ra6t2-pac 0.2.0

/*
DISCLAIMER
This software is supplied by Renesas Electronics Corporation and is only intended for use with Renesas products.
No other uses are authorized. This software is owned by Renesas Electronics Corporation and is protected under all
applicable laws, including copyright laws.
THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING THIS SOFTWARE, WHETHER EXPRESS, IMPLIED
OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT.  ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY
LAW, NEITHER RENESAS ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR
ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Renesas reserves the right, without notice, to make changes to this software and to discontinue the availability
of this software. By using this software, you agree to the additional terms and conditions found by accessing the
following link:
http://www.renesas.com/disclaimer

*/
// Generated from SVD 1.40.00, with svd2pac 0.6.0 on Thu, 24 Jul 2025 04:52:39 +0000

#![allow(clippy::identity_op)]
#![allow(clippy::module_inception)]
#![allow(clippy::derivable_impls)]
#[allow(unused_imports)]
use crate::common::sealed;
#[allow(unused_imports)]
use crate::common::*;
#[doc = r"12-bit D/A converter 0"]
unsafe impl ::core::marker::Send for super::Dac120 {}
unsafe impl ::core::marker::Sync for super::Dac120 {}
impl super::Dac120 {
    #[allow(unused)]
    #[inline(always)]
    pub(crate) const fn _svd2pac_as_ptr(&self) -> *mut u8 {
        self.ptr
    }

    #[doc = "D/A Data Register %s"]
    #[inline(always)]
    pub const fn dadr(
        &self,
    ) -> &'static crate::common::ClusterRegisterArray<
        crate::common::Reg<self::Dadr_SPEC, crate::common::RW>,
        2,
        0x2,
    > {
        unsafe {
            crate::common::ClusterRegisterArray::from_ptr(self._svd2pac_as_ptr().add(0x0usize))
        }
    }
    #[inline(always)]
    pub const fn dadr0(&self) -> &'static crate::common::Reg<self::Dadr_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Dadr_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x0usize),
            )
        }
    }
    #[inline(always)]
    pub const fn dadr1(&self) -> &'static crate::common::Reg<self::Dadr_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Dadr_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x2usize),
            )
        }
    }

    #[doc = "D/A Control Register"]
    #[inline(always)]
    pub const fn dacr(&self) -> &'static crate::common::Reg<self::Dacr_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Dacr_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(4usize),
            )
        }
    }

    #[doc = "DADRn Format Select Register"]
    #[inline(always)]
    pub const fn dadpr(&self) -> &'static crate::common::Reg<self::Dadpr_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Dadpr_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(5usize),
            )
        }
    }

    #[doc = "D/A Output Amplifier Control Register"]
    #[inline(always)]
    pub const fn daampcr(
        &self,
    ) -> &'static crate::common::Reg<self::Daampcr_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Daampcr_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(8usize),
            )
        }
    }

    #[doc = "D/A Amplifier Stabilization Wait Control Register"]
    #[inline(always)]
    pub const fn daaswcr(
        &self,
    ) -> &'static crate::common::Reg<self::Daaswcr_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Daaswcr_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(28usize),
            )
        }
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Dadr_SPEC;
impl crate::sealed::RegSpec for Dadr_SPEC {
    type DataType = u16;
}

#[doc = "D/A Data Register %s"]
pub type Dadr = crate::RegValueT<Dadr_SPEC>;

impl NoBitfieldReg<Dadr_SPEC> for Dadr {}
impl ::core::default::Default for Dadr {
    #[inline(always)]
    fn default() -> Dadr {
        <crate::RegValueT<Dadr_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Dacr_SPEC;
impl crate::sealed::RegSpec for Dacr_SPEC {
    type DataType = u8;
}

#[doc = "D/A Control Register"]
pub type Dacr = crate::RegValueT<Dacr_SPEC>;

impl Dacr {
    #[doc = "D/A Enable"]
    #[inline(always)]
    pub fn dae(
        self,
    ) -> crate::common::RegisterField<
        5,
        0x1,
        1,
        0,
        dacr::Dae,
        dacr::Dae,
        Dacr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            5,
            0x1,
            1,
            0,
            dacr::Dae,
            dacr::Dae,
            Dacr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "D/A Output Enable 0"]
    #[inline(always)]
    pub fn daoe0(
        self,
    ) -> crate::common::RegisterField<
        6,
        0x1,
        1,
        0,
        dacr::Daoe0,
        dacr::Daoe0,
        Dacr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            6,
            0x1,
            1,
            0,
            dacr::Daoe0,
            dacr::Daoe0,
            Dacr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "D/A Output Enable 1"]
    #[inline(always)]
    pub fn daoe1(
        self,
    ) -> crate::common::RegisterField<
        7,
        0x1,
        1,
        0,
        dacr::Daoe1,
        dacr::Daoe1,
        Dacr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            7,
            0x1,
            1,
            0,
            dacr::Daoe1,
            dacr::Daoe1,
            Dacr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Dacr {
    #[inline(always)]
    fn default() -> Dacr {
        <crate::RegValueT<Dacr_SPEC> as RegisterValue<_>>::new(31)
    }
}
pub mod dacr {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dae_SPEC;
    pub type Dae = crate::EnumBitfieldStruct<u8, Dae_SPEC>;
    impl Dae {
        #[doc = "Control D/A conversion of channels 0 and 1 individually Control D/A conversion of channels 2 and 3 individually"]
        pub const _0: Self = Self::new(0);

        #[doc = "Control D/A conversion of channels 0 and 1 collectively Control D/A conversion of channels 2 and 3 collectively"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Daoe0_SPEC;
    pub type Daoe0 = crate::EnumBitfieldStruct<u8, Daoe0_SPEC>;
    impl Daoe0 {
        #[doc = "Disable analog output of channel 0 (DA0) Disable analog output of channel 2 (DA2)"]
        pub const _0: Self = Self::new(0);

        #[doc = "Enable D/A conversion of channel 0 (DA0) Enable D/A conversion of channel 2 (DA2)"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Daoe1_SPEC;
    pub type Daoe1 = crate::EnumBitfieldStruct<u8, Daoe1_SPEC>;
    impl Daoe1 {
        #[doc = "Disable analog output of channel 1 (DA1) Disable analog output of channel 3 (DA3)"]
        pub const _0: Self = Self::new(0);

        #[doc = "Enable D/A conversion of channel 1 (DA1) Enable D/A conversion of channel 3 (DA3)"]
        pub const _1: Self = Self::new(1);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Dadpr_SPEC;
impl crate::sealed::RegSpec for Dadpr_SPEC {
    type DataType = u8;
}

#[doc = "DADRn Format Select Register"]
pub type Dadpr = crate::RegValueT<Dadpr_SPEC>;

impl Dadpr {
    #[doc = "DADRn Format Select"]
    #[inline(always)]
    pub fn dpsel(
        self,
    ) -> crate::common::RegisterField<
        7,
        0x1,
        1,
        0,
        dadpr::Dpsel,
        dadpr::Dpsel,
        Dadpr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            7,
            0x1,
            1,
            0,
            dadpr::Dpsel,
            dadpr::Dpsel,
            Dadpr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Dadpr {
    #[inline(always)]
    fn default() -> Dadpr {
        <crate::RegValueT<Dadpr_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod dadpr {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dpsel_SPEC;
    pub type Dpsel = crate::EnumBitfieldStruct<u8, Dpsel_SPEC>;
    impl Dpsel {
        #[doc = "Right-justified format"]
        pub const _0: Self = Self::new(0);

        #[doc = "Left-justified format"]
        pub const _1: Self = Self::new(1);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Daampcr_SPEC;
impl crate::sealed::RegSpec for Daampcr_SPEC {
    type DataType = u8;
}

#[doc = "D/A Output Amplifier Control Register"]
pub type Daampcr = crate::RegValueT<Daampcr_SPEC>;

impl Daampcr {
    #[doc = "Amplifier Control 0"]
    #[inline(always)]
    pub fn daamp0(
        self,
    ) -> crate::common::RegisterField<
        6,
        0x1,
        1,
        0,
        daampcr::Daamp0,
        daampcr::Daamp0,
        Daampcr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            6,
            0x1,
            1,
            0,
            daampcr::Daamp0,
            daampcr::Daamp0,
            Daampcr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "Amplifier Control 1"]
    #[inline(always)]
    pub fn daamp1(
        self,
    ) -> crate::common::RegisterField<
        7,
        0x1,
        1,
        0,
        daampcr::Daamp1,
        daampcr::Daamp1,
        Daampcr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            7,
            0x1,
            1,
            0,
            daampcr::Daamp1,
            daampcr::Daamp1,
            Daampcr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Daampcr {
    #[inline(always)]
    fn default() -> Daampcr {
        <crate::RegValueT<Daampcr_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod daampcr {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Daamp0_SPEC;
    pub type Daamp0 = crate::EnumBitfieldStruct<u8, Daamp0_SPEC>;
    impl Daamp0 {
        #[doc = "Do not use channel 0 output amplifier (m = 0) Do not use channel 2 output amplifier (m = 1)"]
        pub const _0: Self = Self::new(0);

        #[doc = "Use channel 0 output amplifier (m = 0) Use channel 2 output amplifier (m = 1)"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Daamp1_SPEC;
    pub type Daamp1 = crate::EnumBitfieldStruct<u8, Daamp1_SPEC>;
    impl Daamp1 {
        #[doc = "Do not use channel 1 output amplifier (m = 0) Do not use channel 3 output amplifier (m = 1)"]
        pub const _0: Self = Self::new(0);

        #[doc = "Use channel 1 output amplifier (m = 0) Use channel 3 output amplifier (m = 1)"]
        pub const _1: Self = Self::new(1);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Daaswcr_SPEC;
impl crate::sealed::RegSpec for Daaswcr_SPEC {
    type DataType = u8;
}

#[doc = "D/A Amplifier Stabilization Wait Control Register"]
pub type Daaswcr = crate::RegValueT<Daaswcr_SPEC>;

impl Daaswcr {
    #[doc = "D/A Amplifier Stabilization Wait 0 and D/A internal output control"]
    #[inline(always)]
    pub fn daasw0(
        self,
    ) -> crate::common::RegisterField<
        6,
        0x1,
        1,
        0,
        daaswcr::Daasw0,
        daaswcr::Daasw0,
        Daaswcr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            6,
            0x1,
            1,
            0,
            daaswcr::Daasw0,
            daaswcr::Daasw0,
            Daaswcr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "D/A Amplifier Stabilization Wait 1 and D/A internal output control"]
    #[inline(always)]
    pub fn daasw1(
        self,
    ) -> crate::common::RegisterField<
        7,
        0x1,
        1,
        0,
        daaswcr::Daasw1,
        daaswcr::Daasw1,
        Daaswcr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            7,
            0x1,
            1,
            0,
            daaswcr::Daasw1,
            daaswcr::Daasw1,
            Daaswcr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Daaswcr {
    #[inline(always)]
    fn default() -> Daaswcr {
        <crate::RegValueT<Daaswcr_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod daaswcr {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Daasw0_SPEC;
    pub type Daasw0 = crate::EnumBitfieldStruct<u8, Daasw0_SPEC>;
    impl Daasw0 {
        #[doc = "For output to external pin: Amplifier stabilization wait off (output) for channel 0 For output to internal module: Disable output for channel 0"]
        pub const _0: Self = Self::new(0);

        #[doc = "For output to external pin: Amplifier stabilization wait on (high-Z) for channel 0 For output to internal module: Enable output for channel 0"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Daasw1_SPEC;
    pub type Daasw1 = crate::EnumBitfieldStruct<u8, Daasw1_SPEC>;
    impl Daasw1 {
        #[doc = "For output to external pin: Amplifier stabilization wait off (output) for channel 1 For output to internal module: Disable output for channel 1"]
        pub const _0: Self = Self::new(0);

        #[doc = "For output to external pin: Amplifier stabilization wait on (high-Z) for channel 1 For output to internal module: Enable output for channel 1"]
        pub const _1: Self = Self::new(1);
    }
}