Struct geo::geometry::Rect

pub struct Rect<T = f64>
where
    T: CoordNum,
{ /* private fields */ }

An axis-aligned bounded 2D rectangle whose area is defined by minimum and maximum Coords.

The constructors and setters ensure the maximum Coord is greater than or equal to the minimum. Thus, a Rects width, height, and area is guaranteed to be greater than or equal to zero.

Note. While Rect implements MapCoords and RotatePoint algorithmic traits, the usage is expected to maintain the axis alignment. In particular, only rotation by integer multiples of 90 degrees, will preserve the original shape. In other cases, the min, and max points are rotated or transformed, and a new rectangle is created (with coordinate swaps to ensure min < max).

Examples

use geo_types::{coord, Rect};

let rect = Rect::new(
    coord! { x: 0., y: 4.},
    coord! { x: 3., y: 10.},
);

assert_eq!(3., rect.width());
assert_eq!(6., rect.height());
assert_eq!(
    coord! { x: 1.5, y: 7. },
    rect.center()
);

Implementations

impl<T> Rect<T>

where T: CoordNum,

pub fn new<C>(c1: C, c2: C) -> Rect<T>

where C: Into<Coord<T>>,

Creates a new rectangle from two corner coordinates.

Examples

use geo_types::{coord, Rect};

let rect = Rect::new(
    coord! { x: 10., y: 20. },
    coord! { x: 30., y: 10. }
);
assert_eq!(rect.min(), coord! { x: 10., y: 10. });
assert_eq!(rect.max(), coord! { x: 30., y: 20. });

pub fn try_new<C>(c1: C, c2: C) -> Result<Rect<T>, InvalidRectCoordinatesError>

where C: Into<Coord<T>>,

👎Deprecated since 0.6.2: Use Rect::new instead, since Rect::try_new will never Error

pub fn min(self) -> Coord<T>

Returns the minimum Coord of the Rect.

Examples

use geo_types::{coord, Rect};

let rect = Rect::new(
    coord! { x: 5., y: 5. },
    coord! { x: 15., y: 15. },
);

assert_eq!(rect.min(), coord! { x: 5., y: 5. });

pub fn set_min<C>(&mut self, min: C)

where C: Into<Coord<T>>,

Set the Rect’s minimum coordinate.

Panics

Panics if min’s x/y is greater than the maximum coordinate’s x/y.

pub fn max(self) -> Coord<T>

Returns the maximum Coord of the Rect.

Examples

use geo_types::{coord, Rect};

let rect = Rect::new(
    coord! { x: 5., y: 5. },
    coord! { x: 15., y: 15. },
);

assert_eq!(rect.max(), coord! { x: 15., y: 15. });

pub fn set_max<C>(&mut self, max: C)

where C: Into<Coord<T>>,

Set the Rect’s maximum coordinate.

Panics

Panics if max’s x/y is less than the minimum coordinate’s x/y.

pub fn width(self) -> T

Returns the width of the Rect.

Examples

use geo_types::{coord, Rect};

let rect = Rect::new(
    coord! { x: 5., y: 5. },
    coord! { x: 15., y: 15. },
);

assert_eq!(rect.width(), 10.);

pub fn height(self) -> T

Returns the height of the Rect.

Examples

use geo_types::{coord, Rect};

let rect = Rect::new(
    coord! { x: 5., y: 5. },
    coord! { x: 15., y: 15. },
);

assert_eq!(rect.height(), 10.);

pub fn to_polygon(self) -> Polygon<T>

Create a Polygon from the Rect.

Examples

use geo_types::{coord, Rect, polygon};

let rect = Rect::new(
    coord! { x: 0., y: 0. },
    coord! { x: 1., y: 2. },
);

assert_eq!(
    rect.to_polygon(),
    polygon![
        (x: 0., y: 0.),
        (x: 0., y: 2.),
        (x: 1., y: 2.),
        (x: 1., y: 0.),
        (x: 0., y: 0.),
    ],
);

pub fn to_lines(&self) -> [Line<T>; 4]

pub fn split_x(self) -> [Rect<T>; 2]

Split a rectangle into two rectangles along the X-axis with equal widths.

Examples

let rect = geo_types::Rect::new(
    geo_types::coord! { x: 0., y: 0. },
    geo_types::coord! { x: 4., y: 4. },
);

let [rect1, rect2] = rect.split_x();

assert_eq!(
    geo_types::Rect::new(
        geo_types::coord! { x: 0., y: 0. },
        geo_types::coord! { x: 2., y: 4. },
    ),
    rect1,
);
assert_eq!(
    geo_types::Rect::new(
        geo_types::coord! { x: 2., y: 0. },
        geo_types::coord! { x: 4., y: 4. },
    ),
    rect2,
);

pub fn split_y(self) -> [Rect<T>; 2]

Split a rectangle into two rectangles along the Y-axis with equal heights.

Examples

let rect = geo_types::Rect::new(
    geo_types::coord! { x: 0., y: 0. },
    geo_types::coord! { x: 4., y: 4. },
);

let [rect1, rect2] = rect.split_y();

assert_eq!(
    geo_types::Rect::new(
        geo_types::coord! { x: 0., y: 0. },
        geo_types::coord! { x: 4., y: 2. },
    ),
    rect1,
);
assert_eq!(
    geo_types::Rect::new(
        geo_types::coord! { x: 0., y: 2. },
        geo_types::coord! { x: 4., y: 4. },
    ),
    rect2,
);

impl<T> Rect<T>

where T: CoordFloat,

pub fn center(self) -> Coord<T>

Returns the center Coord of the Rect.

Examples

use geo_types::{coord, Rect};

let rect = Rect::new(
    coord! { x: 5., y: 5. },
    coord! { x: 15., y: 15. },
);

assert_eq!(rect.center(), coord! { x: 10., y: 10. });

Trait Implementations

impl<T> AbsDiffEq for Rect<T>

where T: AbsDiffEq<Epsilon = T> + CoordNum, <T as AbsDiffEq>::Epsilon: Copy,

fn abs_diff_eq( &self, other: &Rect<T>, epsilon: <Rect<T> as AbsDiffEq>::Epsilon ) -> bool

Equality assertion with an absolute limit.

Examples

use geo_types::{point, Rect};

let a = Rect::new((0.0, 0.0), (10.0, 10.0));
let b = Rect::new((0.0, 0.0), (10.01, 10.0));

approx::abs_diff_eq!(a, b, epsilon=0.1);
approx::abs_diff_ne!(a, b, epsilon=0.001);

type Epsilon = T

Used for specifying relative comparisons.

fn default_epsilon() -> <Rect<T> as AbsDiffEq>::Epsilon

The default tolerance to use when testing values that are close together.

fn abs_diff_ne(&self, other: &Rhs, epsilon: Self::Epsilon) -> bool

The inverse of [AbsDiffEq::abs_diff_eq].

impl<T> Area<T> for Rect<T>

where T: CoordNum,

Because a Rect has no winding order, the area will always be positive.

fn signed_area(&self) -> T

fn unsigned_area(&self) -> T

impl<T> BoundingRect<T> for Rect<T>

where T: CoordNum,

type Output = Rect<T>

fn bounding_rect(&self) -> Self::Output

Return the bounding rectangle of a geometry

impl<T> Centroid for Rect<T>

where T: GeoFloat,

fn centroid(&self) -> Self::Output

The Centroid of a Rect is the mean of its Points

Examples

use geo::Centroid;
use geo::{Rect, point};

let rect = Rect::new(
  point!(x: 0.0f32, y: 0.0),
  point!(x: 1.0, y: 1.0),
);

assert_eq!(
    point!(x: 0.5, y: 0.5),
    rect.centroid(),
);

type Output = Point<T>

impl<T> ChamberlainDuquetteArea<T> for Rect<T>

where T: CoordFloat,

fn chamberlain_duquette_signed_area(&self) -> T

fn chamberlain_duquette_unsigned_area(&self) -> T

impl<T> Clone for Rect<T>

where T: Clone + CoordNum,

fn clone(&self) -> Rect<T>

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl<F: GeoFloat> ClosestPoint<F> for Rect<F>

fn closest_point(&self, p: &Point<F>) -> Closest<F>

Find the closest point between self and p.

impl<T> Contains<Coord<T>> for Rect<T>

where T: CoordNum,

fn contains(&self, coord: &Coord<T>) -> bool

impl<T> Contains<Geometry<T>> for Rect<T>

where T: GeoFloat,

fn contains(&self, geometry: &Geometry<T>) -> bool

impl<T> Contains<GeometryCollection<T>> for Rect<T>

where T: GeoFloat,

fn contains(&self, target: &GeometryCollection<T>) -> bool

impl<T> Contains<Line<T>> for Rect<T>

where T: GeoFloat,

fn contains(&self, target: &Line<T>) -> bool

impl<T> Contains<LineString<T>> for Rect<T>

where T: GeoFloat,

fn contains(&self, target: &LineString<T>) -> bool

impl<T> Contains<MultiLineString<T>> for Rect<T>

where T: GeoFloat,

fn contains(&self, target: &MultiLineString<T>) -> bool

impl<T> Contains<MultiPoint<T>> for Rect<T>

where T: GeoFloat,

fn contains(&self, target: &MultiPoint<T>) -> bool

impl<T> Contains<MultiPolygon<T>> for Rect<T>

where T: GeoFloat,

fn contains(&self, target: &MultiPolygon<T>) -> bool

impl<T> Contains<Point<T>> for Rect<T>

where T: CoordNum,

fn contains(&self, p: &Point<T>) -> bool

impl<T> Contains<Polygon<T>> for Rect<T>

where T: GeoFloat,

fn contains(&self, target: &Polygon<T>) -> bool

impl<F> Contains<Rect<F>> for MultiPolygon<F>

where F: GeoFloat,

fn contains(&self, rhs: &Rect<F>) -> bool

impl<T> Contains<Rect<T>> for Geometry<T>

where T: GeoFloat,

fn contains(&self, rect: &Rect<T>) -> bool

impl<T> Contains<Rect<T>> for GeometryCollection<T>

where T: GeoFloat,

fn contains(&self, target: &Rect<T>) -> bool

impl<T> Contains<Rect<T>> for Line<T>

where T: GeoFloat,

fn contains(&self, target: &Rect<T>) -> bool

impl<T> Contains<Rect<T>> for LineString<T>

where T: GeoFloat,

fn contains(&self, target: &Rect<T>) -> bool

impl<T> Contains<Rect<T>> for MultiLineString<T>

where T: GeoFloat,

fn contains(&self, target: &Rect<T>) -> bool

impl<T> Contains<Rect<T>> for MultiPoint<T>

where T: GeoFloat,

fn contains(&self, target: &Rect<T>) -> bool

impl<T> Contains<Rect<T>> for Point<T>

where T: CoordNum,

fn contains(&self, rect: &Rect<T>) -> bool

impl<T> Contains<Rect<T>> for Polygon<T>

where T: GeoFloat,

fn contains(&self, target: &Rect<T>) -> bool

impl<T> Contains<Rect<T>> for Triangle<T>

where T: GeoFloat,

fn contains(&self, target: &Rect<T>) -> bool

impl<T> Contains<Triangle<T>> for Rect<T>

where T: GeoFloat,

fn contains(&self, target: &Triangle<T>) -> bool

impl<T> Contains for Rect<T>

where T: CoordNum,

fn contains(&self, other: &Rect<T>) -> bool

impl<T> CoordinatePosition for Rect<T>

where T: GeoNum,

type Scalar = T

fn calculate_coordinate_position( &self, coord: &Coord<T>, is_inside: &mut bool, boundary_count: &mut usize )

fn coordinate_position(&self, coord: &Coord<Self::Scalar>) -> CoordPos

impl<T: CoordNum> CoordsIter for Rect<T>

fn coords_count(&self) -> usize

Return the number of coordinates in the Rect.

Note: Although a Rect is represented by two coordinates, it is spatially represented by four, so this method returns 4.

type Iter<'a> = Chain<Chain<Chain<Once<Coord<T>>, Once<Coord<T>>>, Once<Coord<T>>>, Once<Coord<T>>> where T: 'a

type ExteriorIter<'a> = <Rect<T> as CoordsIter>::Iter<'a> where T: 'a

type Scalar = T

fn coords_iter(&self) -> Self::Iter<'_>

Iterate over all exterior and (if any) interior coordinates of a geometry.

fn exterior_coords_iter(&self) -> Self::ExteriorIter<'_>

Iterate over all exterior coordinates of a geometry.

impl<T> Debug for Rect<T>

where T: Debug + CoordNum,

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl<T> Densify<T> for Rect<T>

where T: CoordFloat, Line<T>: EuclideanLength<T>, LineString<T>: EuclideanLength<T>,

type Output = Polygon<T>

fn densify(&self, max_distance: T) -> Self::Output

impl<T> DensifyHaversine<T> for Rect<T>

where T: CoordFloat + FromPrimitive, Line<T>: HaversineLength<T>, LineString<T>: HaversineLength<T>,

type Output = Polygon<T>

fn densify_haversine(&self, max_distance: T) -> Self::Output

impl<T> EuclideanDistance<T> for Rect<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &Rect<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, Geometry<T>> for Rect<T>

where T: GeoFloat + FloatConst + RTreeNum,

fn euclidean_distance(&self, geom: &Geometry<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, GeometryCollection<T>> for Rect<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &GeometryCollection<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, Line<T>> for Rect<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &Line<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, LineString<T>> for Rect<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &LineString<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, MultiLineString<T>> for Rect<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &MultiLineString<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, MultiPoint<T>> for Rect<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &MultiPoint<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, MultiPolygon<T>> for Rect<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &MultiPolygon<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, Point<T>> for Rect<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &Point<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, Polygon<T>> for Rect<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &Polygon<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, Rect<T>> for Geometry<T>

where T: GeoFloat + FloatConst + RTreeNum,

fn euclidean_distance(&self, other: &Rect<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, Rect<T>> for GeometryCollection<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &Rect<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, Rect<T>> for Line<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &Rect<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, Rect<T>> for LineString<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &Rect<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, Rect<T>> for MultiLineString<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &Rect<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, Rect<T>> for MultiPoint<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &Rect<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, Rect<T>> for MultiPolygon<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &Rect<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, Rect<T>> for Point<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &Rect<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, Rect<T>> for Polygon<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &Rect<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, Rect<T>> for Triangle<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &Rect<T>) -> T

Returns the distance between two geometries

impl<T> EuclideanDistance<T, Triangle<T>> for Rect<T>

where T: GeoFloat + Signed + RTreeNum + FloatConst,

fn euclidean_distance(&self, other: &Triangle<T>) -> T

Returns the distance between two geometries

impl<T> From<Rect<T>> for Geometry<T>

where T: CoordNum,

fn from(x: Rect<T>) -> Geometry<T>

Converts to this type from the input type.

impl<T> From<Rect<T>> for Polygon<T>

where T: CoordNum,

fn from(r: Rect<T>) -> Polygon<T>

Converts to this type from the input type.

impl GeodesicArea<f64> for Rect

fn geodesic_perimeter(&self) -> f64

Determine the perimeter of a geometry on an ellipsoidal model of the earth.

fn geodesic_area_signed(&self) -> f64

Determine the area of a geometry on an ellipsoidal model of the earth.

fn geodesic_area_unsigned(&self) -> f64

Determine the area of a geometry on an ellipsoidal model of the earth. Supports very large geometries that cover a significant portion of the earth.

fn geodesic_perimeter_area_signed(&self) -> (f64, f64)

Determine the perimeter and area of a geometry on an ellipsoidal model of the earth, all in one operation.

fn geodesic_perimeter_area_unsigned(&self) -> (f64, f64)

Determine the perimeter and area of a geometry on an ellipsoidal model of the earth, all in one operation. Supports very large geometries that cover a significant portion of the earth.

impl<C: CoordNum> HasDimensions for Rect<C>

fn is_empty(&self) -> bool

Some geometries, like a MultiPoint, can have zero coordinates - we call these empty.

fn dimensions(&self) -> Dimensions

The dimensions of some geometries are fixed, e.g. a Point always has 0 dimensions. However for others, the dimensionality depends on the specific geometry instance - for example typical Rects are 2-dimensional, but it’s possible to create degenerate Rects which have either 1 or 0 dimensions.

fn boundary_dimensions(&self) -> Dimensions

The dimensions of the Geometry’s boundary, as used by OGC-SFA.

impl<T> Hash for Rect<T>

where T: Hash + CoordNum,

fn hash<__H>(&self, state: &mut __H)

where __H: Hasher,

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl<T> HaversineClosestPoint<T> for Rect<T>

where T: GeoFloat + FromPrimitive,

fn haversine_closest_point(&self, from: &Point<T>) -> Closest<T>

impl<T> InteriorPoint for Rect<T>

where T: GeoFloat,

type Output = Point<T>

fn interior_point(&self) -> Self::Output

Calculates a representative point inside the Geometry

impl<T> Intersects<Coord<T>> for Rect<T>

where T: CoordNum,

fn intersects(&self, rhs: &Coord<T>) -> bool

impl<T> Intersects<Geometry<T>> for Rect<T>

where Geometry<T>: Intersects<Rect<T>>, T: CoordNum,

fn intersects(&self, rhs: &Geometry<T>) -> bool

impl<T> Intersects<GeometryCollection<T>> for Rect<T>

where GeometryCollection<T>: Intersects<Rect<T>>, T: CoordNum,

fn intersects(&self, rhs: &GeometryCollection<T>) -> bool

impl<T> Intersects<Line<T>> for Rect<T>

where T: GeoNum,

fn intersects(&self, rhs: &Line<T>) -> bool

impl<T> Intersects<LineString<T>> for Rect<T>

where LineString<T>: Intersects<Rect<T>>, T: CoordNum,

fn intersects(&self, rhs: &LineString<T>) -> bool

impl<T> Intersects<MultiLineString<T>> for Rect<T>

where MultiLineString<T>: Intersects<Rect<T>>, T: CoordNum,

fn intersects(&self, rhs: &MultiLineString<T>) -> bool

impl<T> Intersects<MultiPoint<T>> for Rect<T>

where MultiPoint<T>: Intersects<Rect<T>>, T: CoordNum,

fn intersects(&self, rhs: &MultiPoint<T>) -> bool

impl<T> Intersects<MultiPolygon<T>> for Rect<T>

where MultiPolygon<T>: Intersects<Rect<T>>, T: CoordNum,

fn intersects(&self, rhs: &MultiPolygon<T>) -> bool

impl<T> Intersects<Point<T>> for Rect<T>

where Point<T>: Intersects<Rect<T>>, T: CoordNum,

fn intersects(&self, rhs: &Point<T>) -> bool

impl<T> Intersects<Polygon<T>> for Rect<T>

where Polygon<T>: Intersects<Rect<T>>, T: CoordNum,

fn intersects(&self, rhs: &Polygon<T>) -> bool

impl<T> Intersects<Rect<T>> for Coord<T>

where Rect<T>: Intersects<Coord<T>>, T: CoordNum,

fn intersects(&self, rhs: &Rect<T>) -> bool

impl<T> Intersects<Rect<T>> for Line<T>

where Rect<T>: Intersects<Line<T>>, T: CoordNum,

fn intersects(&self, rhs: &Rect<T>) -> bool

impl<T> Intersects<Rect<T>> for Polygon<T>

where T: GeoNum,

fn intersects(&self, rect: &Rect<T>) -> bool

impl<T> Intersects<Rect<T>> for Triangle<T>

where Rect<T>: Intersects<Triangle<T>>, T: CoordNum,

fn intersects(&self, rhs: &Rect<T>) -> bool

impl<T> Intersects<Triangle<T>> for Rect<T>

where T: GeoNum,

fn intersects(&self, rhs: &Triangle<T>) -> bool

impl<T> Intersects for Rect<T>

where T: CoordNum,

fn intersects(&self, other: &Rect<T>) -> bool

impl<'a, T: CoordNum + 'a> LinesIter<'a> for Rect<T>

type Scalar = T

type Iter = <[Line<<Rect<T> as LinesIter<'a>>::Scalar>; 4] as IntoIterator>::IntoIter

fn lines_iter(&'a self) -> Self::Iter

Iterate over all exterior and (if any) interior lines of a geometry.

impl<T: CoordNum, NT: CoordNum> MapCoords<T, NT> for Rect<T>

type Output = Rect<NT>

fn map_coords( &self, func: impl Fn(Coord<T>) -> Coord<NT> + Copy ) -> Self::Output

Apply a function to all the coordinates in a geometric object, returning a new object.

fn try_map_coords<E>( &self, func: impl Fn(Coord<T>) -> Result<Coord<NT>, E> ) -> Result<Self::Output, E>

Map a fallible function over all the coordinates in a geometry, returning a Result

impl<T: CoordNum> MapCoordsInPlace<T> for Rect<T>

fn map_coords_in_place(&mut self, func: impl Fn(Coord<T>) -> Coord<T>)

Apply a function to all the coordinates in a geometric object, in place

fn try_map_coords_in_place<E>( &mut self, func: impl Fn(Coord<T>) -> Result<Coord<T>, E> ) -> Result<(), E>

Map a fallible function over all the coordinates in a geometry, in place, returning a Result.

impl<T> PartialEq for Rect<T>

where T: PartialEq + CoordNum,

fn eq(&self, other: &Rect<T>) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl<F: GeoFloat> Relate<F, GeometryCollection<F>> for Rect<F>

fn relate(&self, other: &GeometryCollection<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, Line<F>> for Rect<F>

fn relate(&self, other: &Line<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, LineString<F>> for Rect<F>

fn relate(&self, other: &LineString<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, MultiLineString<F>> for Rect<F>

fn relate(&self, other: &MultiLineString<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, MultiPoint<F>> for Rect<F>

fn relate(&self, other: &MultiPoint<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, MultiPolygon<F>> for Rect<F>

fn relate(&self, other: &MultiPolygon<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, Point<F>> for Rect<F>

fn relate(&self, other: &Point<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, Polygon<F>> for Rect<F>

fn relate(&self, other: &Polygon<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, Rect<F>> for GeometryCollection<F>

fn relate(&self, other: &Rect<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, Rect<F>> for Line<F>

fn relate(&self, other: &Rect<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, Rect<F>> for LineString<F>

fn relate(&self, other: &Rect<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, Rect<F>> for MultiLineString<F>

fn relate(&self, other: &Rect<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, Rect<F>> for MultiPoint<F>

fn relate(&self, other: &Rect<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, Rect<F>> for MultiPolygon<F>

fn relate(&self, other: &Rect<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, Rect<F>> for Point<F>

fn relate(&self, other: &Rect<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, Rect<F>> for Polygon<F>

fn relate(&self, other: &Rect<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, Rect<F>> for Rect<F>

fn relate(&self, other: &Rect<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, Rect<F>> for Triangle<F>

fn relate(&self, other: &Rect<F>) -> IntersectionMatrix

impl<F: GeoFloat> Relate<F, Triangle<F>> for Rect<F>

fn relate(&self, other: &Triangle<F>) -> IntersectionMatrix

impl<T> RelativeEq for Rect<T>

where T: AbsDiffEq<Epsilon = T> + CoordNum + RelativeEq,

fn relative_eq( &self, other: &Rect<T>, epsilon: <Rect<T> as AbsDiffEq>::Epsilon, max_relative: <Rect<T> as AbsDiffEq>::Epsilon ) -> bool

Equality assertion within a relative limit.

Examples

use geo_types::Rect;

let a = Rect::new((0.0, 0.0), (10.0, 10.0));
let b = Rect::new((0.0, 0.0), (10.01, 10.0));

approx::assert_relative_eq!(a, b, max_relative=0.1);
approx::assert_relative_ne!(a, b, max_relative=0.0001);

fn default_max_relative() -> <Rect<T> as AbsDiffEq>::Epsilon

The default relative tolerance for testing values that are far-apart.

fn relative_ne( &self, other: &Rhs, epsilon: Self::Epsilon, max_relative: Self::Epsilon ) -> bool

The inverse of [RelativeEq::relative_eq].

impl<T> RemoveRepeatedPoints<T> for Rect<T>

where T: CoordNum + FromPrimitive,

fn remove_repeated_points(&self) -> Self

Create a new geometry with (consecutive) repeated points removed.

fn remove_repeated_points_mut(&mut self)

Remove (consecutive) repeated points inplace.

impl<T> TryFrom<Geometry<T>> for Rect<T>

where T: CoordNum,

Convert a Geometry enum into its inner type.

Fails if the enum case does not match the type you are trying to convert it to.

type Error = Error

The type returned in the event of a conversion error.

fn try_from( geom: Geometry<T> ) -> Result<Rect<T>, <Rect<T> as TryFrom<Geometry<T>>>::Error>

Performs the conversion.

impl<T> Copy for Rect<T>

where T: Copy + CoordNum,

impl<T> Eq for Rect<T>

where T: Eq + CoordNum,

impl<T> StructuralPartialEq for Rect<T>

where T: CoordNum,