#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
#[doc = "Register block"]
pub struct RegisterBlock {
fifo: FIFO,
int_raw: INT_RAW,
int_st: INT_ST,
int_ena: INT_ENA,
int_clr: INT_CLR,
clkdiv: CLKDIV,
autobaud: AUTOBAUD,
status: STATUS,
conf0: CONF0,
conf1: CONF1,
lowpulse: LOWPULSE,
highpulse: HIGHPULSE,
rxd_cnt: RXD_CNT,
flow_conf: FLOW_CONF,
sleep_conf: SLEEP_CONF,
swfc_conf: SWFC_CONF,
idle_conf: IDLE_CONF,
rs485_conf: RS485_CONF,
at_cmd_precnt: AT_CMD_PRECNT,
at_cmd_postcnt: AT_CMD_POSTCNT,
at_cmd_gaptout: AT_CMD_GAPTOUT,
at_cmd_char: AT_CMD_CHAR,
mem_conf: MEM_CONF,
mem_tx_status: MEM_TX_STATUS,
mem_rx_status: MEM_RX_STATUS,
mem_cnt_status: MEM_CNT_STATUS,
pospulse: POSPULSE,
negpulse: NEGPULSE,
_reserved28: [u8; 0x08],
date: DATE,
id: ID,
}
impl RegisterBlock {
#[doc = "0x00 - "]
#[inline(always)]
pub const fn fifo(&self) -> &FIFO {
&self.fifo
}
#[doc = "0x04 - "]
#[inline(always)]
pub const fn int_raw(&self) -> &INT_RAW {
&self.int_raw
}
#[doc = "0x08 - "]
#[inline(always)]
pub const fn int_st(&self) -> &INT_ST {
&self.int_st
}
#[doc = "0x0c - "]
#[inline(always)]
pub const fn int_ena(&self) -> &INT_ENA {
&self.int_ena
}
#[doc = "0x10 - "]
#[inline(always)]
pub const fn int_clr(&self) -> &INT_CLR {
&self.int_clr
}
#[doc = "0x14 - "]
#[inline(always)]
pub const fn clkdiv(&self) -> &CLKDIV {
&self.clkdiv
}
#[doc = "0x18 - "]
#[inline(always)]
pub const fn autobaud(&self) -> &AUTOBAUD {
&self.autobaud
}
#[doc = "0x1c - "]
#[inline(always)]
pub const fn status(&self) -> &STATUS {
&self.status
}
#[doc = "0x20 - "]
#[inline(always)]
pub const fn conf0(&self) -> &CONF0 {
&self.conf0
}
#[doc = "0x24 - "]
#[inline(always)]
pub const fn conf1(&self) -> &CONF1 {
&self.conf1
}
#[doc = "0x28 - "]
#[inline(always)]
pub const fn lowpulse(&self) -> &LOWPULSE {
&self.lowpulse
}
#[doc = "0x2c - "]
#[inline(always)]
pub const fn highpulse(&self) -> &HIGHPULSE {
&self.highpulse
}
#[doc = "0x30 - "]
#[inline(always)]
pub const fn rxd_cnt(&self) -> &RXD_CNT {
&self.rxd_cnt
}
#[doc = "0x34 - "]
#[inline(always)]
pub const fn flow_conf(&self) -> &FLOW_CONF {
&self.flow_conf
}
#[doc = "0x38 - "]
#[inline(always)]
pub const fn sleep_conf(&self) -> &SLEEP_CONF {
&self.sleep_conf
}
#[doc = "0x3c - "]
#[inline(always)]
pub const fn swfc_conf(&self) -> &SWFC_CONF {
&self.swfc_conf
}
#[doc = "0x40 - "]
#[inline(always)]
pub const fn idle_conf(&self) -> &IDLE_CONF {
&self.idle_conf
}
#[doc = "0x44 - "]
#[inline(always)]
pub const fn rs485_conf(&self) -> &RS485_CONF {
&self.rs485_conf
}
#[doc = "0x48 - "]
#[inline(always)]
pub const fn at_cmd_precnt(&self) -> &AT_CMD_PRECNT {
&self.at_cmd_precnt
}
#[doc = "0x4c - "]
#[inline(always)]
pub const fn at_cmd_postcnt(&self) -> &AT_CMD_POSTCNT {
&self.at_cmd_postcnt
}
#[doc = "0x50 - "]
#[inline(always)]
pub const fn at_cmd_gaptout(&self) -> &AT_CMD_GAPTOUT {
&self.at_cmd_gaptout
}
#[doc = "0x54 - "]
#[inline(always)]
pub const fn at_cmd_char(&self) -> &AT_CMD_CHAR {
&self.at_cmd_char
}
#[doc = "0x58 - "]
#[inline(always)]
pub const fn mem_conf(&self) -> &MEM_CONF {
&self.mem_conf
}
#[doc = "0x5c - "]
#[inline(always)]
pub const fn mem_tx_status(&self) -> &MEM_TX_STATUS {
&self.mem_tx_status
}
#[doc = "0x60 - "]
#[inline(always)]
pub const fn mem_rx_status(&self) -> &MEM_RX_STATUS {
&self.mem_rx_status
}
#[doc = "0x64 - "]
#[inline(always)]
pub const fn mem_cnt_status(&self) -> &MEM_CNT_STATUS {
&self.mem_cnt_status
}
#[doc = "0x68 - "]
#[inline(always)]
pub const fn pospulse(&self) -> &POSPULSE {
&self.pospulse
}
#[doc = "0x6c - "]
#[inline(always)]
pub const fn negpulse(&self) -> &NEGPULSE {
&self.negpulse
}
#[doc = "0x78 - "]
#[inline(always)]
pub const fn date(&self) -> &DATE {
&self.date
}
#[doc = "0x7c - "]
#[inline(always)]
pub const fn id(&self) -> &ID {
&self.id
}
}
#[doc = "FIFO (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`fifo::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`fifo::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@fifo`] module"]
pub type FIFO = crate::Reg<fifo::FIFO_SPEC>;
#[doc = ""]
pub mod fifo;
#[doc = "INT_RAW (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`int_raw::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_raw`] module"]
pub type INT_RAW = crate::Reg<int_raw::INT_RAW_SPEC>;
#[doc = ""]
pub mod int_raw;
#[doc = "INT_ST (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`int_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_st`] module"]
pub type INT_ST = crate::Reg<int_st::INT_ST_SPEC>;
#[doc = ""]
pub mod int_st;
#[doc = "INT_ENA (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`int_ena::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_ena::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_ena`] module"]
pub type INT_ENA = crate::Reg<int_ena::INT_ENA_SPEC>;
#[doc = ""]
pub mod int_ena;
#[doc = "INT_CLR (w) register accessor: \n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_clr`] module"]
pub type INT_CLR = crate::Reg<int_clr::INT_CLR_SPEC>;
#[doc = ""]
pub mod int_clr;
#[doc = "CLKDIV (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`clkdiv::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`clkdiv::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@clkdiv`] module"]
pub type CLKDIV = crate::Reg<clkdiv::CLKDIV_SPEC>;
#[doc = ""]
pub mod clkdiv;
#[doc = "AUTOBAUD (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`autobaud::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`autobaud::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@autobaud`] module"]
pub type AUTOBAUD = crate::Reg<autobaud::AUTOBAUD_SPEC>;
#[doc = ""]
pub mod autobaud;
#[doc = "STATUS (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`status::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@status`] module"]
pub type STATUS = crate::Reg<status::STATUS_SPEC>;
#[doc = ""]
pub mod status;
#[doc = "CONF0 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`conf0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`conf0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@conf0`] module"]
pub type CONF0 = crate::Reg<conf0::CONF0_SPEC>;
#[doc = ""]
pub mod conf0;
#[doc = "CONF1 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`conf1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`conf1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@conf1`] module"]
pub type CONF1 = crate::Reg<conf1::CONF1_SPEC>;
#[doc = ""]
pub mod conf1;
#[doc = "LOWPULSE (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`lowpulse::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@lowpulse`] module"]
pub type LOWPULSE = crate::Reg<lowpulse::LOWPULSE_SPEC>;
#[doc = ""]
pub mod lowpulse;
#[doc = "HIGHPULSE (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`highpulse::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@highpulse`] module"]
pub type HIGHPULSE = crate::Reg<highpulse::HIGHPULSE_SPEC>;
#[doc = ""]
pub mod highpulse;
#[doc = "RXD_CNT (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`rxd_cnt::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rxd_cnt`] module"]
pub type RXD_CNT = crate::Reg<rxd_cnt::RXD_CNT_SPEC>;
#[doc = ""]
pub mod rxd_cnt;
#[doc = "FLOW_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`flow_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`flow_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@flow_conf`] module"]
pub type FLOW_CONF = crate::Reg<flow_conf::FLOW_CONF_SPEC>;
#[doc = ""]
pub mod flow_conf;
#[doc = "SLEEP_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`sleep_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`sleep_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@sleep_conf`] module"]
pub type SLEEP_CONF = crate::Reg<sleep_conf::SLEEP_CONF_SPEC>;
#[doc = ""]
pub mod sleep_conf;
#[doc = "SWFC_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`swfc_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`swfc_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@swfc_conf`] module"]
pub type SWFC_CONF = crate::Reg<swfc_conf::SWFC_CONF_SPEC>;
#[doc = ""]
pub mod swfc_conf;
#[doc = "IDLE_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`idle_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`idle_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@idle_conf`] module"]
pub type IDLE_CONF = crate::Reg<idle_conf::IDLE_CONF_SPEC>;
#[doc = ""]
pub mod idle_conf;
#[doc = "RS485_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`rs485_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`rs485_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@rs485_conf`] module"]
pub type RS485_CONF = crate::Reg<rs485_conf::RS485_CONF_SPEC>;
#[doc = ""]
pub mod rs485_conf;
#[doc = "AT_CMD_PRECNT (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`at_cmd_precnt::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`at_cmd_precnt::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@at_cmd_precnt`] module"]
pub type AT_CMD_PRECNT = crate::Reg<at_cmd_precnt::AT_CMD_PRECNT_SPEC>;
#[doc = ""]
pub mod at_cmd_precnt;
#[doc = "AT_CMD_POSTCNT (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`at_cmd_postcnt::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`at_cmd_postcnt::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@at_cmd_postcnt`] module"]
pub type AT_CMD_POSTCNT = crate::Reg<at_cmd_postcnt::AT_CMD_POSTCNT_SPEC>;
#[doc = ""]
pub mod at_cmd_postcnt;
#[doc = "AT_CMD_GAPTOUT (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`at_cmd_gaptout::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`at_cmd_gaptout::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@at_cmd_gaptout`] module"]
pub type AT_CMD_GAPTOUT = crate::Reg<at_cmd_gaptout::AT_CMD_GAPTOUT_SPEC>;
#[doc = ""]
pub mod at_cmd_gaptout;
#[doc = "AT_CMD_CHAR (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`at_cmd_char::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`at_cmd_char::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@at_cmd_char`] module"]
pub type AT_CMD_CHAR = crate::Reg<at_cmd_char::AT_CMD_CHAR_SPEC>;
#[doc = ""]
pub mod at_cmd_char;
#[doc = "MEM_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`mem_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`mem_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@mem_conf`] module"]
pub type MEM_CONF = crate::Reg<mem_conf::MEM_CONF_SPEC>;
#[doc = ""]
pub mod mem_conf;
#[doc = "MEM_TX_STATUS (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`mem_tx_status::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@mem_tx_status`] module"]
pub type MEM_TX_STATUS = crate::Reg<mem_tx_status::MEM_TX_STATUS_SPEC>;
#[doc = ""]
pub mod mem_tx_status;
#[doc = "MEM_RX_STATUS (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`mem_rx_status::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@mem_rx_status`] module"]
pub type MEM_RX_STATUS = crate::Reg<mem_rx_status::MEM_RX_STATUS_SPEC>;
#[doc = ""]
pub mod mem_rx_status;
#[doc = "MEM_CNT_STATUS (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`mem_cnt_status::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@mem_cnt_status`] module"]
pub type MEM_CNT_STATUS = crate::Reg<mem_cnt_status::MEM_CNT_STATUS_SPEC>;
#[doc = ""]
pub mod mem_cnt_status;
#[doc = "POSPULSE (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`pospulse::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pospulse`] module"]
pub type POSPULSE = crate::Reg<pospulse::POSPULSE_SPEC>;
#[doc = ""]
pub mod pospulse;
#[doc = "NEGPULSE (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`negpulse::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@negpulse`] module"]
pub type NEGPULSE = crate::Reg<negpulse::NEGPULSE_SPEC>;
#[doc = ""]
pub mod negpulse;
pub use crate::apb_ctrl::{date, DATE};
#[doc = "ID (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`id::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`id::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@id`] module"]
pub type ID = crate::Reg<id::ID_SPEC>;
#[doc = ""]
pub mod id;