Struct stm32f1xx_hal::pac::TIM4

impl TIM4

pub const PTR: const RegisterBlock = {0x40000800 as const stm32f1::stm32f103::tim2::RegisterBlock}

Pointer to the register block

pub const fn ptr() -> *const RegisterBlock

Return the pointer to the register block

Methods from Deref<Target = RegisterBlock>§

pub fn ccr1(&self) -> &Reg<CCR_SPEC>

0x34 - capture/compare register

pub fn ccr2(&self) -> &Reg<CCR_SPEC>

0x38 - capture/compare register

pub fn ccr3(&self) -> &Reg<CCR_SPEC>

0x3c - capture/compare register

pub fn ccr4(&self) -> &Reg<CCR_SPEC>

0x40 - capture/compare register

pub fn ccmr1_input(&self) -> &Reg<CCMR1_INPUT_SPEC>

0x18 - capture/compare mode register 1 (input mode)

pub fn ccmr1_output(&self) -> &Reg<CCMR1_OUTPUT_SPEC>

0x18 - capture/compare mode register 1 (output mode)

pub fn ccmr2_input(&self) -> &Reg<CCMR2_INPUT_SPEC>

0x1c - capture/compare mode register 2 (input mode)

pub fn ccmr2_output(&self) -> &Reg<CCMR2_OUTPUT_SPEC>

0x1c - capture/compare mode register 2 (output mode)

Trait Implementations§

impl Debug for TIM4

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more

impl Deref for TIM4

type Target = RegisterBlock

The resulting type after dereferencing.

fn deref(&self) -> &<TIM4 as Deref>::Target

Dereferences the value.

type Bus = APB1

Bus type;

impl Reset for TIM4

fn reset(rcc: &RegisterBlock)

impl Instance for TIM4

impl Send for TIM4

Auto Trait Implementations§

impl RefUnwindSafe for TIM4

impl !Sync for TIM4

impl Unpin for TIM4

impl UnwindSafe for TIM4

Blanket Implementations§

impl<T> Any for Twhere
T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for Twhere
T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for Twhere
T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into for Twhere
U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<TIM> PwmExt for TIMwhere
TIM: Instance + WithPwm,

fn pwm<REMAP, P, PINS, const FREQ: u32>(
 self,
 pins: PINS,
 mapr: &mut MAPR,
 time: Duration<u32, 1, FREQ>,
 clocks: &Clocks
) -> Pwm<TIM, REMAP, P, PINS, FREQ>where
 REMAP: Remap<Periph = TIM>,
 PINS: Pins<REMAP, P>,

fn pwm_hz<REMAP, P, PINS>(
 self,
 pins: PINS,
 mapr: &mut MAPR,
 time: Rate<u32, 1, 1>,
 clocks: &Clocks
) -> PwmHz<TIM, REMAP, P, PINS>where
 REMAP: Remap<Periph = TIM>,
 PINS: Pins<REMAP, P>,

fn pwm_us<REMAP, P, PINS>(
 self,
 pins: PINS,
 mapr: &mut MAPR,
 time: TimerDurationU32<1_000_000>,
 clocks: &Clocks
) -> Pwm<Self, REMAP, P, PINS, 1_000_000>where
 REMAP: Remap<Periph = Self>,
 PINS: Pins<REMAP, P>,

impl<TIM> TimerExt for TIMwhere
TIM: Instance,

fn counter<const FREQ: u32>(self, clocks: &Clocks) -> Counter<TIM, FREQ>

Non-blocking Counter with custom fixed precision

fn counter_hz(self, clocks: &Clocks) -> CounterHz<TIM>

Non-blocking Counter with dynamic precision which uses Hertz as Duration units

fn delay<const FREQ: u32>(self, clocks: &Clocks) -> Delay<TIM, FREQ>

Blocking Delay with custom fixed precision

fn counter_ms(self, clocks: &Clocks) -> CounterMs<Self>

Non-blocking Counter with fixed precision of 1 ms (1 kHz sampling) Read more

fn counter_us(self, clocks: &Clocks) -> CounterUs<Self>

Non-blocking Counter with fixed precision of 1 μs (1 MHz sampling) Read more

fn delay_ms(self, clocks: &Clocks) -> DelayMs<Self>

Blocking Delay with fixed precision of 1 ms (1 kHz sampling) Read more

fn delay_us(self, clocks: &Clocks) -> DelayUs<Self>

Blocking Delay with fixed precision of 1 μs (1 MHz sampling) Read more

impl<T, U> TryFrom for Twhere
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for Twhere
U: TryFrom<T>,