da14699-pac 0.2.0

/*
DISCLAIMER
This software is supplied by Renesas Electronics Corporation and is only intended for use with Renesas products.
No other uses are authorized. This software is owned by Renesas Electronics Corporation and is protected under all
applicable laws, including copyright laws.
THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING THIS SOFTWARE, WHETHER EXPRESS, IMPLIED
OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT.  ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY
LAW, NEITHER RENESAS ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR
ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Renesas reserves the right, without notice, to make changes to this software and to discontinue the availability
of this software. By using this software, you agree to the additional terms and conditions found by accessing the
following link:
http://www.renesas.com/disclaimer

*/
// Generated from SVD 1.2, with svd2pac 0.6.0 on Thu, 24 Jul 2025 04:45:45 +0000

#![allow(clippy::identity_op)]
#![allow(clippy::module_inception)]
#![allow(clippy::derivable_impls)]
#[allow(unused_imports)]
use crate::common::sealed;
#[allow(unused_imports)]
use crate::common::*;
#[doc = r"WAKEUP registers"]
unsafe impl ::core::marker::Send for super::Wakeup {}
unsafe impl ::core::marker::Sync for super::Wakeup {}
impl super::Wakeup {
    #[allow(unused)]
    #[inline(always)]
    pub(crate) const fn _svd2pac_as_ptr(&self) -> *mut u8 {
        self.ptr
    }

    #[doc = "Clear event register for P0"]
    #[inline(always)]
    pub const fn wkup_clear_p0_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupClearP0Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupClearP0Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(72usize),
            )
        }
    }

    #[doc = "Clear event register for P1"]
    #[inline(always)]
    pub const fn wkup_clear_p1_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupClearP1Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupClearP1Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(76usize),
            )
        }
    }

    #[doc = "Control register for the wakeup counter"]
    #[inline(always)]
    pub const fn wkup_ctrl_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupCtrlReg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupCtrlReg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0usize),
            )
        }
    }

    #[doc = "select the sesitivity polarity for each P0 input"]
    #[inline(always)]
    pub const fn wkup_pol_p0_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupPolP0Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupPolP0Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(40usize),
            )
        }
    }

    #[doc = "select the sesitivity polarity for each P1 input"]
    #[inline(always)]
    pub const fn wkup_pol_p1_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupPolP1Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupPolP1Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(44usize),
            )
        }
    }

    #[doc = "Reset wakeup interrupt"]
    #[inline(always)]
    pub const fn wkup_reset_irq_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupResetIrqReg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupResetIrqReg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(8usize),
            )
        }
    }

    #[doc = "select which inputs from P0 port can trigger wkup counter"]
    #[inline(always)]
    pub const fn wkup_select_p0_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupSelectP0Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupSelectP0Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(20usize),
            )
        }
    }

    #[doc = "select which inputs from P1 port can trigger wkup counter"]
    #[inline(always)]
    pub const fn wkup_select_p1_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupSelectP1Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupSelectP1Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(24usize),
            )
        }
    }

    #[doc = "select which inputs from P0 port can trigger interrupt"]
    #[inline(always)]
    pub const fn wkup_sel_gpio_p0_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupSelGpioP0Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupSelGpioP0Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(84usize),
            )
        }
    }

    #[doc = "select which inputs from P1 port can trigger interrupt"]
    #[inline(always)]
    pub const fn wkup_sel_gpio_p1_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupSelGpioP1Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupSelGpioP1Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(88usize),
            )
        }
    }

    #[doc = "Event status register for P0"]
    #[inline(always)]
    pub const fn wkup_status_p0_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupStatusP0Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupStatusP0Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(60usize),
            )
        }
    }

    #[doc = "Event status register for P1"]
    #[inline(always)]
    pub const fn wkup_status_p1_reg(
        &self,
    ) -> &'static crate::common::Reg<self::WkupStatusP1Reg_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::WkupStatusP1Reg_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(64usize),
            )
        }
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupClearP0Reg_SPEC;
impl crate::sealed::RegSpec for WkupClearP0Reg_SPEC {
    type DataType = u32;
}

#[doc = "Clear event register for P0"]
pub type WkupClearP0Reg = crate::RegValueT<WkupClearP0Reg_SPEC>;

impl WkupClearP0Reg {
    #[doc = "Clear latched value of the GPIOs P0 when corresponding bit is 1"]
    #[inline(always)]
    pub fn wkup_clear_p0(
        self,
    ) -> crate::common::RegisterField<
        0,
        0xffffffff,
        1,
        0,
        u32,
        u32,
        WkupClearP0Reg_SPEC,
        crate::common::W,
    > {
        crate::common::RegisterField::<
            0,
            0xffffffff,
            1,
            0,
            u32,
            u32,
            WkupClearP0Reg_SPEC,
            crate::common::W,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for WkupClearP0Reg {
    #[inline(always)]
    fn default() -> WkupClearP0Reg {
        <crate::RegValueT<WkupClearP0Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupClearP1Reg_SPEC;
impl crate::sealed::RegSpec for WkupClearP1Reg_SPEC {
    type DataType = u32;
}

#[doc = "Clear event register for P1"]
pub type WkupClearP1Reg = crate::RegValueT<WkupClearP1Reg_SPEC>;

impl WkupClearP1Reg {
    #[doc = "Clear latched value of the GPIOs P1 when corresponding bit is 1"]
    #[inline(always)]
    pub fn wkup_clear_p1(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x7fffff,
        1,
        0,
        u32,
        u32,
        WkupClearP1Reg_SPEC,
        crate::common::W,
    > {
        crate::common::RegisterField::<
            0,
            0x7fffff,
            1,
            0,
            u32,
            u32,
            WkupClearP1Reg_SPEC,
            crate::common::W,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for WkupClearP1Reg {
    #[inline(always)]
    fn default() -> WkupClearP1Reg {
        <crate::RegValueT<WkupClearP1Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupCtrlReg_SPEC;
impl crate::sealed::RegSpec for WkupCtrlReg_SPEC {
    type DataType = u32;
}

#[doc = "Control register for the wakeup counter"]
pub type WkupCtrlReg = crate::RegValueT<WkupCtrlReg_SPEC>;

impl WkupCtrlReg {
    #[doc = "0: no interrupt will be enabled\n1: if you have an event an IRQ will be generated"]
    #[inline(always)]
    pub fn wkup_enable_irq(
        self,
    ) -> crate::common::RegisterFieldBool<7, 1, 0, WkupCtrlReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<7,1,0,WkupCtrlReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "0 = no effect\n1 = emulate key hit. First make this bit 0 before any new key hit can be sensed."]
    #[inline(always)]
    pub fn wkup_sft_keyhit(
        self,
    ) -> crate::common::RegisterFieldBool<6, 1, 0, WkupCtrlReg_SPEC, crate::common::RW> {
        crate::common::RegisterFieldBool::<6,1,0,WkupCtrlReg_SPEC,crate::common::RW>::from_register(self,0)
    }

    #[doc = "Wakeup debounce time. If set to 0, no debouncing will be done.\nDebounce time: N*1 ms. N =1..63"]
    #[inline(always)]
    pub fn wkup_deb_value(
        self,
    ) -> crate::common::RegisterField<0, 0x3f, 1, 0, u8, u8, WkupCtrlReg_SPEC, crate::common::RW>
    {
        crate::common::RegisterField::<0,0x3f,1,0,u8,u8,WkupCtrlReg_SPEC,crate::common::RW>::from_register(self,0)
    }
}
impl ::core::default::Default for WkupCtrlReg {
    #[inline(always)]
    fn default() -> WkupCtrlReg {
        <crate::RegValueT<WkupCtrlReg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupPolP0Reg_SPEC;
impl crate::sealed::RegSpec for WkupPolP0Reg_SPEC {
    type DataType = u32;
}

#[doc = "select the sesitivity polarity for each P0 input"]
pub type WkupPolP0Reg = crate::RegValueT<WkupPolP0Reg_SPEC>;

impl WkupPolP0Reg {
    #[doc = "0: enabled input P0_xx will give an event if that input goes high\n1: enabled input P0_xx will give an event if that input goes low"]
    #[inline(always)]
    pub fn wkup_pol_p0(
        self,
    ) -> crate::common::RegisterField<
        0,
        0xffffffff,
        1,
        0,
        u32,
        u32,
        WkupPolP0Reg_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0xffffffff,
            1,
            0,
            u32,
            u32,
            WkupPolP0Reg_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for WkupPolP0Reg {
    #[inline(always)]
    fn default() -> WkupPolP0Reg {
        <crate::RegValueT<WkupPolP0Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupPolP1Reg_SPEC;
impl crate::sealed::RegSpec for WkupPolP1Reg_SPEC {
    type DataType = u32;
}

#[doc = "select the sesitivity polarity for each P1 input"]
pub type WkupPolP1Reg = crate::RegValueT<WkupPolP1Reg_SPEC>;

impl WkupPolP1Reg {
    #[doc = "0: enabled input P1_xx will give an event if that input goes high\n1: enabled input P1_xx will give an event if that input goes low"]
    #[inline(always)]
    pub fn wkup_pol_p1(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x7fffff,
        1,
        0,
        u32,
        u32,
        WkupPolP1Reg_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x7fffff,
            1,
            0,
            u32,
            u32,
            WkupPolP1Reg_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for WkupPolP1Reg {
    #[inline(always)]
    fn default() -> WkupPolP1Reg {
        <crate::RegValueT<WkupPolP1Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupResetIrqReg_SPEC;
impl crate::sealed::RegSpec for WkupResetIrqReg_SPEC {
    type DataType = u32;
}

#[doc = "Reset wakeup interrupt"]
pub type WkupResetIrqReg = crate::RegValueT<WkupResetIrqReg_SPEC>;

impl WkupResetIrqReg {
    #[doc = "writing any value to this register will reset the interrupt. reading always returns 0."]
    #[inline(always)]
    pub fn wkup_irq_rst(
        self,
    ) -> crate::common::RegisterField<
        0,
        0xffff,
        1,
        0,
        u16,
        u16,
        WkupResetIrqReg_SPEC,
        crate::common::W,
    > {
        crate::common::RegisterField::<
            0,
            0xffff,
            1,
            0,
            u16,
            u16,
            WkupResetIrqReg_SPEC,
            crate::common::W,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for WkupResetIrqReg {
    #[inline(always)]
    fn default() -> WkupResetIrqReg {
        <crate::RegValueT<WkupResetIrqReg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupSelectP0Reg_SPEC;
impl crate::sealed::RegSpec for WkupSelectP0Reg_SPEC {
    type DataType = u32;
}

#[doc = "select which inputs from P0 port can trigger wkup counter"]
pub type WkupSelectP0Reg = crate::RegValueT<WkupSelectP0Reg_SPEC>;

impl WkupSelectP0Reg {
    #[doc = "0: input P0_xx is not enabled for wakeup event\n1: input P0_xx is enabled for wakeup event"]
    #[inline(always)]
    pub fn wkup_select_p0(
        self,
    ) -> crate::common::RegisterField<
        0,
        0xffffffff,
        1,
        0,
        u32,
        u32,
        WkupSelectP0Reg_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0xffffffff,
            1,
            0,
            u32,
            u32,
            WkupSelectP0Reg_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for WkupSelectP0Reg {
    #[inline(always)]
    fn default() -> WkupSelectP0Reg {
        <crate::RegValueT<WkupSelectP0Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupSelectP1Reg_SPEC;
impl crate::sealed::RegSpec for WkupSelectP1Reg_SPEC {
    type DataType = u32;
}

#[doc = "select which inputs from P1 port can trigger wkup counter"]
pub type WkupSelectP1Reg = crate::RegValueT<WkupSelectP1Reg_SPEC>;

impl WkupSelectP1Reg {
    #[doc = "0: input P1_xx is not enabled for wakeup event\n1: input P1_xx is enabled for wakeup event"]
    #[inline(always)]
    pub fn wkup_select_p1(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x7fffff,
        1,
        0,
        u32,
        u32,
        WkupSelectP1Reg_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x7fffff,
            1,
            0,
            u32,
            u32,
            WkupSelectP1Reg_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for WkupSelectP1Reg {
    #[inline(always)]
    fn default() -> WkupSelectP1Reg {
        <crate::RegValueT<WkupSelectP1Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupSelGpioP0Reg_SPEC;
impl crate::sealed::RegSpec for WkupSelGpioP0Reg_SPEC {
    type DataType = u32;
}

#[doc = "select which inputs from P0 port can trigger interrupt"]
pub type WkupSelGpioP0Reg = crate::RegValueT<WkupSelGpioP0Reg_SPEC>;

impl WkupSelGpioP0Reg {
    #[doc = "0: input P0_xx is not enabled for GPIO interrupt\n1: input P0_xx is enabled for GPIO interrupt"]
    #[inline(always)]
    pub fn wkup_sel_gpio_p0(
        self,
    ) -> crate::common::RegisterField<
        0,
        0xffffffff,
        1,
        0,
        u32,
        u32,
        WkupSelGpioP0Reg_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0xffffffff,
            1,
            0,
            u32,
            u32,
            WkupSelGpioP0Reg_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for WkupSelGpioP0Reg {
    #[inline(always)]
    fn default() -> WkupSelGpioP0Reg {
        <crate::RegValueT<WkupSelGpioP0Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupSelGpioP1Reg_SPEC;
impl crate::sealed::RegSpec for WkupSelGpioP1Reg_SPEC {
    type DataType = u32;
}

#[doc = "select which inputs from P1 port can trigger interrupt"]
pub type WkupSelGpioP1Reg = crate::RegValueT<WkupSelGpioP1Reg_SPEC>;

impl WkupSelGpioP1Reg {
    #[doc = "0: input P1_xx is not enabled for GPIO interrupt\n1: input P1_xx is enabled for GPIO interrupt"]
    #[inline(always)]
    pub fn wkup_sel_gpio_p1(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x7fffff,
        1,
        0,
        u32,
        u32,
        WkupSelGpioP1Reg_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x7fffff,
            1,
            0,
            u32,
            u32,
            WkupSelGpioP1Reg_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for WkupSelGpioP1Reg {
    #[inline(always)]
    fn default() -> WkupSelGpioP1Reg {
        <crate::RegValueT<WkupSelGpioP1Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupStatusP0Reg_SPEC;
impl crate::sealed::RegSpec for WkupStatusP0Reg_SPEC {
    type DataType = u32;
}

#[doc = "Event status register for P0"]
pub type WkupStatusP0Reg = crate::RegValueT<WkupStatusP0Reg_SPEC>;

impl WkupStatusP0Reg {
    #[doc = "Contains the latched value of any toggle of the GPIOs Port P0. WKUP_STAT_P0\\[0\\] -> P0_00."]
    #[inline(always)]
    pub fn wkup_stat_p0(
        self,
    ) -> crate::common::RegisterField<
        0,
        0xffffffff,
        1,
        0,
        u32,
        u32,
        WkupStatusP0Reg_SPEC,
        crate::common::R,
    > {
        crate::common::RegisterField::<
            0,
            0xffffffff,
            1,
            0,
            u32,
            u32,
            WkupStatusP0Reg_SPEC,
            crate::common::R,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for WkupStatusP0Reg {
    #[inline(always)]
    fn default() -> WkupStatusP0Reg {
        <crate::RegValueT<WkupStatusP0Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}

#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct WkupStatusP1Reg_SPEC;
impl crate::sealed::RegSpec for WkupStatusP1Reg_SPEC {
    type DataType = u32;
}

#[doc = "Event status register for P1"]
pub type WkupStatusP1Reg = crate::RegValueT<WkupStatusP1Reg_SPEC>;

impl WkupStatusP1Reg {
    #[doc = "Contains the latched value of any toggle of the GPIOs Port P1 WKUP_STATUS_1\\[0\\] -> P1_00."]
    #[inline(always)]
    pub fn wkup_stat_p1(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x7fffff,
        1,
        0,
        u32,
        u32,
        WkupStatusP1Reg_SPEC,
        crate::common::R,
    > {
        crate::common::RegisterField::<
            0,
            0x7fffff,
            1,
            0,
            u32,
            u32,
            WkupStatusP1Reg_SPEC,
            crate::common::R,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for WkupStatusP1Reg {
    #[inline(always)]
    fn default() -> WkupStatusP1Reg {
        <crate::RegValueT<WkupStatusP1Reg_SPEC> as RegisterValue<_>>::new(0)
    }
}