensator R3 Trim Value

pub fn compenc1(&self) -> COMPENC1_R

Bits 20:21 - Low Noise Mode Compensator C1 Trim Value

pub fn compenc2(&self) -> COMPENC2_R

Bits 24:26 - Low Noise Mode Compensator C2 Trim Value

pub fn compenc3(&self) -> COMPENC3_R

Bits 28:31 - Low Noise Mode Compensator C3 Trim Value

impl R<u32, Reg<u32, _DCDCLNVCTRL>>

pub fn lnatt(&self) -> LNATT_R

Bit 1 - Low Noise Mode Feedback Attenuation

pub fn lnvref(&self) -> LNVREF_R

Bits 8:14 - Low Noise Mode VREF Trim

impl R<u32, Reg<u32, _DCDCLPVCTRL>>

pub fn lpatt(&self) -> LPATT_R

Bit 0 - Low Power Feedback Attenuation

pub fn lpvref(&self) -> LPVREF_R

Bits 1:8 - LP Mode Reference Selection for EM23 and EM4H

impl R<u32, Reg<u32, _DCDCLPCTRL>>

pub fn lpcmphysselem234h(&self) -> LPCMPHYSSELEM234H_R

Bits 12:15 - LP Mode Hysteresis Selection for EM23 and EM4H

pub fn lpvrefdutyen(&self) -> LPVREFDUTYEN_R

Bit 24 - LP Mode Duty Cycling Enable

pub fn lpblank(&self) -> LPBLANK_R

Bits 25:26 - Reserved for internal use. Do not change.

impl R<u32, Reg<u32, _DCDCLNFREQCTRL>>

pub fn rcoband(&self) -> RCOBAND_R

Bits 0:2 - LN Mode RCO Frequency Band Selection

pub fn rcotrim(&self) -> RCOTRIM_R

Bits 24:28 - Reserved for internal use. Do not change.

impl R<u32, Reg<u32, _DCDCSYNC>>

pub fn dcdcctrlbusy(&self) -> DCDCCTRLBUSY_R

Bit 0 - DCDC CTRL Register Transfer Busy

impl R<u32, Reg<u32, _VMONAVDDCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable

pub fn risewu(&self) -> RISEWU_R

Bit 2 - Rise Wakeup

pub fn fallwu(&self) -> FALLWU_R

Bit 3 - Fall Wakeup

pub fn fallthresfine(&self) -> FALLTHRESFINE_R

Bits 8:11 - Falling Threshold Fine Adjust

pub fn fallthrescoarse(&self) -> FALLTHRESCOARSE_R

Bits 12:15 - Falling Threshold Coarse Adjust

pub fn risethresfine(&self) -> RISETHRESFINE_R

Bits 16:19 - Rising Threshold Fine Adjust

pub fn risethrescoarse(&self) -> RISETHRESCOARSE_R

Bits 20:23 - Rising Threshold Coarse Adjust

impl R<u32, Reg<u32, _VMONALTAVDDCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable

pub fn risewu(&self) -> RISEWU_R

Bit 2 - Rise Wakeup

pub fn fallwu(&self) -> FALLWU_R

Bit 3 - Fall Wakeup

pub fn thresfine(&self) -> THRESFINE_R

Bits 8:11 - Threshold Fine Adjust

pub fn threscoarse(&self) -> THRESCOARSE_R

Bits 12:15 - Threshold Coarse Adjust

impl R<u32, Reg<u32, _VMONDVDDCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable

pub fn risewu(&self) -> RISEWU_R

Bit 2 - Rise Wakeup

pub fn fallwu(&self) -> FALLWU_R

Bit 3 - Fall Wakeup

pub fn thresfine(&self) -> THRESFINE_R

Bits 8:11 - Threshold Fine Adjust

pub fn threscoarse(&self) -> THRESCOARSE_R

Bits 12:15 - Threshold Coarse Adjust

impl R<u32, Reg<u32, _VMONIO0CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable

pub fn risewu(&self) -> RISEWU_R

Bit 2 - Rise Wakeup

pub fn fallwu(&self) -> FALLWU_R

Bit 3 - Fall Wakeup

pub fn retdis(&self) -> RETDIS_R

Bit 4 - EM4 IO0 Retention Disable

pub fn thresfine(&self) -> THRESFINE_R

Bits 8:11 - Threshold Fine Adjust

pub fn threscoarse(&self) -> THRESCOARSE_R

Bits 12:15 - Threshold Coarse Adjust

impl R<u32, Reg<u32, _VMONIO1CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable

pub fn risewu(&self) -> RISEWU_R

Bit 2 - Rise Wakeup

pub fn fallwu(&self) -> FALLWU_R

Bit 3 - Fall Wakeup

pub fn retdis(&self) -> RETDIS_R

Bit 4 - EM4 IO1 Retention Disable

pub fn thresfine(&self) -> THRESFINE_R

Bits 8:11 - Threshold Fine Adjust

pub fn threscoarse(&self) -> THRESCOARSE_R

Bits 12:15 - Threshold Coarse Adjust

impl R<u32, Reg<u32, _VMONBUVDDCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable

pub fn risewu(&self) -> RISEWU_R

Bit 2 - Rise Wakeup

pub fn fallwu(&self) -> FALLWU_R

Bit 3 - Fall Wakeup

pub fn thresfine(&self) -> THRESFINE_R

Bits 8:11 - Threshold Fine Adjust

pub fn threscoarse(&self) -> THRESCOARSE_R

Bits 12:15 - Threshold Coarse Adjust

impl R<u8, RAMPOWERDOWN_A>

pub fn variant(&self) -> Variant<u8, RAMPOWERDOWN_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_blk7(&self) -> bool

Checks if the value of the field is BLK7

pub fn is_blk6to7(&self) -> bool

Checks if the value of the field is BLK6TO7

pub fn is_blk5to7(&self) -> bool

Checks if the value of the field is BLK5TO7

pub fn is_blk4to7(&self) -> bool

Checks if the value of the field is BLK4TO7

pub fn is_blk3to7(&self) -> bool

Checks if the value of the field is BLK3TO7

pub fn is_blk2to7(&self) -> bool

Checks if the value of the field is BLK2TO7

pub fn is_blk1to7(&self) -> bool

Checks if the value of the field is BLK1TO7

pub fn is_blk0to7(&self) -> bool

Checks if the value of the field is BLK0TO7

impl R<u32, Reg<u32, _RAM1CTRL>>

pub fn rampowerdown(&self) -> RAMPOWERDOWN_R

Bits 0:7 - RAM1 Blockset Power-down

impl R<u8, RAMPOWERDOWN_A>

pub fn variant(&self) -> Variant<u8, RAMPOWERDOWN_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_blk3(&self) -> bool

Checks if the value of the field is BLK3

pub fn is_blk2to3(&self) -> bool

Checks if the value of the field is BLK2TO3

pub fn is_blk1to3(&self) -> bool

Checks if the value of the field is BLK1TO3

pub fn is_blk0to3(&self) -> bool

Checks if the value of the field is BLK0TO3

impl R<u32, Reg<u32, _RAM2CTRL>>

pub fn rampowerdown(&self) -> RAMPOWERDOWN_R

Bits 0:3 - RAM2 Blockset Power-down

impl R<u8, VOUTRES_A>

pub fn variant(&self) -> VOUTRES_A

Get enumerated values variant

pub fn is_dis(&self) -> bool

Checks if the value of the field is DIS

pub fn is_weak(&self) -> bool

Checks if the value of the field is WEAK

pub fn is_med(&self) -> bool

Checks if the value of the field is MED

pub fn is_strong(&self) -> bool

Checks if the value of the field is STRONG

impl R<u8, PWRRES_A>

pub fn variant(&self) -> PWRRES_A

Get enumerated values variant

pub fn is_res0(&self) -> bool

Checks if the value of the field is RES0

pub fn is_res1(&self) -> bool

Checks if the value of the field is RES1

pub fn is_res2(&self) -> bool

Checks if the value of the field is RES2

pub fn is_res3(&self) -> bool

Checks if the value of the field is RES3

impl R<u8, BUACTPWRCON_A>

pub fn variant(&self) -> BUACTPWRCON_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_mainbu(&self) -> bool

Checks if the value of the field is MAINBU

pub fn is_bumain(&self) -> bool

Checks if the value of the field is BUMAIN

pub fn is_nodiode(&self) -> bool

Checks if the value of the field is NODIODE

impl R<u8, BUINACTPWRCON_A>

pub fn variant(&self) -> BUINACTPWRCON_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_mainbu(&self) -> bool

Checks if the value of the field is MAINBU

pub fn is_bumain(&self) -> bool

Checks if the value of the field is BUMAIN

pub fn is_nodiode(&self) -> bool

Checks if the value of the field is NODIODE

impl R<u32, Reg<u32, _BUCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable Backup Mode

pub fn staten(&self) -> STATEN_R

Bit 1 - Enable Backup Mode Status Export

pub fn buvinprobeen(&self) -> BUVINPROBEEN_R

Bit 2 - Enable BU_VIN Probing

pub fn voutres(&self) -> VOUTRES_R

Bits 8:9 - BU_VOUT Resistor Select

pub fn pwrres(&self) -> PWRRES_R

Bits 12:13 - Power Domain Resistor Select

pub fn buactpwrcon(&self) -> BUACTPWRCON_R

Bits 16:17 - Power Connection Configuration in Backup Mode

pub fn buinactpwrcon(&self) -> BUINACTPWRCON_R

Bits 20:21 - Power Connection Configuration When Not in Backup Mode

pub fn dismaxcomp(&self) -> DISMAXCOMP_R

Bit 31 - Disable MAIN-BU Comparator

impl R<u8, INPUTMODE_A>

pub fn variant(&self) -> Variant<u8, INPUTMODE_A>

Get enumerated values variant

pub fn is_auto(&self) -> bool

Checks if the value of the field is AUTO

pub fn is_vbus(&self) -> bool

Checks if the value of the field is VBUS

pub fn is_vregi(&self) -> bool

Checks if the value of the field is VREGI

impl R<u32, Reg<u32, _R5VCTRL>>

pub fn bypass(&self) -> BYPASS_R

Bit 0 - 5V Regulator Bypass

pub fn em4wuen(&self) -> EM4WUEN_R

Bit 1 - Enable EM4 Wakeup Due to VBUS Detection

pub fn imonen(&self) -> IMONEN_R

Bit 2 - Enable the Regulator Current Monitor for Selected Current Path to Either VREGI or VBUS

pub fn inputmode(&self) -> INPUTMODE_R

Bits 8:9 - 5V Input Mode

impl R<u8, AMUXSEL_A>

pub fn variant(&self) -> Variant<u8, AMUXSEL_A>

Get enumerated values variant

pub fn is_vbusdiv10(&self) -> bool

Checks if the value of the field is VBUSDIV10

pub fn is_vregidiv10(&self) -> bool

Checks if the value of the field is VREGIDIV10

pub fn is_vregodiv6(&self) -> bool

Checks if the value of the field is VREGODIV6

pub fn is_vregiimon(&self) -> bool

Checks if the value of the field is VREGIIMON

pub fn is_vbusimon(&self) -> bool

Checks if the value of the field is VBUSIMON

impl R<u32, Reg<u32, _R5VADCCTRL>>

pub fn enamux(&self) -> ENAMUX_R

Bit 0 - Enable the 5V Subsystem ADC MUX

pub fn amuxsel(&self) -> AMUXSEL_R

Bits 12:15 - ADC Mux Selection

impl R<u32, Reg<u32, _R5VOUTLEVEL>>

pub fn outlevel(&self) -> OUTLEVEL_R

Bits 0:3 - 5V Regulator Voltage

impl R<u32, Reg<u32, _R5VDETCTRL>>

pub fn vregidetdis(&self) -> VREGIDETDIS_R

Bit 0 - VREGI Detector Disable

pub fn vbusdetdis(&self) -> VBUSDETDIS_R

Bit 1 - VBUS Detector Disable

pub fn vregodetdis(&self) -> VREGODETDIS_R

Bit 2 - VREGO Detector Disable

impl R<u8, LPCMPBIASEM01_A>

pub fn variant(&self) -> LPCMPBIASEM01_A

Get enumerated values variant

pub fn is_bias0(&self) -> bool

Checks if the value of the field is BIAS0

pub fn is_bias1(&self) -> bool

Checks if the value of the field is BIAS1

pub fn is_bias2(&self) -> bool

Checks if the value of the field is BIAS2

pub fn is_bias3(&self) -> bool

Checks if the value of the field is BIAS3

impl R<u32, Reg<u32, _DCDCLPEM01CFG>>

pub fn lpcmpbiasem01(&self) -> LPCMPBIASEM01_R

Bits 8:9 - LP Mode Comparator Bias Selection for EM01

pub fn lpcmphysselem01(&self) -> LPCMPHYSSELEM01_R

Bits 12:15 - LP Mode Hysteresis Selection for EM01

impl R<u32, Reg<u32, _R5VSTATUS>>

pub fn vregidet(&self) -> VREGIDET_R

Bit 0 - VREGI Detected

pub fn vbusdet(&self) -> VBUSDET_R

Bit 1 - USB VBUS Detected

pub fn vregodet(&self) -> VREGODET_R

Bit 2 - VREGO Detected

pub fn vbusgtvregi(&self) -> VBUSGTVREGI_R

Bit 3 - Output of the Supply Comparator Between VBUS and VREGI

pub fn ldodropoutdet(&self) -> LDODROPOUTDET_R

Bit 4 - Regulator Dropout Detection

pub fn coldstart(&self) -> COLDSTART_R

Bit 5 - Indicates If the Regulator is Going Through a Cold Start

impl R<u32, Reg<u32, _R5VSYNC>>

pub fn outlevelbusy(&self) -> OUTLEVELBUSY_R

Bit 0 - 5V Regulator Voltage Register Transfer Busy

impl R<u32, Reg<u32, _EM23PERNORETAINSTATUS>>

pub fn acmp0locked(&self) -> ACMP0LOCKED_R

Bit 0 - Indicates If ACMP0 Powered Down During EM23

pub fn acmp1locked(&self) -> ACMP1LOCKED_R

Bit 1 - Indicates If ACMP1 Powered Down During EM23

pub fn pcnt0locked(&self) -> PCNT0LOCKED_R

Bit 2 - Indicates If PCNT0 Powered Down During EM23

pub fn pcnt1locked(&self) -> PCNT1LOCKED_R

Bit 3 - Indicates If PCNT1 Powered Down During EM23

pub fn pcnt2locked(&self) -> PCNT2LOCKED_R

Bit 4 - Indicates If PCNT2 Powered Down During EM23

pub fn i2c0locked(&self) -> I2C0LOCKED_R

Bit 5 - Indicates If I2C0 Powered Down During EM23

pub fn i2c1locked(&self) -> I2C1LOCKED_R

Bit 6 - Indicates If I2C1 Powered Down During EM23

pub fn dac0locked(&self) -> DAC0LOCKED_R

Bit 7 - Indicates If DAC0 Powered Down During EM23

pub fn idac0locked(&self) -> IDAC0LOCKED_R

Bit 8 - Indicates If IDAC0 Powered Down During EM23

pub fn adc0locked(&self) -> ADC0LOCKED_R

Bit 9 - Indicates If ADC0 Powered Down During EM23

pub fn letimer0locked(&self) -> LETIMER0LOCKED_R

Bit 10 - Indicates If LETIMER0 Powered Down During EM23

pub fn wdog0locked(&self) -> WDOG0LOCKED_R

Bit 11 - Indicates If WDOG0 Powered Down During EM23

pub fn wdog1locked(&self) -> WDOG1LOCKED_R

Bit 12 - Indicates If WDOG1 Powered Down During EM23

pub fn lesense0locked(&self) -> LESENSE0LOCKED_R

Bit 13 - Indicates If LESENSE0 Powered Down During EM23

pub fn csenlocked(&self) -> CSENLOCKED_R

Bit 14 - Indicates If CSEN Powered Down During EM23

pub fn leuart0locked(&self) -> LEUART0LOCKED_R

Bit 15 - Indicates If LEUART0 Powered Down During EM23

pub fn leuart1locked(&self) -> LEUART1LOCKED_R

Bit 16 - Indicates If LEUART1 Powered Down During EM23

pub fn lcdlocked(&self) -> LCDLOCKED_R

Bit 17 - Indicates If LCD Powered Down During EM23

pub fn letimer1locked(&self) -> LETIMER1LOCKED_R

Bit 18 - Indicates If LETIMER1 Powered Down During EM23

pub fn i2c2locked(&self) -> I2C2LOCKED_R

Bit 19 - Indicates If I2C2 Powered Down During EM23

pub fn adc1locked(&self) -> ADC1LOCKED_R

Bit 20 - Indicates If ADC1 Powered Down During EM23

pub fn acmp2locked(&self) -> ACMP2LOCKED_R

Bit 21 - Indicates If ACMP2 Powered Down During EM23

pub fn acmp3locked(&self) -> ACMP3LOCKED_R

Bit 22 - Indicates If ACMP3 Powered Down During EM23

pub fn rtclocked(&self) -> RTCLOCKED_R

Bit 23 - Indicates If RTC Powered Down During EM23

pub fn usblocked(&self) -> USBLOCKED_R

Bit 24 - Indicates If USB Powered Down During EM23

impl R<u32, Reg<u32, _EM23PERNORETAINCTRL>>

pub fn acmp0dis(&self) -> ACMP0DIS_R

Bit 0 - Allow Power Down of ACMP0 During EM23

pub fn acmp1dis(&self) -> ACMP1DIS_R

Bit 1 - Allow Power Down of ACMP1 During EM23

pub fn pcnt0dis(&self) -> PCNT0DIS_R

Bit 2 - Allow Power Down of PCNT0 During EM23

pub fn pcnt1dis(&self) -> PCNT1DIS_R

Bit 3 - Allow Power Down of PCNT1 During EM23

pub fn pcnt2dis(&self) -> PCNT2DIS_R

Bit 4 - Allow Power Down of PCNT2 During EM23

pub fn i2c0dis(&self) -> I2C0DIS_R

Bit 5 - Allow Power Down of I2C0 During EM23

pub fn i2c1dis(&self) -> I2C1DIS_R

Bit 6 - Allow Power Down of I2C1 During EM23

pub fn vdac0dis(&self) -> VDAC0DIS_R

Bit 7 - Allow Power Down of DAC0 During EM23

pub fn idac0dis(&self) -> IDAC0DIS_R

Bit 8 - Allow Power Down of IDAC0 During EM23

pub fn adc0dis(&self) -> ADC0DIS_R

Bit 9 - Allow Power Down of ADC0 During EM23

pub fn letimer0dis(&self) -> LETIMER0DIS_R

Bit 10 - Allow Power Down of LETIMER0 During EM23

pub fn wdog0dis(&self) -> WDOG0DIS_R

Bit 11 - Allow Power Down of WDOG0 During EM23

pub fn wdog1dis(&self) -> WDOG1DIS_R

Bit 12 - Allow Power Down of WDOG1 During EM23

pub fn lesense0dis(&self) -> LESENSE0DIS_R

Bit 13 - Allow Power Down of LESENSE0 During EM23

pub fn csendis(&self) -> CSENDIS_R

Bit 14 - Allow Power Down of CSEN During EM23

pub fn leuart0dis(&self) -> LEUART0DIS_R

Bit 15 - Allow Power Down of LEUART0 During EM23

pub fn leuart1dis(&self) -> LEUART1DIS_R

Bit 16 - Allow Power Down of LEUART1 During EM23

pub fn lcddis(&self) -> LCDDIS_R

Bit 17 - Allow Power Down of LCD During EM23

pub fn letimer1dis(&self) -> LETIMER1DIS_R

Bit 18 - Allow Power Down of LETIMER1 During EM23

pub fn i2c2dis(&self) -> I2C2DIS_R

Bit 19 - Allow Power Down of I2C2 During EM23

pub fn adc1dis(&self) -> ADC1DIS_R

Bit 20 - Allow Power Down of ADC1 During EM23

pub fn acmp2dis(&self) -> ACMP2DIS_R

Bit 21 - Allow Power Down of ACMP2 During EM23

pub fn acmp3dis(&self) -> ACMP3DIS_R

Bit 22 - Allow Power Down of ACMP3 During EM23

pub fn rtcdis(&self) -> RTCDIS_R

Bit 23 - Allow Power Down of RTC During EM23

pub fn usbdis(&self) -> USBDIS_R

Bit 24 - Allow Power Down of USB During EM23

impl R<u8, WDOGRMODE_A>

pub fn variant(&self) -> Variant<u8, WDOGRMODE_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_limited(&self) -> bool

Checks if the value of the field is LIMITED

pub fn is_extended(&self) -> bool

Checks if the value of the field is EXTENDED

pub fn is_full(&self) -> bool

Checks if the value of the field is FULL

impl R<u8, LOCKUPRMODE_A>

pub fn variant(&self) -> Variant<u8, LOCKUPRMODE_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_limited(&self) -> bool

Checks if the value of the field is LIMITED

pub fn is_extended(&self) -> bool

Checks if the value of the field is EXTENDED

pub fn is_full(&self) -> bool

Checks if the value of the field is FULL

impl R<u8, SYSRMODE_A>

pub fn variant(&self) -> Variant<u8, SYSRMODE_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_limited(&self) -> bool

Checks if the value of the field is LIMITED

pub fn is_extended(&self) -> bool

Checks if the value of the field is EXTENDED

pub fn is_full(&self) -> bool

Checks if the value of the field is FULL

impl R<u8, PINRMODE_A>

pub fn variant(&self) -> Variant<u8, PINRMODE_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_limited(&self) -> bool

Checks if the value of the field is LIMITED

pub fn is_extended(&self) -> bool

Checks if the value of the field is EXTENDED

pub fn is_full(&self) -> bool

Checks if the value of the field is FULL

impl R<u32, Reg<u32, _CTRL>>

pub fn wdogrmode(&self) -> WDOGRMODE_R

Bits 0:2 - WDOG Reset Mode

pub fn lockuprmode(&self) -> LOCKUPRMODE_R

Bits 4:6 - Core LOCKUP Reset Mode

pub fn sysrmode(&self) -> SYSRMODE_R

Bits 8:10 - Core Sysreset Reset Mode

pub fn pinrmode(&self) -> PINRMODE_R

Bits 12:14 - PIN Reset Mode

pub fn resetstate(&self) -> RESETSTATE_R

Bits 24:25 - System Software Reset State

impl R<u32, Reg<u32, _RSTCAUSE>>

pub fn porst(&self) -> PORST_R

Bit 0 - Power on Reset

pub fn avddbod(&self) -> AVDDBOD_R

Bit 2 - Brown Out Detector AVDD Reset

pub fn dvddbod(&self) -> DVDDBOD_R

Bit 3 - Brown Out Detector DVDD Reset

pub fn decbod(&self) -> DECBOD_R

Bit 4 - Brown Out Detector Decouple Domain Reset

pub fn extrst(&self) -> EXTRST_R

Bit 8 - External Pin Reset

pub fn lockuprst(&self) -> LOCKUPRST_R

Bit 9 - LOCKUP Reset

pub fn sysreqrst(&self) -> SYSREQRST_R

Bit 10 - System Request Reset

pub fn wdogrst(&self) -> WDOGRST_R

Bit 11 - Watchdog Reset

pub fn bumoderst(&self) -> BUMODERST_R

Bit 12 - Backup Mode Reset

pub fn em4rst(&self) -> EM4RST_R

Bit 16 - EM4 Reset

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - Configuration Lock Key

impl R<u8, CLKOUTSEL0_A>

pub fn variant(&self) -> Variant<u8, CLKOUTSEL0_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_ulfrco(&self) -> bool

Checks if the value of the field is ULFRCO

pub fn is_lfrco(&self) -> bool

Checks if the value of the field is LFRCO

pub fn is_lfxo(&self) -> bool

Checks if the value of the field is LFXO

pub fn is_hfxo(&self) -> bool

Checks if the value of the field is HFXO

pub fn is_hfexpclk(&self) -> bool

Checks if the value of the field is HFEXPCLK

pub fn is_ulfrcoq(&self) -> bool

Checks if the value of the field is ULFRCOQ

pub fn is_lfrcoq(&self) -> bool

Checks if the value of the field is LFRCOQ

pub fn is_lfxoq(&self) -> bool

Checks if the value of the field is LFXOQ

pub fn is_hfrcoq(&self) -> bool

Checks if the value of the field is HFRCOQ

pub fn is_auxhfrcoq(&self) -> bool

Checks if the value of the field is AUXHFRCOQ

pub fn is_hfxoq(&self) -> bool

Checks if the value of the field is HFXOQ

pub fn is_hfsrcclk(&self) -> bool

Checks if the value of the field is HFSRCCLK

pub fn is_ushfrcoq(&self) -> bool

Checks if the value of the field is USHFRCOQ

impl R<u8, CLKOUTSEL1_A>

pub fn variant(&self) -> Variant<u8, CLKOUTSEL1_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_ulfrco(&self) -> bool

Checks if the value of the field is ULFRCO

pub fn is_lfrco(&self) -> bool

Checks if the value of the field is LFRCO

pub fn is_lfxo(&self) -> bool

Checks if the value of the field is LFXO

pub fn is_hfxo(&self) -> bool

Checks if the value of the field is HFXO

pub fn is_hfexpclk(&self) -> bool

Checks if the value of the field is HFEXPCLK

pub fn is_ulfrcoq(&self) -> bool

Checks if the value of the field is ULFRCOQ

pub fn is_lfrcoq(&self) -> bool

Checks if the value of the field is LFRCOQ

pub fn is_lfxoq(&self) -> bool

Checks if the value of the field is LFXOQ

pub fn is_hfrcoq(&self) -> bool

Checks if the value of the field is HFRCOQ

pub fn is_auxhfrcoq(&self) -> bool

Checks if the value of the field is AUXHFRCOQ

pub fn is_hfxoq(&self) -> bool

Checks if the value of the field is HFXOQ

pub fn is_hfsrcclk(&self) -> bool

Checks if the value of the field is HFSRCCLK

pub fn is_ushfrcoq(&self) -> bool

Checks if the value of the field is USHFRCOQ

impl R<u8, CLKOUTSEL2_A>

pub fn variant(&self) -> Variant<u8, CLKOUTSEL2_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_ulfrco(&self) -> bool

Checks if the value of the field is ULFRCO

pub fn is_lfrco(&self) -> bool

Checks if the value of the field is LFRCO

pub fn is_lfxo(&self) -> bool

Checks if the value of the field is LFXO

pub fn is_hfxodiv2q(&self) -> bool

Checks if the value of the field is HFXODIV2Q

pub fn is_hfxo(&self) -> bool

Checks if the value of the field is HFXO

pub fn is_hfexpclk(&self) -> bool

Checks if the value of the field is HFEXPCLK

pub fn is_hfxox2q(&self) -> bool

Checks if the value of the field is HFXOX2Q

pub fn is_ulfrcoq(&self) -> bool

Checks if the value of the field is ULFRCOQ

pub fn is_lfrcoq(&self) -> bool

Checks if the value of the field is LFRCOQ

pub fn is_lfxoq(&self) -> bool

Checks if the value of the field is LFXOQ

pub fn is_hfrcoq(&self) -> bool

Checks if the value of the field is HFRCOQ

pub fn is_auxhfrcoq(&self) -> bool

Checks if the value of the field is AUXHFRCOQ

pub fn is_hfxoq(&self) -> bool

Checks if the value of the field is HFXOQ

pub fn is_hfsrcclk(&self) -> bool

Checks if the value of the field is HFSRCCLK

pub fn is_ushfrcoq(&self) -> bool

Checks if the value of the field is USHFRCOQ

impl R<u32, Reg<u32, _CTRL>>

pub fn clkoutsel0(&self) -> CLKOUTSEL0_R

Bits 0:4 - Clock Output Select 0

pub fn clkoutsel1(&self) -> CLKOUTSEL1_R

Bits 5:9 - Clock Output Select 1

pub fn clkoutsel2(&self) -> CLKOUTSEL2_R

Bits 10:14 - Clock Output Select 2

pub fn wshfle(&self) -> WSHFLE_R

Bit 16 - Wait State for High-Frequency LE Interface

pub fn hfperclken(&self) -> HFPERCLKEN_R

Bit 20 - HFPERCLK Enable

impl R<u8, CLKDIV_A>

pub fn variant(&self) -> Variant<u8, CLKDIV_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

impl R<u32, Reg<u32, _USHFRCOCTRL>>

pub fn tuning(&self) -> TUNING_R

Bits 0:6 - USHFRCO Tuning Value

pub fn finetuning(&self) -> FINETUNING_R

Bits 8:13 - USHFRCO Fine Tuning Value

pub fn freqrange(&self) -> FREQRANGE_R

Bits 16:20 - USHFRCO Frequency Range

pub fn cmpbias(&self) -> CMPBIAS_R

Bits 21:23 - USHFRCO Comparator Bias Current

pub fn ldohp(&self) -> LDOHP_R

Bit 24 - USHFRCO LDO High Power Mode

pub fn clkdiv(&self) -> CLKDIV_R

Bits 25:26 - Locally Divide USHFRCO Clock Output

pub fn finetuningen(&self) -> FINETUNINGEN_R

Bit 27 - Enable Reference for Fine Tuning

pub fn vreftc(&self) -> VREFTC_R

Bits 28:31 - USHFRCO Temperature Coefficient Trim on Comparator Reference

impl R<u8, CLKDIV_A>

pub fn variant(&self) -> Variant<u8, CLKDIV_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

impl R<u32, Reg<u32, _HFRCOCTRL>>

pub fn tuning(&self) -> TUNING_R

Bits 0:6 - HFRCO Tuning Value

pub fn finetuning(&self) -> FINETUNING_R

Bits 8:13 - HFRCO Fine Tuning Value

pub fn freqrange(&self) -> FREQRANGE_R

Bits 16:20 - HFRCO Frequency Range

pub fn cmpbias(&self) -> CMPBIAS_R

Bits 21:23 - HFRCO Comparator Bias Current

pub fn ldohp(&self) -> LDOHP_R

Bit 24 - HFRCO LDO High Power Mode

pub fn clkdiv(&self) -> CLKDIV_R

Bits 25:26 - Locally Divide HFRCO Clock Output

pub fn finetuningen(&self) -> FINETUNINGEN_R

Bit 27 - Enable Reference for Fine Tuning

pub fn vreftc(&self) -> VREFTC_R

Bits 28:31 - HFRCO Temperature Coefficient Trim on Comparator Reference

impl R<u8, CLKDIV_A>

pub fn variant(&self) -> Variant<u8, CLKDIV_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

impl R<u32, Reg<u32, _AUXHFRCOCTRL>>

pub fn tuning(&self) -> TUNING_R

Bits 0:6 - AUXHFRCO Tuning Value

pub fn finetuning(&self) -> FINETUNING_R

Bits 8:13 - AUXHFRCO Fine Tuning Value

pub fn freqrange(&self) -> FREQRANGE_R

Bits 16:20 - AUXHFRCO Frequency Range

pub fn cmpbias(&self) -> CMPBIAS_R

Bits 21:23 - AUXHFRCO Comparator Bias Current

pub fn ldohp(&self) -> LDOHP_R

Bit 24 - AUXHFRCO LDO High Power Mode

pub fn clkdiv(&self) -> CLKDIV_R

Bits 25:26 - Locally Divide AUXHFRCO Clock Output

pub fn finetuningen(&self) -> FINETUNINGEN_R

Bit 27 - Enable Reference for Fine Tuning

pub fn vreftc(&self) -> VREFTC_R

Bits 28:31 - AUXHFRCO Temperature Coefficient Trim on Comparator Reference

impl R<u8, VREFUPDATE_A>

pub fn variant(&self) -> VREFUPDATE_A

Get enumerated values variant

pub fn is_32cycles(&self) -> bool

Checks if the value of the field is _32CYCLES

pub fn is_64cycles(&self) -> bool

Checks if the value of the field is _64CYCLES

pub fn is_128cycles(&self) -> bool

Checks if the value of the field is _128CYCLES

pub fn is_256cycles(&self) -> bool

Checks if the value of the field is _256CYCLES

impl R<u8, TIMEOUT_A>

pub fn variant(&self) -> Variant<u8, TIMEOUT_A>

Get enumerated values variant

pub fn is_2cycles(&self) -> bool

Checks if the value of the field is _2CYCLES

pub fn is_16cycles(&self) -> bool

Checks if the value of the field is _16CYCLES

pub fn is_32cycles(&self) -> bool

Checks if the value of the field is _32CYCLES

impl R<u32, Reg<u32, _LFRCOCTRL>>

pub fn tuning(&self) -> TUNING_R

Bits 0:8 - LFRCO Tuning Value

pub fn envref(&self) -> ENVREF_R

Bit 16 - Enable Duty Cycling of Vref

pub fn enchop(&self) -> ENCHOP_R

Bit 17 - Enable Comparator Chopping

pub fn endem(&self) -> ENDEM_R

Bit 18 - Enable Dynamic Element Matching

pub fn vrefupdate(&self) -> VREFUPDATE_R

Bits 20:21 - Control Vref Update Rate

pub fn timeout(&self) -> TIMEOUT_R

Bits 24:25 - LFRCO Timeout

pub fn gmccurtune(&self) -> GMCCURTUNE_R

Bits 28:31 - Tuning of Gmc Current

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_xtal(&self) -> bool

Checks if the value of the field is XTAL

pub fn is_acbufextclk(&self) -> bool

Checks if the value of the field is ACBUFEXTCLK

pub fn is_dcbufextclk(&self) -> bool

Checks if the value of the field is DCBUFEXTCLK

pub fn is_digextclk(&self) -> bool

Checks if the value of the field is DIGEXTCLK

impl R<u8, PEAKDETMODE_A>

pub fn variant(&self) -> PEAKDETMODE_A

Get enumerated values variant

pub fn is_oncecmd(&self) -> bool

Checks if the value of the field is ONCECMD

pub fn is_autocmd(&self) -> bool

Checks if the value of the field is AUTOCMD

pub fn is_cmd(&self) -> bool

Checks if the value of the field is CMD

pub fn is_manual(&self) -> bool

Checks if the value of the field is MANUAL

impl R<u8, LFTIMEOUT_A>

pub fn variant(&self) -> LFTIMEOUT_A

Get enumerated values variant

pub fn is_0cycles(&self) -> bool

Checks if the value of the field is _0CYCLES

pub fn is_2cycles(&self) -> bool

Checks if the value of the field is _2CYCLES

pub fn is_4cycles(&self) -> bool

Checks if the value of the field is _4CYCLES

pub fn is_16cycles(&self) -> bool

Checks if the value of the field is _16CYCLES

pub fn is_32cycles(&self) -> bool

Checks if the value of the field is _32CYCLES

pub fn is_64cycles(&self) -> bool

Checks if the value of the field is _64CYCLES

pub fn is_1kcycles(&self) -> bool

Checks if the value of the field is _1KCYCLES

pub fn is_4kcycles(&self) -> bool

Checks if the value of the field is _4KCYCLES

impl R<u32, Reg<u32, _HFXOCTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - HFXO Mode

pub fn hfxox2en(&self) -> HFXOX2EN_R

Bit 3 - Enable Double Frequency on HFXOX2 Clock (compared to HFXO Clock)

pub fn peakdetmode(&self) -> PEAKDETMODE_R

Bits 4:5 - HFXO Automatic Peak Detection Mode

pub fn lftimeout(&self) -> LFTIMEOUT_R

Bits 24:26 - HFXO Low Frequency Timeout

pub fn autostartem0em1(&self) -> AUTOSTARTEM0EM1_R

Bit 28 - Automatically Start of HFXO Upon EM0/EM1 Entry From EM2/EM3

pub fn autostartselem0em1(&self) -> AUTOSTARTSELEM0EM1_R

Bit 29 - Automatically Start and Select of HFXO Upon EM0/EM1 Entry From EM2/EM3

impl R<u8, PEAKDETTHR_A>

pub fn variant(&self) -> PEAKDETTHR_A

Get enumerated values variant

pub fn is_thr0(&self) -> bool

Checks if the value of the field is THR0

pub fn is_thr1(&self) -> bool

Checks if the value of the field is THR1

pub fn is_thr2(&self) -> bool

Checks if the value of the field is THR2

pub fn is_thr3(&self) -> bool

Checks if the value of the field is THR3

pub fn is_thr4(&self) -> bool

Checks if the value of the field is THR4

pub fn is_thr5(&self) -> bool

Checks if the value of the field is THR5

pub fn is_thr6(&self) -> bool

Checks if the value of the field is THR6

pub fn is_thr7(&self) -> bool

Checks if the value of the field is THR7

impl R<u32, Reg<u32, _HFXOCTRL1>>

pub fn peakdetthr(&self) -> PEAKDETTHR_R

Bits 12:14 - Sets the Amplitude Detection Level (mV)

impl R<u32, Reg<u32, _HFXOSTARTUPCTRL>>

pub fn ibtrimxocore(&self) -> IBTRIMXOCORE_R

Bits 0:10 - Sets the Startup Oscillator Core Bias Current

pub fn ctune(&self) -> CTUNE_R

Bits 11:19 - Sets Oscillator Tuning Capacitance

impl R<u32, Reg<u32, _HFXOSTEADYSTATECTRL>>

pub fn ibtrimxocore(&self) -> IBTRIMXOCORE_R

Bits 0:10 - Sets the Steady State Oscillator Core Bias Current.

pub fn ctune(&self) -> CTUNE_R

Bits 11:19 - Sets Oscillator Tuning Capacitance

pub fn peakdeten(&self) -> PEAKDETEN_R

Bit 26 - Enables Oscillator Peak Detectors

pub fn peakmonen(&self) -> PEAKMONEN_R

Bit 27 - Automatically Perform Peak Monitoring Algorithm on Every Rising Edge of ULFRCO

impl R<u8, STARTUPTIMEOUT_A>

pub fn variant(&self) -> Variant<u8, STARTUPTIMEOUT_A>

Get enumerated values variant

pub fn is_2cycles(&self) -> bool

Checks if the value of the field is _2CYCLES

pub fn is_4cycles(&self) -> bool

Checks if the value of the field is _4CYCLES

pub fn is_16cycles(&self) -> bool

Checks if the value of the field is _16CYCLES

pub fn is_32cycles(&self) -> bool

Checks if the value of the field is _32CYCLES

pub fn is_64cycles(&self) -> bool

Checks if the value of the field is _64CYCLES

pub fn is_128cycles(&self) -> bool

Checks if the value of the field is _128CYCLES

pub fn is_256cycles(&self) -> bool

Checks if the value of the field is _256CYCLES

pub fn is_1kcycles(&self) -> bool

Checks if the value of the field is _1KCYCLES

pub fn is_2kcycles(&self) -> bool

Checks if the value of the field is _2KCYCLES

pub fn is_4kcycles(&self) -> bool

Checks if the value of the field is _4KCYCLES

pub fn is_8kcycles(&self) -> bool

Checks if the value of the field is _8KCYCLES

pub fn is_16kcycles(&self) -> bool

Checks if the value of the field is _16KCYCLES

pub fn is_32kcycles(&self) -> bool

Checks if the value of the field is _32KCYCLES

pub fn is_64kcycles(&self) -> bool

Checks if the value of the field is _64KCYCLES

pub fn is_128kcycles(&self) -> bool

Checks if the value of the field is _128KCYCLES

impl R<u8, STEADYTIMEOUT_A>

pub fn variant(&self) -> Variant<u8, STEADYTIMEOUT_A>

Get enumerated values variant

pub fn is_2cycles(&self) -> bool

Checks if the value of the field is _2CYCLES

pub fn is_4cycles(&self) -> bool

Checks if the value of the field is _4CYCLES

pub fn is_16cycles(&self) -> bool

Checks if the value of the field is _16CYCLES

pub fn is_32cycles(&self) -> bool

Checks if the value of the field is _32CYCLES

pub fn is_64cycles(&self) -> bool

Checks if the value of the field is _64CYCLES

pub fn is_128cycles(&self) -> bool

Checks if the value of the field is _128CYCLES

pub fn is_256cycles(&self) -> bool

Checks if the value of the field is _256CYCLES

pub fn is_1kcycles(&self) -> bool

Checks if the value of the field is _1KCYCLES

pub fn is_2kcycles(&self) -> bool

Checks if the value of the field is _2KCYCLES

pub fn is_4kcycles(&self) -> bool

Checks if the value of the field is _4KCYCLES

pub fn is_8kcycles(&self) -> bool

Checks if the value of the field is _8KCYCLES

pub fn is_16kcycles(&self) -> bool

Checks if the value of the field is _16KCYCLES

pub fn is_32kcycles(&self) -> bool

Checks if the value of the field is _32KCYCLES

pub fn is_64kcycles(&self) -> bool

Checks if the value of the field is _64KCYCLES

pub fn is_128kcycles(&self) -> bool

Checks if the value of the field is _128KCYCLES

impl R<u8, PEAKDETTIMEOUT_A>

pub fn variant(&self) -> Variant<u8, PEAKDETTIMEOUT_A>

Get enumerated values variant

pub fn is_2cycles(&self) -> bool

Checks if the value of the field is _2CYCLES

pub fn is_4cycles(&self) -> bool

Checks if the value of the field is _4CYCLES

pub fn is_16cycles(&self) -> bool

Checks if the value of the field is _16CYCLES

pub fn is_32cycles(&self) -> bool

Checks if the value of the field is _32CYCLES

pub fn is_64cycles(&self) -> bool

Checks if the value of the field is _64CYCLES

pub fn is_128cycles(&self) -> bool

Checks if the value of the field is _128CYCLES

pub fn is_256cycles(&self) -> bool

Checks if the value of the field is _256CYCLES

pub fn is_1kcycles(&self) -> bool

Checks if the value of the field is _1KCYCLES

pub fn is_2kcycles(&self) -> bool

Checks if the value of the field is _2KCYCLES

pub fn is_4kcycles(&self) -> bool

Checks if the value of the field is _4KCYCLES

pub fn is_8kcycles(&self) -> bool

Checks if the value of the field is _8KCYCLES

pub fn is_16kcycles(&self) -> bool

Checks if the value of the field is _16KCYCLES

pub fn is_32kcycles(&self) -> bool

Checks if the value of the field is _32KCYCLES

pub fn is_64kcycles(&self) -> bool

Checks if the value of the field is _64KCYCLES

pub fn is_128kcycles(&self) -> bool

Checks if the value of the field is _128KCYCLES

impl R<u32, Reg<u32, _HFXOTIMEOUTCTRL>>

pub fn startuptimeout(&self) -> STARTUPTIMEOUT_R

Bits 0:3 - Wait Duration in HFXO Startup Enable Wait State

pub fn steadytimeout(&self) -> STEADYTIMEOUT_R

Bits 4:7 - Wait Duration in HFXO Startup Steady Wait State

pub fn peakdettimeout(&self) -> PEAKDETTIMEOUT_R

Bits 12:15 - Wait Duration in HFXO Peak Detection Wait State

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_xtal(&self) -> bool

Checks if the value of the field is XTAL

pub fn is_bufextclk(&self) -> bool

Checks if the value of the field is BUFEXTCLK

pub fn is_digextclk(&self) -> bool

Checks if the value of the field is DIGEXTCLK

impl R<u8, TIMEOUT_A>

pub fn variant(&self) -> TIMEOUT_A

Get enumerated values variant

pub fn is_2cycles(&self) -> bool

Checks if the value of the field is _2CYCLES

pub fn is_256cycles(&self) -> bool

Checks if the value of the field is _256CYCLES

pub fn is_1kcycles(&self) -> bool

Checks if the value of the field is _1KCYCLES

pub fn is_2kcycles(&self) -> bool

Checks if the value of the field is _2KCYCLES

pub fn is_4kcycles(&self) -> bool

Checks if the value of the field is _4KCYCLES

pub fn is_8kcycles(&self) -> bool

Checks if the value of the field is _8KCYCLES

pub fn is_16kcycles(&self) -> bool

Checks if the value of the field is _16KCYCLES

pub fn is_32kcycles(&self) -> bool

Checks if the value of the field is _32KCYCLES

impl R<u32, Reg<u32, _LFXOCTRL>>

pub fn tuning(&self) -> TUNING_R

Bits 0:6 - LFXO Internal Capacitor Array Tuning Value

pub fn mode(&self) -> MODE_R

Bits 8:9 - LFXO Mode

pub fn gain(&self) -> GAIN_R

Bits 11:12 - LFXO Startup Gain

pub fn highampl(&self) -> HIGHAMPL_R

Bit 14 - LFXO High XTAL Oscillation Amplitude Enable

pub fn agc(&self) -> AGC_R

Bit 15 - LFXO AGC Enable

pub fn cur(&self) -> CUR_R

Bits 16:17 - LFXO Current Trim

pub fn bufcur(&self) -> BUFCUR_R

Bit 20 - LFXO Buffer Bias Current

pub fn timeout(&self) -> TIMEOUT_R

Bits 24:26 - LFXO Timeout

impl R<u8, REFSEL_A>

pub fn variant(&self) -> REFSEL_A

Get enumerated values variant

pub fn is_hfxo(&self) -> bool

Checks if the value of the field is HFXO

pub fn is_lfxo(&self) -> bool

Checks if the value of the field is LFXO

pub fn is_ushfrco(&self) -> bool

Checks if the value of the field is USHFRCO

pub fn is_clkin0(&self) -> bool

Checks if the value of the field is CLKIN0

impl R<u32, Reg<u32, _DPLLCTRL>>

pub fn mode(&self) -> MODE_R

Bit 0 - Operating Mode Control

pub fn edgesel(&self) -> EDGESEL_R

Bit 1 - Reference Edge Select

pub fn autorecover(&self) -> AUTORECOVER_R

Bit 2 - Automatic Recovery Ctrl

pub fn refsel(&self) -> REFSEL_R

Bits 3:4 - Reference Clock Selection Control

pub fn dithen(&self) -> DITHEN_R

Bit 6 - Dither Enable Control

impl R<u32, Reg<u32, _DPLLCTRL1>>

pub fn m(&self) -> M_R

Bits 0:11 - Factor M

pub fn n(&self) -> N_R

Bits 16:27 - Factor N

impl R<u8, UPSEL_A>

pub fn variant(&self) -> Variant<u8, UPSEL_A>

Get enumerated values variant

pub fn is_hfxo(&self) -> bool

Checks if the value of the field is HFXO

pub fn is_lfxo(&self) -> bool

Checks if the value of the field is LFXO

pub fn is_hfrco(&self) -> bool

Checks if the value of the field is HFRCO

pub fn is_lfrco(&self) -> bool

Checks if the value of the field is LFRCO

pub fn is_auxhfrco(&self) -> bool

Checks if the value of the field is AUXHFRCO

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_ushfrco(&self) -> bool

Checks if the value of the field is USHFRCO

impl R<u8, DOWNSEL_A>

pub fn variant(&self) -> Variant<u8, DOWNSEL_A>

Get enumerated values variant

pub fn is_hfclk(&self) -> bool

Checks if the value of the field is HFCLK

pub fn is_hfxo(&self) -> bool

Checks if the value of the field is HFXO

pub fn is_lfxo(&self) -> bool

Checks if the value of the field is LFXO

pub fn is_hfrco(&self) -> bool

Checks if the value of the field is HFRCO

pub fn is_lfrco(&self) -> bool

Checks if the value of the field is LFRCO

pub fn is_auxhfrco(&self) -> bool

Checks if the value of the field is AUXHFRCO

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_ushfrco(&self) -> bool

Checks if the value of the field is USHFRCO

impl R<u8, PRSUPSEL_A>

pub fn variant(&self) -> Variant<u8, PRSUPSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, PRSDOWNSEL_A>

pub fn variant(&self) -> Variant<u8, PRSDOWNSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _CALCTRL>>

pub fn upsel(&self) -> UPSEL_R

Bits 0:2 - Calibration Up-counter Select

pub fn downsel(&self) -> DOWNSEL_R

Bits 4:7 - Calibration Down-counter Select

pub fn cont(&self) -> CONT_R

Bit 8 - Continuous Calibration

pub fn prsupsel(&self) -> PRSUPSEL_R

Bits 16:20 - PRS Select for PRS Input When Selected in UPSEL

pub fn prsdownsel(&self) -> PRSDOWNSEL_R

Bits 24:28 - PRS Select for PRS Input When Selected in DOWNSEL

impl R<u32, Reg<u32, _CALCNT>>

pub fn calcnt(&self) -> CALCNT_R

Bits 0:19 - Calibration Counter

impl R<u8, DBG_A>

pub fn variant(&self) -> Variant<u8, DBG_A>

Get enumerated values variant

pub fn is_auxhfrco(&self) -> bool

Checks if the value of the field is AUXHFRCO

pub fn is_hfclk(&self) -> bool

Checks if the value of the field is HFCLK

pub fn is_hfrcodiv2(&self) -> bool

Checks if the value of the field is HFRCODIV2

impl R<u32, Reg<u32, _DBGCLKSEL>>

pub fn dbg(&self) -> DBG_R

Bits 0:1 - Debug Trace Clock

impl R<u8, LFA_A>

pub fn variant(&self) -> Variant<u8, LFA_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_lfrco(&self) -> bool

Checks if the value of the field is LFRCO

pub fn is_lfxo(&self) -> bool

Checks if the value of the field is LFXO

pub fn is_ulfrco(&self) -> bool

Checks if the value of the field is ULFRCO

impl R<u32, Reg<u32, _LFACLKSEL>>

pub fn lfa(&self) -> LFA_R

Bits 0:2 - Clock Select for LFA

impl R<u8, LFB_A>

pub fn variant(&self) -> Variant<u8, LFB_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_lfrco(&self) -> bool

Checks if the value of the field is LFRCO

pub fn is_lfxo(&self) -> bool

Checks if the value of the field is LFXO

pub fn is_hfclkle(&self) -> bool

Checks if the value of the field is HFCLKLE

pub fn is_ulfrco(&self) -> bool

Checks if the value of the field is ULFRCO

impl R<u32, Reg<u32, _LFBCLKSEL>>

pub fn lfb(&self) -> LFB_R

Bits 0:2 - Clock Select for LFB

impl R<u8, LFE_A>

pub fn variant(&self) -> Variant<u8, LFE_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_lfrco(&self) -> bool

Checks if the value of the field is LFRCO

pub fn is_lfxo(&self) -> bool

Checks if the value of the field is LFXO

pub fn is_ulfrco(&self) -> bool

Checks if the value of the field is ULFRCO

impl R<u32, Reg<u32, _LFECLKSEL>>

pub fn lfe(&self) -> LFE_R

Bits 0:2 - Clock Select for LFE

impl R<u8, LFC_A>

pub fn variant(&self) -> Variant<u8, LFC_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_lfrco(&self) -> bool

Checks if the value of the field is LFRCO

pub fn is_lfxo(&self) -> bool

Checks if the value of the field is LFXO

pub fn is_ulfrco(&self) -> bool

Checks if the value of the field is ULFRCO

impl R<u32, Reg<u32, _LFCCLKSEL>>

pub fn lfc(&self) -> LFC_R

Bits 0:2 - Clock Select for LFC

impl R<u32, Reg<u32, _STATUS>>

pub fn hfrcoens(&self) -> HFRCOENS_R

Bit 0 - HFRCO Enable Status

pub fn hfrcordy(&self) -> HFRCORDY_R

Bit 1 - HFRCO Ready

pub fn hfxoens(&self) -> HFXOENS_R

Bit 2 - HFXO Enable Status

pub fn hfxordy(&self) -> HFXORDY_R

Bit 3 - HFXO Ready

pub fn auxhfrcoens(&self) -> AUXHFRCOENS_R

Bit 4 - AUXHFRCO Enable Status

pub fn auxhfrcordy(&self) -> AUXHFRCORDY_R

Bit 5 - AUXHFRCO Ready

pub fn lfrcoens(&self) -> LFRCOENS_R

Bit 6 - LFRCO Enable Status

pub fn lfrcordy(&self) -> LFRCORDY_R

Bit 7 - LFRCO Ready

pub fn lfxoens(&self) -> LFXOENS_R

Bit 8 - LFXO Enable Status

pub fn lfxordy(&self) -> LFXORDY_R

Bit 9 - LFXO Ready

pub fn ushfrcoens(&self) -> USHFRCOENS_R

Bit 10 - USHFRCO Enable Status

pub fn ushfrcordy(&self) -> USHFRCORDY_R

Bit 11 - USHFRCO Ready

pub fn dpllens(&self) -> DPLLENS_R

Bit 12 - DPLL Enable Status

pub fn dpllrdy(&self) -> DPLLRDY_R

Bit 13 - DPLL Ready

pub fn calrdy(&self) -> CALRDY_R

Bit 16 - Calibration Ready

pub fn sdioclkens(&self) -> SDIOCLKENS_R

Bit 17 - SDIO Clock Enabled Status

pub fn qspi0clkens(&self) -> QSPI0CLKENS_R

Bit 18 - QSPI0 Clock Enabled Status

pub fn hfxopeakdetrdy(&self) -> HFXOPEAKDETRDY_R

Bit 22 - HFXO Peak Detection Ready

pub fn hfxoamplow(&self) -> HFXOAMPLOW_R

Bit 25 - HFXO Amplitude Tuning Value Too Low

pub fn lfxophase(&self) -> LFXOPHASE_R

Bit 27 - LFXO Clock Phase

pub fn lfrcophase(&self) -> LFRCOPHASE_R

Bit 28 - LFRCO Clock Phase

pub fn ulfrcophase(&self) -> ULFRCOPHASE_R

Bit 29 - ULFRCO Clock Phase

impl R<u8, SELECTED_A>

pub fn variant(&self) -> Variant<u8, SELECTED_A>

Get enumerated values variant

pub fn is_hfrco(&self) -> bool

Checks if the value of the field is HFRCO

pub fn is_hfxo(&self) -> bool

Checks if the value of the field is HFXO

pub fn is_lfrco(&self) -> bool

Checks if the value of the field is LFRCO

pub fn is_lfxo(&self) -> bool

Checks if the value of the field is LFXO

pub fn is_hfrcodiv2(&self) -> bool

Checks if the value of the field is HFRCODIV2

pub fn is_ushfrco(&self) -> bool

Checks if the value of the field is USHFRCO

pub fn is_clkin0(&self) -> bool

Checks if the value of the field is CLKIN0

impl R<u32, Reg<u32, _HFCLKSTATUS>>

pub fn selected(&self) -> SELECTED_R

Bits 0:2 - HFCLK Selected

impl R<u32, Reg<u32, _HFXOTRIMSTATUS>>

pub fn ibtrimxocore(&self) -> IBTRIMXOCORE_R

Bits 0:10 - Value of IBTRIMXOCORE Found By Automatic HFXO Peak Detection Algorithm

pub fn ibtrimxocoremon(&self) -> IBTRIMXOCOREMON_R

Bits 16:26 - Value of IBTRIMXOCORE Found By Automatic HFXO Peak Detection Algorithm or Peak Monitoring Algorithm (completion of Either Algorithm Will Cause an Update of IBTRIMXOCOREMON)

pub fn valid(&self) -> VALID_R

Bit 30 - Peak Detection Algorithm Found a Value for IBTRIMXOCORE

pub fn monvalid(&self) -> MONVALID_R

Bit 31 - Peak Detection Algorithm or Peak Monitoring Algorithm Found a Value for IBTRIMXOCOREMON

impl R<u32, Reg<u32, _IF>>

pub fn hfrcordy(&self) -> HFRCORDY_R

Bit 0 - HFRCO Ready Interrupt Flag

pub fn hfxordy(&self) -> HFXORDY_R

Bit 1 - HFXO Ready Interrupt Flag

pub fn lfrcordy(&self) -> LFRCORDY_R

Bit 2 - LFRCO Ready Interrupt Flag

pub fn lfxordy(&self) -> LFXORDY_R

Bit 3 - LFXO Ready Interrupt Flag

pub fn auxhfrcordy(&self) -> AUXHFRCORDY_R

Bit 4 - AUXHFRCO Ready Interrupt Flag

pub fn calrdy(&self) -> CALRDY_R

Bit 5 - Calibration Ready Interrupt Flag

pub fn calof(&self) -> CALOF_R

Bit 6 - Calibration Overflow Interrupt Flag

pub fn ushfrcordy(&self) -> USHFRCORDY_R

Bit 7 - USHFRCO Ready Interrupt Flag

pub fn hfxodiserr(&self) -> HFXODISERR_R

Bit 8 - HFXO Disable Error Interrupt Flag

pub fn hfxoautosw(&self) -> HFXOAUTOSW_R

Bit 9 - HFXO Automatic Switch Interrupt Flag

pub fn hfxopeakdetrdy(&self) -> HFXOPEAKDETRDY_R

Bit 11 - HFXO Automatic Peak Detection Ready Interrupt Flag

pub fn hfrcodis(&self) -> HFRCODIS_R

Bit 13 - HFRCO Disable Interrupt Flag

pub fn lftimeouterr(&self) -> LFTIMEOUTERR_R

Bit 14 - Low Frequency Timeout Error Interrupt Flag

pub fn dpllrdy(&self) -> DPLLRDY_R

Bit 15 - DPLL Lock Interrupt Flag

pub fn dplllockfaillow(&self) -> DPLLLOCKFAILLOW_R

Bit 16 - DPLL Lock Failure Low Interrupt Flag

pub fn dplllockfailhigh(&self) -> DPLLLOCKFAILHIGH_R

Bit 17 - DPLL Lock Failure Low Interrupt Flag

pub fn lfxoedge(&self) -> LFXOEDGE_R

Bit 27 - LFXO Clock Edge Detected Interrupt Flag

pub fn lfrcoedge(&self) -> LFRCOEDGE_R

Bit 28 - LFRCO Clock Edge Detected Interrupt Flag

pub fn ulfrcoedge(&self) -> ULFRCOEDGE_R

Bit 29 - ULFRCO Clock Edge Detected Interrupt Flag

pub fn cmuerr(&self) -> CMUERR_R

Bit 31 - CMU Error Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn hfrcordy(&self) -> HFRCORDY_R

Bit 0 - HFRCORDY Interrupt Enable

pub fn hfxordy(&self) -> HFXORDY_R

Bit 1 - HFXORDY Interrupt Enable

pub fn lfrcordy(&self) -> LFRCORDY_R

Bit 2 - LFRCORDY Interrupt Enable

pub fn lfxordy(&self) -> LFXORDY_R

Bit 3 - LFXORDY Interrupt Enable

pub fn auxhfrcordy(&self) -> AUXHFRCORDY_R

Bit 4 - AUXHFRCORDY Interrupt Enable

pub fn calrdy(&self) -> CALRDY_R

Bit 5 - CALRDY Interrupt Enable

pub fn calof(&self) -> CALOF_R

Bit 6 - CALOF Interrupt Enable

pub fn ushfrcordy(&self) -> USHFRCORDY_R

Bit 7 - USHFRCORDY Interrupt Enable

pub fn hfxodiserr(&self) -> HFXODISERR_R

Bit 8 - HFXODISERR Interrupt Enable

pub fn hfxoautosw(&self) -> HFXOAUTOSW_R

Bit 9 - HFXOAUTOSW Interrupt Enable

pub fn hfxopeakdetrdy(&self) -> HFXOPEAKDETRDY_R

Bit 11 - HFXOPEAKDETRDY Interrupt Enable

pub fn hfrcodis(&self) -> HFRCODIS_R

Bit 13 - HFRCODIS Interrupt Enable

pub fn lftimeouterr(&self) -> LFTIMEOUTERR_R

Bit 14 - LFTIMEOUTERR Interrupt Enable

pub fn dpllrdy(&self) -> DPLLRDY_R

Bit 15 - DPLLRDY Interrupt Enable

pub fn dplllockfaillow(&self) -> DPLLLOCKFAILLOW_R

Bit 16 - DPLLLOCKFAILLOW Interrupt Enable

pub fn dplllockfailhigh(&self) -> DPLLLOCKFAILHIGH_R

Bit 17 - DPLLLOCKFAILHIGH Interrupt Enable

pub fn lfxoedge(&self) -> LFXOEDGE_R

Bit 27 - LFXOEDGE Interrupt Enable

pub fn lfrcoedge(&self) -> LFRCOEDGE_R

Bit 28 - LFRCOEDGE Interrupt Enable

pub fn ulfrcoedge(&self) -> ULFRCOEDGE_R

Bit 29 - ULFRCOEDGE Interrupt Enable

pub fn cmuerr(&self) -> CMUERR_R

Bit 31 - CMUERR Interrupt Enable

impl R<u32, Reg<u32, _HFBUSCLKEN0>>

pub fn le(&self) -> LE_R

Bit 0 - Low Energy Peripheral Interface Clock Enable

pub fn crypto0(&self) -> CRYPTO0_R

Bit 1 - Advanced Encryption Standard Accelerator Clock Enable

pub fn ebi(&self) -> EBI_R

Bit 2 - External Bus Interface Clock Enable

pub fn eth(&self) -> ETH_R

Bit 3 - Ethernet Controller Clock Enable

pub fn sdio(&self) -> SDIO_R

Bit 4 - SDIO Controller Clock Enable

pub fn gpio(&self) -> GPIO_R

Bit 5 - General purpose Input/Output Clock Enable

pub fn prs(&self) -> PRS_R

Bit 6 - Peripheral Reflex System Clock Enable

pub fn ldma(&self) -> LDMA_R

Bit 7 - Linked Direct Memory Access Controller Clock Enable

pub fn gpcrc(&self) -> GPCRC_R

Bit 8 - General Purpose CRC Clock Enable

pub fn qspi0(&self) -> QSPI0_R

Bit 9 - Quad-SPI Clock Enable

pub fn usb(&self) -> USB_R

Bit 10 - Universal Serial Bus Interface Clock Enable

impl R<u32, Reg<u32, _HFPERCLKEN0>>

pub fn timer0(&self) -> TIMER0_R

Bit 0 - Timer 0 Clock Enable

pub fn timer1(&self) -> TIMER1_R

Bit 1 - Timer 1 Clock Enable

pub fn timer2(&self) -> TIMER2_R

Bit 2 - Timer 2 Clock Enable

pub fn timer3(&self) -> TIMER3_R

Bit 3 - Timer 3 Clock Enable

pub fn timer4(&self) -> TIMER4_R

Bit 4 - Timer 4 Clock Enable

pub fn timer5(&self) -> TIMER5_R

Bit 5 - Timer 5 Clock Enable

pub fn timer6(&self) -> TIMER6_R

Bit 6 - Timer 6 Clock Enable

pub fn usart0(&self) -> USART0_R

Bit 7 - Universal Synchronous/Asynchronous Receiver/Transmitter 0 Clock Enable

pub fn usart1(&self) -> USART1_R

Bit 8 - Universal Synchronous/Asynchronous Receiver/Transmitter 1 Clock Enable

pub fn usart2(&self) -> USART2_R

Bit 9 - Universal Synchronous/Asynchronous Receiver/Transmitter 2 Clock Enable

pub fn usart3(&self) -> USART3_R

Bit 10 - Universal Synchronous/Asynchronous Receiver/Transmitter 3 Clock Enable

pub fn usart4(&self) -> USART4_R

Bit 11 - Universal Synchronous/Asynchronous Receiver/Transmitter 4 Clock Enable

pub fn usart5(&self) -> USART5_R

Bit 12 - Universal Synchronous/Asynchronous Receiver/Transmitter 5 Clock Enable

pub fn acmp0(&self) -> ACMP0_R

Bit 13 - Analog Comparator 0 Clock Enable

pub fn acmp1(&self) -> ACMP1_R

Bit 14 - Analog Comparator 1 Clock Enable

pub fn acmp2(&self) -> ACMP2_R

Bit 15 - Analog Comparator 1 Clock Enable

pub fn acmp3(&self) -> ACMP3_R

Bit 16 - Analog Comparator 3 Clock Enable

pub fn i2c0(&self) -> I2C0_R

Bit 17 - I2C 0 Clock Enable

pub fn i2c1(&self) -> I2C1_R

Bit 18 - I2C 1 Clock Enable

pub fn i2c2(&self) -> I2C2_R

Bit 19 - I2C 2 Clock Enable

pub fn adc0(&self) -> ADC0_R

Bit 20 - Analog to Digital Converter 0 Clock Enable

pub fn adc1(&self) -> ADC1_R

Bit 21 - Analog to Digital Converter 0 Clock Enable

pub fn cryotimer(&self) -> CRYOTIMER_R

Bit 22 - CRYOTIMER Clock Enable

pub fn idac0(&self) -> IDAC0_R

Bit 23 - Current Digital to Analog Converter 0 Clock Enable

pub fn trng0(&self) -> TRNG0_R

Bit 24 - True Random Number Generator 0 Clock Enable

impl R<u32, Reg<u32, _HFPERCLKEN1>>

pub fn wtimer0(&self) -> WTIMER0_R

Bit 0 - Wide Timer 0 Clock Enable

pub fn wtimer1(&self) -> WTIMER1_R

Bit 1 - Wide Timer 0 Clock Enable

pub fn wtimer2(&self) -> WTIMER2_R

Bit 2 - Wide Timer 2 Clock Enable

pub fn wtimer3(&self) -> WTIMER3_R

Bit 3 - Wide Timer 3 Clock Enable

pub fn uart0(&self) -> UART0_R

Bit 4 - Universal Asynchronous Receiver/Transmitter 0 Clock Enable

pub fn uart1(&self) -> UART1_R

Bit 5 - Universal Asynchronous Receiver/Transmitter 1 Clock Enable

pub fn can0(&self) -> CAN0_R

Bit 6 - CAN 0 Clock Enable

pub fn can1(&self) -> CAN1_R

Bit 7 - CAN 1 Clock Enable

pub fn vdac0(&self) -> VDAC0_R

Bit 8 - Digital to Analog Converter 0 Clock Enable

pub fn csen(&self) -> CSEN_R

Bit 9 - Capacitive touch sense module Clock Enable

impl R<u32, Reg<u32, _LFACLKEN0>>

pub fn letimer0(&self) -> LETIMER0_R

Bit 0 - Low Energy Timer 0 Clock Enable

pub fn letimer1(&self) -> LETIMER1_R

Bit 1 - Low Energy Timer 1 Clock Enable

pub fn lesense(&self) -> LESENSE_R

Bit 2 - Low Energy Sensor Interface Clock Enable

pub fn lcd(&self) -> LCD_R

Bit 3 - Liquid Crystal Display Controller Clock Enable

pub fn rtc(&self) -> RTC_R

Bit 4 - Real-Time Counter Clock Enable

impl R<u32, Reg<u32, _LFBCLKEN0>>

pub fn leuart0(&self) -> LEUART0_R

Bit 0 - Low Energy UART 0 Clock Enable

pub fn leuart1(&self) -> LEUART1_R

Bit 1 - Low Energy UART 1 Clock Enable

pub fn systick(&self) -> SYSTICK_R

Bit 2 - Clock Enable

pub fn csen(&self) -> CSEN_R

Bit 3 - Capacitive touch sense module Clock Enable

impl R<u32, Reg<u32, _LFCCLKEN0>>

pub fn usb(&self) -> USB_R

Bit 0 - Universal Serial Bus Interface Clock Enable

impl R<u32, Reg<u32, _LFECLKEN0>>

pub fn rtcc(&self) -> RTCC_R

Bit 0 - Real-Time Counter and Calendar Clock Enable

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_nodivision(&self) -> bool

Checks if the value of the field is NODIVISION

impl R<u8, HFCLKLEPRESC_A>

pub fn variant(&self) -> Variant<u8, HFCLKLEPRESC_A>

Get enumerated values variant

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

impl R<u32, Reg<u32, _HFPRESC>>

pub fn presc(&self) -> PRESC_R

Bits 8:12 - HFCLK Prescaler

pub fn hfclklepresc(&self) -> HFCLKLEPRESC_R

Bits 24:25 - HFCLKLE Prescaler

impl R<u16, PRESC_A>

pub fn variant(&self) -> Variant<u16, PRESC_A>

Get enumerated values variant

pub fn is_nodivision(&self) -> bool

Checks if the value of the field is NODIVISION

impl R<u32, Reg<u32, _HFBUSPRESC>>

pub fn presc(&self) -> PRESC_R

Bits 8:16 - HFBUSCLK Prescaler

impl R<u16, PRESC_A>

pub fn variant(&self) -> Variant<u16, PRESC_A>

Get enumerated values variant

pub fn is_nodivision(&self) -> bool

Checks if the value of the field is NODIVISION

impl R<u32, Reg<u32, _HFCOREPRESC>>

pub fn presc(&self) -> PRESC_R

Bits 8:16 - HFCORECLK Prescaler

impl R<u16, PRESC_A>

pub fn variant(&self) -> Variant<u16, PRESC_A>

Get enumerated values variant

pub fn is_nodivision(&self) -> bool

Checks if the value of the field is NODIVISION

impl R<u32, Reg<u32, _HFPERPRESC>>

pub fn presc(&self) -> PRESC_R

Bits 8:16 - HFPERCLK Prescaler

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_nodivision(&self) -> bool

Checks if the value of the field is NODIVISION

impl R<u32, Reg<u32, _HFEXPPRESC>>

pub fn presc(&self) -> PRESC_R

Bits 8:12 - HFEXPCLK Prescaler

impl R<u16, PRESC_A>

pub fn variant(&self) -> Variant<u16, PRESC_A>

Get enumerated values variant

pub fn is_nodivision(&self) -> bool

Checks if the value of the field is NODIVISION

impl R<u32, Reg<u32, _HFPERPRESCB>>

pub fn presc(&self) -> PRESC_R

Bits 8:16 - HFPERCLK Prescaler

impl R<u16, PRESC_A>

pub fn variant(&self) -> Variant<u16, PRESC_A>

Get enumerated values variant

pub fn is_nodivision(&self) -> bool

Checks if the value of the field is NODIVISION

impl R<u32, Reg<u32, _HFPERPRESCC>>

pub fn presc(&self) -> PRESC_R

Bits 8:16 - HFPERCLK Prescaler

impl R<u8, LETIMER0_A>

pub fn variant(&self) -> LETIMER0_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

pub fn is_div2048(&self) -> bool

Checks if the value of the field is DIV2048

pub fn is_div4096(&self) -> bool

Checks if the value of the field is DIV4096

pub fn is_div8192(&self) -> bool

Checks if the value of the field is DIV8192

pub fn is_div16384(&self) -> bool

Checks if the value of the field is DIV16384

pub fn is_div32768(&self) -> bool

Checks if the value of the field is DIV32768

impl R<u8, LETIMER1_A>

pub fn variant(&self) -> LETIMER1_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

pub fn is_div2048(&self) -> bool

Checks if the value of the field is DIV2048

pub fn is_div4096(&self) -> bool

Checks if the value of the field is DIV4096

pub fn is_div8192(&self) -> bool

Checks if the value of the field is DIV8192

pub fn is_div16384(&self) -> bool

Checks if the value of the field is DIV16384

pub fn is_div32768(&self) -> bool

Checks if the value of the field is DIV32768

impl R<u8, LESENSE_A>

pub fn variant(&self) -> LESENSE_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

impl R<u8, LCD_A>

pub fn variant(&self) -> LCD_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

impl R<u8, RTC_A>

pub fn variant(&self) -> RTC_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

pub fn is_div2048(&self) -> bool

Checks if the value of the field is DIV2048

pub fn is_div4096(&self) -> bool

Checks if the value of the field is DIV4096

pub fn is_div8192(&self) -> bool

Checks if the value of the field is DIV8192

pub fn is_div16384(&self) -> bool

Checks if the value of the field is DIV16384

pub fn is_div32768(&self) -> bool

Checks if the value of the field is DIV32768

impl R<u32, Reg<u32, _LFAPRESC0>>

pub fn letimer0(&self) -> LETIMER0_R

Bits 0:3 - Low Energy Timer 0 Prescaler

pub fn letimer1(&self) -> LETIMER1_R

Bits 4:7 - Low Energy Timer 1 Prescaler

pub fn lesense(&self) -> LESENSE_R

Bits 8:9 - Low Energy Sensor Interface Prescaler

pub fn lcd(&self) -> LCD_R

Bits 12:14 - Liquid Crystal Display Controller Prescaler

pub fn rtc(&self) -> RTC_R

Bits 16:19 - Real-Time Counter Prescaler

impl R<u8, LEUART0_A>

pub fn variant(&self) -> LEUART0_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

impl R<u8, LEUART1_A>

pub fn variant(&self) -> LEUART1_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

impl R<u8, SYSTICK_A>

pub fn variant(&self) -> Variant<u8, SYSTICK_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

impl R<u8, CSEN_A>

pub fn variant(&self) -> CSEN_A

Get enumerated values variant

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

impl R<u32, Reg<u32, _LFBPRESC0>>

pub fn leuart0(&self) -> LEUART0_R

Bits 0:1 - Low Energy UART 0 Prescaler

pub fn leuart1(&self) -> LEUART1_R

Bits 4:5 - Low Energy UART 1 Prescaler

pub fn systick(&self) -> SYSTICK_R

Bits 8:11 - Prescaler

pub fn csen(&self) -> CSEN_R

Bits 12:13 - Capacitive touch sense module Prescaler

impl R<u8, RTCC_A>

pub fn variant(&self) -> Variant<u8, RTCC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

impl R<u32, Reg<u32, _LFEPRESC0>>

pub fn rtcc(&self) -> RTCC_R

Bits 0:1 - Real-Time Counter and Calendar Prescaler

impl R<u32, Reg<u32, _SYNCBUSY>>

pub fn lfaclken0(&self) -> LFACLKEN0_R

Bit 0 - Low Frequency a Clock Enable 0 Busy

pub fn lfapresc0(&self) -> LFAPRESC0_R

Bit 2 - Low Frequency a Prescaler 0 Busy

pub fn lfbclken0(&self) -> LFBCLKEN0_R

Bit 4 - Low Frequency B Clock Enable 0 Busy

pub fn lfbpresc0(&self) -> LFBPRESC0_R

Bit 6 - Low Frequency B Prescaler 0 Busy

pub fn lfcclken0(&self) -> LFCCLKEN0_R

Bit 8 - Low Frequency C Clock Enable 0 Busy

pub fn lfeclken0(&self) -> LFECLKEN0_R

Bit 16 - Low Frequency E Clock Enable 0 Busy

pub fn lfepresc0(&self) -> LFEPRESC0_R

Bit 18 - Low Frequency E Prescaler 0 Busy

pub fn hfrcobsy(&self) -> HFRCOBSY_R

Bit 24 - HFRCO Busy

pub fn auxhfrcobsy(&self) -> AUXHFRCOBSY_R

Bit 25 - AUXHFRCO Busy

pub fn lfrcobsy(&self) -> LFRCOBSY_R

Bit 26 - LFRCO Busy

pub fn lfrcovrefbsy(&self) -> LFRCOVREFBSY_R

Bit 27 - LFRCO VREF Busy

pub fn hfxobsy(&self) -> HFXOBSY_R

Bit 28 - HFXO Busy

pub fn lfxobsy(&self) -> LFXOBSY_R

Bit 29 - LFXO Busy

pub fn ushfrcobsy(&self) -> USHFRCOBSY_R

Bit 30 - USHFRCO Busy

impl R<u32, Reg<u32, _FREEZE>>

pub fn regfreeze(&self) -> REGFREEZE_R

Bit 0 - Register Update Freeze

impl R<u32, Reg<u32, _PCNTCTRL>>

pub fn pcnt0clken(&self) -> PCNT0CLKEN_R

Bit 0 - PCNT0 Clock Enable

pub fn pcnt0clksel(&self) -> PCNT0CLKSEL_R

Bit 1 - PCNT0 Clock Select

pub fn pcnt1clken(&self) -> PCNT1CLKEN_R

Bit 2 - PCNT1 Clock Enable

pub fn pcnt1clksel(&self) -> PCNT1CLKSEL_R

Bit 3 - PCNT1 Clock Select

pub fn pcnt2clken(&self) -> PCNT2CLKEN_R

Bit 4 - PCNT2 Clock Enable

pub fn pcnt2clksel(&self) -> PCNT2CLKSEL_R

Bit 5 - PCNT2 Clock Select

impl R<u8, ADC0CLKDIV_A>

pub fn variant(&self) -> Variant<u8, ADC0CLKDIV_A>

Get enumerated values variant

pub fn is_nodivision(&self) -> bool

Checks if the value of the field is NODIVISION

impl R<u8, ADC0CLKSEL_A>

pub fn variant(&self) -> ADC0CLKSEL_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_auxhfrco(&self) -> bool

Checks if the value of the field is AUXHFRCO

pub fn is_hfxo(&self) -> bool

Checks if the value of the field is HFXO

pub fn is_hfsrcclk(&self) -> bool

Checks if the value of the field is HFSRCCLK

impl R<u8, ADC1CLKDIV_A>

pub fn variant(&self) -> Variant<u8, ADC1CLKDIV_A>

Get enumerated values variant

pub fn is_nodivision(&self) -> bool

Checks if the value of the field is NODIVISION

impl R<u8, ADC1CLKSEL_A>

pub fn variant(&self) -> ADC1CLKSEL_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_auxhfrco(&self) -> bool

Checks if the value of the field is AUXHFRCO

pub fn is_hfxo(&self) -> bool

Checks if the value of the field is HFXO

pub fn is_hfsrcclk(&self) -> bool

Checks if the value of the field is HFSRCCLK

impl R<u32, Reg<u32, _ADCCTRL>>

pub fn adc0clkdiv(&self) -> ADC0CLKDIV_R

Bits 0:1 - ADC0 Clock Prescaler

pub fn adc0clksel(&self) -> ADC0CLKSEL_R

Bits 4:5 - ADC0 Clock Select

pub fn adc0clkinv(&self) -> ADC0CLKINV_R

Bit 8 - Invert Clock Selected By ADC0CLKSEL

pub fn adc1clkdiv(&self) -> ADC1CLKDIV_R

Bits 16:17 - ADC1 Clock Prescaler

pub fn adc1clksel(&self) -> ADC1CLKSEL_R

Bits 20:21 - ADC1 Clock Select

pub fn adc1clkinv(&self) -> ADC1CLKINV_R

Bit 24 - Invert Clock Selected By ADC1CLKSEL

impl R<u8, SDIOCLKSEL_A>

pub fn variant(&self) -> SDIOCLKSEL_A

Get enumerated values variant

pub fn is_hfrco(&self) -> bool

Checks if the value of the field is HFRCO

pub fn is_hfxo(&self) -> bool

Checks if the value of the field is HFXO

pub fn is_auxhfrco(&self) -> bool

Checks if the value of the field is AUXHFRCO

pub fn is_ushfrco(&self) -> bool

Checks if the value of the field is USHFRCO

impl R<u32, Reg<u32, _SDIOCTRL>>

pub fn sdioclksel(&self) -> SDIOCLKSEL_R

Bits 0:1 - SDIO Reference Clock Select

pub fn sdioclkdis(&self) -> SDIOCLKDIS_R

Bit 7 - SDIO Reference Clock Disable

impl R<u8, QSPI0CLKSEL_A>

pub fn variant(&self) -> QSPI0CLKSEL_A

Get enumerated values variant

pub fn is_hfrco(&self) -> bool

Checks if the value of the field is HFRCO

pub fn is_hfxo(&self) -> bool

Checks if the value of the field is HFXO

pub fn is_auxhfrco(&self) -> bool

Checks if the value of the field is AUXHFRCO

pub fn is_ushfrco(&self) -> bool

Checks if the value of the field is USHFRCO

impl R<u32, Reg<u32, _QSPICTRL>>

pub fn qspi0clksel(&self) -> QSPI0CLKSEL_R

Bits 0:1 - QSPI0 Reference Clock Select

pub fn qspi0clkdis(&self) -> QSPI0CLKDIS_R

Bit 7 - QSPI0 Reference Clock Disable

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn clkout0pen(&self) -> CLKOUT0PEN_R

Bit 0 - CLKOUT0 Pin Enable

pub fn clkout1pen(&self) -> CLKOUT1PEN_R

Bit 1 - CLKOUT1 Pin Enable

pub fn clkout2pen(&self) -> CLKOUT2PEN_R

Bit 2 - CLKOUT2 Pin Enable

pub fn clkin0pen(&self) -> CLKIN0PEN_R

Bit 28 - CLKIN0 Pin Enable

impl R<u8, CLKOUT0LOC_A>

pub fn variant(&self) -> Variant<u8, CLKOUT0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

impl R<u8, CLKOUT1LOC_A>

pub fn variant(&self) -> Variant<u8, CLKOUT1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

impl R<u8, CLKOUT2LOC_A>

pub fn variant(&self) -> Variant<u8, CLKOUT2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn clkout0loc(&self) -> CLKOUT0LOC_R

Bits 0:5 - I/O Location

pub fn clkout1loc(&self) -> CLKOUT1LOC_R

Bits 8:13 - I/O Location

pub fn clkout2loc(&self) -> CLKOUT2LOC_R

Bits 16:21 - I/O Location

impl R<u8, CLKIN0LOC_A>

pub fn variant(&self) -> Variant<u8, CLKIN0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC1>>

pub fn clkin0loc(&self) -> CLKIN0LOC_R

Bits 0:5 - I/O Location

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - Configuration Lock Key

impl R<u32, Reg<u32, _HFRCOSS>>

pub fn ssamp(&self) -> SSAMP_R

Bits 0:2 - Spread Spectrum Amplitude

pub fn ssinv(&self) -> SSINV_R

Bits 8:12 - Spread Spectrum Update Interval

impl R<u8, USBCLKSEL_A>

pub fn variant(&self) -> Variant<u8, USBCLKSEL_A>

Get enumerated values variant

pub fn is_ushfrco(&self) -> bool

Checks if the value of the field is USHFRCO

pub fn is_hfxo(&self) -> bool

Checks if the value of the field is HFXO

pub fn is_hfxox2(&self) -> bool

Checks if the value of the field is HFXOX2

pub fn is_hfrco(&self) -> bool

Checks if the value of the field is HFRCO

pub fn is_lfxo(&self) -> bool

Checks if the value of the field is LFXO

pub fn is_lfrco(&self) -> bool

Checks if the value of the field is LFRCO

impl R<u32, Reg<u32, _USBCTRL>>

pub fn usbclksel(&self) -> USBCLKSEL_R

Bits 0:2 - USB Rate Clock Select

pub fn usbclken(&self) -> USBCLKEN_R

Bit 7 - USB Rate Clock Enable

impl R<u32, Reg<u32, _USBCRCTRL>>

pub fn usbcren(&self) -> USBCREN_R

Bit 0 - Clock Recovery Enable

pub fn usblscrmd(&self) -> USBLSCRMD_R

Bit 1 - Low Speed Clock Recovery Mode

impl R<u8, INCWIDTH_A>

pub fn variant(&self) -> INCWIDTH_A

Get enumerated values variant

pub fn is_incwidth1(&self) -> bool

Checks if the value of the field is INCWIDTH1

pub fn is_incwidth2(&self) -> bool

Checks if the value of the field is INCWIDTH2

pub fn is_incwidth3(&self) -> bool

Checks if the value of the field is INCWIDTH3

pub fn is_incwidth4(&self) -> bool

Checks if the value of the field is INCWIDTH4

impl R<u8, DMA0MODE_A>

pub fn variant(&self) -> DMA0MODE_A

Get enumerated values variant

pub fn is_full(&self) -> bool

Checks if the value of the field is FULL

pub fn is_lenlimit(&self) -> bool

Checks if the value of the field is LENLIMIT

pub fn is_fullbyte(&self) -> bool

Checks if the value of the field is FULLBYTE

pub fn is_lenlimitbyte(&self) -> bool

Checks if the value of the field is LENLIMITBYTE

impl R<u8, DMA0RSEL_A>

pub fn variant(&self) -> DMA0RSEL_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_ddata0(&self) -> bool

Checks if the value of the field is DDATA0

pub fn is_ddata0big(&self) -> bool

Checks if the value of the field is DDATA0BIG

pub fn is_qdata0(&self) -> bool

Checks if the value of the field is QDATA0

impl R<u8, DMA1MODE_A>

pub fn variant(&self) -> DMA1MODE_A

Get enumerated values variant

pub fn is_full(&self) -> bool

Checks if the value of the field is FULL

pub fn is_lenlimit(&self) -> bool

Checks if the value of the field is LENLIMIT

pub fn is_fullbyte(&self) -> bool

Checks if the value of the field is FULLBYTE

pub fn is_lenlimitbyte(&self) -> bool

Checks if the value of the field is LENLIMITBYTE

impl R<u8, DMA1RSEL_A>

pub fn variant(&self) -> DMA1RSEL_A

Get enumerated values variant

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_ddata1(&self) -> bool

Checks if the value of the field is DDATA1

pub fn is_qdata1(&self) -> bool

Checks if the value of the field is QDATA1

pub fn is_qdata1big(&self) -> bool

Checks if the value of the field is QDATA1BIG

impl R<u32, Reg<u32, _CTRL>>

pub fn aes(&self) -> AES_R

Bit 0 - AES Mode

pub fn keybufdis(&self) -> KEYBUFDIS_R

Bit 1 - Key Buffer Disable

pub fn sha(&self) -> SHA_R

Bit 2 - SHA Mode

pub fn nobusystall(&self) -> NOBUSYSTALL_R

Bit 10 - No Stalling of Bus When Busy

pub fn incwidth(&self) -> INCWIDTH_R

Bits 14:15 - Increment Width

pub fn dma0mode(&self) -> DMA0MODE_R

Bits 16:17 - DMA0 Read Mode

pub fn dma0rsel(&self) -> DMA0RSEL_R

Bits 20:21 - DMA0 Read Register Select

pub fn dma1mode(&self) -> DMA1MODE_R

Bits 24:25 - DMA1 Read Mode

pub fn dma1rsel(&self) -> DMA1RSEL_R

Bits 28:29 - DATA0 DMA Unaligned Read Register Select

pub fn combdma0wereq(&self) -> COMBDMA0WEREQ_R

Bit 31 - Combined Data0 Write DMA Request

impl R<u8, MODULUS_A>

pub fn variant(&self) -> Variant<u8, MODULUS_A>

Get enumerated values variant

pub fn is_bin256(&self) -> bool

Checks if the value of the field is BIN256

pub fn is_bin128(&self) -> bool

Checks if the value of the field is BIN128

pub fn is_eccbin233p(&self) -> bool

Checks if the value of the field is ECCBIN233P

pub fn is_eccbin163p(&self) -> bool

Checks if the value of the field is ECCBIN163P

pub fn is_gcmbin128(&self) -> bool

Checks if the value of the field is GCMBIN128

pub fn is_eccprime256p(&self) -> bool

Checks if the value of the field is ECCPRIME256P

pub fn is_eccprime224p(&self) -> bool

Checks if the value of the field is ECCPRIME224P

pub fn is_eccprime192p(&self) -> bool

Checks if the value of the field is ECCPRIME192P

pub fn is_eccbin233n(&self) -> bool

Checks if the value of the field is ECCBIN233N

pub fn is_eccbin233kn(&self) -> bool

Checks if the value of the field is ECCBIN233KN

pub fn is_eccbin163n(&self) -> bool

Checks if the value of the field is ECCBIN163N

pub fn is_eccbin163kn(&self) -> bool

Checks if the value of the field is ECCBIN163KN

pub fn is_eccprime256n(&self) -> bool

Checks if the value of the field is ECCPRIME256N

pub fn is_eccprime224n(&self) -> bool

Checks if the value of the field is ECCPRIME224N

pub fn is_eccprime192n(&self) -> bool

Checks if the value of the field is ECCPRIME192N

impl R<u8, MULWIDTH_A>

pub fn variant(&self) -> Variant<u8, MULWIDTH_A>

Get enumerated values variant

pub fn is_mul256(&self) -> bool

Checks if the value of the field is MUL256

pub fn is_mul128(&self) -> bool

Checks if the value of the field is MUL128

pub fn is_mulmod(&self) -> bool

Checks if the value of the field is MULMOD

impl R<u8, RESULTWIDTH_A>

pub fn variant(&self) -> Variant<u8, RESULTWIDTH_A>

Get enumerated values variant

pub fn is_256bit(&self) -> bool

Checks if the value of the field is _256BIT

pub fn is_128bit(&self) -> bool

Checks if the value of the field is _128BIT

pub fn is_260bit(&self) -> bool

Checks if the value of the field is _260BIT

impl R<u32, Reg<u32, _WAC>>

pub fn modulus(&self) -> MODULUS_R

Bits 0:3 - Modular Operation Modulus

pub fn modop(&self) -> MODOP_R

Bit 4 - Modular Operation Field Type

pub fn mulwidth(&self) -> MULWIDTH_R

Bits 8:9 - Multiply Width

pub fn resultwidth(&self) -> RESULTWIDTH_R

Bits 10:11 - Result Width

impl R<u32, Reg<u32, _CMD>>

pub fn instr(&self) -> INSTR_R

Bits 0:7 - Execute Instruction

impl R<u32, Reg<u32, _STATUS>>

pub fn seqrunning(&self) -> SEQRUNNING_R

Bit 0 - AES SEQUENCE Running

pub fn instrrunning(&self) -> INSTRRUNNING_R

Bit 1 - Action is Active

pub fn dmaactive(&self) -> DMAACTIVE_R

Bit 2 - DMA Action is Active

impl R<u8, DATA0ZERO_A>

pub fn variant(&self) -> Variant<u8, DATA0ZERO_A>

Get enumerated values variant

pub fn is_zero0to31(&self) -> bool

Checks if the value of the field is ZERO0TO31

pub fn is_zero32to63(&self) -> bool

Checks if the value of the field is ZERO32TO63

pub fn is_zero64to95(&self) -> bool

Checks if the value of the field is ZERO64TO95

pub fn is_zero96to127(&self) -> bool

Checks if the value of the field is ZERO96TO127

impl R<u32, Reg<u32, _DSTATUS>>

pub fn data0zero(&self) -> DATA0ZERO_R

Bits 0:3 - Data 0 Zero

pub fn ddata0lsbs(&self) -> DDATA0LSBS_R

Bits 8:11 - LSBs in DDATA0

pub fn ddata0msbs(&self) -> DDATA0MSBS_R

Bits 16:19 - MSB in DDATA0

pub fn ddata1msb(&self) -> DDATA1MSB_R

Bit 20 - MSB in DDATA1

pub fn carry(&self) -> CARRY_R

Bit 24 - Carry From Arithmetic Operation

impl R<u8, V0_A>

pub fn variant(&self) -> V0_A

Get enumerated values variant

pub fn is_ddata0(&self) -> bool

Checks if the value of the field is DDATA0

pub fn is_ddata1(&self) -> bool

Checks if the value of the field is DDATA1

pub fn is_ddata2(&self) -> bool

Checks if the value of the field is DDATA2

pub fn is_ddata3(&self) -> bool

Checks if the value of the field is DDATA3

pub fn is_ddata4(&self) -> bool

Checks if the value of the field is DDATA4

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

impl R<u8, V1_A>

pub fn variant(&self) -> V1_A

Get enumerated values variant

pub fn is_ddata0(&self) -> bool

Checks if the value of the field is DDATA0

pub fn is_ddata1(&self) -> bool

Checks if the value of the field is DDATA1

pub fn is_ddata2(&self) -> bool

Checks if the value of the field is DDATA2

pub fn is_ddata3(&self) -> bool

Checks if the value of the field is DDATA3

pub fn is_ddata4(&self) -> bool

Checks if the value of the field is DDATA4

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

impl R<u32, Reg<u32, _CSTATUS>>

pub fn v0(&self) -> V0_R

Bits 0:2 - Selected ALU Operand 0

pub fn v1(&self) -> V1_R

Bits 8:10 - Selected ALU Operand 1

pub fn seqpart(&self) -> SEQPART_R

Bit 16 - Sequence Part

pub fn seqskip(&self) -> SEQSKIP_R

Bit 17 - Sequence Skip Next Instruction

pub fn seqip(&self) -> SEQIP_R

Bits 20:24 - Sequence Next Instruction Pointer

impl R<u32, Reg<u32, _KEY>>

pub fn key(&self) -> KEY_R

Bits 0:31 - Key Access

impl R<u32, Reg<u32, _KEYBUF>>

pub fn keybuf(&self) -> KEYBUF_R

Bits 0:31 - Key Buffer Access

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_16bytes(&self) -> bool

Checks if the value of the field is _16BYTES

pub fn is_32bytes(&self) -> bool

Checks if the value of the field is _32BYTES

pub fn is_64bytes(&self) -> bool

Checks if the value of the field is _64BYTES

impl R<u32, Reg<u32, _SEQCTRL>>

pub fn lengtha(&self) -> LENGTHA_R

Bits 0:13 - Buffer Length a in Bytes

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 20:21 - Size of Data Blocks

pub fn dma0skip(&self) -> DMA0SKIP_R

Bits 24:25 - DMA0 Skip

pub fn dma1skip(&self) -> DMA1SKIP_R

Bits 26:27 - DMA1 Skip

pub fn dma0presa(&self) -> DMA0PRESA_R

Bit 28 - DMA0 Preserve a

pub fn dma1presa(&self) -> DMA1PRESA_R

Bit 29 - DMA1 Preserve a

pub fn halt(&self) -> HALT_R

Bit 31 - Halt Sequence

impl R<u32, Reg<u32, _SEQCTRLB>>

pub fn lengthb(&self) -> LENGTHB_R

Bits 0:13 - Buffer Length B in Bytes

pub fn dma0presb(&self) -> DMA0PRESB_R

Bit 28 - DMA0 Preserve B

pub fn dma1presb(&self) -> DMA1PRESB_R

Bit 29 - DMA1 Preserve B

impl R<u32, Reg<u32, _IF>>

pub fn instrdone(&self) -> INSTRDONE_R

Bit 0 - Instruction Done

pub fn seqdone(&self) -> SEQDONE_R

Bit 1 - Sequence Done

impl R<u32, Reg<u32, _IEN>>

pub fn instrdone(&self) -> INSTRDONE_R

Bit 0 - INSTRDONE Interrupt Enable

pub fn seqdone(&self) -> SEQDONE_R

Bit 1 - SEQDONE Interrupt Enable

impl R<u32, Reg<u32, _SEQ0>>

pub fn instr0(&self) -> INSTR0_R

Bits 0:7 - Sequence Instruction 0

pub fn instr1(&self) -> INSTR1_R

Bits 8:15 - Sequence Instruction 1

pub fn instr2(&self) -> INSTR2_R

Bits 16:23 - Sequence Instruction 2

pub fn instr3(&self) -> INSTR3_R

Bits 24:31 - Sequence Instruction 3

impl R<u32, Reg<u32, _SEQ1>>

pub fn instr4(&self) -> INSTR4_R

Bits 0:7 - Sequence Instruction 4

pub fn instr5(&self) -> INSTR5_R

Bits 8:15 - Sequence Instruction 5

pub fn instr6(&self) -> INSTR6_R

Bits 16:23 - Sequence Instruction 6

pub fn instr7(&self) -> INSTR7_R

Bits 24:31 - Sequence Instruction 7

impl R<u32, Reg<u32, _SEQ2>>

pub fn instr8(&self) -> INSTR8_R

Bits 0:7 - Sequence Instruction 8

pub fn instr9(&self) -> INSTR9_R

Bits 8:15 - Sequence Instruction 9

pub fn instr10(&self) -> INSTR10_R

Bits 16:23 - Sequence Instruction 10

pub fn instr11(&self) -> INSTR11_R

Bits 24:31 - Sequence Instruction 11

impl R<u32, Reg<u32, _SEQ3>>

pub fn instr12(&self) -> INSTR12_R

Bits 0:7 - Sequence Instruction 12

pub fn instr13(&self) -> INSTR13_R

Bits 8:15 - Sequence Instruction 13

pub fn instr14(&self) -> INSTR14_R

Bits 16:23 - Sequence Instruction 14

pub fn instr15(&self) -> INSTR15_R

Bits 24:31 - Sequence Instruction 15

impl R<u32, Reg<u32, _SEQ4>>

pub fn instr16(&self) -> INSTR16_R

Bits 0:7 - Sequence Instruction 16

pub fn instr17(&self) -> INSTR17_R

Bits 8:15 - Sequence Instruction 17

pub fn instr18(&self) -> INSTR18_R

Bits 16:23 - Sequence Instruction 18

pub fn instr19(&self) -> INSTR19_R

Bits 24:31 - Sequence Instruction 19

impl R<u32, Reg<u32, _DATA0>>

pub fn data0(&self) -> DATA0_R

Bits 0:31 - Data 0 Access

impl R<u32, Reg<u32, _DATA1>>

pub fn data1(&self) -> DATA1_R

Bits 0:31 - Data 1 Access

impl R<u32, Reg<u32, _DATA2>>

pub fn data2(&self) -> DATA2_R

Bits 0:31 - Data 2 Access

impl R<u32, Reg<u32, _DATA3>>

pub fn data3(&self) -> DATA3_R

Bits 0:31 - Data 3 Access

impl R<u32, Reg<u32, _DATA0XOR>>

pub fn data0xor(&self) -> DATA0XOR_R

Bits 0:31 - XOR Data 0 Access

impl R<u32, Reg<u32, _DATA0BYTE>>

pub fn data0byte(&self) -> DATA0BYTE_R

Bits 0:7 - Data 0 Byte Access

impl R<u32, Reg<u32, _DATA1BYTE>>

pub fn data1byte(&self) -> DATA1BYTE_R

Bits 0:7 - Data 1 Byte Access

impl R<u32, Reg<u32, _DATA0XORBYTE>>

pub fn data0xorbyte(&self) -> DATA0XORBYTE_R

Bits 0:7 - Data 0 XOR Byte Access

impl R<u32, Reg<u32, _DATA0BYTE12>>

pub fn data0byte12(&self) -> DATA0BYTE12_R

Bits 0:7 - Data 0 Byte 12 Access

impl R<u32, Reg<u32, _DATA0BYTE13>>

pub fn data0byte13(&self) -> DATA0BYTE13_R

Bits 0:7 - Data 0 Byte 13 Access

impl R<u32, Reg<u32, _DATA0BYTE14>>

pub fn data0byte14(&self) -> DATA0BYTE14_R

Bits 0:7 - Data 0 Byte 14 Access

impl R<u32, Reg<u32, _DATA0BYTE15>>

pub fn data0byte15(&self) -> DATA0BYTE15_R

Bits 0:7 - Data 0 Byte 15 Access

impl R<u32, Reg<u32, _DDATA0>>

pub fn ddata0(&self) -> DDATA0_R

Bits 0:31 - Double Data 0 Access

impl R<u32, Reg<u32, _DDATA1>>

pub fn ddata1(&self) -> DDATA1_R

Bits 0:31 - Double Data 0 Access

impl R<u32, Reg<u32, _DDATA2>>

pub fn ddata2(&self) -> DDATA2_R

Bits 0:31 - Double Data 0 Access

impl R<u32, Reg<u32, _DDATA3>>

pub fn ddata3(&self) -> DDATA3_R

Bits 0:31 - Double Data 0 Access

impl R<u32, Reg<u32, _DDATA4>>

pub fn ddata4(&self) -> DDATA4_R

Bits 0:31 - Double Data 0 Access

impl R<u32, Reg<u32, _DDATA0BIG>>

pub fn ddata0big(&self) -> DDATA0BIG_R

Bits 0:31 - Double Data 0 Big Endian Access

impl R<u32, Reg<u32, _DDATA0BYTE>>

pub fn ddata0byte(&self) -> DDATA0BYTE_R

Bits 0:7 - Ddata 0 Byte Access

impl R<u32, Reg<u32, _DDATA1BYTE>>

pub fn ddata1byte(&self) -> DDATA1BYTE_R

Bits 0:7 - Ddata 1 Byte Access

impl R<u32, Reg<u32, _DDATA0BYTE32>>

pub fn ddata0byte32(&self) -> DDATA0BYTE32_R

Bits 0:3 - Ddata 0 Byte 32 Access

impl R<u32, Reg<u32, _QDATA0>>

pub fn qdata0(&self) -> QDATA0_R

Bits 0:31 - Quad Data 0 Access

impl R<u32, Reg<u32, _QDATA1>>

pub fn qdata1(&self) -> QDATA1_R

Bits 0:31 - Quad Data 1 Access

impl R<u32, Reg<u32, _QDATA1BIG>>

pub fn qdata1big(&self) -> QDATA1BIG_R

Bits 0:31 - Quad Data 1 Big Endian Access

impl R<u32, Reg<u32, _QDATA0BYTE>>

pub fn qdata0byte(&self) -> QDATA0BYTE_R

Bits 0:7 - Qdata 0 Byte Access

impl R<u32, Reg<u32, _QDATA1BYTE>>

pub fn qdata1byte(&self) -> QDATA1BYTE_R

Bits 0:7 - Qdata 1 Byte Access

impl R<u8, SCANMODE_A>

pub fn variant(&self) -> Variant<u8, SCANMODE_A>

Get enumerated values variant

pub fn is_periodic(&self) -> bool

Checks if the value of the field is PERIODIC

pub fn is_oneshot(&self) -> bool

Checks if the value of the field is ONESHOT

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, SCANCONF_A>

pub fn variant(&self) -> SCANCONF_A

Get enumerated values variant

pub fn is_dirmap(&self) -> bool

Checks if the value of the field is DIRMAP

pub fn is_invmap(&self) -> bool

Checks if the value of the field is INVMAP

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_decdef(&self) -> bool

Checks if the value of the field is DECDEF

impl R<u8, DMAWU_A>

pub fn variant(&self) -> Variant<u8, DMAWU_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_bufdatav(&self) -> bool

Checks if the value of the field is BUFDATAV

pub fn is_buflevel(&self) -> bool

Checks if the value of the field is BUFLEVEL

impl R<u32, Reg<u32, _CTRL>>

pub fn scanmode(&self) -> SCANMODE_R

Bits 0:1 - Configure Scan Mode

pub fn prssel(&self) -> PRSSEL_R

Bits 2:6 - Scan Start PRS Select

pub fn scanconf(&self) -> SCANCONF_R

Bits 7:8 - Select Scan Configuration

pub fn altexmap(&self) -> ALTEXMAP_R

Bit 11 - Alternative Excitation Map

pub fn dualsample(&self) -> DUALSAMPLE_R

Bit 13 - Enable Dual Sample Mode

pub fn bufow(&self) -> BUFOW_R

Bit 16 - Result Buffer Overwrite

pub fn strscanres(&self) -> STRSCANRES_R

Bit 17 - Enable Storing of SCANRES

pub fn bufidl(&self) -> BUFIDL_R

Bit 19 - Result Buffer Interrupt and DMA Trigger Level

pub fn dmawu(&self) -> DMAWU_R

Bits 20:21 - DMA Wake-up From EM2

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 22 - Debug Mode Run Enable

impl R<u8, AUXPRESC_A>

pub fn variant(&self) -> AUXPRESC_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

impl R<u8, LFPRESC_A>

pub fn variant(&self) -> LFPRESC_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

impl R<u8, PCPRESC_A>

pub fn variant(&self) -> PCPRESC_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

impl R<u32, Reg<u32, _TIMCTRL>>

pub fn auxpresc(&self) -> AUXPRESC_R

Bits 0:1 - Prescaling Factor for High Frequency Timer

pub fn lfpresc(&self) -> LFPRESC_R

Bits 4:6 - Prescaling Factor for Low Frequency Timer

pub fn pcpresc(&self) -> PCPRESC_R

Bits 8:10 - Period Counter Prescaling

pub fn pctop(&self) -> PCTOP_R

Bits 12:19 - Period Counter Top Value

pub fn startdly(&self) -> STARTDLY_R

Bits 22:23 - Start Delay Configuration

pub fn auxstartup(&self) -> AUXSTARTUP_R

Bit 28 - AUXHFRCO Startup Configuration

impl R<u8, ACMP0MODE_A>

pub fn variant(&self) -> Variant<u8, ACMP0MODE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_mux(&self) -> bool

Checks if the value of the field is MUX

pub fn is_muxthres(&self) -> bool

Checks if the value of the field is MUXTHRES

impl R<u8, ACMP1MODE_A>

pub fn variant(&self) -> Variant<u8, ACMP1MODE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_mux(&self) -> bool

Checks if the value of the field is MUX

pub fn is_muxthres(&self) -> bool

Checks if the value of the field is MUXTHRES

impl R<u8, WARMUPMODE_A>

pub fn variant(&self) -> WARMUPMODE_A

Get enumerated values variant

pub fn is_normal(&self) -> bool

Checks if the value of the field is NORMAL

pub fn is_keepacmpwarm(&self) -> bool

Checks if the value of the field is KEEPACMPWARM

pub fn is_keepdacwarm(&self) -> bool

Checks if the value of the field is KEEPDACWARM

pub fn is_keepacmpdacwarm(&self) -> bool

Checks if the value of the field is KEEPACMPDACWARM

impl R<u32, Reg<u32, _PERCTRL>>

pub fn dacch0en(&self) -> DACCH0EN_R

Bit 0 - VDAC CH0 Enable

pub fn dacch1en(&self) -> DACCH1EN_R

Bit 1 - VDAC CH1 Enable

pub fn dacch0data(&self) -> DACCH0DATA_R

Bit 2 - VDAC CH0 Data Selection

pub fn dacch1data(&self) -> DACCH1DATA_R

Bit 3 - VDAC CH1 Data Selection

pub fn dacstartup(&self) -> DACSTARTUP_R

Bit 6 - VDAC Startup Configuration

pub fn dacconvtrig(&self) -> DACCONVTRIG_R

Bit 8 - VDAC Conversion Trigger Configuration

pub fn acmp0mode(&self) -> ACMP0MODE_R

Bits 20:21 - ACMP0 Mode

pub fn acmp1mode(&self) -> ACMP1MODE_R

Bits 22:23 - ACMP1 Mode

pub fn acmp0inv(&self) -> ACMP0INV_R

Bit 24 - Invert Analog Comparator 0 Output

pub fn acmp1inv(&self) -> ACMP1INV_R

Bit 25 - Invert Analog Comparator 1 Output

pub fn acmp0hysten(&self) -> ACMP0HYSTEN_R

Bit 26 - ACMP0 Hysteresis Enable

pub fn acmp1hysten(&self) -> ACMP1HYSTEN_R

Bit 27 - ACMP1 Hysteresis Enable

pub fn warmupmode(&self) -> WARMUPMODE_R

Bits 28:29 - ACMP and VDAC Duty Cycle Mode

impl R<u8, PRSSEL0_A>

pub fn variant(&self) -> Variant<u8, PRSSEL0_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, PRSSEL1_A>

pub fn variant(&self) -> Variant<u8, PRSSEL1_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, PRSSEL2_A>

pub fn variant(&self) -> Variant<u8, PRSSEL2_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, PRSSEL3_A>

pub fn variant(&self) -> Variant<u8, PRSSEL3_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _DECCTRL>>

pub fn disable(&self) -> DISABLE_R

Bit 0 - Disable the Decoder

pub fn errchk(&self) -> ERRCHK_R

Bit 1 - Enable Check of Current State

pub fn intmap(&self) -> INTMAP_R

Bit 2 - Enable Decoder to Channel Interrupt Mapping

pub fn hystprs0(&self) -> HYSTPRS0_R

Bit 3 - Enable Decoder Hysteresis on PRS0 Output

pub fn hystprs1(&self) -> HYSTPRS1_R

Bit 4 - Enable Decoder Hysteresis on PRS1 Output

pub fn hystprs2(&self) -> HYSTPRS2_R

Bit 5 - Enable Decoder Hysteresis on PRS2 Output

pub fn hystirq(&self) -> HYSTIRQ_R

Bit 6 - Enable Decoder Hysteresis on Interrupt Requests

pub fn prscnt(&self) -> PRSCNT_R

Bit 7 - Enable Count Mode on Decoder PRS Channels 0 and 1

pub fn input(&self) -> INPUT_R

Bit 8 - LESENSE Decoder Input Configuration

pub fn prssel0(&self) -> PRSSEL0_R

Bits 10:14 - LESENSE Decoder PRS Input 0 Configuration

pub fn prssel1(&self) -> PRSSEL1_R

Bits 15:19 - LESENSE Decoder PRS Input 1 Configuration

pub fn prssel2(&self) -> PRSSEL2_R

Bits 20:24 - LESENSE Decoder PRS Input 2 Configuration

pub fn prssel3(&self) -> PRSSEL3_R

Bits 25:29 - LESENSE Decoder PRS Input 3 Configuration

impl R<u8, BIASMODE_A>

pub fn variant(&self) -> Variant<u8, BIASMODE_A>

Get enumerated values variant

pub fn is_donttouch(&self) -> bool

Checks if the value of the field is DONTTOUCH

pub fn is_dutycycle(&self) -> bool

Checks if the value of the field is DUTYCYCLE

pub fn is_highacc(&self) -> bool

Checks if the value of the field is HIGHACC

impl R<u32, Reg<u32, _BIASCTRL>>

pub fn biasmode(&self) -> BIASMODE_R

Bits 0:1 - Select Bias Mode

impl R<u32, Reg<u32, _EVALCTRL>>

pub fn winsize(&self) -> WINSIZE_R

Bits 0:15 - Sliding Window and Step Detection Size

impl R<u32, Reg<u32, _PRSCTRL>>

pub fn deccmpval(&self) -> DECCMPVAL_R

Bits 0:4 - Decoder State Compare Value

pub fn deccmpmask(&self) -> DECCMPMASK_R

Bits 8:12 - Decoder State Compare Value Mask

pub fn deccmpen(&self) -> DECCMPEN_R

Bit 16 - Enable PRS Output DECCMP

impl R<u32, Reg<u32, _CHEN>>

pub fn chen(&self) -> CHEN_R

Bits 0:15 - Enable Scan Channel

impl R<u32, Reg<u32, _SCANRES>>

pub fn scanres(&self) -> SCANRES_R

Bits 0:15 - Scan Results

pub fn stepdir(&self) -> STEPDIR_R

Bits 16:31 - Direction of Previous Step Detection

impl R<u32, Reg<u32, _STATUS>>

pub fn bufdatav(&self) -> BUFDATAV_R

Bit 0 - Result Data Valid

pub fn bufhalffull(&self) -> BUFHALFFULL_R

Bit 1 - Result Buffer Half Full

pub fn buffull(&self) -> BUFFULL_R

Bit 2 - Result Buffer Full

pub fn running(&self) -> RUNNING_R

Bit 3 - LESENSE Periodic Counter Running

pub fn scanactive(&self) -> SCANACTIVE_R

Bit 4 - LESENSE Scan Active

pub fn dacactive(&self) -> DACACTIVE_R

Bit 5 - LESENSE VDAC Interface is Active

impl R<u32, Reg<u32, _PTR>>

pub fn rd(&self) -> RD_R

Bits 0:3 - Result Buffer Read Pointer

pub fn wr(&self) -> WR_R

Bits 4:7 - Result Buffer Write Pointer

impl R<u32, Reg<u32, _BUFDATA>>

pub fn bufdata(&self) -> BUFDATA_R

Bits 0:15 - Result Data

pub fn bufdatasrc(&self) -> BUFDATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _CURCH>>

pub fn curch(&self) -> CURCH_R

Bits 0:3 - Current Channel Index

impl R<u32, Reg<u32, _DECSTATE>>

pub fn decstate(&self) -> DECSTATE_R

Bits 0:4 - Current Decoder State

impl R<u32, Reg<u32, _SENSORSTATE>>

pub fn sensorstate(&self) -> SENSORSTATE_R

Bits 0:3 - Decoder Input Register

impl R<u8, CH0_A>

pub fn variant(&self) -> CH0_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u8, CH1_A>

pub fn variant(&self) -> CH1_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u8, CH2_A>

pub fn variant(&self) -> CH2_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u8, CH3_A>

pub fn variant(&self) -> CH3_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u8, CH4_A>

pub fn variant(&self) -> CH4_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u8, CH5_A>

pub fn variant(&self) -> CH5_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u8, CH6_A>

pub fn variant(&self) -> CH6_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u8, CH7_A>

pub fn variant(&self) -> CH7_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u8, CH8_A>

pub fn variant(&self) -> CH8_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u8, CH9_A>

pub fn variant(&self) -> CH9_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u8, CH10_A>

pub fn variant(&self) -> CH10_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u8, CH11_A>

pub fn variant(&self) -> CH11_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u8, CH12_A>

pub fn variant(&self) -> CH12_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u8, CH13_A>

pub fn variant(&self) -> CH13_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u8, CH14_A>

pub fn variant(&self) -> CH14_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u8, CH15_A>

pub fn variant(&self) -> CH15_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dac(&self) -> bool

Checks if the value of the field is DAC

impl R<u32, Reg<u32, _IDLECONF>>

pub fn ch0(&self) -> CH0_R

Bits 0:1 - Channel 0 Idle Phase Configuration

pub fn ch1(&self) -> CH1_R

Bits 2:3 - Channel 1 Idle Phase Configuration

pub fn ch2(&self) -> CH2_R

Bits 4:5 - Channel 2 Idle Phase Configuration

pub fn ch3(&self) -> CH3_R

Bits 6:7 - Channel 3 Idle Phase Configuration

pub fn ch4(&self) -> CH4_R

Bits 8:9 - Channel 4 Idle Phase Configuration

pub fn ch5(&self) -> CH5_R

Bits 10:11 - Channel 5 Idle Phase Configuration

pub fn ch6(&self) -> CH6_R

Bits 12:13 - Channel 6 Idle Phase Configuration

pub fn ch7(&self) -> CH7_R

Bits 14:15 - Channel 7 Idle Phase Configuration

pub fn ch8(&self) -> CH8_R

Bits 16:17 - Channel 8 Idle Phase Configuration

pub fn ch9(&self) -> CH9_R

Bits 18:19 - Channel 9 Idle Phase Configuration

pub fn ch10(&self) -> CH10_R

Bits 20:21 - Channel 10 Idle Phase Configuration

pub fn ch11(&self) -> CH11_R

Bits 22:23 - Channel 11 Idle Phase Configuration

pub fn ch12(&self) -> CH12_R

Bits 24:25 - Channel 12 Idle Phase Configuration

pub fn ch13(&self) -> CH13_R

Bits 26:27 - Channel 13 Idle Phase Configuration

pub fn ch14(&self) -> CH14_R

Bits 28:29 - Channel 14 Idle Phase Configuration

pub fn ch15(&self) -> CH15_R

Bits 30:31 - Channel 15 Idle Phase Configuration

impl R<u8, IDLECONF0_A>

pub fn variant(&self) -> Variant<u8, IDLECONF0_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

impl R<u8, IDLECONF1_A>

pub fn variant(&self) -> Variant<u8, IDLECONF1_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

impl R<u8, IDLECONF2_A>

pub fn variant(&self) -> Variant<u8, IDLECONF2_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

impl R<u8, IDLECONF3_A>

pub fn variant(&self) -> Variant<u8, IDLECONF3_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

impl R<u8, IDLECONF4_A>

pub fn variant(&self) -> Variant<u8, IDLECONF4_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

impl R<u8, IDLECONF5_A>

pub fn variant(&self) -> Variant<u8, IDLECONF5_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

impl R<u8, IDLECONF6_A>

pub fn variant(&self) -> Variant<u8, IDLECONF6_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

impl R<u8, IDLECONF7_A>

pub fn variant(&self) -> Variant<u8, IDLECONF7_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

impl R<u32, Reg<u32, _ALTEXCONF>>

pub fn idleconf0(&self) -> IDLECONF0_R

Bits 0:1 - ALTEX0 Idle Phase Configuration

pub fn idleconf1(&self) -> IDLECONF1_R

Bits 2:3 - ALTEX1 Idle Phase Configuration

pub fn idleconf2(&self) -> IDLECONF2_R

Bits 4:5 - ALTEX2 Idle Phase Configuration

pub fn idleconf3(&self) -> IDLECONF3_R

Bits 6:7 - ALTEX3 Idle Phase Configuration

pub fn idleconf4(&self) -> IDLECONF4_R

Bits 8:9 - ALTEX4 Idle Phase Configuration

pub fn idleconf5(&self) -> IDLECONF5_R

Bits 10:11 - ALTEX5 Idle Phase Configuration

pub fn idleconf6(&self) -> IDLECONF6_R

Bits 12:13 - ALTEX6 Idle Phase Configuration

pub fn idleconf7(&self) -> IDLECONF7_R

Bits 14:15 - ALTEX7 Idle Phase Configuration

pub fn aex0(&self) -> AEX0_R

Bit 16 - ALTEX0 Always Excite Enable

pub fn aex1(&self) -> AEX1_R

Bit 17 - ALTEX1 Always Excite Enable

pub fn aex2(&self) -> AEX2_R

Bit 18 - ALTEX2 Always Excite Enable

pub fn aex3(&self) -> AEX3_R

Bit 19 - ALTEX3 Always Excite Enable

pub fn aex4(&self) -> AEX4_R

Bit 20 - ALTEX4 Always Excite Enable

pub fn aex5(&self) -> AEX5_R

Bit 21 - ALTEX5 Always Excite Enable

pub fn aex6(&self) -> AEX6_R

Bit 22 - ALTEX6 Always Excite Enable

pub fn aex7(&self) -> AEX7_R

Bit 23 - ALTEX7 Always Excite Enable

impl R<u32, Reg<u32, _IF>>

pub fn ch0(&self) -> CH0_R

Bit 0 - CH0 Interrupt Flag

pub fn ch1(&self) -> CH1_R

Bit 1 - CH1 Interrupt Flag

pub fn ch2(&self) -> CH2_R

Bit 2 - CH2 Interrupt Flag

pub fn ch3(&self) -> CH3_R

Bit 3 - CH3 Interrupt Flag

pub fn ch4(&self) -> CH4_R

Bit 4 - CH4 Interrupt Flag

pub fn ch5(&self) -> CH5_R

Bit 5 - CH5 Interrupt Flag

pub fn ch6(&self) -> CH6_R

Bit 6 - CH6 Interrupt Flag

pub fn ch7(&self) -> CH7_R

Bit 7 - CH7 Interrupt Flag

pub fn ch8(&self) -> CH8_R

Bit 8 - CH8 Interrupt Flag

pub fn ch9(&self) -> CH9_R

Bit 9 - CH9 Interrupt Flag

pub fn ch10(&self) -> CH10_R

Bit 10 - CH10 Interrupt Flag

pub fn ch11(&self) -> CH11_R

Bit 11 - CH11 Interrupt Flag

pub fn ch12(&self) -> CH12_R

Bit 12 - CH12 Interrupt Flag

pub fn ch13(&self) -> CH13_R

Bit 13 - CH13 Interrupt Flag

pub fn ch14(&self) -> CH14_R

Bit 14 - CH14 Interrupt Flag

pub fn ch15(&self) -> CH15_R

Bit 15 - CH15 Interrupt Flag

pub fn scancomplete(&self) -> SCANCOMPLETE_R

Bit 16 - SCANCOMPLETE Interrupt Flag

pub fn dec(&self) -> DEC_R

Bit 17 - DEC Interrupt Flag

pub fn decerr(&self) -> DECERR_R

Bit 18 - DECERR Interrupt Flag

pub fn bufdatav(&self) -> BUFDATAV_R

Bit 19 - BUFDATAV Interrupt Flag

pub fn buflevel(&self) -> BUFLEVEL_R

Bit 20 - BUFLEVEL Interrupt Flag

pub fn bufof(&self) -> BUFOF_R

Bit 21 - BUFOF Interrupt Flag

pub fn cntof(&self) -> CNTOF_R

Bit 22 - CNTOF Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn ch0(&self) -> CH0_R

Bit 0 - CH0 Interrupt Enable

pub fn ch1(&self) -> CH1_R

Bit 1 - CH1 Interrupt Enable

pub fn ch2(&self) -> CH2_R

Bit 2 - CH2 Interrupt Enable

pub fn ch3(&self) -> CH3_R

Bit 3 - CH3 Interrupt Enable

pub fn ch4(&self) -> CH4_R

Bit 4 - CH4 Interrupt Enable

pub fn ch5(&self) -> CH5_R

Bit 5 - CH5 Interrupt Enable

pub fn ch6(&self) -> CH6_R

Bit 6 - CH6 Interrupt Enable

pub fn ch7(&self) -> CH7_R

Bit 7 - CH7 Interrupt Enable

pub fn ch8(&self) -> CH8_R

Bit 8 - CH8 Interrupt Enable

pub fn ch9(&self) -> CH9_R

Bit 9 - CH9 Interrupt Enable

pub fn ch10(&self) -> CH10_R

Bit 10 - CH10 Interrupt Enable

pub fn ch11(&self) -> CH11_R

Bit 11 - CH11 Interrupt Enable

pub fn ch12(&self) -> CH12_R

Bit 12 - CH12 Interrupt Enable

pub fn ch13(&self) -> CH13_R

Bit 13 - CH13 Interrupt Enable

pub fn ch14(&self) -> CH14_R

Bit 14 - CH14 Interrupt Enable

pub fn ch15(&self) -> CH15_R

Bit 15 - CH15 Interrupt Enable

pub fn scancomplete(&self) -> SCANCOMPLETE_R

Bit 16 - SCANCOMPLETE Interrupt Enable

pub fn dec(&self) -> DEC_R

Bit 17 - DEC Interrupt Enable

pub fn decerr(&self) -> DECERR_R

Bit 18 - DECERR Interrupt Enable

pub fn bufdatav(&self) -> BUFDATAV_R

Bit 19 - BUFDATAV Interrupt Enable

pub fn buflevel(&self) -> BUFLEVEL_R

Bit 20 - BUFLEVEL Interrupt Enable

pub fn bufof(&self) -> BUFOF_R

Bit 21 - BUFOF Interrupt Enable

pub fn cntof(&self) -> CNTOF_R

Bit 22 - CNTOF Interrupt Enable

impl R<u32, Reg<u32, _SYNCBUSY>>

pub fn cmd(&self) -> CMD_R

Bit 7 - CMD Register Busy

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn ch0pen(&self) -> CH0PEN_R

Bit 0 - CH0 Pin Enable

pub fn ch1pen(&self) -> CH1PEN_R

Bit 1 - CH1 Pin Enable

pub fn ch2pen(&self) -> CH2PEN_R

Bit 2 - CH2 Pin Enable

pub fn ch3pen(&self) -> CH3PEN_R

Bit 3 - CH3 Pin Enable

pub fn ch4pen(&self) -> CH4PEN_R

Bit 4 - CH4 Pin Enable

pub fn ch5pen(&self) -> CH5PEN_R

Bit 5 - CH5 Pin Enable

pub fn ch6pen(&self) -> CH6PEN_R

Bit 6 - CH6 Pin Enable

pub fn ch7pen(&self) -> CH7PEN_R

Bit 7 - CH7 Pin Enable

pub fn ch8pen(&self) -> CH8PEN_R

Bit 8 - CH8 Pin Enable

pub fn ch9pen(&self) -> CH9PEN_R

Bit 9 - CH9 Pin Enable

pub fn ch10pen(&self) -> CH10PEN_R

Bit 10 - CH10 Pin Enable

pub fn ch11pen(&self) -> CH11PEN_R

Bit 11 - CH11 Pin Enable

pub fn ch12pen(&self) -> CH12PEN_R

Bit 12 - CH12 Pin Enable

pub fn ch13pen(&self) -> CH13PEN_R

Bit 13 - CH13 Pin Enable

pub fn ch14pen(&self) -> CH14PEN_R

Bit 14 - CH14 Pin Enable

pub fn ch15pen(&self) -> CH15PEN_R

Bit 15 - CH15 Pin Enable

pub fn altex0pen(&self) -> ALTEX0PEN_R

Bit 16 - ALTEX0 Pin Enable

pub fn altex1pen(&self) -> ALTEX1PEN_R

Bit 17 - ALTEX1 Pin Enable

pub fn altex2pen(&self) -> ALTEX2PEN_R

Bit 18 - ALTEX2 Pin Enable

pub fn altex3pen(&self) -> ALTEX3PEN_R

Bit 19 - ALTEX3 Pin Enable

pub fn altex4pen(&self) -> ALTEX4PEN_R

Bit 20 - ALTEX4 Pin Enable

pub fn altex5pen(&self) -> ALTEX5PEN_R

Bit 21 - ALTEX5 Pin Enable

pub fn altex6pen(&self) -> ALTEX6PEN_R

Bit 22 - ALTEX6 Pin Enable

pub fn altex7pen(&self) -> ALTEX7PEN_R

Bit 23 - ALTEX7 Pin Enable

impl R<u32, Reg<u32, _ST0_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST0_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST1_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST1_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST2_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST2_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST3_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST3_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST4_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST4_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST5_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST5_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST6_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST6_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST7_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST7_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST8_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST8_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST9_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST9_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST10_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST10_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST11_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST11_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST12_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST12_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST13_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST13_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST14_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST14_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST15_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST15_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST16_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST16_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST17_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST17_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST18_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST18_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST19_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST19_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST20_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST20_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST21_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST21_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST22_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST22_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST23_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST23_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST24_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST24_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST25_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST25_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST26_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST26_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST27_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST27_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST28_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST28_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST29_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST29_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST30_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST30_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST31_TCONFA>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn chain(&self) -> CHAIN_R

Bit 14 - Enable State Descriptor Chaining

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag Enable

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _ST31_TCONFB>>

pub fn comp(&self) -> COMP_R

Bits 0:3 - Sensor Compare Value

pub fn mask(&self) -> MASK_R

Bits 4:7 - Sensor Mask

pub fn nextstate(&self) -> NEXTSTATE_R

Bits 8:12 - Next State Index

pub fn setif(&self) -> SETIF_R

Bit 15 - Set Interrupt Flag

pub fn prsact(&self) -> PRSACT_R

Bits 16:18 - Configure Transition Action

impl R<u32, Reg<u32, _BUF0_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _BUF1_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _BUF2_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _BUF3_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _BUF4_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _BUF5_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _BUF6_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _BUF7_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _BUF8_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _BUF9_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _BUF10_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _BUF11_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _BUF12_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _BUF13_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _BUF14_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _BUF15_DATA>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Result Buffer

pub fn datasrc(&self) -> DATASRC_R

Bits 16:19 - Result Data Source

impl R<u32, Reg<u32, _CH0_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH0_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH0_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u32, Reg<u32, _CH1_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH1_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH1_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u32, Reg<u32, _CH2_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH2_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH2_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u32, Reg<u32, _CH3_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH3_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH3_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u32, Reg<u32, _CH4_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH4_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH4_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u32, Reg<u32, _CH5_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH5_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH5_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u32, Reg<u32, _CH6_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH6_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH6_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u32, Reg<u32, _CH7_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH7_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH7_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u32, Reg<u32, _CH8_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH8_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH8_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u32, Reg<u32, _CH9_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH9_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH9_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u32, Reg<u32, _CH10_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH10_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH10_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u32, Reg<u32, _CH11_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH11_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH11_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u32, Reg<u32, _CH12_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH12_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH12_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u32, Reg<u32, _CH13_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH13_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH13_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u32, Reg<u32, _CH14_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH14_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH14_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u32, Reg<u32, _CH15_TIMING>>

pub fn extime(&self) -> EXTIME_R

Bits 0:5 - Set Excitation Time

pub fn sampledly(&self) -> SAMPLEDLY_R

Bits 6:13 - Set Sample Delay

pub fn measuredly(&self) -> MEASUREDLY_R

Bits 14:23 - Set Measure Delay

impl R<u8, SAMPLE_A>

pub fn variant(&self) -> SAMPLE_A

Get enumerated values variant

pub fn is_acmpcount(&self) -> bool

Checks if the value of the field is ACMPCOUNT

pub fn is_acmp(&self) -> bool

Checks if the value of the field is ACMP

pub fn is_adc(&self) -> bool

Checks if the value of the field is ADC

pub fn is_adcdiff(&self) -> bool

Checks if the value of the field is ADCDIFF

impl R<u8, SETIF_A>

pub fn variant(&self) -> Variant<u8, SETIF_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_level(&self) -> bool

Checks if the value of the field is LEVEL

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u8, EXMODE_A>

pub fn variant(&self) -> EXMODE_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_dacout(&self) -> bool

Checks if the value of the field is DACOUT

impl R<u32, Reg<u32, _CH15_INTERACT>>

pub fn thres(&self) -> THRES_R

Bits 0:11 - ACMP Threshold or VDAC Data

pub fn sample(&self) -> SAMPLE_R

Bits 12:13 - Select Sample Mode

pub fn setif(&self) -> SETIF_R

Bits 14:16 - Enable Interrupt Generation

pub fn exmode(&self) -> EXMODE_R

Bits 17:18 - Set GPIO Mode

pub fn exclk(&self) -> EXCLK_R

Bit 19 - Select Clock Used for Excitation Timing

pub fn sampleclk(&self) -> SAMPLECLK_R

Bit 20 - Select Clock Used for Timing of Sample Delay

pub fn altex(&self) -> ALTEX_R

Bit 21 - Use Alternative Excite Pin

impl R<u8, STRSAMPLE_A>

pub fn variant(&self) -> Variant<u8, STRSAMPLE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_datasrc(&self) -> bool

Checks if the value of the field is DATASRC

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_thres(&self) -> bool

Checks if the value of the field is THRES

pub fn is_slidingwin(&self) -> bool

Checks if the value of the field is SLIDINGWIN

pub fn is_stepdet(&self) -> bool

Checks if the value of the field is STEPDET

impl R<u32, Reg<u32, _CH15_EVAL>>

pub fn compthres(&self) -> COMPTHRES_R

Bits 0:15 - Decision Threshold for Sensor Data

pub fn comp(&self) -> COMP_R

Bit 16 - Select Mode for Threshold Comparison

pub fn decode(&self) -> DECODE_R

Bit 17 - Send Result to Decoder

pub fn strsample(&self) -> STRSAMPLE_R

Bits 18:19 - Enable Storing of Sensor Sample in Result Buffer

pub fn scanresinv(&self) -> SCANRESINV_R

Bit 20 - Enable Inversion of Result

pub fn mode(&self) -> MODE_R

Bits 21:22 - Configure Evaluation Mode

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_d8a8(&self) -> bool

Checks if the value of the field is D8A8

pub fn is_d16a16ale(&self) -> bool

Checks if the value of the field is D16A16ALE

pub fn is_d8a24ale(&self) -> bool

Checks if the value of the field is D8A24ALE

pub fn is_d16(&self) -> bool

Checks if the value of the field is D16

impl R<u8, MODE1_A>

pub fn variant(&self) -> MODE1_A

Get enumerated values variant

pub fn is_d8a8(&self) -> bool

Checks if the value of the field is D8A8

pub fn is_d16a16ale(&self) -> bool

Checks if the value of the field is D16A16ALE

pub fn is_d8a24ale(&self) -> bool

Checks if the value of the field is D8A24ALE

pub fn is_d16(&self) -> bool

Checks if the value of the field is D16

impl R<u8, MODE2_A>

pub fn variant(&self) -> MODE2_A

Get enumerated values variant

pub fn is_d8a8(&self) -> bool

Checks if the value of the field is D8A8

pub fn is_d16a16ale(&self) -> bool

Checks if the value of the field is D16A16ALE

pub fn is_d8a24ale(&self) -> bool

Checks if the value of the field is D8A24ALE

pub fn is_d16(&self) -> bool

Checks if the value of the field is D16

impl R<u8, MODE3_A>

pub fn variant(&self) -> MODE3_A

Get enumerated values variant

pub fn is_d8a8(&self) -> bool

Checks if the value of the field is D8A8

pub fn is_d16a16ale(&self) -> bool

Checks if the value of the field is D16A16ALE

pub fn is_d8a24ale(&self) -> bool

Checks if the value of the field is D8A24ALE

pub fn is_d16(&self) -> bool

Checks if the value of the field is D16

impl R<u32, Reg<u32, _CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - Mode

pub fn mode1(&self) -> MODE1_R

Bits 2:3 - Mode 1

pub fn mode2(&self) -> MODE2_R

Bits 4:5 - Mode 2

pub fn mode3(&self) -> MODE3_R

Bits 6:7 - Mode 3

pub fn bank0en(&self) -> BANK0EN_R

Bit 8 - Bank 0 Enable

pub fn bank1en(&self) -> BANK1EN_R

Bit 9 - Bank 1 Enable

pub fn bank2en(&self) -> BANK2EN_R

Bit 10 - Bank 2 Enable

pub fn bank3en(&self) -> BANK3EN_R

Bit 11 - Bank 3 Enable

pub fn noidle(&self) -> NOIDLE_R

Bit 12 - No Idle Cycle Insertion on Bank 0

pub fn noidle1(&self) -> NOIDLE1_R

Bit 13 - No Idle Cycle Insertion on Bank 1

pub fn noidle2(&self) -> NOIDLE2_R

Bit 14 - No Idle Cycle Insertion on Bank 2

pub fn noidle3(&self) -> NOIDLE3_R

Bit 15 - No Idle Cycle Insertion on Bank 3

pub fn ardyen(&self) -> ARDYEN_R

Bit 16 - ARDY Enable

pub fn ardytodis(&self) -> ARDYTODIS_R

Bit 17 - ARDY Timeout Disable

pub fn ardy1en(&self) -> ARDY1EN_R

Bit 18 - ARDY Enable for Bank 1

pub fn ardyto1dis(&self) -> ARDYTO1DIS_R

Bit 19 - ARDY Timeout Disable for Bank 1

pub fn ardy2en(&self) -> ARDY2EN_R

Bit 20 - ARDY Enable for Bank 2

pub fn ardyto2dis(&self) -> ARDYTO2DIS_R

Bit 21 - ARDY Timeout Disable for Bank 2

pub fn ardy3en(&self) -> ARDY3EN_R

Bit 22 - ARDY Enable for Bank 3

pub fn ardyto3dis(&self) -> ARDYTO3DIS_R

Bit 23 - ARDY Timeout Disable for Bank 3

pub fn bl(&self) -> BL_R

Bit 24 - Byte Lane Enable for Bank 0

pub fn bl1(&self) -> BL1_R

Bit 25 - Byte Lane Enable for Bank 1

pub fn bl2(&self) -> BL2_R

Bit 26 - Byte Lane Enable for Bank 2

pub fn bl3(&self) -> BL3_R

Bit 27 - Byte Lane Enable for Bank 3

pub fn its(&self) -> ITS_R

Bit 30 - Individual Timing Set, Line Polarity and Mode Definition Enable

pub fn altmap(&self) -> ALTMAP_R

Bit 31 - Alternative Address Map Enable

impl R<u32, Reg<u32, _ADDRTIMING>>

pub fn addrsetup(&self) -> ADDRSETUP_R

Bits 0:2 - Address Setup Time

pub fn addrhold(&self) -> ADDRHOLD_R

Bits 8:10 - Address Hold Time

pub fn halfale(&self) -> HALFALE_R

Bit 28 - Half Cycle ALE Strobe Duration Enable

impl R<u32, Reg<u32, _RDTIMING>>

pub fn rdsetup(&self) -> RDSETUP_R

Bits 0:2 - Read Setup Time

pub fn rdstrb(&self) -> RDSTRB_R

Bits 8:14 - Read Strobe Time

pub fn rdhold(&self) -> RDHOLD_R

Bits 16:18 - Read Hold Time

pub fn halfre(&self) -> HALFRE_R

Bit 28 - Half Cycle REn Strobe Duration Enable

pub fn prefetch(&self) -> PREFETCH_R

Bit 29 - Prefetch Enable

pub fn pagemode(&self) -> PAGEMODE_R

Bit 30 - Page Mode Access Enable

impl R<u32, Reg<u32, _WRTIMING>>

pub fn wrsetup(&self) -> WRSETUP_R

Bits 0:2 - Write Setup Time

pub fn wrstrb(&self) -> WRSTRB_R

Bits 8:14 - Write Strobe Time

pub fn wrhold(&self) -> WRHOLD_R

Bits 16:18 - Write Hold Time

pub fn halfwe(&self) -> HALFWE_R

Bit 28 - Half Cycle WEn Strobe Duration Enable

pub fn wbufdis(&self) -> WBUFDIS_R

Bit 29 - Write Buffer Disable

impl R<u32, Reg<u32, _POLARITY>>

pub fn cspol(&self) -> CSPOL_R

Bit 0 - Chip Select Polarity

pub fn repol(&self) -> REPOL_R

Bit 1 - Read Enable Polarity

pub fn wepol(&self) -> WEPOL_R

Bit 2 - Write Enable Polarity

pub fn alepol(&self) -> ALEPOL_R

Bit 3 - Address Latch Polarity

pub fn ardypol(&self) -> ARDYPOL_R

Bit 4 - ARDY Polarity

pub fn blpol(&self) -> BLPOL_R

Bit 5 - BL Polarity

impl R<u32, Reg<u32, _ADDRTIMING1>>

pub fn addrsetup(&self) -> ADDRSETUP_R

Bits 0:2 - Address Setup Time

pub fn addrhold(&self) -> ADDRHOLD_R

Bits 8:10 - Address Hold Time

pub fn halfale(&self) -> HALFALE_R

Bit 28 - Half Cycle ALE Strobe Duration Enable

impl R<u32, Reg<u32, _RDTIMING1>>

pub fn rdsetup(&self) -> RDSETUP_R

Bits 0:2 - Read Setup Time

pub fn rdstrb(&self) -> RDSTRB_R

Bits 8:14 - Read Strobe Time

pub fn rdhold(&self) -> RDHOLD_R

Bits 16:18 - Read Hold Time

pub fn halfre(&self) -> HALFRE_R

Bit 28 - Half Cycle REn Strobe Duration Enable

pub fn prefetch(&self) -> PREFETCH_R

Bit 29 - Prefetch Enable

pub fn pagemode(&self) -> PAGEMODE_R

Bit 30 - Page Mode Access Enable

impl R<u32, Reg<u32, _WRTIMING1>>

pub fn wrsetup(&self) -> WRSETUP_R

Bits 0:2 - Write Setup Time

pub fn wrstrb(&self) -> WRSTRB_R

Bits 8:14 - Write Strobe Time

pub fn wrhold(&self) -> WRHOLD_R

Bits 16:18 - Write Hold Time

pub fn halfwe(&self) -> HALFWE_R

Bit 28 - Half Cycle WEn Strobe Duration Enable

pub fn wbufdis(&self) -> WBUFDIS_R

Bit 29 - Write Buffer Disable

impl R<u32, Reg<u32, _POLARITY1>>

pub fn cspol(&self) -> CSPOL_R

Bit 0 - Chip Select Polarity

pub fn repol(&self) -> REPOL_R

Bit 1 - Read Enable Polarity

pub fn wepol(&self) -> WEPOL_R

Bit 2 - Write Enable Polarity

pub fn alepol(&self) -> ALEPOL_R

Bit 3 - Address Latch Polarity

pub fn ardypol(&self) -> ARDYPOL_R

Bit 4 - ARDY Polarity

pub fn blpol(&self) -> BLPOL_R

Bit 5 - BL Polarity

impl R<u32, Reg<u32, _ADDRTIMING2>>

pub fn addrsetup(&self) -> ADDRSETUP_R

Bits 0:2 - Address Setup Time

pub fn addrhold(&self) -> ADDRHOLD_R

Bits 8:10 - Address Hold Time

pub fn halfale(&self) -> HALFALE_R

Bit 28 - Half Cycle ALE Strobe Duration Enable

impl R<u32, Reg<u32, _RDTIMING2>>

pub fn rdsetup(&self) -> RDSETUP_R

Bits 0:2 - Read Setup Time

pub fn rdstrb(&self) -> RDSTRB_R

Bits 8:14 - Read Strobe Time

pub fn rdhold(&self) -> RDHOLD_R

Bits 16:18 - Read Hold Time

pub fn halfre(&self) -> HALFRE_R

Bit 28 - Half Cycle REn Strobe Duration Enable

pub fn prefetch(&self) -> PREFETCH_R

Bit 29 - Prefetch Enable

pub fn pagemode(&self) -> PAGEMODE_R

Bit 30 - Page Mode Access Enable

impl R<u32, Reg<u32, _WRTIMING2>>

pub fn wrsetup(&self) -> WRSETUP_R

Bits 0:2 - Write Setup Time

pub fn wrstrb(&self) -> WRSTRB_R

Bits 8:14 - Write Strobe Time

pub fn wrhold(&self) -> WRHOLD_R

Bits 16:18 - Write Hold Time

pub fn halfwe(&self) -> HALFWE_R

Bit 28 - Half Cycle WEn Strobe Duration Enable

pub fn wbufdis(&self) -> WBUFDIS_R

Bit 29 - Write Buffer Disable

impl R<u32, Reg<u32, _POLARITY2>>

pub fn cspol(&self) -> CSPOL_R

Bit 0 - Chip Select Polarity

pub fn repol(&self) -> REPOL_R

Bit 1 - Read Enable Polarity

pub fn wepol(&self) -> WEPOL_R

Bit 2 - Write Enable Polarity

pub fn alepol(&self) -> ALEPOL_R

Bit 3 - Address Latch Polarity

pub fn ardypol(&self) -> ARDYPOL_R

Bit 4 - ARDY Polarity

pub fn blpol(&self) -> BLPOL_R

Bit 5 - BL Polarity

impl R<u32, Reg<u32, _ADDRTIMING3>>

pub fn addrsetup(&self) -> ADDRSETUP_R

Bits 0:2 - Address Setup Time

pub fn addrhold(&self) -> ADDRHOLD_R

Bits 8:10 - Address Hold Time

pub fn halfale(&self) -> HALFALE_R

Bit 28 - Half Cycle ALE Strobe Duration Enable

impl R<u32, Reg<u32, _RDTIMING3>>

pub fn rdsetup(&self) -> RDSETUP_R

Bits 0:2 - Read Setup Time

pub fn rdstrb(&self) -> RDSTRB_R

Bits 8:14 - Read Strobe Time

pub fn rdhold(&self) -> RDHOLD_R

Bits 16:18 - Read Hold Time

pub fn halfre(&self) -> HALFRE_R

Bit 28 - Half Cycle REn Strobe Duration Enable

pub fn prefetch(&self) -> PREFETCH_R

Bit 29 - Prefetch Enable

pub fn pagemode(&self) -> PAGEMODE_R

Bit 30 - Page Mode Access Enable

impl R<u32, Reg<u32, _WRTIMING3>>

pub fn wrsetup(&self) -> WRSETUP_R

Bits 0:2 - Write Setup Time

pub fn wrstrb(&self) -> WRSTRB_R

Bits 8:14 - Write Strobe Time

pub fn wrhold(&self) -> WRHOLD_R

Bits 16:18 - Write Hold Time

pub fn halfwe(&self) -> HALFWE_R

Bit 28 - Half Cycle WEn Strobe Duration Enable

pub fn wbufdis(&self) -> WBUFDIS_R

Bit 29 - Write Buffer Disable

impl R<u32, Reg<u32, _POLARITY3>>

pub fn cspol(&self) -> CSPOL_R

Bit 0 - Chip Select Polarity

pub fn repol(&self) -> REPOL_R

Bit 1 - Read Enable Polarity

pub fn wepol(&self) -> WEPOL_R

Bit 2 - Write Enable Polarity

pub fn alepol(&self) -> ALEPOL_R

Bit 3 - Address Latch Polarity

pub fn ardypol(&self) -> ARDYPOL_R

Bit 4 - ARDY Polarity

pub fn blpol(&self) -> BLPOL_R

Bit 5 - BL Polarity

impl R<u8, PAGELEN_A>

pub fn variant(&self) -> PAGELEN_A

Get enumerated values variant

pub fn is_member4(&self) -> bool

Checks if the value of the field is MEMBER4

pub fn is_member8(&self) -> bool

Checks if the value of the field is MEMBER8

pub fn is_member16(&self) -> bool

Checks if the value of the field is MEMBER16

pub fn is_member32(&self) -> bool

Checks if the value of the field is MEMBER32

impl R<u32, Reg<u32, _PAGECTRL>>

pub fn pagelen(&self) -> PAGELEN_R

Bits 0:1 - Page Length

pub fn inchit(&self) -> INCHIT_R

Bit 4 - Intrapage Hit Only on Incremental Addresses

pub fn rdpa(&self) -> RDPA_R

Bits 8:11 - Page Read Access Time

pub fn keepopen(&self) -> KEEPOPEN_R

Bits 20:26 - Maximum Page Open Time

impl R<u8, BANKSEL_A>

pub fn variant(&self) -> BANKSEL_A

Get enumerated values variant

pub fn is_bank0(&self) -> bool

Checks if the value of the field is BANK0

pub fn is_bank1(&self) -> bool

Checks if the value of the field is BANK1

pub fn is_bank2(&self) -> bool

Checks if the value of the field is BANK2

pub fn is_bank3(&self) -> bool

Checks if the value of the field is BANK3

impl R<u32, Reg<u32, _NANDCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - NAND Flash Control Enable

pub fn banksel(&self) -> BANKSEL_R

Bits 4:5 - NAND Flash Bank

impl R<u32, Reg<u32, _STATUS>>

pub fn ahbact(&self) -> AHBACT_R

Bit 0 - EBI Busy With AHB Transaction

pub fn eccact(&self) -> ECCACT_R

Bit 4 - EBI ECC Generation Active

pub fn tftpixel0empty(&self) -> TFTPIXEL0EMPTY_R

Bit 8 - EBI_TFTPIXEL0 is Empty

pub fn tftpixel1empty(&self) -> TFTPIXEL1EMPTY_R

Bit 9 - EBI_TFTPIXEL1 is Empty

pub fn tftpixelfull(&self) -> TFTPIXELFULL_R

Bit 10 - EBI_TFTPIXEL0 is Full

pub fn ddact(&self) -> DDACT_R

Bit 12 - EBI Busy With Direct Drive Transactions

pub fn tftddempty(&self) -> TFTDDEMPTY_R

Bit 13 - EBI_TFTDD Register is Empty

impl R<u32, Reg<u32, _ECCPARITY>>

pub fn eccparity(&self) -> ECCPARITY_R

Bits 0:31 - ECC Parity Data

impl R<u8, DD_A>

pub fn variant(&self) -> Variant<u8, DD_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_internal(&self) -> bool

Checks if the value of the field is INTERNAL

pub fn is_external(&self) -> bool

Checks if the value of the field is EXTERNAL

impl R<u8, MASKBLEND_A>

pub fn variant(&self) -> Variant<u8, MASKBLEND_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_imask(&self) -> bool

Checks if the value of the field is IMASK

pub fn is_ialpha(&self) -> bool

Checks if the value of the field is IALPHA

pub fn is_imaskalpha(&self) -> bool

Checks if the value of the field is IMASKALPHA

pub fn is_efbmask(&self) -> bool

Checks if the value of the field is EFBMASK

pub fn is_efbalpha(&self) -> bool

Checks if the value of the field is EFBALPHA

pub fn is_efbmaskalpha(&self) -> bool

Checks if the value of the field is EFBMASKALPHA

pub fn is_ifbmask(&self) -> bool

Checks if the value of the field is IFBMASK

pub fn is_ifbalpha(&self) -> bool

Checks if the value of the field is IFBALPHA

pub fn is_ifbmaskalpha(&self) -> bool

Checks if the value of the field is IFBMASKALPHA

impl R<u8, INTERLEAVE_A>

pub fn variant(&self) -> Variant<u8, INTERLEAVE_A>

Get enumerated values variant

pub fn is_unlimited(&self) -> bool

Checks if the value of the field is UNLIMITED

pub fn is_oneperdclk(&self) -> bool

Checks if the value of the field is ONEPERDCLK

pub fn is_porch(&self) -> bool

Checks if the value of the field is PORCH

impl R<u8, WIDTH_A>

pub fn variant(&self) -> Variant<u8, WIDTH_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

impl R<u8, BANKSEL_A>

pub fn variant(&self) -> BANKSEL_A

Get enumerated values variant

pub fn is_bank0(&self) -> bool

Checks if the value of the field is BANK0

pub fn is_bank1(&self) -> bool

Checks if the value of the field is BANK1

pub fn is_bank2(&self) -> bool

Checks if the value of the field is BANK2

pub fn is_bank3(&self) -> bool

Checks if the value of the field is BANK3

impl R<u8, ALIASBANK_A>

pub fn variant(&self) -> ALIASBANK_A

Get enumerated values variant

pub fn is_aliasbank0(&self) -> bool

Checks if the value of the field is ALIASBANK0

pub fn is_aliasbank1(&self) -> bool

Checks if the value of the field is ALIASBANK1

pub fn is_aliasbank2(&self) -> bool

Checks if the value of the field is ALIASBANK2

pub fn is_aliasbank3(&self) -> bool

Checks if the value of the field is ALIASBANK3

impl R<u32, Reg<u32, _TFTCTRL>>

pub fn dd(&self) -> DD_R

Bits 0:1 - TFT Direct Drive Mode

pub fn maskblend(&self) -> MASKBLEND_R

Bits 2:5 - TFT Mask and Blend Mode

pub fn shiftdclken(&self) -> SHIFTDCLKEN_R

Bit 8 - TFT EBI_DCLK Shift Enable

pub fn fbctrig(&self) -> FBCTRIG_R

Bit 9 - TFT Frame Base Copy Trigger

pub fn interleave(&self) -> INTERLEAVE_R

Bits 10:11 - Interleave Mode

pub fn color1src(&self) -> COLOR1SRC_R

Bit 12 - Masking/Alpha Blending Color1 Source

pub fn width(&self) -> WIDTH_R

Bits 16:17 - TFT Transaction Width

pub fn aliasbanken(&self) -> ALIASBANKEN_R

Bit 19 - Alias to Graphics Bank Enable

pub fn banksel(&self) -> BANKSEL_R

Bits 20:21 - Graphics Bank

pub fn aliasbank(&self) -> ALIASBANK_R

Bits 22:23 - Graphic Bank Select Aliasing

impl R<u32, Reg<u32, _TFTSTATUS>>

pub fn hcnt(&self) -> HCNT_R

Bits 0:10 - Horizontal Count

pub fn vcnt(&self) -> VCNT_R

Bits 16:30 - Vertical Count

impl R<u8, PIXEL0FORMAT_A>

pub fn variant(&self) -> PIXEL0FORMAT_A

Get enumerated values variant

pub fn is_argb0555(&self) -> bool

Checks if the value of the field is ARGB0555

pub fn is_argb0565(&self) -> bool

Checks if the value of the field is ARGB0565

pub fn is_argb0666(&self) -> bool

Checks if the value of the field is ARGB0666

pub fn is_argb0888(&self) -> bool

Checks if the value of the field is ARGB0888

pub fn is_argb5555(&self) -> bool

Checks if the value of the field is ARGB5555

pub fn is_argb6565(&self) -> bool

Checks if the value of the field is ARGB6565

pub fn is_argb6666(&self) -> bool

Checks if the value of the field is ARGB6666

pub fn is_argb8888(&self) -> bool

Checks if the value of the field is ARGB8888

impl R<u8, PIXEL1FORMAT_A>

pub fn variant(&self) -> PIXEL1FORMAT_A

Get enumerated values variant

pub fn is_rgb555(&self) -> bool

Checks if the value of the field is RGB555

pub fn is_rgb565(&self) -> bool

Checks if the value of the field is RGB565

pub fn is_rgb666(&self) -> bool

Checks if the value of the field is RGB666

pub fn is_rgb888(&self) -> bool

Checks if the value of the field is RGB888

impl R<u32, Reg<u32, _TFTCOLORFORMAT>>

pub fn pixel0format(&self) -> PIXEL0FORMAT_R

Bits 0:2 - Sprite Pixel Color Format

pub fn pixel1format(&self) -> PIXEL1FORMAT_R

Bits 8:9 - Source and Destination Pixel Color Format

impl R<u32, Reg<u32, _TFTFRAMEBASE>>

pub fn framebase(&self) -> FRAMEBASE_R

Bits 0:27 - Frame Base Address

impl R<u32, Reg<u32, _TFTSTRIDE>>

pub fn hstride(&self) -> HSTRIDE_R

Bits 0:11 - Horizontal Stride

impl R<u32, Reg<u32, _TFTSIZE>>

pub fn hsz(&self) -> HSZ_R

Bits 0:9 - Horizontal Size (excluding Porches)

pub fn vsz(&self) -> VSZ_R

Bits 16:25 - Vertical Size (excluding Porches)

impl R<u32, Reg<u32, _TFTHPORCH>>

pub fn hsync(&self) -> HSYNC_R

Bits 0:6 - Horizontal Synchronization Pulse Width

pub fn hfporch(&self) -> HFPORCH_R

Bits 8:15 - Horizontal Front Porch Size

pub fn hbporch(&self) -> HBPORCH_R

Bits 18:25 - Horizontal Back Porch Size

pub fn hsyncstart(&self) -> HSYNCSTART_R

Bits 28:29 - HSYNC Start Delay

impl R<u32, Reg<u32, _TFTVPORCH>>

pub fn vsync(&self) -> VSYNC_R

Bits 0:6 - Vertical Synchronization Pulse Width

pub fn vfporch(&self) -> VFPORCH_R

Bits 8:19 - Vertical Front Porch Size

pub fn vbporch(&self) -> VBPORCH_R

Bits 20:31 - Vertical Back Porch Size

impl R<u32, Reg<u32, _TFTTIMING>>

pub fn dclkperiod(&self) -> DCLKPERIOD_R

Bits 0:11 - TFT Direct Drive Transaction (EBI_DCLK) Period

pub fn tftstart(&self) -> TFTSTART_R

Bits 12:23 - TFT Direct Drive Transaction Start

pub fn tftsetup(&self) -> TFTSETUP_R

Bits 24:26 - TFT Setup Time

pub fn tfthold(&self) -> TFTHOLD_R

Bits 28:30 - TFT Hold Time

impl R<u32, Reg<u32, _TFTPOLARITY>>

pub fn cspol(&self) -> CSPOL_R

Bit 0 - TFT Chip Select Polarity

pub fn dclkpol(&self) -> DCLKPOL_R

Bit 1 - TFT DCLK Polarity

pub fn dataenpol(&self) -> DATAENPOL_R

Bit 2 - TFT DATAEN Polarity

pub fn hsyncpol(&self) -> HSYNCPOL_R

Bit 3 - Address Latch Polarity

pub fn vsyncpol(&self) -> VSYNCPOL_R

Bit 4 - VSYNC Polarity

impl R<u32, Reg<u32, _TFTDD>>

pub fn data(&self) -> DATA_R

Bits 0:23 - TFT Direct Drive Data From Internal Memory

impl R<u32, Reg<u32, _TFTALPHA>>

pub fn alpha(&self) -> ALPHA_R

Bits 0:8 - TFT Alpha Blending Factor

impl R<u32, Reg<u32, _TFTPIXEL0>>

pub fn data(&self) -> DATA_R

Bits 0:23 - RGB Data

impl R<u32, Reg<u32, _TFTPIXEL1>>

pub fn data(&self) -> DATA_R

Bits 0:23 - RGB Data

impl R<u32, Reg<u32, _TFTPIXEL>>

pub fn data(&self) -> DATA_R

Bits 0:23 - Alpha Blending Result

impl R<u32, Reg<u32, _TFTMASK>>

pub fn tftmask(&self) -> TFTMASK_R

Bits 0:23 - TFT Mask Value

impl R<u32, Reg<u32, _IF>>

pub fn vsync(&self) -> VSYNC_R

Bit 0 - Vertical Sync Interrupt Flag

pub fn hsync(&self) -> HSYNC_R

Bit 1 - Horizontal Sync Interrupt Flag

pub fn vbporch(&self) -> VBPORCH_R

Bit 2 - Vertical Back Porch Interrupt Flag

pub fn vfporch(&self) -> VFPORCH_R

Bit 3 - Vertical Front Porch Interrupt Flag

pub fn ddempty(&self) -> DDEMPTY_R

Bit 4 - Direct Drive Data Empty Interrupt Flag

pub fn ddjit(&self) -> DDJIT_R

Bit 5 - Direct Drive Jitter Interrupt Flag

pub fn tftpixel0empty(&self) -> TFTPIXEL0EMPTY_R

Bit 6 - EBI_TFTPIXEL0 is Empty Interrupt Flag

pub fn tftpixel1empty(&self) -> TFTPIXEL1EMPTY_R

Bit 7 - EBI_TFTPIXEL1 is Empty Interrupt Flag

pub fn tftpixelfull(&self) -> TFTPIXELFULL_R

Bit 8 - EBI_TFTPIXEL is Full Interrupt Flag

pub fn tftpixelof(&self) -> TFTPIXELOF_R

Bit 9 - EBI_TFTPIXEL Register Overflow Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn vsync(&self) -> VSYNC_R

Bit 0 - Vertical Sync Interrupt Enable

pub fn hsync(&self) -> HSYNC_R

Bit 1 - Horizontal Sync Interrupt Enable

pub fn vbporch(&self) -> VBPORCH_R

Bit 2 - Vertical Back Porch Interrupt Enable

pub fn vfporch(&self) -> VFPORCH_R

Bit 3 - Vertical Front Porch Interrupt Enable

pub fn ddempty(&self) -> DDEMPTY_R

Bit 4 - Direct Drive Data Empty Interrupt Enable

pub fn ddjit(&self) -> DDJIT_R

Bit 5 - Direct Drive Jitter Interrupt Enable

pub fn tftpixel0empty(&self) -> TFTPIXEL0EMPTY_R

Bit 6 - EBI_TFTPIXEL0 Empty Interrupt Enable

pub fn tftpixel1empty(&self) -> TFTPIXEL1EMPTY_R

Bit 7 - EBI_TFTPIXEL1 Empty Interrupt Enable

pub fn tftpixelfull(&self) -> TFTPIXELFULL_R

Bit 8 - EBI_TFTPIXEL Full Interrupt Enable

pub fn tftpixelof(&self) -> TFTPIXELOF_R

Bit 9 - EBI_TFTPIXEL Overflow Interrupt Enable

impl R<u8, ALB_A>

pub fn variant(&self) -> ALB_A

Get enumerated values variant

pub fn is_a0(&self) -> bool

Checks if the value of the field is A0

pub fn is_a8(&self) -> bool

Checks if the value of the field is A8

pub fn is_a16(&self) -> bool

Checks if the value of the field is A16

pub fn is_a24(&self) -> bool

Checks if the value of the field is A24

impl R<u8, APEN_A>

pub fn variant(&self) -> Variant<u8, APEN_A>

Get enumerated values variant

pub fn is_a0(&self) -> bool

Checks if the value of the field is A0

pub fn is_a5(&self) -> bool

Checks if the value of the field is A5

pub fn is_a6(&self) -> bool

Checks if the value of the field is A6

pub fn is_a7(&self) -> bool

Checks if the value of the field is A7

pub fn is_a8(&self) -> bool

Checks if the value of the field is A8

pub fn is_a9(&self) -> bool

Checks if the value of the field is A9

pub fn is_a10(&self) -> bool

Checks if the value of the field is A10

pub fn is_a11(&self) -> bool

Checks if the value of the field is A11

pub fn is_a12(&self) -> bool

Checks if the value of the field is A12

pub fn is_a13(&self) -> bool

Checks if the value of the field is A13

pub fn is_a14(&self) -> bool

Checks if the value of the field is A14

pub fn is_a15(&self) -> bool

Checks if the value of the field is A15

pub fn is_a16(&self) -> bool

Checks if the value of the field is A16

pub fn is_a17(&self) -> bool

Checks if the value of the field is A17

pub fn is_a18(&self) -> bool

Checks if the value of the field is A18

pub fn is_a19(&self) -> bool

Checks if the value of the field is A19

pub fn is_a20(&self) -> bool

Checks if the value of the field is A20

pub fn is_a21(&self) -> bool

Checks if the value of the field is A21

pub fn is_a22(&self) -> bool

Checks if the value of the field is A22

pub fn is_a23(&self) -> bool

Checks if the value of the field is A23

pub fn is_a24(&self) -> bool

Checks if the value of the field is A24

pub fn is_a25(&self) -> bool

Checks if the value of the field is A25

pub fn is_a26(&self) -> bool

Checks if the value of the field is A26

pub fn is_a27(&self) -> bool

Checks if the value of the field is A27

pub fn is_a28(&self) -> bool

Checks if the value of the field is A28

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn ebipen(&self) -> EBIPEN_R

Bit 0 - EBI Pin Enable

pub fn cs0pen(&self) -> CS0PEN_R

Bit 1 - EBI_CS0 Pin Enable

pub fn cs1pen(&self) -> CS1PEN_R

Bit 2 - EBI_CS1 Pin Enable

pub fn cs2pen(&self) -> CS2PEN_R

Bit 3 - EBI_CS2 Pin Enable

pub fn cs3pen(&self) -> CS3PEN_R

Bit 4 - EBI_CS3 Pin Enable

pub fn alepen(&self) -> ALEPEN_R

Bit 5 - EBI_ALE Pin Enable

pub fn ardypen(&self) -> ARDYPEN_R

Bit 6 - EBI_ARDY Pin Enable

pub fn blpen(&self) -> BLPEN_R

Bit 7 - EBI_BL[1:0] Pin Enable

pub fn nandpen(&self) -> NANDPEN_R

Bit 12 - NANDRE and NANDWE Pin Enable

pub fn alb(&self) -> ALB_R

Bits 16:17 - Sets the Lower Bound for EBI_A Enabling

pub fn apen(&self) -> APEN_R

Bits 18:22 - EBI_A Pin Enable

pub fn tftpen(&self) -> TFTPEN_R

Bit 24 - EBI_TFT Pin Enable

pub fn dataenpen(&self) -> DATAENPEN_R

Bit 25 - EBI_DATA Pin Enable

pub fn cstftpen(&self) -> CSTFTPEN_R

Bit 26 - EBI_CSTFT Pin Enable

impl R<u8, EBILOC_A>

pub fn variant(&self) -> Variant<u8, EBILOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

impl R<u8, CSLOC_A>

pub fn variant(&self) -> Variant<u8, CSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, NANDLOC_A>

pub fn variant(&self) -> Variant<u8, NANDLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

impl R<u8, TFTLOC_A>

pub fn variant(&self) -> Variant<u8, TFTLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn ebiloc(&self) -> EBILOC_R

Bits 0:5 - I/O Location

pub fn csloc(&self) -> CSLOC_R

Bits 8:13 - I/O Location

pub fn nandloc(&self) -> NANDLOC_R

Bits 16:21 - I/O Location

pub fn tftloc(&self) -> TFTLOC_R

Bits 24:29 - I/O Location

impl R<u8, ADLOC_A>

pub fn variant(&self) -> Variant<u8, ADLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, ALOC_A>

pub fn variant(&self) -> Variant<u8, ALOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

impl R<u8, RDYLOC_A>

pub fn variant(&self) -> Variant<u8, RDYLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

impl R<u32, Reg<u32, _ROUTELOC1>>

pub fn adloc(&self) -> ADLOC_R

Bits 0:5 - I/O Location

pub fn aloc(&self) -> ALOC_R

Bits 8:13 - I/O Location

pub fn rdyloc(&self) -> RDYLOC_R

Bits 16:21 - I/O Location

impl R<u32, Reg<u32, _NETWORKCTRL>>

pub fn loopbacklocal(&self) -> LOOPBACKLOCAL_R

Bit 1 - Loopback local

pub fn enbrx(&self) -> ENBRX_R

Bit 2 - Receive enable

pub fn enbtx(&self) -> ENBTX_R

Bit 3 - Transmit enable

pub fn manporten(&self) -> MANPORTEN_R

Bit 4 - Management port enable

pub fn clrallstatsregs(&self) -> CLRALLSTATSREGS_R

Bit 5 - Clear statistics registers

pub fn incallstatsregs(&self) -> INCALLSTATSREGS_R

Bit 6 - Incremental statistics registers

pub fn statswren(&self) -> STATSWREN_R

Bit 7 - Write enable for statistics registers

pub fn backpressure(&self) -> BACKPRESSURE_R

Bit 8 - Back pressure will force collisions on all received frames

pub fn txstrt(&self) -> TXSTRT_R

Bit 9 - Start transmission

pub fn txhalt(&self) -> TXHALT_R

Bit 10 - Transmit halt

pub fn txpfrmreq(&self) -> TXPFRMREQ_R

Bit 11 - Transmit pause frame

pub fn txpfrmzero(&self) -> TXPFRMZERO_R

Bit 12 - Transmit zero quantum pause frame

pub fn storerxts(&self) -> STORERXTS_R

Bit 15 - Store receive time stamp to memory.

pub fn pfcenb(&self) -> PFCENB_R

Bit 16 - Enable PFC Priority Based Pause Reception capabilities.

pub fn txpfcpriorpfrm(&self) -> TXPFCPRIORPFRM_R

Bit 17 - Write a one to transmit PFC priority based pause frame.

pub fn flushrxpkt(&self) -> FLUSHRXPKT_R

Bit 18 - Flush the next packet from the external RX DPRAM.

pub fn txlpien(&self) -> TXLPIEN_R

Bit 19 - Enable LPI transmission when set LPI (low power idle) is immediately transmitted.

pub fn ptpunicasten(&self) -> PTPUNICASTEN_R

Bit 20 - Enable detection of unicast PTP unicast frames.

pub fn storeudpoffset(&self) -> STOREUDPOFFSET_R

Bit 22 - Store UDP / TCP offset to memory.

pub fn onestepsyncmode(&self) -> ONESTEPSYNCMODE_R

Bit 24 - 1588 One Step Sync Mode.

pub fn pfcctrl(&self) -> PFCCTRL_R

Bit 25 - Enable multiple PFC pause quantums, one per pause priority

impl R<u8, MDCCLKDIV_A>

pub fn variant(&self) -> MDCCLKDIV_A

Get enumerated values variant

pub fn is_divby8(&self) -> bool

Checks if the value of the field is DIVBY8

pub fn is_divby16(&self) -> bool

Checks if the value of the field is DIVBY16

pub fn is_divby32(&self) -> bool

Checks if the value of the field is DIVBY32

pub fn is_divby48(&self) -> bool

Checks if the value of the field is DIVBY48

pub fn is_divby64(&self) -> bool

Checks if the value of the field is DIVBY64

pub fn is_divby96(&self) -> bool

Checks if the value of the field is DIVBY96

pub fn is_divby128(&self) -> bool

Checks if the value of the field is DIVBY128

pub fn is_divby224(&self) -> bool

Checks if the value of the field is DIVBY224

impl R<u32, Reg<u32, _NETWORKCFG>>

pub fn speed(&self) -> SPEED_R

Bit 0 - Speed

pub fn fullduplex(&self) -> FULLDUPLEX_R

Bit 1 - Full duplex

pub fn discrdnonvlanframes(&self) -> DISCRDNONVLANFRAMES_R

Bit 2 - Discard non-VLAN frames

pub fn jumboframes(&self) -> JUMBOFRAMES_R

Bit 3 - Jumbo frames enable

pub fn copyallframes(&self) -> COPYALLFRAMES_R

Bit 4 - Copy all frames

pub fn nobroadcast(&self) -> NOBROADCAST_R

Bit 5 - No broadcast

pub fn multicasthashen(&self) -> MULTICASTHASHEN_R

Bit 6 - Multicast hash enable

pub fn unicasthashen(&self) -> UNICASTHASHEN_R

Bit 7 - Unicast hash enable

pub fn rx1536byteframes(&self) -> RX1536BYTEFRAMES_R

Bit 8 - Receive 1536 byte frames

pub fn retrytest(&self) -> RETRYTEST_R

Bit 12 - Retry test

pub fn pauseen(&self) -> PAUSEEN_R

Bit 13 - Pause enable

pub fn rxbuffoffset(&self) -> RXBUFFOFFSET_R

Bits 14:15 - Receive buffer offset

pub fn lenfielderrfrmdiscrd(&self) -> LENFIELDERRFRMDISCRD_R

Bit 16 - Length field error frame discard

pub fn fcsremove(&self) -> FCSREMOVE_R

Bit 17 - FCS remove

pub fn mdcclkdiv(&self) -> MDCCLKDIV_R

Bits 18:20 - MDC clock division

pub fn discopyofpframes(&self) -> DISCOPYOFPFRAMES_R

Bit 23 - Disable copy of pause frames

pub fn rxchksumoffloaden(&self) -> RXCHKSUMOFFLOADEN_R

Bit 24 - Receive checksum offload enable

pub fn enhalfduplexrx(&self) -> ENHALFDUPLEXRX_R

Bit 25 - Enable frames to be received in half-duplex mode while transmitting.

pub fn ignorerxfcs(&self) -> IGNORERXFCS_R

Bit 26 - Ignore RX FCS

pub fn ipgstrtchen(&self) -> IPGSTRTCHEN_R

Bit 28 - IPG stretch enable

pub fn nspchange(&self) -> NSPCHANGE_R

Bit 29 - Receive bad preamble.

pub fn ignoreipgrxer(&self) -> IGNOREIPGRXER_R

Bit 30 - Ignore IPG rx_er.

impl R<u32, Reg<u32, _NETWORKSTATUS>>

pub fn mdioin(&self) -> MDIOIN_R

Bit 1 - Returns status of the mdio_in pin.

pub fn mandone(&self) -> MANDONE_R

Bit 2 - The PHY management logic is idle (i.e. has completed).

pub fn pfcnegotiate(&self) -> PFCNEGOTIATE_R

Bit 6 - Set when PFC Priority Based Pause has been negotiated.

pub fn lpiindicate(&self) -> LPIINDICATE_R

Bit 7 - LPI Indication

impl R<u8, RXPBUFSIZE_A>

pub fn variant(&self) -> RXPBUFSIZE_A

Get enumerated values variant

pub fn is_size0(&self) -> bool

Checks if the value of the field is SIZE0

pub fn is_size1(&self) -> bool

Checks if the value of the field is SIZE1

pub fn is_size2(&self) -> bool

Checks if the value of the field is SIZE2

pub fn is_size3(&self) -> bool

Checks if the value of the field is SIZE3

impl R<u32, Reg<u32, _DMACFG>>

pub fn ambabrstlen(&self) -> AMBABRSTLEN_R

Bits 0:4 - Selects the burst length to use on the AMBA (AHB) when transferring frame data.

pub fn hdrdataspliten(&self) -> HDRDATASPLITEN_R

Bit 5 - Enable header data Splitting.

pub fn rxpbufsize(&self) -> RXPBUFSIZE_R

Bits 8:9 - Receiver packet buffer memory size select.

pub fn txpbufsize(&self) -> TXPBUFSIZE_R

Bit 10 - Transmitter packet buffer memory size select.

pub fn txpbuftcpen(&self) -> TXPBUFTCPEN_R

Bit 11 - Transmitter IP, TCP and UDP checksum generation offload enable

pub fn inflastdbufsizeen(&self) -> INFLASTDBUFSIZEEN_R

Bit 12 - Forces the DMA

pub fn rxbufsize(&self) -> RXBUFSIZE_R

Bits 16:23 - DMA receive buffer size in external AMBA (AHB) system memory.

pub fn frcdiscardonerr(&self) -> FRCDISCARDONERR_R

Bit 24 - Auto Discard RX pkts during lack of resource.

pub fn frcmaxambabrstrx(&self) -> FRCMAXAMBABRSTRX_R

Bit 25 - Force max length bursts on RX.

pub fn frcmaxambabrsttx(&self) -> FRCMAXAMBABRSTTX_R

Bit 26 - Force max length bursts on TX.

pub fn rxbdextndmodeen(&self) -> RXBDEXTNDMODEEN_R

Bit 28 - Enable RX extended BD mode.

pub fn txbdextendmodeen(&self) -> TXBDEXTENDMODEEN_R

Bit 29 - Enable TX extended BD mode.

impl R<u32, Reg<u32, _TXSTATUS>>

pub fn usedbitread(&self) -> USEDBITREAD_R

Bit 0 - Used bit read

pub fn coloccrd(&self) -> COLOCCRD_R

Bit 1 - Collision occurred

pub fn retrylmtexcd(&self) -> RETRYLMTEXCD_R

Bit 2 - Retry limit exceeded

pub fn txgo(&self) -> TXGO_R

Bit 3 - Transmit go

pub fn ambaerr(&self) -> AMBAERR_R

Bit 4 - Transmit frame corruption due to AMBA (AHB) errors.

pub fn txcmplt(&self) -> TXCMPLT_R

Bit 5 - Transmit complete

pub fn txunderrun(&self) -> TXUNDERRUN_R

Bit 6 - Transmit under run

pub fn latecoloccrd(&self) -> LATECOLOCCRD_R

Bit 7 - Late collision occurred

pub fn respnotok(&self) -> RESPNOTOK_R

Bit 8 - bresp/hresp not OK

impl R<u32, Reg<u32, _RXQPTR>>

pub fn dmarxqptr(&self) -> DMARXQPTR_R

Bits 2:31 - Receive buffer queue base address

impl R<u32, Reg<u32, _TXQPTR>>

pub fn dmatxqptr(&self) -> DMATXQPTR_R

Bits 2:31 - Transmit buffer queue base address

impl R<u32, Reg<u32, _RXSTATUS>>

pub fn buffnotavail(&self) -> BUFFNOTAVAIL_R

Bit 0 - Buffer not available

pub fn frmrx(&self) -> FRMRX_R

Bit 1 - Frame received

pub fn rxoverrun(&self) -> RXOVERRUN_R

Bit 2 - Receive overrun

pub fn respnotok(&self) -> RESPNOTOK_R

Bit 3 - bresp/hresp not OK

impl R<u32, Reg<u32, _IFCR>>

pub fn mngmntdone(&self) -> MNGMNTDONE_R

Bit 0 - Management frame sent

pub fn rxcmplt(&self) -> RXCMPLT_R

Bit 1 - Receive complete

pub fn rxusedbitread(&self) -> RXUSEDBITREAD_R

Bit 2 - RX used bit read

pub fn txusedbitread(&self) -> TXUSEDBITREAD_R

Bit 3 - TX used bit read

pub fn txunderrun(&self) -> TXUNDERRUN_R

Bit 4 - Transmit under run

pub fn rtrylmtorlatecol(&self) -> RTRYLMTORLATECOL_R

Bit 5 - Retry limit exceeded or late collision

pub fn ambaerr(&self) -> AMBAERR_R

Bit 6 - Transmit frame corruption due to AMBA (AHB) error.

pub fn txcmplt(&self) -> TXCMPLT_R

Bit 7 - Transmit complete

pub fn rxoverrun(&self) -> RXOVERRUN_R

Bit 10 - Receive overrun

pub fn respnotok(&self) -> RESPNOTOK_R

Bit 11 - Hresp not OK

pub fn nonzeropfrmquant(&self) -> NONZEROPFRMQUANT_R

Bit 12 - Pause frame with non-zero pause quantum received

pub fn pausetimezero(&self) -> PAUSETIMEZERO_R

Bit 13 - Pause Time zero

pub fn pfrmtx(&self) -> PFRMTX_R

Bit 14 - Pause frame transmitted

pub fn ptpdlyreqfrmrx(&self) -> PTPDLYREQFRMRX_R

Bit 18 - PTP delay_req frame received

pub fn ptpsyncfrmrx(&self) -> PTPSYNCFRMRX_R

Bit 19 - PTP sync frame received

pub fn ptpdlyreqfrmtx(&self) -> PTPDLYREQFRMTX_R

Bit 20 - PTP delay_req frame transmitted

pub fn ptpsyncfrmtx(&self) -> PTPSYNCFRMTX_R

Bit 21 - PTP sync frame transmitted

pub fn ptppdlyreqfrmrx(&self) -> PTPPDLYREQFRMRX_R

Bit 22 - PTP pdelay_req frame received

pub fn ptppdlyrespfrmrx(&self) -> PTPPDLYRESPFRMRX_R

Bit 23 - PTP pdelay_resp frame received

pub fn ptppdlyreqfrmtx(&self) -> PTPPDLYREQFRMTX_R

Bit 24 - PTP pdelay_req frame transmitted

pub fn ptppdlyrespfrmtx(&self) -> PTPPDLYRESPFRMTX_R

Bit 25 - PTP pdelay_resp frame transmitted

pub fn tsusecregincr(&self) -> TSUSECREGINCR_R

Bit 26 - TSU seconds register increment

pub fn rxlpiindc(&self) -> RXLPIINDC_R

Bit 27 - Receive LPI indication status bit change

pub fn wolevntrx(&self) -> WOLEVNTRX_R

Bit 28 - WOL event received interrupt.

pub fn tsutimercomp(&self) -> TSUTIMERCOMP_R

Bit 29 - TSU timer comparison interrupt.

impl R<u32, Reg<u32, _IENRO>>

pub fn mngmntdone(&self) -> MNGMNTDONE_R

Bit 0 - management done interrupt mask

pub fn rxcmplt(&self) -> RXCMPLT_R

Bit 1 - receive complete interrupt mask

pub fn rxusedbitread(&self) -> RXUSEDBITREAD_R

Bit 2 - receive used bit read interrupt mask

pub fn txusedbitread(&self) -> TXUSEDBITREAD_R

Bit 3 - transmit used bit read interrupt mask

pub fn txunderrun(&self) -> TXUNDERRUN_R

Bit 4 - transmit buffer under run interrupt mask

pub fn rtrylmtorlatecol(&self) -> RTRYLMTORLATECOL_R

Bit 5 - Retry limit exceeded or late collision (gigabit mode only) interrupt mask

pub fn ambaerr(&self) -> AMBAERR_R

Bit 6 - Transmit frame corruption due to AMBA (AHB) error interrupt mask

pub fn txcmplt(&self) -> TXCMPLT_R

Bit 7 - Transmit complete interrupt mask

pub fn unused(&self) -> UNUSED_R

Bit 8 - Unused

pub fn rxoverrun(&self) -> RXOVERRUN_R

Bit 10 - Receive overrun interrupt mask

pub fn respnotok(&self) -> RESPNOTOK_R

Bit 11 - bresp/hresp not OK interrupt mask

pub fn nonzeropfrmquant(&self) -> NONZEROPFRMQUANT_R

Bit 12 - Pause frame with non-zero pause quantum interrupt mask

pub fn pausetimezero(&self) -> PAUSETIMEZERO_R

Bit 13 - pause time zero interrupt mask

pub fn pfrmtx(&self) -> PFRMTX_R

Bit 14 - pause frame transmitted interrupt mask

pub fn ptpdlyreqfrmrx(&self) -> PTPDLYREQFRMRX_R

Bit 18 - PTP delay_req frame received mask

pub fn ptpsyncfrmrx(&self) -> PTPSYNCFRMRX_R

Bit 19 - PTP sync frame received mask

pub fn ptpdlyreqfrmtx(&self) -> PTPDLYREQFRMTX_R

Bit 20 - PTP delay_req frame transmitted mask

pub fn ptpsyncfrmtx(&self) -> PTPSYNCFRMTX_R

Bit 21 - PTP sync frame transmitted mask

pub fn ptppdlyreqfrmrx(&self) -> PTPPDLYREQFRMRX_R

Bit 22 - PTP pdelay_req frame received mask

pub fn ptppdlyrespfrmrx(&self) -> PTPPDLYRESPFRMRX_R

Bit 23 - PTP pdelay_resp frame received mask

pub fn ptppdlyreqfrmtx(&self) -> PTPPDLYREQFRMTX_R

Bit 24 - PTP pdelay_req frame transmitted mask

pub fn ptppdlyrespfrmtx(&self) -> PTPPDLYRESPFRMTX_R

Bit 25 - PTP pdelay_resp frame transmitted mask

pub fn tsusecregincr(&self) -> TSUSECREGINCR_R

Bit 26 - TSU seconds register increment mask

pub fn rxlpiindc(&self) -> RXLPIINDC_R

Bit 27 - RX LPI indication mask

pub fn wolevntrx(&self) -> WOLEVNTRX_R

Bit 28 - WOL event received mask

pub fn tsutimercomp(&self) -> TSUTIMERCOMP_R

Bit 29 - TSU timer comparison interrupt mask.

impl R<u32, Reg<u32, _PHYMNGMNT>>

pub fn phyrwdata(&self) -> PHYRWDATA_R

Bits 0:15 - PHY read write data

pub fn write10(&self) -> WRITE10_R

Bits 16:17 - Must be written with 10.

pub fn regaddr(&self) -> REGADDR_R

Bits 18:22 - Register address - specifies the register in the PHY to access.

pub fn phyaddr(&self) -> PHYADDR_R

Bits 23:27 - PHY address.

pub fn operation(&self) -> OPERATION_R

Bits 28:29 - Operation. For a Clause 45 frame: 00 is an addr, 01 is a write, 10 is a post read increment, 11 is a read frame. For a Clause 22 frame: 10 is a read, 01 is a write.

pub fn write1(&self) -> WRITE1_R

Bit 30 - Must be written to 1 for a valid Clause 22 frame and to 0 for a valid Clause 45 frame.

pub fn write0(&self) -> WRITE0_R

Bit 31 - Must be written with 0.

impl R<u32, Reg<u32, _RXPAUSEQUANT>>

pub fn quant(&self) -> QUANT_R

Bits 0:15 - Received pause quantum

impl R<u32, Reg<u32, _TXPAUSEQUANT>>

pub fn quant(&self) -> QUANT_R

Bits 0:15 - Transmit pause quantum

pub fn quantp1(&self) -> QUANTP1_R

Bits 16:31 - Transmit pause quantum - written with the pause quantum value for pause frame transmission of priority 1.

impl R<u32, Reg<u32, _PBUFTXCUTTHRU>>

pub fn dmatxcutthruthr(&self) -> DMATXCUTTHRUTHR_R

Bits 0:9 - Watermark value

pub fn dmatxcutthru(&self) -> DMATXCUTTHRU_R

Bit 31 - Enable TX partial store and forward operation

impl R<u32, Reg<u32, _PBUFRXCUTTHRU>>

pub fn dmarxcutthruthr(&self) -> DMARXCUTTHRUTHR_R

Bits 0:9 - Watermark value

pub fn dmarxcutthru(&self) -> DMARXCUTTHRU_R

Bit 31 - Enable RX partial store and forward operation

impl R<u32, Reg<u32, _JUMBOMAXLEN>>

pub fn jumbomaxlen(&self) -> JUMBOMAXLEN_R

Bits 0:13 - Maximum Jumbo Frame Size - resets to the gem_jumbo_max_length define value.

impl R<u32, Reg<u32, _IMOD>>

pub fn rxintmod(&self) -> RXINTMOD_R

Bits 0:7 - Count of 800ns periods before bit 1 is set in the interrupt status register after a frame is received

pub fn txintmod(&self) -> TXINTMOD_R

Bits 16:23 - Count of 800ns periods before bit 7 is set in the interrupt status register after a frame is transmitted

impl R<u32, Reg<u32, _SYSWAKETIME>>

pub fn syswaketime(&self) -> SYSWAKETIME_R

Bits 0:15 - Count of 64ns, 320ns or 3200ns intervals before transmission starts after deassertion of tx_lpi_en

impl R<u32, Reg<u32, _HASHBOTTOM>>

pub fn addr(&self) -> ADDR_R

Bits 0:31 - The first 32 bits of the hash address register.

impl R<u32, Reg<u32, _HASHTOP>>

pub fn addr(&self) -> ADDR_R

Bits 0:31 - The remaining 32 bits of the hash address register.

impl R<u32, Reg<u32, _SPECADDR1BOTTOM>>

pub fn addr(&self) -> ADDR_R

Bits 0:31 - Least significant 32 bits of the destination address

impl R<u32, Reg<u32, _SPECADDR1TOP>>

pub fn addr(&self) -> ADDR_R

Bits 0:15 - Specific address 1 MSB

pub fn filtertype(&self) -> FILTERTYPE_R

Bit 16 - MAC SA or DA selection

impl R<u32, Reg<u32, _SPECADDR2BOTTOM>>

pub fn addr(&self) -> ADDR_R

Bits 0:31 - Least significant 32 bits of the destination address

impl R<u32, Reg<u32, _SPECADDR2TOP>>

pub fn addr(&self) -> ADDR_R

Bits 0:15 - Specific address 2 MSB

pub fn filtertype(&self) -> FILTERTYPE_R

Bit 16 - MAC SA or DA selection

pub fn filterbytemask(&self) -> FILTERBYTEMASK_R

Bits 24:29 - Filter byte Mask

impl R<u32, Reg<u32, _SPECADDR3BOTTOM>>

pub fn addr(&self) -> ADDR_R

Bits 0:31 - Least significant 32 bits of the destination address

impl R<u32, Reg<u32, _SPECADDR3TOP>>

pub fn addr(&self) -> ADDR_R

Bits 0:15 - Specific address 3 MSB

pub fn filtertype(&self) -> FILTERTYPE_R

Bit 16 - MAC SA or DA selection

pub fn filterbytemask(&self) -> FILTERBYTEMASK_R

Bits 24:29 - Filter byte Mask

impl R<u32, Reg<u32, _SPECADDR4BOTTOM>>

pub fn addr(&self) -> ADDR_R

Bits 0:31 - Least significant 32 bits of the destination address

impl R<u32, Reg<u32, _SPECADDR4TOP>>

pub fn addr(&self) -> ADDR_R

Bits 0:15 - Specific address 4 MSB

pub fn filtertype(&self) -> FILTERTYPE_R

Bit 16 - MAC SA or DA selection

pub fn filterbytemask(&self) -> FILTERBYTEMASK_R

Bits 24:29 - Filter byte Mask

impl R<u32, Reg<u32, _SPECTYPE1>>

pub fn match_(&self) -> MATCH_R

Bits 0:15 - Type ID match 1

pub fn enbcopy(&self) -> ENBCOPY_R

Bit 31 - Enable copying of type ID match 1 matched frames.

impl R<u32, Reg<u32, _SPECTYPE2>>

pub fn match_(&self) -> MATCH_R

Bits 0:15 - Type ID match 2

pub fn enbcopy(&self) -> ENBCOPY_R

Bit 31 - Enable copying of type ID match 2 matched frames.

impl R<u32, Reg<u32, _SPECTYPE3>>

pub fn match_(&self) -> MATCH_R

Bits 0:15 - Type ID match 3

pub fn enbcopy(&self) -> ENBCOPY_R

Bit 31 - Enable copying of type ID match 3 matched frames.

impl R<u32, Reg<u32, _SPECTYPE4>>

pub fn match_(&self) -> MATCH_R

Bits 0:15 - Type ID match 4

pub fn enbcopy(&self) -> ENBCOPY_R

Bit 31 - Enable copying of type ID match 4 matched frames.

impl R<u32, Reg<u32, _WOLREG>>

pub fn addr(&self) -> ADDR_R

Bits 0:15 - Wake on LAN ARP request IP address. Written to define the least significant 16 bits of the target IP address that is matched to generate a Wake on LAN event. A value of zero will not generate an event, even if this is matched by the received frame.

pub fn wolmask0(&self) -> WOLMASK0_R

Bit 16 - Wake on LAN magic packet event enable

pub fn wolmask1(&self) -> WOLMASK1_R

Bit 17 - Wake on LAN ARP request event enable

pub fn wolmask2(&self) -> WOLMASK2_R

Bit 18 - Wake on LAN specific address register 1 event enable

pub fn wolmask3(&self) -> WOLMASK3_R

Bit 19 - Wake on LAN multicast hash event enable

impl R<u32, Reg<u32, _STRETCHRATIO>>

pub fn ipgstretch(&self) -> IPGSTRETCH_R

Bits 0:15 - IPG Stretch

impl R<u32, Reg<u32, _STACKEDVLAN>>

pub fn match_(&self) -> MATCH_R

Bits 0:15 - User defined VLAN_TYPE field

pub fn enbprocessing(&self) -> ENBPROCESSING_R

Bit 31 - Enable stacked VLAN processing mode

impl R<u32, Reg<u32, _TXPFCPAUSE>>

pub fn vectorenb(&self) -> VECTORENB_R

Bits 0:7 - Priority Vector Enable. If bit 17 of the network control register is written with a one then the priority enable vector of the PFC priority based pause frame will be set equal to the value stored in this register [7:0].

pub fn vector(&self) -> VECTOR_R

Bits 8:15 - Priority Vector Pause Size. If bit 17 of the network control register is written with a one then for each entry equal to zero in the Transmit PFC Pause Register[15:8], the PFC pause frame’s pause quantum field associated with that entry will be taken from the transmit pause quantum register. For each entry equal to one in the Transmit PFC Pause Register [15:8], the pause quantum associated with that entry will be zero.

impl R<u32, Reg<u32, _MASKADD1BOTTOM>>

pub fn addrmask(&self) -> ADDRMASK_R

Bits 0:31 - Specific Address Mask

impl R<u32, Reg<u32, _MASKADD1TOP>>

pub fn addrmask(&self) -> ADDRMASK_R

Bits 0:15 - Specific Address Mask

impl R<u32, Reg<u32, _RXPTPUNICAST>>

pub fn addr(&self) -> ADDR_R

Bits 0:31 - Unicast IP destination address

impl R<u32, Reg<u32, _TXPTPUNICAST>>

pub fn addr(&self) -> ADDR_R

Bits 0:31 - Unicast IP destination address

impl R<u32, Reg<u32, _TSUNSECCMP>>

pub fn compval(&self) -> COMPVAL_R

Bits 0:21 - TSU timer comparison value (ns)

impl R<u32, Reg<u32, _TSUSECCMP>>

pub fn compval(&self) -> COMPVAL_R

Bits 0:31 - TSU timer comparison value (s)

impl R<u32, Reg<u32, _TSUMSBSECCMP>>

pub fn compval(&self) -> COMPVAL_R

Bits 0:15 - TSU timer comparison value (s)

impl R<u32, Reg<u32, _TSUPTPTXMSBSEC>>

pub fn timersec(&self) -> TIMERSEC_R

Bits 0:15 - PTP Event Frame TX Seconds

impl R<u32, Reg<u32, _TSUPTPRXMSBSEC>>

pub fn timersec(&self) -> TIMERSEC_R

Bits 0:15 - PTP Event Frame TX Seconds

impl R<u32, Reg<u32, _TSUPEERTXMSBSEC>>

pub fn timersec(&self) -> TIMERSEC_R

Bits 0:15 - PTP Peer Event Frame TX Seconds

impl R<u32, Reg<u32, _TSUPEERRXMSBSEC>>

pub fn timersec(&self) -> TIMERSEC_R

Bits 0:15 - PTP Peer Event Frame RX Seconds

impl R<u32, Reg<u32, _OCTETSTXEDBOTTOM>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - Transmitted octets in frame without errors [31:0]

impl R<u32, Reg<u32, _OCTETSTXEDTOP>>

pub fn count(&self) -> COUNT_R

Bits 0:15 - Transmitted octets in frame without errors [47:32]

impl R<u32, Reg<u32, _FRAMESTXEDOK>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - Frames transmitted without error

impl R<u32, Reg<u32, _BROADCASTTXED>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - Broadcast frames transmitted without error

impl R<u32, Reg<u32, _MULTICASTTXED>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - Multicast frames transmitted without error

impl R<u32, Reg<u32, _PFRAMESTXED>>

pub fn count(&self) -> COUNT_R

Bits 0:15 - Transmitted pause frames

impl R<u32, Reg<u32, _FRAMESTXED64>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - 64 byte frames transmitted without error

impl R<u32, Reg<u32, _FRAMESTXED65>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - 65 to127 byte frames transmitted without error

impl R<u32, Reg<u32, _FRAMESTXED128>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - 128 to 255 byte frames transmitted without error

impl R<u32, Reg<u32, _FRAMESTXED256>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - 256 to 511 byte frames transmitted without error

impl R<u32, Reg<u32, _FRAMESTXED512>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - 512 to 1023 byte frames transmitted without error

impl R<u32, Reg<u32, _FRAMESTXED1024>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - 1024 to 1518 byte frames transmitted without error

impl R<u32, Reg<u32, _FRAMESTXED1519>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - Greater than 1518 byte frames transmitted without error

impl R<u32, Reg<u32, _TXUNDERRUNS>>

pub fn count(&self) -> COUNT_R

Bits 0:9 - Transmit under runs

impl R<u32, Reg<u32, _SINGLECOLS>>

pub fn count(&self) -> COUNT_R

Bits 0:17 - Single collision frames

impl R<u32, Reg<u32, _MULTICOLS>>

pub fn count(&self) -> COUNT_R

Bits 0:17 - Multiple collision frames

impl R<u32, Reg<u32, _EXCESSCOLS>>

pub fn count(&self) -> COUNT_R

Bits 0:9 - Excessive collisions

impl R<u32, Reg<u32, _LATECOLS>>

pub fn count(&self) -> COUNT_R

Bits 0:9 - Late collisions

impl R<u32, Reg<u32, _DEFERREDFRAMES>>

pub fn count(&self) -> COUNT_R

Bits 0:17 - Deferred transmission frames

impl R<u32, Reg<u32, _CRSERRS>>

pub fn count(&self) -> COUNT_R

Bits 0:9 - Carrier sense errors

impl R<u32, Reg<u32, _OCTETSRXEDBOTTOM>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - Received octets in frame without errors

impl R<u32, Reg<u32, _OCTETSRXEDTOP>>

pub fn count(&self) -> COUNT_R

Bits 0:15 - Received octets in frame without errors

impl R<u32, Reg<u32, _FRAMESRXEDOK>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - Frames received without error

impl R<u32, Reg<u32, _BROADCASTRXED>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - Broadcast frames received without error

impl R<u32, Reg<u32, _MULTICASTRXED>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - Multicast frames received without error

impl R<u32, Reg<u32, _PFRAMESRXED>>

pub fn count(&self) -> COUNT_R

Bits 0:15 - Received pause frames

impl R<u32, Reg<u32, _FRAMESRXED64>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - 64 byte frames received without error

impl R<u32, Reg<u32, _FRAMESRXED65>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - 65 to 127 byte frames received without error

impl R<u32, Reg<u32, _FRAMESRXED128>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - 128 to 255 byte frames received without error

impl R<u32, Reg<u32, _FRAMESRXED256>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - 256 to 511 byte frames received without error

impl R<u32, Reg<u32, _FRAMESRXED512>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - 512 to 1023 byte frames received without error

impl R<u32, Reg<u32, _FRAMESRXED1024>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - 1024 to 1518 byte frames received without error

impl R<u32, Reg<u32, _FRAMESRXED1519>>

pub fn count(&self) -> COUNT_R

Bits 0:31 - 1519 to maximum byte frames received without error

impl R<u32, Reg<u32, _UNDERSIZEFRAMES>>

pub fn count(&self) -> COUNT_R

Bits 0:9 - Undersize frames received

impl R<u32, Reg<u32, _EXCESSIVERXLEN>>

pub fn count(&self) -> COUNT_R

Bits 0:9 - Oversize frames received

impl R<u32, Reg<u32, _RXJABBERS>>

pub fn count(&self) -> COUNT_R

Bits 0:9 - Jabbers received

impl R<u32, Reg<u32, _FCSERRS>>

pub fn count(&self) -> COUNT_R

Bits 0:9 - Frame check sequence errors

impl R<u32, Reg<u32, _RXLENERRS>>

pub fn count(&self) -> COUNT_R

Bits 0:9 - Length field frame errors

impl R<u32, Reg<u32, _RXSYMBOLERRS>>

pub fn count(&self) -> COUNT_R

Bits 0:9 - Receive symbol errors

impl R<u32, Reg<u32, _ALIGNERRS>>

pub fn count(&self) -> COUNT_R

Bits 0:9 - Alignment errors

impl R<u32, Reg<u32, _RXRESOURCEERRS>>

pub fn count(&self) -> COUNT_R

Bits 0:17 - Receive resource errors

impl R<u32, Reg<u32, _RXOVERRUNS>>

pub fn count(&self) -> COUNT_R

Bits 0:9 - Receive overruns

impl R<u32, Reg<u32, _RXIPCKERRS>>

pub fn count(&self) -> COUNT_R

Bits 0:7 - IP header checksum errors

impl R<u32, Reg<u32, _RXTCPCKERRS>>

pub fn count(&self) -> COUNT_R

Bits 0:7 - TCP checksum errors

impl R<u32, Reg<u32, _RXUDPCKERRS>>

pub fn count(&self) -> COUNT_R

Bits 0:7 - UDP checksum errors

impl R<u32, Reg<u32, _AUTOFLUSHEDPKTS>>

pub fn count(&self) -> COUNT_R

Bits 0:15 - Flushed RX pkts counter

impl R<u32, Reg<u32, _TSUTIMERINCRSUBNSEC>>

pub fn subnsincr(&self) -> SUBNSINCR_R

Bits 0:15 - MSB [23:8] of the subscript-ns value

pub fn subnsincrlsb(&self) -> SUBNSINCRLSB_R

Bits 24:31 - LSB [7:0] of the subscript-ns value

impl R<u32, Reg<u32, _TSUTIMERMSBSEC>>

pub fn timer(&self) -> TIMER_R

Bits 0:15 - MSB 16 bits of seconds timer count.

impl R<u32, Reg<u32, _TSUTIMERSEC>>

pub fn timer(&self) -> TIMER_R

Bits 0:31 - 1588 Timer Seconds Register

impl R<u32, Reg<u32, _TSUTIMERNSEC>>

pub fn timer(&self) -> TIMER_R

Bits 0:29 - Timer count in nanoseconds

impl R<u32, Reg<u32, _TSUTIMERADJUST>>

pub fn incrementval(&self) -> INCREMENTVAL_R

Bits 0:29 - Timer increment value

pub fn addsubtract(&self) -> ADDSUBTRACT_R

Bit 31 - Write as one to subtract from the 1588 timer

impl R<u32, Reg<u32, _TSUTIMERINCR>>

pub fn nsincrement(&self) -> NSINCREMENT_R

Bits 0:7 - A count of nanoseconds by which the 1588 timer nanoseconds register will be incremented each clock cycle

pub fn altnsincr(&self) -> ALTNSINCR_R

Bits 8:15 - Alternative nanoseconds count

pub fn numincs(&self) -> NUMINCS_R

Bits 16:23 - Number of incs before alt inc

impl R<u32, Reg<u32, _TSUPTPTXSEC>>

pub fn timer(&self) -> TIMER_R

Bits 0:31 - PTP Event Frame Transmitted Seconds

impl R<u32, Reg<u32, _TSUPTPTXNSEC>>

pub fn timer(&self) -> TIMER_R

Bits 0:29 - PTP Event Frame Transmitted Nanoseconds

impl R<u32, Reg<u32, _TSUPTPRXSEC>>

pub fn timer(&self) -> TIMER_R

Bits 0:31 - PTP Event Frame Received Seconds

impl R<u32, Reg<u32, _TSUPTPRXNSEC>>

pub fn timer(&self) -> TIMER_R

Bits 0:29 - PTP Event Frame Received Nanoseconds

impl R<u32, Reg<u32, _TSUPEERTXSEC>>

pub fn timer(&self) -> TIMER_R

Bits 0:31 - PTP Peer Event Frame Received Seconds

impl R<u32, Reg<u32, _TSUPEERTXNSEC>>

pub fn timer(&self) -> TIMER_R

Bits 0:29 - PTP Peer Event Frame Transmitted Nanoseconds

impl R<u32, Reg<u32, _TSUPEERRXSEC>>

pub fn timer(&self) -> TIMER_R

Bits 0:31 - PTP Peer Event Frame Received Seconds

impl R<u32, Reg<u32, _TSUPEERRXNSEC>>

pub fn timer(&self) -> TIMER_R

Bits 0:29 - PTP Peer Event Frame Received Nanoseconds

impl R<u32, Reg<u32, _TXPAUSEQUANT1>>

pub fn quantp2(&self) -> QUANTP2_R

Bits 0:15 - Transmit pause quantum - written with the pause quantum value for pause frame transmission of priority 2.

pub fn quantp3(&self) -> QUANTP3_R

Bits 16:31 - Transmit pause quantum - written with the pause quantum value for pause frame transmission of priority 3.

impl R<u32, Reg<u32, _TXPAUSEQUANT2>>

pub fn quantp4(&self) -> QUANTP4_R

Bits 0:15 - Transmit pause quantum - written with the pause quantum value for pause frame transmission of priority 4.

pub fn quantp5(&self) -> QUANTP5_R

Bits 16:31 - Transmit pause quantum - written with the pause quantum value for pause frame transmission of priority 5.

impl R<u32, Reg<u32, _TXPAUSEQUANT3>>

pub fn quantp6(&self) -> QUANTP6_R

Bits 0:15 - Transmit pause quantum - written with the pause quantum value for pause frame transmission of priority 6.

pub fn quantp7(&self) -> QUANTP7_R

Bits 16:31 - Transmit pause quantum - written with the pause quantum value for pause frame transmission of priority 7.

impl R<u32, Reg<u32, _RXLPI>>

pub fn count(&self) -> COUNT_R

Bits 0:15 - Count of RX LPI transitions

impl R<u32, Reg<u32, _RXLPITIME>>

pub fn lpitime(&self) -> LPITIME_R

Bits 0:23 - Time in LPI

impl R<u32, Reg<u32, _TXLPI>>

pub fn count(&self) -> COUNT_R

Bits 0:15 - Count of LPI transmitions

impl R<u32, Reg<u32, _TXLPITIME>>

pub fn lpitime(&self) -> LPITIME_R

Bits 0:23 - Time in LPI

impl R<u32, Reg<u32, _TXBDCTRL>>

pub fn txbdtsmode(&self) -> TXBDTSMODE_R

Bits 4:5 - TX Descriptor Timestamp Insertion mode, 00: TS insertion disable, 01: TS inserted for PTP Event Frames only, 10: TS inserted for All PTP Frames only, 11: TS insertion for All Frames

impl R<u32, Reg<u32, _RXBDCTRL>>

pub fn rxbdtsmode(&self) -> RXBDTSMODE_R

Bits 4:5 - RX Descriptor Timestamp Insertion mode, 00: TS insertion disable, 01: TS inserted for PTP Event Frames only, 10: TS inserted for All PTP Frames only, 11: TS insertion for All Frames

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn mdiopen(&self) -> MDIOPEN_R

Bit 0 - MDIO I/O Enable

pub fn miitxerpen(&self) -> MIITXERPEN_R

Bit 1 - MII TX ER I/O Enable

pub fn miirxerpen(&self) -> MIIRXERPEN_R

Bit 2 - MII TX ER I/O Enable

pub fn miipen(&self) -> MIIPEN_R

Bit 3 - MII I/O Enable

pub fn rmiipen(&self) -> RMIIPEN_R

Bit 4 - RMII I/O Enable

pub fn tsutmrtogpen(&self) -> TSUTMRTOGPEN_R

Bit 5 - TSU_TMR_CNT_SEC Output Enable

impl R<u8, MIITXLOC_A>

pub fn variant(&self) -> Variant<u8, MIITXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

impl R<u8, MIIRXLOC_A>

pub fn variant(&self) -> Variant<u8, MIIRXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, MIICRSLOC_A>

pub fn variant(&self) -> Variant<u8, MIICRSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, MIICOLLOC_A>

pub fn variant(&self) -> Variant<u8, MIICOLLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn miitxloc(&self) -> MIITXLOC_R

Bits 0:5 - I/O Location

pub fn miirxloc(&self) -> MIIRXLOC_R

Bits 8:13 - I/O Location

pub fn miicrsloc(&self) -> MIICRSLOC_R

Bits 16:21 - I/O Location

pub fn miicolloc(&self) -> MIICOLLOC_R

Bits 24:29 - I/O Location

impl R<u8, TSUEXTCLKLOC_A>

pub fn variant(&self) -> Variant<u8, TSUEXTCLKLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

impl R<u8, TSUTMRTOGLOC_A>

pub fn variant(&self) -> Variant<u8, TSUTMRTOGLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

impl R<u8, MDIOLOC_A>

pub fn variant(&self) -> Variant<u8, MDIOLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

impl R<u8, RMIILOC_A>

pub fn variant(&self) -> Variant<u8, RMIILOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

impl R<u32, Reg<u32, _ROUTELOC1>>

pub fn tsuextclkloc(&self) -> TSUEXTCLKLOC_R

Bits 0:5 - I/O Location

pub fn tsutmrtogloc(&self) -> TSUTMRTOGLOC_R

Bits 8:13 - I/O Location

pub fn mdioloc(&self) -> MDIOLOC_R

Bits 16:21 - I/O Location

pub fn rmiiloc(&self) -> RMIILOC_R

Bits 24:29 - I/O Location

impl R<u8, TSUCLKSEL_A>

pub fn variant(&self) -> Variant<u8, TSUCLKSEL_A>

Get enumerated values variant

pub fn is_noclock(&self) -> bool

Checks if the value of the field is NOCLOCK

pub fn is_pll(&self) -> bool

Checks if the value of the field is PLL

pub fn is_rxclk(&self) -> bool

Checks if the value of the field is RXCLK

pub fn is_refclk(&self) -> bool

Checks if the value of the field is REFCLK

pub fn is_tsuextclk(&self) -> bool

Checks if the value of the field is TSUEXTCLK

impl R<u32, Reg<u32, _CTRL>>

pub fn tsuclksel(&self) -> TSUCLKSEL_R

Bits 0:2 - TSU Clock selection value

pub fn tsupresc(&self) -> TSUPRESC_R

Bits 4:7 - Clock division factor of TSUPRESC+1

pub fn miisel(&self) -> MIISEL_R

Bit 8 - MII select signal

pub fn gblclken(&self) -> GBLCLKEN_R

Bit 9 - Global Clock Enable signal for Ethernet clocks tsu_clk, tx_clk, rx_clk and ref_clk

pub fn txrefclksel(&self) -> TXREFCLKSEL_R

Bit 10 - REFCLK source select for RMII_TXD and RMII_TX_EN

impl R<u32, Reg<u32, _SDMASYSADDR>>

pub fn sdmasysaddrarg(&self) -> SDMASYSADDRARG_R

Bits 0:31 - Physical SYS Memory ADDR Used for DMA Transfers or the Second Argument for the Auto CMD23

impl R<u16, TFRBLKSIZE_A>

pub fn variant(&self) -> Variant<u16, TFRBLKSIZE_A>

Get enumerated values variant

pub fn is_noxfer(&self) -> bool

Checks if the value of the field is NOXFER

impl R<u8, HSTSDMABUFSIZE_A>

pub fn variant(&self) -> HSTSDMABUFSIZE_A

Get enumerated values variant

pub fn is_size4(&self) -> bool

Checks if the value of the field is SIZE4

pub fn is_size8(&self) -> bool

Checks if the value of the field is SIZE8

pub fn is_size16(&self) -> bool

Checks if the value of the field is SIZE16

pub fn is_size32(&self) -> bool

Checks if the value of the field is SIZE32

pub fn is_size64(&self) -> bool

Checks if the value of the field is SIZE64

pub fn is_size128(&self) -> bool

Checks if the value of the field is SIZE128

pub fn is_size256(&self) -> bool

Checks if the value of the field is SIZE256

pub fn is_size512(&self) -> bool

Checks if the value of the field is SIZE512

impl R<u16, BLKSCNTFORCURRTFR_A>

pub fn variant(&self) -> Variant<u16, BLKSCNTFORCURRTFR_A>

Get enumerated values variant

pub fn is_stopcnt(&self) -> bool

Checks if the value of the field is STOPCNT

impl R<u32, Reg<u32, _BLKSIZE>>

pub fn tfrblksize(&self) -> TFRBLKSIZE_R

Bits 0:11 - Transfer Block Size, Specifies the Block Size for Block Data Transfers for CMD17, CMD18, CMD24, CMD25, and CMD53

pub fn hstsdmabufsize(&self) -> HSTSDMABUFSIZE_R

Bits 12:14 - Host SDMA Buffer Size

pub fn blkscntforcurrtfr(&self) -> BLKSCNTFORCURRTFR_R

Bits 16:31 - Blocks Count for Current Transfer

impl R<u32, Reg<u32, _CMDARG1>>

pub fn cmdarg1(&self) -> CMDARG1_R

Bits 0:31 - Command Argument 1

impl R<u8, AUTOCMDEN_A>

pub fn variant(&self) -> Variant<u8, AUTOCMDEN_A>

Get enumerated values variant

pub fn is_acmddisabled(&self) -> bool

Checks if the value of the field is ACMDDISABLED

pub fn is_acmd12en(&self) -> bool

Checks if the value of the field is ACMD12EN

pub fn is_acmd23en(&self) -> bool

Checks if the value of the field is ACMD23EN

impl R<u8, RESPTYPESEL_A>

pub fn variant(&self) -> RESPTYPESEL_A

Get enumerated values variant

pub fn is_noresp(&self) -> bool

Checks if the value of the field is NORESP

pub fn is_resp136(&self) -> bool

Checks if the value of the field is RESP136

pub fn is_resp48(&self) -> bool

Checks if the value of the field is RESP48

pub fn is_busyaftresp(&self) -> bool

Checks if the value of the field is BUSYAFTRESP

impl R<u8, CMDTYPE_A>

pub fn variant(&self) -> CMDTYPE_A

Get enumerated values variant

pub fn is_normal(&self) -> bool

Checks if the value of the field is NORMAL

pub fn is_suspend(&self) -> bool

Checks if the value of the field is SUSPEND

pub fn is_resume(&self) -> bool

Checks if the value of the field is RESUME

pub fn is_abort(&self) -> bool

Checks if the value of the field is ABORT

impl R<u32, Reg<u32, _TFRMODE>>

pub fn dmaen(&self) -> DMAEN_R

Bit 0 - DMA Enable

pub fn blkcnten(&self) -> BLKCNTEN_R

Bit 1 - Block Count Enable

pub fn autocmden(&self) -> AUTOCMDEN_R

Bits 2:3 - Auto Command Enable

pub fn datdirsel(&self) -> DATDIRSEL_R

Bit 4 - Data Transfer Direction Select

pub fn multsingblksel(&self) -> MULTSINGBLKSEL_R

Bit 5 - Multiple or Single Block Data Transfer Selection

pub fn resptypesel(&self) -> RESPTYPESEL_R

Bits 16:17 - Response Type Select

pub fn cmdcrcchken(&self) -> CMDCRCCHKEN_R

Bit 19 - Command CRC Check Enable

pub fn cmdindxchken(&self) -> CMDINDXCHKEN_R

Bit 20 - Command Index Check Enable

pub fn datpressel(&self) -> DATPRESSEL_R

Bit 21 - Data Present Select

pub fn cmdtype(&self) -> CMDTYPE_R

Bits 22:23 - Command Type

pub fn cmdindex(&self) -> CMDINDEX_R

Bits 24:29 - Command Index

impl R<u32, Reg<u32, _RESP0>>

pub fn cmdresp0(&self) -> CMDRESP0_R

Bits 0:31 - Command Response 0

impl R<u32, Reg<u32, _RESP2>>

pub fn cmdresp1(&self) -> CMDRESP1_R

Bits 0:31 - Command Response 1

impl R<u32, Reg<u32, _RESP4>>

pub fn cmdresp2(&self) -> CMDRESP2_R

Bits 0:31 - Command Response 2

impl R<u32, Reg<u32, _RESP6>>

pub fn cmdresp3(&self) -> CMDRESP3_R

Bits 0:31 - Command Response 3

impl R<u32, Reg<u32, _BUFDATPORT>>

pub fn bufdat(&self) -> BUFDAT_R

Bits 0:31 - Buffer Data

impl R<u32, Reg<u32, _PRSSTAT>>

pub fn cmdinhibitcmd(&self) -> CMDINHIBITCMD_R

Bit 0 - Command Inhibit (CMD)

pub fn cmdinhibitdat(&self) -> CMDINHIBITDAT_R

Bit 1 - Command Inhibit (DAT)

pub fn datlineactive(&self) -> DATLINEACTIVE_R

Bit 2 - DAT Line Active

pub fn retuningreq(&self) -> RETUNINGREQ_R

Bit 3 - Re-Tuning Request

pub fn wrtranact(&self) -> WRTRANACT_R

Bit 8 - Write Transfer Active

pub fn rdtranact(&self) -> RDTRANACT_R

Bit 9 - Read Transfer Active

pub fn bufferwriteenable(&self) -> BUFFERWRITEENABLE_R

Bit 10 - Buffer Write Enable

pub fn bufrden(&self) -> BUFRDEN_R

Bit 11 - Buffer Read Enable

pub fn cardins(&self) -> CARDINS_R

Bit 16 - Card Inserted Status

pub fn cardstatestable(&self) -> CARDSTATESTABLE_R

Bit 17 - Card State Stable Status

pub fn carddetpinlvl(&self) -> CARDDETPINLVL_R

Bit 18 - Card Detect Pin Level

pub fn wrprotswpinlvl(&self) -> WRPROTSWPINLVL_R

Bit 19 - Write Protect Switch Pin Level

pub fn dat3to0siglvl(&self) -> DAT3TO0SIGLVL_R

Bits 20:23 - DAT[3:0] Line Signal Level

pub fn cmdsiglvl(&self) -> CMDSIGLVL_R

Bit 24 - Command Line Signal Level

pub fn dat7to4siglvl(&self) -> DAT7TO4SIGLVL_R

Bits 25:28 - DAT[7:4] Line Signal Level

impl R<u8, DMASEL_A>

pub fn variant(&self) -> DMASEL_A

Get enumerated values variant

pub fn is_sdma(&self) -> bool

Checks if the value of the field is SDMA

pub fn is_adma1(&self) -> bool

Checks if the value of the field is ADMA1

pub fn is_adma2(&self) -> bool

Checks if the value of the field is ADMA2

pub fn is_64bitadma2(&self) -> bool

Checks if the value of the field is _64BITADMA2

impl R<u8, SDBUSVOLTSEL_A>

pub fn variant(&self) -> Variant<u8, SDBUSVOLTSEL_A>

Get enumerated values variant

pub fn is_1p8v(&self) -> bool

Checks if the value of the field is _1P8V

pub fn is_3p0v(&self) -> bool

Checks if the value of the field is _3P0V

pub fn is_3p3v(&self) -> bool

Checks if the value of the field is _3P3V

impl R<u32, Reg<u32, _HOSTCTRL1>>

pub fn ledctrl(&self) -> LEDCTRL_R

Bit 0 - LED Control

pub fn dattranwd(&self) -> DATTRANWD_R

Bit 1 - Data Transfer Width 1-bit or 4-bit Mode

pub fn hsen(&self) -> HSEN_R

Bit 2 - High Speed Enable

pub fn dmasel(&self) -> DMASEL_R

Bits 3:4 - DMA Select

pub fn extdattranwd(&self) -> EXTDATTRANWD_R

Bit 5 - Extended Data Transfer Width

pub fn cdtstlvl(&self) -> CDTSTLVL_R

Bit 6 - Card Detect Test Level

pub fn cdsigdet(&self) -> CDSIGDET_R

Bit 7 - Card Detetct Signal Detection

pub fn sdbuspower(&self) -> SDBUSPOWER_R

Bit 8 - SD Bus Power

pub fn sdbusvoltsel(&self) -> SDBUSVOLTSEL_R

Bits 9:11 - SD Bus Voltage Select

pub fn hrdrst(&self) -> HRDRST_R

Bit 12 - Hardware Reset Signal

pub fn stopatblkgapreq(&self) -> STOPATBLKGAPREQ_R

Bit 16 - Stop at Block Gap Request

pub fn continuereq(&self) -> CONTINUEREQ_R

Bit 17 - Continue Request

pub fn rdwaitctrl(&self) -> RDWAITCTRL_R

Bit 18 - Read Wait Control

pub fn intatblkgap(&self) -> INTATBLKGAP_R

Bit 19 - Interrupt at Block Gap

pub fn spimode(&self) -> SPIMODE_R

Bit 20 - SPI Mode Enable

pub fn booten(&self) -> BOOTEN_R

Bit 21 - Boot Enable

pub fn altbooten(&self) -> ALTBOOTEN_R

Bit 22 - Alternate Boot Enable

pub fn bootackchk(&self) -> BOOTACKCHK_R

Bit 23 - Boot Ack Check

pub fn wkupevntenoncardint(&self) -> WKUPEVNTENONCARDINT_R

Bit 24 - Wakeup Event Enable on Card Interrupt

pub fn wkupevntenoncins(&self) -> WKUPEVNTENONCINS_R

Bit 25 - Wakeup Event Enable on SD Card Insertion

pub fn wkupevntenoncrm(&self) -> WKUPEVNTENONCRM_R

Bit 26 - Wakeup Event Enable on SD Card Removal

impl R<u8, SDCLKFREQSEL_A>

pub fn variant(&self) -> Variant<u8, SDCLKFREQSEL_A>

Get enumerated values variant

pub fn is_nodivision(&self) -> bool

Checks if the value of the field is NODIVISION

impl R<u32, Reg<u32, _CLOCKCTRL>>

pub fn intclken(&self) -> INTCLKEN_R

Bit 0 - Internal Clock Enable

pub fn intclkstable(&self) -> INTCLKSTABLE_R

Bit 1 - Internal Clock Stable

pub fn sdclken(&self) -> SDCLKEN_R

Bit 2 - SDIO_CLK Pin Clock Enable

pub fn clkgensel(&self) -> CLKGENSEL_R

Bit 5 - Clock Generator Select

pub fn uppsdclkfre(&self) -> UPPSDCLKFRE_R

Bits 6:7 - Upper Bits of SD_CLK Frequency Select

pub fn sdclkfreqsel(&self) -> SDCLKFREQSEL_R

Bits 8:15 - SD_CLK Frequency Select

pub fn dattoutcntval(&self) -> DATTOUTCNTVAL_R

Bits 16:19 - Data Timeout Counter Value

pub fn sftrsta(&self) -> SFTRSTA_R

Bit 24 - Software Reset for All

pub fn sftrstcmd(&self) -> SFTRSTCMD_R

Bit 25 - Software Reset for CMD Line

pub fn sftrstdat(&self) -> SFTRSTDAT_R

Bit 26 - Software Reset for DAT Line

impl R<u32, Reg<u32, _IFCR>>

pub fn cmdcom(&self) -> CMDCOM_R

Bit 0 - Command Complete

pub fn trancom(&self) -> TRANCOM_R

Bit 1 - Transfer Complete

pub fn blkgapevt(&self) -> BLKGAPEVT_R

Bit 2 - Block Gap Event

pub fn dmaint(&self) -> DMAINT_R

Bit 3 - DMA Interrupt

pub fn bfrwrrdy(&self) -> BFRWRRDY_R

Bit 4 - Buffer Write Ready

pub fn bfrrdrdy(&self) -> BFRRDRDY_R

Bit 5 - Buffer Read Ready

pub fn cardins(&self) -> CARDINS_R

Bit 6 - Card Insertion

pub fn cardrm(&self) -> CARDRM_R

Bit 7 - Card Removal

pub fn cardint(&self) -> CARDINT_R

Bit 8 - Card Interrupt

pub fn retuningevt(&self) -> RETUNINGEVT_R

Bit 12 - Re-Tunning Event

pub fn bootackrcv(&self) -> BOOTACKRCV_R

Bit 13 - Boot Ack Received

pub fn bootterminate(&self) -> BOOTTERMINATE_R

Bit 14 - Boot Terminate Interrupt

pub fn errint(&self) -> ERRINT_R

Bit 15 - Error Interrupt

pub fn cmdtouterr(&self) -> CMDTOUTERR_R

Bit 16 - Command Timeout Error

pub fn cmdcrcerr(&self) -> CMDCRCERR_R

Bit 17 - CMD CRC Error

pub fn cmdendbiterr(&self) -> CMDENDBITERR_R

Bit 18 - Command End Bit Error

pub fn cmdindexerr(&self) -> CMDINDEXERR_R

Bit 19 - Command Index Error

pub fn dattouterr(&self) -> DATTOUTERR_R

Bit 20 - Data Time-out Error

pub fn datcrcerr(&self) -> DATCRCERR_R

Bit 21 - Data CRC Error

pub fn datendbiterr(&self) -> DATENDBITERR_R

Bit 22 - Data End Bit Error

pub fn currentlimiterr(&self) -> CURRENTLIMITERR_R

Bit 23 - Current Limit Error

pub fn autocmderr(&self) -> AUTOCMDERR_R

Bit 24 - Auto CMD Error

pub fn admaerr(&self) -> ADMAERR_R

Bit 25 - ADMA Error

pub fn targetresp(&self) -> TARGETRESP_R

Bit 28 - Specific Error STAT

impl R<u32, Reg<u32, _IFENC>>

pub fn cmdcomen(&self) -> CMDCOMEN_R

Bit 0 - Command Complete Signal Enable

pub fn trancomen(&self) -> TRANCOMEN_R

Bit 1 - Transfer Complete Signal Enable

pub fn blkgapevten(&self) -> BLKGAPEVTEN_R

Bit 2 - Block Gap Event Signal Enable

pub fn dmainten(&self) -> DMAINTEN_R

Bit 3 - DMA Interrupt Signal Enable

pub fn bufwrrdyen(&self) -> BUFWRRDYEN_R

Bit 4 - Buffer Write Ready Signal Enable

pub fn bufrdrdyen(&self) -> BUFRDRDYEN_R

Bit 5 - Buffer Read Ready Signal Enable

pub fn cardinsen(&self) -> CARDINSEN_R

Bit 6 - Card Insertion Signal Enable

pub fn cardrmen(&self) -> CARDRMEN_R

Bit 7 - Card Removal Signal Enable

pub fn cardinten(&self) -> CARDINTEN_R

Bit 8 - Card Interrupt Signal Enable

pub fn retuningevten(&self) -> RETUNINGEVTEN_R

Bit 12 - Re-Tunning Event Signal Enable

pub fn bootackrcven(&self) -> BOOTACKRCVEN_R

Bit 13 - Boot Ack Received Signal Enable

pub fn bootterminateen(&self) -> BOOTTERMINATEEN_R

Bit 14 - Boot Terminate Interrupt Signal Enable

pub fn cmdtouterren(&self) -> CMDTOUTERREN_R

Bit 16 - Command Time-out Error Status Enable

pub fn cmdcrcerren(&self) -> CMDCRCERREN_R

Bit 17 - Command CRC Error Status Enable

pub fn cmdendbiterren(&self) -> CMDENDBITERREN_R

Bit 18 - Command End Bit Error Status Enable

pub fn cmdindexerren(&self) -> CMDINDEXERREN_R

Bit 19 - Command Index Error Status Enable

pub fn dattouterren(&self) -> DATTOUTERREN_R

Bit 20 - Data Timeout Error Status Enable

pub fn datcrcerren(&self) -> DATCRCERREN_R

Bit 21 - Data CRC Error Status Enable

pub fn datendbiterren(&self) -> DATENDBITERREN_R

Bit 22 - Data End Bit Error Status Enable

pub fn currentlimiterren(&self) -> CURRENTLIMITERREN_R

Bit 23 - Current Limit Error Status Enable

pub fn autocmderren(&self) -> AUTOCMDERREN_R

Bit 24 - Auto CMD12 Error Status Enable

pub fn admaerren(&self) -> ADMAERREN_R

Bit 25 - ADMA Error Status Enable

pub fn tuningerren(&self) -> TUNINGERREN_R

Bit 26 - Tuning Error Status Enable

pub fn targetrespen(&self) -> TARGETRESPEN_R

Bit 28 - Target Response/Host Error Status Enable

impl R<u32, Reg<u32, _IEN>>

pub fn cmdcomsen(&self) -> CMDCOMSEN_R

Bit 0 - Command Complete Signal Enable

pub fn trancomsen(&self) -> TRANCOMSEN_R

Bit 1 - Transfer Complete Signal Enable

pub fn blkgapevtsen(&self) -> BLKGAPEVTSEN_R

Bit 2 - Block Gap Event Signal Enable

pub fn dmaintsen(&self) -> DMAINTSEN_R

Bit 3 - DMA Interrupt Signal Enable

pub fn bufwrrdysen(&self) -> BUFWRRDYSEN_R

Bit 4 - Buffer Write Ready Signal Enable

pub fn bufrdrdysen(&self) -> BUFRDRDYSEN_R

Bit 5 - Buffer Read Ready Signal Enable

pub fn cardinssen(&self) -> CARDINSSEN_R

Bit 6 - Card Insertion Signal Enable

pub fn cardremsen(&self) -> CARDREMSEN_R

Bit 7 - Card Removal Signal Enable

pub fn cardintsen(&self) -> CARDINTSEN_R

Bit 8 - Card Interrupt Signal Enable

pub fn retuningevtsen(&self) -> RETUNINGEVTSEN_R

Bit 12 - Re-Tuning Event Signal Enable

pub fn bootackrcvsen(&self) -> BOOTACKRCVSEN_R

Bit 13 - Boot Ack Received Signal Enable

pub fn bootterminatesen(&self) -> BOOTTERMINATESEN_R

Bit 14 - Boot Terminate Interrupt Signal Enable

pub fn cmdtouterrsen(&self) -> CMDTOUTERRSEN_R

Bit 16 - Command Timeout Error Signal Enable

pub fn cmdcrcerrsen(&self) -> CMDCRCERRSEN_R

Bit 17 - Command CRC Error Signal Enable

pub fn cmdendbiterrsen(&self) -> CMDENDBITERRSEN_R

Bit 18 - Command End Bit Error Signal Enable

pub fn cmdindexerrsen(&self) -> CMDINDEXERRSEN_R

Bit 19 - Command Index Error Signal Enable

pub fn dattouterrsen(&self) -> DATTOUTERRSEN_R

Bit 20 - Data Timeout Error Signal Enable

pub fn datcrcerrsen(&self) -> DATCRCERRSEN_R

Bit 21 - Data CRC Error Signal Enable

pub fn datendbiterrsen(&self) -> DATENDBITERRSEN_R

Bit 22 - Data End Bit Error Signal Enable

pub fn currentlimiterrsen(&self) -> CURRENTLIMITERRSEN_R

Bit 23 - Current Limit Error Signal Enable

pub fn autocmderrsen(&self) -> AUTOCMDERRSEN_R

Bit 24 - Auto CMD12 Error Signal Enable

pub fn admaerrsen(&self) -> ADMAERRSEN_R

Bit 25 - ADMA Error Signal Enable

pub fn tuningerrsignalenable(&self) -> TUNINGERRSIGNALENABLE_R

Bit 26 - Tuning Error Signal Enable

pub fn targetresperrsen(&self) -> TARGETRESPERRSEN_R

Bit 28 - Target Response Error Signal Enable

impl R<u8, UHSMODESEL_A>

pub fn variant(&self) -> Variant<u8, UHSMODESEL_A>

Get enumerated values variant

pub fn is_sdr12(&self) -> bool

Checks if the value of the field is SDR12

pub fn is_sdr25(&self) -> bool

Checks if the value of the field is SDR25

pub fn is_sdr50(&self) -> bool

Checks if the value of the field is SDR50

pub fn is_sdr104(&self) -> bool

Checks if the value of the field is SDR104

pub fn is_ddr50(&self) -> bool

Checks if the value of the field is DDR50

impl R<u8, DRVSTNSEL_A>

pub fn variant(&self) -> DRVSTNSEL_A

Get enumerated values variant

pub fn is_typeb(&self) -> bool

Checks if the value of the field is TYPEB

pub fn is_typea(&self) -> bool

Checks if the value of the field is TYPEA

pub fn is_typec(&self) -> bool

Checks if the value of the field is TYPEC

pub fn is_typed(&self) -> bool

Checks if the value of the field is TYPED

impl R<u32, Reg<u32, _AC12ERRSTAT>>

pub fn ac12notexe(&self) -> AC12NOTEXE_R

Bit 0 - Auto CMD12 Not Executed

pub fn ac12toe(&self) -> AC12TOE_R

Bit 1 - Auto CMD12 Timeout Error

pub fn ac12crcerr(&self) -> AC12CRCERR_R

Bit 2 - Auto CMD CRC Error

pub fn ac12endbiterr(&self) -> AC12ENDBITERR_R

Bit 3 - Auto CMD End Bit Error

pub fn ac12indexerr(&self) -> AC12INDEXERR_R

Bit 4 - Auto CMD Index Error

pub fn cnibac12err(&self) -> CNIBAC12ERR_R

Bit 7 - Command Not Issued By Auto CMD12 Error

pub fn uhsmodesel(&self) -> UHSMODESEL_R

Bits 16:18 - UHS Mode Select

pub fn sigen1p8v(&self) -> SIGEN1P8V_R

Bit 19 - Voltage 1.8V Signal Enable

pub fn drvstnsel(&self) -> DRVSTNSEL_R

Bits 20:21 - Driver Strength Select

pub fn exetuning(&self) -> EXETUNING_R

Bit 22 - Execute Tuning

pub fn sampclksel(&self) -> SAMPCLKSEL_R

Bit 23 - Sampling Clock Select

pub fn asyncinten(&self) -> ASYNCINTEN_R

Bit 30 - Asynchronous Interrupt Enable

pub fn prstvalen(&self) -> PRSTVALEN_R

Bit 31 - Preset Value Enable

impl R<u8, IFSLOTTYPE_A>

pub fn variant(&self) -> Variant<u8, IFSLOTTYPE_A>

Get enumerated values variant

pub fn is_removable(&self) -> bool

Checks if the value of the field is REMOVABLE

pub fn is_embedded(&self) -> bool

Checks if the value of the field is EMBEDDED

pub fn is_shared(&self) -> bool

Checks if the value of the field is SHARED

impl R<u32, Reg<u32, _CAPAB0>>

pub fn tmoutclkfreq(&self) -> TMOUTCLKFREQ_R

Bits 0:5 - Timeout Clock Frequency

pub fn tmoutclkunit(&self) -> TMOUTCLKUNIT_R

Bit 7 - Timeout Clock Unit

pub fn baseclkfreqsd(&self) -> BASECLKFREQSD_R

Bits 8:15 - Base Clock Frequency for SD_CLK

pub fn maxblocklen(&self) -> MAXBLOCKLEN_R

Bits 16:17 - Maximum Block Length

pub fn extmediabussup(&self) -> EXTMEDIABUSSUP_R

Bit 18 - Extended Media Bus Support

pub fn adma2sup(&self) -> ADMA2SUP_R

Bit 19 - ADMA2 Support

pub fn hssup(&self) -> HSSUP_R

Bit 21 - High Speed Support

pub fn sdmasup(&self) -> SDMASUP_R

Bit 22 - SDMA Support

pub fn susressup(&self) -> SUSRESSUP_R

Bit 23 - Suspend / Resume Support

pub fn voltsup3p3v(&self) -> VOLTSUP3P3V_R

Bit 24 - Voltage Support 3.3V

pub fn voltsup3p0v(&self) -> VOLTSUP3P0V_R

Bit 25 - Voltage Support 3.0V

pub fn voltsup1p8v(&self) -> VOLTSUP1P8V_R

Bit 26 - Voltage Support 1.8V

pub fn sysbus64bsup(&self) -> SYSBUS64BSUP_R

Bit 28 - System Bus 64-bit Support

pub fn asyncintsup(&self) -> ASYNCINTSUP_R

Bit 29 - Asynchronous Interrupt Support

pub fn ifslottype(&self) -> IFSLOTTYPE_R

Bits 30:31 - Interface Card Slot Type

impl R<u32, Reg<u32, _CAPAB2>>

pub fn sdr50sup(&self) -> SDR50SUP_R

Bit 0 - SDR50 Support

pub fn sdr104sup(&self) -> SDR104SUP_R

Bit 1 - SDR104 Support

pub fn ddr50sup(&self) -> DDR50SUP_R

Bit 2 - DDR50 Support

pub fn drvtypasup(&self) -> DRVTYPASUP_R

Bit 4 - Driver Type a Support

pub fn drvtypcsup(&self) -> DRVTYPCSUP_R

Bit 5 - Driver Type C Support

pub fn drvtypdsup(&self) -> DRVTYPDSUP_R

Bit 6 - Driver Type D Support

pub fn timcntretun(&self) -> TIMCNTRETUN_R

Bits 8:11 - Timer Count for Re-Tuning

pub fn usetunsdr50(&self) -> USETUNSDR50_R

Bit 13 - Use Tuning for SDR50

pub fn retunemodes(&self) -> RETUNEMODES_R

Bits 14:15 - Re-tuning Modes

pub fn clockkmul(&self) -> CLOCKKMUL_R

Bits 16:23 - Clock Multiplier

pub fn spimode(&self) -> SPIMODE_R

Bit 24 - SPI Mode Support

pub fn spiblockmode(&self) -> SPIBLOCKMODE_R

Bit 25 - SPI Block Mode Support

impl R<u32, Reg<u32, _MAXCURCAPAB>>

pub fn maxcur3p3val(&self) -> MAXCUR3P3VAL_R

Bits 0:7 - Maximum Current for 3.3V

pub fn maxcur3p0val(&self) -> MAXCUR3P0VAL_R

Bits 8:15 - Maximum Current for 3.0V

pub fn maxcur1p8val(&self) -> MAXCUR1P8VAL_R

Bits 16:23 - Maximum Current for 1.8V

impl R<u32, Reg<u32, _FEVTERRSTAT>>

pub fn ac12nex(&self) -> AC12NEX_R

Bit 0 - Force Event for Command Not Issued By Auto CM12 Not Executed

pub fn ac12toe(&self) -> AC12TOE_R

Bit 1 - Force Event for Auto CMD Timeout Error

pub fn ac12crce(&self) -> AC12CRCE_R

Bit 2 - Force Event for Auto CMD CRC Error

pub fn ac12ebe(&self) -> AC12EBE_R

Bit 3 - Force Event for Auto CMD End Bit Error

pub fn ac12indxe(&self) -> AC12INDXE_R

Bit 4 - Force Event for Auto CMD Index Error

pub fn cnibac12e(&self) -> CNIBAC12E_R

Bit 7 - Force Event for Command Not Issued By Auto CMD12 Error

pub fn cmdtoe(&self) -> CMDTOE_R

Bit 16 - Force Event for Command Timeout Error

pub fn cmdcrce(&self) -> CMDCRCE_R

Bit 17 - Force Event for Command CRC Error

pub fn cmdebe(&self) -> CMDEBE_R

Bit 18 - Force Event for Command End Bit Error

pub fn cmdindxe(&self) -> CMDINDXE_R

Bit 19 - Force Event for Command Index Error

pub fn dattoe(&self) -> DATTOE_R

Bit 20 - Force Event for Data Timeout Error

pub fn datcrce(&self) -> DATCRCE_R

Bit 21 - Force Event for Data CRC Error

pub fn datebe(&self) -> DATEBE_R

Bit 22 - Force Event for Data End Bit Error

pub fn curlimite(&self) -> CURLIMITE_R

Bit 23 - Force Event for Current Limit Error

pub fn ac12e(&self) -> AC12E_R

Bit 24 - Force Event for Auto CMD Error

pub fn admae(&self) -> ADMAE_R

Bit 25 - Force Event for ADMA Error

pub fn tuninge(&self) -> TUNINGE_R

Bit 26 - Force Event for Tuning Errro

pub fn venspece(&self) -> VENSPECE_R

Bits 28:31 - Force Event for Vendox Specific Error Status

impl R<u32, Reg<u32, _ADMAES>>

pub fn admaes(&self) -> ADMAES_R

Bits 0:1 - ADMA Error State

pub fn admalme(&self) -> ADMALME_R

Bit 2 - ADMA Length Mismatch Error

impl R<u32, Reg<u32, _ADSADDR>>

pub fn adsaddr(&self) -> ADSADDR_R

Bits 0:31 - ADMA System Address

impl R<u8, INITDRVSTVAL_A>

pub fn variant(&self) -> INITDRVSTVAL_A

Get enumerated values variant

pub fn is_typeb(&self) -> bool

Checks if the value of the field is TYPEB

pub fn is_typea(&self) -> bool

Checks if the value of the field is TYPEA

pub fn is_typec(&self) -> bool

Checks if the value of the field is TYPEC

pub fn is_typed(&self) -> bool

Checks if the value of the field is TYPED

impl R<u8, DSPDRVSTVAL_A>

pub fn variant(&self) -> DSPDRVSTVAL_A

Get enumerated values variant

pub fn is_typeb(&self) -> bool

Checks if the value of the field is TYPEB

pub fn is_typea(&self) -> bool

Checks if the value of the field is TYPEA

pub fn is_typec(&self) -> bool

Checks if the value of the field is TYPEC

pub fn is_typed(&self) -> bool

Checks if the value of the field is TYPED

impl R<u32, Reg<u32, _PRSTVAL0>>

pub fn initsdclkfreqval(&self) -> INITSDCLKFREQVAL_R

Bits 0:9 - SD_CLK Frequency Select Value for Initialization

pub fn initclckgenval(&self) -> INITCLCKGENVAL_R

Bit 10 - Clock Generator Select Value for Initialization

pub fn initdrvstval(&self) -> INITDRVSTVAL_R

Bits 14:15 - Driver Strength Select Value for Initialization

pub fn dspsdclkfreqval(&self) -> DSPSDCLKFREQVAL_R

Bits 16:25 - SD_CLK Frequency Select Value for Default Speed

pub fn dspclkgenval(&self) -> DSPCLKGENVAL_R

Bit 26 - Clock Generator Select Value for Default Speed

pub fn dspdrvstval(&self) -> DSPDRVSTVAL_R

Bits 30:31 - Driver Strength Select Value for Default Speed

impl R<u8, HSPDRVSTVAL_A>

pub fn variant(&self) -> HSPDRVSTVAL_A

Get enumerated values variant

pub fn is_typeb(&self) -> bool

Checks if the value of the field is TYPEB

pub fn is_typea(&self) -> bool

Checks if the value of the field is TYPEA

pub fn is_typec(&self) -> bool

Checks if the value of the field is TYPEC

pub fn is_typed(&self) -> bool

Checks if the value of the field is TYPED

impl R<u8, SDR12DRVSTVAL_A>

pub fn variant(&self) -> SDR12DRVSTVAL_A

Get enumerated values variant

pub fn is_typeb(&self) -> bool

Checks if the value of the field is TYPEB

pub fn is_typea(&self) -> bool

Checks if the value of the field is TYPEA

pub fn is_typec(&self) -> bool

Checks if the value of the field is TYPEC

pub fn is_typed(&self) -> bool

Checks if the value of the field is TYPED

impl R<u32, Reg<u32, _PRSTVAL2>>

pub fn hspsdclkfreqval(&self) -> HSPSDCLKFREQVAL_R

Bits 0:9 - SD_CLK Frequency Select Value for High Speed

pub fn hspclkgenval(&self) -> HSPCLKGENVAL_R

Bit 10 - Clock Generator Select Value for High Speed

pub fn hspdrvstval(&self) -> HSPDRVSTVAL_R

Bits 14:15 - Driver Strength Select Value for High Speed

pub fn sdr12sdclkfreqval(&self) -> SDR12SDCLKFREQVAL_R

Bits 16:25 - SD_CLK Frequency Select Value for SDR12

pub fn sdr12clkgenval(&self) -> SDR12CLKGENVAL_R

Bit 26 - Clock Generator Select Value for SDR12

pub fn sdr12drvstval(&self) -> SDR12DRVSTVAL_R

Bits 30:31 - Driver Strength Select Value for SDR12

impl R<u8, SDR25DRVSTVAL_A>

pub fn variant(&self) -> SDR25DRVSTVAL_A

Get enumerated values variant

pub fn is_typeb(&self) -> bool

Checks if the value of the field is TYPEB

pub fn is_typea(&self) -> bool

Checks if the value of the field is TYPEA

pub fn is_typec(&self) -> bool

Checks if the value of the field is TYPEC

pub fn is_typed(&self) -> bool

Checks if the value of the field is TYPED

impl R<u8, SDR50DRVSTVAL_A>

pub fn variant(&self) -> SDR50DRVSTVAL_A

Get enumerated values variant

pub fn is_typeb(&self) -> bool

Checks if the value of the field is TYPEB

pub fn is_typea(&self) -> bool

Checks if the value of the field is TYPEA

pub fn is_typec(&self) -> bool

Checks if the value of the field is TYPEC

pub fn is_typed(&self) -> bool

Checks if the value of the field is TYPED

impl R<u32, Reg<u32, _PRSTVAL4>>

pub fn sdr25sdclkfreqval(&self) -> SDR25SDCLKFREQVAL_R

Bits 0:9 - SD_CLK Frequency Select Value for SDR25

pub fn sdr25clkgenval(&self) -> SDR25CLKGENVAL_R

Bit 10 - Clock Generator Select Value for SDR25

pub fn sdr25drvstval(&self) -> SDR25DRVSTVAL_R

Bits 14:15 - Driver Strength Select Value for SDR25

pub fn sdr50sdclkfreqval(&self) -> SDR50SDCLKFREQVAL_R

Bits 16:25 - SD_CLK Frequency Select Value for SDR50

pub fn sdr50clckgenval(&self) -> SDR50CLCKGENVAL_R

Bit 26 - Clock Generator Select Value for SDR50

pub fn sdr50drvstval(&self) -> SDR50DRVSTVAL_R

Bits 30:31 - Driver Strength Select Value for SDR50

impl R<u8, SDR104DRVSTVAL_A>

pub fn variant(&self) -> SDR104DRVSTVAL_A

Get enumerated values variant

pub fn is_typeb(&self) -> bool

Checks if the value of the field is TYPEB

pub fn is_typea(&self) -> bool

Checks if the value of the field is TYPEA

pub fn is_typec(&self) -> bool

Checks if the value of the field is TYPEC

pub fn is_typed(&self) -> bool

Checks if the value of the field is TYPED

impl R<u8, DDR50DRVSTVAL_A>

pub fn variant(&self) -> DDR50DRVSTVAL_A

Get enumerated values variant

pub fn is_typeb(&self) -> bool

Checks if the value of the field is TYPEB

pub fn is_typea(&self) -> bool

Checks if the value of the field is TYPEA

pub fn is_typec(&self) -> bool

Checks if the value of the field is TYPEC

pub fn is_typed(&self) -> bool

Checks if the value of the field is TYPED

impl R<u32, Reg<u32, _PRSTVAL6>>

pub fn sdr104sdclkfreqval(&self) -> SDR104SDCLKFREQVAL_R

Bits 0:9 - SD_CLK Frequency Select Value for SDR104

pub fn sdr104clkgenval(&self) -> SDR104CLKGENVAL_R

Bit 10 - Clock Generator Select Value for SDR104

pub fn sdr104drvstval(&self) -> SDR104DRVSTVAL_R

Bits 14:15 - Driver Strength Select Value for SDR104

pub fn ddr50sdclkfreqval(&self) -> DDR50SDCLKFREQVAL_R

Bits 16:25 - SD_CLK Frequency Select Value for DDR50

pub fn ddr50clkgenval(&self) -> DDR50CLKGENVAL_R

Bit 26 - Clock Generator Select Value for DDR50

pub fn ddr50drvstval(&self) -> DDR50DRVSTVAL_R

Bits 30:31 - Driver Strength Select Value for DDR50

impl R<u32, Reg<u32, _BOOTTOCTRL>>

pub fn bootdattocnt(&self) -> BOOTDATTOCNT_R

Bits 0:31 - Boot Data Timeout Counter Value

impl R<u32, Reg<u32, _SLOTINTSTAT>>

pub fn intslot0(&self) -> INTSLOT0_R

Bit 0 - Interrupt Signal for Slot#0

pub fn specvernum(&self) -> SPECVERNUM_R

Bits 16:23 - Host Controller Compliant Spec Version Number

pub fn vendvernum(&self) -> VENDVERNUM_R

Bits 24:31 - Vendor Version Number

impl R<u32, Reg<u32, _CTRL>>

pub fn itapdlyen(&self) -> ITAPDLYEN_R

Bit 0 - Selective Tap Delay Line Enable on Rxclk_in

pub fn itapdlysel(&self) -> ITAPDLYSEL_R

Bits 1:5 - Selects One of 32 Taps on the Rxclk_in Line

pub fn itapchgwin(&self) -> ITAPCHGWIN_R

Bit 6 - Gating Signal for Tap Delay Change

pub fn otapdlyen(&self) -> OTAPDLYEN_R

Bit 7 - Selective Tap Delay Line Enable on SDIO_CLK Pin

pub fn otapdlysel(&self) -> OTAPDLYSEL_R

Bits 8:11 - Selects One of 32 Taps on the SDIO_CLK Pin

pub fn txdlymuxsel(&self) -> TXDLYMUXSEL_R

Bits 16:17 - TX Delay Mux Selection

impl R<u8, MAXBLKLEN_A>

pub fn variant(&self) -> Variant<u8, MAXBLKLEN_A>

Get enumerated values variant

pub fn is_512b(&self) -> bool

Checks if the value of the field is _512B

pub fn is_1024b(&self) -> bool

Checks if the value of the field is _1024B

pub fn is_2048b(&self) -> bool

Checks if the value of the field is _2048B

impl R<u32, Reg<u32, _CFG0>>

pub fn tuningcnt(&self) -> TUNINGCNT_R

Bits 0:5 - Tuning Counter Value

pub fn toutclkfreq(&self) -> TOUTCLKFREQ_R

Bits 6:11 - Timeout Clock Frequency

pub fn toutclkunit(&self) -> TOUTCLKUNIT_R

Bit 12 - Timeout Clock Unit in kHz or MHz

pub fn baseclkfreq(&self) -> BASECLKFREQ_R

Bits 13:20 - Base Clock Frequency for SD_CLK

pub fn maxblklen(&self) -> MAXBLKLEN_R

Bits 21:22 - MAX Block Length of Transfer

pub fn c8bitsup(&self) -> C8BITSUP_R

Bit 23 - 8-bit Interface Support

pub fn cadma2sup(&self) -> CADMA2SUP_R

Bit 24 - ADMA2 Mode Support

pub fn chssup(&self) -> CHSSUP_R

Bit 25 - High Speed Mode Support

pub fn csdmasup(&self) -> CSDMASUP_R

Bit 26 - SDMA Mode Support

pub fn csuspressup(&self) -> CSUSPRESSUP_R

Bit 27 - Suspend/Resume Support

pub fn c3p3vsup(&self) -> C3P3VSUP_R

Bit 28 - Core 3P3V Support

pub fn c3p0vsup(&self) -> C3P0VSUP_R

Bit 29 - 3P0V Support

pub fn c1p8vsup(&self) -> C1P8VSUP_R

Bit 30 - 1P8V Support

impl R<u8, SLOTTYPE_A>

pub fn variant(&self) -> Variant<u8, SLOTTYPE_A>

Get enumerated values variant

pub fn is_rmsdslot(&self) -> bool

Checks if the value of the field is RMSDSLOT

pub fn is_emsdslot(&self) -> bool

Checks if the value of the field is EMSDSLOT

pub fn is_shbusslot(&self) -> bool

Checks if the value of the field is SHBUSSLOT

impl R<u32, Reg<u32, _CFG1>>

pub fn asyncintrsup(&self) -> ASYNCINTRSUP_R

Bit 0 - Asynchronous Interrupt Support

pub fn slottype(&self) -> SLOTTYPE_R

Bits 1:2 - Slot Type

pub fn csdr50sup(&self) -> CSDR50SUP_R

Bit 3 - Core Support SDR50

pub fn csdr104sup(&self) -> CSDR104SUP_R

Bit 4 - Support SDR104

pub fn cddr50sup(&self) -> CDDR50SUP_R

Bit 5 - Support DDR50

pub fn cdrvasup(&self) -> CDRVASUP_R

Bit 6 - Support Type a Driver

pub fn cdrvcsup(&self) -> CDRVCSUP_R

Bit 7 - Support Type C Driver

pub fn cdrvdsup(&self) -> CDRVDSUP_R

Bit 8 - Support Type D Driver

pub fn retuntmrctl(&self) -> RETUNTMRCTL_R

Bits 9:12 - Retuning Timer Control

pub fn tunsdr50(&self) -> TUNSDR50_R

Bit 13 - Tuning for SDR50

pub fn retunmodes(&self) -> RETUNMODES_R

Bits 14:15 - Retuning Modes

pub fn spisup(&self) -> SPISUP_R

Bit 16 - SPI Support

pub fn asyncwkupen(&self) -> ASYNCWKUPEN_R

Bit 18 - Asynchronous Wakeup Enable

impl R<u32, Reg<u32, _CFGPRESETVAL0>>

pub fn initsdclkfreq(&self) -> INITSDCLKFREQ_R

Bits 0:9 - Initial SD_CLK Frequency

pub fn initclkgenen(&self) -> INITCLKGENEN_R

Bit 10 - Initial Clock Gen Enable

pub fn initdrvst(&self) -> INITDRVST_R

Bits 11:12 - Initial Drive Strength

pub fn dspsdclkfreq(&self) -> DSPSDCLKFREQ_R

Bits 16:25 - Preset Value for Default Speed of SD_CLK

pub fn dspclkgenen(&self) -> DSPCLKGENEN_R

Bit 26 - Default Speed Clock Gen Enable

pub fn dspdrvst(&self) -> DSPDRVST_R

Bits 27:28 - Default Speed Drive Strength

impl R<u32, Reg<u32, _CFGPRESETVAL1>>

pub fn hspsdclkfreq(&self) -> HSPSDCLKFREQ_R

Bits 0:9 - High Speed SD_CLK Frequency

pub fn hspclkgenen(&self) -> HSPCLKGENEN_R

Bit 10 - High Speed SD_CLK Gen Enable

pub fn hspdrvst(&self) -> HSPDRVST_R

Bits 11:12 - High Speed SD Drive Strength

pub fn sdr12sdclkfreq(&self) -> SDR12SDCLKFREQ_R

Bits 16:25 - Preset Value for SDR12 Speed of SD_CLK

pub fn sdr12clkgenen(&self) -> SDR12CLKGENEN_R

Bit 26 - SDR12 Speed Clock Gen Enable

pub fn sdr12drvst(&self) -> SDR12DRVST_R

Bits 27:28 - SDR12 Speed Drive Strength

impl R<u32, Reg<u32, _CFGPRESETVAL2>>

pub fn sdr25sdclkfreq(&self) -> SDR25SDCLKFREQ_R

Bits 0:9 - SDR25 SD_CLK Frequency

pub fn sdr25clkgenen(&self) -> SDR25CLKGENEN_R

Bit 10 - SDR25 SD_CLK Gen Enable

pub fn sdr25drvst(&self) -> SDR25DRVST_R

Bits 11:12 - SDR25 SD Drive Strength

pub fn sdr50sdclkfreq(&self) -> SDR50SDCLKFREQ_R

Bits 16:25 - Preset Value for SDR50 Speed of SD_CLK

pub fn sdr50clkgenen(&self) -> SDR50CLKGENEN_R

Bit 26 - SDR50 Speed Clock Gen Enable

pub fn sdr50drvst(&self) -> SDR50DRVST_R

Bits 27:28 - SDR50 Speed Drive Strength

impl R<u32, Reg<u32, _CFGPRESETVAL3>>

pub fn sdr104sdclkfreq(&self) -> SDR104SDCLKFREQ_R

Bits 0:9 - SDR104 SD_CLK Frequency

pub fn sdr104clkgenen(&self) -> SDR104CLKGENEN_R

Bit 10 - SDR104 SD_CLK Gen Enable

pub fn sdr104drvst(&self) -> SDR104DRVST_R

Bits 11:12 - SDR104 SD Drive Strength

pub fn ddr50sdclkfreq(&self) -> DDR50SDCLKFREQ_R

Bits 16:25 - Preset Value for DDR50 Speed of SD_CLK

pub fn ddr50clkgenen(&self) -> DDR50CLKGENEN_R

Bit 26 - DDR50 Speed Clock Gen Enable

pub fn ddr50drvst(&self) -> DDR50DRVST_R

Bits 27:28 - DDR50 Speed Drive Strength

impl R<u8, DATLOC_A>

pub fn variant(&self) -> Variant<u8, DATLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

impl R<u8, CDLOC_A>

pub fn variant(&self) -> Variant<u8, CDLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

impl R<u8, WPLOC_A>

pub fn variant(&self) -> Variant<u8, WPLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

impl R<u8, CLKLOC_A>

pub fn variant(&self) -> Variant<u8, CLKLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn datloc(&self) -> DATLOC_R

Bits 0:5 - I/O Location for D0-7 Pins

pub fn cdloc(&self) -> CDLOC_R

Bits 8:13 - I/O Location for CD

pub fn wploc(&self) -> WPLOC_R

Bits 16:21 - I/O Location for WP

pub fn clkloc(&self) -> CLKLOC_R

Bits 24:29 - I/O Location for CLK

impl R<u8, CMDLOC_A>

pub fn variant(&self) -> Variant<u8, CMDLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

impl R<u32, Reg<u32, _ROUTELOC1>>

pub fn cmdloc(&self) -> CMDLOC_R

Bits 0:5 - I/O Location for CMD Pin

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn clkpen(&self) -> CLKPEN_R

Bit 0 - CLK I/O Enable

pub fn cmdpen(&self) -> CMDPEN_R

Bit 1 - CMD I/O Enable

pub fn d0pen(&self) -> D0PEN_R

Bit 2 - Dat0 I/O Enable

pub fn d1pen(&self) -> D1PEN_R

Bit 3 - Dat1 I/O Enable

pub fn d2pen(&self) -> D2PEN_R

Bit 4 - Dat2 I/O Enable

pub fn d3pen(&self) -> D3PEN_R

Bit 5 - Dat3 I/O Enable

pub fn d4pen(&self) -> D4PEN_R

Bit 6 - Dat4 I/O Enable

pub fn d5pen(&self) -> D5PEN_R

Bit 7 - Dat5 Enable

pub fn d6pen(&self) -> D6PEN_R

Bit 8 - Dat6 Enable

pub fn d7pen(&self) -> D7PEN_R

Bit 9 - Data7 I/O Enable

impl R<u32, Reg<u32, _PA_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bit 0 - Drive Strength for Port

pub fn slewrate(&self) -> SLEWRATE_R

Bits 4:6 - Slewrate Limit for Port

pub fn dindis(&self) -> DINDIS_R

Bit 12 - Data in Disable

pub fn drivestrengthalt(&self) -> DRIVESTRENGTHALT_R

Bit 16 - Alternate Drive Strength for Port

pub fn slewratealt(&self) -> SLEWRATEALT_R

Bits 20:22 - Alternate Slewrate Limit for Port

pub fn dindisalt(&self) -> DINDISALT_R

Bit 28 - Alternate Data in Disable

impl R<u8, MODE0_A>

pub fn variant(&self) -> MODE0_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE1_A>

pub fn variant(&self) -> MODE1_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE2_A>

pub fn variant(&self) -> MODE2_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE3_A>

pub fn variant(&self) -> MODE3_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE4_A>

pub fn variant(&self) -> MODE4_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE5_A>

pub fn variant(&self) -> MODE5_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE6_A>

pub fn variant(&self) -> MODE6_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE7_A>

pub fn variant(&self) -> MODE7_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PA_MODEL>>

pub fn mode0(&self) -> MODE0_R

Bits 0:3 - Pin 0 Mode

pub fn mode1(&self) -> MODE1_R

Bits 4:7 - Pin 1 Mode

pub fn mode2(&self) -> MODE2_R

Bits 8:11 - Pin 2 Mode

pub fn mode3(&self) -> MODE3_R

Bits 12:15 - Pin 3 Mode

pub fn mode4(&self) -> MODE4_R

Bits 16:19 - Pin 4 Mode

pub fn mode5(&self) -> MODE5_R

Bits 20:23 - Pin 5 Mode

pub fn mode6(&self) -> MODE6_R

Bits 24:27 - Pin 6 Mode

pub fn mode7(&self) -> MODE7_R

Bits 28:31 - Pin 7 Mode

impl R<u8, MODE8_A>

pub fn variant(&self) -> MODE8_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE9_A>

pub fn variant(&self) -> MODE9_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE10_A>

pub fn variant(&self) -> MODE10_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE11_A>

pub fn variant(&self) -> MODE11_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE12_A>

pub fn variant(&self) -> MODE12_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE13_A>

pub fn variant(&self) -> MODE13_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE14_A>

pub fn variant(&self) -> MODE14_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE15_A>

pub fn variant(&self) -> MODE15_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PA_MODEH>>

pub fn mode8(&self) -> MODE8_R

Bits 0:3 - Pin 8 Mode

pub fn mode9(&self) -> MODE9_R

Bits 4:7 - Pin 9 Mode

pub fn mode10(&self) -> MODE10_R

Bits 8:11 - Pin 10 Mode

pub fn mode11(&self) -> MODE11_R

Bits 12:15 - Pin 11 Mode

pub fn mode12(&self) -> MODE12_R

Bits 16:19 - Pin 12 Mode

pub fn mode13(&self) -> MODE13_R

Bits 20:23 - Pin 13 Mode

pub fn mode14(&self) -> MODE14_R

Bits 24:27 - Pin 14 Mode

pub fn mode15(&self) -> MODE15_R

Bits 28:31 - Pin 15 Mode

impl R<u32, Reg<u32, _PA_DOUT>>

pub fn dout(&self) -> DOUT_R

Bits 0:15 - Data Out

impl R<u32, Reg<u32, _PA_DIN>>

pub fn din(&self) -> DIN_R

Bits 0:15 - Data in

impl R<u32, Reg<u32, _PA_PINLOCKN>>

pub fn pinlockn(&self) -> PINLOCKN_R

Bits 0:15 - Unlocked Pins

impl R<u32, Reg<u32, _PA_OVTDIS>>

pub fn ovtdis(&self) -> OVTDIS_R

Bits 0:15 - Disable Over Voltage Capability

impl R<u32, Reg<u32, _PB_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bit 0 - Drive Strength for Port

pub fn slewrate(&self) -> SLEWRATE_R

Bits 4:6 - Slewrate Limit for Port

pub fn dindis(&self) -> DINDIS_R

Bit 12 - Data in Disable

pub fn drivestrengthalt(&self) -> DRIVESTRENGTHALT_R

Bit 16 - Alternate Drive Strength for Port

pub fn slewratealt(&self) -> SLEWRATEALT_R

Bits 20:22 - Alternate Slewrate Limit for Port

pub fn dindisalt(&self) -> DINDISALT_R

Bit 28 - Alternate Data in Disable

impl R<u8, MODE0_A>

pub fn variant(&self) -> MODE0_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE1_A>

pub fn variant(&self) -> MODE1_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE2_A>

pub fn variant(&self) -> MODE2_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE3_A>

pub fn variant(&self) -> MODE3_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE4_A>

pub fn variant(&self) -> MODE4_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE5_A>

pub fn variant(&self) -> MODE5_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE6_A>

pub fn variant(&self) -> MODE6_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE7_A>

pub fn variant(&self) -> MODE7_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PB_MODEL>>

pub fn mode0(&self) -> MODE0_R

Bits 0:3 - Pin 0 Mode

pub fn mode1(&self) -> MODE1_R

Bits 4:7 - Pin 1 Mode

pub fn mode2(&self) -> MODE2_R

Bits 8:11 - Pin 2 Mode

pub fn mode3(&self) -> MODE3_R

Bits 12:15 - Pin 3 Mode

pub fn mode4(&self) -> MODE4_R

Bits 16:19 - Pin 4 Mode

pub fn mode5(&self) -> MODE5_R

Bits 20:23 - Pin 5 Mode

pub fn mode6(&self) -> MODE6_R

Bits 24:27 - Pin 6 Mode

pub fn mode7(&self) -> MODE7_R

Bits 28:31 - Pin 7 Mode

impl R<u8, MODE8_A>

pub fn variant(&self) -> MODE8_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE9_A>

pub fn variant(&self) -> MODE9_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE10_A>

pub fn variant(&self) -> MODE10_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE11_A>

pub fn variant(&self) -> MODE11_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE12_A>

pub fn variant(&self) -> MODE12_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE13_A>

pub fn variant(&self) -> MODE13_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE14_A>

pub fn variant(&self) -> MODE14_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE15_A>

pub fn variant(&self) -> MODE15_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PB_MODEH>>

pub fn mode8(&self) -> MODE8_R

Bits 0:3 - Pin 8 Mode

pub fn mode9(&self) -> MODE9_R

Bits 4:7 - Pin 9 Mode

pub fn mode10(&self) -> MODE10_R

Bits 8:11 - Pin 10 Mode

pub fn mode11(&self) -> MODE11_R

Bits 12:15 - Pin 11 Mode

pub fn mode12(&self) -> MODE12_R

Bits 16:19 - Pin 12 Mode

pub fn mode13(&self) -> MODE13_R

Bits 20:23 - Pin 13 Mode

pub fn mode14(&self) -> MODE14_R

Bits 24:27 - Pin 14 Mode

pub fn mode15(&self) -> MODE15_R

Bits 28:31 - Pin 15 Mode

impl R<u32, Reg<u32, _PB_DOUT>>

pub fn dout(&self) -> DOUT_R

Bits 0:15 - Data Out

impl R<u32, Reg<u32, _PB_DIN>>

pub fn din(&self) -> DIN_R

Bits 0:15 - Data in

impl R<u32, Reg<u32, _PB_PINLOCKN>>

pub fn pinlockn(&self) -> PINLOCKN_R

Bits 0:15 - Unlocked Pins

impl R<u32, Reg<u32, _PB_OVTDIS>>

pub fn ovtdis(&self) -> OVTDIS_R

Bits 0:15 - Disable Over Voltage Capability

impl R<u32, Reg<u32, _PC_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bit 0 - Drive Strength for Port

pub fn slewrate(&self) -> SLEWRATE_R

Bits 4:6 - Slewrate Limit for Port

pub fn dindis(&self) -> DINDIS_R

Bit 12 - Data in Disable

pub fn drivestrengthalt(&self) -> DRIVESTRENGTHALT_R

Bit 16 - Alternate Drive Strength for Port

pub fn slewratealt(&self) -> SLEWRATEALT_R

Bits 20:22 - Alternate Slewrate Limit for Port

pub fn dindisalt(&self) -> DINDISALT_R

Bit 28 - Alternate Data in Disable

impl R<u8, MODE0_A>

pub fn variant(&self) -> MODE0_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE1_A>

pub fn variant(&self) -> MODE1_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE2_A>

pub fn variant(&self) -> MODE2_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE3_A>

pub fn variant(&self) -> MODE3_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE4_A>

pub fn variant(&self) -> MODE4_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE5_A>

pub fn variant(&self) -> MODE5_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE6_A>

pub fn variant(&self) -> MODE6_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE7_A>

pub fn variant(&self) -> MODE7_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PC_MODEL>>

pub fn mode0(&self) -> MODE0_R

Bits 0:3 - Pin 0 Mode

pub fn mode1(&self) -> MODE1_R

Bits 4:7 - Pin 1 Mode

pub fn mode2(&self) -> MODE2_R

Bits 8:11 - Pin 2 Mode

pub fn mode3(&self) -> MODE3_R

Bits 12:15 - Pin 3 Mode

pub fn mode4(&self) -> MODE4_R

Bits 16:19 - Pin 4 Mode

pub fn mode5(&self) -> MODE5_R

Bits 20:23 - Pin 5 Mode

pub fn mode6(&self) -> MODE6_R

Bits 24:27 - Pin 6 Mode

pub fn mode7(&self) -> MODE7_R

Bits 28:31 - Pin 7 Mode

impl R<u8, MODE8_A>

pub fn variant(&self) -> MODE8_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE9_A>

pub fn variant(&self) -> MODE9_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE10_A>

pub fn variant(&self) -> MODE10_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE11_A>

pub fn variant(&self) -> MODE11_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE12_A>

pub fn variant(&self) -> MODE12_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE13_A>

pub fn variant(&self) -> MODE13_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE14_A>

pub fn variant(&self) -> MODE14_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE15_A>

pub fn variant(&self) -> MODE15_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PC_MODEH>>

pub fn mode8(&self) -> MODE8_R

Bits 0:3 - Pin 8 Mode

pub fn mode9(&self) -> MODE9_R

Bits 4:7 - Pin 9 Mode

pub fn mode10(&self) -> MODE10_R

Bits 8:11 - Pin 10 Mode

pub fn mode11(&self) -> MODE11_R

Bits 12:15 - Pin 11 Mode

pub fn mode12(&self) -> MODE12_R

Bits 16:19 - Pin 12 Mode

pub fn mode13(&self) -> MODE13_R

Bits 20:23 - Pin 13 Mode

pub fn mode14(&self) -> MODE14_R

Bits 24:27 - Pin 14 Mode

pub fn mode15(&self) -> MODE15_R

Bits 28:31 - Pin 15 Mode

impl R<u32, Reg<u32, _PC_DOUT>>

pub fn dout(&self) -> DOUT_R

Bits 0:15 - Data Out

impl R<u32, Reg<u32, _PC_DIN>>

pub fn din(&self) -> DIN_R

Bits 0:15 - Data in

impl R<u32, Reg<u32, _PC_PINLOCKN>>

pub fn pinlockn(&self) -> PINLOCKN_R

Bits 0:15 - Unlocked Pins

impl R<u32, Reg<u32, _PC_OVTDIS>>

pub fn ovtdis(&self) -> OVTDIS_R

Bits 0:15 - Disable Over Voltage Capability

impl R<u32, Reg<u32, _PD_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bit 0 - Drive Strength for Port

pub fn slewrate(&self) -> SLEWRATE_R

Bits 4:6 - Slewrate Limit for Port

pub fn dindis(&self) -> DINDIS_R

Bit 12 - Data in Disable

pub fn drivestrengthalt(&self) -> DRIVESTRENGTHALT_R

Bit 16 - Alternate Drive Strength for Port

pub fn slewratealt(&self) -> SLEWRATEALT_R

Bits 20:22 - Alternate Slewrate Limit for Port

pub fn dindisalt(&self) -> DINDISALT_R

Bit 28 - Alternate Data in Disable

impl R<u8, MODE0_A>

pub fn variant(&self) -> MODE0_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE1_A>

pub fn variant(&self) -> MODE1_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE2_A>

pub fn variant(&self) -> MODE2_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE3_A>

pub fn variant(&self) -> MODE3_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE4_A>

pub fn variant(&self) -> MODE4_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE5_A>

pub fn variant(&self) -> MODE5_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE6_A>

pub fn variant(&self) -> MODE6_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE7_A>

pub fn variant(&self) -> MODE7_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PD_MODEL>>

pub fn mode0(&self) -> MODE0_R

Bits 0:3 - Pin 0 Mode

pub fn mode1(&self) -> MODE1_R

Bits 4:7 - Pin 1 Mode

pub fn mode2(&self) -> MODE2_R

Bits 8:11 - Pin 2 Mode

pub fn mode3(&self) -> MODE3_R

Bits 12:15 - Pin 3 Mode

pub fn mode4(&self) -> MODE4_R

Bits 16:19 - Pin 4 Mode

pub fn mode5(&self) -> MODE5_R

Bits 20:23 - Pin 5 Mode

pub fn mode6(&self) -> MODE6_R

Bits 24:27 - Pin 6 Mode

pub fn mode7(&self) -> MODE7_R

Bits 28:31 - Pin 7 Mode

impl R<u8, MODE8_A>

pub fn variant(&self) -> MODE8_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE9_A>

pub fn variant(&self) -> MODE9_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE10_A>

pub fn variant(&self) -> MODE10_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE11_A>

pub fn variant(&self) -> MODE11_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE12_A>

pub fn variant(&self) -> MODE12_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE13_A>

pub fn variant(&self) -> MODE13_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE14_A>

pub fn variant(&self) -> MODE14_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE15_A>

pub fn variant(&self) -> MODE15_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PD_MODEH>>

pub fn mode8(&self) -> MODE8_R

Bits 0:3 - Pin 8 Mode

pub fn mode9(&self) -> MODE9_R

Bits 4:7 - Pin 9 Mode

pub fn mode10(&self) -> MODE10_R

Bits 8:11 - Pin 10 Mode

pub fn mode11(&self) -> MODE11_R

Bits 12:15 - Pin 11 Mode

pub fn mode12(&self) -> MODE12_R

Bits 16:19 - Pin 12 Mode

pub fn mode13(&self) -> MODE13_R

Bits 20:23 - Pin 13 Mode

pub fn mode14(&self) -> MODE14_R

Bits 24:27 - Pin 14 Mode

pub fn mode15(&self) -> MODE15_R

Bits 28:31 - Pin 15 Mode

impl R<u32, Reg<u32, _PD_DOUT>>

pub fn dout(&self) -> DOUT_R

Bits 0:15 - Data Out

impl R<u32, Reg<u32, _PD_DIN>>

pub fn din(&self) -> DIN_R

Bits 0:15 - Data in

impl R<u32, Reg<u32, _PD_PINLOCKN>>

pub fn pinlockn(&self) -> PINLOCKN_R

Bits 0:15 - Unlocked Pins

impl R<u32, Reg<u32, _PD_OVTDIS>>

pub fn ovtdis(&self) -> OVTDIS_R

Bits 0:15 - Disable Over Voltage Capability

impl R<u32, Reg<u32, _PE_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bit 0 - Drive Strength for Port

pub fn slewrate(&self) -> SLEWRATE_R

Bits 4:6 - Slewrate Limit for Port

pub fn dindis(&self) -> DINDIS_R

Bit 12 - Data in Disable

pub fn drivestrengthalt(&self) -> DRIVESTRENGTHALT_R

Bit 16 - Alternate Drive Strength for Port

pub fn slewratealt(&self) -> SLEWRATEALT_R

Bits 20:22 - Alternate Slewrate Limit for Port

pub fn dindisalt(&self) -> DINDISALT_R

Bit 28 - Alternate Data in Disable

impl R<u8, MODE0_A>

pub fn variant(&self) -> MODE0_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE1_A>

pub fn variant(&self) -> MODE1_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE2_A>

pub fn variant(&self) -> MODE2_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE3_A>

pub fn variant(&self) -> MODE3_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE4_A>

pub fn variant(&self) -> MODE4_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE5_A>

pub fn variant(&self) -> MODE5_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE6_A>

pub fn variant(&self) -> MODE6_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE7_A>

pub fn variant(&self) -> MODE7_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PE_MODEL>>

pub fn mode0(&self) -> MODE0_R

Bits 0:3 - Pin 0 Mode

pub fn mode1(&self) -> MODE1_R

Bits 4:7 - Pin 1 Mode

pub fn mode2(&self) -> MODE2_R

Bits 8:11 - Pin 2 Mode

pub fn mode3(&self) -> MODE3_R

Bits 12:15 - Pin 3 Mode

pub fn mode4(&self) -> MODE4_R

Bits 16:19 - Pin 4 Mode

pub fn mode5(&self) -> MODE5_R

Bits 20:23 - Pin 5 Mode

pub fn mode6(&self) -> MODE6_R

Bits 24:27 - Pin 6 Mode

pub fn mode7(&self) -> MODE7_R

Bits 28:31 - Pin 7 Mode

impl R<u8, MODE8_A>

pub fn variant(&self) -> MODE8_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE9_A>

pub fn variant(&self) -> MODE9_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE10_A>

pub fn variant(&self) -> MODE10_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE11_A>

pub fn variant(&self) -> MODE11_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE12_A>

pub fn variant(&self) -> MODE12_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE13_A>

pub fn variant(&self) -> MODE13_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE14_A>

pub fn variant(&self) -> MODE14_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE15_A>

pub fn variant(&self) -> MODE15_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PE_MODEH>>

pub fn mode8(&self) -> MODE8_R

Bits 0:3 - Pin 8 Mode

pub fn mode9(&self) -> MODE9_R

Bits 4:7 - Pin 9 Mode

pub fn mode10(&self) -> MODE10_R

Bits 8:11 - Pin 10 Mode

pub fn mode11(&self) -> MODE11_R

Bits 12:15 - Pin 11 Mode

pub fn mode12(&self) -> MODE12_R

Bits 16:19 - Pin 12 Mode

pub fn mode13(&self) -> MODE13_R

Bits 20:23 - Pin 13 Mode

pub fn mode14(&self) -> MODE14_R

Bits 24:27 - Pin 14 Mode

pub fn mode15(&self) -> MODE15_R

Bits 28:31 - Pin 15 Mode

impl R<u32, Reg<u32, _PE_DOUT>>

pub fn dout(&self) -> DOUT_R

Bits 0:15 - Data Out

impl R<u32, Reg<u32, _PE_DIN>>

pub fn din(&self) -> DIN_R

Bits 0:15 - Data in

impl R<u32, Reg<u32, _PE_PINLOCKN>>

pub fn pinlockn(&self) -> PINLOCKN_R

Bits 0:15 - Unlocked Pins

impl R<u32, Reg<u32, _PE_OVTDIS>>

pub fn ovtdis(&self) -> OVTDIS_R

Bits 0:15 - Disable Over Voltage Capability

impl R<u32, Reg<u32, _PF_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bit 0 - Drive Strength for Port

pub fn slewrate(&self) -> SLEWRATE_R

Bits 4:6 - Slewrate Limit for Port

pub fn dindis(&self) -> DINDIS_R

Bit 12 - Data in Disable

pub fn drivestrengthalt(&self) -> DRIVESTRENGTHALT_R

Bit 16 - Alternate Drive Strength for Port

pub fn slewratealt(&self) -> SLEWRATEALT_R

Bits 20:22 - Alternate Slewrate Limit for Port

pub fn dindisalt(&self) -> DINDISALT_R

Bit 28 - Alternate Data in Disable

impl R<u8, MODE0_A>

pub fn variant(&self) -> MODE0_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE1_A>

pub fn variant(&self) -> MODE1_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE2_A>

pub fn variant(&self) -> MODE2_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE3_A>

pub fn variant(&self) -> MODE3_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE4_A>

pub fn variant(&self) -> MODE4_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE5_A>

pub fn variant(&self) -> MODE5_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE6_A>

pub fn variant(&self) -> MODE6_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE7_A>

pub fn variant(&self) -> MODE7_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PF_MODEL>>

pub fn mode0(&self) -> MODE0_R

Bits 0:3 - Pin 0 Mode

pub fn mode1(&self) -> MODE1_R

Bits 4:7 - Pin 1 Mode

pub fn mode2(&self) -> MODE2_R

Bits 8:11 - Pin 2 Mode

pub fn mode3(&self) -> MODE3_R

Bits 12:15 - Pin 3 Mode

pub fn mode4(&self) -> MODE4_R

Bits 16:19 - Pin 4 Mode

pub fn mode5(&self) -> MODE5_R

Bits 20:23 - Pin 5 Mode

pub fn mode6(&self) -> MODE6_R

Bits 24:27 - Pin 6 Mode

pub fn mode7(&self) -> MODE7_R

Bits 28:31 - Pin 7 Mode

impl R<u8, MODE8_A>

pub fn variant(&self) -> MODE8_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE9_A>

pub fn variant(&self) -> MODE9_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE10_A>

pub fn variant(&self) -> MODE10_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE11_A>

pub fn variant(&self) -> MODE11_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE12_A>

pub fn variant(&self) -> MODE12_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE13_A>

pub fn variant(&self) -> MODE13_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE14_A>

pub fn variant(&self) -> MODE14_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE15_A>

pub fn variant(&self) -> MODE15_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PF_MODEH>>

pub fn mode8(&self) -> MODE8_R

Bits 0:3 - Pin 8 Mode

pub fn mode9(&self) -> MODE9_R

Bits 4:7 - Pin 9 Mode

pub fn mode10(&self) -> MODE10_R

Bits 8:11 - Pin 10 Mode

pub fn mode11(&self) -> MODE11_R

Bits 12:15 - Pin 11 Mode

pub fn mode12(&self) -> MODE12_R

Bits 16:19 - Pin 12 Mode

pub fn mode13(&self) -> MODE13_R

Bits 20:23 - Pin 13 Mode

pub fn mode14(&self) -> MODE14_R

Bits 24:27 - Pin 14 Mode

pub fn mode15(&self) -> MODE15_R

Bits 28:31 - Pin 15 Mode

impl R<u32, Reg<u32, _PF_DOUT>>

pub fn dout(&self) -> DOUT_R

Bits 0:15 - Data Out

impl R<u32, Reg<u32, _PF_DIN>>

pub fn din(&self) -> DIN_R

Bits 0:15 - Data in

impl R<u32, Reg<u32, _PF_PINLOCKN>>

pub fn pinlockn(&self) -> PINLOCKN_R

Bits 0:15 - Unlocked Pins

impl R<u32, Reg<u32, _PF_OVTDIS>>

pub fn ovtdis(&self) -> OVTDIS_R

Bits 0:15 - Disable Over Voltage Capability

impl R<u32, Reg<u32, _PG_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bit 0 - Drive Strength for Port

pub fn slewrate(&self) -> SLEWRATE_R

Bits 4:6 - Slewrate Limit for Port

pub fn dindis(&self) -> DINDIS_R

Bit 12 - Data in Disable

pub fn drivestrengthalt(&self) -> DRIVESTRENGTHALT_R

Bit 16 - Alternate Drive Strength for Port

pub fn slewratealt(&self) -> SLEWRATEALT_R

Bits 20:22 - Alternate Slewrate Limit for Port

pub fn dindisalt(&self) -> DINDISALT_R

Bit 28 - Alternate Data in Disable

impl R<u8, MODE0_A>

pub fn variant(&self) -> MODE0_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE1_A>

pub fn variant(&self) -> MODE1_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE2_A>

pub fn variant(&self) -> MODE2_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE3_A>

pub fn variant(&self) -> MODE3_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE4_A>

pub fn variant(&self) -> MODE4_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE5_A>

pub fn variant(&self) -> MODE5_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE6_A>

pub fn variant(&self) -> MODE6_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE7_A>

pub fn variant(&self) -> MODE7_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PG_MODEL>>

pub fn mode0(&self) -> MODE0_R

Bits 0:3 - Pin 0 Mode

pub fn mode1(&self) -> MODE1_R

Bits 4:7 - Pin 1 Mode

pub fn mode2(&self) -> MODE2_R

Bits 8:11 - Pin 2 Mode

pub fn mode3(&self) -> MODE3_R

Bits 12:15 - Pin 3 Mode

pub fn mode4(&self) -> MODE4_R

Bits 16:19 - Pin 4 Mode

pub fn mode5(&self) -> MODE5_R

Bits 20:23 - Pin 5 Mode

pub fn mode6(&self) -> MODE6_R

Bits 24:27 - Pin 6 Mode

pub fn mode7(&self) -> MODE7_R

Bits 28:31 - Pin 7 Mode

impl R<u8, MODE8_A>

pub fn variant(&self) -> MODE8_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE9_A>

pub fn variant(&self) -> MODE9_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE10_A>

pub fn variant(&self) -> MODE10_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE11_A>

pub fn variant(&self) -> MODE11_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE12_A>

pub fn variant(&self) -> MODE12_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE13_A>

pub fn variant(&self) -> MODE13_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE14_A>

pub fn variant(&self) -> MODE14_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE15_A>

pub fn variant(&self) -> MODE15_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PG_MODEH>>

pub fn mode8(&self) -> MODE8_R

Bits 0:3 - Pin 8 Mode

pub fn mode9(&self) -> MODE9_R

Bits 4:7 - Pin 9 Mode

pub fn mode10(&self) -> MODE10_R

Bits 8:11 - Pin 10 Mode

pub fn mode11(&self) -> MODE11_R

Bits 12:15 - Pin 11 Mode

pub fn mode12(&self) -> MODE12_R

Bits 16:19 - Pin 12 Mode

pub fn mode13(&self) -> MODE13_R

Bits 20:23 - Pin 13 Mode

pub fn mode14(&self) -> MODE14_R

Bits 24:27 - Pin 14 Mode

pub fn mode15(&self) -> MODE15_R

Bits 28:31 - Pin 15 Mode

impl R<u32, Reg<u32, _PG_DOUT>>

pub fn dout(&self) -> DOUT_R

Bits 0:15 - Data Out

impl R<u32, Reg<u32, _PG_DIN>>

pub fn din(&self) -> DIN_R

Bits 0:15 - Data in

impl R<u32, Reg<u32, _PG_PINLOCKN>>

pub fn pinlockn(&self) -> PINLOCKN_R

Bits 0:15 - Unlocked Pins

impl R<u32, Reg<u32, _PG_OVTDIS>>

pub fn ovtdis(&self) -> OVTDIS_R

Bits 0:15 - Disable Over Voltage Capability

impl R<u32, Reg<u32, _PH_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bit 0 - Drive Strength for Port

pub fn slewrate(&self) -> SLEWRATE_R

Bits 4:6 - Slewrate Limit for Port

pub fn dindis(&self) -> DINDIS_R

Bit 12 - Data in Disable

pub fn drivestrengthalt(&self) -> DRIVESTRENGTHALT_R

Bit 16 - Alternate Drive Strength for Port

pub fn slewratealt(&self) -> SLEWRATEALT_R

Bits 20:22 - Alternate Slewrate Limit for Port

pub fn dindisalt(&self) -> DINDISALT_R

Bit 28 - Alternate Data in Disable

impl R<u8, MODE0_A>

pub fn variant(&self) -> MODE0_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE1_A>

pub fn variant(&self) -> MODE1_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE2_A>

pub fn variant(&self) -> MODE2_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE3_A>

pub fn variant(&self) -> MODE3_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE4_A>

pub fn variant(&self) -> MODE4_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE5_A>

pub fn variant(&self) -> MODE5_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE6_A>

pub fn variant(&self) -> MODE6_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE7_A>

pub fn variant(&self) -> MODE7_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PH_MODEL>>

pub fn mode0(&self) -> MODE0_R

Bits 0:3 - Pin 0 Mode

pub fn mode1(&self) -> MODE1_R

Bits 4:7 - Pin 1 Mode

pub fn mode2(&self) -> MODE2_R

Bits 8:11 - Pin 2 Mode

pub fn mode3(&self) -> MODE3_R

Bits 12:15 - Pin 3 Mode

pub fn mode4(&self) -> MODE4_R

Bits 16:19 - Pin 4 Mode

pub fn mode5(&self) -> MODE5_R

Bits 20:23 - Pin 5 Mode

pub fn mode6(&self) -> MODE6_R

Bits 24:27 - Pin 6 Mode

pub fn mode7(&self) -> MODE7_R

Bits 28:31 - Pin 7 Mode

impl R<u8, MODE8_A>

pub fn variant(&self) -> MODE8_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE9_A>

pub fn variant(&self) -> MODE9_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE10_A>

pub fn variant(&self) -> MODE10_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE11_A>

pub fn variant(&self) -> MODE11_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE12_A>

pub fn variant(&self) -> MODE12_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE13_A>

pub fn variant(&self) -> MODE13_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE14_A>

pub fn variant(&self) -> MODE14_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE15_A>

pub fn variant(&self) -> MODE15_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PH_MODEH>>

pub fn mode8(&self) -> MODE8_R

Bits 0:3 - Pin 8 Mode

pub fn mode9(&self) -> MODE9_R

Bits 4:7 - Pin 9 Mode

pub fn mode10(&self) -> MODE10_R

Bits 8:11 - Pin 10 Mode

pub fn mode11(&self) -> MODE11_R

Bits 12:15 - Pin 11 Mode

pub fn mode12(&self) -> MODE12_R

Bits 16:19 - Pin 12 Mode

pub fn mode13(&self) -> MODE13_R

Bits 20:23 - Pin 13 Mode

pub fn mode14(&self) -> MODE14_R

Bits 24:27 - Pin 14 Mode

pub fn mode15(&self) -> MODE15_R

Bits 28:31 - Pin 15 Mode

impl R<u32, Reg<u32, _PH_DOUT>>

pub fn dout(&self) -> DOUT_R

Bits 0:15 - Data Out

impl R<u32, Reg<u32, _PH_DIN>>

pub fn din(&self) -> DIN_R

Bits 0:15 - Data in

impl R<u32, Reg<u32, _PH_PINLOCKN>>

pub fn pinlockn(&self) -> PINLOCKN_R

Bits 0:15 - Unlocked Pins

impl R<u32, Reg<u32, _PH_OVTDIS>>

pub fn ovtdis(&self) -> OVTDIS_R

Bits 0:15 - Disable Over Voltage Capability

impl R<u32, Reg<u32, _PI_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bit 0 - Drive Strength for Port

pub fn slewrate(&self) -> SLEWRATE_R

Bits 4:6 - Slewrate Limit for Port

pub fn dindis(&self) -> DINDIS_R

Bit 12 - Data in Disable

pub fn drivestrengthalt(&self) -> DRIVESTRENGTHALT_R

Bit 16 - Alternate Drive Strength for Port

pub fn slewratealt(&self) -> SLEWRATEALT_R

Bits 20:22 - Alternate Slewrate Limit for Port

pub fn dindisalt(&self) -> DINDISALT_R

Bit 28 - Alternate Data in Disable

impl R<u8, MODE0_A>

pub fn variant(&self) -> MODE0_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE1_A>

pub fn variant(&self) -> MODE1_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE2_A>

pub fn variant(&self) -> MODE2_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE3_A>

pub fn variant(&self) -> MODE3_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE4_A>

pub fn variant(&self) -> MODE4_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE5_A>

pub fn variant(&self) -> MODE5_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE6_A>

pub fn variant(&self) -> MODE6_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE7_A>

pub fn variant(&self) -> MODE7_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PI_MODEL>>

pub fn mode0(&self) -> MODE0_R

Bits 0:3 - Pin 0 Mode

pub fn mode1(&self) -> MODE1_R

Bits 4:7 - Pin 1 Mode

pub fn mode2(&self) -> MODE2_R

Bits 8:11 - Pin 2 Mode

pub fn mode3(&self) -> MODE3_R

Bits 12:15 - Pin 3 Mode

pub fn mode4(&self) -> MODE4_R

Bits 16:19 - Pin 4 Mode

pub fn mode5(&self) -> MODE5_R

Bits 20:23 - Pin 5 Mode

pub fn mode6(&self) -> MODE6_R

Bits 24:27 - Pin 6 Mode

pub fn mode7(&self) -> MODE7_R

Bits 28:31 - Pin 7 Mode

impl R<u8, MODE8_A>

pub fn variant(&self) -> MODE8_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE9_A>

pub fn variant(&self) -> MODE9_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE10_A>

pub fn variant(&self) -> MODE10_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE11_A>

pub fn variant(&self) -> MODE11_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE12_A>

pub fn variant(&self) -> MODE12_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE13_A>

pub fn variant(&self) -> MODE13_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE14_A>

pub fn variant(&self) -> MODE14_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE15_A>

pub fn variant(&self) -> MODE15_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PI_MODEH>>

pub fn mode8(&self) -> MODE8_R

Bits 0:3 - Pin 8 Mode

pub fn mode9(&self) -> MODE9_R

Bits 4:7 - Pin 9 Mode

pub fn mode10(&self) -> MODE10_R

Bits 8:11 - Pin 10 Mode

pub fn mode11(&self) -> MODE11_R

Bits 12:15 - Pin 11 Mode

pub fn mode12(&self) -> MODE12_R

Bits 16:19 - Pin 12 Mode

pub fn mode13(&self) -> MODE13_R

Bits 20:23 - Pin 13 Mode

pub fn mode14(&self) -> MODE14_R

Bits 24:27 - Pin 14 Mode

pub fn mode15(&self) -> MODE15_R

Bits 28:31 - Pin 15 Mode

impl R<u32, Reg<u32, _PI_DOUT>>

pub fn dout(&self) -> DOUT_R

Bits 0:15 - Data Out

impl R<u32, Reg<u32, _PI_DIN>>

pub fn din(&self) -> DIN_R

Bits 0:15 - Data in

impl R<u32, Reg<u32, _PI_PINLOCKN>>

pub fn pinlockn(&self) -> PINLOCKN_R

Bits 0:15 - Unlocked Pins

impl R<u32, Reg<u32, _PI_OVTDIS>>

pub fn ovtdis(&self) -> OVTDIS_R

Bits 0:15 - Disable Over Voltage Capability

impl R<u32, Reg<u32, _PJ_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bit 0 - Drive Strength for Port

pub fn slewrate(&self) -> SLEWRATE_R

Bits 4:6 - Slewrate Limit for Port

pub fn dindis(&self) -> DINDIS_R

Bit 12 - Data in Disable

pub fn drivestrengthalt(&self) -> DRIVESTRENGTHALT_R

Bit 16 - Alternate Drive Strength for Port

pub fn slewratealt(&self) -> SLEWRATEALT_R

Bits 20:22 - Alternate Slewrate Limit for Port

pub fn dindisalt(&self) -> DINDISALT_R

Bit 28 - Alternate Data in Disable

impl R<u8, MODE0_A>

pub fn variant(&self) -> MODE0_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE1_A>

pub fn variant(&self) -> MODE1_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE2_A>

pub fn variant(&self) -> MODE2_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE3_A>

pub fn variant(&self) -> MODE3_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE4_A>

pub fn variant(&self) -> MODE4_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE5_A>

pub fn variant(&self) -> MODE5_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE6_A>

pub fn variant(&self) -> MODE6_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE7_A>

pub fn variant(&self) -> MODE7_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PJ_MODEL>>

pub fn mode0(&self) -> MODE0_R

Bits 0:3 - Pin 0 Mode

pub fn mode1(&self) -> MODE1_R

Bits 4:7 - Pin 1 Mode

pub fn mode2(&self) -> MODE2_R

Bits 8:11 - Pin 2 Mode

pub fn mode3(&self) -> MODE3_R

Bits 12:15 - Pin 3 Mode

pub fn mode4(&self) -> MODE4_R

Bits 16:19 - Pin 4 Mode

pub fn mode5(&self) -> MODE5_R

Bits 20:23 - Pin 5 Mode

pub fn mode6(&self) -> MODE6_R

Bits 24:27 - Pin 6 Mode

pub fn mode7(&self) -> MODE7_R

Bits 28:31 - Pin 7 Mode

impl R<u8, MODE8_A>

pub fn variant(&self) -> MODE8_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE9_A>

pub fn variant(&self) -> MODE9_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE10_A>

pub fn variant(&self) -> MODE10_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE11_A>

pub fn variant(&self) -> MODE11_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE12_A>

pub fn variant(&self) -> MODE12_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE13_A>

pub fn variant(&self) -> MODE13_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE14_A>

pub fn variant(&self) -> MODE14_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE15_A>

pub fn variant(&self) -> MODE15_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PJ_MODEH>>

pub fn mode8(&self) -> MODE8_R

Bits 0:3 - Pin 8 Mode

pub fn mode9(&self) -> MODE9_R

Bits 4:7 - Pin 9 Mode

pub fn mode10(&self) -> MODE10_R

Bits 8:11 - Pin 10 Mode

pub fn mode11(&self) -> MODE11_R

Bits 12:15 - Pin 11 Mode

pub fn mode12(&self) -> MODE12_R

Bits 16:19 - Pin 12 Mode

pub fn mode13(&self) -> MODE13_R

Bits 20:23 - Pin 13 Mode

pub fn mode14(&self) -> MODE14_R

Bits 24:27 - Pin 14 Mode

pub fn mode15(&self) -> MODE15_R

Bits 28:31 - Pin 15 Mode

impl R<u32, Reg<u32, _PJ_DOUT>>

pub fn dout(&self) -> DOUT_R

Bits 0:15 - Data Out

impl R<u32, Reg<u32, _PJ_DIN>>

pub fn din(&self) -> DIN_R

Bits 0:15 - Data in

impl R<u32, Reg<u32, _PJ_PINLOCKN>>

pub fn pinlockn(&self) -> PINLOCKN_R

Bits 0:15 - Unlocked Pins

impl R<u32, Reg<u32, _PJ_OVTDIS>>

pub fn ovtdis(&self) -> OVTDIS_R

Bits 0:15 - Disable Over Voltage Capability

impl R<u32, Reg<u32, _PK_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bit 0 - Drive Strength for Port

pub fn slewrate(&self) -> SLEWRATE_R

Bits 4:6 - Slewrate Limit for Port

pub fn dindis(&self) -> DINDIS_R

Bit 12 - Data in Disable

pub fn drivestrengthalt(&self) -> DRIVESTRENGTHALT_R

Bit 16 - Alternate Drive Strength for Port

pub fn slewratealt(&self) -> SLEWRATEALT_R

Bits 20:22 - Alternate Slewrate Limit for Port

pub fn dindisalt(&self) -> DINDISALT_R

Bit 28 - Alternate Data in Disable

impl R<u8, MODE0_A>

pub fn variant(&self) -> MODE0_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE1_A>

pub fn variant(&self) -> MODE1_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE2_A>

pub fn variant(&self) -> MODE2_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE3_A>

pub fn variant(&self) -> MODE3_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE4_A>

pub fn variant(&self) -> MODE4_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE5_A>

pub fn variant(&self) -> MODE5_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE6_A>

pub fn variant(&self) -> MODE6_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE7_A>

pub fn variant(&self) -> MODE7_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PK_MODEL>>

pub fn mode0(&self) -> MODE0_R

Bits 0:3 - Pin 0 Mode

pub fn mode1(&self) -> MODE1_R

Bits 4:7 - Pin 1 Mode

pub fn mode2(&self) -> MODE2_R

Bits 8:11 - Pin 2 Mode

pub fn mode3(&self) -> MODE3_R

Bits 12:15 - Pin 3 Mode

pub fn mode4(&self) -> MODE4_R

Bits 16:19 - Pin 4 Mode

pub fn mode5(&self) -> MODE5_R

Bits 20:23 - Pin 5 Mode

pub fn mode6(&self) -> MODE6_R

Bits 24:27 - Pin 6 Mode

pub fn mode7(&self) -> MODE7_R

Bits 28:31 - Pin 7 Mode

impl R<u8, MODE8_A>

pub fn variant(&self) -> MODE8_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE9_A>

pub fn variant(&self) -> MODE9_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE10_A>

pub fn variant(&self) -> MODE10_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE11_A>

pub fn variant(&self) -> MODE11_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE12_A>

pub fn variant(&self) -> MODE12_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE13_A>

pub fn variant(&self) -> MODE13_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE14_A>

pub fn variant(&self) -> MODE14_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE15_A>

pub fn variant(&self) -> MODE15_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PK_MODEH>>

pub fn mode8(&self) -> MODE8_R

Bits 0:3 - Pin 8 Mode

pub fn mode9(&self) -> MODE9_R

Bits 4:7 - Pin 9 Mode

pub fn mode10(&self) -> MODE10_R

Bits 8:11 - Pin 10 Mode

pub fn mode11(&self) -> MODE11_R

Bits 12:15 - Pin 11 Mode

pub fn mode12(&self) -> MODE12_R

Bits 16:19 - Pin 12 Mode

pub fn mode13(&self) -> MODE13_R

Bits 20:23 - Pin 13 Mode

pub fn mode14(&self) -> MODE14_R

Bits 24:27 - Pin 14 Mode

pub fn mode15(&self) -> MODE15_R

Bits 28:31 - Pin 15 Mode

impl R<u32, Reg<u32, _PK_DOUT>>

pub fn dout(&self) -> DOUT_R

Bits 0:15 - Data Out

impl R<u32, Reg<u32, _PK_DIN>>

pub fn din(&self) -> DIN_R

Bits 0:15 - Data in

impl R<u32, Reg<u32, _PK_PINLOCKN>>

pub fn pinlockn(&self) -> PINLOCKN_R

Bits 0:15 - Unlocked Pins

impl R<u32, Reg<u32, _PK_OVTDIS>>

pub fn ovtdis(&self) -> OVTDIS_R

Bits 0:15 - Disable Over Voltage Capability

impl R<u32, Reg<u32, _PL_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bit 0 - Drive Strength for Port

pub fn slewrate(&self) -> SLEWRATE_R

Bits 4:6 - Slewrate Limit for Port

pub fn dindis(&self) -> DINDIS_R

Bit 12 - Data in Disable

pub fn drivestrengthalt(&self) -> DRIVESTRENGTHALT_R

Bit 16 - Alternate Drive Strength for Port

pub fn slewratealt(&self) -> SLEWRATEALT_R

Bits 20:22 - Alternate Slewrate Limit for Port

pub fn dindisalt(&self) -> DINDISALT_R

Bit 28 - Alternate Data in Disable

impl R<u8, MODE0_A>

pub fn variant(&self) -> MODE0_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE1_A>

pub fn variant(&self) -> MODE1_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE2_A>

pub fn variant(&self) -> MODE2_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE3_A>

pub fn variant(&self) -> MODE3_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE4_A>

pub fn variant(&self) -> MODE4_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE5_A>

pub fn variant(&self) -> MODE5_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE6_A>

pub fn variant(&self) -> MODE6_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE7_A>

pub fn variant(&self) -> MODE7_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PL_MODEL>>

pub fn mode0(&self) -> MODE0_R

Bits 0:3 - Pin 0 Mode

pub fn mode1(&self) -> MODE1_R

Bits 4:7 - Pin 1 Mode

pub fn mode2(&self) -> MODE2_R

Bits 8:11 - Pin 2 Mode

pub fn mode3(&self) -> MODE3_R

Bits 12:15 - Pin 3 Mode

pub fn mode4(&self) -> MODE4_R

Bits 16:19 - Pin 4 Mode

pub fn mode5(&self) -> MODE5_R

Bits 20:23 - Pin 5 Mode

pub fn mode6(&self) -> MODE6_R

Bits 24:27 - Pin 6 Mode

pub fn mode7(&self) -> MODE7_R

Bits 28:31 - Pin 7 Mode

impl R<u8, MODE8_A>

pub fn variant(&self) -> MODE8_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE9_A>

pub fn variant(&self) -> MODE9_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE10_A>

pub fn variant(&self) -> MODE10_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE11_A>

pub fn variant(&self) -> MODE11_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE12_A>

pub fn variant(&self) -> MODE12_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE13_A>

pub fn variant(&self) -> MODE13_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE14_A>

pub fn variant(&self) -> MODE14_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u8, MODE15_A>

pub fn variant(&self) -> MODE15_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_input(&self) -> bool

Checks if the value of the field is INPUT

pub fn is_inputpull(&self) -> bool

Checks if the value of the field is INPUTPULL

pub fn is_inputpullfilter(&self) -> bool

Checks if the value of the field is INPUTPULLFILTER

pub fn is_pushpull(&self) -> bool

Checks if the value of the field is PUSHPULL

pub fn is_pushpullalt(&self) -> bool

Checks if the value of the field is PUSHPULLALT

pub fn is_wiredor(&self) -> bool

Checks if the value of the field is WIREDOR

pub fn is_wiredorpulldown(&self) -> bool

Checks if the value of the field is WIREDORPULLDOWN

pub fn is_wiredand(&self) -> bool

Checks if the value of the field is WIREDAND

pub fn is_wiredandfilter(&self) -> bool

Checks if the value of the field is WIREDANDFILTER

pub fn is_wiredandpullup(&self) -> bool

Checks if the value of the field is WIREDANDPULLUP

pub fn is_wiredandpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDPULLUPFILTER

pub fn is_wiredandalt(&self) -> bool

Checks if the value of the field is WIREDANDALT

pub fn is_wiredandaltfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTFILTER

pub fn is_wiredandaltpullup(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUP

pub fn is_wiredandaltpullupfilter(&self) -> bool

Checks if the value of the field is WIREDANDALTPULLUPFILTER

impl R<u32, Reg<u32, _PL_MODEH>>

pub fn mode8(&self) -> MODE8_R

Bits 0:3 - Pin 8 Mode

pub fn mode9(&self) -> MODE9_R

Bits 4:7 - Pin 9 Mode

pub fn mode10(&self) -> MODE10_R

Bits 8:11 - Pin 10 Mode

pub fn mode11(&self) -> MODE11_R

Bits 12:15 - Pin 11 Mode

pub fn mode12(&self) -> MODE12_R

Bits 16:19 - Pin 12 Mode

pub fn mode13(&self) -> MODE13_R

Bits 20:23 - Pin 13 Mode

pub fn mode14(&self) -> MODE14_R

Bits 24:27 - Pin 14 Mode

pub fn mode15(&self) -> MODE15_R

Bits 28:31 - Pin 15 Mode

impl R<u32, Reg<u32, _PL_DOUT>>

pub fn dout(&self) -> DOUT_R

Bits 0:15 - Data Out

impl R<u32, Reg<u32, _PL_DIN>>

pub fn din(&self) -> DIN_R

Bits 0:15 - Data in

impl R<u32, Reg<u32, _PL_PINLOCKN>>

pub fn pinlockn(&self) -> PINLOCKN_R

Bits 0:15 - Unlocked Pins

impl R<u32, Reg<u32, _PL_OVTDIS>>

pub fn ovtdis(&self) -> OVTDIS_R

Bits 0:15 - Disable Over Voltage Capability

impl R<u8, EXTIPSEL0_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL0_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u8, EXTIPSEL1_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL1_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u8, EXTIPSEL2_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL2_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u8, EXTIPSEL3_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL3_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u8, EXTIPSEL4_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL4_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u8, EXTIPSEL5_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL5_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u8, EXTIPSEL6_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL6_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u8, EXTIPSEL7_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL7_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u32, Reg<u32, _EXTIPSELL>>

pub fn extipsel0(&self) -> EXTIPSEL0_R

Bits 0:3 - External Interrupt 0 Port Select

pub fn extipsel1(&self) -> EXTIPSEL1_R

Bits 4:7 - External Interrupt 1 Port Select

pub fn extipsel2(&self) -> EXTIPSEL2_R

Bits 8:11 - External Interrupt 2 Port Select

pub fn extipsel3(&self) -> EXTIPSEL3_R

Bits 12:15 - External Interrupt 3 Port Select

pub fn extipsel4(&self) -> EXTIPSEL4_R

Bits 16:19 - External Interrupt 4 Port Select

pub fn extipsel5(&self) -> EXTIPSEL5_R

Bits 20:23 - External Interrupt 5 Port Select

pub fn extipsel6(&self) -> EXTIPSEL6_R

Bits 24:27 - External Interrupt 6 Port Select

pub fn extipsel7(&self) -> EXTIPSEL7_R

Bits 28:31 - External Interrupt 7 Port Select

impl R<u8, EXTIPSEL8_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL8_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u8, EXTIPSEL9_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL9_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u8, EXTIPSEL10_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL10_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u8, EXTIPSEL11_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL11_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u8, EXTIPSEL12_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL12_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u8, EXTIPSEL13_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL13_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u8, EXTIPSEL14_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL14_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u8, EXTIPSEL15_A>

pub fn variant(&self) -> Variant<u8, EXTIPSEL15_A>

Get enumerated values variant

pub fn is_porta(&self) -> bool

Checks if the value of the field is PORTA

pub fn is_portb(&self) -> bool

Checks if the value of the field is PORTB

pub fn is_portc(&self) -> bool

Checks if the value of the field is PORTC

pub fn is_portd(&self) -> bool

Checks if the value of the field is PORTD

pub fn is_porte(&self) -> bool

Checks if the value of the field is PORTE

pub fn is_portf(&self) -> bool

Checks if the value of the field is PORTF

pub fn is_portg(&self) -> bool

Checks if the value of the field is PORTG

pub fn is_porth(&self) -> bool

Checks if the value of the field is PORTH

pub fn is_porti(&self) -> bool

Checks if the value of the field is PORTI

impl R<u32, Reg<u32, _EXTIPSELH>>

pub fn extipsel8(&self) -> EXTIPSEL8_R

Bits 0:3 - External Interrupt 8 Port Select

pub fn extipsel9(&self) -> EXTIPSEL9_R

Bits 4:7 - External Interrupt 9 Port Select

pub fn extipsel10(&self) -> EXTIPSEL10_R

Bits 8:11 - External Interrupt 10 Port Select

pub fn extipsel11(&self) -> EXTIPSEL11_R

Bits 12:15 - External Interrupt 11 Port Select

pub fn extipsel12(&self) -> EXTIPSEL12_R

Bits 16:19 - External Interrupt 12 Port Select

pub fn extipsel13(&self) -> EXTIPSEL13_R

Bits 20:23 - External Interrupt 13 Port Select

pub fn extipsel14(&self) -> EXTIPSEL14_R

Bits 24:27 - External Interrupt 14 Port Select

pub fn extipsel15(&self) -> EXTIPSEL15_R

Bits 28:31 - External Interrupt 15 Port Select

impl R<u8, EXTIPINSEL0_A>

pub fn variant(&self) -> EXTIPINSEL0_A

Get enumerated values variant

pub fn is_pin0(&self) -> bool

Checks if the value of the field is PIN0

pub fn is_pin1(&self) -> bool

Checks if the value of the field is PIN1

pub fn is_pin2(&self) -> bool

Checks if the value of the field is PIN2

pub fn is_pin3(&self) -> bool

Checks if the value of the field is PIN3

impl R<u8, EXTIPINSEL1_A>

pub fn variant(&self) -> EXTIPINSEL1_A

Get enumerated values variant

pub fn is_pin0(&self) -> bool

Checks if the value of the field is PIN0

pub fn is_pin1(&self) -> bool

Checks if the value of the field is PIN1

pub fn is_pin2(&self) -> bool

Checks if the value of the field is PIN2

pub fn is_pin3(&self) -> bool

Checks if the value of the field is PIN3

impl R<u8, EXTIPINSEL2_A>

pub fn variant(&self) -> EXTIPINSEL2_A

Get enumerated values variant

pub fn is_pin0(&self) -> bool

Checks if the value of the field is PIN0

pub fn is_pin1(&self) -> bool

Checks if the value of the field is PIN1

pub fn is_pin2(&self) -> bool

Checks if the value of the field is PIN2

pub fn is_pin3(&self) -> bool

Checks if the value of the field is PIN3

impl R<u8, EXTIPINSEL3_A>

pub fn variant(&self) -> EXTIPINSEL3_A

Get enumerated values variant

pub fn is_pin0(&self) -> bool

Checks if the value of the field is PIN0

pub fn is_pin1(&self) -> bool

Checks if the value of the field is PIN1

pub fn is_pin2(&self) -> bool

Checks if the value of the field is PIN2

pub fn is_pin3(&self) -> bool

Checks if the value of the field is PIN3

impl R<u8, EXTIPINSEL4_A>

pub fn variant(&self) -> EXTIPINSEL4_A

Get enumerated values variant

pub fn is_pin4(&self) -> bool

Checks if the value of the field is PIN4

pub fn is_pin5(&self) -> bool

Checks if the value of the field is PIN5

pub fn is_pin6(&self) -> bool

Checks if the value of the field is PIN6

pub fn is_pin7(&self) -> bool

Checks if the value of the field is PIN7

impl R<u8, EXTIPINSEL5_A>

pub fn variant(&self) -> EXTIPINSEL5_A

Get enumerated values variant

pub fn is_pin4(&self) -> bool

Checks if the value of the field is PIN4

pub fn is_pin5(&self) -> bool

Checks if the value of the field is PIN5

pub fn is_pin6(&self) -> bool

Checks if the value of the field is PIN6

pub fn is_pin7(&self) -> bool

Checks if the value of the field is PIN7

impl R<u8, EXTIPINSEL6_A>

pub fn variant(&self) -> EXTIPINSEL6_A

Get enumerated values variant

pub fn is_pin4(&self) -> bool

Checks if the value of the field is PIN4

pub fn is_pin5(&self) -> bool

Checks if the value of the field is PIN5

pub fn is_pin6(&self) -> bool

Checks if the value of the field is PIN6

pub fn is_pin7(&self) -> bool

Checks if the value of the field is PIN7

impl R<u8, EXTIPINSEL7_A>

pub fn variant(&self) -> EXTIPINSEL7_A

Get enumerated values variant

pub fn is_pin4(&self) -> bool

Checks if the value of the field is PIN4

pub fn is_pin5(&self) -> bool

Checks if the value of the field is PIN5

pub fn is_pin6(&self) -> bool

Checks if the value of the field is PIN6

pub fn is_pin7(&self) -> bool

Checks if the value of the field is PIN7

impl R<u32, Reg<u32, _EXTIPINSELL>>

pub fn extipinsel0(&self) -> EXTIPINSEL0_R

Bits 0:1 - External Interrupt 0 Pin Select

pub fn extipinsel1(&self) -> EXTIPINSEL1_R

Bits 4:5 - External Interrupt 1 Pin Select

pub fn extipinsel2(&self) -> EXTIPINSEL2_R

Bits 8:9 - External Interrupt 2 Pin Select

pub fn extipinsel3(&self) -> EXTIPINSEL3_R

Bits 12:13 - External Interrupt 3 Pin Select

pub fn extipinsel4(&self) -> EXTIPINSEL4_R

Bits 16:17 - External Interrupt 4 Pin Select

pub fn extipinsel5(&self) -> EXTIPINSEL5_R

Bits 20:21 - External Interrupt 5 Pin Select

pub fn extipinsel6(&self) -> EXTIPINSEL6_R

Bits 24:25 - External Interrupt 6 Pin Select

pub fn extipinsel7(&self) -> EXTIPINSEL7_R

Bits 28:29 - External Interrupt 7 Pin Select

impl R<u8, EXTIPINSEL8_A>

pub fn variant(&self) -> EXTIPINSEL8_A

Get enumerated values variant

pub fn is_pin8(&self) -> bool

Checks if the value of the field is PIN8

pub fn is_pin9(&self) -> bool

Checks if the value of the field is PIN9

pub fn is_pin10(&self) -> bool

Checks if the value of the field is PIN10

pub fn is_pin11(&self) -> bool

Checks if the value of the field is PIN11

impl R<u8, EXTIPINSEL9_A>

pub fn variant(&self) -> EXTIPINSEL9_A

Get enumerated values variant

pub fn is_pin8(&self) -> bool

Checks if the value of the field is PIN8

pub fn is_pin9(&self) -> bool

Checks if the value of the field is PIN9

pub fn is_pin10(&self) -> bool

Checks if the value of the field is PIN10

pub fn is_pin11(&self) -> bool

Checks if the value of the field is PIN11

impl R<u8, EXTIPINSEL10_A>

pub fn variant(&self) -> EXTIPINSEL10_A

Get enumerated values variant

pub fn is_pin8(&self) -> bool

Checks if the value of the field is PIN8

pub fn is_pin9(&self) -> bool

Checks if the value of the field is PIN9

pub fn is_pin10(&self) -> bool

Checks if the value of the field is PIN10

pub fn is_pin11(&self) -> bool

Checks if the value of the field is PIN11

impl R<u8, EXTIPINSEL11_A>

pub fn variant(&self) -> EXTIPINSEL11_A

Get enumerated values variant

pub fn is_pin8(&self) -> bool

Checks if the value of the field is PIN8

pub fn is_pin9(&self) -> bool

Checks if the value of the field is PIN9

pub fn is_pin10(&self) -> bool

Checks if the value of the field is PIN10

pub fn is_pin11(&self) -> bool

Checks if the value of the field is PIN11

impl R<u8, EXTIPINSEL12_A>

pub fn variant(&self) -> EXTIPINSEL12_A

Get enumerated values variant

pub fn is_pin12(&self) -> bool

Checks if the value of the field is PIN12

pub fn is_pin13(&self) -> bool

Checks if the value of the field is PIN13

pub fn is_pin14(&self) -> bool

Checks if the value of the field is PIN14

pub fn is_pin15(&self) -> bool

Checks if the value of the field is PIN15

impl R<u8, EXTIPINSEL13_A>

pub fn variant(&self) -> EXTIPINSEL13_A

Get enumerated values variant

pub fn is_pin12(&self) -> bool

Checks if the value of the field is PIN12

pub fn is_pin13(&self) -> bool

Checks if the value of the field is PIN13

pub fn is_pin14(&self) -> bool

Checks if the value of the field is PIN14

pub fn is_pin15(&self) -> bool

Checks if the value of the field is PIN15

impl R<u8, EXTIPINSEL14_A>

pub fn variant(&self) -> EXTIPINSEL14_A

Get enumerated values variant

pub fn is_pin12(&self) -> bool

Checks if the value of the field is PIN12

pub fn is_pin13(&self) -> bool

Checks if the value of the field is PIN13

pub fn is_pin14(&self) -> bool

Checks if the value of the field is PIN14

pub fn is_pin15(&self) -> bool

Checks if the value of the field is PIN15

impl R<u8, EXTIPINSEL15_A>

pub fn variant(&self) -> EXTIPINSEL15_A

Get enumerated values variant

pub fn is_pin12(&self) -> bool

Checks if the value of the field is PIN12

pub fn is_pin13(&self) -> bool

Checks if the value of the field is PIN13

pub fn is_pin14(&self) -> bool

Checks if the value of the field is PIN14

pub fn is_pin15(&self) -> bool

Checks if the value of the field is PIN15

impl R<u32, Reg<u32, _EXTIPINSELH>>

pub fn extipinsel8(&self) -> EXTIPINSEL8_R

Bits 0:1 - External Interrupt 8 Pin Select

pub fn extipinsel9(&self) -> EXTIPINSEL9_R

Bits 4:5 - External Interrupt 9 Pin Select

pub fn extipinsel10(&self) -> EXTIPINSEL10_R

Bits 8:9 - External Interrupt 10 Pin Select

pub fn extipinsel11(&self) -> EXTIPINSEL11_R

Bits 12:13 - External Interrupt 11 Pin Select

pub fn extipinsel12(&self) -> EXTIPINSEL12_R

Bits 16:17 - External Interrupt 12 Pin Select

pub fn extipinsel13(&self) -> EXTIPINSEL13_R

Bits 20:21 - External Interrupt 13 Pin Select

pub fn extipinsel14(&self) -> EXTIPINSEL14_R

Bits 24:25 - External Interrupt 14 Pin Select

pub fn extipinsel15(&self) -> EXTIPINSEL15_R

Bits 28:29 - External Interrupt 15 Pin Select

impl R<u32, Reg<u32, _EXTIRISE>>

pub fn extirise(&self) -> EXTIRISE_R

Bits 0:15 - External Interrupt N Rising Edge Trigger Enable

impl R<u32, Reg<u32, _EXTIFALL>>

pub fn extifall(&self) -> EXTIFALL_R

Bits 0:15 - External Interrupt N Falling Edge Trigger Enable

impl R<u32, Reg<u32, _EXTILEVEL>>

pub fn em4wu0(&self) -> EM4WU0_R

Bit 16 - EM4 Wake Up Level for EM4WU0 Pin

pub fn em4wu1(&self) -> EM4WU1_R

Bit 17 - EM4 Wake Up Level for EM4WU1 Pin

pub fn em4wu2(&self) -> EM4WU2_R

Bit 18 - EM4 Wake Up Level for EM4WU2 Pin

pub fn em4wu3(&self) -> EM4WU3_R

Bit 19 - EM4 Wake Up Level for EM4WU3 Pin

pub fn em4wu4(&self) -> EM4WU4_R

Bit 20 - EM4 Wake Up Level for EM4WU4 Pin

pub fn em4wu5(&self) -> EM4WU5_R

Bit 21 - EM4 Wake Up Level for EM4WU5 Pin

pub fn em4wu6(&self) -> EM4WU6_R

Bit 22 - EM4 Wake Up Level for EM4WU6 Pin

pub fn em4wu7(&self) -> EM4WU7_R

Bit 23 - EM4 Wake Up Level for EM4WU7 Pin

pub fn em4wu8(&self) -> EM4WU8_R

Bit 24 - EM4 Wake Up Level for EM4WU8 Pin

pub fn em4wu9(&self) -> EM4WU9_R

Bit 25 - EM4 Wake Up Level for EM4WU9 Pin

impl R<u32, Reg<u32, _IF>>

pub fn ext(&self) -> EXT_R

Bits 0:15 - External Pin Interrupt Flag

pub fn em4wu(&self) -> EM4WU_R

Bits 16:31 - EM4 Wake Up Pin Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn ext(&self) -> EXT_R

Bits 0:15 - EXT Interrupt Enable

pub fn em4wu(&self) -> EM4WU_R

Bits 16:31 - EM4WU Interrupt Enable

impl R<u32, Reg<u32, _EM4WUEN>>

pub fn em4wuen(&self) -> EM4WUEN_R

Bits 16:31 - EM4 Wake Up Enable

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn swclktckpen(&self) -> SWCLKTCKPEN_R

Bit 0 - Serial Wire Clock and JTAG Test Clock Pin Enable

pub fn swdiotmspen(&self) -> SWDIOTMSPEN_R

Bit 1 - Serial Wire Data and JTAG Test Mode Select Pin Enable

pub fn tdopen(&self) -> TDOPEN_R

Bit 2 - JTAG Test Debug Output Pin Enable

pub fn tdipen(&self) -> TDIPEN_R

Bit 3 - JTAG Test Debug Input Pin Enable

pub fn swvpen(&self) -> SWVPEN_R

Bit 4 - Serial Wire Viewer Output Pin Enable

pub fn etmtclkpen(&self) -> ETMTCLKPEN_R

Bit 16 - ETM Trace Clock Pin Enable

pub fn etmtd0pen(&self) -> ETMTD0PEN_R

Bit 17 - ETM Trace Data Pin Enable

pub fn etmtd1pen(&self) -> ETMTD1PEN_R

Bit 18 - ETM Trace Data Pin Enable

pub fn etmtd2pen(&self) -> ETMTD2PEN_R

Bit 19 - ETM Trace Data Pin Enable

pub fn etmtd3pen(&self) -> ETMTD3PEN_R

Bit 20 - ETM Trace Data Pin Enable

impl R<u8, SWVLOC_A>

pub fn variant(&self) -> Variant<u8, SWVLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

impl R<u8, ETMLOC_A>

pub fn variant(&self) -> Variant<u8, ETMLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn swvloc(&self) -> SWVLOC_R

Bits 0:5 - I/O Location

pub fn etmloc(&self) -> ETMLOC_R

Bits 6:11 - I/O Location

impl R<u32, Reg<u32, _INSENSE>>

pub fn int(&self) -> INT_R

Bit 0 - Interrupt Sense Enable

pub fn em4wu(&self) -> EM4WU_R

Bit 1 - EM4WU Interrupt Sense Enable

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - Configuration Lock Key

impl R<u32, Reg<u32, _SWLEVEL>>

pub fn ch0level(&self) -> CH0LEVEL_R

Bit 0 - Channel 0 Software Level

pub fn ch1level(&self) -> CH1LEVEL_R

Bit 1 - Channel 1 Software Level

pub fn ch2level(&self) -> CH2LEVEL_R

Bit 2 - Channel 2 Software Level

pub fn ch3level(&self) -> CH3LEVEL_R

Bit 3 - Channel 3 Software Level

pub fn ch4level(&self) -> CH4LEVEL_R

Bit 4 - Channel 4 Software Level

pub fn ch5level(&self) -> CH5LEVEL_R

Bit 5 - Channel 5 Software Level

pub fn ch6level(&self) -> CH6LEVEL_R

Bit 6 - Channel 6 Software Level

pub fn ch7level(&self) -> CH7LEVEL_R

Bit 7 - Channel 7 Software Level

pub fn ch8level(&self) -> CH8LEVEL_R

Bit 8 - Channel 8 Software Level

pub fn ch9level(&self) -> CH9LEVEL_R

Bit 9 - Channel 9 Software Level

pub fn ch10level(&self) -> CH10LEVEL_R

Bit 10 - Channel 10 Software Level

pub fn ch11level(&self) -> CH11LEVEL_R

Bit 11 - Channel 11 Software Level

pub fn ch12level(&self) -> CH12LEVEL_R

Bit 12 - Channel 12 Software Level

pub fn ch13level(&self) -> CH13LEVEL_R

Bit 13 - Channel 13 Software Level

pub fn ch14level(&self) -> CH14LEVEL_R

Bit 14 - Channel 14 Software Level

pub fn ch15level(&self) -> CH15LEVEL_R

Bit 15 - Channel 15 Software Level

pub fn ch16level(&self) -> CH16LEVEL_R

Bit 16 - Channel 16 Software Level

pub fn ch17level(&self) -> CH17LEVEL_R

Bit 17 - Channel 17 Software Level

pub fn ch18level(&self) -> CH18LEVEL_R

Bit 18 - Channel 18 Software Level

pub fn ch19level(&self) -> CH19LEVEL_R

Bit 19 - Channel 19 Software Level

pub fn ch20level(&self) -> CH20LEVEL_R

Bit 20 - Channel 20 Software Level

pub fn ch21level(&self) -> CH21LEVEL_R

Bit 21 - Channel 21 Software Level

pub fn ch22level(&self) -> CH22LEVEL_R

Bit 22 - Channel 22 Software Level

pub fn ch23level(&self) -> CH23LEVEL_R

Bit 23 - Channel 23 Software Level

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn ch0pen(&self) -> CH0PEN_R

Bit 0 - CH0 Pin Enable

pub fn ch1pen(&self) -> CH1PEN_R

Bit 1 - CH1 Pin Enable

pub fn ch2pen(&self) -> CH2PEN_R

Bit 2 - CH2 Pin Enable

pub fn ch3pen(&self) -> CH3PEN_R

Bit 3 - CH3 Pin Enable

pub fn ch4pen(&self) -> CH4PEN_R

Bit 4 - CH4 Pin Enable

pub fn ch5pen(&self) -> CH5PEN_R

Bit 5 - CH5 Pin Enable

pub fn ch6pen(&self) -> CH6PEN_R

Bit 6 - CH6 Pin Enable

pub fn ch7pen(&self) -> CH7PEN_R

Bit 7 - CH7 Pin Enable

pub fn ch8pen(&self) -> CH8PEN_R

Bit 8 - CH8 Pin Enable

pub fn ch9pen(&self) -> CH9PEN_R

Bit 9 - CH9 Pin Enable

pub fn ch10pen(&self) -> CH10PEN_R

Bit 10 - CH10 Pin Enable

pub fn ch11pen(&self) -> CH11PEN_R

Bit 11 - CH11 Pin Enable

pub fn ch12pen(&self) -> CH12PEN_R

Bit 12 - CH12 Pin Enable

pub fn ch13pen(&self) -> CH13PEN_R

Bit 13 - CH13 Pin Enable

pub fn ch14pen(&self) -> CH14PEN_R

Bit 14 - CH14 Pin Enable

pub fn ch15pen(&self) -> CH15PEN_R

Bit 15 - CH15 Pin Enable

pub fn ch16pen(&self) -> CH16PEN_R

Bit 16 - CH16 Pin Enable

pub fn ch17pen(&self) -> CH17PEN_R

Bit 17 - CH17 Pin Enable

pub fn ch18pen(&self) -> CH18PEN_R

Bit 18 - CH18 Pin Enable

pub fn ch19pen(&self) -> CH19PEN_R

Bit 19 - CH19 Pin Enable

pub fn ch20pen(&self) -> CH20PEN_R

Bit 20 - CH20 Pin Enable

pub fn ch21pen(&self) -> CH21PEN_R

Bit 21 - CH21 Pin Enable

pub fn ch22pen(&self) -> CH22PEN_R

Bit 22 - CH22 Pin Enable

pub fn ch23pen(&self) -> CH23PEN_R

Bit 23 - CH23 Pin Enable

impl R<u8, CH0LOC_A>

pub fn variant(&self) -> Variant<u8, CH0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

impl R<u8, CH1LOC_A>

pub fn variant(&self) -> Variant<u8, CH1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

impl R<u8, CH2LOC_A>

pub fn variant(&self) -> Variant<u8, CH2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

impl R<u8, CH3LOC_A>

pub fn variant(&self) -> Variant<u8, CH3LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn ch0loc(&self) -> CH0LOC_R

Bits 0:5 - I/O Location

pub fn ch1loc(&self) -> CH1LOC_R

Bits 8:13 - I/O Location

pub fn ch2loc(&self) -> CH2LOC_R

Bits 16:21 - I/O Location

pub fn ch3loc(&self) -> CH3LOC_R

Bits 24:29 - I/O Location

impl R<u8, CH4LOC_A>

pub fn variant(&self) -> Variant<u8, CH4LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, CH5LOC_A>

pub fn variant(&self) -> Variant<u8, CH5LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, CH6LOC_A>

pub fn variant(&self) -> Variant<u8, CH6LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, CH7LOC_A>

pub fn variant(&self) -> Variant<u8, CH7LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u32, Reg<u32, _ROUTELOC1>>

pub fn ch4loc(&self) -> CH4LOC_R

Bits 0:5 - I/O Location

pub fn ch5loc(&self) -> CH5LOC_R

Bits 8:13 - I/O Location

pub fn ch6loc(&self) -> CH6LOC_R

Bits 16:21 - I/O Location

pub fn ch7loc(&self) -> CH7LOC_R

Bits 24:29 - I/O Location

impl R<u8, CH8LOC_A>

pub fn variant(&self) -> Variant<u8, CH8LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, CH9LOC_A>

pub fn variant(&self) -> Variant<u8, CH9LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, CH10LOC_A>

pub fn variant(&self) -> Variant<u8, CH10LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, CH11LOC_A>

pub fn variant(&self) -> Variant<u8, CH11LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u32, Reg<u32, _ROUTELOC2>>

pub fn ch8loc(&self) -> CH8LOC_R

Bits 0:5 - I/O Location

pub fn ch9loc(&self) -> CH9LOC_R

Bits 8:13 - I/O Location

pub fn ch10loc(&self) -> CH10LOC_R

Bits 16:21 - I/O Location

pub fn ch11loc(&self) -> CH11LOC_R

Bits 24:29 - I/O Location

impl R<u8, CH12LOC_A>

pub fn variant(&self) -> Variant<u8, CH12LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, CH13LOC_A>

pub fn variant(&self) -> Variant<u8, CH13LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, CH14LOC_A>

pub fn variant(&self) -> Variant<u8, CH14LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, CH15LOC_A>

pub fn variant(&self) -> Variant<u8, CH15LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u32, Reg<u32, _ROUTELOC3>>

pub fn ch12loc(&self) -> CH12LOC_R

Bits 0:5 - I/O Location

pub fn ch13loc(&self) -> CH13LOC_R

Bits 8:13 - I/O Location

pub fn ch14loc(&self) -> CH14LOC_R

Bits 16:21 - I/O Location

pub fn ch15loc(&self) -> CH15LOC_R

Bits 24:29 - I/O Location

impl R<u8, CH16LOC_A>

pub fn variant(&self) -> Variant<u8, CH16LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, CH17LOC_A>

pub fn variant(&self) -> Variant<u8, CH17LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, CH18LOC_A>

pub fn variant(&self) -> Variant<u8, CH18LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, CH19LOC_A>

pub fn variant(&self) -> Variant<u8, CH19LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u32, Reg<u32, _ROUTELOC4>>

pub fn ch16loc(&self) -> CH16LOC_R

Bits 0:5 - I/O Location

pub fn ch17loc(&self) -> CH17LOC_R

Bits 8:13 - I/O Location

pub fn ch18loc(&self) -> CH18LOC_R

Bits 16:21 - I/O Location

pub fn ch19loc(&self) -> CH19LOC_R

Bits 24:29 - I/O Location

impl R<u8, CH20LOC_A>

pub fn variant(&self) -> Variant<u8, CH20LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, CH21LOC_A>

pub fn variant(&self) -> Variant<u8, CH21LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, CH22LOC_A>

pub fn variant(&self) -> Variant<u8, CH22LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u8, CH23LOC_A>

pub fn variant(&self) -> Variant<u8, CH23LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u32, Reg<u32, _ROUTELOC5>>

pub fn ch20loc(&self) -> CH20LOC_R

Bits 0:5 - I/O Location

pub fn ch21loc(&self) -> CH21LOC_R

Bits 8:13 - I/O Location

pub fn ch22loc(&self) -> CH22LOC_R

Bits 16:21 - I/O Location

pub fn ch23loc(&self) -> CH23LOC_R

Bits 24:29 - I/O Location

impl R<u8, SEVONPRSSEL_A>

pub fn variant(&self) -> Variant<u8, SEVONPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _CTRL>>

pub fn sevonprs(&self) -> SEVONPRS_R

Bit 0 - Set Event on PRS

pub fn sevonprssel(&self) -> SEVONPRSSEL_R

Bits 1:5 - SEVONPRS PRS Channel Select

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _DMAREQ0>>

pub fn prssel(&self) -> PRSSEL_R

Bits 6:10 - DMA Request 0 PRS Channel Select

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _DMAREQ1>>

pub fn prssel(&self) -> PRSSEL_R

Bits 6:10 - DMA Request 1 PRS Channel Select

impl R<u32, Reg<u32, _PEEK>>

pub fn ch0val(&self) -> CH0VAL_R

Bit 0 - Channel 0 Current Value

pub fn ch1val(&self) -> CH1VAL_R

Bit 1 - Channel 1 Current Value

pub fn ch2val(&self) -> CH2VAL_R

Bit 2 - Channel 2 Current Value

pub fn ch3val(&self) -> CH3VAL_R

Bit 3 - Channel 3 Current Value

pub fn ch4val(&self) -> CH4VAL_R

Bit 4 - Channel 4 Current Value

pub fn ch5val(&self) -> CH5VAL_R

Bit 5 - Channel 5 Current Value

pub fn ch6val(&self) -> CH6VAL_R

Bit 6 - Channel 6 Current Value

pub fn ch7val(&self) -> CH7VAL_R

Bit 7 - Channel 7 Current Value

pub fn ch8val(&self) -> CH8VAL_R

Bit 8 - Channel 8 Current Value

pub fn ch9val(&self) -> CH9VAL_R

Bit 9 - Channel 9 Current Value

pub fn ch10val(&self) -> CH10VAL_R

Bit 10 - Channel 10 Current Value

pub fn ch11val(&self) -> CH11VAL_R

Bit 11 - Channel 11 Current Value

pub fn ch12val(&self) -> CH12VAL_R

Bit 12 - Channel 12 Current Value

pub fn ch13val(&self) -> CH13VAL_R

Bit 13 - Channel 13 Current Value

pub fn ch14val(&self) -> CH14VAL_R

Bit 14 - Channel 14 Current Value

pub fn ch15val(&self) -> CH15VAL_R

Bit 15 - Channel 15 Current Value

pub fn ch16val(&self) -> CH16VAL_R

Bit 16 - Channel 16 Current Value

pub fn ch17val(&self) -> CH17VAL_R

Bit 17 - Channel 17 Current Value

pub fn ch18val(&self) -> CH18VAL_R

Bit 18 - Channel 18 Current Value

pub fn ch19val(&self) -> CH19VAL_R

Bit 19 - Channel 19 Current Value

pub fn ch20val(&self) -> CH20VAL_R

Bit 20 - Channel 20 Current Value

pub fn ch21val(&self) -> CH21VAL_R

Bit 21 - Channel 21 Current Value

pub fn ch22val(&self) -> CH22VAL_R

Bit 22 - Channel 22 Current Value

pub fn ch23val(&self) -> CH23VAL_R

Bit 23 - Channel 23 Current Value

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH0_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH1_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH2_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH3_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH4_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH5_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH6_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH7_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH8_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH9_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH10_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH11_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH12_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH13_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH14_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH15_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH16_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH17_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH18_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH19_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH20_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH21_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH22_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prsl(&self) -> bool

Checks if the value of the field is PRSL

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_prsh(&self) -> bool

Checks if the value of the field is PRSH

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_gpiol(&self) -> bool

Checks if the value of the field is GPIOL

pub fn is_gpioh(&self) -> bool

Checks if the value of the field is GPIOH

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_lesensel(&self) -> bool

Checks if the value of the field is LESENSEL

pub fn is_lesenseh(&self) -> bool

Checks if the value of the field is LESENSEH

pub fn is_lesensed(&self) -> bool

Checks if the value of the field is LESENSED

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_cm4(&self) -> bool

Checks if the value of the field is CM4

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

impl R<u8, EDSEL_A>

pub fn variant(&self) -> EDSEL_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_posedge(&self) -> bool

Checks if the value of the field is POSEDGE

pub fn is_negedge(&self) -> bool

Checks if the value of the field is NEGEDGE

pub fn is_bothedges(&self) -> bool

Checks if the value of the field is BOTHEDGES

impl R<u32, Reg<u32, _CH23_CTRL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:2 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 8:14 - Source Select

pub fn edsel(&self) -> EDSEL_R

Bits 20:21 - Edge Detect Select

pub fn stretch(&self) -> STRETCH_R

Bit 25 - Stretch Channel Output

pub fn inv(&self) -> INV_R

Bit 26 - Invert Channel

pub fn orprev(&self) -> ORPREV_R

Bit 27 - Or Previous

pub fn andnext(&self) -> ANDNEXT_R

Bit 28 - And Next

pub fn async_(&self) -> ASYNC_R

Bit 30 - Asynchronous Reflex

impl R<u32, Reg<u32, _CTRL>>

pub fn syncprsseten(&self) -> SYNCPRSSETEN_R

Bits 0:7 - Synchronization PRS Set Enable

pub fn syncprsclren(&self) -> SYNCPRSCLREN_R

Bits 8:15 - Synchronization PRS Clear Enable

pub fn numfixed(&self) -> NUMFIXED_R

Bits 24:28 - Number of Fixed Priority Channels

impl R<u32, Reg<u32, _STATUS>>

pub fn anybusy(&self) -> ANYBUSY_R

Bit 0 - Any DMA Channel Busy

pub fn anyreq(&self) -> ANYREQ_R

Bit 1 - Any DMA Channel Request Pending

pub fn chgrant(&self) -> CHGRANT_R

Bits 3:7 - Granted Channel Number

pub fn cherror(&self) -> CHERROR_R

Bits 8:12 - Errant Channel Number

pub fn fifolevel(&self) -> FIFOLEVEL_R

Bits 16:20 - FIFO Level

pub fn chnum(&self) -> CHNUM_R

Bits 24:28 - Number of Channels

impl R<u32, Reg<u32, _SYNC>>

pub fn synctrig(&self) -> SYNCTRIG_R

Bits 0:7 - Synchronization Trigger

impl R<u32, Reg<u32, _CHEN>>

pub fn chen(&self) -> CHEN_R

Bits 0:23 - Channel Enables

impl R<u32, Reg<u32, _CHBUSY>>

pub fn busy(&self) -> BUSY_R

Bits 0:23 - Channels Busy

impl R<u32, Reg<u32, _CHDONE>>

pub fn chdone(&self) -> CHDONE_R

Bits 0:23 - DMA Channel Linking or Done

impl R<u32, Reg<u32, _DBGHALT>>

pub fn dbghalt(&self) -> DBGHALT_R

Bits 0:23 - DMA Debug Halt

impl R<u32, Reg<u32, _REQDIS>>

pub fn reqdis(&self) -> REQDIS_R

Bits 0:23 - DMA Request Disables

impl R<u32, Reg<u32, _REQPEND>>

pub fn reqpend(&self) -> REQPEND_R

Bits 0:23 - DMA Requests Pending

impl R<u32, Reg<u32, _IF>>

pub fn done(&self) -> DONE_R

Bits 0:23 - DMA Structure Operation Done Interrupt Flag

pub fn error(&self) -> ERROR_R

Bit 31 - Transfer Error Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn done(&self) -> DONE_R

Bits 0:23 - DONE Interrupt Enable

pub fn error(&self) -> ERROR_R

Bit 31 - ERROR Interrupt Enable

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH0_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH0_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH0_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH0_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH0_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH0_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH0_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH1_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH1_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH1_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH1_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH1_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH1_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH1_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH2_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH2_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH2_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH2_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH2_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH2_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH2_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH3_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH3_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH3_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH3_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH3_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH3_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH3_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH4_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH4_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH4_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH4_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH4_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH4_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH4_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH5_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH5_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH5_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH5_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH5_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH5_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH5_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH6_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH6_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH6_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH6_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH6_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH6_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH6_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH7_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH7_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH7_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH7_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH7_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH7_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH7_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH8_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH8_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH8_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH8_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH8_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH8_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH8_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH9_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH9_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH9_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH9_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH9_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH9_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH9_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH10_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH10_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH10_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH10_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH10_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH10_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH10_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH11_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH11_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH11_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH11_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH11_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH11_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH11_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH12_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH12_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH12_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH12_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH12_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH12_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH12_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH13_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH13_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH13_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH13_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH13_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH13_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH13_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH14_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH14_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH14_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH14_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH14_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH14_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH14_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH15_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH15_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH15_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH15_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH15_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH15_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH15_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH16_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH16_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH16_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH16_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH16_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH16_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH16_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH17_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH17_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH17_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH17_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH17_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH17_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH17_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH18_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH18_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH18_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH18_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH18_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH18_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH18_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH19_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH19_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH19_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH19_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH19_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH19_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH19_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH20_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH20_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH20_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH20_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH20_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH20_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH20_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH21_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH21_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH21_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH21_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH21_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH21_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH21_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH22_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH22_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH22_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH22_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH22_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH22_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH22_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u8, SOURCESEL_A>

pub fn variant(&self) -> Variant<u8, SOURCESEL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u32, Reg<u32, _CH23_REQSEL>>

pub fn sigsel(&self) -> SIGSEL_R

Bits 0:3 - Signal Select

pub fn sourcesel(&self) -> SOURCESEL_R

Bits 16:21 - Source Select

impl R<u8, ARBSLOTS_A>

pub fn variant(&self) -> ARBSLOTS_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

impl R<u32, Reg<u32, _CH23_CFG>>

pub fn arbslots(&self) -> ARBSLOTS_R

Bits 16:17 - Arbitration Slot Number Select

pub fn srcincsign(&self) -> SRCINCSIGN_R

Bit 20 - Source Address Increment Sign

pub fn dstincsign(&self) -> DSTINCSIGN_R

Bit 21 - Destination Address Increment Sign

impl R<u32, Reg<u32, _CH23_LOOP>>

pub fn loopcnt(&self) -> LOOPCNT_R

Bits 0:7 - Linked Structure Sequence Loop Counter

impl R<u8, STRUCTTYPE_A>

pub fn variant(&self) -> Variant<u8, STRUCTTYPE_A>

Get enumerated values variant

pub fn is_transfer(&self) -> bool

Checks if the value of the field is TRANSFER

pub fn is_synchronize(&self) -> bool

Checks if the value of the field is SYNCHRONIZE

pub fn is_write(&self) -> bool

Checks if the value of the field is WRITE

impl R<u8, BLOCKSIZE_A>

pub fn variant(&self) -> Variant<u8, BLOCKSIZE_A>

Get enumerated values variant

pub fn is_unit1(&self) -> bool

Checks if the value of the field is UNIT1

pub fn is_unit2(&self) -> bool

Checks if the value of the field is UNIT2

pub fn is_unit3(&self) -> bool

Checks if the value of the field is UNIT3

pub fn is_unit4(&self) -> bool

Checks if the value of the field is UNIT4

pub fn is_unit6(&self) -> bool

Checks if the value of the field is UNIT6

pub fn is_unit8(&self) -> bool

Checks if the value of the field is UNIT8

pub fn is_unit16(&self) -> bool

Checks if the value of the field is UNIT16

pub fn is_unit32(&self) -> bool

Checks if the value of the field is UNIT32

pub fn is_unit64(&self) -> bool

Checks if the value of the field is UNIT64

pub fn is_unit128(&self) -> bool

Checks if the value of the field is UNIT128

pub fn is_unit256(&self) -> bool

Checks if the value of the field is UNIT256

pub fn is_unit512(&self) -> bool

Checks if the value of the field is UNIT512

pub fn is_unit1024(&self) -> bool

Checks if the value of the field is UNIT1024

pub fn is_all(&self) -> bool

Checks if the value of the field is ALL

impl R<u8, SRCINC_A>

pub fn variant(&self) -> SRCINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, SIZE_A>

pub fn variant(&self) -> Variant<u8, SIZE_A>

Get enumerated values variant

pub fn is_byte(&self) -> bool

Checks if the value of the field is BYTE

pub fn is_halfword(&self) -> bool

Checks if the value of the field is HALFWORD

pub fn is_word(&self) -> bool

Checks if the value of the field is WORD

impl R<u8, DSTINC_A>

pub fn variant(&self) -> DSTINC_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u32, Reg<u32, _CH23_CTRL>>

pub fn structtype(&self) -> STRUCTTYPE_R

Bits 0:1 - DMA Structure Type

pub fn xfercnt(&self) -> XFERCNT_R

Bits 4:14 - DMA Unit Data Transfer Count

pub fn byteswap(&self) -> BYTESWAP_R

Bit 15 - Endian Byte Swap

pub fn blocksize(&self) -> BLOCKSIZE_R

Bits 16:19 - Block Transfer Size

pub fn doneifsen(&self) -> DONEIFSEN_R

Bit 20 - DMA Operation Done Interrupt Flag Set Enable

pub fn reqmode(&self) -> REQMODE_R

Bit 21 - DMA Request Transfer Mode Select

pub fn decloopcnt(&self) -> DECLOOPCNT_R

Bit 22 - Decrement Loop Count

pub fn ignoresreq(&self) -> IGNORESREQ_R

Bit 23 - Ignore Sreq

pub fn srcinc(&self) -> SRCINC_R

Bits 24:25 - Source Address Increment Size

pub fn size(&self) -> SIZE_R

Bits 26:27 - Unit Data Transfer Size

pub fn dstinc(&self) -> DSTINC_R

Bits 28:29 - Destination Address Increment Size

pub fn srcmode(&self) -> SRCMODE_R

Bit 30 - Source Addressing Mode

pub fn dstmode(&self) -> DSTMODE_R

Bit 31 - Destination Addressing Mode

impl R<u32, Reg<u32, _CH23_SRC>>

pub fn srcaddr(&self) -> SRCADDR_R

Bits 0:31 - Source Data Address

impl R<u32, Reg<u32, _CH23_DST>>

pub fn dstaddr(&self) -> DSTADDR_R

Bits 0:31 - Destination Data Address

impl R<u32, Reg<u32, _CH23_LINK>>

pub fn linkmode(&self) -> LINKMODE_R

Bit 0 - Link Structure Addressing Mode

pub fn link(&self) -> LINK_R

Bit 1 - Link Next Structure

pub fn linkaddr(&self) -> LINKADDR_R

Bits 2:31 - Link Structure Address

impl R<u32, Reg<u32, _IF>>

pub fn fpioc(&self) -> FPIOC_R

Bit 0 - FPU invalid operation

pub fn fpdzc(&self) -> FPDZC_R

Bit 1 - FPU divide-by-zero exception

pub fn fpufc(&self) -> FPUFC_R

Bit 2 - FPU underflow exception

pub fn fpofc(&self) -> FPOFC_R

Bit 3 - FPU overflow exception

pub fn fpidc(&self) -> FPIDC_R

Bit 4 - FPU input denormal exception

pub fn fpixc(&self) -> FPIXC_R

Bit 5 - FPU inexact exception

impl R<u32, Reg<u32, _IEN>>

pub fn fpioc(&self) -> FPIOC_R

Bit 0 - FPIOC Interrupt Enable

pub fn fpdzc(&self) -> FPDZC_R

Bit 1 - FPDZC Interrupt Enable

pub fn fpufc(&self) -> FPUFC_R

Bit 2 - FPUFC Interrupt Enable

pub fn fpofc(&self) -> FPOFC_R

Bit 3 - FPOFC Interrupt Enable

pub fn fpidc(&self) -> FPIDC_R

Bit 4 - FPIDC Interrupt Enable

pub fn fpixc(&self) -> FPIXC_R

Bit 5 - FPIXC Interrupt Enable

impl R<u32, Reg<u32, _CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - CRC Functionality Enable

pub fn polysel(&self) -> POLYSEL_R

Bit 4 - Polynomial Select

pub fn bytemode(&self) -> BYTEMODE_R

Bit 8 - Byte Mode Enable

pub fn bitreverse(&self) -> BITREVERSE_R

Bit 9 - Byte-level Bit Reverse Enable

pub fn bytereverse(&self) -> BYTEREVERSE_R

Bit 10 - Byte Reverse Mode

pub fn autoinit(&self) -> AUTOINIT_R

Bit 13 - Auto Init Enable

impl R<u32, Reg<u32, _INIT>>

pub fn init(&self) -> INIT_R

Bits 0:31 - CRC Initialization Value

impl R<u32, Reg<u32, _POLY>>

pub fn poly(&self) -> POLY_R

Bits 0:15 - CRC Polynomial Value

impl R<u32, Reg<u32, _INPUTDATA>>

pub fn inputdata(&self) -> INPUTDATA_R

Bits 0:31 - Input Data for 32-bit

impl R<u32, Reg<u32, _INPUTDATAHWORD>>

pub fn inputdatahword(&self) -> INPUTDATAHWORD_R

Bits 0:15 - Input Data for 16-bit

impl R<u32, Reg<u32, _INPUTDATABYTE>>

pub fn inputdatabyte(&self) -> INPUTDATABYTE_R

Bits 0:7 - Input Data for 8-bit

impl R<u32, Reg<u32, _DATA>>

pub fn data(&self) -> DATA_R

Bits 0:31 - CRC Data Register

impl R<u32, Reg<u32, _DATAREV>>

pub fn datarev(&self) -> DATAREV_R

Bits 0:31 - Data Reverse Value

impl R<u32, Reg<u32, _DATABYTEREV>>

pub fn databyterev(&self) -> DATABYTEREV_R

Bits 0:31 - Data Byte Reverse Value

impl R<u32, Reg<u32, _CTRL>>

pub fn init(&self) -> INIT_R

Bit 0 - Initialize

pub fn ie(&self) -> IE_R

Bit 1 - Module Interrupt Enable

pub fn sie(&self) -> SIE_R

Bit 2 - Status Change Interrupt Enable

pub fn eie(&self) -> EIE_R

Bit 3 - Error Interrupt Enable

pub fn dar(&self) -> DAR_R

Bit 5 - Disable Automatic Retransmission

pub fn cce(&self) -> CCE_R

Bit 6 - Configuration Change Enable

pub fn test(&self) -> TEST_R

Bit 7 - Test Mode Enable Write

impl R<u8, LEC_A>

pub fn variant(&self) -> LEC_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_stuff(&self) -> bool

Checks if the value of the field is STUFF

pub fn is_form(&self) -> bool

Checks if the value of the field is FORM

pub fn is_ack(&self) -> bool

Checks if the value of the field is ACK

pub fn is_bit1(&self) -> bool

Checks if the value of the field is BIT1

pub fn is_bit0(&self) -> bool

Checks if the value of the field is BIT0

pub fn is_crc(&self) -> bool

Checks if the value of the field is CRC

pub fn is_unused(&self) -> bool

Checks if the value of the field is UNUSED

impl R<u32, Reg<u32, _STATUS>>

pub fn lec(&self) -> LEC_R

Bits 0:2 - Last Error Code

pub fn txok(&self) -> TXOK_R

Bit 3 - Transmitted a Message Successfully

pub fn rxok(&self) -> RXOK_R

Bit 4 - Received a Message Successfully

pub fn epass(&self) -> EPASS_R

Bit 5 - Error Passive

pub fn ewarn(&self) -> EWARN_R

Bit 6 - Warning Status

pub fn boff(&self) -> BOFF_R

Bit 7 - Bus Off Status

impl R<u32, Reg<u32, _ERRCNT>>

pub fn tec(&self) -> TEC_R

Bits 0:7 - Transmit Error Counter

pub fn rec(&self) -> REC_R

Bits 8:14 - Receive Error Counter

pub fn recerrp(&self) -> RECERRP_R

Bit 15 - Receive Error Passive

impl R<u32, Reg<u32, _BITTIMING>>

pub fn brp(&self) -> BRP_R

Bits 0:5 - Baud Rate Prescaler

pub fn sjw(&self) -> SJW_R

Bits 6:7 - Synchronization Jump Width

pub fn tseg1(&self) -> TSEG1_R

Bits 8:11 - Time Segment Before the Sample Point

pub fn tseg2(&self) -> TSEG2_R

Bits 12:14 - Time Segment After the Sample Point

impl R<u32, Reg<u32, _INTID>>

pub fn intid(&self) -> INTID_R

Bits 0:5 - Interrupt Identifier

pub fn intstat(&self) -> INTSTAT_R

Bit 15 - Status Interupt

impl R<u8, TX_A>

pub fn variant(&self) -> TX_A

Get enumerated values variant

pub fn is_core(&self) -> bool

Checks if the value of the field is CORE

pub fn is_sampt(&self) -> bool

Checks if the value of the field is SAMPT

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

impl R<u32, Reg<u32, _TEST>>

pub fn basic(&self) -> BASIC_R

Bit 2 - Basic Mode

pub fn silent(&self) -> SILENT_R

Bit 3 - Silent Mode

pub fn lback(&self) -> LBACK_R

Bit 4 - Loopback Mode

pub fn tx(&self) -> TX_R

Bits 5:6 - Control of CAN_TX Pin

pub fn rx(&self) -> RX_R

Bit 7 - Monitors the Actual Value of CAN_RX Pin

impl R<u32, Reg<u32, _BRPE>>

pub fn brpe(&self) -> BRPE_R

Bits 0:3 - Baud Rate Prescaler Extension

impl R<u32, TXRQSTOUT_A>

pub fn variant(&self) -> Variant<u32, TXRQSTOUT_A>

Get enumerated values variant

pub fn is_false_(&self) -> bool

Checks if the value of the field is FALSE

pub fn is_true_(&self) -> bool

Checks if the value of the field is TRUE

impl R<u32, Reg<u32, _TRANSREQ>>

pub fn txrqstout(&self) -> TXRQSTOUT_R

Bits 0:31 - Transmission Request Bits (Of All Message Objects)

impl R<u32, Reg<u32, _MESSAGEDATA>>

pub fn valid(&self) -> VALID_R

Bits 0:31 - DATAVALID Bits (of All Message Objects)

impl R<u32, Reg<u32, _MESSAGESTATE>>

pub fn valid(&self) -> VALID_R

Bits 0:31 - Message Valid Bits (of All Message Objects)

impl R<u32, Reg<u32, _CONFIG>>

pub fn dbghalt(&self) -> DBGHALT_R

Bit 15 - Debug Halt

impl R<u32, Reg<u32, _IF0IF>>

pub fn message(&self) -> MESSAGE_R

Bits 0:31 - Message Object Interrupt Flag

impl R<u32, Reg<u32, _IF0IEN>>

pub fn message(&self) -> MESSAGE_R

Bits 0:31 - MESSAGE Interrupt Enable

impl R<u32, Reg<u32, _IF1IF>>

pub fn status(&self) -> STATUS_R

Bit 0 - Status Interrupt Flag

impl R<u32, Reg<u32, _IF1IEN>>

pub fn status(&self) -> STATUS_R

Bit 0 - STATUS Interrupt Enable

impl R<u8, RXLOC_A>

pub fn variant(&self) -> Variant<u8, RXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, TXLOC_A>

pub fn variant(&self) -> Variant<u8, TXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTE>>

pub fn txpen(&self) -> TXPEN_R

Bit 0 - TX Pin Enable

pub fn rxloc(&self) -> RXLOC_R

Bits 2:7 - RX Pin Location

pub fn txloc(&self) -> TXLOC_R

Bits 8:13 - TX Pin Location

impl R<u32, Reg<u32, _MIR0_CMDMASK>>

pub fn datab(&self) -> DATAB_R

Bit 0 - CC Channel Mode

pub fn dataa(&self) -> DATAA_R

Bit 1 - Access Data Bytes 0-3

pub fn txrqstnewdat(&self) -> TXRQSTNEWDAT_R

Bit 2 - Transmission Request Bit/ New Data Bit

pub fn clrintpnd(&self) -> CLRINTPND_R

Bit 3 - Clear Interrupt Pending Bit

pub fn control(&self) -> CONTROL_R

Bit 4 - Access Control Bits

pub fn arbacc(&self) -> ARBACC_R

Bit 5 - Access Arbitration Bits

pub fn maskacc(&self) -> MASKACC_R

Bit 6 - Access Mask Bits

pub fn wrrd(&self) -> WRRD_R

Bit 7 - Write/Read RAM

impl R<u32, Reg<u32, _MIR0_MASK>>

pub fn mask(&self) -> MASK_R

Bits 0:28 - Identifier Mask

pub fn mdir(&self) -> MDIR_R

Bit 30 - Mask Message Direction

pub fn mxtd(&self) -> MXTD_R

Bit 31 - Mask Extended Identifier

impl R<u32, Reg<u32, _MIR0_ARB>>

pub fn id(&self) -> ID_R

Bits 0:28 - Message Identifier

pub fn dir(&self) -> DIR_R

Bit 29 - Message Direction

pub fn xtd(&self) -> XTD_R

Bit 30 - Extended Identifier

pub fn msgval(&self) -> MSGVAL_R

Bit 31 - Message Valid

impl R<u32, Reg<u32, _MIR0_CTRL>>

pub fn dlc(&self) -> DLC_R

Bits 0:3 - Data Length Code

pub fn eob(&self) -> EOB_R

Bit 7 - End of Buffer

pub fn txrqst(&self) -> TXRQST_R

Bit 8 - Transmit Request

pub fn rmten(&self) -> RMTEN_R

Bit 9 - Remote Enable

pub fn rxie(&self) -> RXIE_R

Bit 10 - Receive Interrupt Enable

pub fn txie(&self) -> TXIE_R

Bit 11 - Transmit Interrupt Enable

pub fn umask(&self) -> UMASK_R

Bit 12 - Use Acceptance Mask

pub fn intpnd(&self) -> INTPND_R

Bit 13 - Interrupt Pending

pub fn messageof(&self) -> MESSAGEOF_R

Bit 14 - Message Lost (only Valid for Message Objects With Direction = Receive)

pub fn datavalid(&self) -> DATAVALID_R

Bit 15 - New Data

impl R<u32, Reg<u32, _MIR0_DATAL>>

pub fn data0(&self) -> DATA0_R

Bits 0:7 - First Byte of CAN Data Frame

pub fn data1(&self) -> DATA1_R

Bits 8:15 - Second Byte of CAN Data Frame

pub fn data2(&self) -> DATA2_R

Bits 16:23 - Third Byte of CAN Data Frame

pub fn data3(&self) -> DATA3_R

Bits 24:31 - Fourth Byte of CAN Data Frame

impl R<u32, Reg<u32, _MIR0_DATAH>>

pub fn data4(&self) -> DATA4_R

Bits 0:7 - Fifth Byte of CAN Data Frame

pub fn data5(&self) -> DATA5_R

Bits 8:15 - Sixth Byte of CAN Data Frame

pub fn data6(&self) -> DATA6_R

Bits 16:23 - Seventh Byte of CAN Data Frame

pub fn data7(&self) -> DATA7_R

Bits 24:31 - Eight Byte of CAN Data Frame

impl R<u32, Reg<u32, _MIR0_CMDREQ>>

pub fn msgnum(&self) -> MSGNUM_R

Bits 0:5 - Message Number

pub fn busy(&self) -> BUSY_R

Bit 15 - Busy Flag

impl R<u32, Reg<u32, _MIR1_CMDMASK>>

pub fn datab(&self) -> DATAB_R

Bit 0 - CC Channel Mode

pub fn dataa(&self) -> DATAA_R

Bit 1 - Access Data Bytes 0-3

pub fn txrqstnewdat(&self) -> TXRQSTNEWDAT_R

Bit 2 - Transmission Request Bit/ New Data Bit

pub fn clrintpnd(&self) -> CLRINTPND_R

Bit 3 - Clear Interrupt Pending Bit

pub fn control(&self) -> CONTROL_R

Bit 4 - Access Control Bits

pub fn arbacc(&self) -> ARBACC_R

Bit 5 - Access Arbitration Bits

pub fn maskacc(&self) -> MASKACC_R

Bit 6 - Access Mask Bits

pub fn wrrd(&self) -> WRRD_R

Bit 7 - Write/Read RAM

impl R<u32, Reg<u32, _MIR1_MASK>>

pub fn mask(&self) -> MASK_R

Bits 0:28 - Identifier Mask

pub fn mdir(&self) -> MDIR_R

Bit 30 - Mask Message Direction

pub fn mxtd(&self) -> MXTD_R

Bit 31 - Mask Extended Identifier

impl R<u32, Reg<u32, _MIR1_ARB>>

pub fn id(&self) -> ID_R

Bits 0:28 - Message Identifier

pub fn dir(&self) -> DIR_R

Bit 29 - Message Direction

pub fn xtd(&self) -> XTD_R

Bit 30 - Extended Identifier

pub fn msgval(&self) -> MSGVAL_R

Bit 31 - Message Valid

impl R<u32, Reg<u32, _MIR1_CTRL>>

pub fn dlc(&self) -> DLC_R

Bits 0:3 - Data Length Code

pub fn eob(&self) -> EOB_R

Bit 7 - End of Buffer

pub fn txrqst(&self) -> TXRQST_R

Bit 8 - Transmit Request

pub fn rmten(&self) -> RMTEN_R

Bit 9 - Remote Enable

pub fn rxie(&self) -> RXIE_R

Bit 10 - Receive Interrupt Enable

pub fn txie(&self) -> TXIE_R

Bit 11 - Transmit Interrupt Enable

pub fn umask(&self) -> UMASK_R

Bit 12 - Use Acceptance Mask

pub fn intpnd(&self) -> INTPND_R

Bit 13 - Interrupt Pending

pub fn messageof(&self) -> MESSAGEOF_R

Bit 14 - Message Lost (only Valid for Message Objects With Direction = Receive)

pub fn datavalid(&self) -> DATAVALID_R

Bit 15 - New Data

impl R<u32, Reg<u32, _MIR1_DATAL>>

pub fn data0(&self) -> DATA0_R

Bits 0:7 - First Byte of CAN Data Frame

pub fn data1(&self) -> DATA1_R

Bits 8:15 - Second Byte of CAN Data Frame

pub fn data2(&self) -> DATA2_R

Bits 16:23 - Third Byte of CAN Data Frame

pub fn data3(&self) -> DATA3_R

Bits 24:31 - Fourth Byte of CAN Data Frame

impl R<u32, Reg<u32, _MIR1_DATAH>>

pub fn data4(&self) -> DATA4_R

Bits 0:7 - Fifth Byte of CAN Data Frame

pub fn data5(&self) -> DATA5_R

Bits 8:15 - Sixth Byte of CAN Data Frame

pub fn data6(&self) -> DATA6_R

Bits 16:23 - Seventh Byte of CAN Data Frame

pub fn data7(&self) -> DATA7_R

Bits 24:31 - Eight Byte of CAN Data Frame

impl R<u32, Reg<u32, _MIR1_CMDREQ>>

pub fn msgnum(&self) -> MSGNUM_R

Bits 0:5 - Message Number

pub fn busy(&self) -> BUSY_R

Bit 15 - Busy Flag

impl R<u32, Reg<u32, _CTRL>>

pub fn init(&self) -> INIT_R

Bit 0 - Initialize

pub fn ie(&self) -> IE_R

Bit 1 - Module Interrupt Enable

pub fn sie(&self) -> SIE_R

Bit 2 - Status Change Interrupt Enable

pub fn eie(&self) -> EIE_R

Bit 3 - Error Interrupt Enable

pub fn dar(&self) -> DAR_R

Bit 5 - Disable Automatic Retransmission

pub fn cce(&self) -> CCE_R

Bit 6 - Configuration Change Enable

pub fn test(&self) -> TEST_R

Bit 7 - Test Mode Enable Write

impl R<u8, LEC_A>

pub fn variant(&self) -> LEC_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_stuff(&self) -> bool

Checks if the value of the field is STUFF

pub fn is_form(&self) -> bool

Checks if the value of the field is FORM

pub fn is_ack(&self) -> bool

Checks if the value of the field is ACK

pub fn is_bit1(&self) -> bool

Checks if the value of the field is BIT1

pub fn is_bit0(&self) -> bool

Checks if the value of the field is BIT0

pub fn is_crc(&self) -> bool

Checks if the value of the field is CRC

pub fn is_unused(&self) -> bool

Checks if the value of the field is UNUSED

impl R<u32, Reg<u32, _STATUS>>

pub fn lec(&self) -> LEC_R

Bits 0:2 - Last Error Code

pub fn txok(&self) -> TXOK_R

Bit 3 - Transmitted a Message Successfully

pub fn rxok(&self) -> RXOK_R

Bit 4 - Received a Message Successfully

pub fn epass(&self) -> EPASS_R

Bit 5 - Error Passive

pub fn ewarn(&self) -> EWARN_R

Bit 6 - Warning Status

pub fn boff(&self) -> BOFF_R

Bit 7 - Bus Off Status

impl R<u32, Reg<u32, _ERRCNT>>

pub fn tec(&self) -> TEC_R

Bits 0:7 - Transmit Error Counter

pub fn rec(&self) -> REC_R

Bits 8:14 - Receive Error Counter

pub fn recerrp(&self) -> RECERRP_R

Bit 15 - Receive Error Passive

impl R<u32, Reg<u32, _BITTIMING>>

pub fn brp(&self) -> BRP_R

Bits 0:5 - Baud Rate Prescaler

pub fn sjw(&self) -> SJW_R

Bits 6:7 - Synchronization Jump Width

pub fn tseg1(&self) -> TSEG1_R

Bits 8:11 - Time Segment Before the Sample Point

pub fn tseg2(&self) -> TSEG2_R

Bits 12:14 - Time Segment After the Sample Point

impl R<u32, Reg<u32, _INTID>>

pub fn intid(&self) -> INTID_R

Bits 0:5 - Interrupt Identifier

pub fn intstat(&self) -> INTSTAT_R

Bit 15 - Status Interupt

impl R<u8, TX_A>

pub fn variant(&self) -> TX_A

Get enumerated values variant

pub fn is_core(&self) -> bool

Checks if the value of the field is CORE

pub fn is_sampt(&self) -> bool

Checks if the value of the field is SAMPT

pub fn is_low(&self) -> bool

Checks if the value of the field is LOW

pub fn is_high(&self) -> bool

Checks if the value of the field is HIGH

impl R<u32, Reg<u32, _TEST>>

pub fn basic(&self) -> BASIC_R

Bit 2 - Basic Mode

pub fn silent(&self) -> SILENT_R

Bit 3 - Silent Mode

pub fn lback(&self) -> LBACK_R

Bit 4 - Loopback Mode

pub fn tx(&self) -> TX_R

Bits 5:6 - Control of CAN_TX Pin

pub fn rx(&self) -> RX_R

Bit 7 - Monitors the Actual Value of CAN_RX Pin

impl R<u32, Reg<u32, _BRPE>>

pub fn brpe(&self) -> BRPE_R

Bits 0:3 - Baud Rate Prescaler Extension

impl R<u32, TXRQSTOUT_A>

pub fn variant(&self) -> Variant<u32, TXRQSTOUT_A>

Get enumerated values variant

pub fn is_false_(&self) -> bool

Checks if the value of the field is FALSE

pub fn is_true_(&self) -> bool

Checks if the value of the field is TRUE

impl R<u32, Reg<u32, _TRANSREQ>>

pub fn txrqstout(&self) -> TXRQSTOUT_R

Bits 0:31 - Transmission Request Bits (Of All Message Objects)

impl R<u32, Reg<u32, _MESSAGEDATA>>

pub fn valid(&self) -> VALID_R

Bits 0:31 - DATAVALID Bits (of All Message Objects)

impl R<u32, Reg<u32, _MESSAGESTATE>>

pub fn valid(&self) -> VALID_R

Bits 0:31 - Message Valid Bits (of All Message Objects)

impl R<u32, Reg<u32, _CONFIG>>

pub fn dbghalt(&self) -> DBGHALT_R

Bit 15 - Debug Halt

impl R<u32, Reg<u32, _IF0IF>>

pub fn message(&self) -> MESSAGE_R

Bits 0:31 - Message Object Interrupt Flag

impl R<u32, Reg<u32, _IF0IEN>>

pub fn message(&self) -> MESSAGE_R

Bits 0:31 - MESSAGE Interrupt Enable

impl R<u32, Reg<u32, _IF1IF>>

pub fn status(&self) -> STATUS_R

Bit 0 - Status Interrupt Flag

impl R<u32, Reg<u32, _IF1IEN>>

pub fn status(&self) -> STATUS_R

Bit 0 - STATUS Interrupt Enable

impl R<u8, RXLOC_A>

pub fn variant(&self) -> Variant<u8, RXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, TXLOC_A>

pub fn variant(&self) -> Variant<u8, TXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTE>>

pub fn txpen(&self) -> TXPEN_R

Bit 0 - TX Pin Enable

pub fn rxloc(&self) -> RXLOC_R

Bits 2:7 - RX Pin Location

pub fn txloc(&self) -> TXLOC_R

Bits 8:13 - TX Pin Location

impl R<u32, Reg<u32, _MIR0_CMDMASK>>

pub fn datab(&self) -> DATAB_R

Bit 0 - CC Channel Mode

pub fn dataa(&self) -> DATAA_R

Bit 1 - Access Data Bytes 0-3

pub fn txrqstnewdat(&self) -> TXRQSTNEWDAT_R

Bit 2 - Transmission Request Bit/ New Data Bit

pub fn clrintpnd(&self) -> CLRINTPND_R

Bit 3 - Clear Interrupt Pending Bit

pub fn control(&self) -> CONTROL_R

Bit 4 - Access Control Bits

pub fn arbacc(&self) -> ARBACC_R

Bit 5 - Access Arbitration Bits

pub fn maskacc(&self) -> MASKACC_R

Bit 6 - Access Mask Bits

pub fn wrrd(&self) -> WRRD_R

Bit 7 - Write/Read RAM

impl R<u32, Reg<u32, _MIR0_MASK>>

pub fn mask(&self) -> MASK_R

Bits 0:28 - Identifier Mask

pub fn mdir(&self) -> MDIR_R

Bit 30 - Mask Message Direction

pub fn mxtd(&self) -> MXTD_R

Bit 31 - Mask Extended Identifier

impl R<u32, Reg<u32, _MIR0_ARB>>

pub fn id(&self) -> ID_R

Bits 0:28 - Message Identifier

pub fn dir(&self) -> DIR_R

Bit 29 - Message Direction

pub fn xtd(&self) -> XTD_R

Bit 30 - Extended Identifier

pub fn msgval(&self) -> MSGVAL_R

Bit 31 - Message Valid

impl R<u32, Reg<u32, _MIR0_CTRL>>

pub fn dlc(&self) -> DLC_R

Bits 0:3 - Data Length Code

pub fn eob(&self) -> EOB_R

Bit 7 - End of Buffer

pub fn txrqst(&self) -> TXRQST_R

Bit 8 - Transmit Request

pub fn rmten(&self) -> RMTEN_R

Bit 9 - Remote Enable

pub fn rxie(&self) -> RXIE_R

Bit 10 - Receive Interrupt Enable

pub fn txie(&self) -> TXIE_R

Bit 11 - Transmit Interrupt Enable

pub fn umask(&self) -> UMASK_R

Bit 12 - Use Acceptance Mask

pub fn intpnd(&self) -> INTPND_R

Bit 13 - Interrupt Pending

pub fn messageof(&self) -> MESSAGEOF_R

Bit 14 - Message Lost (only Valid for Message Objects With Direction = Receive)

pub fn datavalid(&self) -> DATAVALID_R

Bit 15 - New Data

impl R<u32, Reg<u32, _MIR0_DATAL>>

pub fn data0(&self) -> DATA0_R

Bits 0:7 - First Byte of CAN Data Frame

pub fn data1(&self) -> DATA1_R

Bits 8:15 - Second Byte of CAN Data Frame

pub fn data2(&self) -> DATA2_R

Bits 16:23 - Third Byte of CAN Data Frame

pub fn data3(&self) -> DATA3_R

Bits 24:31 - Fourth Byte of CAN Data Frame

impl R<u32, Reg<u32, _MIR0_DATAH>>

pub fn data4(&self) -> DATA4_R

Bits 0:7 - Fifth Byte of CAN Data Frame

pub fn data5(&self) -> DATA5_R

Bits 8:15 - Sixth Byte of CAN Data Frame

pub fn data6(&self) -> DATA6_R

Bits 16:23 - Seventh Byte of CAN Data Frame

pub fn data7(&self) -> DATA7_R

Bits 24:31 - Eight Byte of CAN Data Frame

impl R<u32, Reg<u32, _MIR0_CMDREQ>>

pub fn msgnum(&self) -> MSGNUM_R

Bits 0:5 - Message Number

pub fn busy(&self) -> BUSY_R

Bit 15 - Busy Flag

impl R<u32, Reg<u32, _MIR1_CMDMASK>>

pub fn datab(&self) -> DATAB_R

Bit 0 - CC Channel Mode

pub fn dataa(&self) -> DATAA_R

Bit 1 - Access Data Bytes 0-3

pub fn txrqstnewdat(&self) -> TXRQSTNEWDAT_R

Bit 2 - Transmission Request Bit/ New Data Bit

pub fn clrintpnd(&self) -> CLRINTPND_R

Bit 3 - Clear Interrupt Pending Bit

pub fn control(&self) -> CONTROL_R

Bit 4 - Access Control Bits

pub fn arbacc(&self) -> ARBACC_R

Bit 5 - Access Arbitration Bits

pub fn maskacc(&self) -> MASKACC_R

Bit 6 - Access Mask Bits

pub fn wrrd(&self) -> WRRD_R

Bit 7 - Write/Read RAM

impl R<u32, Reg<u32, _MIR1_MASK>>

pub fn mask(&self) -> MASK_R

Bits 0:28 - Identifier Mask

pub fn mdir(&self) -> MDIR_R

Bit 30 - Mask Message Direction

pub fn mxtd(&self) -> MXTD_R

Bit 31 - Mask Extended Identifier

impl R<u32, Reg<u32, _MIR1_ARB>>

pub fn id(&self) -> ID_R

Bits 0:28 - Message Identifier

pub fn dir(&self) -> DIR_R

Bit 29 - Message Direction

pub fn xtd(&self) -> XTD_R

Bit 30 - Extended Identifier

pub fn msgval(&self) -> MSGVAL_R

Bit 31 - Message Valid

impl R<u32, Reg<u32, _MIR1_CTRL>>

pub fn dlc(&self) -> DLC_R

Bits 0:3 - Data Length Code

pub fn eob(&self) -> EOB_R

Bit 7 - End of Buffer

pub fn txrqst(&self) -> TXRQST_R

Bit 8 - Transmit Request

pub fn rmten(&self) -> RMTEN_R

Bit 9 - Remote Enable

pub fn rxie(&self) -> RXIE_R

Bit 10 - Receive Interrupt Enable

pub fn txie(&self) -> TXIE_R

Bit 11 - Transmit Interrupt Enable

pub fn umask(&self) -> UMASK_R

Bit 12 - Use Acceptance Mask

pub fn intpnd(&self) -> INTPND_R

Bit 13 - Interrupt Pending

pub fn messageof(&self) -> MESSAGEOF_R

Bit 14 - Message Lost (only Valid for Message Objects With Direction = Receive)

pub fn datavalid(&self) -> DATAVALID_R

Bit 15 - New Data

impl R<u32, Reg<u32, _MIR1_DATAL>>

pub fn data0(&self) -> DATA0_R

Bits 0:7 - First Byte of CAN Data Frame

pub fn data1(&self) -> DATA1_R

Bits 8:15 - Second Byte of CAN Data Frame

pub fn data2(&self) -> DATA2_R

Bits 16:23 - Third Byte of CAN Data Frame

pub fn data3(&self) -> DATA3_R

Bits 24:31 - Fourth Byte of CAN Data Frame

impl R<u32, Reg<u32, _MIR1_DATAH>>

pub fn data4(&self) -> DATA4_R

Bits 0:7 - Fifth Byte of CAN Data Frame

pub fn data5(&self) -> DATA5_R

Bits 8:15 - Sixth Byte of CAN Data Frame

pub fn data6(&self) -> DATA6_R

Bits 16:23 - Seventh Byte of CAN Data Frame

pub fn data7(&self) -> DATA7_R

Bits 24:31 - Eight Byte of CAN Data Frame

impl R<u32, Reg<u32, _MIR1_CMDREQ>>

pub fn msgnum(&self) -> MSGNUM_R

Bits 0:5 - Message Number

pub fn busy(&self) -> BUSY_R

Bit 15 - Busy Flag

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_updown(&self) -> bool

Checks if the value of the field is UPDOWN

pub fn is_qdec(&self) -> bool

Checks if the value of the field is QDEC

impl R<u8, RISEA_A>

pub fn variant(&self) -> RISEA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, FALLA_A>

pub fn variant(&self) -> FALLA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, CLKSEL_A>

pub fn variant(&self) -> Variant<u8, CLKSEL_A>

Get enumerated values variant

pub fn is_preschfperclk(&self) -> bool

Checks if the value of the field is PRESCHFPERCLK

pub fn is_cc1(&self) -> bool

Checks if the value of the field is CC1

pub fn is_timerouf(&self) -> bool

Checks if the value of the field is TIMEROUF

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - Timer Mode

pub fn sync(&self) -> SYNC_R

Bit 3 - Timer Start/Stop/Reload Synchronization

pub fn osmen(&self) -> OSMEN_R

Bit 4 - One-shot Mode Enable

pub fn qdm(&self) -> QDM_R

Bit 5 - Quadrature Decoder Mode Selection

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 6 - Debug Mode Run Enable

pub fn dmaclract(&self) -> DMACLRACT_R

Bit 7 - DMA Request Clear on Active

pub fn risea(&self) -> RISEA_R

Bits 8:9 - Timer Rising Input Edge Action

pub fn falla(&self) -> FALLA_R

Bits 10:11 - Timer Falling Input Edge Action

pub fn x2cnt(&self) -> X2CNT_R

Bit 13 - 2x Count Mode

pub fn dissyncout(&self) -> DISSYNCOUT_R

Bit 14 - Disable Timer From Start/Stop/Reload Other Synchronized Timers

pub fn clksel(&self) -> CLKSEL_R

Bits 16:17 - Clock Source Select

pub fn presc(&self) -> PRESC_R

Bits 24:27 - Prescaler Setting

pub fn ati(&self) -> ATI_R

Bit 28 - Always Track Inputs

pub fn rsscoist(&self) -> RSSCOIST_R

Bit 29 - Reload-Start Sets Compare Output Initial State

impl R<u32, Reg<u32, _STATUS>>

pub fn running(&self) -> RUNNING_R

Bit 0 - Running

pub fn dir(&self) -> DIR_R

Bit 1 - Direction

pub fn topbv(&self) -> TOPBV_R

Bit 2 - TOPB Valid

pub fn ccvbv0(&self) -> CCVBV0_R

Bit 8 - CC0 CCVB Valid

pub fn ccvbv1(&self) -> CCVBV1_R

Bit 9 - CC1 CCVB Valid

pub fn ccvbv2(&self) -> CCVBV2_R

Bit 10 - CC2 CCVB Valid

pub fn ccvbv3(&self) -> CCVBV3_R

Bit 11 - CC3 CCVB Valid

pub fn icv0(&self) -> ICV0_R

Bit 16 - CC0 Input Capture Valid

pub fn icv1(&self) -> ICV1_R

Bit 17 - CC1 Input Capture Valid

pub fn icv2(&self) -> ICV2_R

Bit 18 - CC2 Input Capture Valid

pub fn icv3(&self) -> ICV3_R

Bit 19 - CC3 Input Capture Valid

pub fn ccpol0(&self) -> CCPOL0_R

Bit 24 - CC0 Polarity

pub fn ccpol1(&self) -> CCPOL1_R

Bit 25 - CC1 Polarity

pub fn ccpol2(&self) -> CCPOL2_R

Bit 26 - CC2 Polarity

pub fn ccpol3(&self) -> CCPOL3_R

Bit 27 - CC3 Polarity

impl R<u32, Reg<u32, _IF>>

pub fn of(&self) -> OF_R

Bit 0 - Overflow Interrupt Flag

pub fn uf(&self) -> UF_R

Bit 1 - Underflow Interrupt Flag

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - Direction Change Detect Interrupt Flag

pub fn cc0(&self) -> CC0_R

Bit 4 - CC Channel 0 Interrupt Flag

pub fn cc1(&self) -> CC1_R

Bit 5 - CC Channel 1 Interrupt Flag

pub fn cc2(&self) -> CC2_R

Bit 6 - CC Channel 2 Interrupt Flag

pub fn cc3(&self) -> CC3_R

Bit 7 - CC Channel 3 Interrupt Flag

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - CC Channel 0 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - CC Channel 1 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - CC Channel 2 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - CC Channel 3 Input Capture Buffer Overflow Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn of(&self) -> OF_R

Bit 0 - OF Interrupt Enable

pub fn uf(&self) -> UF_R

Bit 1 - UF Interrupt Enable

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - DIRCHG Interrupt Enable

pub fn cc0(&self) -> CC0_R

Bit 4 - CC0 Interrupt Enable

pub fn cc1(&self) -> CC1_R

Bit 5 - CC1 Interrupt Enable

pub fn cc2(&self) -> CC2_R

Bit 6 - CC2 Interrupt Enable

pub fn cc3(&self) -> CC3_R

Bit 7 - CC3 Interrupt Enable

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - ICBOF0 Interrupt Enable

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - ICBOF1 Interrupt Enable

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - ICBOF2 Interrupt Enable

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - ICBOF3 Interrupt Enable

impl R<u32, Reg<u32, _TOP>>

pub fn top(&self) -> TOP_R

Bits 0:31 - Counter Top Value

impl R<u32, Reg<u32, _TOPB>>

pub fn topb(&self) -> TOPB_R

Bits 0:31 - Counter Top Value Buffer

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:31 - Counter Value

impl R<u16, TIMERLOCKKEY_A>

pub fn variant(&self) -> Variant<u16, TIMERLOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn timerlockkey(&self) -> TIMERLOCKKEY_R

Bits 0:15 - Timer Lock Key

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn cc0pen(&self) -> CC0PEN_R

Bit 0 - CC Channel 0 Pin Enable

pub fn cc1pen(&self) -> CC1PEN_R

Bit 1 - CC Channel 1 Pin Enable

pub fn cc2pen(&self) -> CC2PEN_R

Bit 2 - CC Channel 2 Pin Enable

pub fn cc3pen(&self) -> CC3PEN_R

Bit 3 - CC Channel 3 Pin Enable

pub fn cdti0pen(&self) -> CDTI0PEN_R

Bit 8 - CC Channel 0 Complementary Dead-Time Insertion Pin Enable

pub fn cdti1pen(&self) -> CDTI1PEN_R

Bit 9 - CC Channel 1 Complementary Dead-Time Insertion Pin Enable

pub fn cdti2pen(&self) -> CDTI2PEN_R

Bit 10 - CC Channel 2 Complementary Dead-Time Insertion Pin Enable

impl R<u8, CC0LOC_A>

pub fn variant(&self) -> Variant<u8, CC0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC1LOC_A>

pub fn variant(&self) -> Variant<u8, CC1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC2LOC_A>

pub fn variant(&self) -> Variant<u8, CC2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC3LOC_A>

pub fn variant(&self) -> Variant<u8, CC3LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn cc0loc(&self) -> CC0LOC_R

Bits 0:5 - I/O Location

pub fn cc1loc(&self) -> CC1LOC_R

Bits 8:13 - I/O Location

pub fn cc2loc(&self) -> CC2LOC_R

Bits 16:21 - I/O Location

pub fn cc3loc(&self) -> CC3LOC_R

Bits 24:29 - I/O Location

impl R<u8, CDTI0LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI1LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI2LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u32, Reg<u32, _ROUTELOC2>>

pub fn cdti0loc(&self) -> CDTI0LOC_R

Bits 0:5 - I/O Location

pub fn cdti1loc(&self) -> CDTI1LOC_R

Bits 8:13 - I/O Location

pub fn cdti2loc(&self) -> CDTI2LOC_R

Bits 16:21 - I/O Location

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC0_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC0_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC0_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC0_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC1_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC1_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC1_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC1_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC2_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC2_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC2_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC2_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC3_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC3_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC3_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC3_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, DTPRSSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _DTCTRL>>

pub fn dten(&self) -> DTEN_R

Bit 0 - DTI Enable

pub fn dtdas(&self) -> DTDAS_R

Bit 1 - DTI Automatic Start-up Functionality

pub fn dtipol(&self) -> DTIPOL_R

Bit 2 - DTI Inactive Polarity

pub fn dtcinv(&self) -> DTCINV_R

Bit 3 - DTI Complementary Output Invert

pub fn dtprssel(&self) -> DTPRSSEL_R

Bits 4:8 - DTI PRS Source Channel Select

pub fn dtar(&self) -> DTAR_R

Bit 9 - DTI Always Run

pub fn dtfats(&self) -> DTFATS_R

Bit 10 - DTI Fault Action on Timer Stop

pub fn dtprsen(&self) -> DTPRSEN_R

Bit 24 - DTI PRS Source Enable

impl R<u8, DTPRESC_A>

pub fn variant(&self) -> Variant<u8, DTPRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _DTTIME>>

pub fn dtpresc(&self) -> DTPRESC_R

Bits 0:3 - DTI Prescaler Setting

pub fn dtriset(&self) -> DTRISET_R

Bits 8:13 - DTI Rise-time

pub fn dtfallt(&self) -> DTFALLT_R

Bits 16:21 - DTI Fall-time

impl R<u8, DTPRS0FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS0FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTPRS1FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS1FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTFA_A>

pub fn variant(&self) -> DTFA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_inactive(&self) -> bool

Checks if the value of the field is INACTIVE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_tristate(&self) -> bool

Checks if the value of the field is TRISTATE

impl R<u32, Reg<u32, _DTFC>>

pub fn dtprs0fsel(&self) -> DTPRS0FSEL_R

Bits 0:4 - DTI PRS Fault Source 0 Select

pub fn dtprs1fsel(&self) -> DTPRS1FSEL_R

Bits 8:12 - DTI PRS Fault Source 1 Select

pub fn dtfa(&self) -> DTFA_R

Bits 16:17 - DTI Fault Action

pub fn dtprs0fen(&self) -> DTPRS0FEN_R

Bit 24 - DTI PRS 0 Fault Enable

pub fn dtprs1fen(&self) -> DTPRS1FEN_R

Bit 25 - DTI PRS 1 Fault Enable

pub fn dtdbgfen(&self) -> DTDBGFEN_R

Bit 26 - DTI Debugger Fault Enable

pub fn dtlockupfen(&self) -> DTLOCKUPFEN_R

Bit 27 - DTI Lockup Fault Enable

impl R<u32, Reg<u32, _DTOGEN>>

pub fn dtogcc0en(&self) -> DTOGCC0EN_R

Bit 0 - DTI CC0 Output Generation Enable

pub fn dtogcc1en(&self) -> DTOGCC1EN_R

Bit 1 - DTI CC1 Output Generation Enable

pub fn dtogcc2en(&self) -> DTOGCC2EN_R

Bit 2 - DTI CC2 Output Generation Enable

pub fn dtogcdti0en(&self) -> DTOGCDTI0EN_R

Bit 3 - DTI CDTI0 Output Generation Enable

pub fn dtogcdti1en(&self) -> DTOGCDTI1EN_R

Bit 4 - DTI CDTI1 Output Generation Enable

pub fn dtogcdti2en(&self) -> DTOGCDTI2EN_R

Bit 5 - DTI CDTI2 Output Generation Enable

impl R<u32, Reg<u32, _DTFAULT>>

pub fn dtprs0f(&self) -> DTPRS0F_R

Bit 0 - DTI PRS 0 Fault

pub fn dtprs1f(&self) -> DTPRS1F_R

Bit 1 - DTI PRS 1 Fault

pub fn dtdbgf(&self) -> DTDBGF_R

Bit 2 - DTI Debugger Fault

pub fn dtlockupf(&self) -> DTLOCKUPF_R

Bit 3 - DTI Lockup Fault

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _DTLOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - DTI Lock Key

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_updown(&self) -> bool

Checks if the value of the field is UPDOWN

pub fn is_qdec(&self) -> bool

Checks if the value of the field is QDEC

impl R<u8, RISEA_A>

pub fn variant(&self) -> RISEA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, FALLA_A>

pub fn variant(&self) -> FALLA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, CLKSEL_A>

pub fn variant(&self) -> Variant<u8, CLKSEL_A>

Get enumerated values variant

pub fn is_preschfperclk(&self) -> bool

Checks if the value of the field is PRESCHFPERCLK

pub fn is_cc1(&self) -> bool

Checks if the value of the field is CC1

pub fn is_timerouf(&self) -> bool

Checks if the value of the field is TIMEROUF

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - Timer Mode

pub fn sync(&self) -> SYNC_R

Bit 3 - Timer Start/Stop/Reload Synchronization

pub fn osmen(&self) -> OSMEN_R

Bit 4 - One-shot Mode Enable

pub fn qdm(&self) -> QDM_R

Bit 5 - Quadrature Decoder Mode Selection

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 6 - Debug Mode Run Enable

pub fn dmaclract(&self) -> DMACLRACT_R

Bit 7 - DMA Request Clear on Active

pub fn risea(&self) -> RISEA_R

Bits 8:9 - Timer Rising Input Edge Action

pub fn falla(&self) -> FALLA_R

Bits 10:11 - Timer Falling Input Edge Action

pub fn x2cnt(&self) -> X2CNT_R

Bit 13 - 2x Count Mode

pub fn dissyncout(&self) -> DISSYNCOUT_R

Bit 14 - Disable Timer From Start/Stop/Reload Other Synchronized Timers

pub fn clksel(&self) -> CLKSEL_R

Bits 16:17 - Clock Source Select

pub fn presc(&self) -> PRESC_R

Bits 24:27 - Prescaler Setting

pub fn ati(&self) -> ATI_R

Bit 28 - Always Track Inputs

pub fn rsscoist(&self) -> RSSCOIST_R

Bit 29 - Reload-Start Sets Compare Output Initial State

impl R<u32, Reg<u32, _STATUS>>

pub fn running(&self) -> RUNNING_R

Bit 0 - Running

pub fn dir(&self) -> DIR_R

Bit 1 - Direction

pub fn topbv(&self) -> TOPBV_R

Bit 2 - TOPB Valid

pub fn ccvbv0(&self) -> CCVBV0_R

Bit 8 - CC0 CCVB Valid

pub fn ccvbv1(&self) -> CCVBV1_R

Bit 9 - CC1 CCVB Valid

pub fn ccvbv2(&self) -> CCVBV2_R

Bit 10 - CC2 CCVB Valid

pub fn ccvbv3(&self) -> CCVBV3_R

Bit 11 - CC3 CCVB Valid

pub fn icv0(&self) -> ICV0_R

Bit 16 - CC0 Input Capture Valid

pub fn icv1(&self) -> ICV1_R

Bit 17 - CC1 Input Capture Valid

pub fn icv2(&self) -> ICV2_R

Bit 18 - CC2 Input Capture Valid

pub fn icv3(&self) -> ICV3_R

Bit 19 - CC3 Input Capture Valid

pub fn ccpol0(&self) -> CCPOL0_R

Bit 24 - CC0 Polarity

pub fn ccpol1(&self) -> CCPOL1_R

Bit 25 - CC1 Polarity

pub fn ccpol2(&self) -> CCPOL2_R

Bit 26 - CC2 Polarity

pub fn ccpol3(&self) -> CCPOL3_R

Bit 27 - CC3 Polarity

impl R<u32, Reg<u32, _IF>>

pub fn of(&self) -> OF_R

Bit 0 - Overflow Interrupt Flag

pub fn uf(&self) -> UF_R

Bit 1 - Underflow Interrupt Flag

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - Direction Change Detect Interrupt Flag

pub fn cc0(&self) -> CC0_R

Bit 4 - CC Channel 0 Interrupt Flag

pub fn cc1(&self) -> CC1_R

Bit 5 - CC Channel 1 Interrupt Flag

pub fn cc2(&self) -> CC2_R

Bit 6 - CC Channel 2 Interrupt Flag

pub fn cc3(&self) -> CC3_R

Bit 7 - CC Channel 3 Interrupt Flag

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - CC Channel 0 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - CC Channel 1 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - CC Channel 2 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - CC Channel 3 Input Capture Buffer Overflow Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn of(&self) -> OF_R

Bit 0 - OF Interrupt Enable

pub fn uf(&self) -> UF_R

Bit 1 - UF Interrupt Enable

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - DIRCHG Interrupt Enable

pub fn cc0(&self) -> CC0_R

Bit 4 - CC0 Interrupt Enable

pub fn cc1(&self) -> CC1_R

Bit 5 - CC1 Interrupt Enable

pub fn cc2(&self) -> CC2_R

Bit 6 - CC2 Interrupt Enable

pub fn cc3(&self) -> CC3_R

Bit 7 - CC3 Interrupt Enable

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - ICBOF0 Interrupt Enable

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - ICBOF1 Interrupt Enable

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - ICBOF2 Interrupt Enable

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - ICBOF3 Interrupt Enable

impl R<u32, Reg<u32, _TOP>>

pub fn top(&self) -> TOP_R

Bits 0:31 - Counter Top Value

impl R<u32, Reg<u32, _TOPB>>

pub fn topb(&self) -> TOPB_R

Bits 0:31 - Counter Top Value Buffer

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:31 - Counter Value

impl R<u16, TIMERLOCKKEY_A>

pub fn variant(&self) -> Variant<u16, TIMERLOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn timerlockkey(&self) -> TIMERLOCKKEY_R

Bits 0:15 - Timer Lock Key

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn cc0pen(&self) -> CC0PEN_R

Bit 0 - CC Channel 0 Pin Enable

pub fn cc1pen(&self) -> CC1PEN_R

Bit 1 - CC Channel 1 Pin Enable

pub fn cc2pen(&self) -> CC2PEN_R

Bit 2 - CC Channel 2 Pin Enable

pub fn cc3pen(&self) -> CC3PEN_R

Bit 3 - CC Channel 3 Pin Enable

pub fn cdti0pen(&self) -> CDTI0PEN_R

Bit 8 - CC Channel 0 Complementary Dead-Time Insertion Pin Enable

pub fn cdti1pen(&self) -> CDTI1PEN_R

Bit 9 - CC Channel 1 Complementary Dead-Time Insertion Pin Enable

pub fn cdti2pen(&self) -> CDTI2PEN_R

Bit 10 - CC Channel 2 Complementary Dead-Time Insertion Pin Enable

impl R<u8, CC0LOC_A>

pub fn variant(&self) -> Variant<u8, CC0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC1LOC_A>

pub fn variant(&self) -> Variant<u8, CC1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC2LOC_A>

pub fn variant(&self) -> Variant<u8, CC2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC3LOC_A>

pub fn variant(&self) -> Variant<u8, CC3LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn cc0loc(&self) -> CC0LOC_R

Bits 0:5 - I/O Location

pub fn cc1loc(&self) -> CC1LOC_R

Bits 8:13 - I/O Location

pub fn cc2loc(&self) -> CC2LOC_R

Bits 16:21 - I/O Location

pub fn cc3loc(&self) -> CC3LOC_R

Bits 24:29 - I/O Location

impl R<u8, CDTI0LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI1LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI2LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u32, Reg<u32, _ROUTELOC2>>

pub fn cdti0loc(&self) -> CDTI0LOC_R

Bits 0:5 - I/O Location

pub fn cdti1loc(&self) -> CDTI1LOC_R

Bits 8:13 - I/O Location

pub fn cdti2loc(&self) -> CDTI2LOC_R

Bits 16:21 - I/O Location

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC0_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC0_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC0_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC0_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC1_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC1_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC1_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC1_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC2_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC2_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC2_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC2_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC3_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC3_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC3_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC3_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, DTPRSSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _DTCTRL>>

pub fn dten(&self) -> DTEN_R

Bit 0 - DTI Enable

pub fn dtdas(&self) -> DTDAS_R

Bit 1 - DTI Automatic Start-up Functionality

pub fn dtipol(&self) -> DTIPOL_R

Bit 2 - DTI Inactive Polarity

pub fn dtcinv(&self) -> DTCINV_R

Bit 3 - DTI Complementary Output Invert

pub fn dtprssel(&self) -> DTPRSSEL_R

Bits 4:8 - DTI PRS Source Channel Select

pub fn dtar(&self) -> DTAR_R

Bit 9 - DTI Always Run

pub fn dtfats(&self) -> DTFATS_R

Bit 10 - DTI Fault Action on Timer Stop

pub fn dtprsen(&self) -> DTPRSEN_R

Bit 24 - DTI PRS Source Enable

impl R<u8, DTPRESC_A>

pub fn variant(&self) -> Variant<u8, DTPRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _DTTIME>>

pub fn dtpresc(&self) -> DTPRESC_R

Bits 0:3 - DTI Prescaler Setting

pub fn dtriset(&self) -> DTRISET_R

Bits 8:13 - DTI Rise-time

pub fn dtfallt(&self) -> DTFALLT_R

Bits 16:21 - DTI Fall-time

impl R<u8, DTPRS0FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS0FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTPRS1FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS1FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTFA_A>

pub fn variant(&self) -> DTFA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_inactive(&self) -> bool

Checks if the value of the field is INACTIVE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_tristate(&self) -> bool

Checks if the value of the field is TRISTATE

impl R<u32, Reg<u32, _DTFC>>

pub fn dtprs0fsel(&self) -> DTPRS0FSEL_R

Bits 0:4 - DTI PRS Fault Source 0 Select

pub fn dtprs1fsel(&self) -> DTPRS1FSEL_R

Bits 8:12 - DTI PRS Fault Source 1 Select

pub fn dtfa(&self) -> DTFA_R

Bits 16:17 - DTI Fault Action

pub fn dtprs0fen(&self) -> DTPRS0FEN_R

Bit 24 - DTI PRS 0 Fault Enable

pub fn dtprs1fen(&self) -> DTPRS1FEN_R

Bit 25 - DTI PRS 1 Fault Enable

pub fn dtdbgfen(&self) -> DTDBGFEN_R

Bit 26 - DTI Debugger Fault Enable

pub fn dtlockupfen(&self) -> DTLOCKUPFEN_R

Bit 27 - DTI Lockup Fault Enable

impl R<u32, Reg<u32, _DTOGEN>>

pub fn dtogcc0en(&self) -> DTOGCC0EN_R

Bit 0 - DTI CC0 Output Generation Enable

pub fn dtogcc1en(&self) -> DTOGCC1EN_R

Bit 1 - DTI CC1 Output Generation Enable

pub fn dtogcc2en(&self) -> DTOGCC2EN_R

Bit 2 - DTI CC2 Output Generation Enable

pub fn dtogcdti0en(&self) -> DTOGCDTI0EN_R

Bit 3 - DTI CDTI0 Output Generation Enable

pub fn dtogcdti1en(&self) -> DTOGCDTI1EN_R

Bit 4 - DTI CDTI1 Output Generation Enable

pub fn dtogcdti2en(&self) -> DTOGCDTI2EN_R

Bit 5 - DTI CDTI2 Output Generation Enable

impl R<u32, Reg<u32, _DTFAULT>>

pub fn dtprs0f(&self) -> DTPRS0F_R

Bit 0 - DTI PRS 0 Fault

pub fn dtprs1f(&self) -> DTPRS1F_R

Bit 1 - DTI PRS 1 Fault

pub fn dtdbgf(&self) -> DTDBGF_R

Bit 2 - DTI Debugger Fault

pub fn dtlockupf(&self) -> DTLOCKUPF_R

Bit 3 - DTI Lockup Fault

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _DTLOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - DTI Lock Key

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_updown(&self) -> bool

Checks if the value of the field is UPDOWN

pub fn is_qdec(&self) -> bool

Checks if the value of the field is QDEC

impl R<u8, RISEA_A>

pub fn variant(&self) -> RISEA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, FALLA_A>

pub fn variant(&self) -> FALLA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, CLKSEL_A>

pub fn variant(&self) -> Variant<u8, CLKSEL_A>

Get enumerated values variant

pub fn is_preschfperclk(&self) -> bool

Checks if the value of the field is PRESCHFPERCLK

pub fn is_cc1(&self) -> bool

Checks if the value of the field is CC1

pub fn is_timerouf(&self) -> bool

Checks if the value of the field is TIMEROUF

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - Timer Mode

pub fn sync(&self) -> SYNC_R

Bit 3 - Timer Start/Stop/Reload Synchronization

pub fn osmen(&self) -> OSMEN_R

Bit 4 - One-shot Mode Enable

pub fn qdm(&self) -> QDM_R

Bit 5 - Quadrature Decoder Mode Selection

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 6 - Debug Mode Run Enable

pub fn dmaclract(&self) -> DMACLRACT_R

Bit 7 - DMA Request Clear on Active

pub fn risea(&self) -> RISEA_R

Bits 8:9 - Timer Rising Input Edge Action

pub fn falla(&self) -> FALLA_R

Bits 10:11 - Timer Falling Input Edge Action

pub fn x2cnt(&self) -> X2CNT_R

Bit 13 - 2x Count Mode

pub fn dissyncout(&self) -> DISSYNCOUT_R

Bit 14 - Disable Timer From Start/Stop/Reload Other Synchronized Timers

pub fn clksel(&self) -> CLKSEL_R

Bits 16:17 - Clock Source Select

pub fn presc(&self) -> PRESC_R

Bits 24:27 - Prescaler Setting

pub fn ati(&self) -> ATI_R

Bit 28 - Always Track Inputs

pub fn rsscoist(&self) -> RSSCOIST_R

Bit 29 - Reload-Start Sets Compare Output Initial State

impl R<u32, Reg<u32, _STATUS>>

pub fn running(&self) -> RUNNING_R

Bit 0 - Running

pub fn dir(&self) -> DIR_R

Bit 1 - Direction

pub fn topbv(&self) -> TOPBV_R

Bit 2 - TOPB Valid

pub fn ccvbv0(&self) -> CCVBV0_R

Bit 8 - CC0 CCVB Valid

pub fn ccvbv1(&self) -> CCVBV1_R

Bit 9 - CC1 CCVB Valid

pub fn ccvbv2(&self) -> CCVBV2_R

Bit 10 - CC2 CCVB Valid

pub fn ccvbv3(&self) -> CCVBV3_R

Bit 11 - CC3 CCVB Valid

pub fn icv0(&self) -> ICV0_R

Bit 16 - CC0 Input Capture Valid

pub fn icv1(&self) -> ICV1_R

Bit 17 - CC1 Input Capture Valid

pub fn icv2(&self) -> ICV2_R

Bit 18 - CC2 Input Capture Valid

pub fn icv3(&self) -> ICV3_R

Bit 19 - CC3 Input Capture Valid

pub fn ccpol0(&self) -> CCPOL0_R

Bit 24 - CC0 Polarity

pub fn ccpol1(&self) -> CCPOL1_R

Bit 25 - CC1 Polarity

pub fn ccpol2(&self) -> CCPOL2_R

Bit 26 - CC2 Polarity

pub fn ccpol3(&self) -> CCPOL3_R

Bit 27 - CC3 Polarity

impl R<u32, Reg<u32, _IF>>

pub fn of(&self) -> OF_R

Bit 0 - Overflow Interrupt Flag

pub fn uf(&self) -> UF_R

Bit 1 - Underflow Interrupt Flag

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - Direction Change Detect Interrupt Flag

pub fn cc0(&self) -> CC0_R

Bit 4 - CC Channel 0 Interrupt Flag

pub fn cc1(&self) -> CC1_R

Bit 5 - CC Channel 1 Interrupt Flag

pub fn cc2(&self) -> CC2_R

Bit 6 - CC Channel 2 Interrupt Flag

pub fn cc3(&self) -> CC3_R

Bit 7 - CC Channel 3 Interrupt Flag

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - CC Channel 0 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - CC Channel 1 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - CC Channel 2 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - CC Channel 3 Input Capture Buffer Overflow Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn of(&self) -> OF_R

Bit 0 - OF Interrupt Enable

pub fn uf(&self) -> UF_R

Bit 1 - UF Interrupt Enable

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - DIRCHG Interrupt Enable

pub fn cc0(&self) -> CC0_R

Bit 4 - CC0 Interrupt Enable

pub fn cc1(&self) -> CC1_R

Bit 5 - CC1 Interrupt Enable

pub fn cc2(&self) -> CC2_R

Bit 6 - CC2 Interrupt Enable

pub fn cc3(&self) -> CC3_R

Bit 7 - CC3 Interrupt Enable

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - ICBOF0 Interrupt Enable

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - ICBOF1 Interrupt Enable

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - ICBOF2 Interrupt Enable

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - ICBOF3 Interrupt Enable

impl R<u32, Reg<u32, _TOP>>

pub fn top(&self) -> TOP_R

Bits 0:31 - Counter Top Value

impl R<u32, Reg<u32, _TOPB>>

pub fn topb(&self) -> TOPB_R

Bits 0:31 - Counter Top Value Buffer

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:31 - Counter Value

impl R<u16, TIMERLOCKKEY_A>

pub fn variant(&self) -> Variant<u16, TIMERLOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn timerlockkey(&self) -> TIMERLOCKKEY_R

Bits 0:15 - Timer Lock Key

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn cc0pen(&self) -> CC0PEN_R

Bit 0 - CC Channel 0 Pin Enable

pub fn cc1pen(&self) -> CC1PEN_R

Bit 1 - CC Channel 1 Pin Enable

pub fn cc2pen(&self) -> CC2PEN_R

Bit 2 - CC Channel 2 Pin Enable

pub fn cc3pen(&self) -> CC3PEN_R

Bit 3 - CC Channel 3 Pin Enable

pub fn cdti0pen(&self) -> CDTI0PEN_R

Bit 8 - CC Channel 0 Complementary Dead-Time Insertion Pin Enable

pub fn cdti1pen(&self) -> CDTI1PEN_R

Bit 9 - CC Channel 1 Complementary Dead-Time Insertion Pin Enable

pub fn cdti2pen(&self) -> CDTI2PEN_R

Bit 10 - CC Channel 2 Complementary Dead-Time Insertion Pin Enable

impl R<u8, CC0LOC_A>

pub fn variant(&self) -> Variant<u8, CC0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC1LOC_A>

pub fn variant(&self) -> Variant<u8, CC1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC2LOC_A>

pub fn variant(&self) -> Variant<u8, CC2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC3LOC_A>

pub fn variant(&self) -> Variant<u8, CC3LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn cc0loc(&self) -> CC0LOC_R

Bits 0:5 - I/O Location

pub fn cc1loc(&self) -> CC1LOC_R

Bits 8:13 - I/O Location

pub fn cc2loc(&self) -> CC2LOC_R

Bits 16:21 - I/O Location

pub fn cc3loc(&self) -> CC3LOC_R

Bits 24:29 - I/O Location

impl R<u8, CDTI0LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI1LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI2LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u32, Reg<u32, _ROUTELOC2>>

pub fn cdti0loc(&self) -> CDTI0LOC_R

Bits 0:5 - I/O Location

pub fn cdti1loc(&self) -> CDTI1LOC_R

Bits 8:13 - I/O Location

pub fn cdti2loc(&self) -> CDTI2LOC_R

Bits 16:21 - I/O Location

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC0_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC0_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC0_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC0_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC1_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC1_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC1_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC1_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC2_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC2_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC2_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC2_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC3_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC3_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC3_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC3_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, DTPRSSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _DTCTRL>>

pub fn dten(&self) -> DTEN_R

Bit 0 - DTI Enable

pub fn dtdas(&self) -> DTDAS_R

Bit 1 - DTI Automatic Start-up Functionality

pub fn dtipol(&self) -> DTIPOL_R

Bit 2 - DTI Inactive Polarity

pub fn dtcinv(&self) -> DTCINV_R

Bit 3 - DTI Complementary Output Invert

pub fn dtprssel(&self) -> DTPRSSEL_R

Bits 4:8 - DTI PRS Source Channel Select

pub fn dtar(&self) -> DTAR_R

Bit 9 - DTI Always Run

pub fn dtfats(&self) -> DTFATS_R

Bit 10 - DTI Fault Action on Timer Stop

pub fn dtprsen(&self) -> DTPRSEN_R

Bit 24 - DTI PRS Source Enable

impl R<u8, DTPRESC_A>

pub fn variant(&self) -> Variant<u8, DTPRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _DTTIME>>

pub fn dtpresc(&self) -> DTPRESC_R

Bits 0:3 - DTI Prescaler Setting

pub fn dtriset(&self) -> DTRISET_R

Bits 8:13 - DTI Rise-time

pub fn dtfallt(&self) -> DTFALLT_R

Bits 16:21 - DTI Fall-time

impl R<u8, DTPRS0FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS0FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTPRS1FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS1FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTFA_A>

pub fn variant(&self) -> DTFA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_inactive(&self) -> bool

Checks if the value of the field is INACTIVE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_tristate(&self) -> bool

Checks if the value of the field is TRISTATE

impl R<u32, Reg<u32, _DTFC>>

pub fn dtprs0fsel(&self) -> DTPRS0FSEL_R

Bits 0:4 - DTI PRS Fault Source 0 Select

pub fn dtprs1fsel(&self) -> DTPRS1FSEL_R

Bits 8:12 - DTI PRS Fault Source 1 Select

pub fn dtfa(&self) -> DTFA_R

Bits 16:17 - DTI Fault Action

pub fn dtprs0fen(&self) -> DTPRS0FEN_R

Bit 24 - DTI PRS 0 Fault Enable

pub fn dtprs1fen(&self) -> DTPRS1FEN_R

Bit 25 - DTI PRS 1 Fault Enable

pub fn dtdbgfen(&self) -> DTDBGFEN_R

Bit 26 - DTI Debugger Fault Enable

pub fn dtlockupfen(&self) -> DTLOCKUPFEN_R

Bit 27 - DTI Lockup Fault Enable

impl R<u32, Reg<u32, _DTOGEN>>

pub fn dtogcc0en(&self) -> DTOGCC0EN_R

Bit 0 - DTI CC0 Output Generation Enable

pub fn dtogcc1en(&self) -> DTOGCC1EN_R

Bit 1 - DTI CC1 Output Generation Enable

pub fn dtogcc2en(&self) -> DTOGCC2EN_R

Bit 2 - DTI CC2 Output Generation Enable

pub fn dtogcdti0en(&self) -> DTOGCDTI0EN_R

Bit 3 - DTI CDTI0 Output Generation Enable

pub fn dtogcdti1en(&self) -> DTOGCDTI1EN_R

Bit 4 - DTI CDTI1 Output Generation Enable

pub fn dtogcdti2en(&self) -> DTOGCDTI2EN_R

Bit 5 - DTI CDTI2 Output Generation Enable

impl R<u32, Reg<u32, _DTFAULT>>

pub fn dtprs0f(&self) -> DTPRS0F_R

Bit 0 - DTI PRS 0 Fault

pub fn dtprs1f(&self) -> DTPRS1F_R

Bit 1 - DTI PRS 1 Fault

pub fn dtdbgf(&self) -> DTDBGF_R

Bit 2 - DTI Debugger Fault

pub fn dtlockupf(&self) -> DTLOCKUPF_R

Bit 3 - DTI Lockup Fault

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _DTLOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - DTI Lock Key

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_updown(&self) -> bool

Checks if the value of the field is UPDOWN

pub fn is_qdec(&self) -> bool

Checks if the value of the field is QDEC

impl R<u8, RISEA_A>

pub fn variant(&self) -> RISEA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, FALLA_A>

pub fn variant(&self) -> FALLA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, CLKSEL_A>

pub fn variant(&self) -> Variant<u8, CLKSEL_A>

Get enumerated values variant

pub fn is_preschfperclk(&self) -> bool

Checks if the value of the field is PRESCHFPERCLK

pub fn is_cc1(&self) -> bool

Checks if the value of the field is CC1

pub fn is_timerouf(&self) -> bool

Checks if the value of the field is TIMEROUF

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - Timer Mode

pub fn sync(&self) -> SYNC_R

Bit 3 - Timer Start/Stop/Reload Synchronization

pub fn osmen(&self) -> OSMEN_R

Bit 4 - One-shot Mode Enable

pub fn qdm(&self) -> QDM_R

Bit 5 - Quadrature Decoder Mode Selection

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 6 - Debug Mode Run Enable

pub fn dmaclract(&self) -> DMACLRACT_R

Bit 7 - DMA Request Clear on Active

pub fn risea(&self) -> RISEA_R

Bits 8:9 - Timer Rising Input Edge Action

pub fn falla(&self) -> FALLA_R

Bits 10:11 - Timer Falling Input Edge Action

pub fn x2cnt(&self) -> X2CNT_R

Bit 13 - 2x Count Mode

pub fn dissyncout(&self) -> DISSYNCOUT_R

Bit 14 - Disable Timer From Start/Stop/Reload Other Synchronized Timers

pub fn clksel(&self) -> CLKSEL_R

Bits 16:17 - Clock Source Select

pub fn presc(&self) -> PRESC_R

Bits 24:27 - Prescaler Setting

pub fn ati(&self) -> ATI_R

Bit 28 - Always Track Inputs

pub fn rsscoist(&self) -> RSSCOIST_R

Bit 29 - Reload-Start Sets Compare Output Initial State

impl R<u32, Reg<u32, _STATUS>>

pub fn running(&self) -> RUNNING_R

Bit 0 - Running

pub fn dir(&self) -> DIR_R

Bit 1 - Direction

pub fn topbv(&self) -> TOPBV_R

Bit 2 - TOPB Valid

pub fn ccvbv0(&self) -> CCVBV0_R

Bit 8 - CC0 CCVB Valid

pub fn ccvbv1(&self) -> CCVBV1_R

Bit 9 - CC1 CCVB Valid

pub fn ccvbv2(&self) -> CCVBV2_R

Bit 10 - CC2 CCVB Valid

pub fn ccvbv3(&self) -> CCVBV3_R

Bit 11 - CC3 CCVB Valid

pub fn icv0(&self) -> ICV0_R

Bit 16 - CC0 Input Capture Valid

pub fn icv1(&self) -> ICV1_R

Bit 17 - CC1 Input Capture Valid

pub fn icv2(&self) -> ICV2_R

Bit 18 - CC2 Input Capture Valid

pub fn icv3(&self) -> ICV3_R

Bit 19 - CC3 Input Capture Valid

pub fn ccpol0(&self) -> CCPOL0_R

Bit 24 - CC0 Polarity

pub fn ccpol1(&self) -> CCPOL1_R

Bit 25 - CC1 Polarity

pub fn ccpol2(&self) -> CCPOL2_R

Bit 26 - CC2 Polarity

pub fn ccpol3(&self) -> CCPOL3_R

Bit 27 - CC3 Polarity

impl R<u32, Reg<u32, _IF>>

pub fn of(&self) -> OF_R

Bit 0 - Overflow Interrupt Flag

pub fn uf(&self) -> UF_R

Bit 1 - Underflow Interrupt Flag

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - Direction Change Detect Interrupt Flag

pub fn cc0(&self) -> CC0_R

Bit 4 - CC Channel 0 Interrupt Flag

pub fn cc1(&self) -> CC1_R

Bit 5 - CC Channel 1 Interrupt Flag

pub fn cc2(&self) -> CC2_R

Bit 6 - CC Channel 2 Interrupt Flag

pub fn cc3(&self) -> CC3_R

Bit 7 - CC Channel 3 Interrupt Flag

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - CC Channel 0 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - CC Channel 1 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - CC Channel 2 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - CC Channel 3 Input Capture Buffer Overflow Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn of(&self) -> OF_R

Bit 0 - OF Interrupt Enable

pub fn uf(&self) -> UF_R

Bit 1 - UF Interrupt Enable

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - DIRCHG Interrupt Enable

pub fn cc0(&self) -> CC0_R

Bit 4 - CC0 Interrupt Enable

pub fn cc1(&self) -> CC1_R

Bit 5 - CC1 Interrupt Enable

pub fn cc2(&self) -> CC2_R

Bit 6 - CC2 Interrupt Enable

pub fn cc3(&self) -> CC3_R

Bit 7 - CC3 Interrupt Enable

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - ICBOF0 Interrupt Enable

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - ICBOF1 Interrupt Enable

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - ICBOF2 Interrupt Enable

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - ICBOF3 Interrupt Enable

impl R<u32, Reg<u32, _TOP>>

pub fn top(&self) -> TOP_R

Bits 0:31 - Counter Top Value

impl R<u32, Reg<u32, _TOPB>>

pub fn topb(&self) -> TOPB_R

Bits 0:31 - Counter Top Value Buffer

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:31 - Counter Value

impl R<u16, TIMERLOCKKEY_A>

pub fn variant(&self) -> Variant<u16, TIMERLOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn timerlockkey(&self) -> TIMERLOCKKEY_R

Bits 0:15 - Timer Lock Key

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn cc0pen(&self) -> CC0PEN_R

Bit 0 - CC Channel 0 Pin Enable

pub fn cc1pen(&self) -> CC1PEN_R

Bit 1 - CC Channel 1 Pin Enable

pub fn cc2pen(&self) -> CC2PEN_R

Bit 2 - CC Channel 2 Pin Enable

pub fn cc3pen(&self) -> CC3PEN_R

Bit 3 - CC Channel 3 Pin Enable

pub fn cdti0pen(&self) -> CDTI0PEN_R

Bit 8 - CC Channel 0 Complementary Dead-Time Insertion Pin Enable

pub fn cdti1pen(&self) -> CDTI1PEN_R

Bit 9 - CC Channel 1 Complementary Dead-Time Insertion Pin Enable

pub fn cdti2pen(&self) -> CDTI2PEN_R

Bit 10 - CC Channel 2 Complementary Dead-Time Insertion Pin Enable

impl R<u8, CC0LOC_A>

pub fn variant(&self) -> Variant<u8, CC0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC1LOC_A>

pub fn variant(&self) -> Variant<u8, CC1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC2LOC_A>

pub fn variant(&self) -> Variant<u8, CC2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC3LOC_A>

pub fn variant(&self) -> Variant<u8, CC3LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn cc0loc(&self) -> CC0LOC_R

Bits 0:5 - I/O Location

pub fn cc1loc(&self) -> CC1LOC_R

Bits 8:13 - I/O Location

pub fn cc2loc(&self) -> CC2LOC_R

Bits 16:21 - I/O Location

pub fn cc3loc(&self) -> CC3LOC_R

Bits 24:29 - I/O Location

impl R<u8, CDTI0LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI1LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI2LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u32, Reg<u32, _ROUTELOC2>>

pub fn cdti0loc(&self) -> CDTI0LOC_R

Bits 0:5 - I/O Location

pub fn cdti1loc(&self) -> CDTI1LOC_R

Bits 8:13 - I/O Location

pub fn cdti2loc(&self) -> CDTI2LOC_R

Bits 16:21 - I/O Location

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC0_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC0_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC0_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC0_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC1_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC1_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC1_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC1_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC2_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC2_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC2_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC2_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC3_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC3_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC3_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC3_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, DTPRSSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _DTCTRL>>

pub fn dten(&self) -> DTEN_R

Bit 0 - DTI Enable

pub fn dtdas(&self) -> DTDAS_R

Bit 1 - DTI Automatic Start-up Functionality

pub fn dtipol(&self) -> DTIPOL_R

Bit 2 - DTI Inactive Polarity

pub fn dtcinv(&self) -> DTCINV_R

Bit 3 - DTI Complementary Output Invert

pub fn dtprssel(&self) -> DTPRSSEL_R

Bits 4:8 - DTI PRS Source Channel Select

pub fn dtar(&self) -> DTAR_R

Bit 9 - DTI Always Run

pub fn dtfats(&self) -> DTFATS_R

Bit 10 - DTI Fault Action on Timer Stop

pub fn dtprsen(&self) -> DTPRSEN_R

Bit 24 - DTI PRS Source Enable

impl R<u8, DTPRESC_A>

pub fn variant(&self) -> Variant<u8, DTPRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _DTTIME>>

pub fn dtpresc(&self) -> DTPRESC_R

Bits 0:3 - DTI Prescaler Setting

pub fn dtriset(&self) -> DTRISET_R

Bits 8:13 - DTI Rise-time

pub fn dtfallt(&self) -> DTFALLT_R

Bits 16:21 - DTI Fall-time

impl R<u8, DTPRS0FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS0FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTPRS1FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS1FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTFA_A>

pub fn variant(&self) -> DTFA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_inactive(&self) -> bool

Checks if the value of the field is INACTIVE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_tristate(&self) -> bool

Checks if the value of the field is TRISTATE

impl R<u32, Reg<u32, _DTFC>>

pub fn dtprs0fsel(&self) -> DTPRS0FSEL_R

Bits 0:4 - DTI PRS Fault Source 0 Select

pub fn dtprs1fsel(&self) -> DTPRS1FSEL_R

Bits 8:12 - DTI PRS Fault Source 1 Select

pub fn dtfa(&self) -> DTFA_R

Bits 16:17 - DTI Fault Action

pub fn dtprs0fen(&self) -> DTPRS0FEN_R

Bit 24 - DTI PRS 0 Fault Enable

pub fn dtprs1fen(&self) -> DTPRS1FEN_R

Bit 25 - DTI PRS 1 Fault Enable

pub fn dtdbgfen(&self) -> DTDBGFEN_R

Bit 26 - DTI Debugger Fault Enable

pub fn dtlockupfen(&self) -> DTLOCKUPFEN_R

Bit 27 - DTI Lockup Fault Enable

impl R<u32, Reg<u32, _DTOGEN>>

pub fn dtogcc0en(&self) -> DTOGCC0EN_R

Bit 0 - DTI CC0 Output Generation Enable

pub fn dtogcc1en(&self) -> DTOGCC1EN_R

Bit 1 - DTI CC1 Output Generation Enable

pub fn dtogcc2en(&self) -> DTOGCC2EN_R

Bit 2 - DTI CC2 Output Generation Enable

pub fn dtogcdti0en(&self) -> DTOGCDTI0EN_R

Bit 3 - DTI CDTI0 Output Generation Enable

pub fn dtogcdti1en(&self) -> DTOGCDTI1EN_R

Bit 4 - DTI CDTI1 Output Generation Enable

pub fn dtogcdti2en(&self) -> DTOGCDTI2EN_R

Bit 5 - DTI CDTI2 Output Generation Enable

impl R<u32, Reg<u32, _DTFAULT>>

pub fn dtprs0f(&self) -> DTPRS0F_R

Bit 0 - DTI PRS 0 Fault

pub fn dtprs1f(&self) -> DTPRS1F_R

Bit 1 - DTI PRS 1 Fault

pub fn dtdbgf(&self) -> DTDBGF_R

Bit 2 - DTI Debugger Fault

pub fn dtlockupf(&self) -> DTLOCKUPF_R

Bit 3 - DTI Lockup Fault

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _DTLOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - DTI Lock Key

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_updown(&self) -> bool

Checks if the value of the field is UPDOWN

pub fn is_qdec(&self) -> bool

Checks if the value of the field is QDEC

impl R<u8, RISEA_A>

pub fn variant(&self) -> RISEA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, FALLA_A>

pub fn variant(&self) -> FALLA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, CLKSEL_A>

pub fn variant(&self) -> Variant<u8, CLKSEL_A>

Get enumerated values variant

pub fn is_preschfperclk(&self) -> bool

Checks if the value of the field is PRESCHFPERCLK

pub fn is_cc1(&self) -> bool

Checks if the value of the field is CC1

pub fn is_timerouf(&self) -> bool

Checks if the value of the field is TIMEROUF

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - Timer Mode

pub fn sync(&self) -> SYNC_R

Bit 3 - Timer Start/Stop/Reload Synchronization

pub fn osmen(&self) -> OSMEN_R

Bit 4 - One-shot Mode Enable

pub fn qdm(&self) -> QDM_R

Bit 5 - Quadrature Decoder Mode Selection

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 6 - Debug Mode Run Enable

pub fn dmaclract(&self) -> DMACLRACT_R

Bit 7 - DMA Request Clear on Active

pub fn risea(&self) -> RISEA_R

Bits 8:9 - Timer Rising Input Edge Action

pub fn falla(&self) -> FALLA_R

Bits 10:11 - Timer Falling Input Edge Action

pub fn x2cnt(&self) -> X2CNT_R

Bit 13 - 2x Count Mode

pub fn dissyncout(&self) -> DISSYNCOUT_R

Bit 14 - Disable Timer From Start/Stop/Reload Other Synchronized Timers

pub fn clksel(&self) -> CLKSEL_R

Bits 16:17 - Clock Source Select

pub fn presc(&self) -> PRESC_R

Bits 24:27 - Prescaler Setting

pub fn ati(&self) -> ATI_R

Bit 28 - Always Track Inputs

pub fn rsscoist(&self) -> RSSCOIST_R

Bit 29 - Reload-Start Sets Compare Output Initial State

impl R<u32, Reg<u32, _STATUS>>

pub fn running(&self) -> RUNNING_R

Bit 0 - Running

pub fn dir(&self) -> DIR_R

Bit 1 - Direction

pub fn topbv(&self) -> TOPBV_R

Bit 2 - TOPB Valid

pub fn ccvbv0(&self) -> CCVBV0_R

Bit 8 - CC0 CCVB Valid

pub fn ccvbv1(&self) -> CCVBV1_R

Bit 9 - CC1 CCVB Valid

pub fn ccvbv2(&self) -> CCVBV2_R

Bit 10 - CC2 CCVB Valid

pub fn ccvbv3(&self) -> CCVBV3_R

Bit 11 - CC3 CCVB Valid

pub fn icv0(&self) -> ICV0_R

Bit 16 - CC0 Input Capture Valid

pub fn icv1(&self) -> ICV1_R

Bit 17 - CC1 Input Capture Valid

pub fn icv2(&self) -> ICV2_R

Bit 18 - CC2 Input Capture Valid

pub fn icv3(&self) -> ICV3_R

Bit 19 - CC3 Input Capture Valid

pub fn ccpol0(&self) -> CCPOL0_R

Bit 24 - CC0 Polarity

pub fn ccpol1(&self) -> CCPOL1_R

Bit 25 - CC1 Polarity

pub fn ccpol2(&self) -> CCPOL2_R

Bit 26 - CC2 Polarity

pub fn ccpol3(&self) -> CCPOL3_R

Bit 27 - CC3 Polarity

impl R<u32, Reg<u32, _IF>>

pub fn of(&self) -> OF_R

Bit 0 - Overflow Interrupt Flag

pub fn uf(&self) -> UF_R

Bit 1 - Underflow Interrupt Flag

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - Direction Change Detect Interrupt Flag

pub fn cc0(&self) -> CC0_R

Bit 4 - CC Channel 0 Interrupt Flag

pub fn cc1(&self) -> CC1_R

Bit 5 - CC Channel 1 Interrupt Flag

pub fn cc2(&self) -> CC2_R

Bit 6 - CC Channel 2 Interrupt Flag

pub fn cc3(&self) -> CC3_R

Bit 7 - CC Channel 3 Interrupt Flag

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - CC Channel 0 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - CC Channel 1 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - CC Channel 2 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - CC Channel 3 Input Capture Buffer Overflow Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn of(&self) -> OF_R

Bit 0 - OF Interrupt Enable

pub fn uf(&self) -> UF_R

Bit 1 - UF Interrupt Enable

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - DIRCHG Interrupt Enable

pub fn cc0(&self) -> CC0_R

Bit 4 - CC0 Interrupt Enable

pub fn cc1(&self) -> CC1_R

Bit 5 - CC1 Interrupt Enable

pub fn cc2(&self) -> CC2_R

Bit 6 - CC2 Interrupt Enable

pub fn cc3(&self) -> CC3_R

Bit 7 - CC3 Interrupt Enable

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - ICBOF0 Interrupt Enable

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - ICBOF1 Interrupt Enable

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - ICBOF2 Interrupt Enable

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - ICBOF3 Interrupt Enable

impl R<u32, Reg<u32, _TOP>>

pub fn top(&self) -> TOP_R

Bits 0:31 - Counter Top Value

impl R<u32, Reg<u32, _TOPB>>

pub fn topb(&self) -> TOPB_R

Bits 0:31 - Counter Top Value Buffer

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:31 - Counter Value

impl R<u16, TIMERLOCKKEY_A>

pub fn variant(&self) -> Variant<u16, TIMERLOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn timerlockkey(&self) -> TIMERLOCKKEY_R

Bits 0:15 - Timer Lock Key

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn cc0pen(&self) -> CC0PEN_R

Bit 0 - CC Channel 0 Pin Enable

pub fn cc1pen(&self) -> CC1PEN_R

Bit 1 - CC Channel 1 Pin Enable

pub fn cc2pen(&self) -> CC2PEN_R

Bit 2 - CC Channel 2 Pin Enable

pub fn cc3pen(&self) -> CC3PEN_R

Bit 3 - CC Channel 3 Pin Enable

pub fn cdti0pen(&self) -> CDTI0PEN_R

Bit 8 - CC Channel 0 Complementary Dead-Time Insertion Pin Enable

pub fn cdti1pen(&self) -> CDTI1PEN_R

Bit 9 - CC Channel 1 Complementary Dead-Time Insertion Pin Enable

pub fn cdti2pen(&self) -> CDTI2PEN_R

Bit 10 - CC Channel 2 Complementary Dead-Time Insertion Pin Enable

impl R<u8, CC0LOC_A>

pub fn variant(&self) -> Variant<u8, CC0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC1LOC_A>

pub fn variant(&self) -> Variant<u8, CC1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC2LOC_A>

pub fn variant(&self) -> Variant<u8, CC2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC3LOC_A>

pub fn variant(&self) -> Variant<u8, CC3LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn cc0loc(&self) -> CC0LOC_R

Bits 0:5 - I/O Location

pub fn cc1loc(&self) -> CC1LOC_R

Bits 8:13 - I/O Location

pub fn cc2loc(&self) -> CC2LOC_R

Bits 16:21 - I/O Location

pub fn cc3loc(&self) -> CC3LOC_R

Bits 24:29 - I/O Location

impl R<u8, CDTI0LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI1LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI2LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u32, Reg<u32, _ROUTELOC2>>

pub fn cdti0loc(&self) -> CDTI0LOC_R

Bits 0:5 - I/O Location

pub fn cdti1loc(&self) -> CDTI1LOC_R

Bits 8:13 - I/O Location

pub fn cdti2loc(&self) -> CDTI2LOC_R

Bits 16:21 - I/O Location

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC0_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC0_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC0_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC0_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC1_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC1_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC1_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC1_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC2_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC2_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC2_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC2_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC3_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC3_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC3_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC3_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, DTPRSSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _DTCTRL>>

pub fn dten(&self) -> DTEN_R

Bit 0 - DTI Enable

pub fn dtdas(&self) -> DTDAS_R

Bit 1 - DTI Automatic Start-up Functionality

pub fn dtipol(&self) -> DTIPOL_R

Bit 2 - DTI Inactive Polarity

pub fn dtcinv(&self) -> DTCINV_R

Bit 3 - DTI Complementary Output Invert

pub fn dtprssel(&self) -> DTPRSSEL_R

Bits 4:8 - DTI PRS Source Channel Select

pub fn dtar(&self) -> DTAR_R

Bit 9 - DTI Always Run

pub fn dtfats(&self) -> DTFATS_R

Bit 10 - DTI Fault Action on Timer Stop

pub fn dtprsen(&self) -> DTPRSEN_R

Bit 24 - DTI PRS Source Enable

impl R<u8, DTPRESC_A>

pub fn variant(&self) -> Variant<u8, DTPRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _DTTIME>>

pub fn dtpresc(&self) -> DTPRESC_R

Bits 0:3 - DTI Prescaler Setting

pub fn dtriset(&self) -> DTRISET_R

Bits 8:13 - DTI Rise-time

pub fn dtfallt(&self) -> DTFALLT_R

Bits 16:21 - DTI Fall-time

impl R<u8, DTPRS0FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS0FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTPRS1FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS1FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTFA_A>

pub fn variant(&self) -> DTFA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_inactive(&self) -> bool

Checks if the value of the field is INACTIVE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_tristate(&self) -> bool

Checks if the value of the field is TRISTATE

impl R<u32, Reg<u32, _DTFC>>

pub fn dtprs0fsel(&self) -> DTPRS0FSEL_R

Bits 0:4 - DTI PRS Fault Source 0 Select

pub fn dtprs1fsel(&self) -> DTPRS1FSEL_R

Bits 8:12 - DTI PRS Fault Source 1 Select

pub fn dtfa(&self) -> DTFA_R

Bits 16:17 - DTI Fault Action

pub fn dtprs0fen(&self) -> DTPRS0FEN_R

Bit 24 - DTI PRS 0 Fault Enable

pub fn dtprs1fen(&self) -> DTPRS1FEN_R

Bit 25 - DTI PRS 1 Fault Enable

pub fn dtdbgfen(&self) -> DTDBGFEN_R

Bit 26 - DTI Debugger Fault Enable

pub fn dtlockupfen(&self) -> DTLOCKUPFEN_R

Bit 27 - DTI Lockup Fault Enable

impl R<u32, Reg<u32, _DTOGEN>>

pub fn dtogcc0en(&self) -> DTOGCC0EN_R

Bit 0 - DTI CC0 Output Generation Enable

pub fn dtogcc1en(&self) -> DTOGCC1EN_R

Bit 1 - DTI CC1 Output Generation Enable

pub fn dtogcc2en(&self) -> DTOGCC2EN_R

Bit 2 - DTI CC2 Output Generation Enable

pub fn dtogcdti0en(&self) -> DTOGCDTI0EN_R

Bit 3 - DTI CDTI0 Output Generation Enable

pub fn dtogcdti1en(&self) -> DTOGCDTI1EN_R

Bit 4 - DTI CDTI1 Output Generation Enable

pub fn dtogcdti2en(&self) -> DTOGCDTI2EN_R

Bit 5 - DTI CDTI2 Output Generation Enable

impl R<u32, Reg<u32, _DTFAULT>>

pub fn dtprs0f(&self) -> DTPRS0F_R

Bit 0 - DTI PRS 0 Fault

pub fn dtprs1f(&self) -> DTPRS1F_R

Bit 1 - DTI PRS 1 Fault

pub fn dtdbgf(&self) -> DTDBGF_R

Bit 2 - DTI Debugger Fault

pub fn dtlockupf(&self) -> DTLOCKUPF_R

Bit 3 - DTI Lockup Fault

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _DTLOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - DTI Lock Key

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_updown(&self) -> bool

Checks if the value of the field is UPDOWN

pub fn is_qdec(&self) -> bool

Checks if the value of the field is QDEC

impl R<u8, RISEA_A>

pub fn variant(&self) -> RISEA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, FALLA_A>

pub fn variant(&self) -> FALLA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, CLKSEL_A>

pub fn variant(&self) -> Variant<u8, CLKSEL_A>

Get enumerated values variant

pub fn is_preschfperclk(&self) -> bool

Checks if the value of the field is PRESCHFPERCLK

pub fn is_cc1(&self) -> bool

Checks if the value of the field is CC1

pub fn is_timerouf(&self) -> bool

Checks if the value of the field is TIMEROUF

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - Timer Mode

pub fn sync(&self) -> SYNC_R

Bit 3 - Timer Start/Stop/Reload Synchronization

pub fn osmen(&self) -> OSMEN_R

Bit 4 - One-shot Mode Enable

pub fn qdm(&self) -> QDM_R

Bit 5 - Quadrature Decoder Mode Selection

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 6 - Debug Mode Run Enable

pub fn dmaclract(&self) -> DMACLRACT_R

Bit 7 - DMA Request Clear on Active

pub fn risea(&self) -> RISEA_R

Bits 8:9 - Timer Rising Input Edge Action

pub fn falla(&self) -> FALLA_R

Bits 10:11 - Timer Falling Input Edge Action

pub fn x2cnt(&self) -> X2CNT_R

Bit 13 - 2x Count Mode

pub fn dissyncout(&self) -> DISSYNCOUT_R

Bit 14 - Disable Timer From Start/Stop/Reload Other Synchronized Timers

pub fn clksel(&self) -> CLKSEL_R

Bits 16:17 - Clock Source Select

pub fn presc(&self) -> PRESC_R

Bits 24:27 - Prescaler Setting

pub fn ati(&self) -> ATI_R

Bit 28 - Always Track Inputs

pub fn rsscoist(&self) -> RSSCOIST_R

Bit 29 - Reload-Start Sets Compare Output Initial State

impl R<u32, Reg<u32, _STATUS>>

pub fn running(&self) -> RUNNING_R

Bit 0 - Running

pub fn dir(&self) -> DIR_R

Bit 1 - Direction

pub fn topbv(&self) -> TOPBV_R

Bit 2 - TOPB Valid

pub fn ccvbv0(&self) -> CCVBV0_R

Bit 8 - CC0 CCVB Valid

pub fn ccvbv1(&self) -> CCVBV1_R

Bit 9 - CC1 CCVB Valid

pub fn ccvbv2(&self) -> CCVBV2_R

Bit 10 - CC2 CCVB Valid

pub fn ccvbv3(&self) -> CCVBV3_R

Bit 11 - CC3 CCVB Valid

pub fn icv0(&self) -> ICV0_R

Bit 16 - CC0 Input Capture Valid

pub fn icv1(&self) -> ICV1_R

Bit 17 - CC1 Input Capture Valid

pub fn icv2(&self) -> ICV2_R

Bit 18 - CC2 Input Capture Valid

pub fn icv3(&self) -> ICV3_R

Bit 19 - CC3 Input Capture Valid

pub fn ccpol0(&self) -> CCPOL0_R

Bit 24 - CC0 Polarity

pub fn ccpol1(&self) -> CCPOL1_R

Bit 25 - CC1 Polarity

pub fn ccpol2(&self) -> CCPOL2_R

Bit 26 - CC2 Polarity

pub fn ccpol3(&self) -> CCPOL3_R

Bit 27 - CC3 Polarity

impl R<u32, Reg<u32, _IF>>

pub fn of(&self) -> OF_R

Bit 0 - Overflow Interrupt Flag

pub fn uf(&self) -> UF_R

Bit 1 - Underflow Interrupt Flag

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - Direction Change Detect Interrupt Flag

pub fn cc0(&self) -> CC0_R

Bit 4 - CC Channel 0 Interrupt Flag

pub fn cc1(&self) -> CC1_R

Bit 5 - CC Channel 1 Interrupt Flag

pub fn cc2(&self) -> CC2_R

Bit 6 - CC Channel 2 Interrupt Flag

pub fn cc3(&self) -> CC3_R

Bit 7 - CC Channel 3 Interrupt Flag

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - CC Channel 0 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - CC Channel 1 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - CC Channel 2 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - CC Channel 3 Input Capture Buffer Overflow Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn of(&self) -> OF_R

Bit 0 - OF Interrupt Enable

pub fn uf(&self) -> UF_R

Bit 1 - UF Interrupt Enable

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - DIRCHG Interrupt Enable

pub fn cc0(&self) -> CC0_R

Bit 4 - CC0 Interrupt Enable

pub fn cc1(&self) -> CC1_R

Bit 5 - CC1 Interrupt Enable

pub fn cc2(&self) -> CC2_R

Bit 6 - CC2 Interrupt Enable

pub fn cc3(&self) -> CC3_R

Bit 7 - CC3 Interrupt Enable

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - ICBOF0 Interrupt Enable

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - ICBOF1 Interrupt Enable

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - ICBOF2 Interrupt Enable

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - ICBOF3 Interrupt Enable

impl R<u32, Reg<u32, _TOP>>

pub fn top(&self) -> TOP_R

Bits 0:31 - Counter Top Value

impl R<u32, Reg<u32, _TOPB>>

pub fn topb(&self) -> TOPB_R

Bits 0:31 - Counter Top Value Buffer

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:31 - Counter Value

impl R<u16, TIMERLOCKKEY_A>

pub fn variant(&self) -> Variant<u16, TIMERLOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn timerlockkey(&self) -> TIMERLOCKKEY_R

Bits 0:15 - Timer Lock Key

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn cc0pen(&self) -> CC0PEN_R

Bit 0 - CC Channel 0 Pin Enable

pub fn cc1pen(&self) -> CC1PEN_R

Bit 1 - CC Channel 1 Pin Enable

pub fn cc2pen(&self) -> CC2PEN_R

Bit 2 - CC Channel 2 Pin Enable

pub fn cc3pen(&self) -> CC3PEN_R

Bit 3 - CC Channel 3 Pin Enable

pub fn cdti0pen(&self) -> CDTI0PEN_R

Bit 8 - CC Channel 0 Complementary Dead-Time Insertion Pin Enable

pub fn cdti1pen(&self) -> CDTI1PEN_R

Bit 9 - CC Channel 1 Complementary Dead-Time Insertion Pin Enable

pub fn cdti2pen(&self) -> CDTI2PEN_R

Bit 10 - CC Channel 2 Complementary Dead-Time Insertion Pin Enable

impl R<u8, CC0LOC_A>

pub fn variant(&self) -> Variant<u8, CC0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC1LOC_A>

pub fn variant(&self) -> Variant<u8, CC1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC2LOC_A>

pub fn variant(&self) -> Variant<u8, CC2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC3LOC_A>

pub fn variant(&self) -> Variant<u8, CC3LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn cc0loc(&self) -> CC0LOC_R

Bits 0:5 - I/O Location

pub fn cc1loc(&self) -> CC1LOC_R

Bits 8:13 - I/O Location

pub fn cc2loc(&self) -> CC2LOC_R

Bits 16:21 - I/O Location

pub fn cc3loc(&self) -> CC3LOC_R

Bits 24:29 - I/O Location

impl R<u8, CDTI0LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI1LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI2LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u32, Reg<u32, _ROUTELOC2>>

pub fn cdti0loc(&self) -> CDTI0LOC_R

Bits 0:5 - I/O Location

pub fn cdti1loc(&self) -> CDTI1LOC_R

Bits 8:13 - I/O Location

pub fn cdti2loc(&self) -> CDTI2LOC_R

Bits 16:21 - I/O Location

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC0_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC0_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC0_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC0_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC1_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC1_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC1_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC1_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC2_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC2_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC2_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC2_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC3_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC3_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC3_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC3_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, DTPRSSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _DTCTRL>>

pub fn dten(&self) -> DTEN_R

Bit 0 - DTI Enable

pub fn dtdas(&self) -> DTDAS_R

Bit 1 - DTI Automatic Start-up Functionality

pub fn dtipol(&self) -> DTIPOL_R

Bit 2 - DTI Inactive Polarity

pub fn dtcinv(&self) -> DTCINV_R

Bit 3 - DTI Complementary Output Invert

pub fn dtprssel(&self) -> DTPRSSEL_R

Bits 4:8 - DTI PRS Source Channel Select

pub fn dtar(&self) -> DTAR_R

Bit 9 - DTI Always Run

pub fn dtfats(&self) -> DTFATS_R

Bit 10 - DTI Fault Action on Timer Stop

pub fn dtprsen(&self) -> DTPRSEN_R

Bit 24 - DTI PRS Source Enable

impl R<u8, DTPRESC_A>

pub fn variant(&self) -> Variant<u8, DTPRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _DTTIME>>

pub fn dtpresc(&self) -> DTPRESC_R

Bits 0:3 - DTI Prescaler Setting

pub fn dtriset(&self) -> DTRISET_R

Bits 8:13 - DTI Rise-time

pub fn dtfallt(&self) -> DTFALLT_R

Bits 16:21 - DTI Fall-time

impl R<u8, DTPRS0FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS0FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTPRS1FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS1FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTFA_A>

pub fn variant(&self) -> DTFA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_inactive(&self) -> bool

Checks if the value of the field is INACTIVE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_tristate(&self) -> bool

Checks if the value of the field is TRISTATE

impl R<u32, Reg<u32, _DTFC>>

pub fn dtprs0fsel(&self) -> DTPRS0FSEL_R

Bits 0:4 - DTI PRS Fault Source 0 Select

pub fn dtprs1fsel(&self) -> DTPRS1FSEL_R

Bits 8:12 - DTI PRS Fault Source 1 Select

pub fn dtfa(&self) -> DTFA_R

Bits 16:17 - DTI Fault Action

pub fn dtprs0fen(&self) -> DTPRS0FEN_R

Bit 24 - DTI PRS 0 Fault Enable

pub fn dtprs1fen(&self) -> DTPRS1FEN_R

Bit 25 - DTI PRS 1 Fault Enable

pub fn dtdbgfen(&self) -> DTDBGFEN_R

Bit 26 - DTI Debugger Fault Enable

pub fn dtlockupfen(&self) -> DTLOCKUPFEN_R

Bit 27 - DTI Lockup Fault Enable

impl R<u32, Reg<u32, _DTOGEN>>

pub fn dtogcc0en(&self) -> DTOGCC0EN_R

Bit 0 - DTI CC0 Output Generation Enable

pub fn dtogcc1en(&self) -> DTOGCC1EN_R

Bit 1 - DTI CC1 Output Generation Enable

pub fn dtogcc2en(&self) -> DTOGCC2EN_R

Bit 2 - DTI CC2 Output Generation Enable

pub fn dtogcdti0en(&self) -> DTOGCDTI0EN_R

Bit 3 - DTI CDTI0 Output Generation Enable

pub fn dtogcdti1en(&self) -> DTOGCDTI1EN_R

Bit 4 - DTI CDTI1 Output Generation Enable

pub fn dtogcdti2en(&self) -> DTOGCDTI2EN_R

Bit 5 - DTI CDTI2 Output Generation Enable

impl R<u32, Reg<u32, _DTFAULT>>

pub fn dtprs0f(&self) -> DTPRS0F_R

Bit 0 - DTI PRS 0 Fault

pub fn dtprs1f(&self) -> DTPRS1F_R

Bit 1 - DTI PRS 1 Fault

pub fn dtdbgf(&self) -> DTDBGF_R

Bit 2 - DTI Debugger Fault

pub fn dtlockupf(&self) -> DTLOCKUPF_R

Bit 3 - DTI Lockup Fault

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _DTLOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - DTI Lock Key

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_updown(&self) -> bool

Checks if the value of the field is UPDOWN

pub fn is_qdec(&self) -> bool

Checks if the value of the field is QDEC

impl R<u8, RISEA_A>

pub fn variant(&self) -> RISEA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, FALLA_A>

pub fn variant(&self) -> FALLA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, CLKSEL_A>

pub fn variant(&self) -> Variant<u8, CLKSEL_A>

Get enumerated values variant

pub fn is_preschfperclk(&self) -> bool

Checks if the value of the field is PRESCHFPERCLK

pub fn is_cc1(&self) -> bool

Checks if the value of the field is CC1

pub fn is_timerouf(&self) -> bool

Checks if the value of the field is TIMEROUF

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - Timer Mode

pub fn sync(&self) -> SYNC_R

Bit 3 - Timer Start/Stop/Reload Synchronization

pub fn osmen(&self) -> OSMEN_R

Bit 4 - One-shot Mode Enable

pub fn qdm(&self) -> QDM_R

Bit 5 - Quadrature Decoder Mode Selection

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 6 - Debug Mode Run Enable

pub fn dmaclract(&self) -> DMACLRACT_R

Bit 7 - DMA Request Clear on Active

pub fn risea(&self) -> RISEA_R

Bits 8:9 - Timer Rising Input Edge Action

pub fn falla(&self) -> FALLA_R

Bits 10:11 - Timer Falling Input Edge Action

pub fn x2cnt(&self) -> X2CNT_R

Bit 13 - 2x Count Mode

pub fn dissyncout(&self) -> DISSYNCOUT_R

Bit 14 - Disable Timer From Start/Stop/Reload Other Synchronized Timers

pub fn clksel(&self) -> CLKSEL_R

Bits 16:17 - Clock Source Select

pub fn presc(&self) -> PRESC_R

Bits 24:27 - Prescaler Setting

pub fn ati(&self) -> ATI_R

Bit 28 - Always Track Inputs

pub fn rsscoist(&self) -> RSSCOIST_R

Bit 29 - Reload-Start Sets Compare Output Initial State

impl R<u32, Reg<u32, _STATUS>>

pub fn running(&self) -> RUNNING_R

Bit 0 - Running

pub fn dir(&self) -> DIR_R

Bit 1 - Direction

pub fn topbv(&self) -> TOPBV_R

Bit 2 - TOPB Valid

pub fn ccvbv0(&self) -> CCVBV0_R

Bit 8 - CC0 CCVB Valid

pub fn ccvbv1(&self) -> CCVBV1_R

Bit 9 - CC1 CCVB Valid

pub fn ccvbv2(&self) -> CCVBV2_R

Bit 10 - CC2 CCVB Valid

pub fn ccvbv3(&self) -> CCVBV3_R

Bit 11 - CC3 CCVB Valid

pub fn icv0(&self) -> ICV0_R

Bit 16 - CC0 Input Capture Valid

pub fn icv1(&self) -> ICV1_R

Bit 17 - CC1 Input Capture Valid

pub fn icv2(&self) -> ICV2_R

Bit 18 - CC2 Input Capture Valid

pub fn icv3(&self) -> ICV3_R

Bit 19 - CC3 Input Capture Valid

pub fn ccpol0(&self) -> CCPOL0_R

Bit 24 - CC0 Polarity

pub fn ccpol1(&self) -> CCPOL1_R

Bit 25 - CC1 Polarity

pub fn ccpol2(&self) -> CCPOL2_R

Bit 26 - CC2 Polarity

pub fn ccpol3(&self) -> CCPOL3_R

Bit 27 - CC3 Polarity

impl R<u32, Reg<u32, _IF>>

pub fn of(&self) -> OF_R

Bit 0 - Overflow Interrupt Flag

pub fn uf(&self) -> UF_R

Bit 1 - Underflow Interrupt Flag

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - Direction Change Detect Interrupt Flag

pub fn cc0(&self) -> CC0_R

Bit 4 - CC Channel 0 Interrupt Flag

pub fn cc1(&self) -> CC1_R

Bit 5 - CC Channel 1 Interrupt Flag

pub fn cc2(&self) -> CC2_R

Bit 6 - CC Channel 2 Interrupt Flag

pub fn cc3(&self) -> CC3_R

Bit 7 - CC Channel 3 Interrupt Flag

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - CC Channel 0 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - CC Channel 1 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - CC Channel 2 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - CC Channel 3 Input Capture Buffer Overflow Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn of(&self) -> OF_R

Bit 0 - OF Interrupt Enable

pub fn uf(&self) -> UF_R

Bit 1 - UF Interrupt Enable

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - DIRCHG Interrupt Enable

pub fn cc0(&self) -> CC0_R

Bit 4 - CC0 Interrupt Enable

pub fn cc1(&self) -> CC1_R

Bit 5 - CC1 Interrupt Enable

pub fn cc2(&self) -> CC2_R

Bit 6 - CC2 Interrupt Enable

pub fn cc3(&self) -> CC3_R

Bit 7 - CC3 Interrupt Enable

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - ICBOF0 Interrupt Enable

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - ICBOF1 Interrupt Enable

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - ICBOF2 Interrupt Enable

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - ICBOF3 Interrupt Enable

impl R<u32, Reg<u32, _TOP>>

pub fn top(&self) -> TOP_R

Bits 0:31 - Counter Top Value

impl R<u32, Reg<u32, _TOPB>>

pub fn topb(&self) -> TOPB_R

Bits 0:31 - Counter Top Value Buffer

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:31 - Counter Value

impl R<u16, TIMERLOCKKEY_A>

pub fn variant(&self) -> Variant<u16, TIMERLOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn timerlockkey(&self) -> TIMERLOCKKEY_R

Bits 0:15 - Timer Lock Key

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn cc0pen(&self) -> CC0PEN_R

Bit 0 - CC Channel 0 Pin Enable

pub fn cc1pen(&self) -> CC1PEN_R

Bit 1 - CC Channel 1 Pin Enable

pub fn cc2pen(&self) -> CC2PEN_R

Bit 2 - CC Channel 2 Pin Enable

pub fn cc3pen(&self) -> CC3PEN_R

Bit 3 - CC Channel 3 Pin Enable

pub fn cdti0pen(&self) -> CDTI0PEN_R

Bit 8 - CC Channel 0 Complementary Dead-Time Insertion Pin Enable

pub fn cdti1pen(&self) -> CDTI1PEN_R

Bit 9 - CC Channel 1 Complementary Dead-Time Insertion Pin Enable

pub fn cdti2pen(&self) -> CDTI2PEN_R

Bit 10 - CC Channel 2 Complementary Dead-Time Insertion Pin Enable

impl R<u8, CC0LOC_A>

pub fn variant(&self) -> Variant<u8, CC0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC1LOC_A>

pub fn variant(&self) -> Variant<u8, CC1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC2LOC_A>

pub fn variant(&self) -> Variant<u8, CC2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC3LOC_A>

pub fn variant(&self) -> Variant<u8, CC3LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn cc0loc(&self) -> CC0LOC_R

Bits 0:5 - I/O Location

pub fn cc1loc(&self) -> CC1LOC_R

Bits 8:13 - I/O Location

pub fn cc2loc(&self) -> CC2LOC_R

Bits 16:21 - I/O Location

pub fn cc3loc(&self) -> CC3LOC_R

Bits 24:29 - I/O Location

impl R<u8, CDTI0LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI1LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI2LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u32, Reg<u32, _ROUTELOC2>>

pub fn cdti0loc(&self) -> CDTI0LOC_R

Bits 0:5 - I/O Location

pub fn cdti1loc(&self) -> CDTI1LOC_R

Bits 8:13 - I/O Location

pub fn cdti2loc(&self) -> CDTI2LOC_R

Bits 16:21 - I/O Location

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC0_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC0_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC0_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC0_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC1_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC1_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC1_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC1_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC2_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC2_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC2_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC2_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC3_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC3_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC3_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC3_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, DTPRSSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _DTCTRL>>

pub fn dten(&self) -> DTEN_R

Bit 0 - DTI Enable

pub fn dtdas(&self) -> DTDAS_R

Bit 1 - DTI Automatic Start-up Functionality

pub fn dtipol(&self) -> DTIPOL_R

Bit 2 - DTI Inactive Polarity

pub fn dtcinv(&self) -> DTCINV_R

Bit 3 - DTI Complementary Output Invert

pub fn dtprssel(&self) -> DTPRSSEL_R

Bits 4:8 - DTI PRS Source Channel Select

pub fn dtar(&self) -> DTAR_R

Bit 9 - DTI Always Run

pub fn dtfats(&self) -> DTFATS_R

Bit 10 - DTI Fault Action on Timer Stop

pub fn dtprsen(&self) -> DTPRSEN_R

Bit 24 - DTI PRS Source Enable

impl R<u8, DTPRESC_A>

pub fn variant(&self) -> Variant<u8, DTPRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _DTTIME>>

pub fn dtpresc(&self) -> DTPRESC_R

Bits 0:3 - DTI Prescaler Setting

pub fn dtriset(&self) -> DTRISET_R

Bits 8:13 - DTI Rise-time

pub fn dtfallt(&self) -> DTFALLT_R

Bits 16:21 - DTI Fall-time

impl R<u8, DTPRS0FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS0FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTPRS1FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS1FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTFA_A>

pub fn variant(&self) -> DTFA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_inactive(&self) -> bool

Checks if the value of the field is INACTIVE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_tristate(&self) -> bool

Checks if the value of the field is TRISTATE

impl R<u32, Reg<u32, _DTFC>>

pub fn dtprs0fsel(&self) -> DTPRS0FSEL_R

Bits 0:4 - DTI PRS Fault Source 0 Select

pub fn dtprs1fsel(&self) -> DTPRS1FSEL_R

Bits 8:12 - DTI PRS Fault Source 1 Select

pub fn dtfa(&self) -> DTFA_R

Bits 16:17 - DTI Fault Action

pub fn dtprs0fen(&self) -> DTPRS0FEN_R

Bit 24 - DTI PRS 0 Fault Enable

pub fn dtprs1fen(&self) -> DTPRS1FEN_R

Bit 25 - DTI PRS 1 Fault Enable

pub fn dtdbgfen(&self) -> DTDBGFEN_R

Bit 26 - DTI Debugger Fault Enable

pub fn dtlockupfen(&self) -> DTLOCKUPFEN_R

Bit 27 - DTI Lockup Fault Enable

impl R<u32, Reg<u32, _DTOGEN>>

pub fn dtogcc0en(&self) -> DTOGCC0EN_R

Bit 0 - DTI CC0 Output Generation Enable

pub fn dtogcc1en(&self) -> DTOGCC1EN_R

Bit 1 - DTI CC1 Output Generation Enable

pub fn dtogcc2en(&self) -> DTOGCC2EN_R

Bit 2 - DTI CC2 Output Generation Enable

pub fn dtogcdti0en(&self) -> DTOGCDTI0EN_R

Bit 3 - DTI CDTI0 Output Generation Enable

pub fn dtogcdti1en(&self) -> DTOGCDTI1EN_R

Bit 4 - DTI CDTI1 Output Generation Enable

pub fn dtogcdti2en(&self) -> DTOGCDTI2EN_R

Bit 5 - DTI CDTI2 Output Generation Enable

impl R<u32, Reg<u32, _DTFAULT>>

pub fn dtprs0f(&self) -> DTPRS0F_R

Bit 0 - DTI PRS 0 Fault

pub fn dtprs1f(&self) -> DTPRS1F_R

Bit 1 - DTI PRS 1 Fault

pub fn dtdbgf(&self) -> DTDBGF_R

Bit 2 - DTI Debugger Fault

pub fn dtlockupf(&self) -> DTLOCKUPF_R

Bit 3 - DTI Lockup Fault

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _DTLOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - DTI Lock Key

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_updown(&self) -> bool

Checks if the value of the field is UPDOWN

pub fn is_qdec(&self) -> bool

Checks if the value of the field is QDEC

impl R<u8, RISEA_A>

pub fn variant(&self) -> RISEA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, FALLA_A>

pub fn variant(&self) -> FALLA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, CLKSEL_A>

pub fn variant(&self) -> Variant<u8, CLKSEL_A>

Get enumerated values variant

pub fn is_preschfperclk(&self) -> bool

Checks if the value of the field is PRESCHFPERCLK

pub fn is_cc1(&self) -> bool

Checks if the value of the field is CC1

pub fn is_timerouf(&self) -> bool

Checks if the value of the field is TIMEROUF

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - Timer Mode

pub fn sync(&self) -> SYNC_R

Bit 3 - Timer Start/Stop/Reload Synchronization

pub fn osmen(&self) -> OSMEN_R

Bit 4 - One-shot Mode Enable

pub fn qdm(&self) -> QDM_R

Bit 5 - Quadrature Decoder Mode Selection

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 6 - Debug Mode Run Enable

pub fn dmaclract(&self) -> DMACLRACT_R

Bit 7 - DMA Request Clear on Active

pub fn risea(&self) -> RISEA_R

Bits 8:9 - Timer Rising Input Edge Action

pub fn falla(&self) -> FALLA_R

Bits 10:11 - Timer Falling Input Edge Action

pub fn x2cnt(&self) -> X2CNT_R

Bit 13 - 2x Count Mode

pub fn dissyncout(&self) -> DISSYNCOUT_R

Bit 14 - Disable Timer From Start/Stop/Reload Other Synchronized Timers

pub fn clksel(&self) -> CLKSEL_R

Bits 16:17 - Clock Source Select

pub fn presc(&self) -> PRESC_R

Bits 24:27 - Prescaler Setting

pub fn ati(&self) -> ATI_R

Bit 28 - Always Track Inputs

pub fn rsscoist(&self) -> RSSCOIST_R

Bit 29 - Reload-Start Sets Compare Output Initial State

impl R<u32, Reg<u32, _STATUS>>

pub fn running(&self) -> RUNNING_R

Bit 0 - Running

pub fn dir(&self) -> DIR_R

Bit 1 - Direction

pub fn topbv(&self) -> TOPBV_R

Bit 2 - TOPB Valid

pub fn ccvbv0(&self) -> CCVBV0_R

Bit 8 - CC0 CCVB Valid

pub fn ccvbv1(&self) -> CCVBV1_R

Bit 9 - CC1 CCVB Valid

pub fn ccvbv2(&self) -> CCVBV2_R

Bit 10 - CC2 CCVB Valid

pub fn ccvbv3(&self) -> CCVBV3_R

Bit 11 - CC3 CCVB Valid

pub fn icv0(&self) -> ICV0_R

Bit 16 - CC0 Input Capture Valid

pub fn icv1(&self) -> ICV1_R

Bit 17 - CC1 Input Capture Valid

pub fn icv2(&self) -> ICV2_R

Bit 18 - CC2 Input Capture Valid

pub fn icv3(&self) -> ICV3_R

Bit 19 - CC3 Input Capture Valid

pub fn ccpol0(&self) -> CCPOL0_R

Bit 24 - CC0 Polarity

pub fn ccpol1(&self) -> CCPOL1_R

Bit 25 - CC1 Polarity

pub fn ccpol2(&self) -> CCPOL2_R

Bit 26 - CC2 Polarity

pub fn ccpol3(&self) -> CCPOL3_R

Bit 27 - CC3 Polarity

impl R<u32, Reg<u32, _IF>>

pub fn of(&self) -> OF_R

Bit 0 - Overflow Interrupt Flag

pub fn uf(&self) -> UF_R

Bit 1 - Underflow Interrupt Flag

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - Direction Change Detect Interrupt Flag

pub fn cc0(&self) -> CC0_R

Bit 4 - CC Channel 0 Interrupt Flag

pub fn cc1(&self) -> CC1_R

Bit 5 - CC Channel 1 Interrupt Flag

pub fn cc2(&self) -> CC2_R

Bit 6 - CC Channel 2 Interrupt Flag

pub fn cc3(&self) -> CC3_R

Bit 7 - CC Channel 3 Interrupt Flag

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - CC Channel 0 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - CC Channel 1 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - CC Channel 2 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - CC Channel 3 Input Capture Buffer Overflow Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn of(&self) -> OF_R

Bit 0 - OF Interrupt Enable

pub fn uf(&self) -> UF_R

Bit 1 - UF Interrupt Enable

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - DIRCHG Interrupt Enable

pub fn cc0(&self) -> CC0_R

Bit 4 - CC0 Interrupt Enable

pub fn cc1(&self) -> CC1_R

Bit 5 - CC1 Interrupt Enable

pub fn cc2(&self) -> CC2_R

Bit 6 - CC2 Interrupt Enable

pub fn cc3(&self) -> CC3_R

Bit 7 - CC3 Interrupt Enable

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - ICBOF0 Interrupt Enable

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - ICBOF1 Interrupt Enable

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - ICBOF2 Interrupt Enable

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - ICBOF3 Interrupt Enable

impl R<u32, Reg<u32, _TOP>>

pub fn top(&self) -> TOP_R

Bits 0:31 - Counter Top Value

impl R<u32, Reg<u32, _TOPB>>

pub fn topb(&self) -> TOPB_R

Bits 0:31 - Counter Top Value Buffer

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:31 - Counter Value

impl R<u16, TIMERLOCKKEY_A>

pub fn variant(&self) -> Variant<u16, TIMERLOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn timerlockkey(&self) -> TIMERLOCKKEY_R

Bits 0:15 - Timer Lock Key

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn cc0pen(&self) -> CC0PEN_R

Bit 0 - CC Channel 0 Pin Enable

pub fn cc1pen(&self) -> CC1PEN_R

Bit 1 - CC Channel 1 Pin Enable

pub fn cc2pen(&self) -> CC2PEN_R

Bit 2 - CC Channel 2 Pin Enable

pub fn cc3pen(&self) -> CC3PEN_R

Bit 3 - CC Channel 3 Pin Enable

pub fn cdti0pen(&self) -> CDTI0PEN_R

Bit 8 - CC Channel 0 Complementary Dead-Time Insertion Pin Enable

pub fn cdti1pen(&self) -> CDTI1PEN_R

Bit 9 - CC Channel 1 Complementary Dead-Time Insertion Pin Enable

pub fn cdti2pen(&self) -> CDTI2PEN_R

Bit 10 - CC Channel 2 Complementary Dead-Time Insertion Pin Enable

impl R<u8, CC0LOC_A>

pub fn variant(&self) -> Variant<u8, CC0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC1LOC_A>

pub fn variant(&self) -> Variant<u8, CC1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC2LOC_A>

pub fn variant(&self) -> Variant<u8, CC2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC3LOC_A>

pub fn variant(&self) -> Variant<u8, CC3LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn cc0loc(&self) -> CC0LOC_R

Bits 0:5 - I/O Location

pub fn cc1loc(&self) -> CC1LOC_R

Bits 8:13 - I/O Location

pub fn cc2loc(&self) -> CC2LOC_R

Bits 16:21 - I/O Location

pub fn cc3loc(&self) -> CC3LOC_R

Bits 24:29 - I/O Location

impl R<u8, CDTI0LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI1LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI2LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u32, Reg<u32, _ROUTELOC2>>

pub fn cdti0loc(&self) -> CDTI0LOC_R

Bits 0:5 - I/O Location

pub fn cdti1loc(&self) -> CDTI1LOC_R

Bits 8:13 - I/O Location

pub fn cdti2loc(&self) -> CDTI2LOC_R

Bits 16:21 - I/O Location

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC0_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC0_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC0_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC0_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC1_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC1_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC1_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC1_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC2_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC2_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC2_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC2_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC3_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC3_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC3_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC3_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, DTPRSSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _DTCTRL>>

pub fn dten(&self) -> DTEN_R

Bit 0 - DTI Enable

pub fn dtdas(&self) -> DTDAS_R

Bit 1 - DTI Automatic Start-up Functionality

pub fn dtipol(&self) -> DTIPOL_R

Bit 2 - DTI Inactive Polarity

pub fn dtcinv(&self) -> DTCINV_R

Bit 3 - DTI Complementary Output Invert

pub fn dtprssel(&self) -> DTPRSSEL_R

Bits 4:8 - DTI PRS Source Channel Select

pub fn dtar(&self) -> DTAR_R

Bit 9 - DTI Always Run

pub fn dtfats(&self) -> DTFATS_R

Bit 10 - DTI Fault Action on Timer Stop

pub fn dtprsen(&self) -> DTPRSEN_R

Bit 24 - DTI PRS Source Enable

impl R<u8, DTPRESC_A>

pub fn variant(&self) -> Variant<u8, DTPRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _DTTIME>>

pub fn dtpresc(&self) -> DTPRESC_R

Bits 0:3 - DTI Prescaler Setting

pub fn dtriset(&self) -> DTRISET_R

Bits 8:13 - DTI Rise-time

pub fn dtfallt(&self) -> DTFALLT_R

Bits 16:21 - DTI Fall-time

impl R<u8, DTPRS0FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS0FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTPRS1FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS1FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTFA_A>

pub fn variant(&self) -> DTFA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_inactive(&self) -> bool

Checks if the value of the field is INACTIVE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_tristate(&self) -> bool

Checks if the value of the field is TRISTATE

impl R<u32, Reg<u32, _DTFC>>

pub fn dtprs0fsel(&self) -> DTPRS0FSEL_R

Bits 0:4 - DTI PRS Fault Source 0 Select

pub fn dtprs1fsel(&self) -> DTPRS1FSEL_R

Bits 8:12 - DTI PRS Fault Source 1 Select

pub fn dtfa(&self) -> DTFA_R

Bits 16:17 - DTI Fault Action

pub fn dtprs0fen(&self) -> DTPRS0FEN_R

Bit 24 - DTI PRS 0 Fault Enable

pub fn dtprs1fen(&self) -> DTPRS1FEN_R

Bit 25 - DTI PRS 1 Fault Enable

pub fn dtdbgfen(&self) -> DTDBGFEN_R

Bit 26 - DTI Debugger Fault Enable

pub fn dtlockupfen(&self) -> DTLOCKUPFEN_R

Bit 27 - DTI Lockup Fault Enable

impl R<u32, Reg<u32, _DTOGEN>>

pub fn dtogcc0en(&self) -> DTOGCC0EN_R

Bit 0 - DTI CC0 Output Generation Enable

pub fn dtogcc1en(&self) -> DTOGCC1EN_R

Bit 1 - DTI CC1 Output Generation Enable

pub fn dtogcc2en(&self) -> DTOGCC2EN_R

Bit 2 - DTI CC2 Output Generation Enable

pub fn dtogcdti0en(&self) -> DTOGCDTI0EN_R

Bit 3 - DTI CDTI0 Output Generation Enable

pub fn dtogcdti1en(&self) -> DTOGCDTI1EN_R

Bit 4 - DTI CDTI1 Output Generation Enable

pub fn dtogcdti2en(&self) -> DTOGCDTI2EN_R

Bit 5 - DTI CDTI2 Output Generation Enable

impl R<u32, Reg<u32, _DTFAULT>>

pub fn dtprs0f(&self) -> DTPRS0F_R

Bit 0 - DTI PRS 0 Fault

pub fn dtprs1f(&self) -> DTPRS1F_R

Bit 1 - DTI PRS 1 Fault

pub fn dtdbgf(&self) -> DTDBGF_R

Bit 2 - DTI Debugger Fault

pub fn dtlockupf(&self) -> DTLOCKUPF_R

Bit 3 - DTI Lockup Fault

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _DTLOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - DTI Lock Key

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_updown(&self) -> bool

Checks if the value of the field is UPDOWN

pub fn is_qdec(&self) -> bool

Checks if the value of the field is QDEC

impl R<u8, RISEA_A>

pub fn variant(&self) -> RISEA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, FALLA_A>

pub fn variant(&self) -> FALLA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, CLKSEL_A>

pub fn variant(&self) -> Variant<u8, CLKSEL_A>

Get enumerated values variant

pub fn is_preschfperclk(&self) -> bool

Checks if the value of the field is PRESCHFPERCLK

pub fn is_cc1(&self) -> bool

Checks if the value of the field is CC1

pub fn is_timerouf(&self) -> bool

Checks if the value of the field is TIMEROUF

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - Timer Mode

pub fn sync(&self) -> SYNC_R

Bit 3 - Timer Start/Stop/Reload Synchronization

pub fn osmen(&self) -> OSMEN_R

Bit 4 - One-shot Mode Enable

pub fn qdm(&self) -> QDM_R

Bit 5 - Quadrature Decoder Mode Selection

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 6 - Debug Mode Run Enable

pub fn dmaclract(&self) -> DMACLRACT_R

Bit 7 - DMA Request Clear on Active

pub fn risea(&self) -> RISEA_R

Bits 8:9 - Timer Rising Input Edge Action

pub fn falla(&self) -> FALLA_R

Bits 10:11 - Timer Falling Input Edge Action

pub fn x2cnt(&self) -> X2CNT_R

Bit 13 - 2x Count Mode

pub fn dissyncout(&self) -> DISSYNCOUT_R

Bit 14 - Disable Timer From Start/Stop/Reload Other Synchronized Timers

pub fn clksel(&self) -> CLKSEL_R

Bits 16:17 - Clock Source Select

pub fn presc(&self) -> PRESC_R

Bits 24:27 - Prescaler Setting

pub fn ati(&self) -> ATI_R

Bit 28 - Always Track Inputs

pub fn rsscoist(&self) -> RSSCOIST_R

Bit 29 - Reload-Start Sets Compare Output Initial State

impl R<u32, Reg<u32, _STATUS>>

pub fn running(&self) -> RUNNING_R

Bit 0 - Running

pub fn dir(&self) -> DIR_R

Bit 1 - Direction

pub fn topbv(&self) -> TOPBV_R

Bit 2 - TOPB Valid

pub fn ccvbv0(&self) -> CCVBV0_R

Bit 8 - CC0 CCVB Valid

pub fn ccvbv1(&self) -> CCVBV1_R

Bit 9 - CC1 CCVB Valid

pub fn ccvbv2(&self) -> CCVBV2_R

Bit 10 - CC2 CCVB Valid

pub fn ccvbv3(&self) -> CCVBV3_R

Bit 11 - CC3 CCVB Valid

pub fn icv0(&self) -> ICV0_R

Bit 16 - CC0 Input Capture Valid

pub fn icv1(&self) -> ICV1_R

Bit 17 - CC1 Input Capture Valid

pub fn icv2(&self) -> ICV2_R

Bit 18 - CC2 Input Capture Valid

pub fn icv3(&self) -> ICV3_R

Bit 19 - CC3 Input Capture Valid

pub fn ccpol0(&self) -> CCPOL0_R

Bit 24 - CC0 Polarity

pub fn ccpol1(&self) -> CCPOL1_R

Bit 25 - CC1 Polarity

pub fn ccpol2(&self) -> CCPOL2_R

Bit 26 - CC2 Polarity

pub fn ccpol3(&self) -> CCPOL3_R

Bit 27 - CC3 Polarity

impl R<u32, Reg<u32, _IF>>

pub fn of(&self) -> OF_R

Bit 0 - Overflow Interrupt Flag

pub fn uf(&self) -> UF_R

Bit 1 - Underflow Interrupt Flag

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - Direction Change Detect Interrupt Flag

pub fn cc0(&self) -> CC0_R

Bit 4 - CC Channel 0 Interrupt Flag

pub fn cc1(&self) -> CC1_R

Bit 5 - CC Channel 1 Interrupt Flag

pub fn cc2(&self) -> CC2_R

Bit 6 - CC Channel 2 Interrupt Flag

pub fn cc3(&self) -> CC3_R

Bit 7 - CC Channel 3 Interrupt Flag

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - CC Channel 0 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - CC Channel 1 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - CC Channel 2 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - CC Channel 3 Input Capture Buffer Overflow Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn of(&self) -> OF_R

Bit 0 - OF Interrupt Enable

pub fn uf(&self) -> UF_R

Bit 1 - UF Interrupt Enable

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - DIRCHG Interrupt Enable

pub fn cc0(&self) -> CC0_R

Bit 4 - CC0 Interrupt Enable

pub fn cc1(&self) -> CC1_R

Bit 5 - CC1 Interrupt Enable

pub fn cc2(&self) -> CC2_R

Bit 6 - CC2 Interrupt Enable

pub fn cc3(&self) -> CC3_R

Bit 7 - CC3 Interrupt Enable

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - ICBOF0 Interrupt Enable

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - ICBOF1 Interrupt Enable

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - ICBOF2 Interrupt Enable

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - ICBOF3 Interrupt Enable

impl R<u32, Reg<u32, _TOP>>

pub fn top(&self) -> TOP_R

Bits 0:31 - Counter Top Value

impl R<u32, Reg<u32, _TOPB>>

pub fn topb(&self) -> TOPB_R

Bits 0:31 - Counter Top Value Buffer

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:31 - Counter Value

impl R<u16, TIMERLOCKKEY_A>

pub fn variant(&self) -> Variant<u16, TIMERLOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn timerlockkey(&self) -> TIMERLOCKKEY_R

Bits 0:15 - Timer Lock Key

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn cc0pen(&self) -> CC0PEN_R

Bit 0 - CC Channel 0 Pin Enable

pub fn cc1pen(&self) -> CC1PEN_R

Bit 1 - CC Channel 1 Pin Enable

pub fn cc2pen(&self) -> CC2PEN_R

Bit 2 - CC Channel 2 Pin Enable

pub fn cc3pen(&self) -> CC3PEN_R

Bit 3 - CC Channel 3 Pin Enable

pub fn cdti0pen(&self) -> CDTI0PEN_R

Bit 8 - CC Channel 0 Complementary Dead-Time Insertion Pin Enable

pub fn cdti1pen(&self) -> CDTI1PEN_R

Bit 9 - CC Channel 1 Complementary Dead-Time Insertion Pin Enable

pub fn cdti2pen(&self) -> CDTI2PEN_R

Bit 10 - CC Channel 2 Complementary Dead-Time Insertion Pin Enable

impl R<u8, CC0LOC_A>

pub fn variant(&self) -> Variant<u8, CC0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC1LOC_A>

pub fn variant(&self) -> Variant<u8, CC1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC2LOC_A>

pub fn variant(&self) -> Variant<u8, CC2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC3LOC_A>

pub fn variant(&self) -> Variant<u8, CC3LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn cc0loc(&self) -> CC0LOC_R

Bits 0:5 - I/O Location

pub fn cc1loc(&self) -> CC1LOC_R

Bits 8:13 - I/O Location

pub fn cc2loc(&self) -> CC2LOC_R

Bits 16:21 - I/O Location

pub fn cc3loc(&self) -> CC3LOC_R

Bits 24:29 - I/O Location

impl R<u8, CDTI0LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI1LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI2LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u32, Reg<u32, _ROUTELOC2>>

pub fn cdti0loc(&self) -> CDTI0LOC_R

Bits 0:5 - I/O Location

pub fn cdti1loc(&self) -> CDTI1LOC_R

Bits 8:13 - I/O Location

pub fn cdti2loc(&self) -> CDTI2LOC_R

Bits 16:21 - I/O Location

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC0_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC0_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC0_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC0_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC1_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC1_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC1_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC1_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC2_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC2_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC2_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC2_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC3_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC3_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC3_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC3_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, DTPRSSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _DTCTRL>>

pub fn dten(&self) -> DTEN_R

Bit 0 - DTI Enable

pub fn dtdas(&self) -> DTDAS_R

Bit 1 - DTI Automatic Start-up Functionality

pub fn dtipol(&self) -> DTIPOL_R

Bit 2 - DTI Inactive Polarity

pub fn dtcinv(&self) -> DTCINV_R

Bit 3 - DTI Complementary Output Invert

pub fn dtprssel(&self) -> DTPRSSEL_R

Bits 4:8 - DTI PRS Source Channel Select

pub fn dtar(&self) -> DTAR_R

Bit 9 - DTI Always Run

pub fn dtfats(&self) -> DTFATS_R

Bit 10 - DTI Fault Action on Timer Stop

pub fn dtprsen(&self) -> DTPRSEN_R

Bit 24 - DTI PRS Source Enable

impl R<u8, DTPRESC_A>

pub fn variant(&self) -> Variant<u8, DTPRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _DTTIME>>

pub fn dtpresc(&self) -> DTPRESC_R

Bits 0:3 - DTI Prescaler Setting

pub fn dtriset(&self) -> DTRISET_R

Bits 8:13 - DTI Rise-time

pub fn dtfallt(&self) -> DTFALLT_R

Bits 16:21 - DTI Fall-time

impl R<u8, DTPRS0FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS0FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTPRS1FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS1FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTFA_A>

pub fn variant(&self) -> DTFA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_inactive(&self) -> bool

Checks if the value of the field is INACTIVE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_tristate(&self) -> bool

Checks if the value of the field is TRISTATE

impl R<u32, Reg<u32, _DTFC>>

pub fn dtprs0fsel(&self) -> DTPRS0FSEL_R

Bits 0:4 - DTI PRS Fault Source 0 Select

pub fn dtprs1fsel(&self) -> DTPRS1FSEL_R

Bits 8:12 - DTI PRS Fault Source 1 Select

pub fn dtfa(&self) -> DTFA_R

Bits 16:17 - DTI Fault Action

pub fn dtprs0fen(&self) -> DTPRS0FEN_R

Bit 24 - DTI PRS 0 Fault Enable

pub fn dtprs1fen(&self) -> DTPRS1FEN_R

Bit 25 - DTI PRS 1 Fault Enable

pub fn dtdbgfen(&self) -> DTDBGFEN_R

Bit 26 - DTI Debugger Fault Enable

pub fn dtlockupfen(&self) -> DTLOCKUPFEN_R

Bit 27 - DTI Lockup Fault Enable

impl R<u32, Reg<u32, _DTOGEN>>

pub fn dtogcc0en(&self) -> DTOGCC0EN_R

Bit 0 - DTI CC0 Output Generation Enable

pub fn dtogcc1en(&self) -> DTOGCC1EN_R

Bit 1 - DTI CC1 Output Generation Enable

pub fn dtogcc2en(&self) -> DTOGCC2EN_R

Bit 2 - DTI CC2 Output Generation Enable

pub fn dtogcdti0en(&self) -> DTOGCDTI0EN_R

Bit 3 - DTI CDTI0 Output Generation Enable

pub fn dtogcdti1en(&self) -> DTOGCDTI1EN_R

Bit 4 - DTI CDTI1 Output Generation Enable

pub fn dtogcdti2en(&self) -> DTOGCDTI2EN_R

Bit 5 - DTI CDTI2 Output Generation Enable

impl R<u32, Reg<u32, _DTFAULT>>

pub fn dtprs0f(&self) -> DTPRS0F_R

Bit 0 - DTI PRS 0 Fault

pub fn dtprs1f(&self) -> DTPRS1F_R

Bit 1 - DTI PRS 1 Fault

pub fn dtdbgf(&self) -> DTDBGF_R

Bit 2 - DTI Debugger Fault

pub fn dtlockupf(&self) -> DTLOCKUPF_R

Bit 3 - DTI Lockup Fault

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _DTLOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - DTI Lock Key

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_updown(&self) -> bool

Checks if the value of the field is UPDOWN

pub fn is_qdec(&self) -> bool

Checks if the value of the field is QDEC

impl R<u8, RISEA_A>

pub fn variant(&self) -> RISEA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, FALLA_A>

pub fn variant(&self) -> FALLA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, CLKSEL_A>

pub fn variant(&self) -> Variant<u8, CLKSEL_A>

Get enumerated values variant

pub fn is_preschfperclk(&self) -> bool

Checks if the value of the field is PRESCHFPERCLK

pub fn is_cc1(&self) -> bool

Checks if the value of the field is CC1

pub fn is_timerouf(&self) -> bool

Checks if the value of the field is TIMEROUF

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - Timer Mode

pub fn sync(&self) -> SYNC_R

Bit 3 - Timer Start/Stop/Reload Synchronization

pub fn osmen(&self) -> OSMEN_R

Bit 4 - One-shot Mode Enable

pub fn qdm(&self) -> QDM_R

Bit 5 - Quadrature Decoder Mode Selection

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 6 - Debug Mode Run Enable

pub fn dmaclract(&self) -> DMACLRACT_R

Bit 7 - DMA Request Clear on Active

pub fn risea(&self) -> RISEA_R

Bits 8:9 - Timer Rising Input Edge Action

pub fn falla(&self) -> FALLA_R

Bits 10:11 - Timer Falling Input Edge Action

pub fn x2cnt(&self) -> X2CNT_R

Bit 13 - 2x Count Mode

pub fn dissyncout(&self) -> DISSYNCOUT_R

Bit 14 - Disable Timer From Start/Stop/Reload Other Synchronized Timers

pub fn clksel(&self) -> CLKSEL_R

Bits 16:17 - Clock Source Select

pub fn presc(&self) -> PRESC_R

Bits 24:27 - Prescaler Setting

pub fn ati(&self) -> ATI_R

Bit 28 - Always Track Inputs

pub fn rsscoist(&self) -> RSSCOIST_R

Bit 29 - Reload-Start Sets Compare Output Initial State

impl R<u32, Reg<u32, _STATUS>>

pub fn running(&self) -> RUNNING_R

Bit 0 - Running

pub fn dir(&self) -> DIR_R

Bit 1 - Direction

pub fn topbv(&self) -> TOPBV_R

Bit 2 - TOPB Valid

pub fn ccvbv0(&self) -> CCVBV0_R

Bit 8 - CC0 CCVB Valid

pub fn ccvbv1(&self) -> CCVBV1_R

Bit 9 - CC1 CCVB Valid

pub fn ccvbv2(&self) -> CCVBV2_R

Bit 10 - CC2 CCVB Valid

pub fn ccvbv3(&self) -> CCVBV3_R

Bit 11 - CC3 CCVB Valid

pub fn icv0(&self) -> ICV0_R

Bit 16 - CC0 Input Capture Valid

pub fn icv1(&self) -> ICV1_R

Bit 17 - CC1 Input Capture Valid

pub fn icv2(&self) -> ICV2_R

Bit 18 - CC2 Input Capture Valid

pub fn icv3(&self) -> ICV3_R

Bit 19 - CC3 Input Capture Valid

pub fn ccpol0(&self) -> CCPOL0_R

Bit 24 - CC0 Polarity

pub fn ccpol1(&self) -> CCPOL1_R

Bit 25 - CC1 Polarity

pub fn ccpol2(&self) -> CCPOL2_R

Bit 26 - CC2 Polarity

pub fn ccpol3(&self) -> CCPOL3_R

Bit 27 - CC3 Polarity

impl R<u32, Reg<u32, _IF>>

pub fn of(&self) -> OF_R

Bit 0 - Overflow Interrupt Flag

pub fn uf(&self) -> UF_R

Bit 1 - Underflow Interrupt Flag

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - Direction Change Detect Interrupt Flag

pub fn cc0(&self) -> CC0_R

Bit 4 - CC Channel 0 Interrupt Flag

pub fn cc1(&self) -> CC1_R

Bit 5 - CC Channel 1 Interrupt Flag

pub fn cc2(&self) -> CC2_R

Bit 6 - CC Channel 2 Interrupt Flag

pub fn cc3(&self) -> CC3_R

Bit 7 - CC Channel 3 Interrupt Flag

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - CC Channel 0 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - CC Channel 1 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - CC Channel 2 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - CC Channel 3 Input Capture Buffer Overflow Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn of(&self) -> OF_R

Bit 0 - OF Interrupt Enable

pub fn uf(&self) -> UF_R

Bit 1 - UF Interrupt Enable

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - DIRCHG Interrupt Enable

pub fn cc0(&self) -> CC0_R

Bit 4 - CC0 Interrupt Enable

pub fn cc1(&self) -> CC1_R

Bit 5 - CC1 Interrupt Enable

pub fn cc2(&self) -> CC2_R

Bit 6 - CC2 Interrupt Enable

pub fn cc3(&self) -> CC3_R

Bit 7 - CC3 Interrupt Enable

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - ICBOF0 Interrupt Enable

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - ICBOF1 Interrupt Enable

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - ICBOF2 Interrupt Enable

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - ICBOF3 Interrupt Enable

impl R<u32, Reg<u32, _TOP>>

pub fn top(&self) -> TOP_R

Bits 0:31 - Counter Top Value

impl R<u32, Reg<u32, _TOPB>>

pub fn topb(&self) -> TOPB_R

Bits 0:31 - Counter Top Value Buffer

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:31 - Counter Value

impl R<u16, TIMERLOCKKEY_A>

pub fn variant(&self) -> Variant<u16, TIMERLOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn timerlockkey(&self) -> TIMERLOCKKEY_R

Bits 0:15 - Timer Lock Key

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn cc0pen(&self) -> CC0PEN_R

Bit 0 - CC Channel 0 Pin Enable

pub fn cc1pen(&self) -> CC1PEN_R

Bit 1 - CC Channel 1 Pin Enable

pub fn cc2pen(&self) -> CC2PEN_R

Bit 2 - CC Channel 2 Pin Enable

pub fn cc3pen(&self) -> CC3PEN_R

Bit 3 - CC Channel 3 Pin Enable

pub fn cdti0pen(&self) -> CDTI0PEN_R

Bit 8 - CC Channel 0 Complementary Dead-Time Insertion Pin Enable

pub fn cdti1pen(&self) -> CDTI1PEN_R

Bit 9 - CC Channel 1 Complementary Dead-Time Insertion Pin Enable

pub fn cdti2pen(&self) -> CDTI2PEN_R

Bit 10 - CC Channel 2 Complementary Dead-Time Insertion Pin Enable

impl R<u8, CC0LOC_A>

pub fn variant(&self) -> Variant<u8, CC0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC1LOC_A>

pub fn variant(&self) -> Variant<u8, CC1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC2LOC_A>

pub fn variant(&self) -> Variant<u8, CC2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC3LOC_A>

pub fn variant(&self) -> Variant<u8, CC3LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn cc0loc(&self) -> CC0LOC_R

Bits 0:5 - I/O Location

pub fn cc1loc(&self) -> CC1LOC_R

Bits 8:13 - I/O Location

pub fn cc2loc(&self) -> CC2LOC_R

Bits 16:21 - I/O Location

pub fn cc3loc(&self) -> CC3LOC_R

Bits 24:29 - I/O Location

impl R<u8, CDTI0LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI1LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI2LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u32, Reg<u32, _ROUTELOC2>>

pub fn cdti0loc(&self) -> CDTI0LOC_R

Bits 0:5 - I/O Location

pub fn cdti1loc(&self) -> CDTI1LOC_R

Bits 8:13 - I/O Location

pub fn cdti2loc(&self) -> CDTI2LOC_R

Bits 16:21 - I/O Location

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC0_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC0_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC0_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC0_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC1_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC1_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC1_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC1_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC2_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC2_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC2_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC2_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC3_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC3_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC3_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC3_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, DTPRSSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _DTCTRL>>

pub fn dten(&self) -> DTEN_R

Bit 0 - DTI Enable

pub fn dtdas(&self) -> DTDAS_R

Bit 1 - DTI Automatic Start-up Functionality

pub fn dtipol(&self) -> DTIPOL_R

Bit 2 - DTI Inactive Polarity

pub fn dtcinv(&self) -> DTCINV_R

Bit 3 - DTI Complementary Output Invert

pub fn dtprssel(&self) -> DTPRSSEL_R

Bits 4:8 - DTI PRS Source Channel Select

pub fn dtar(&self) -> DTAR_R

Bit 9 - DTI Always Run

pub fn dtfats(&self) -> DTFATS_R

Bit 10 - DTI Fault Action on Timer Stop

pub fn dtprsen(&self) -> DTPRSEN_R

Bit 24 - DTI PRS Source Enable

impl R<u8, DTPRESC_A>

pub fn variant(&self) -> Variant<u8, DTPRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _DTTIME>>

pub fn dtpresc(&self) -> DTPRESC_R

Bits 0:3 - DTI Prescaler Setting

pub fn dtriset(&self) -> DTRISET_R

Bits 8:13 - DTI Rise-time

pub fn dtfallt(&self) -> DTFALLT_R

Bits 16:21 - DTI Fall-time

impl R<u8, DTPRS0FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS0FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTPRS1FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS1FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTFA_A>

pub fn variant(&self) -> DTFA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_inactive(&self) -> bool

Checks if the value of the field is INACTIVE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_tristate(&self) -> bool

Checks if the value of the field is TRISTATE

impl R<u32, Reg<u32, _DTFC>>

pub fn dtprs0fsel(&self) -> DTPRS0FSEL_R

Bits 0:4 - DTI PRS Fault Source 0 Select

pub fn dtprs1fsel(&self) -> DTPRS1FSEL_R

Bits 8:12 - DTI PRS Fault Source 1 Select

pub fn dtfa(&self) -> DTFA_R

Bits 16:17 - DTI Fault Action

pub fn dtprs0fen(&self) -> DTPRS0FEN_R

Bit 24 - DTI PRS 0 Fault Enable

pub fn dtprs1fen(&self) -> DTPRS1FEN_R

Bit 25 - DTI PRS 1 Fault Enable

pub fn dtdbgfen(&self) -> DTDBGFEN_R

Bit 26 - DTI Debugger Fault Enable

pub fn dtlockupfen(&self) -> DTLOCKUPFEN_R

Bit 27 - DTI Lockup Fault Enable

impl R<u32, Reg<u32, _DTOGEN>>

pub fn dtogcc0en(&self) -> DTOGCC0EN_R

Bit 0 - DTI CC0 Output Generation Enable

pub fn dtogcc1en(&self) -> DTOGCC1EN_R

Bit 1 - DTI CC1 Output Generation Enable

pub fn dtogcc2en(&self) -> DTOGCC2EN_R

Bit 2 - DTI CC2 Output Generation Enable

pub fn dtogcdti0en(&self) -> DTOGCDTI0EN_R

Bit 3 - DTI CDTI0 Output Generation Enable

pub fn dtogcdti1en(&self) -> DTOGCDTI1EN_R

Bit 4 - DTI CDTI1 Output Generation Enable

pub fn dtogcdti2en(&self) -> DTOGCDTI2EN_R

Bit 5 - DTI CDTI2 Output Generation Enable

impl R<u32, Reg<u32, _DTFAULT>>

pub fn dtprs0f(&self) -> DTPRS0F_R

Bit 0 - DTI PRS 0 Fault

pub fn dtprs1f(&self) -> DTPRS1F_R

Bit 1 - DTI PRS 1 Fault

pub fn dtdbgf(&self) -> DTDBGF_R

Bit 2 - DTI Debugger Fault

pub fn dtlockupf(&self) -> DTLOCKUPF_R

Bit 3 - DTI Lockup Fault

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _DTLOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - DTI Lock Key

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_updown(&self) -> bool

Checks if the value of the field is UPDOWN

pub fn is_qdec(&self) -> bool

Checks if the value of the field is QDEC

impl R<u8, RISEA_A>

pub fn variant(&self) -> RISEA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, FALLA_A>

pub fn variant(&self) -> FALLA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_stop(&self) -> bool

Checks if the value of the field is STOP

pub fn is_reloadstart(&self) -> bool

Checks if the value of the field is RELOADSTART

impl R<u8, CLKSEL_A>

pub fn variant(&self) -> Variant<u8, CLKSEL_A>

Get enumerated values variant

pub fn is_preschfperclk(&self) -> bool

Checks if the value of the field is PRESCHFPERCLK

pub fn is_cc1(&self) -> bool

Checks if the value of the field is CC1

pub fn is_timerouf(&self) -> bool

Checks if the value of the field is TIMEROUF

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - Timer Mode

pub fn sync(&self) -> SYNC_R

Bit 3 - Timer Start/Stop/Reload Synchronization

pub fn osmen(&self) -> OSMEN_R

Bit 4 - One-shot Mode Enable

pub fn qdm(&self) -> QDM_R

Bit 5 - Quadrature Decoder Mode Selection

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 6 - Debug Mode Run Enable

pub fn dmaclract(&self) -> DMACLRACT_R

Bit 7 - DMA Request Clear on Active

pub fn risea(&self) -> RISEA_R

Bits 8:9 - Timer Rising Input Edge Action

pub fn falla(&self) -> FALLA_R

Bits 10:11 - Timer Falling Input Edge Action

pub fn x2cnt(&self) -> X2CNT_R

Bit 13 - 2x Count Mode

pub fn dissyncout(&self) -> DISSYNCOUT_R

Bit 14 - Disable Timer From Start/Stop/Reload Other Synchronized Timers

pub fn clksel(&self) -> CLKSEL_R

Bits 16:17 - Clock Source Select

pub fn presc(&self) -> PRESC_R

Bits 24:27 - Prescaler Setting

pub fn ati(&self) -> ATI_R

Bit 28 - Always Track Inputs

pub fn rsscoist(&self) -> RSSCOIST_R

Bit 29 - Reload-Start Sets Compare Output Initial State

impl R<u32, Reg<u32, _STATUS>>

pub fn running(&self) -> RUNNING_R

Bit 0 - Running

pub fn dir(&self) -> DIR_R

Bit 1 - Direction

pub fn topbv(&self) -> TOPBV_R

Bit 2 - TOPB Valid

pub fn ccvbv0(&self) -> CCVBV0_R

Bit 8 - CC0 CCVB Valid

pub fn ccvbv1(&self) -> CCVBV1_R

Bit 9 - CC1 CCVB Valid

pub fn ccvbv2(&self) -> CCVBV2_R

Bit 10 - CC2 CCVB Valid

pub fn ccvbv3(&self) -> CCVBV3_R

Bit 11 - CC3 CCVB Valid

pub fn icv0(&self) -> ICV0_R

Bit 16 - CC0 Input Capture Valid

pub fn icv1(&self) -> ICV1_R

Bit 17 - CC1 Input Capture Valid

pub fn icv2(&self) -> ICV2_R

Bit 18 - CC2 Input Capture Valid

pub fn icv3(&self) -> ICV3_R

Bit 19 - CC3 Input Capture Valid

pub fn ccpol0(&self) -> CCPOL0_R

Bit 24 - CC0 Polarity

pub fn ccpol1(&self) -> CCPOL1_R

Bit 25 - CC1 Polarity

pub fn ccpol2(&self) -> CCPOL2_R

Bit 26 - CC2 Polarity

pub fn ccpol3(&self) -> CCPOL3_R

Bit 27 - CC3 Polarity

impl R<u32, Reg<u32, _IF>>

pub fn of(&self) -> OF_R

Bit 0 - Overflow Interrupt Flag

pub fn uf(&self) -> UF_R

Bit 1 - Underflow Interrupt Flag

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - Direction Change Detect Interrupt Flag

pub fn cc0(&self) -> CC0_R

Bit 4 - CC Channel 0 Interrupt Flag

pub fn cc1(&self) -> CC1_R

Bit 5 - CC Channel 1 Interrupt Flag

pub fn cc2(&self) -> CC2_R

Bit 6 - CC Channel 2 Interrupt Flag

pub fn cc3(&self) -> CC3_R

Bit 7 - CC Channel 3 Interrupt Flag

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - CC Channel 0 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - CC Channel 1 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - CC Channel 2 Input Capture Buffer Overflow Interrupt Flag

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - CC Channel 3 Input Capture Buffer Overflow Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn of(&self) -> OF_R

Bit 0 - OF Interrupt Enable

pub fn uf(&self) -> UF_R

Bit 1 - UF Interrupt Enable

pub fn dirchg(&self) -> DIRCHG_R

Bit 2 - DIRCHG Interrupt Enable

pub fn cc0(&self) -> CC0_R

Bit 4 - CC0 Interrupt Enable

pub fn cc1(&self) -> CC1_R

Bit 5 - CC1 Interrupt Enable

pub fn cc2(&self) -> CC2_R

Bit 6 - CC2 Interrupt Enable

pub fn cc3(&self) -> CC3_R

Bit 7 - CC3 Interrupt Enable

pub fn icbof0(&self) -> ICBOF0_R

Bit 8 - ICBOF0 Interrupt Enable

pub fn icbof1(&self) -> ICBOF1_R

Bit 9 - ICBOF1 Interrupt Enable

pub fn icbof2(&self) -> ICBOF2_R

Bit 10 - ICBOF2 Interrupt Enable

pub fn icbof3(&self) -> ICBOF3_R

Bit 11 - ICBOF3 Interrupt Enable

impl R<u32, Reg<u32, _TOP>>

pub fn top(&self) -> TOP_R

Bits 0:31 - Counter Top Value

impl R<u32, Reg<u32, _TOPB>>

pub fn topb(&self) -> TOPB_R

Bits 0:31 - Counter Top Value Buffer

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:31 - Counter Value

impl R<u16, TIMERLOCKKEY_A>

pub fn variant(&self) -> Variant<u16, TIMERLOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn timerlockkey(&self) -> TIMERLOCKKEY_R

Bits 0:15 - Timer Lock Key

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn cc0pen(&self) -> CC0PEN_R

Bit 0 - CC Channel 0 Pin Enable

pub fn cc1pen(&self) -> CC1PEN_R

Bit 1 - CC Channel 1 Pin Enable

pub fn cc2pen(&self) -> CC2PEN_R

Bit 2 - CC Channel 2 Pin Enable

pub fn cc3pen(&self) -> CC3PEN_R

Bit 3 - CC Channel 3 Pin Enable

pub fn cdti0pen(&self) -> CDTI0PEN_R

Bit 8 - CC Channel 0 Complementary Dead-Time Insertion Pin Enable

pub fn cdti1pen(&self) -> CDTI1PEN_R

Bit 9 - CC Channel 1 Complementary Dead-Time Insertion Pin Enable

pub fn cdti2pen(&self) -> CDTI2PEN_R

Bit 10 - CC Channel 2 Complementary Dead-Time Insertion Pin Enable

impl R<u8, CC0LOC_A>

pub fn variant(&self) -> Variant<u8, CC0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC1LOC_A>

pub fn variant(&self) -> Variant<u8, CC1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC2LOC_A>

pub fn variant(&self) -> Variant<u8, CC2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, CC3LOC_A>

pub fn variant(&self) -> Variant<u8, CC3LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn cc0loc(&self) -> CC0LOC_R

Bits 0:5 - I/O Location

pub fn cc1loc(&self) -> CC1LOC_R

Bits 8:13 - I/O Location

pub fn cc2loc(&self) -> CC2LOC_R

Bits 16:21 - I/O Location

pub fn cc3loc(&self) -> CC3LOC_R

Bits 24:29 - I/O Location

impl R<u8, CDTI0LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI1LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u8, CDTI2LOC_A>

pub fn variant(&self) -> Variant<u8, CDTI2LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

impl R<u32, Reg<u32, _ROUTELOC2>>

pub fn cdti0loc(&self) -> CDTI0LOC_R

Bits 0:5 - I/O Location

pub fn cdti1loc(&self) -> CDTI1LOC_R

Bits 8:13 - I/O Location

pub fn cdti2loc(&self) -> CDTI2LOC_R

Bits 16:21 - I/O Location

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC0_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC0_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC0_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC0_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC1_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC1_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC1_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC1_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC2_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC2_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC2_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC2_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, MODE_A>

pub fn variant(&self) -> MODE_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, COFOA_A>

pub fn variant(&self) -> COFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, CUFOA_A>

pub fn variant(&self) -> CUFOA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, ICEVCTRL_A>

pub fn variant(&self) -> ICEVCTRL_A

Get enumerated values variant

pub fn is_everyedge(&self) -> bool

Checks if the value of the field is EVERYEDGE

pub fn is_everysecondedge(&self) -> bool

Checks if the value of the field is EVERYSECONDEDGE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

impl R<u32, Reg<u32, _CC3_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn outinv(&self) -> OUTINV_R

Bit 2 - Output Invert

pub fn coist(&self) -> COIST_R

Bit 4 - Compare Output Initial State

pub fn cmoa(&self) -> CMOA_R

Bits 8:9 - Compare Match Output Action

pub fn cofoa(&self) -> COFOA_R

Bits 10:11 - Counter Overflow Output Action

pub fn cufoa(&self) -> CUFOA_R

Bits 12:13 - Counter Underflow Output Action

pub fn prssel(&self) -> PRSSEL_R

Bits 16:20 - Compare/Capture Channel PRS Input Channel Selection

pub fn icedge(&self) -> ICEDGE_R

Bits 24:25 - Input Capture Edge Select

pub fn icevctrl(&self) -> ICEVCTRL_R

Bits 26:27 - Input Capture Event Control

pub fn prsconf(&self) -> PRSCONF_R

Bit 28 - PRS Configuration

pub fn insel(&self) -> INSEL_R

Bit 29 - Input Selection

pub fn filt(&self) -> FILT_R

Bit 30 - Digital Filter

impl R<u32, Reg<u32, _CC3_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - CC Channel Value

impl R<u32, Reg<u32, _CC3_CCVP>>

pub fn ccvp(&self) -> CCVP_R

Bits 0:31 - CC Channel Value Peek

impl R<u32, Reg<u32, _CC3_CCVB>>

pub fn ccvb(&self) -> CCVB_R

Bits 0:31 - CC Channel Value Buffer

impl R<u8, DTPRSSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _DTCTRL>>

pub fn dten(&self) -> DTEN_R

Bit 0 - DTI Enable

pub fn dtdas(&self) -> DTDAS_R

Bit 1 - DTI Automatic Start-up Functionality

pub fn dtipol(&self) -> DTIPOL_R

Bit 2 - DTI Inactive Polarity

pub fn dtcinv(&self) -> DTCINV_R

Bit 3 - DTI Complementary Output Invert

pub fn dtprssel(&self) -> DTPRSSEL_R

Bits 4:8 - DTI PRS Source Channel Select

pub fn dtar(&self) -> DTAR_R

Bit 9 - DTI Always Run

pub fn dtfats(&self) -> DTFATS_R

Bit 10 - DTI Fault Action on Timer Stop

pub fn dtprsen(&self) -> DTPRSEN_R

Bit 24 - DTI PRS Source Enable

impl R<u8, DTPRESC_A>

pub fn variant(&self) -> Variant<u8, DTPRESC_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

impl R<u32, Reg<u32, _DTTIME>>

pub fn dtpresc(&self) -> DTPRESC_R

Bits 0:3 - DTI Prescaler Setting

pub fn dtriset(&self) -> DTRISET_R

Bits 8:13 - DTI Rise-time

pub fn dtfallt(&self) -> DTFALLT_R

Bits 16:21 - DTI Fall-time

impl R<u8, DTPRS0FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS0FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTPRS1FSEL_A>

pub fn variant(&self) -> Variant<u8, DTPRS1FSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, DTFA_A>

pub fn variant(&self) -> DTFA_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_inactive(&self) -> bool

Checks if the value of the field is INACTIVE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_tristate(&self) -> bool

Checks if the value of the field is TRISTATE

impl R<u32, Reg<u32, _DTFC>>

pub fn dtprs0fsel(&self) -> DTPRS0FSEL_R

Bits 0:4 - DTI PRS Fault Source 0 Select

pub fn dtprs1fsel(&self) -> DTPRS1FSEL_R

Bits 8:12 - DTI PRS Fault Source 1 Select

pub fn dtfa(&self) -> DTFA_R

Bits 16:17 - DTI Fault Action

pub fn dtprs0fen(&self) -> DTPRS0FEN_R

Bit 24 - DTI PRS 0 Fault Enable

pub fn dtprs1fen(&self) -> DTPRS1FEN_R

Bit 25 - DTI PRS 1 Fault Enable

pub fn dtdbgfen(&self) -> DTDBGFEN_R

Bit 26 - DTI Debugger Fault Enable

pub fn dtlockupfen(&self) -> DTLOCKUPFEN_R

Bit 27 - DTI Lockup Fault Enable

impl R<u32, Reg<u32, _DTOGEN>>

pub fn dtogcc0en(&self) -> DTOGCC0EN_R

Bit 0 - DTI CC0 Output Generation Enable

pub fn dtogcc1en(&self) -> DTOGCC1EN_R

Bit 1 - DTI CC1 Output Generation Enable

pub fn dtogcc2en(&self) -> DTOGCC2EN_R

Bit 2 - DTI CC2 Output Generation Enable

pub fn dtogcdti0en(&self) -> DTOGCDTI0EN_R

Bit 3 - DTI CDTI0 Output Generation Enable

pub fn dtogcdti1en(&self) -> DTOGCDTI1EN_R

Bit 4 - DTI CDTI1 Output Generation Enable

pub fn dtogcdti2en(&self) -> DTOGCDTI2EN_R

Bit 5 - DTI CDTI2 Output Generation Enable

impl R<u32, Reg<u32, _DTFAULT>>

pub fn dtprs0f(&self) -> DTPRS0F_R

Bit 0 - DTI PRS 0 Fault

pub fn dtprs1f(&self) -> DTPRS1F_R

Bit 1 - DTI PRS 1 Fault

pub fn dtdbgf(&self) -> DTDBGF_R

Bit 2 - DTI Debugger Fault

pub fn dtlockupf(&self) -> DTLOCKUPF_R

Bit 3 - DTI Lockup Fault

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _DTLOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - DTI Lock Key

impl R<u8, OVS_A>

pub fn variant(&self) -> OVS_A

Get enumerated values variant

pub fn is_x16(&self) -> bool

Checks if the value of the field is X16

pub fn is_x8(&self) -> bool

Checks if the value of the field is X8

pub fn is_x6(&self) -> bool

Checks if the value of the field is X6

pub fn is_x4(&self) -> bool

Checks if the value of the field is X4

impl R<u32, Reg<u32, _CTRL>>

pub fn sync(&self) -> SYNC_R

Bit 0 - USART Synchronous Mode

pub fn loopbk(&self) -> LOOPBK_R

Bit 1 - Loopback Enable

pub fn ccen(&self) -> CCEN_R

Bit 2 - Collision Check Enable

pub fn mpm(&self) -> MPM_R

Bit 3 - Multi-Processor Mode

pub fn mpab(&self) -> MPAB_R

Bit 4 - Multi-Processor Address-Bit

pub fn ovs(&self) -> OVS_R

Bits 5:6 - Oversampling

pub fn clkpol(&self) -> CLKPOL_R

Bit 8 - Clock Polarity

pub fn clkpha(&self) -> CLKPHA_R

Bit 9 - Clock Edge for Setup/Sample

pub fn msbf(&self) -> MSBF_R

Bit 10 - Most Significant Bit First

pub fn csma(&self) -> CSMA_R

Bit 11 - Action on Slave-Select in Master Mode

pub fn txbil(&self) -> TXBIL_R

Bit 12 - TX Buffer Interrupt Level

pub fn rxinv(&self) -> RXINV_R

Bit 13 - Receiver Input Invert

pub fn txinv(&self) -> TXINV_R

Bit 14 - Transmitter Output Invert

pub fn csinv(&self) -> CSINV_R

Bit 15 - Chip Select Invert

pub fn autocs(&self) -> AUTOCS_R

Bit 16 - Automatic Chip Select

pub fn autotri(&self) -> AUTOTRI_R

Bit 17 - Automatic TX Tristate

pub fn scmode(&self) -> SCMODE_R

Bit 18 - SmartCard Mode

pub fn scretrans(&self) -> SCRETRANS_R

Bit 19 - SmartCard Retransmit

pub fn skipperrf(&self) -> SKIPPERRF_R

Bit 20 - Skip Parity Error Frames

pub fn bit8dv(&self) -> BIT8DV_R

Bit 21 - Bit 8 Default Value

pub fn errsdma(&self) -> ERRSDMA_R

Bit 22 - Halt DMA on Error

pub fn errsrx(&self) -> ERRSRX_R

Bit 23 - Disable RX on Error

pub fn errstx(&self) -> ERRSTX_R

Bit 24 - Disable TX on Error

pub fn sssearly(&self) -> SSSEARLY_R

Bit 25 - Synchronous Slave Setup Early

pub fn byteswap(&self) -> BYTESWAP_R

Bit 28 - Byteswap in Double Accesses

pub fn autotx(&self) -> AUTOTX_R

Bit 29 - Always Transmit When RX Not Full

pub fn mvdis(&self) -> MVDIS_R

Bit 30 - Majority Vote Disable

pub fn smsdelay(&self) -> SMSDELAY_R

Bit 31 - Synchronous Master Sample Delay

impl R<u8, DATABITS_A>

pub fn variant(&self) -> Variant<u8, DATABITS_A>

Get enumerated values variant

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_five(&self) -> bool

Checks if the value of the field is FIVE

pub fn is_six(&self) -> bool

Checks if the value of the field is SIX

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

pub fn is_nine(&self) -> bool

Checks if the value of the field is NINE

pub fn is_ten(&self) -> bool

Checks if the value of the field is TEN

pub fn is_eleven(&self) -> bool

Checks if the value of the field is ELEVEN

pub fn is_twelve(&self) -> bool

Checks if the value of the field is TWELVE

pub fn is_thirteen(&self) -> bool

Checks if the value of the field is THIRTEEN

pub fn is_fourteen(&self) -> bool

Checks if the value of the field is FOURTEEN

pub fn is_fifteen(&self) -> bool

Checks if the value of the field is FIFTEEN

pub fn is_sixteen(&self) -> bool

Checks if the value of the field is SIXTEEN

impl R<u8, PARITY_A>

pub fn variant(&self) -> Variant<u8, PARITY_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_even(&self) -> bool

Checks if the value of the field is EVEN

pub fn is_odd(&self) -> bool

Checks if the value of the field is ODD

impl R<u8, STOPBITS_A>

pub fn variant(&self) -> STOPBITS_A

Get enumerated values variant

pub fn is_half(&self) -> bool

Checks if the value of the field is HALF

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_oneandahalf(&self) -> bool

Checks if the value of the field is ONEANDAHALF

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

impl R<u32, Reg<u32, _FRAME>>

pub fn databits(&self) -> DATABITS_R

Bits 0:3 - Data-Bit Mode

pub fn parity(&self) -> PARITY_R

Bits 8:9 - Parity-Bit Mode

pub fn stopbits(&self) -> STOPBITS_R

Bits 12:13 - Stop-Bit Mode

impl R<u8, TSEL_A>

pub fn variant(&self) -> Variant<u8, TSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _TRIGCTRL>>

pub fn rxten(&self) -> RXTEN_R

Bit 4 - Receive Trigger Enable

pub fn txten(&self) -> TXTEN_R

Bit 5 - Transmit Trigger Enable

pub fn autotxten(&self) -> AUTOTXTEN_R

Bit 6 - AUTOTX Trigger Enable

pub fn txarx0en(&self) -> TXARX0EN_R

Bit 7 - Enable Transmit Trigger After RX End of Frame Plus TCMP0VAL

pub fn txarx1en(&self) -> TXARX1EN_R

Bit 8 - Enable Transmit Trigger After RX End of Frame Plus TCMP1VAL

pub fn txarx2en(&self) -> TXARX2EN_R

Bit 9 - Enable Transmit Trigger After RX End of Frame Plus TCMP2VAL

pub fn rxatx0en(&self) -> RXATX0EN_R

Bit 10 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL0 Baud-times

pub fn rxatx1en(&self) -> RXATX1EN_R

Bit 11 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL1 Baud-times

pub fn rxatx2en(&self) -> RXATX2EN_R

Bit 12 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL2 Baud-times

pub fn tsel(&self) -> TSEL_R

Bits 16:20 - Trigger PRS Channel Select

impl R<u32, Reg<u32, _STATUS>>

pub fn rxens(&self) -> RXENS_R

Bit 0 - Receiver Enable Status

pub fn txens(&self) -> TXENS_R

Bit 1 - Transmitter Enable Status

pub fn master(&self) -> MASTER_R

Bit 2 - SPI Master Mode

pub fn rxblock(&self) -> RXBLOCK_R

Bit 3 - Block Incoming Data

pub fn txtri(&self) -> TXTRI_R

Bit 4 - Transmitter Tristated

pub fn txc(&self) -> TXC_R

Bit 5 - TX Complete

pub fn txbl(&self) -> TXBL_R

Bit 6 - TX Buffer Level

pub fn rxdatav(&self) -> RXDATAV_R

Bit 7 - RX Data Valid

pub fn rxfull(&self) -> RXFULL_R

Bit 8 - RX FIFO Full

pub fn txbdright(&self) -> TXBDRIGHT_R

Bit 9 - TX Buffer Expects Double Right Data

pub fn txbsright(&self) -> TXBSRIGHT_R

Bit 10 - TX Buffer Expects Single Right Data

pub fn rxdatavright(&self) -> RXDATAVRIGHT_R

Bit 11 - RX Data Right

pub fn rxfullright(&self) -> RXFULLRIGHT_R

Bit 12 - RX Full of Right Data

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle

pub fn timerrestarted(&self) -> TIMERRESTARTED_R

Bit 14 - The USART Timer Restarted Itself

pub fn txbufcnt(&self) -> TXBUFCNT_R

Bits 16:17 - TX Buffer Count

impl R<u32, Reg<u32, _CLKDIV>>

pub fn div(&self) -> DIV_R

Bits 3:22 - Fractional Clock Divider

pub fn autobauden(&self) -> AUTOBAUDEN_R

Bit 31 - AUTOBAUD Detection Enable

impl R<u32, Reg<u32, _RXDATAX>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:8 - RX Data

pub fn perr(&self) -> PERR_R

Bit 14 - Data Parity Error

pub fn ferr(&self) -> FERR_R

Bit 15 - Data Framing Error

impl R<u32, Reg<u32, _RXDATA>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:7 - RX Data

impl R<u32, Reg<u32, _RXDOUBLEX>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:8 - RX Data 0

pub fn perr0(&self) -> PERR0_R

Bit 14 - Data Parity Error 0

pub fn ferr0(&self) -> FERR0_R

Bit 15 - Data Framing Error 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 16:24 - RX Data 1

pub fn perr1(&self) -> PERR1_R

Bit 30 - Data Parity Error 1

pub fn ferr1(&self) -> FERR1_R

Bit 31 - Data Framing Error 1

impl R<u32, Reg<u32, _RXDOUBLE>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:7 - RX Data 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 8:15 - RX Data 1

impl R<u32, Reg<u32, _RXDATAXP>>

pub fn rxdatap(&self) -> RXDATAP_R

Bits 0:8 - RX Data Peek

pub fn perrp(&self) -> PERRP_R

Bit 14 - Data Parity Error Peek

pub fn ferrp(&self) -> FERRP_R

Bit 15 - Data Framing Error Peek

impl R<u32, Reg<u32, _RXDOUBLEXP>>

pub fn rxdatap0(&self) -> RXDATAP0_R

Bits 0:8 - RX Data 0 Peek

pub fn perrp0(&self) -> PERRP0_R

Bit 14 - Data Parity Error 0 Peek

pub fn ferrp0(&self) -> FERRP0_R

Bit 15 - Data Framing Error 0 Peek

pub fn rxdatap1(&self) -> RXDATAP1_R

Bits 16:24 - RX Data 1 Peek

pub fn perrp1(&self) -> PERRP1_R

Bit 30 - Data Parity Error 1 Peek

pub fn ferrp1(&self) -> FERRP1_R

Bit 31 - Data Framing Error 1 Peek

impl R<u32, Reg<u32, _TXDATAX>>

pub fn txdatax(&self) -> TXDATAX_R

Bits 0:8 - TX Data

pub fn ubrxat(&self) -> UBRXAT_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat(&self) -> TXTRIAT_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak(&self) -> TXBREAK_R

Bit 13 - Transmit Data as Break

pub fn txdisat(&self) -> TXDISAT_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat(&self) -> RXENAT_R

Bit 15 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDATA>>

pub fn txdata(&self) -> TXDATA_R

Bits 0:7 - TX Data

impl R<u32, Reg<u32, _TXDOUBLEX>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:8 - TX Data

pub fn ubrxat0(&self) -> UBRXAT0_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat0(&self) -> TXTRIAT0_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak0(&self) -> TXBREAK0_R

Bit 13 - Transmit Data as Break

pub fn txdisat0(&self) -> TXDISAT0_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat0(&self) -> RXENAT0_R

Bit 15 - Enable RX After Transmission

pub fn txdata1(&self) -> TXDATA1_R

Bits 16:24 - TX Data

pub fn ubrxat1(&self) -> UBRXAT1_R

Bit 27 - Unblock RX After Transmission

pub fn txtriat1(&self) -> TXTRIAT1_R

Bit 28 - Set TXTRI After Transmission

pub fn txbreak1(&self) -> TXBREAK1_R

Bit 29 - Transmit Data as Break

pub fn txdisat1(&self) -> TXDISAT1_R

Bit 30 - Clear TXEN After Transmission

pub fn rxenat1(&self) -> RXENAT1_R

Bit 31 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDOUBLE>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:7 - TX Data

pub fn txdata1(&self) -> TXDATA1_R

Bits 8:15 - TX Data

impl R<u32, Reg<u32, _IF>>

pub fn txc(&self) -> TXC_R

Bit 0 - TX Complete Interrupt Flag

pub fn txbl(&self) -> TXBL_R

Bit 1 - TX Buffer Level Interrupt Flag

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RX Data Valid Interrupt Flag

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RX Buffer Full Interrupt Flag

pub fn rxof(&self) -> RXOF_R

Bit 4 - RX Overflow Interrupt Flag

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RX Underflow Interrupt Flag

pub fn txof(&self) -> TXOF_R

Bit 6 - TX Overflow Interrupt Flag

pub fn txuf(&self) -> TXUF_R

Bit 7 - TX Underflow Interrupt Flag

pub fn perr(&self) -> PERR_R

Bit 8 - Parity Error Interrupt Flag

pub fn ferr(&self) -> FERR_R

Bit 9 - Framing Error Interrupt Flag

pub fn mpaf(&self) -> MPAF_R

Bit 10 - Multi-Processor Address Frame Interrupt Flag

pub fn ssm(&self) -> SSM_R

Bit 11 - Slave-Select in Master Mode Interrupt Flag

pub fn ccf(&self) -> CCF_R

Bit 12 - Collision Check Fail Interrupt Flag

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle Interrupt Flag

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - Timer Comparator 0 Interrupt Flag

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - Timer Comparator 1 Interrupt Flag

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - Timer Comparator 2 Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn txc(&self) -> TXC_R

Bit 0 - TXC Interrupt Enable

pub fn txbl(&self) -> TXBL_R

Bit 1 - TXBL Interrupt Enable

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RXDATAV Interrupt Enable

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RXFULL Interrupt Enable

pub fn rxof(&self) -> RXOF_R

Bit 4 - RXOF Interrupt Enable

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RXUF Interrupt Enable

pub fn txof(&self) -> TXOF_R

Bit 6 - TXOF Interrupt Enable

pub fn txuf(&self) -> TXUF_R

Bit 7 - TXUF Interrupt Enable

pub fn perr(&self) -> PERR_R

Bit 8 - PERR Interrupt Enable

pub fn ferr(&self) -> FERR_R

Bit 9 - FERR Interrupt Enable

pub fn mpaf(&self) -> MPAF_R

Bit 10 - MPAF Interrupt Enable

pub fn ssm(&self) -> SSM_R

Bit 11 - SSM Interrupt Enable

pub fn ccf(&self) -> CCF_R

Bit 12 - CCF Interrupt Enable

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TXIDLE Interrupt Enable

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - TCMP0 Interrupt Enable

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - TCMP1 Interrupt Enable

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - TCMP2 Interrupt Enable

impl R<u8, IRPW_A>

pub fn variant(&self) -> IRPW_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

impl R<u8, IRPRSSEL_A>

pub fn variant(&self) -> Variant<u8, IRPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _IRCTRL>>

pub fn iren(&self) -> IREN_R

Bit 0 - Enable IrDA Module

pub fn irpw(&self) -> IRPW_R

Bits 1:2 - IrDA TX Pulse Width

pub fn irfilt(&self) -> IRFILT_R

Bit 3 - IrDA RX Filter

pub fn irprsen(&self) -> IRPRSEN_R

Bit 7 - IrDA PRS Channel Enable

pub fn irprssel(&self) -> IRPRSSEL_R

Bits 8:12 - IrDA PRS Channel Select

impl R<u8, RXPRSSEL_A>

pub fn variant(&self) -> Variant<u8, RXPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, CLKPRSSEL_A>

pub fn variant(&self) -> Variant<u8, CLKPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _INPUT>>

pub fn rxprssel(&self) -> RXPRSSEL_R

Bits 0:4 - RX PRS Channel Select

pub fn rxprs(&self) -> RXPRS_R

Bit 7 - PRS RX Enable

pub fn clkprssel(&self) -> CLKPRSSEL_R

Bits 8:12 - CLK PRS Channel Select

pub fn clkprs(&self) -> CLKPRS_R

Bit 15 - PRS CLK Enable

impl R<u8, FORMAT_A>

pub fn variant(&self) -> FORMAT_A

Get enumerated values variant

pub fn is_w32d32(&self) -> bool

Checks if the value of the field is W32D32

pub fn is_w32d24m(&self) -> bool

Checks if the value of the field is W32D24M

pub fn is_w32d24(&self) -> bool

Checks if the value of the field is W32D24

pub fn is_w32d16(&self) -> bool

Checks if the value of the field is W32D16

pub fn is_w32d8(&self) -> bool

Checks if the value of the field is W32D8

pub fn is_w16d16(&self) -> bool

Checks if the value of the field is W16D16

pub fn is_w16d8(&self) -> bool

Checks if the value of the field is W16D8

pub fn is_w8d8(&self) -> bool

Checks if the value of the field is W8D8

impl R<u32, Reg<u32, _I2SCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable I2S Mode

pub fn mono(&self) -> MONO_R

Bit 1 - Stero or Mono

pub fn justify(&self) -> JUSTIFY_R

Bit 2 - Justification of I2S Data

pub fn dmasplit(&self) -> DMASPLIT_R

Bit 3 - Separate DMA Request for Left/Right Data

pub fn delay(&self) -> DELAY_R

Bit 4 - Delay on I2S Data

pub fn format(&self) -> FORMAT_R

Bits 8:10 - I2S Word Format

impl R<u8, TXDELAY_A>

pub fn variant(&self) -> TXDELAY_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSSETUP_A>

pub fn variant(&self) -> CSSETUP_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, ICS_A>

pub fn variant(&self) -> ICS_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSHOLD_A>

pub fn variant(&self) -> CSHOLD_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u32, Reg<u32, _TIMING>>

pub fn txdelay(&self) -> TXDELAY_R

Bits 16:18 - TX Frame Start Delay

pub fn cssetup(&self) -> CSSETUP_R

Bits 20:22 - Chip Select Setup

pub fn ics(&self) -> ICS_R

Bits 24:26 - Inter-character Spacing

pub fn cshold(&self) -> CSHOLD_R

Bits 28:30 - Chip Select Hold

impl R<u32, Reg<u32, _CTRLX>>

pub fn dbghalt(&self) -> DBGHALT_R

Bit 0 - Debug Halt

pub fn ctsinv(&self) -> CTSINV_R

Bit 1 - CTS Pin Inversion

pub fn ctsen(&self) -> CTSEN_R

Bit 2 - CTS Function Enabled

pub fn rtsinv(&self) -> RTSINV_R

Bit 3 - RTS Pin Inversion

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP0>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 0

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 0

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP0

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP1>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 1

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 1

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP1

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP2>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 2

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 2

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP2

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn rxpen(&self) -> RXPEN_R

Bit 0 - RX Pin Enable

pub fn txpen(&self) -> TXPEN_R

Bit 1 - TX Pin Enable

pub fn cspen(&self) -> CSPEN_R

Bit 2 - CS Pin Enable

pub fn clkpen(&self) -> CLKPEN_R

Bit 3 - CLK Pin Enable

pub fn ctspen(&self) -> CTSPEN_R

Bit 4 - CTS Pin Enable

pub fn rtspen(&self) -> RTSPEN_R

Bit 5 - RTS Pin Enable

impl R<u8, RXLOC_A>

pub fn variant(&self) -> Variant<u8, RXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, TXLOC_A>

pub fn variant(&self) -> Variant<u8, TXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CSLOC_A>

pub fn variant(&self) -> Variant<u8, CSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CLKLOC_A>

pub fn variant(&self) -> Variant<u8, CLKLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn rxloc(&self) -> RXLOC_R

Bits 0:5 - I/O Location

pub fn txloc(&self) -> TXLOC_R

Bits 8:13 - I/O Location

pub fn csloc(&self) -> CSLOC_R

Bits 16:21 - I/O Location

pub fn clkloc(&self) -> CLKLOC_R

Bits 24:29 - I/O Location

impl R<u8, CTSLOC_A>

pub fn variant(&self) -> Variant<u8, CTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, RTSLOC_A>

pub fn variant(&self) -> Variant<u8, RTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC1>>

pub fn ctsloc(&self) -> CTSLOC_R

Bits 0:5 - I/O Location

pub fn rtsloc(&self) -> RTSLOC_R

Bits 8:13 - I/O Location

impl R<u8, OVS_A>

pub fn variant(&self) -> OVS_A

Get enumerated values variant

pub fn is_x16(&self) -> bool

Checks if the value of the field is X16

pub fn is_x8(&self) -> bool

Checks if the value of the field is X8

pub fn is_x6(&self) -> bool

Checks if the value of the field is X6

pub fn is_x4(&self) -> bool

Checks if the value of the field is X4

impl R<u32, Reg<u32, _CTRL>>

pub fn sync(&self) -> SYNC_R

Bit 0 - USART Synchronous Mode

pub fn loopbk(&self) -> LOOPBK_R

Bit 1 - Loopback Enable

pub fn ccen(&self) -> CCEN_R

Bit 2 - Collision Check Enable

pub fn mpm(&self) -> MPM_R

Bit 3 - Multi-Processor Mode

pub fn mpab(&self) -> MPAB_R

Bit 4 - Multi-Processor Address-Bit

pub fn ovs(&self) -> OVS_R

Bits 5:6 - Oversampling

pub fn clkpol(&self) -> CLKPOL_R

Bit 8 - Clock Polarity

pub fn clkpha(&self) -> CLKPHA_R

Bit 9 - Clock Edge for Setup/Sample

pub fn msbf(&self) -> MSBF_R

Bit 10 - Most Significant Bit First

pub fn csma(&self) -> CSMA_R

Bit 11 - Action on Slave-Select in Master Mode

pub fn txbil(&self) -> TXBIL_R

Bit 12 - TX Buffer Interrupt Level

pub fn rxinv(&self) -> RXINV_R

Bit 13 - Receiver Input Invert

pub fn txinv(&self) -> TXINV_R

Bit 14 - Transmitter Output Invert

pub fn csinv(&self) -> CSINV_R

Bit 15 - Chip Select Invert

pub fn autocs(&self) -> AUTOCS_R

Bit 16 - Automatic Chip Select

pub fn autotri(&self) -> AUTOTRI_R

Bit 17 - Automatic TX Tristate

pub fn scmode(&self) -> SCMODE_R

Bit 18 - SmartCard Mode

pub fn scretrans(&self) -> SCRETRANS_R

Bit 19 - SmartCard Retransmit

pub fn skipperrf(&self) -> SKIPPERRF_R

Bit 20 - Skip Parity Error Frames

pub fn bit8dv(&self) -> BIT8DV_R

Bit 21 - Bit 8 Default Value

pub fn errsdma(&self) -> ERRSDMA_R

Bit 22 - Halt DMA on Error

pub fn errsrx(&self) -> ERRSRX_R

Bit 23 - Disable RX on Error

pub fn errstx(&self) -> ERRSTX_R

Bit 24 - Disable TX on Error

pub fn sssearly(&self) -> SSSEARLY_R

Bit 25 - Synchronous Slave Setup Early

pub fn byteswap(&self) -> BYTESWAP_R

Bit 28 - Byteswap in Double Accesses

pub fn autotx(&self) -> AUTOTX_R

Bit 29 - Always Transmit When RX Not Full

pub fn mvdis(&self) -> MVDIS_R

Bit 30 - Majority Vote Disable

pub fn smsdelay(&self) -> SMSDELAY_R

Bit 31 - Synchronous Master Sample Delay

impl R<u8, DATABITS_A>

pub fn variant(&self) -> Variant<u8, DATABITS_A>

Get enumerated values variant

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_five(&self) -> bool

Checks if the value of the field is FIVE

pub fn is_six(&self) -> bool

Checks if the value of the field is SIX

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

pub fn is_nine(&self) -> bool

Checks if the value of the field is NINE

pub fn is_ten(&self) -> bool

Checks if the value of the field is TEN

pub fn is_eleven(&self) -> bool

Checks if the value of the field is ELEVEN

pub fn is_twelve(&self) -> bool

Checks if the value of the field is TWELVE

pub fn is_thirteen(&self) -> bool

Checks if the value of the field is THIRTEEN

pub fn is_fourteen(&self) -> bool

Checks if the value of the field is FOURTEEN

pub fn is_fifteen(&self) -> bool

Checks if the value of the field is FIFTEEN

pub fn is_sixteen(&self) -> bool

Checks if the value of the field is SIXTEEN

impl R<u8, PARITY_A>

pub fn variant(&self) -> Variant<u8, PARITY_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_even(&self) -> bool

Checks if the value of the field is EVEN

pub fn is_odd(&self) -> bool

Checks if the value of the field is ODD

impl R<u8, STOPBITS_A>

pub fn variant(&self) -> STOPBITS_A

Get enumerated values variant

pub fn is_half(&self) -> bool

Checks if the value of the field is HALF

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_oneandahalf(&self) -> bool

Checks if the value of the field is ONEANDAHALF

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

impl R<u32, Reg<u32, _FRAME>>

pub fn databits(&self) -> DATABITS_R

Bits 0:3 - Data-Bit Mode

pub fn parity(&self) -> PARITY_R

Bits 8:9 - Parity-Bit Mode

pub fn stopbits(&self) -> STOPBITS_R

Bits 12:13 - Stop-Bit Mode

impl R<u8, TSEL_A>

pub fn variant(&self) -> Variant<u8, TSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _TRIGCTRL>>

pub fn rxten(&self) -> RXTEN_R

Bit 4 - Receive Trigger Enable

pub fn txten(&self) -> TXTEN_R

Bit 5 - Transmit Trigger Enable

pub fn autotxten(&self) -> AUTOTXTEN_R

Bit 6 - AUTOTX Trigger Enable

pub fn txarx0en(&self) -> TXARX0EN_R

Bit 7 - Enable Transmit Trigger After RX End of Frame Plus TCMP0VAL

pub fn txarx1en(&self) -> TXARX1EN_R

Bit 8 - Enable Transmit Trigger After RX End of Frame Plus TCMP1VAL

pub fn txarx2en(&self) -> TXARX2EN_R

Bit 9 - Enable Transmit Trigger After RX End of Frame Plus TCMP2VAL

pub fn rxatx0en(&self) -> RXATX0EN_R

Bit 10 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL0 Baud-times

pub fn rxatx1en(&self) -> RXATX1EN_R

Bit 11 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL1 Baud-times

pub fn rxatx2en(&self) -> RXATX2EN_R

Bit 12 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL2 Baud-times

pub fn tsel(&self) -> TSEL_R

Bits 16:20 - Trigger PRS Channel Select

impl R<u32, Reg<u32, _STATUS>>

pub fn rxens(&self) -> RXENS_R

Bit 0 - Receiver Enable Status

pub fn txens(&self) -> TXENS_R

Bit 1 - Transmitter Enable Status

pub fn master(&self) -> MASTER_R

Bit 2 - SPI Master Mode

pub fn rxblock(&self) -> RXBLOCK_R

Bit 3 - Block Incoming Data

pub fn txtri(&self) -> TXTRI_R

Bit 4 - Transmitter Tristated

pub fn txc(&self) -> TXC_R

Bit 5 - TX Complete

pub fn txbl(&self) -> TXBL_R

Bit 6 - TX Buffer Level

pub fn rxdatav(&self) -> RXDATAV_R

Bit 7 - RX Data Valid

pub fn rxfull(&self) -> RXFULL_R

Bit 8 - RX FIFO Full

pub fn txbdright(&self) -> TXBDRIGHT_R

Bit 9 - TX Buffer Expects Double Right Data

pub fn txbsright(&self) -> TXBSRIGHT_R

Bit 10 - TX Buffer Expects Single Right Data

pub fn rxdatavright(&self) -> RXDATAVRIGHT_R

Bit 11 - RX Data Right

pub fn rxfullright(&self) -> RXFULLRIGHT_R

Bit 12 - RX Full of Right Data

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle

pub fn timerrestarted(&self) -> TIMERRESTARTED_R

Bit 14 - The USART Timer Restarted Itself

pub fn txbufcnt(&self) -> TXBUFCNT_R

Bits 16:17 - TX Buffer Count

impl R<u32, Reg<u32, _CLKDIV>>

pub fn div(&self) -> DIV_R

Bits 3:22 - Fractional Clock Divider

pub fn autobauden(&self) -> AUTOBAUDEN_R

Bit 31 - AUTOBAUD Detection Enable

impl R<u32, Reg<u32, _RXDATAX>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:8 - RX Data

pub fn perr(&self) -> PERR_R

Bit 14 - Data Parity Error

pub fn ferr(&self) -> FERR_R

Bit 15 - Data Framing Error

impl R<u32, Reg<u32, _RXDATA>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:7 - RX Data

impl R<u32, Reg<u32, _RXDOUBLEX>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:8 - RX Data 0

pub fn perr0(&self) -> PERR0_R

Bit 14 - Data Parity Error 0

pub fn ferr0(&self) -> FERR0_R

Bit 15 - Data Framing Error 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 16:24 - RX Data 1

pub fn perr1(&self) -> PERR1_R

Bit 30 - Data Parity Error 1

pub fn ferr1(&self) -> FERR1_R

Bit 31 - Data Framing Error 1

impl R<u32, Reg<u32, _RXDOUBLE>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:7 - RX Data 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 8:15 - RX Data 1

impl R<u32, Reg<u32, _RXDATAXP>>

pub fn rxdatap(&self) -> RXDATAP_R

Bits 0:8 - RX Data Peek

pub fn perrp(&self) -> PERRP_R

Bit 14 - Data Parity Error Peek

pub fn ferrp(&self) -> FERRP_R

Bit 15 - Data Framing Error Peek

impl R<u32, Reg<u32, _RXDOUBLEXP>>

pub fn rxdatap0(&self) -> RXDATAP0_R

Bits 0:8 - RX Data 0 Peek

pub fn perrp0(&self) -> PERRP0_R

Bit 14 - Data Parity Error 0 Peek

pub fn ferrp0(&self) -> FERRP0_R

Bit 15 - Data Framing Error 0 Peek

pub fn rxdatap1(&self) -> RXDATAP1_R

Bits 16:24 - RX Data 1 Peek

pub fn perrp1(&self) -> PERRP1_R

Bit 30 - Data Parity Error 1 Peek

pub fn ferrp1(&self) -> FERRP1_R

Bit 31 - Data Framing Error 1 Peek

impl R<u32, Reg<u32, _TXDATAX>>

pub fn txdatax(&self) -> TXDATAX_R

Bits 0:8 - TX Data

pub fn ubrxat(&self) -> UBRXAT_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat(&self) -> TXTRIAT_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak(&self) -> TXBREAK_R

Bit 13 - Transmit Data as Break

pub fn txdisat(&self) -> TXDISAT_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat(&self) -> RXENAT_R

Bit 15 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDATA>>

pub fn txdata(&self) -> TXDATA_R

Bits 0:7 - TX Data

impl R<u32, Reg<u32, _TXDOUBLEX>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:8 - TX Data

pub fn ubrxat0(&self) -> UBRXAT0_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat0(&self) -> TXTRIAT0_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak0(&self) -> TXBREAK0_R

Bit 13 - Transmit Data as Break

pub fn txdisat0(&self) -> TXDISAT0_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat0(&self) -> RXENAT0_R

Bit 15 - Enable RX After Transmission

pub fn txdata1(&self) -> TXDATA1_R

Bits 16:24 - TX Data

pub fn ubrxat1(&self) -> UBRXAT1_R

Bit 27 - Unblock RX After Transmission

pub fn txtriat1(&self) -> TXTRIAT1_R

Bit 28 - Set TXTRI After Transmission

pub fn txbreak1(&self) -> TXBREAK1_R

Bit 29 - Transmit Data as Break

pub fn txdisat1(&self) -> TXDISAT1_R

Bit 30 - Clear TXEN After Transmission

pub fn rxenat1(&self) -> RXENAT1_R

Bit 31 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDOUBLE>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:7 - TX Data

pub fn txdata1(&self) -> TXDATA1_R

Bits 8:15 - TX Data

impl R<u32, Reg<u32, _IF>>

pub fn txc(&self) -> TXC_R

Bit 0 - TX Complete Interrupt Flag

pub fn txbl(&self) -> TXBL_R

Bit 1 - TX Buffer Level Interrupt Flag

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RX Data Valid Interrupt Flag

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RX Buffer Full Interrupt Flag

pub fn rxof(&self) -> RXOF_R

Bit 4 - RX Overflow Interrupt Flag

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RX Underflow Interrupt Flag

pub fn txof(&self) -> TXOF_R

Bit 6 - TX Overflow Interrupt Flag

pub fn txuf(&self) -> TXUF_R

Bit 7 - TX Underflow Interrupt Flag

pub fn perr(&self) -> PERR_R

Bit 8 - Parity Error Interrupt Flag

pub fn ferr(&self) -> FERR_R

Bit 9 - Framing Error Interrupt Flag

pub fn mpaf(&self) -> MPAF_R

Bit 10 - Multi-Processor Address Frame Interrupt Flag

pub fn ssm(&self) -> SSM_R

Bit 11 - Slave-Select in Master Mode Interrupt Flag

pub fn ccf(&self) -> CCF_R

Bit 12 - Collision Check Fail Interrupt Flag

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle Interrupt Flag

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - Timer Comparator 0 Interrupt Flag

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - Timer Comparator 1 Interrupt Flag

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - Timer Comparator 2 Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn txc(&self) -> TXC_R

Bit 0 - TXC Interrupt Enable

pub fn txbl(&self) -> TXBL_R

Bit 1 - TXBL Interrupt Enable

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RXDATAV Interrupt Enable

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RXFULL Interrupt Enable

pub fn rxof(&self) -> RXOF_R

Bit 4 - RXOF Interrupt Enable

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RXUF Interrupt Enable

pub fn txof(&self) -> TXOF_R

Bit 6 - TXOF Interrupt Enable

pub fn txuf(&self) -> TXUF_R

Bit 7 - TXUF Interrupt Enable

pub fn perr(&self) -> PERR_R

Bit 8 - PERR Interrupt Enable

pub fn ferr(&self) -> FERR_R

Bit 9 - FERR Interrupt Enable

pub fn mpaf(&self) -> MPAF_R

Bit 10 - MPAF Interrupt Enable

pub fn ssm(&self) -> SSM_R

Bit 11 - SSM Interrupt Enable

pub fn ccf(&self) -> CCF_R

Bit 12 - CCF Interrupt Enable

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TXIDLE Interrupt Enable

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - TCMP0 Interrupt Enable

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - TCMP1 Interrupt Enable

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - TCMP2 Interrupt Enable

impl R<u8, IRPW_A>

pub fn variant(&self) -> IRPW_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

impl R<u8, IRPRSSEL_A>

pub fn variant(&self) -> Variant<u8, IRPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _IRCTRL>>

pub fn iren(&self) -> IREN_R

Bit 0 - Enable IrDA Module

pub fn irpw(&self) -> IRPW_R

Bits 1:2 - IrDA TX Pulse Width

pub fn irfilt(&self) -> IRFILT_R

Bit 3 - IrDA RX Filter

pub fn irprsen(&self) -> IRPRSEN_R

Bit 7 - IrDA PRS Channel Enable

pub fn irprssel(&self) -> IRPRSSEL_R

Bits 8:12 - IrDA PRS Channel Select

impl R<u8, RXPRSSEL_A>

pub fn variant(&self) -> Variant<u8, RXPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, CLKPRSSEL_A>

pub fn variant(&self) -> Variant<u8, CLKPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _INPUT>>

pub fn rxprssel(&self) -> RXPRSSEL_R

Bits 0:4 - RX PRS Channel Select

pub fn rxprs(&self) -> RXPRS_R

Bit 7 - PRS RX Enable

pub fn clkprssel(&self) -> CLKPRSSEL_R

Bits 8:12 - CLK PRS Channel Select

pub fn clkprs(&self) -> CLKPRS_R

Bit 15 - PRS CLK Enable

impl R<u8, FORMAT_A>

pub fn variant(&self) -> FORMAT_A

Get enumerated values variant

pub fn is_w32d32(&self) -> bool

Checks if the value of the field is W32D32

pub fn is_w32d24m(&self) -> bool

Checks if the value of the field is W32D24M

pub fn is_w32d24(&self) -> bool

Checks if the value of the field is W32D24

pub fn is_w32d16(&self) -> bool

Checks if the value of the field is W32D16

pub fn is_w32d8(&self) -> bool

Checks if the value of the field is W32D8

pub fn is_w16d16(&self) -> bool

Checks if the value of the field is W16D16

pub fn is_w16d8(&self) -> bool

Checks if the value of the field is W16D8

pub fn is_w8d8(&self) -> bool

Checks if the value of the field is W8D8

impl R<u32, Reg<u32, _I2SCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable I2S Mode

pub fn mono(&self) -> MONO_R

Bit 1 - Stero or Mono

pub fn justify(&self) -> JUSTIFY_R

Bit 2 - Justification of I2S Data

pub fn dmasplit(&self) -> DMASPLIT_R

Bit 3 - Separate DMA Request for Left/Right Data

pub fn delay(&self) -> DELAY_R

Bit 4 - Delay on I2S Data

pub fn format(&self) -> FORMAT_R

Bits 8:10 - I2S Word Format

impl R<u8, TXDELAY_A>

pub fn variant(&self) -> TXDELAY_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSSETUP_A>

pub fn variant(&self) -> CSSETUP_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, ICS_A>

pub fn variant(&self) -> ICS_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSHOLD_A>

pub fn variant(&self) -> CSHOLD_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u32, Reg<u32, _TIMING>>

pub fn txdelay(&self) -> TXDELAY_R

Bits 16:18 - TX Frame Start Delay

pub fn cssetup(&self) -> CSSETUP_R

Bits 20:22 - Chip Select Setup

pub fn ics(&self) -> ICS_R

Bits 24:26 - Inter-character Spacing

pub fn cshold(&self) -> CSHOLD_R

Bits 28:30 - Chip Select Hold

impl R<u32, Reg<u32, _CTRLX>>

pub fn dbghalt(&self) -> DBGHALT_R

Bit 0 - Debug Halt

pub fn ctsinv(&self) -> CTSINV_R

Bit 1 - CTS Pin Inversion

pub fn ctsen(&self) -> CTSEN_R

Bit 2 - CTS Function Enabled

pub fn rtsinv(&self) -> RTSINV_R

Bit 3 - RTS Pin Inversion

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP0>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 0

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 0

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP0

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP1>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 1

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 1

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP1

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP2>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 2

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 2

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP2

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn rxpen(&self) -> RXPEN_R

Bit 0 - RX Pin Enable

pub fn txpen(&self) -> TXPEN_R

Bit 1 - TX Pin Enable

pub fn cspen(&self) -> CSPEN_R

Bit 2 - CS Pin Enable

pub fn clkpen(&self) -> CLKPEN_R

Bit 3 - CLK Pin Enable

pub fn ctspen(&self) -> CTSPEN_R

Bit 4 - CTS Pin Enable

pub fn rtspen(&self) -> RTSPEN_R

Bit 5 - RTS Pin Enable

impl R<u8, RXLOC_A>

pub fn variant(&self) -> Variant<u8, RXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, TXLOC_A>

pub fn variant(&self) -> Variant<u8, TXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CSLOC_A>

pub fn variant(&self) -> Variant<u8, CSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CLKLOC_A>

pub fn variant(&self) -> Variant<u8, CLKLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn rxloc(&self) -> RXLOC_R

Bits 0:5 - I/O Location

pub fn txloc(&self) -> TXLOC_R

Bits 8:13 - I/O Location

pub fn csloc(&self) -> CSLOC_R

Bits 16:21 - I/O Location

pub fn clkloc(&self) -> CLKLOC_R

Bits 24:29 - I/O Location

impl R<u8, CTSLOC_A>

pub fn variant(&self) -> Variant<u8, CTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, RTSLOC_A>

pub fn variant(&self) -> Variant<u8, RTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC1>>

pub fn ctsloc(&self) -> CTSLOC_R

Bits 0:5 - I/O Location

pub fn rtsloc(&self) -> RTSLOC_R

Bits 8:13 - I/O Location

impl R<u8, OVS_A>

pub fn variant(&self) -> OVS_A

Get enumerated values variant

pub fn is_x16(&self) -> bool

Checks if the value of the field is X16

pub fn is_x8(&self) -> bool

Checks if the value of the field is X8

pub fn is_x6(&self) -> bool

Checks if the value of the field is X6

pub fn is_x4(&self) -> bool

Checks if the value of the field is X4

impl R<u32, Reg<u32, _CTRL>>

pub fn sync(&self) -> SYNC_R

Bit 0 - USART Synchronous Mode

pub fn loopbk(&self) -> LOOPBK_R

Bit 1 - Loopback Enable

pub fn ccen(&self) -> CCEN_R

Bit 2 - Collision Check Enable

pub fn mpm(&self) -> MPM_R

Bit 3 - Multi-Processor Mode

pub fn mpab(&self) -> MPAB_R

Bit 4 - Multi-Processor Address-Bit

pub fn ovs(&self) -> OVS_R

Bits 5:6 - Oversampling

pub fn clkpol(&self) -> CLKPOL_R

Bit 8 - Clock Polarity

pub fn clkpha(&self) -> CLKPHA_R

Bit 9 - Clock Edge for Setup/Sample

pub fn msbf(&self) -> MSBF_R

Bit 10 - Most Significant Bit First

pub fn csma(&self) -> CSMA_R

Bit 11 - Action on Slave-Select in Master Mode

pub fn txbil(&self) -> TXBIL_R

Bit 12 - TX Buffer Interrupt Level

pub fn rxinv(&self) -> RXINV_R

Bit 13 - Receiver Input Invert

pub fn txinv(&self) -> TXINV_R

Bit 14 - Transmitter Output Invert

pub fn csinv(&self) -> CSINV_R

Bit 15 - Chip Select Invert

pub fn autocs(&self) -> AUTOCS_R

Bit 16 - Automatic Chip Select

pub fn autotri(&self) -> AUTOTRI_R

Bit 17 - Automatic TX Tristate

pub fn scmode(&self) -> SCMODE_R

Bit 18 - SmartCard Mode

pub fn scretrans(&self) -> SCRETRANS_R

Bit 19 - SmartCard Retransmit

pub fn skipperrf(&self) -> SKIPPERRF_R

Bit 20 - Skip Parity Error Frames

pub fn bit8dv(&self) -> BIT8DV_R

Bit 21 - Bit 8 Default Value

pub fn errsdma(&self) -> ERRSDMA_R

Bit 22 - Halt DMA on Error

pub fn errsrx(&self) -> ERRSRX_R

Bit 23 - Disable RX on Error

pub fn errstx(&self) -> ERRSTX_R

Bit 24 - Disable TX on Error

pub fn sssearly(&self) -> SSSEARLY_R

Bit 25 - Synchronous Slave Setup Early

pub fn byteswap(&self) -> BYTESWAP_R

Bit 28 - Byteswap in Double Accesses

pub fn autotx(&self) -> AUTOTX_R

Bit 29 - Always Transmit When RX Not Full

pub fn mvdis(&self) -> MVDIS_R

Bit 30 - Majority Vote Disable

pub fn smsdelay(&self) -> SMSDELAY_R

Bit 31 - Synchronous Master Sample Delay

impl R<u8, DATABITS_A>

pub fn variant(&self) -> Variant<u8, DATABITS_A>

Get enumerated values variant

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_five(&self) -> bool

Checks if the value of the field is FIVE

pub fn is_six(&self) -> bool

Checks if the value of the field is SIX

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

pub fn is_nine(&self) -> bool

Checks if the value of the field is NINE

pub fn is_ten(&self) -> bool

Checks if the value of the field is TEN

pub fn is_eleven(&self) -> bool

Checks if the value of the field is ELEVEN

pub fn is_twelve(&self) -> bool

Checks if the value of the field is TWELVE

pub fn is_thirteen(&self) -> bool

Checks if the value of the field is THIRTEEN

pub fn is_fourteen(&self) -> bool

Checks if the value of the field is FOURTEEN

pub fn is_fifteen(&self) -> bool

Checks if the value of the field is FIFTEEN

pub fn is_sixteen(&self) -> bool

Checks if the value of the field is SIXTEEN

impl R<u8, PARITY_A>

pub fn variant(&self) -> Variant<u8, PARITY_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_even(&self) -> bool

Checks if the value of the field is EVEN

pub fn is_odd(&self) -> bool

Checks if the value of the field is ODD

impl R<u8, STOPBITS_A>

pub fn variant(&self) -> STOPBITS_A

Get enumerated values variant

pub fn is_half(&self) -> bool

Checks if the value of the field is HALF

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_oneandahalf(&self) -> bool

Checks if the value of the field is ONEANDAHALF

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

impl R<u32, Reg<u32, _FRAME>>

pub fn databits(&self) -> DATABITS_R

Bits 0:3 - Data-Bit Mode

pub fn parity(&self) -> PARITY_R

Bits 8:9 - Parity-Bit Mode

pub fn stopbits(&self) -> STOPBITS_R

Bits 12:13 - Stop-Bit Mode

impl R<u8, TSEL_A>

pub fn variant(&self) -> Variant<u8, TSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _TRIGCTRL>>

pub fn rxten(&self) -> RXTEN_R

Bit 4 - Receive Trigger Enable

pub fn txten(&self) -> TXTEN_R

Bit 5 - Transmit Trigger Enable

pub fn autotxten(&self) -> AUTOTXTEN_R

Bit 6 - AUTOTX Trigger Enable

pub fn txarx0en(&self) -> TXARX0EN_R

Bit 7 - Enable Transmit Trigger After RX End of Frame Plus TCMP0VAL

pub fn txarx1en(&self) -> TXARX1EN_R

Bit 8 - Enable Transmit Trigger After RX End of Frame Plus TCMP1VAL

pub fn txarx2en(&self) -> TXARX2EN_R

Bit 9 - Enable Transmit Trigger After RX End of Frame Plus TCMP2VAL

pub fn rxatx0en(&self) -> RXATX0EN_R

Bit 10 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL0 Baud-times

pub fn rxatx1en(&self) -> RXATX1EN_R

Bit 11 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL1 Baud-times

pub fn rxatx2en(&self) -> RXATX2EN_R

Bit 12 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL2 Baud-times

pub fn tsel(&self) -> TSEL_R

Bits 16:20 - Trigger PRS Channel Select

impl R<u32, Reg<u32, _STATUS>>

pub fn rxens(&self) -> RXENS_R

Bit 0 - Receiver Enable Status

pub fn txens(&self) -> TXENS_R

Bit 1 - Transmitter Enable Status

pub fn master(&self) -> MASTER_R

Bit 2 - SPI Master Mode

pub fn rxblock(&self) -> RXBLOCK_R

Bit 3 - Block Incoming Data

pub fn txtri(&self) -> TXTRI_R

Bit 4 - Transmitter Tristated

pub fn txc(&self) -> TXC_R

Bit 5 - TX Complete

pub fn txbl(&self) -> TXBL_R

Bit 6 - TX Buffer Level

pub fn rxdatav(&self) -> RXDATAV_R

Bit 7 - RX Data Valid

pub fn rxfull(&self) -> RXFULL_R

Bit 8 - RX FIFO Full

pub fn txbdright(&self) -> TXBDRIGHT_R

Bit 9 - TX Buffer Expects Double Right Data

pub fn txbsright(&self) -> TXBSRIGHT_R

Bit 10 - TX Buffer Expects Single Right Data

pub fn rxdatavright(&self) -> RXDATAVRIGHT_R

Bit 11 - RX Data Right

pub fn rxfullright(&self) -> RXFULLRIGHT_R

Bit 12 - RX Full of Right Data

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle

pub fn timerrestarted(&self) -> TIMERRESTARTED_R

Bit 14 - The USART Timer Restarted Itself

pub fn txbufcnt(&self) -> TXBUFCNT_R

Bits 16:17 - TX Buffer Count

impl R<u32, Reg<u32, _CLKDIV>>

pub fn div(&self) -> DIV_R

Bits 3:22 - Fractional Clock Divider

pub fn autobauden(&self) -> AUTOBAUDEN_R

Bit 31 - AUTOBAUD Detection Enable

impl R<u32, Reg<u32, _RXDATAX>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:8 - RX Data

pub fn perr(&self) -> PERR_R

Bit 14 - Data Parity Error

pub fn ferr(&self) -> FERR_R

Bit 15 - Data Framing Error

impl R<u32, Reg<u32, _RXDATA>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:7 - RX Data

impl R<u32, Reg<u32, _RXDOUBLEX>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:8 - RX Data 0

pub fn perr0(&self) -> PERR0_R

Bit 14 - Data Parity Error 0

pub fn ferr0(&self) -> FERR0_R

Bit 15 - Data Framing Error 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 16:24 - RX Data 1

pub fn perr1(&self) -> PERR1_R

Bit 30 - Data Parity Error 1

pub fn ferr1(&self) -> FERR1_R

Bit 31 - Data Framing Error 1

impl R<u32, Reg<u32, _RXDOUBLE>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:7 - RX Data 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 8:15 - RX Data 1

impl R<u32, Reg<u32, _RXDATAXP>>

pub fn rxdatap(&self) -> RXDATAP_R

Bits 0:8 - RX Data Peek

pub fn perrp(&self) -> PERRP_R

Bit 14 - Data Parity Error Peek

pub fn ferrp(&self) -> FERRP_R

Bit 15 - Data Framing Error Peek

impl R<u32, Reg<u32, _RXDOUBLEXP>>

pub fn rxdatap0(&self) -> RXDATAP0_R

Bits 0:8 - RX Data 0 Peek

pub fn perrp0(&self) -> PERRP0_R

Bit 14 - Data Parity Error 0 Peek

pub fn ferrp0(&self) -> FERRP0_R

Bit 15 - Data Framing Error 0 Peek

pub fn rxdatap1(&self) -> RXDATAP1_R

Bits 16:24 - RX Data 1 Peek

pub fn perrp1(&self) -> PERRP1_R

Bit 30 - Data Parity Error 1 Peek

pub fn ferrp1(&self) -> FERRP1_R

Bit 31 - Data Framing Error 1 Peek

impl R<u32, Reg<u32, _TXDATAX>>

pub fn txdatax(&self) -> TXDATAX_R

Bits 0:8 - TX Data

pub fn ubrxat(&self) -> UBRXAT_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat(&self) -> TXTRIAT_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak(&self) -> TXBREAK_R

Bit 13 - Transmit Data as Break

pub fn txdisat(&self) -> TXDISAT_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat(&self) -> RXENAT_R

Bit 15 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDATA>>

pub fn txdata(&self) -> TXDATA_R

Bits 0:7 - TX Data

impl R<u32, Reg<u32, _TXDOUBLEX>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:8 - TX Data

pub fn ubrxat0(&self) -> UBRXAT0_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat0(&self) -> TXTRIAT0_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak0(&self) -> TXBREAK0_R

Bit 13 - Transmit Data as Break

pub fn txdisat0(&self) -> TXDISAT0_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat0(&self) -> RXENAT0_R

Bit 15 - Enable RX After Transmission

pub fn txdata1(&self) -> TXDATA1_R

Bits 16:24 - TX Data

pub fn ubrxat1(&self) -> UBRXAT1_R

Bit 27 - Unblock RX After Transmission

pub fn txtriat1(&self) -> TXTRIAT1_R

Bit 28 - Set TXTRI After Transmission

pub fn txbreak1(&self) -> TXBREAK1_R

Bit 29 - Transmit Data as Break

pub fn txdisat1(&self) -> TXDISAT1_R

Bit 30 - Clear TXEN After Transmission

pub fn rxenat1(&self) -> RXENAT1_R

Bit 31 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDOUBLE>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:7 - TX Data

pub fn txdata1(&self) -> TXDATA1_R

Bits 8:15 - TX Data

impl R<u32, Reg<u32, _IF>>

pub fn txc(&self) -> TXC_R

Bit 0 - TX Complete Interrupt Flag

pub fn txbl(&self) -> TXBL_R

Bit 1 - TX Buffer Level Interrupt Flag

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RX Data Valid Interrupt Flag

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RX Buffer Full Interrupt Flag

pub fn rxof(&self) -> RXOF_R

Bit 4 - RX Overflow Interrupt Flag

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RX Underflow Interrupt Flag

pub fn txof(&self) -> TXOF_R

Bit 6 - TX Overflow Interrupt Flag

pub fn txuf(&self) -> TXUF_R

Bit 7 - TX Underflow Interrupt Flag

pub fn perr(&self) -> PERR_R

Bit 8 - Parity Error Interrupt Flag

pub fn ferr(&self) -> FERR_R

Bit 9 - Framing Error Interrupt Flag

pub fn mpaf(&self) -> MPAF_R

Bit 10 - Multi-Processor Address Frame Interrupt Flag

pub fn ssm(&self) -> SSM_R

Bit 11 - Slave-Select in Master Mode Interrupt Flag

pub fn ccf(&self) -> CCF_R

Bit 12 - Collision Check Fail Interrupt Flag

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle Interrupt Flag

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - Timer Comparator 0 Interrupt Flag

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - Timer Comparator 1 Interrupt Flag

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - Timer Comparator 2 Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn txc(&self) -> TXC_R

Bit 0 - TXC Interrupt Enable

pub fn txbl(&self) -> TXBL_R

Bit 1 - TXBL Interrupt Enable

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RXDATAV Interrupt Enable

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RXFULL Interrupt Enable

pub fn rxof(&self) -> RXOF_R

Bit 4 - RXOF Interrupt Enable

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RXUF Interrupt Enable

pub fn txof(&self) -> TXOF_R

Bit 6 - TXOF Interrupt Enable

pub fn txuf(&self) -> TXUF_R

Bit 7 - TXUF Interrupt Enable

pub fn perr(&self) -> PERR_R

Bit 8 - PERR Interrupt Enable

pub fn ferr(&self) -> FERR_R

Bit 9 - FERR Interrupt Enable

pub fn mpaf(&self) -> MPAF_R

Bit 10 - MPAF Interrupt Enable

pub fn ssm(&self) -> SSM_R

Bit 11 - SSM Interrupt Enable

pub fn ccf(&self) -> CCF_R

Bit 12 - CCF Interrupt Enable

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TXIDLE Interrupt Enable

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - TCMP0 Interrupt Enable

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - TCMP1 Interrupt Enable

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - TCMP2 Interrupt Enable

impl R<u8, IRPW_A>

pub fn variant(&self) -> IRPW_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

impl R<u8, IRPRSSEL_A>

pub fn variant(&self) -> Variant<u8, IRPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _IRCTRL>>

pub fn iren(&self) -> IREN_R

Bit 0 - Enable IrDA Module

pub fn irpw(&self) -> IRPW_R

Bits 1:2 - IrDA TX Pulse Width

pub fn irfilt(&self) -> IRFILT_R

Bit 3 - IrDA RX Filter

pub fn irprsen(&self) -> IRPRSEN_R

Bit 7 - IrDA PRS Channel Enable

pub fn irprssel(&self) -> IRPRSSEL_R

Bits 8:12 - IrDA PRS Channel Select

impl R<u8, RXPRSSEL_A>

pub fn variant(&self) -> Variant<u8, RXPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, CLKPRSSEL_A>

pub fn variant(&self) -> Variant<u8, CLKPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _INPUT>>

pub fn rxprssel(&self) -> RXPRSSEL_R

Bits 0:4 - RX PRS Channel Select

pub fn rxprs(&self) -> RXPRS_R

Bit 7 - PRS RX Enable

pub fn clkprssel(&self) -> CLKPRSSEL_R

Bits 8:12 - CLK PRS Channel Select

pub fn clkprs(&self) -> CLKPRS_R

Bit 15 - PRS CLK Enable

impl R<u8, FORMAT_A>

pub fn variant(&self) -> FORMAT_A

Get enumerated values variant

pub fn is_w32d32(&self) -> bool

Checks if the value of the field is W32D32

pub fn is_w32d24m(&self) -> bool

Checks if the value of the field is W32D24M

pub fn is_w32d24(&self) -> bool

Checks if the value of the field is W32D24

pub fn is_w32d16(&self) -> bool

Checks if the value of the field is W32D16

pub fn is_w32d8(&self) -> bool

Checks if the value of the field is W32D8

pub fn is_w16d16(&self) -> bool

Checks if the value of the field is W16D16

pub fn is_w16d8(&self) -> bool

Checks if the value of the field is W16D8

pub fn is_w8d8(&self) -> bool

Checks if the value of the field is W8D8

impl R<u32, Reg<u32, _I2SCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable I2S Mode

pub fn mono(&self) -> MONO_R

Bit 1 - Stero or Mono

pub fn justify(&self) -> JUSTIFY_R

Bit 2 - Justification of I2S Data

pub fn dmasplit(&self) -> DMASPLIT_R

Bit 3 - Separate DMA Request for Left/Right Data

pub fn delay(&self) -> DELAY_R

Bit 4 - Delay on I2S Data

pub fn format(&self) -> FORMAT_R

Bits 8:10 - I2S Word Format

impl R<u8, TXDELAY_A>

pub fn variant(&self) -> TXDELAY_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSSETUP_A>

pub fn variant(&self) -> CSSETUP_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, ICS_A>

pub fn variant(&self) -> ICS_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSHOLD_A>

pub fn variant(&self) -> CSHOLD_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u32, Reg<u32, _TIMING>>

pub fn txdelay(&self) -> TXDELAY_R

Bits 16:18 - TX Frame Start Delay

pub fn cssetup(&self) -> CSSETUP_R

Bits 20:22 - Chip Select Setup

pub fn ics(&self) -> ICS_R

Bits 24:26 - Inter-character Spacing

pub fn cshold(&self) -> CSHOLD_R

Bits 28:30 - Chip Select Hold

impl R<u32, Reg<u32, _CTRLX>>

pub fn dbghalt(&self) -> DBGHALT_R

Bit 0 - Debug Halt

pub fn ctsinv(&self) -> CTSINV_R

Bit 1 - CTS Pin Inversion

pub fn ctsen(&self) -> CTSEN_R

Bit 2 - CTS Function Enabled

pub fn rtsinv(&self) -> RTSINV_R

Bit 3 - RTS Pin Inversion

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP0>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 0

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 0

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP0

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP1>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 1

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 1

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP1

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP2>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 2

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 2

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP2

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn rxpen(&self) -> RXPEN_R

Bit 0 - RX Pin Enable

pub fn txpen(&self) -> TXPEN_R

Bit 1 - TX Pin Enable

pub fn cspen(&self) -> CSPEN_R

Bit 2 - CS Pin Enable

pub fn clkpen(&self) -> CLKPEN_R

Bit 3 - CLK Pin Enable

pub fn ctspen(&self) -> CTSPEN_R

Bit 4 - CTS Pin Enable

pub fn rtspen(&self) -> RTSPEN_R

Bit 5 - RTS Pin Enable

impl R<u8, RXLOC_A>

pub fn variant(&self) -> Variant<u8, RXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, TXLOC_A>

pub fn variant(&self) -> Variant<u8, TXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CSLOC_A>

pub fn variant(&self) -> Variant<u8, CSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CLKLOC_A>

pub fn variant(&self) -> Variant<u8, CLKLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn rxloc(&self) -> RXLOC_R

Bits 0:5 - I/O Location

pub fn txloc(&self) -> TXLOC_R

Bits 8:13 - I/O Location

pub fn csloc(&self) -> CSLOC_R

Bits 16:21 - I/O Location

pub fn clkloc(&self) -> CLKLOC_R

Bits 24:29 - I/O Location

impl R<u8, CTSLOC_A>

pub fn variant(&self) -> Variant<u8, CTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, RTSLOC_A>

pub fn variant(&self) -> Variant<u8, RTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC1>>

pub fn ctsloc(&self) -> CTSLOC_R

Bits 0:5 - I/O Location

pub fn rtsloc(&self) -> RTSLOC_R

Bits 8:13 - I/O Location

impl R<u8, OVS_A>

pub fn variant(&self) -> OVS_A

Get enumerated values variant

pub fn is_x16(&self) -> bool

Checks if the value of the field is X16

pub fn is_x8(&self) -> bool

Checks if the value of the field is X8

pub fn is_x6(&self) -> bool

Checks if the value of the field is X6

pub fn is_x4(&self) -> bool

Checks if the value of the field is X4

impl R<u32, Reg<u32, _CTRL>>

pub fn sync(&self) -> SYNC_R

Bit 0 - USART Synchronous Mode

pub fn loopbk(&self) -> LOOPBK_R

Bit 1 - Loopback Enable

pub fn ccen(&self) -> CCEN_R

Bit 2 - Collision Check Enable

pub fn mpm(&self) -> MPM_R

Bit 3 - Multi-Processor Mode

pub fn mpab(&self) -> MPAB_R

Bit 4 - Multi-Processor Address-Bit

pub fn ovs(&self) -> OVS_R

Bits 5:6 - Oversampling

pub fn clkpol(&self) -> CLKPOL_R

Bit 8 - Clock Polarity

pub fn clkpha(&self) -> CLKPHA_R

Bit 9 - Clock Edge for Setup/Sample

pub fn msbf(&self) -> MSBF_R

Bit 10 - Most Significant Bit First

pub fn csma(&self) -> CSMA_R

Bit 11 - Action on Slave-Select in Master Mode

pub fn txbil(&self) -> TXBIL_R

Bit 12 - TX Buffer Interrupt Level

pub fn rxinv(&self) -> RXINV_R

Bit 13 - Receiver Input Invert

pub fn txinv(&self) -> TXINV_R

Bit 14 - Transmitter Output Invert

pub fn csinv(&self) -> CSINV_R

Bit 15 - Chip Select Invert

pub fn autocs(&self) -> AUTOCS_R

Bit 16 - Automatic Chip Select

pub fn autotri(&self) -> AUTOTRI_R

Bit 17 - Automatic TX Tristate

pub fn scmode(&self) -> SCMODE_R

Bit 18 - SmartCard Mode

pub fn scretrans(&self) -> SCRETRANS_R

Bit 19 - SmartCard Retransmit

pub fn skipperrf(&self) -> SKIPPERRF_R

Bit 20 - Skip Parity Error Frames

pub fn bit8dv(&self) -> BIT8DV_R

Bit 21 - Bit 8 Default Value

pub fn errsdma(&self) -> ERRSDMA_R

Bit 22 - Halt DMA on Error

pub fn errsrx(&self) -> ERRSRX_R

Bit 23 - Disable RX on Error

pub fn errstx(&self) -> ERRSTX_R

Bit 24 - Disable TX on Error

pub fn sssearly(&self) -> SSSEARLY_R

Bit 25 - Synchronous Slave Setup Early

pub fn byteswap(&self) -> BYTESWAP_R

Bit 28 - Byteswap in Double Accesses

pub fn autotx(&self) -> AUTOTX_R

Bit 29 - Always Transmit When RX Not Full

pub fn mvdis(&self) -> MVDIS_R

Bit 30 - Majority Vote Disable

pub fn smsdelay(&self) -> SMSDELAY_R

Bit 31 - Synchronous Master Sample Delay

impl R<u8, DATABITS_A>

pub fn variant(&self) -> Variant<u8, DATABITS_A>

Get enumerated values variant

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_five(&self) -> bool

Checks if the value of the field is FIVE

pub fn is_six(&self) -> bool

Checks if the value of the field is SIX

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

pub fn is_nine(&self) -> bool

Checks if the value of the field is NINE

pub fn is_ten(&self) -> bool

Checks if the value of the field is TEN

pub fn is_eleven(&self) -> bool

Checks if the value of the field is ELEVEN

pub fn is_twelve(&self) -> bool

Checks if the value of the field is TWELVE

pub fn is_thirteen(&self) -> bool

Checks if the value of the field is THIRTEEN

pub fn is_fourteen(&self) -> bool

Checks if the value of the field is FOURTEEN

pub fn is_fifteen(&self) -> bool

Checks if the value of the field is FIFTEEN

pub fn is_sixteen(&self) -> bool

Checks if the value of the field is SIXTEEN

impl R<u8, PARITY_A>

pub fn variant(&self) -> Variant<u8, PARITY_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_even(&self) -> bool

Checks if the value of the field is EVEN

pub fn is_odd(&self) -> bool

Checks if the value of the field is ODD

impl R<u8, STOPBITS_A>

pub fn variant(&self) -> STOPBITS_A

Get enumerated values variant

pub fn is_half(&self) -> bool

Checks if the value of the field is HALF

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_oneandahalf(&self) -> bool

Checks if the value of the field is ONEANDAHALF

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

impl R<u32, Reg<u32, _FRAME>>

pub fn databits(&self) -> DATABITS_R

Bits 0:3 - Data-Bit Mode

pub fn parity(&self) -> PARITY_R

Bits 8:9 - Parity-Bit Mode

pub fn stopbits(&self) -> STOPBITS_R

Bits 12:13 - Stop-Bit Mode

impl R<u8, TSEL_A>

pub fn variant(&self) -> Variant<u8, TSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _TRIGCTRL>>

pub fn rxten(&self) -> RXTEN_R

Bit 4 - Receive Trigger Enable

pub fn txten(&self) -> TXTEN_R

Bit 5 - Transmit Trigger Enable

pub fn autotxten(&self) -> AUTOTXTEN_R

Bit 6 - AUTOTX Trigger Enable

pub fn txarx0en(&self) -> TXARX0EN_R

Bit 7 - Enable Transmit Trigger After RX End of Frame Plus TCMP0VAL

pub fn txarx1en(&self) -> TXARX1EN_R

Bit 8 - Enable Transmit Trigger After RX End of Frame Plus TCMP1VAL

pub fn txarx2en(&self) -> TXARX2EN_R

Bit 9 - Enable Transmit Trigger After RX End of Frame Plus TCMP2VAL

pub fn rxatx0en(&self) -> RXATX0EN_R

Bit 10 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL0 Baud-times

pub fn rxatx1en(&self) -> RXATX1EN_R

Bit 11 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL1 Baud-times

pub fn rxatx2en(&self) -> RXATX2EN_R

Bit 12 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL2 Baud-times

pub fn tsel(&self) -> TSEL_R

Bits 16:20 - Trigger PRS Channel Select

impl R<u32, Reg<u32, _STATUS>>

pub fn rxens(&self) -> RXENS_R

Bit 0 - Receiver Enable Status

pub fn txens(&self) -> TXENS_R

Bit 1 - Transmitter Enable Status

pub fn master(&self) -> MASTER_R

Bit 2 - SPI Master Mode

pub fn rxblock(&self) -> RXBLOCK_R

Bit 3 - Block Incoming Data

pub fn txtri(&self) -> TXTRI_R

Bit 4 - Transmitter Tristated

pub fn txc(&self) -> TXC_R

Bit 5 - TX Complete

pub fn txbl(&self) -> TXBL_R

Bit 6 - TX Buffer Level

pub fn rxdatav(&self) -> RXDATAV_R

Bit 7 - RX Data Valid

pub fn rxfull(&self) -> RXFULL_R

Bit 8 - RX FIFO Full

pub fn txbdright(&self) -> TXBDRIGHT_R

Bit 9 - TX Buffer Expects Double Right Data

pub fn txbsright(&self) -> TXBSRIGHT_R

Bit 10 - TX Buffer Expects Single Right Data

pub fn rxdatavright(&self) -> RXDATAVRIGHT_R

Bit 11 - RX Data Right

pub fn rxfullright(&self) -> RXFULLRIGHT_R

Bit 12 - RX Full of Right Data

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle

pub fn timerrestarted(&self) -> TIMERRESTARTED_R

Bit 14 - The USART Timer Restarted Itself

pub fn txbufcnt(&self) -> TXBUFCNT_R

Bits 16:17 - TX Buffer Count

impl R<u32, Reg<u32, _CLKDIV>>

pub fn div(&self) -> DIV_R

Bits 3:22 - Fractional Clock Divider

pub fn autobauden(&self) -> AUTOBAUDEN_R

Bit 31 - AUTOBAUD Detection Enable

impl R<u32, Reg<u32, _RXDATAX>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:8 - RX Data

pub fn perr(&self) -> PERR_R

Bit 14 - Data Parity Error

pub fn ferr(&self) -> FERR_R

Bit 15 - Data Framing Error

impl R<u32, Reg<u32, _RXDATA>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:7 - RX Data

impl R<u32, Reg<u32, _RXDOUBLEX>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:8 - RX Data 0

pub fn perr0(&self) -> PERR0_R

Bit 14 - Data Parity Error 0

pub fn ferr0(&self) -> FERR0_R

Bit 15 - Data Framing Error 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 16:24 - RX Data 1

pub fn perr1(&self) -> PERR1_R

Bit 30 - Data Parity Error 1

pub fn ferr1(&self) -> FERR1_R

Bit 31 - Data Framing Error 1

impl R<u32, Reg<u32, _RXDOUBLE>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:7 - RX Data 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 8:15 - RX Data 1

impl R<u32, Reg<u32, _RXDATAXP>>

pub fn rxdatap(&self) -> RXDATAP_R

Bits 0:8 - RX Data Peek

pub fn perrp(&self) -> PERRP_R

Bit 14 - Data Parity Error Peek

pub fn ferrp(&self) -> FERRP_R

Bit 15 - Data Framing Error Peek

impl R<u32, Reg<u32, _RXDOUBLEXP>>

pub fn rxdatap0(&self) -> RXDATAP0_R

Bits 0:8 - RX Data 0 Peek

pub fn perrp0(&self) -> PERRP0_R

Bit 14 - Data Parity Error 0 Peek

pub fn ferrp0(&self) -> FERRP0_R

Bit 15 - Data Framing Error 0 Peek

pub fn rxdatap1(&self) -> RXDATAP1_R

Bits 16:24 - RX Data 1 Peek

pub fn perrp1(&self) -> PERRP1_R

Bit 30 - Data Parity Error 1 Peek

pub fn ferrp1(&self) -> FERRP1_R

Bit 31 - Data Framing Error 1 Peek

impl R<u32, Reg<u32, _TXDATAX>>

pub fn txdatax(&self) -> TXDATAX_R

Bits 0:8 - TX Data

pub fn ubrxat(&self) -> UBRXAT_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat(&self) -> TXTRIAT_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak(&self) -> TXBREAK_R

Bit 13 - Transmit Data as Break

pub fn txdisat(&self) -> TXDISAT_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat(&self) -> RXENAT_R

Bit 15 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDATA>>

pub fn txdata(&self) -> TXDATA_R

Bits 0:7 - TX Data

impl R<u32, Reg<u32, _TXDOUBLEX>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:8 - TX Data

pub fn ubrxat0(&self) -> UBRXAT0_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat0(&self) -> TXTRIAT0_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak0(&self) -> TXBREAK0_R

Bit 13 - Transmit Data as Break

pub fn txdisat0(&self) -> TXDISAT0_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat0(&self) -> RXENAT0_R

Bit 15 - Enable RX After Transmission

pub fn txdata1(&self) -> TXDATA1_R

Bits 16:24 - TX Data

pub fn ubrxat1(&self) -> UBRXAT1_R

Bit 27 - Unblock RX After Transmission

pub fn txtriat1(&self) -> TXTRIAT1_R

Bit 28 - Set TXTRI After Transmission

pub fn txbreak1(&self) -> TXBREAK1_R

Bit 29 - Transmit Data as Break

pub fn txdisat1(&self) -> TXDISAT1_R

Bit 30 - Clear TXEN After Transmission

pub fn rxenat1(&self) -> RXENAT1_R

Bit 31 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDOUBLE>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:7 - TX Data

pub fn txdata1(&self) -> TXDATA1_R

Bits 8:15 - TX Data

impl R<u32, Reg<u32, _IF>>

pub fn txc(&self) -> TXC_R

Bit 0 - TX Complete Interrupt Flag

pub fn txbl(&self) -> TXBL_R

Bit 1 - TX Buffer Level Interrupt Flag

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RX Data Valid Interrupt Flag

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RX Buffer Full Interrupt Flag

pub fn rxof(&self) -> RXOF_R

Bit 4 - RX Overflow Interrupt Flag

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RX Underflow Interrupt Flag

pub fn txof(&self) -> TXOF_R

Bit 6 - TX Overflow Interrupt Flag

pub fn txuf(&self) -> TXUF_R

Bit 7 - TX Underflow Interrupt Flag

pub fn perr(&self) -> PERR_R

Bit 8 - Parity Error Interrupt Flag

pub fn ferr(&self) -> FERR_R

Bit 9 - Framing Error Interrupt Flag

pub fn mpaf(&self) -> MPAF_R

Bit 10 - Multi-Processor Address Frame Interrupt Flag

pub fn ssm(&self) -> SSM_R

Bit 11 - Slave-Select in Master Mode Interrupt Flag

pub fn ccf(&self) -> CCF_R

Bit 12 - Collision Check Fail Interrupt Flag

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle Interrupt Flag

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - Timer Comparator 0 Interrupt Flag

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - Timer Comparator 1 Interrupt Flag

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - Timer Comparator 2 Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn txc(&self) -> TXC_R

Bit 0 - TXC Interrupt Enable

pub fn txbl(&self) -> TXBL_R

Bit 1 - TXBL Interrupt Enable

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RXDATAV Interrupt Enable

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RXFULL Interrupt Enable

pub fn rxof(&self) -> RXOF_R

Bit 4 - RXOF Interrupt Enable

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RXUF Interrupt Enable

pub fn txof(&self) -> TXOF_R

Bit 6 - TXOF Interrupt Enable

pub fn txuf(&self) -> TXUF_R

Bit 7 - TXUF Interrupt Enable

pub fn perr(&self) -> PERR_R

Bit 8 - PERR Interrupt Enable

pub fn ferr(&self) -> FERR_R

Bit 9 - FERR Interrupt Enable

pub fn mpaf(&self) -> MPAF_R

Bit 10 - MPAF Interrupt Enable

pub fn ssm(&self) -> SSM_R

Bit 11 - SSM Interrupt Enable

pub fn ccf(&self) -> CCF_R

Bit 12 - CCF Interrupt Enable

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TXIDLE Interrupt Enable

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - TCMP0 Interrupt Enable

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - TCMP1 Interrupt Enable

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - TCMP2 Interrupt Enable

impl R<u8, IRPW_A>

pub fn variant(&self) -> IRPW_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

impl R<u8, IRPRSSEL_A>

pub fn variant(&self) -> Variant<u8, IRPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _IRCTRL>>

pub fn iren(&self) -> IREN_R

Bit 0 - Enable IrDA Module

pub fn irpw(&self) -> IRPW_R

Bits 1:2 - IrDA TX Pulse Width

pub fn irfilt(&self) -> IRFILT_R

Bit 3 - IrDA RX Filter

pub fn irprsen(&self) -> IRPRSEN_R

Bit 7 - IrDA PRS Channel Enable

pub fn irprssel(&self) -> IRPRSSEL_R

Bits 8:12 - IrDA PRS Channel Select

impl R<u8, RXPRSSEL_A>

pub fn variant(&self) -> Variant<u8, RXPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, CLKPRSSEL_A>

pub fn variant(&self) -> Variant<u8, CLKPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _INPUT>>

pub fn rxprssel(&self) -> RXPRSSEL_R

Bits 0:4 - RX PRS Channel Select

pub fn rxprs(&self) -> RXPRS_R

Bit 7 - PRS RX Enable

pub fn clkprssel(&self) -> CLKPRSSEL_R

Bits 8:12 - CLK PRS Channel Select

pub fn clkprs(&self) -> CLKPRS_R

Bit 15 - PRS CLK Enable

impl R<u8, FORMAT_A>

pub fn variant(&self) -> FORMAT_A

Get enumerated values variant

pub fn is_w32d32(&self) -> bool

Checks if the value of the field is W32D32

pub fn is_w32d24m(&self) -> bool

Checks if the value of the field is W32D24M

pub fn is_w32d24(&self) -> bool

Checks if the value of the field is W32D24

pub fn is_w32d16(&self) -> bool

Checks if the value of the field is W32D16

pub fn is_w32d8(&self) -> bool

Checks if the value of the field is W32D8

pub fn is_w16d16(&self) -> bool

Checks if the value of the field is W16D16

pub fn is_w16d8(&self) -> bool

Checks if the value of the field is W16D8

pub fn is_w8d8(&self) -> bool

Checks if the value of the field is W8D8

impl R<u32, Reg<u32, _I2SCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable I2S Mode

pub fn mono(&self) -> MONO_R

Bit 1 - Stero or Mono

pub fn justify(&self) -> JUSTIFY_R

Bit 2 - Justification of I2S Data

pub fn dmasplit(&self) -> DMASPLIT_R

Bit 3 - Separate DMA Request for Left/Right Data

pub fn delay(&self) -> DELAY_R

Bit 4 - Delay on I2S Data

pub fn format(&self) -> FORMAT_R

Bits 8:10 - I2S Word Format

impl R<u8, TXDELAY_A>

pub fn variant(&self) -> TXDELAY_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSSETUP_A>

pub fn variant(&self) -> CSSETUP_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, ICS_A>

pub fn variant(&self) -> ICS_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSHOLD_A>

pub fn variant(&self) -> CSHOLD_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u32, Reg<u32, _TIMING>>

pub fn txdelay(&self) -> TXDELAY_R

Bits 16:18 - TX Frame Start Delay

pub fn cssetup(&self) -> CSSETUP_R

Bits 20:22 - Chip Select Setup

pub fn ics(&self) -> ICS_R

Bits 24:26 - Inter-character Spacing

pub fn cshold(&self) -> CSHOLD_R

Bits 28:30 - Chip Select Hold

impl R<u32, Reg<u32, _CTRLX>>

pub fn dbghalt(&self) -> DBGHALT_R

Bit 0 - Debug Halt

pub fn ctsinv(&self) -> CTSINV_R

Bit 1 - CTS Pin Inversion

pub fn ctsen(&self) -> CTSEN_R

Bit 2 - CTS Function Enabled

pub fn rtsinv(&self) -> RTSINV_R

Bit 3 - RTS Pin Inversion

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP0>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 0

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 0

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP0

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP1>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 1

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 1

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP1

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP2>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 2

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 2

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP2

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn rxpen(&self) -> RXPEN_R

Bit 0 - RX Pin Enable

pub fn txpen(&self) -> TXPEN_R

Bit 1 - TX Pin Enable

pub fn cspen(&self) -> CSPEN_R

Bit 2 - CS Pin Enable

pub fn clkpen(&self) -> CLKPEN_R

Bit 3 - CLK Pin Enable

pub fn ctspen(&self) -> CTSPEN_R

Bit 4 - CTS Pin Enable

pub fn rtspen(&self) -> RTSPEN_R

Bit 5 - RTS Pin Enable

impl R<u8, RXLOC_A>

pub fn variant(&self) -> Variant<u8, RXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, TXLOC_A>

pub fn variant(&self) -> Variant<u8, TXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CSLOC_A>

pub fn variant(&self) -> Variant<u8, CSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CLKLOC_A>

pub fn variant(&self) -> Variant<u8, CLKLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn rxloc(&self) -> RXLOC_R

Bits 0:5 - I/O Location

pub fn txloc(&self) -> TXLOC_R

Bits 8:13 - I/O Location

pub fn csloc(&self) -> CSLOC_R

Bits 16:21 - I/O Location

pub fn clkloc(&self) -> CLKLOC_R

Bits 24:29 - I/O Location

impl R<u8, CTSLOC_A>

pub fn variant(&self) -> Variant<u8, CTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, RTSLOC_A>

pub fn variant(&self) -> Variant<u8, RTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC1>>

pub fn ctsloc(&self) -> CTSLOC_R

Bits 0:5 - I/O Location

pub fn rtsloc(&self) -> RTSLOC_R

Bits 8:13 - I/O Location

impl R<u8, OVS_A>

pub fn variant(&self) -> OVS_A

Get enumerated values variant

pub fn is_x16(&self) -> bool

Checks if the value of the field is X16

pub fn is_x8(&self) -> bool

Checks if the value of the field is X8

pub fn is_x6(&self) -> bool

Checks if the value of the field is X6

pub fn is_x4(&self) -> bool

Checks if the value of the field is X4

impl R<u32, Reg<u32, _CTRL>>

pub fn sync(&self) -> SYNC_R

Bit 0 - USART Synchronous Mode

pub fn loopbk(&self) -> LOOPBK_R

Bit 1 - Loopback Enable

pub fn ccen(&self) -> CCEN_R

Bit 2 - Collision Check Enable

pub fn mpm(&self) -> MPM_R

Bit 3 - Multi-Processor Mode

pub fn mpab(&self) -> MPAB_R

Bit 4 - Multi-Processor Address-Bit

pub fn ovs(&self) -> OVS_R

Bits 5:6 - Oversampling

pub fn clkpol(&self) -> CLKPOL_R

Bit 8 - Clock Polarity

pub fn clkpha(&self) -> CLKPHA_R

Bit 9 - Clock Edge for Setup/Sample

pub fn msbf(&self) -> MSBF_R

Bit 10 - Most Significant Bit First

pub fn csma(&self) -> CSMA_R

Bit 11 - Action on Slave-Select in Master Mode

pub fn txbil(&self) -> TXBIL_R

Bit 12 - TX Buffer Interrupt Level

pub fn rxinv(&self) -> RXINV_R

Bit 13 - Receiver Input Invert

pub fn txinv(&self) -> TXINV_R

Bit 14 - Transmitter Output Invert

pub fn csinv(&self) -> CSINV_R

Bit 15 - Chip Select Invert

pub fn autocs(&self) -> AUTOCS_R

Bit 16 - Automatic Chip Select

pub fn autotri(&self) -> AUTOTRI_R

Bit 17 - Automatic TX Tristate

pub fn scmode(&self) -> SCMODE_R

Bit 18 - SmartCard Mode

pub fn scretrans(&self) -> SCRETRANS_R

Bit 19 - SmartCard Retransmit

pub fn skipperrf(&self) -> SKIPPERRF_R

Bit 20 - Skip Parity Error Frames

pub fn bit8dv(&self) -> BIT8DV_R

Bit 21 - Bit 8 Default Value

pub fn errsdma(&self) -> ERRSDMA_R

Bit 22 - Halt DMA on Error

pub fn errsrx(&self) -> ERRSRX_R

Bit 23 - Disable RX on Error

pub fn errstx(&self) -> ERRSTX_R

Bit 24 - Disable TX on Error

pub fn sssearly(&self) -> SSSEARLY_R

Bit 25 - Synchronous Slave Setup Early

pub fn byteswap(&self) -> BYTESWAP_R

Bit 28 - Byteswap in Double Accesses

pub fn autotx(&self) -> AUTOTX_R

Bit 29 - Always Transmit When RX Not Full

pub fn mvdis(&self) -> MVDIS_R

Bit 30 - Majority Vote Disable

pub fn smsdelay(&self) -> SMSDELAY_R

Bit 31 - Synchronous Master Sample Delay

impl R<u8, DATABITS_A>

pub fn variant(&self) -> Variant<u8, DATABITS_A>

Get enumerated values variant

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_five(&self) -> bool

Checks if the value of the field is FIVE

pub fn is_six(&self) -> bool

Checks if the value of the field is SIX

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

pub fn is_nine(&self) -> bool

Checks if the value of the field is NINE

pub fn is_ten(&self) -> bool

Checks if the value of the field is TEN

pub fn is_eleven(&self) -> bool

Checks if the value of the field is ELEVEN

pub fn is_twelve(&self) -> bool

Checks if the value of the field is TWELVE

pub fn is_thirteen(&self) -> bool

Checks if the value of the field is THIRTEEN

pub fn is_fourteen(&self) -> bool

Checks if the value of the field is FOURTEEN

pub fn is_fifteen(&self) -> bool

Checks if the value of the field is FIFTEEN

pub fn is_sixteen(&self) -> bool

Checks if the value of the field is SIXTEEN

impl R<u8, PARITY_A>

pub fn variant(&self) -> Variant<u8, PARITY_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_even(&self) -> bool

Checks if the value of the field is EVEN

pub fn is_odd(&self) -> bool

Checks if the value of the field is ODD

impl R<u8, STOPBITS_A>

pub fn variant(&self) -> STOPBITS_A

Get enumerated values variant

pub fn is_half(&self) -> bool

Checks if the value of the field is HALF

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_oneandahalf(&self) -> bool

Checks if the value of the field is ONEANDAHALF

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

impl R<u32, Reg<u32, _FRAME>>

pub fn databits(&self) -> DATABITS_R

Bits 0:3 - Data-Bit Mode

pub fn parity(&self) -> PARITY_R

Bits 8:9 - Parity-Bit Mode

pub fn stopbits(&self) -> STOPBITS_R

Bits 12:13 - Stop-Bit Mode

impl R<u8, TSEL_A>

pub fn variant(&self) -> Variant<u8, TSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _TRIGCTRL>>

pub fn rxten(&self) -> RXTEN_R

Bit 4 - Receive Trigger Enable

pub fn txten(&self) -> TXTEN_R

Bit 5 - Transmit Trigger Enable

pub fn autotxten(&self) -> AUTOTXTEN_R

Bit 6 - AUTOTX Trigger Enable

pub fn txarx0en(&self) -> TXARX0EN_R

Bit 7 - Enable Transmit Trigger After RX End of Frame Plus TCMP0VAL

pub fn txarx1en(&self) -> TXARX1EN_R

Bit 8 - Enable Transmit Trigger After RX End of Frame Plus TCMP1VAL

pub fn txarx2en(&self) -> TXARX2EN_R

Bit 9 - Enable Transmit Trigger After RX End of Frame Plus TCMP2VAL

pub fn rxatx0en(&self) -> RXATX0EN_R

Bit 10 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL0 Baud-times

pub fn rxatx1en(&self) -> RXATX1EN_R

Bit 11 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL1 Baud-times

pub fn rxatx2en(&self) -> RXATX2EN_R

Bit 12 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL2 Baud-times

pub fn tsel(&self) -> TSEL_R

Bits 16:20 - Trigger PRS Channel Select

impl R<u32, Reg<u32, _STATUS>>

pub fn rxens(&self) -> RXENS_R

Bit 0 - Receiver Enable Status

pub fn txens(&self) -> TXENS_R

Bit 1 - Transmitter Enable Status

pub fn master(&self) -> MASTER_R

Bit 2 - SPI Master Mode

pub fn rxblock(&self) -> RXBLOCK_R

Bit 3 - Block Incoming Data

pub fn txtri(&self) -> TXTRI_R

Bit 4 - Transmitter Tristated

pub fn txc(&self) -> TXC_R

Bit 5 - TX Complete

pub fn txbl(&self) -> TXBL_R

Bit 6 - TX Buffer Level

pub fn rxdatav(&self) -> RXDATAV_R

Bit 7 - RX Data Valid

pub fn rxfull(&self) -> RXFULL_R

Bit 8 - RX FIFO Full

pub fn txbdright(&self) -> TXBDRIGHT_R

Bit 9 - TX Buffer Expects Double Right Data

pub fn txbsright(&self) -> TXBSRIGHT_R

Bit 10 - TX Buffer Expects Single Right Data

pub fn rxdatavright(&self) -> RXDATAVRIGHT_R

Bit 11 - RX Data Right

pub fn rxfullright(&self) -> RXFULLRIGHT_R

Bit 12 - RX Full of Right Data

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle

pub fn timerrestarted(&self) -> TIMERRESTARTED_R

Bit 14 - The USART Timer Restarted Itself

pub fn txbufcnt(&self) -> TXBUFCNT_R

Bits 16:17 - TX Buffer Count

impl R<u32, Reg<u32, _CLKDIV>>

pub fn div(&self) -> DIV_R

Bits 3:22 - Fractional Clock Divider

pub fn autobauden(&self) -> AUTOBAUDEN_R

Bit 31 - AUTOBAUD Detection Enable

impl R<u32, Reg<u32, _RXDATAX>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:8 - RX Data

pub fn perr(&self) -> PERR_R

Bit 14 - Data Parity Error

pub fn ferr(&self) -> FERR_R

Bit 15 - Data Framing Error

impl R<u32, Reg<u32, _RXDATA>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:7 - RX Data

impl R<u32, Reg<u32, _RXDOUBLEX>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:8 - RX Data 0

pub fn perr0(&self) -> PERR0_R

Bit 14 - Data Parity Error 0

pub fn ferr0(&self) -> FERR0_R

Bit 15 - Data Framing Error 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 16:24 - RX Data 1

pub fn perr1(&self) -> PERR1_R

Bit 30 - Data Parity Error 1

pub fn ferr1(&self) -> FERR1_R

Bit 31 - Data Framing Error 1

impl R<u32, Reg<u32, _RXDOUBLE>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:7 - RX Data 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 8:15 - RX Data 1

impl R<u32, Reg<u32, _RXDATAXP>>

pub fn rxdatap(&self) -> RXDATAP_R

Bits 0:8 - RX Data Peek

pub fn perrp(&self) -> PERRP_R

Bit 14 - Data Parity Error Peek

pub fn ferrp(&self) -> FERRP_R

Bit 15 - Data Framing Error Peek

impl R<u32, Reg<u32, _RXDOUBLEXP>>

pub fn rxdatap0(&self) -> RXDATAP0_R

Bits 0:8 - RX Data 0 Peek

pub fn perrp0(&self) -> PERRP0_R

Bit 14 - Data Parity Error 0 Peek

pub fn ferrp0(&self) -> FERRP0_R

Bit 15 - Data Framing Error 0 Peek

pub fn rxdatap1(&self) -> RXDATAP1_R

Bits 16:24 - RX Data 1 Peek

pub fn perrp1(&self) -> PERRP1_R

Bit 30 - Data Parity Error 1 Peek

pub fn ferrp1(&self) -> FERRP1_R

Bit 31 - Data Framing Error 1 Peek

impl R<u32, Reg<u32, _TXDATAX>>

pub fn txdatax(&self) -> TXDATAX_R

Bits 0:8 - TX Data

pub fn ubrxat(&self) -> UBRXAT_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat(&self) -> TXTRIAT_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak(&self) -> TXBREAK_R

Bit 13 - Transmit Data as Break

pub fn txdisat(&self) -> TXDISAT_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat(&self) -> RXENAT_R

Bit 15 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDATA>>

pub fn txdata(&self) -> TXDATA_R

Bits 0:7 - TX Data

impl R<u32, Reg<u32, _TXDOUBLEX>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:8 - TX Data

pub fn ubrxat0(&self) -> UBRXAT0_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat0(&self) -> TXTRIAT0_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak0(&self) -> TXBREAK0_R

Bit 13 - Transmit Data as Break

pub fn txdisat0(&self) -> TXDISAT0_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat0(&self) -> RXENAT0_R

Bit 15 - Enable RX After Transmission

pub fn txdata1(&self) -> TXDATA1_R

Bits 16:24 - TX Data

pub fn ubrxat1(&self) -> UBRXAT1_R

Bit 27 - Unblock RX After Transmission

pub fn txtriat1(&self) -> TXTRIAT1_R

Bit 28 - Set TXTRI After Transmission

pub fn txbreak1(&self) -> TXBREAK1_R

Bit 29 - Transmit Data as Break

pub fn txdisat1(&self) -> TXDISAT1_R

Bit 30 - Clear TXEN After Transmission

pub fn rxenat1(&self) -> RXENAT1_R

Bit 31 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDOUBLE>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:7 - TX Data

pub fn txdata1(&self) -> TXDATA1_R

Bits 8:15 - TX Data

impl R<u32, Reg<u32, _IF>>

pub fn txc(&self) -> TXC_R

Bit 0 - TX Complete Interrupt Flag

pub fn txbl(&self) -> TXBL_R

Bit 1 - TX Buffer Level Interrupt Flag

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RX Data Valid Interrupt Flag

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RX Buffer Full Interrupt Flag

pub fn rxof(&self) -> RXOF_R

Bit 4 - RX Overflow Interrupt Flag

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RX Underflow Interrupt Flag

pub fn txof(&self) -> TXOF_R

Bit 6 - TX Overflow Interrupt Flag

pub fn txuf(&self) -> TXUF_R

Bit 7 - TX Underflow Interrupt Flag

pub fn perr(&self) -> PERR_R

Bit 8 - Parity Error Interrupt Flag

pub fn ferr(&self) -> FERR_R

Bit 9 - Framing Error Interrupt Flag

pub fn mpaf(&self) -> MPAF_R

Bit 10 - Multi-Processor Address Frame Interrupt Flag

pub fn ssm(&self) -> SSM_R

Bit 11 - Slave-Select in Master Mode Interrupt Flag

pub fn ccf(&self) -> CCF_R

Bit 12 - Collision Check Fail Interrupt Flag

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle Interrupt Flag

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - Timer Comparator 0 Interrupt Flag

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - Timer Comparator 1 Interrupt Flag

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - Timer Comparator 2 Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn txc(&self) -> TXC_R

Bit 0 - TXC Interrupt Enable

pub fn txbl(&self) -> TXBL_R

Bit 1 - TXBL Interrupt Enable

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RXDATAV Interrupt Enable

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RXFULL Interrupt Enable

pub fn rxof(&self) -> RXOF_R

Bit 4 - RXOF Interrupt Enable

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RXUF Interrupt Enable

pub fn txof(&self) -> TXOF_R

Bit 6 - TXOF Interrupt Enable

pub fn txuf(&self) -> TXUF_R

Bit 7 - TXUF Interrupt Enable

pub fn perr(&self) -> PERR_R

Bit 8 - PERR Interrupt Enable

pub fn ferr(&self) -> FERR_R

Bit 9 - FERR Interrupt Enable

pub fn mpaf(&self) -> MPAF_R

Bit 10 - MPAF Interrupt Enable

pub fn ssm(&self) -> SSM_R

Bit 11 - SSM Interrupt Enable

pub fn ccf(&self) -> CCF_R

Bit 12 - CCF Interrupt Enable

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TXIDLE Interrupt Enable

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - TCMP0 Interrupt Enable

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - TCMP1 Interrupt Enable

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - TCMP2 Interrupt Enable

impl R<u8, IRPW_A>

pub fn variant(&self) -> IRPW_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

impl R<u8, IRPRSSEL_A>

pub fn variant(&self) -> Variant<u8, IRPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _IRCTRL>>

pub fn iren(&self) -> IREN_R

Bit 0 - Enable IrDA Module

pub fn irpw(&self) -> IRPW_R

Bits 1:2 - IrDA TX Pulse Width

pub fn irfilt(&self) -> IRFILT_R

Bit 3 - IrDA RX Filter

pub fn irprsen(&self) -> IRPRSEN_R

Bit 7 - IrDA PRS Channel Enable

pub fn irprssel(&self) -> IRPRSSEL_R

Bits 8:12 - IrDA PRS Channel Select

impl R<u8, RXPRSSEL_A>

pub fn variant(&self) -> Variant<u8, RXPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, CLKPRSSEL_A>

pub fn variant(&self) -> Variant<u8, CLKPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _INPUT>>

pub fn rxprssel(&self) -> RXPRSSEL_R

Bits 0:4 - RX PRS Channel Select

pub fn rxprs(&self) -> RXPRS_R

Bit 7 - PRS RX Enable

pub fn clkprssel(&self) -> CLKPRSSEL_R

Bits 8:12 - CLK PRS Channel Select

pub fn clkprs(&self) -> CLKPRS_R

Bit 15 - PRS CLK Enable

impl R<u8, FORMAT_A>

pub fn variant(&self) -> FORMAT_A

Get enumerated values variant

pub fn is_w32d32(&self) -> bool

Checks if the value of the field is W32D32

pub fn is_w32d24m(&self) -> bool

Checks if the value of the field is W32D24M

pub fn is_w32d24(&self) -> bool

Checks if the value of the field is W32D24

pub fn is_w32d16(&self) -> bool

Checks if the value of the field is W32D16

pub fn is_w32d8(&self) -> bool

Checks if the value of the field is W32D8

pub fn is_w16d16(&self) -> bool

Checks if the value of the field is W16D16

pub fn is_w16d8(&self) -> bool

Checks if the value of the field is W16D8

pub fn is_w8d8(&self) -> bool

Checks if the value of the field is W8D8

impl R<u32, Reg<u32, _I2SCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable I2S Mode

pub fn mono(&self) -> MONO_R

Bit 1 - Stero or Mono

pub fn justify(&self) -> JUSTIFY_R

Bit 2 - Justification of I2S Data

pub fn dmasplit(&self) -> DMASPLIT_R

Bit 3 - Separate DMA Request for Left/Right Data

pub fn delay(&self) -> DELAY_R

Bit 4 - Delay on I2S Data

pub fn format(&self) -> FORMAT_R

Bits 8:10 - I2S Word Format

impl R<u8, TXDELAY_A>

pub fn variant(&self) -> TXDELAY_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSSETUP_A>

pub fn variant(&self) -> CSSETUP_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, ICS_A>

pub fn variant(&self) -> ICS_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSHOLD_A>

pub fn variant(&self) -> CSHOLD_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u32, Reg<u32, _TIMING>>

pub fn txdelay(&self) -> TXDELAY_R

Bits 16:18 - TX Frame Start Delay

pub fn cssetup(&self) -> CSSETUP_R

Bits 20:22 - Chip Select Setup

pub fn ics(&self) -> ICS_R

Bits 24:26 - Inter-character Spacing

pub fn cshold(&self) -> CSHOLD_R

Bits 28:30 - Chip Select Hold

impl R<u32, Reg<u32, _CTRLX>>

pub fn dbghalt(&self) -> DBGHALT_R

Bit 0 - Debug Halt

pub fn ctsinv(&self) -> CTSINV_R

Bit 1 - CTS Pin Inversion

pub fn ctsen(&self) -> CTSEN_R

Bit 2 - CTS Function Enabled

pub fn rtsinv(&self) -> RTSINV_R

Bit 3 - RTS Pin Inversion

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP0>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 0

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 0

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP0

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP1>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 1

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 1

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP1

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP2>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 2

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 2

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP2

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn rxpen(&self) -> RXPEN_R

Bit 0 - RX Pin Enable

pub fn txpen(&self) -> TXPEN_R

Bit 1 - TX Pin Enable

pub fn cspen(&self) -> CSPEN_R

Bit 2 - CS Pin Enable

pub fn clkpen(&self) -> CLKPEN_R

Bit 3 - CLK Pin Enable

pub fn ctspen(&self) -> CTSPEN_R

Bit 4 - CTS Pin Enable

pub fn rtspen(&self) -> RTSPEN_R

Bit 5 - RTS Pin Enable

impl R<u8, RXLOC_A>

pub fn variant(&self) -> Variant<u8, RXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, TXLOC_A>

pub fn variant(&self) -> Variant<u8, TXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CSLOC_A>

pub fn variant(&self) -> Variant<u8, CSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CLKLOC_A>

pub fn variant(&self) -> Variant<u8, CLKLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn rxloc(&self) -> RXLOC_R

Bits 0:5 - I/O Location

pub fn txloc(&self) -> TXLOC_R

Bits 8:13 - I/O Location

pub fn csloc(&self) -> CSLOC_R

Bits 16:21 - I/O Location

pub fn clkloc(&self) -> CLKLOC_R

Bits 24:29 - I/O Location

impl R<u8, CTSLOC_A>

pub fn variant(&self) -> Variant<u8, CTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, RTSLOC_A>

pub fn variant(&self) -> Variant<u8, RTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC1>>

pub fn ctsloc(&self) -> CTSLOC_R

Bits 0:5 - I/O Location

pub fn rtsloc(&self) -> RTSLOC_R

Bits 8:13 - I/O Location

impl R<u8, OVS_A>

pub fn variant(&self) -> OVS_A

Get enumerated values variant

pub fn is_x16(&self) -> bool

Checks if the value of the field is X16

pub fn is_x8(&self) -> bool

Checks if the value of the field is X8

pub fn is_x6(&self) -> bool

Checks if the value of the field is X6

pub fn is_x4(&self) -> bool

Checks if the value of the field is X4

impl R<u32, Reg<u32, _CTRL>>

pub fn sync(&self) -> SYNC_R

Bit 0 - USART Synchronous Mode

pub fn loopbk(&self) -> LOOPBK_R

Bit 1 - Loopback Enable

pub fn ccen(&self) -> CCEN_R

Bit 2 - Collision Check Enable

pub fn mpm(&self) -> MPM_R

Bit 3 - Multi-Processor Mode

pub fn mpab(&self) -> MPAB_R

Bit 4 - Multi-Processor Address-Bit

pub fn ovs(&self) -> OVS_R

Bits 5:6 - Oversampling

pub fn clkpol(&self) -> CLKPOL_R

Bit 8 - Clock Polarity

pub fn clkpha(&self) -> CLKPHA_R

Bit 9 - Clock Edge for Setup/Sample

pub fn msbf(&self) -> MSBF_R

Bit 10 - Most Significant Bit First

pub fn csma(&self) -> CSMA_R

Bit 11 - Action on Slave-Select in Master Mode

pub fn txbil(&self) -> TXBIL_R

Bit 12 - TX Buffer Interrupt Level

pub fn rxinv(&self) -> RXINV_R

Bit 13 - Receiver Input Invert

pub fn txinv(&self) -> TXINV_R

Bit 14 - Transmitter Output Invert

pub fn csinv(&self) -> CSINV_R

Bit 15 - Chip Select Invert

pub fn autocs(&self) -> AUTOCS_R

Bit 16 - Automatic Chip Select

pub fn autotri(&self) -> AUTOTRI_R

Bit 17 - Automatic TX Tristate

pub fn scmode(&self) -> SCMODE_R

Bit 18 - SmartCard Mode

pub fn scretrans(&self) -> SCRETRANS_R

Bit 19 - SmartCard Retransmit

pub fn skipperrf(&self) -> SKIPPERRF_R

Bit 20 - Skip Parity Error Frames

pub fn bit8dv(&self) -> BIT8DV_R

Bit 21 - Bit 8 Default Value

pub fn errsdma(&self) -> ERRSDMA_R

Bit 22 - Halt DMA on Error

pub fn errsrx(&self) -> ERRSRX_R

Bit 23 - Disable RX on Error

pub fn errstx(&self) -> ERRSTX_R

Bit 24 - Disable TX on Error

pub fn sssearly(&self) -> SSSEARLY_R

Bit 25 - Synchronous Slave Setup Early

pub fn byteswap(&self) -> BYTESWAP_R

Bit 28 - Byteswap in Double Accesses

pub fn autotx(&self) -> AUTOTX_R

Bit 29 - Always Transmit When RX Not Full

pub fn mvdis(&self) -> MVDIS_R

Bit 30 - Majority Vote Disable

pub fn smsdelay(&self) -> SMSDELAY_R

Bit 31 - Synchronous Master Sample Delay

impl R<u8, DATABITS_A>

pub fn variant(&self) -> Variant<u8, DATABITS_A>

Get enumerated values variant

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_five(&self) -> bool

Checks if the value of the field is FIVE

pub fn is_six(&self) -> bool

Checks if the value of the field is SIX

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

pub fn is_nine(&self) -> bool

Checks if the value of the field is NINE

pub fn is_ten(&self) -> bool

Checks if the value of the field is TEN

pub fn is_eleven(&self) -> bool

Checks if the value of the field is ELEVEN

pub fn is_twelve(&self) -> bool

Checks if the value of the field is TWELVE

pub fn is_thirteen(&self) -> bool

Checks if the value of the field is THIRTEEN

pub fn is_fourteen(&self) -> bool

Checks if the value of the field is FOURTEEN

pub fn is_fifteen(&self) -> bool

Checks if the value of the field is FIFTEEN

pub fn is_sixteen(&self) -> bool

Checks if the value of the field is SIXTEEN

impl R<u8, PARITY_A>

pub fn variant(&self) -> Variant<u8, PARITY_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_even(&self) -> bool

Checks if the value of the field is EVEN

pub fn is_odd(&self) -> bool

Checks if the value of the field is ODD

impl R<u8, STOPBITS_A>

pub fn variant(&self) -> STOPBITS_A

Get enumerated values variant

pub fn is_half(&self) -> bool

Checks if the value of the field is HALF

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_oneandahalf(&self) -> bool

Checks if the value of the field is ONEANDAHALF

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

impl R<u32, Reg<u32, _FRAME>>

pub fn databits(&self) -> DATABITS_R

Bits 0:3 - Data-Bit Mode

pub fn parity(&self) -> PARITY_R

Bits 8:9 - Parity-Bit Mode

pub fn stopbits(&self) -> STOPBITS_R

Bits 12:13 - Stop-Bit Mode

impl R<u8, TSEL_A>

pub fn variant(&self) -> Variant<u8, TSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _TRIGCTRL>>

pub fn rxten(&self) -> RXTEN_R

Bit 4 - Receive Trigger Enable

pub fn txten(&self) -> TXTEN_R

Bit 5 - Transmit Trigger Enable

pub fn autotxten(&self) -> AUTOTXTEN_R

Bit 6 - AUTOTX Trigger Enable

pub fn txarx0en(&self) -> TXARX0EN_R

Bit 7 - Enable Transmit Trigger After RX End of Frame Plus TCMP0VAL

pub fn txarx1en(&self) -> TXARX1EN_R

Bit 8 - Enable Transmit Trigger After RX End of Frame Plus TCMP1VAL

pub fn txarx2en(&self) -> TXARX2EN_R

Bit 9 - Enable Transmit Trigger After RX End of Frame Plus TCMP2VAL

pub fn rxatx0en(&self) -> RXATX0EN_R

Bit 10 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL0 Baud-times

pub fn rxatx1en(&self) -> RXATX1EN_R

Bit 11 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL1 Baud-times

pub fn rxatx2en(&self) -> RXATX2EN_R

Bit 12 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL2 Baud-times

pub fn tsel(&self) -> TSEL_R

Bits 16:20 - Trigger PRS Channel Select

impl R<u32, Reg<u32, _STATUS>>

pub fn rxens(&self) -> RXENS_R

Bit 0 - Receiver Enable Status

pub fn txens(&self) -> TXENS_R

Bit 1 - Transmitter Enable Status

pub fn master(&self) -> MASTER_R

Bit 2 - SPI Master Mode

pub fn rxblock(&self) -> RXBLOCK_R

Bit 3 - Block Incoming Data

pub fn txtri(&self) -> TXTRI_R

Bit 4 - Transmitter Tristated

pub fn txc(&self) -> TXC_R

Bit 5 - TX Complete

pub fn txbl(&self) -> TXBL_R

Bit 6 - TX Buffer Level

pub fn rxdatav(&self) -> RXDATAV_R

Bit 7 - RX Data Valid

pub fn rxfull(&self) -> RXFULL_R

Bit 8 - RX FIFO Full

pub fn txbdright(&self) -> TXBDRIGHT_R

Bit 9 - TX Buffer Expects Double Right Data

pub fn txbsright(&self) -> TXBSRIGHT_R

Bit 10 - TX Buffer Expects Single Right Data

pub fn rxdatavright(&self) -> RXDATAVRIGHT_R

Bit 11 - RX Data Right

pub fn rxfullright(&self) -> RXFULLRIGHT_R

Bit 12 - RX Full of Right Data

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle

pub fn timerrestarted(&self) -> TIMERRESTARTED_R

Bit 14 - The USART Timer Restarted Itself

pub fn txbufcnt(&self) -> TXBUFCNT_R

Bits 16:17 - TX Buffer Count

impl R<u32, Reg<u32, _CLKDIV>>

pub fn div(&self) -> DIV_R

Bits 3:22 - Fractional Clock Divider

pub fn autobauden(&self) -> AUTOBAUDEN_R

Bit 31 - AUTOBAUD Detection Enable

impl R<u32, Reg<u32, _RXDATAX>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:8 - RX Data

pub fn perr(&self) -> PERR_R

Bit 14 - Data Parity Error

pub fn ferr(&self) -> FERR_R

Bit 15 - Data Framing Error

impl R<u32, Reg<u32, _RXDATA>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:7 - RX Data

impl R<u32, Reg<u32, _RXDOUBLEX>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:8 - RX Data 0

pub fn perr0(&self) -> PERR0_R

Bit 14 - Data Parity Error 0

pub fn ferr0(&self) -> FERR0_R

Bit 15 - Data Framing Error 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 16:24 - RX Data 1

pub fn perr1(&self) -> PERR1_R

Bit 30 - Data Parity Error 1

pub fn ferr1(&self) -> FERR1_R

Bit 31 - Data Framing Error 1

impl R<u32, Reg<u32, _RXDOUBLE>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:7 - RX Data 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 8:15 - RX Data 1

impl R<u32, Reg<u32, _RXDATAXP>>

pub fn rxdatap(&self) -> RXDATAP_R

Bits 0:8 - RX Data Peek

pub fn perrp(&self) -> PERRP_R

Bit 14 - Data Parity Error Peek

pub fn ferrp(&self) -> FERRP_R

Bit 15 - Data Framing Error Peek

impl R<u32, Reg<u32, _RXDOUBLEXP>>

pub fn rxdatap0(&self) -> RXDATAP0_R

Bits 0:8 - RX Data 0 Peek

pub fn perrp0(&self) -> PERRP0_R

Bit 14 - Data Parity Error 0 Peek

pub fn ferrp0(&self) -> FERRP0_R

Bit 15 - Data Framing Error 0 Peek

pub fn rxdatap1(&self) -> RXDATAP1_R

Bits 16:24 - RX Data 1 Peek

pub fn perrp1(&self) -> PERRP1_R

Bit 30 - Data Parity Error 1 Peek

pub fn ferrp1(&self) -> FERRP1_R

Bit 31 - Data Framing Error 1 Peek

impl R<u32, Reg<u32, _TXDATAX>>

pub fn txdatax(&self) -> TXDATAX_R

Bits 0:8 - TX Data

pub fn ubrxat(&self) -> UBRXAT_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat(&self) -> TXTRIAT_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak(&self) -> TXBREAK_R

Bit 13 - Transmit Data as Break

pub fn txdisat(&self) -> TXDISAT_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat(&self) -> RXENAT_R

Bit 15 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDATA>>

pub fn txdata(&self) -> TXDATA_R

Bits 0:7 - TX Data

impl R<u32, Reg<u32, _TXDOUBLEX>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:8 - TX Data

pub fn ubrxat0(&self) -> UBRXAT0_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat0(&self) -> TXTRIAT0_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak0(&self) -> TXBREAK0_R

Bit 13 - Transmit Data as Break

pub fn txdisat0(&self) -> TXDISAT0_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat0(&self) -> RXENAT0_R

Bit 15 - Enable RX After Transmission

pub fn txdata1(&self) -> TXDATA1_R

Bits 16:24 - TX Data

pub fn ubrxat1(&self) -> UBRXAT1_R

Bit 27 - Unblock RX After Transmission

pub fn txtriat1(&self) -> TXTRIAT1_R

Bit 28 - Set TXTRI After Transmission

pub fn txbreak1(&self) -> TXBREAK1_R

Bit 29 - Transmit Data as Break

pub fn txdisat1(&self) -> TXDISAT1_R

Bit 30 - Clear TXEN After Transmission

pub fn rxenat1(&self) -> RXENAT1_R

Bit 31 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDOUBLE>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:7 - TX Data

pub fn txdata1(&self) -> TXDATA1_R

Bits 8:15 - TX Data

impl R<u32, Reg<u32, _IF>>

pub fn txc(&self) -> TXC_R

Bit 0 - TX Complete Interrupt Flag

pub fn txbl(&self) -> TXBL_R

Bit 1 - TX Buffer Level Interrupt Flag

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RX Data Valid Interrupt Flag

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RX Buffer Full Interrupt Flag

pub fn rxof(&self) -> RXOF_R

Bit 4 - RX Overflow Interrupt Flag

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RX Underflow Interrupt Flag

pub fn txof(&self) -> TXOF_R

Bit 6 - TX Overflow Interrupt Flag

pub fn txuf(&self) -> TXUF_R

Bit 7 - TX Underflow Interrupt Flag

pub fn perr(&self) -> PERR_R

Bit 8 - Parity Error Interrupt Flag

pub fn ferr(&self) -> FERR_R

Bit 9 - Framing Error Interrupt Flag

pub fn mpaf(&self) -> MPAF_R

Bit 10 - Multi-Processor Address Frame Interrupt Flag

pub fn ssm(&self) -> SSM_R

Bit 11 - Slave-Select in Master Mode Interrupt Flag

pub fn ccf(&self) -> CCF_R

Bit 12 - Collision Check Fail Interrupt Flag

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle Interrupt Flag

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - Timer Comparator 0 Interrupt Flag

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - Timer Comparator 1 Interrupt Flag

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - Timer Comparator 2 Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn txc(&self) -> TXC_R

Bit 0 - TXC Interrupt Enable

pub fn txbl(&self) -> TXBL_R

Bit 1 - TXBL Interrupt Enable

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RXDATAV Interrupt Enable

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RXFULL Interrupt Enable

pub fn rxof(&self) -> RXOF_R

Bit 4 - RXOF Interrupt Enable

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RXUF Interrupt Enable

pub fn txof(&self) -> TXOF_R

Bit 6 - TXOF Interrupt Enable

pub fn txuf(&self) -> TXUF_R

Bit 7 - TXUF Interrupt Enable

pub fn perr(&self) -> PERR_R

Bit 8 - PERR Interrupt Enable

pub fn ferr(&self) -> FERR_R

Bit 9 - FERR Interrupt Enable

pub fn mpaf(&self) -> MPAF_R

Bit 10 - MPAF Interrupt Enable

pub fn ssm(&self) -> SSM_R

Bit 11 - SSM Interrupt Enable

pub fn ccf(&self) -> CCF_R

Bit 12 - CCF Interrupt Enable

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TXIDLE Interrupt Enable

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - TCMP0 Interrupt Enable

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - TCMP1 Interrupt Enable

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - TCMP2 Interrupt Enable

impl R<u8, IRPW_A>

pub fn variant(&self) -> IRPW_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

impl R<u8, IRPRSSEL_A>

pub fn variant(&self) -> Variant<u8, IRPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _IRCTRL>>

pub fn iren(&self) -> IREN_R

Bit 0 - Enable IrDA Module

pub fn irpw(&self) -> IRPW_R

Bits 1:2 - IrDA TX Pulse Width

pub fn irfilt(&self) -> IRFILT_R

Bit 3 - IrDA RX Filter

pub fn irprsen(&self) -> IRPRSEN_R

Bit 7 - IrDA PRS Channel Enable

pub fn irprssel(&self) -> IRPRSSEL_R

Bits 8:12 - IrDA PRS Channel Select

impl R<u8, RXPRSSEL_A>

pub fn variant(&self) -> Variant<u8, RXPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, CLKPRSSEL_A>

pub fn variant(&self) -> Variant<u8, CLKPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _INPUT>>

pub fn rxprssel(&self) -> RXPRSSEL_R

Bits 0:4 - RX PRS Channel Select

pub fn rxprs(&self) -> RXPRS_R

Bit 7 - PRS RX Enable

pub fn clkprssel(&self) -> CLKPRSSEL_R

Bits 8:12 - CLK PRS Channel Select

pub fn clkprs(&self) -> CLKPRS_R

Bit 15 - PRS CLK Enable

impl R<u8, FORMAT_A>

pub fn variant(&self) -> FORMAT_A

Get enumerated values variant

pub fn is_w32d32(&self) -> bool

Checks if the value of the field is W32D32

pub fn is_w32d24m(&self) -> bool

Checks if the value of the field is W32D24M

pub fn is_w32d24(&self) -> bool

Checks if the value of the field is W32D24

pub fn is_w32d16(&self) -> bool

Checks if the value of the field is W32D16

pub fn is_w32d8(&self) -> bool

Checks if the value of the field is W32D8

pub fn is_w16d16(&self) -> bool

Checks if the value of the field is W16D16

pub fn is_w16d8(&self) -> bool

Checks if the value of the field is W16D8

pub fn is_w8d8(&self) -> bool

Checks if the value of the field is W8D8

impl R<u32, Reg<u32, _I2SCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable I2S Mode

pub fn mono(&self) -> MONO_R

Bit 1 - Stero or Mono

pub fn justify(&self) -> JUSTIFY_R

Bit 2 - Justification of I2S Data

pub fn dmasplit(&self) -> DMASPLIT_R

Bit 3 - Separate DMA Request for Left/Right Data

pub fn delay(&self) -> DELAY_R

Bit 4 - Delay on I2S Data

pub fn format(&self) -> FORMAT_R

Bits 8:10 - I2S Word Format

impl R<u8, TXDELAY_A>

pub fn variant(&self) -> TXDELAY_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSSETUP_A>

pub fn variant(&self) -> CSSETUP_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, ICS_A>

pub fn variant(&self) -> ICS_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSHOLD_A>

pub fn variant(&self) -> CSHOLD_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u32, Reg<u32, _TIMING>>

pub fn txdelay(&self) -> TXDELAY_R

Bits 16:18 - TX Frame Start Delay

pub fn cssetup(&self) -> CSSETUP_R

Bits 20:22 - Chip Select Setup

pub fn ics(&self) -> ICS_R

Bits 24:26 - Inter-character Spacing

pub fn cshold(&self) -> CSHOLD_R

Bits 28:30 - Chip Select Hold

impl R<u32, Reg<u32, _CTRLX>>

pub fn dbghalt(&self) -> DBGHALT_R

Bit 0 - Debug Halt

pub fn ctsinv(&self) -> CTSINV_R

Bit 1 - CTS Pin Inversion

pub fn ctsen(&self) -> CTSEN_R

Bit 2 - CTS Function Enabled

pub fn rtsinv(&self) -> RTSINV_R

Bit 3 - RTS Pin Inversion

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP0>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 0

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 0

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP0

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP1>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 1

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 1

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP1

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP2>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 2

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 2

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP2

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn rxpen(&self) -> RXPEN_R

Bit 0 - RX Pin Enable

pub fn txpen(&self) -> TXPEN_R

Bit 1 - TX Pin Enable

pub fn cspen(&self) -> CSPEN_R

Bit 2 - CS Pin Enable

pub fn clkpen(&self) -> CLKPEN_R

Bit 3 - CLK Pin Enable

pub fn ctspen(&self) -> CTSPEN_R

Bit 4 - CTS Pin Enable

pub fn rtspen(&self) -> RTSPEN_R

Bit 5 - RTS Pin Enable

impl R<u8, RXLOC_A>

pub fn variant(&self) -> Variant<u8, RXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, TXLOC_A>

pub fn variant(&self) -> Variant<u8, TXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CSLOC_A>

pub fn variant(&self) -> Variant<u8, CSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CLKLOC_A>

pub fn variant(&self) -> Variant<u8, CLKLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn rxloc(&self) -> RXLOC_R

Bits 0:5 - I/O Location

pub fn txloc(&self) -> TXLOC_R

Bits 8:13 - I/O Location

pub fn csloc(&self) -> CSLOC_R

Bits 16:21 - I/O Location

pub fn clkloc(&self) -> CLKLOC_R

Bits 24:29 - I/O Location

impl R<u8, CTSLOC_A>

pub fn variant(&self) -> Variant<u8, CTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, RTSLOC_A>

pub fn variant(&self) -> Variant<u8, RTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC1>>

pub fn ctsloc(&self) -> CTSLOC_R

Bits 0:5 - I/O Location

pub fn rtsloc(&self) -> RTSLOC_R

Bits 8:13 - I/O Location

impl R<u8, OVS_A>

pub fn variant(&self) -> OVS_A

Get enumerated values variant

pub fn is_x16(&self) -> bool

Checks if the value of the field is X16

pub fn is_x8(&self) -> bool

Checks if the value of the field is X8

pub fn is_x6(&self) -> bool

Checks if the value of the field is X6

pub fn is_x4(&self) -> bool

Checks if the value of the field is X4

impl R<u32, Reg<u32, _CTRL>>

pub fn sync(&self) -> SYNC_R

Bit 0 - USART Synchronous Mode

pub fn loopbk(&self) -> LOOPBK_R

Bit 1 - Loopback Enable

pub fn ccen(&self) -> CCEN_R

Bit 2 - Collision Check Enable

pub fn mpm(&self) -> MPM_R

Bit 3 - Multi-Processor Mode

pub fn mpab(&self) -> MPAB_R

Bit 4 - Multi-Processor Address-Bit

pub fn ovs(&self) -> OVS_R

Bits 5:6 - Oversampling

pub fn clkpol(&self) -> CLKPOL_R

Bit 8 - Clock Polarity

pub fn clkpha(&self) -> CLKPHA_R

Bit 9 - Clock Edge for Setup/Sample

pub fn msbf(&self) -> MSBF_R

Bit 10 - Most Significant Bit First

pub fn csma(&self) -> CSMA_R

Bit 11 - Action on Slave-Select in Master Mode

pub fn txbil(&self) -> TXBIL_R

Bit 12 - TX Buffer Interrupt Level

pub fn rxinv(&self) -> RXINV_R

Bit 13 - Receiver Input Invert

pub fn txinv(&self) -> TXINV_R

Bit 14 - Transmitter Output Invert

pub fn csinv(&self) -> CSINV_R

Bit 15 - Chip Select Invert

pub fn autocs(&self) -> AUTOCS_R

Bit 16 - Automatic Chip Select

pub fn autotri(&self) -> AUTOTRI_R

Bit 17 - Automatic TX Tristate

pub fn scmode(&self) -> SCMODE_R

Bit 18 - SmartCard Mode

pub fn scretrans(&self) -> SCRETRANS_R

Bit 19 - SmartCard Retransmit

pub fn skipperrf(&self) -> SKIPPERRF_R

Bit 20 - Skip Parity Error Frames

pub fn bit8dv(&self) -> BIT8DV_R

Bit 21 - Bit 8 Default Value

pub fn errsdma(&self) -> ERRSDMA_R

Bit 22 - Halt DMA on Error

pub fn errsrx(&self) -> ERRSRX_R

Bit 23 - Disable RX on Error

pub fn errstx(&self) -> ERRSTX_R

Bit 24 - Disable TX on Error

pub fn sssearly(&self) -> SSSEARLY_R

Bit 25 - Synchronous Slave Setup Early

pub fn byteswap(&self) -> BYTESWAP_R

Bit 28 - Byteswap in Double Accesses

pub fn autotx(&self) -> AUTOTX_R

Bit 29 - Always Transmit When RX Not Full

pub fn mvdis(&self) -> MVDIS_R

Bit 30 - Majority Vote Disable

pub fn smsdelay(&self) -> SMSDELAY_R

Bit 31 - Synchronous Master Sample Delay

impl R<u8, DATABITS_A>

pub fn variant(&self) -> Variant<u8, DATABITS_A>

Get enumerated values variant

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_five(&self) -> bool

Checks if the value of the field is FIVE

pub fn is_six(&self) -> bool

Checks if the value of the field is SIX

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

pub fn is_nine(&self) -> bool

Checks if the value of the field is NINE

pub fn is_ten(&self) -> bool

Checks if the value of the field is TEN

pub fn is_eleven(&self) -> bool

Checks if the value of the field is ELEVEN

pub fn is_twelve(&self) -> bool

Checks if the value of the field is TWELVE

pub fn is_thirteen(&self) -> bool

Checks if the value of the field is THIRTEEN

pub fn is_fourteen(&self) -> bool

Checks if the value of the field is FOURTEEN

pub fn is_fifteen(&self) -> bool

Checks if the value of the field is FIFTEEN

pub fn is_sixteen(&self) -> bool

Checks if the value of the field is SIXTEEN

impl R<u8, PARITY_A>

pub fn variant(&self) -> Variant<u8, PARITY_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_even(&self) -> bool

Checks if the value of the field is EVEN

pub fn is_odd(&self) -> bool

Checks if the value of the field is ODD

impl R<u8, STOPBITS_A>

pub fn variant(&self) -> STOPBITS_A

Get enumerated values variant

pub fn is_half(&self) -> bool

Checks if the value of the field is HALF

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_oneandahalf(&self) -> bool

Checks if the value of the field is ONEANDAHALF

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

impl R<u32, Reg<u32, _FRAME>>

pub fn databits(&self) -> DATABITS_R

Bits 0:3 - Data-Bit Mode

pub fn parity(&self) -> PARITY_R

Bits 8:9 - Parity-Bit Mode

pub fn stopbits(&self) -> STOPBITS_R

Bits 12:13 - Stop-Bit Mode

impl R<u8, TSEL_A>

pub fn variant(&self) -> Variant<u8, TSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _TRIGCTRL>>

pub fn rxten(&self) -> RXTEN_R

Bit 4 - Receive Trigger Enable

pub fn txten(&self) -> TXTEN_R

Bit 5 - Transmit Trigger Enable

pub fn autotxten(&self) -> AUTOTXTEN_R

Bit 6 - AUTOTX Trigger Enable

pub fn txarx0en(&self) -> TXARX0EN_R

Bit 7 - Enable Transmit Trigger After RX End of Frame Plus TCMP0VAL

pub fn txarx1en(&self) -> TXARX1EN_R

Bit 8 - Enable Transmit Trigger After RX End of Frame Plus TCMP1VAL

pub fn txarx2en(&self) -> TXARX2EN_R

Bit 9 - Enable Transmit Trigger After RX End of Frame Plus TCMP2VAL

pub fn rxatx0en(&self) -> RXATX0EN_R

Bit 10 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL0 Baud-times

pub fn rxatx1en(&self) -> RXATX1EN_R

Bit 11 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL1 Baud-times

pub fn rxatx2en(&self) -> RXATX2EN_R

Bit 12 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL2 Baud-times

pub fn tsel(&self) -> TSEL_R

Bits 16:20 - Trigger PRS Channel Select

impl R<u32, Reg<u32, _STATUS>>

pub fn rxens(&self) -> RXENS_R

Bit 0 - Receiver Enable Status

pub fn txens(&self) -> TXENS_R

Bit 1 - Transmitter Enable Status

pub fn master(&self) -> MASTER_R

Bit 2 - SPI Master Mode

pub fn rxblock(&self) -> RXBLOCK_R

Bit 3 - Block Incoming Data

pub fn txtri(&self) -> TXTRI_R

Bit 4 - Transmitter Tristated

pub fn txc(&self) -> TXC_R

Bit 5 - TX Complete

pub fn txbl(&self) -> TXBL_R

Bit 6 - TX Buffer Level

pub fn rxdatav(&self) -> RXDATAV_R

Bit 7 - RX Data Valid

pub fn rxfull(&self) -> RXFULL_R

Bit 8 - RX FIFO Full

pub fn txbdright(&self) -> TXBDRIGHT_R

Bit 9 - TX Buffer Expects Double Right Data

pub fn txbsright(&self) -> TXBSRIGHT_R

Bit 10 - TX Buffer Expects Single Right Data

pub fn rxdatavright(&self) -> RXDATAVRIGHT_R

Bit 11 - RX Data Right

pub fn rxfullright(&self) -> RXFULLRIGHT_R

Bit 12 - RX Full of Right Data

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle

pub fn timerrestarted(&self) -> TIMERRESTARTED_R

Bit 14 - The USART Timer Restarted Itself

pub fn txbufcnt(&self) -> TXBUFCNT_R

Bits 16:17 - TX Buffer Count

impl R<u32, Reg<u32, _CLKDIV>>

pub fn div(&self) -> DIV_R

Bits 3:22 - Fractional Clock Divider

pub fn autobauden(&self) -> AUTOBAUDEN_R

Bit 31 - AUTOBAUD Detection Enable

impl R<u32, Reg<u32, _RXDATAX>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:8 - RX Data

pub fn perr(&self) -> PERR_R

Bit 14 - Data Parity Error

pub fn ferr(&self) -> FERR_R

Bit 15 - Data Framing Error

impl R<u32, Reg<u32, _RXDATA>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:7 - RX Data

impl R<u32, Reg<u32, _RXDOUBLEX>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:8 - RX Data 0

pub fn perr0(&self) -> PERR0_R

Bit 14 - Data Parity Error 0

pub fn ferr0(&self) -> FERR0_R

Bit 15 - Data Framing Error 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 16:24 - RX Data 1

pub fn perr1(&self) -> PERR1_R

Bit 30 - Data Parity Error 1

pub fn ferr1(&self) -> FERR1_R

Bit 31 - Data Framing Error 1

impl R<u32, Reg<u32, _RXDOUBLE>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:7 - RX Data 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 8:15 - RX Data 1

impl R<u32, Reg<u32, _RXDATAXP>>

pub fn rxdatap(&self) -> RXDATAP_R

Bits 0:8 - RX Data Peek

pub fn perrp(&self) -> PERRP_R

Bit 14 - Data Parity Error Peek

pub fn ferrp(&self) -> FERRP_R

Bit 15 - Data Framing Error Peek

impl R<u32, Reg<u32, _RXDOUBLEXP>>

pub fn rxdatap0(&self) -> RXDATAP0_R

Bits 0:8 - RX Data 0 Peek

pub fn perrp0(&self) -> PERRP0_R

Bit 14 - Data Parity Error 0 Peek

pub fn ferrp0(&self) -> FERRP0_R

Bit 15 - Data Framing Error 0 Peek

pub fn rxdatap1(&self) -> RXDATAP1_R

Bits 16:24 - RX Data 1 Peek

pub fn perrp1(&self) -> PERRP1_R

Bit 30 - Data Parity Error 1 Peek

pub fn ferrp1(&self) -> FERRP1_R

Bit 31 - Data Framing Error 1 Peek

impl R<u32, Reg<u32, _TXDATAX>>

pub fn txdatax(&self) -> TXDATAX_R

Bits 0:8 - TX Data

pub fn ubrxat(&self) -> UBRXAT_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat(&self) -> TXTRIAT_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak(&self) -> TXBREAK_R

Bit 13 - Transmit Data as Break

pub fn txdisat(&self) -> TXDISAT_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat(&self) -> RXENAT_R

Bit 15 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDATA>>

pub fn txdata(&self) -> TXDATA_R

Bits 0:7 - TX Data

impl R<u32, Reg<u32, _TXDOUBLEX>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:8 - TX Data

pub fn ubrxat0(&self) -> UBRXAT0_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat0(&self) -> TXTRIAT0_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak0(&self) -> TXBREAK0_R

Bit 13 - Transmit Data as Break

pub fn txdisat0(&self) -> TXDISAT0_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat0(&self) -> RXENAT0_R

Bit 15 - Enable RX After Transmission

pub fn txdata1(&self) -> TXDATA1_R

Bits 16:24 - TX Data

pub fn ubrxat1(&self) -> UBRXAT1_R

Bit 27 - Unblock RX After Transmission

pub fn txtriat1(&self) -> TXTRIAT1_R

Bit 28 - Set TXTRI After Transmission

pub fn txbreak1(&self) -> TXBREAK1_R

Bit 29 - Transmit Data as Break

pub fn txdisat1(&self) -> TXDISAT1_R

Bit 30 - Clear TXEN After Transmission

pub fn rxenat1(&self) -> RXENAT1_R

Bit 31 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDOUBLE>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:7 - TX Data

pub fn txdata1(&self) -> TXDATA1_R

Bits 8:15 - TX Data

impl R<u32, Reg<u32, _IF>>

pub fn txc(&self) -> TXC_R

Bit 0 - TX Complete Interrupt Flag

pub fn txbl(&self) -> TXBL_R

Bit 1 - TX Buffer Level Interrupt Flag

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RX Data Valid Interrupt Flag

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RX Buffer Full Interrupt Flag

pub fn rxof(&self) -> RXOF_R

Bit 4 - RX Overflow Interrupt Flag

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RX Underflow Interrupt Flag

pub fn txof(&self) -> TXOF_R

Bit 6 - TX Overflow Interrupt Flag

pub fn txuf(&self) -> TXUF_R

Bit 7 - TX Underflow Interrupt Flag

pub fn perr(&self) -> PERR_R

Bit 8 - Parity Error Interrupt Flag

pub fn ferr(&self) -> FERR_R

Bit 9 - Framing Error Interrupt Flag

pub fn mpaf(&self) -> MPAF_R

Bit 10 - Multi-Processor Address Frame Interrupt Flag

pub fn ssm(&self) -> SSM_R

Bit 11 - Slave-Select in Master Mode Interrupt Flag

pub fn ccf(&self) -> CCF_R

Bit 12 - Collision Check Fail Interrupt Flag

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle Interrupt Flag

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - Timer Comparator 0 Interrupt Flag

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - Timer Comparator 1 Interrupt Flag

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - Timer Comparator 2 Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn txc(&self) -> TXC_R

Bit 0 - TXC Interrupt Enable

pub fn txbl(&self) -> TXBL_R

Bit 1 - TXBL Interrupt Enable

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RXDATAV Interrupt Enable

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RXFULL Interrupt Enable

pub fn rxof(&self) -> RXOF_R

Bit 4 - RXOF Interrupt Enable

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RXUF Interrupt Enable

pub fn txof(&self) -> TXOF_R

Bit 6 - TXOF Interrupt Enable

pub fn txuf(&self) -> TXUF_R

Bit 7 - TXUF Interrupt Enable

pub fn perr(&self) -> PERR_R

Bit 8 - PERR Interrupt Enable

pub fn ferr(&self) -> FERR_R

Bit 9 - FERR Interrupt Enable

pub fn mpaf(&self) -> MPAF_R

Bit 10 - MPAF Interrupt Enable

pub fn ssm(&self) -> SSM_R

Bit 11 - SSM Interrupt Enable

pub fn ccf(&self) -> CCF_R

Bit 12 - CCF Interrupt Enable

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TXIDLE Interrupt Enable

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - TCMP0 Interrupt Enable

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - TCMP1 Interrupt Enable

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - TCMP2 Interrupt Enable

impl R<u8, IRPW_A>

pub fn variant(&self) -> IRPW_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

impl R<u8, IRPRSSEL_A>

pub fn variant(&self) -> Variant<u8, IRPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _IRCTRL>>

pub fn iren(&self) -> IREN_R

Bit 0 - Enable IrDA Module

pub fn irpw(&self) -> IRPW_R

Bits 1:2 - IrDA TX Pulse Width

pub fn irfilt(&self) -> IRFILT_R

Bit 3 - IrDA RX Filter

pub fn irprsen(&self) -> IRPRSEN_R

Bit 7 - IrDA PRS Channel Enable

pub fn irprssel(&self) -> IRPRSSEL_R

Bits 8:12 - IrDA PRS Channel Select

impl R<u8, RXPRSSEL_A>

pub fn variant(&self) -> Variant<u8, RXPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, CLKPRSSEL_A>

pub fn variant(&self) -> Variant<u8, CLKPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _INPUT>>

pub fn rxprssel(&self) -> RXPRSSEL_R

Bits 0:4 - RX PRS Channel Select

pub fn rxprs(&self) -> RXPRS_R

Bit 7 - PRS RX Enable

pub fn clkprssel(&self) -> CLKPRSSEL_R

Bits 8:12 - CLK PRS Channel Select

pub fn clkprs(&self) -> CLKPRS_R

Bit 15 - PRS CLK Enable

impl R<u8, FORMAT_A>

pub fn variant(&self) -> FORMAT_A

Get enumerated values variant

pub fn is_w32d32(&self) -> bool

Checks if the value of the field is W32D32

pub fn is_w32d24m(&self) -> bool

Checks if the value of the field is W32D24M

pub fn is_w32d24(&self) -> bool

Checks if the value of the field is W32D24

pub fn is_w32d16(&self) -> bool

Checks if the value of the field is W32D16

pub fn is_w32d8(&self) -> bool

Checks if the value of the field is W32D8

pub fn is_w16d16(&self) -> bool

Checks if the value of the field is W16D16

pub fn is_w16d8(&self) -> bool

Checks if the value of the field is W16D8

pub fn is_w8d8(&self) -> bool

Checks if the value of the field is W8D8

impl R<u32, Reg<u32, _I2SCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable I2S Mode

pub fn mono(&self) -> MONO_R

Bit 1 - Stero or Mono

pub fn justify(&self) -> JUSTIFY_R

Bit 2 - Justification of I2S Data

pub fn dmasplit(&self) -> DMASPLIT_R

Bit 3 - Separate DMA Request for Left/Right Data

pub fn delay(&self) -> DELAY_R

Bit 4 - Delay on I2S Data

pub fn format(&self) -> FORMAT_R

Bits 8:10 - I2S Word Format

impl R<u8, TXDELAY_A>

pub fn variant(&self) -> TXDELAY_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSSETUP_A>

pub fn variant(&self) -> CSSETUP_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, ICS_A>

pub fn variant(&self) -> ICS_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSHOLD_A>

pub fn variant(&self) -> CSHOLD_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u32, Reg<u32, _TIMING>>

pub fn txdelay(&self) -> TXDELAY_R

Bits 16:18 - TX Frame Start Delay

pub fn cssetup(&self) -> CSSETUP_R

Bits 20:22 - Chip Select Setup

pub fn ics(&self) -> ICS_R

Bits 24:26 - Inter-character Spacing

pub fn cshold(&self) -> CSHOLD_R

Bits 28:30 - Chip Select Hold

impl R<u32, Reg<u32, _CTRLX>>

pub fn dbghalt(&self) -> DBGHALT_R

Bit 0 - Debug Halt

pub fn ctsinv(&self) -> CTSINV_R

Bit 1 - CTS Pin Inversion

pub fn ctsen(&self) -> CTSEN_R

Bit 2 - CTS Function Enabled

pub fn rtsinv(&self) -> RTSINV_R

Bit 3 - RTS Pin Inversion

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP0>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 0

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 0

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP0

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP1>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 1

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 1

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP1

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP2>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 2

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 2

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP2

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn rxpen(&self) -> RXPEN_R

Bit 0 - RX Pin Enable

pub fn txpen(&self) -> TXPEN_R

Bit 1 - TX Pin Enable

pub fn cspen(&self) -> CSPEN_R

Bit 2 - CS Pin Enable

pub fn clkpen(&self) -> CLKPEN_R

Bit 3 - CLK Pin Enable

pub fn ctspen(&self) -> CTSPEN_R

Bit 4 - CTS Pin Enable

pub fn rtspen(&self) -> RTSPEN_R

Bit 5 - RTS Pin Enable

impl R<u8, RXLOC_A>

pub fn variant(&self) -> Variant<u8, RXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, TXLOC_A>

pub fn variant(&self) -> Variant<u8, TXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CSLOC_A>

pub fn variant(&self) -> Variant<u8, CSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CLKLOC_A>

pub fn variant(&self) -> Variant<u8, CLKLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn rxloc(&self) -> RXLOC_R

Bits 0:5 - I/O Location

pub fn txloc(&self) -> TXLOC_R

Bits 8:13 - I/O Location

pub fn csloc(&self) -> CSLOC_R

Bits 16:21 - I/O Location

pub fn clkloc(&self) -> CLKLOC_R

Bits 24:29 - I/O Location

impl R<u8, CTSLOC_A>

pub fn variant(&self) -> Variant<u8, CTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, RTSLOC_A>

pub fn variant(&self) -> Variant<u8, RTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC1>>

pub fn ctsloc(&self) -> CTSLOC_R

Bits 0:5 - I/O Location

pub fn rtsloc(&self) -> RTSLOC_R

Bits 8:13 - I/O Location

impl R<u8, OVS_A>

pub fn variant(&self) -> OVS_A

Get enumerated values variant

pub fn is_x16(&self) -> bool

Checks if the value of the field is X16

pub fn is_x8(&self) -> bool

Checks if the value of the field is X8

pub fn is_x6(&self) -> bool

Checks if the value of the field is X6

pub fn is_x4(&self) -> bool

Checks if the value of the field is X4

impl R<u32, Reg<u32, _CTRL>>

pub fn sync(&self) -> SYNC_R

Bit 0 - USART Synchronous Mode

pub fn loopbk(&self) -> LOOPBK_R

Bit 1 - Loopback Enable

pub fn ccen(&self) -> CCEN_R

Bit 2 - Collision Check Enable

pub fn mpm(&self) -> MPM_R

Bit 3 - Multi-Processor Mode

pub fn mpab(&self) -> MPAB_R

Bit 4 - Multi-Processor Address-Bit

pub fn ovs(&self) -> OVS_R

Bits 5:6 - Oversampling

pub fn clkpol(&self) -> CLKPOL_R

Bit 8 - Clock Polarity

pub fn clkpha(&self) -> CLKPHA_R

Bit 9 - Clock Edge for Setup/Sample

pub fn msbf(&self) -> MSBF_R

Bit 10 - Most Significant Bit First

pub fn csma(&self) -> CSMA_R

Bit 11 - Action on Slave-Select in Master Mode

pub fn txbil(&self) -> TXBIL_R

Bit 12 - TX Buffer Interrupt Level

pub fn rxinv(&self) -> RXINV_R

Bit 13 - Receiver Input Invert

pub fn txinv(&self) -> TXINV_R

Bit 14 - Transmitter Output Invert

pub fn csinv(&self) -> CSINV_R

Bit 15 - Chip Select Invert

pub fn autocs(&self) -> AUTOCS_R

Bit 16 - Automatic Chip Select

pub fn autotri(&self) -> AUTOTRI_R

Bit 17 - Automatic TX Tristate

pub fn scmode(&self) -> SCMODE_R

Bit 18 - SmartCard Mode

pub fn scretrans(&self) -> SCRETRANS_R

Bit 19 - SmartCard Retransmit

pub fn skipperrf(&self) -> SKIPPERRF_R

Bit 20 - Skip Parity Error Frames

pub fn bit8dv(&self) -> BIT8DV_R

Bit 21 - Bit 8 Default Value

pub fn errsdma(&self) -> ERRSDMA_R

Bit 22 - Halt DMA on Error

pub fn errsrx(&self) -> ERRSRX_R

Bit 23 - Disable RX on Error

pub fn errstx(&self) -> ERRSTX_R

Bit 24 - Disable TX on Error

pub fn sssearly(&self) -> SSSEARLY_R

Bit 25 - Synchronous Slave Setup Early

pub fn byteswap(&self) -> BYTESWAP_R

Bit 28 - Byteswap in Double Accesses

pub fn autotx(&self) -> AUTOTX_R

Bit 29 - Always Transmit When RX Not Full

pub fn mvdis(&self) -> MVDIS_R

Bit 30 - Majority Vote Disable

pub fn smsdelay(&self) -> SMSDELAY_R

Bit 31 - Synchronous Master Sample Delay

impl R<u8, DATABITS_A>

pub fn variant(&self) -> Variant<u8, DATABITS_A>

Get enumerated values variant

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

pub fn is_five(&self) -> bool

Checks if the value of the field is FIVE

pub fn is_six(&self) -> bool

Checks if the value of the field is SIX

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_eight(&self) -> bool

Checks if the value of the field is EIGHT

pub fn is_nine(&self) -> bool

Checks if the value of the field is NINE

pub fn is_ten(&self) -> bool

Checks if the value of the field is TEN

pub fn is_eleven(&self) -> bool

Checks if the value of the field is ELEVEN

pub fn is_twelve(&self) -> bool

Checks if the value of the field is TWELVE

pub fn is_thirteen(&self) -> bool

Checks if the value of the field is THIRTEEN

pub fn is_fourteen(&self) -> bool

Checks if the value of the field is FOURTEEN

pub fn is_fifteen(&self) -> bool

Checks if the value of the field is FIFTEEN

pub fn is_sixteen(&self) -> bool

Checks if the value of the field is SIXTEEN

impl R<u8, PARITY_A>

pub fn variant(&self) -> Variant<u8, PARITY_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_even(&self) -> bool

Checks if the value of the field is EVEN

pub fn is_odd(&self) -> bool

Checks if the value of the field is ODD

impl R<u8, STOPBITS_A>

pub fn variant(&self) -> STOPBITS_A

Get enumerated values variant

pub fn is_half(&self) -> bool

Checks if the value of the field is HALF

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_oneandahalf(&self) -> bool

Checks if the value of the field is ONEANDAHALF

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

impl R<u32, Reg<u32, _FRAME>>

pub fn databits(&self) -> DATABITS_R

Bits 0:3 - Data-Bit Mode

pub fn parity(&self) -> PARITY_R

Bits 8:9 - Parity-Bit Mode

pub fn stopbits(&self) -> STOPBITS_R

Bits 12:13 - Stop-Bit Mode

impl R<u8, TSEL_A>

pub fn variant(&self) -> Variant<u8, TSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _TRIGCTRL>>

pub fn rxten(&self) -> RXTEN_R

Bit 4 - Receive Trigger Enable

pub fn txten(&self) -> TXTEN_R

Bit 5 - Transmit Trigger Enable

pub fn autotxten(&self) -> AUTOTXTEN_R

Bit 6 - AUTOTX Trigger Enable

pub fn txarx0en(&self) -> TXARX0EN_R

Bit 7 - Enable Transmit Trigger After RX End of Frame Plus TCMP0VAL

pub fn txarx1en(&self) -> TXARX1EN_R

Bit 8 - Enable Transmit Trigger After RX End of Frame Plus TCMP1VAL

pub fn txarx2en(&self) -> TXARX2EN_R

Bit 9 - Enable Transmit Trigger After RX End of Frame Plus TCMP2VAL

pub fn rxatx0en(&self) -> RXATX0EN_R

Bit 10 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL0 Baud-times

pub fn rxatx1en(&self) -> RXATX1EN_R

Bit 11 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL1 Baud-times

pub fn rxatx2en(&self) -> RXATX2EN_R

Bit 12 - Enable Receive Trigger After TX End of Frame Plus TCMPVAL2 Baud-times

pub fn tsel(&self) -> TSEL_R

Bits 16:20 - Trigger PRS Channel Select

impl R<u32, Reg<u32, _STATUS>>

pub fn rxens(&self) -> RXENS_R

Bit 0 - Receiver Enable Status

pub fn txens(&self) -> TXENS_R

Bit 1 - Transmitter Enable Status

pub fn master(&self) -> MASTER_R

Bit 2 - SPI Master Mode

pub fn rxblock(&self) -> RXBLOCK_R

Bit 3 - Block Incoming Data

pub fn txtri(&self) -> TXTRI_R

Bit 4 - Transmitter Tristated

pub fn txc(&self) -> TXC_R

Bit 5 - TX Complete

pub fn txbl(&self) -> TXBL_R

Bit 6 - TX Buffer Level

pub fn rxdatav(&self) -> RXDATAV_R

Bit 7 - RX Data Valid

pub fn rxfull(&self) -> RXFULL_R

Bit 8 - RX FIFO Full

pub fn txbdright(&self) -> TXBDRIGHT_R

Bit 9 - TX Buffer Expects Double Right Data

pub fn txbsright(&self) -> TXBSRIGHT_R

Bit 10 - TX Buffer Expects Single Right Data

pub fn rxdatavright(&self) -> RXDATAVRIGHT_R

Bit 11 - RX Data Right

pub fn rxfullright(&self) -> RXFULLRIGHT_R

Bit 12 - RX Full of Right Data

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle

pub fn timerrestarted(&self) -> TIMERRESTARTED_R

Bit 14 - The USART Timer Restarted Itself

pub fn txbufcnt(&self) -> TXBUFCNT_R

Bits 16:17 - TX Buffer Count

impl R<u32, Reg<u32, _CLKDIV>>

pub fn div(&self) -> DIV_R

Bits 3:22 - Fractional Clock Divider

pub fn autobauden(&self) -> AUTOBAUDEN_R

Bit 31 - AUTOBAUD Detection Enable

impl R<u32, Reg<u32, _RXDATAX>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:8 - RX Data

pub fn perr(&self) -> PERR_R

Bit 14 - Data Parity Error

pub fn ferr(&self) -> FERR_R

Bit 15 - Data Framing Error

impl R<u32, Reg<u32, _RXDATA>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:7 - RX Data

impl R<u32, Reg<u32, _RXDOUBLEX>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:8 - RX Data 0

pub fn perr0(&self) -> PERR0_R

Bit 14 - Data Parity Error 0

pub fn ferr0(&self) -> FERR0_R

Bit 15 - Data Framing Error 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 16:24 - RX Data 1

pub fn perr1(&self) -> PERR1_R

Bit 30 - Data Parity Error 1

pub fn ferr1(&self) -> FERR1_R

Bit 31 - Data Framing Error 1

impl R<u32, Reg<u32, _RXDOUBLE>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:7 - RX Data 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 8:15 - RX Data 1

impl R<u32, Reg<u32, _RXDATAXP>>

pub fn rxdatap(&self) -> RXDATAP_R

Bits 0:8 - RX Data Peek

pub fn perrp(&self) -> PERRP_R

Bit 14 - Data Parity Error Peek

pub fn ferrp(&self) -> FERRP_R

Bit 15 - Data Framing Error Peek

impl R<u32, Reg<u32, _RXDOUBLEXP>>

pub fn rxdatap0(&self) -> RXDATAP0_R

Bits 0:8 - RX Data 0 Peek

pub fn perrp0(&self) -> PERRP0_R

Bit 14 - Data Parity Error 0 Peek

pub fn ferrp0(&self) -> FERRP0_R

Bit 15 - Data Framing Error 0 Peek

pub fn rxdatap1(&self) -> RXDATAP1_R

Bits 16:24 - RX Data 1 Peek

pub fn perrp1(&self) -> PERRP1_R

Bit 30 - Data Parity Error 1 Peek

pub fn ferrp1(&self) -> FERRP1_R

Bit 31 - Data Framing Error 1 Peek

impl R<u32, Reg<u32, _TXDATAX>>

pub fn txdatax(&self) -> TXDATAX_R

Bits 0:8 - TX Data

pub fn ubrxat(&self) -> UBRXAT_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat(&self) -> TXTRIAT_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak(&self) -> TXBREAK_R

Bit 13 - Transmit Data as Break

pub fn txdisat(&self) -> TXDISAT_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat(&self) -> RXENAT_R

Bit 15 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDATA>>

pub fn txdata(&self) -> TXDATA_R

Bits 0:7 - TX Data

impl R<u32, Reg<u32, _TXDOUBLEX>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:8 - TX Data

pub fn ubrxat0(&self) -> UBRXAT0_R

Bit 11 - Unblock RX After Transmission

pub fn txtriat0(&self) -> TXTRIAT0_R

Bit 12 - Set TXTRI After Transmission

pub fn txbreak0(&self) -> TXBREAK0_R

Bit 13 - Transmit Data as Break

pub fn txdisat0(&self) -> TXDISAT0_R

Bit 14 - Clear TXEN After Transmission

pub fn rxenat0(&self) -> RXENAT0_R

Bit 15 - Enable RX After Transmission

pub fn txdata1(&self) -> TXDATA1_R

Bits 16:24 - TX Data

pub fn ubrxat1(&self) -> UBRXAT1_R

Bit 27 - Unblock RX After Transmission

pub fn txtriat1(&self) -> TXTRIAT1_R

Bit 28 - Set TXTRI After Transmission

pub fn txbreak1(&self) -> TXBREAK1_R

Bit 29 - Transmit Data as Break

pub fn txdisat1(&self) -> TXDISAT1_R

Bit 30 - Clear TXEN After Transmission

pub fn rxenat1(&self) -> RXENAT1_R

Bit 31 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDOUBLE>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:7 - TX Data

pub fn txdata1(&self) -> TXDATA1_R

Bits 8:15 - TX Data

impl R<u32, Reg<u32, _IF>>

pub fn txc(&self) -> TXC_R

Bit 0 - TX Complete Interrupt Flag

pub fn txbl(&self) -> TXBL_R

Bit 1 - TX Buffer Level Interrupt Flag

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RX Data Valid Interrupt Flag

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RX Buffer Full Interrupt Flag

pub fn rxof(&self) -> RXOF_R

Bit 4 - RX Overflow Interrupt Flag

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RX Underflow Interrupt Flag

pub fn txof(&self) -> TXOF_R

Bit 6 - TX Overflow Interrupt Flag

pub fn txuf(&self) -> TXUF_R

Bit 7 - TX Underflow Interrupt Flag

pub fn perr(&self) -> PERR_R

Bit 8 - Parity Error Interrupt Flag

pub fn ferr(&self) -> FERR_R

Bit 9 - Framing Error Interrupt Flag

pub fn mpaf(&self) -> MPAF_R

Bit 10 - Multi-Processor Address Frame Interrupt Flag

pub fn ssm(&self) -> SSM_R

Bit 11 - Slave-Select in Master Mode Interrupt Flag

pub fn ccf(&self) -> CCF_R

Bit 12 - Collision Check Fail Interrupt Flag

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TX Idle Interrupt Flag

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - Timer Comparator 0 Interrupt Flag

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - Timer Comparator 1 Interrupt Flag

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - Timer Comparator 2 Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn txc(&self) -> TXC_R

Bit 0 - TXC Interrupt Enable

pub fn txbl(&self) -> TXBL_R

Bit 1 - TXBL Interrupt Enable

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RXDATAV Interrupt Enable

pub fn rxfull(&self) -> RXFULL_R

Bit 3 - RXFULL Interrupt Enable

pub fn rxof(&self) -> RXOF_R

Bit 4 - RXOF Interrupt Enable

pub fn rxuf(&self) -> RXUF_R

Bit 5 - RXUF Interrupt Enable

pub fn txof(&self) -> TXOF_R

Bit 6 - TXOF Interrupt Enable

pub fn txuf(&self) -> TXUF_R

Bit 7 - TXUF Interrupt Enable

pub fn perr(&self) -> PERR_R

Bit 8 - PERR Interrupt Enable

pub fn ferr(&self) -> FERR_R

Bit 9 - FERR Interrupt Enable

pub fn mpaf(&self) -> MPAF_R

Bit 10 - MPAF Interrupt Enable

pub fn ssm(&self) -> SSM_R

Bit 11 - SSM Interrupt Enable

pub fn ccf(&self) -> CCF_R

Bit 12 - CCF Interrupt Enable

pub fn txidle(&self) -> TXIDLE_R

Bit 13 - TXIDLE Interrupt Enable

pub fn tcmp0(&self) -> TCMP0_R

Bit 14 - TCMP0 Interrupt Enable

pub fn tcmp1(&self) -> TCMP1_R

Bit 15 - TCMP1 Interrupt Enable

pub fn tcmp2(&self) -> TCMP2_R

Bit 16 - TCMP2 Interrupt Enable

impl R<u8, IRPW_A>

pub fn variant(&self) -> IRPW_A

Get enumerated values variant

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

impl R<u8, IRPRSSEL_A>

pub fn variant(&self) -> Variant<u8, IRPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _IRCTRL>>

pub fn iren(&self) -> IREN_R

Bit 0 - Enable IrDA Module

pub fn irpw(&self) -> IRPW_R

Bits 1:2 - IrDA TX Pulse Width

pub fn irfilt(&self) -> IRFILT_R

Bit 3 - IrDA RX Filter

pub fn irprsen(&self) -> IRPRSEN_R

Bit 7 - IrDA PRS Channel Enable

pub fn irprssel(&self) -> IRPRSSEL_R

Bits 8:12 - IrDA PRS Channel Select

impl R<u8, RXPRSSEL_A>

pub fn variant(&self) -> Variant<u8, RXPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, CLKPRSSEL_A>

pub fn variant(&self) -> Variant<u8, CLKPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _INPUT>>

pub fn rxprssel(&self) -> RXPRSSEL_R

Bits 0:4 - RX PRS Channel Select

pub fn rxprs(&self) -> RXPRS_R

Bit 7 - PRS RX Enable

pub fn clkprssel(&self) -> CLKPRSSEL_R

Bits 8:12 - CLK PRS Channel Select

pub fn clkprs(&self) -> CLKPRS_R

Bit 15 - PRS CLK Enable

impl R<u8, FORMAT_A>

pub fn variant(&self) -> FORMAT_A

Get enumerated values variant

pub fn is_w32d32(&self) -> bool

Checks if the value of the field is W32D32

pub fn is_w32d24m(&self) -> bool

Checks if the value of the field is W32D24M

pub fn is_w32d24(&self) -> bool

Checks if the value of the field is W32D24

pub fn is_w32d16(&self) -> bool

Checks if the value of the field is W32D16

pub fn is_w32d8(&self) -> bool

Checks if the value of the field is W32D8

pub fn is_w16d16(&self) -> bool

Checks if the value of the field is W16D16

pub fn is_w16d8(&self) -> bool

Checks if the value of the field is W16D8

pub fn is_w8d8(&self) -> bool

Checks if the value of the field is W8D8

impl R<u32, Reg<u32, _I2SCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable I2S Mode

pub fn mono(&self) -> MONO_R

Bit 1 - Stero or Mono

pub fn justify(&self) -> JUSTIFY_R

Bit 2 - Justification of I2S Data

pub fn dmasplit(&self) -> DMASPLIT_R

Bit 3 - Separate DMA Request for Left/Right Data

pub fn delay(&self) -> DELAY_R

Bit 4 - Delay on I2S Data

pub fn format(&self) -> FORMAT_R

Bits 8:10 - I2S Word Format

impl R<u8, TXDELAY_A>

pub fn variant(&self) -> TXDELAY_A

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSSETUP_A>

pub fn variant(&self) -> CSSETUP_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, ICS_A>

pub fn variant(&self) -> ICS_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u8, CSHOLD_A>

pub fn variant(&self) -> CSHOLD_A

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_seven(&self) -> bool

Checks if the value of the field is SEVEN

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

impl R<u32, Reg<u32, _TIMING>>

pub fn txdelay(&self) -> TXDELAY_R

Bits 16:18 - TX Frame Start Delay

pub fn cssetup(&self) -> CSSETUP_R

Bits 20:22 - Chip Select Setup

pub fn ics(&self) -> ICS_R

Bits 24:26 - Inter-character Spacing

pub fn cshold(&self) -> CSHOLD_R

Bits 28:30 - Chip Select Hold

impl R<u32, Reg<u32, _CTRLX>>

pub fn dbghalt(&self) -> DBGHALT_R

Bit 0 - Debug Halt

pub fn ctsinv(&self) -> CTSINV_R

Bit 1 - CTS Pin Inversion

pub fn ctsen(&self) -> CTSEN_R

Bit 2 - CTS Function Enabled

pub fn rtsinv(&self) -> RTSINV_R

Bit 3 - RTS Pin Inversion

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp0(&self) -> bool

Checks if the value of the field is TCMP0

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP0>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 0

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 0

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP0

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp1(&self) -> bool

Checks if the value of the field is TCMP1

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP1>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 1

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 1

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP1

impl R<u8, TSTART_A>

pub fn variant(&self) -> Variant<u8, TSTART_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_txeof(&self) -> bool

Checks if the value of the field is TXEOF

pub fn is_txc(&self) -> bool

Checks if the value of the field is TXC

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxeof(&self) -> bool

Checks if the value of the field is RXEOF

impl R<u8, TSTOP_A>

pub fn variant(&self) -> Variant<u8, TSTOP_A>

Get enumerated values variant

pub fn is_tcmp2(&self) -> bool

Checks if the value of the field is TCMP2

pub fn is_txst(&self) -> bool

Checks if the value of the field is TXST

pub fn is_rxact(&self) -> bool

Checks if the value of the field is RXACT

pub fn is_rxactn(&self) -> bool

Checks if the value of the field is RXACTN

impl R<u32, Reg<u32, _TIMECMP2>>

pub fn tcmpval(&self) -> TCMPVAL_R

Bits 0:7 - Timer Comparator 2

pub fn tstart(&self) -> TSTART_R

Bits 16:18 - Timer Start Source

pub fn tstop(&self) -> TSTOP_R

Bits 20:22 - Source Used to Disable Comparator 2

pub fn restarten(&self) -> RESTARTEN_R

Bit 24 - Restart Timer on TCMP2

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn rxpen(&self) -> RXPEN_R

Bit 0 - RX Pin Enable

pub fn txpen(&self) -> TXPEN_R

Bit 1 - TX Pin Enable

pub fn cspen(&self) -> CSPEN_R

Bit 2 - CS Pin Enable

pub fn clkpen(&self) -> CLKPEN_R

Bit 3 - CLK Pin Enable

pub fn ctspen(&self) -> CTSPEN_R

Bit 4 - CTS Pin Enable

pub fn rtspen(&self) -> RTSPEN_R

Bit 5 - RTS Pin Enable

impl R<u8, RXLOC_A>

pub fn variant(&self) -> Variant<u8, RXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, TXLOC_A>

pub fn variant(&self) -> Variant<u8, TXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CSLOC_A>

pub fn variant(&self) -> Variant<u8, CSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, CLKLOC_A>

pub fn variant(&self) -> Variant<u8, CLKLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn rxloc(&self) -> RXLOC_R

Bits 0:5 - I/O Location

pub fn txloc(&self) -> TXLOC_R

Bits 8:13 - I/O Location

pub fn csloc(&self) -> CSLOC_R

Bits 16:21 - I/O Location

pub fn clkloc(&self) -> CLKLOC_R

Bits 24:29 - I/O Location

impl R<u8, CTSLOC_A>

pub fn variant(&self) -> Variant<u8, CTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u8, RTSLOC_A>

pub fn variant(&self) -> Variant<u8, RTSLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

impl R<u32, Reg<u32, _ROUTELOC1>>

pub fn ctsloc(&self) -> CTSLOC_R

Bits 0:5 - I/O Location

pub fn rtsloc(&self) -> RTSLOC_R

Bits 8:13 - I/O Location

impl R<u32, Reg<u32, _CONFIG>>

pub fn enbspi(&self) -> ENBSPI_R

Bit 0 - QSPI Enable

pub fn selclkpol(&self) -> SELCLKPOL_R

Bit 1 - Clock Polarity, CPOL

pub fn selclkphase(&self) -> SELCLKPHASE_R

Bit 2 - Clock Phase, CPHA

pub fn phymodeenable(&self) -> PHYMODEENABLE_R

Bit 3 - PHY Mode Enable

pub fn enbdiraccctlr(&self) -> ENBDIRACCCTLR_R

Bit 7 - Enable Direct Access Controller

pub fn enblegacyipmode(&self) -> ENBLEGACYIPMODE_R

Bit 8 - Legacy IP Mode Enable

pub fn periphseldec(&self) -> PERIPHSELDEC_R

Bit 9 - Peripheral Select Decode

pub fn periphcslines(&self) -> PERIPHCSLINES_R

Bits 10:11 - Peripheral Chip Select Lines

pub fn wrprotflash(&self) -> WRPROTFLASH_R

Bit 14 - Write Protect Flash Pin

pub fn enbahbaddrremap(&self) -> ENBAHBADDRREMAP_R

Bit 16 - Enable Address Remapping

pub fn enterxipmode(&self) -> ENTERXIPMODE_R

Bit 17 - Enter XIP Mode on Next READ

pub fn enterxipmodeimm(&self) -> ENTERXIPMODEIMM_R

Bit 18 - Enter XIP Mode Immediately

pub fn mstrbauddiv(&self) -> MSTRBAUDDIV_R

Bits 19:22 - Master Mode Baud Rate Divisor

pub fn enableahbdecoder(&self) -> ENABLEAHBDECODER_R

Bit 23 - Enable Address Decoder

pub fn enabledtrprotocol(&self) -> ENABLEDTRPROTOCOL_R

Bit 24 - Enable DTR Protocol

pub fn pipelinephy(&self) -> PIPELINEPHY_R

Bit 25 - Pipeline PHY Mode Enable

pub fn crcenable(&self) -> CRCENABLE_R

Bit 29 - CRC Enable Bit

pub fn dualbyteopcodeen(&self) -> DUALBYTEOPCODEEN_R

Bit 30 - Dual-byte Opcode Mode Enable Bit

pub fn idle(&self) -> IDLE_R

Bit 31 - Serial Interface and Low Level SPI Pipeline is IDLE

impl R<u32, Reg<u32, _DEVINSTRRDCONFIG>>

pub fn rdopcodenonxip(&self) -> RDOPCODENONXIP_R

Bits 0:7 - Read Opcode in Non-XIP Mode

pub fn instrtype(&self) -> INSTRTYPE_R

Bits 8:9 - Instruction Type

pub fn ddren(&self) -> DDREN_R

Bit 10 - DDR Enable

pub fn addrxfertypestdmode(&self) -> ADDRXFERTYPESTDMODE_R

Bits 12:13 - Address Transfer Type for Standard SPI Modes

pub fn dataxfertypeextmode(&self) -> DATAXFERTYPEEXTMODE_R

Bits 16:17 - Data Transfer Type for Standard SPI Modes

pub fn modebitenable(&self) -> MODEBITENABLE_R

Bit 20 - Mode Bit Enable

pub fn dummyrdclkcycles(&self) -> DUMMYRDCLKCYCLES_R

Bits 24:28 - Dummy Read Clock Cycles

impl R<u32, Reg<u32, _DEVINSTRWRCONFIG>>

pub fn wropcode(&self) -> WROPCODE_R

Bits 0:7 - Write Opcode

pub fn weldis(&self) -> WELDIS_R

Bit 8 - WEL Disable

pub fn addrxfertypestdmode(&self) -> ADDRXFERTYPESTDMODE_R

Bits 12:13 - Address Transfer Type for Standard SPI Modes

pub fn dataxfertypeextmode(&self) -> DATAXFERTYPEEXTMODE_R

Bits 16:17 - Data Transfer Type for Standard SPI Modes

pub fn dummywrclkcycles(&self) -> DUMMYWRCLKCYCLES_R

Bits 24:28 - Dummy Write Clock Cycles

impl R<u32, Reg<u32, _DEVDELAY>>

pub fn dinit(&self) -> DINIT_R

Bits 0:7 - Clock Delay for CS

pub fn dafter(&self) -> DAFTER_R

Bits 8:15 - Clock Delay for Last Transaction Bit

pub fn dbtwn(&self) -> DBTWN_R

Bits 16:23 - Clock Delay Between Two Chip Selects

pub fn dnss(&self) -> DNSS_R

Bits 24:31 - Clock Delay for Chip Select Deassert

impl R<u32, Reg<u32, _RDDATACAPTURE>>

pub fn bypass(&self) -> BYPASS_R

Bit 0 - Bypass the Adapted Loopback Clock Circuit

pub fn delay(&self) -> DELAY_R

Bits 1:4 - Read Delay

pub fn dqsenable(&self) -> DQSENABLE_R

Bit 8 - DQS Enable Bit

pub fn ddrreaddelay(&self) -> DDRREADDELAY_R

Bits 16:19 - DDR Read Delay

impl R<u32, Reg<u32, _DEVSIZECONFIG>>

pub fn numaddrbytes(&self) -> NUMADDRBYTES_R

Bits 0:3 - Number of Address Bytes

pub fn bytesperdevicepage(&self) -> BYTESPERDEVICEPAGE_R

Bits 4:15 - Number of Bytes Per Device Page

pub fn bytespersubsector(&self) -> BYTESPERSUBSECTOR_R

Bits 16:20 - Number of Bytes Per Block

pub fn memsizeoncs0(&self) -> MEMSIZEONCS0_R

Bits 21:22 - Size of Flash Device Connected to CS[0] Pin

pub fn memsizeoncs1(&self) -> MEMSIZEONCS1_R

Bits 23:24 - Size of Flash Device Connected to CS[1] Pin

impl R<u32, Reg<u32, _SRAMPARTITIONCFG>>

pub fn addr(&self) -> ADDR_R

Bits 0:7 - Indirect Read Partition Size

impl R<u32, Reg<u32, _INDAHBADDRTRIGGER>>

pub fn addr(&self) -> ADDR_R

Bits 0:31 - Indirect Address Trigger Register

impl R<u32, Reg<u32, _REMAPADDR>>

pub fn value(&self) -> VALUE_R

Bits 0:31 - Remap Address Value

impl R<u32, Reg<u32, _MODEBITCONFIG>>

pub fn mode(&self) -> MODE_R

Bits 0:7 - Mode Bits

pub fn chunksize(&self) -> CHUNKSIZE_R

Bits 8:10 - Chunk Size

pub fn crcoutenable(&self) -> CRCOUTENABLE_R

Bit 15 - CRC# Output Enable Bit

pub fn rxcrcdataup(&self) -> RXCRCDATAUP_R

Bits 16:23 - RX CRC Data (upper)

pub fn rxcrcdatalow(&self) -> RXCRCDATALOW_R

Bits 24:31 - RX CRC Data (lower)

impl R<u32, Reg<u32, _SRAMFILL>>

pub fn sramfillindacread(&self) -> SRAMFILLINDACREAD_R

Bits 0:15 - SRAM Fill Level (Indirect Read Partition)

pub fn sramfillindacwrite(&self) -> SRAMFILLINDACWRITE_R

Bits 16:31 - SRAM Fill Level (Indirect Write Partition)

impl R<u32, Reg<u32, _TXTHRESH>>

pub fn level(&self) -> LEVEL_R

Bits 0:4 - Threshold Level

impl R<u32, Reg<u32, _RXTHRESH>>

pub fn level(&self) -> LEVEL_R

Bits 0:4 - Threshold Level

impl R<u32, Reg<u32, _WRITECOMPLETIONCTRL>>

pub fn opcode(&self) -> OPCODE_R

Bits 0:7 - Opcode

pub fn pollingbitindex(&self) -> POLLINGBITINDEX_R

Bits 8:10 - Polling Bit Index

pub fn pollingpolarity(&self) -> POLLINGPOLARITY_R

Bit 13 - Polling Polarity

pub fn disablepolling(&self) -> DISABLEPOLLING_R

Bit 14 - Disable Polling

pub fn enablepollingexp(&self) -> ENABLEPOLLINGEXP_R

Bit 15 - Enable Polling Expiration

pub fn pollcount(&self) -> POLLCOUNT_R

Bits 16:23 - Poll Count

pub fn pollrepdelay(&self) -> POLLREPDELAY_R

Bits 24:31 - Poll Repetition Delay

impl R<u32, Reg<u32, _NOOFPOLLSBEFEXP>>

pub fn noofpollsbefexp(&self) -> NOOFPOLLSBEFEXP_R

Bits 0:31 - Number of Polls Cycles Before Expiration

impl R<u32, Reg<u32, _IRQSTATUS>>

pub fn modemfail(&self) -> MODEMFAIL_R

Bit 0 - Mode M Failure

pub fn underflowdet(&self) -> UNDERFLOWDET_R

Bit 1 - Underflow Detected

pub fn indirectopdone(&self) -> INDIRECTOPDONE_R

Bit 2 - Indirect Operation Complete

pub fn indirectreadreject(&self) -> INDIRECTREADREJECT_R

Bit 3 - Indirect Operation Was Requested but Could Not Be Accepted

pub fn protwrattempt(&self) -> PROTWRATTEMPT_R

Bit 4 - Write to Protected Area Was Attempted and Rejected

pub fn illegalaccessdet(&self) -> ILLEGALACCESSDET_R

Bit 5 - Illegal Memory Access Has Been Detected

pub fn indirectxferlevelbreach(&self) -> INDIRECTXFERLEVELBREACH_R

Bit 6 - Indirect Transfer Watermark Level Breached

pub fn recvoverflow(&self) -> RECVOVERFLOW_R

Bit 7 - Receive Overflow

pub fn txfifonotfull(&self) -> TXFIFONOTFULL_R

Bit 8 - Small TX FIFO Not Full

pub fn txfifofull(&self) -> TXFIFOFULL_R

Bit 9 - Small TX FIFO Full

pub fn rxfifonotempty(&self) -> RXFIFONOTEMPTY_R

Bit 10 - Small RX FIFO Not Empty

pub fn rxfifofull(&self) -> RXFIFOFULL_R

Bit 11 - Small RX FIFO Full

pub fn indrdsramfull(&self) -> INDRDSRAMFULL_R

Bit 12 - Indirect Read Partition Overflow

pub fn pollexpint(&self) -> POLLEXPINT_R

Bit 13 - The Maximum Number of Programmed Polls Cycles is Expired

pub fn stigreqint(&self) -> STIGREQINT_R

Bit 14 - The Controller is Ready for Getting Another STIG Request

pub fn rxcrcdataerr(&self) -> RXCRCDATAERR_R

Bit 16 - RX CRC Data Error

pub fn rxcrcdataval(&self) -> RXCRCDATAVAL_R

Bit 17 - RX CRC Data Valid

pub fn txcrcchunkbrk(&self) -> TXCRCCHUNKBRK_R

Bit 18 - TX CRC Chunk Was Broken

impl R<u32, Reg<u32, _IRQMASK>>

pub fn modemfailmask(&self) -> MODEMFAILMASK_R

Bit 0 - Mode M Failure Mask

pub fn underflowdetmask(&self) -> UNDERFLOWDETMASK_R

Bit 1 - Underflow Detected Mask

pub fn indirectopdonemask(&self) -> INDIRECTOPDONEMASK_R

Bit 2 - Indirect Complete Mask

pub fn indirectreadrejectmask(&self) -> INDIRECTREADREJECTMASK_R

Bit 3 - Indirect Read Reject Mask

pub fn protwrattemptmask(&self) -> PROTWRATTEMPTMASK_R

Bit 4 - Protected Area Write Attempt Mask

pub fn illegalaccessdetmask(&self) -> ILLEGALACCESSDETMASK_R

Bit 5 - Illegal Access Detected Mask

pub fn indirectxferlevelbreachmask(&self) -> INDIRECTXFERLEVELBREACHMASK_R

Bit 6 - Transfer Watermark Breach Mask

pub fn recvoverflowmask(&self) -> RECVOVERFLOWMASK_R

Bit 7 - Receive Overflow Mask

pub fn txfifonotfullmask(&self) -> TXFIFONOTFULLMASK_R

Bit 8 - Small TX FIFO Not Full Mask

pub fn txfifofullmask(&self) -> TXFIFOFULLMASK_R

Bit 9 - Small TX FIFO Full Mask

pub fn rxfifonotemptymask(&self) -> RXFIFONOTEMPTYMASK_R

Bit 10 - Small RX FIFO Not Empty Mask

pub fn rxfifofullmask(&self) -> RXFIFOFULLMASK_R

Bit 11 - Small RX FIFO Full Mask

pub fn indrdsramfullmask(&self) -> INDRDSRAMFULLMASK_R

Bit 12 - Indirect Read Partition Overflow Mask

pub fn pollexpintmask(&self) -> POLLEXPINTMASK_R

Bit 13 - Polling Expiration Detected Mask

pub fn stigreqmask(&self) -> STIGREQMASK_R

Bit 14 - STIG Request Completion Mask

pub fn rxcrcdataerrmask(&self) -> RXCRCDATAERRMASK_R

Bit 16 - RX CRC Data Error Mask

pub fn rxcrcdatavalmask(&self) -> RXCRCDATAVALMASK_R

Bit 17 - RX CRC Data Valid Mask

pub fn txcrcchunkbrkmask(&self) -> TXCRCCHUNKBRKMASK_R

Bit 18 - TX CRC Chunk Was Broken Mask

impl R<u32, Reg<u32, _LOWERWRPROT>>

pub fn subsector(&self) -> SUBSECTOR_R

Bits 0:31 - Lower Block Number

impl R<u32, Reg<u32, _UPPERWRPROT>>

pub fn subsector(&self) -> SUBSECTOR_R

Bits 0:31 - Upper Block Number

impl R<u32, Reg<u32, _WRPROTCTRL>>

pub fn inv(&self) -> INV_R

Bit 0 - Write Protection Inversion Bit

pub fn enb(&self) -> ENB_R

Bit 1 - Write Protection Enable Bit

impl R<u32, Reg<u32, _INDIRECTREADXFERCTRL>>

pub fn rdstatus(&self) -> RDSTATUS_R

Bit 2 - Indirect Read Status

pub fn sramfull(&self) -> SRAMFULL_R

Bit 3 - SRAM Full

pub fn rdqueued(&self) -> RDQUEUED_R

Bit 4 - Two Indirect Read Operations Have Been Queued

pub fn indopsdonestatus(&self) -> INDOPSDONESTATUS_R

Bit 5 - Indirect Completion Status

pub fn numindopsdone(&self) -> NUMINDOPSDONE_R

Bits 6:7 - Number Indirect Operations Done

impl R<u32, Reg<u32, _INDIRECTREADXFERWATERMARK>>

pub fn level(&self) -> LEVEL_R

Bits 0:31 - Watermark Value

impl R<u32, Reg<u32, _INDIRECTREADXFERSTART>>

pub fn addr(&self) -> ADDR_R

Bits 0:31 - Indirect Read Transfer Start Address

impl R<u32, Reg<u32, _INDIRECTREADXFERNUMBYTES>>

pub fn value(&self) -> VALUE_R

Bits 0:31 - Indirect Read Transfer Number Bytes

impl R<u32, Reg<u32, _INDIRECTWRITEXFERCTRL>>

pub fn wrstatus(&self) -> WRSTATUS_R

Bit 2 - Indirect Write Status

pub fn wrqueued(&self) -> WRQUEUED_R

Bit 4 - Two Indirect Write Operations Have Been Queued

pub fn indopsdonestatus(&self) -> INDOPSDONESTATUS_R

Bit 5 - Indirect Completion Status

pub fn numindopsdone(&self) -> NUMINDOPSDONE_R

Bits 6:7 - Indirect Operations Done

impl R<u32, Reg<u32, _INDIRECTWRITEXFERWATERMARK>>

pub fn level(&self) -> LEVEL_R

Bits 0:31 - Watermark Value

impl R<u32, Reg<u32, _INDIRECTWRITEXFERSTART>>

pub fn addr(&self) -> ADDR_R

Bits 0:31 - Start of Indirect Access

impl R<u32, Reg<u32, _INDIRECTWRITEXFERNUMBYTES>>

pub fn value(&self) -> VALUE_R

Bits 0:31 - Indirect Number of Bytes

impl R<u32, Reg<u32, _INDIRECTTRIGGERADDRRANGE>>

pub fn indrangewidth(&self) -> INDRANGEWIDTH_R

Bits 0:3 - Indirect Trigger Address Width

impl R<u32, Reg<u32, _FLASHCOMMANDCTRLMEM>>

pub fn membankreqinprogress(&self) -> MEMBANKREQINPROGRESS_R

Bit 1 - Memory Bank Data Request in Progress

pub fn membankreaddata(&self) -> MEMBANKREADDATA_R

Bits 8:15 - Last Requested Data From the STIG Memory Bank

pub fn nbofstigreadbytes(&self) -> NBOFSTIGREADBYTES_R

Bits 16:18 - Number of Read Bytes for the Extended STIG

pub fn membankaddr(&self) -> MEMBANKADDR_R

Bits 20:28 - Memory Bank Address

impl R<u32, Reg<u32, _FLASHCMDCTRL>>

pub fn cmdexecstatus(&self) -> CMDEXECSTATUS_R

Bit 1 - Command Execution in Progress

pub fn stigmembanken(&self) -> STIGMEMBANKEN_R

Bit 2 - STIG Memory Bank Enable Bit

pub fn numdummycycles(&self) -> NUMDUMMYCYCLES_R

Bits 7:11 - Number of Dummy Cycles

pub fn numwrdatabytes(&self) -> NUMWRDATABYTES_R

Bits 12:14 - Number of Write Data Bytes

pub fn enbwritedata(&self) -> ENBWRITEDATA_R

Bit 15 - Write Data Enable

pub fn numaddrbytes(&self) -> NUMADDRBYTES_R

Bits 16:17 - Number of Address Bytes

pub fn enbmodebit(&self) -> ENBMODEBIT_R

Bit 18 - Mode Bit Enable

pub fn enbcomdaddr(&self) -> ENBCOMDADDR_R

Bit 19 - Command Address Enable

pub fn numrddatabytes(&self) -> NUMRDDATABYTES_R

Bits 20:22 - Number of Read Data Bytes

pub fn enbreaddata(&self) -> ENBREADDATA_R

Bit 23 - Read Data Enable

pub fn cmdopcode(&self) -> CMDOPCODE_R

Bits 24:31 - Command Opcode

impl R<u32, Reg<u32, _FLASHCMDADDR>>

pub fn addr(&self) -> ADDR_R

Bits 0:31 - Command Address

impl R<u32, Reg<u32, _FLASHRDDATALOWER>>

pub fn data(&self) -> DATA_R

Bits 0:31 - Read Data Lower

impl R<u32, Reg<u32, _FLASHRDDATAUPPER>>

pub fn data(&self) -> DATA_R

Bits 0:31 - Read Data Upper

impl R<u32, Reg<u32, _FLASHWRDATALOWER>>

pub fn data(&self) -> DATA_R

Bits 0:31 - Command Write Data Lower Byte

impl R<u32, Reg<u32, _FLASHWRDATAUPPER>>

pub fn data(&self) -> DATA_R

Bits 0:31 - Command Write Data Upper Byte

impl R<u32, Reg<u32, _POLLINGFLASHSTATUS>>

pub fn devicestatus(&self) -> DEVICESTATUS_R

Bits 0:7 - Device Status

pub fn devicestatusvalid(&self) -> DEVICESTATUSVALID_R

Bit 8 - Device Status Valid

pub fn devicestatusnbdummy(&self) -> DEVICESTATUSNBDUMMY_R

Bits 16:19 - Auto-polling Dummy Cycles

impl R<u32, Reg<u32, _PHYCONFIGURATION>>

pub fn phyconfigrxdlldelay(&self) -> PHYCONFIGRXDLLDELAY_R

Bits 0:6 - RX DLL Delay

pub fn phyconfigtxdlldelay(&self) -> PHYCONFIGTXDLLDELAY_R

Bits 16:22 - TX DLL Delay

impl R<u32, Reg<u32, _OPCODEEXTLOWER>>

pub fn extstigopcode(&self) -> EXTSTIGOPCODE_R

Bits 0:7 - STIG Opcode Extension

pub fn extpollopcode(&self) -> EXTPOLLOPCODE_R

Bits 8:15 - Polling Opcode Extension

pub fn extwriteopcode(&self) -> EXTWRITEOPCODE_R

Bits 16:23 - Write Opcode Extension

pub fn extreadopcode(&self) -> EXTREADOPCODE_R

Bits 24:31 - Read Opcode Extension

impl R<u32, Reg<u32, _OPCODEEXTUPPER>>

pub fn extwelopcode(&self) -> EXTWELOPCODE_R

Bits 16:23 - WEL Opcode Extension

pub fn welopcode(&self) -> WELOPCODE_R

Bits 24:31 - WEL Opcode

impl R<u32, Reg<u32, _MODULEID>>

pub fn conf(&self) -> CONF_R

Bits 0:1 - Configuration ID Number

pub fn moduleid(&self) -> MODULEID_R

Bits 8:23 - Module/Revision ID Number

pub fn fixpatch(&self) -> FIXPATCH_R

Bits 24:31 - Fix/patch Number

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn sclkpen(&self) -> SCLKPEN_R

Bit 0 - SCLK Pin Enable

pub fn cs0pen(&self) -> CS0PEN_R

Bit 1 - CS0 Pin Enable

pub fn cs1pen(&self) -> CS1PEN_R

Bit 2 - CS1 Pin Enable

pub fn dq0pen(&self) -> DQ0PEN_R

Bit 5 - DQ0 Pin Enable

pub fn dq1pen(&self) -> DQ1PEN_R

Bit 6 - DQ1 Pin Enable

pub fn dq2pen(&self) -> DQ2PEN_R

Bit 7 - DQ2 Pin Enable

pub fn dq3pen(&self) -> DQ3PEN_R

Bit 8 - DQ3 Pin Enable

pub fn dq4pen(&self) -> DQ4PEN_R

Bit 9 - DQ4 Pin Enable

pub fn dq5pen(&self) -> DQ5PEN_R

Bit 10 - DQ5 Pin Enable

pub fn dq6pen(&self) -> DQ6PEN_R

Bit 11 - DQ6 Pin Enable

pub fn dq7pen(&self) -> DQ7PEN_R

Bit 12 - DQ7 Pin Enable

pub fn dqspen(&self) -> DQSPEN_R

Bit 13 - DQS Pin Enable

pub fn sclkinpen(&self) -> SCLKINPEN_R

Bit 14 - SCLKIN Pin Enable

impl R<u8, QSPILOC_A>

pub fn variant(&self) -> Variant<u8, QSPILOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn qspiloc(&self) -> QSPILOC_R

Bits 0:5 - I/O Location

impl R<u8, PARITY_A>

pub fn variant(&self) -> Variant<u8, PARITY_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_even(&self) -> bool

Checks if the value of the field is EVEN

pub fn is_odd(&self) -> bool

Checks if the value of the field is ODD

impl R<u8, TXDELAY_A>

pub fn variant(&self) -> TXDELAY_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_single(&self) -> bool

Checks if the value of the field is SINGLE

pub fn is_double(&self) -> bool

Checks if the value of the field is DOUBLE

pub fn is_triple(&self) -> bool

Checks if the value of the field is TRIPLE

impl R<u32, Reg<u32, _CTRL>>

pub fn autotri(&self) -> AUTOTRI_R

Bit 0 - Automatic Transmitter Tristate

pub fn databits(&self) -> DATABITS_R

Bit 1 - Data-Bit Mode

pub fn parity(&self) -> PARITY_R

Bits 2:3 - Parity-Bit Mode

pub fn stopbits(&self) -> STOPBITS_R

Bit 4 - Stop-Bit Mode

pub fn inv(&self) -> INV_R

Bit 5 - Invert Input and Output

pub fn errsdma(&self) -> ERRSDMA_R

Bit 6 - Clear RX DMA on Error

pub fn loopbk(&self) -> LOOPBK_R

Bit 7 - Loopback Enable

pub fn sfubrx(&self) -> SFUBRX_R

Bit 8 - Start-Frame UnBlock RX

pub fn mpm(&self) -> MPM_R

Bit 9 - Multi-Processor Mode

pub fn mpab(&self) -> MPAB_R

Bit 10 - Multi-Processor Address-Bit

pub fn bit8dv(&self) -> BIT8DV_R

Bit 11 - Bit 8 Default Value

pub fn rxdmawu(&self) -> RXDMAWU_R

Bit 12 - RX DMA Wakeup

pub fn txdmawu(&self) -> TXDMAWU_R

Bit 13 - TX DMA Wakeup

pub fn txdelay(&self) -> TXDELAY_R

Bits 14:15 - TX Delay Transmission

impl R<u32, Reg<u32, _STATUS>>

pub fn rxens(&self) -> RXENS_R

Bit 0 - Receiver Enable Status

pub fn txens(&self) -> TXENS_R

Bit 1 - Transmitter Enable Status

pub fn rxblock(&self) -> RXBLOCK_R

Bit 2 - Block Incoming Data

pub fn txc(&self) -> TXC_R

Bit 3 - TX Complete

pub fn txbl(&self) -> TXBL_R

Bit 4 - TX Buffer Level

pub fn rxdatav(&self) -> RXDATAV_R

Bit 5 - RX Data Valid

pub fn txidle(&self) -> TXIDLE_R

Bit 6 - TX Idle

impl R<u32, Reg<u32, _CLKDIV>>

pub fn div(&self) -> DIV_R

Bits 3:16 - Fractional Clock Divider

impl R<u32, Reg<u32, _STARTFRAME>>

pub fn startframe(&self) -> STARTFRAME_R

Bits 0:8 - Start Frame

impl R<u32, Reg<u32, _SIGFRAME>>

pub fn sigframe(&self) -> SIGFRAME_R

Bits 0:8 - Signal Frame

impl R<u32, Reg<u32, _RXDATAX>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:8 - RX Data

pub fn perr(&self) -> PERR_R

Bit 14 - Receive Data Parity Error

pub fn ferr(&self) -> FERR_R

Bit 15 - Receive Data Framing Error

impl R<u32, Reg<u32, _RXDATA>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:7 - RX Data

impl R<u32, Reg<u32, _RXDATAXP>>

pub fn rxdatap(&self) -> RXDATAP_R

Bits 0:8 - RX Data Peek

pub fn perrp(&self) -> PERRP_R

Bit 14 - Receive Data Parity Error Peek

pub fn ferrp(&self) -> FERRP_R

Bit 15 - Receive Data Framing Error Peek

impl R<u32, Reg<u32, _TXDATAX>>

pub fn txdata(&self) -> TXDATA_R

Bits 0:8 - TX Data

pub fn txbreak(&self) -> TXBREAK_R

Bit 13 - Transmit Data as Break

pub fn txdisat(&self) -> TXDISAT_R

Bit 14 - Disable TX After Transmission

pub fn rxenat(&self) -> RXENAT_R

Bit 15 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDATA>>

pub fn txdata(&self) -> TXDATA_R

Bits 0:7 - TX Data

impl R<u32, Reg<u32, _IF>>

pub fn txc(&self) -> TXC_R

Bit 0 - TX Complete Interrupt Flag

pub fn txbl(&self) -> TXBL_R

Bit 1 - TX Buffer Level Interrupt Flag

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RX Data Valid Interrupt Flag

pub fn rxof(&self) -> RXOF_R

Bit 3 - RX Overflow Interrupt Flag

pub fn rxuf(&self) -> RXUF_R

Bit 4 - RX Underflow Interrupt Flag

pub fn txof(&self) -> TXOF_R

Bit 5 - TX Overflow Interrupt Flag

pub fn perr(&self) -> PERR_R

Bit 6 - Parity Error Interrupt Flag

pub fn ferr(&self) -> FERR_R

Bit 7 - Framing Error Interrupt Flag

pub fn mpaf(&self) -> MPAF_R

Bit 8 - Multi-Processor Address Frame Interrupt Flag

pub fn startf(&self) -> STARTF_R

Bit 9 - Start Frame Interrupt Flag

pub fn sigf(&self) -> SIGF_R

Bit 10 - Signal Frame Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn txc(&self) -> TXC_R

Bit 0 - TXC Interrupt Enable

pub fn txbl(&self) -> TXBL_R

Bit 1 - TXBL Interrupt Enable

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RXDATAV Interrupt Enable

pub fn rxof(&self) -> RXOF_R

Bit 3 - RXOF Interrupt Enable

pub fn rxuf(&self) -> RXUF_R

Bit 4 - RXUF Interrupt Enable

pub fn txof(&self) -> TXOF_R

Bit 5 - TXOF Interrupt Enable

pub fn perr(&self) -> PERR_R

Bit 6 - PERR Interrupt Enable

pub fn ferr(&self) -> FERR_R

Bit 7 - FERR Interrupt Enable

pub fn mpaf(&self) -> MPAF_R

Bit 8 - MPAF Interrupt Enable

pub fn startf(&self) -> STARTF_R

Bit 9 - STARTF Interrupt Enable

pub fn sigf(&self) -> SIGF_R

Bit 10 - SIGF Interrupt Enable

impl R<u32, Reg<u32, _PULSECTRL>>

pub fn pulsew(&self) -> PULSEW_R

Bits 0:3 - Pulse Width

pub fn pulseen(&self) -> PULSEEN_R

Bit 4 - Pulse Generator/Extender Enable

pub fn pulsefilt(&self) -> PULSEFILT_R

Bit 5 - Pulse Filter

impl R<u32, Reg<u32, _FREEZE>>

pub fn regfreeze(&self) -> REGFREEZE_R

Bit 0 - Register Update Freeze

impl R<u32, Reg<u32, _SYNCBUSY>>

pub fn ctrl(&self) -> CTRL_R

Bit 0 - CTRL Register Busy

pub fn cmd(&self) -> CMD_R

Bit 1 - CMD Register Busy

pub fn clkdiv(&self) -> CLKDIV_R

Bit 2 - CLKDIV Register Busy

pub fn startframe(&self) -> STARTFRAME_R

Bit 3 - STARTFRAME Register Busy

pub fn sigframe(&self) -> SIGFRAME_R

Bit 4 - SIGFRAME Register Busy

pub fn txdatax(&self) -> TXDATAX_R

Bit 5 - TXDATAX Register Busy

pub fn txdata(&self) -> TXDATA_R

Bit 6 - TXDATA Register Busy

pub fn pulsectrl(&self) -> PULSECTRL_R

Bit 7 - PULSECTRL Register Busy

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn rxpen(&self) -> RXPEN_R

Bit 0 - RX Pin Enable

pub fn txpen(&self) -> TXPEN_R

Bit 1 - TX Pin Enable

impl R<u8, RXLOC_A>

pub fn variant(&self) -> Variant<u8, RXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

impl R<u8, TXLOC_A>

pub fn variant(&self) -> Variant<u8, TXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn rxloc(&self) -> RXLOC_R

Bits 0:5 - I/O Location

pub fn txloc(&self) -> TXLOC_R

Bits 8:13 - I/O Location

impl R<u8, RXPRSSEL_A>

pub fn variant(&self) -> Variant<u8, RXPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _INPUT>>

pub fn rxprssel(&self) -> RXPRSSEL_R

Bits 0:4 - RX PRS Channel Select

pub fn rxprs(&self) -> RXPRS_R

Bit 5 - PRS RX Enable

impl R<u8, PARITY_A>

pub fn variant(&self) -> Variant<u8, PARITY_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_even(&self) -> bool

Checks if the value of the field is EVEN

pub fn is_odd(&self) -> bool

Checks if the value of the field is ODD

impl R<u8, TXDELAY_A>

pub fn variant(&self) -> TXDELAY_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_single(&self) -> bool

Checks if the value of the field is SINGLE

pub fn is_double(&self) -> bool

Checks if the value of the field is DOUBLE

pub fn is_triple(&self) -> bool

Checks if the value of the field is TRIPLE

impl R<u32, Reg<u32, _CTRL>>

pub fn autotri(&self) -> AUTOTRI_R

Bit 0 - Automatic Transmitter Tristate

pub fn databits(&self) -> DATABITS_R

Bit 1 - Data-Bit Mode

pub fn parity(&self) -> PARITY_R

Bits 2:3 - Parity-Bit Mode

pub fn stopbits(&self) -> STOPBITS_R

Bit 4 - Stop-Bit Mode

pub fn inv(&self) -> INV_R

Bit 5 - Invert Input and Output

pub fn errsdma(&self) -> ERRSDMA_R

Bit 6 - Clear RX DMA on Error

pub fn loopbk(&self) -> LOOPBK_R

Bit 7 - Loopback Enable

pub fn sfubrx(&self) -> SFUBRX_R

Bit 8 - Start-Frame UnBlock RX

pub fn mpm(&self) -> MPM_R

Bit 9 - Multi-Processor Mode

pub fn mpab(&self) -> MPAB_R

Bit 10 - Multi-Processor Address-Bit

pub fn bit8dv(&self) -> BIT8DV_R

Bit 11 - Bit 8 Default Value

pub fn rxdmawu(&self) -> RXDMAWU_R

Bit 12 - RX DMA Wakeup

pub fn txdmawu(&self) -> TXDMAWU_R

Bit 13 - TX DMA Wakeup

pub fn txdelay(&self) -> TXDELAY_R

Bits 14:15 - TX Delay Transmission

impl R<u32, Reg<u32, _STATUS>>

pub fn rxens(&self) -> RXENS_R

Bit 0 - Receiver Enable Status

pub fn txens(&self) -> TXENS_R

Bit 1 - Transmitter Enable Status

pub fn rxblock(&self) -> RXBLOCK_R

Bit 2 - Block Incoming Data

pub fn txc(&self) -> TXC_R

Bit 3 - TX Complete

pub fn txbl(&self) -> TXBL_R

Bit 4 - TX Buffer Level

pub fn rxdatav(&self) -> RXDATAV_R

Bit 5 - RX Data Valid

pub fn txidle(&self) -> TXIDLE_R

Bit 6 - TX Idle

impl R<u32, Reg<u32, _CLKDIV>>

pub fn div(&self) -> DIV_R

Bits 3:16 - Fractional Clock Divider

impl R<u32, Reg<u32, _STARTFRAME>>

pub fn startframe(&self) -> STARTFRAME_R

Bits 0:8 - Start Frame

impl R<u32, Reg<u32, _SIGFRAME>>

pub fn sigframe(&self) -> SIGFRAME_R

Bits 0:8 - Signal Frame

impl R<u32, Reg<u32, _RXDATAX>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:8 - RX Data

pub fn perr(&self) -> PERR_R

Bit 14 - Receive Data Parity Error

pub fn ferr(&self) -> FERR_R

Bit 15 - Receive Data Framing Error

impl R<u32, Reg<u32, _RXDATA>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:7 - RX Data

impl R<u32, Reg<u32, _RXDATAXP>>

pub fn rxdatap(&self) -> RXDATAP_R

Bits 0:8 - RX Data Peek

pub fn perrp(&self) -> PERRP_R

Bit 14 - Receive Data Parity Error Peek

pub fn ferrp(&self) -> FERRP_R

Bit 15 - Receive Data Framing Error Peek

impl R<u32, Reg<u32, _TXDATAX>>

pub fn txdata(&self) -> TXDATA_R

Bits 0:8 - TX Data

pub fn txbreak(&self) -> TXBREAK_R

Bit 13 - Transmit Data as Break

pub fn txdisat(&self) -> TXDISAT_R

Bit 14 - Disable TX After Transmission

pub fn rxenat(&self) -> RXENAT_R

Bit 15 - Enable RX After Transmission

impl R<u32, Reg<u32, _TXDATA>>

pub fn txdata(&self) -> TXDATA_R

Bits 0:7 - TX Data

impl R<u32, Reg<u32, _IF>>

pub fn txc(&self) -> TXC_R

Bit 0 - TX Complete Interrupt Flag

pub fn txbl(&self) -> TXBL_R

Bit 1 - TX Buffer Level Interrupt Flag

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RX Data Valid Interrupt Flag

pub fn rxof(&self) -> RXOF_R

Bit 3 - RX Overflow Interrupt Flag

pub fn rxuf(&self) -> RXUF_R

Bit 4 - RX Underflow Interrupt Flag

pub fn txof(&self) -> TXOF_R

Bit 5 - TX Overflow Interrupt Flag

pub fn perr(&self) -> PERR_R

Bit 6 - Parity Error Interrupt Flag

pub fn ferr(&self) -> FERR_R

Bit 7 - Framing Error Interrupt Flag

pub fn mpaf(&self) -> MPAF_R

Bit 8 - Multi-Processor Address Frame Interrupt Flag

pub fn startf(&self) -> STARTF_R

Bit 9 - Start Frame Interrupt Flag

pub fn sigf(&self) -> SIGF_R

Bit 10 - Signal Frame Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn txc(&self) -> TXC_R

Bit 0 - TXC Interrupt Enable

pub fn txbl(&self) -> TXBL_R

Bit 1 - TXBL Interrupt Enable

pub fn rxdatav(&self) -> RXDATAV_R

Bit 2 - RXDATAV Interrupt Enable

pub fn rxof(&self) -> RXOF_R

Bit 3 - RXOF Interrupt Enable

pub fn rxuf(&self) -> RXUF_R

Bit 4 - RXUF Interrupt Enable

pub fn txof(&self) -> TXOF_R

Bit 5 - TXOF Interrupt Enable

pub fn perr(&self) -> PERR_R

Bit 6 - PERR Interrupt Enable

pub fn ferr(&self) -> FERR_R

Bit 7 - FERR Interrupt Enable

pub fn mpaf(&self) -> MPAF_R

Bit 8 - MPAF Interrupt Enable

pub fn startf(&self) -> STARTF_R

Bit 9 - STARTF Interrupt Enable

pub fn sigf(&self) -> SIGF_R

Bit 10 - SIGF Interrupt Enable

impl R<u32, Reg<u32, _PULSECTRL>>

pub fn pulsew(&self) -> PULSEW_R

Bits 0:3 - Pulse Width

pub fn pulseen(&self) -> PULSEEN_R

Bit 4 - Pulse Generator/Extender Enable

pub fn pulsefilt(&self) -> PULSEFILT_R

Bit 5 - Pulse Filter

impl R<u32, Reg<u32, _FREEZE>>

pub fn regfreeze(&self) -> REGFREEZE_R

Bit 0 - Register Update Freeze

impl R<u32, Reg<u32, _SYNCBUSY>>

pub fn ctrl(&self) -> CTRL_R

Bit 0 - CTRL Register Busy

pub fn cmd(&self) -> CMD_R

Bit 1 - CMD Register Busy

pub fn clkdiv(&self) -> CLKDIV_R

Bit 2 - CLKDIV Register Busy

pub fn startframe(&self) -> STARTFRAME_R

Bit 3 - STARTFRAME Register Busy

pub fn sigframe(&self) -> SIGFRAME_R

Bit 4 - SIGFRAME Register Busy

pub fn txdatax(&self) -> TXDATAX_R

Bit 5 - TXDATAX Register Busy

pub fn txdata(&self) -> TXDATA_R

Bit 6 - TXDATA Register Busy

pub fn pulsectrl(&self) -> PULSECTRL_R

Bit 7 - PULSECTRL Register Busy

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn rxpen(&self) -> RXPEN_R

Bit 0 - RX Pin Enable

pub fn txpen(&self) -> TXPEN_R

Bit 1 - TX Pin Enable

impl R<u8, RXLOC_A>

pub fn variant(&self) -> Variant<u8, RXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

impl R<u8, TXLOC_A>

pub fn variant(&self) -> Variant<u8, TXLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn rxloc(&self) -> RXLOC_R

Bits 0:5 - I/O Location

pub fn txloc(&self) -> TXLOC_R

Bits 8:13 - I/O Location

impl R<u8, RXPRSSEL_A>

pub fn variant(&self) -> Variant<u8, RXPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _INPUT>>

pub fn rxprssel(&self) -> RXPRSSEL_R

Bits 0:4 - RX PRS Channel Select

pub fn rxprs(&self) -> RXPRS_R

Bit 5 - PRS RX Enable

impl R<u8, REPMODE_A>

pub fn variant(&self) -> REPMODE_A

Get enumerated values variant

pub fn is_free(&self) -> bool

Checks if the value of the field is FREE

pub fn is_oneshot(&self) -> bool

Checks if the value of the field is ONESHOT

pub fn is_buffered(&self) -> bool

Checks if the value of the field is BUFFERED

pub fn is_double(&self) -> bool

Checks if the value of the field is DOUBLE

impl R<u8, UFOA0_A>

pub fn variant(&self) -> UFOA0_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_pulse(&self) -> bool

Checks if the value of the field is PULSE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, UFOA1_A>

pub fn variant(&self) -> UFOA1_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_pulse(&self) -> bool

Checks if the value of the field is PULSE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u32, Reg<u32, _CTRL>>

pub fn repmode(&self) -> REPMODE_R

Bits 0:1 - Repeat Mode

pub fn ufoa0(&self) -> UFOA0_R

Bits 2:3 - Underflow Output Action 0

pub fn ufoa1(&self) -> UFOA1_R

Bits 4:5 - Underflow Output Action 1

pub fn opol0(&self) -> OPOL0_R

Bit 6 - Output 0 Polarity

pub fn opol1(&self) -> OPOL1_R

Bit 7 - Output 1 Polarity

pub fn buftop(&self) -> BUFTOP_R

Bit 8 - Buffered Top

pub fn comp0top(&self) -> COMP0TOP_R

Bit 9 - Compare Value 0 is Top Value

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 12 - Debug Mode Run Enable

impl R<u32, Reg<u32, _STATUS>>

pub fn running(&self) -> RUNNING_R

Bit 0 - LETIMER Running

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:15 - Counter Value

impl R<u32, Reg<u32, _COMP0>>

pub fn comp0(&self) -> COMP0_R

Bits 0:15 - Compare Value 0

impl R<u32, Reg<u32, _COMP1>>

pub fn comp1(&self) -> COMP1_R

Bits 0:15 - Compare Value 1

impl R<u32, Reg<u32, _REP0>>

pub fn rep0(&self) -> REP0_R

Bits 0:7 - Repeat Counter 0

impl R<u32, Reg<u32, _REP1>>

pub fn rep1(&self) -> REP1_R

Bits 0:7 - Repeat Counter 1

impl R<u32, Reg<u32, _IF>>

pub fn comp0(&self) -> COMP0_R

Bit 0 - Compare Match 0 Interrupt Flag

pub fn comp1(&self) -> COMP1_R

Bit 1 - Compare Match 1 Interrupt Flag

pub fn uf(&self) -> UF_R

Bit 2 - Underflow Interrupt Flag

pub fn rep0(&self) -> REP0_R

Bit 3 - Repeat Counter 0 Interrupt Flag

pub fn rep1(&self) -> REP1_R

Bit 4 - Repeat Counter 1 Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn comp0(&self) -> COMP0_R

Bit 0 - COMP0 Interrupt Enable

pub fn comp1(&self) -> COMP1_R

Bit 1 - COMP1 Interrupt Enable

pub fn uf(&self) -> UF_R

Bit 2 - UF Interrupt Enable

pub fn rep0(&self) -> REP0_R

Bit 3 - REP0 Interrupt Enable

pub fn rep1(&self) -> REP1_R

Bit 4 - REP1 Interrupt Enable

impl R<u32, Reg<u32, _SYNCBUSY>>

pub fn cmd(&self) -> CMD_R

Bit 1 - CMD Register Busy

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn out0pen(&self) -> OUT0PEN_R

Bit 0 - Output 0 Pin Enable

pub fn out1pen(&self) -> OUT1PEN_R

Bit 1 - Output 1 Pin Enable

impl R<u8, OUT0LOC_A>

pub fn variant(&self) -> Variant<u8, OUT0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, OUT1LOC_A>

pub fn variant(&self) -> Variant<u8, OUT1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn out0loc(&self) -> OUT0LOC_R

Bits 0:5 - I/O Location

pub fn out1loc(&self) -> OUT1LOC_R

Bits 8:13 - I/O Location

impl R<u8, PRSSTARTSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSTARTSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, PRSSTOPSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSTOPSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, PRSCLEARSEL_A>

pub fn variant(&self) -> Variant<u8, PRSCLEARSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, PRSSTARTMODE_A>

pub fn variant(&self) -> PRSSTARTMODE_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

impl R<u8, PRSSTOPMODE_A>

pub fn variant(&self) -> PRSSTOPMODE_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

impl R<u8, PRSCLEARMODE_A>

pub fn variant(&self) -> PRSCLEARMODE_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

impl R<u32, Reg<u32, _PRSSEL>>

pub fn prsstartsel(&self) -> PRSSTARTSEL_R

Bits 0:4 - PRS Start Select

pub fn prsstopsel(&self) -> PRSSTOPSEL_R

Bits 6:10 - PRS Stop Select

pub fn prsclearsel(&self) -> PRSCLEARSEL_R

Bits 12:16 - PRS Clear Select

pub fn prsstartmode(&self) -> PRSSTARTMODE_R

Bits 18:19 - PRS Start Mode

pub fn prsstopmode(&self) -> PRSSTOPMODE_R

Bits 22:23 - PRS Stop Mode

pub fn prsclearmode(&self) -> PRSCLEARMODE_R

Bits 26:27 - PRS Clear Mode

impl R<u8, REPMODE_A>

pub fn variant(&self) -> REPMODE_A

Get enumerated values variant

pub fn is_free(&self) -> bool

Checks if the value of the field is FREE

pub fn is_oneshot(&self) -> bool

Checks if the value of the field is ONESHOT

pub fn is_buffered(&self) -> bool

Checks if the value of the field is BUFFERED

pub fn is_double(&self) -> bool

Checks if the value of the field is DOUBLE

impl R<u8, UFOA0_A>

pub fn variant(&self) -> UFOA0_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_pulse(&self) -> bool

Checks if the value of the field is PULSE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u8, UFOA1_A>

pub fn variant(&self) -> UFOA1_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_pulse(&self) -> bool

Checks if the value of the field is PULSE

pub fn is_pwm(&self) -> bool

Checks if the value of the field is PWM

impl R<u32, Reg<u32, _CTRL>>

pub fn repmode(&self) -> REPMODE_R

Bits 0:1 - Repeat Mode

pub fn ufoa0(&self) -> UFOA0_R

Bits 2:3 - Underflow Output Action 0

pub fn ufoa1(&self) -> UFOA1_R

Bits 4:5 - Underflow Output Action 1

pub fn opol0(&self) -> OPOL0_R

Bit 6 - Output 0 Polarity

pub fn opol1(&self) -> OPOL1_R

Bit 7 - Output 1 Polarity

pub fn buftop(&self) -> BUFTOP_R

Bit 8 - Buffered Top

pub fn comp0top(&self) -> COMP0TOP_R

Bit 9 - Compare Value 0 is Top Value

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 12 - Debug Mode Run Enable

impl R<u32, Reg<u32, _STATUS>>

pub fn running(&self) -> RUNNING_R

Bit 0 - LETIMER Running

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:15 - Counter Value

impl R<u32, Reg<u32, _COMP0>>

pub fn comp0(&self) -> COMP0_R

Bits 0:15 - Compare Value 0

impl R<u32, Reg<u32, _COMP1>>

pub fn comp1(&self) -> COMP1_R

Bits 0:15 - Compare Value 1

impl R<u32, Reg<u32, _REP0>>

pub fn rep0(&self) -> REP0_R

Bits 0:7 - Repeat Counter 0

impl R<u32, Reg<u32, _REP1>>

pub fn rep1(&self) -> REP1_R

Bits 0:7 - Repeat Counter 1

impl R<u32, Reg<u32, _IF>>

pub fn comp0(&self) -> COMP0_R

Bit 0 - Compare Match 0 Interrupt Flag

pub fn comp1(&self) -> COMP1_R

Bit 1 - Compare Match 1 Interrupt Flag

pub fn uf(&self) -> UF_R

Bit 2 - Underflow Interrupt Flag

pub fn rep0(&self) -> REP0_R

Bit 3 - Repeat Counter 0 Interrupt Flag

pub fn rep1(&self) -> REP1_R

Bit 4 - Repeat Counter 1 Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn comp0(&self) -> COMP0_R

Bit 0 - COMP0 Interrupt Enable

pub fn comp1(&self) -> COMP1_R

Bit 1 - COMP1 Interrupt Enable

pub fn uf(&self) -> UF_R

Bit 2 - UF Interrupt Enable

pub fn rep0(&self) -> REP0_R

Bit 3 - REP0 Interrupt Enable

pub fn rep1(&self) -> REP1_R

Bit 4 - REP1 Interrupt Enable

impl R<u32, Reg<u32, _SYNCBUSY>>

pub fn cmd(&self) -> CMD_R

Bit 1 - CMD Register Busy

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn out0pen(&self) -> OUT0PEN_R

Bit 0 - Output 0 Pin Enable

pub fn out1pen(&self) -> OUT1PEN_R

Bit 1 - Output 1 Pin Enable

impl R<u8, OUT0LOC_A>

pub fn variant(&self) -> Variant<u8, OUT0LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, OUT1LOC_A>

pub fn variant(&self) -> Variant<u8, OUT1LOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn out0loc(&self) -> OUT0LOC_R

Bits 0:5 - I/O Location

pub fn out1loc(&self) -> OUT1LOC_R

Bits 8:13 - I/O Location

impl R<u8, PRSSTARTSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSTARTSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, PRSSTOPSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSTOPSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, PRSCLEARSEL_A>

pub fn variant(&self) -> Variant<u8, PRSCLEARSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, PRSSTARTMODE_A>

pub fn variant(&self) -> PRSSTARTMODE_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

impl R<u8, PRSSTOPMODE_A>

pub fn variant(&self) -> PRSSTOPMODE_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

impl R<u8, PRSCLEARMODE_A>

pub fn variant(&self) -> PRSCLEARMODE_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

impl R<u32, Reg<u32, _PRSSEL>>

pub fn prsstartsel(&self) -> PRSSTARTSEL_R

Bits 0:4 - PRS Start Select

pub fn prsstopsel(&self) -> PRSSTOPSEL_R

Bits 6:10 - PRS Stop Select

pub fn prsclearsel(&self) -> PRSCLEARSEL_R

Bits 12:16 - PRS Clear Select

pub fn prsstartmode(&self) -> PRSSTARTMODE_R

Bits 18:19 - PRS Start Mode

pub fn prsstopmode(&self) -> PRSSTOPMODE_R

Bits 22:23 - PRS Stop Mode

pub fn prsclearmode(&self) -> PRSCLEARMODE_R

Bits 26:27 - PRS Clear Mode

impl R<u8, OSCSEL_A>

pub fn variant(&self) -> OSCSEL_A

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_lfrco(&self) -> bool

Checks if the value of the field is LFRCO

pub fn is_lfxo(&self) -> bool

Checks if the value of the field is LFXO

pub fn is_ulfrco(&self) -> bool

Checks if the value of the field is ULFRCO

impl R<u8, PRESC_A>

pub fn variant(&self) -> PRESC_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

impl R<u32, Reg<u32, _CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable CRYOTIMER

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 1 - Debug Mode Run Enable

pub fn oscsel(&self) -> OSCSEL_R

Bits 2:3 - Select Low Frequency Oscillator

pub fn presc(&self) -> PRESC_R

Bits 5:7 - Prescaler Setting

impl R<u32, Reg<u32, _PERIODSEL>>

pub fn periodsel(&self) -> PERIODSEL_R

Bits 0:5 - Interrupts/Wakeup Events Period Setting

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:31 - Counter Value

impl R<u32, Reg<u32, _EM4WUEN>>

pub fn em4wu(&self) -> EM4WU_R

Bit 0 - EM4 Wake-up Enable

impl R<u32, Reg<u32, _IF>>

pub fn period(&self) -> PERIOD_R

Bit 0 - Wakeup Event/Interrupt

impl R<u32, Reg<u32, _IEN>>

pub fn period(&self) -> PERIOD_R

Bit 0 - PERIOD Interrupt Enable

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_ovssingle(&self) -> bool

Checks if the value of the field is OVSSINGLE

pub fn is_extclksingle(&self) -> bool

Checks if the value of the field is EXTCLKSINGLE

pub fn is_extclkquad(&self) -> bool

Checks if the value of the field is EXTCLKQUAD

pub fn is_ovsquad1x(&self) -> bool

Checks if the value of the field is OVSQUAD1X

pub fn is_ovsquad2x(&self) -> bool

Checks if the value of the field is OVSQUAD2X

pub fn is_ovsquad4x(&self) -> bool

Checks if the value of the field is OVSQUAD4X

impl R<u8, CNTEV_A>

pub fn variant(&self) -> CNTEV_A

Get enumerated values variant

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, AUXCNTEV_A>

pub fn variant(&self) -> AUXCNTEV_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

impl R<u8, TCCMODE_A>

pub fn variant(&self) -> Variant<u8, TCCMODE_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_lfa(&self) -> bool

Checks if the value of the field is LFA

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

impl R<u8, TCCPRESC_A>

pub fn variant(&self) -> TCCPRESC_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

impl R<u8, TCCCOMP_A>

pub fn variant(&self) -> Variant<u8, TCCCOMP_A>

Get enumerated values variant

pub fn is_ltoe(&self) -> bool

Checks if the value of the field is LTOE

pub fn is_gtoe(&self) -> bool

Checks if the value of the field is GTOE

pub fn is_range(&self) -> bool

Checks if the value of the field is RANGE

impl R<u8, TCCPRSSEL_A>

pub fn variant(&self) -> Variant<u8, TCCPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:2 - Mode Select

pub fn filt(&self) -> FILT_R

Bit 3 - Enable Digital Pulse Width Filter

pub fn rsten(&self) -> RSTEN_R

Bit 4 - Enable PCNT Clock Domain Reset

pub fn cntrsten(&self) -> CNTRSTEN_R

Bit 5 - Enable CNT Reset

pub fn auxcntrsten(&self) -> AUXCNTRSTEN_R

Bit 6 - Enable AUXCNT Reset

pub fn debughalt(&self) -> DEBUGHALT_R

Bit 7 - Debug Mode Halt Enable

pub fn hyst(&self) -> HYST_R

Bit 8 - Enable Hysteresis

pub fn s1cdir(&self) -> S1CDIR_R

Bit 9 - Count Direction Determined By S1

pub fn cntev(&self) -> CNTEV_R

Bits 10:11 - Controls When the Counter Counts

pub fn auxcntev(&self) -> AUXCNTEV_R

Bits 12:13 - Controls When the Auxiliary Counter Counts

pub fn cntdir(&self) -> CNTDIR_R

Bit 14 - Non-Quadrature Mode Counter Direction Control

pub fn edge(&self) -> EDGE_R

Bit 15 - Edge Select

pub fn tccmode(&self) -> TCCMODE_R

Bits 16:17 - Sets the Mode for Triggered Compare and Clear

pub fn tccpresc(&self) -> TCCPRESC_R

Bits 19:20 - Set the LFA Prescaler for Triggered Compare and Clear

pub fn tcccomp(&self) -> TCCCOMP_R

Bits 22:23 - Triggered Compare and Clear Compare Mode

pub fn prsgateen(&self) -> PRSGATEEN_R

Bit 24 - PRS Gate Enable

pub fn tccprspol(&self) -> TCCPRSPOL_R

Bit 25 - TCC PRS Polarity Select

pub fn tccprssel(&self) -> TCCPRSSEL_R

Bits 26:30 - TCC PRS Channel Select

pub fn topbhfsel(&self) -> TOPBHFSEL_R

Bit 31 - TOPB High Frequency Value Select

impl R<u32, Reg<u32, _STATUS>>

pub fn dir(&self) -> DIR_R

Bit 0 - Current Counter Direction

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:15 - Counter Value

impl R<u32, Reg<u32, _TOP>>

pub fn top(&self) -> TOP_R

Bits 0:15 - Counter Top Value

impl R<u32, Reg<u32, _TOPB>>

pub fn topb(&self) -> TOPB_R

Bits 0:15 - Counter Top Buffer

impl R<u32, Reg<u32, _IF>>

pub fn uf(&self) -> UF_R

Bit 0 - Underflow Interrupt Read Flag

pub fn of(&self) -> OF_R

Bit 1 - Overflow Interrupt Read Flag

pub fn dircng(&self) -> DIRCNG_R

Bit 2 - Direction Change Detect Interrupt Flag

pub fn auxof(&self) -> AUXOF_R

Bit 3 - Auxiliary Overflow Interrupt Read Flag

pub fn tcc(&self) -> TCC_R

Bit 4 - Triggered Compare Interrupt Read Flag

pub fn oqsterr(&self) -> OQSTERR_R

Bit 5 - Oversampling Quadrature State Error Interrupt

impl R<u32, Reg<u32, _IEN>>

pub fn uf(&self) -> UF_R

Bit 0 - UF Interrupt Enable

pub fn of(&self) -> OF_R

Bit 1 - OF Interrupt Enable

pub fn dircng(&self) -> DIRCNG_R

Bit 2 - DIRCNG Interrupt Enable

pub fn auxof(&self) -> AUXOF_R

Bit 3 - AUXOF Interrupt Enable

pub fn tcc(&self) -> TCC_R

Bit 4 - TCC Interrupt Enable

pub fn oqsterr(&self) -> OQSTERR_R

Bit 5 - OQSTERR Interrupt Enable

impl R<u8, S0INLOC_A>

pub fn variant(&self) -> Variant<u8, S0INLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, S1INLOC_A>

pub fn variant(&self) -> Variant<u8, S1INLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn s0inloc(&self) -> S0INLOC_R

Bits 0:5 - I/O Location

pub fn s1inloc(&self) -> S1INLOC_R

Bits 8:13 - I/O Location

impl R<u32, Reg<u32, _FREEZE>>

pub fn regfreeze(&self) -> REGFREEZE_R

Bit 0 - Register Update Freeze

impl R<u32, Reg<u32, _SYNCBUSY>>

pub fn ctrl(&self) -> CTRL_R

Bit 0 - CTRL Register Busy

pub fn cmd(&self) -> CMD_R

Bit 1 - CMD Register Busy

pub fn topb(&self) -> TOPB_R

Bit 2 - TOPB Register Busy

pub fn ovscfg(&self) -> OVSCFG_R

Bit 3 - OVSCFG Register Busy

impl R<u32, Reg<u32, _AUXCNT>>

pub fn auxcnt(&self) -> AUXCNT_R

Bits 0:15 - Auxiliary Counter Value

impl R<u8, S0PRSSEL_A>

pub fn variant(&self) -> Variant<u8, S0PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, S1PRSSEL_A>

pub fn variant(&self) -> Variant<u8, S1PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _INPUT>>

pub fn s0prssel(&self) -> S0PRSSEL_R

Bits 0:4 - S0IN PRS Channel Select

pub fn s0prsen(&self) -> S0PRSEN_R

Bit 5 - S0IN PRS Enable

pub fn s1prssel(&self) -> S1PRSSEL_R

Bits 6:10 - S1IN PRS Channel Select

pub fn s1prsen(&self) -> S1PRSEN_R

Bit 11 - S1IN PRS Enable

impl R<u32, Reg<u32, _OVSCFG>>

pub fn filtlen(&self) -> FILTLEN_R

Bits 0:7 - Configure Filter Length for Inputs S0IN and S1IN

pub fn flutterrm(&self) -> FLUTTERRM_R

Bit 12 - Flutter Remove

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_ovssingle(&self) -> bool

Checks if the value of the field is OVSSINGLE

pub fn is_extclksingle(&self) -> bool

Checks if the value of the field is EXTCLKSINGLE

pub fn is_extclkquad(&self) -> bool

Checks if the value of the field is EXTCLKQUAD

pub fn is_ovsquad1x(&self) -> bool

Checks if the value of the field is OVSQUAD1X

pub fn is_ovsquad2x(&self) -> bool

Checks if the value of the field is OVSQUAD2X

pub fn is_ovsquad4x(&self) -> bool

Checks if the value of the field is OVSQUAD4X

impl R<u8, CNTEV_A>

pub fn variant(&self) -> CNTEV_A

Get enumerated values variant

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, AUXCNTEV_A>

pub fn variant(&self) -> AUXCNTEV_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

impl R<u8, TCCMODE_A>

pub fn variant(&self) -> Variant<u8, TCCMODE_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_lfa(&self) -> bool

Checks if the value of the field is LFA

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

impl R<u8, TCCPRESC_A>

pub fn variant(&self) -> TCCPRESC_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

impl R<u8, TCCCOMP_A>

pub fn variant(&self) -> Variant<u8, TCCCOMP_A>

Get enumerated values variant

pub fn is_ltoe(&self) -> bool

Checks if the value of the field is LTOE

pub fn is_gtoe(&self) -> bool

Checks if the value of the field is GTOE

pub fn is_range(&self) -> bool

Checks if the value of the field is RANGE

impl R<u8, TCCPRSSEL_A>

pub fn variant(&self) -> Variant<u8, TCCPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:2 - Mode Select

pub fn filt(&self) -> FILT_R

Bit 3 - Enable Digital Pulse Width Filter

pub fn rsten(&self) -> RSTEN_R

Bit 4 - Enable PCNT Clock Domain Reset

pub fn cntrsten(&self) -> CNTRSTEN_R

Bit 5 - Enable CNT Reset

pub fn auxcntrsten(&self) -> AUXCNTRSTEN_R

Bit 6 - Enable AUXCNT Reset

pub fn debughalt(&self) -> DEBUGHALT_R

Bit 7 - Debug Mode Halt Enable

pub fn hyst(&self) -> HYST_R

Bit 8 - Enable Hysteresis

pub fn s1cdir(&self) -> S1CDIR_R

Bit 9 - Count Direction Determined By S1

pub fn cntev(&self) -> CNTEV_R

Bits 10:11 - Controls When the Counter Counts

pub fn auxcntev(&self) -> AUXCNTEV_R

Bits 12:13 - Controls When the Auxiliary Counter Counts

pub fn cntdir(&self) -> CNTDIR_R

Bit 14 - Non-Quadrature Mode Counter Direction Control

pub fn edge(&self) -> EDGE_R

Bit 15 - Edge Select

pub fn tccmode(&self) -> TCCMODE_R

Bits 16:17 - Sets the Mode for Triggered Compare and Clear

pub fn tccpresc(&self) -> TCCPRESC_R

Bits 19:20 - Set the LFA Prescaler for Triggered Compare and Clear

pub fn tcccomp(&self) -> TCCCOMP_R

Bits 22:23 - Triggered Compare and Clear Compare Mode

pub fn prsgateen(&self) -> PRSGATEEN_R

Bit 24 - PRS Gate Enable

pub fn tccprspol(&self) -> TCCPRSPOL_R

Bit 25 - TCC PRS Polarity Select

pub fn tccprssel(&self) -> TCCPRSSEL_R

Bits 26:30 - TCC PRS Channel Select

pub fn topbhfsel(&self) -> TOPBHFSEL_R

Bit 31 - TOPB High Frequency Value Select

impl R<u32, Reg<u32, _STATUS>>

pub fn dir(&self) -> DIR_R

Bit 0 - Current Counter Direction

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:15 - Counter Value

impl R<u32, Reg<u32, _TOP>>

pub fn top(&self) -> TOP_R

Bits 0:15 - Counter Top Value

impl R<u32, Reg<u32, _TOPB>>

pub fn topb(&self) -> TOPB_R

Bits 0:15 - Counter Top Buffer

impl R<u32, Reg<u32, _IF>>

pub fn uf(&self) -> UF_R

Bit 0 - Underflow Interrupt Read Flag

pub fn of(&self) -> OF_R

Bit 1 - Overflow Interrupt Read Flag

pub fn dircng(&self) -> DIRCNG_R

Bit 2 - Direction Change Detect Interrupt Flag

pub fn auxof(&self) -> AUXOF_R

Bit 3 - Auxiliary Overflow Interrupt Read Flag

pub fn tcc(&self) -> TCC_R

Bit 4 - Triggered Compare Interrupt Read Flag

pub fn oqsterr(&self) -> OQSTERR_R

Bit 5 - Oversampling Quadrature State Error Interrupt

impl R<u32, Reg<u32, _IEN>>

pub fn uf(&self) -> UF_R

Bit 0 - UF Interrupt Enable

pub fn of(&self) -> OF_R

Bit 1 - OF Interrupt Enable

pub fn dircng(&self) -> DIRCNG_R

Bit 2 - DIRCNG Interrupt Enable

pub fn auxof(&self) -> AUXOF_R

Bit 3 - AUXOF Interrupt Enable

pub fn tcc(&self) -> TCC_R

Bit 4 - TCC Interrupt Enable

pub fn oqsterr(&self) -> OQSTERR_R

Bit 5 - OQSTERR Interrupt Enable

impl R<u8, S0INLOC_A>

pub fn variant(&self) -> Variant<u8, S0INLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, S1INLOC_A>

pub fn variant(&self) -> Variant<u8, S1INLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn s0inloc(&self) -> S0INLOC_R

Bits 0:5 - I/O Location

pub fn s1inloc(&self) -> S1INLOC_R

Bits 8:13 - I/O Location

impl R<u32, Reg<u32, _FREEZE>>

pub fn regfreeze(&self) -> REGFREEZE_R

Bit 0 - Register Update Freeze

impl R<u32, Reg<u32, _SYNCBUSY>>

pub fn ctrl(&self) -> CTRL_R

Bit 0 - CTRL Register Busy

pub fn cmd(&self) -> CMD_R

Bit 1 - CMD Register Busy

pub fn topb(&self) -> TOPB_R

Bit 2 - TOPB Register Busy

pub fn ovscfg(&self) -> OVSCFG_R

Bit 3 - OVSCFG Register Busy

impl R<u32, Reg<u32, _AUXCNT>>

pub fn auxcnt(&self) -> AUXCNT_R

Bits 0:15 - Auxiliary Counter Value

impl R<u8, S0PRSSEL_A>

pub fn variant(&self) -> Variant<u8, S0PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, S1PRSSEL_A>

pub fn variant(&self) -> Variant<u8, S1PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _INPUT>>

pub fn s0prssel(&self) -> S0PRSSEL_R

Bits 0:4 - S0IN PRS Channel Select

pub fn s0prsen(&self) -> S0PRSEN_R

Bit 5 - S0IN PRS Enable

pub fn s1prssel(&self) -> S1PRSSEL_R

Bits 6:10 - S1IN PRS Channel Select

pub fn s1prsen(&self) -> S1PRSEN_R

Bit 11 - S1IN PRS Enable

impl R<u32, Reg<u32, _OVSCFG>>

pub fn filtlen(&self) -> FILTLEN_R

Bits 0:7 - Configure Filter Length for Inputs S0IN and S1IN

pub fn flutterrm(&self) -> FLUTTERRM_R

Bit 12 - Flutter Remove

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_ovssingle(&self) -> bool

Checks if the value of the field is OVSSINGLE

pub fn is_extclksingle(&self) -> bool

Checks if the value of the field is EXTCLKSINGLE

pub fn is_extclkquad(&self) -> bool

Checks if the value of the field is EXTCLKQUAD

pub fn is_ovsquad1x(&self) -> bool

Checks if the value of the field is OVSQUAD1X

pub fn is_ovsquad2x(&self) -> bool

Checks if the value of the field is OVSQUAD2X

pub fn is_ovsquad4x(&self) -> bool

Checks if the value of the field is OVSQUAD4X

impl R<u8, CNTEV_A>

pub fn variant(&self) -> CNTEV_A

Get enumerated values variant

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, AUXCNTEV_A>

pub fn variant(&self) -> AUXCNTEV_A

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_up(&self) -> bool

Checks if the value of the field is UP

pub fn is_down(&self) -> bool

Checks if the value of the field is DOWN

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

impl R<u8, TCCMODE_A>

pub fn variant(&self) -> Variant<u8, TCCMODE_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_lfa(&self) -> bool

Checks if the value of the field is LFA

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

impl R<u8, TCCPRESC_A>

pub fn variant(&self) -> TCCPRESC_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

impl R<u8, TCCCOMP_A>

pub fn variant(&self) -> Variant<u8, TCCCOMP_A>

Get enumerated values variant

pub fn is_ltoe(&self) -> bool

Checks if the value of the field is LTOE

pub fn is_gtoe(&self) -> bool

Checks if the value of the field is GTOE

pub fn is_range(&self) -> bool

Checks if the value of the field is RANGE

impl R<u8, TCCPRSSEL_A>

pub fn variant(&self) -> Variant<u8, TCCPRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:2 - Mode Select

pub fn filt(&self) -> FILT_R

Bit 3 - Enable Digital Pulse Width Filter

pub fn rsten(&self) -> RSTEN_R

Bit 4 - Enable PCNT Clock Domain Reset

pub fn cntrsten(&self) -> CNTRSTEN_R

Bit 5 - Enable CNT Reset

pub fn auxcntrsten(&self) -> AUXCNTRSTEN_R

Bit 6 - Enable AUXCNT Reset

pub fn debughalt(&self) -> DEBUGHALT_R

Bit 7 - Debug Mode Halt Enable

pub fn hyst(&self) -> HYST_R

Bit 8 - Enable Hysteresis

pub fn s1cdir(&self) -> S1CDIR_R

Bit 9 - Count Direction Determined By S1

pub fn cntev(&self) -> CNTEV_R

Bits 10:11 - Controls When the Counter Counts

pub fn auxcntev(&self) -> AUXCNTEV_R

Bits 12:13 - Controls When the Auxiliary Counter Counts

pub fn cntdir(&self) -> CNTDIR_R

Bit 14 - Non-Quadrature Mode Counter Direction Control

pub fn edge(&self) -> EDGE_R

Bit 15 - Edge Select

pub fn tccmode(&self) -> TCCMODE_R

Bits 16:17 - Sets the Mode for Triggered Compare and Clear

pub fn tccpresc(&self) -> TCCPRESC_R

Bits 19:20 - Set the LFA Prescaler for Triggered Compare and Clear

pub fn tcccomp(&self) -> TCCCOMP_R

Bits 22:23 - Triggered Compare and Clear Compare Mode

pub fn prsgateen(&self) -> PRSGATEEN_R

Bit 24 - PRS Gate Enable

pub fn tccprspol(&self) -> TCCPRSPOL_R

Bit 25 - TCC PRS Polarity Select

pub fn tccprssel(&self) -> TCCPRSSEL_R

Bits 26:30 - TCC PRS Channel Select

pub fn topbhfsel(&self) -> TOPBHFSEL_R

Bit 31 - TOPB High Frequency Value Select

impl R<u32, Reg<u32, _STATUS>>

pub fn dir(&self) -> DIR_R

Bit 0 - Current Counter Direction

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:15 - Counter Value

impl R<u32, Reg<u32, _TOP>>

pub fn top(&self) -> TOP_R

Bits 0:15 - Counter Top Value

impl R<u32, Reg<u32, _TOPB>>

pub fn topb(&self) -> TOPB_R

Bits 0:15 - Counter Top Buffer

impl R<u32, Reg<u32, _IF>>

pub fn uf(&self) -> UF_R

Bit 0 - Underflow Interrupt Read Flag

pub fn of(&self) -> OF_R

Bit 1 - Overflow Interrupt Read Flag

pub fn dircng(&self) -> DIRCNG_R

Bit 2 - Direction Change Detect Interrupt Flag

pub fn auxof(&self) -> AUXOF_R

Bit 3 - Auxiliary Overflow Interrupt Read Flag

pub fn tcc(&self) -> TCC_R

Bit 4 - Triggered Compare Interrupt Read Flag

pub fn oqsterr(&self) -> OQSTERR_R

Bit 5 - Oversampling Quadrature State Error Interrupt

impl R<u32, Reg<u32, _IEN>>

pub fn uf(&self) -> UF_R

Bit 0 - UF Interrupt Enable

pub fn of(&self) -> OF_R

Bit 1 - OF Interrupt Enable

pub fn dircng(&self) -> DIRCNG_R

Bit 2 - DIRCNG Interrupt Enable

pub fn auxof(&self) -> AUXOF_R

Bit 3 - AUXOF Interrupt Enable

pub fn tcc(&self) -> TCC_R

Bit 4 - TCC Interrupt Enable

pub fn oqsterr(&self) -> OQSTERR_R

Bit 5 - OQSTERR Interrupt Enable

impl R<u8, S0INLOC_A>

pub fn variant(&self) -> Variant<u8, S0INLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, S1INLOC_A>

pub fn variant(&self) -> Variant<u8, S1INLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn s0inloc(&self) -> S0INLOC_R

Bits 0:5 - I/O Location

pub fn s1inloc(&self) -> S1INLOC_R

Bits 8:13 - I/O Location

impl R<u32, Reg<u32, _FREEZE>>

pub fn regfreeze(&self) -> REGFREEZE_R

Bit 0 - Register Update Freeze

impl R<u32, Reg<u32, _SYNCBUSY>>

pub fn ctrl(&self) -> CTRL_R

Bit 0 - CTRL Register Busy

pub fn cmd(&self) -> CMD_R

Bit 1 - CMD Register Busy

pub fn topb(&self) -> TOPB_R

Bit 2 - TOPB Register Busy

pub fn ovscfg(&self) -> OVSCFG_R

Bit 3 - OVSCFG Register Busy

impl R<u32, Reg<u32, _AUXCNT>>

pub fn auxcnt(&self) -> AUXCNT_R

Bits 0:15 - Auxiliary Counter Value

impl R<u8, S0PRSSEL_A>

pub fn variant(&self) -> Variant<u8, S0PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, S1PRSSEL_A>

pub fn variant(&self) -> Variant<u8, S1PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _INPUT>>

pub fn s0prssel(&self) -> S0PRSSEL_R

Bits 0:4 - S0IN PRS Channel Select

pub fn s0prsen(&self) -> S0PRSEN_R

Bit 5 - S0IN PRS Enable

pub fn s1prssel(&self) -> S1PRSSEL_R

Bits 6:10 - S1IN PRS Channel Select

pub fn s1prsen(&self) -> S1PRSEN_R

Bit 11 - S1IN PRS Enable

impl R<u32, Reg<u32, _OVSCFG>>

pub fn filtlen(&self) -> FILTLEN_R

Bits 0:7 - Configure Filter Length for Inputs S0IN and S1IN

pub fn flutterrm(&self) -> FLUTTERRM_R

Bit 12 - Flutter Remove

impl R<u8, CLHR_A>

pub fn variant(&self) -> Variant<u8, CLHR_A>

Get enumerated values variant

pub fn is_standard(&self) -> bool

Checks if the value of the field is STANDARD

pub fn is_asymmetric(&self) -> bool

Checks if the value of the field is ASYMMETRIC

pub fn is_fast(&self) -> bool

Checks if the value of the field is FAST

impl R<u8, BITO_A>

pub fn variant(&self) -> BITO_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_40pcc(&self) -> bool

Checks if the value of the field is _40PCC

pub fn is_80pcc(&self) -> bool

Checks if the value of the field is _80PCC

pub fn is_160pcc(&self) -> bool

Checks if the value of the field is _160PCC

impl R<u8, CLTO_A>

pub fn variant(&self) -> Variant<u8, CLTO_A>

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_40pcc(&self) -> bool

Checks if the value of the field is _40PCC

pub fn is_80pcc(&self) -> bool

Checks if the value of the field is _80PCC

pub fn is_160pcc(&self) -> bool

Checks if the value of the field is _160PCC

pub fn is_320pcc(&self) -> bool

Checks if the value of the field is _320PCC

pub fn is_1024pcc(&self) -> bool

Checks if the value of the field is _1024PCC

impl R<u32, Reg<u32, _CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - I2C Enable

pub fn slave(&self) -> SLAVE_R

Bit 1 - Addressable as Slave

pub fn autoack(&self) -> AUTOACK_R

Bit 2 - Automatic Acknowledge

pub fn autose(&self) -> AUTOSE_R

Bit 3 - Automatic STOP When Empty

pub fn autosn(&self) -> AUTOSN_R

Bit 4 - Automatic STOP on NACK

pub fn arbdis(&self) -> ARBDIS_R

Bit 5 - Arbitration Disable

pub fn gcamen(&self) -> GCAMEN_R

Bit 6 - General Call Address Match Enable

pub fn txbil(&self) -> TXBIL_R

Bit 7 - TX Buffer Interrupt Level

pub fn clhr(&self) -> CLHR_R

Bits 8:9 - Clock Low High Ratio

pub fn bito(&self) -> BITO_R

Bits 12:13 - Bus Idle Timeout

pub fn gibito(&self) -> GIBITO_R

Bit 15 - Go Idle on Bus Idle Timeout

pub fn clto(&self) -> CLTO_R

Bits 16:18 - Clock Low Timeout

impl R<u8, STATE_A>

pub fn variant(&self) -> Variant<u8, STATE_A>

Get enumerated values variant

pub fn is_idle(&self) -> bool

Checks if the value of the field is IDLE

pub fn is_wait(&self) -> bool

Checks if the value of the field is WAIT

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_addr(&self) -> bool

Checks if the value of the field is ADDR

pub fn is_addrack(&self) -> bool

Checks if the value of the field is ADDRACK

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_dataack(&self) -> bool

Checks if the value of the field is DATAACK

impl R<u32, Reg<u32, _STATE>>

pub fn busy(&self) -> BUSY_R

Bit 0 - Bus Busy

pub fn master(&self) -> MASTER_R

Bit 1 - Master

pub fn transmitter(&self) -> TRANSMITTER_R

Bit 2 - Transmitter

pub fn nacked(&self) -> NACKED_R

Bit 3 - Nack Received

pub fn bushold(&self) -> BUSHOLD_R

Bit 4 - Bus Held

pub fn state(&self) -> STATE_R

Bits 5:7 - Transmission State

impl R<u32, Reg<u32, _STATUS>>

pub fn pstart(&self) -> PSTART_R

Bit 0 - Pending START

pub fn pstop(&self) -> PSTOP_R

Bit 1 - Pending STOP

pub fn pack(&self) -> PACK_R

Bit 2 - Pending ACK

pub fn pnack(&self) -> PNACK_R

Bit 3 - Pending NACK

pub fn pcont(&self) -> PCONT_R

Bit 4 - Pending Continue

pub fn pabort(&self) -> PABORT_R

Bit 5 - Pending Abort

pub fn txc(&self) -> TXC_R

Bit 6 - TX Complete

pub fn txbl(&self) -> TXBL_R

Bit 7 - TX Buffer Level

pub fn rxdatav(&self) -> RXDATAV_R

Bit 8 - RX Data Valid

pub fn rxfull(&self) -> RXFULL_R

Bit 9 - RX FIFO Full

impl R<u32, Reg<u32, _CLKDIV>>

pub fn div(&self) -> DIV_R

Bits 0:8 - Clock Divider

impl R<u32, Reg<u32, _SADDR>>

pub fn addr(&self) -> ADDR_R

Bits 1:7 - Slave Address

impl R<u32, Reg<u32, _SADDRMASK>>

pub fn mask(&self) -> MASK_R

Bits 1:7 - Slave Address Mask

impl R<u32, Reg<u32, _RXDATA>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:7 - RX Data

impl R<u32, Reg<u32, _RXDOUBLE>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:7 - RX Data 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 8:15 - RX Data 1

impl R<u32, Reg<u32, _RXDATAP>>

pub fn rxdatap(&self) -> RXDATAP_R

Bits 0:7 - RX Data Peek

impl R<u32, Reg<u32, _RXDOUBLEP>>

pub fn rxdatap0(&self) -> RXDATAP0_R

Bits 0:7 - RX Data 0 Peek

pub fn rxdatap1(&self) -> RXDATAP1_R

Bits 8:15 - RX Data 1 Peek

impl R<u32, Reg<u32, _TXDATA>>

pub fn txdata(&self) -> TXDATA_R

Bits 0:7 - TX Data

impl R<u32, Reg<u32, _TXDOUBLE>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:7 - TX Data

pub fn txdata1(&self) -> TXDATA1_R

Bits 8:15 - TX Data

impl R<u32, Reg<u32, _IF>>

pub fn start(&self) -> START_R

Bit 0 - START Condition Interrupt Flag

pub fn rstart(&self) -> RSTART_R

Bit 1 - Repeated START Condition Interrupt Flag

pub fn addr(&self) -> ADDR_R

Bit 2 - Address Interrupt Flag

pub fn txc(&self) -> TXC_R

Bit 3 - Transfer Completed Interrupt Flag

pub fn txbl(&self) -> TXBL_R

Bit 4 - Transmit Buffer Level Interrupt Flag

pub fn rxdatav(&self) -> RXDATAV_R

Bit 5 - Receive Data Valid Interrupt Flag

pub fn ack(&self) -> ACK_R

Bit 6 - Acknowledge Received Interrupt Flag

pub fn nack(&self) -> NACK_R

Bit 7 - Not Acknowledge Received Interrupt Flag

pub fn mstop(&self) -> MSTOP_R

Bit 8 - Master STOP Condition Interrupt Flag

pub fn arblost(&self) -> ARBLOST_R

Bit 9 - Arbitration Lost Interrupt Flag

pub fn buserr(&self) -> BUSERR_R

Bit 10 - Bus Error Interrupt Flag

pub fn bushold(&self) -> BUSHOLD_R

Bit 11 - Bus Held Interrupt Flag

pub fn txof(&self) -> TXOF_R

Bit 12 - Transmit Buffer Overflow Interrupt Flag

pub fn rxuf(&self) -> RXUF_R

Bit 13 - Receive Buffer Underflow Interrupt Flag

pub fn bito(&self) -> BITO_R

Bit 14 - Bus Idle Timeout Interrupt Flag

pub fn clto(&self) -> CLTO_R

Bit 15 - Clock Low Timeout Interrupt Flag

pub fn sstop(&self) -> SSTOP_R

Bit 16 - Slave STOP Condition Interrupt Flag

pub fn rxfull(&self) -> RXFULL_R

Bit 17 - Receive Buffer Full Interrupt Flag

pub fn clerr(&self) -> CLERR_R

Bit 18 - Clock Low Error Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn start(&self) -> START_R

Bit 0 - START Interrupt Enable

pub fn rstart(&self) -> RSTART_R

Bit 1 - RSTART Interrupt Enable

pub fn addr(&self) -> ADDR_R

Bit 2 - ADDR Interrupt Enable

pub fn txc(&self) -> TXC_R

Bit 3 - TXC Interrupt Enable

pub fn txbl(&self) -> TXBL_R

Bit 4 - TXBL Interrupt Enable

pub fn rxdatav(&self) -> RXDATAV_R

Bit 5 - RXDATAV Interrupt Enable

pub fn ack(&self) -> ACK_R

Bit 6 - ACK Interrupt Enable

pub fn nack(&self) -> NACK_R

Bit 7 - NACK Interrupt Enable

pub fn mstop(&self) -> MSTOP_R

Bit 8 - MSTOP Interrupt Enable

pub fn arblost(&self) -> ARBLOST_R

Bit 9 - ARBLOST Interrupt Enable

pub fn buserr(&self) -> BUSERR_R

Bit 10 - BUSERR Interrupt Enable

pub fn bushold(&self) -> BUSHOLD_R

Bit 11 - BUSHOLD Interrupt Enable

pub fn txof(&self) -> TXOF_R

Bit 12 - TXOF Interrupt Enable

pub fn rxuf(&self) -> RXUF_R

Bit 13 - RXUF Interrupt Enable

pub fn bito(&self) -> BITO_R

Bit 14 - BITO Interrupt Enable

pub fn clto(&self) -> CLTO_R

Bit 15 - CLTO Interrupt Enable

pub fn sstop(&self) -> SSTOP_R

Bit 16 - SSTOP Interrupt Enable

pub fn rxfull(&self) -> RXFULL_R

Bit 17 - RXFULL Interrupt Enable

pub fn clerr(&self) -> CLERR_R

Bit 18 - CLERR Interrupt Enable

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn sdapen(&self) -> SDAPEN_R

Bit 0 - SDA Pin Enable

pub fn sclpen(&self) -> SCLPEN_R

Bit 1 - SCL Pin Enable

impl R<u8, SDALOC_A>

pub fn variant(&self) -> Variant<u8, SDALOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, SCLLOC_A>

pub fn variant(&self) -> Variant<u8, SCLLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn sdaloc(&self) -> SDALOC_R

Bits 0:5 - I/O Location

pub fn sclloc(&self) -> SCLLOC_R

Bits 8:13 - I/O Location

impl R<u8, CLHR_A>

pub fn variant(&self) -> Variant<u8, CLHR_A>

Get enumerated values variant

pub fn is_standard(&self) -> bool

Checks if the value of the field is STANDARD

pub fn is_asymmetric(&self) -> bool

Checks if the value of the field is ASYMMETRIC

pub fn is_fast(&self) -> bool

Checks if the value of the field is FAST

impl R<u8, BITO_A>

pub fn variant(&self) -> BITO_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_40pcc(&self) -> bool

Checks if the value of the field is _40PCC

pub fn is_80pcc(&self) -> bool

Checks if the value of the field is _80PCC

pub fn is_160pcc(&self) -> bool

Checks if the value of the field is _160PCC

impl R<u8, CLTO_A>

pub fn variant(&self) -> Variant<u8, CLTO_A>

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_40pcc(&self) -> bool

Checks if the value of the field is _40PCC

pub fn is_80pcc(&self) -> bool

Checks if the value of the field is _80PCC

pub fn is_160pcc(&self) -> bool

Checks if the value of the field is _160PCC

pub fn is_320pcc(&self) -> bool

Checks if the value of the field is _320PCC

pub fn is_1024pcc(&self) -> bool

Checks if the value of the field is _1024PCC

impl R<u32, Reg<u32, _CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - I2C Enable

pub fn slave(&self) -> SLAVE_R

Bit 1 - Addressable as Slave

pub fn autoack(&self) -> AUTOACK_R

Bit 2 - Automatic Acknowledge

pub fn autose(&self) -> AUTOSE_R

Bit 3 - Automatic STOP When Empty

pub fn autosn(&self) -> AUTOSN_R

Bit 4 - Automatic STOP on NACK

pub fn arbdis(&self) -> ARBDIS_R

Bit 5 - Arbitration Disable

pub fn gcamen(&self) -> GCAMEN_R

Bit 6 - General Call Address Match Enable

pub fn txbil(&self) -> TXBIL_R

Bit 7 - TX Buffer Interrupt Level

pub fn clhr(&self) -> CLHR_R

Bits 8:9 - Clock Low High Ratio

pub fn bito(&self) -> BITO_R

Bits 12:13 - Bus Idle Timeout

pub fn gibito(&self) -> GIBITO_R

Bit 15 - Go Idle on Bus Idle Timeout

pub fn clto(&self) -> CLTO_R

Bits 16:18 - Clock Low Timeout

impl R<u8, STATE_A>

pub fn variant(&self) -> Variant<u8, STATE_A>

Get enumerated values variant

pub fn is_idle(&self) -> bool

Checks if the value of the field is IDLE

pub fn is_wait(&self) -> bool

Checks if the value of the field is WAIT

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_addr(&self) -> bool

Checks if the value of the field is ADDR

pub fn is_addrack(&self) -> bool

Checks if the value of the field is ADDRACK

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_dataack(&self) -> bool

Checks if the value of the field is DATAACK

impl R<u32, Reg<u32, _STATE>>

pub fn busy(&self) -> BUSY_R

Bit 0 - Bus Busy

pub fn master(&self) -> MASTER_R

Bit 1 - Master

pub fn transmitter(&self) -> TRANSMITTER_R

Bit 2 - Transmitter

pub fn nacked(&self) -> NACKED_R

Bit 3 - Nack Received

pub fn bushold(&self) -> BUSHOLD_R

Bit 4 - Bus Held

pub fn state(&self) -> STATE_R

Bits 5:7 - Transmission State

impl R<u32, Reg<u32, _STATUS>>

pub fn pstart(&self) -> PSTART_R

Bit 0 - Pending START

pub fn pstop(&self) -> PSTOP_R

Bit 1 - Pending STOP

pub fn pack(&self) -> PACK_R

Bit 2 - Pending ACK

pub fn pnack(&self) -> PNACK_R

Bit 3 - Pending NACK

pub fn pcont(&self) -> PCONT_R

Bit 4 - Pending Continue

pub fn pabort(&self) -> PABORT_R

Bit 5 - Pending Abort

pub fn txc(&self) -> TXC_R

Bit 6 - TX Complete

pub fn txbl(&self) -> TXBL_R

Bit 7 - TX Buffer Level

pub fn rxdatav(&self) -> RXDATAV_R

Bit 8 - RX Data Valid

pub fn rxfull(&self) -> RXFULL_R

Bit 9 - RX FIFO Full

impl R<u32, Reg<u32, _CLKDIV>>

pub fn div(&self) -> DIV_R

Bits 0:8 - Clock Divider

impl R<u32, Reg<u32, _SADDR>>

pub fn addr(&self) -> ADDR_R

Bits 1:7 - Slave Address

impl R<u32, Reg<u32, _SADDRMASK>>

pub fn mask(&self) -> MASK_R

Bits 1:7 - Slave Address Mask

impl R<u32, Reg<u32, _RXDATA>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:7 - RX Data

impl R<u32, Reg<u32, _RXDOUBLE>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:7 - RX Data 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 8:15 - RX Data 1

impl R<u32, Reg<u32, _RXDATAP>>

pub fn rxdatap(&self) -> RXDATAP_R

Bits 0:7 - RX Data Peek

impl R<u32, Reg<u32, _RXDOUBLEP>>

pub fn rxdatap0(&self) -> RXDATAP0_R

Bits 0:7 - RX Data 0 Peek

pub fn rxdatap1(&self) -> RXDATAP1_R

Bits 8:15 - RX Data 1 Peek

impl R<u32, Reg<u32, _TXDATA>>

pub fn txdata(&self) -> TXDATA_R

Bits 0:7 - TX Data

impl R<u32, Reg<u32, _TXDOUBLE>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:7 - TX Data

pub fn txdata1(&self) -> TXDATA1_R

Bits 8:15 - TX Data

impl R<u32, Reg<u32, _IF>>

pub fn start(&self) -> START_R

Bit 0 - START Condition Interrupt Flag

pub fn rstart(&self) -> RSTART_R

Bit 1 - Repeated START Condition Interrupt Flag

pub fn addr(&self) -> ADDR_R

Bit 2 - Address Interrupt Flag

pub fn txc(&self) -> TXC_R

Bit 3 - Transfer Completed Interrupt Flag

pub fn txbl(&self) -> TXBL_R

Bit 4 - Transmit Buffer Level Interrupt Flag

pub fn rxdatav(&self) -> RXDATAV_R

Bit 5 - Receive Data Valid Interrupt Flag

pub fn ack(&self) -> ACK_R

Bit 6 - Acknowledge Received Interrupt Flag

pub fn nack(&self) -> NACK_R

Bit 7 - Not Acknowledge Received Interrupt Flag

pub fn mstop(&self) -> MSTOP_R

Bit 8 - Master STOP Condition Interrupt Flag

pub fn arblost(&self) -> ARBLOST_R

Bit 9 - Arbitration Lost Interrupt Flag

pub fn buserr(&self) -> BUSERR_R

Bit 10 - Bus Error Interrupt Flag

pub fn bushold(&self) -> BUSHOLD_R

Bit 11 - Bus Held Interrupt Flag

pub fn txof(&self) -> TXOF_R

Bit 12 - Transmit Buffer Overflow Interrupt Flag

pub fn rxuf(&self) -> RXUF_R

Bit 13 - Receive Buffer Underflow Interrupt Flag

pub fn bito(&self) -> BITO_R

Bit 14 - Bus Idle Timeout Interrupt Flag

pub fn clto(&self) -> CLTO_R

Bit 15 - Clock Low Timeout Interrupt Flag

pub fn sstop(&self) -> SSTOP_R

Bit 16 - Slave STOP Condition Interrupt Flag

pub fn rxfull(&self) -> RXFULL_R

Bit 17 - Receive Buffer Full Interrupt Flag

pub fn clerr(&self) -> CLERR_R

Bit 18 - Clock Low Error Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn start(&self) -> START_R

Bit 0 - START Interrupt Enable

pub fn rstart(&self) -> RSTART_R

Bit 1 - RSTART Interrupt Enable

pub fn addr(&self) -> ADDR_R

Bit 2 - ADDR Interrupt Enable

pub fn txc(&self) -> TXC_R

Bit 3 - TXC Interrupt Enable

pub fn txbl(&self) -> TXBL_R

Bit 4 - TXBL Interrupt Enable

pub fn rxdatav(&self) -> RXDATAV_R

Bit 5 - RXDATAV Interrupt Enable

pub fn ack(&self) -> ACK_R

Bit 6 - ACK Interrupt Enable

pub fn nack(&self) -> NACK_R

Bit 7 - NACK Interrupt Enable

pub fn mstop(&self) -> MSTOP_R

Bit 8 - MSTOP Interrupt Enable

pub fn arblost(&self) -> ARBLOST_R

Bit 9 - ARBLOST Interrupt Enable

pub fn buserr(&self) -> BUSERR_R

Bit 10 - BUSERR Interrupt Enable

pub fn bushold(&self) -> BUSHOLD_R

Bit 11 - BUSHOLD Interrupt Enable

pub fn txof(&self) -> TXOF_R

Bit 12 - TXOF Interrupt Enable

pub fn rxuf(&self) -> RXUF_R

Bit 13 - RXUF Interrupt Enable

pub fn bito(&self) -> BITO_R

Bit 14 - BITO Interrupt Enable

pub fn clto(&self) -> CLTO_R

Bit 15 - CLTO Interrupt Enable

pub fn sstop(&self) -> SSTOP_R

Bit 16 - SSTOP Interrupt Enable

pub fn rxfull(&self) -> RXFULL_R

Bit 17 - RXFULL Interrupt Enable

pub fn clerr(&self) -> CLERR_R

Bit 18 - CLERR Interrupt Enable

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn sdapen(&self) -> SDAPEN_R

Bit 0 - SDA Pin Enable

pub fn sclpen(&self) -> SCLPEN_R

Bit 1 - SCL Pin Enable

impl R<u8, SDALOC_A>

pub fn variant(&self) -> Variant<u8, SDALOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, SCLLOC_A>

pub fn variant(&self) -> Variant<u8, SCLLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn sdaloc(&self) -> SDALOC_R

Bits 0:5 - I/O Location

pub fn sclloc(&self) -> SCLLOC_R

Bits 8:13 - I/O Location

impl R<u8, CLHR_A>

pub fn variant(&self) -> Variant<u8, CLHR_A>

Get enumerated values variant

pub fn is_standard(&self) -> bool

Checks if the value of the field is STANDARD

pub fn is_asymmetric(&self) -> bool

Checks if the value of the field is ASYMMETRIC

pub fn is_fast(&self) -> bool

Checks if the value of the field is FAST

impl R<u8, BITO_A>

pub fn variant(&self) -> BITO_A

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_40pcc(&self) -> bool

Checks if the value of the field is _40PCC

pub fn is_80pcc(&self) -> bool

Checks if the value of the field is _80PCC

pub fn is_160pcc(&self) -> bool

Checks if the value of the field is _160PCC

impl R<u8, CLTO_A>

pub fn variant(&self) -> Variant<u8, CLTO_A>

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_40pcc(&self) -> bool

Checks if the value of the field is _40PCC

pub fn is_80pcc(&self) -> bool

Checks if the value of the field is _80PCC

pub fn is_160pcc(&self) -> bool

Checks if the value of the field is _160PCC

pub fn is_320pcc(&self) -> bool

Checks if the value of the field is _320PCC

pub fn is_1024pcc(&self) -> bool

Checks if the value of the field is _1024PCC

impl R<u32, Reg<u32, _CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - I2C Enable

pub fn slave(&self) -> SLAVE_R

Bit 1 - Addressable as Slave

pub fn autoack(&self) -> AUTOACK_R

Bit 2 - Automatic Acknowledge

pub fn autose(&self) -> AUTOSE_R

Bit 3 - Automatic STOP When Empty

pub fn autosn(&self) -> AUTOSN_R

Bit 4 - Automatic STOP on NACK

pub fn arbdis(&self) -> ARBDIS_R

Bit 5 - Arbitration Disable

pub fn gcamen(&self) -> GCAMEN_R

Bit 6 - General Call Address Match Enable

pub fn txbil(&self) -> TXBIL_R

Bit 7 - TX Buffer Interrupt Level

pub fn clhr(&self) -> CLHR_R

Bits 8:9 - Clock Low High Ratio

pub fn bito(&self) -> BITO_R

Bits 12:13 - Bus Idle Timeout

pub fn gibito(&self) -> GIBITO_R

Bit 15 - Go Idle on Bus Idle Timeout

pub fn clto(&self) -> CLTO_R

Bits 16:18 - Clock Low Timeout

impl R<u8, STATE_A>

pub fn variant(&self) -> Variant<u8, STATE_A>

Get enumerated values variant

pub fn is_idle(&self) -> bool

Checks if the value of the field is IDLE

pub fn is_wait(&self) -> bool

Checks if the value of the field is WAIT

pub fn is_start(&self) -> bool

Checks if the value of the field is START

pub fn is_addr(&self) -> bool

Checks if the value of the field is ADDR

pub fn is_addrack(&self) -> bool

Checks if the value of the field is ADDRACK

pub fn is_data(&self) -> bool

Checks if the value of the field is DATA

pub fn is_dataack(&self) -> bool

Checks if the value of the field is DATAACK

impl R<u32, Reg<u32, _STATE>>

pub fn busy(&self) -> BUSY_R

Bit 0 - Bus Busy

pub fn master(&self) -> MASTER_R

Bit 1 - Master

pub fn transmitter(&self) -> TRANSMITTER_R

Bit 2 - Transmitter

pub fn nacked(&self) -> NACKED_R

Bit 3 - Nack Received

pub fn bushold(&self) -> BUSHOLD_R

Bit 4 - Bus Held

pub fn state(&self) -> STATE_R

Bits 5:7 - Transmission State

impl R<u32, Reg<u32, _STATUS>>

pub fn pstart(&self) -> PSTART_R

Bit 0 - Pending START

pub fn pstop(&self) -> PSTOP_R

Bit 1 - Pending STOP

pub fn pack(&self) -> PACK_R

Bit 2 - Pending ACK

pub fn pnack(&self) -> PNACK_R

Bit 3 - Pending NACK

pub fn pcont(&self) -> PCONT_R

Bit 4 - Pending Continue

pub fn pabort(&self) -> PABORT_R

Bit 5 - Pending Abort

pub fn txc(&self) -> TXC_R

Bit 6 - TX Complete

pub fn txbl(&self) -> TXBL_R

Bit 7 - TX Buffer Level

pub fn rxdatav(&self) -> RXDATAV_R

Bit 8 - RX Data Valid

pub fn rxfull(&self) -> RXFULL_R

Bit 9 - RX FIFO Full

impl R<u32, Reg<u32, _CLKDIV>>

pub fn div(&self) -> DIV_R

Bits 0:8 - Clock Divider

impl R<u32, Reg<u32, _SADDR>>

pub fn addr(&self) -> ADDR_R

Bits 1:7 - Slave Address

impl R<u32, Reg<u32, _SADDRMASK>>

pub fn mask(&self) -> MASK_R

Bits 1:7 - Slave Address Mask

impl R<u32, Reg<u32, _RXDATA>>

pub fn rxdata(&self) -> RXDATA_R

Bits 0:7 - RX Data

impl R<u32, Reg<u32, _RXDOUBLE>>

pub fn rxdata0(&self) -> RXDATA0_R

Bits 0:7 - RX Data 0

pub fn rxdata1(&self) -> RXDATA1_R

Bits 8:15 - RX Data 1

impl R<u32, Reg<u32, _RXDATAP>>

pub fn rxdatap(&self) -> RXDATAP_R

Bits 0:7 - RX Data Peek

impl R<u32, Reg<u32, _RXDOUBLEP>>

pub fn rxdatap0(&self) -> RXDATAP0_R

Bits 0:7 - RX Data 0 Peek

pub fn rxdatap1(&self) -> RXDATAP1_R

Bits 8:15 - RX Data 1 Peek

impl R<u32, Reg<u32, _TXDATA>>

pub fn txdata(&self) -> TXDATA_R

Bits 0:7 - TX Data

impl R<u32, Reg<u32, _TXDOUBLE>>

pub fn txdata0(&self) -> TXDATA0_R

Bits 0:7 - TX Data

pub fn txdata1(&self) -> TXDATA1_R

Bits 8:15 - TX Data

impl R<u32, Reg<u32, _IF>>

pub fn start(&self) -> START_R

Bit 0 - START Condition Interrupt Flag

pub fn rstart(&self) -> RSTART_R

Bit 1 - Repeated START Condition Interrupt Flag

pub fn addr(&self) -> ADDR_R

Bit 2 - Address Interrupt Flag

pub fn txc(&self) -> TXC_R

Bit 3 - Transfer Completed Interrupt Flag

pub fn txbl(&self) -> TXBL_R

Bit 4 - Transmit Buffer Level Interrupt Flag

pub fn rxdatav(&self) -> RXDATAV_R

Bit 5 - Receive Data Valid Interrupt Flag

pub fn ack(&self) -> ACK_R

Bit 6 - Acknowledge Received Interrupt Flag

pub fn nack(&self) -> NACK_R

Bit 7 - Not Acknowledge Received Interrupt Flag

pub fn mstop(&self) -> MSTOP_R

Bit 8 - Master STOP Condition Interrupt Flag

pub fn arblost(&self) -> ARBLOST_R

Bit 9 - Arbitration Lost Interrupt Flag

pub fn buserr(&self) -> BUSERR_R

Bit 10 - Bus Error Interrupt Flag

pub fn bushold(&self) -> BUSHOLD_R

Bit 11 - Bus Held Interrupt Flag

pub fn txof(&self) -> TXOF_R

Bit 12 - Transmit Buffer Overflow Interrupt Flag

pub fn rxuf(&self) -> RXUF_R

Bit 13 - Receive Buffer Underflow Interrupt Flag

pub fn bito(&self) -> BITO_R

Bit 14 - Bus Idle Timeout Interrupt Flag

pub fn clto(&self) -> CLTO_R

Bit 15 - Clock Low Timeout Interrupt Flag

pub fn sstop(&self) -> SSTOP_R

Bit 16 - Slave STOP Condition Interrupt Flag

pub fn rxfull(&self) -> RXFULL_R

Bit 17 - Receive Buffer Full Interrupt Flag

pub fn clerr(&self) -> CLERR_R

Bit 18 - Clock Low Error Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn start(&self) -> START_R

Bit 0 - START Interrupt Enable

pub fn rstart(&self) -> RSTART_R

Bit 1 - RSTART Interrupt Enable

pub fn addr(&self) -> ADDR_R

Bit 2 - ADDR Interrupt Enable

pub fn txc(&self) -> TXC_R

Bit 3 - TXC Interrupt Enable

pub fn txbl(&self) -> TXBL_R

Bit 4 - TXBL Interrupt Enable

pub fn rxdatav(&self) -> RXDATAV_R

Bit 5 - RXDATAV Interrupt Enable

pub fn ack(&self) -> ACK_R

Bit 6 - ACK Interrupt Enable

pub fn nack(&self) -> NACK_R

Bit 7 - NACK Interrupt Enable

pub fn mstop(&self) -> MSTOP_R

Bit 8 - MSTOP Interrupt Enable

pub fn arblost(&self) -> ARBLOST_R

Bit 9 - ARBLOST Interrupt Enable

pub fn buserr(&self) -> BUSERR_R

Bit 10 - BUSERR Interrupt Enable

pub fn bushold(&self) -> BUSHOLD_R

Bit 11 - BUSHOLD Interrupt Enable

pub fn txof(&self) -> TXOF_R

Bit 12 - TXOF Interrupt Enable

pub fn rxuf(&self) -> RXUF_R

Bit 13 - RXUF Interrupt Enable

pub fn bito(&self) -> BITO_R

Bit 14 - BITO Interrupt Enable

pub fn clto(&self) -> CLTO_R

Bit 15 - CLTO Interrupt Enable

pub fn sstop(&self) -> SSTOP_R

Bit 16 - SSTOP Interrupt Enable

pub fn rxfull(&self) -> RXFULL_R

Bit 17 - RXFULL Interrupt Enable

pub fn clerr(&self) -> CLERR_R

Bit 18 - CLERR Interrupt Enable

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn sdapen(&self) -> SDAPEN_R

Bit 0 - SDA Pin Enable

pub fn sclpen(&self) -> SCLPEN_R

Bit 1 - SCL Pin Enable

impl R<u8, SDALOC_A>

pub fn variant(&self) -> Variant<u8, SDALOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u8, SCLLOC_A>

pub fn variant(&self) -> Variant<u8, SCLLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn sdaloc(&self) -> SDALOC_R

Bits 0:5 - I/O Location

pub fn sclloc(&self) -> SCLLOC_R

Bits 8:13 - I/O Location

impl R<u8, WARMUPMODE_A>

pub fn variant(&self) -> WARMUPMODE_A

Get enumerated values variant

pub fn is_normal(&self) -> bool

Checks if the value of the field is NORMAL

pub fn is_keepinstandby(&self) -> bool

Checks if the value of the field is KEEPINSTANDBY

pub fn is_keepinslowacc(&self) -> bool

Checks if the value of the field is KEEPINSLOWACC

pub fn is_keepadcwarm(&self) -> bool

Checks if the value of the field is KEEPADCWARM

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_nodivision(&self) -> bool

Checks if the value of the field is NODIVISION

impl R<u8, OVSRSEL_A>

pub fn variant(&self) -> Variant<u8, OVSRSEL_A>

Get enumerated values variant

pub fn is_x2(&self) -> bool

Checks if the value of the field is X2

pub fn is_x4(&self) -> bool

Checks if the value of the field is X4

pub fn is_x8(&self) -> bool

Checks if the value of the field is X8

pub fn is_x16(&self) -> bool

Checks if the value of the field is X16

pub fn is_x32(&self) -> bool

Checks if the value of the field is X32

pub fn is_x64(&self) -> bool

Checks if the value of the field is X64

pub fn is_x128(&self) -> bool

Checks if the value of the field is X128

pub fn is_x256(&self) -> bool

Checks if the value of the field is X256

pub fn is_x512(&self) -> bool

Checks if the value of the field is X512

pub fn is_x1024(&self) -> bool

Checks if the value of the field is X1024

pub fn is_x2048(&self) -> bool

Checks if the value of the field is X2048

pub fn is_x4096(&self) -> bool

Checks if the value of the field is X4096

impl R<u8, CHCONREFWARMIDLE_A>

pub fn variant(&self) -> Variant<u8, CHCONREFWARMIDLE_A>

Get enumerated values variant

pub fn is_prefscan(&self) -> bool

Checks if the value of the field is PREFSCAN

pub fn is_prefsingle(&self) -> bool

Checks if the value of the field is PREFSINGLE

pub fn is_keepprev(&self) -> bool

Checks if the value of the field is KEEPPREV

impl R<u32, Reg<u32, _CTRL>>

pub fn warmupmode(&self) -> WARMUPMODE_R

Bits 0:1 - Warm-up Mode

pub fn singledmawu(&self) -> SINGLEDMAWU_R

Bit 2 - SINGLEFIFO DMA Wakeup

pub fn scandmawu(&self) -> SCANDMAWU_R

Bit 3 - SCANFIFO DMA Wakeup

pub fn tailgate(&self) -> TAILGATE_R

Bit 4 - Conversion Tailgating

pub fn asyncclken(&self) -> ASYNCCLKEN_R

Bit 6 - Selects ASYNC CLK Enable Mode When ADCCLKMODE=1

pub fn adcclkmode(&self) -> ADCCLKMODE_R

Bit 7 - ADC Clock Mode

pub fn presc(&self) -> PRESC_R

Bits 8:14 - Prescalar Setting for ADC Sample and Conversion Clock

pub fn timebase(&self) -> TIMEBASE_R

Bits 16:22 - 1us Time Base

pub fn ovsrsel(&self) -> OVSRSEL_R

Bits 24:27 - Oversample Rate Select

pub fn dbghalt(&self) -> DBGHALT_R

Bit 28 - Debug Mode Halt Enable

pub fn chconmode(&self) -> CHCONMODE_R

Bit 29 - Channel Connect

pub fn chconrefwarmidle(&self) -> CHCONREFWARMIDLE_R

Bits 30:31 - Channel Connect and Reference Warm Sel When ADC is IDLE

impl R<u8, PROGERR_A>

pub fn variant(&self) -> Variant<u8, PROGERR_A>

Get enumerated values variant

pub fn is_busconf(&self) -> bool

Checks if the value of the field is BUSCONF

pub fn is_negselconf(&self) -> bool

Checks if the value of the field is NEGSELCONF

impl R<u32, Reg<u32, _STATUS>>

pub fn singleact(&self) -> SINGLEACT_R

Bit 0 - Single Channel Conversion Active

pub fn scanact(&self) -> SCANACT_R

Bit 1 - Scan Conversion Active

pub fn scanpending(&self) -> SCANPENDING_R

Bit 2 - Scan Conversion Pending

pub fn singlerefwarm(&self) -> SINGLEREFWARM_R

Bit 8 - Single Channel Reference Warmed Up

pub fn scanrefwarm(&self) -> SCANREFWARM_R

Bit 9 - Scan Reference Warmed Up

pub fn progerr(&self) -> PROGERR_R

Bits 10:11 - Programming Error Status

pub fn warm(&self) -> WARM_R

Bit 12 - ADC Warmed Up

pub fn singledv(&self) -> SINGLEDV_R

Bit 16 - Single Channel Data Valid

pub fn scandv(&self) -> SCANDV_R

Bit 17 - Scan Data Valid

impl R<u8, RES_A>

pub fn variant(&self) -> RES_A

Get enumerated values variant

pub fn is_12bit(&self) -> bool

Checks if the value of the field is _12BIT

pub fn is_8bit(&self) -> bool

Checks if the value of the field is _8BIT

pub fn is_6bit(&self) -> bool

Checks if the value of the field is _6BIT

pub fn is_ovs(&self) -> bool

Checks if the value of the field is OVS

impl R<u8, REF_A>

pub fn variant(&self) -> REF_A

Get enumerated values variant

pub fn is_1v25(&self) -> bool

Checks if the value of the field is _1V25

pub fn is_2v5(&self) -> bool

Checks if the value of the field is _2V5

pub fn is_vdd(&self) -> bool

Checks if the value of the field is VDD

pub fn is_5v(&self) -> bool

Checks if the value of the field is _5V

pub fn is_extsingle(&self) -> bool

Checks if the value of the field is EXTSINGLE

pub fn is_2xextdiff(&self) -> bool

Checks if the value of the field is _2XEXTDIFF

pub fn is_2xvdd(&self) -> bool

Checks if the value of the field is _2XVDD

pub fn is_conf(&self) -> bool

Checks if the value of the field is CONF

impl R<u8, AT_A>

pub fn variant(&self) -> Variant<u8, AT_A>

Get enumerated values variant

pub fn is_1cycle(&self) -> bool

Checks if the value of the field is _1CYCLE

pub fn is_2cycles(&self) -> bool

Checks if the value of the field is _2CYCLES

pub fn is_3cycles(&self) -> bool

Checks if the value of the field is _3CYCLES

pub fn is_4cycles(&self) -> bool

Checks if the value of the field is _4CYCLES

pub fn is_8cycles(&self) -> bool

Checks if the value of the field is _8CYCLES

pub fn is_16cycles(&self) -> bool

Checks if the value of the field is _16CYCLES

pub fn is_32cycles(&self) -> bool

Checks if the value of the field is _32CYCLES

pub fn is_64cycles(&self) -> bool

Checks if the value of the field is _64CYCLES

pub fn is_128cycles(&self) -> bool

Checks if the value of the field is _128CYCLES

pub fn is_256cycles(&self) -> bool

Checks if the value of the field is _256CYCLES

impl R<u32, Reg<u32, _SINGLECTRL>>

pub fn rep(&self) -> REP_R

Bit 0 - Single Channel Repetitive Mode

pub fn diff(&self) -> DIFF_R

Bit 1 - Single Channel Differential Mode

pub fn adj(&self) -> ADJ_R

Bit 2 - Single Channel Result Adjustment

pub fn res(&self) -> RES_R

Bits 3:4 - Single Channel Resolution Select

pub fn ref_(&self) -> REF_R

Bits 5:7 - Single Channel Reference Selection

pub fn possel(&self) -> POSSEL_R

Bits 8:15 - Single Channel Positive Input Selection

pub fn negsel(&self) -> NEGSEL_R

Bits 16:23 - Single Channel Negative Input Selection

pub fn at(&self) -> AT_R

Bits 24:27 - Single Channel Acquisition Time

pub fn prsen(&self) -> PRSEN_R

Bit 29 - Single Channel PRS Trigger Enable

pub fn cmpen(&self) -> CMPEN_R

Bit 31 - Compare Logic Enable for Single Channel

impl R<u8, VREFSEL_A>

pub fn variant(&self) -> VREFSEL_A

Get enumerated values variant

pub fn is_vbgr(&self) -> bool

Checks if the value of the field is VBGR

pub fn is_vddxwatt(&self) -> bool

Checks if the value of the field is VDDXWATT

pub fn is_vrefpwatt(&self) -> bool

Checks if the value of the field is VREFPWATT

pub fn is_vrefp(&self) -> bool

Checks if the value of the field is VREFP

pub fn is_ventropy(&self) -> bool

Checks if the value of the field is VENTROPY

pub fn is_vrefpnwatt(&self) -> bool

Checks if the value of the field is VREFPNWATT

pub fn is_vrefpn(&self) -> bool

Checks if the value of the field is VREFPN

pub fn is_vbgrlow(&self) -> bool

Checks if the value of the field is VBGRLOW

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, REPDELAY_A>

pub fn variant(&self) -> REPDELAY_A

Get enumerated values variant

pub fn is_nodelay(&self) -> bool

Checks if the value of the field is NODELAY

pub fn is_4cycles(&self) -> bool

Checks if the value of the field is _4CYCLES

pub fn is_8cycles(&self) -> bool

Checks if the value of the field is _8CYCLES

pub fn is_16cycles(&self) -> bool

Checks if the value of the field is _16CYCLES

pub fn is_32cycles(&self) -> bool

Checks if the value of the field is _32CYCLES

pub fn is_64cycles(&self) -> bool

Checks if the value of the field is _64CYCLES

pub fn is_128cycles(&self) -> bool

Checks if the value of the field is _128CYCLES

pub fn is_256cycles(&self) -> bool

Checks if the value of the field is _256CYCLES

impl R<u32, Reg<u32, _SINGLECTRLX>>

pub fn vrefsel(&self) -> VREFSEL_R

Bits 0:2 - Single Channel Reference Selection

pub fn vrefattfix(&self) -> VREFATTFIX_R

Bit 3 - Enable Fixed Scaling on VREF

pub fn vrefatt(&self) -> VREFATT_R

Bits 4:7 - Code for VREF Attenuation Factor When VREFSEL is 1, 2 or 5

pub fn vinatt(&self) -> VINATT_R

Bits 8:11 - Code for VIN Attenuation Factor

pub fn dvl(&self) -> DVL_R

Bits 12:13 - Single Channel DV Level Select

pub fn fifoofact(&self) -> FIFOOFACT_R

Bit 14 - Single Channel FIFO Overflow Action

pub fn prsmode(&self) -> PRSMODE_R

Bit 16 - Single Channel PRS Trigger Mode

pub fn prssel(&self) -> PRSSEL_R

Bits 17:21 - Single Channel PRS Trigger Select

pub fn convstartdelay(&self) -> CONVSTARTDELAY_R

Bits 22:26 - Delay Value for Next Conversion Start If CONVSTARTDELAYEN is Set

pub fn convstartdelayen(&self) -> CONVSTARTDELAYEN_R

Bit 27 - Enable Delaying Next Conversion Start

pub fn repdelay(&self) -> REPDELAY_R

Bits 29:31 - REPDELAY Select for SINGLE REP Mode

impl R<u8, RES_A>

pub fn variant(&self) -> RES_A

Get enumerated values variant

pub fn is_12bit(&self) -> bool

Checks if the value of the field is _12BIT

pub fn is_8bit(&self) -> bool

Checks if the value of the field is _8BIT

pub fn is_6bit(&self) -> bool

Checks if the value of the field is _6BIT

pub fn is_ovs(&self) -> bool

Checks if the value of the field is OVS

impl R<u8, REF_A>

pub fn variant(&self) -> REF_A

Get enumerated values variant

pub fn is_1v25(&self) -> bool

Checks if the value of the field is _1V25

pub fn is_2v5(&self) -> bool

Checks if the value of the field is _2V5

pub fn is_vdd(&self) -> bool

Checks if the value of the field is VDD

pub fn is_5v(&self) -> bool

Checks if the value of the field is _5V

pub fn is_extsingle(&self) -> bool

Checks if the value of the field is EXTSINGLE

pub fn is_2xextdiff(&self) -> bool

Checks if the value of the field is _2XEXTDIFF

pub fn is_2xvdd(&self) -> bool

Checks if the value of the field is _2XVDD

pub fn is_conf(&self) -> bool

Checks if the value of the field is CONF

impl R<u8, AT_A>

pub fn variant(&self) -> Variant<u8, AT_A>

Get enumerated values variant

pub fn is_1cycle(&self) -> bool

Checks if the value of the field is _1CYCLE

pub fn is_2cycles(&self) -> bool

Checks if the value of the field is _2CYCLES

pub fn is_3cycles(&self) -> bool

Checks if the value of the field is _3CYCLES

pub fn is_4cycles(&self) -> bool

Checks if the value of the field is _4CYCLES

pub fn is_8cycles(&self) -> bool

Checks if the value of the field is _8CYCLES

pub fn is_16cycles(&self) -> bool

Checks if the value of the field is _16CYCLES

pub fn is_32cycles(&self) -> bool

Checks if the value of the field is _32CYCLES

pub fn is_64cycles(&self) -> bool

Checks if the value of the field is _64CYCLES

pub fn is_128cycles(&self) -> bool

Checks if the value of the field is _128CYCLES

pub fn is_256cycles(&self) -> bool

Checks if the value of the field is _256CYCLES

impl R<u32, Reg<u32, _SCANCTRL>>

pub fn rep(&self) -> REP_R

Bit 0 - Scan Sequence Repetitive Mode

pub fn diff(&self) -> DIFF_R

Bit 1 - Scan Sequence Differential Mode

pub fn adj(&self) -> ADJ_R

Bit 2 - Scan Sequence Result Adjustment

pub fn res(&self) -> RES_R

Bits 3:4 - Scan Sequence Resolution Select

pub fn ref_(&self) -> REF_R

Bits 5:7 - Scan Sequence Reference Selection

pub fn at(&self) -> AT_R

Bits 24:27 - Scan Acquisition Time

pub fn prsen(&self) -> PRSEN_R

Bit 29 - Scan Sequence PRS Trigger Enable

pub fn cmpen(&self) -> CMPEN_R

Bit 31 - Compare Logic Enable for Scan

impl R<u8, VREFSEL_A>

pub fn variant(&self) -> Variant<u8, VREFSEL_A>

Get enumerated values variant

pub fn is_vbgr(&self) -> bool

Checks if the value of the field is VBGR

pub fn is_vddxwatt(&self) -> bool

Checks if the value of the field is VDDXWATT

pub fn is_vrefpwatt(&self) -> bool

Checks if the value of the field is VREFPWATT

pub fn is_vrefp(&self) -> bool

Checks if the value of the field is VREFP

pub fn is_vrefpnwatt(&self) -> bool

Checks if the value of the field is VREFPNWATT

pub fn is_vrefpn(&self) -> bool

Checks if the value of the field is VREFPN

pub fn is_vbgrlow(&self) -> bool

Checks if the value of the field is VBGRLOW

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, REPDELAY_A>

pub fn variant(&self) -> REPDELAY_A

Get enumerated values variant

pub fn is_nodelay(&self) -> bool

Checks if the value of the field is NODELAY

pub fn is_4cycles(&self) -> bool

Checks if the value of the field is _4CYCLES

pub fn is_8cycles(&self) -> bool

Checks if the value of the field is _8CYCLES

pub fn is_16cycles(&self) -> bool

Checks if the value of the field is _16CYCLES

pub fn is_32cycles(&self) -> bool

Checks if the value of the field is _32CYCLES

pub fn is_64cycles(&self) -> bool

Checks if the value of the field is _64CYCLES

pub fn is_128cycles(&self) -> bool

Checks if the value of the field is _128CYCLES

pub fn is_256cycles(&self) -> bool

Checks if the value of the field is _256CYCLES

impl R<u32, Reg<u32, _SCANCTRLX>>

pub fn vrefsel(&self) -> VREFSEL_R

Bits 0:2 - Scan Channel Reference Selection

pub fn vrefattfix(&self) -> VREFATTFIX_R

Bit 3 - Enable Fixed Scaling on VREF

pub fn vrefatt(&self) -> VREFATT_R

Bits 4:7 - Code for VREF Attenuation Factor When VREFSEL is 1, 2 or 5

pub fn vinatt(&self) -> VINATT_R

Bits 8:11 - Code for VIN Attenuation Factor

pub fn dvl(&self) -> DVL_R

Bits 12:13 - Scan DV Level Select

pub fn fifoofact(&self) -> FIFOOFACT_R

Bit 14 - Scan FIFO Overflow Action

pub fn prsmode(&self) -> PRSMODE_R

Bit 16 - Scan PRS Trigger Mode

pub fn prssel(&self) -> PRSSEL_R

Bits 17:21 - Scan Sequence PRS Trigger Select

pub fn convstartdelay(&self) -> CONVSTARTDELAY_R

Bits 22:26 - Delay Next Conversion Start If CONVSTARTDELAYEN is Set

pub fn convstartdelayen(&self) -> CONVSTARTDELAYEN_R

Bit 27 - Enable Delaying Next Conversion Start

pub fn repdelay(&self) -> REPDELAY_R

Bits 29:31 - REPDELAY Select for SCAN REP Mode

impl R<u32, Reg<u32, _SCANMASK>>

pub fn scaninputen(&self) -> SCANINPUTEN_R

Bits 0:31 - Scan Sequence Input Mask

impl R<u8, INPUT0TO7SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT0TO7SEL_A>

Get enumerated values variant

pub fn is_aport0ch0to7(&self) -> bool

Checks if the value of the field is APORT0CH0TO7

pub fn is_aport0ch8to15(&self) -> bool

Checks if the value of the field is APORT0CH8TO15

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport2ch0to7(&self) -> bool

Checks if the value of the field is APORT2CH0TO7

pub fn is_aport2ch8to15(&self) -> bool

Checks if the value of the field is APORT2CH8TO15

pub fn is_aport2ch16to23(&self) -> bool

Checks if the value of the field is APORT2CH16TO23

pub fn is_aport2ch24to31(&self) -> bool

Checks if the value of the field is APORT2CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

pub fn is_aport4ch0to7(&self) -> bool

Checks if the value of the field is APORT4CH0TO7

pub fn is_aport4ch8to15(&self) -> bool

Checks if the value of the field is APORT4CH8TO15

pub fn is_aport4ch16to23(&self) -> bool

Checks if the value of the field is APORT4CH16TO23

pub fn is_aport4ch24to31(&self) -> bool

Checks if the value of the field is APORT4CH24TO31

impl R<u8, INPUT8TO15SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT8TO15SEL_A>

Get enumerated values variant

pub fn is_aport0ch0to7(&self) -> bool

Checks if the value of the field is APORT0CH0TO7

pub fn is_aport0ch8to15(&self) -> bool

Checks if the value of the field is APORT0CH8TO15

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport2ch0to7(&self) -> bool

Checks if the value of the field is APORT2CH0TO7

pub fn is_aport2ch8to15(&self) -> bool

Checks if the value of the field is APORT2CH8TO15

pub fn is_aport2ch16to23(&self) -> bool

Checks if the value of the field is APORT2CH16TO23

pub fn is_aport2ch24to31(&self) -> bool

Checks if the value of the field is APORT2CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

pub fn is_aport4ch0to7(&self) -> bool

Checks if the value of the field is APORT4CH0TO7

pub fn is_aport4ch8to15(&self) -> bool

Checks if the value of the field is APORT4CH8TO15

pub fn is_aport4ch16to23(&self) -> bool

Checks if the value of the field is APORT4CH16TO23

pub fn is_aport4ch24to31(&self) -> bool

Checks if the value of the field is APORT4CH24TO31

impl R<u8, INPUT16TO23SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT16TO23SEL_A>

Get enumerated values variant

pub fn is_aport0ch0to7(&self) -> bool

Checks if the value of the field is APORT0CH0TO7

pub fn is_aport0ch8to15(&self) -> bool

Checks if the value of the field is APORT0CH8TO15

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport2ch0to7(&self) -> bool

Checks if the value of the field is APORT2CH0TO7

pub fn is_aport2ch8to15(&self) -> bool

Checks if the value of the field is APORT2CH8TO15

pub fn is_aport2ch16to23(&self) -> bool

Checks if the value of the field is APORT2CH16TO23

pub fn is_aport2ch24to31(&self) -> bool

Checks if the value of the field is APORT2CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

pub fn is_aport4ch0to7(&self) -> bool

Checks if the value of the field is APORT4CH0TO7

pub fn is_aport4ch8to15(&self) -> bool

Checks if the value of the field is APORT4CH8TO15

pub fn is_aport4ch16to23(&self) -> bool

Checks if the value of the field is APORT4CH16TO23

pub fn is_aport4ch24to31(&self) -> bool

Checks if the value of the field is APORT4CH24TO31

impl R<u8, INPUT24TO31SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT24TO31SEL_A>

Get enumerated values variant

pub fn is_aport0ch0to7(&self) -> bool

Checks if the value of the field is APORT0CH0TO7

pub fn is_aport0ch8to15(&self) -> bool

Checks if the value of the field is APORT0CH8TO15

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport2ch0to7(&self) -> bool

Checks if the value of the field is APORT2CH0TO7

pub fn is_aport2ch8to15(&self) -> bool

Checks if the value of the field is APORT2CH8TO15

pub fn is_aport2ch16to23(&self) -> bool

Checks if the value of the field is APORT2CH16TO23

pub fn is_aport2ch24to31(&self) -> bool

Checks if the value of the field is APORT2CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

pub fn is_aport4ch0to7(&self) -> bool

Checks if the value of the field is APORT4CH0TO7

pub fn is_aport4ch8to15(&self) -> bool

Checks if the value of the field is APORT4CH8TO15

pub fn is_aport4ch16to23(&self) -> bool

Checks if the value of the field is APORT4CH16TO23

pub fn is_aport4ch24to31(&self) -> bool

Checks if the value of the field is APORT4CH24TO31

impl R<u32, Reg<u32, _SCANINPUTSEL>>

pub fn input0to7sel(&self) -> INPUT0TO7SEL_R

Bits 0:4 - Inputs Chosen for ADCn_INPUT7-ADCn_INPUT0 as Referred in SCANMASK

pub fn input8to15sel(&self) -> INPUT8TO15SEL_R

Bits 8:12 - Inputs Chosen for ADCn_INPUT8-ADCn_INPUT15 as Referred in SCANMASK

pub fn input16to23sel(&self) -> INPUT16TO23SEL_R

Bits 16:20 - Inputs Chosen for ADCn_INPUT16-ADCn_INPUT23 as Referred in SCANMASK

pub fn input24to31sel(&self) -> INPUT24TO31SEL_R

Bits 24:28 - Inputs Chosen for ADCn_INPUT24-ADCn_INPUT31 as Referred in SCANMASK

impl R<u8, INPUT0NEGSEL_A>

pub fn variant(&self) -> INPUT0NEGSEL_A

Get enumerated values variant

pub fn is_input1(&self) -> bool

Checks if the value of the field is INPUT1

pub fn is_input3(&self) -> bool

Checks if the value of the field is INPUT3

pub fn is_input5(&self) -> bool

Checks if the value of the field is INPUT5

pub fn is_input7(&self) -> bool

Checks if the value of the field is INPUT7

impl R<u8, INPUT2NEGSEL_A>

pub fn variant(&self) -> INPUT2NEGSEL_A

Get enumerated values variant

pub fn is_input1(&self) -> bool

Checks if the value of the field is INPUT1

pub fn is_input3(&self) -> bool

Checks if the value of the field is INPUT3

pub fn is_input5(&self) -> bool

Checks if the value of the field is INPUT5

pub fn is_input7(&self) -> bool

Checks if the value of the field is INPUT7

impl R<u8, INPUT4NEGSEL_A>

pub fn variant(&self) -> INPUT4NEGSEL_A

Get enumerated values variant

pub fn is_input1(&self) -> bool

Checks if the value of the field is INPUT1

pub fn is_input3(&self) -> bool

Checks if the value of the field is INPUT3

pub fn is_input5(&self) -> bool

Checks if the value of the field is INPUT5

pub fn is_input7(&self) -> bool

Checks if the value of the field is INPUT7

impl R<u8, INPUT6NEGSEL_A>

pub fn variant(&self) -> INPUT6NEGSEL_A

Get enumerated values variant

pub fn is_input1(&self) -> bool

Checks if the value of the field is INPUT1

pub fn is_input3(&self) -> bool

Checks if the value of the field is INPUT3

pub fn is_input5(&self) -> bool

Checks if the value of the field is INPUT5

pub fn is_input7(&self) -> bool

Checks if the value of the field is INPUT7

impl R<u8, INPUT9NEGSEL_A>

pub fn variant(&self) -> INPUT9NEGSEL_A

Get enumerated values variant

pub fn is_input8(&self) -> bool

Checks if the value of the field is INPUT8

pub fn is_input10(&self) -> bool

Checks if the value of the field is INPUT10

pub fn is_input12(&self) -> bool

Checks if the value of the field is INPUT12

pub fn is_input14(&self) -> bool

Checks if the value of the field is INPUT14

impl R<u8, INPUT11NEGSEL_A>

pub fn variant(&self) -> INPUT11NEGSEL_A

Get enumerated values variant

pub fn is_input8(&self) -> bool

Checks if the value of the field is INPUT8

pub fn is_input10(&self) -> bool

Checks if the value of the field is INPUT10

pub fn is_input12(&self) -> bool

Checks if the value of the field is INPUT12

pub fn is_input14(&self) -> bool

Checks if the value of the field is INPUT14

impl R<u8, INPUT13NEGSEL_A>

pub fn variant(&self) -> INPUT13NEGSEL_A

Get enumerated values variant

pub fn is_input8(&self) -> bool

Checks if the value of the field is INPUT8

pub fn is_input10(&self) -> bool

Checks if the value of the field is INPUT10

pub fn is_input12(&self) -> bool

Checks if the value of the field is INPUT12

pub fn is_input14(&self) -> bool

Checks if the value of the field is INPUT14

impl R<u8, INPUT15NEGSEL_A>

pub fn variant(&self) -> INPUT15NEGSEL_A

Get enumerated values variant

pub fn is_input8(&self) -> bool

Checks if the value of the field is INPUT8

pub fn is_input10(&self) -> bool

Checks if the value of the field is INPUT10

pub fn is_input12(&self) -> bool

Checks if the value of the field is INPUT12

pub fn is_input14(&self) -> bool

Checks if the value of the field is INPUT14

impl R<u32, Reg<u32, _SCANNEGSEL>>

pub fn input0negsel(&self) -> INPUT0NEGSEL_R

Bits 0:1 - Negative Input Select Register for ADCn_INPUT0 in Differential Scan Mode

pub fn input2negsel(&self) -> INPUT2NEGSEL_R

Bits 2:3 - Negative Input Select Register for ADCn_INPUT2 in Differential Scan Mode

pub fn input4negsel(&self) -> INPUT4NEGSEL_R

Bits 4:5 - Negative Input Select Register for ADCn_INPUT4 in Differential Scan Mode

pub fn input6negsel(&self) -> INPUT6NEGSEL_R

Bits 6:7 - Negative Input Select Register for ADCn_INPUT1 in Differential Scan Mode

pub fn input9negsel(&self) -> INPUT9NEGSEL_R

Bits 8:9 - Negative Input Select Register for ADCn_INPUT9 in Differential Scan Mode

pub fn input11negsel(&self) -> INPUT11NEGSEL_R

Bits 10:11 - Negative Input Select Register for ADCn_INPUT11 in Differential Scan Mode

pub fn input13negsel(&self) -> INPUT13NEGSEL_R

Bits 12:13 - Negative Input Select Register for ADCn_INPUT13 in Differential Scan Mode

pub fn input15negsel(&self) -> INPUT15NEGSEL_R

Bits 14:15 - Negative Input Select Register for ADCn_INPUT15 in Differential Scan Mode

impl R<u32, Reg<u32, _CMPTHR>>

pub fn adlt(&self) -> ADLT_R

Bits 0:15 - Less Than Compare Threshold

pub fn adgt(&self) -> ADGT_R

Bits 16:31 - Greater Than Compare Threshold

impl R<u8, ADCBIASPROG_A>

pub fn variant(&self) -> Variant<u8, ADCBIASPROG_A>

Get enumerated values variant

pub fn is_normal(&self) -> bool

Checks if the value of the field is NORMAL

pub fn is_scale2(&self) -> bool

Checks if the value of the field is SCALE2

pub fn is_scale4(&self) -> bool

Checks if the value of the field is SCALE4

pub fn is_scale8(&self) -> bool

Checks if the value of the field is SCALE8

pub fn is_scale16(&self) -> bool

Checks if the value of the field is SCALE16

pub fn is_scale32(&self) -> bool

Checks if the value of the field is SCALE32

impl R<u32, Reg<u32, _BIASPROG>>

pub fn adcbiasprog(&self) -> ADCBIASPROG_R

Bits 0:3 - Bias Programming Value of Analog ADC Block

pub fn vfaultclr(&self) -> VFAULTCLR_R

Bit 12 - Clear VREFOF Flag

pub fn gpbiasacc(&self) -> GPBIASACC_R

Bit 16 - Accuracy Setting for the System Bias During ADC Operation

impl R<u32, Reg<u32, _CAL>>

pub fn singleoffset(&self) -> SINGLEOFFSET_R

Bits 0:3 - Single Mode Offset Calibration Value for Differential or Positive Single-ended Mode

pub fn singleoffsetinv(&self) -> SINGLEOFFSETINV_R

Bits 4:7 - Single Mode Offset Calibration Value for Negative Single-ended Mode

pub fn singlegain(&self) -> SINGLEGAIN_R

Bits 8:14 - Single Mode Gain Calibration Value

pub fn offsetinvmode(&self) -> OFFSETINVMODE_R

Bit 15 - Negative Single-ended Offset Calibration is Enabled

pub fn scanoffset(&self) -> SCANOFFSET_R

Bits 16:19 - Scan Mode Offset Calibration Value for Differential or Positive Single-ended Mode

pub fn scanoffsetinv(&self) -> SCANOFFSETINV_R

Bits 20:23 - Scan Mode Offset Calibration Value for Negative Single-ended Mode

pub fn scangain(&self) -> SCANGAIN_R

Bits 24:30 - Scan Mode Gain Calibration Value

pub fn calen(&self) -> CALEN_R

Bit 31 - Calibration Mode is Enabled

impl R<u32, Reg<u32, _IF>>

pub fn single(&self) -> SINGLE_R

Bit 0 - Single Conversion Complete Interrupt Flag

pub fn scan(&self) -> SCAN_R

Bit 1 - Scan Conversion Complete Interrupt Flag

pub fn singleof(&self) -> SINGLEOF_R

Bit 8 - Single FIFO Overflow Interrupt Flag

pub fn scanof(&self) -> SCANOF_R

Bit 9 - Scan FIFO Overflow Interrupt Flag

pub fn singleuf(&self) -> SINGLEUF_R

Bit 10 - Single FIFO Underflow Interrupt Flag

pub fn scanuf(&self) -> SCANUF_R

Bit 11 - Scan FIFO Underflow Interrupt Flag

pub fn singlecmp(&self) -> SINGLECMP_R

Bit 16 - Single Result Compare Match Interrupt Flag

pub fn scancmp(&self) -> SCANCMP_R

Bit 17 - Scan Result Compare Match Interrupt Flag

pub fn vrefov(&self) -> VREFOV_R

Bit 24 - VREF Over Voltage Interrupt Flag

pub fn progerr(&self) -> PROGERR_R

Bit 25 - Programming Error Interrupt Flag

pub fn scanextpend(&self) -> SCANEXTPEND_R

Bit 26 - External Scan Trigger Pending Flag

pub fn scanpend(&self) -> SCANPEND_R

Bit 27 - Scan Trigger Pending Flag

pub fn prstimederr(&self) -> PRSTIMEDERR_R

Bit 28 - PRS Timed Mode Error Flag

pub fn em23err(&self) -> EM23ERR_R

Bit 29 - EM23 Entry Error Flag

impl R<u32, Reg<u32, _IEN>>

pub fn single(&self) -> SINGLE_R

Bit 0 - SINGLE Interrupt Enable

pub fn scan(&self) -> SCAN_R

Bit 1 - SCAN Interrupt Enable

pub fn singleof(&self) -> SINGLEOF_R

Bit 8 - SINGLEOF Interrupt Enable

pub fn scanof(&self) -> SCANOF_R

Bit 9 - SCANOF Interrupt Enable

pub fn singleuf(&self) -> SINGLEUF_R

Bit 10 - SINGLEUF Interrupt Enable

pub fn scanuf(&self) -> SCANUF_R

Bit 11 - SCANUF Interrupt Enable

pub fn singlecmp(&self) -> SINGLECMP_R

Bit 16 - SINGLECMP Interrupt Enable

pub fn scancmp(&self) -> SCANCMP_R

Bit 17 - SCANCMP Interrupt Enable

pub fn vrefov(&self) -> VREFOV_R

Bit 24 - VREFOV Interrupt Enable

pub fn progerr(&self) -> PROGERR_R

Bit 25 - PROGERR Interrupt Enable

pub fn scanextpend(&self) -> SCANEXTPEND_R

Bit 26 - SCANEXTPEND Interrupt Enable

pub fn scanpend(&self) -> SCANPEND_R

Bit 27 - SCANPEND Interrupt Enable

pub fn prstimederr(&self) -> PRSTIMEDERR_R

Bit 28 - PRSTIMEDERR Interrupt Enable

pub fn em23err(&self) -> EM23ERR_R

Bit 29 - EM23ERR Interrupt Enable

impl R<u32, Reg<u32, _SINGLEDATA>>

pub fn data(&self) -> DATA_R

Bits 0:31 - Single Conversion Result Data

impl R<u32, Reg<u32, _SCANDATA>>

pub fn data(&self) -> DATA_R

Bits 0:31 - Scan Conversion Result Data

impl R<u32, Reg<u32, _SINGLEDATAP>>

pub fn datap(&self) -> DATAP_R

Bits 0:31 - Single Conversion Result Data Peek

impl R<u32, Reg<u32, _SCANDATAP>>

pub fn datap(&self) -> DATAP_R

Bits 0:31 - Scan Conversion Result Data Peek

impl R<u32, Reg<u32, _SCANDATAX>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Conversion Result Data

pub fn scaninputid(&self) -> SCANINPUTID_R

Bits 16:20 - Scan Conversion Input ID

impl R<u32, Reg<u32, _SCANDATAXP>>

pub fn datap(&self) -> DATAP_R

Bits 0:15 - Scan Conversion Result Data Peek

pub fn scaninputidpeek(&self) -> SCANINPUTIDPEEK_R

Bits 16:20 - Scan Conversion Data Source Peek

impl R<u32, Reg<u32, _APORTREQ>>

pub fn aport0xreq(&self) -> APORT0XREQ_R

Bit 0 - 1 If the Bus Connected to APORT0X is Requested

pub fn aport0yreq(&self) -> APORT0YREQ_R

Bit 1 - 1 If the Bus Connected to APORT0Y is Requested

pub fn aport1xreq(&self) -> APORT1XREQ_R

Bit 2 - 1 If the Bus Connected to APORT1X is Requested

pub fn aport1yreq(&self) -> APORT1YREQ_R

Bit 3 - 1 If the Bus Connected to APORT1Y is Requested

pub fn aport2xreq(&self) -> APORT2XREQ_R

Bit 4 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport2yreq(&self) -> APORT2YREQ_R

Bit 5 - 1 If the Bus Connected to APORT2Y is Requested

pub fn aport3xreq(&self) -> APORT3XREQ_R

Bit 6 - 1 If the Bus Connected to APORT3X is Requested

pub fn aport3yreq(&self) -> APORT3YREQ_R

Bit 7 - 1 If the Bus Connected to APORT3Y is Requested

pub fn aport4xreq(&self) -> APORT4XREQ_R

Bit 8 - 1 If the Bus Connected to APORT4X is Requested

pub fn aport4yreq(&self) -> APORT4YREQ_R

Bit 9 - 1 If the Bus Connected to APORT4Y is Requested

impl R<u32, Reg<u32, _APORTCONFLICT>>

pub fn aport0xconflict(&self) -> APORT0XCONFLICT_R

Bit 0 - 1 If the Bus Connected to APORT0X is in Conflict With Another Peripheral

pub fn aport0yconflict(&self) -> APORT0YCONFLICT_R

Bit 1 - 1 If the Bus Connected to APORT0Y is in Conflict With Another Peripheral

pub fn aport1xconflict(&self) -> APORT1XCONFLICT_R

Bit 2 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport1yconflict(&self) -> APORT1YCONFLICT_R

Bit 3 - 1 If the Bus Connected to APORT1Y is in Conflict With Another Peripheral

pub fn aport2xconflict(&self) -> APORT2XCONFLICT_R

Bit 4 - 1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral

pub fn aport2yconflict(&self) -> APORT2YCONFLICT_R

Bit 5 - 1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral

pub fn aport3xconflict(&self) -> APORT3XCONFLICT_R

Bit 6 - 1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral

pub fn aport3yconflict(&self) -> APORT3YCONFLICT_R

Bit 7 - 1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral

pub fn aport4xconflict(&self) -> APORT4XCONFLICT_R

Bit 8 - 1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral

pub fn aport4yconflict(&self) -> APORT4YCONFLICT_R

Bit 9 - 1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral

impl R<u32, Reg<u32, _SINGLEFIFOCOUNT>>

pub fn singledc(&self) -> SINGLEDC_R

Bits 0:2 - Single Data Count

impl R<u32, Reg<u32, _SCANFIFOCOUNT>>

pub fn scandc(&self) -> SCANDC_R

Bits 0:2 - Scan Data Count

impl R<u32, Reg<u32, _APORTMASTERDIS>>

pub fn aport1xmasterdis(&self) -> APORT1XMASTERDIS_R

Bit 2 - APORT1X Master Disable

pub fn aport1ymasterdis(&self) -> APORT1YMASTERDIS_R

Bit 3 - APORT1Y Master Disable

pub fn aport2xmasterdis(&self) -> APORT2XMASTERDIS_R

Bit 4 - APORT2X Master Disable

pub fn aport2ymasterdis(&self) -> APORT2YMASTERDIS_R

Bit 5 - APORT2Y Master Disable

pub fn aport3xmasterdis(&self) -> APORT3XMASTERDIS_R

Bit 6 - APORT3X Master Disable

pub fn aport3ymasterdis(&self) -> APORT3YMASTERDIS_R

Bit 7 - APORT3Y Master Disable

pub fn aport4xmasterdis(&self) -> APORT4XMASTERDIS_R

Bit 8 - APORT4X Master Disable

pub fn aport4ymasterdis(&self) -> APORT4YMASTERDIS_R

Bit 9 - APORT4Y Master Disable

impl R<u8, WARMUPMODE_A>

pub fn variant(&self) -> WARMUPMODE_A

Get enumerated values variant

pub fn is_normal(&self) -> bool

Checks if the value of the field is NORMAL

pub fn is_keepinstandby(&self) -> bool

Checks if the value of the field is KEEPINSTANDBY

pub fn is_keepinslowacc(&self) -> bool

Checks if the value of the field is KEEPINSLOWACC

pub fn is_keepadcwarm(&self) -> bool

Checks if the value of the field is KEEPADCWARM

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_nodivision(&self) -> bool

Checks if the value of the field is NODIVISION

impl R<u8, OVSRSEL_A>

pub fn variant(&self) -> Variant<u8, OVSRSEL_A>

Get enumerated values variant

pub fn is_x2(&self) -> bool

Checks if the value of the field is X2

pub fn is_x4(&self) -> bool

Checks if the value of the field is X4

pub fn is_x8(&self) -> bool

Checks if the value of the field is X8

pub fn is_x16(&self) -> bool

Checks if the value of the field is X16

pub fn is_x32(&self) -> bool

Checks if the value of the field is X32

pub fn is_x64(&self) -> bool

Checks if the value of the field is X64

pub fn is_x128(&self) -> bool

Checks if the value of the field is X128

pub fn is_x256(&self) -> bool

Checks if the value of the field is X256

pub fn is_x512(&self) -> bool

Checks if the value of the field is X512

pub fn is_x1024(&self) -> bool

Checks if the value of the field is X1024

pub fn is_x2048(&self) -> bool

Checks if the value of the field is X2048

pub fn is_x4096(&self) -> bool

Checks if the value of the field is X4096

impl R<u8, CHCONREFWARMIDLE_A>

pub fn variant(&self) -> Variant<u8, CHCONREFWARMIDLE_A>

Get enumerated values variant

pub fn is_prefscan(&self) -> bool

Checks if the value of the field is PREFSCAN

pub fn is_prefsingle(&self) -> bool

Checks if the value of the field is PREFSINGLE

pub fn is_keepprev(&self) -> bool

Checks if the value of the field is KEEPPREV

impl R<u32, Reg<u32, _CTRL>>

pub fn warmupmode(&self) -> WARMUPMODE_R

Bits 0:1 - Warm-up Mode

pub fn singledmawu(&self) -> SINGLEDMAWU_R

Bit 2 - SINGLEFIFO DMA Wakeup

pub fn scandmawu(&self) -> SCANDMAWU_R

Bit 3 - SCANFIFO DMA Wakeup

pub fn tailgate(&self) -> TAILGATE_R

Bit 4 - Conversion Tailgating

pub fn asyncclken(&self) -> ASYNCCLKEN_R

Bit 6 - Selects ASYNC CLK Enable Mode When ADCCLKMODE=1

pub fn adcclkmode(&self) -> ADCCLKMODE_R

Bit 7 - ADC Clock Mode

pub fn presc(&self) -> PRESC_R

Bits 8:14 - Prescalar Setting for ADC Sample and Conversion Clock

pub fn timebase(&self) -> TIMEBASE_R

Bits 16:22 - 1us Time Base

pub fn ovsrsel(&self) -> OVSRSEL_R

Bits 24:27 - Oversample Rate Select

pub fn dbghalt(&self) -> DBGHALT_R

Bit 28 - Debug Mode Halt Enable

pub fn chconmode(&self) -> CHCONMODE_R

Bit 29 - Channel Connect

pub fn chconrefwarmidle(&self) -> CHCONREFWARMIDLE_R

Bits 30:31 - Channel Connect and Reference Warm Sel When ADC is IDLE

impl R<u8, PROGERR_A>

pub fn variant(&self) -> Variant<u8, PROGERR_A>

Get enumerated values variant

pub fn is_busconf(&self) -> bool

Checks if the value of the field is BUSCONF

pub fn is_negselconf(&self) -> bool

Checks if the value of the field is NEGSELCONF

impl R<u32, Reg<u32, _STATUS>>

pub fn singleact(&self) -> SINGLEACT_R

Bit 0 - Single Channel Conversion Active

pub fn scanact(&self) -> SCANACT_R

Bit 1 - Scan Conversion Active

pub fn scanpending(&self) -> SCANPENDING_R

Bit 2 - Scan Conversion Pending

pub fn singlerefwarm(&self) -> SINGLEREFWARM_R

Bit 8 - Single Channel Reference Warmed Up

pub fn scanrefwarm(&self) -> SCANREFWARM_R

Bit 9 - Scan Reference Warmed Up

pub fn progerr(&self) -> PROGERR_R

Bits 10:11 - Programming Error Status

pub fn warm(&self) -> WARM_R

Bit 12 - ADC Warmed Up

pub fn singledv(&self) -> SINGLEDV_R

Bit 16 - Single Channel Data Valid

pub fn scandv(&self) -> SCANDV_R

Bit 17 - Scan Data Valid

impl R<u8, RES_A>

pub fn variant(&self) -> RES_A

Get enumerated values variant

pub fn is_12bit(&self) -> bool

Checks if the value of the field is _12BIT

pub fn is_8bit(&self) -> bool

Checks if the value of the field is _8BIT

pub fn is_6bit(&self) -> bool

Checks if the value of the field is _6BIT

pub fn is_ovs(&self) -> bool

Checks if the value of the field is OVS

impl R<u8, REF_A>

pub fn variant(&self) -> REF_A

Get enumerated values variant

pub fn is_1v25(&self) -> bool

Checks if the value of the field is _1V25

pub fn is_2v5(&self) -> bool

Checks if the value of the field is _2V5

pub fn is_vdd(&self) -> bool

Checks if the value of the field is VDD

pub fn is_5v(&self) -> bool

Checks if the value of the field is _5V

pub fn is_extsingle(&self) -> bool

Checks if the value of the field is EXTSINGLE

pub fn is_2xextdiff(&self) -> bool

Checks if the value of the field is _2XEXTDIFF

pub fn is_2xvdd(&self) -> bool

Checks if the value of the field is _2XVDD

pub fn is_conf(&self) -> bool

Checks if the value of the field is CONF

impl R<u8, AT_A>

pub fn variant(&self) -> Variant<u8, AT_A>

Get enumerated values variant

pub fn is_1cycle(&self) -> bool

Checks if the value of the field is _1CYCLE

pub fn is_2cycles(&self) -> bool

Checks if the value of the field is _2CYCLES

pub fn is_3cycles(&self) -> bool

Checks if the value of the field is _3CYCLES

pub fn is_4cycles(&self) -> bool

Checks if the value of the field is _4CYCLES

pub fn is_8cycles(&self) -> bool

Checks if the value of the field is _8CYCLES

pub fn is_16cycles(&self) -> bool

Checks if the value of the field is _16CYCLES

pub fn is_32cycles(&self) -> bool

Checks if the value of the field is _32CYCLES

pub fn is_64cycles(&self) -> bool

Checks if the value of the field is _64CYCLES

pub fn is_128cycles(&self) -> bool

Checks if the value of the field is _128CYCLES

pub fn is_256cycles(&self) -> bool

Checks if the value of the field is _256CYCLES

impl R<u32, Reg<u32, _SINGLECTRL>>

pub fn rep(&self) -> REP_R

Bit 0 - Single Channel Repetitive Mode

pub fn diff(&self) -> DIFF_R

Bit 1 - Single Channel Differential Mode

pub fn adj(&self) -> ADJ_R

Bit 2 - Single Channel Result Adjustment

pub fn res(&self) -> RES_R

Bits 3:4 - Single Channel Resolution Select

pub fn ref_(&self) -> REF_R

Bits 5:7 - Single Channel Reference Selection

pub fn possel(&self) -> POSSEL_R

Bits 8:15 - Single Channel Positive Input Selection

pub fn negsel(&self) -> NEGSEL_R

Bits 16:23 - Single Channel Negative Input Selection

pub fn at(&self) -> AT_R

Bits 24:27 - Single Channel Acquisition Time

pub fn prsen(&self) -> PRSEN_R

Bit 29 - Single Channel PRS Trigger Enable

pub fn cmpen(&self) -> CMPEN_R

Bit 31 - Compare Logic Enable for Single Channel

impl R<u8, VREFSEL_A>

pub fn variant(&self) -> VREFSEL_A

Get enumerated values variant

pub fn is_vbgr(&self) -> bool

Checks if the value of the field is VBGR

pub fn is_vddxwatt(&self) -> bool

Checks if the value of the field is VDDXWATT

pub fn is_vrefpwatt(&self) -> bool

Checks if the value of the field is VREFPWATT

pub fn is_vrefp(&self) -> bool

Checks if the value of the field is VREFP

pub fn is_ventropy(&self) -> bool

Checks if the value of the field is VENTROPY

pub fn is_vrefpnwatt(&self) -> bool

Checks if the value of the field is VREFPNWATT

pub fn is_vrefpn(&self) -> bool

Checks if the value of the field is VREFPN

pub fn is_vbgrlow(&self) -> bool

Checks if the value of the field is VBGRLOW

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, REPDELAY_A>

pub fn variant(&self) -> REPDELAY_A

Get enumerated values variant

pub fn is_nodelay(&self) -> bool

Checks if the value of the field is NODELAY

pub fn is_4cycles(&self) -> bool

Checks if the value of the field is _4CYCLES

pub fn is_8cycles(&self) -> bool

Checks if the value of the field is _8CYCLES

pub fn is_16cycles(&self) -> bool

Checks if the value of the field is _16CYCLES

pub fn is_32cycles(&self) -> bool

Checks if the value of the field is _32CYCLES

pub fn is_64cycles(&self) -> bool

Checks if the value of the field is _64CYCLES

pub fn is_128cycles(&self) -> bool

Checks if the value of the field is _128CYCLES

pub fn is_256cycles(&self) -> bool

Checks if the value of the field is _256CYCLES

impl R<u32, Reg<u32, _SINGLECTRLX>>

pub fn vrefsel(&self) -> VREFSEL_R

Bits 0:2 - Single Channel Reference Selection

pub fn vrefattfix(&self) -> VREFATTFIX_R

Bit 3 - Enable Fixed Scaling on VREF

pub fn vrefatt(&self) -> VREFATT_R

Bits 4:7 - Code for VREF Attenuation Factor When VREFSEL is 1, 2 or 5

pub fn vinatt(&self) -> VINATT_R

Bits 8:11 - Code for VIN Attenuation Factor

pub fn dvl(&self) -> DVL_R

Bits 12:13 - Single Channel DV Level Select

pub fn fifoofact(&self) -> FIFOOFACT_R

Bit 14 - Single Channel FIFO Overflow Action

pub fn prsmode(&self) -> PRSMODE_R

Bit 16 - Single Channel PRS Trigger Mode

pub fn prssel(&self) -> PRSSEL_R

Bits 17:21 - Single Channel PRS Trigger Select

pub fn convstartdelay(&self) -> CONVSTARTDELAY_R

Bits 22:26 - Delay Value for Next Conversion Start If CONVSTARTDELAYEN is Set

pub fn convstartdelayen(&self) -> CONVSTARTDELAYEN_R

Bit 27 - Enable Delaying Next Conversion Start

pub fn repdelay(&self) -> REPDELAY_R

Bits 29:31 - REPDELAY Select for SINGLE REP Mode

impl R<u8, RES_A>

pub fn variant(&self) -> RES_A

Get enumerated values variant

pub fn is_12bit(&self) -> bool

Checks if the value of the field is _12BIT

pub fn is_8bit(&self) -> bool

Checks if the value of the field is _8BIT

pub fn is_6bit(&self) -> bool

Checks if the value of the field is _6BIT

pub fn is_ovs(&self) -> bool

Checks if the value of the field is OVS

impl R<u8, REF_A>

pub fn variant(&self) -> REF_A

Get enumerated values variant

pub fn is_1v25(&self) -> bool

Checks if the value of the field is _1V25

pub fn is_2v5(&self) -> bool

Checks if the value of the field is _2V5

pub fn is_vdd(&self) -> bool

Checks if the value of the field is VDD

pub fn is_5v(&self) -> bool

Checks if the value of the field is _5V

pub fn is_extsingle(&self) -> bool

Checks if the value of the field is EXTSINGLE

pub fn is_2xextdiff(&self) -> bool

Checks if the value of the field is _2XEXTDIFF

pub fn is_2xvdd(&self) -> bool

Checks if the value of the field is _2XVDD

pub fn is_conf(&self) -> bool

Checks if the value of the field is CONF

impl R<u8, AT_A>

pub fn variant(&self) -> Variant<u8, AT_A>

Get enumerated values variant

pub fn is_1cycle(&self) -> bool

Checks if the value of the field is _1CYCLE

pub fn is_2cycles(&self) -> bool

Checks if the value of the field is _2CYCLES

pub fn is_3cycles(&self) -> bool

Checks if the value of the field is _3CYCLES

pub fn is_4cycles(&self) -> bool

Checks if the value of the field is _4CYCLES

pub fn is_8cycles(&self) -> bool

Checks if the value of the field is _8CYCLES

pub fn is_16cycles(&self) -> bool

Checks if the value of the field is _16CYCLES

pub fn is_32cycles(&self) -> bool

Checks if the value of the field is _32CYCLES

pub fn is_64cycles(&self) -> bool

Checks if the value of the field is _64CYCLES

pub fn is_128cycles(&self) -> bool

Checks if the value of the field is _128CYCLES

pub fn is_256cycles(&self) -> bool

Checks if the value of the field is _256CYCLES

impl R<u32, Reg<u32, _SCANCTRL>>

pub fn rep(&self) -> REP_R

Bit 0 - Scan Sequence Repetitive Mode

pub fn diff(&self) -> DIFF_R

Bit 1 - Scan Sequence Differential Mode

pub fn adj(&self) -> ADJ_R

Bit 2 - Scan Sequence Result Adjustment

pub fn res(&self) -> RES_R

Bits 3:4 - Scan Sequence Resolution Select

pub fn ref_(&self) -> REF_R

Bits 5:7 - Scan Sequence Reference Selection

pub fn at(&self) -> AT_R

Bits 24:27 - Scan Acquisition Time

pub fn prsen(&self) -> PRSEN_R

Bit 29 - Scan Sequence PRS Trigger Enable

pub fn cmpen(&self) -> CMPEN_R

Bit 31 - Compare Logic Enable for Scan

impl R<u8, VREFSEL_A>

pub fn variant(&self) -> Variant<u8, VREFSEL_A>

Get enumerated values variant

pub fn is_vbgr(&self) -> bool

Checks if the value of the field is VBGR

pub fn is_vddxwatt(&self) -> bool

Checks if the value of the field is VDDXWATT

pub fn is_vrefpwatt(&self) -> bool

Checks if the value of the field is VREFPWATT

pub fn is_vrefp(&self) -> bool

Checks if the value of the field is VREFP

pub fn is_vrefpnwatt(&self) -> bool

Checks if the value of the field is VREFPNWATT

pub fn is_vrefpn(&self) -> bool

Checks if the value of the field is VREFPN

pub fn is_vbgrlow(&self) -> bool

Checks if the value of the field is VBGRLOW

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u8, REPDELAY_A>

pub fn variant(&self) -> REPDELAY_A

Get enumerated values variant

pub fn is_nodelay(&self) -> bool

Checks if the value of the field is NODELAY

pub fn is_4cycles(&self) -> bool

Checks if the value of the field is _4CYCLES

pub fn is_8cycles(&self) -> bool

Checks if the value of the field is _8CYCLES

pub fn is_16cycles(&self) -> bool

Checks if the value of the field is _16CYCLES

pub fn is_32cycles(&self) -> bool

Checks if the value of the field is _32CYCLES

pub fn is_64cycles(&self) -> bool

Checks if the value of the field is _64CYCLES

pub fn is_128cycles(&self) -> bool

Checks if the value of the field is _128CYCLES

pub fn is_256cycles(&self) -> bool

Checks if the value of the field is _256CYCLES

impl R<u32, Reg<u32, _SCANCTRLX>>

pub fn vrefsel(&self) -> VREFSEL_R

Bits 0:2 - Scan Channel Reference Selection

pub fn vrefattfix(&self) -> VREFATTFIX_R

Bit 3 - Enable Fixed Scaling on VREF

pub fn vrefatt(&self) -> VREFATT_R

Bits 4:7 - Code for VREF Attenuation Factor When VREFSEL is 1, 2 or 5

pub fn vinatt(&self) -> VINATT_R

Bits 8:11 - Code for VIN Attenuation Factor

pub fn dvl(&self) -> DVL_R

Bits 12:13 - Scan DV Level Select

pub fn fifoofact(&self) -> FIFOOFACT_R

Bit 14 - Scan FIFO Overflow Action

pub fn prsmode(&self) -> PRSMODE_R

Bit 16 - Scan PRS Trigger Mode

pub fn prssel(&self) -> PRSSEL_R

Bits 17:21 - Scan Sequence PRS Trigger Select

pub fn convstartdelay(&self) -> CONVSTARTDELAY_R

Bits 22:26 - Delay Next Conversion Start If CONVSTARTDELAYEN is Set

pub fn convstartdelayen(&self) -> CONVSTARTDELAYEN_R

Bit 27 - Enable Delaying Next Conversion Start

pub fn repdelay(&self) -> REPDELAY_R

Bits 29:31 - REPDELAY Select for SCAN REP Mode

impl R<u32, Reg<u32, _SCANMASK>>

pub fn scaninputen(&self) -> SCANINPUTEN_R

Bits 0:31 - Scan Sequence Input Mask

impl R<u8, INPUT0TO7SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT0TO7SEL_A>

Get enumerated values variant

pub fn is_aport0ch0to7(&self) -> bool

Checks if the value of the field is APORT0CH0TO7

pub fn is_aport0ch8to15(&self) -> bool

Checks if the value of the field is APORT0CH8TO15

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport2ch0to7(&self) -> bool

Checks if the value of the field is APORT2CH0TO7

pub fn is_aport2ch8to15(&self) -> bool

Checks if the value of the field is APORT2CH8TO15

pub fn is_aport2ch16to23(&self) -> bool

Checks if the value of the field is APORT2CH16TO23

pub fn is_aport2ch24to31(&self) -> bool

Checks if the value of the field is APORT2CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

pub fn is_aport4ch0to7(&self) -> bool

Checks if the value of the field is APORT4CH0TO7

pub fn is_aport4ch8to15(&self) -> bool

Checks if the value of the field is APORT4CH8TO15

pub fn is_aport4ch16to23(&self) -> bool

Checks if the value of the field is APORT4CH16TO23

pub fn is_aport4ch24to31(&self) -> bool

Checks if the value of the field is APORT4CH24TO31

impl R<u8, INPUT8TO15SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT8TO15SEL_A>

Get enumerated values variant

pub fn is_aport0ch0to7(&self) -> bool

Checks if the value of the field is APORT0CH0TO7

pub fn is_aport0ch8to15(&self) -> bool

Checks if the value of the field is APORT0CH8TO15

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport2ch0to7(&self) -> bool

Checks if the value of the field is APORT2CH0TO7

pub fn is_aport2ch8to15(&self) -> bool

Checks if the value of the field is APORT2CH8TO15

pub fn is_aport2ch16to23(&self) -> bool

Checks if the value of the field is APORT2CH16TO23

pub fn is_aport2ch24to31(&self) -> bool

Checks if the value of the field is APORT2CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

pub fn is_aport4ch0to7(&self) -> bool

Checks if the value of the field is APORT4CH0TO7

pub fn is_aport4ch8to15(&self) -> bool

Checks if the value of the field is APORT4CH8TO15

pub fn is_aport4ch16to23(&self) -> bool

Checks if the value of the field is APORT4CH16TO23

pub fn is_aport4ch24to31(&self) -> bool

Checks if the value of the field is APORT4CH24TO31

impl R<u8, INPUT16TO23SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT16TO23SEL_A>

Get enumerated values variant

pub fn is_aport0ch0to7(&self) -> bool

Checks if the value of the field is APORT0CH0TO7

pub fn is_aport0ch8to15(&self) -> bool

Checks if the value of the field is APORT0CH8TO15

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport2ch0to7(&self) -> bool

Checks if the value of the field is APORT2CH0TO7

pub fn is_aport2ch8to15(&self) -> bool

Checks if the value of the field is APORT2CH8TO15

pub fn is_aport2ch16to23(&self) -> bool

Checks if the value of the field is APORT2CH16TO23

pub fn is_aport2ch24to31(&self) -> bool

Checks if the value of the field is APORT2CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

pub fn is_aport4ch0to7(&self) -> bool

Checks if the value of the field is APORT4CH0TO7

pub fn is_aport4ch8to15(&self) -> bool

Checks if the value of the field is APORT4CH8TO15

pub fn is_aport4ch16to23(&self) -> bool

Checks if the value of the field is APORT4CH16TO23

pub fn is_aport4ch24to31(&self) -> bool

Checks if the value of the field is APORT4CH24TO31

impl R<u8, INPUT24TO31SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT24TO31SEL_A>

Get enumerated values variant

pub fn is_aport0ch0to7(&self) -> bool

Checks if the value of the field is APORT0CH0TO7

pub fn is_aport0ch8to15(&self) -> bool

Checks if the value of the field is APORT0CH8TO15

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport2ch0to7(&self) -> bool

Checks if the value of the field is APORT2CH0TO7

pub fn is_aport2ch8to15(&self) -> bool

Checks if the value of the field is APORT2CH8TO15

pub fn is_aport2ch16to23(&self) -> bool

Checks if the value of the field is APORT2CH16TO23

pub fn is_aport2ch24to31(&self) -> bool

Checks if the value of the field is APORT2CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

pub fn is_aport4ch0to7(&self) -> bool

Checks if the value of the field is APORT4CH0TO7

pub fn is_aport4ch8to15(&self) -> bool

Checks if the value of the field is APORT4CH8TO15

pub fn is_aport4ch16to23(&self) -> bool

Checks if the value of the field is APORT4CH16TO23

pub fn is_aport4ch24to31(&self) -> bool

Checks if the value of the field is APORT4CH24TO31

impl R<u32, Reg<u32, _SCANINPUTSEL>>

pub fn input0to7sel(&self) -> INPUT0TO7SEL_R

Bits 0:4 - Inputs Chosen for ADCn_INPUT7-ADCn_INPUT0 as Referred in SCANMASK

pub fn input8to15sel(&self) -> INPUT8TO15SEL_R

Bits 8:12 - Inputs Chosen for ADCn_INPUT8-ADCn_INPUT15 as Referred in SCANMASK

pub fn input16to23sel(&self) -> INPUT16TO23SEL_R

Bits 16:20 - Inputs Chosen for ADCn_INPUT16-ADCn_INPUT23 as Referred in SCANMASK

pub fn input24to31sel(&self) -> INPUT24TO31SEL_R

Bits 24:28 - Inputs Chosen for ADCn_INPUT24-ADCn_INPUT31 as Referred in SCANMASK

impl R<u8, INPUT0NEGSEL_A>

pub fn variant(&self) -> INPUT0NEGSEL_A

Get enumerated values variant

pub fn is_input1(&self) -> bool

Checks if the value of the field is INPUT1

pub fn is_input3(&self) -> bool

Checks if the value of the field is INPUT3

pub fn is_input5(&self) -> bool

Checks if the value of the field is INPUT5

pub fn is_input7(&self) -> bool

Checks if the value of the field is INPUT7

impl R<u8, INPUT2NEGSEL_A>

pub fn variant(&self) -> INPUT2NEGSEL_A

Get enumerated values variant

pub fn is_input1(&self) -> bool

Checks if the value of the field is INPUT1

pub fn is_input3(&self) -> bool

Checks if the value of the field is INPUT3

pub fn is_input5(&self) -> bool

Checks if the value of the field is INPUT5

pub fn is_input7(&self) -> bool

Checks if the value of the field is INPUT7

impl R<u8, INPUT4NEGSEL_A>

pub fn variant(&self) -> INPUT4NEGSEL_A

Get enumerated values variant

pub fn is_input1(&self) -> bool

Checks if the value of the field is INPUT1

pub fn is_input3(&self) -> bool

Checks if the value of the field is INPUT3

pub fn is_input5(&self) -> bool

Checks if the value of the field is INPUT5

pub fn is_input7(&self) -> bool

Checks if the value of the field is INPUT7

impl R<u8, INPUT6NEGSEL_A>

pub fn variant(&self) -> INPUT6NEGSEL_A

Get enumerated values variant

pub fn is_input1(&self) -> bool

Checks if the value of the field is INPUT1

pub fn is_input3(&self) -> bool

Checks if the value of the field is INPUT3

pub fn is_input5(&self) -> bool

Checks if the value of the field is INPUT5

pub fn is_input7(&self) -> bool

Checks if the value of the field is INPUT7

impl R<u8, INPUT9NEGSEL_A>

pub fn variant(&self) -> INPUT9NEGSEL_A

Get enumerated values variant

pub fn is_input8(&self) -> bool

Checks if the value of the field is INPUT8

pub fn is_input10(&self) -> bool

Checks if the value of the field is INPUT10

pub fn is_input12(&self) -> bool

Checks if the value of the field is INPUT12

pub fn is_input14(&self) -> bool

Checks if the value of the field is INPUT14

impl R<u8, INPUT11NEGSEL_A>

pub fn variant(&self) -> INPUT11NEGSEL_A

Get enumerated values variant

pub fn is_input8(&self) -> bool

Checks if the value of the field is INPUT8

pub fn is_input10(&self) -> bool

Checks if the value of the field is INPUT10

pub fn is_input12(&self) -> bool

Checks if the value of the field is INPUT12

pub fn is_input14(&self) -> bool

Checks if the value of the field is INPUT14

impl R<u8, INPUT13NEGSEL_A>

pub fn variant(&self) -> INPUT13NEGSEL_A

Get enumerated values variant

pub fn is_input8(&self) -> bool

Checks if the value of the field is INPUT8

pub fn is_input10(&self) -> bool

Checks if the value of the field is INPUT10

pub fn is_input12(&self) -> bool

Checks if the value of the field is INPUT12

pub fn is_input14(&self) -> bool

Checks if the value of the field is INPUT14

impl R<u8, INPUT15NEGSEL_A>

pub fn variant(&self) -> INPUT15NEGSEL_A

Get enumerated values variant

pub fn is_input8(&self) -> bool

Checks if the value of the field is INPUT8

pub fn is_input10(&self) -> bool

Checks if the value of the field is INPUT10

pub fn is_input12(&self) -> bool

Checks if the value of the field is INPUT12

pub fn is_input14(&self) -> bool

Checks if the value of the field is INPUT14

impl R<u32, Reg<u32, _SCANNEGSEL>>

pub fn input0negsel(&self) -> INPUT0NEGSEL_R

Bits 0:1 - Negative Input Select Register for ADCn_INPUT0 in Differential Scan Mode

pub fn input2negsel(&self) -> INPUT2NEGSEL_R

Bits 2:3 - Negative Input Select Register for ADCn_INPUT2 in Differential Scan Mode

pub fn input4negsel(&self) -> INPUT4NEGSEL_R

Bits 4:5 - Negative Input Select Register for ADCn_INPUT4 in Differential Scan Mode

pub fn input6negsel(&self) -> INPUT6NEGSEL_R

Bits 6:7 - Negative Input Select Register for ADCn_INPUT1 in Differential Scan Mode

pub fn input9negsel(&self) -> INPUT9NEGSEL_R

Bits 8:9 - Negative Input Select Register for ADCn_INPUT9 in Differential Scan Mode

pub fn input11negsel(&self) -> INPUT11NEGSEL_R

Bits 10:11 - Negative Input Select Register for ADCn_INPUT11 in Differential Scan Mode

pub fn input13negsel(&self) -> INPUT13NEGSEL_R

Bits 12:13 - Negative Input Select Register for ADCn_INPUT13 in Differential Scan Mode

pub fn input15negsel(&self) -> INPUT15NEGSEL_R

Bits 14:15 - Negative Input Select Register for ADCn_INPUT15 in Differential Scan Mode

impl R<u32, Reg<u32, _CMPTHR>>

pub fn adlt(&self) -> ADLT_R

Bits 0:15 - Less Than Compare Threshold

pub fn adgt(&self) -> ADGT_R

Bits 16:31 - Greater Than Compare Threshold

impl R<u8, ADCBIASPROG_A>

pub fn variant(&self) -> Variant<u8, ADCBIASPROG_A>

Get enumerated values variant

pub fn is_normal(&self) -> bool

Checks if the value of the field is NORMAL

pub fn is_scale2(&self) -> bool

Checks if the value of the field is SCALE2

pub fn is_scale4(&self) -> bool

Checks if the value of the field is SCALE4

pub fn is_scale8(&self) -> bool

Checks if the value of the field is SCALE8

pub fn is_scale16(&self) -> bool

Checks if the value of the field is SCALE16

pub fn is_scale32(&self) -> bool

Checks if the value of the field is SCALE32

impl R<u32, Reg<u32, _BIASPROG>>

pub fn adcbiasprog(&self) -> ADCBIASPROG_R

Bits 0:3 - Bias Programming Value of Analog ADC Block

pub fn vfaultclr(&self) -> VFAULTCLR_R

Bit 12 - Clear VREFOF Flag

pub fn gpbiasacc(&self) -> GPBIASACC_R

Bit 16 - Accuracy Setting for the System Bias During ADC Operation

impl R<u32, Reg<u32, _CAL>>

pub fn singleoffset(&self) -> SINGLEOFFSET_R

Bits 0:3 - Single Mode Offset Calibration Value for Differential or Positive Single-ended Mode

pub fn singleoffsetinv(&self) -> SINGLEOFFSETINV_R

Bits 4:7 - Single Mode Offset Calibration Value for Negative Single-ended Mode

pub fn singlegain(&self) -> SINGLEGAIN_R

Bits 8:14 - Single Mode Gain Calibration Value

pub fn offsetinvmode(&self) -> OFFSETINVMODE_R

Bit 15 - Negative Single-ended Offset Calibration is Enabled

pub fn scanoffset(&self) -> SCANOFFSET_R

Bits 16:19 - Scan Mode Offset Calibration Value for Differential or Positive Single-ended Mode

pub fn scanoffsetinv(&self) -> SCANOFFSETINV_R

Bits 20:23 - Scan Mode Offset Calibration Value for Negative Single-ended Mode

pub fn scangain(&self) -> SCANGAIN_R

Bits 24:30 - Scan Mode Gain Calibration Value

pub fn calen(&self) -> CALEN_R

Bit 31 - Calibration Mode is Enabled

impl R<u32, Reg<u32, _IF>>

pub fn single(&self) -> SINGLE_R

Bit 0 - Single Conversion Complete Interrupt Flag

pub fn scan(&self) -> SCAN_R

Bit 1 - Scan Conversion Complete Interrupt Flag

pub fn singleof(&self) -> SINGLEOF_R

Bit 8 - Single FIFO Overflow Interrupt Flag

pub fn scanof(&self) -> SCANOF_R

Bit 9 - Scan FIFO Overflow Interrupt Flag

pub fn singleuf(&self) -> SINGLEUF_R

Bit 10 - Single FIFO Underflow Interrupt Flag

pub fn scanuf(&self) -> SCANUF_R

Bit 11 - Scan FIFO Underflow Interrupt Flag

pub fn singlecmp(&self) -> SINGLECMP_R

Bit 16 - Single Result Compare Match Interrupt Flag

pub fn scancmp(&self) -> SCANCMP_R

Bit 17 - Scan Result Compare Match Interrupt Flag

pub fn vrefov(&self) -> VREFOV_R

Bit 24 - VREF Over Voltage Interrupt Flag

pub fn progerr(&self) -> PROGERR_R

Bit 25 - Programming Error Interrupt Flag

pub fn scanextpend(&self) -> SCANEXTPEND_R

Bit 26 - External Scan Trigger Pending Flag

pub fn scanpend(&self) -> SCANPEND_R

Bit 27 - Scan Trigger Pending Flag

pub fn prstimederr(&self) -> PRSTIMEDERR_R

Bit 28 - PRS Timed Mode Error Flag

pub fn em23err(&self) -> EM23ERR_R

Bit 29 - EM23 Entry Error Flag

impl R<u32, Reg<u32, _IEN>>

pub fn single(&self) -> SINGLE_R

Bit 0 - SINGLE Interrupt Enable

pub fn scan(&self) -> SCAN_R

Bit 1 - SCAN Interrupt Enable

pub fn singleof(&self) -> SINGLEOF_R

Bit 8 - SINGLEOF Interrupt Enable

pub fn scanof(&self) -> SCANOF_R

Bit 9 - SCANOF Interrupt Enable

pub fn singleuf(&self) -> SINGLEUF_R

Bit 10 - SINGLEUF Interrupt Enable

pub fn scanuf(&self) -> SCANUF_R

Bit 11 - SCANUF Interrupt Enable

pub fn singlecmp(&self) -> SINGLECMP_R

Bit 16 - SINGLECMP Interrupt Enable

pub fn scancmp(&self) -> SCANCMP_R

Bit 17 - SCANCMP Interrupt Enable

pub fn vrefov(&self) -> VREFOV_R

Bit 24 - VREFOV Interrupt Enable

pub fn progerr(&self) -> PROGERR_R

Bit 25 - PROGERR Interrupt Enable

pub fn scanextpend(&self) -> SCANEXTPEND_R

Bit 26 - SCANEXTPEND Interrupt Enable

pub fn scanpend(&self) -> SCANPEND_R

Bit 27 - SCANPEND Interrupt Enable

pub fn prstimederr(&self) -> PRSTIMEDERR_R

Bit 28 - PRSTIMEDERR Interrupt Enable

pub fn em23err(&self) -> EM23ERR_R

Bit 29 - EM23ERR Interrupt Enable

impl R<u32, Reg<u32, _SINGLEDATA>>

pub fn data(&self) -> DATA_R

Bits 0:31 - Single Conversion Result Data

impl R<u32, Reg<u32, _SCANDATA>>

pub fn data(&self) -> DATA_R

Bits 0:31 - Scan Conversion Result Data

impl R<u32, Reg<u32, _SINGLEDATAP>>

pub fn datap(&self) -> DATAP_R

Bits 0:31 - Single Conversion Result Data Peek

impl R<u32, Reg<u32, _SCANDATAP>>

pub fn datap(&self) -> DATAP_R

Bits 0:31 - Scan Conversion Result Data Peek

impl R<u32, Reg<u32, _SCANDATAX>>

pub fn data(&self) -> DATA_R

Bits 0:15 - Scan Conversion Result Data

pub fn scaninputid(&self) -> SCANINPUTID_R

Bits 16:20 - Scan Conversion Input ID

impl R<u32, Reg<u32, _SCANDATAXP>>

pub fn datap(&self) -> DATAP_R

Bits 0:15 - Scan Conversion Result Data Peek

pub fn scaninputidpeek(&self) -> SCANINPUTIDPEEK_R

Bits 16:20 - Scan Conversion Data Source Peek

impl R<u32, Reg<u32, _APORTREQ>>

pub fn aport0xreq(&self) -> APORT0XREQ_R

Bit 0 - 1 If the Bus Connected to APORT0X is Requested

pub fn aport0yreq(&self) -> APORT0YREQ_R

Bit 1 - 1 If the Bus Connected to APORT0Y is Requested

pub fn aport1xreq(&self) -> APORT1XREQ_R

Bit 2 - 1 If the Bus Connected to APORT1X is Requested

pub fn aport1yreq(&self) -> APORT1YREQ_R

Bit 3 - 1 If the Bus Connected to APORT1Y is Requested

pub fn aport2xreq(&self) -> APORT2XREQ_R

Bit 4 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport2yreq(&self) -> APORT2YREQ_R

Bit 5 - 1 If the Bus Connected to APORT2Y is Requested

pub fn aport3xreq(&self) -> APORT3XREQ_R

Bit 6 - 1 If the Bus Connected to APORT3X is Requested

pub fn aport3yreq(&self) -> APORT3YREQ_R

Bit 7 - 1 If the Bus Connected to APORT3Y is Requested

pub fn aport4xreq(&self) -> APORT4XREQ_R

Bit 8 - 1 If the Bus Connected to APORT4X is Requested

pub fn aport4yreq(&self) -> APORT4YREQ_R

Bit 9 - 1 If the Bus Connected to APORT4Y is Requested

impl R<u32, Reg<u32, _APORTCONFLICT>>

pub fn aport0xconflict(&self) -> APORT0XCONFLICT_R

Bit 0 - 1 If the Bus Connected to APORT0X is in Conflict With Another Peripheral

pub fn aport0yconflict(&self) -> APORT0YCONFLICT_R

Bit 1 - 1 If the Bus Connected to APORT0Y is in Conflict With Another Peripheral

pub fn aport1xconflict(&self) -> APORT1XCONFLICT_R

Bit 2 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport1yconflict(&self) -> APORT1YCONFLICT_R

Bit 3 - 1 If the Bus Connected to APORT1Y is in Conflict With Another Peripheral

pub fn aport2xconflict(&self) -> APORT2XCONFLICT_R

Bit 4 - 1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral

pub fn aport2yconflict(&self) -> APORT2YCONFLICT_R

Bit 5 - 1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral

pub fn aport3xconflict(&self) -> APORT3XCONFLICT_R

Bit 6 - 1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral

pub fn aport3yconflict(&self) -> APORT3YCONFLICT_R

Bit 7 - 1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral

pub fn aport4xconflict(&self) -> APORT4XCONFLICT_R

Bit 8 - 1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral

pub fn aport4yconflict(&self) -> APORT4YCONFLICT_R

Bit 9 - 1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral

impl R<u32, Reg<u32, _SINGLEFIFOCOUNT>>

pub fn singledc(&self) -> SINGLEDC_R

Bits 0:2 - Single Data Count

impl R<u32, Reg<u32, _SCANFIFOCOUNT>>

pub fn scandc(&self) -> SCANDC_R

Bits 0:2 - Scan Data Count

impl R<u32, Reg<u32, _APORTMASTERDIS>>

pub fn aport1xmasterdis(&self) -> APORT1XMASTERDIS_R

Bit 2 - APORT1X Master Disable

pub fn aport1ymasterdis(&self) -> APORT1YMASTERDIS_R

Bit 3 - APORT1Y Master Disable

pub fn aport2xmasterdis(&self) -> APORT2XMASTERDIS_R

Bit 4 - APORT2X Master Disable

pub fn aport2ymasterdis(&self) -> APORT2YMASTERDIS_R

Bit 5 - APORT2Y Master Disable

pub fn aport3xmasterdis(&self) -> APORT3XMASTERDIS_R

Bit 6 - APORT3X Master Disable

pub fn aport3ymasterdis(&self) -> APORT3YMASTERDIS_R

Bit 7 - APORT3Y Master Disable

pub fn aport4xmasterdis(&self) -> APORT4XMASTERDIS_R

Bit 8 - APORT4X Master Disable

pub fn aport4ymasterdis(&self) -> APORT4YMASTERDIS_R

Bit 9 - APORT4Y Master Disable

impl R<u8, PWRSEL_A>

pub fn variant(&self) -> Variant<u8, PWRSEL_A>

Get enumerated values variant

pub fn is_avdd(&self) -> bool

Checks if the value of the field is AVDD

pub fn is_dvdd(&self) -> bool

Checks if the value of the field is DVDD

pub fn is_iovdd0(&self) -> bool

Checks if the value of the field is IOVDD0

pub fn is_iovdd1(&self) -> bool

Checks if the value of the field is IOVDD1

impl R<u8, INPUTRANGE_A>

pub fn variant(&self) -> Variant<u8, INPUTRANGE_A>

Get enumerated values variant

pub fn is_full(&self) -> bool

Checks if the value of the field is FULL

pub fn is_gtvdddiv2(&self) -> bool

Checks if the value of the field is GTVDDDIV2

pub fn is_ltvdddiv2(&self) -> bool

Checks if the value of the field is LTVDDDIV2

impl R<u32, Reg<u32, _CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Analog Comparator Enable

pub fn inactval(&self) -> INACTVAL_R

Bit 2 - Inactive Value

pub fn gpioinv(&self) -> GPIOINV_R

Bit 3 - Comparator GPIO Output Invert

pub fn aportxmasterdis(&self) -> APORTXMASTERDIS_R

Bit 8 - APORT Bus X Master Disable

pub fn aportymasterdis(&self) -> APORTYMASTERDIS_R

Bit 9 - APORT Bus Y Master Disable

pub fn aportvmasterdis(&self) -> APORTVMASTERDIS_R

Bit 10 - APORT Bus Master Disable for Bus Selected By VASEL

pub fn pwrsel(&self) -> PWRSEL_R

Bits 12:14 - Power Select

pub fn accuracy(&self) -> ACCURACY_R

Bit 15 - ACMP Accuracy Mode

pub fn inputrange(&self) -> INPUTRANGE_R

Bits 18:19 - Input Range

pub fn irise(&self) -> IRISE_R

Bit 20 - Rising Edge Interrupt Sense

pub fn ifall(&self) -> IFALL_R

Bit 21 - Falling Edge Interrupt Sense

pub fn biasprog(&self) -> BIASPROG_R

Bits 24:29 - Bias Configuration

pub fn fullbias(&self) -> FULLBIAS_R

Bit 31 - Full Bias Current

impl R<u8, VASEL_A>

pub fn variant(&self) -> Variant<u8, VASEL_A>

Get enumerated values variant

pub fn is_vdd(&self) -> bool

Checks if the value of the field is VDD

pub fn is_aport2ych0(&self) -> bool

Checks if the value of the field is APORT2YCH0

pub fn is_aport2ych2(&self) -> bool

Checks if the value of the field is APORT2YCH2

pub fn is_aport2ych4(&self) -> bool

Checks if the value of the field is APORT2YCH4

pub fn is_aport2ych6(&self) -> bool

Checks if the value of the field is APORT2YCH6

pub fn is_aport2ych8(&self) -> bool

Checks if the value of the field is APORT2YCH8

pub fn is_aport2ych10(&self) -> bool

Checks if the value of the field is APORT2YCH10

pub fn is_aport2ych12(&self) -> bool

Checks if the value of the field is APORT2YCH12

pub fn is_aport2ych14(&self) -> bool

Checks if the value of the field is APORT2YCH14

pub fn is_aport2ych16(&self) -> bool

Checks if the value of the field is APORT2YCH16

pub fn is_aport2ych18(&self) -> bool

Checks if the value of the field is APORT2YCH18

pub fn is_aport2ych20(&self) -> bool

Checks if the value of the field is APORT2YCH20

pub fn is_aport2ych22(&self) -> bool

Checks if the value of the field is APORT2YCH22

pub fn is_aport2ych24(&self) -> bool

Checks if the value of the field is APORT2YCH24

pub fn is_aport2ych26(&self) -> bool

Checks if the value of the field is APORT2YCH26

pub fn is_aport2ych28(&self) -> bool

Checks if the value of the field is APORT2YCH28

pub fn is_aport2ych30(&self) -> bool

Checks if the value of the field is APORT2YCH30

pub fn is_aport1xch0(&self) -> bool

Checks if the value of the field is APORT1XCH0

pub fn is_aport1ych1(&self) -> bool

Checks if the value of the field is APORT1YCH1

pub fn is_aport1xch2(&self) -> bool

Checks if the value of the field is APORT1XCH2

pub fn is_aport1ych3(&self) -> bool

Checks if the value of the field is APORT1YCH3

pub fn is_aport1xch4(&self) -> bool

Checks if the value of the field is APORT1XCH4

pub fn is_aport1ych5(&self) -> bool

Checks if the value of the field is APORT1YCH5

pub fn is_aport1xch6(&self) -> bool

Checks if the value of the field is APORT1XCH6

pub fn is_aport1ych7(&self) -> bool

Checks if the value of the field is APORT1YCH7

pub fn is_aport1xch8(&self) -> bool

Checks if the value of the field is APORT1XCH8

pub fn is_aport1ych9(&self) -> bool

Checks if the value of the field is APORT1YCH9

pub fn is_aport1xch10(&self) -> bool

Checks if the value of the field is APORT1XCH10

pub fn is_aport1ych11(&self) -> bool

Checks if the value of the field is APORT1YCH11

pub fn is_aport1xch12(&self) -> bool

Checks if the value of the field is APORT1XCH12

pub fn is_aport1ych13(&self) -> bool

Checks if the value of the field is APORT1YCH13

pub fn is_aport1xch14(&self) -> bool

Checks if the value of the field is APORT1XCH14

pub fn is_aport1ych15(&self) -> bool

Checks if the value of the field is APORT1YCH15

pub fn is_aport1xch16(&self) -> bool

Checks if the value of the field is APORT1XCH16

pub fn is_aport1ych17(&self) -> bool

Checks if the value of the field is APORT1YCH17

pub fn is_aport1xch18(&self) -> bool

Checks if the value of the field is APORT1XCH18

pub fn is_aport1ych19(&self) -> bool

Checks if the value of the field is APORT1YCH19

pub fn is_aport1xch20(&self) -> bool

Checks if the value of the field is APORT1XCH20

pub fn is_aport1ych21(&self) -> bool

Checks if the value of the field is APORT1YCH21

pub fn is_aport1xch22(&self) -> bool

Checks if the value of the field is APORT1XCH22

pub fn is_aport1ych23(&self) -> bool

Checks if the value of the field is APORT1YCH23

pub fn is_aport1xch24(&self) -> bool

Checks if the value of the field is APORT1XCH24

pub fn is_aport1ych25(&self) -> bool

Checks if the value of the field is APORT1YCH25

pub fn is_aport1xch26(&self) -> bool

Checks if the value of the field is APORT1XCH26

pub fn is_aport1ych27(&self) -> bool

Checks if the value of the field is APORT1YCH27

pub fn is_aport1xch28(&self) -> bool

Checks if the value of the field is APORT1XCH28

pub fn is_aport1ych29(&self) -> bool

Checks if the value of the field is APORT1YCH29

pub fn is_aport1xch30(&self) -> bool

Checks if the value of the field is APORT1XCH30

pub fn is_aport1ych31(&self) -> bool

Checks if the value of the field is APORT1YCH31

impl R<u8, CSRESSEL_A>

pub fn variant(&self) -> CSRESSEL_A

Get enumerated values variant

pub fn is_res0(&self) -> bool

Checks if the value of the field is RES0

pub fn is_res1(&self) -> bool

Checks if the value of the field is RES1

pub fn is_res2(&self) -> bool

Checks if the value of the field is RES2

pub fn is_res3(&self) -> bool

Checks if the value of the field is RES3

pub fn is_res4(&self) -> bool

Checks if the value of the field is RES4

pub fn is_res5(&self) -> bool

Checks if the value of the field is RES5

pub fn is_res6(&self) -> bool

Checks if the value of the field is RES6

pub fn is_res7(&self) -> bool

Checks if the value of the field is RES7

impl R<u32, Reg<u32, _INPUTSEL>>

pub fn possel(&self) -> POSSEL_R

Bits 0:7 - Positive Input Select

pub fn negsel(&self) -> NEGSEL_R

Bits 8:15 - Negative Input Select

pub fn vasel(&self) -> VASEL_R

Bits 16:21 - VA Selection

pub fn vbsel(&self) -> VBSEL_R

Bit 22 - VB Selection

pub fn vlpsel(&self) -> VLPSEL_R

Bit 24 - Low-Power Sampled Voltage Selection

pub fn csresen(&self) -> CSRESEN_R

Bit 26 - Capacitive Sense Mode Internal Resistor Enable

pub fn csressel(&self) -> CSRESSEL_R

Bits 28:30 - Capacitive Sense Mode Internal Resistor Select

impl R<u32, Reg<u32, _STATUS>>

pub fn acmpact(&self) -> ACMPACT_R

Bit 0 - Analog Comparator Active

pub fn acmpout(&self) -> ACMPOUT_R

Bit 1 - Analog Comparator Output

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 2 - APORT Conflict Output

pub fn extifact(&self) -> EXTIFACT_R

Bit 3 - External Override Interface Active

impl R<u32, Reg<u32, _IF>>

pub fn edge(&self) -> EDGE_R

Bit 0 - Edge Triggered Interrupt Flag

pub fn warmup(&self) -> WARMUP_R

Bit 1 - Warm-up Interrupt Flag

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 2 - APORT Conflict Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn edge(&self) -> EDGE_R

Bit 0 - EDGE Interrupt Enable

pub fn warmup(&self) -> WARMUP_R

Bit 1 - WARMUP Interrupt Enable

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 2 - APORTCONFLICT Interrupt Enable

impl R<u32, Reg<u32, _APORTREQ>>

pub fn aport0xreq(&self) -> APORT0XREQ_R

Bit 0 - 1 If the Bus Connected to APORT0X is Requested

pub fn aport0yreq(&self) -> APORT0YREQ_R

Bit 1 - 1 If the Bus Connected to APORT0Y is Requested

pub fn aport1xreq(&self) -> APORT1XREQ_R

Bit 2 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport1yreq(&self) -> APORT1YREQ_R

Bit 3 - 1 If the Bus Connected to APORT1X is Requested

pub fn aport2xreq(&self) -> APORT2XREQ_R

Bit 4 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport2yreq(&self) -> APORT2YREQ_R

Bit 5 - 1 If the Bus Connected to APORT2Y is Requested

pub fn aport3xreq(&self) -> APORT3XREQ_R

Bit 6 - 1 If the Bus Connected to APORT3X is Requested

pub fn aport3yreq(&self) -> APORT3YREQ_R

Bit 7 - 1 If the Bus Connected to APORT3Y is Requested

pub fn aport4xreq(&self) -> APORT4XREQ_R

Bit 8 - 1 If the Bus Connected to APORT4X is Requested

pub fn aport4yreq(&self) -> APORT4YREQ_R

Bit 9 - 1 If the Bus Connected to APORT4Y is Requested

impl R<u32, Reg<u32, _APORTCONFLICT>>

pub fn aport0xconflict(&self) -> APORT0XCONFLICT_R

Bit 0 - 1 If the Bus Connected to APORT0X is in Conflict With Another Peripheral

pub fn aport0yconflict(&self) -> APORT0YCONFLICT_R

Bit 1 - 1 If the Bus Connected to APORT0Y is in Conflict With Another Peripheral

pub fn aport1xconflict(&self) -> APORT1XCONFLICT_R

Bit 2 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport1yconflict(&self) -> APORT1YCONFLICT_R

Bit 3 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport2xconflict(&self) -> APORT2XCONFLICT_R

Bit 4 - 1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral

pub fn aport2yconflict(&self) -> APORT2YCONFLICT_R

Bit 5 - 1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral

pub fn aport3xconflict(&self) -> APORT3XCONFLICT_R

Bit 6 - 1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral

pub fn aport3yconflict(&self) -> APORT3YCONFLICT_R

Bit 7 - 1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral

pub fn aport4xconflict(&self) -> APORT4XCONFLICT_R

Bit 8 - 1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral

pub fn aport4yconflict(&self) -> APORT4YCONFLICT_R

Bit 9 - 1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral

impl R<u8, HYST_A>

pub fn variant(&self) -> HYST_A

Get enumerated values variant

pub fn is_hyst0(&self) -> bool

Checks if the value of the field is HYST0

pub fn is_hyst1(&self) -> bool

Checks if the value of the field is HYST1

pub fn is_hyst2(&self) -> bool

Checks if the value of the field is HYST2

pub fn is_hyst3(&self) -> bool

Checks if the value of the field is HYST3

pub fn is_hyst4(&self) -> bool

Checks if the value of the field is HYST4

pub fn is_hyst5(&self) -> bool

Checks if the value of the field is HYST5

pub fn is_hyst6(&self) -> bool

Checks if the value of the field is HYST6

pub fn is_hyst7(&self) -> bool

Checks if the value of the field is HYST7

pub fn is_hyst8(&self) -> bool

Checks if the value of the field is HYST8

pub fn is_hyst9(&self) -> bool

Checks if the value of the field is HYST9

pub fn is_hyst10(&self) -> bool

Checks if the value of the field is HYST10

pub fn is_hyst11(&self) -> bool

Checks if the value of the field is HYST11

pub fn is_hyst12(&self) -> bool

Checks if the value of the field is HYST12

pub fn is_hyst13(&self) -> bool

Checks if the value of the field is HYST13

pub fn is_hyst14(&self) -> bool

Checks if the value of the field is HYST14

pub fn is_hyst15(&self) -> bool

Checks if the value of the field is HYST15

impl R<u32, Reg<u32, _HYSTERESIS0>>

pub fn hyst(&self) -> HYST_R

Bits 0:3 - Hysteresis Select When ACMPOUT=0

pub fn divva(&self) -> DIVVA_R

Bits 16:21 - Divider for VA Voltage When ACMPOUT=0

pub fn divvb(&self) -> DIVVB_R

Bits 24:29 - Divider for VB Voltage When ACMPOUT=0

impl R<u8, HYST_A>

pub fn variant(&self) -> HYST_A

Get enumerated values variant

pub fn is_hyst0(&self) -> bool

Checks if the value of the field is HYST0

pub fn is_hyst1(&self) -> bool

Checks if the value of the field is HYST1

pub fn is_hyst2(&self) -> bool

Checks if the value of the field is HYST2

pub fn is_hyst3(&self) -> bool

Checks if the value of the field is HYST3

pub fn is_hyst4(&self) -> bool

Checks if the value of the field is HYST4

pub fn is_hyst5(&self) -> bool

Checks if the value of the field is HYST5

pub fn is_hyst6(&self) -> bool

Checks if the value of the field is HYST6

pub fn is_hyst7(&self) -> bool

Checks if the value of the field is HYST7

pub fn is_hyst8(&self) -> bool

Checks if the value of the field is HYST8

pub fn is_hyst9(&self) -> bool

Checks if the value of the field is HYST9

pub fn is_hyst10(&self) -> bool

Checks if the value of the field is HYST10

pub fn is_hyst11(&self) -> bool

Checks if the value of the field is HYST11

pub fn is_hyst12(&self) -> bool

Checks if the value of the field is HYST12

pub fn is_hyst13(&self) -> bool

Checks if the value of the field is HYST13

pub fn is_hyst14(&self) -> bool

Checks if the value of the field is HYST14

pub fn is_hyst15(&self) -> bool

Checks if the value of the field is HYST15

impl R<u32, Reg<u32, _HYSTERESIS1>>

pub fn hyst(&self) -> HYST_R

Bits 0:3 - Hysteresis Select When ACMPOUT=1

pub fn divva(&self) -> DIVVA_R

Bits 16:21 - Divider for VA Voltage When ACMPOUT=1

pub fn divvb(&self) -> DIVVB_R

Bits 24:29 - Divider for VB Voltage When ACMPOUT=1

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn outpen(&self) -> OUTPEN_R

Bit 0 - ACMP Output Pin Enable

impl R<u8, OUTLOC_A>

pub fn variant(&self) -> Variant<u8, OUTLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn outloc(&self) -> OUTLOC_R

Bits 0:5 - I/O Location

impl R<u8, APORTSEL_A>

pub fn variant(&self) -> Variant<u8, APORTSEL_A>

Get enumerated values variant

pub fn is_aport0x(&self) -> bool

Checks if the value of the field is APORT0X

pub fn is_aport0y(&self) -> bool

Checks if the value of the field is APORT0Y

pub fn is_aport1x(&self) -> bool

Checks if the value of the field is APORT1X

pub fn is_aport1y(&self) -> bool

Checks if the value of the field is APORT1Y

pub fn is_aport1xy(&self) -> bool

Checks if the value of the field is APORT1XY

pub fn is_aport2x(&self) -> bool

Checks if the value of the field is APORT2X

pub fn is_aport2y(&self) -> bool

Checks if the value of the field is APORT2Y

pub fn is_aport2yx(&self) -> bool

Checks if the value of the field is APORT2YX

pub fn is_aport3x(&self) -> bool

Checks if the value of the field is APORT3X

pub fn is_aport3y(&self) -> bool

Checks if the value of the field is APORT3Y

pub fn is_aport3xy(&self) -> bool

Checks if the value of the field is APORT3XY

pub fn is_aport4x(&self) -> bool

Checks if the value of the field is APORT4X

pub fn is_aport4y(&self) -> bool

Checks if the value of the field is APORT4Y

pub fn is_aport4yx(&self) -> bool

Checks if the value of the field is APORT4YX

impl R<u32, Reg<u32, _EXTIFCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable External Interface

pub fn aportsel(&self) -> APORTSEL_R

Bits 4:7 - APORT Selection for External Interface

impl R<u8, PWRSEL_A>

pub fn variant(&self) -> Variant<u8, PWRSEL_A>

Get enumerated values variant

pub fn is_avdd(&self) -> bool

Checks if the value of the field is AVDD

pub fn is_dvdd(&self) -> bool

Checks if the value of the field is DVDD

pub fn is_iovdd0(&self) -> bool

Checks if the value of the field is IOVDD0

pub fn is_iovdd1(&self) -> bool

Checks if the value of the field is IOVDD1

impl R<u8, INPUTRANGE_A>

pub fn variant(&self) -> Variant<u8, INPUTRANGE_A>

Get enumerated values variant

pub fn is_full(&self) -> bool

Checks if the value of the field is FULL

pub fn is_gtvdddiv2(&self) -> bool

Checks if the value of the field is GTVDDDIV2

pub fn is_ltvdddiv2(&self) -> bool

Checks if the value of the field is LTVDDDIV2

impl R<u32, Reg<u32, _CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Analog Comparator Enable

pub fn inactval(&self) -> INACTVAL_R

Bit 2 - Inactive Value

pub fn gpioinv(&self) -> GPIOINV_R

Bit 3 - Comparator GPIO Output Invert

pub fn aportxmasterdis(&self) -> APORTXMASTERDIS_R

Bit 8 - APORT Bus X Master Disable

pub fn aportymasterdis(&self) -> APORTYMASTERDIS_R

Bit 9 - APORT Bus Y Master Disable

pub fn aportvmasterdis(&self) -> APORTVMASTERDIS_R

Bit 10 - APORT Bus Master Disable for Bus Selected By VASEL

pub fn pwrsel(&self) -> PWRSEL_R

Bits 12:14 - Power Select

pub fn accuracy(&self) -> ACCURACY_R

Bit 15 - ACMP Accuracy Mode

pub fn inputrange(&self) -> INPUTRANGE_R

Bits 18:19 - Input Range

pub fn irise(&self) -> IRISE_R

Bit 20 - Rising Edge Interrupt Sense

pub fn ifall(&self) -> IFALL_R

Bit 21 - Falling Edge Interrupt Sense

pub fn biasprog(&self) -> BIASPROG_R

Bits 24:29 - Bias Configuration

pub fn fullbias(&self) -> FULLBIAS_R

Bit 31 - Full Bias Current

impl R<u8, VASEL_A>

pub fn variant(&self) -> Variant<u8, VASEL_A>

Get enumerated values variant

pub fn is_vdd(&self) -> bool

Checks if the value of the field is VDD

pub fn is_aport2ych0(&self) -> bool

Checks if the value of the field is APORT2YCH0

pub fn is_aport2ych2(&self) -> bool

Checks if the value of the field is APORT2YCH2

pub fn is_aport2ych4(&self) -> bool

Checks if the value of the field is APORT2YCH4

pub fn is_aport2ych6(&self) -> bool

Checks if the value of the field is APORT2YCH6

pub fn is_aport2ych8(&self) -> bool

Checks if the value of the field is APORT2YCH8

pub fn is_aport2ych10(&self) -> bool

Checks if the value of the field is APORT2YCH10

pub fn is_aport2ych12(&self) -> bool

Checks if the value of the field is APORT2YCH12

pub fn is_aport2ych14(&self) -> bool

Checks if the value of the field is APORT2YCH14

pub fn is_aport2ych16(&self) -> bool

Checks if the value of the field is APORT2YCH16

pub fn is_aport2ych18(&self) -> bool

Checks if the value of the field is APORT2YCH18

pub fn is_aport2ych20(&self) -> bool

Checks if the value of the field is APORT2YCH20

pub fn is_aport2ych22(&self) -> bool

Checks if the value of the field is APORT2YCH22

pub fn is_aport2ych24(&self) -> bool

Checks if the value of the field is APORT2YCH24

pub fn is_aport2ych26(&self) -> bool

Checks if the value of the field is APORT2YCH26

pub fn is_aport2ych28(&self) -> bool

Checks if the value of the field is APORT2YCH28

pub fn is_aport2ych30(&self) -> bool

Checks if the value of the field is APORT2YCH30

pub fn is_aport1xch0(&self) -> bool

Checks if the value of the field is APORT1XCH0

pub fn is_aport1ych1(&self) -> bool

Checks if the value of the field is APORT1YCH1

pub fn is_aport1xch2(&self) -> bool

Checks if the value of the field is APORT1XCH2

pub fn is_aport1ych3(&self) -> bool

Checks if the value of the field is APORT1YCH3

pub fn is_aport1xch4(&self) -> bool

Checks if the value of the field is APORT1XCH4

pub fn is_aport1ych5(&self) -> bool

Checks if the value of the field is APORT1YCH5

pub fn is_aport1xch6(&self) -> bool

Checks if the value of the field is APORT1XCH6

pub fn is_aport1ych7(&self) -> bool

Checks if the value of the field is APORT1YCH7

pub fn is_aport1xch8(&self) -> bool

Checks if the value of the field is APORT1XCH8

pub fn is_aport1ych9(&self) -> bool

Checks if the value of the field is APORT1YCH9

pub fn is_aport1xch10(&self) -> bool

Checks if the value of the field is APORT1XCH10

pub fn is_aport1ych11(&self) -> bool

Checks if the value of the field is APORT1YCH11

pub fn is_aport1xch12(&self) -> bool

Checks if the value of the field is APORT1XCH12

pub fn is_aport1ych13(&self) -> bool

Checks if the value of the field is APORT1YCH13

pub fn is_aport1xch14(&self) -> bool

Checks if the value of the field is APORT1XCH14

pub fn is_aport1ych15(&self) -> bool

Checks if the value of the field is APORT1YCH15

pub fn is_aport1xch16(&self) -> bool

Checks if the value of the field is APORT1XCH16

pub fn is_aport1ych17(&self) -> bool

Checks if the value of the field is APORT1YCH17

pub fn is_aport1xch18(&self) -> bool

Checks if the value of the field is APORT1XCH18

pub fn is_aport1ych19(&self) -> bool

Checks if the value of the field is APORT1YCH19

pub fn is_aport1xch20(&self) -> bool

Checks if the value of the field is APORT1XCH20

pub fn is_aport1ych21(&self) -> bool

Checks if the value of the field is APORT1YCH21

pub fn is_aport1xch22(&self) -> bool

Checks if the value of the field is APORT1XCH22

pub fn is_aport1ych23(&self) -> bool

Checks if the value of the field is APORT1YCH23

pub fn is_aport1xch24(&self) -> bool

Checks if the value of the field is APORT1XCH24

pub fn is_aport1ych25(&self) -> bool

Checks if the value of the field is APORT1YCH25

pub fn is_aport1xch26(&self) -> bool

Checks if the value of the field is APORT1XCH26

pub fn is_aport1ych27(&self) -> bool

Checks if the value of the field is APORT1YCH27

pub fn is_aport1xch28(&self) -> bool

Checks if the value of the field is APORT1XCH28

pub fn is_aport1ych29(&self) -> bool

Checks if the value of the field is APORT1YCH29

pub fn is_aport1xch30(&self) -> bool

Checks if the value of the field is APORT1XCH30

pub fn is_aport1ych31(&self) -> bool

Checks if the value of the field is APORT1YCH31

impl R<u8, CSRESSEL_A>

pub fn variant(&self) -> CSRESSEL_A

Get enumerated values variant

pub fn is_res0(&self) -> bool

Checks if the value of the field is RES0

pub fn is_res1(&self) -> bool

Checks if the value of the field is RES1

pub fn is_res2(&self) -> bool

Checks if the value of the field is RES2

pub fn is_res3(&self) -> bool

Checks if the value of the field is RES3

pub fn is_res4(&self) -> bool

Checks if the value of the field is RES4

pub fn is_res5(&self) -> bool

Checks if the value of the field is RES5

pub fn is_res6(&self) -> bool

Checks if the value of the field is RES6

pub fn is_res7(&self) -> bool

Checks if the value of the field is RES7

impl R<u32, Reg<u32, _INPUTSEL>>

pub fn possel(&self) -> POSSEL_R

Bits 0:7 - Positive Input Select

pub fn negsel(&self) -> NEGSEL_R

Bits 8:15 - Negative Input Select

pub fn vasel(&self) -> VASEL_R

Bits 16:21 - VA Selection

pub fn vbsel(&self) -> VBSEL_R

Bit 22 - VB Selection

pub fn vlpsel(&self) -> VLPSEL_R

Bit 24 - Low-Power Sampled Voltage Selection

pub fn csresen(&self) -> CSRESEN_R

Bit 26 - Capacitive Sense Mode Internal Resistor Enable

pub fn csressel(&self) -> CSRESSEL_R

Bits 28:30 - Capacitive Sense Mode Internal Resistor Select

impl R<u32, Reg<u32, _STATUS>>

pub fn acmpact(&self) -> ACMPACT_R

Bit 0 - Analog Comparator Active

pub fn acmpout(&self) -> ACMPOUT_R

Bit 1 - Analog Comparator Output

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 2 - APORT Conflict Output

pub fn extifact(&self) -> EXTIFACT_R

Bit 3 - External Override Interface Active

impl R<u32, Reg<u32, _IF>>

pub fn edge(&self) -> EDGE_R

Bit 0 - Edge Triggered Interrupt Flag

pub fn warmup(&self) -> WARMUP_R

Bit 1 - Warm-up Interrupt Flag

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 2 - APORT Conflict Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn edge(&self) -> EDGE_R

Bit 0 - EDGE Interrupt Enable

pub fn warmup(&self) -> WARMUP_R

Bit 1 - WARMUP Interrupt Enable

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 2 - APORTCONFLICT Interrupt Enable

impl R<u32, Reg<u32, _APORTREQ>>

pub fn aport0xreq(&self) -> APORT0XREQ_R

Bit 0 - 1 If the Bus Connected to APORT0X is Requested

pub fn aport0yreq(&self) -> APORT0YREQ_R

Bit 1 - 1 If the Bus Connected to APORT0Y is Requested

pub fn aport1xreq(&self) -> APORT1XREQ_R

Bit 2 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport1yreq(&self) -> APORT1YREQ_R

Bit 3 - 1 If the Bus Connected to APORT1X is Requested

pub fn aport2xreq(&self) -> APORT2XREQ_R

Bit 4 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport2yreq(&self) -> APORT2YREQ_R

Bit 5 - 1 If the Bus Connected to APORT2Y is Requested

pub fn aport3xreq(&self) -> APORT3XREQ_R

Bit 6 - 1 If the Bus Connected to APORT3X is Requested

pub fn aport3yreq(&self) -> APORT3YREQ_R

Bit 7 - 1 If the Bus Connected to APORT3Y is Requested

pub fn aport4xreq(&self) -> APORT4XREQ_R

Bit 8 - 1 If the Bus Connected to APORT4X is Requested

pub fn aport4yreq(&self) -> APORT4YREQ_R

Bit 9 - 1 If the Bus Connected to APORT4Y is Requested

impl R<u32, Reg<u32, _APORTCONFLICT>>

pub fn aport0xconflict(&self) -> APORT0XCONFLICT_R

Bit 0 - 1 If the Bus Connected to APORT0X is in Conflict With Another Peripheral

pub fn aport0yconflict(&self) -> APORT0YCONFLICT_R

Bit 1 - 1 If the Bus Connected to APORT0Y is in Conflict With Another Peripheral

pub fn aport1xconflict(&self) -> APORT1XCONFLICT_R

Bit 2 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport1yconflict(&self) -> APORT1YCONFLICT_R

Bit 3 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport2xconflict(&self) -> APORT2XCONFLICT_R

Bit 4 - 1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral

pub fn aport2yconflict(&self) -> APORT2YCONFLICT_R

Bit 5 - 1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral

pub fn aport3xconflict(&self) -> APORT3XCONFLICT_R

Bit 6 - 1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral

pub fn aport3yconflict(&self) -> APORT3YCONFLICT_R

Bit 7 - 1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral

pub fn aport4xconflict(&self) -> APORT4XCONFLICT_R

Bit 8 - 1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral

pub fn aport4yconflict(&self) -> APORT4YCONFLICT_R

Bit 9 - 1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral

impl R<u8, HYST_A>

pub fn variant(&self) -> HYST_A

Get enumerated values variant

pub fn is_hyst0(&self) -> bool

Checks if the value of the field is HYST0

pub fn is_hyst1(&self) -> bool

Checks if the value of the field is HYST1

pub fn is_hyst2(&self) -> bool

Checks if the value of the field is HYST2

pub fn is_hyst3(&self) -> bool

Checks if the value of the field is HYST3

pub fn is_hyst4(&self) -> bool

Checks if the value of the field is HYST4

pub fn is_hyst5(&self) -> bool

Checks if the value of the field is HYST5

pub fn is_hyst6(&self) -> bool

Checks if the value of the field is HYST6

pub fn is_hyst7(&self) -> bool

Checks if the value of the field is HYST7

pub fn is_hyst8(&self) -> bool

Checks if the value of the field is HYST8

pub fn is_hyst9(&self) -> bool

Checks if the value of the field is HYST9

pub fn is_hyst10(&self) -> bool

Checks if the value of the field is HYST10

pub fn is_hyst11(&self) -> bool

Checks if the value of the field is HYST11

pub fn is_hyst12(&self) -> bool

Checks if the value of the field is HYST12

pub fn is_hyst13(&self) -> bool

Checks if the value of the field is HYST13

pub fn is_hyst14(&self) -> bool

Checks if the value of the field is HYST14

pub fn is_hyst15(&self) -> bool

Checks if the value of the field is HYST15

impl R<u32, Reg<u32, _HYSTERESIS0>>

pub fn hyst(&self) -> HYST_R

Bits 0:3 - Hysteresis Select When ACMPOUT=0

pub fn divva(&self) -> DIVVA_R

Bits 16:21 - Divider for VA Voltage When ACMPOUT=0

pub fn divvb(&self) -> DIVVB_R

Bits 24:29 - Divider for VB Voltage When ACMPOUT=0

impl R<u8, HYST_A>

pub fn variant(&self) -> HYST_A

Get enumerated values variant

pub fn is_hyst0(&self) -> bool

Checks if the value of the field is HYST0

pub fn is_hyst1(&self) -> bool

Checks if the value of the field is HYST1

pub fn is_hyst2(&self) -> bool

Checks if the value of the field is HYST2

pub fn is_hyst3(&self) -> bool

Checks if the value of the field is HYST3

pub fn is_hyst4(&self) -> bool

Checks if the value of the field is HYST4

pub fn is_hyst5(&self) -> bool

Checks if the value of the field is HYST5

pub fn is_hyst6(&self) -> bool

Checks if the value of the field is HYST6

pub fn is_hyst7(&self) -> bool

Checks if the value of the field is HYST7

pub fn is_hyst8(&self) -> bool

Checks if the value of the field is HYST8

pub fn is_hyst9(&self) -> bool

Checks if the value of the field is HYST9

pub fn is_hyst10(&self) -> bool

Checks if the value of the field is HYST10

pub fn is_hyst11(&self) -> bool

Checks if the value of the field is HYST11

pub fn is_hyst12(&self) -> bool

Checks if the value of the field is HYST12

pub fn is_hyst13(&self) -> bool

Checks if the value of the field is HYST13

pub fn is_hyst14(&self) -> bool

Checks if the value of the field is HYST14

pub fn is_hyst15(&self) -> bool

Checks if the value of the field is HYST15

impl R<u32, Reg<u32, _HYSTERESIS1>>

pub fn hyst(&self) -> HYST_R

Bits 0:3 - Hysteresis Select When ACMPOUT=1

pub fn divva(&self) -> DIVVA_R

Bits 16:21 - Divider for VA Voltage When ACMPOUT=1

pub fn divvb(&self) -> DIVVB_R

Bits 24:29 - Divider for VB Voltage When ACMPOUT=1

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn outpen(&self) -> OUTPEN_R

Bit 0 - ACMP Output Pin Enable

impl R<u8, OUTLOC_A>

pub fn variant(&self) -> Variant<u8, OUTLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn outloc(&self) -> OUTLOC_R

Bits 0:5 - I/O Location

impl R<u8, APORTSEL_A>

pub fn variant(&self) -> Variant<u8, APORTSEL_A>

Get enumerated values variant

pub fn is_aport0x(&self) -> bool

Checks if the value of the field is APORT0X

pub fn is_aport0y(&self) -> bool

Checks if the value of the field is APORT0Y

pub fn is_aport1x(&self) -> bool

Checks if the value of the field is APORT1X

pub fn is_aport1y(&self) -> bool

Checks if the value of the field is APORT1Y

pub fn is_aport1xy(&self) -> bool

Checks if the value of the field is APORT1XY

pub fn is_aport2x(&self) -> bool

Checks if the value of the field is APORT2X

pub fn is_aport2y(&self) -> bool

Checks if the value of the field is APORT2Y

pub fn is_aport2yx(&self) -> bool

Checks if the value of the field is APORT2YX

pub fn is_aport3x(&self) -> bool

Checks if the value of the field is APORT3X

pub fn is_aport3y(&self) -> bool

Checks if the value of the field is APORT3Y

pub fn is_aport3xy(&self) -> bool

Checks if the value of the field is APORT3XY

pub fn is_aport4x(&self) -> bool

Checks if the value of the field is APORT4X

pub fn is_aport4y(&self) -> bool

Checks if the value of the field is APORT4Y

pub fn is_aport4yx(&self) -> bool

Checks if the value of the field is APORT4YX

impl R<u32, Reg<u32, _EXTIFCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable External Interface

pub fn aportsel(&self) -> APORTSEL_R

Bits 4:7 - APORT Selection for External Interface

impl R<u8, PWRSEL_A>

pub fn variant(&self) -> Variant<u8, PWRSEL_A>

Get enumerated values variant

pub fn is_avdd(&self) -> bool

Checks if the value of the field is AVDD

pub fn is_dvdd(&self) -> bool

Checks if the value of the field is DVDD

pub fn is_iovdd0(&self) -> bool

Checks if the value of the field is IOVDD0

pub fn is_iovdd1(&self) -> bool

Checks if the value of the field is IOVDD1

impl R<u8, INPUTRANGE_A>

pub fn variant(&self) -> Variant<u8, INPUTRANGE_A>

Get enumerated values variant

pub fn is_full(&self) -> bool

Checks if the value of the field is FULL

pub fn is_gtvdddiv2(&self) -> bool

Checks if the value of the field is GTVDDDIV2

pub fn is_ltvdddiv2(&self) -> bool

Checks if the value of the field is LTVDDDIV2

impl R<u32, Reg<u32, _CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Analog Comparator Enable

pub fn inactval(&self) -> INACTVAL_R

Bit 2 - Inactive Value

pub fn gpioinv(&self) -> GPIOINV_R

Bit 3 - Comparator GPIO Output Invert

pub fn aportxmasterdis(&self) -> APORTXMASTERDIS_R

Bit 8 - APORT Bus X Master Disable

pub fn aportymasterdis(&self) -> APORTYMASTERDIS_R

Bit 9 - APORT Bus Y Master Disable

pub fn aportvmasterdis(&self) -> APORTVMASTERDIS_R

Bit 10 - APORT Bus Master Disable for Bus Selected By VASEL

pub fn pwrsel(&self) -> PWRSEL_R

Bits 12:14 - Power Select

pub fn accuracy(&self) -> ACCURACY_R

Bit 15 - ACMP Accuracy Mode

pub fn inputrange(&self) -> INPUTRANGE_R

Bits 18:19 - Input Range

pub fn irise(&self) -> IRISE_R

Bit 20 - Rising Edge Interrupt Sense

pub fn ifall(&self) -> IFALL_R

Bit 21 - Falling Edge Interrupt Sense

pub fn biasprog(&self) -> BIASPROG_R

Bits 24:29 - Bias Configuration

pub fn fullbias(&self) -> FULLBIAS_R

Bit 31 - Full Bias Current

impl R<u8, VASEL_A>

pub fn variant(&self) -> Variant<u8, VASEL_A>

Get enumerated values variant

pub fn is_vdd(&self) -> bool

Checks if the value of the field is VDD

pub fn is_aport2ych0(&self) -> bool

Checks if the value of the field is APORT2YCH0

pub fn is_aport2ych2(&self) -> bool

Checks if the value of the field is APORT2YCH2

pub fn is_aport2ych4(&self) -> bool

Checks if the value of the field is APORT2YCH4

pub fn is_aport2ych6(&self) -> bool

Checks if the value of the field is APORT2YCH6

pub fn is_aport2ych8(&self) -> bool

Checks if the value of the field is APORT2YCH8

pub fn is_aport2ych10(&self) -> bool

Checks if the value of the field is APORT2YCH10

pub fn is_aport2ych12(&self) -> bool

Checks if the value of the field is APORT2YCH12

pub fn is_aport2ych14(&self) -> bool

Checks if the value of the field is APORT2YCH14

pub fn is_aport2ych16(&self) -> bool

Checks if the value of the field is APORT2YCH16

pub fn is_aport2ych18(&self) -> bool

Checks if the value of the field is APORT2YCH18

pub fn is_aport2ych20(&self) -> bool

Checks if the value of the field is APORT2YCH20

pub fn is_aport2ych22(&self) -> bool

Checks if the value of the field is APORT2YCH22

pub fn is_aport2ych24(&self) -> bool

Checks if the value of the field is APORT2YCH24

pub fn is_aport2ych26(&self) -> bool

Checks if the value of the field is APORT2YCH26

pub fn is_aport2ych28(&self) -> bool

Checks if the value of the field is APORT2YCH28

pub fn is_aport2ych30(&self) -> bool

Checks if the value of the field is APORT2YCH30

pub fn is_aport1xch0(&self) -> bool

Checks if the value of the field is APORT1XCH0

pub fn is_aport1ych1(&self) -> bool

Checks if the value of the field is APORT1YCH1

pub fn is_aport1xch2(&self) -> bool

Checks if the value of the field is APORT1XCH2

pub fn is_aport1ych3(&self) -> bool

Checks if the value of the field is APORT1YCH3

pub fn is_aport1xch4(&self) -> bool

Checks if the value of the field is APORT1XCH4

pub fn is_aport1ych5(&self) -> bool

Checks if the value of the field is APORT1YCH5

pub fn is_aport1xch6(&self) -> bool

Checks if the value of the field is APORT1XCH6

pub fn is_aport1ych7(&self) -> bool

Checks if the value of the field is APORT1YCH7

pub fn is_aport1xch8(&self) -> bool

Checks if the value of the field is APORT1XCH8

pub fn is_aport1ych9(&self) -> bool

Checks if the value of the field is APORT1YCH9

pub fn is_aport1xch10(&self) -> bool

Checks if the value of the field is APORT1XCH10

pub fn is_aport1ych11(&self) -> bool

Checks if the value of the field is APORT1YCH11

pub fn is_aport1xch12(&self) -> bool

Checks if the value of the field is APORT1XCH12

pub fn is_aport1ych13(&self) -> bool

Checks if the value of the field is APORT1YCH13

pub fn is_aport1xch14(&self) -> bool

Checks if the value of the field is APORT1XCH14

pub fn is_aport1ych15(&self) -> bool

Checks if the value of the field is APORT1YCH15

pub fn is_aport1xch16(&self) -> bool

Checks if the value of the field is APORT1XCH16

pub fn is_aport1ych17(&self) -> bool

Checks if the value of the field is APORT1YCH17

pub fn is_aport1xch18(&self) -> bool

Checks if the value of the field is APORT1XCH18

pub fn is_aport1ych19(&self) -> bool

Checks if the value of the field is APORT1YCH19

pub fn is_aport1xch20(&self) -> bool

Checks if the value of the field is APORT1XCH20

pub fn is_aport1ych21(&self) -> bool

Checks if the value of the field is APORT1YCH21

pub fn is_aport1xch22(&self) -> bool

Checks if the value of the field is APORT1XCH22

pub fn is_aport1ych23(&self) -> bool

Checks if the value of the field is APORT1YCH23

pub fn is_aport1xch24(&self) -> bool

Checks if the value of the field is APORT1XCH24

pub fn is_aport1ych25(&self) -> bool

Checks if the value of the field is APORT1YCH25

pub fn is_aport1xch26(&self) -> bool

Checks if the value of the field is APORT1XCH26

pub fn is_aport1ych27(&self) -> bool

Checks if the value of the field is APORT1YCH27

pub fn is_aport1xch28(&self) -> bool

Checks if the value of the field is APORT1XCH28

pub fn is_aport1ych29(&self) -> bool

Checks if the value of the field is APORT1YCH29

pub fn is_aport1xch30(&self) -> bool

Checks if the value of the field is APORT1XCH30

pub fn is_aport1ych31(&self) -> bool

Checks if the value of the field is APORT1YCH31

impl R<u8, CSRESSEL_A>

pub fn variant(&self) -> CSRESSEL_A

Get enumerated values variant

pub fn is_res0(&self) -> bool

Checks if the value of the field is RES0

pub fn is_res1(&self) -> bool

Checks if the value of the field is RES1

pub fn is_res2(&self) -> bool

Checks if the value of the field is RES2

pub fn is_res3(&self) -> bool

Checks if the value of the field is RES3

pub fn is_res4(&self) -> bool

Checks if the value of the field is RES4

pub fn is_res5(&self) -> bool

Checks if the value of the field is RES5

pub fn is_res6(&self) -> bool

Checks if the value of the field is RES6

pub fn is_res7(&self) -> bool

Checks if the value of the field is RES7

impl R<u32, Reg<u32, _INPUTSEL>>

pub fn possel(&self) -> POSSEL_R

Bits 0:7 - Positive Input Select

pub fn negsel(&self) -> NEGSEL_R

Bits 8:15 - Negative Input Select

pub fn vasel(&self) -> VASEL_R

Bits 16:21 - VA Selection

pub fn vbsel(&self) -> VBSEL_R

Bit 22 - VB Selection

pub fn vlpsel(&self) -> VLPSEL_R

Bit 24 - Low-Power Sampled Voltage Selection

pub fn csresen(&self) -> CSRESEN_R

Bit 26 - Capacitive Sense Mode Internal Resistor Enable

pub fn csressel(&self) -> CSRESSEL_R

Bits 28:30 - Capacitive Sense Mode Internal Resistor Select

impl R<u32, Reg<u32, _STATUS>>

pub fn acmpact(&self) -> ACMPACT_R

Bit 0 - Analog Comparator Active

pub fn acmpout(&self) -> ACMPOUT_R

Bit 1 - Analog Comparator Output

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 2 - APORT Conflict Output

pub fn extifact(&self) -> EXTIFACT_R

Bit 3 - External Override Interface Active

impl R<u32, Reg<u32, _IF>>

pub fn edge(&self) -> EDGE_R

Bit 0 - Edge Triggered Interrupt Flag

pub fn warmup(&self) -> WARMUP_R

Bit 1 - Warm-up Interrupt Flag

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 2 - APORT Conflict Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn edge(&self) -> EDGE_R

Bit 0 - EDGE Interrupt Enable

pub fn warmup(&self) -> WARMUP_R

Bit 1 - WARMUP Interrupt Enable

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 2 - APORTCONFLICT Interrupt Enable

impl R<u32, Reg<u32, _APORTREQ>>

pub fn aport0xreq(&self) -> APORT0XREQ_R

Bit 0 - 1 If the Bus Connected to APORT0X is Requested

pub fn aport0yreq(&self) -> APORT0YREQ_R

Bit 1 - 1 If the Bus Connected to APORT0Y is Requested

pub fn aport1xreq(&self) -> APORT1XREQ_R

Bit 2 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport1yreq(&self) -> APORT1YREQ_R

Bit 3 - 1 If the Bus Connected to APORT1X is Requested

pub fn aport2xreq(&self) -> APORT2XREQ_R

Bit 4 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport2yreq(&self) -> APORT2YREQ_R

Bit 5 - 1 If the Bus Connected to APORT2Y is Requested

pub fn aport3xreq(&self) -> APORT3XREQ_R

Bit 6 - 1 If the Bus Connected to APORT3X is Requested

pub fn aport3yreq(&self) -> APORT3YREQ_R

Bit 7 - 1 If the Bus Connected to APORT3Y is Requested

pub fn aport4xreq(&self) -> APORT4XREQ_R

Bit 8 - 1 If the Bus Connected to APORT4X is Requested

pub fn aport4yreq(&self) -> APORT4YREQ_R

Bit 9 - 1 If the Bus Connected to APORT4Y is Requested

impl R<u32, Reg<u32, _APORTCONFLICT>>

pub fn aport0xconflict(&self) -> APORT0XCONFLICT_R

Bit 0 - 1 If the Bus Connected to APORT0X is in Conflict With Another Peripheral

pub fn aport0yconflict(&self) -> APORT0YCONFLICT_R

Bit 1 - 1 If the Bus Connected to APORT0Y is in Conflict With Another Peripheral

pub fn aport1xconflict(&self) -> APORT1XCONFLICT_R

Bit 2 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport1yconflict(&self) -> APORT1YCONFLICT_R

Bit 3 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport2xconflict(&self) -> APORT2XCONFLICT_R

Bit 4 - 1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral

pub fn aport2yconflict(&self) -> APORT2YCONFLICT_R

Bit 5 - 1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral

pub fn aport3xconflict(&self) -> APORT3XCONFLICT_R

Bit 6 - 1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral

pub fn aport3yconflict(&self) -> APORT3YCONFLICT_R

Bit 7 - 1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral

pub fn aport4xconflict(&self) -> APORT4XCONFLICT_R

Bit 8 - 1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral

pub fn aport4yconflict(&self) -> APORT4YCONFLICT_R

Bit 9 - 1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral

impl R<u8, HYST_A>

pub fn variant(&self) -> HYST_A

Get enumerated values variant

pub fn is_hyst0(&self) -> bool

Checks if the value of the field is HYST0

pub fn is_hyst1(&self) -> bool

Checks if the value of the field is HYST1

pub fn is_hyst2(&self) -> bool

Checks if the value of the field is HYST2

pub fn is_hyst3(&self) -> bool

Checks if the value of the field is HYST3

pub fn is_hyst4(&self) -> bool

Checks if the value of the field is HYST4

pub fn is_hyst5(&self) -> bool

Checks if the value of the field is HYST5

pub fn is_hyst6(&self) -> bool

Checks if the value of the field is HYST6

pub fn is_hyst7(&self) -> bool

Checks if the value of the field is HYST7

pub fn is_hyst8(&self) -> bool

Checks if the value of the field is HYST8

pub fn is_hyst9(&self) -> bool

Checks if the value of the field is HYST9

pub fn is_hyst10(&self) -> bool

Checks if the value of the field is HYST10

pub fn is_hyst11(&self) -> bool

Checks if the value of the field is HYST11

pub fn is_hyst12(&self) -> bool

Checks if the value of the field is HYST12

pub fn is_hyst13(&self) -> bool

Checks if the value of the field is HYST13

pub fn is_hyst14(&self) -> bool

Checks if the value of the field is HYST14

pub fn is_hyst15(&self) -> bool

Checks if the value of the field is HYST15

impl R<u32, Reg<u32, _HYSTERESIS0>>

pub fn hyst(&self) -> HYST_R

Bits 0:3 - Hysteresis Select When ACMPOUT=0

pub fn divva(&self) -> DIVVA_R

Bits 16:21 - Divider for VA Voltage When ACMPOUT=0

pub fn divvb(&self) -> DIVVB_R

Bits 24:29 - Divider for VB Voltage When ACMPOUT=0

impl R<u8, HYST_A>

pub fn variant(&self) -> HYST_A

Get enumerated values variant

pub fn is_hyst0(&self) -> bool

Checks if the value of the field is HYST0

pub fn is_hyst1(&self) -> bool

Checks if the value of the field is HYST1

pub fn is_hyst2(&self) -> bool

Checks if the value of the field is HYST2

pub fn is_hyst3(&self) -> bool

Checks if the value of the field is HYST3

pub fn is_hyst4(&self) -> bool

Checks if the value of the field is HYST4

pub fn is_hyst5(&self) -> bool

Checks if the value of the field is HYST5

pub fn is_hyst6(&self) -> bool

Checks if the value of the field is HYST6

pub fn is_hyst7(&self) -> bool

Checks if the value of the field is HYST7

pub fn is_hyst8(&self) -> bool

Checks if the value of the field is HYST8

pub fn is_hyst9(&self) -> bool

Checks if the value of the field is HYST9

pub fn is_hyst10(&self) -> bool

Checks if the value of the field is HYST10

pub fn is_hyst11(&self) -> bool

Checks if the value of the field is HYST11

pub fn is_hyst12(&self) -> bool

Checks if the value of the field is HYST12

pub fn is_hyst13(&self) -> bool

Checks if the value of the field is HYST13

pub fn is_hyst14(&self) -> bool

Checks if the value of the field is HYST14

pub fn is_hyst15(&self) -> bool

Checks if the value of the field is HYST15

impl R<u32, Reg<u32, _HYSTERESIS1>>

pub fn hyst(&self) -> HYST_R

Bits 0:3 - Hysteresis Select When ACMPOUT=1

pub fn divva(&self) -> DIVVA_R

Bits 16:21 - Divider for VA Voltage When ACMPOUT=1

pub fn divvb(&self) -> DIVVB_R

Bits 24:29 - Divider for VB Voltage When ACMPOUT=1

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn outpen(&self) -> OUTPEN_R

Bit 0 - ACMP Output Pin Enable

impl R<u8, OUTLOC_A>

pub fn variant(&self) -> Variant<u8, OUTLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn outloc(&self) -> OUTLOC_R

Bits 0:5 - I/O Location

impl R<u8, APORTSEL_A>

pub fn variant(&self) -> Variant<u8, APORTSEL_A>

Get enumerated values variant

pub fn is_aport0x(&self) -> bool

Checks if the value of the field is APORT0X

pub fn is_aport0y(&self) -> bool

Checks if the value of the field is APORT0Y

pub fn is_aport1x(&self) -> bool

Checks if the value of the field is APORT1X

pub fn is_aport1y(&self) -> bool

Checks if the value of the field is APORT1Y

pub fn is_aport1xy(&self) -> bool

Checks if the value of the field is APORT1XY

pub fn is_aport2x(&self) -> bool

Checks if the value of the field is APORT2X

pub fn is_aport2y(&self) -> bool

Checks if the value of the field is APORT2Y

pub fn is_aport2yx(&self) -> bool

Checks if the value of the field is APORT2YX

pub fn is_aport3x(&self) -> bool

Checks if the value of the field is APORT3X

pub fn is_aport3y(&self) -> bool

Checks if the value of the field is APORT3Y

pub fn is_aport3xy(&self) -> bool

Checks if the value of the field is APORT3XY

pub fn is_aport4x(&self) -> bool

Checks if the value of the field is APORT4X

pub fn is_aport4y(&self) -> bool

Checks if the value of the field is APORT4Y

pub fn is_aport4yx(&self) -> bool

Checks if the value of the field is APORT4YX

impl R<u32, Reg<u32, _EXTIFCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable External Interface

pub fn aportsel(&self) -> APORTSEL_R

Bits 4:7 - APORT Selection for External Interface

impl R<u8, PWRSEL_A>

pub fn variant(&self) -> Variant<u8, PWRSEL_A>

Get enumerated values variant

pub fn is_avdd(&self) -> bool

Checks if the value of the field is AVDD

pub fn is_dvdd(&self) -> bool

Checks if the value of the field is DVDD

pub fn is_iovdd0(&self) -> bool

Checks if the value of the field is IOVDD0

pub fn is_iovdd1(&self) -> bool

Checks if the value of the field is IOVDD1

impl R<u8, INPUTRANGE_A>

pub fn variant(&self) -> Variant<u8, INPUTRANGE_A>

Get enumerated values variant

pub fn is_full(&self) -> bool

Checks if the value of the field is FULL

pub fn is_gtvdddiv2(&self) -> bool

Checks if the value of the field is GTVDDDIV2

pub fn is_ltvdddiv2(&self) -> bool

Checks if the value of the field is LTVDDDIV2

impl R<u32, Reg<u32, _CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Analog Comparator Enable

pub fn inactval(&self) -> INACTVAL_R

Bit 2 - Inactive Value

pub fn gpioinv(&self) -> GPIOINV_R

Bit 3 - Comparator GPIO Output Invert

pub fn aportxmasterdis(&self) -> APORTXMASTERDIS_R

Bit 8 - APORT Bus X Master Disable

pub fn aportymasterdis(&self) -> APORTYMASTERDIS_R

Bit 9 - APORT Bus Y Master Disable

pub fn aportvmasterdis(&self) -> APORTVMASTERDIS_R

Bit 10 - APORT Bus Master Disable for Bus Selected By VASEL

pub fn pwrsel(&self) -> PWRSEL_R

Bits 12:14 - Power Select

pub fn accuracy(&self) -> ACCURACY_R

Bit 15 - ACMP Accuracy Mode

pub fn inputrange(&self) -> INPUTRANGE_R

Bits 18:19 - Input Range

pub fn irise(&self) -> IRISE_R

Bit 20 - Rising Edge Interrupt Sense

pub fn ifall(&self) -> IFALL_R

Bit 21 - Falling Edge Interrupt Sense

pub fn biasprog(&self) -> BIASPROG_R

Bits 24:29 - Bias Configuration

pub fn fullbias(&self) -> FULLBIAS_R

Bit 31 - Full Bias Current

impl R<u8, VASEL_A>

pub fn variant(&self) -> Variant<u8, VASEL_A>

Get enumerated values variant

pub fn is_vdd(&self) -> bool

Checks if the value of the field is VDD

pub fn is_aport2ych0(&self) -> bool

Checks if the value of the field is APORT2YCH0

pub fn is_aport2ych2(&self) -> bool

Checks if the value of the field is APORT2YCH2

pub fn is_aport2ych4(&self) -> bool

Checks if the value of the field is APORT2YCH4

pub fn is_aport2ych6(&self) -> bool

Checks if the value of the field is APORT2YCH6

pub fn is_aport2ych8(&self) -> bool

Checks if the value of the field is APORT2YCH8

pub fn is_aport2ych10(&self) -> bool

Checks if the value of the field is APORT2YCH10

pub fn is_aport2ych12(&self) -> bool

Checks if the value of the field is APORT2YCH12

pub fn is_aport2ych14(&self) -> bool

Checks if the value of the field is APORT2YCH14

pub fn is_aport2ych16(&self) -> bool

Checks if the value of the field is APORT2YCH16

pub fn is_aport2ych18(&self) -> bool

Checks if the value of the field is APORT2YCH18

pub fn is_aport2ych20(&self) -> bool

Checks if the value of the field is APORT2YCH20

pub fn is_aport2ych22(&self) -> bool

Checks if the value of the field is APORT2YCH22

pub fn is_aport2ych24(&self) -> bool

Checks if the value of the field is APORT2YCH24

pub fn is_aport2ych26(&self) -> bool

Checks if the value of the field is APORT2YCH26

pub fn is_aport2ych28(&self) -> bool

Checks if the value of the field is APORT2YCH28

pub fn is_aport2ych30(&self) -> bool

Checks if the value of the field is APORT2YCH30

pub fn is_aport1xch0(&self) -> bool

Checks if the value of the field is APORT1XCH0

pub fn is_aport1ych1(&self) -> bool

Checks if the value of the field is APORT1YCH1

pub fn is_aport1xch2(&self) -> bool

Checks if the value of the field is APORT1XCH2

pub fn is_aport1ych3(&self) -> bool

Checks if the value of the field is APORT1YCH3

pub fn is_aport1xch4(&self) -> bool

Checks if the value of the field is APORT1XCH4

pub fn is_aport1ych5(&self) -> bool

Checks if the value of the field is APORT1YCH5

pub fn is_aport1xch6(&self) -> bool

Checks if the value of the field is APORT1XCH6

pub fn is_aport1ych7(&self) -> bool

Checks if the value of the field is APORT1YCH7

pub fn is_aport1xch8(&self) -> bool

Checks if the value of the field is APORT1XCH8

pub fn is_aport1ych9(&self) -> bool

Checks if the value of the field is APORT1YCH9

pub fn is_aport1xch10(&self) -> bool

Checks if the value of the field is APORT1XCH10

pub fn is_aport1ych11(&self) -> bool

Checks if the value of the field is APORT1YCH11

pub fn is_aport1xch12(&self) -> bool

Checks if the value of the field is APORT1XCH12

pub fn is_aport1ych13(&self) -> bool

Checks if the value of the field is APORT1YCH13

pub fn is_aport1xch14(&self) -> bool

Checks if the value of the field is APORT1XCH14

pub fn is_aport1ych15(&self) -> bool

Checks if the value of the field is APORT1YCH15

pub fn is_aport1xch16(&self) -> bool

Checks if the value of the field is APORT1XCH16

pub fn is_aport1ych17(&self) -> bool

Checks if the value of the field is APORT1YCH17

pub fn is_aport1xch18(&self) -> bool

Checks if the value of the field is APORT1XCH18

pub fn is_aport1ych19(&self) -> bool

Checks if the value of the field is APORT1YCH19

pub fn is_aport1xch20(&self) -> bool

Checks if the value of the field is APORT1XCH20

pub fn is_aport1ych21(&self) -> bool

Checks if the value of the field is APORT1YCH21

pub fn is_aport1xch22(&self) -> bool

Checks if the value of the field is APORT1XCH22

pub fn is_aport1ych23(&self) -> bool

Checks if the value of the field is APORT1YCH23

pub fn is_aport1xch24(&self) -> bool

Checks if the value of the field is APORT1XCH24

pub fn is_aport1ych25(&self) -> bool

Checks if the value of the field is APORT1YCH25

pub fn is_aport1xch26(&self) -> bool

Checks if the value of the field is APORT1XCH26

pub fn is_aport1ych27(&self) -> bool

Checks if the value of the field is APORT1YCH27

pub fn is_aport1xch28(&self) -> bool

Checks if the value of the field is APORT1XCH28

pub fn is_aport1ych29(&self) -> bool

Checks if the value of the field is APORT1YCH29

pub fn is_aport1xch30(&self) -> bool

Checks if the value of the field is APORT1XCH30

pub fn is_aport1ych31(&self) -> bool

Checks if the value of the field is APORT1YCH31

impl R<u8, CSRESSEL_A>

pub fn variant(&self) -> CSRESSEL_A

Get enumerated values variant

pub fn is_res0(&self) -> bool

Checks if the value of the field is RES0

pub fn is_res1(&self) -> bool

Checks if the value of the field is RES1

pub fn is_res2(&self) -> bool

Checks if the value of the field is RES2

pub fn is_res3(&self) -> bool

Checks if the value of the field is RES3

pub fn is_res4(&self) -> bool

Checks if the value of the field is RES4

pub fn is_res5(&self) -> bool

Checks if the value of the field is RES5

pub fn is_res6(&self) -> bool

Checks if the value of the field is RES6

pub fn is_res7(&self) -> bool

Checks if the value of the field is RES7

impl R<u32, Reg<u32, _INPUTSEL>>

pub fn possel(&self) -> POSSEL_R

Bits 0:7 - Positive Input Select

pub fn negsel(&self) -> NEGSEL_R

Bits 8:15 - Negative Input Select

pub fn vasel(&self) -> VASEL_R

Bits 16:21 - VA Selection

pub fn vbsel(&self) -> VBSEL_R

Bit 22 - VB Selection

pub fn vlpsel(&self) -> VLPSEL_R

Bit 24 - Low-Power Sampled Voltage Selection

pub fn csresen(&self) -> CSRESEN_R

Bit 26 - Capacitive Sense Mode Internal Resistor Enable

pub fn csressel(&self) -> CSRESSEL_R

Bits 28:30 - Capacitive Sense Mode Internal Resistor Select

impl R<u32, Reg<u32, _STATUS>>

pub fn acmpact(&self) -> ACMPACT_R

Bit 0 - Analog Comparator Active

pub fn acmpout(&self) -> ACMPOUT_R

Bit 1 - Analog Comparator Output

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 2 - APORT Conflict Output

pub fn extifact(&self) -> EXTIFACT_R

Bit 3 - External Override Interface Active

impl R<u32, Reg<u32, _IF>>

pub fn edge(&self) -> EDGE_R

Bit 0 - Edge Triggered Interrupt Flag

pub fn warmup(&self) -> WARMUP_R

Bit 1 - Warm-up Interrupt Flag

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 2 - APORT Conflict Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn edge(&self) -> EDGE_R

Bit 0 - EDGE Interrupt Enable

pub fn warmup(&self) -> WARMUP_R

Bit 1 - WARMUP Interrupt Enable

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 2 - APORTCONFLICT Interrupt Enable

impl R<u32, Reg<u32, _APORTREQ>>

pub fn aport0xreq(&self) -> APORT0XREQ_R

Bit 0 - 1 If the Bus Connected to APORT0X is Requested

pub fn aport0yreq(&self) -> APORT0YREQ_R

Bit 1 - 1 If the Bus Connected to APORT0Y is Requested

pub fn aport1xreq(&self) -> APORT1XREQ_R

Bit 2 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport1yreq(&self) -> APORT1YREQ_R

Bit 3 - 1 If the Bus Connected to APORT1X is Requested

pub fn aport2xreq(&self) -> APORT2XREQ_R

Bit 4 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport2yreq(&self) -> APORT2YREQ_R

Bit 5 - 1 If the Bus Connected to APORT2Y is Requested

pub fn aport3xreq(&self) -> APORT3XREQ_R

Bit 6 - 1 If the Bus Connected to APORT3X is Requested

pub fn aport3yreq(&self) -> APORT3YREQ_R

Bit 7 - 1 If the Bus Connected to APORT3Y is Requested

pub fn aport4xreq(&self) -> APORT4XREQ_R

Bit 8 - 1 If the Bus Connected to APORT4X is Requested

pub fn aport4yreq(&self) -> APORT4YREQ_R

Bit 9 - 1 If the Bus Connected to APORT4Y is Requested

impl R<u32, Reg<u32, _APORTCONFLICT>>

pub fn aport0xconflict(&self) -> APORT0XCONFLICT_R

Bit 0 - 1 If the Bus Connected to APORT0X is in Conflict With Another Peripheral

pub fn aport0yconflict(&self) -> APORT0YCONFLICT_R

Bit 1 - 1 If the Bus Connected to APORT0Y is in Conflict With Another Peripheral

pub fn aport1xconflict(&self) -> APORT1XCONFLICT_R

Bit 2 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport1yconflict(&self) -> APORT1YCONFLICT_R

Bit 3 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport2xconflict(&self) -> APORT2XCONFLICT_R

Bit 4 - 1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral

pub fn aport2yconflict(&self) -> APORT2YCONFLICT_R

Bit 5 - 1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral

pub fn aport3xconflict(&self) -> APORT3XCONFLICT_R

Bit 6 - 1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral

pub fn aport3yconflict(&self) -> APORT3YCONFLICT_R

Bit 7 - 1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral

pub fn aport4xconflict(&self) -> APORT4XCONFLICT_R

Bit 8 - 1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral

pub fn aport4yconflict(&self) -> APORT4YCONFLICT_R

Bit 9 - 1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral

impl R<u8, HYST_A>

pub fn variant(&self) -> HYST_A

Get enumerated values variant

pub fn is_hyst0(&self) -> bool

Checks if the value of the field is HYST0

pub fn is_hyst1(&self) -> bool

Checks if the value of the field is HYST1

pub fn is_hyst2(&self) -> bool

Checks if the value of the field is HYST2

pub fn is_hyst3(&self) -> bool

Checks if the value of the field is HYST3

pub fn is_hyst4(&self) -> bool

Checks if the value of the field is HYST4

pub fn is_hyst5(&self) -> bool

Checks if the value of the field is HYST5

pub fn is_hyst6(&self) -> bool

Checks if the value of the field is HYST6

pub fn is_hyst7(&self) -> bool

Checks if the value of the field is HYST7

pub fn is_hyst8(&self) -> bool

Checks if the value of the field is HYST8

pub fn is_hyst9(&self) -> bool

Checks if the value of the field is HYST9

pub fn is_hyst10(&self) -> bool

Checks if the value of the field is HYST10

pub fn is_hyst11(&self) -> bool

Checks if the value of the field is HYST11

pub fn is_hyst12(&self) -> bool

Checks if the value of the field is HYST12

pub fn is_hyst13(&self) -> bool

Checks if the value of the field is HYST13

pub fn is_hyst14(&self) -> bool

Checks if the value of the field is HYST14

pub fn is_hyst15(&self) -> bool

Checks if the value of the field is HYST15

impl R<u32, Reg<u32, _HYSTERESIS0>>

pub fn hyst(&self) -> HYST_R

Bits 0:3 - Hysteresis Select When ACMPOUT=0

pub fn divva(&self) -> DIVVA_R

Bits 16:21 - Divider for VA Voltage When ACMPOUT=0

pub fn divvb(&self) -> DIVVB_R

Bits 24:29 - Divider for VB Voltage When ACMPOUT=0

impl R<u8, HYST_A>

pub fn variant(&self) -> HYST_A

Get enumerated values variant

pub fn is_hyst0(&self) -> bool

Checks if the value of the field is HYST0

pub fn is_hyst1(&self) -> bool

Checks if the value of the field is HYST1

pub fn is_hyst2(&self) -> bool

Checks if the value of the field is HYST2

pub fn is_hyst3(&self) -> bool

Checks if the value of the field is HYST3

pub fn is_hyst4(&self) -> bool

Checks if the value of the field is HYST4

pub fn is_hyst5(&self) -> bool

Checks if the value of the field is HYST5

pub fn is_hyst6(&self) -> bool

Checks if the value of the field is HYST6

pub fn is_hyst7(&self) -> bool

Checks if the value of the field is HYST7

pub fn is_hyst8(&self) -> bool

Checks if the value of the field is HYST8

pub fn is_hyst9(&self) -> bool

Checks if the value of the field is HYST9

pub fn is_hyst10(&self) -> bool

Checks if the value of the field is HYST10

pub fn is_hyst11(&self) -> bool

Checks if the value of the field is HYST11

pub fn is_hyst12(&self) -> bool

Checks if the value of the field is HYST12

pub fn is_hyst13(&self) -> bool

Checks if the value of the field is HYST13

pub fn is_hyst14(&self) -> bool

Checks if the value of the field is HYST14

pub fn is_hyst15(&self) -> bool

Checks if the value of the field is HYST15

impl R<u32, Reg<u32, _HYSTERESIS1>>

pub fn hyst(&self) -> HYST_R

Bits 0:3 - Hysteresis Select When ACMPOUT=1

pub fn divva(&self) -> DIVVA_R

Bits 16:21 - Divider for VA Voltage When ACMPOUT=1

pub fn divvb(&self) -> DIVVB_R

Bits 24:29 - Divider for VB Voltage When ACMPOUT=1

impl R<u32, Reg<u32, _ROUTEPEN>>

pub fn outpen(&self) -> OUTPEN_R

Bit 0 - ACMP Output Pin Enable

impl R<u8, OUTLOC_A>

pub fn variant(&self) -> Variant<u8, OUTLOC_A>

Get enumerated values variant

pub fn is_loc0(&self) -> bool

Checks if the value of the field is LOC0

pub fn is_loc1(&self) -> bool

Checks if the value of the field is LOC1

pub fn is_loc2(&self) -> bool

Checks if the value of the field is LOC2

pub fn is_loc3(&self) -> bool

Checks if the value of the field is LOC3

pub fn is_loc4(&self) -> bool

Checks if the value of the field is LOC4

pub fn is_loc5(&self) -> bool

Checks if the value of the field is LOC5

pub fn is_loc6(&self) -> bool

Checks if the value of the field is LOC6

pub fn is_loc7(&self) -> bool

Checks if the value of the field is LOC7

impl R<u32, Reg<u32, _ROUTELOC0>>

pub fn outloc(&self) -> OUTLOC_R

Bits 0:5 - I/O Location

impl R<u8, APORTSEL_A>

pub fn variant(&self) -> Variant<u8, APORTSEL_A>

Get enumerated values variant

pub fn is_aport0x(&self) -> bool

Checks if the value of the field is APORT0X

pub fn is_aport0y(&self) -> bool

Checks if the value of the field is APORT0Y

pub fn is_aport1x(&self) -> bool

Checks if the value of the field is APORT1X

pub fn is_aport1y(&self) -> bool

Checks if the value of the field is APORT1Y

pub fn is_aport1xy(&self) -> bool

Checks if the value of the field is APORT1XY

pub fn is_aport2x(&self) -> bool

Checks if the value of the field is APORT2X

pub fn is_aport2y(&self) -> bool

Checks if the value of the field is APORT2Y

pub fn is_aport2yx(&self) -> bool

Checks if the value of the field is APORT2YX

pub fn is_aport3x(&self) -> bool

Checks if the value of the field is APORT3X

pub fn is_aport3y(&self) -> bool

Checks if the value of the field is APORT3Y

pub fn is_aport3xy(&self) -> bool

Checks if the value of the field is APORT3XY

pub fn is_aport4x(&self) -> bool

Checks if the value of the field is APORT4X

pub fn is_aport4y(&self) -> bool

Checks if the value of the field is APORT4Y

pub fn is_aport4yx(&self) -> bool

Checks if the value of the field is APORT4YX

impl R<u32, Reg<u32, _EXTIFCTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Enable External Interface

pub fn aportsel(&self) -> APORTSEL_R

Bits 4:7 - APORT Selection for External Interface

impl R<u8, REFSEL_A>

pub fn variant(&self) -> Variant<u8, REFSEL_A>

Get enumerated values variant

pub fn is_1v25ln(&self) -> bool

Checks if the value of the field is _1V25LN

pub fn is_2v5ln(&self) -> bool

Checks if the value of the field is _2V5LN

pub fn is_1v25(&self) -> bool

Checks if the value of the field is _1V25

pub fn is_2v5(&self) -> bool

Checks if the value of the field is _2V5

pub fn is_vdd(&self) -> bool

Checks if the value of the field is VDD

pub fn is_ext(&self) -> bool

Checks if the value of the field is EXT

impl R<u8, PRESC_A>

pub fn variant(&self) -> Variant<u8, PRESC_A>

Get enumerated values variant

pub fn is_nodivision(&self) -> bool

Checks if the value of the field is NODIVISION

impl R<u8, REFRESHPERIOD_A>

pub fn variant(&self) -> REFRESHPERIOD_A

Get enumerated values variant

pub fn is_8cycles(&self) -> bool

Checks if the value of the field is _8CYCLES

pub fn is_16cycles(&self) -> bool

Checks if the value of the field is _16CYCLES

pub fn is_32cycles(&self) -> bool

Checks if the value of the field is _32CYCLES

pub fn is_64cycles(&self) -> bool

Checks if the value of the field is _64CYCLES

impl R<u32, Reg<u32, _CTRL>>

pub fn diff(&self) -> DIFF_R

Bit 0 - Differential Mode

pub fn sinemode(&self) -> SINEMODE_R

Bit 4 - Sine Mode

pub fn outenprs(&self) -> OUTENPRS_R

Bit 5 - PRS Controlled Output Enable

pub fn ch0prescrst(&self) -> CH0PRESCRST_R

Bit 6 - Channel 0 Start Reset Prescaler

pub fn refsel(&self) -> REFSEL_R

Bits 8:10 - Reference Selection

pub fn presc(&self) -> PRESC_R

Bits 16:22 - Prescaler Setting for DAC Clock

pub fn refreshperiod(&self) -> REFRESHPERIOD_R

Bits 24:25 - Refresh Period

pub fn warmupmode(&self) -> WARMUPMODE_R

Bit 28 - Warm-up Mode

pub fn dacclkmode(&self) -> DACCLKMODE_R

Bit 31 - Clock Mode

impl R<u32, Reg<u32, _STATUS>>

pub fn ch0ens(&self) -> CH0ENS_R

Bit 0 - Channel 0 Enabled Status

pub fn ch1ens(&self) -> CH1ENS_R

Bit 1 - Channel 1 Enabled Status

pub fn ch0bl(&self) -> CH0BL_R

Bit 2 - Channel 0 Buffer Level

pub fn ch1bl(&self) -> CH1BL_R

Bit 3 - Channel 1 Buffer Level

pub fn ch0warm(&self) -> CH0WARM_R

Bit 4 - Channel 0 Warm

pub fn ch1warm(&self) -> CH1WARM_R

Bit 5 - Channel 1 Warm

pub fn opa0aportconflict(&self) -> OPA0APORTCONFLICT_R

Bit 16 - OPA0 Bus Conflict Output

pub fn opa1aportconflict(&self) -> OPA1APORTCONFLICT_R

Bit 17 - OPA1 Bus Conflict Output

pub fn opa2aportconflict(&self) -> OPA2APORTCONFLICT_R

Bit 18 - OPA2 Bus Conflict Output

pub fn opa3aportconflict(&self) -> OPA3APORTCONFLICT_R

Bit 19 - OPA3 Bus Conflict Output

pub fn opa0ens(&self) -> OPA0ENS_R

Bit 20 - OPA0 Enabled Status

pub fn opa1ens(&self) -> OPA1ENS_R

Bit 21 - OPA1 Enabled Status

pub fn opa2ens(&self) -> OPA2ENS_R

Bit 22 - OPA2 Enabled Status

pub fn opa3ens(&self) -> OPA3ENS_R

Bit 23 - OPA3 Enabled Status

pub fn opa0warm(&self) -> OPA0WARM_R

Bit 24 - OPA0 Warm Status

pub fn opa1warm(&self) -> OPA1WARM_R

Bit 25 - OPA1 Warm Status

pub fn opa2warm(&self) -> OPA2WARM_R

Bit 26 - OPA2 Warm Status

pub fn opa3warm(&self) -> OPA3WARM_R

Bit 27 - OPA3 Warm Status

pub fn opa0outvalid(&self) -> OPA0OUTVALID_R

Bit 28 - OPA0 Output Valid Status

pub fn opa1outvalid(&self) -> OPA1OUTVALID_R

Bit 29 - OPA1 Output Valid Status

pub fn opa2outvalid(&self) -> OPA2OUTVALID_R

Bit 30 - OPA2 Output Valid Status

pub fn opa3outvalid(&self) -> OPA3OUTVALID_R

Bit 31 - OPA3 Output Valid Status

impl R<u8, TRIGMODE_A>

pub fn variant(&self) -> Variant<u8, TRIGMODE_A>

Get enumerated values variant

pub fn is_sw(&self) -> bool

Checks if the value of the field is SW

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_refresh(&self) -> bool

Checks if the value of the field is REFRESH

pub fn is_swprs(&self) -> bool

Checks if the value of the field is SWPRS

pub fn is_swrefresh(&self) -> bool

Checks if the value of the field is SWREFRESH

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _CH0CTRL>>

pub fn convmode(&self) -> CONVMODE_R

Bit 0 - Conversion Mode

pub fn trigmode(&self) -> TRIGMODE_R

Bits 4:6 - Channel 0 Trigger Mode

pub fn prsasync(&self) -> PRSASYNC_R

Bit 8 - Channel 0 PRS Asynchronous Enable

pub fn prssel(&self) -> PRSSEL_R

Bits 12:16 - Channel 0 PRS Trigger Select

impl R<u8, TRIGMODE_A>

pub fn variant(&self) -> Variant<u8, TRIGMODE_A>

Get enumerated values variant

pub fn is_sw(&self) -> bool

Checks if the value of the field is SW

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_refresh(&self) -> bool

Checks if the value of the field is REFRESH

pub fn is_swprs(&self) -> bool

Checks if the value of the field is SWPRS

pub fn is_swrefresh(&self) -> bool

Checks if the value of the field is SWREFRESH

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _CH1CTRL>>

pub fn convmode(&self) -> CONVMODE_R

Bit 0 - Conversion Mode

pub fn trigmode(&self) -> TRIGMODE_R

Bits 4:6 - Channel 1 Trigger Mode

pub fn prsasync(&self) -> PRSASYNC_R

Bit 8 - Channel 1 PRS Asynchronous Enable

pub fn prssel(&self) -> PRSSEL_R

Bits 12:16 - Channel 1 PRS Trigger Select

impl R<u32, Reg<u32, _IF>>

pub fn ch0cd(&self) -> CH0CD_R

Bit 0 - Channel 0 Conversion Done Interrupt Flag

pub fn ch1cd(&self) -> CH1CD_R

Bit 1 - Channel 1 Conversion Done Interrupt Flag

pub fn ch0of(&self) -> CH0OF_R

Bit 2 - Channel 0 Data Overflow Interrupt Flag

pub fn ch1of(&self) -> CH1OF_R

Bit 3 - Channel 1 Data Overflow Interrupt Flag

pub fn ch0uf(&self) -> CH0UF_R

Bit 4 - Channel 0 Data Underflow Interrupt Flag

pub fn ch1uf(&self) -> CH1UF_R

Bit 5 - Channel 1 Data Underflow Interrupt Flag

pub fn ch0bl(&self) -> CH0BL_R

Bit 6 - Channel 0 Buffer Level Interrupt Flag

pub fn ch1bl(&self) -> CH1BL_R

Bit 7 - Channel 1 Buffer Level Interrupt Flag

pub fn em23err(&self) -> EM23ERR_R

Bit 15 - EM2/3 Entry Error Flag

pub fn opa0aportconflict(&self) -> OPA0APORTCONFLICT_R

Bit 16 - OPA0 Bus Conflict Output Interrupt Flag

pub fn opa1aportconflict(&self) -> OPA1APORTCONFLICT_R

Bit 17 - OPA1 Bus Conflict Output Interrupt Flag

pub fn opa2aportconflict(&self) -> OPA2APORTCONFLICT_R

Bit 18 - OPA2 Bus Conflict Output Interrupt Flag

pub fn opa3aportconflict(&self) -> OPA3APORTCONFLICT_R

Bit 19 - OPA3 Bus Conflict Output Interrupt Flag

pub fn opa0prstimederr(&self) -> OPA0PRSTIMEDERR_R

Bit 20 - OPA0 PRS Trigger Mode Error Interrupt Flag

pub fn opa1prstimederr(&self) -> OPA1PRSTIMEDERR_R

Bit 21 - OPA1 PRS Trigger Mode Error Interrupt Flag

pub fn opa2prstimederr(&self) -> OPA2PRSTIMEDERR_R

Bit 22 - OPA2 PRS Trigger Mode Error Interrupt Flag

pub fn opa3prstimederr(&self) -> OPA3PRSTIMEDERR_R

Bit 23 - OPA3 PRS Trigger Mode Error Interrupt Flag

pub fn opa0outvalid(&self) -> OPA0OUTVALID_R

Bit 28 - OPA0 Output Valid Interrupt Flag

pub fn opa1outvalid(&self) -> OPA1OUTVALID_R

Bit 29 - OPA1 Output Valid Interrupt Flag

pub fn opa2outvalid(&self) -> OPA2OUTVALID_R

Bit 30 - OPA3 Output Valid Interrupt Flag

pub fn opa3outvalid(&self) -> OPA3OUTVALID_R

Bit 31 - OPA3 Output Valid Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn ch0cd(&self) -> CH0CD_R

Bit 0 - CH0CD Interrupt Enable

pub fn ch1cd(&self) -> CH1CD_R

Bit 1 - CH1CD Interrupt Enable

pub fn ch0of(&self) -> CH0OF_R

Bit 2 - CH0OF Interrupt Enable

pub fn ch1of(&self) -> CH1OF_R

Bit 3 - CH1OF Interrupt Enable

pub fn ch0uf(&self) -> CH0UF_R

Bit 4 - CH0UF Interrupt Enable

pub fn ch1uf(&self) -> CH1UF_R

Bit 5 - CH1UF Interrupt Enable

pub fn ch0bl(&self) -> CH0BL_R

Bit 6 - CH0BL Interrupt Enable

pub fn ch1bl(&self) -> CH1BL_R

Bit 7 - CH1BL Interrupt Enable

pub fn em23err(&self) -> EM23ERR_R

Bit 15 - EM23ERR Interrupt Enable

pub fn opa0aportconflict(&self) -> OPA0APORTCONFLICT_R

Bit 16 - OPA0APORTCONFLICT Interrupt Enable

pub fn opa1aportconflict(&self) -> OPA1APORTCONFLICT_R

Bit 17 - OPA1APORTCONFLICT Interrupt Enable

pub fn opa2aportconflict(&self) -> OPA2APORTCONFLICT_R

Bit 18 - OPA2APORTCONFLICT Interrupt Enable

pub fn opa3aportconflict(&self) -> OPA3APORTCONFLICT_R

Bit 19 - OPA3APORTCONFLICT Interrupt Enable

pub fn opa0prstimederr(&self) -> OPA0PRSTIMEDERR_R

Bit 20 - OPA0PRSTIMEDERR Interrupt Enable

pub fn opa1prstimederr(&self) -> OPA1PRSTIMEDERR_R

Bit 21 - OPA1PRSTIMEDERR Interrupt Enable

pub fn opa2prstimederr(&self) -> OPA2PRSTIMEDERR_R

Bit 22 - OPA2PRSTIMEDERR Interrupt Enable

pub fn opa3prstimederr(&self) -> OPA3PRSTIMEDERR_R

Bit 23 - OPA3PRSTIMEDERR Interrupt Enable

pub fn opa0outvalid(&self) -> OPA0OUTVALID_R

Bit 28 - OPA0OUTVALID Interrupt Enable

pub fn opa1outvalid(&self) -> OPA1OUTVALID_R

Bit 29 - OPA1OUTVALID Interrupt Enable

pub fn opa2outvalid(&self) -> OPA2OUTVALID_R

Bit 30 - OPA2OUTVALID Interrupt Enable

pub fn opa3outvalid(&self) -> OPA3OUTVALID_R

Bit 31 - OPA3OUTVALID Interrupt Enable

impl R<u32, Reg<u32, _CH0DATA>>

pub fn data(&self) -> DATA_R

Bits 0:11 - Channel 0 Data

impl R<u32, Reg<u32, _CH1DATA>>

pub fn data(&self) -> DATA_R

Bits 0:11 - Channel 1 Data

impl R<u32, Reg<u32, _COMBDATA>>

pub fn ch0data(&self) -> CH0DATA_R

Bits 0:11 - Channel 0 Data

pub fn ch1data(&self) -> CH1DATA_R

Bits 16:27 - Channel 1 Data

impl R<u32, Reg<u32, _CAL>>

pub fn offsettrim(&self) -> OFFSETTRIM_R

Bits 0:2 - Input Buffer Offset Calibration Value

pub fn gainerrtrim(&self) -> GAINERRTRIM_R

Bits 8:13 - Gain Error Trim Value

pub fn gainerrtrimch1(&self) -> GAINERRTRIMCH1_R

Bits 16:19 - Gain Error Trim Value for CH1

impl R<u32, Reg<u32, _OPA0_APORTREQ>>

pub fn aport1xreq(&self) -> APORT1XREQ_R

Bit 2 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport1yreq(&self) -> APORT1YREQ_R

Bit 3 - 1 If the Bus Connected to APORT1X is Requested

pub fn aport2xreq(&self) -> APORT2XREQ_R

Bit 4 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport2yreq(&self) -> APORT2YREQ_R

Bit 5 - 1 If the Bus Connected to APORT2Y is Requested

pub fn aport3xreq(&self) -> APORT3XREQ_R

Bit 6 - 1 If the Bus Connected to APORT3X is Requested

pub fn aport3yreq(&self) -> APORT3YREQ_R

Bit 7 - 1 If the Bus Connected to APORT3Y is Requested

pub fn aport4xreq(&self) -> APORT4XREQ_R

Bit 8 - 1 If the Bus Connected to APORT4X is Requested

pub fn aport4yreq(&self) -> APORT4YREQ_R

Bit 9 - 1 If the Bus Connected to APORT4Y is Requested

impl R<u32, Reg<u32, _OPA0_APORTCONFLICT>>

pub fn aport1xconflict(&self) -> APORT1XCONFLICT_R

Bit 2 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport1yconflict(&self) -> APORT1YCONFLICT_R

Bit 3 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport2xconflict(&self) -> APORT2XCONFLICT_R

Bit 4 - 1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral

pub fn aport2yconflict(&self) -> APORT2YCONFLICT_R

Bit 5 - 1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral

pub fn aport3xconflict(&self) -> APORT3XCONFLICT_R

Bit 6 - 1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral

pub fn aport3yconflict(&self) -> APORT3YCONFLICT_R

Bit 7 - 1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral

pub fn aport4xconflict(&self) -> APORT4XCONFLICT_R

Bit 8 - 1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral

pub fn aport4yconflict(&self) -> APORT4YCONFLICT_R

Bit 9 - 1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral

impl R<u8, DRIVESTRENGTH_A>

pub fn variant(&self) -> DRIVESTRENGTH_A

Get enumerated values variant

pub fn is_0(&self) -> bool

Checks if the value of the field is _0

pub fn is_1(&self) -> bool

Checks if the value of the field is _1

pub fn is_2(&self) -> bool

Checks if the value of the field is _2

pub fn is_3(&self) -> bool

Checks if the value of the field is _3

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _OPA0_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bits 0:1 - OPAx Operation Mode

pub fn incbw(&self) -> INCBW_R

Bit 2 - OPAx Unity Gain Bandwidth Scale

pub fn hcmdis(&self) -> HCMDIS_R

Bit 3 - High Common Mode Disable

pub fn outscale(&self) -> OUTSCALE_R

Bit 4 - Scale OPAx Output Driving Strength

pub fn prsen(&self) -> PRSEN_R

Bit 8 - OPAx PRS Trigger Enable

pub fn prsmode(&self) -> PRSMODE_R

Bit 9 - OPAx PRS Trigger Mode

pub fn prssel(&self) -> PRSSEL_R

Bits 10:14 - OPAx PRS Trigger Select

pub fn prsoutmode(&self) -> PRSOUTMODE_R

Bit 16 - OPAx PRS Output Select

pub fn aportxmasterdis(&self) -> APORTXMASTERDIS_R

Bit 20 - APORT Bus Master Disable

pub fn aportymasterdis(&self) -> APORTYMASTERDIS_R

Bit 21 - APORT Bus Master Disable

impl R<u32, Reg<u32, _OPA0_TIMER>>

pub fn startupdly(&self) -> STARTUPDLY_R

Bits 0:5 - OPAx Startup Delay Count Value

pub fn warmuptime(&self) -> WARMUPTIME_R

Bits 8:14 - OPAx Warmup Time Count Value

pub fn settletime(&self) -> SETTLETIME_R

Bits 16:25 - OPAx Output Settling Timeout Value

impl R<u8, RESINMUX_A>

pub fn variant(&self) -> Variant<u8, RESINMUX_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_opanext(&self) -> bool

Checks if the value of the field is OPANEXT

pub fn is_negpad(&self) -> bool

Checks if the value of the field is NEGPAD

pub fn is_pospad(&self) -> bool

Checks if the value of the field is POSPAD

pub fn is_compad(&self) -> bool

Checks if the value of the field is COMPAD

pub fn is_center(&self) -> bool

Checks if the value of the field is CENTER

pub fn is_vss(&self) -> bool

Checks if the value of the field is VSS

impl R<u8, RESSEL_A>

pub fn variant(&self) -> RESSEL_A

Get enumerated values variant

pub fn is_res0(&self) -> bool

Checks if the value of the field is RES0

pub fn is_res1(&self) -> bool

Checks if the value of the field is RES1

pub fn is_res2(&self) -> bool

Checks if the value of the field is RES2

pub fn is_res3(&self) -> bool

Checks if the value of the field is RES3

pub fn is_res4(&self) -> bool

Checks if the value of the field is RES4

pub fn is_res5(&self) -> bool

Checks if the value of the field is RES5

pub fn is_res6(&self) -> bool

Checks if the value of the field is RES6

pub fn is_res7(&self) -> bool

Checks if the value of the field is RES7

impl R<u32, Reg<u32, _OPA0_MUX>>

pub fn possel(&self) -> POSSEL_R

Bits 0:7 - OPAx Non-inverting Input Mux

pub fn negsel(&self) -> NEGSEL_R

Bits 8:15 - OPAx Inverting Input Mux

pub fn resinmux(&self) -> RESINMUX_R

Bits 16:18 - OPAx Resistor Ladder Input Mux

pub fn gain3x(&self) -> GAIN3X_R

Bit 20 - OPAx Dedicated 3x Gain Resistor Ladder

pub fn ressel(&self) -> RESSEL_R

Bits 24:26 - OPAx Resistor Ladder Select

impl R<u8, ALTOUTPADEN_A>

pub fn variant(&self) -> Variant<u8, ALTOUTPADEN_A>

Get enumerated values variant

pub fn is_out0(&self) -> bool

Checks if the value of the field is OUT0

pub fn is_out1(&self) -> bool

Checks if the value of the field is OUT1

pub fn is_out2(&self) -> bool

Checks if the value of the field is OUT2

pub fn is_out3(&self) -> bool

Checks if the value of the field is OUT3

pub fn is_out4(&self) -> bool

Checks if the value of the field is OUT4

impl R<u32, Reg<u32, _OPA0_OUT>>

pub fn mainouten(&self) -> MAINOUTEN_R

Bit 0 - OPAx Main Output Enable

pub fn altouten(&self) -> ALTOUTEN_R

Bit 1 - OPAx Alternative Output Enable

pub fn aportouten(&self) -> APORTOUTEN_R

Bit 2 - OPAx Aport Output Enable

pub fn short(&self) -> SHORT_R

Bit 3 - OPAx Main and Alternative Output Short

pub fn altoutpaden(&self) -> ALTOUTPADEN_R

Bits 4:8 - OPAx Output Enable Value

pub fn aportoutsel(&self) -> APORTOUTSEL_R

Bits 16:23 - OPAx APORT Output

impl R<u32, Reg<u32, _OPA0_CAL>>

pub fn cm1(&self) -> CM1_R

Bits 0:3 - Compensation Cap Cm1 Trim Value

pub fn cm2(&self) -> CM2_R

Bits 5:8 - Compensation Cap Cm2 Trim Value

pub fn cm3(&self) -> CM3_R

Bits 10:11 - Compensation Cap Cm3 Trim Value

pub fn gm(&self) -> GM_R

Bits 13:15 - Gm Trim Value

pub fn gm3(&self) -> GM3_R

Bits 17:18 - Gm3 Trim Value

pub fn offsetp(&self) -> OFFSETP_R

Bits 20:24 - OPAx Non-Inverting Input Offset Configuration Value

pub fn offsetn(&self) -> OFFSETN_R

Bits 26:30 - OPAx Inverting Input Offset Configuration Value

impl R<u32, Reg<u32, _OPA1_APORTREQ>>

pub fn aport1xreq(&self) -> APORT1XREQ_R

Bit 2 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport1yreq(&self) -> APORT1YREQ_R

Bit 3 - 1 If the Bus Connected to APORT1X is Requested

pub fn aport2xreq(&self) -> APORT2XREQ_R

Bit 4 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport2yreq(&self) -> APORT2YREQ_R

Bit 5 - 1 If the Bus Connected to APORT2Y is Requested

pub fn aport3xreq(&self) -> APORT3XREQ_R

Bit 6 - 1 If the Bus Connected to APORT3X is Requested

pub fn aport3yreq(&self) -> APORT3YREQ_R

Bit 7 - 1 If the Bus Connected to APORT3Y is Requested

pub fn aport4xreq(&self) -> APORT4XREQ_R

Bit 8 - 1 If the Bus Connected to APORT4X is Requested

pub fn aport4yreq(&self) -> APORT4YREQ_R

Bit 9 - 1 If the Bus Connected to APORT4Y is Requested

impl R<u32, Reg<u32, _OPA1_APORTCONFLICT>>

pub fn aport1xconflict(&self) -> APORT1XCONFLICT_R

Bit 2 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport1yconflict(&self) -> APORT1YCONFLICT_R

Bit 3 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport2xconflict(&self) -> APORT2XCONFLICT_R

Bit 4 - 1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral

pub fn aport2yconflict(&self) -> APORT2YCONFLICT_R

Bit 5 - 1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral

pub fn aport3xconflict(&self) -> APORT3XCONFLICT_R

Bit 6 - 1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral

pub fn aport3yconflict(&self) -> APORT3YCONFLICT_R

Bit 7 - 1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral

pub fn aport4xconflict(&self) -> APORT4XCONFLICT_R

Bit 8 - 1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral

pub fn aport4yconflict(&self) -> APORT4YCONFLICT_R

Bit 9 - 1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral

impl R<u8, DRIVESTRENGTH_A>

pub fn variant(&self) -> DRIVESTRENGTH_A

Get enumerated values variant

pub fn is_0(&self) -> bool

Checks if the value of the field is _0

pub fn is_1(&self) -> bool

Checks if the value of the field is _1

pub fn is_2(&self) -> bool

Checks if the value of the field is _2

pub fn is_3(&self) -> bool

Checks if the value of the field is _3

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _OPA1_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bits 0:1 - OPAx Operation Mode

pub fn incbw(&self) -> INCBW_R

Bit 2 - OPAx Unity Gain Bandwidth Scale

pub fn hcmdis(&self) -> HCMDIS_R

Bit 3 - High Common Mode Disable

pub fn outscale(&self) -> OUTSCALE_R

Bit 4 - Scale OPAx Output Driving Strength

pub fn prsen(&self) -> PRSEN_R

Bit 8 - OPAx PRS Trigger Enable

pub fn prsmode(&self) -> PRSMODE_R

Bit 9 - OPAx PRS Trigger Mode

pub fn prssel(&self) -> PRSSEL_R

Bits 10:14 - OPAx PRS Trigger Select

pub fn prsoutmode(&self) -> PRSOUTMODE_R

Bit 16 - OPAx PRS Output Select

pub fn aportxmasterdis(&self) -> APORTXMASTERDIS_R

Bit 20 - APORT Bus Master Disable

pub fn aportymasterdis(&self) -> APORTYMASTERDIS_R

Bit 21 - APORT Bus Master Disable

impl R<u32, Reg<u32, _OPA1_TIMER>>

pub fn startupdly(&self) -> STARTUPDLY_R

Bits 0:5 - OPAx Startup Delay Count Value

pub fn warmuptime(&self) -> WARMUPTIME_R

Bits 8:14 - OPAx Warmup Time Count Value

pub fn settletime(&self) -> SETTLETIME_R

Bits 16:25 - OPAx Output Settling Timeout Value

impl R<u8, RESINMUX_A>

pub fn variant(&self) -> Variant<u8, RESINMUX_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_opanext(&self) -> bool

Checks if the value of the field is OPANEXT

pub fn is_negpad(&self) -> bool

Checks if the value of the field is NEGPAD

pub fn is_pospad(&self) -> bool

Checks if the value of the field is POSPAD

pub fn is_compad(&self) -> bool

Checks if the value of the field is COMPAD

pub fn is_center(&self) -> bool

Checks if the value of the field is CENTER

pub fn is_vss(&self) -> bool

Checks if the value of the field is VSS

impl R<u8, RESSEL_A>

pub fn variant(&self) -> RESSEL_A

Get enumerated values variant

pub fn is_res0(&self) -> bool

Checks if the value of the field is RES0

pub fn is_res1(&self) -> bool

Checks if the value of the field is RES1

pub fn is_res2(&self) -> bool

Checks if the value of the field is RES2

pub fn is_res3(&self) -> bool

Checks if the value of the field is RES3

pub fn is_res4(&self) -> bool

Checks if the value of the field is RES4

pub fn is_res5(&self) -> bool

Checks if the value of the field is RES5

pub fn is_res6(&self) -> bool

Checks if the value of the field is RES6

pub fn is_res7(&self) -> bool

Checks if the value of the field is RES7

impl R<u32, Reg<u32, _OPA1_MUX>>

pub fn possel(&self) -> POSSEL_R

Bits 0:7 - OPAx Non-inverting Input Mux

pub fn negsel(&self) -> NEGSEL_R

Bits 8:15 - OPAx Inverting Input Mux

pub fn resinmux(&self) -> RESINMUX_R

Bits 16:18 - OPAx Resistor Ladder Input Mux

pub fn gain3x(&self) -> GAIN3X_R

Bit 20 - OPAx Dedicated 3x Gain Resistor Ladder

pub fn ressel(&self) -> RESSEL_R

Bits 24:26 - OPAx Resistor Ladder Select

impl R<u8, ALTOUTPADEN_A>

pub fn variant(&self) -> Variant<u8, ALTOUTPADEN_A>

Get enumerated values variant

pub fn is_out0(&self) -> bool

Checks if the value of the field is OUT0

pub fn is_out1(&self) -> bool

Checks if the value of the field is OUT1

pub fn is_out2(&self) -> bool

Checks if the value of the field is OUT2

pub fn is_out3(&self) -> bool

Checks if the value of the field is OUT3

pub fn is_out4(&self) -> bool

Checks if the value of the field is OUT4

impl R<u32, Reg<u32, _OPA1_OUT>>

pub fn mainouten(&self) -> MAINOUTEN_R

Bit 0 - OPAx Main Output Enable

pub fn altouten(&self) -> ALTOUTEN_R

Bit 1 - OPAx Alternative Output Enable

pub fn aportouten(&self) -> APORTOUTEN_R

Bit 2 - OPAx Aport Output Enable

pub fn short(&self) -> SHORT_R

Bit 3 - OPAx Main and Alternative Output Short

pub fn altoutpaden(&self) -> ALTOUTPADEN_R

Bits 4:8 - OPAx Output Enable Value

pub fn aportoutsel(&self) -> APORTOUTSEL_R

Bits 16:23 - OPAx APORT Output

impl R<u32, Reg<u32, _OPA1_CAL>>

pub fn cm1(&self) -> CM1_R

Bits 0:3 - Compensation Cap Cm1 Trim Value

pub fn cm2(&self) -> CM2_R

Bits 5:8 - Compensation Cap Cm2 Trim Value

pub fn cm3(&self) -> CM3_R

Bits 10:11 - Compensation Cap Cm3 Trim Value

pub fn gm(&self) -> GM_R

Bits 13:15 - Gm Trim Value

pub fn gm3(&self) -> GM3_R

Bits 17:18 - Gm3 Trim Value

pub fn offsetp(&self) -> OFFSETP_R

Bits 20:24 - OPAx Non-Inverting Input Offset Configuration Value

pub fn offsetn(&self) -> OFFSETN_R

Bits 26:30 - OPAx Inverting Input Offset Configuration Value

impl R<u32, Reg<u32, _OPA2_APORTREQ>>

pub fn aport1xreq(&self) -> APORT1XREQ_R

Bit 2 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport1yreq(&self) -> APORT1YREQ_R

Bit 3 - 1 If the Bus Connected to APORT1X is Requested

pub fn aport2xreq(&self) -> APORT2XREQ_R

Bit 4 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport2yreq(&self) -> APORT2YREQ_R

Bit 5 - 1 If the Bus Connected to APORT2Y is Requested

pub fn aport3xreq(&self) -> APORT3XREQ_R

Bit 6 - 1 If the Bus Connected to APORT3X is Requested

pub fn aport3yreq(&self) -> APORT3YREQ_R

Bit 7 - 1 If the Bus Connected to APORT3Y is Requested

pub fn aport4xreq(&self) -> APORT4XREQ_R

Bit 8 - 1 If the Bus Connected to APORT4X is Requested

pub fn aport4yreq(&self) -> APORT4YREQ_R

Bit 9 - 1 If the Bus Connected to APORT4Y is Requested

impl R<u32, Reg<u32, _OPA2_APORTCONFLICT>>

pub fn aport1xconflict(&self) -> APORT1XCONFLICT_R

Bit 2 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport1yconflict(&self) -> APORT1YCONFLICT_R

Bit 3 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport2xconflict(&self) -> APORT2XCONFLICT_R

Bit 4 - 1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral

pub fn aport2yconflict(&self) -> APORT2YCONFLICT_R

Bit 5 - 1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral

pub fn aport3xconflict(&self) -> APORT3XCONFLICT_R

Bit 6 - 1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral

pub fn aport3yconflict(&self) -> APORT3YCONFLICT_R

Bit 7 - 1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral

pub fn aport4xconflict(&self) -> APORT4XCONFLICT_R

Bit 8 - 1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral

pub fn aport4yconflict(&self) -> APORT4YCONFLICT_R

Bit 9 - 1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral

impl R<u8, DRIVESTRENGTH_A>

pub fn variant(&self) -> DRIVESTRENGTH_A

Get enumerated values variant

pub fn is_0(&self) -> bool

Checks if the value of the field is _0

pub fn is_1(&self) -> bool

Checks if the value of the field is _1

pub fn is_2(&self) -> bool

Checks if the value of the field is _2

pub fn is_3(&self) -> bool

Checks if the value of the field is _3

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _OPA2_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bits 0:1 - OPAx Operation Mode

pub fn incbw(&self) -> INCBW_R

Bit 2 - OPAx Unity Gain Bandwidth Scale

pub fn hcmdis(&self) -> HCMDIS_R

Bit 3 - High Common Mode Disable

pub fn outscale(&self) -> OUTSCALE_R

Bit 4 - Scale OPAx Output Driving Strength

pub fn prsen(&self) -> PRSEN_R

Bit 8 - OPAx PRS Trigger Enable

pub fn prsmode(&self) -> PRSMODE_R

Bit 9 - OPAx PRS Trigger Mode

pub fn prssel(&self) -> PRSSEL_R

Bits 10:14 - OPAx PRS Trigger Select

pub fn prsoutmode(&self) -> PRSOUTMODE_R

Bit 16 - OPAx PRS Output Select

pub fn aportxmasterdis(&self) -> APORTXMASTERDIS_R

Bit 20 - APORT Bus Master Disable

pub fn aportymasterdis(&self) -> APORTYMASTERDIS_R

Bit 21 - APORT Bus Master Disable

impl R<u32, Reg<u32, _OPA2_TIMER>>

pub fn startupdly(&self) -> STARTUPDLY_R

Bits 0:5 - OPAx Startup Delay Count Value

pub fn warmuptime(&self) -> WARMUPTIME_R

Bits 8:14 - OPAx Warmup Time Count Value

pub fn settletime(&self) -> SETTLETIME_R

Bits 16:25 - OPAx Output Settling Timeout Value

impl R<u8, RESINMUX_A>

pub fn variant(&self) -> Variant<u8, RESINMUX_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_opanext(&self) -> bool

Checks if the value of the field is OPANEXT

pub fn is_negpad(&self) -> bool

Checks if the value of the field is NEGPAD

pub fn is_pospad(&self) -> bool

Checks if the value of the field is POSPAD

pub fn is_compad(&self) -> bool

Checks if the value of the field is COMPAD

pub fn is_center(&self) -> bool

Checks if the value of the field is CENTER

pub fn is_vss(&self) -> bool

Checks if the value of the field is VSS

impl R<u8, RESSEL_A>

pub fn variant(&self) -> RESSEL_A

Get enumerated values variant

pub fn is_res0(&self) -> bool

Checks if the value of the field is RES0

pub fn is_res1(&self) -> bool

Checks if the value of the field is RES1

pub fn is_res2(&self) -> bool

Checks if the value of the field is RES2

pub fn is_res3(&self) -> bool

Checks if the value of the field is RES3

pub fn is_res4(&self) -> bool

Checks if the value of the field is RES4

pub fn is_res5(&self) -> bool

Checks if the value of the field is RES5

pub fn is_res6(&self) -> bool

Checks if the value of the field is RES6

pub fn is_res7(&self) -> bool

Checks if the value of the field is RES7

impl R<u32, Reg<u32, _OPA2_MUX>>

pub fn possel(&self) -> POSSEL_R

Bits 0:7 - OPAx Non-inverting Input Mux

pub fn negsel(&self) -> NEGSEL_R

Bits 8:15 - OPAx Inverting Input Mux

pub fn resinmux(&self) -> RESINMUX_R

Bits 16:18 - OPAx Resistor Ladder Input Mux

pub fn gain3x(&self) -> GAIN3X_R

Bit 20 - OPAx Dedicated 3x Gain Resistor Ladder

pub fn ressel(&self) -> RESSEL_R

Bits 24:26 - OPAx Resistor Ladder Select

impl R<u8, ALTOUTPADEN_A>

pub fn variant(&self) -> Variant<u8, ALTOUTPADEN_A>

Get enumerated values variant

pub fn is_out0(&self) -> bool

Checks if the value of the field is OUT0

pub fn is_out1(&self) -> bool

Checks if the value of the field is OUT1

pub fn is_out2(&self) -> bool

Checks if the value of the field is OUT2

pub fn is_out3(&self) -> bool

Checks if the value of the field is OUT3

pub fn is_out4(&self) -> bool

Checks if the value of the field is OUT4

impl R<u32, Reg<u32, _OPA2_OUT>>

pub fn mainouten(&self) -> MAINOUTEN_R

Bit 0 - OPAx Main Output Enable

pub fn altouten(&self) -> ALTOUTEN_R

Bit 1 - OPAx Alternative Output Enable

pub fn aportouten(&self) -> APORTOUTEN_R

Bit 2 - OPAx Aport Output Enable

pub fn short(&self) -> SHORT_R

Bit 3 - OPAx Main and Alternative Output Short

pub fn altoutpaden(&self) -> ALTOUTPADEN_R

Bits 4:8 - OPAx Output Enable Value

pub fn aportoutsel(&self) -> APORTOUTSEL_R

Bits 16:23 - OPAx APORT Output

impl R<u32, Reg<u32, _OPA2_CAL>>

pub fn cm1(&self) -> CM1_R

Bits 0:3 - Compensation Cap Cm1 Trim Value

pub fn cm2(&self) -> CM2_R

Bits 5:8 - Compensation Cap Cm2 Trim Value

pub fn cm3(&self) -> CM3_R

Bits 10:11 - Compensation Cap Cm3 Trim Value

pub fn gm(&self) -> GM_R

Bits 13:15 - Gm Trim Value

pub fn gm3(&self) -> GM3_R

Bits 17:18 - Gm3 Trim Value

pub fn offsetp(&self) -> OFFSETP_R

Bits 20:24 - OPAx Non-Inverting Input Offset Configuration Value

pub fn offsetn(&self) -> OFFSETN_R

Bits 26:30 - OPAx Inverting Input Offset Configuration Value

impl R<u32, Reg<u32, _OPA3_APORTREQ>>

pub fn aport1xreq(&self) -> APORT1XREQ_R

Bit 2 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport1yreq(&self) -> APORT1YREQ_R

Bit 3 - 1 If the Bus Connected to APORT1X is Requested

pub fn aport2xreq(&self) -> APORT2XREQ_R

Bit 4 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport2yreq(&self) -> APORT2YREQ_R

Bit 5 - 1 If the Bus Connected to APORT2Y is Requested

pub fn aport3xreq(&self) -> APORT3XREQ_R

Bit 6 - 1 If the Bus Connected to APORT3X is Requested

pub fn aport3yreq(&self) -> APORT3YREQ_R

Bit 7 - 1 If the Bus Connected to APORT3Y is Requested

pub fn aport4xreq(&self) -> APORT4XREQ_R

Bit 8 - 1 If the Bus Connected to APORT4X is Requested

pub fn aport4yreq(&self) -> APORT4YREQ_R

Bit 9 - 1 If the Bus Connected to APORT4Y is Requested

impl R<u32, Reg<u32, _OPA3_APORTCONFLICT>>

pub fn aport1xconflict(&self) -> APORT1XCONFLICT_R

Bit 2 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport1yconflict(&self) -> APORT1YCONFLICT_R

Bit 3 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport2xconflict(&self) -> APORT2XCONFLICT_R

Bit 4 - 1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral

pub fn aport2yconflict(&self) -> APORT2YCONFLICT_R

Bit 5 - 1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral

pub fn aport3xconflict(&self) -> APORT3XCONFLICT_R

Bit 6 - 1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral

pub fn aport3yconflict(&self) -> APORT3YCONFLICT_R

Bit 7 - 1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral

pub fn aport4xconflict(&self) -> APORT4XCONFLICT_R

Bit 8 - 1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral

pub fn aport4yconflict(&self) -> APORT4YCONFLICT_R

Bit 9 - 1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral

impl R<u8, DRIVESTRENGTH_A>

pub fn variant(&self) -> DRIVESTRENGTH_A

Get enumerated values variant

pub fn is_0(&self) -> bool

Checks if the value of the field is _0

pub fn is_1(&self) -> bool

Checks if the value of the field is _1

pub fn is_2(&self) -> bool

Checks if the value of the field is _2

pub fn is_3(&self) -> bool

Checks if the value of the field is _3

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _OPA3_CTRL>>

pub fn drivestrength(&self) -> DRIVESTRENGTH_R

Bits 0:1 - OPAx Operation Mode

pub fn incbw(&self) -> INCBW_R

Bit 2 - OPAx Unity Gain Bandwidth Scale

pub fn hcmdis(&self) -> HCMDIS_R

Bit 3 - High Common Mode Disable

pub fn outscale(&self) -> OUTSCALE_R

Bit 4 - Scale OPAx Output Driving Strength

pub fn prsen(&self) -> PRSEN_R

Bit 8 - OPAx PRS Trigger Enable

pub fn prsmode(&self) -> PRSMODE_R

Bit 9 - OPAx PRS Trigger Mode

pub fn prssel(&self) -> PRSSEL_R

Bits 10:14 - OPAx PRS Trigger Select

pub fn prsoutmode(&self) -> PRSOUTMODE_R

Bit 16 - OPAx PRS Output Select

pub fn aportxmasterdis(&self) -> APORTXMASTERDIS_R

Bit 20 - APORT Bus Master Disable

pub fn aportymasterdis(&self) -> APORTYMASTERDIS_R

Bit 21 - APORT Bus Master Disable

impl R<u32, Reg<u32, _OPA3_TIMER>>

pub fn startupdly(&self) -> STARTUPDLY_R

Bits 0:5 - OPAx Startup Delay Count Value

pub fn warmuptime(&self) -> WARMUPTIME_R

Bits 8:14 - OPAx Warmup Time Count Value

pub fn settletime(&self) -> SETTLETIME_R

Bits 16:25 - OPAx Output Settling Timeout Value

impl R<u8, RESINMUX_A>

pub fn variant(&self) -> Variant<u8, RESINMUX_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_opanext(&self) -> bool

Checks if the value of the field is OPANEXT

pub fn is_negpad(&self) -> bool

Checks if the value of the field is NEGPAD

pub fn is_pospad(&self) -> bool

Checks if the value of the field is POSPAD

pub fn is_compad(&self) -> bool

Checks if the value of the field is COMPAD

pub fn is_center(&self) -> bool

Checks if the value of the field is CENTER

pub fn is_vss(&self) -> bool

Checks if the value of the field is VSS

impl R<u8, RESSEL_A>

pub fn variant(&self) -> RESSEL_A

Get enumerated values variant

pub fn is_res0(&self) -> bool

Checks if the value of the field is RES0

pub fn is_res1(&self) -> bool

Checks if the value of the field is RES1

pub fn is_res2(&self) -> bool

Checks if the value of the field is RES2

pub fn is_res3(&self) -> bool

Checks if the value of the field is RES3

pub fn is_res4(&self) -> bool

Checks if the value of the field is RES4

pub fn is_res5(&self) -> bool

Checks if the value of the field is RES5

pub fn is_res6(&self) -> bool

Checks if the value of the field is RES6

pub fn is_res7(&self) -> bool

Checks if the value of the field is RES7

impl R<u32, Reg<u32, _OPA3_MUX>>

pub fn possel(&self) -> POSSEL_R

Bits 0:7 - OPAx Non-inverting Input Mux

pub fn negsel(&self) -> NEGSEL_R

Bits 8:15 - OPAx Inverting Input Mux

pub fn resinmux(&self) -> RESINMUX_R

Bits 16:18 - OPAx Resistor Ladder Input Mux

pub fn gain3x(&self) -> GAIN3X_R

Bit 20 - OPAx Dedicated 3x Gain Resistor Ladder

pub fn ressel(&self) -> RESSEL_R

Bits 24:26 - OPAx Resistor Ladder Select

impl R<u8, ALTOUTPADEN_A>

pub fn variant(&self) -> Variant<u8, ALTOUTPADEN_A>

Get enumerated values variant

pub fn is_out0(&self) -> bool

Checks if the value of the field is OUT0

pub fn is_out1(&self) -> bool

Checks if the value of the field is OUT1

pub fn is_out2(&self) -> bool

Checks if the value of the field is OUT2

pub fn is_out3(&self) -> bool

Checks if the value of the field is OUT3

pub fn is_out4(&self) -> bool

Checks if the value of the field is OUT4

impl R<u32, Reg<u32, _OPA3_OUT>>

pub fn mainouten(&self) -> MAINOUTEN_R

Bit 0 - OPAx Main Output Enable

pub fn altouten(&self) -> ALTOUTEN_R

Bit 1 - OPAx Alternative Output Enable

pub fn aportouten(&self) -> APORTOUTEN_R

Bit 2 - OPAx Aport Output Enable

pub fn short(&self) -> SHORT_R

Bit 3 - OPAx Main and Alternative Output Short

pub fn altoutpaden(&self) -> ALTOUTPADEN_R

Bits 4:8 - OPAx Output Enable Value

pub fn aportoutsel(&self) -> APORTOUTSEL_R

Bits 16:23 - OPAx APORT Output

impl R<u32, Reg<u32, _OPA3_CAL>>

pub fn cm1(&self) -> CM1_R

Bits 0:3 - Compensation Cap Cm1 Trim Value

pub fn cm2(&self) -> CM2_R

Bits 5:8 - Compensation Cap Cm2 Trim Value

pub fn cm3(&self) -> CM3_R

Bits 10:11 - Compensation Cap Cm3 Trim Value

pub fn gm(&self) -> GM_R

Bits 13:15 - Gm Trim Value

pub fn gm3(&self) -> GM3_R

Bits 17:18 - Gm3 Trim Value

pub fn offsetp(&self) -> OFFSETP_R

Bits 20:24 - OPAx Non-Inverting Input Offset Configuration Value

pub fn offsetn(&self) -> OFFSETN_R

Bits 26:30 - OPAx Inverting Input Offset Configuration Value

impl R<u8, LEMOSCCTRL_A>

pub fn variant(&self) -> Variant<u8, LEMOSCCTRL_A>

Get enumerated values variant

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

pub fn is_gate(&self) -> bool

Checks if the value of the field is GATE

impl R<u8, DCDEN_A>

pub fn variant(&self) -> Variant<u8, DCDEN_A>

Get enumerated values variant

pub fn is_disabled(&self) -> bool

Checks if the value of the field is DISABLED

pub fn is_timeout(&self) -> bool

Checks if the value of the field is TIMEOUT

pub fn is_enabled(&self) -> bool

Checks if the value of the field is ENABLED

impl R<u32, Reg<u32, _CTRL>>

pub fn vbusenap(&self) -> VBUSENAP_R

Bit 0 - VBUSEN Active Polarity

pub fn selfpowered(&self) -> SELFPOWERED_R

Bit 3 - PHY Power

pub fn lemoscctrl(&self) -> LEMOSCCTRL_R

Bits 4:5 - Low Energy Mode Oscillator Control

pub fn lemphyctrl(&self) -> LEMPHYCTRL_R

Bit 7 - Low Energy Mode USB PHY Control

pub fn lemidleen(&self) -> LEMIDLEEN_R

Bit 9 - Low Energy Mode on Bus Idle Enable

pub fn idcden(&self) -> IDCDEN_R

Bit 12 - ID Pull-up Enable

pub fn otgclkcdis(&self) -> OTGCLKCDIS_R

Bit 25 - OTG CLKC Disable

pub fn otgidindis(&self) -> OTGIDINDIS_R

Bit 26 - OTG ID Input Disable

pub fn otgphyctrldis(&self) -> OTGPHYCTRLDIS_R

Bit 27 - OTG Control Signals to PHY Disable

pub fn dcden(&self) -> DCDEN_R

Bits 28:29 - Data Contact Detection Enable

pub fn pden(&self) -> PDEN_R

Bit 30 - Primary Detection Enable

pub fn sden(&self) -> SDEN_R

Bit 31 - Secondary Detection Enable

impl R<u32, Reg<u32, _STATUS>>

pub fn vbusdeth(&self) -> VBUSDETH_R

Bit 0 - VBUS Detect High

pub fn lemactive(&self) -> LEMACTIVE_R

Bit 2 - Low Energy Mode Active

pub fn dcdto(&self) -> DCDTO_R

Bit 8 - Data Contact Detection Timeout

pub fn sdp(&self) -> SDP_R

Bit 9 - Standard Downstream Port Detected

pub fn cdp(&self) -> CDP_R

Bit 10 - Charging Downstream Port Detected

pub fn dcp(&self) -> DCP_R

Bit 11 - Dedicated Charging Port Detected

pub fn acafs(&self) -> ACAFS_R

Bit 12 - ACA Full Speed TypeB Device

pub fn acals(&self) -> ACALS_R

Bit 13 - ACA Low Speed TypeB Device

pub fn usbcdbusy(&self) -> USBCDBUSY_R

Bit 15 - USB Charger Detect Busy

impl R<u32, Reg<u32, _IF>>

pub fn vbusdeth(&self) -> VBUSDETH_R

Bit 0 - VBUS Detect High Interrupt Flag

pub fn vbusdetl(&self) -> VBUSDETL_R

Bit 1 - VBUS Detect Low Interrupt Flag

pub fn err(&self) -> ERR_R

Bit 8 - Detection Error Interrupt Flag

pub fn dcd(&self) -> DCD_R

Bit 9 - Data Contact Detection Complete Interrupt Flag

pub fn pd(&self) -> PD_R

Bit 10 - Primary Detection Complete Interrupt Flag

pub fn sd(&self) -> SD_R

Bit 11 - Secondary Detection Complete Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn vbusdeth(&self) -> VBUSDETH_R

Bit 0 - VBUSDETH Interrupt Enable

pub fn vbusdetl(&self) -> VBUSDETL_R

Bit 1 - VBUSDETL Interrupt Enable

pub fn err(&self) -> ERR_R

Bit 8 - ERR Interrupt Enable

pub fn dcd(&self) -> DCD_R

Bit 9 - DCD Interrupt Enable

pub fn pd(&self) -> PD_R

Bit 10 - PD Interrupt Enable

pub fn sd(&self) -> SD_R

Bit 11 - SD Interrupt Enable

impl R<u32, Reg<u32, _ROUTE>>

pub fn phypen(&self) -> PHYPEN_R

Bit 0 - USB PHY Pin Enable

pub fn vbusenpen(&self) -> VBUSENPEN_R

Bit 1 - VBUSEN Pin Enable

impl R<u32, Reg<u32, _CDCONF>>

pub fn dcdtoconf(&self) -> DCDTOCONF_R

Bits 0:9 - DCD Timeout (TDCD_TIMEOUT) Configuration

impl R<u32, Reg<u32, _DATTRIM1>>

pub fn rout(&self) -> ROUT_R

Bits 0:5 - Trim for DP and DM Output Impedance for Both FS and LS

pub fn endlypullup(&self) -> ENDLYPULLUP_R

Bit 7 - Enables Delay of Pull in TX Mode for Both FS and LS

pub fn dlypullupfs(&self) -> DLYPULLUPFS_R

Bits 8:9 - Trim for Rising Crossover Voltage in FS

pub fn vcrsfs(&self) -> VCRSFS_R

Bits 10:11 - Trim for Falling Crossover Voltage in FS

pub fn tfdmfs(&self) -> TFDMFS_R

Bits 12:13 - Trim for DM Fall Time in FS

pub fn trdmfs(&self) -> TRDMFS_R

Bits 14:15 - Trim for DM Rise Time in FS

pub fn tfdpfs(&self) -> TFDPFS_R

Bits 16:17 - Trim for DP Fall Time in FS

pub fn trdpfs(&self) -> TRDPFS_R

Bits 18:19 - Trim for DP Rise Time in FS

impl R<u32, Reg<u32, _LEMCTRL>>

pub fn timebase(&self) -> TIMEBASE_R

Bits 0:9 - Set the Number of LFC Clk Counts to Form 3ms

impl R<u32, Reg<u32, _GOTGCTL>>

pub fn sesreqscs(&self) -> SESREQSCS_R

Bit 0 - Session Request Success

pub fn sesreq(&self) -> SESREQ_R

Bit 1 - Session Request

pub fn vbvalidoven(&self) -> VBVALIDOVEN_R

Bit 2 - VBUS Valid Override Enable

pub fn vbvalidovval(&self) -> VBVALIDOVVAL_R

Bit 3 - VBUS Valid OverrideValue

pub fn avalidoven(&self) -> AVALIDOVEN_R

Bit 4 - A-Peripheral Session Valid Override Enable

pub fn avalidovval(&self) -> AVALIDOVVAL_R

Bit 5 - A-Peripheral Session Valid OverrideValue

pub fn bvalidoven(&self) -> BVALIDOVEN_R

Bit 6 - B-Peripheral Session Valid Override Enable

pub fn bvalidovval(&self) -> BVALIDOVVAL_R

Bit 7 - B-Peripheral Session Valid OverrideValue

pub fn hstnegscs(&self) -> HSTNEGSCS_R

Bit 8 - Host Negotiation Success

pub fn hnpreq(&self) -> HNPREQ_R

Bit 9 - HNP Request

pub fn hstsethnpen(&self) -> HSTSETHNPEN_R

Bit 10 - Host Set HNP Enable

pub fn devhnpen(&self) -> DEVHNPEN_R

Bit 11 - Device HNP Enabled

pub fn ehen(&self) -> EHEN_R

Bit 12 - Embedded Host Enable

pub fn dbncefltrbypass(&self) -> DBNCEFLTRBYPASS_R

Bit 15 - Debounce Filter Bypass

pub fn conidsts(&self) -> CONIDSTS_R

Bit 16 - Connector ID Status

pub fn dbnctime(&self) -> DBNCTIME_R

Bit 17 - Long/Short Debounce Time

pub fn asesvld(&self) -> ASESVLD_R

Bit 18 - A-Session Valid

pub fn bsesvld(&self) -> BSESVLD_R

Bit 19 - B-Session Valid

pub fn otgver(&self) -> OTGVER_R

Bit 20 - OTG Version

pub fn curmod(&self) -> CURMOD_R

Bit 21 - Current Mode of Operation

impl R<u32, Reg<u32, _GOTGINT>>

pub fn sesenddet(&self) -> SESENDDET_R

Bit 2 - Session End Detected

pub fn sesreqsucstschng(&self) -> SESREQSUCSTSCHNG_R

Bit 8 - Session Request Success Status Change

pub fn hstnegsucstschng(&self) -> HSTNEGSUCSTSCHNG_R

Bit 9 - Host Negotiation Success Status Change

pub fn hstnegdet(&self) -> HSTNEGDET_R

Bit 17 - Host Negotiation Detected

pub fn adevtoutchg(&self) -> ADEVTOUTCHG_R

Bit 18 - A-Device Timeout Change

pub fn dbncedone(&self) -> DBNCEDONE_R

Bit 19 - Debounce Done

impl R<u8, HBSTLEN_A>

pub fn variant(&self) -> Variant<u8, HBSTLEN_A>

Get enumerated values variant

pub fn is_single(&self) -> bool

Checks if the value of the field is SINGLE

pub fn is_incr(&self) -> bool

Checks if the value of the field is INCR

pub fn is_incr4(&self) -> bool

Checks if the value of the field is INCR4

pub fn is_incr8(&self) -> bool

Checks if the value of the field is INCR8

pub fn is_incr16(&self) -> bool

Checks if the value of the field is INCR16

impl R<u32, Reg<u32, _GAHBCFG>>

pub fn glblintrmsk(&self) -> GLBLINTRMSK_R

Bit 0 - Global Interrupt Mask

pub fn hbstlen(&self) -> HBSTLEN_R

Bits 1:4 - Burst Length/Type

pub fn dmaen(&self) -> DMAEN_R

Bit 5 - DMA Enable

pub fn nptxfemplvl(&self) -> NPTXFEMPLVL_R

Bit 7 - Non-Periodic TxFIFO Empty Level

pub fn ptxfemplvl(&self) -> PTXFEMPLVL_R

Bit 8 - Periodic TxFIFO Empty Level

pub fn remmemsupp(&self) -> REMMEMSUPP_R

Bit 21 - Remote Memory Support

pub fn notialldmawrit(&self) -> NOTIALLDMAWRIT_R

Bit 22 - Notify All Dma Write Transactions

pub fn ahbsingle(&self) -> AHBSINGLE_R

Bit 23 - AHB Single Support

impl R<u32, Reg<u32, _GUSBCFG>>

pub fn toutcal(&self) -> TOUTCAL_R

Bits 0:2 - Timeout Calibration (host and device)

pub fn fsintf(&self) -> FSINTF_R

Bit 5 - Full-Speed Serial Interface Select

pub fn srpcap(&self) -> SRPCAP_R

Bit 8 - SRP-Capable

pub fn hnpcap(&self) -> HNPCAP_R

Bit 9 - HNP-Capable

pub fn usbtrdtim(&self) -> USBTRDTIM_R

Bits 10:13 - USB Turnaround Time

pub fn termseldlpulse(&self) -> TERMSELDLPULSE_R

Bit 22 - TermSel DLine Pulsing Selection

pub fn txenddelay(&self) -> TXENDDELAY_R

Bit 28 - Tx End Delay

pub fn forcehstmode(&self) -> FORCEHSTMODE_R

Bit 29 - Force Host Mode

pub fn forcedevmode(&self) -> FORCEDEVMODE_R

Bit 30 - Force Device Mode

impl R<u8, TXFNUM_A>

pub fn variant(&self) -> Variant<u8, TXFNUM_A>

Get enumerated values variant

pub fn is_f0(&self) -> bool

Checks if the value of the field is F0

pub fn is_f1(&self) -> bool

Checks if the value of the field is F1

pub fn is_f2(&self) -> bool

Checks if the value of the field is F2

pub fn is_f3(&self) -> bool

Checks if the value of the field is F3

pub fn is_f4(&self) -> bool

Checks if the value of the field is F4

pub fn is_f5(&self) -> bool

Checks if the value of the field is F5

pub fn is_f6(&self) -> bool

Checks if the value of the field is F6

pub fn is_fall(&self) -> bool

Checks if the value of the field is FALL

impl R<u32, Reg<u32, _GRSTCTL>>

pub fn csftrst(&self) -> CSFTRST_R

Bit 0 - Core Soft Reset (host and device)

pub fn piufssftrst(&self) -> PIUFSSFTRST_R

Bit 1 - PIU FS Dedicated Controller Soft Reset

pub fn frmcntrrst(&self) -> FRMCNTRRST_R

Bit 2 - Host Frame Counter Reset

pub fn rxfflsh(&self) -> RXFFLSH_R

Bit 4 - RxFIFO Flush

pub fn txfflsh(&self) -> TXFFLSH_R

Bit 5 - TxFIFO Flush

pub fn txfnum(&self) -> TXFNUM_R

Bits 6:10 - TxFIFO Number (host and device)

pub fn dmareq(&self) -> DMAREQ_R

Bit 30 - DMA Request Signal

pub fn ahbidle(&self) -> AHBIDLE_R

Bit 31 - AHB Master Idle

impl R<u32, Reg<u32, _GINTSTS>>

pub fn curmod(&self) -> CURMOD_R

Bit 0 - Current Mode of Operation (host and device)

pub fn modemis(&self) -> MODEMIS_R

Bit 1 - Mode Mismatch Interrupt (host and device)

pub fn otgint(&self) -> OTGINT_R

Bit 2 - OTG Interrupt (host and device)

pub fn sof(&self) -> SOF_R

Bit 3 - Start of Frame (host and device)

pub fn rxflvl(&self) -> RXFLVL_R

Bit 4 - RxFIFO Non-Empty (host and device)

pub fn nptxfemp(&self) -> NPTXFEMP_R

Bit 5 - Non-Periodic TxFIFO Empty (host only)

pub fn ginnakeff(&self) -> GINNAKEFF_R

Bit 6 - Global IN Non-periodic NAK Effective (device only)

pub fn goutnakeff(&self) -> GOUTNAKEFF_R

Bit 7 - Global OUT NAK Effective (device only)

pub fn erlysusp(&self) -> ERLYSUSP_R

Bit 10 - Early Suspend (device only)

pub fn usbsusp(&self) -> USBSUSP_R

Bit 11 - USB Suspend (device only)

pub fn usbrst(&self) -> USBRST_R

Bit 12 - USB Reset (device only)

pub fn enumdone(&self) -> ENUMDONE_R

Bit 13 - Enumeration Done (device only)

pub fn isooutdrop(&self) -> ISOOUTDROP_R

Bit 14 - Isochronous OUT Packet Dropped Interrupt (device only)

pub fn eopf(&self) -> EOPF_R

Bit 15 - End of Periodic Frame Interrupt

pub fn epmis(&self) -> EPMIS_R

Bit 17 - Endpoint Mismatch Interrupt (device only)

pub fn iepint(&self) -> IEPINT_R

Bit 18 - IN Endpoints Interrupt (device only)

pub fn oepint(&self) -> OEPINT_R

Bit 19 - OUT Endpoints Interrupt (device only)

pub fn incompisoin(&self) -> INCOMPISOIN_R

Bit 20 - Incomplete Isochronous IN Transfer (device only)

pub fn incomplp(&self) -> INCOMPLP_R

Bit 21 - Incomplete Periodic Transfer (device only)

pub fn fetsusp(&self) -> FETSUSP_R

Bit 22 - Data Fetch Suspended (device only)

pub fn resetdet(&self) -> RESETDET_R

Bit 23 - Reset detected Interrupt (device only)

pub fn prtint(&self) -> PRTINT_R

Bit 24 - Host Port Interrupt (host only)

pub fn hchint(&self) -> HCHINT_R

Bit 25 - Host Channels Interrupt (host only)

pub fn ptxfemp(&self) -> PTXFEMP_R

Bit 26 - Periodic TxFIFO Empty (host only)

pub fn conidstschng(&self) -> CONIDSTSCHNG_R

Bit 28 - Connector ID Status Change (host and device)

pub fn disconnint(&self) -> DISCONNINT_R

Bit 29 - Disconnect Detected Interrupt (host only)

pub fn sessreqint(&self) -> SESSREQINT_R

Bit 30 - Session Request/New Session Detected Interrupt (host and device)

pub fn wkupint(&self) -> WKUPINT_R

Bit 31 - Resume/Remote Wakeup Detected Interrupt (host and device)

impl R<u32, Reg<u32, _GINTMSK>>

pub fn modemismsk(&self) -> MODEMISMSK_R

Bit 1 - Mode Mismatch Interrupt Mask (host and device)

pub fn otgintmsk(&self) -> OTGINTMSK_R

Bit 2 - OTG Interrupt Mask (host and device)

pub fn sofmsk(&self) -> SOFMSK_R

Bit 3 - Start of Frame Mask (host and device)

pub fn rxflvlmsk(&self) -> RXFLVLMSK_R

Bit 4 - Receive FIFO Non-Empty Mask (host and device)

pub fn nptxfempmsk(&self) -> NPTXFEMPMSK_R

Bit 5 - Non-Periodic TxFIFO Empty Mask (host only)

pub fn ginnakeffmsk(&self) -> GINNAKEFFMSK_R

Bit 6 - Global Non-periodic IN NAK Effective Mask (device only)

pub fn goutnakeffmsk(&self) -> GOUTNAKEFFMSK_R

Bit 7 - Global OUT NAK Effective Mask (device only)

pub fn erlysuspmsk(&self) -> ERLYSUSPMSK_R

Bit 10 - Early Suspend Mask (device only)

pub fn usbsuspmsk(&self) -> USBSUSPMSK_R

Bit 11 - USB Suspend Mask (device only)

pub fn usbrstmsk(&self) -> USBRSTMSK_R

Bit 12 - USB Reset Mask (device only)

pub fn enumdonemsk(&self) -> ENUMDONEMSK_R

Bit 13 - Enumeration Done Mask (device only)

pub fn isooutdropmsk(&self) -> ISOOUTDROPMSK_R

Bit 14 - Isochronous OUT Packet Dropped Interrupt Mask (device only)

pub fn eopfmsk(&self) -> EOPFMSK_R

Bit 15 - End of Periodic Frame Interrupt Mask (device only)

pub fn epmismsk(&self) -> EPMISMSK_R

Bit 17 - Endpoint Mismatch Interrupt Mask (device only)

pub fn iepintmsk(&self) -> IEPINTMSK_R

Bit 18 - IN Endpoints Interrupt Mask (device only)

pub fn oepintmsk(&self) -> OEPINTMSK_R

Bit 19 - OUT Endpoints Interrupt Mask (device only)

pub fn incompisoinmsk(&self) -> INCOMPISOINMSK_R

Bit 20 - Incomplete Isochronous IN Transfer Mask (device only)

pub fn incomplpmsk(&self) -> INCOMPLPMSK_R

Bit 21 - Incomplete Periodic Transfer Mask (host only)

pub fn fetsuspmsk(&self) -> FETSUSPMSK_R

Bit 22 - Data Fetch Suspended Mask (device only)

pub fn resetdetmsk(&self) -> RESETDETMSK_R

Bit 23 - Reset detected Interrupt Mask (device only)

pub fn prtintmsk(&self) -> PRTINTMSK_R

Bit 24 - Host Port Interrupt Mask (host only)

pub fn hchintmsk(&self) -> HCHINTMSK_R

Bit 25 - Host Channels Interrupt Mask (host only)

pub fn ptxfempmsk(&self) -> PTXFEMPMSK_R

Bit 26 - Periodic TxFIFO Empty Mask (host only)

pub fn conidstschngmsk(&self) -> CONIDSTSCHNGMSK_R

Bit 28 - Connector ID Status Change Mask (host and device)

pub fn disconnintmsk(&self) -> DISCONNINTMSK_R

Bit 29 - Disconnect Detected Interrupt Mask (host and device)

pub fn sessreqintmsk(&self) -> SESSREQINTMSK_R

Bit 30 - Session Request/New Session Detected Interrupt Mask (host and device)

pub fn wkupintmsk(&self) -> WKUPINTMSK_R

Bit 31 - Resume/Remote Wakeup Detected Interrupt Mask (host and device)

impl R<u8, DPID_A>

pub fn variant(&self) -> DPID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u8, PKTSTS_A>

pub fn variant(&self) -> Variant<u8, PKTSTS_A>

Get enumerated values variant

pub fn is_goutnak(&self) -> bool

Checks if the value of the field is GOUTNAK

pub fn is_pktrcv(&self) -> bool

Checks if the value of the field is PKTRCV

pub fn is_xfercompl(&self) -> bool

Checks if the value of the field is XFERCOMPL

pub fn is_setupcompl(&self) -> bool

Checks if the value of the field is SETUPCOMPL

pub fn is_tglerr(&self) -> bool

Checks if the value of the field is TGLERR

pub fn is_setuprcv(&self) -> bool

Checks if the value of the field is SETUPRCV

pub fn is_chlt(&self) -> bool

Checks if the value of the field is CHLT

impl R<u32, Reg<u32, _GRXSTSR>>

pub fn chnum(&self) -> CHNUM_R

Bits 0:3 - Channel Number

pub fn bcnt(&self) -> BCNT_R

Bits 4:14 - Byte Count

pub fn dpid(&self) -> DPID_R

Bits 15:16 - Data PID

pub fn pktsts(&self) -> PKTSTS_R

Bits 17:20 - Packet Status

pub fn fn_(&self) -> FN_R

Bits 21:24 - Frame Number

impl R<u8, DPID_A>

pub fn variant(&self) -> DPID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u8, PKTSTS_A>

pub fn variant(&self) -> Variant<u8, PKTSTS_A>

Get enumerated values variant

pub fn is_goutnak(&self) -> bool

Checks if the value of the field is GOUTNAK

pub fn is_pktrcv(&self) -> bool

Checks if the value of the field is PKTRCV

pub fn is_xfercompl(&self) -> bool

Checks if the value of the field is XFERCOMPL

pub fn is_setupcompl(&self) -> bool

Checks if the value of the field is SETUPCOMPL

pub fn is_tglerr(&self) -> bool

Checks if the value of the field is TGLERR

pub fn is_setuprcv(&self) -> bool

Checks if the value of the field is SETUPRCV

pub fn is_chlt(&self) -> bool

Checks if the value of the field is CHLT

impl R<u32, Reg<u32, _GRXSTSP>>

pub fn chnum(&self) -> CHNUM_R

Bits 0:3 - Channel Number

pub fn bcnt(&self) -> BCNT_R

Bits 4:14 - Byte Count

pub fn dpid(&self) -> DPID_R

Bits 15:16 - Data PID (host or device)

pub fn pktsts(&self) -> PKTSTS_R

Bits 17:20 - Packet Status (host or device)

pub fn fn_(&self) -> FN_R

Bits 21:24 - Frame Number

impl R<u32, Reg<u32, _GRXFSIZ>>

pub fn rxfdep(&self) -> RXFDEP_R

Bits 0:9 - RxFIFO Depth

impl R<u32, Reg<u32, _GNPTXFSIZ>>

pub fn nptxfstaddr(&self) -> NPTXFSTADDR_R

Bits 0:15 - Non-periodic Transmit RAM Start Address

pub fn nptxfineptxf0dep(&self) -> NPTXFINEPTXF0DEP_R

Bits 16:31 - Non-periodic TxFIFO Depth (host only) / IN Endpoint TxFIFO 0 Depth (device only)

impl R<u32, Reg<u32, _GNPTXSTS>>

pub fn nptxfspcavail(&self) -> NPTXFSPCAVAIL_R

Bits 0:15 - Non-periodic TxFIFO Space Avail

pub fn nptxqspcavail(&self) -> NPTXQSPCAVAIL_R

Bits 16:23 - Non-periodic Transmit Request Queue Space Available

pub fn nptxqtop(&self) -> NPTXQTOP_R

Bits 24:30 - Top of the Non-periodic Transmit Request Queue

impl R<u32, Reg<u32, _GSNPSID>>

pub fn synopsysid(&self) -> SYNOPSYSID_R

Bits 0:31

impl R<u32, Reg<u32, _GDFIFOCFG>>

pub fn gdfifocfg(&self) -> GDFIFOCFG_R

Bits 0:15

pub fn epinfobaseaddr(&self) -> EPINFOBASEADDR_R

Bits 16:31

impl R<u32, Reg<u32, _HPTXFSIZ>>

pub fn ptxfstaddr(&self) -> PTXFSTADDR_R

Bits 0:10 - Host Periodic TxFIFO Start Address

pub fn ptxfsize(&self) -> PTXFSIZE_R

Bits 16:25 - Host Periodic TxFIFO Depth

impl R<u32, Reg<u32, _DIEPTXF1>>

pub fn inepntxfstaddr(&self) -> INEPNTXFSTADDR_R

Bits 0:10 - IN Endpoint FIFOn Transmit RAM Start Address

pub fn inepntxfdep(&self) -> INEPNTXFDEP_R

Bits 16:25 - IN Endpoint TxFIFO Depth

impl R<u32, Reg<u32, _DIEPTXF2>>

pub fn inepntxfstaddr(&self) -> INEPNTXFSTADDR_R

Bits 0:10 - IN Endpoint FIFOn Transmit RAM Start Address

pub fn inepntxfdep(&self) -> INEPNTXFDEP_R

Bits 16:25 - IN Endpoint TxFIFO Depth

impl R<u32, Reg<u32, _DIEPTXF3>>

pub fn inepntxfstaddr(&self) -> INEPNTXFSTADDR_R

Bits 0:11 - IN Endpoint FIFOn Transmit RAM Start Address

pub fn inepntxfdep(&self) -> INEPNTXFDEP_R

Bits 16:25 - IN Endpoint TxFIFO Depth

impl R<u32, Reg<u32, _DIEPTXF4>>

pub fn inepntxfstaddr(&self) -> INEPNTXFSTADDR_R

Bits 0:11 - IN Endpoint FIFOn Transmit RAM Start Address

pub fn inepntxfdep(&self) -> INEPNTXFDEP_R

Bits 16:25 - IN Endpoint TxFIFO Depth

impl R<u32, Reg<u32, _DIEPTXF5>>

pub fn inepntxfstaddr(&self) -> INEPNTXFSTADDR_R

Bits 0:11 - IN Endpoint FIFOn Transmit RAM Start Address

pub fn inepntxfdep(&self) -> INEPNTXFDEP_R

Bits 16:25 - IN Endpoint TxFIFO Depth

impl R<u32, Reg<u32, _DIEPTXF6>>

pub fn inepntxfstaddr(&self) -> INEPNTXFSTADDR_R

Bits 0:11 - IN Endpoint FIFOn Transmit RAM Start Address

pub fn inepntxfdep(&self) -> INEPNTXFDEP_R

Bits 16:25 - IN Endpoint TxFIFO Depth

impl R<u8, FSLSPCLKSEL_A>

pub fn variant(&self) -> Variant<u8, FSLSPCLKSEL_A>

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

impl R<u32, Reg<u32, _HCFG>>

pub fn fslspclksel(&self) -> FSLSPCLKSEL_R

Bits 0:1 - FS/LS PHY Clock Select

pub fn fslssupp(&self) -> FSLSSUPP_R

Bit 2 - FS- and LS-Only Support

pub fn ena32khzs(&self) -> ENA32KHZS_R

Bit 7 - Enable 32 kHz Suspend Mode

pub fn resvalid(&self) -> RESVALID_R

Bits 8:15 - Resume Validation Period

pub fn modechtimen(&self) -> MODECHTIMEN_R

Bit 31 - Mode Change Time

impl R<u32, Reg<u32, _HFIR>>

pub fn frint(&self) -> FRINT_R

Bits 0:15 - Frame Interval

pub fn hfirrldctrl(&self) -> HFIRRLDCTRL_R

Bit 16 - Reload Control

impl R<u32, Reg<u32, _HFNUM>>

pub fn frnum(&self) -> FRNUM_R

Bits 0:15 - Frame Number

pub fn frrem(&self) -> FRREM_R

Bits 16:31 - Frame Time Remaining

impl R<u32, Reg<u32, _HPTXSTS>>

pub fn ptxfspcavail(&self) -> PTXFSPCAVAIL_R

Bits 0:15 - Periodic Transmit Data FIFO Space Available

pub fn ptxqspcavail(&self) -> PTXQSPCAVAIL_R

Bits 16:23 - Periodic Transmit Request Queue Space Available

pub fn ptxqtop(&self) -> PTXQTOP_R

Bits 24:31 - Top of the Periodic Transmit Request Queue

impl R<u32, Reg<u32, _HAINT>>

pub fn haint(&self) -> HAINT_R

Bits 0:13 - Channel Interrupt for channel 0 - 13.

impl R<u32, Reg<u32, _HAINTMSK>>

pub fn haintmsk(&self) -> HAINTMSK_R

Bits 0:13 - Channel Interrupt Mask for channel 0 - 13

impl R<u8, PRTTSTCTL_A>

pub fn variant(&self) -> Variant<u8, PRTTSTCTL_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_j(&self) -> bool

Checks if the value of the field is J

pub fn is_k(&self) -> bool

Checks if the value of the field is K

pub fn is_se0nak(&self) -> bool

Checks if the value of the field is SE0NAK

pub fn is_packet(&self) -> bool

Checks if the value of the field is PACKET

pub fn is_force(&self) -> bool

Checks if the value of the field is FORCE

impl R<u8, PRTSPD_A>

pub fn variant(&self) -> Variant<u8, PRTSPD_A>

Get enumerated values variant

pub fn is_fs(&self) -> bool

Checks if the value of the field is FS

pub fn is_ls(&self) -> bool

Checks if the value of the field is LS

impl R<u32, Reg<u32, _HPRT>>

pub fn prtconnsts(&self) -> PRTCONNSTS_R

Bit 0 - Port Connect Status

pub fn prtconndet(&self) -> PRTCONNDET_R

Bit 1 - Port Connect Detected

pub fn prtena(&self) -> PRTENA_R

Bit 2 - Port Enable

pub fn prtenchng(&self) -> PRTENCHNG_R

Bit 3 - Port Enable/Disable Change

pub fn prtovrcurract(&self) -> PRTOVRCURRACT_R

Bit 4 - Port Overcurrent Active

pub fn prtovrcurrchng(&self) -> PRTOVRCURRCHNG_R

Bit 5 - Port Overcurrent Change

pub fn prtres(&self) -> PRTRES_R

Bit 6 - Port Resume

pub fn prtsusp(&self) -> PRTSUSP_R

Bit 7 - Port Suspend

pub fn prtrst(&self) -> PRTRST_R

Bit 8 - Port Reset

pub fn prtlnsts(&self) -> PRTLNSTS_R

Bits 10:11 - Port Line Status

pub fn prtpwr(&self) -> PRTPWR_R

Bit 12 - Port Power

pub fn prttstctl(&self) -> PRTTSTCTL_R

Bits 13:16 - Port Test Control

pub fn prtspd(&self) -> PRTSPD_R

Bits 17:18 - Port Speed

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _HC0_CHAR>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn epnum(&self) -> EPNUM_R

Bits 11:14 - Endpoint Number

pub fn epdir(&self) -> EPDIR_R

Bit 15 - Endpoint Direction

pub fn lspddev(&self) -> LSPDDEV_R

Bit 17 - Low-Speed Device

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn mc(&self) -> MC_R

Bits 20:21 - Multi Count (MC) / Error Count

pub fn devaddr(&self) -> DEVADDR_R

Bits 22:28 - Device Address

pub fn oddfrm(&self) -> ODDFRM_R

Bit 29 - Odd Frame

pub fn chdis(&self) -> CHDIS_R

Bit 30 - Channel Disable

pub fn chena(&self) -> CHENA_R

Bit 31 - Channel Enable

impl R<u32, Reg<u32, _HC0_SPLT>>

pub fn prtaddr(&self) -> PRTADDR_R

Bits 0:6 - Port Address

pub fn hubaddr(&self) -> HUBADDR_R

Bits 7:13 - Hub Address

pub fn xactpos(&self) -> XACTPOS_R

Bits 14:15 - Transaction Position

pub fn compsplt(&self) -> COMPSPLT_R

Bit 16 - Do Complete Split

pub fn spltena(&self) -> SPLTENA_R

Bit 31 - Split Enable

impl R<u32, Reg<u32, _HC0_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed

pub fn chhltd(&self) -> CHHLTD_R

Bit 1 - Channel Halted

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn stall(&self) -> STALL_R

Bit 3 - STALL Response Received Interrupt

pub fn nak(&self) -> NAK_R

Bit 4 - NAK Response Received Interrupt

pub fn ack(&self) -> ACK_R

Bit 5 - ACK Response Received/Transmitted Interrupt

pub fn xacterr(&self) -> XACTERR_R

Bit 7 - Transaction Error

pub fn bblerr(&self) -> BBLERR_R

Bit 8 - Babble Error

pub fn frmovrun(&self) -> FRMOVRUN_R

Bit 9 - Frame Overrun

pub fn datatglerr(&self) -> DATATGLERR_R

Bit 10 - Data Toggle Error

impl R<u32, Reg<u32, _HC0_INTMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Mask

pub fn chhltdmsk(&self) -> CHHLTDMSK_R

Bit 1 - Channel Halted Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error Mask

pub fn stallmsk(&self) -> STALLMSK_R

Bit 3 - STALL Response Received Interrupt Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 4 - NAK Response Received Interrupt Mask

pub fn ackmsk(&self) -> ACKMSK_R

Bit 5 - ACK Response Received/Transmitted Interrupt Mask

pub fn xacterrmsk(&self) -> XACTERRMSK_R

Bit 7 - Transaction Error Mask

pub fn bblerrmsk(&self) -> BBLERRMSK_R

Bit 8 - Babble Error Mask

pub fn frmovrunmsk(&self) -> FRMOVRUNMSK_R

Bit 9 - Frame Overrun Mask

pub fn datatglerrmsk(&self) -> DATATGLERRMSK_R

Bit 10 - Data Toggle Error Mask

impl R<u8, PID_A>

pub fn variant(&self) -> PID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _HC0_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn pid(&self) -> PID_R

Bits 29:30 - The Application Programs This Field With the Type of

impl R<u32, Reg<u32, _HC0_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31 - DMA Address

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _HC1_CHAR>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn epnum(&self) -> EPNUM_R

Bits 11:14 - Endpoint Number

pub fn epdir(&self) -> EPDIR_R

Bit 15 - Endpoint Direction

pub fn lspddev(&self) -> LSPDDEV_R

Bit 17 - Low-Speed Device

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn mc(&self) -> MC_R

Bits 20:21 - Multi Count (MC) / Error Count

pub fn devaddr(&self) -> DEVADDR_R

Bits 22:28 - Device Address

pub fn oddfrm(&self) -> ODDFRM_R

Bit 29 - Odd Frame

pub fn chdis(&self) -> CHDIS_R

Bit 30 - Channel Disable

pub fn chena(&self) -> CHENA_R

Bit 31 - Channel Enable

impl R<u32, Reg<u32, _HC1_SPLT>>

pub fn prtaddr(&self) -> PRTADDR_R

Bits 0:6 - Port Address

pub fn hubaddr(&self) -> HUBADDR_R

Bits 7:13 - Hub Address

pub fn xactpos(&self) -> XACTPOS_R

Bits 14:15 - Transaction Position

pub fn compsplt(&self) -> COMPSPLT_R

Bit 16 - Do Complete Split

pub fn spltena(&self) -> SPLTENA_R

Bit 31 - Split Enable

impl R<u32, Reg<u32, _HC1_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed

pub fn chhltd(&self) -> CHHLTD_R

Bit 1 - Channel Halted

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn stall(&self) -> STALL_R

Bit 3 - STALL Response Received Interrupt

pub fn nak(&self) -> NAK_R

Bit 4 - NAK Response Received Interrupt

pub fn ack(&self) -> ACK_R

Bit 5 - ACK Response Received/Transmitted Interrupt

pub fn xacterr(&self) -> XACTERR_R

Bit 7 - Transaction Error

pub fn bblerr(&self) -> BBLERR_R

Bit 8 - Babble Error

pub fn frmovrun(&self) -> FRMOVRUN_R

Bit 9 - Frame Overrun

pub fn datatglerr(&self) -> DATATGLERR_R

Bit 10 - Data Toggle Error

impl R<u32, Reg<u32, _HC1_INTMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Mask

pub fn chhltdmsk(&self) -> CHHLTDMSK_R

Bit 1 - Channel Halted Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error Mask

pub fn stallmsk(&self) -> STALLMSK_R

Bit 3 - STALL Response Received Interrupt Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 4 - NAK Response Received Interrupt Mask

pub fn ackmsk(&self) -> ACKMSK_R

Bit 5 - ACK Response Received/Transmitted Interrupt Mask

pub fn xacterrmsk(&self) -> XACTERRMSK_R

Bit 7 - Transaction Error Mask

pub fn bblerrmsk(&self) -> BBLERRMSK_R

Bit 8 - Babble Error Mask

pub fn frmovrunmsk(&self) -> FRMOVRUNMSK_R

Bit 9 - Frame Overrun Mask

pub fn datatglerrmsk(&self) -> DATATGLERRMSK_R

Bit 10 - Data Toggle Error Mask

impl R<u8, PID_A>

pub fn variant(&self) -> PID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _HC1_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn pid(&self) -> PID_R

Bits 29:30 - The Application Programs This Field With the Type of

impl R<u32, Reg<u32, _HC1_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31 - DMA Address

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _HC2_CHAR>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn epnum(&self) -> EPNUM_R

Bits 11:14 - Endpoint Number

pub fn epdir(&self) -> EPDIR_R

Bit 15 - Endpoint Direction

pub fn lspddev(&self) -> LSPDDEV_R

Bit 17 - Low-Speed Device

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn mc(&self) -> MC_R

Bits 20:21 - Multi Count (MC) / Error Count

pub fn devaddr(&self) -> DEVADDR_R

Bits 22:28 - Device Address

pub fn oddfrm(&self) -> ODDFRM_R

Bit 29 - Odd Frame

pub fn chdis(&self) -> CHDIS_R

Bit 30 - Channel Disable

pub fn chena(&self) -> CHENA_R

Bit 31 - Channel Enable

impl R<u32, Reg<u32, _HC2_SPLT>>

pub fn prtaddr(&self) -> PRTADDR_R

Bits 0:6 - Port Address

pub fn hubaddr(&self) -> HUBADDR_R

Bits 7:13 - Hub Address

pub fn xactpos(&self) -> XACTPOS_R

Bits 14:15 - Transaction Position

pub fn compsplt(&self) -> COMPSPLT_R

Bit 16 - Do Complete Split

pub fn spltena(&self) -> SPLTENA_R

Bit 31 - Split Enable

impl R<u32, Reg<u32, _HC2_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed

pub fn chhltd(&self) -> CHHLTD_R

Bit 1 - Channel Halted

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn stall(&self) -> STALL_R

Bit 3 - STALL Response Received Interrupt

pub fn nak(&self) -> NAK_R

Bit 4 - NAK Response Received Interrupt

pub fn ack(&self) -> ACK_R

Bit 5 - ACK Response Received/Transmitted Interrupt

pub fn xacterr(&self) -> XACTERR_R

Bit 7 - Transaction Error

pub fn bblerr(&self) -> BBLERR_R

Bit 8 - Babble Error

pub fn frmovrun(&self) -> FRMOVRUN_R

Bit 9 - Frame Overrun

pub fn datatglerr(&self) -> DATATGLERR_R

Bit 10 - Data Toggle Error

impl R<u32, Reg<u32, _HC2_INTMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Mask

pub fn chhltdmsk(&self) -> CHHLTDMSK_R

Bit 1 - Channel Halted Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error Mask

pub fn stallmsk(&self) -> STALLMSK_R

Bit 3 - STALL Response Received Interrupt Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 4 - NAK Response Received Interrupt Mask

pub fn ackmsk(&self) -> ACKMSK_R

Bit 5 - ACK Response Received/Transmitted Interrupt Mask

pub fn xacterrmsk(&self) -> XACTERRMSK_R

Bit 7 - Transaction Error Mask

pub fn bblerrmsk(&self) -> BBLERRMSK_R

Bit 8 - Babble Error Mask

pub fn frmovrunmsk(&self) -> FRMOVRUNMSK_R

Bit 9 - Frame Overrun Mask

pub fn datatglerrmsk(&self) -> DATATGLERRMSK_R

Bit 10 - Data Toggle Error Mask

impl R<u8, PID_A>

pub fn variant(&self) -> PID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _HC2_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn pid(&self) -> PID_R

Bits 29:30 - The Application Programs This Field With the Type of

impl R<u32, Reg<u32, _HC2_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31 - DMA Address

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _HC3_CHAR>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn epnum(&self) -> EPNUM_R

Bits 11:14 - Endpoint Number

pub fn epdir(&self) -> EPDIR_R

Bit 15 - Endpoint Direction

pub fn lspddev(&self) -> LSPDDEV_R

Bit 17 - Low-Speed Device

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn mc(&self) -> MC_R

Bits 20:21 - Multi Count (MC) / Error Count

pub fn devaddr(&self) -> DEVADDR_R

Bits 22:28 - Device Address

pub fn oddfrm(&self) -> ODDFRM_R

Bit 29 - Odd Frame

pub fn chdis(&self) -> CHDIS_R

Bit 30 - Channel Disable

pub fn chena(&self) -> CHENA_R

Bit 31 - Channel Enable

impl R<u32, Reg<u32, _HC3_SPLT>>

pub fn prtaddr(&self) -> PRTADDR_R

Bits 0:6 - Port Address

pub fn hubaddr(&self) -> HUBADDR_R

Bits 7:13 - Hub Address

pub fn xactpos(&self) -> XACTPOS_R

Bits 14:15 - Transaction Position

pub fn compsplt(&self) -> COMPSPLT_R

Bit 16 - Do Complete Split

pub fn spltena(&self) -> SPLTENA_R

Bit 31 - Split Enable

impl R<u32, Reg<u32, _HC3_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed

pub fn chhltd(&self) -> CHHLTD_R

Bit 1 - Channel Halted

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn stall(&self) -> STALL_R

Bit 3 - STALL Response Received Interrupt

pub fn nak(&self) -> NAK_R

Bit 4 - NAK Response Received Interrupt

pub fn ack(&self) -> ACK_R

Bit 5 - ACK Response Received/Transmitted Interrupt

pub fn xacterr(&self) -> XACTERR_R

Bit 7 - Transaction Error

pub fn bblerr(&self) -> BBLERR_R

Bit 8 - Babble Error

pub fn frmovrun(&self) -> FRMOVRUN_R

Bit 9 - Frame Overrun

pub fn datatglerr(&self) -> DATATGLERR_R

Bit 10 - Data Toggle Error

impl R<u32, Reg<u32, _HC3_INTMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Mask

pub fn chhltdmsk(&self) -> CHHLTDMSK_R

Bit 1 - Channel Halted Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error Mask

pub fn stallmsk(&self) -> STALLMSK_R

Bit 3 - STALL Response Received Interrupt Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 4 - NAK Response Received Interrupt Mask

pub fn ackmsk(&self) -> ACKMSK_R

Bit 5 - ACK Response Received/Transmitted Interrupt Mask

pub fn xacterrmsk(&self) -> XACTERRMSK_R

Bit 7 - Transaction Error Mask

pub fn bblerrmsk(&self) -> BBLERRMSK_R

Bit 8 - Babble Error Mask

pub fn frmovrunmsk(&self) -> FRMOVRUNMSK_R

Bit 9 - Frame Overrun Mask

pub fn datatglerrmsk(&self) -> DATATGLERRMSK_R

Bit 10 - Data Toggle Error Mask

impl R<u8, PID_A>

pub fn variant(&self) -> PID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _HC3_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn pid(&self) -> PID_R

Bits 29:30 - The Application Programs This Field With the Type of

impl R<u32, Reg<u32, _HC3_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31 - DMA Address

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _HC4_CHAR>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn epnum(&self) -> EPNUM_R

Bits 11:14 - Endpoint Number

pub fn epdir(&self) -> EPDIR_R

Bit 15 - Endpoint Direction

pub fn lspddev(&self) -> LSPDDEV_R

Bit 17 - Low-Speed Device

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn mc(&self) -> MC_R

Bits 20:21 - Multi Count (MC) / Error Count

pub fn devaddr(&self) -> DEVADDR_R

Bits 22:28 - Device Address

pub fn oddfrm(&self) -> ODDFRM_R

Bit 29 - Odd Frame

pub fn chdis(&self) -> CHDIS_R

Bit 30 - Channel Disable

pub fn chena(&self) -> CHENA_R

Bit 31 - Channel Enable

impl R<u32, Reg<u32, _HC4_SPLT>>

pub fn prtaddr(&self) -> PRTADDR_R

Bits 0:6 - Port Address

pub fn hubaddr(&self) -> HUBADDR_R

Bits 7:13 - Hub Address

pub fn xactpos(&self) -> XACTPOS_R

Bits 14:15 - Transaction Position

pub fn compsplt(&self) -> COMPSPLT_R

Bit 16 - Do Complete Split

pub fn spltena(&self) -> SPLTENA_R

Bit 31 - Split Enable

impl R<u32, Reg<u32, _HC4_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed

pub fn chhltd(&self) -> CHHLTD_R

Bit 1 - Channel Halted

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn stall(&self) -> STALL_R

Bit 3 - STALL Response Received Interrupt

pub fn nak(&self) -> NAK_R

Bit 4 - NAK Response Received Interrupt

pub fn ack(&self) -> ACK_R

Bit 5 - ACK Response Received/Transmitted Interrupt

pub fn xacterr(&self) -> XACTERR_R

Bit 7 - Transaction Error

pub fn bblerr(&self) -> BBLERR_R

Bit 8 - Babble Error

pub fn frmovrun(&self) -> FRMOVRUN_R

Bit 9 - Frame Overrun

pub fn datatglerr(&self) -> DATATGLERR_R

Bit 10 - Data Toggle Error

impl R<u32, Reg<u32, _HC4_INTMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Mask

pub fn chhltdmsk(&self) -> CHHLTDMSK_R

Bit 1 - Channel Halted Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error Mask

pub fn stallmsk(&self) -> STALLMSK_R

Bit 3 - STALL Response Received Interrupt Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 4 - NAK Response Received Interrupt Mask

pub fn ackmsk(&self) -> ACKMSK_R

Bit 5 - ACK Response Received/Transmitted Interrupt Mask

pub fn xacterrmsk(&self) -> XACTERRMSK_R

Bit 7 - Transaction Error Mask

pub fn bblerrmsk(&self) -> BBLERRMSK_R

Bit 8 - Babble Error Mask

pub fn frmovrunmsk(&self) -> FRMOVRUNMSK_R

Bit 9 - Frame Overrun Mask

pub fn datatglerrmsk(&self) -> DATATGLERRMSK_R

Bit 10 - Data Toggle Error Mask

impl R<u8, PID_A>

pub fn variant(&self) -> PID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _HC4_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn pid(&self) -> PID_R

Bits 29:30 - The Application Programs This Field With the Type of

impl R<u32, Reg<u32, _HC4_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31 - DMA Address

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _HC5_CHAR>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn epnum(&self) -> EPNUM_R

Bits 11:14 - Endpoint Number

pub fn epdir(&self) -> EPDIR_R

Bit 15 - Endpoint Direction

pub fn lspddev(&self) -> LSPDDEV_R

Bit 17 - Low-Speed Device

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn mc(&self) -> MC_R

Bits 20:21 - Multi Count (MC) / Error Count

pub fn devaddr(&self) -> DEVADDR_R

Bits 22:28 - Device Address

pub fn oddfrm(&self) -> ODDFRM_R

Bit 29 - Odd Frame

pub fn chdis(&self) -> CHDIS_R

Bit 30 - Channel Disable

pub fn chena(&self) -> CHENA_R

Bit 31 - Channel Enable

impl R<u32, Reg<u32, _HC5_SPLT>>

pub fn prtaddr(&self) -> PRTADDR_R

Bits 0:6 - Port Address

pub fn hubaddr(&self) -> HUBADDR_R

Bits 7:13 - Hub Address

pub fn xactpos(&self) -> XACTPOS_R

Bits 14:15 - Transaction Position

pub fn compsplt(&self) -> COMPSPLT_R

Bit 16 - Do Complete Split

pub fn spltena(&self) -> SPLTENA_R

Bit 31 - Split Enable

impl R<u32, Reg<u32, _HC5_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed

pub fn chhltd(&self) -> CHHLTD_R

Bit 1 - Channel Halted

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn stall(&self) -> STALL_R

Bit 3 - STALL Response Received Interrupt

pub fn nak(&self) -> NAK_R

Bit 4 - NAK Response Received Interrupt

pub fn ack(&self) -> ACK_R

Bit 5 - ACK Response Received/Transmitted Interrupt

pub fn xacterr(&self) -> XACTERR_R

Bit 7 - Transaction Error

pub fn bblerr(&self) -> BBLERR_R

Bit 8 - Babble Error

pub fn frmovrun(&self) -> FRMOVRUN_R

Bit 9 - Frame Overrun

pub fn datatglerr(&self) -> DATATGLERR_R

Bit 10 - Data Toggle Error

impl R<u32, Reg<u32, _HC5_INTMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Mask

pub fn chhltdmsk(&self) -> CHHLTDMSK_R

Bit 1 - Channel Halted Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error Mask

pub fn stallmsk(&self) -> STALLMSK_R

Bit 3 - STALL Response Received Interrupt Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 4 - NAK Response Received Interrupt Mask

pub fn ackmsk(&self) -> ACKMSK_R

Bit 5 - ACK Response Received/Transmitted Interrupt Mask

pub fn xacterrmsk(&self) -> XACTERRMSK_R

Bit 7 - Transaction Error Mask

pub fn bblerrmsk(&self) -> BBLERRMSK_R

Bit 8 - Babble Error Mask

pub fn frmovrunmsk(&self) -> FRMOVRUNMSK_R

Bit 9 - Frame Overrun Mask

pub fn datatglerrmsk(&self) -> DATATGLERRMSK_R

Bit 10 - Data Toggle Error Mask

impl R<u8, PID_A>

pub fn variant(&self) -> PID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _HC5_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn pid(&self) -> PID_R

Bits 29:30 - The Application Programs This Field With the Type of

impl R<u32, Reg<u32, _HC5_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31 - DMA Address

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _HC6_CHAR>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn epnum(&self) -> EPNUM_R

Bits 11:14 - Endpoint Number

pub fn epdir(&self) -> EPDIR_R

Bit 15 - Endpoint Direction

pub fn lspddev(&self) -> LSPDDEV_R

Bit 17 - Low-Speed Device

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn mc(&self) -> MC_R

Bits 20:21 - Multi Count (MC) / Error Count

pub fn devaddr(&self) -> DEVADDR_R

Bits 22:28 - Device Address

pub fn oddfrm(&self) -> ODDFRM_R

Bit 29 - Odd Frame

pub fn chdis(&self) -> CHDIS_R

Bit 30 - Channel Disable

pub fn chena(&self) -> CHENA_R

Bit 31 - Channel Enable

impl R<u32, Reg<u32, _HC6_SPLT>>

pub fn prtaddr(&self) -> PRTADDR_R

Bits 0:6 - Port Address

pub fn hubaddr(&self) -> HUBADDR_R

Bits 7:13 - Hub Address

pub fn xactpos(&self) -> XACTPOS_R

Bits 14:15 - Transaction Position

pub fn compsplt(&self) -> COMPSPLT_R

Bit 16 - Do Complete Split

pub fn spltena(&self) -> SPLTENA_R

Bit 31 - Split Enable

impl R<u32, Reg<u32, _HC6_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed

pub fn chhltd(&self) -> CHHLTD_R

Bit 1 - Channel Halted

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn stall(&self) -> STALL_R

Bit 3 - STALL Response Received Interrupt

pub fn nak(&self) -> NAK_R

Bit 4 - NAK Response Received Interrupt

pub fn ack(&self) -> ACK_R

Bit 5 - ACK Response Received/Transmitted Interrupt

pub fn xacterr(&self) -> XACTERR_R

Bit 7 - Transaction Error

pub fn bblerr(&self) -> BBLERR_R

Bit 8 - Babble Error

pub fn frmovrun(&self) -> FRMOVRUN_R

Bit 9 - Frame Overrun

pub fn datatglerr(&self) -> DATATGLERR_R

Bit 10 - Data Toggle Error

impl R<u32, Reg<u32, _HC6_INTMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Mask

pub fn chhltdmsk(&self) -> CHHLTDMSK_R

Bit 1 - Channel Halted Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error Mask

pub fn stallmsk(&self) -> STALLMSK_R

Bit 3 - STALL Response Received Interrupt Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 4 - NAK Response Received Interrupt Mask

pub fn ackmsk(&self) -> ACKMSK_R

Bit 5 - ACK Response Received/Transmitted Interrupt Mask

pub fn xacterrmsk(&self) -> XACTERRMSK_R

Bit 7 - Transaction Error Mask

pub fn bblerrmsk(&self) -> BBLERRMSK_R

Bit 8 - Babble Error Mask

pub fn frmovrunmsk(&self) -> FRMOVRUNMSK_R

Bit 9 - Frame Overrun Mask

pub fn datatglerrmsk(&self) -> DATATGLERRMSK_R

Bit 10 - Data Toggle Error Mask

impl R<u8, PID_A>

pub fn variant(&self) -> PID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _HC6_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn pid(&self) -> PID_R

Bits 29:30 - The Application Programs This Field With the Type of

impl R<u32, Reg<u32, _HC6_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31 - DMA Address

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _HC7_CHAR>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn epnum(&self) -> EPNUM_R

Bits 11:14 - Endpoint Number

pub fn epdir(&self) -> EPDIR_R

Bit 15 - Endpoint Direction

pub fn lspddev(&self) -> LSPDDEV_R

Bit 17 - Low-Speed Device

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn mc(&self) -> MC_R

Bits 20:21 - Multi Count (MC) / Error Count

pub fn devaddr(&self) -> DEVADDR_R

Bits 22:28 - Device Address

pub fn oddfrm(&self) -> ODDFRM_R

Bit 29 - Odd Frame

pub fn chdis(&self) -> CHDIS_R

Bit 30 - Channel Disable

pub fn chena(&self) -> CHENA_R

Bit 31 - Channel Enable

impl R<u32, Reg<u32, _HC7_SPLT>>

pub fn prtaddr(&self) -> PRTADDR_R

Bits 0:6 - Port Address

pub fn hubaddr(&self) -> HUBADDR_R

Bits 7:13 - Hub Address

pub fn xactpos(&self) -> XACTPOS_R

Bits 14:15 - Transaction Position

pub fn compsplt(&self) -> COMPSPLT_R

Bit 16 - Do Complete Split

pub fn spltena(&self) -> SPLTENA_R

Bit 31 - Split Enable

impl R<u32, Reg<u32, _HC7_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed

pub fn chhltd(&self) -> CHHLTD_R

Bit 1 - Channel Halted

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn stall(&self) -> STALL_R

Bit 3 - STALL Response Received Interrupt

pub fn nak(&self) -> NAK_R

Bit 4 - NAK Response Received Interrupt

pub fn ack(&self) -> ACK_R

Bit 5 - ACK Response Received/Transmitted Interrupt

pub fn xacterr(&self) -> XACTERR_R

Bit 7 - Transaction Error

pub fn bblerr(&self) -> BBLERR_R

Bit 8 - Babble Error

pub fn frmovrun(&self) -> FRMOVRUN_R

Bit 9 - Frame Overrun

pub fn datatglerr(&self) -> DATATGLERR_R

Bit 10 - Data Toggle Error

impl R<u32, Reg<u32, _HC7_INTMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Mask

pub fn chhltdmsk(&self) -> CHHLTDMSK_R

Bit 1 - Channel Halted Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error Mask

pub fn stallmsk(&self) -> STALLMSK_R

Bit 3 - STALL Response Received Interrupt Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 4 - NAK Response Received Interrupt Mask

pub fn ackmsk(&self) -> ACKMSK_R

Bit 5 - ACK Response Received/Transmitted Interrupt Mask

pub fn xacterrmsk(&self) -> XACTERRMSK_R

Bit 7 - Transaction Error Mask

pub fn bblerrmsk(&self) -> BBLERRMSK_R

Bit 8 - Babble Error Mask

pub fn frmovrunmsk(&self) -> FRMOVRUNMSK_R

Bit 9 - Frame Overrun Mask

pub fn datatglerrmsk(&self) -> DATATGLERRMSK_R

Bit 10 - Data Toggle Error Mask

impl R<u8, PID_A>

pub fn variant(&self) -> PID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _HC7_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn pid(&self) -> PID_R

Bits 29:30 - The Application Programs This Field With the Type of

impl R<u32, Reg<u32, _HC7_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31 - DMA Address

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _HC8_CHAR>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn epnum(&self) -> EPNUM_R

Bits 11:14 - Endpoint Number

pub fn epdir(&self) -> EPDIR_R

Bit 15 - Endpoint Direction

pub fn lspddev(&self) -> LSPDDEV_R

Bit 17 - Low-Speed Device

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn mc(&self) -> MC_R

Bits 20:21 - Multi Count (MC) / Error Count

pub fn devaddr(&self) -> DEVADDR_R

Bits 22:28 - Device Address

pub fn oddfrm(&self) -> ODDFRM_R

Bit 29 - Odd Frame

pub fn chdis(&self) -> CHDIS_R

Bit 30 - Channel Disable

pub fn chena(&self) -> CHENA_R

Bit 31 - Channel Enable

impl R<u32, Reg<u32, _HC8_SPLT>>

pub fn prtaddr(&self) -> PRTADDR_R

Bits 0:6 - Port Address

pub fn hubaddr(&self) -> HUBADDR_R

Bits 7:13 - Hub Address

pub fn xactpos(&self) -> XACTPOS_R

Bits 14:15 - Transaction Position

pub fn compsplt(&self) -> COMPSPLT_R

Bit 16 - Do Complete Split

pub fn spltena(&self) -> SPLTENA_R

Bit 31 - Split Enable

impl R<u32, Reg<u32, _HC8_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed

pub fn chhltd(&self) -> CHHLTD_R

Bit 1 - Channel Halted

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn stall(&self) -> STALL_R

Bit 3 - STALL Response Received Interrupt

pub fn nak(&self) -> NAK_R

Bit 4 - NAK Response Received Interrupt

pub fn ack(&self) -> ACK_R

Bit 5 - ACK Response Received/Transmitted Interrupt

pub fn xacterr(&self) -> XACTERR_R

Bit 7 - Transaction Error

pub fn bblerr(&self) -> BBLERR_R

Bit 8 - Babble Error

pub fn frmovrun(&self) -> FRMOVRUN_R

Bit 9 - Frame Overrun

pub fn datatglerr(&self) -> DATATGLERR_R

Bit 10 - Data Toggle Error

impl R<u32, Reg<u32, _HC8_INTMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Mask

pub fn chhltdmsk(&self) -> CHHLTDMSK_R

Bit 1 - Channel Halted Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error Mask

pub fn stallmsk(&self) -> STALLMSK_R

Bit 3 - STALL Response Received Interrupt Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 4 - NAK Response Received Interrupt Mask

pub fn ackmsk(&self) -> ACKMSK_R

Bit 5 - ACK Response Received/Transmitted Interrupt Mask

pub fn xacterrmsk(&self) -> XACTERRMSK_R

Bit 7 - Transaction Error Mask

pub fn bblerrmsk(&self) -> BBLERRMSK_R

Bit 8 - Babble Error Mask

pub fn frmovrunmsk(&self) -> FRMOVRUNMSK_R

Bit 9 - Frame Overrun Mask

pub fn datatglerrmsk(&self) -> DATATGLERRMSK_R

Bit 10 - Data Toggle Error Mask

impl R<u8, PID_A>

pub fn variant(&self) -> PID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _HC8_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn pid(&self) -> PID_R

Bits 29:30 - The Application Programs This Field With the Type of

impl R<u32, Reg<u32, _HC8_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31 - DMA Address

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _HC9_CHAR>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn epnum(&self) -> EPNUM_R

Bits 11:14 - Endpoint Number

pub fn epdir(&self) -> EPDIR_R

Bit 15 - Endpoint Direction

pub fn lspddev(&self) -> LSPDDEV_R

Bit 17 - Low-Speed Device

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn mc(&self) -> MC_R

Bits 20:21 - Multi Count (MC) / Error Count

pub fn devaddr(&self) -> DEVADDR_R

Bits 22:28 - Device Address

pub fn oddfrm(&self) -> ODDFRM_R

Bit 29 - Odd Frame

pub fn chdis(&self) -> CHDIS_R

Bit 30 - Channel Disable

pub fn chena(&self) -> CHENA_R

Bit 31 - Channel Enable

impl R<u32, Reg<u32, _HC9_SPLT>>

pub fn prtaddr(&self) -> PRTADDR_R

Bits 0:6 - Port Address

pub fn hubaddr(&self) -> HUBADDR_R

Bits 7:13 - Hub Address

pub fn xactpos(&self) -> XACTPOS_R

Bits 14:15 - Transaction Position

pub fn compsplt(&self) -> COMPSPLT_R

Bit 16 - Do Complete Split

pub fn spltena(&self) -> SPLTENA_R

Bit 31 - Split Enable

impl R<u32, Reg<u32, _HC9_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed

pub fn chhltd(&self) -> CHHLTD_R

Bit 1 - Channel Halted

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn stall(&self) -> STALL_R

Bit 3 - STALL Response Received Interrupt

pub fn nak(&self) -> NAK_R

Bit 4 - NAK Response Received Interrupt

pub fn ack(&self) -> ACK_R

Bit 5 - ACK Response Received/Transmitted Interrupt

pub fn xacterr(&self) -> XACTERR_R

Bit 7 - Transaction Error

pub fn bblerr(&self) -> BBLERR_R

Bit 8 - Babble Error

pub fn frmovrun(&self) -> FRMOVRUN_R

Bit 9 - Frame Overrun

pub fn datatglerr(&self) -> DATATGLERR_R

Bit 10 - Data Toggle Error

impl R<u32, Reg<u32, _HC9_INTMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Mask

pub fn chhltdmsk(&self) -> CHHLTDMSK_R

Bit 1 - Channel Halted Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error Mask

pub fn stallmsk(&self) -> STALLMSK_R

Bit 3 - STALL Response Received Interrupt Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 4 - NAK Response Received Interrupt Mask

pub fn ackmsk(&self) -> ACKMSK_R

Bit 5 - ACK Response Received/Transmitted Interrupt Mask

pub fn xacterrmsk(&self) -> XACTERRMSK_R

Bit 7 - Transaction Error Mask

pub fn bblerrmsk(&self) -> BBLERRMSK_R

Bit 8 - Babble Error Mask

pub fn frmovrunmsk(&self) -> FRMOVRUNMSK_R

Bit 9 - Frame Overrun Mask

pub fn datatglerrmsk(&self) -> DATATGLERRMSK_R

Bit 10 - Data Toggle Error Mask

impl R<u8, PID_A>

pub fn variant(&self) -> PID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _HC9_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn pid(&self) -> PID_R

Bits 29:30 - The Application Programs This Field With the Type of

impl R<u32, Reg<u32, _HC9_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31 - DMA Address

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _HC10_CHAR>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn epnum(&self) -> EPNUM_R

Bits 11:14 - Endpoint Number

pub fn epdir(&self) -> EPDIR_R

Bit 15 - Endpoint Direction

pub fn lspddev(&self) -> LSPDDEV_R

Bit 17 - Low-Speed Device

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn mc(&self) -> MC_R

Bits 20:21 - Multi Count (MC) / Error Count

pub fn devaddr(&self) -> DEVADDR_R

Bits 22:28 - Device Address

pub fn oddfrm(&self) -> ODDFRM_R

Bit 29 - Odd Frame

pub fn chdis(&self) -> CHDIS_R

Bit 30 - Channel Disable

pub fn chena(&self) -> CHENA_R

Bit 31 - Channel Enable

impl R<u32, Reg<u32, _HC10_SPLT>>

pub fn prtaddr(&self) -> PRTADDR_R

Bits 0:6 - Port Address

pub fn hubaddr(&self) -> HUBADDR_R

Bits 7:13 - Hub Address

pub fn xactpos(&self) -> XACTPOS_R

Bits 14:15 - Transaction Position

pub fn compsplt(&self) -> COMPSPLT_R

Bit 16 - Do Complete Split

pub fn spltena(&self) -> SPLTENA_R

Bit 31 - Split Enable

impl R<u32, Reg<u32, _HC10_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed

pub fn chhltd(&self) -> CHHLTD_R

Bit 1 - Channel Halted

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn stall(&self) -> STALL_R

Bit 3 - STALL Response Received Interrupt

pub fn nak(&self) -> NAK_R

Bit 4 - NAK Response Received Interrupt

pub fn ack(&self) -> ACK_R

Bit 5 - ACK Response Received/Transmitted Interrupt

pub fn xacterr(&self) -> XACTERR_R

Bit 7 - Transaction Error

pub fn bblerr(&self) -> BBLERR_R

Bit 8 - Babble Error

pub fn frmovrun(&self) -> FRMOVRUN_R

Bit 9 - Frame Overrun

pub fn datatglerr(&self) -> DATATGLERR_R

Bit 10 - Data Toggle Error

impl R<u32, Reg<u32, _HC10_INTMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Mask

pub fn chhltdmsk(&self) -> CHHLTDMSK_R

Bit 1 - Channel Halted Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error Mask

pub fn stallmsk(&self) -> STALLMSK_R

Bit 3 - STALL Response Received Interrupt Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 4 - NAK Response Received Interrupt Mask

pub fn ackmsk(&self) -> ACKMSK_R

Bit 5 - ACK Response Received/Transmitted Interrupt Mask

pub fn xacterrmsk(&self) -> XACTERRMSK_R

Bit 7 - Transaction Error Mask

pub fn bblerrmsk(&self) -> BBLERRMSK_R

Bit 8 - Babble Error Mask

pub fn frmovrunmsk(&self) -> FRMOVRUNMSK_R

Bit 9 - Frame Overrun Mask

pub fn datatglerrmsk(&self) -> DATATGLERRMSK_R

Bit 10 - Data Toggle Error Mask

impl R<u8, PID_A>

pub fn variant(&self) -> PID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _HC10_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn pid(&self) -> PID_R

Bits 29:30 - The Application Programs This Field With the Type of

impl R<u32, Reg<u32, _HC10_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31 - DMA Address

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _HC11_CHAR>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn epnum(&self) -> EPNUM_R

Bits 11:14 - Endpoint Number

pub fn epdir(&self) -> EPDIR_R

Bit 15 - Endpoint Direction

pub fn lspddev(&self) -> LSPDDEV_R

Bit 17 - Low-Speed Device

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn mc(&self) -> MC_R

Bits 20:21 - Multi Count (MC) / Error Count

pub fn devaddr(&self) -> DEVADDR_R

Bits 22:28 - Device Address

pub fn oddfrm(&self) -> ODDFRM_R

Bit 29 - Odd Frame

pub fn chdis(&self) -> CHDIS_R

Bit 30 - Channel Disable

pub fn chena(&self) -> CHENA_R

Bit 31 - Channel Enable

impl R<u32, Reg<u32, _HC11_SPLT>>

pub fn prtaddr(&self) -> PRTADDR_R

Bits 0:6 - Port Address

pub fn hubaddr(&self) -> HUBADDR_R

Bits 7:13 - Hub Address

pub fn xactpos(&self) -> XACTPOS_R

Bits 14:15 - Transaction Position

pub fn compsplt(&self) -> COMPSPLT_R

Bit 16 - Do Complete Split

pub fn spltena(&self) -> SPLTENA_R

Bit 31 - Split Enable

impl R<u32, Reg<u32, _HC11_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed

pub fn chhltd(&self) -> CHHLTD_R

Bit 1 - Channel Halted

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn stall(&self) -> STALL_R

Bit 3 - STALL Response Received Interrupt

pub fn nak(&self) -> NAK_R

Bit 4 - NAK Response Received Interrupt

pub fn ack(&self) -> ACK_R

Bit 5 - ACK Response Received/Transmitted Interrupt

pub fn xacterr(&self) -> XACTERR_R

Bit 7 - Transaction Error

pub fn bblerr(&self) -> BBLERR_R

Bit 8 - Babble Error

pub fn frmovrun(&self) -> FRMOVRUN_R

Bit 9 - Frame Overrun

pub fn datatglerr(&self) -> DATATGLERR_R

Bit 10 - Data Toggle Error

impl R<u32, Reg<u32, _HC11_INTMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Mask

pub fn chhltdmsk(&self) -> CHHLTDMSK_R

Bit 1 - Channel Halted Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error Mask

pub fn stallmsk(&self) -> STALLMSK_R

Bit 3 - STALL Response Received Interrupt Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 4 - NAK Response Received Interrupt Mask

pub fn ackmsk(&self) -> ACKMSK_R

Bit 5 - ACK Response Received/Transmitted Interrupt Mask

pub fn xacterrmsk(&self) -> XACTERRMSK_R

Bit 7 - Transaction Error Mask

pub fn bblerrmsk(&self) -> BBLERRMSK_R

Bit 8 - Babble Error Mask

pub fn frmovrunmsk(&self) -> FRMOVRUNMSK_R

Bit 9 - Frame Overrun Mask

pub fn datatglerrmsk(&self) -> DATATGLERRMSK_R

Bit 10 - Data Toggle Error Mask

impl R<u8, PID_A>

pub fn variant(&self) -> PID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _HC11_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn pid(&self) -> PID_R

Bits 29:30 - The Application Programs This Field With the Type of

impl R<u32, Reg<u32, _HC11_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31 - DMA Address

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _HC12_CHAR>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn epnum(&self) -> EPNUM_R

Bits 11:14 - Endpoint Number

pub fn epdir(&self) -> EPDIR_R

Bit 15 - Endpoint Direction

pub fn lspddev(&self) -> LSPDDEV_R

Bit 17 - Low-Speed Device

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn mc(&self) -> MC_R

Bits 20:21 - Multi Count (MC) / Error Count

pub fn devaddr(&self) -> DEVADDR_R

Bits 22:28 - Device Address

pub fn oddfrm(&self) -> ODDFRM_R

Bit 29 - Odd Frame

pub fn chdis(&self) -> CHDIS_R

Bit 30 - Channel Disable

pub fn chena(&self) -> CHENA_R

Bit 31 - Channel Enable

impl R<u32, Reg<u32, _HC12_SPLT>>

pub fn prtaddr(&self) -> PRTADDR_R

Bits 0:6 - Port Address

pub fn hubaddr(&self) -> HUBADDR_R

Bits 7:13 - Hub Address

pub fn xactpos(&self) -> XACTPOS_R

Bits 14:15 - Transaction Position

pub fn compsplt(&self) -> COMPSPLT_R

Bit 16 - Do Complete Split

pub fn spltena(&self) -> SPLTENA_R

Bit 31 - Split Enable

impl R<u32, Reg<u32, _HC12_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed

pub fn chhltd(&self) -> CHHLTD_R

Bit 1 - Channel Halted

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn stall(&self) -> STALL_R

Bit 3 - STALL Response Received Interrupt

pub fn nak(&self) -> NAK_R

Bit 4 - NAK Response Received Interrupt

pub fn ack(&self) -> ACK_R

Bit 5 - ACK Response Received/Transmitted Interrupt

pub fn xacterr(&self) -> XACTERR_R

Bit 7 - Transaction Error

pub fn bblerr(&self) -> BBLERR_R

Bit 8 - Babble Error

pub fn frmovrun(&self) -> FRMOVRUN_R

Bit 9 - Frame Overrun

pub fn datatglerr(&self) -> DATATGLERR_R

Bit 10 - Data Toggle Error

impl R<u32, Reg<u32, _HC12_INTMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Mask

pub fn chhltdmsk(&self) -> CHHLTDMSK_R

Bit 1 - Channel Halted Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error Mask

pub fn stallmsk(&self) -> STALLMSK_R

Bit 3 - STALL Response Received Interrupt Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 4 - NAK Response Received Interrupt Mask

pub fn ackmsk(&self) -> ACKMSK_R

Bit 5 - ACK Response Received/Transmitted Interrupt Mask

pub fn xacterrmsk(&self) -> XACTERRMSK_R

Bit 7 - Transaction Error Mask

pub fn bblerrmsk(&self) -> BBLERRMSK_R

Bit 8 - Babble Error Mask

pub fn frmovrunmsk(&self) -> FRMOVRUNMSK_R

Bit 9 - Frame Overrun Mask

pub fn datatglerrmsk(&self) -> DATATGLERRMSK_R

Bit 10 - Data Toggle Error Mask

impl R<u8, PID_A>

pub fn variant(&self) -> PID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _HC12_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn pid(&self) -> PID_R

Bits 29:30 - The Application Programs This Field With the Type of

impl R<u32, Reg<u32, _HC12_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31 - DMA Address

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _HC13_CHAR>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn epnum(&self) -> EPNUM_R

Bits 11:14 - Endpoint Number

pub fn epdir(&self) -> EPDIR_R

Bit 15 - Endpoint Direction

pub fn lspddev(&self) -> LSPDDEV_R

Bit 17 - Low-Speed Device

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn mc(&self) -> MC_R

Bits 20:21 - Multi Count (MC) / Error Count

pub fn devaddr(&self) -> DEVADDR_R

Bits 22:28 - Device Address

pub fn oddfrm(&self) -> ODDFRM_R

Bit 29 - Odd Frame

pub fn chdis(&self) -> CHDIS_R

Bit 30 - Channel Disable

pub fn chena(&self) -> CHENA_R

Bit 31 - Channel Enable

impl R<u32, Reg<u32, _HC13_SPLT>>

pub fn prtaddr(&self) -> PRTADDR_R

Bits 0:6 - Port Address

pub fn hubaddr(&self) -> HUBADDR_R

Bits 7:13 - Hub Address

pub fn xactpos(&self) -> XACTPOS_R

Bits 14:15 - Transaction Position

pub fn compsplt(&self) -> COMPSPLT_R

Bit 16 - Do Complete Split

pub fn spltena(&self) -> SPLTENA_R

Bit 31 - Split Enable

impl R<u32, Reg<u32, _HC13_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed

pub fn chhltd(&self) -> CHHLTD_R

Bit 1 - Channel Halted

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn stall(&self) -> STALL_R

Bit 3 - STALL Response Received Interrupt

pub fn nak(&self) -> NAK_R

Bit 4 - NAK Response Received Interrupt

pub fn ack(&self) -> ACK_R

Bit 5 - ACK Response Received/Transmitted Interrupt

pub fn xacterr(&self) -> XACTERR_R

Bit 7 - Transaction Error

pub fn bblerr(&self) -> BBLERR_R

Bit 8 - Babble Error

pub fn frmovrun(&self) -> FRMOVRUN_R

Bit 9 - Frame Overrun

pub fn datatglerr(&self) -> DATATGLERR_R

Bit 10 - Data Toggle Error

impl R<u32, Reg<u32, _HC13_INTMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Mask

pub fn chhltdmsk(&self) -> CHHLTDMSK_R

Bit 1 - Channel Halted Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error Mask

pub fn stallmsk(&self) -> STALLMSK_R

Bit 3 - STALL Response Received Interrupt Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 4 - NAK Response Received Interrupt Mask

pub fn ackmsk(&self) -> ACKMSK_R

Bit 5 - ACK Response Received/Transmitted Interrupt Mask

pub fn xacterrmsk(&self) -> XACTERRMSK_R

Bit 7 - Transaction Error Mask

pub fn bblerrmsk(&self) -> BBLERRMSK_R

Bit 8 - Babble Error Mask

pub fn frmovrunmsk(&self) -> FRMOVRUNMSK_R

Bit 9 - Frame Overrun Mask

pub fn datatglerrmsk(&self) -> DATATGLERRMSK_R

Bit 10 - Data Toggle Error Mask

impl R<u8, PID_A>

pub fn variant(&self) -> PID_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _HC13_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn pid(&self) -> PID_R

Bits 29:30 - The Application Programs This Field With the Type of

impl R<u32, Reg<u32, _HC13_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31 - DMA Address

impl R<u8, DEVSPD_A>

pub fn variant(&self) -> Variant<u8, DEVSPD_A>

Get enumerated values variant

pub fn is_ls(&self) -> bool

Checks if the value of the field is LS

pub fn is_fs(&self) -> bool

Checks if the value of the field is FS

impl R<u8, PERFRINT_A>

pub fn variant(&self) -> PERFRINT_A

Get enumerated values variant

pub fn is_80pcnt(&self) -> bool

Checks if the value of the field is _80PCNT

pub fn is_85pcnt(&self) -> bool

Checks if the value of the field is _85PCNT

pub fn is_90pcnt(&self) -> bool

Checks if the value of the field is _90PCNT

pub fn is_95pcnt(&self) -> bool

Checks if the value of the field is _95PCNT

impl R<u32, Reg<u32, _DCFG>>

pub fn devspd(&self) -> DEVSPD_R

Bits 0:1 - Device Speed

pub fn nzstsouthshk(&self) -> NZSTSOUTHSHK_R

Bit 2 - Non-Zero-Length Status OUT Handshake

pub fn ena32khzsusp(&self) -> ENA32KHZSUSP_R

Bit 3 - Enable 32 kHz Suspend Mode

pub fn devaddr(&self) -> DEVADDR_R

Bits 4:10 - Device Address

pub fn perfrint(&self) -> PERFRINT_R

Bits 11:12 - Periodic Frame Interval

pub fn endevoutnak(&self) -> ENDEVOUTNAK_R

Bit 13 - Enable Device OUT NAK

pub fn xcvrdly(&self) -> XCVRDLY_R

Bit 14

pub fn erraticintmsk(&self) -> ERRATICINTMSK_R

Bit 15

pub fn resvalid(&self) -> RESVALID_R

Bits 26:31 - Resume Validation Period

impl R<u8, TSTCTL_A>

pub fn variant(&self) -> Variant<u8, TSTCTL_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_j(&self) -> bool

Checks if the value of the field is J

pub fn is_k(&self) -> bool

Checks if the value of the field is K

pub fn is_se0nak(&self) -> bool

Checks if the value of the field is SE0NAK

pub fn is_packet(&self) -> bool

Checks if the value of the field is PACKET

pub fn is_force(&self) -> bool

Checks if the value of the field is FORCE

impl R<u32, Reg<u32, _DCTL>>

pub fn rmtwkupsig(&self) -> RMTWKUPSIG_R

Bit 0 - Remote Wakeup Signaling

pub fn sftdiscon(&self) -> SFTDISCON_R

Bit 1 - Soft Disconnect

pub fn gnpinnaksts(&self) -> GNPINNAKSTS_R

Bit 2 - Global Non-periodic IN NAK Status

pub fn goutnaksts(&self) -> GOUTNAKSTS_R

Bit 3 - Global OUT NAK Status

pub fn tstctl(&self) -> TSTCTL_R

Bits 4:6 - Test Control

pub fn pwronprgdone(&self) -> PWRONPRGDONE_R

Bit 11 - Power-On Programming Done

pub fn ignrfrmnum(&self) -> IGNRFRMNUM_R

Bit 15 - Ignore Frame number For Isochronous End points

pub fn nakonbble(&self) -> NAKONBBLE_R

Bit 16 - NAK on Babble Error

impl R<u8, ENUMSPD_A>

pub fn variant(&self) -> Variant<u8, ENUMSPD_A>

Get enumerated values variant

pub fn is_ls(&self) -> bool

Checks if the value of the field is LS

pub fn is_fs(&self) -> bool

Checks if the value of the field is FS

impl R<u32, Reg<u32, _DSTS>>

pub fn suspsts(&self) -> SUSPSTS_R

Bit 0 - Suspend Status

pub fn enumspd(&self) -> ENUMSPD_R

Bits 1:2 - Enumerated Speed

pub fn errticerr(&self) -> ERRTICERR_R

Bit 3 - Erratic Error

pub fn soffn(&self) -> SOFFN_R

Bits 8:21 - Frame Number of the Received SOF

pub fn devlnsts(&self) -> DEVLNSTS_R

Bits 22:23 - Device Line Status

impl R<u32, Reg<u32, _DIEPMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Interrupt Mask

pub fn epdisbldmsk(&self) -> EPDISBLDMSK_R

Bit 1 - Endpoint Disabled Interrupt Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error Mask

pub fn timeoutmsk(&self) -> TIMEOUTMSK_R

Bit 3 - Timeout Condition Mask

pub fn intkntxfempmsk(&self) -> INTKNTXFEMPMSK_R

Bit 4 - IN Token Received When TxFIFO Empty Mask

pub fn intknepmismsk(&self) -> INTKNEPMISMSK_R

Bit 5 - IN Token received with EP Mismatch Mask

pub fn inepnakeffmsk(&self) -> INEPNAKEFFMSK_R

Bit 6 - IN Endpoint NAK Effective Mask

pub fn txfifoundrnmsk(&self) -> TXFIFOUNDRNMSK_R

Bit 8 - Fifo Underrun Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 13 - NAK interrupt Mask

impl R<u32, Reg<u32, _DOEPMSK>>

pub fn xfercomplmsk(&self) -> XFERCOMPLMSK_R

Bit 0 - Transfer Completed Interrupt Mask

pub fn epdisbldmsk(&self) -> EPDISBLDMSK_R

Bit 1 - Endpoint Disabled Interrupt Mask

pub fn ahberrmsk(&self) -> AHBERRMSK_R

Bit 2 - AHB Error

pub fn setupmsk(&self) -> SETUPMSK_R

Bit 3 - SETUP Phase Done Mask

pub fn outtknepdismsk(&self) -> OUTTKNEPDISMSK_R

Bit 4 - OUT Token Received when Endpoint Disabled Mask

pub fn stsphsercvdmsk(&self) -> STSPHSERCVDMSK_R

Bit 5 - Status Phase Received Mask

pub fn back2backsetup(&self) -> BACK2BACKSETUP_R

Bit 6 - Back-to-Back SETUP Packets Received Mask

pub fn outpkterrmsk(&self) -> OUTPKTERRMSK_R

Bit 8 - OUT Packet Error Mask

pub fn bbleerrmsk(&self) -> BBLEERRMSK_R

Bit 12 - Babble Error interrupt Mask

pub fn nakmsk(&self) -> NAKMSK_R

Bit 13 - NAK interrupt Mask

impl R<u32, Reg<u32, _DAINT>>

pub fn inepint0(&self) -> INEPINT0_R

Bit 0 - IN Endpoint 0 Interrupt Bit

pub fn inepint1(&self) -> INEPINT1_R

Bit 1 - IN Endpoint 1 Interrupt Bit

pub fn inepint2(&self) -> INEPINT2_R

Bit 2 - IN Endpoint 2 Interrupt Bit

pub fn inepint3(&self) -> INEPINT3_R

Bit 3 - IN Endpoint 3 Interrupt Bit

pub fn inepint4(&self) -> INEPINT4_R

Bit 4 - IN Endpoint 4 Interrupt Bit

pub fn inepint5(&self) -> INEPINT5_R

Bit 5 - IN Endpoint 5 Interrupt Bit

pub fn inepint6(&self) -> INEPINT6_R

Bit 6 - IN Endpoint 6 Interrupt Bit

pub fn outepint0(&self) -> OUTEPINT0_R

Bit 16 - OUT Endpoint 0 Interrupt Bit

pub fn outepint1(&self) -> OUTEPINT1_R

Bit 17 - OUT Endpoint 1 Interrupt Bit

pub fn outepint2(&self) -> OUTEPINT2_R

Bit 18 - OUT Endpoint 2 Interrupt Bit

pub fn outepint3(&self) -> OUTEPINT3_R

Bit 19 - OUT Endpoint 3 Interrupt Bit

pub fn outepint4(&self) -> OUTEPINT4_R

Bit 20 - OUT Endpoint 4 Interrupt Bit

pub fn outepint5(&self) -> OUTEPINT5_R

Bit 21 - OUT Endpoint 5 Interrupt Bit

pub fn outepint6(&self) -> OUTEPINT6_R

Bit 22 - OUT Endpoint 6 Interrupt Bit

impl R<u32, Reg<u32, _DAINTMSK>>

pub fn inepmsk0(&self) -> INEPMSK0_R

Bit 0 - IN Endpoint 0 Interrupt mask Bit

pub fn inepmsk1(&self) -> INEPMSK1_R

Bit 1 - IN Endpoint 1 Interrupt mask Bit

pub fn inepmsk2(&self) -> INEPMSK2_R

Bit 2 - IN Endpoint 2 Interrupt mask Bit

pub fn inepmsk3(&self) -> INEPMSK3_R

Bit 3 - IN Endpoint 3 Interrupt mask Bit

pub fn inepmsk4(&self) -> INEPMSK4_R

Bit 4 - IN Endpoint 4 Interrupt mask Bit

pub fn inepmsk5(&self) -> INEPMSK5_R

Bit 5 - IN Endpoint 5 Interrupt mask Bit

pub fn inepmsk6(&self) -> INEPMSK6_R

Bit 6 - IN Endpoint 6 Interrupt mask Bit

pub fn outepmsk0(&self) -> OUTEPMSK0_R

Bit 16 - OUT Endpoint 0 Interrupt mask Bit

pub fn outepmsk1(&self) -> OUTEPMSK1_R

Bit 17 - OUT Endpoint 1 Interrupt mask Bit

pub fn outepmsk2(&self) -> OUTEPMSK2_R

Bit 18 - OUT Endpoint 2 Interrupt mask Bit

pub fn outepmsk3(&self) -> OUTEPMSK3_R

Bit 19 - OUT Endpoint 3 Interrupt mask Bit

pub fn outepmsk4(&self) -> OUTEPMSK4_R

Bit 20 - OUT Endpoint 4 Interrupt mask Bit

pub fn outepmsk5(&self) -> OUTEPMSK5_R

Bit 21 - OUT Endpoint 5 Interrupt mask Bit

pub fn outepmsk6(&self) -> OUTEPMSK6_R

Bit 22 - OUT Endpoint 6 Interrupt mask Bit

impl R<u32, Reg<u32, _DVBUSDIS>>

pub fn dvbusdis(&self) -> DVBUSDIS_R

Bits 0:15 - Device VBUS Discharge Time

impl R<u32, Reg<u32, _DVBUSPULSE>>

pub fn dvbuspulse(&self) -> DVBUSPULSE_R

Bits 0:11 - Device VBUS Pulsing Time

impl R<u8, AHBTHRRATIO_A>

pub fn variant(&self) -> AHBTHRRATIO_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

impl R<u32, Reg<u32, _DTHRCTL>>

pub fn nonisothren(&self) -> NONISOTHREN_R

Bit 0 - Non-ISO IN Endpoints Threshold Enable

pub fn isothren(&self) -> ISOTHREN_R

Bit 1 - ISO IN Endpoints Threshold Enable

pub fn txthrlen(&self) -> TXTHRLEN_R

Bits 2:10 - Transmit Threshold Length

pub fn ahbthrratio(&self) -> AHBTHRRATIO_R

Bits 11:12 - AHB Threshold Ratio

pub fn rxthren(&self) -> RXTHREN_R

Bit 16 - Receive Threshold Enable

pub fn rxthrlen(&self) -> RXTHRLEN_R

Bits 17:25 - Receive Threshold Length

pub fn arbprken(&self) -> ARBPRKEN_R

Bit 27 - Arbiter Parking Enable

impl R<u32, Reg<u32, _DIEPEMPMSK>>

pub fn ineptxfempmsk(&self) -> INEPTXFEMPMSK_R

Bits 0:15 - IN EP Tx FIFO Empty Interrupt Mask Bits

impl R<u8, MPS_A>

pub fn variant(&self) -> MPS_A

Get enumerated values variant

pub fn is_64b(&self) -> bool

Checks if the value of the field is _64B

pub fn is_32b(&self) -> bool

Checks if the value of the field is _32B

pub fn is_16b(&self) -> bool

Checks if the value of the field is _16B

pub fn is_8b(&self) -> bool

Checks if the value of the field is _8B

impl R<u32, Reg<u32, _DIEP0CTL>>

pub fn mps(&self) -> MPS_R

Bits 0:1 - Maximum Packet Size

pub fn usbactep(&self) -> USBACTEP_R

Bit 15 - USB Active Endpoint

pub fn naksts(&self) -> NAKSTS_R

Bit 17 - NAK Status

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn stall(&self) -> STALL_R

Bit 21 - Handshake

pub fn txfnum(&self) -> TXFNUM_R

Bits 22:25 - TxFIFO Number

pub fn epdis(&self) -> EPDIS_R

Bit 30 - Endpoint Disable

pub fn epena(&self) -> EPENA_R

Bit 31 - Endpoint Enable

impl R<u32, Reg<u32, _DIEP0INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed Interrupt

pub fn epdisbld(&self) -> EPDISBLD_R

Bit 1 - Endpoint Disabled Interrupt

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn timeout(&self) -> TIMEOUT_R

Bit 3 - Timeout Condition

pub fn intkntxfemp(&self) -> INTKNTXFEMP_R

Bit 4 - IN Token Received When TxFIFO is Empty

pub fn intknepmis(&self) -> INTKNEPMIS_R

Bit 5 - IN Token Received with EP Mismatch

pub fn inepnakeff(&self) -> INEPNAKEFF_R

Bit 6 - IN Endpoint NAK Effective

pub fn txfemp(&self) -> TXFEMP_R

Bit 7 - Transmit FIFO Empty

pub fn txfifoundrn(&self) -> TXFIFOUNDRN_R

Bit 8 - Fifo Underrun

pub fn pktdrpsts(&self) -> PKTDRPSTS_R

Bit 11 - Packet Drop Status

pub fn bbleerr(&self) -> BBLEERR_R

Bit 12 - Babble Interrupt

pub fn nakintrpt(&self) -> NAKINTRPT_R

Bit 13 - NAK Interrupt

impl R<u32, Reg<u32, _DIEP0TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:6 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:20 - Packet Count

impl R<u32, Reg<u32, _DIEP0DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31

impl R<u32, Reg<u32, _DIEP0TXFSTS>>

pub fn spcavail(&self) -> SPCAVAIL_R

Bits 0:15 - IN Endpoint TxFIFO Space Avail

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _DIEP0_CTL>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn usbactep(&self) -> USBACTEP_R

Bit 15 - USB Active Endpoint

pub fn dpideof(&self) -> DPIDEOF_R

Bit 16 - Endpoint Data PID / Even or Odd Frame

pub fn naksts(&self) -> NAKSTS_R

Bit 17 - NAK Status

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn stall(&self) -> STALL_R

Bit 21 - Handshake

pub fn txfnum(&self) -> TXFNUM_R

Bits 22:25 - TxFIFO Number

pub fn epdis(&self) -> EPDIS_R

Bit 30 - Endpoint Disable

pub fn epena(&self) -> EPENA_R

Bit 31 - Endpoint Enable

impl R<u32, Reg<u32, _DIEP0_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed Interrupt

pub fn epdisbld(&self) -> EPDISBLD_R

Bit 1 - Endpoint Disabled Interrupt

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn timeout(&self) -> TIMEOUT_R

Bit 3 - Timeout Condition

pub fn intkntxfemp(&self) -> INTKNTXFEMP_R

Bit 4 - IN Token Received When TxFIFO is Empty

pub fn intknepmis(&self) -> INTKNEPMIS_R

Bit 5 - IN Token Received with EP Mismatch

pub fn inepnakeff(&self) -> INEPNAKEFF_R

Bit 6 - IN Endpoint NAK Effective

pub fn txfemp(&self) -> TXFEMP_R

Bit 7 - Transmit FIFO Empty

pub fn txfifoundrn(&self) -> TXFIFOUNDRN_R

Bit 8 - Fifo Underrun

pub fn pktdrpsts(&self) -> PKTDRPSTS_R

Bit 11 - Packet Drop Status

pub fn bbleerr(&self) -> BBLEERR_R

Bit 12 - Babble Interrupt

pub fn nakintrpt(&self) -> NAKINTRPT_R

Bit 13 - NAK Interrupt

impl R<u32, Reg<u32, _DIEP0_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn mc(&self) -> MC_R

Bits 29:30 - Multi Count

impl R<u32, Reg<u32, _DIEP0_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31

impl R<u32, Reg<u32, _DIEP0_DTXFSTS>>

pub fn spcavail(&self) -> SPCAVAIL_R

Bits 0:15 - IN Endpoint TxFIFO Space Avail

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _DIEP1_CTL>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn usbactep(&self) -> USBACTEP_R

Bit 15 - USB Active Endpoint

pub fn dpideof(&self) -> DPIDEOF_R

Bit 16 - Endpoint Data PID / Even or Odd Frame

pub fn naksts(&self) -> NAKSTS_R

Bit 17 - NAK Status

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn stall(&self) -> STALL_R

Bit 21 - Handshake

pub fn txfnum(&self) -> TXFNUM_R

Bits 22:25 - TxFIFO Number

pub fn epdis(&self) -> EPDIS_R

Bit 30 - Endpoint Disable

pub fn epena(&self) -> EPENA_R

Bit 31 - Endpoint Enable

impl R<u32, Reg<u32, _DIEP1_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed Interrupt

pub fn epdisbld(&self) -> EPDISBLD_R

Bit 1 - Endpoint Disabled Interrupt

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn timeout(&self) -> TIMEOUT_R

Bit 3 - Timeout Condition

pub fn intkntxfemp(&self) -> INTKNTXFEMP_R

Bit 4 - IN Token Received When TxFIFO is Empty

pub fn intknepmis(&self) -> INTKNEPMIS_R

Bit 5 - IN Token Received with EP Mismatch

pub fn inepnakeff(&self) -> INEPNAKEFF_R

Bit 6 - IN Endpoint NAK Effective

pub fn txfemp(&self) -> TXFEMP_R

Bit 7 - Transmit FIFO Empty

pub fn txfifoundrn(&self) -> TXFIFOUNDRN_R

Bit 8 - Fifo Underrun

pub fn pktdrpsts(&self) -> PKTDRPSTS_R

Bit 11 - Packet Drop Status

pub fn bbleerr(&self) -> BBLEERR_R

Bit 12 - Babble Interrupt

pub fn nakintrpt(&self) -> NAKINTRPT_R

Bit 13 - NAK Interrupt

impl R<u32, Reg<u32, _DIEP1_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn mc(&self) -> MC_R

Bits 29:30 - Multi Count

impl R<u32, Reg<u32, _DIEP1_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31

impl R<u32, Reg<u32, _DIEP1_DTXFSTS>>

pub fn spcavail(&self) -> SPCAVAIL_R

Bits 0:15 - IN Endpoint TxFIFO Space Avail

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _DIEP2_CTL>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn usbactep(&self) -> USBACTEP_R

Bit 15 - USB Active Endpoint

pub fn dpideof(&self) -> DPIDEOF_R

Bit 16 - Endpoint Data PID / Even or Odd Frame

pub fn naksts(&self) -> NAKSTS_R

Bit 17 - NAK Status

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn stall(&self) -> STALL_R

Bit 21 - Handshake

pub fn txfnum(&self) -> TXFNUM_R

Bits 22:25 - TxFIFO Number

pub fn epdis(&self) -> EPDIS_R

Bit 30 - Endpoint Disable

pub fn epena(&self) -> EPENA_R

Bit 31 - Endpoint Enable

impl R<u32, Reg<u32, _DIEP2_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed Interrupt

pub fn epdisbld(&self) -> EPDISBLD_R

Bit 1 - Endpoint Disabled Interrupt

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn timeout(&self) -> TIMEOUT_R

Bit 3 - Timeout Condition

pub fn intkntxfemp(&self) -> INTKNTXFEMP_R

Bit 4 - IN Token Received When TxFIFO is Empty

pub fn intknepmis(&self) -> INTKNEPMIS_R

Bit 5 - IN Token Received with EP Mismatch

pub fn inepnakeff(&self) -> INEPNAKEFF_R

Bit 6 - IN Endpoint NAK Effective

pub fn txfemp(&self) -> TXFEMP_R

Bit 7 - Transmit FIFO Empty

pub fn txfifoundrn(&self) -> TXFIFOUNDRN_R

Bit 8 - Fifo Underrun

pub fn pktdrpsts(&self) -> PKTDRPSTS_R

Bit 11 - Packet Drop Status

pub fn bbleerr(&self) -> BBLEERR_R

Bit 12 - Babble Interrupt

pub fn nakintrpt(&self) -> NAKINTRPT_R

Bit 13 - NAK Interrupt

impl R<u32, Reg<u32, _DIEP2_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn mc(&self) -> MC_R

Bits 29:30 - Multi Count

impl R<u32, Reg<u32, _DIEP2_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31

impl R<u32, Reg<u32, _DIEP2_DTXFSTS>>

pub fn spcavail(&self) -> SPCAVAIL_R

Bits 0:15 - IN Endpoint TxFIFO Space Avail

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _DIEP3_CTL>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn usbactep(&self) -> USBACTEP_R

Bit 15 - USB Active Endpoint

pub fn dpideof(&self) -> DPIDEOF_R

Bit 16 - Endpoint Data PID / Even or Odd Frame

pub fn naksts(&self) -> NAKSTS_R

Bit 17 - NAK Status

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn stall(&self) -> STALL_R

Bit 21 - Handshake

pub fn txfnum(&self) -> TXFNUM_R

Bits 22:25 - TxFIFO Number

pub fn epdis(&self) -> EPDIS_R

Bit 30 - Endpoint Disable

pub fn epena(&self) -> EPENA_R

Bit 31 - Endpoint Enable

impl R<u32, Reg<u32, _DIEP3_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed Interrupt

pub fn epdisbld(&self) -> EPDISBLD_R

Bit 1 - Endpoint Disabled Interrupt

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn timeout(&self) -> TIMEOUT_R

Bit 3 - Timeout Condition

pub fn intkntxfemp(&self) -> INTKNTXFEMP_R

Bit 4 - IN Token Received When TxFIFO is Empty

pub fn intknepmis(&self) -> INTKNEPMIS_R

Bit 5 - IN Token Received with EP Mismatch

pub fn inepnakeff(&self) -> INEPNAKEFF_R

Bit 6 - IN Endpoint NAK Effective

pub fn txfemp(&self) -> TXFEMP_R

Bit 7 - Transmit FIFO Empty

pub fn txfifoundrn(&self) -> TXFIFOUNDRN_R

Bit 8 - Fifo Underrun

pub fn pktdrpsts(&self) -> PKTDRPSTS_R

Bit 11 - Packet Drop Status

pub fn bbleerr(&self) -> BBLEERR_R

Bit 12 - Babble Interrupt

pub fn nakintrpt(&self) -> NAKINTRPT_R

Bit 13 - NAK Interrupt

impl R<u32, Reg<u32, _DIEP3_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn mc(&self) -> MC_R

Bits 29:30 - Multi Count

impl R<u32, Reg<u32, _DIEP3_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31

impl R<u32, Reg<u32, _DIEP3_DTXFSTS>>

pub fn spcavail(&self) -> SPCAVAIL_R

Bits 0:15 - IN Endpoint TxFIFO Space Avail

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _DIEP4_CTL>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn usbactep(&self) -> USBACTEP_R

Bit 15 - USB Active Endpoint

pub fn dpideof(&self) -> DPIDEOF_R

Bit 16 - Endpoint Data PID / Even or Odd Frame

pub fn naksts(&self) -> NAKSTS_R

Bit 17 - NAK Status

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn stall(&self) -> STALL_R

Bit 21 - Handshake

pub fn txfnum(&self) -> TXFNUM_R

Bits 22:25 - TxFIFO Number

pub fn epdis(&self) -> EPDIS_R

Bit 30 - Endpoint Disable

pub fn epena(&self) -> EPENA_R

Bit 31 - Endpoint Enable

impl R<u32, Reg<u32, _DIEP4_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed Interrupt

pub fn epdisbld(&self) -> EPDISBLD_R

Bit 1 - Endpoint Disabled Interrupt

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn timeout(&self) -> TIMEOUT_R

Bit 3 - Timeout Condition

pub fn intkntxfemp(&self) -> INTKNTXFEMP_R

Bit 4 - IN Token Received When TxFIFO is Empty

pub fn intknepmis(&self) -> INTKNEPMIS_R

Bit 5 - IN Token Received with EP Mismatch

pub fn inepnakeff(&self) -> INEPNAKEFF_R

Bit 6 - IN Endpoint NAK Effective

pub fn txfemp(&self) -> TXFEMP_R

Bit 7 - Transmit FIFO Empty

pub fn txfifoundrn(&self) -> TXFIFOUNDRN_R

Bit 8 - Fifo Underrun

pub fn pktdrpsts(&self) -> PKTDRPSTS_R

Bit 11 - Packet Drop Status

pub fn bbleerr(&self) -> BBLEERR_R

Bit 12 - Babble Interrupt

pub fn nakintrpt(&self) -> NAKINTRPT_R

Bit 13 - NAK Interrupt

impl R<u32, Reg<u32, _DIEP4_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn mc(&self) -> MC_R

Bits 29:30 - Multi Count

impl R<u32, Reg<u32, _DIEP4_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31

impl R<u32, Reg<u32, _DIEP4_DTXFSTS>>

pub fn spcavail(&self) -> SPCAVAIL_R

Bits 0:15 - IN Endpoint TxFIFO Space Avail

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _DIEP5_CTL>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn usbactep(&self) -> USBACTEP_R

Bit 15 - USB Active Endpoint

pub fn dpideof(&self) -> DPIDEOF_R

Bit 16 - Endpoint Data PID / Even or Odd Frame

pub fn naksts(&self) -> NAKSTS_R

Bit 17 - NAK Status

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn stall(&self) -> STALL_R

Bit 21 - Handshake

pub fn txfnum(&self) -> TXFNUM_R

Bits 22:25 - TxFIFO Number

pub fn epdis(&self) -> EPDIS_R

Bit 30 - Endpoint Disable

pub fn epena(&self) -> EPENA_R

Bit 31 - Endpoint Enable

impl R<u32, Reg<u32, _DIEP5_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed Interrupt

pub fn epdisbld(&self) -> EPDISBLD_R

Bit 1 - Endpoint Disabled Interrupt

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn timeout(&self) -> TIMEOUT_R

Bit 3 - Timeout Condition

pub fn intkntxfemp(&self) -> INTKNTXFEMP_R

Bit 4 - IN Token Received When TxFIFO is Empty

pub fn intknepmis(&self) -> INTKNEPMIS_R

Bit 5 - IN Token Received with EP Mismatch

pub fn inepnakeff(&self) -> INEPNAKEFF_R

Bit 6 - IN Endpoint NAK Effective

pub fn txfemp(&self) -> TXFEMP_R

Bit 7 - Transmit FIFO Empty

pub fn txfifoundrn(&self) -> TXFIFOUNDRN_R

Bit 8 - Fifo Underrun

pub fn pktdrpsts(&self) -> PKTDRPSTS_R

Bit 11 - Packet Drop Status

pub fn bbleerr(&self) -> BBLEERR_R

Bit 12 - Babble Interrupt

pub fn nakintrpt(&self) -> NAKINTRPT_R

Bit 13 - NAK Interrupt

impl R<u32, Reg<u32, _DIEP5_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn mc(&self) -> MC_R

Bits 29:30 - Multi Count

impl R<u32, Reg<u32, _DIEP5_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31

impl R<u32, Reg<u32, _DIEP5_DTXFSTS>>

pub fn spcavail(&self) -> SPCAVAIL_R

Bits 0:15 - IN Endpoint TxFIFO Space Avail

impl R<u8, MPS_A>

pub fn variant(&self) -> MPS_A

Get enumerated values variant

pub fn is_64b(&self) -> bool

Checks if the value of the field is _64B

pub fn is_32b(&self) -> bool

Checks if the value of the field is _32B

pub fn is_16b(&self) -> bool

Checks if the value of the field is _16B

pub fn is_8b(&self) -> bool

Checks if the value of the field is _8B

impl R<u32, Reg<u32, _DOEP0CTL>>

pub fn mps(&self) -> MPS_R

Bits 0:1 - Maximum Packet Size

pub fn usbactep(&self) -> USBACTEP_R

Bit 15 - USB Active Endpoint

pub fn naksts(&self) -> NAKSTS_R

Bit 17 - NAK Status

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn snp(&self) -> SNP_R

Bit 20 - Snoop Mode

pub fn stall(&self) -> STALL_R

Bit 21 - Handshake

pub fn epdis(&self) -> EPDIS_R

Bit 30 - Endpoint Disable

pub fn epena(&self) -> EPENA_R

Bit 31 - Endpoint Enable

impl R<u32, Reg<u32, _DOEP0INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed Interrupt

pub fn epdisbld(&self) -> EPDISBLD_R

Bit 1 - Endpoint Disabled Interrupt

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn setup(&self) -> SETUP_R

Bit 3 - Setup Phase Done

pub fn outtknepdis(&self) -> OUTTKNEPDIS_R

Bit 4 - OUT Token Received When Endpoint Disabled

pub fn stsphsercvd(&self) -> STSPHSERCVD_R

Bit 5 - Status Phase Received For Control Write

pub fn back2backsetup(&self) -> BACK2BACKSETUP_R

Bit 6 - Back-to-Back SETUP Packets Received

pub fn outpkterr(&self) -> OUTPKTERR_R

Bit 8 - OUT Packet Error

pub fn pktdrpsts(&self) -> PKTDRPSTS_R

Bit 11 - Packet Drop Status

pub fn bbleerr(&self) -> BBLEERR_R

Bit 12 - NAK Interrupt

pub fn nakintrpt(&self) -> NAKINTRPT_R

Bit 13 - NAK Interrupt

pub fn stuppktrcvd(&self) -> STUPPKTRCVD_R

Bit 15

impl R<u32, Reg<u32, _DOEP0TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:6 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bit 19 - Packet Count

pub fn supcnt(&self) -> SUPCNT_R

Bits 29:30 - SETUP Packet Count

impl R<u32, Reg<u32, _DOEP0DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _DOEP0_CTL>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn usbactep(&self) -> USBACTEP_R

Bit 15 - USB Active Endpoint

pub fn dpideof(&self) -> DPIDEOF_R

Bit 16 - Endpoint Data PID / Even-odd Frame

pub fn naksts(&self) -> NAKSTS_R

Bit 17 - NAK Status

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn snp(&self) -> SNP_R

Bit 20 - Snoop Mode

pub fn stall(&self) -> STALL_R

Bit 21 - STALL Handshake

pub fn epdis(&self) -> EPDIS_R

Bit 30 - Endpoint Disable

pub fn epena(&self) -> EPENA_R

Bit 31 - Endpoint Enable

impl R<u32, Reg<u32, _DOEP0_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed Interrupt

pub fn epdisbld(&self) -> EPDISBLD_R

Bit 1 - Endpoint Disabled Interrupt

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn setup(&self) -> SETUP_R

Bit 3 - Setup Phase Done

pub fn outtknepdis(&self) -> OUTTKNEPDIS_R

Bit 4 - OUT Token Received When Endpoint Disabled

pub fn stsphsercvd(&self) -> STSPHSERCVD_R

Bit 5 - Status Phase Received For Control Write

pub fn back2backsetup(&self) -> BACK2BACKSETUP_R

Bit 6 - Back-to-Back SETUP Packets Received

pub fn outpkterr(&self) -> OUTPKTERR_R

Bit 8 - OUT Packet Error

pub fn pktdrpsts(&self) -> PKTDRPSTS_R

Bit 11 - Packet Drop Status

pub fn bbleerr(&self) -> BBLEERR_R

Bit 12 - Babble Error

pub fn nakintrpt(&self) -> NAKINTRPT_R

Bit 13 - NAK Interrupt

pub fn stuppktrcvd(&self) -> STUPPKTRCVD_R

Bit 15

impl R<u8, RXDPIDSUPCNT_A>

pub fn variant(&self) -> RXDPIDSUPCNT_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _DOEP0_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn rxdpidsupcnt(&self) -> RXDPIDSUPCNT_R

Bits 29:30 - Receive Data PID / SETUP Packet Count

impl R<u32, Reg<u32, _DOEP0_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _DOEP1_CTL>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn usbactep(&self) -> USBACTEP_R

Bit 15 - USB Active Endpoint

pub fn dpideof(&self) -> DPIDEOF_R

Bit 16 - Endpoint Data PID / Even-odd Frame

pub fn naksts(&self) -> NAKSTS_R

Bit 17 - NAK Status

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn snp(&self) -> SNP_R

Bit 20 - Snoop Mode

pub fn stall(&self) -> STALL_R

Bit 21 - STALL Handshake

pub fn epdis(&self) -> EPDIS_R

Bit 30 - Endpoint Disable

pub fn epena(&self) -> EPENA_R

Bit 31 - Endpoint Enable

impl R<u32, Reg<u32, _DOEP1_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed Interrupt

pub fn epdisbld(&self) -> EPDISBLD_R

Bit 1 - Endpoint Disabled Interrupt

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn setup(&self) -> SETUP_R

Bit 3 - Setup Phase Done

pub fn outtknepdis(&self) -> OUTTKNEPDIS_R

Bit 4 - OUT Token Received When Endpoint Disabled

pub fn stsphsercvd(&self) -> STSPHSERCVD_R

Bit 5 - Status Phase Received For Control Write

pub fn back2backsetup(&self) -> BACK2BACKSETUP_R

Bit 6 - Back-to-Back SETUP Packets Received

pub fn outpkterr(&self) -> OUTPKTERR_R

Bit 8 - OUT Packet Error

pub fn pktdrpsts(&self) -> PKTDRPSTS_R

Bit 11 - Packet Drop Status

pub fn bbleerr(&self) -> BBLEERR_R

Bit 12 - Babble Error

pub fn nakintrpt(&self) -> NAKINTRPT_R

Bit 13 - NAK Interrupt

pub fn stuppktrcvd(&self) -> STUPPKTRCVD_R

Bit 15

impl R<u8, RXDPIDSUPCNT_A>

pub fn variant(&self) -> RXDPIDSUPCNT_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _DOEP1_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn rxdpidsupcnt(&self) -> RXDPIDSUPCNT_R

Bits 29:30 - Receive Data PID / SETUP Packet Count

impl R<u32, Reg<u32, _DOEP1_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _DOEP2_CTL>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn usbactep(&self) -> USBACTEP_R

Bit 15 - USB Active Endpoint

pub fn dpideof(&self) -> DPIDEOF_R

Bit 16 - Endpoint Data PID / Even-odd Frame

pub fn naksts(&self) -> NAKSTS_R

Bit 17 - NAK Status

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn snp(&self) -> SNP_R

Bit 20 - Snoop Mode

pub fn stall(&self) -> STALL_R

Bit 21 - STALL Handshake

pub fn epdis(&self) -> EPDIS_R

Bit 30 - Endpoint Disable

pub fn epena(&self) -> EPENA_R

Bit 31 - Endpoint Enable

impl R<u32, Reg<u32, _DOEP2_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed Interrupt

pub fn epdisbld(&self) -> EPDISBLD_R

Bit 1 - Endpoint Disabled Interrupt

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn setup(&self) -> SETUP_R

Bit 3 - Setup Phase Done

pub fn outtknepdis(&self) -> OUTTKNEPDIS_R

Bit 4 - OUT Token Received When Endpoint Disabled

pub fn stsphsercvd(&self) -> STSPHSERCVD_R

Bit 5 - Status Phase Received For Control Write

pub fn back2backsetup(&self) -> BACK2BACKSETUP_R

Bit 6 - Back-to-Back SETUP Packets Received

pub fn outpkterr(&self) -> OUTPKTERR_R

Bit 8 - OUT Packet Error

pub fn pktdrpsts(&self) -> PKTDRPSTS_R

Bit 11 - Packet Drop Status

pub fn bbleerr(&self) -> BBLEERR_R

Bit 12 - Babble Error

pub fn nakintrpt(&self) -> NAKINTRPT_R

Bit 13 - NAK Interrupt

pub fn stuppktrcvd(&self) -> STUPPKTRCVD_R

Bit 15

impl R<u8, RXDPIDSUPCNT_A>

pub fn variant(&self) -> RXDPIDSUPCNT_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _DOEP2_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn rxdpidsupcnt(&self) -> RXDPIDSUPCNT_R

Bits 29:30 - Receive Data PID / SETUP Packet Count

impl R<u32, Reg<u32, _DOEP2_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _DOEP3_CTL>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn usbactep(&self) -> USBACTEP_R

Bit 15 - USB Active Endpoint

pub fn dpideof(&self) -> DPIDEOF_R

Bit 16 - Endpoint Data PID / Even-odd Frame

pub fn naksts(&self) -> NAKSTS_R

Bit 17 - NAK Status

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn snp(&self) -> SNP_R

Bit 20 - Snoop Mode

pub fn stall(&self) -> STALL_R

Bit 21 - STALL Handshake

pub fn epdis(&self) -> EPDIS_R

Bit 30 - Endpoint Disable

pub fn epena(&self) -> EPENA_R

Bit 31 - Endpoint Enable

impl R<u32, Reg<u32, _DOEP3_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed Interrupt

pub fn epdisbld(&self) -> EPDISBLD_R

Bit 1 - Endpoint Disabled Interrupt

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn setup(&self) -> SETUP_R

Bit 3 - Setup Phase Done

pub fn outtknepdis(&self) -> OUTTKNEPDIS_R

Bit 4 - OUT Token Received When Endpoint Disabled

pub fn stsphsercvd(&self) -> STSPHSERCVD_R

Bit 5 - Status Phase Received For Control Write

pub fn back2backsetup(&self) -> BACK2BACKSETUP_R

Bit 6 - Back-to-Back SETUP Packets Received

pub fn outpkterr(&self) -> OUTPKTERR_R

Bit 8 - OUT Packet Error

pub fn pktdrpsts(&self) -> PKTDRPSTS_R

Bit 11 - Packet Drop Status

pub fn bbleerr(&self) -> BBLEERR_R

Bit 12 - Babble Error

pub fn nakintrpt(&self) -> NAKINTRPT_R

Bit 13 - NAK Interrupt

pub fn stuppktrcvd(&self) -> STUPPKTRCVD_R

Bit 15

impl R<u8, RXDPIDSUPCNT_A>

pub fn variant(&self) -> RXDPIDSUPCNT_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _DOEP3_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn rxdpidsupcnt(&self) -> RXDPIDSUPCNT_R

Bits 29:30 - Receive Data PID / SETUP Packet Count

impl R<u32, Reg<u32, _DOEP3_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _DOEP4_CTL>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn usbactep(&self) -> USBACTEP_R

Bit 15 - USB Active Endpoint

pub fn dpideof(&self) -> DPIDEOF_R

Bit 16 - Endpoint Data PID / Even-odd Frame

pub fn naksts(&self) -> NAKSTS_R

Bit 17 - NAK Status

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn snp(&self) -> SNP_R

Bit 20 - Snoop Mode

pub fn stall(&self) -> STALL_R

Bit 21 - STALL Handshake

pub fn epdis(&self) -> EPDIS_R

Bit 30 - Endpoint Disable

pub fn epena(&self) -> EPENA_R

Bit 31 - Endpoint Enable

impl R<u32, Reg<u32, _DOEP4_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed Interrupt

pub fn epdisbld(&self) -> EPDISBLD_R

Bit 1 - Endpoint Disabled Interrupt

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn setup(&self) -> SETUP_R

Bit 3 - Setup Phase Done

pub fn outtknepdis(&self) -> OUTTKNEPDIS_R

Bit 4 - OUT Token Received When Endpoint Disabled

pub fn stsphsercvd(&self) -> STSPHSERCVD_R

Bit 5 - Status Phase Received For Control Write

pub fn back2backsetup(&self) -> BACK2BACKSETUP_R

Bit 6 - Back-to-Back SETUP Packets Received

pub fn outpkterr(&self) -> OUTPKTERR_R

Bit 8 - OUT Packet Error

pub fn pktdrpsts(&self) -> PKTDRPSTS_R

Bit 11 - Packet Drop Status

pub fn bbleerr(&self) -> BBLEERR_R

Bit 12 - Babble Error

pub fn nakintrpt(&self) -> NAKINTRPT_R

Bit 13 - NAK Interrupt

pub fn stuppktrcvd(&self) -> STUPPKTRCVD_R

Bit 15

impl R<u8, RXDPIDSUPCNT_A>

pub fn variant(&self) -> RXDPIDSUPCNT_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _DOEP4_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn rxdpidsupcnt(&self) -> RXDPIDSUPCNT_R

Bits 29:30 - Receive Data PID / SETUP Packet Count

impl R<u32, Reg<u32, _DOEP4_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31

impl R<u8, EPTYPE_A>

pub fn variant(&self) -> EPTYPE_A

Get enumerated values variant

pub fn is_control(&self) -> bool

Checks if the value of the field is CONTROL

pub fn is_iso(&self) -> bool

Checks if the value of the field is ISO

pub fn is_bulk(&self) -> bool

Checks if the value of the field is BULK

pub fn is_int(&self) -> bool

Checks if the value of the field is INT

impl R<u32, Reg<u32, _DOEP5_CTL>>

pub fn mps(&self) -> MPS_R

Bits 0:10 - Maximum Packet Size

pub fn usbactep(&self) -> USBACTEP_R

Bit 15 - USB Active Endpoint

pub fn dpideof(&self) -> DPIDEOF_R

Bit 16 - Endpoint Data PID / Even-odd Frame

pub fn naksts(&self) -> NAKSTS_R

Bit 17 - NAK Status

pub fn eptype(&self) -> EPTYPE_R

Bits 18:19 - Endpoint Type

pub fn snp(&self) -> SNP_R

Bit 20 - Snoop Mode

pub fn stall(&self) -> STALL_R

Bit 21 - STALL Handshake

pub fn epdis(&self) -> EPDIS_R

Bit 30 - Endpoint Disable

pub fn epena(&self) -> EPENA_R

Bit 31 - Endpoint Enable

impl R<u32, Reg<u32, _DOEP5_INT>>

pub fn xfercompl(&self) -> XFERCOMPL_R

Bit 0 - Transfer Completed Interrupt

pub fn epdisbld(&self) -> EPDISBLD_R

Bit 1 - Endpoint Disabled Interrupt

pub fn ahberr(&self) -> AHBERR_R

Bit 2 - AHB Error

pub fn setup(&self) -> SETUP_R

Bit 3 - Setup Phase Done

pub fn outtknepdis(&self) -> OUTTKNEPDIS_R

Bit 4 - OUT Token Received When Endpoint Disabled

pub fn stsphsercvd(&self) -> STSPHSERCVD_R

Bit 5 - Status Phase Received For Control Write

pub fn back2backsetup(&self) -> BACK2BACKSETUP_R

Bit 6 - Back-to-Back SETUP Packets Received

pub fn outpkterr(&self) -> OUTPKTERR_R

Bit 8 - OUT Packet Error

pub fn pktdrpsts(&self) -> PKTDRPSTS_R

Bit 11 - Packet Drop Status

pub fn bbleerr(&self) -> BBLEERR_R

Bit 12 - Babble Error

pub fn nakintrpt(&self) -> NAKINTRPT_R

Bit 13 - NAK Interrupt

pub fn stuppktrcvd(&self) -> STUPPKTRCVD_R

Bit 15

impl R<u8, RXDPIDSUPCNT_A>

pub fn variant(&self) -> RXDPIDSUPCNT_A

Get enumerated values variant

pub fn is_data0(&self) -> bool

Checks if the value of the field is DATA0

pub fn is_data2(&self) -> bool

Checks if the value of the field is DATA2

pub fn is_data1(&self) -> bool

Checks if the value of the field is DATA1

pub fn is_mdata(&self) -> bool

Checks if the value of the field is MDATA

impl R<u32, Reg<u32, _DOEP5_TSIZ>>

pub fn xfersize(&self) -> XFERSIZE_R

Bits 0:18 - Transfer Size

pub fn pktcnt(&self) -> PKTCNT_R

Bits 19:28 - Packet Count

pub fn rxdpidsupcnt(&self) -> RXDPIDSUPCNT_R

Bits 29:30 - Receive Data PID / SETUP Packet Count

impl R<u32, Reg<u32, _DOEP5_DMAADDR>>

pub fn dmaaddr(&self) -> DMAADDR_R

Bits 0:31

impl R<u32, Reg<u32, _PCGCCTL>>

pub fn stoppclk(&self) -> STOPPCLK_R

Bit 0 - Stop PHY clock

pub fn gatehclk(&self) -> GATEHCLK_R

Bit 1 - Gate HCLK

pub fn pwrclmp(&self) -> PWRCLMP_R

Bit 2 - Power Clamp

pub fn rstpdwnmodule(&self) -> RSTPDWNMODULE_R

Bit 3 - Reset Power-Down Modules

pub fn physleep(&self) -> PHYSLEEP_R

Bit 6 - PHY In Sleep

pub fn resetaftersusp(&self) -> RESETAFTERSUSP_R

Bit 8 - Reset after suspend

impl R<u8, APORTOUTSEL_A>

pub fn variant(&self) -> Variant<u8, APORTOUTSEL_A>

Get enumerated values variant

pub fn is_aport1xch0(&self) -> bool

Checks if the value of the field is APORT1XCH0

pub fn is_aport1ych1(&self) -> bool

Checks if the value of the field is APORT1YCH1

pub fn is_aport1xch2(&self) -> bool

Checks if the value of the field is APORT1XCH2

pub fn is_aport1ych3(&self) -> bool

Checks if the value of the field is APORT1YCH3

pub fn is_aport1xch4(&self) -> bool

Checks if the value of the field is APORT1XCH4

pub fn is_aport1ych5(&self) -> bool

Checks if the value of the field is APORT1YCH5

pub fn is_aport1xch6(&self) -> bool

Checks if the value of the field is APORT1XCH6

pub fn is_aport1ych7(&self) -> bool

Checks if the value of the field is APORT1YCH7

pub fn is_aport1xch8(&self) -> bool

Checks if the value of the field is APORT1XCH8

pub fn is_aport1ych9(&self) -> bool

Checks if the value of the field is APORT1YCH9

pub fn is_aport1xch10(&self) -> bool

Checks if the value of the field is APORT1XCH10

pub fn is_aport1ych11(&self) -> bool

Checks if the value of the field is APORT1YCH11

pub fn is_aport1xch12(&self) -> bool

Checks if the value of the field is APORT1XCH12

pub fn is_aport1ych13(&self) -> bool

Checks if the value of the field is APORT1YCH13

pub fn is_aport1xch14(&self) -> bool

Checks if the value of the field is APORT1XCH14

pub fn is_aport1ych15(&self) -> bool

Checks if the value of the field is APORT1YCH15

pub fn is_aport1xch16(&self) -> bool

Checks if the value of the field is APORT1XCH16

pub fn is_aport1ych17(&self) -> bool

Checks if the value of the field is APORT1YCH17

pub fn is_aport1xch18(&self) -> bool

Checks if the value of the field is APORT1XCH18

pub fn is_aport1ych19(&self) -> bool

Checks if the value of the field is APORT1YCH19

pub fn is_aport1xch20(&self) -> bool

Checks if the value of the field is APORT1XCH20

pub fn is_aport1ych21(&self) -> bool

Checks if the value of the field is APORT1YCH21

pub fn is_aport1xch22(&self) -> bool

Checks if the value of the field is APORT1XCH22

pub fn is_aport1ych23(&self) -> bool

Checks if the value of the field is APORT1YCH23

pub fn is_aport1xch24(&self) -> bool

Checks if the value of the field is APORT1XCH24

pub fn is_aport1ych25(&self) -> bool

Checks if the value of the field is APORT1YCH25

pub fn is_aport1xch26(&self) -> bool

Checks if the value of the field is APORT1XCH26

pub fn is_aport1ych27(&self) -> bool

Checks if the value of the field is APORT1YCH27

pub fn is_aport1xch28(&self) -> bool

Checks if the value of the field is APORT1XCH28

pub fn is_aport1ych29(&self) -> bool

Checks if the value of the field is APORT1YCH29

pub fn is_aport1xch30(&self) -> bool

Checks if the value of the field is APORT1XCH30

pub fn is_aport1ych31(&self) -> bool

Checks if the value of the field is APORT1YCH31

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Current DAC Enable

pub fn cursink(&self) -> CURSINK_R

Bit 1 - Current Sink Enable

pub fn minouttrans(&self) -> MINOUTTRANS_R

Bit 2 - Minimum Output Transition Enable

pub fn aportouten(&self) -> APORTOUTEN_R

Bit 3 - APORT Output Enable

pub fn aportoutsel(&self) -> APORTOUTSEL_R

Bits 4:11 - APORT Output Select

pub fn pwrsel(&self) -> PWRSEL_R

Bit 12 - Power Select

pub fn em2delay(&self) -> EM2DELAY_R

Bit 13 - EM2 Delay

pub fn aportmasterdis(&self) -> APORTMASTERDIS_R

Bit 14 - APORT Bus Master Disable

pub fn aportoutenprs(&self) -> APORTOUTENPRS_R

Bit 16 - PRS Controlled APORT Output Enable

pub fn mainouten(&self) -> MAINOUTEN_R

Bit 18 - Output Enable

pub fn mainoutenprs(&self) -> MAINOUTENPRS_R

Bit 19 - PRS Controlled Main Pad Output Enable

pub fn prssel(&self) -> PRSSEL_R

Bits 20:24 - IDAC Output Enable PRS Channel Select

impl R<u8, RANGESEL_A>

pub fn variant(&self) -> RANGESEL_A

Get enumerated values variant

pub fn is_range0(&self) -> bool

Checks if the value of the field is RANGE0

pub fn is_range1(&self) -> bool

Checks if the value of the field is RANGE1

pub fn is_range2(&self) -> bool

Checks if the value of the field is RANGE2

pub fn is_range3(&self) -> bool

Checks if the value of the field is RANGE3

impl R<u32, Reg<u32, _CURPROG>>

pub fn rangesel(&self) -> RANGESEL_R

Bits 0:1 - Current Range Select

pub fn stepsel(&self) -> STEPSEL_R

Bits 8:12 - Current Step Size Select

pub fn tuning(&self) -> TUNING_R

Bits 16:23 - Tune the Current to Given Accuracy

impl R<u32, Reg<u32, _DUTYCONFIG>>

pub fn em2dutycycledis(&self) -> EM2DUTYCYCLEDIS_R

Bit 1 - Duty Cycle Enable

impl R<u32, Reg<u32, _STATUS>>

pub fn curstable(&self) -> CURSTABLE_R

Bit 0 - IDAC Output Current Stable

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 1 - APORT Conflict Output

impl R<u32, Reg<u32, _IF>>

pub fn curstable(&self) -> CURSTABLE_R

Bit 0 - Edge Triggered Interrupt Flag

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 1 - APORT Conflict Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn curstable(&self) -> CURSTABLE_R

Bit 0 - CURSTABLE Interrupt Enable

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 1 - APORTCONFLICT Interrupt Enable

impl R<u32, Reg<u32, _APORTREQ>>

pub fn aport1xreq(&self) -> APORT1XREQ_R

Bit 2 - 1 If the APORT Bus Connected to APORT1X is Requested

pub fn aport1yreq(&self) -> APORT1YREQ_R

Bit 3 - 1 If the Bus Connected to APORT1Y is Requested

impl R<u32, Reg<u32, _APORTCONFLICT>>

pub fn aport1xconflict(&self) -> APORT1XCONFLICT_R

Bit 2 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport1yconflict(&self) -> APORT1YCONFLICT_R

Bit 3 - 1 If the Bus Connected to APORT1Y is in Conflict With Another Peripheral

impl R<u8, CM_A>

pub fn variant(&self) -> CM_A

Get enumerated values variant

pub fn is_sgl(&self) -> bool

Checks if the value of the field is SGL

pub fn is_scan(&self) -> bool

Checks if the value of the field is SCAN

pub fn is_contsgl(&self) -> bool

Checks if the value of the field is CONTSGL

pub fn is_contscan(&self) -> bool

Checks if the value of the field is CONTSCAN

impl R<u8, SARCR_A>

pub fn variant(&self) -> SARCR_A

Get enumerated values variant

pub fn is_clk10(&self) -> bool

Checks if the value of the field is CLK10

pub fn is_clk12(&self) -> bool

Checks if the value of the field is CLK12

pub fn is_clk14(&self) -> bool

Checks if the value of the field is CLK14

pub fn is_clk16(&self) -> bool

Checks if the value of the field is CLK16

impl R<u8, ACU_A>

pub fn variant(&self) -> Variant<u8, ACU_A>

Get enumerated values variant

pub fn is_acc1(&self) -> bool

Checks if the value of the field is ACC1

pub fn is_acc2(&self) -> bool

Checks if the value of the field is ACC2

pub fn is_acc4(&self) -> bool

Checks if the value of the field is ACC4

pub fn is_acc8(&self) -> bool

Checks if the value of the field is ACC8

pub fn is_acc16(&self) -> bool

Checks if the value of the field is ACC16

pub fn is_acc32(&self) -> bool

Checks if the value of the field is ACC32

pub fn is_acc64(&self) -> bool

Checks if the value of the field is ACC64

impl R<u8, STM_A>

pub fn variant(&self) -> Variant<u8, STM_A>

Get enumerated values variant

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_timer(&self) -> bool

Checks if the value of the field is TIMER

pub fn is_start(&self) -> bool

Checks if the value of the field is START

impl R<u32, Reg<u32, _CTRL>>

pub fn en(&self) -> EN_R

Bit 1 - CSEN Enable

pub fn cmppol(&self) -> CMPPOL_R

Bit 2 - CSEN Digital Comparator Polarity Select

pub fn cm(&self) -> CM_R

Bits 4:5 - CSEN Conversion Mode Select

pub fn sarcr(&self) -> SARCR_R

Bits 8:9 - SAR Conversion Resolution.

pub fn acu(&self) -> ACU_R

Bits 12:14 - CSEN Accumulator Mode Select

pub fn mcen(&self) -> MCEN_R

Bit 15 - CSEN Multiple Channel Enable

pub fn stm(&self) -> STM_R

Bits 16:17 - Start Trigger Select

pub fn cmpen(&self) -> CMPEN_R

Bit 18 - CSEN Digital Comparator Enable

pub fn drsf(&self) -> DRSF_R

Bit 19 - CSEN Disable Right-Shift

pub fn dmaen(&self) -> DMAEN_R

Bit 20 - CSEN DMA Enable Bit

pub fn convsel(&self) -> CONVSEL_R

Bit 21 - CSEN Converter Select

pub fn chopen(&self) -> CHOPEN_R

Bit 22 - CSEN Chop Enable

pub fn autognd(&self) -> AUTOGND_R

Bit 23 - CSEN Automatic Ground Enable

pub fn mxuc(&self) -> MXUC_R

Bit 24 - CSEN Mux Disconnect

pub fn emacmpen(&self) -> EMACMPEN_R

Bit 25 - Greater and Less Than Comparison Using the Exponential Moving Average (EMA) is Enabled

pub fn warmupmode(&self) -> WARMUPMODE_R

Bit 26 - Select Warmup Mode for CSEN

pub fn localsens(&self) -> LOCALSENS_R

Bit 27 - Local Sensing Enable

pub fn cpaccuracy(&self) -> CPACCURACY_R

Bit 28 - Charge Pump Accuracy

impl R<u8, PCPRESC_A>

pub fn variant(&self) -> PCPRESC_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

impl R<u32, Reg<u32, _TIMCTRL>>

pub fn pcpresc(&self) -> PCPRESC_R

Bits 0:2 - Period Counter Prescaler

pub fn pctop(&self) -> PCTOP_R

Bits 8:15 - Period Counter Top Value

pub fn warmupcnt(&self) -> WARMUPCNT_R

Bits 16:17 - Warmup Period Counter

impl R<u32, Reg<u32, _STATUS>>

pub fn csenbusy(&self) -> CSENBUSY_R

Bit 0 - Busy Flag

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _PRSSEL>>

pub fn prssel(&self) -> PRSSEL_R

Bits 0:4 - PRS Channel Select

impl R<u32, Reg<u32, _DATA>>

pub fn data(&self) -> DATA_R

Bits 0:31 - Output Data

impl R<u32, Reg<u32, _SCANMASK0>>

pub fn scaninputen(&self) -> SCANINPUTEN_R

Bits 0:31 - Scan Channel Mask

impl R<u8, INPUT0TO7SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT0TO7SEL_A>

Get enumerated values variant

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

impl R<u8, INPUT8TO15SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT8TO15SEL_A>

Get enumerated values variant

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

impl R<u8, INPUT16TO23SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT16TO23SEL_A>

Get enumerated values variant

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

impl R<u8, INPUT24TO31SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT24TO31SEL_A>

Get enumerated values variant

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

impl R<u32, Reg<u32, _SCANINPUTSEL0>>

pub fn input0to7sel(&self) -> INPUT0TO7SEL_R

Bits 0:3 - CSEN_INPUT0-7 Select

pub fn input8to15sel(&self) -> INPUT8TO15SEL_R

Bits 8:11 - CSEN_INPUT8-15 Select

pub fn input16to23sel(&self) -> INPUT16TO23SEL_R

Bits 16:19 - CSEN_INPUT16-23 Select

pub fn input24to31sel(&self) -> INPUT24TO31SEL_R

Bits 24:27 - CSEN_INPUT24-31 Select

impl R<u32, Reg<u32, _SCANMASK1>>

pub fn scaninputen(&self) -> SCANINPUTEN_R

Bits 0:31 - Scan Channel Mask.

impl R<u8, INPUT32TO39SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT32TO39SEL_A>

Get enumerated values variant

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

impl R<u8, INPUT40TO47SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT40TO47SEL_A>

Get enumerated values variant

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

impl R<u8, INPUT48TO55SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT48TO55SEL_A>

Get enumerated values variant

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

impl R<u8, INPUT56TO63SEL_A>

pub fn variant(&self) -> Variant<u8, INPUT56TO63SEL_A>

Get enumerated values variant

pub fn is_aport1ch0to7(&self) -> bool

Checks if the value of the field is APORT1CH0TO7

pub fn is_aport1ch8to15(&self) -> bool

Checks if the value of the field is APORT1CH8TO15

pub fn is_aport1ch16to23(&self) -> bool

Checks if the value of the field is APORT1CH16TO23

pub fn is_aport1ch24to31(&self) -> bool

Checks if the value of the field is APORT1CH24TO31

pub fn is_aport3ch0to7(&self) -> bool

Checks if the value of the field is APORT3CH0TO7

pub fn is_aport3ch8to15(&self) -> bool

Checks if the value of the field is APORT3CH8TO15

pub fn is_aport3ch16to23(&self) -> bool

Checks if the value of the field is APORT3CH16TO23

pub fn is_aport3ch24to31(&self) -> bool

Checks if the value of the field is APORT3CH24TO31

impl R<u32, Reg<u32, _SCANINPUTSEL1>>

pub fn input32to39sel(&self) -> INPUT32TO39SEL_R

Bits 0:3 - CSEN_INPUT32-39 Select

pub fn input40to47sel(&self) -> INPUT40TO47SEL_R

Bits 8:11 - CSEN_INPUT40-47 Select

pub fn input48to55sel(&self) -> INPUT48TO55SEL_R

Bits 16:19 - CSEN_INPUT48-55 Select

pub fn input56to63sel(&self) -> INPUT56TO63SEL_R

Bits 24:27 - CSEN_INPUT56-63 Select

impl R<u32, Reg<u32, _APORTREQ>>

pub fn aport1xreq(&self) -> APORT1XREQ_R

Bit 2 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport1yreq(&self) -> APORT1YREQ_R

Bit 3 - 1 If the Bus Connected to APORT1X is Requested

pub fn aport2xreq(&self) -> APORT2XREQ_R

Bit 4 - 1 If the Bus Connected to APORT2X is Requested

pub fn aport2yreq(&self) -> APORT2YREQ_R

Bit 5 - 1 If the Bus Connected to APORT2Y is Requested

pub fn aport3xreq(&self) -> APORT3XREQ_R

Bit 6 - 1 If the Bus Connected to APORT3X is Requested

pub fn aport3yreq(&self) -> APORT3YREQ_R

Bit 7 - 1 If the Bus Connected to APORT3Y is Requested

pub fn aport4xreq(&self) -> APORT4XREQ_R

Bit 8 - 1 If the Bus Connected to APORT4X is Requested

pub fn aport4yreq(&self) -> APORT4YREQ_R

Bit 9 - 1 If the Bus Connected to APORT4Y is Requested

impl R<u32, Reg<u32, _APORTCONFLICT>>

pub fn aport1xconflict(&self) -> APORT1XCONFLICT_R

Bit 2 - 1 If the Bus Connected to APORT1X is in Conflict With Another Peripheral

pub fn aport1yconflict(&self) -> APORT1YCONFLICT_R

Bit 3 - 1 If the Bus Connected to APORT1Y is in Conflict With Another Peripheral

pub fn aport2xconflict(&self) -> APORT2XCONFLICT_R

Bit 4 - 1 If the Bus Connected to APORT2X is in Conflict With Another Peripheral

pub fn aport2yconflict(&self) -> APORT2YCONFLICT_R

Bit 5 - 1 If the Bus Connected to APORT2Y is in Conflict With Another Peripheral

pub fn aport3xconflict(&self) -> APORT3XCONFLICT_R

Bit 6 - 1 If the Bus Connected to APORT3X is in Conflict With Another Peripheral

pub fn aport3yconflict(&self) -> APORT3YCONFLICT_R

Bit 7 - 1 If the Bus Connected to APORT3Y is in Conflict With Another Peripheral

pub fn aport4xconflict(&self) -> APORT4XCONFLICT_R

Bit 8 - 1 If the Bus Connected to APORT4X is in Conflict With Another Peripheral

pub fn aport4yconflict(&self) -> APORT4YCONFLICT_R

Bit 9 - 1 If the Bus Connected to APORT4Y is in Conflict With Another Peripheral

impl R<u32, Reg<u32, _CMPTHR>>

pub fn cmpthr(&self) -> CMPTHR_R

Bits 0:15 - Comparator Threshold.

impl R<u32, Reg<u32, _EMA>>

pub fn ema(&self) -> EMA_R

Bits 0:21 - Calculated Exponential Moving Average

impl R<u8, EMASAMPLE_A>

pub fn variant(&self) -> Variant<u8, EMASAMPLE_A>

Get enumerated values variant

pub fn is_w1(&self) -> bool

Checks if the value of the field is W1

pub fn is_w2(&self) -> bool

Checks if the value of the field is W2

pub fn is_w4(&self) -> bool

Checks if the value of the field is W4

pub fn is_w8(&self) -> bool

Checks if the value of the field is W8

pub fn is_w16(&self) -> bool

Checks if the value of the field is W16

pub fn is_w32(&self) -> bool

Checks if the value of the field is W32

pub fn is_w64(&self) -> bool

Checks if the value of the field is W64

impl R<u32, Reg<u32, _EMACTRL>>

pub fn emasample(&self) -> EMASAMPLE_R

Bits 0:2 - EMA Sample Weight

impl R<u8, SINGLESEL_A>

pub fn variant(&self) -> Variant<u8, SINGLESEL_A>

Get enumerated values variant

pub fn is_aport1xch0(&self) -> bool

Checks if the value of the field is APORT1XCH0

pub fn is_aport1ych1(&self) -> bool

Checks if the value of the field is APORT1YCH1

pub fn is_aport1xch2(&self) -> bool

Checks if the value of the field is APORT1XCH2

pub fn is_aport1ych3(&self) -> bool

Checks if the value of the field is APORT1YCH3

pub fn is_aport1xch4(&self) -> bool

Checks if the value of the field is APORT1XCH4

pub fn is_aport1ych5(&self) -> bool

Checks if the value of the field is APORT1YCH5

pub fn is_aport1xch6(&self) -> bool

Checks if the value of the field is APORT1XCH6

pub fn is_aport1ych7(&self) -> bool

Checks if the value of the field is APORT1YCH7

pub fn is_aport1xch8(&self) -> bool

Checks if the value of the field is APORT1XCH8

pub fn is_aport1ych9(&self) -> bool

Checks if the value of the field is APORT1YCH9

pub fn is_aport1xch10(&self) -> bool

Checks if the value of the field is APORT1XCH10

pub fn is_aport1ych11(&self) -> bool

Checks if the value of the field is APORT1YCH11

pub fn is_aport1xch12(&self) -> bool

Checks if the value of the field is APORT1XCH12

pub fn is_aport1ych13(&self) -> bool

Checks if the value of the field is APORT1YCH13

pub fn is_aport1xch14(&self) -> bool

Checks if the value of the field is APORT1XCH14

pub fn is_aport1ych15(&self) -> bool

Checks if the value of the field is APORT1YCH15

pub fn is_aport1xch16(&self) -> bool

Checks if the value of the field is APORT1XCH16

pub fn is_aport1ych17(&self) -> bool

Checks if the value of the field is APORT1YCH17

pub fn is_aport1xch18(&self) -> bool

Checks if the value of the field is APORT1XCH18

pub fn is_aport1ych19(&self) -> bool

Checks if the value of the field is APORT1YCH19

pub fn is_aport1xch20(&self) -> bool

Checks if the value of the field is APORT1XCH20

pub fn is_aport1ych21(&self) -> bool

Checks if the value of the field is APORT1YCH21

pub fn is_aport1xch22(&self) -> bool

Checks if the value of the field is APORT1XCH22

pub fn is_aport1ych23(&self) -> bool

Checks if the value of the field is APORT1YCH23

pub fn is_aport1xch24(&self) -> bool

Checks if the value of the field is APORT1XCH24

pub fn is_aport1ych25(&self) -> bool

Checks if the value of the field is APORT1YCH25

pub fn is_aport1xch26(&self) -> bool

Checks if the value of the field is APORT1XCH26

pub fn is_aport1ych27(&self) -> bool

Checks if the value of the field is APORT1YCH27

pub fn is_aport1xch28(&self) -> bool

Checks if the value of the field is APORT1XCH28

pub fn is_aport1ych29(&self) -> bool

Checks if the value of the field is APORT1YCH29

pub fn is_aport1xch30(&self) -> bool

Checks if the value of the field is APORT1XCH30

pub fn is_aport1ych31(&self) -> bool

Checks if the value of the field is APORT1YCH31

pub fn is_aport3xch0(&self) -> bool

Checks if the value of the field is APORT3XCH0

pub fn is_aport3ych1(&self) -> bool

Checks if the value of the field is APORT3YCH1

pub fn is_aport3xch2(&self) -> bool

Checks if the value of the field is APORT3XCH2

pub fn is_aport3ych3(&self) -> bool

Checks if the value of the field is APORT3YCH3

pub fn is_aport3xch4(&self) -> bool

Checks if the value of the field is APORT3XCH4

pub fn is_aport3ych5(&self) -> bool

Checks if the value of the field is APORT3YCH5

pub fn is_aport3xch6(&self) -> bool

Checks if the value of the field is APORT3XCH6

pub fn is_aport3ych7(&self) -> bool

Checks if the value of the field is APORT3YCH7

pub fn is_aport3xch8(&self) -> bool

Checks if the value of the field is APORT3XCH8

pub fn is_aport3ych9(&self) -> bool

Checks if the value of the field is APORT3YCH9

pub fn is_aport3xch10(&self) -> bool

Checks if the value of the field is APORT3XCH10

pub fn is_aport3ych11(&self) -> bool

Checks if the value of the field is APORT3YCH11

pub fn is_aport3xch12(&self) -> bool

Checks if the value of the field is APORT3XCH12

pub fn is_aport3ych13(&self) -> bool

Checks if the value of the field is APORT3YCH13

pub fn is_aport3xch14(&self) -> bool

Checks if the value of the field is APORT3XCH14

pub fn is_aport3ych15(&self) -> bool

Checks if the value of the field is APORT3YCH15

pub fn is_aport3xch16(&self) -> bool

Checks if the value of the field is APORT3XCH16

pub fn is_aport3ych17(&self) -> bool

Checks if the value of the field is APORT3YCH17

pub fn is_aport3xch18(&self) -> bool

Checks if the value of the field is APORT3XCH18

pub fn is_aport3ych19(&self) -> bool

Checks if the value of the field is APORT3YCH19

pub fn is_aport3xch20(&self) -> bool

Checks if the value of the field is APORT3XCH20

pub fn is_aport3ych21(&self) -> bool

Checks if the value of the field is APORT3YCH21

pub fn is_aport3xch22(&self) -> bool

Checks if the value of the field is APORT3XCH22

pub fn is_aport3ych23(&self) -> bool

Checks if the value of the field is APORT3YCH23

pub fn is_aport3xch24(&self) -> bool

Checks if the value of the field is APORT3XCH24

pub fn is_aport3ych25(&self) -> bool

Checks if the value of the field is APORT3YCH25

pub fn is_aport3xch26(&self) -> bool

Checks if the value of the field is APORT3XCH26

pub fn is_aport3ych27(&self) -> bool

Checks if the value of the field is APORT3YCH27

pub fn is_aport3xch28(&self) -> bool

Checks if the value of the field is APORT3XCH28

pub fn is_aport3ych29(&self) -> bool

Checks if the value of the field is APORT3YCH29

pub fn is_aport3xch30(&self) -> bool

Checks if the value of the field is APORT3XCH30

pub fn is_aport3ych31(&self) -> bool

Checks if the value of the field is APORT3YCH31

impl R<u32, Reg<u32, _SINGLECTRL>>

pub fn singlesel(&self) -> SINGLESEL_R

Bits 4:10 - Single Channel Input Select

impl R<u32, Reg<u32, _DMBASELINE>>

pub fn baselineup(&self) -> BASELINEUP_R

Bits 0:15 - Delta Modulator Integrator Initial Value

pub fn baselinedn(&self) -> BASELINEDN_R

Bits 16:31 - Delta Modulator Integrator Initial Value

impl R<u8, CRMODE_A>

pub fn variant(&self) -> CRMODE_A

Get enumerated values variant

pub fn is_dm10(&self) -> bool

Checks if the value of the field is DM10

pub fn is_dm12(&self) -> bool

Checks if the value of the field is DM12

pub fn is_dm14(&self) -> bool

Checks if the value of the field is DM14

pub fn is_dm16(&self) -> bool

Checks if the value of the field is DM16

impl R<u32, Reg<u32, _DMCFG>>

pub fn dmg(&self) -> DMG_R

Bits 0:7 - Delta Modulator Gain Step

pub fn dmr(&self) -> DMR_R

Bits 8:11 - Delta Modulator Gain Reduction Interval

pub fn dmcr(&self) -> DMCR_R

Bits 16:19 - Delta Modulator Conversion Rate

pub fn crmode(&self) -> CRMODE_R

Bits 20:21 - Delta Modulator Conversion Resolution.

pub fn dmgrdis(&self) -> DMGRDIS_R

Bit 28 - Delta Modulation Gain Step Reduction Disable

impl R<u32, Reg<u32, _ANACTRL>>

pub fn irefprog(&self) -> IREFPROG_R

Bits 4:6 - Reference Current Control.

pub fn idacirefs(&self) -> IDACIREFS_R

Bits 8:10 - Current DAC and Reference Current Scale

pub fn trstprog(&self) -> TRSTPROG_R

Bits 20:22 - Reset Timing

impl R<u32, Reg<u32, _IF>>

pub fn cmp(&self) -> CMP_R

Bit 0 - Digital Comparator Interrupt Flag

pub fn conv(&self) -> CONV_R

Bit 1 - Conversion Done Interrupt Flag

pub fn eos(&self) -> EOS_R

Bit 2 - End of Scan Interrupt Flag.

pub fn dmaof(&self) -> DMAOF_R

Bit 3 - DMA Overflow Interrupt Flag.

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 4 - APORT Conflict Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn cmp(&self) -> CMP_R

Bit 0 - CMP Interrupt Enable

pub fn conv(&self) -> CONV_R

Bit 1 - CONV Interrupt Enable

pub fn eos(&self) -> EOS_R

Bit 2 - EOS Interrupt Enable

pub fn dmaof(&self) -> DMAOF_R

Bit 3 - DMAOF Interrupt Enable

pub fn aportconflict(&self) -> APORTCONFLICT_R

Bit 4 - APORTCONFLICT Interrupt Enable

impl R<u8, UDCTRL_A>

pub fn variant(&self) -> Variant<u8, UDCTRL_A>

Get enumerated values variant

pub fn is_regular(&self) -> bool

Checks if the value of the field is REGULAR

pub fn is_fcevent(&self) -> bool

Checks if the value of the field is FCEVENT

pub fn is_framestart(&self) -> bool

Checks if the value of the field is FRAMESTART

impl R<u32, Reg<u32, _CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - LCD Enable

pub fn udctrl(&self) -> UDCTRL_R

Bits 1:2 - Update Data Control

pub fn dsc(&self) -> DSC_R

Bit 23 - Direct Segment Control

impl R<u8, MUX_A>

pub fn variant(&self) -> Variant<u8, MUX_A>

Get enumerated values variant

pub fn is_static_(&self) -> bool

Checks if the value of the field is STATIC

pub fn is_duplex(&self) -> bool

Checks if the value of the field is DUPLEX

pub fn is_triplex(&self) -> bool

Checks if the value of the field is TRIPLEX

pub fn is_quadruplex(&self) -> bool

Checks if the value of the field is QUADRUPLEX

pub fn is_sextaplex(&self) -> bool

Checks if the value of the field is SEXTAPLEX

pub fn is_octaplex(&self) -> bool

Checks if the value of the field is OCTAPLEX

impl R<u8, CHGRDST_A>

pub fn variant(&self) -> Variant<u8, CHGRDST_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

pub fn is_three(&self) -> bool

Checks if the value of the field is THREE

pub fn is_four(&self) -> bool

Checks if the value of the field is FOUR

impl R<u8, BIAS_A>

pub fn variant(&self) -> BIAS_A

Get enumerated values variant

pub fn is_static_(&self) -> bool

Checks if the value of the field is STATIC

pub fn is_onehalf(&self) -> bool

Checks if the value of the field is ONEHALF

pub fn is_onethird(&self) -> bool

Checks if the value of the field is ONETHIRD

pub fn is_onefourth(&self) -> bool

Checks if the value of the field is ONEFOURTH

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_noextcap(&self) -> bool

Checks if the value of the field is NOEXTCAP

pub fn is_stepdown(&self) -> bool

Checks if the value of the field is STEPDOWN

pub fn is_cpintosc(&self) -> bool

Checks if the value of the field is CPINTOSC

impl R<u32, Reg<u32, _DISPCTRL>>

pub fn mux(&self) -> MUX_R

Bits 0:2 - Mux Configuration

pub fn wave(&self) -> WAVE_R

Bit 4 - Waveform Selection

pub fn contrast(&self) -> CONTRAST_R

Bits 8:13 - Contrast Control

pub fn chgrdst(&self) -> CHGRDST_R

Bits 20:22 - Charge Redistribution Cycles

pub fn bias(&self) -> BIAS_R

Bits 24:25 - Bias Configuration

pub fn mode(&self) -> MODE_R

Bits 28:29 - Mode Setting

impl R<u32, Reg<u32, _SEGEN>>

pub fn segen(&self) -> SEGEN_R

Bits 0:31 - Segment Enable

impl R<u8, AREGASC_A>

pub fn variant(&self) -> Variant<u8, AREGASC_A>

Get enumerated values variant

pub fn is_noshift(&self) -> bool

Checks if the value of the field is NOSHIFT

pub fn is_shiftleft(&self) -> bool

Checks if the value of the field is SHIFTLEFT

pub fn is_shiftright(&self) -> bool

Checks if the value of the field is SHIFTRIGHT

impl R<u8, AREGBSC_A>

pub fn variant(&self) -> Variant<u8, AREGBSC_A>

Get enumerated values variant

pub fn is_noshift(&self) -> bool

Checks if the value of the field is NOSHIFT

pub fn is_shiftleft(&self) -> bool

Checks if the value of the field is SHIFTLEFT

pub fn is_shiftright(&self) -> bool

Checks if the value of the field is SHIFTRIGHT

impl R<u8, FCPRESC_A>

pub fn variant(&self) -> FCPRESC_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

impl R<u32, Reg<u32, _BACTRL>>

pub fn blinken(&self) -> BLINKEN_R

Bit 0 - Blink Enable

pub fn blank(&self) -> BLANK_R

Bit 1 - Blank Display

pub fn aen(&self) -> AEN_R

Bit 2 - Animation Enable

pub fn aregasc(&self) -> AREGASC_R

Bits 3:4 - Animate Register a Shift Control

pub fn aregbsc(&self) -> AREGBSC_R

Bits 5:6 - Animate Register B Shift Control

pub fn alogsel(&self) -> ALOGSEL_R

Bit 7 - Animate Logic Function Select

pub fn fcen(&self) -> FCEN_R

Bit 8 - Frame Counter Enable

pub fn fcpresc(&self) -> FCPRESC_R

Bits 16:17 - Frame Counter Prescaler

pub fn fctop(&self) -> FCTOP_R

Bits 18:23 - Frame Counter Top Value

pub fn aloc(&self) -> ALOC_R

Bit 28 - Animation Location

impl R<u32, Reg<u32, _STATUS>>

pub fn astate(&self) -> ASTATE_R

Bits 0:3 - Current Animation State

pub fn blink(&self) -> BLINK_R

Bit 8 - Blink State

impl R<u32, Reg<u32, _AREGA>>

pub fn arega(&self) -> AREGA_R

Bits 0:7 - Animation Register a Data

impl R<u32, Reg<u32, _AREGB>>

pub fn aregb(&self) -> AREGB_R

Bits 0:7 - Animation Register B Data

impl R<u32, Reg<u32, _IF>>

pub fn fc(&self) -> FC_R

Bit 0 - Frame Counter Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn fc(&self) -> FC_R

Bit 0 - Frame Counter Interrupt Enable

impl R<u32, Reg<u32, _BIASCTRL>>

pub fn speed(&self) -> SPEED_R

Bits 0:2 - SPEED Adjustment

pub fn bufdrv(&self) -> BUFDRV_R

Bits 4:7 - Buffer Drive Strength

pub fn bufbias(&self) -> BUFBIAS_R

Bits 10:12 - Buffer Bias Setting

impl R<u32, Reg<u32, _SEGD0L>>

pub fn segd0l(&self) -> SEGD0L_R

Bits 0:31 - COM0 Segment Data Low

impl R<u32, Reg<u32, _SEGD1L>>

pub fn segd1l(&self) -> SEGD1L_R

Bits 0:31 - COM1 Segment Data Low

impl R<u32, Reg<u32, _SEGD2L>>

pub fn segd2l(&self) -> SEGD2L_R

Bits 0:31 - COM2 Segment Data Low

impl R<u32, Reg<u32, _SEGD3L>>

pub fn segd3l(&self) -> SEGD3L_R

Bits 0:31 - COM3 Segment Data Low

impl R<u32, Reg<u32, _SEGD0H>>

pub fn segd0h(&self) -> SEGD0H_R

Bits 0:7 - COM0 Segment Data High

impl R<u32, Reg<u32, _SEGD1H>>

pub fn segd1h(&self) -> SEGD1H_R

Bits 0:7 - COM1 Segment Data High

impl R<u32, Reg<u32, _SEGD2H>>

pub fn segd2h(&self) -> SEGD2H_R

Bits 0:7 - COM2 Segment Data High

impl R<u32, Reg<u32, _SEGD3H>>

pub fn segd3h(&self) -> SEGD3H_R

Bits 0:7 - COM3 Segment Data High

impl R<u32, Reg<u32, _SEGD4L>>

pub fn segd4l(&self) -> SEGD4L_R

Bits 0:31 - COM4 Segment Data

impl R<u32, Reg<u32, _SEGD5L>>

pub fn segd5l(&self) -> SEGD5L_R

Bits 0:31 - COM5 Segment Data

impl R<u32, Reg<u32, _SEGD6L>>

pub fn segd6l(&self) -> SEGD6L_R

Bits 0:31 - COM6 Segment Data

impl R<u32, Reg<u32, _SEGD7L>>

pub fn segd7l(&self) -> SEGD7L_R

Bits 0:31 - COM7 Segment Data

impl R<u32, Reg<u32, _SEGD4H>>

pub fn segd4h(&self) -> SEGD4H_R

Bits 0:7 - COM0 Segment Data High

impl R<u32, Reg<u32, _SEGD5H>>

pub fn segd5h(&self) -> SEGD5H_R

Bits 0:7 - COM1 Segment Data High

impl R<u32, Reg<u32, _SEGD6H>>

pub fn segd6h(&self) -> SEGD6H_R

Bits 0:7 - COM2 Segment Data High

impl R<u32, Reg<u32, _SEGD7H>>

pub fn segd7h(&self) -> SEGD7H_R

Bits 0:7 - COM3 Segment Data High

impl R<u32, Reg<u32, _FREEZE>>

pub fn regfreeze(&self) -> REGFREEZE_R

Bit 0 - Register Update Freeze

pub fn lcdgate(&self) -> LCDGATE_R

Bit 1 - LCD Gate

impl R<u32, Reg<u32, _SYNCBUSY>>

pub fn ctrl(&self) -> CTRL_R

Bit 0 - CTRL Register Busy

pub fn bactrl(&self) -> BACTRL_R

Bit 1 - BACTRL Register Busy

pub fn arega(&self) -> AREGA_R

Bit 2 - AREGA Register Busy

pub fn aregb(&self) -> AREGB_R

Bit 3 - AREGB Register Busy

pub fn segd0l(&self) -> SEGD0L_R

Bit 4 - SEGD0L Register Busy

pub fn segd1l(&self) -> SEGD1L_R

Bit 5 - SEGD1L Register Busy

pub fn segd2l(&self) -> SEGD2L_R

Bit 6 - SEGD2L Register Busy

pub fn segd3l(&self) -> SEGD3L_R

Bit 7 - SEGD3L Register Busy

pub fn segd0h(&self) -> SEGD0H_R

Bit 8 - SEGD0H Register Busy

pub fn segd1h(&self) -> SEGD1H_R

Bit 9 - SEGD1H Register Busy

pub fn segd2h(&self) -> SEGD2H_R

Bit 10 - SEGD2H Register Busy

pub fn segd3h(&self) -> SEGD3H_R

Bit 11 - SEGD3H Register Busy

pub fn segd4l(&self) -> SEGD4L_R

Bit 12 - SEGD4L Register Busy

pub fn segd5l(&self) -> SEGD5L_R

Bit 13 - SEGD5L Register Busy

pub fn segd6l(&self) -> SEGD6L_R

Bit 14 - SEGD6L Register Busy

pub fn segd7l(&self) -> SEGD7L_R

Bit 15 - SEGD7L Register Busy

pub fn segd4h(&self) -> SEGD4H_R

Bit 16 - SEGD4H Register Busy

pub fn segd5h(&self) -> SEGD5H_R

Bit 17 - SEGD5H Register Busy

pub fn segd6h(&self) -> SEGD6H_R

Bit 18 - SEGD6H Register Busy

pub fn segd7h(&self) -> SEGD7H_R

Bit 19 - SEGD7H Register Busy

impl R<u32, Reg<u32, _FRAMERATE>>

pub fn frdiv(&self) -> FRDIV_R

Bits 0:8 - Frame Rate Divider

impl R<u32, Reg<u32, _SEGEN2>>

pub fn segen2(&self) -> SEGEN2_R

Bits 0:7 - Segment Enable (second Group)

impl R<u32, Reg<u32, _CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - RTC Enable

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 1 - Debug Mode Run Enable

pub fn comp0top(&self) -> COMP0TOP_R

Bit 2 - Compare Channel 0 is Top Value

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:23 - Counter Value

impl R<u32, Reg<u32, _IF>>

pub fn of(&self) -> OF_R

Bit 0 - Overflow Interrupt Flag

pub fn comp(&self) -> COMP_R

Bits 1:6 - Compare Match X Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn of(&self) -> OF_R

Bit 0 - OF Interrupt Enable

pub fn comp(&self) -> COMP_R

Bits 1:6 - COMP Interrupt Enable

impl R<u32, Reg<u32, _COMPA_COMP>>

pub fn comp(&self) -> COMP_R

Bits 0:23 - Compare Value

impl R<u32, Reg<u32, _COMPB_COMP>>

pub fn comp(&self) -> COMP_R

Bits 0:23 - Compare Value

impl R<u32, Reg<u32, _COMPC_COMP>>

pub fn comp(&self) -> COMP_R

Bits 0:23 - Compare Value

impl R<u32, Reg<u32, _COMPD_COMP>>

pub fn comp(&self) -> COMP_R

Bits 0:23 - Compare Value

impl R<u32, Reg<u32, _COMPE_COMP>>

pub fn comp(&self) -> COMP_R

Bits 0:23 - Compare Value

impl R<u32, Reg<u32, _COMPF_COMP>>

pub fn comp(&self) -> COMP_R

Bits 0:23 - Compare Value

impl R<u8, CNTPRESC_A>

pub fn variant(&self) -> CNTPRESC_A

Get enumerated values variant

pub fn is_div1(&self) -> bool

Checks if the value of the field is DIV1

pub fn is_div2(&self) -> bool

Checks if the value of the field is DIV2

pub fn is_div4(&self) -> bool

Checks if the value of the field is DIV4

pub fn is_div8(&self) -> bool

Checks if the value of the field is DIV8

pub fn is_div16(&self) -> bool

Checks if the value of the field is DIV16

pub fn is_div32(&self) -> bool

Checks if the value of the field is DIV32

pub fn is_div64(&self) -> bool

Checks if the value of the field is DIV64

pub fn is_div128(&self) -> bool

Checks if the value of the field is DIV128

pub fn is_div256(&self) -> bool

Checks if the value of the field is DIV256

pub fn is_div512(&self) -> bool

Checks if the value of the field is DIV512

pub fn is_div1024(&self) -> bool

Checks if the value of the field is DIV1024

pub fn is_div2048(&self) -> bool

Checks if the value of the field is DIV2048

pub fn is_div4096(&self) -> bool

Checks if the value of the field is DIV4096

pub fn is_div8192(&self) -> bool

Checks if the value of the field is DIV8192

pub fn is_div16384(&self) -> bool

Checks if the value of the field is DIV16384

pub fn is_div32768(&self) -> bool

Checks if the value of the field is DIV32768

impl R<u32, Reg<u32, _CTRL>>

pub fn enable(&self) -> ENABLE_R

Bit 0 - RTCC Enable

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 2 - Debug Mode Run Enable

pub fn preccv0top(&self) -> PRECCV0TOP_R

Bit 4 - Pre-counter CCV0 Top Value Enable

pub fn ccv1top(&self) -> CCV1TOP_R

Bit 5 - CCV1 Top Value Enable

pub fn cntpresc(&self) -> CNTPRESC_R

Bits 8:11 - Counter Prescaler Value

pub fn cnttick(&self) -> CNTTICK_R

Bit 12 - Counter Prescaler Mode

pub fn bumodetsen(&self) -> BUMODETSEN_R

Bit 14 - Backup Mode Timestamp Enable

pub fn oscfdeten(&self) -> OSCFDETEN_R

Bit 15 - Oscillator Failure Detection Enable

pub fn cntmode(&self) -> CNTMODE_R

Bit 16 - Main Counter Mode

pub fn lyearcorrdis(&self) -> LYEARCORRDIS_R

Bit 17 - Leap Year Correction Disabled

impl R<u32, Reg<u32, _PRECNT>>

pub fn precnt(&self) -> PRECNT_R

Bits 0:14 - Pre-Counter Value

impl R<u32, Reg<u32, _CNT>>

pub fn cnt(&self) -> CNT_R

Bits 0:31 - Counter Value

impl R<u32, Reg<u32, _COMBCNT>>

pub fn precnt(&self) -> PRECNT_R

Bits 0:14 - Pre-Counter Value

pub fn cntlsb(&self) -> CNTLSB_R

Bits 15:31 - Counter Value

impl R<u32, Reg<u32, _TIME>>

pub fn secu(&self) -> SECU_R

Bits 0:3 - Seconds, Units

pub fn sect(&self) -> SECT_R

Bits 4:6 - Seconds, Tens

pub fn minu(&self) -> MINU_R

Bits 8:11 - Minutes, Units

pub fn mint(&self) -> MINT_R

Bits 12:14 - Minutes, Tens

pub fn houru(&self) -> HOURU_R

Bits 16:19 - Hours, Units

pub fn hourt(&self) -> HOURT_R

Bits 20:21 - Hours, Tens

impl R<u32, Reg<u32, _DATE>>

pub fn dayomu(&self) -> DAYOMU_R

Bits 0:3 - Day of Month, Units

pub fn dayomt(&self) -> DAYOMT_R

Bits 4:5 - Day of Month, Tens

pub fn monthu(&self) -> MONTHU_R

Bits 8:11 - Month, Units

pub fn montht(&self) -> MONTHT_R

Bit 12 - Month, Tens

pub fn yearu(&self) -> YEARU_R

Bits 16:19 - Year, Units

pub fn yeart(&self) -> YEART_R

Bits 20:23 - Year, Tens

pub fn dayow(&self) -> DAYOW_R

Bits 24:26 - Day of Week

impl R<u32, Reg<u32, _IF>>

pub fn of(&self) -> OF_R

Bit 0 - Overflow Interrupt Flag

pub fn cc0(&self) -> CC0_R

Bit 1 - Channel 0 Interrupt Flag

pub fn cc1(&self) -> CC1_R

Bit 2 - Channel 1 Interrupt Flag

pub fn cc2(&self) -> CC2_R

Bit 3 - Channel 2 Interrupt Flag

pub fn oscfail(&self) -> OSCFAIL_R

Bit 4 - Oscillator Failure Interrupt Flag

pub fn cnttick(&self) -> CNTTICK_R

Bit 5 - Main Counter Tick

pub fn mintick(&self) -> MINTICK_R

Bit 6 - Minute Tick

pub fn hourtick(&self) -> HOURTICK_R

Bit 7 - Hour Tick

pub fn daytick(&self) -> DAYTICK_R

Bit 8 - Day Tick

pub fn dayowof(&self) -> DAYOWOF_R

Bit 9 - Day of Week Overflow

pub fn monthtick(&self) -> MONTHTICK_R

Bit 10 - Month Tick

impl R<u32, Reg<u32, _IEN>>

pub fn of(&self) -> OF_R

Bit 0 - OF Interrupt Enable

pub fn cc0(&self) -> CC0_R

Bit 1 - CC0 Interrupt Enable

pub fn cc1(&self) -> CC1_R

Bit 2 - CC1 Interrupt Enable

pub fn cc2(&self) -> CC2_R

Bit 3 - CC2 Interrupt Enable

pub fn oscfail(&self) -> OSCFAIL_R

Bit 4 - OSCFAIL Interrupt Enable

pub fn cnttick(&self) -> CNTTICK_R

Bit 5 - CNTTICK Interrupt Enable

pub fn mintick(&self) -> MINTICK_R

Bit 6 - MINTICK Interrupt Enable

pub fn hourtick(&self) -> HOURTICK_R

Bit 7 - HOURTICK Interrupt Enable

pub fn daytick(&self) -> DAYTICK_R

Bit 8 - DAYTICK Interrupt Enable

pub fn dayowof(&self) -> DAYOWOF_R

Bit 9 - DAYOWOF Interrupt Enable

pub fn monthtick(&self) -> MONTHTICK_R

Bit 10 - MONTHTICK Interrupt Enable

impl R<u32, Reg<u32, _STATUS>>

pub fn bumodets(&self) -> BUMODETS_R

Bit 0 - Timestamp for Backup Mode Entry Stored

impl R<u32, Reg<u32, _SYNCBUSY>>

pub fn cmd(&self) -> CMD_R

Bit 5 - CMD Register Busy

impl R<u32, Reg<u32, _POWERDOWN>>

pub fn ram(&self) -> RAM_R

Bit 0 - Retention RAM Power-down

impl R<u16, LOCKKEY_A>

pub fn variant(&self) -> Variant<u16, LOCKKEY_A>

Get enumerated values variant

pub fn is_unlocked(&self) -> bool

Checks if the value of the field is UNLOCKED

pub fn is_locked(&self) -> bool

Checks if the value of the field is LOCKED

impl R<u32, Reg<u32, _LOCK>>

pub fn lockkey(&self) -> LOCKKEY_R

Bits 0:15 - Configuration Lock Key

impl R<u32, Reg<u32, _EM4WUEN>>

pub fn em4wu(&self) -> EM4WU_R

Bit 0 - EM4 Wake-up Enable

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_pulse(&self) -> bool

Checks if the value of the field is PULSE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _CC0_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn cmoa(&self) -> CMOA_R

Bits 2:3 - Compare Match Output Action

pub fn icedge(&self) -> ICEDGE_R

Bits 4:5 - Input Capture Edge Select

pub fn prssel(&self) -> PRSSEL_R

Bits 6:10 - Compare/Capture Channel PRS Input Channel Selection

pub fn compbase(&self) -> COMPBASE_R

Bit 11 - Capture Compare Channel Comparison Base

pub fn compmask(&self) -> COMPMASK_R

Bits 12:16 - Capture Compare Channel Comparison Mask

pub fn daycc(&self) -> DAYCC_R

Bit 17 - Day Capture/Compare Selection

impl R<u32, Reg<u32, _CC0_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - Capture/Compare Value

impl R<u32, Reg<u32, _CC0_TIME>>

pub fn secu(&self) -> SECU_R

Bits 0:3 - Seconds, Units

pub fn sect(&self) -> SECT_R

Bits 4:6 - Seconds, Tens

pub fn minu(&self) -> MINU_R

Bits 8:11 - Minutes, Units

pub fn mint(&self) -> MINT_R

Bits 12:14 - Minutes, Tens

pub fn houru(&self) -> HOURU_R

Bits 16:19 - Hours, Units

pub fn hourt(&self) -> HOURT_R

Bits 20:21 - Hours, Tens

impl R<u32, Reg<u32, _CC0_DATE>>

pub fn dayu(&self) -> DAYU_R

Bits 0:3 - Day of Month/week, Units

pub fn dayt(&self) -> DAYT_R

Bits 4:5 - Day of Month/week, Tens

pub fn monthu(&self) -> MONTHU_R

Bits 8:11 - Month, Units

pub fn montht(&self) -> MONTHT_R

Bit 12 - Month, Tens

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_pulse(&self) -> bool

Checks if the value of the field is PULSE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _CC1_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn cmoa(&self) -> CMOA_R

Bits 2:3 - Compare Match Output Action

pub fn icedge(&self) -> ICEDGE_R

Bits 4:5 - Input Capture Edge Select

pub fn prssel(&self) -> PRSSEL_R

Bits 6:10 - Compare/Capture Channel PRS Input Channel Selection

pub fn compbase(&self) -> COMPBASE_R

Bit 11 - Capture Compare Channel Comparison Base

pub fn compmask(&self) -> COMPMASK_R

Bits 12:16 - Capture Compare Channel Comparison Mask

pub fn daycc(&self) -> DAYCC_R

Bit 17 - Day Capture/Compare Selection

impl R<u32, Reg<u32, _CC1_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - Capture/Compare Value

impl R<u32, Reg<u32, _CC1_TIME>>

pub fn secu(&self) -> SECU_R

Bits 0:3 - Seconds, Units

pub fn sect(&self) -> SECT_R

Bits 4:6 - Seconds, Tens

pub fn minu(&self) -> MINU_R

Bits 8:11 - Minutes, Units

pub fn mint(&self) -> MINT_R

Bits 12:14 - Minutes, Tens

pub fn houru(&self) -> HOURU_R

Bits 16:19 - Hours, Units

pub fn hourt(&self) -> HOURT_R

Bits 20:21 - Hours, Tens

impl R<u32, Reg<u32, _CC1_DATE>>

pub fn dayu(&self) -> DAYU_R

Bits 0:3 - Day of Month/week, Units

pub fn dayt(&self) -> DAYT_R

Bits 4:5 - Day of Month/week, Tens

pub fn monthu(&self) -> MONTHU_R

Bits 8:11 - Month, Units

pub fn montht(&self) -> MONTHT_R

Bit 12 - Month, Tens

impl R<u8, MODE_A>

pub fn variant(&self) -> Variant<u8, MODE_A>

Get enumerated values variant

pub fn is_off(&self) -> bool

Checks if the value of the field is OFF

pub fn is_inputcapture(&self) -> bool

Checks if the value of the field is INPUTCAPTURE

pub fn is_outputcompare(&self) -> bool

Checks if the value of the field is OUTPUTCOMPARE

impl R<u8, CMOA_A>

pub fn variant(&self) -> CMOA_A

Get enumerated values variant

pub fn is_pulse(&self) -> bool

Checks if the value of the field is PULSE

pub fn is_toggle(&self) -> bool

Checks if the value of the field is TOGGLE

pub fn is_clear(&self) -> bool

Checks if the value of the field is CLEAR

pub fn is_set(&self) -> bool

Checks if the value of the field is SET

impl R<u8, ICEDGE_A>

pub fn variant(&self) -> ICEDGE_A

Get enumerated values variant

pub fn is_rising(&self) -> bool

Checks if the value of the field is RISING

pub fn is_falling(&self) -> bool

Checks if the value of the field is FALLING

pub fn is_both(&self) -> bool

Checks if the value of the field is BOTH

pub fn is_none(&self) -> bool

Checks if the value of the field is NONE

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _CC2_CTRL>>

pub fn mode(&self) -> MODE_R

Bits 0:1 - CC Channel Mode

pub fn cmoa(&self) -> CMOA_R

Bits 2:3 - Compare Match Output Action

pub fn icedge(&self) -> ICEDGE_R

Bits 4:5 - Input Capture Edge Select

pub fn prssel(&self) -> PRSSEL_R

Bits 6:10 - Compare/Capture Channel PRS Input Channel Selection

pub fn compbase(&self) -> COMPBASE_R

Bit 11 - Capture Compare Channel Comparison Base

pub fn compmask(&self) -> COMPMASK_R

Bits 12:16 - Capture Compare Channel Comparison Mask

pub fn daycc(&self) -> DAYCC_R

Bit 17 - Day Capture/Compare Selection

impl R<u32, Reg<u32, _CC2_CCV>>

pub fn ccv(&self) -> CCV_R

Bits 0:31 - Capture/Compare Value

impl R<u32, Reg<u32, _CC2_TIME>>

pub fn secu(&self) -> SECU_R

Bits 0:3 - Seconds, Units

pub fn sect(&self) -> SECT_R

Bits 4:6 - Seconds, Tens

pub fn minu(&self) -> MINU_R

Bits 8:11 - Minutes, Units

pub fn mint(&self) -> MINT_R

Bits 12:14 - Minutes, Tens

pub fn houru(&self) -> HOURU_R

Bits 16:19 - Hours, Units

pub fn hourt(&self) -> HOURT_R

Bits 20:21 - Hours, Tens

impl R<u32, Reg<u32, _CC2_DATE>>

pub fn dayu(&self) -> DAYU_R

Bits 0:3 - Day of Month/week, Units

pub fn dayt(&self) -> DAYT_R

Bits 4:5 - Day of Month/week, Tens

pub fn monthu(&self) -> MONTHU_R

Bits 8:11 - Month, Units

pub fn montht(&self) -> MONTHT_R

Bit 12 - Month, Tens

impl R<u32, Reg<u32, _RET0_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET1_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET2_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET3_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET4_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET5_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET6_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET7_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET8_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET9_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET10_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET11_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET12_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET13_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET14_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET15_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET16_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET17_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET18_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET19_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET20_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET21_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET22_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET23_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET24_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET25_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET26_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET27_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET28_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET29_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET30_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u32, Reg<u32, _RET31_REG>>

pub fn reg(&self) -> REG_R

Bits 0:31 - General Purpose Retention Register

impl R<u8, CLKSEL_A>

pub fn variant(&self) -> CLKSEL_A

Get enumerated values variant

pub fn is_ulfrco(&self) -> bool

Checks if the value of the field is ULFRCO

pub fn is_lfrco(&self) -> bool

Checks if the value of the field is LFRCO

pub fn is_lfxo(&self) -> bool

Checks if the value of the field is LFXO

pub fn is_hfcoreclk(&self) -> bool

Checks if the value of the field is HFCORECLK

impl R<u32, Reg<u32, _CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Watchdog Timer Enable

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 1 - Debug Mode Run Enable

pub fn em2run(&self) -> EM2RUN_R

Bit 2 - Energy Mode 2 Run Enable

pub fn em3run(&self) -> EM3RUN_R

Bit 3 - Energy Mode 3 Run Enable

pub fn lock(&self) -> LOCK_R

Bit 4 - Configuration Lock

pub fn em4block(&self) -> EM4BLOCK_R

Bit 5 - Energy Mode 4 Block

pub fn swoscblock(&self) -> SWOSCBLOCK_R

Bit 6 - Software Oscillator Disable Block

pub fn persel(&self) -> PERSEL_R

Bits 8:11 - Watchdog Timeout Period Select

pub fn clksel(&self) -> CLKSEL_R

Bits 12:13 - Watchdog Clock Select

pub fn warnsel(&self) -> WARNSEL_R

Bits 16:17 - Watchdog Timeout Period Select

pub fn winsel(&self) -> WINSEL_R

Bits 24:26 - Watchdog Illegal Window Select

pub fn clrsrc(&self) -> CLRSRC_R

Bit 30 - Watchdog Clear Source

pub fn wdogrstdis(&self) -> WDOGRSTDIS_R

Bit 31 - Watchdog Reset Disable

impl R<u32, Reg<u32, _SYNCBUSY>>

pub fn ctrl(&self) -> CTRL_R

Bit 0 - CTRL Register Busy

pub fn cmd(&self) -> CMD_R

Bit 1 - CMD Register Busy

pub fn pch0_prsctrl(&self) -> PCH0_PRSCTRL_R

Bit 2 - PCH0_PRSCTRL Register Busy

pub fn pch1_prsctrl(&self) -> PCH1_PRSCTRL_R

Bit 3 - PCH1_PRSCTRL Register Busy

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _PCH0_PRSCTRL>>

pub fn prssel(&self) -> PRSSEL_R

Bits 0:4 - PRS Channel PRS Select

pub fn prsmissrsten(&self) -> PRSMISSRSTEN_R

Bit 8 - PRS Missing Event Will Trigger a Watchdog Reset

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _PCH1_PRSCTRL>>

pub fn prssel(&self) -> PRSSEL_R

Bits 0:4 - PRS Channel PRS Select

pub fn prsmissrsten(&self) -> PRSMISSRSTEN_R

Bit 8 - PRS Missing Event Will Trigger a Watchdog Reset

impl R<u32, Reg<u32, _IF>>

pub fn tout(&self) -> TOUT_R

Bit 0 - WDOG Timeout Interrupt Flag

pub fn warn(&self) -> WARN_R

Bit 1 - WDOG Warning Timeout Interrupt Flag

pub fn win(&self) -> WIN_R

Bit 2 - WDOG Window Interrupt Flag

pub fn pem0(&self) -> PEM0_R

Bit 3 - PRS Channel Zero Event Missing Interrupt Flag

pub fn pem1(&self) -> PEM1_R

Bit 4 - PRS Channel One Event Missing Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn tout(&self) -> TOUT_R

Bit 0 - TOUT Interrupt Enable

pub fn warn(&self) -> WARN_R

Bit 1 - WARN Interrupt Enable

pub fn win(&self) -> WIN_R

Bit 2 - WIN Interrupt Enable

pub fn pem0(&self) -> PEM0_R

Bit 3 - PEM0 Interrupt Enable

pub fn pem1(&self) -> PEM1_R

Bit 4 - PEM1 Interrupt Enable

impl R<u8, CLKSEL_A>

pub fn variant(&self) -> CLKSEL_A

Get enumerated values variant

pub fn is_ulfrco(&self) -> bool

Checks if the value of the field is ULFRCO

pub fn is_lfrco(&self) -> bool

Checks if the value of the field is LFRCO

pub fn is_lfxo(&self) -> bool

Checks if the value of the field is LFXO

pub fn is_hfcoreclk(&self) -> bool

Checks if the value of the field is HFCORECLK

impl R<u32, Reg<u32, _CTRL>>

pub fn en(&self) -> EN_R

Bit 0 - Watchdog Timer Enable

pub fn debugrun(&self) -> DEBUGRUN_R

Bit 1 - Debug Mode Run Enable

pub fn em2run(&self) -> EM2RUN_R

Bit 2 - Energy Mode 2 Run Enable

pub fn em3run(&self) -> EM3RUN_R

Bit 3 - Energy Mode 3 Run Enable

pub fn lock(&self) -> LOCK_R

Bit 4 - Configuration Lock

pub fn em4block(&self) -> EM4BLOCK_R

Bit 5 - Energy Mode 4 Block

pub fn swoscblock(&self) -> SWOSCBLOCK_R

Bit 6 - Software Oscillator Disable Block

pub fn persel(&self) -> PERSEL_R

Bits 8:11 - Watchdog Timeout Period Select

pub fn clksel(&self) -> CLKSEL_R

Bits 12:13 - Watchdog Clock Select

pub fn warnsel(&self) -> WARNSEL_R

Bits 16:17 - Watchdog Timeout Period Select

pub fn winsel(&self) -> WINSEL_R

Bits 24:26 - Watchdog Illegal Window Select

pub fn clrsrc(&self) -> CLRSRC_R

Bit 30 - Watchdog Clear Source

pub fn wdogrstdis(&self) -> WDOGRSTDIS_R

Bit 31 - Watchdog Reset Disable

impl R<u32, Reg<u32, _SYNCBUSY>>

pub fn ctrl(&self) -> CTRL_R

Bit 0 - CTRL Register Busy

pub fn cmd(&self) -> CMD_R

Bit 1 - CMD Register Busy

pub fn pch0_prsctrl(&self) -> PCH0_PRSCTRL_R

Bit 2 - PCH0_PRSCTRL Register Busy

pub fn pch1_prsctrl(&self) -> PCH1_PRSCTRL_R

Bit 3 - PCH1_PRSCTRL Register Busy

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _PCH0_PRSCTRL>>

pub fn prssel(&self) -> PRSSEL_R

Bits 0:4 - PRS Channel PRS Select

pub fn prsmissrsten(&self) -> PRSMISSRSTEN_R

Bit 8 - PRS Missing Event Will Trigger a Watchdog Reset

impl R<u8, PRSSEL_A>

pub fn variant(&self) -> Variant<u8, PRSSEL_A>

Get enumerated values variant

pub fn is_prsch0(&self) -> bool

Checks if the value of the field is PRSCH0

pub fn is_prsch1(&self) -> bool

Checks if the value of the field is PRSCH1

pub fn is_prsch2(&self) -> bool

Checks if the value of the field is PRSCH2

pub fn is_prsch3(&self) -> bool

Checks if the value of the field is PRSCH3

pub fn is_prsch4(&self) -> bool

Checks if the value of the field is PRSCH4

pub fn is_prsch5(&self) -> bool

Checks if the value of the field is PRSCH5

pub fn is_prsch6(&self) -> bool

Checks if the value of the field is PRSCH6

pub fn is_prsch7(&self) -> bool

Checks if the value of the field is PRSCH7

pub fn is_prsch8(&self) -> bool

Checks if the value of the field is PRSCH8

pub fn is_prsch9(&self) -> bool

Checks if the value of the field is PRSCH9

pub fn is_prsch10(&self) -> bool

Checks if the value of the field is PRSCH10

pub fn is_prsch11(&self) -> bool

Checks if the value of the field is PRSCH11

pub fn is_prsch12(&self) -> bool

Checks if the value of the field is PRSCH12

pub fn is_prsch13(&self) -> bool

Checks if the value of the field is PRSCH13

pub fn is_prsch14(&self) -> bool

Checks if the value of the field is PRSCH14

pub fn is_prsch15(&self) -> bool

Checks if the value of the field is PRSCH15

pub fn is_prsch16(&self) -> bool

Checks if the value of the field is PRSCH16

pub fn is_prsch17(&self) -> bool

Checks if the value of the field is PRSCH17

pub fn is_prsch18(&self) -> bool

Checks if the value of the field is PRSCH18

pub fn is_prsch19(&self) -> bool

Checks if the value of the field is PRSCH19

pub fn is_prsch20(&self) -> bool

Checks if the value of the field is PRSCH20

pub fn is_prsch21(&self) -> bool

Checks if the value of the field is PRSCH21

pub fn is_prsch22(&self) -> bool

Checks if the value of the field is PRSCH22

pub fn is_prsch23(&self) -> bool

Checks if the value of the field is PRSCH23

impl R<u32, Reg<u32, _PCH1_PRSCTRL>>

pub fn prssel(&self) -> PRSSEL_R

Bits 0:4 - PRS Channel PRS Select

pub fn prsmissrsten(&self) -> PRSMISSRSTEN_R

Bit 8 - PRS Missing Event Will Trigger a Watchdog Reset

impl R<u32, Reg<u32, _IF>>

pub fn tout(&self) -> TOUT_R

Bit 0 - WDOG Timeout Interrupt Flag

pub fn warn(&self) -> WARN_R

Bit 1 - WDOG Warning Timeout Interrupt Flag

pub fn win(&self) -> WIN_R

Bit 2 - WDOG Window Interrupt Flag

pub fn pem0(&self) -> PEM0_R

Bit 3 - PRS Channel Zero Event Missing Interrupt Flag

pub fn pem1(&self) -> PEM1_R

Bit 4 - PRS Channel One Event Missing Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn tout(&self) -> TOUT_R

Bit 0 - TOUT Interrupt Enable

pub fn warn(&self) -> WARN_R

Bit 1 - WARN Interrupt Enable

pub fn win(&self) -> WIN_R

Bit 2 - WIN Interrupt Enable

pub fn pem0(&self) -> PEM0_R

Bit 3 - PEM0 Interrupt Enable

pub fn pem1(&self) -> PEM1_R

Bit 4 - PEM1 Interrupt Enable

impl R<u32, Reg<u32, _ETMCR>>

pub fn powerdwn(&self) -> POWERDWN_R

Bit 0 - ETM Control in low power mode

pub fn portsize(&self) -> PORTSIZE_R

Bits 4:6 - ETM Port Size

pub fn stall(&self) -> STALL_R

Bit 7 - Stall Processor

pub fn branchoutput(&self) -> BRANCHOUTPUT_R

Bit 8 - Branch Output

pub fn dbgreqctrl(&self) -> DBGREQCTRL_R

Bit 9 - Debug Request Control

pub fn etmprog(&self) -> ETMPROG_R

Bit 10 - ETM Programming

pub fn etmportsel(&self) -> ETMPORTSEL_R

Bit 11 - ETM Port Selection

pub fn portmode2(&self) -> PORTMODE2_R

Bit 13 - Port Mode[2]

pub fn portmode(&self) -> PORTMODE_R

Bits 16:17 - Port Mode Control

pub fn eportsize(&self) -> EPORTSIZE_R

Bits 21:22 - Port Size[3]

pub fn tstampen(&self) -> TSTAMPEN_R

Bit 28 - Time Stamp Enable

impl R<u8, EXTINPNUM_A>

pub fn variant(&self) -> Variant<u8, EXTINPNUM_A>

Get enumerated values variant

pub fn is_zero(&self) -> bool

Checks if the value of the field is ZERO

pub fn is_one(&self) -> bool

Checks if the value of the field is ONE

pub fn is_two(&self) -> bool

Checks if the value of the field is TWO

impl R<u32, Reg<u32, _ETMCCR>>

pub fn adrcmppair(&self) -> ADRCMPPAIR_R

Bits 0:3 - Number of Address Comparator Pairs

pub fn datacmpnum(&self) -> DATACMPNUM_R

Bits 4:7 - Number of Data Value Comparators

pub fn mmdeccnt(&self) -> MMDECCNT_R

Bits 8:12 - Number of Memeory Map Decoders

pub fn countnum(&self) -> COUNTNUM_R

Bits 13:15 - Number of Counters

pub fn seqpres(&self) -> SEQPRES_R

Bit 16 - Sequencer Present

pub fn extinpnum(&self) -> EXTINPNUM_R

Bits 17:19 - Number of External Inputs

pub fn extoutnum(&self) -> EXTOUTNUM_R

Bits 20:22 - Number of External Output

pub fn fifofullpres(&self) -> FIFOFULLPRES_R

Bit 23 - FIFIO FULL present

pub fn idcompnum(&self) -> IDCOMPNUM_R

Bits 24:25 - Number of context ID Comparators

pub fn tracess(&self) -> TRACESS_R

Bit 26 - Trace Start/Stop Block Present

pub fn mmaccess(&self) -> MMACCESS_R

Bit 27 - Coprocessor and Memeory Access

pub fn etmid(&self) -> ETMID_R

Bit 31 - ETM ID Register Present

impl R<u32, Reg<u32, _ETMTRIGGER>>

pub fn resa(&self) -> RESA_R

Bits 0:6 - ETM Resource A

pub fn resb(&self) -> RESB_R

Bits 7:13 - ETM Resource B

pub fn etmfcn(&self) -> ETMFCN_R

Bits 14:16 - ETM Function

impl R<u32, Reg<u32, _ETMSR>>

pub fn ethof(&self) -> ETHOF_R

Bit 0 - ETM Overflow

pub fn etmprogbit(&self) -> ETMPROGBIT_R

Bit 1 - ETM Programming Bit Status

pub fn tracestat(&self) -> TRACESTAT_R

Bit 2 - Trace Start/Stop Status

pub fn trigbit(&self) -> TRIGBIT_R

Bit 3 - Trigger Bit

impl R<u32, Reg<u32, _ETMSCR>>

pub fn maxportsize(&self) -> MAXPORTSIZE_R

Bits 0:2 - Maximum Port Size

pub fn fifofull(&self) -> FIFOFULL_R

Bit 8 - FIFO FULL Supported

pub fn maxportsize3(&self) -> MAXPORTSIZE3_R

Bit 9 - Max Port Size[3]

pub fn portsize(&self) -> PORTSIZE_R

Bit 10 - Port Size Supported

pub fn portmode(&self) -> PORTMODE_R

Bit 11 - Port Mode Supported

pub fn procnum(&self) -> PROCNUM_R

Bits 12:14 - Number of Supported Processros

pub fn nofetchcomp(&self) -> NOFETCHCOMP_R

Bit 17 - No Fetch Comparison

impl R<u32, Reg<u32, _ETMTEEVR>>

pub fn resa(&self) -> RESA_R

Bits 0:6 - ETM Resource A Trace Enable

pub fn resb(&self) -> RESB_R

Bits 7:13 - ETM Resource B Trace Enable

pub fn etmfcnen(&self) -> ETMFCNEN_R

Bits 14:16 - ETM Function Trace Enable

impl R<u32, Reg<u32, _ETMTECR1>>

pub fn adrcmp(&self) -> ADRCMP_R

Bits 0:7 - Address Comparator

pub fn memmap(&self) -> MEMMAP_R

Bits 8:23 - Memmap

pub fn incexctl(&self) -> INCEXCTL_R

Bit 24 - Trace Include/Exclude Flag

pub fn tce(&self) -> TCE_R

Bit 25 - Trace Control Enable

impl R<u32, Reg<u32, _ETMFFLR>>

pub fn bytenum(&self) -> BYTENUM_R

Bits 0:7 - Bytes left in FIFO

impl R<u32, Reg<u32, _ETMCNTRLDVR1>>

pub fn count(&self) -> COUNT_R

Bits 0:15 - Free running counter reload value

impl R<u32, Reg<u32, _ETMSYNCFR>>

pub fn freq(&self) -> FREQ_R

Bits 0:11 - Synchronisation Frequency Value

impl R<u32, Reg<u32, _ETMIDR>>

pub fn impver(&self) -> IMPVER_R

Bits 0:3 - Implementation Revision

pub fn etmminver(&self) -> ETMMINVER_R

Bits 4:7 - Minor ETM Architecture Version

pub fn etmmajver(&self) -> ETMMAJVER_R

Bits 8:11 - Major ETM Architecture Version

pub fn procfam(&self) -> PROCFAM_R

Bits 12:15 - Implementer Code

pub fn lpcf(&self) -> LPCF_R

Bit 16 - Load PC First

pub fn thumbt(&self) -> THUMBT_R

Bit 18 - 32-bit Thumb Instruction Tracing

pub fn secext(&self) -> SECEXT_R

Bit 19 - Security Extension Support

pub fn bpe(&self) -> BPE_R

Bit 20 - Branch Packet Encoding

pub fn impcode(&self) -> IMPCODE_R

Bits 24:31 - Implementer Code

impl R<u32, Reg<u32, _ETMCCER>>

pub fn extinpsel(&self) -> EXTINPSEL_R

Bits 0:1 - Extended External Input Selectors

pub fn extinpbus(&self) -> EXTINPBUS_R

Bits 3:10 - Extended External Input Bus

pub fn readregs(&self) -> READREGS_R

Bit 11 - Readable Registers

pub fn daddrcmp(&self) -> DADDRCMP_R

Bit 12 - Data Address comparisons

pub fn instres(&self) -> INSTRES_R

Bits 13:15 - Instrumentation Resources

pub fn eicewpnt(&self) -> EICEWPNT_R

Bits 16:19 - EmbeddedICE watchpoint inputs

pub fn teicewpnt(&self) -> TEICEWPNT_R

Bit 20 - Trace Sart/Stop Block Uses EmbeddedICE watchpoint inputs

pub fn eiceimp(&self) -> EICEIMP_R

Bit 21 - EmbeddedICE Behavior control Implemented

pub fn timp(&self) -> TIMP_R

Bit 22 - Timestamping Implemented

pub fn rfcnt(&self) -> RFCNT_R

Bit 27 - Reduced Function Counter

pub fn tenc(&self) -> TENC_R

Bit 28 - Timestamp Encoding

pub fn tsize(&self) -> TSIZE_R

Bit 29 - Timestamp Size

impl R<u32, Reg<u32, _ETMTESSEICR>>

pub fn startrsel(&self) -> STARTRSEL_R

Bits 0:3 - Stop Resource Selection

pub fn stoprsel(&self) -> STOPRSEL_R

Bits 16:19 - Stop Resource Selection

impl R<u32, Reg<u32, _ETMTSEVR>>

pub fn resaevt(&self) -> RESAEVT_R

Bits 0:6 - ETM Resource A Event

pub fn resbevt(&self) -> RESBEVT_R

Bits 7:13 - ETM Resource B Event

pub fn etmfcnevt(&self) -> ETMFCNEVT_R

Bits 14:16 - ETM Function Event

impl R<u32, Reg<u32, _ETMTRACEIDR>>

pub fn traceid(&self) -> TRACEID_R

Bits 0:6 - Trace ID

impl R<u32, Reg<u32, _ETMIDR2>>

pub fn rfe(&self) -> RFE_R

Bit 0 - RFE Transfer Order

pub fn swp(&self) -> SWP_R

Bit 1 - SWP Transfer Order

impl R<u32, Reg<u32, _ETMPDSR>>

pub fn etmup(&self) -> ETMUP_R

Bit 0 - ETM Powered Up

impl R<u32, Reg<u32, _ETMISCIN>>

pub fn extin(&self) -> EXTIN_R

Bits 0:1 - EXTIN Value

pub fn corehalt(&self) -> COREHALT_R

Bit 4 - Core Halt

impl R<u32, Reg<u32, _ITTRIGOUT>>

pub fn triggerout(&self) -> TRIGGEROUT_R

Bit 0 - Trigger output value

impl R<u32, Reg<u32, _ETMITATBCTR2>>

pub fn atready(&self) -> ATREADY_R

Bit 0 - ATREADY Input Value

impl R<u32, Reg<u32, _ETMITATBCTR0>>

pub fn atvalid(&self) -> ATVALID_R

Bit 0 - ATVALID Output Value

impl R<u32, Reg<u32, _ETMITCTRL>>

pub fn iten(&self) -> ITEN_R

Bit 0 - Integration Mode Enable

impl R<u32, Reg<u32, _ETMCLAIMSET>>

pub fn settag(&self) -> SETTAG_R

Bits 0:7 - Tag Bits

impl R<u32, Reg<u32, _ETMCLAIMCLR>>

pub fn clrtag(&self) -> CLRTAG_R

Bit 0 - Tag Bits

impl R<u32, Reg<u32, _ETMLAR>>

pub fn key(&self) -> KEY_R

Bit 0 - Key Value

impl R<u32, Reg<u32, _ETMLSR>>

pub fn lockimp(&self) -> LOCKIMP_R

Bit 0 - ETM Locking Implemented

pub fn locked(&self) -> LOCKED_R

Bit 1 - ETM locked

impl R<u8, NONSECNONINVDBG_A>

pub fn variant(&self) -> Variant<u8, NONSECNONINVDBG_A>

Get enumerated values variant

pub fn is_disable(&self) -> bool

Checks if the value of the field is DISABLE

pub fn is_enable(&self) -> bool

Checks if the value of the field is ENABLE

impl R<u32, Reg<u32, _ETMAUTHSTATUS>>

pub fn nonsecinvdbg(&self) -> NONSECINVDBG_R

Bits 0:1 - Non-secure invasive Debug Status

pub fn nonsecnoninvdbg(&self) -> NONSECNONINVDBG_R

Bits 2:3 - Non-secure non-invasive Debug Status

pub fn secinvdbg(&self) -> SECINVDBG_R

Bits 4:5 - Secure invasive Debug Status

pub fn secnoninvdbg(&self) -> SECNONINVDBG_R

Bits 6:7 - Secure non-invasive Debug Status

impl R<u32, Reg<u32, _ETMDEVTYPE>>

pub fn tracesrc(&self) -> TRACESRC_R

Bits 0:3 - Trace Source

pub fn proctrace(&self) -> PROCTRACE_R

Bits 4:7 - Processor Trace

impl R<u32, Reg<u32, _ETMPIDR4>>

pub fn contcode(&self) -> CONTCODE_R

Bits 0:3 - JEP106 Continuation Code

pub fn count(&self) -> COUNT_R

Bits 4:7 - 4KB Count

impl R<u32, Reg<u32, _ETMPIDR0>>

pub fn partnum(&self) -> PARTNUM_R

Bits 0:7 - Part Number

impl R<u32, Reg<u32, _ETMPIDR1>>

pub fn partnum(&self) -> PARTNUM_R

Bits 0:3 - Part Number

pub fn idcode(&self) -> IDCODE_R

Bits 4:7 - JEP106 Identity Code

impl R<u32, Reg<u32, _ETMPIDR2>>

pub fn idcode(&self) -> IDCODE_R

Bits 0:2 - JEP106 Identity Code

pub fn always1(&self) -> ALWAYS1_R

Bit 3 - Always 1

pub fn rev(&self) -> REV_R

Bits 4:7 - Revision

impl R<u32, Reg<u32, _ETMPIDR3>>

pub fn custmod(&self) -> CUSTMOD_R

Bits 0:3 - Customer Modified

pub fn revand(&self) -> REVAND_R

Bits 4:7 - RevAnd

impl R<u32, Reg<u32, _ETMCIDR0>>

pub fn preamb(&self) -> PREAMB_R

Bits 0:7 - CoreSight Preamble

impl R<u32, Reg<u32, _ETMCIDR1>>

pub fn preamb(&self) -> PREAMB_R

Bits 0:7 - CoreSight Preamble

impl R<u32, Reg<u32, _ETMCIDR2>>

pub fn preamb(&self) -> PREAMB_R

Bits 0:7 - CoreSight Preamble

impl R<u32, Reg<u32, _ETMCIDR3>>

pub fn preamb(&self) -> PREAMB_R

Bits 0:7 - CoreSight Preamble

impl R<u32, Reg<u32, _IF>>

pub fn ppupriv(&self) -> PPUPRIV_R

Bit 0 - PPU Privilege Interrupt Flag

impl R<u32, Reg<u32, _IEN>>

pub fn ppupriv(&self) -> PPUPRIV_R

Bit 0 - PPUPRIV Interrupt Enable

impl R<u32, Reg<u32, _PPUCTRL>>

pub fn enable(&self) -> ENABLE_R

Bit 0

impl R<u32, Reg<u32, _PPUPATD0>>

pub fn acmp0(&self) -> ACMP0_R

Bit 0 - Analog Comparator 0 access control bit

pub fn acmp1(&self) -> ACMP1_R

Bit 1 - Analog Comparator 1 access control bit

pub fn acmp2(&self) -> ACMP2_R

Bit 2 - Analog Comparator 1 access control bit

pub fn acmp3(&self) -> ACMP3_R

Bit 3 - Analog Comparator 3 access control bit

pub fn adc0(&self) -> ADC0_R

Bit 4 - Analog to Digital Converter 0 access control bit

pub fn adc1(&self) -> ADC1_R

Bit 5 - Analog to Digital Converter 0 access control bit

pub fn can0(&self) -> CAN0_R

Bit 6 - CAN 0 access control bit

pub fn can1(&self) -> CAN1_R

Bit 7 - CAN 1 access control bit

pub fn cmu(&self) -> CMU_R

Bit 8 - Clock Management Unit access control bit

pub fn cryotimer(&self) -> CRYOTIMER_R

Bit 9 - CRYOTIMER access control bit

pub fn crypto0(&self) -> CRYPTO0_R

Bit 10 - Advanced Encryption Standard Accelerator access control bit

pub fn csen(&self) -> CSEN_R

Bit 11 - Capacitive touch sense module access control bit

pub fn vdac0(&self) -> VDAC0_R

Bit 12 - Digital to Analog Converter 0 access control bit

pub fn prs(&self) -> PRS_R

Bit 13 - Peripheral Reflex System access control bit

pub fn ebi(&self) -> EBI_R

Bit 14 - External Bus Interface access control bit

pub fn emu(&self) -> EMU_R

Bit 15 - Energy Management Unit access control bit

pub fn eth(&self) -> ETH_R

Bit 16 - Ethernet Controller access control bit

pub fn fpueh(&self) -> FPUEH_R

Bit 17 - FPU Exception Handler access control bit

pub fn gpcrc(&self) -> GPCRC_R

Bit 18 - General Purpose CRC access control bit

pub fn gpio(&self) -> GPIO_R

Bit 19 - General purpose Input/Output access control bit

pub fn i2c0(&self) -> I2C0_R

Bit 20 - I2C 0 access control bit

pub fn i2c1(&self) -> I2C1_R

Bit 21 - I2C 1 access control bit

pub fn i2c2(&self) -> I2C2_R

Bit 22 - I2C 2 access control bit

pub fn idac0(&self) -> IDAC0_R

Bit 23 - Current Digital to Analog Converter 0 access control bit

pub fn msc(&self) -> MSC_R

Bit 24 - Memory System Controller access control bit

pub fn lcd(&self) -> LCD_R

Bit 25 - Liquid Crystal Display Controller access control bit

pub fn ldma(&self) -> LDMA_R

Bit 26 - Linked Direct Memory Access Controller access control bit

pub fn lesense(&self) -> LESENSE_R

Bit 27 - Low Energy Sensor Interface access control bit

pub fn letimer0(&self) -> LETIMER0_R

Bit 28 - Low Energy Timer 0 access control bit

pub fn letimer1(&self) -> LETIMER1_R

Bit 29 - Low Energy Timer 1 access control bit

pub fn leuart0(&self) -> LEUART0_R

Bit 30 - Low Energy UART 0 access control bit

pub fn leuart1(&self) -> LEUART1_R

Bit 31 - Low Energy UART 1 access control bit

impl R<u32, Reg<u32, _PPUPATD1>>

pub fn pcnt0(&self) -> PCNT0_R

Bit 0 - Pulse Counter 0 access control bit

pub fn pcnt1(&self) -> PCNT1_R

Bit 1 - Pulse Counter 1 access control bit

pub fn pcnt2(&self) -> PCNT2_R

Bit 2 - Pulse Counter 2 access control bit

pub fn qspi0(&self) -> QSPI0_R

Bit 3 - Quad-SPI access control bit

pub fn rmu(&self) -> RMU_R

Bit 4 - Reset Management Unit access control bit

pub fn rtc(&self) -> RTC_R

Bit 5 - Real-Time Counter access control bit

pub fn rtcc(&self) -> RTCC_R

Bit 6 - Real-Time Counter and Calendar access control bit

pub fn sdio(&self) -> SDIO_R

Bit 7 - SDIO Controller access control bit

pub fn smu(&self) -> SMU_R

Bit 8 - Security Management Unit access control bit

pub fn timer0(&self) -> TIMER0_R

Bit 9 - Timer 0 access control bit

pub fn timer1(&self) -> TIMER1_R

Bit 10 - Timer 1 access control bit

pub fn timer2(&self) -> TIMER2_R

Bit 11 - Timer 2 access control bit

pub fn timer3(&self) -> TIMER3_R

Bit 12 - Timer 3 access control bit

pub fn timer4(&self) -> TIMER4_R

Bit 13 - Timer 4 access control bit

pub fn timer5(&self) -> TIMER5_R

Bit 14 - Timer 5 access control bit

pub fn timer6(&self) -> TIMER6_R

Bit 15 - Timer 6 access control bit

pub fn trng0(&self) -> TRNG0_R

Bit 16 - True Random Number Generator 0 access control bit

pub fn uart0(&self) -> UART0_R

Bit 17 - Universal Asynchronous Receiver/Transmitter 0 access control bit

pub fn uart1(&self) -> UART1_R

Bit 18 - Universal Asynchronous Receiver/Transmitter 1 access control bit

pub fn usart0(&self) -> USART0_R

Bit 19 - Universal Synchronous/Asynchronous Receiver/Transmitter 0 access control bit

pub fn usart1(&self) -> USART1_R

Bit 20 - Universal Synchronous/Asynchronous Receiver/Transmitter 1 access control bit

pub fn usart2(&self) -> USART2_R

Bit 21 - Universal Synchronous/Asynchronous Receiver/Transmitter 2 access control bit

pub fn usart3(&self) -> USART3_R

Bit 22 - Universal Synchronous/Asynchronous Receiver/Transmitter 3 access control bit

pub fn usart4(&self) -> USART4_R

Bit 23 - Universal Synchronous/Asynchronous Receiver/Transmitter 4 access control bit

pub fn usart5(&self) -> USART5_R

Bit 24 - Universal Synchronous/Asynchronous Receiver/Transmitter 5 access control bit

pub fn usb(&self) -> USB_R

Bit 25 - Universal Serial Bus Interface access control bit

pub fn wdog0(&self) -> WDOG0_R

Bit 26 - Watchdog access control bit

pub fn wdog1(&self) -> WDOG1_R

Bit 27 - Watchdog access control bit

pub fn wtimer0(&self) -> WTIMER0_R

Bit 28 - Wide Timer 0 access control bit

pub fn wtimer1(&self) -> WTIMER1_R

Bit 29 - Wide Timer 0 access control bit

pub fn wtimer2(&self) -> WTIMER2_R

Bit 30 - Wide Timer 2 access control bit

pub fn wtimer3(&self) -> WTIMER3_R

Bit 31 - Wide Timer 3 access control bit

impl R<u8, PERIPHID_A>

pub fn variant(&self) -> Variant<u8, PERIPHID_A>

Get enumerated values variant

pub fn is_acmp0(&self) -> bool

Checks if the value of the field is ACMP0

pub fn is_acmp1(&self) -> bool

Checks if the value of the field is ACMP1

pub fn is_acmp2(&self) -> bool

Checks if the value of the field is ACMP2

pub fn is_acmp3(&self) -> bool

Checks if the value of the field is ACMP3

pub fn is_adc0(&self) -> bool

Checks if the value of the field is ADC0

pub fn is_adc1(&self) -> bool

Checks if the value of the field is ADC1

pub fn is_can0(&self) -> bool

Checks if the value of the field is CAN0

pub fn is_can1(&self) -> bool

Checks if the value of the field is CAN1

pub fn is_cmu(&self) -> bool

Checks if the value of the field is CMU

pub fn is_cryotimer(&self) -> bool

Checks if the value of the field is CRYOTIMER

pub fn is_crypto0(&self) -> bool

Checks if the value of the field is CRYPTO0

pub fn is_csen(&self) -> bool

Checks if the value of the field is CSEN

pub fn is_vdac0(&self) -> bool

Checks if the value of the field is VDAC0

pub fn is_prs(&self) -> bool

Checks if the value of the field is PRS

pub fn is_ebi(&self) -> bool

Checks if the value of the field is EBI

pub fn is_emu(&self) -> bool

Checks if the value of the field is EMU

pub fn is_eth(&self) -> bool

Checks if the value of the field is ETH

pub fn is_fpueh(&self) -> bool

Checks if the value of the field is FPUEH

pub fn is_gpcrc(&self) -> bool

Checks if the value of the field is GPCRC

pub fn is_gpio(&self) -> bool

Checks if the value of the field is GPIO

pub fn is_i2c0(&self) -> bool

Checks if the value of the field is I2C0

pub fn is_i2c1(&self) -> bool

Checks if the value of the field is I2C1

pub fn is_i2c2(&self) -> bool

Checks if the value of the field is I2C2

pub fn is_idac0(&self) -> bool

Checks if the value of the field is IDAC0

pub fn is_msc(&self) -> bool

Checks if the value of the field is MSC

pub fn is_lcd(&self) -> bool

Checks if the value of the field is LCD

pub fn is_ldma(&self) -> bool

Checks if the value of the field is LDMA

pub fn is_lesense(&self) -> bool

Checks if the value of the field is LESENSE

pub fn is_letimer0(&self) -> bool

Checks if the value of the field is LETIMER0

pub fn is_letimer1(&self) -> bool

Checks if the value of the field is LETIMER1

pub fn is_leuart0(&self) -> bool

Checks if the value of the field is LEUART0

pub fn is_leuart1(&self) -> bool

Checks if the value of the field is LEUART1

pub fn is_pcnt0(&self) -> bool

Checks if the value of the field is PCNT0

pub fn is_pcnt1(&self) -> bool

Checks if the value of the field is PCNT1

pub fn is_pcnt2(&self) -> bool

Checks if the value of the field is PCNT2

pub fn is_qspi0(&self) -> bool

Checks if the value of the field is QSPI0

pub fn is_rmu(&self) -> bool

Checks if the value of the field is RMU

pub fn is_rtc(&self) -> bool

Checks if the value of the field is RTC

pub fn is_rtcc(&self) -> bool

Checks if the value of the field is RTCC

pub fn is_sdio(&self) -> bool

Checks if the value of the field is SDIO

pub fn is_smu(&self) -> bool

Checks if the value of the field is SMU

pub fn is_timer0(&self) -> bool

Checks if the value of the field is TIMER0

pub fn is_timer1(&self) -> bool

Checks if the value of the field is TIMER1

pub fn is_timer2(&self) -> bool

Checks if the value of the field is TIMER2

pub fn is_timer3(&self) -> bool

Checks if the value of the field is TIMER3

pub fn is_timer4(&self) -> bool

Checks if the value of the field is TIMER4

pub fn is_timer5(&self) -> bool

Checks if the value of the field is TIMER5

pub fn is_timer6(&self) -> bool

Checks if the value of the field is TIMER6

pub fn is_trng0(&self) -> bool

Checks if the value of the field is TRNG0

pub fn is_uart0(&self) -> bool

Checks if the value of the field is UART0

pub fn is_uart1(&self) -> bool

Checks if the value of the field is UART1

pub fn is_usart0(&self) -> bool

Checks if the value of the field is USART0

pub fn is_usart1(&self) -> bool

Checks if the value of the field is USART1

pub fn is_usart2(&self) -> bool

Checks if the value of the field is USART2

pub fn is_usart3(&self) -> bool

Checks if the value of the field is USART3

pub fn is_usart4(&self) -> bool

Checks if the value of the field is USART4

pub fn is_usart5(&self) -> bool

Checks if the value of the field is USART5

pub fn is_usb(&self) -> bool

Checks if the value of the field is USB

pub fn is_wdog0(&self) -> bool

Checks if the value of the field is WDOG0

pub fn is_wdog1(&self) -> bool

Checks if the value of the field is WDOG1

pub fn is_wtimer0(&self) -> bool

Checks if the value of the field is WTIMER0

pub fn is_wtimer1(&self) -> bool

Checks if the value of the field is WTIMER1

pub fn is_wtimer2(&self) -> bool

Checks if the value of the field is WTIMER2

pub fn is_wtimer3(&self) -> bool

Checks if the value of the field is WTIMER3

impl R<u32, Reg<u32, _PPUFS>>

pub fn periphid(&self) -> PERIPHID_R

Bits 0:6

impl R<u32, Reg<u32, _CONTROL>>

pub fn enable(&self) -> ENABLE_R

Bit 0 - TRNG Module Enable

pub fn testen(&self) -> TESTEN_R

Bit 2 - Test Enable

pub fn condbypass(&self) -> CONDBYPASS_R

Bit 3 - Conditioning Bypass

pub fn repcountien(&self) -> REPCOUNTIEN_R

Bit 4 - Interrupt Enable for Repetition Count Test Failure

pub fn apt64ien(&self) -> APT64IEN_R

Bit 5 - Interrupt Enable for Adaptive Proportion Test Failure (64-sample Window)

pub fn apt4096ien(&self) -> APT4096IEN_R

Bit 6 - Interrupt Enable for Adaptive Proportion Test Failure (4096-sample Window)

pub fn fullien(&self) -> FULLIEN_R

Bit 7 - Interrupt Enable for FIFO Full

pub fn softreset(&self) -> SOFTRESET_R

Bit 8 - Software Reset

pub fn preien(&self) -> PREIEN_R

Bit 9 - Interrupt enable for AIS31 preliminary noise alarm

pub fn almien(&self) -> ALMIEN_R

Bit 10 - Interrupt enable for AIS31 noise alarm

pub fn forcerun(&self) -> FORCERUN_R

Bit 11 - Oscillator Force Run

pub fn bypnist(&self) -> BYPNIST_R

Bit 12 - NIST Start-up Test Bypass.

pub fn bypais31(&self) -> BYPAIS31_R

Bit 13 - AIS31 Start-up Test Bypass.

impl R<u32, Reg<u32, _FIFOLEVEL>>

pub fn value(&self) -> VALUE_R

Bits 0:31 - FIFO Level

impl R<u32, Reg<u32, _FIFODEPTH>>

pub fn value(&self) -> VALUE_R

Bits 0:31 - FIFO Depth.

impl R<u32, Reg<u32, _KEY0>>

pub fn value(&self) -> VALUE_R

Bits 0:31 - Key 0

impl R<u32, Reg<u32, _KEY1>>

pub fn value(&self) -> VALUE_R

Bits 0:31 - Key 1

impl R<u32, Reg<u32, _KEY2>>

pub fn value(&self) -> VALUE_R

Bits 0:31 - Key 2

impl R<u32, Reg<u32, _KEY3>>

pub fn value(&self) -> VALUE_R

Bits 0:31 - Key 3

impl R<u32, Reg<u32, _TESTDATA>>

pub fn value(&self) -> VALUE_R

Bits 0:31 - Test data input to conditioning function or to the continuous tests

impl R<u32, Reg<u32, _STATUS>>

pub fn testdatabusy(&self) -> TESTDATABUSY_R

Bit 0 - Test Data Busy

pub fn repcountif(&self) -> REPCOUNTIF_R

Bit 4 - Repetition Count Test Interrupt Status

pub fn apt64if(&self) -> APT64IF_R

Bit 5 - Adaptive Proportion test failure (64-sample window) interrupt status

pub fn apt4096if(&self) -> APT4096IF_R

Bit 6 - Adaptive Proportion test failure (4096-sample window) interrupt status

pub fn fullif(&self) -> FULLIF_R

Bit 7 - FIFO Full Interrupt Status

pub fn preif(&self) -> PREIF_R

Bit 8 - AIS31 Preliminary Noise Alarm interrupt status

pub fn almif(&self) -> ALMIF_R

Bit 9 - AIS31 Noise Alarm interrupt status

impl R<u32, Reg<u32, _INITWAITVAL>>

pub fn value(&self) -> VALUE_R

Bits 0:7 - Wait counter value

impl R<u32, Reg<u32, _FIFO>>

pub fn value(&self) -> VALUE_R

Bits 0:31 - FIFO Read Data

Trait Implementations

impl<U, T, FI> PartialEq<FI> for R<U, T> where
    U: PartialEq,
    FI: Copy + Into<U>, 

fn eq(&self, other: &FI) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=.