#[doc = r"Register block"]
#[repr(C)]
pub struct RegisterBlock {
#[doc = "0x00 - GPIO bit select register"]
pub bt_select: BT_SELECT,
#[doc = "0x04 - GPIO0 ~ 31 output register"]
pub out: OUT,
#[doc = "0x08 - GPIO0 ~ 31 output bit set register"]
pub out_w1ts: OUT_W1TS,
#[doc = "0x0c - GPIO0 ~ 31 output bit clear register"]
pub out_w1tc: OUT_W1TC,
#[doc = "0x10 - GPIO32 ~ 53 output register"]
pub out1: OUT1,
#[doc = "0x14 - GPIO32 ~ 53 output bit set register"]
pub out1_w1ts: OUT1_W1TS,
#[doc = "0x18 - GPIO32 ~ 53 output bit clear register"]
pub out1_w1tc: OUT1_W1TC,
#[doc = "0x1c - GPIO SDIO selection register"]
pub sdio_select: SDIO_SELECT,
#[doc = "0x20 - GPIO0 ~ 31 output enable register"]
pub enable: ENABLE,
#[doc = "0x24 - GPIO0 ~ 31 output enable bit set register"]
pub enable_w1ts: ENABLE_W1TS,
#[doc = "0x28 - GPIO0 ~ 31 output enable bit clear register"]
pub enable_w1tc: ENABLE_W1TC,
#[doc = "0x2c - GPIO32 ~ 53 output enable register"]
pub enable1: ENABLE1,
#[doc = "0x30 - GPIO32 ~ 53 output enable bit set register"]
pub enable1_w1ts: ENABLE1_W1TS,
#[doc = "0x34 - GPIO32 ~ 53 output enable bit clear register"]
pub enable1_w1tc: ENABLE1_W1TC,
#[doc = "0x38 - Bootstrap pin value register"]
pub strap: STRAP,
#[doc = "0x3c - GPIO0 ~ 31 input register"]
pub in_: IN,
#[doc = "0x40 - GPIO32 ~ 53 input register"]
pub in1: IN1,
#[doc = "0x44 - GPIO0 ~ 31 interrupt status register"]
pub status: STATUS,
#[doc = "0x48 - GPIO0 ~ 31 interrupt status bit set register"]
pub status_w1ts: STATUS_W1TS,
#[doc = "0x4c - GPIO0 ~ 31 interrupt status bit clear register"]
pub status_w1tc: STATUS_W1TC,
#[doc = "0x50 - GPIO32 ~ 53 interrupt status register"]
pub status1: STATUS1,
#[doc = "0x54 - GPIO32 ~ 53 interrupt status bit set register"]
pub status1_w1ts: STATUS1_W1TS,
#[doc = "0x58 - GPIO32 ~ 53 interrupt status bit clear register"]
pub status1_w1tc: STATUS1_W1TC,
#[doc = "0x5c - GPIO0 ~ 31 PRO_CPU interrupt status register"]
pub pcpu_int: PCPU_INT,
#[doc = "0x60 - GPIO0 ~ 31 PRO_CPU non-maskable interrupt status register"]
pub pcpu_nmi_int: PCPU_NMI_INT,
#[doc = "0x64 - GPIO0 ~ 31 CPU SDIO interrupt status register"]
pub cpusdio_int: CPUSDIO_INT,
#[doc = "0x68 - GPIO32 ~ 53 PRO_CPU interrupt status register"]
pub pcpu_int1: PCPU_INT1,
#[doc = "0x6c - GPIO32 ~ 53 PRO_CPU non-maskable interrupt status register"]
pub pcpu_nmi_int1: PCPU_NMI_INT1,
#[doc = "0x70 - GPIO32 ~ 53 CPU SDIO interrupt status register"]
pub cpusdio_int1: CPUSDIO_INT1,
#[doc = "0x74..0x14c - Configuration for GPIO pin %s"]
pub pin: [PIN; 54],
#[doc = "0x14c - GPIO0 ~ 31 interrupt source register"]
pub status_next: STATUS_NEXT,
#[doc = "0x150 - GPIO32 ~ 53 interrupt source register"]
pub status_next1: STATUS_NEXT1,
#[doc = "0x154..0x554 - Peripheral function %s input selection register"]
pub func_in_sel_cfg: [FUNC_IN_SEL_CFG; 256],
#[doc = "0x554..0x62c - Peripheral output selection for GPIO %s"]
pub func_out_sel_cfg: [FUNC_OUT_SEL_CFG; 54],
#[doc = "0x62c - GPIO clock gating register"]
pub clock_gate: CLOCK_GATE,
_reserved35: [u8; 0xcc],
#[doc = "0x6fc - Version control register"]
pub reg_date: REG_DATE,
}
#[doc = "BT_SELECT (rw) register accessor: an alias for `Reg<BT_SELECT_SPEC>`"]
pub type BT_SELECT = crate::Reg<bt_select::BT_SELECT_SPEC>;
#[doc = "GPIO bit select register"]
pub mod bt_select;
#[doc = "OUT (rw) register accessor: an alias for `Reg<OUT_SPEC>`"]
pub type OUT = crate::Reg<out::OUT_SPEC>;
#[doc = "GPIO0 ~ 31 output register"]
pub mod out;
#[doc = "OUT_W1TS (w) register accessor: an alias for `Reg<OUT_W1TS_SPEC>`"]
pub type OUT_W1TS = crate::Reg<out_w1ts::OUT_W1TS_SPEC>;
#[doc = "GPIO0 ~ 31 output bit set register"]
pub mod out_w1ts;
#[doc = "OUT_W1TC (w) register accessor: an alias for `Reg<OUT_W1TC_SPEC>`"]
pub type OUT_W1TC = crate::Reg<out_w1tc::OUT_W1TC_SPEC>;
#[doc = "GPIO0 ~ 31 output bit clear register"]
pub mod out_w1tc;
#[doc = "OUT1 (rw) register accessor: an alias for `Reg<OUT1_SPEC>`"]
pub type OUT1 = crate::Reg<out1::OUT1_SPEC>;
#[doc = "GPIO32 ~ 53 output register"]
pub mod out1;
#[doc = "OUT1_W1TS (w) register accessor: an alias for `Reg<OUT1_W1TS_SPEC>`"]
pub type OUT1_W1TS = crate::Reg<out1_w1ts::OUT1_W1TS_SPEC>;
#[doc = "GPIO32 ~ 53 output bit set register"]
pub mod out1_w1ts;
#[doc = "OUT1_W1TC (w) register accessor: an alias for `Reg<OUT1_W1TC_SPEC>`"]
pub type OUT1_W1TC = crate::Reg<out1_w1tc::OUT1_W1TC_SPEC>;
#[doc = "GPIO32 ~ 53 output bit clear register"]
pub mod out1_w1tc;
#[doc = "SDIO_SELECT (rw) register accessor: an alias for `Reg<SDIO_SELECT_SPEC>`"]
pub type SDIO_SELECT = crate::Reg<sdio_select::SDIO_SELECT_SPEC>;
#[doc = "GPIO SDIO selection register"]
pub mod sdio_select;
#[doc = "ENABLE (rw) register accessor: an alias for `Reg<ENABLE_SPEC>`"]
pub type ENABLE = crate::Reg<enable::ENABLE_SPEC>;
#[doc = "GPIO0 ~ 31 output enable register"]
pub mod enable;
#[doc = "ENABLE_W1TS (w) register accessor: an alias for `Reg<ENABLE_W1TS_SPEC>`"]
pub type ENABLE_W1TS = crate::Reg<enable_w1ts::ENABLE_W1TS_SPEC>;
#[doc = "GPIO0 ~ 31 output enable bit set register"]
pub mod enable_w1ts;
#[doc = "ENABLE_W1TC (w) register accessor: an alias for `Reg<ENABLE_W1TC_SPEC>`"]
pub type ENABLE_W1TC = crate::Reg<enable_w1tc::ENABLE_W1TC_SPEC>;
#[doc = "GPIO0 ~ 31 output enable bit clear register"]
pub mod enable_w1tc;
#[doc = "ENABLE1 (rw) register accessor: an alias for `Reg<ENABLE1_SPEC>`"]
pub type ENABLE1 = crate::Reg<enable1::ENABLE1_SPEC>;
#[doc = "GPIO32 ~ 53 output enable register"]
pub mod enable1;
#[doc = "ENABLE1_W1TS (w) register accessor: an alias for `Reg<ENABLE1_W1TS_SPEC>`"]
pub type ENABLE1_W1TS = crate::Reg<enable1_w1ts::ENABLE1_W1TS_SPEC>;
#[doc = "GPIO32 ~ 53 output enable bit set register"]
pub mod enable1_w1ts;
#[doc = "ENABLE1_W1TC (w) register accessor: an alias for `Reg<ENABLE1_W1TC_SPEC>`"]
pub type ENABLE1_W1TC = crate::Reg<enable1_w1tc::ENABLE1_W1TC_SPEC>;
#[doc = "GPIO32 ~ 53 output enable bit clear register"]
pub mod enable1_w1tc;
#[doc = "STRAP (r) register accessor: an alias for `Reg<STRAP_SPEC>`"]
pub type STRAP = crate::Reg<strap::STRAP_SPEC>;
#[doc = "Bootstrap pin value register"]
pub mod strap;
#[doc = "IN (rw) register accessor: an alias for `Reg<IN_SPEC>`"]
pub type IN = crate::Reg<in_::IN_SPEC>;
#[doc = "GPIO0 ~ 31 input register"]
pub mod in_;
#[doc = "IN1 (r) register accessor: an alias for `Reg<IN1_SPEC>`"]
pub type IN1 = crate::Reg<in1::IN1_SPEC>;
#[doc = "GPIO32 ~ 53 input register"]
pub mod in1;
#[doc = "STATUS (rw) register accessor: an alias for `Reg<STATUS_SPEC>`"]
pub type STATUS = crate::Reg<status::STATUS_SPEC>;
#[doc = "GPIO0 ~ 31 interrupt status register"]
pub mod status;
#[doc = "STATUS_W1TS (w) register accessor: an alias for `Reg<STATUS_W1TS_SPEC>`"]
pub type STATUS_W1TS = crate::Reg<status_w1ts::STATUS_W1TS_SPEC>;
#[doc = "GPIO0 ~ 31 interrupt status bit set register"]
pub mod status_w1ts;
#[doc = "STATUS_W1TC (w) register accessor: an alias for `Reg<STATUS_W1TC_SPEC>`"]
pub type STATUS_W1TC = crate::Reg<status_w1tc::STATUS_W1TC_SPEC>;
#[doc = "GPIO0 ~ 31 interrupt status bit clear register"]
pub mod status_w1tc;
#[doc = "STATUS1 (rw) register accessor: an alias for `Reg<STATUS1_SPEC>`"]
pub type STATUS1 = crate::Reg<status1::STATUS1_SPEC>;
#[doc = "GPIO32 ~ 53 interrupt status register"]
pub mod status1;
#[doc = "STATUS1_W1TS (w) register accessor: an alias for `Reg<STATUS1_W1TS_SPEC>`"]
pub type STATUS1_W1TS = crate::Reg<status1_w1ts::STATUS1_W1TS_SPEC>;
#[doc = "GPIO32 ~ 53 interrupt status bit set register"]
pub mod status1_w1ts;
#[doc = "STATUS1_W1TC (w) register accessor: an alias for `Reg<STATUS1_W1TC_SPEC>`"]
pub type STATUS1_W1TC = crate::Reg<status1_w1tc::STATUS1_W1TC_SPEC>;
#[doc = "GPIO32 ~ 53 interrupt status bit clear register"]
pub mod status1_w1tc;
#[doc = "PCPU_INT (r) register accessor: an alias for `Reg<PCPU_INT_SPEC>`"]
pub type PCPU_INT = crate::Reg<pcpu_int::PCPU_INT_SPEC>;
#[doc = "GPIO0 ~ 31 PRO_CPU interrupt status register"]
pub mod pcpu_int;
#[doc = "PCPU_NMI_INT (r) register accessor: an alias for `Reg<PCPU_NMI_INT_SPEC>`"]
pub type PCPU_NMI_INT = crate::Reg<pcpu_nmi_int::PCPU_NMI_INT_SPEC>;
#[doc = "GPIO0 ~ 31 PRO_CPU non-maskable interrupt status register"]
pub mod pcpu_nmi_int;
#[doc = "CPUSDIO_INT (r) register accessor: an alias for `Reg<CPUSDIO_INT_SPEC>`"]
pub type CPUSDIO_INT = crate::Reg<cpusdio_int::CPUSDIO_INT_SPEC>;
#[doc = "GPIO0 ~ 31 CPU SDIO interrupt status register"]
pub mod cpusdio_int;
#[doc = "PCPU_INT1 (r) register accessor: an alias for `Reg<PCPU_INT1_SPEC>`"]
pub type PCPU_INT1 = crate::Reg<pcpu_int1::PCPU_INT1_SPEC>;
#[doc = "GPIO32 ~ 53 PRO_CPU interrupt status register"]
pub mod pcpu_int1;
#[doc = "PCPU_NMI_INT1 (r) register accessor: an alias for `Reg<PCPU_NMI_INT1_SPEC>`"]
pub type PCPU_NMI_INT1 = crate::Reg<pcpu_nmi_int1::PCPU_NMI_INT1_SPEC>;
#[doc = "GPIO32 ~ 53 PRO_CPU non-maskable interrupt status register"]
pub mod pcpu_nmi_int1;
#[doc = "CPUSDIO_INT1 (r) register accessor: an alias for `Reg<CPUSDIO_INT1_SPEC>`"]
pub type CPUSDIO_INT1 = crate::Reg<cpusdio_int1::CPUSDIO_INT1_SPEC>;
#[doc = "GPIO32 ~ 53 CPU SDIO interrupt status register"]
pub mod cpusdio_int1;
#[doc = "PIN (rw) register accessor: an alias for `Reg<PIN_SPEC>`"]
pub type PIN = crate::Reg<pin::PIN_SPEC>;
#[doc = "Configuration for GPIO pin %s"]
pub mod pin;
#[doc = "STATUS_NEXT (r) register accessor: an alias for `Reg<STATUS_NEXT_SPEC>`"]
pub type STATUS_NEXT = crate::Reg<status_next::STATUS_NEXT_SPEC>;
#[doc = "GPIO0 ~ 31 interrupt source register"]
pub mod status_next;
#[doc = "STATUS_NEXT1 (r) register accessor: an alias for `Reg<STATUS_NEXT1_SPEC>`"]
pub type STATUS_NEXT1 = crate::Reg<status_next1::STATUS_NEXT1_SPEC>;
#[doc = "GPIO32 ~ 53 interrupt source register"]
pub mod status_next1;
#[doc = "FUNC_IN_SEL_CFG (rw) register accessor: an alias for `Reg<FUNC_IN_SEL_CFG_SPEC>`"]
pub type FUNC_IN_SEL_CFG = crate::Reg<func_in_sel_cfg::FUNC_IN_SEL_CFG_SPEC>;
#[doc = "Peripheral function %s input selection register"]
pub mod func_in_sel_cfg;
#[doc = "FUNC_OUT_SEL_CFG (rw) register accessor: an alias for `Reg<FUNC_OUT_SEL_CFG_SPEC>`"]
pub type FUNC_OUT_SEL_CFG = crate::Reg<func_out_sel_cfg::FUNC_OUT_SEL_CFG_SPEC>;
#[doc = "Peripheral output selection for GPIO %s"]
pub mod func_out_sel_cfg;
#[doc = "CLOCK_GATE (rw) register accessor: an alias for `Reg<CLOCK_GATE_SPEC>`"]
pub type CLOCK_GATE = crate::Reg<clock_gate::CLOCK_GATE_SPEC>;
#[doc = "GPIO clock gating register"]
pub mod clock_gate;
#[doc = "REG_DATE (rw) register accessor: an alias for `Reg<REG_DATE_SPEC>`"]
pub type REG_DATE = crate::Reg<reg_date::REG_DATE_SPEC>;
#[doc = "Version control register"]
pub mod reg_date;