#![allow(clippy::identity_op)]
#![allow(clippy::module_inception)]
#![allow(clippy::derivable_impls)]
#[allow(unused_imports)]
use crate::common::sealed;
#[allow(unused_imports)]
use crate::common::*;
#[doc = r"TIMER4 registers"]
unsafe impl ::core::marker::Send for super::Timer4 {}
unsafe impl ::core::marker::Sync for super::Timer4 {}
impl super::Timer4 {
#[allow(unused)]
#[inline(always)]
pub(crate) const fn _svd2pac_as_ptr(&self) -> *mut u8 {
self.ptr
}
#[doc = "Timer value for event on GPIO1"]
#[inline(always)]
pub const fn timer4_capture_gpio1_reg(
&self,
) -> &'static crate::common::Reg<self::Timer4CaptureGpio1Reg_SPEC, crate::common::RW> {
unsafe {
crate::common::Reg::<self::Timer4CaptureGpio1Reg_SPEC, crate::common::RW>::from_ptr(
self._svd2pac_as_ptr().add(32usize),
)
}
}
#[doc = "Timer value for event on GPIO2"]
#[inline(always)]
pub const fn timer4_capture_gpio2_reg(
&self,
) -> &'static crate::common::Reg<self::Timer4CaptureGpio2Reg_SPEC, crate::common::RW> {
unsafe {
crate::common::Reg::<self::Timer4CaptureGpio2Reg_SPEC, crate::common::RW>::from_ptr(
self._svd2pac_as_ptr().add(36usize),
)
}
}
#[doc = "Timer clear interrupt"]
#[inline(always)]
pub const fn timer4_clear_irq_reg(
&self,
) -> &'static crate::common::Reg<self::Timer4ClearIrqReg_SPEC, crate::common::RW> {
unsafe {
crate::common::Reg::<self::Timer4ClearIrqReg_SPEC, crate::common::RW>::from_ptr(
self._svd2pac_as_ptr().add(52usize),
)
}
}
#[doc = "Timer control register"]
#[inline(always)]
pub const fn timer4_ctrl_reg(
&self,
) -> &'static crate::common::Reg<self::Timer4CtrlReg_SPEC, crate::common::RW> {
unsafe {
crate::common::Reg::<self::Timer4CtrlReg_SPEC, crate::common::RW>::from_ptr(
self._svd2pac_as_ptr().add(0usize),
)
}
}
#[doc = "Timer gpio1 selection"]
#[inline(always)]
pub const fn timer4_gpio1_conf_reg(
&self,
) -> &'static crate::common::Reg<self::Timer4Gpio1ConfReg_SPEC, crate::common::RW> {
unsafe {
crate::common::Reg::<self::Timer4Gpio1ConfReg_SPEC, crate::common::RW>::from_ptr(
self._svd2pac_as_ptr().add(12usize),
)
}
}
#[doc = "Timer gpio2 selection"]
#[inline(always)]
pub const fn timer4_gpio2_conf_reg(
&self,
) -> &'static crate::common::Reg<self::Timer4Gpio2ConfReg_SPEC, crate::common::RW> {
unsafe {
crate::common::Reg::<self::Timer4Gpio2ConfReg_SPEC, crate::common::RW>::from_ptr(
self._svd2pac_as_ptr().add(16usize),
)
}
}
#[doc = "Timer prescaler value"]
#[inline(always)]
pub const fn timer4_prescaler_reg(
&self,
) -> &'static crate::common::Reg<self::Timer4PrescalerReg_SPEC, crate::common::RW> {
unsafe {
crate::common::Reg::<self::Timer4PrescalerReg_SPEC, crate::common::RW>::from_ptr(
self._svd2pac_as_ptr().add(28usize),
)
}
}
#[doc = "Timer prescaler counter valuew"]
#[inline(always)]
pub const fn timer4_prescaler_val_reg(
&self,
) -> &'static crate::common::Reg<self::Timer4PrescalerValReg_SPEC, crate::common::RW> {
unsafe {
crate::common::Reg::<self::Timer4PrescalerValReg_SPEC, crate::common::RW>::from_ptr(
self._svd2pac_as_ptr().add(40usize),
)
}
}
#[doc = "Timer pwm dc register"]
#[inline(always)]
pub const fn timer4_pwm_dc_reg(
&self,
) -> &'static crate::common::Reg<self::Timer4PwmDcReg_SPEC, crate::common::RW> {
unsafe {
crate::common::Reg::<self::Timer4PwmDcReg_SPEC, crate::common::RW>::from_ptr(
self._svd2pac_as_ptr().add(48usize),
)
}
}
#[doc = "Timer pwm frequency register"]
#[inline(always)]
pub const fn timer4_pwm_freq_reg(
&self,
) -> &'static crate::common::Reg<self::Timer4PwmFreqReg_SPEC, crate::common::RW> {
unsafe {
crate::common::Reg::<self::Timer4PwmFreqReg_SPEC, crate::common::RW>::from_ptr(
self._svd2pac_as_ptr().add(44usize),
)
}
}
#[doc = "Timer reload value and Delay in shot mode"]
#[inline(always)]
pub const fn timer4_reload_reg(
&self,
) -> &'static crate::common::Reg<self::Timer4ReloadReg_SPEC, crate::common::RW> {
unsafe {
crate::common::Reg::<self::Timer4ReloadReg_SPEC, crate::common::RW>::from_ptr(
self._svd2pac_as_ptr().add(20usize),
)
}
}
#[doc = "Timer status register"]
#[inline(always)]
pub const fn timer4_status_reg(
&self,
) -> &'static crate::common::Reg<self::Timer4StatusReg_SPEC, crate::common::RW> {
unsafe {
crate::common::Reg::<self::Timer4StatusReg_SPEC, crate::common::RW>::from_ptr(
self._svd2pac_as_ptr().add(8usize),
)
}
}
#[doc = "Timer counter value"]
#[inline(always)]
pub const fn timer4_timer_val_reg(
&self,
) -> &'static crate::common::Reg<self::Timer4TimerValReg_SPEC, crate::common::RW> {
unsafe {
crate::common::Reg::<self::Timer4TimerValReg_SPEC, crate::common::RW>::from_ptr(
self._svd2pac_as_ptr().add(4usize),
)
}
}
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Timer4CaptureGpio1Reg_SPEC;
impl crate::sealed::RegSpec for Timer4CaptureGpio1Reg_SPEC {
type DataType = u32;
}
#[doc = "Timer value for event on GPIO1"]
pub type Timer4CaptureGpio1Reg = crate::RegValueT<Timer4CaptureGpio1Reg_SPEC>;
impl Timer4CaptureGpio1Reg {
#[doc = "Gives the Capture time for event on GPIO1"]
#[inline(always)]
pub fn tim_capture_gpio1(
self,
) -> crate::common::RegisterField<
0,
0xffffff,
1,
0,
u32,
u32,
Timer4CaptureGpio1Reg_SPEC,
crate::common::R,
> {
crate::common::RegisterField::<
0,
0xffffff,
1,
0,
u32,
u32,
Timer4CaptureGpio1Reg_SPEC,
crate::common::R,
>::from_register(self, 0)
}
}
impl ::core::default::Default for Timer4CaptureGpio1Reg {
#[inline(always)]
fn default() -> Timer4CaptureGpio1Reg {
<crate::RegValueT<Timer4CaptureGpio1Reg_SPEC> as RegisterValue<_>>::new(0)
}
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Timer4CaptureGpio2Reg_SPEC;
impl crate::sealed::RegSpec for Timer4CaptureGpio2Reg_SPEC {
type DataType = u32;
}
#[doc = "Timer value for event on GPIO2"]
pub type Timer4CaptureGpio2Reg = crate::RegValueT<Timer4CaptureGpio2Reg_SPEC>;
impl Timer4CaptureGpio2Reg {
#[doc = "Gives the Capture time for event on GPIO2"]
#[inline(always)]
pub fn tim_capture_gpio2(
self,
) -> crate::common::RegisterField<
0,
0xffffff,
1,
0,
u32,
u32,
Timer4CaptureGpio2Reg_SPEC,
crate::common::R,
> {
crate::common::RegisterField::<
0,
0xffffff,
1,
0,
u32,
u32,
Timer4CaptureGpio2Reg_SPEC,
crate::common::R,
>::from_register(self, 0)
}
}
impl ::core::default::Default for Timer4CaptureGpio2Reg {
#[inline(always)]
fn default() -> Timer4CaptureGpio2Reg {
<crate::RegValueT<Timer4CaptureGpio2Reg_SPEC> as RegisterValue<_>>::new(0)
}
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Timer4ClearIrqReg_SPEC;
impl crate::sealed::RegSpec for Timer4ClearIrqReg_SPEC {
type DataType = u32;
}
#[doc = "Timer clear interrupt"]
pub type Timer4ClearIrqReg = crate::RegValueT<Timer4ClearIrqReg_SPEC>;
impl Timer4ClearIrqReg {
#[doc = "Write any value clear interrupt"]
#[inline(always)]
pub fn tim_clear_irq(
self,
) -> crate::common::RegisterFieldBool<0, 1, 0, Timer4ClearIrqReg_SPEC, crate::common::W> {
crate::common::RegisterFieldBool::<0,1,0,Timer4ClearIrqReg_SPEC,crate::common::W>::from_register(self,0)
}
}
impl ::core::default::Default for Timer4ClearIrqReg {
#[inline(always)]
fn default() -> Timer4ClearIrqReg {
<crate::RegValueT<Timer4ClearIrqReg_SPEC> as RegisterValue<_>>::new(0)
}
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Timer4CtrlReg_SPEC;
impl crate::sealed::RegSpec for Timer4CtrlReg_SPEC {
type DataType = u32;
}
#[doc = "Timer control register"]
pub type Timer4CtrlReg = crate::RegValueT<Timer4CtrlReg_SPEC>;
impl Timer4CtrlReg {
#[doc = "Timer clock enable\n1 = clock enabled\n0 = clock disabled"]
#[inline(always)]
pub fn tim_clk_en(
self,
) -> crate::common::RegisterFieldBool<8, 1, 0, Timer4CtrlReg_SPEC, crate::common::RW> {
crate::common::RegisterFieldBool::<8,1,0,Timer4CtrlReg_SPEC,crate::common::RW>::from_register(self,0)
}
#[doc = "Select clock\n1 = Timer uses the DIVN clock\n0 = Timer uses the lp clock"]
#[inline(always)]
pub fn tim_sys_clk_en(
self,
) -> crate::common::RegisterFieldBool<7, 1, 0, Timer4CtrlReg_SPEC, crate::common::RW> {
crate::common::RegisterFieldBool::<7,1,0,Timer4CtrlReg_SPEC,crate::common::RW>::from_register(self,0)
}
#[doc = "Valid when timer counts up, if it is \'1\' timer does not zero when reaches to reload value. it becomes zero only when it reaches the max value."]
#[inline(always)]
pub fn tim_free_run_mode_en(
self,
) -> crate::common::RegisterFieldBool<6, 1, 0, Timer4CtrlReg_SPEC, crate::common::RW> {
crate::common::RegisterFieldBool::<6,1,0,Timer4CtrlReg_SPEC,crate::common::RW>::from_register(self,0)
}
#[doc = "Interrupt mask\n1 = timer IRQ is unmasked\n0 = timer IRQ is masked"]
#[inline(always)]
pub fn tim_irq_en(
self,
) -> crate::common::RegisterFieldBool<5, 1, 0, Timer4CtrlReg_SPEC, crate::common::RW> {
crate::common::RegisterFieldBool::<5,1,0,Timer4CtrlReg_SPEC,crate::common::RW>::from_register(self,0)
}
#[doc = "Event input 2 edge type\n1 = falling edge\n0 = rising edge"]
#[inline(always)]
pub fn tim_in2_event_fall_en(
self,
) -> crate::common::RegisterFieldBool<4, 1, 0, Timer4CtrlReg_SPEC, crate::common::RW> {
crate::common::RegisterFieldBool::<4,1,0,Timer4CtrlReg_SPEC,crate::common::RW>::from_register(self,0)
}
#[doc = "Event input 1 edge type\n1 = falling edge\n0 = rising edge"]
#[inline(always)]
pub fn tim_in1_event_fall_en(
self,
) -> crate::common::RegisterFieldBool<3, 1, 0, Timer4CtrlReg_SPEC, crate::common::RW> {
crate::common::RegisterFieldBool::<3,1,0,Timer4CtrlReg_SPEC,crate::common::RW>::from_register(self,0)
}
#[doc = "Timer count direction\n1 = down\n0 = up"]
#[inline(always)]
pub fn tim_count_down_en(
self,
) -> crate::common::RegisterFieldBool<2, 1, 0, Timer4CtrlReg_SPEC, crate::common::RW> {
crate::common::RegisterFieldBool::<2,1,0,Timer4CtrlReg_SPEC,crate::common::RW>::from_register(self,0)
}
#[doc = "Timer enable\n1 = On\n0 = Off"]
#[inline(always)]
pub fn tim_en(
self,
) -> crate::common::RegisterFieldBool<0, 1, 0, Timer4CtrlReg_SPEC, crate::common::RW> {
crate::common::RegisterFieldBool::<0,1,0,Timer4CtrlReg_SPEC,crate::common::RW>::from_register(self,0)
}
}
impl ::core::default::Default for Timer4CtrlReg {
#[inline(always)]
fn default() -> Timer4CtrlReg {
<crate::RegValueT<Timer4CtrlReg_SPEC> as RegisterValue<_>>::new(0)
}
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Timer4Gpio1ConfReg_SPEC;
impl crate::sealed::RegSpec for Timer4Gpio1ConfReg_SPEC {
type DataType = u32;
}
#[doc = "Timer gpio1 selection"]
pub type Timer4Gpio1ConfReg = crate::RegValueT<Timer4Gpio1ConfReg_SPEC>;
impl Timer4Gpio1ConfReg {
#[doc = "Select one of the 32 GPIOs as IN1, Valid value 0-32. 1 for the first gpio, 32 for the last gpio. 0 Disable input"]
#[inline(always)]
pub fn tim_gpio1_conf(
self,
) -> crate::common::RegisterField<
0,
0x3f,
1,
0,
u8,
u8,
Timer4Gpio1ConfReg_SPEC,
crate::common::RW,
> {
crate::common::RegisterField::<
0,
0x3f,
1,
0,
u8,
u8,
Timer4Gpio1ConfReg_SPEC,
crate::common::RW,
>::from_register(self, 0)
}
}
impl ::core::default::Default for Timer4Gpio1ConfReg {
#[inline(always)]
fn default() -> Timer4Gpio1ConfReg {
<crate::RegValueT<Timer4Gpio1ConfReg_SPEC> as RegisterValue<_>>::new(0)
}
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Timer4Gpio2ConfReg_SPEC;
impl crate::sealed::RegSpec for Timer4Gpio2ConfReg_SPEC {
type DataType = u32;
}
#[doc = "Timer gpio2 selection"]
pub type Timer4Gpio2ConfReg = crate::RegValueT<Timer4Gpio2ConfReg_SPEC>;
impl Timer4Gpio2ConfReg {
#[doc = "Select one of the 32 GPIOs as IN2, Valid value 0-32. 1 for the first gpio, 32 for the last gpio. 0 Disable input"]
#[inline(always)]
pub fn tim_gpio2_conf(
self,
) -> crate::common::RegisterField<
0,
0x3f,
1,
0,
u8,
u8,
Timer4Gpio2ConfReg_SPEC,
crate::common::RW,
> {
crate::common::RegisterField::<
0,
0x3f,
1,
0,
u8,
u8,
Timer4Gpio2ConfReg_SPEC,
crate::common::RW,
>::from_register(self, 0)
}
}
impl ::core::default::Default for Timer4Gpio2ConfReg {
#[inline(always)]
fn default() -> Timer4Gpio2ConfReg {
<crate::RegValueT<Timer4Gpio2ConfReg_SPEC> as RegisterValue<_>>::new(0)
}
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Timer4PrescalerReg_SPEC;
impl crate::sealed::RegSpec for Timer4PrescalerReg_SPEC {
type DataType = u32;
}
#[doc = "Timer prescaler value"]
pub type Timer4PrescalerReg = crate::RegValueT<Timer4PrescalerReg_SPEC>;
impl Timer4PrescalerReg {
#[doc = "Defines the timer count frequency. CLOCK frequency / (TIM_PRESCALER+1)"]
#[inline(always)]
pub fn tim_prescaler(
self,
) -> crate::common::RegisterField<
0,
0x1f,
1,
0,
u8,
u8,
Timer4PrescalerReg_SPEC,
crate::common::RW,
> {
crate::common::RegisterField::<
0,
0x1f,
1,
0,
u8,
u8,
Timer4PrescalerReg_SPEC,
crate::common::RW,
>::from_register(self, 0)
}
}
impl ::core::default::Default for Timer4PrescalerReg {
#[inline(always)]
fn default() -> Timer4PrescalerReg {
<crate::RegValueT<Timer4PrescalerReg_SPEC> as RegisterValue<_>>::new(0)
}
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Timer4PrescalerValReg_SPEC;
impl crate::sealed::RegSpec for Timer4PrescalerValReg_SPEC {
type DataType = u32;
}
#[doc = "Timer prescaler counter valuew"]
pub type Timer4PrescalerValReg = crate::RegValueT<Timer4PrescalerValReg_SPEC>;
impl Timer4PrescalerValReg {
#[doc = "Gives the current prescaler counter value"]
#[inline(always)]
pub fn tim_prescaler_val(
self,
) -> crate::common::RegisterField<
0,
0x1f,
1,
0,
u8,
u8,
Timer4PrescalerValReg_SPEC,
crate::common::R,
> {
crate::common::RegisterField::<
0,
0x1f,
1,
0,
u8,
u8,
Timer4PrescalerValReg_SPEC,
crate::common::R,
>::from_register(self, 0)
}
}
impl ::core::default::Default for Timer4PrescalerValReg {
#[inline(always)]
fn default() -> Timer4PrescalerValReg {
<crate::RegValueT<Timer4PrescalerValReg_SPEC> as RegisterValue<_>>::new(0)
}
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Timer4PwmDcReg_SPEC;
impl crate::sealed::RegSpec for Timer4PwmDcReg_SPEC {
type DataType = u32;
}
#[doc = "Timer pwm dc register"]
pub type Timer4PwmDcReg = crate::RegValueT<Timer4PwmDcReg_SPEC>;
impl Timer4PwmDcReg {
#[doc = "Defines the PWM duty cycle. TIM_PWM_DC / ( TIM_PWM_FREQ+1)"]
#[inline(always)]
pub fn tim_pwm_dc(
self,
) -> crate::common::RegisterField<
0,
0xffff,
1,
0,
u16,
u16,
Timer4PwmDcReg_SPEC,
crate::common::RW,
> {
crate::common::RegisterField::<
0,
0xffff,
1,
0,
u16,
u16,
Timer4PwmDcReg_SPEC,
crate::common::RW,
>::from_register(self, 0)
}
}
impl ::core::default::Default for Timer4PwmDcReg {
#[inline(always)]
fn default() -> Timer4PwmDcReg {
<crate::RegValueT<Timer4PwmDcReg_SPEC> as RegisterValue<_>>::new(0)
}
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Timer4PwmFreqReg_SPEC;
impl crate::sealed::RegSpec for Timer4PwmFreqReg_SPEC {
type DataType = u32;
}
#[doc = "Timer pwm frequency register"]
pub type Timer4PwmFreqReg = crate::RegValueT<Timer4PwmFreqReg_SPEC>;
impl Timer4PwmFreqReg {
#[doc = "Defines the PWM frequency. Timer clock frequency / (TIM_PWM_FREQ+1)\nTimer clock is clock after prescaler"]
#[inline(always)]
pub fn tim_pwm_freq(
self,
) -> crate::common::RegisterField<
0,
0xffff,
1,
0,
u16,
u16,
Timer4PwmFreqReg_SPEC,
crate::common::RW,
> {
crate::common::RegisterField::<
0,
0xffff,
1,
0,
u16,
u16,
Timer4PwmFreqReg_SPEC,
crate::common::RW,
>::from_register(self, 0)
}
}
impl ::core::default::Default for Timer4PwmFreqReg {
#[inline(always)]
fn default() -> Timer4PwmFreqReg {
<crate::RegValueT<Timer4PwmFreqReg_SPEC> as RegisterValue<_>>::new(0)
}
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Timer4ReloadReg_SPEC;
impl crate::sealed::RegSpec for Timer4ReloadReg_SPEC {
type DataType = u32;
}
#[doc = "Timer reload value and Delay in shot mode"]
pub type Timer4ReloadReg = crate::RegValueT<Timer4ReloadReg_SPEC>;
impl Timer4ReloadReg {
#[doc = "Reload or max value in timer mode. Actual delay is the register value plus synchronization time (3 clock cycles)"]
#[inline(always)]
pub fn tim_reload(
self,
) -> crate::common::RegisterField<
0,
0xffffff,
1,
0,
u32,
u32,
Timer4ReloadReg_SPEC,
crate::common::RW,
> {
crate::common::RegisterField::<
0,
0xffffff,
1,
0,
u32,
u32,
Timer4ReloadReg_SPEC,
crate::common::RW,
>::from_register(self, 0)
}
}
impl ::core::default::Default for Timer4ReloadReg {
#[inline(always)]
fn default() -> Timer4ReloadReg {
<crate::RegValueT<Timer4ReloadReg_SPEC> as RegisterValue<_>>::new(0)
}
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Timer4StatusReg_SPEC;
impl crate::sealed::RegSpec for Timer4StatusReg_SPEC {
type DataType = u32;
}
#[doc = "Timer status register"]
pub type Timer4StatusReg = crate::RegValueT<Timer4StatusReg_SPEC>;
impl Timer4StatusReg {
#[doc = "OneShot phase\n0 = Wait for event\n1 = Delay phase\n2 = Start Shot\n3 = Shot phase"]
#[inline(always)]
pub fn tim_oneshot_phase(
self,
) -> crate::common::RegisterField<2, 0x3, 1, 0, u8, u8, Timer4StatusReg_SPEC, crate::common::R>
{
crate::common::RegisterField::<2,0x3,1,0,u8,u8,Timer4StatusReg_SPEC,crate::common::R>::from_register(self,0)
}
#[doc = "Gives the logic level of the IN1"]
#[inline(always)]
pub fn tim_in2_state(
self,
) -> crate::common::RegisterFieldBool<1, 1, 0, Timer4StatusReg_SPEC, crate::common::R> {
crate::common::RegisterFieldBool::<1,1,0,Timer4StatusReg_SPEC,crate::common::R>::from_register(self,0)
}
#[doc = "Gives the logic level of the IN2"]
#[inline(always)]
pub fn tim_in1_state(
self,
) -> crate::common::RegisterFieldBool<0, 1, 0, Timer4StatusReg_SPEC, crate::common::R> {
crate::common::RegisterFieldBool::<0,1,0,Timer4StatusReg_SPEC,crate::common::R>::from_register(self,0)
}
}
impl ::core::default::Default for Timer4StatusReg {
#[inline(always)]
fn default() -> Timer4StatusReg {
<crate::RegValueT<Timer4StatusReg_SPEC> as RegisterValue<_>>::new(0)
}
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Timer4TimerValReg_SPEC;
impl crate::sealed::RegSpec for Timer4TimerValReg_SPEC {
type DataType = u32;
}
#[doc = "Timer counter value"]
pub type Timer4TimerValReg = crate::RegValueT<Timer4TimerValReg_SPEC>;
impl Timer4TimerValReg {
#[doc = "Gives the current timer value"]
#[inline(always)]
pub fn tim_timer_value(
self,
) -> crate::common::RegisterField<
0,
0xffffff,
1,
0,
u32,
u32,
Timer4TimerValReg_SPEC,
crate::common::R,
> {
crate::common::RegisterField::<
0,
0xffffff,
1,
0,
u32,
u32,
Timer4TimerValReg_SPEC,
crate::common::R,
>::from_register(self, 0)
}
}
impl ::core::default::Default for Timer4TimerValReg {
#[inline(always)]
fn default() -> Timer4TimerValReg {
<crate::RegValueT<Timer4TimerValReg_SPEC> as RegisterValue<_>>::new(0)
}
}