#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
#[doc = "Register block"]
pub struct RegisterBlock {
options0: OPTIONS0,
slp_timer0: SLP_TIMER0,
slp_timer1: SLP_TIMER1,
time_update: TIME_UPDATE,
time0: TIME0,
time1: TIME1,
state0: STATE0,
timer1: TIMER1,
timer2: TIMER2,
timer3: TIMER3,
timer4: TIMER4,
timer5: TIMER5,
ana_conf: ANA_CONF,
reset_state: RESET_STATE,
wakeup_state: WAKEUP_STATE,
int_ena: INT_ENA,
int_raw: INT_RAW,
int_st: INT_ST,
int_clr: INT_CLR,
store0: STORE0,
store1: STORE1,
store2: STORE2,
store3: STORE3,
ext_xtl_conf: EXT_XTL_CONF,
ext_wakeup_conf: EXT_WAKEUP_CONF,
slp_reject_conf: SLP_REJECT_CONF,
cpu_period_conf: CPU_PERIOD_CONF,
sdio_act_conf: SDIO_ACT_CONF,
clk_conf: CLK_CONF,
sdio_conf: SDIO_CONF,
bias_conf: BIAS_CONF,
reg: REG,
pwc: PWC,
dig_pwc: DIG_PWC,
dig_iso: DIG_ISO,
wdtconfig0: WDTCONFIG0,
wdtconfig: [WDTCONFIG; 4],
wdtfeed: WDTFEED,
wdtwprotect: WDTWPROTECT,
test_mux: TEST_MUX,
sw_cpu_stall: SW_CPU_STALL,
store4: STORE4,
store5: STORE5,
store6: STORE6,
store7: STORE7,
low_power_st: LOW_POWER_ST,
diag1: DIAG1,
hold_force: HOLD_FORCE,
ext_wakeup1: EXT_WAKEUP1,
ext_wakeup1_status: EXT_WAKEUP1_STATUS,
brown_out: BROWN_OUT,
_reserved51: [u8; 0x64],
date: DATE,
}
impl RegisterBlock {
#[doc = "0x00 - "]
#[inline(always)]
pub const fn options0(&self) -> &OPTIONS0 {
&self.options0
}
#[doc = "0x04 - "]
#[inline(always)]
pub const fn slp_timer0(&self) -> &SLP_TIMER0 {
&self.slp_timer0
}
#[doc = "0x08 - "]
#[inline(always)]
pub const fn slp_timer1(&self) -> &SLP_TIMER1 {
&self.slp_timer1
}
#[doc = "0x0c - "]
#[inline(always)]
pub const fn time_update(&self) -> &TIME_UPDATE {
&self.time_update
}
#[doc = "0x10 - "]
#[inline(always)]
pub const fn time0(&self) -> &TIME0 {
&self.time0
}
#[doc = "0x14 - "]
#[inline(always)]
pub const fn time1(&self) -> &TIME1 {
&self.time1
}
#[doc = "0x18 - "]
#[inline(always)]
pub const fn state0(&self) -> &STATE0 {
&self.state0
}
#[doc = "0x1c - "]
#[inline(always)]
pub const fn timer1(&self) -> &TIMER1 {
&self.timer1
}
#[doc = "0x20 - "]
#[inline(always)]
pub const fn timer2(&self) -> &TIMER2 {
&self.timer2
}
#[doc = "0x24 - "]
#[inline(always)]
pub const fn timer3(&self) -> &TIMER3 {
&self.timer3
}
#[doc = "0x28 - "]
#[inline(always)]
pub const fn timer4(&self) -> &TIMER4 {
&self.timer4
}
#[doc = "0x2c - "]
#[inline(always)]
pub const fn timer5(&self) -> &TIMER5 {
&self.timer5
}
#[doc = "0x30 - "]
#[inline(always)]
pub const fn ana_conf(&self) -> &ANA_CONF {
&self.ana_conf
}
#[doc = "0x34 - "]
#[inline(always)]
pub const fn reset_state(&self) -> &RESET_STATE {
&self.reset_state
}
#[doc = "0x38 - "]
#[inline(always)]
pub const fn wakeup_state(&self) -> &WAKEUP_STATE {
&self.wakeup_state
}
#[doc = "0x3c - "]
#[inline(always)]
pub const fn int_ena(&self) -> &INT_ENA {
&self.int_ena
}
#[doc = "0x40 - "]
#[inline(always)]
pub const fn int_raw(&self) -> &INT_RAW {
&self.int_raw
}
#[doc = "0x44 - "]
#[inline(always)]
pub const fn int_st(&self) -> &INT_ST {
&self.int_st
}
#[doc = "0x48 - "]
#[inline(always)]
pub const fn int_clr(&self) -> &INT_CLR {
&self.int_clr
}
#[doc = "0x4c - "]
#[inline(always)]
pub const fn store0(&self) -> &STORE0 {
&self.store0
}
#[doc = "0x50 - "]
#[inline(always)]
pub const fn store1(&self) -> &STORE1 {
&self.store1
}
#[doc = "0x54 - "]
#[inline(always)]
pub const fn store2(&self) -> &STORE2 {
&self.store2
}
#[doc = "0x58 - "]
#[inline(always)]
pub const fn store3(&self) -> &STORE3 {
&self.store3
}
#[doc = "0x5c - "]
#[inline(always)]
pub const fn ext_xtl_conf(&self) -> &EXT_XTL_CONF {
&self.ext_xtl_conf
}
#[doc = "0x60 - "]
#[inline(always)]
pub const fn ext_wakeup_conf(&self) -> &EXT_WAKEUP_CONF {
&self.ext_wakeup_conf
}
#[doc = "0x64 - "]
#[inline(always)]
pub const fn slp_reject_conf(&self) -> &SLP_REJECT_CONF {
&self.slp_reject_conf
}
#[doc = "0x68 - "]
#[inline(always)]
pub const fn cpu_period_conf(&self) -> &CPU_PERIOD_CONF {
&self.cpu_period_conf
}
#[doc = "0x6c - "]
#[inline(always)]
pub const fn sdio_act_conf(&self) -> &SDIO_ACT_CONF {
&self.sdio_act_conf
}
#[doc = "0x70 - "]
#[inline(always)]
pub const fn clk_conf(&self) -> &CLK_CONF {
&self.clk_conf
}
#[doc = "0x74 - "]
#[inline(always)]
pub const fn sdio_conf(&self) -> &SDIO_CONF {
&self.sdio_conf
}
#[doc = "0x78 - "]
#[inline(always)]
pub const fn bias_conf(&self) -> &BIAS_CONF {
&self.bias_conf
}
#[doc = "0x7c - "]
#[inline(always)]
pub const fn reg(&self) -> ® {
&self.reg
}
#[doc = "0x80 - "]
#[inline(always)]
pub const fn pwc(&self) -> &PWC {
&self.pwc
}
#[doc = "0x84 - "]
#[inline(always)]
pub const fn dig_pwc(&self) -> &DIG_PWC {
&self.dig_pwc
}
#[doc = "0x88 - "]
#[inline(always)]
pub const fn dig_iso(&self) -> &DIG_ISO {
&self.dig_iso
}
#[doc = "0x8c - "]
#[inline(always)]
pub const fn wdtconfig0(&self) -> &WDTCONFIG0 {
&self.wdtconfig0
}
#[doc = "0x90..0xa0 - "]
#[doc = ""]
#[doc = "<div class=\"warning\">`n` is the index of register in the array. `n == 0` corresponds to `WDTCONFIG1` register.</div>"]
#[inline(always)]
pub const fn wdtconfig(&self, n: usize) -> &WDTCONFIG {
&self.wdtconfig[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x90..0xa0 - "]
#[inline(always)]
pub fn wdtconfig_iter(&self) -> impl Iterator<Item = &WDTCONFIG> {
self.wdtconfig.iter()
}
#[doc = "0x90 - WDTCONFIG1"]
#[inline(always)]
pub const fn wdtconfig1(&self) -> &WDTCONFIG {
self.wdtconfig(0)
}
#[doc = "0x94 - WDTCONFIG2"]
#[inline(always)]
pub const fn wdtconfig2(&self) -> &WDTCONFIG {
self.wdtconfig(1)
}
#[doc = "0x98 - WDTCONFIG3"]
#[inline(always)]
pub const fn wdtconfig3(&self) -> &WDTCONFIG {
self.wdtconfig(2)
}
#[doc = "0x9c - WDTCONFIG4"]
#[inline(always)]
pub const fn wdtconfig4(&self) -> &WDTCONFIG {
self.wdtconfig(3)
}
#[doc = "0xa0 - "]
#[inline(always)]
pub const fn wdtfeed(&self) -> &WDTFEED {
&self.wdtfeed
}
#[doc = "0xa4 - "]
#[inline(always)]
pub const fn wdtwprotect(&self) -> &WDTWPROTECT {
&self.wdtwprotect
}
#[doc = "0xa8 - "]
#[inline(always)]
pub const fn test_mux(&self) -> &TEST_MUX {
&self.test_mux
}
#[doc = "0xac - "]
#[inline(always)]
pub const fn sw_cpu_stall(&self) -> &SW_CPU_STALL {
&self.sw_cpu_stall
}
#[doc = "0xb0 - "]
#[inline(always)]
pub const fn store4(&self) -> &STORE4 {
&self.store4
}
#[doc = "0xb4 - "]
#[inline(always)]
pub const fn store5(&self) -> &STORE5 {
&self.store5
}
#[doc = "0xb8 - "]
#[inline(always)]
pub const fn store6(&self) -> &STORE6 {
&self.store6
}
#[doc = "0xbc - "]
#[inline(always)]
pub const fn store7(&self) -> &STORE7 {
&self.store7
}
#[doc = "0xc0 - "]
#[inline(always)]
pub const fn low_power_st(&self) -> &LOW_POWER_ST {
&self.low_power_st
}
#[doc = "0xc4 - "]
#[inline(always)]
pub const fn diag1(&self) -> &DIAG1 {
&self.diag1
}
#[doc = "0xc8 - "]
#[inline(always)]
pub const fn hold_force(&self) -> &HOLD_FORCE {
&self.hold_force
}
#[doc = "0xcc - "]
#[inline(always)]
pub const fn ext_wakeup1(&self) -> &EXT_WAKEUP1 {
&self.ext_wakeup1
}
#[doc = "0xd0 - "]
#[inline(always)]
pub const fn ext_wakeup1_status(&self) -> &EXT_WAKEUP1_STATUS {
&self.ext_wakeup1_status
}
#[doc = "0xd4 - "]
#[inline(always)]
pub const fn brown_out(&self) -> &BROWN_OUT {
&self.brown_out
}
#[doc = "0x13c - "]
#[inline(always)]
pub const fn date(&self) -> &DATE {
&self.date
}
}
#[doc = "OPTIONS0 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`options0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`options0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@options0`] module"]
pub type OPTIONS0 = crate::Reg<options0::OPTIONS0_SPEC>;
#[doc = ""]
pub mod options0;
#[doc = "SLP_TIMER0 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`slp_timer0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`slp_timer0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@slp_timer0`] module"]
pub type SLP_TIMER0 = crate::Reg<slp_timer0::SLP_TIMER0_SPEC>;
#[doc = ""]
pub mod slp_timer0;
#[doc = "SLP_TIMER1 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`slp_timer1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`slp_timer1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@slp_timer1`] module"]
pub type SLP_TIMER1 = crate::Reg<slp_timer1::SLP_TIMER1_SPEC>;
#[doc = ""]
pub mod slp_timer1;
#[doc = "TIME_UPDATE (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`time_update::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`time_update::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@time_update`] module"]
pub type TIME_UPDATE = crate::Reg<time_update::TIME_UPDATE_SPEC>;
#[doc = ""]
pub mod time_update;
#[doc = "TIME0 (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`time0::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@time0`] module"]
pub type TIME0 = crate::Reg<time0::TIME0_SPEC>;
#[doc = ""]
pub mod time0;
#[doc = "TIME1 (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`time1::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@time1`] module"]
pub type TIME1 = crate::Reg<time1::TIME1_SPEC>;
#[doc = ""]
pub mod time1;
#[doc = "STATE0 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`state0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`state0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@state0`] module"]
pub type STATE0 = crate::Reg<state0::STATE0_SPEC>;
#[doc = ""]
pub mod state0;
#[doc = "TIMER1 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`timer1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`timer1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer1`] module"]
pub type TIMER1 = crate::Reg<timer1::TIMER1_SPEC>;
#[doc = ""]
pub mod timer1;
#[doc = "TIMER2 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`timer2::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`timer2::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer2`] module"]
pub type TIMER2 = crate::Reg<timer2::TIMER2_SPEC>;
#[doc = ""]
pub mod timer2;
#[doc = "TIMER3 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`timer3::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`timer3::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer3`] module"]
pub type TIMER3 = crate::Reg<timer3::TIMER3_SPEC>;
#[doc = ""]
pub mod timer3;
#[doc = "TIMER4 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`timer4::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`timer4::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer4`] module"]
pub type TIMER4 = crate::Reg<timer4::TIMER4_SPEC>;
#[doc = ""]
pub mod timer4;
#[doc = "TIMER5 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`timer5::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`timer5::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@timer5`] module"]
pub type TIMER5 = crate::Reg<timer5::TIMER5_SPEC>;
#[doc = ""]
pub mod timer5;
#[doc = "ANA_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`ana_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ana_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ana_conf`] module"]
pub type ANA_CONF = crate::Reg<ana_conf::ANA_CONF_SPEC>;
#[doc = ""]
pub mod ana_conf;
#[doc = "RESET_STATE (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`reset_state::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`reset_state::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@reset_state`] module"]
pub type RESET_STATE = crate::Reg<reset_state::RESET_STATE_SPEC>;
#[doc = ""]
pub mod reset_state;
#[doc = "WAKEUP_STATE (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`wakeup_state::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`wakeup_state::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wakeup_state`] module"]
pub type WAKEUP_STATE = crate::Reg<wakeup_state::WAKEUP_STATE_SPEC>;
#[doc = ""]
pub mod wakeup_state;
#[doc = "INT_ENA (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`int_ena::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_ena::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_ena`] module"]
pub type INT_ENA = crate::Reg<int_ena::INT_ENA_SPEC>;
#[doc = ""]
pub mod int_ena;
#[doc = "INT_RAW (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`int_raw::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_raw`] module"]
pub type INT_RAW = crate::Reg<int_raw::INT_RAW_SPEC>;
#[doc = ""]
pub mod int_raw;
#[doc = "INT_ST (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`int_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_st`] module"]
pub type INT_ST = crate::Reg<int_st::INT_ST_SPEC>;
#[doc = ""]
pub mod int_st;
#[doc = "INT_CLR (w) register accessor: \n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_clr`] module"]
pub type INT_CLR = crate::Reg<int_clr::INT_CLR_SPEC>;
#[doc = ""]
pub mod int_clr;
#[doc = "STORE0 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`store0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`store0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@store0`] module"]
pub type STORE0 = crate::Reg<store0::STORE0_SPEC>;
#[doc = ""]
pub mod store0;
pub use store0 as store1;
pub use store0 as store2;
pub use store0 as store3;
pub use STORE0 as STORE1;
pub use STORE0 as STORE2;
pub use STORE0 as STORE3;
#[doc = "EXT_XTL_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`ext_xtl_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ext_xtl_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ext_xtl_conf`] module"]
pub type EXT_XTL_CONF = crate::Reg<ext_xtl_conf::EXT_XTL_CONF_SPEC>;
#[doc = ""]
pub mod ext_xtl_conf;
#[doc = "EXT_WAKEUP_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`ext_wakeup_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ext_wakeup_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ext_wakeup_conf`] module"]
pub type EXT_WAKEUP_CONF = crate::Reg<ext_wakeup_conf::EXT_WAKEUP_CONF_SPEC>;
#[doc = ""]
pub mod ext_wakeup_conf;
#[doc = "SLP_REJECT_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`slp_reject_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`slp_reject_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@slp_reject_conf`] module"]
pub type SLP_REJECT_CONF = crate::Reg<slp_reject_conf::SLP_REJECT_CONF_SPEC>;
#[doc = ""]
pub mod slp_reject_conf;
#[doc = "CPU_PERIOD_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`cpu_period_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`cpu_period_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@cpu_period_conf`] module"]
pub type CPU_PERIOD_CONF = crate::Reg<cpu_period_conf::CPU_PERIOD_CONF_SPEC>;
#[doc = ""]
pub mod cpu_period_conf;
#[doc = "SDIO_ACT_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`sdio_act_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`sdio_act_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@sdio_act_conf`] module"]
pub type SDIO_ACT_CONF = crate::Reg<sdio_act_conf::SDIO_ACT_CONF_SPEC>;
#[doc = ""]
pub mod sdio_act_conf;
#[doc = "CLK_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`clk_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`clk_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@clk_conf`] module"]
pub type CLK_CONF = crate::Reg<clk_conf::CLK_CONF_SPEC>;
#[doc = ""]
pub mod clk_conf;
#[doc = "SDIO_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`sdio_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`sdio_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@sdio_conf`] module"]
pub type SDIO_CONF = crate::Reg<sdio_conf::SDIO_CONF_SPEC>;
#[doc = ""]
pub mod sdio_conf;
#[doc = "BIAS_CONF (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`bias_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`bias_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@bias_conf`] module"]
pub type BIAS_CONF = crate::Reg<bias_conf::BIAS_CONF_SPEC>;
#[doc = ""]
pub mod bias_conf;
#[doc = "REG (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`reg::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`reg::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@reg`] module"]
pub type REG = crate::Reg<reg::REG_SPEC>;
#[doc = ""]
pub mod reg;
#[doc = "PWC (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`pwc::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`pwc::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@pwc`] module"]
pub type PWC = crate::Reg<pwc::PWC_SPEC>;
#[doc = ""]
pub mod pwc;
#[doc = "DIG_PWC (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dig_pwc::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`dig_pwc::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dig_pwc`] module"]
pub type DIG_PWC = crate::Reg<dig_pwc::DIG_PWC_SPEC>;
#[doc = ""]
pub mod dig_pwc;
#[doc = "DIG_ISO (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`dig_iso::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`dig_iso::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@dig_iso`] module"]
pub type DIG_ISO = crate::Reg<dig_iso::DIG_ISO_SPEC>;
#[doc = ""]
pub mod dig_iso;
#[doc = "WDTCONFIG0 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`wdtconfig0::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`wdtconfig0::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtconfig0`] module"]
pub type WDTCONFIG0 = crate::Reg<wdtconfig0::WDTCONFIG0_SPEC>;
#[doc = ""]
pub mod wdtconfig0;
#[doc = "WDTCONFIG (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`wdtconfig::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`wdtconfig::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtconfig`] module"]
pub type WDTCONFIG = crate::Reg<wdtconfig::WDTCONFIG_SPEC>;
#[doc = ""]
pub mod wdtconfig;
#[doc = "WDTFEED (w) register accessor: \n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`wdtfeed::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtfeed`] module"]
pub type WDTFEED = crate::Reg<wdtfeed::WDTFEED_SPEC>;
#[doc = ""]
pub mod wdtfeed;
#[doc = "WDTWPROTECT (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`wdtwprotect::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`wdtwprotect::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@wdtwprotect`] module"]
pub type WDTWPROTECT = crate::Reg<wdtwprotect::WDTWPROTECT_SPEC>;
#[doc = ""]
pub mod wdtwprotect;
#[doc = "TEST_MUX (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`test_mux::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`test_mux::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@test_mux`] module"]
pub type TEST_MUX = crate::Reg<test_mux::TEST_MUX_SPEC>;
#[doc = ""]
pub mod test_mux;
#[doc = "SW_CPU_STALL (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`sw_cpu_stall::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`sw_cpu_stall::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@sw_cpu_stall`] module"]
pub type SW_CPU_STALL = crate::Reg<sw_cpu_stall::SW_CPU_STALL_SPEC>;
#[doc = ""]
pub mod sw_cpu_stall;
pub use store0 as store4;
pub use store0 as store5;
pub use store0 as store6;
pub use store0 as store7;
pub use STORE0 as STORE4;
pub use STORE0 as STORE5;
pub use STORE0 as STORE6;
pub use STORE0 as STORE7;
#[doc = "LOW_POWER_ST (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`low_power_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@low_power_st`] module"]
pub type LOW_POWER_ST = crate::Reg<low_power_st::LOW_POWER_ST_SPEC>;
#[doc = ""]
pub mod low_power_st;
#[doc = "DIAG1 (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`diag1::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@diag1`] module"]
pub type DIAG1 = crate::Reg<diag1::DIAG1_SPEC>;
#[doc = ""]
pub mod diag1;
#[doc = "HOLD_FORCE (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`hold_force::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`hold_force::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@hold_force`] module"]
pub type HOLD_FORCE = crate::Reg<hold_force::HOLD_FORCE_SPEC>;
#[doc = ""]
pub mod hold_force;
#[doc = "EXT_WAKEUP1 (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`ext_wakeup1::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`ext_wakeup1::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ext_wakeup1`] module"]
pub type EXT_WAKEUP1 = crate::Reg<ext_wakeup1::EXT_WAKEUP1_SPEC>;
#[doc = ""]
pub mod ext_wakeup1;
#[doc = "EXT_WAKEUP1_STATUS (r) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`ext_wakeup1_status::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@ext_wakeup1_status`] module"]
pub type EXT_WAKEUP1_STATUS = crate::Reg<ext_wakeup1_status::EXT_WAKEUP1_STATUS_SPEC>;
#[doc = ""]
pub mod ext_wakeup1_status;
#[doc = "BROWN_OUT (rw) register accessor: \n\nYou can [`read`](crate::Reg::read) this register and get [`brown_out::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`brown_out::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@brown_out`] module"]
pub type BROWN_OUT = crate::Reg<brown_out::BROWN_OUT_SPEC>;
#[doc = ""]
pub mod brown_out;
pub use crate::apb_ctrl::{date, DATE};