[−][src]Type Definition lpc55_pac::usart0::intenset::R
type R = R<u32, INTENSET>;
Reader of register INTENSET
Implementations
impl R
[src]
pub fn txidleen(&self) -> TXIDLEEN_R
[src]
Bit 3 - When 1, enables an interrupt when the transmitter becomes idle (TXIDLE = 1).
pub fn deltactsen(&self) -> DELTACTSEN_R
[src]
Bit 5 - When 1, enables an interrupt when there is a change in the state of the CTS input.
pub fn txdisen(&self) -> TXDISEN_R
[src]
Bit 6 - When 1, enables an interrupt when the transmitter is fully disabled as indicated by the TXDISINT flag in STAT. See description of the TXDISINT bit for details.
pub fn deltarxbrken(&self) -> DELTARXBRKEN_R
[src]
Bit 11 - When 1, enables an interrupt when a change of state has occurred in the detection of a received break condition (break condition asserted or deasserted).
pub fn starten(&self) -> STARTEN_R
[src]
Bit 12 - When 1, enables an interrupt when a received start bit has been detected.
pub fn framerren(&self) -> FRAMERREN_R
[src]
Bit 13 - When 1, enables an interrupt when a framing error has been detected.
pub fn parityerren(&self) -> PARITYERREN_R
[src]
Bit 14 - When 1, enables an interrupt when a parity error has been detected.
pub fn rxnoiseen(&self) -> RXNOISEEN_R
[src]
Bit 15 - When 1, enables an interrupt when noise is detected. See description of the RXNOISEINT bit in Table 354.
pub fn aberren(&self) -> ABERREN_R
[src]
Bit 16 - When 1, enables an interrupt when an auto baud error occurs.