rp-pac 7.0.0

Peripheral Access Crate (PAC) for Raspberry Pi Silicon chips.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68

#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Rosc {
    ptr: *mut u8,
}
unsafe impl Send for Rosc {}
unsafe impl Sync for Rosc {}
impl Rosc {
    #[inline(always)]
    pub const unsafe fn from_ptr(ptr: *mut ()) -> Self {
        Self { ptr: ptr as _ }
    }
    #[inline(always)]
    pub const fn as_ptr(&self) -> *mut () {
        self.ptr as _
    }
    #[doc = "Ring Oscillator control"]
    #[inline(always)]
    pub const fn ctrl(self) -> crate::common::Reg<regs::Ctrl, crate::common::RW> {
        unsafe { crate::common::Reg::from_ptr(self.ptr.add(0x0usize) as _) }
    }
    #[doc = "The FREQA & FREQB registers control the frequency by controlling the drive strength of each stage The drive strength has 4 levels determined by the number of bits set Increasing the number of bits set increases the drive strength and increases the oscillation frequency 0 bits set is the default drive strength 1 bit set doubles the drive strength 2 bits set triples drive strength 3 bits set quadruples drive strength For frequency randomisation set both DS0_RANDOM=1 & DS1_RANDOM=1"]
    #[inline(always)]
    pub const fn freqa(self) -> crate::common::Reg<regs::Freqa, crate::common::RW> {
        unsafe { crate::common::Reg::from_ptr(self.ptr.add(0x04usize) as _) }
    }
    #[doc = "For a detailed description see freqa register"]
    #[inline(always)]
    pub const fn freqb(self) -> crate::common::Reg<regs::Freqb, crate::common::RW> {
        unsafe { crate::common::Reg::from_ptr(self.ptr.add(0x08usize) as _) }
    }
    #[doc = "Loads a value to the LFSR randomiser"]
    #[inline(always)]
    pub const fn random(self) -> crate::common::Reg<u32, crate::common::RW> {
        unsafe { crate::common::Reg::from_ptr(self.ptr.add(0x0cusize) as _) }
    }
    #[doc = "Ring Oscillator pause control"]
    #[inline(always)]
    pub const fn dormant(self) -> crate::common::Reg<regs::Dormant, crate::common::RW> {
        unsafe { crate::common::Reg::from_ptr(self.ptr.add(0x10usize) as _) }
    }
    #[doc = "Controls the output divider"]
    #[inline(always)]
    pub const fn div(self) -> crate::common::Reg<regs::Div, crate::common::RW> {
        unsafe { crate::common::Reg::from_ptr(self.ptr.add(0x14usize) as _) }
    }
    #[doc = "Controls the phase shifted output"]
    #[inline(always)]
    pub const fn phase(self) -> crate::common::Reg<regs::Phase, crate::common::RW> {
        unsafe { crate::common::Reg::from_ptr(self.ptr.add(0x18usize) as _) }
    }
    #[doc = "Ring Oscillator Status"]
    #[inline(always)]
    pub const fn status(self) -> crate::common::Reg<regs::Status, crate::common::RW> {
        unsafe { crate::common::Reg::from_ptr(self.ptr.add(0x1cusize) as _) }
    }
    #[doc = "This just reads the state of the oscillator output so randomness is compromised if the ring oscillator is stopped or run at a harmonic of the bus frequency"]
    #[inline(always)]
    pub const fn randombit(self) -> crate::common::Reg<regs::Randombit, crate::common::RW> {
        unsafe { crate::common::Reg::from_ptr(self.ptr.add(0x20usize) as _) }
    }
    #[doc = "A down counter running at the ROSC frequency which counts to zero and stops. To start the counter write a non-zero value. Can be used for short software pauses when setting up time sensitive hardware."]
    #[inline(always)]
    pub const fn count(self) -> crate::common::Reg<regs::Count, crate::common::RW> {
        unsafe { crate::common::Reg::from_ptr(self.ptr.add(0x24usize) as _) }
    }
}
pub mod regs;
pub mod vals;