Struct stm32l4_stm32hal::R[−][src]

pub struct R<U, T> { /* fields omitted */ }
Expand description

Register/field reader

Result of the read method of a register. Also it can be used in the modify method

Implementations

Read raw bits from register/field

Value of the field as raw bits

Returns true if the bit is clear (0)

Returns true if the bit is set (1)

Bit 0 - DAC channel1 enable

Bit 2 - DAC channel1 trigger enable

Bits 3:5 - DAC channel1 trigger selection

Bits 6:7 - DAC channel1 noise/triangle wave generation enable

Bits 8:11 - DAC channel1 mask/amplitude selector

Bit 12 - DAC channel1 DMA enable

Bit 13 - DAC channel1 DMA Underrun Interrupt enable

Bit 14 - DAC Channel 1 calibration enable

Bit 16 - DAC channel2 enable

Bit 18 - DAC channel2 trigger enable

Bits 19:21 - DAC channel2 trigger selection

Bits 22:23 - DAC channel2 noise/triangle wave generation enable

Bits 24:27 - DAC channel2 mask/amplitude selector

Bit 28 - DAC channel2 DMA enable

Bit 29 - DAC channel2 DMA underrun interrupt enable

Bit 30 - DAC Channel 2 calibration enable

Bits 0:11 - DAC channel1 12-bit right-aligned data

Bits 4:15 - DAC channel1 12-bit left-aligned data

Bits 0:7 - DAC channel1 8-bit right-aligned data

Bits 0:11 - DAC channel2 12-bit right-aligned data

Bits 4:15 - DAC channel2 12-bit left-aligned data

Bits 0:7 - DAC channel2 8-bit right-aligned data

Bits 0:11 - DAC channel1 12-bit right-aligned data

Bits 16:27 - DAC channel2 12-bit right-aligned data

Bits 4:15 - DAC channel1 12-bit left-aligned data

Bits 20:31 - DAC channel2 12-bit left-aligned data

Bits 0:7 - DAC channel1 8-bit right-aligned data

Bits 8:15 - DAC channel2 8-bit right-aligned data

Bits 0:11 - DAC channel1 data output

Bits 0:11 - DAC channel2 data output

Bit 13 - DAC channel1 DMA underrun flag

Bit 14 - DAC Channel 1 calibration offset status

Bit 15 - DAC Channel 1 busy writing sample time flag

Bit 29 - DAC channel2 DMA underrun flag

Bit 30 - DAC Channel 2 calibration offset status

Bit 31 - DAC Channel 2 busy writing sample time flag

Bits 0:4 - DAC Channel 1 offset trimming value

Bits 16:20 - DAC Channel 2 offset trimming value

Bits 0:2 - DAC Channel 1 mode

Bits 16:18 - DAC Channel 2 mode

Bits 0:9 - DAC Channel 1 sample Time

Bits 0:9 - DAC Channel 2 sample Time

Bits 0:9 - DAC Channel 1 hold Time

Bits 16:25 - DAC Channel 2 hold time

Bits 0:7 - DAC Channel 1 refresh Time

Bits 16:23 - DAC Channel 2 refresh Time

Get enumerated values variant

Checks if the value of the field is NOERROR

Checks if the value of the field is ERROR

Get enumerated values variant

Checks if the value of the field is NOTHALF

Checks if the value of the field is HALF

Get enumerated values variant

Checks if the value of the field is NOTCOMPLETE

Checks if the value of the field is COMPLETE

Get enumerated values variant

Checks if the value of the field is NOEVENT

Checks if the value of the field is EVENT

Bit 27 - Channel x transfer error flag (x = 1 ..7)

Bit 26 - Channel x half transfer flag (x = 1 ..7)

Bit 25 - Channel x transfer complete flag (x = 1 ..7)

Bit 24 - Channel x global interrupt flag (x = 1 ..7)

Bit 23 - Channel x transfer error flag (x = 1 ..7)

Bit 22 - Channel x half transfer flag (x = 1 ..7)

Bit 21 - Channel x transfer complete flag (x = 1 ..7)

Bit 20 - Channel x global interrupt flag (x = 1 ..7)

Bit 19 - Channel x transfer error flag (x = 1 ..7)

Bit 18 - Channel x half transfer flag (x = 1 ..7)

Bit 17 - Channel x transfer complete flag (x = 1 ..7)

Bit 16 - Channel x global interrupt flag (x = 1 ..7)

Bit 15 - Channel x transfer error flag (x = 1 ..7)

Bit 14 - Channel x half transfer flag (x = 1 ..7)

Bit 13 - Channel x transfer complete flag (x = 1 ..7)

Bit 12 - Channel x global interrupt flag (x = 1 ..7)

Bit 11 - Channel x transfer error flag (x = 1 ..7)

Bit 10 - Channel x half transfer flag (x = 1 ..7)

Bit 9 - Channel x transfer complete flag (x = 1 ..7)

Bit 8 - Channel x global interrupt flag (x = 1 ..7)

Bit 7 - Channel x transfer error flag (x = 1 ..7)

Bit 6 - Channel x half transfer flag (x = 1 ..7)

Bit 5 - Channel x transfer complete flag (x = 1 ..7)

Bit 4 - Channel x global interrupt flag (x = 1 ..7)

Bit 3 - Channel x transfer error flag (x = 1 ..7)

Bit 2 - Channel x half transfer flag (x = 1 ..7)

Bit 1 - Channel x transfer complete flag (x = 1 ..7)

Bit 0 - Channel x global interrupt flag (x = 1 ..7)

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is MEDIUM

Checks if the value of the field is HIGH

Checks if the value of the field is VERYHIGH

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is FROMPERIPHERAL

Checks if the value of the field is FROMMEMORY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Memory to memory mode

Bits 12:13 - Channel priority level

Bits 10:11 - Memory size

Bits 8:9 - Peripheral size

Bit 7 - Memory increment mode

Bit 6 - Peripheral increment mode

Bit 5 - Circular mode

Bit 4 - Data transfer direction

Bit 3 - Transfer error interrupt enable

Bit 2 - Half transfer interrupt enable

Bit 1 - Transfer complete interrupt enable

Bit 0 - Channel enable

Bits 0:15 - Number of data to transfer

Bits 0:31 - Peripheral address

Bits 0:31 - Memory address

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is MEDIUM

Checks if the value of the field is HIGH

Checks if the value of the field is VERYHIGH

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is FROMPERIPHERAL

Checks if the value of the field is FROMMEMORY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Memory to memory mode

Bits 12:13 - Channel priority level

Bits 10:11 - Memory size

Bits 8:9 - Peripheral size

Bit 7 - Memory increment mode

Bit 6 - Peripheral increment mode

Bit 5 - Circular mode

Bit 4 - Data transfer direction

Bit 3 - Transfer error interrupt enable

Bit 2 - Half transfer interrupt enable

Bit 1 - Transfer complete interrupt enable

Bit 0 - Channel enable

Bits 0:15 - Number of data to transfer

Bits 0:31 - Peripheral address

Bits 0:31 - Memory address

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is MEDIUM

Checks if the value of the field is HIGH

Checks if the value of the field is VERYHIGH

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is FROMPERIPHERAL

Checks if the value of the field is FROMMEMORY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Memory to memory mode

Bits 12:13 - Channel priority level

Bits 10:11 - Memory size

Bits 8:9 - Peripheral size

Bit 7 - Memory increment mode

Bit 6 - Peripheral increment mode

Bit 5 - Circular mode

Bit 4 - Data transfer direction

Bit 3 - Transfer error interrupt enable

Bit 2 - Half transfer interrupt enable

Bit 1 - Transfer complete interrupt enable

Bit 0 - Channel enable

Bits 0:15 - Number of data to transfer

Bits 0:31 - Peripheral address

Bits 0:31 - Memory address

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is MEDIUM

Checks if the value of the field is HIGH

Checks if the value of the field is VERYHIGH

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is FROMPERIPHERAL

Checks if the value of the field is FROMMEMORY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Memory to memory mode

Bits 12:13 - Channel priority level

Bits 10:11 - Memory size

Bits 8:9 - Peripheral size

Bit 7 - Memory increment mode

Bit 6 - Peripheral increment mode

Bit 5 - Circular mode

Bit 4 - Data transfer direction

Bit 3 - Transfer error interrupt enable

Bit 2 - Half transfer interrupt enable

Bit 1 - Transfer complete interrupt enable

Bit 0 - Channel enable

Bits 0:15 - Number of data to transfer

Bits 0:31 - Peripheral address

Bits 0:31 - Memory address

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is MEDIUM

Checks if the value of the field is HIGH

Checks if the value of the field is VERYHIGH

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is FROMPERIPHERAL

Checks if the value of the field is FROMMEMORY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Memory to memory mode

Bits 12:13 - Channel priority level

Bits 10:11 - Memory size

Bits 8:9 - Peripheral size

Bit 7 - Memory increment mode

Bit 6 - Peripheral increment mode

Bit 5 - Circular mode

Bit 4 - Data transfer direction

Bit 3 - Transfer error interrupt enable

Bit 2 - Half transfer interrupt enable

Bit 1 - Transfer complete interrupt enable

Bit 0 - Channel enable

Bits 0:15 - Number of data to transfer

Bits 0:31 - Peripheral address

Bits 0:31 - Memory address

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is MEDIUM

Checks if the value of the field is HIGH

Checks if the value of the field is VERYHIGH

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is FROMPERIPHERAL

Checks if the value of the field is FROMMEMORY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Memory to memory mode

Bits 12:13 - Channel priority level

Bits 10:11 - Memory size

Bits 8:9 - Peripheral size

Bit 7 - Memory increment mode

Bit 6 - Peripheral increment mode

Bit 5 - Circular mode

Bit 4 - Data transfer direction

Bit 3 - Transfer error interrupt enable

Bit 2 - Half transfer interrupt enable

Bit 1 - Transfer complete interrupt enable

Bit 0 - Channel enable

Bits 0:15 - Number of data to transfer

Bits 0:31 - Peripheral address

Bits 0:31 - Memory address

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is MEDIUM

Checks if the value of the field is HIGH

Checks if the value of the field is VERYHIGH

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is FROMPERIPHERAL

Checks if the value of the field is FROMMEMORY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Memory to memory mode

Bits 12:13 - Channel priority level

Bits 10:11 - Memory size

Bits 8:9 - Peripheral size

Bit 7 - Memory increment mode

Bit 6 - Peripheral increment mode

Bit 5 - Circular mode

Bit 4 - Data transfer direction

Bit 3 - Transfer error interrupt enable

Bit 2 - Half transfer interrupt enable

Bit 1 - Transfer complete interrupt enable

Bit 0 - Channel enable

Bits 0:15 - Number of data to transfer

Bits 0:31 - Peripheral address

Bits 0:31 - Memory address

Get enumerated values variant

Checks if the value of the field is NOMAPPING

Checks if the value of the field is MAP1

Checks if the value of the field is MAP2

Checks if the value of the field is MAP3

Checks if the value of the field is MAP4

Checks if the value of the field is MAP5

Checks if the value of the field is MAP6

Checks if the value of the field is MAP7

Checks if the value of the field is MAP8

Checks if the value of the field is MAP9

Checks if the value of the field is MAP10

Checks if the value of the field is MAP11

Checks if the value of the field is MAP12

Checks if the value of the field is MAP13

Checks if the value of the field is MAP14

Checks if the value of the field is MAP15

Bits 24:27 - DMA channel 7 selection

Bits 20:23 - DMA channel 6 selection

Bits 16:19 - DMA channel 5 selection

Bits 12:15 - DMA channel 4 selection

Bits 8:11 - DMA channel 3 selection

Bits 4:7 - DMA channel 2 selection

Bits 0:3 - DMA channel 1 selection

Bits 0:31 - Data register bits

Bits 0:7 - General-purpose 8-bit data register bits

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is REVERSED

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is BYTE

Checks if the value of the field is HALFWORD

Checks if the value of the field is WORD

Get enumerated values variant

Checks if the value of the field is POLYSIZE32

Checks if the value of the field is POLYSIZE16

Checks if the value of the field is POLYSIZE8

Checks if the value of the field is POLYSIZE7

Bit 7 - Reverse output data

Bits 5:6 - Reverse input data

Bits 3:4 - Polynomial size

Bits 0:31 - Programmable initial CRC value

Bits 0:31 - Programmable polynomial

Bits 0:7 - Data register bits

Bits 0:15 - Data register bits

Bits 5:6 - Bias selector

Bits 2:4 - Duty selection

Bit 1 - Voltage source selection

Bit 0 - LCD controller enable

Bit 7 - Mux segment enable

Bit 8 - Voltage output buffer enable

Bits 22:25 - PS 16-bit prescaler

Bits 18:21 - DIV clock divider

Bits 16:17 - Blink mode selection

Bits 13:15 - Blink frequency selection

Bits 10:12 - Contrast control

Bits 7:9 - Dead time duration

Bits 4:6 - Pulse ON duration

Bit 3 - Update display done interrupt enable

Bit 1 - Start of frame interrupt enable

Bit 0 - High drive enable

Bit 5 - LCD Frame Control Register Synchronization flag

Bit 4 - Ready flag

Bit 3 - Update Display Done

Bit 1 - Start of frame flag

Bit 0 - ENS

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bit 31 - S31

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bit 31 - S31

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bit 31 - S31

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bit 31 - S31

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bit 31 - S31

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bit 31 - S31

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bit 31 - S31

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bits 28:31 - Charge transfer pulse high

Bits 24:27 - Charge transfer pulse low

Bits 17:23 - Spread spectrum deviation

Bit 16 - Spread spectrum enable

Bit 15 - Spread spectrum prescaler

Bits 12:14 - pulse generator prescaler

Bits 5:7 - Max count value

Bit 4 - I/O Default mode

Bit 3 - Synchronization pin polarity

Bit 2 - Acquisition mode

Bit 1 - Start a new acquisition

Bit 0 - Touch sensing controller enable

Bit 1 - Max count error interrupt enable

Bit 0 - End of acquisition interrupt enable

Bit 1 - Max count error interrupt clear

Bit 0 - End of acquisition interrupt clear

Bit 1 - Max count error flag

Bit 0 - End of acquisition flag

Bit 31 - G8_IO4

Bit 30 - G8_IO3

Bit 29 - G8_IO2

Bit 28 - G8_IO1

Bit 27 - G7_IO4

Bit 26 - G7_IO3

Bit 25 - G7_IO2

Bit 24 - G7_IO1

Bit 23 - G6_IO4

Bit 22 - G6_IO3

Bit 21 - G6_IO2

Bit 20 - G6_IO1

Bit 19 - G5_IO4

Bit 18 - G5_IO3

Bit 17 - G5_IO2

Bit 16 - G5_IO1

Bit 15 - G4_IO4

Bit 14 - G4_IO3

Bit 13 - G4_IO2

Bit 12 - G4_IO1

Bit 11 - G3_IO4

Bit 10 - G3_IO3

Bit 9 - G3_IO2

Bit 8 - G3_IO1

Bit 7 - G2_IO4

Bit 6 - G2_IO3

Bit 5 - G2_IO2

Bit 4 - G2_IO1

Bit 3 - G1_IO4

Bit 2 - G1_IO3

Bit 1 - G1_IO2

Bit 0 - G1_IO1

Bit 31 - G8_IO4

Bit 30 - G8_IO3

Bit 29 - G8_IO2

Bit 28 - G8_IO1

Bit 27 - G7_IO4

Bit 26 - G7_IO3

Bit 25 - G7_IO2

Bit 24 - G7_IO1

Bit 23 - G6_IO4

Bit 22 - G6_IO3

Bit 21 - G6_IO2

Bit 20 - G6_IO1

Bit 19 - G5_IO4

Bit 18 - G5_IO3

Bit 17 - G5_IO2

Bit 16 - G5_IO1

Bit 15 - G4_IO4

Bit 14 - G4_IO3

Bit 13 - G4_IO2

Bit 12 - G4_IO1

Bit 11 - G3_IO4

Bit 10 - G3_IO3

Bit 9 - G3_IO2

Bit 8 - G3_IO1

Bit 7 - G2_IO4

Bit 6 - G2_IO3

Bit 5 - G2_IO2

Bit 4 - G2_IO1

Bit 3 - G1_IO4

Bit 2 - G1_IO3

Bit 1 - G1_IO2

Bit 0 - G1_IO1

Bit 31 - G8_IO4

Bit 30 - G8_IO3

Bit 29 - G8_IO2

Bit 28 - G8_IO1

Bit 27 - G7_IO4

Bit 26 - G7_IO3

Bit 25 - G7_IO2

Bit 24 - G7_IO1

Bit 23 - G6_IO4

Bit 22 - G6_IO3

Bit 21 - G6_IO2

Bit 20 - G6_IO1

Bit 19 - G5_IO4

Bit 18 - G5_IO3

Bit 17 - G5_IO2

Bit 16 - G5_IO1

Bit 15 - G4_IO4

Bit 14 - G4_IO3

Bit 13 - G4_IO2

Bit 12 - G4_IO1

Bit 11 - G3_IO4

Bit 10 - G3_IO3

Bit 9 - G3_IO2

Bit 8 - G3_IO1

Bit 7 - G2_IO4

Bit 6 - G2_IO3

Bit 5 - G2_IO2

Bit 4 - G2_IO1

Bit 3 - G1_IO4

Bit 2 - G1_IO3

Bit 1 - G1_IO2

Bit 0 - G1_IO1

Bit 31 - G8_IO4

Bit 30 - G8_IO3

Bit 29 - G8_IO2

Bit 28 - G8_IO1

Bit 27 - G7_IO4

Bit 26 - G7_IO3

Bit 25 - G7_IO2

Bit 24 - G7_IO1

Bit 23 - G6_IO4

Bit 22 - G6_IO3

Bit 21 - G6_IO2

Bit 20 - G6_IO1

Bit 19 - G5_IO4

Bit 18 - G5_IO3

Bit 17 - G5_IO2

Bit 16 - G5_IO1

Bit 15 - G4_IO4

Bit 14 - G4_IO3

Bit 13 - G4_IO2

Bit 12 - G4_IO1

Bit 11 - G3_IO4

Bit 10 - G3_IO3

Bit 9 - G3_IO2

Bit 8 - G3_IO1

Bit 7 - G2_IO4

Bit 6 - G2_IO3

Bit 5 - G2_IO2

Bit 4 - G2_IO1

Bit 3 - G1_IO4

Bit 2 - G1_IO3

Bit 1 - G1_IO2

Bit 0 - G1_IO1

Bit 23 - Analog I/O group x status

Bit 22 - Analog I/O group x status

Bit 21 - Analog I/O group x status

Bit 20 - Analog I/O group x status

Bit 19 - Analog I/O group x status

Bit 18 - Analog I/O group x status

Bit 17 - Analog I/O group x status

Bit 16 - Analog I/O group x status

Bit 7 - Analog I/O group x enable

Bit 6 - Analog I/O group x enable

Bit 5 - Analog I/O group x enable

Bit 4 - Analog I/O group x enable

Bit 3 - Analog I/O group x enable

Bit 2 - Analog I/O group x enable

Bit 1 - Analog I/O group x enable

Bit 0 - Analog I/O group x enable

Bits 0:13 - Counter value

Get enumerated values variant

Checks if the value of the field is DIVIDEBY4

Checks if the value of the field is DIVIDEBY8

Checks if the value of the field is DIVIDEBY16

Checks if the value of the field is DIVIDEBY32

Checks if the value of the field is DIVIDEBY64

Checks if the value of the field is DIVIDEBY128

Checks if the value of the field is DIVIDEBY256

Checks if the value of the field is DIVIDEBY256BIS

Bits 0:2 - Prescaler divider

Bits 0:11 - Watchdog counter reload value

Bit 2 - Watchdog counter window value update

Bit 1 - Watchdog counter reload value update

Bit 0 - Watchdog prescaler value update

Bits 0:11 - Watchdog counter window value

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 7 - Activation bit

Bits 0:6 - 7-bit counter (MSB to LSB)

Get enumerated values variant

Checks if the value of the field is ENABLE

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Checks if the value of the field is DIV8

Bit 9 - Early wakeup interrupt

Bits 0:6 - 7-bit window value

Bits 7:8 - Timer base

Get enumerated values variant

Checks if the value of the field is PENDING

Checks if the value of the field is FINISHED

Bit 0 - Early wakeup interrupt flag

Bit 0 - Comparator 1 enable bit

Bits 2:3 - Power Mode of the comparator 1

Bits 4:6 - Comparator 1 Input Minus connection configuration bit

Bits 7:8 - Comparator1 input plus selection bit

Bit 15 - Comparator 1 polarity selection bit

Bits 16:17 - Comparator 1 hysteresis selection bits

Bits 18:20 - Comparator 1 blanking source selection bits

Bit 22 - Scaler bridge enable

Bit 23 - Voltage scaler enable bit

Bits 25:26 - comparator 1 input minus extended selection bits

Bit 30 - Comparator 1 output status bit

Bit 0 - Comparator 2 enable bit

Bits 2:3 - Power Mode of the comparator 2

Bits 4:6 - Comparator 2 Input Minus connection configuration bit

Bits 7:8 - Comparator 2 Input Plus connection configuration bit

Bit 9 - Windows mode selection bit

Bit 15 - Comparator 2 polarity selection bit

Bits 16:17 - Comparator 2 hysteresis selection bits

Bits 18:20 - Comparator 2 blanking source selection bits

Bit 22 - Scaler bridge enable

Bit 23 - Voltage scaler enable bit

Bits 25:26 - comparator 2 input minus extended selection bits

Bit 30 - Comparator 2 output status bit

Bits 8:23 - code segment start address

Bits 8:21 - code segment length

Bits 8:23 - Non-volatile data segment start address

Bits 8:21 - Non-volatile data segment length

Bits 6:15 - Volatile data segment start address

Bits 6:15 - Non-volatile data segment length

Bit 2 - Volatile data execution

Bit 1 - Volatile data shared

Bit 0 - Firewall pre alarm

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FILTER1

Checks if the value of the field is FILTER2

Checks if the value of the field is FILTER3

Checks if the value of the field is FILTER4

Checks if the value of the field is FILTER5

Checks if the value of the field is FILTER6

Checks if the value of the field is FILTER7

Checks if the value of the field is FILTER8

Checks if the value of the field is FILTER9

Checks if the value of the field is FILTER10

Checks if the value of the field is FILTER11

Checks if the value of the field is FILTER12

Checks if the value of the field is FILTER13

Checks if the value of the field is FILTER14

Checks if the value of the field is FILTER15

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 0 - Peripheral enable

Bit 1 - TX Interrupt enable

Bit 2 - RX Interrupt enable

Bit 3 - Address match interrupt enable (slave only)

Bit 4 - Not acknowledge received interrupt enable

Bit 5 - STOP detection Interrupt enable

Bit 6 - Transfer Complete interrupt enable

Bit 7 - Error interrupts enable

Bits 8:11 - Digital noise filter

Bit 12 - Analog noise filter OFF

Bit 14 - DMA transmission requests enable

Bit 15 - DMA reception requests enable

Bit 16 - Slave byte control

Bit 17 - Clock stretching disable

Bit 18 - Wakeup from STOP enable

Bit 19 - General call enable

Bit 20 - SMBus Host address enable

Bit 21 - SMBus Device Default address enable

Bit 22 - SMBUS alert enable

Bit 23 - PEC enable

Get enumerated values variant

Checks if the value of the field is NOPEC

Checks if the value of the field is PEC

Get enumerated values variant

Checks if the value of the field is SOFTWARE

Checks if the value of the field is AUTOMATIC

Get enumerated values variant

Checks if the value of the field is COMPLETED

Checks if the value of the field is NOTCOMPLETED

Get enumerated values variant

Checks if the value of the field is ACK

Checks if the value of the field is NACK

Get enumerated values variant

Checks if the value of the field is NOSTOP

Checks if the value of the field is STOP

Get enumerated values variant

Checks if the value of the field is NOSTART

Checks if the value of the field is START

Get enumerated values variant

Checks if the value of the field is COMPLETE

Checks if the value of the field is PARTIAL

Get enumerated values variant

Checks if the value of the field is BIT7

Checks if the value of the field is BIT10

Get enumerated values variant

Checks if the value of the field is WRITE

Checks if the value of the field is READ

Bit 26 - Packet error checking byte

Bit 25 - Automatic end mode (master mode)

Bit 24 - NBYTES reload mode

Bits 16:23 - Number of bytes

Bit 15 - NACK generation (slave mode)

Bit 14 - Stop generation (master mode)

Bit 13 - Start generation

Bit 12 - 10-bit address header only read direction (master receiver mode)

Bit 11 - 10-bit addressing mode (master mode)

Bit 10 - Transfer direction (master mode)

Bits 0:9 - Slave address bit (master mode)

Get enumerated values variant

Checks if the value of the field is BIT7

Checks if the value of the field is BIT10

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bits 0:9 - Interface address

Bit 10 - Own Address 1 10-bit mode

Bit 15 - Own Address 1 enable

Get enumerated values variant

Checks if the value of the field is NOMASK

Checks if the value of the field is MASK1

Checks if the value of the field is MASK2

Checks if the value of the field is MASK3

Checks if the value of the field is MASK4

Checks if the value of the field is MASK5

Checks if the value of the field is MASK6

Checks if the value of the field is MASK7

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bits 1:7 - Interface address

Bits 8:10 - Own Address 2 masks

Bit 15 - Own Address 2 enable

Bits 0:7 - SCL low period (master mode)

Bits 8:15 - SCL high period (master mode)

Bits 16:19 - Data hold time

Bits 20:23 - Data setup time

Bits 28:31 - Timing prescaler

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bits 0:11 - Bus timeout A

Bit 12 - Idle clock timeout detection

Bit 15 - Clock timeout enable

Bits 16:27 - Bus timeout B

Bit 31 - Extended clock timeout enable

Get enumerated values variant

Checks if the value of the field is WRITE

Checks if the value of the field is READ

Get enumerated values variant

Checks if the value of the field is NOTBUSY

Checks if the value of the field is BUSY

Get enumerated values variant

Checks if the value of the field is NOALERT

Checks if the value of the field is ALERT

Get enumerated values variant

Checks if the value of the field is NOTIMEOUT

Checks if the value of the field is TIMEOUT

Get enumerated values variant

[src]
pub fn is_match_(&self) -> bool

Checks if the value of the field is MATCH

Checks if the value of the field is NOMATCH

Get enumerated values variant

Checks if the value of the field is NOOVERRUN

Checks if the value of the field is OVERRUN

Get enumerated values variant

Checks if the value of the field is NOTLOST

Checks if the value of the field is LOST

Get enumerated values variant

Checks if the value of the field is NOERROR

Checks if the value of the field is ERROR

Get enumerated values variant

Checks if the value of the field is NOTCOMPLETE

Checks if the value of the field is COMPLETE

Get enumerated values variant

Checks if the value of the field is NOTCOMPLETE

Checks if the value of the field is COMPLETE

Get enumerated values variant

Checks if the value of the field is NOSTOP

Checks if the value of the field is STOP

Get enumerated values variant

Checks if the value of the field is NONACK

Checks if the value of the field is NACK

Get enumerated values variant

Checks if the value of the field is NOTMATCH

[src]
pub fn is_match_(&self) -> bool

Checks if the value of the field is MATCH

Get enumerated values variant

Checks if the value of the field is EMPTY

Checks if the value of the field is NOTEMPTY

Get enumerated values variant

Checks if the value of the field is NOTEMPTY

Checks if the value of the field is EMPTY

Get enumerated values variant

Checks if the value of the field is NOTEMPTY

Checks if the value of the field is EMPTY

Bits 17:23 - Address match code (Slave mode)

Bit 16 - Transfer direction (Slave mode)

Bit 15 - Bus busy

Bit 13 - SMBus alert

Bit 12 - Timeout or t_low detection flag

Bit 11 - PEC Error in reception

Bit 10 - Overrun/Underrun (slave mode)

Bit 9 - Arbitration lost

Bit 8 - Bus error

Bit 7 - Transfer Complete Reload

Bit 6 - Transfer Complete (master mode)

Bit 5 - Stop detection flag

Bit 4 - Not acknowledge received flag

Bit 3 - Address matched (slave mode)

Bit 2 - Receive data register not empty (receivers)

Bit 1 - Transmit interrupt status (transmitters)

Bit 0 - Transmit data register empty (transmitters)

Bits 0:7 - Packet error checking register

Bits 0:7 - 8-bit receive data

Bits 0:7 - 8-bit transmit data

Bits 0:2 - Latency

Bit 8 - Prefetch enable

Bit 9 - Instruction cache enable

Bit 10 - Data cache enable

Bit 11 - Instruction cache reset

Bit 12 - Data cache reset

Bit 13 - Flash Power-down mode during Low-power run mode

Bit 14 - Flash Power-down mode during Low-power sleep mode

Bit 0 - End of operation

Bit 1 - Operation error

Bit 3 - Programming error

Bit 4 - Write protected error

Bit 5 - Programming alignment error

Bit 6 - Size error

Bit 7 - Programming sequence error

Bit 8 - Fast programming data miss error

Bit 9 - Fast programming error

Bit 14 - PCROP read error

Bit 15 - Option validity error

Bit 16 - Busy

Bit 0 - Programming

Bit 1 - Page erase

Bit 2 - Bank 1 Mass erase

Bits 3:10 - Page number

Bit 11 - Bank erase

Bit 15 - Bank 2 Mass erase

Bit 16 - Start

Bit 17 - Options modification start

Bit 18 - Fast programming

Bit 24 - End of operation interrupt enable

Bit 25 - Error interrupt enable

Bit 26 - PCROP read error interrupt enable

Bit 27 - Force the option byte loading

Bit 30 - Options Lock

Bit 31 - FLASH_CR Lock

Bits 0:18 - ECC fail address

Bit 19 - ECC fail bank

Bit 20 - System Flash ECC fail

Bit 24 - ECC correction interrupt enable

Bit 30 - ECC correction

Bit 31 - ECC detection

Bits 0:7 - Read protection level

Bits 8:10 - BOR reset Level

Bit 12 - nRST_STOP

Bit 13 - nRST_STDBY

Bit 16 - Independent watchdog selection

Bit 17 - Independent watchdog counter freeze in Stop mode

Bit 18 - Independent watchdog counter freeze in Standby mode

Bit 19 - Window watchdog selection

Bit 20 - Dual-bank boot

Bit 21 - Dual-Bank on 512 KB or 256 KB Flash memory devices

Bit 23 - Boot configuration

Bit 24 - SRAM2 parity check enable

Bit 25 - SRAM2 Erase when system reset

Bit 26 - Software BOOT0

Bit 27 - nBOOT0 option bit

Bits 0:15 - Bank 1 PCROP area start offset

Bits 0:15 - Bank 1 PCROP area end offset

Bit 31 - PCROP area preserved when RDP level decreased

Bits 0:7 - Bank 1 WRP first area tart offset

Bits 16:23 - Bank 1 WRP first area A end offset

Bits 16:23 - Bank 1 WRP second area B end offset

Bits 0:7 - Bank 1 WRP second area B start offset

Bits 0:15 - Bank 2 PCROP area start offset

Bits 0:15 - Bank 2 PCROP area end offset

Bits 0:7 - Bank 2 WRP first area A start offset

Bits 16:23 - Bank 2 WRP first area A end offset

Bits 0:7 - Bank 2 WRP second area B start offset

Bits 16:23 - Bank 2 WRP second area B end offset

Get enumerated values variant

Checks if the value of the field is RANGE100K

Checks if the value of the field is RANGE200K

Checks if the value of the field is RANGE400K

Checks if the value of the field is RANGE800K

Checks if the value of the field is RANGE1M

Checks if the value of the field is RANGE2M

Checks if the value of the field is RANGE4M

Checks if the value of the field is RANGE8M

Checks if the value of the field is RANGE16M

Checks if the value of the field is RANGE24M

Checks if the value of the field is RANGE32M

Checks if the value of the field is RANGE48M

Bit 27 - SAI1 PLL clock ready flag

Bit 26 - SAI1 PLL enable

Bit 25 - Main PLL clock ready flag

Bit 24 - Main PLL enable

Bit 18 - HSE crystal oscillator bypass

Bit 17 - HSE clock ready flag

Bit 16 - HSE clock enable

Bit 11 - HSI automatic start from Stop

Bit 10 - HSI clock ready flag

Bit 9 - HSI always enable for peripheral kernels

Bit 8 - HSI clock enable

Bits 4:7 - MSI clock ranges

Bit 2 - MSI clock PLL enable

Bit 1 - MSI clock ready flag

Bit 0 - MSI clock enable

Bits 24:28 - HSI clock trimming

Bits 16:23 - HSI clock calibration

Bits 8:15 - MSI clock trimming

Bits 0:7 - MSI clock calibration

Bits 28:30 - Microcontroller clock output prescaler

Bits 24:26 - Microcontroller clock output

Bit 15 - Wakeup from Stop and CSS backup clock selection

Bits 11:13 - APB high-speed prescaler (APB2)

Bits 8:10 - PB low-speed prescaler (APB1)

Bits 4:7 - AHB prescaler

Bits 2:3 - System clock switch status

Bits 0:1 - System clock switch

Bits 25:26 - Main PLL division factor for PLLCLK (system clock)

Bit 24 - Main PLL PLLCLK output enable

Bits 21:22 - Main PLL division factor for PLLUSB1CLK(48 MHz clock)

Bit 20 - Main PLL PLLUSB1CLK output enable

Bit 17 - Main PLL division factor for PLLSAI3CLK (SAI1 and SAI2 clock)

Bit 16 - Main PLL PLLSAI3CLK output enable

Bits 8:14 - Main PLL multiplication factor for VCO

Bits 4:6 - Division factor for the main PLL and audio PLL (PLLSAI1 and PLLSAI2) input clock

Bits 0:1 - Main PLL, PLLSAI1 and PLLSAI2 entry clock source

Bits 27:31 - Main PLL division factor for PLLSAI2CLK

Bits 25:26 - PLLSAI1 division factor for PLLADC1CLK (ADC clock)

Bit 24 - PLLSAI1 PLLADC1CLK output enable

Bits 21:22 - SAI1PLL division factor for PLLUSB2CLK (48 MHz clock)

Bit 20 - SAI1PLL PLLUSB2CLK output enable

Bit 17 - SAI1PLL division factor for PLLSAI1CLK (SAI1 or SAI2 clock)

Bit 16 - SAI1PLL PLLSAI1CLK output enable

Bits 8:14 - SAI1PLL multiplication factor for VCO

Bits 27:31 - PLLSAI1 division factor for PLLSAI1CLK

Bit 9 - LSE clock security system interrupt enable

Bit 6 - PLLSAI1 ready interrupt enable

Bit 5 - PLL ready interrupt enable

Bit 4 - HSE ready interrupt enable

Bit 3 - HSI ready interrupt enable

Bit 2 - MSI ready interrupt enable

Bit 1 - LSE ready interrupt enable

Bit 0 - LSI ready interrupt enable

Bit 10 - HSI48 ready interrupt enable

Bit 9 - LSE Clock security system interrupt flag

Bit 8 - Clock security system interrupt flag

Bit 6 - PLLSAI1 ready interrupt flag

Bit 5 - PLL ready interrupt flag

Bit 4 - HSE ready interrupt flag

Bit 3 - HSI ready interrupt flag

Bit 2 - MSI ready interrupt flag

Bit 1 - LSE ready interrupt flag

Bit 0 - LSI ready interrupt flag

Bit 10 - HSI48 ready interrupt flag

Bit 16 - Touch Sensing Controller reset

Bit 11 - CRC reset

Bit 8 - Flash memory interface reset

Bit 1 - DMA2 reset

Bit 0 - DMA1 reset

Bit 18 - Random number generator reset

Bit 16 - AES hardware accelerator reset

Bit 13 - ADC reset

Bit 7 - IO port H reset

Bit 4 - IO port E reset

Bit 3 - IO port D reset

Bit 2 - IO port C reset

Bit 1 - IO port B reset

Bit 0 - IO port A reset

Bit 8 - Quad SPI memory interface reset

Bit 31 - Low Power Timer 1 reset

Bit 30 - OPAMP interface reset

Bit 29 - DAC1 interface reset

Bit 28 - Power interface reset

Bit 25 - CAN1 reset

Bit 23 - I2C3 reset

Bit 21 - I2C1 reset

Bit 18 - USART3 reset

Bit 17 - USART2 reset

Bit 15 - SPI3 reset

Bit 14 - SPI2 reset

Bit 9 - LCD interface reset

Bit 5 - TIM7 timer reset

Bit 4 - TIM6 timer reset

Bit 0 - TIM2 timer reset

Bit 19 - USART4 reset.

Bit 22 - I2C2 reset

Bit 24 - CRS reset

Bit 26 - USB FS reset

Bit 5 - Low-power timer 2 reset

Bit 2 - Single wire protocol reset

Bit 0 - Low-power UART 1 reset

Bit 1 - I2C4 reset

Bit 21 - Serial audio interface 1 (SAI1) reset

Bit 17 - TIM16 timer reset

Bit 16 - TIM15 timer reset

Bit 14 - USART1 reset

Bit 12 - SPI1 reset

Bit 11 - TIM1 timer reset

Bit 10 - SDMMC reset

Bit 0 - System configuration (SYSCFG) reset

Bit 24 - DFSDM filter reset

Bit 16 - Touch Sensing Controller clock enable

Bit 12 - CRC clock enable

Bit 8 - Flash memory interface clock enable

Bit 1 - DMA2 clock enable

Bit 0 - DMA1 clock enable

Bit 18 - Random Number Generator clock enable

Bit 16 - AES accelerator clock enable

Bit 13 - ADC clock enable

Bit 7 - IO port H clock enable

Bit 4 - IO port E clock enable

Bit 3 - IO port D clock enable

Bit 2 - IO port C clock enable

Bit 1 - IO port B clock enable

Bit 0 - IO port A clock enable

Bit 8 - QSPIEN

Bit 31 - Low power timer 1 clock enable

Bit 30 - OPAMP interface clock enable

Bit 29 - DAC1 interface clock enable

Bit 28 - Power interface clock enable

Bit 25 - CAN1 clock enable

Bit 23 - I2C3 clock enable

Bit 21 - I2C1 clock enable

Bit 18 - USART1 clock enable

Bit 17 - USART2 clock enable

Bit 15 - SPI3 clock enable

Bit 14 - SPI peripheral 2 clock enable

Bit 11 - Window watchdog clock enable

Bit 9 - LCD clock enable

Bit 5 - TIM7 timer clock enable

Bit 4 - TIM6 timer clock enable

Bit 0 - TIM2 timer clock enable

Bit 10 - RTC APB clock enable

Bit 24 - CRS clock enable

Bit 26 - USB FS clock enable

Bit 1 - TIM3 timer clock enable

Bit 19 - UART4 clock enable

Bit 22 - I2C2 clock enable

Bit 5 - LPTIM2EN

Bit 2 - Single wire protocol clock enable

Bit 0 - Low power UART 1 clock enable

Bit 24 - DFSDMEN enable

Bit 1 - I2C4 clock enable

Bit 21 - SAI1 clock enable

Bit 17 - TIM16 timer clock enable

Bit 16 - TIM15 timer clock enable

Bit 14 - USART1clock enable

Bit 12 - SPI1 clock enable

Bit 11 - TIM1 timer clock enable

Bit 10 - SDMMC clock enable

Bit 7 - Firewall clock enable

Bit 0 - SYSCFG clock enable

Bit 16 - Touch Sensing Controller clocks enable during Sleep and Stop modes

Bit 12 - CRCSMEN

Bit 9 - SRAM1 interface clocks enable during Sleep and Stop modes

Bit 8 - Flash memory interface clocks enable during Sleep and Stop modes

Bit 1 - DMA2 clocks enable during Sleep and Stop modes

Bit 0 - DMA1 clocks enable during Sleep and Stop modes

Bit 18 - Random Number Generator clocks enable during Sleep and Stop modes

Bit 16 - AES accelerator clocks enable during Sleep and Stop modes

Bit 13 - ADC clocks enable during Sleep and Stop modes

Bit 9 - SRAM2 interface clocks enable during Sleep and Stop modes

Bit 7 - IO port H clocks enable during Sleep and Stop modes

Bit 4 - IO port E clocks enable during Sleep and Stop modes

Bit 3 - IO port D clocks enable during Sleep and Stop modes

Bit 2 - IO port C clocks enable during Sleep and Stop modes

Bit 1 - IO port B clocks enable during Sleep and Stop modes

Bit 0 - IO port A clocks enable during Sleep and Stop modes

Bit 8 - QSPISMEN

Bit 31 - Low power timer 1 clocks enable during Sleep and Stop modes

Bit 30 - OPAMP interface clocks enable during Sleep and Stop modes

Bit 29 - DAC1 interface clocks enable during Sleep and Stop modes

Bit 28 - Power interface clocks enable during Sleep and Stop modes

Bit 25 - CAN1 clocks enable during Sleep and Stop modes

Bit 23 - I2C3 clocks enable during Sleep and Stop modes

Bit 21 - I2C1 clocks enable during Sleep and Stop modes

Bit 18 - USART2 clocks enable during Sleep and Stop modes

Bit 17 - USART1 clocks enable during Sleep and Stop modes

Bit 15 - SPI3 clocks enable during Sleep and Stop modes

Bit 14 - SPI2 clocks enable during Sleep and Stop modes

Bit 11 - Window watchdog clocks enable during Sleep and Stop modes

Bit 9 - LCD clocks enable during Sleep and Stop modes

Bit 5 - TIM7 timer clocks enable during Sleep and Stop modes

Bit 4 - TIM6 timer clocks enable during Sleep and Stop modes

Bit 0 - TIM2 timer clocks enable during Sleep and Stop modes

Bit 10 - RTC APB clock enable during Sleep and Stop modes

Bit 26 - USB FS clock enable during Sleep and Stop modes

Bit 22 - I2C2 clocks enable during Sleep and Stop modes

Bit 24 - CRS clock enable during Sleep and Stop modes

Bit 5 - LPTIM2SMEN

Bit 2 - Single wire protocol clocks enable during Sleep and Stop modes

Bit 0 - Low power UART 1 clocks enable during Sleep and Stop modes

Bit 21 - SAI1 clocks enable during Sleep and Stop modes

Bit 17 - TIM16 timer clocks enable during Sleep and Stop modes

Bit 16 - TIM15 timer clocks enable during Sleep and Stop modes

Bit 14 - USART1clocks enable during Sleep and Stop modes

Bit 12 - SPI1 clocks enable during Sleep and Stop modes

Bit 11 - TIM1 timer clocks enable during Sleep and Stop modes

Bit 10 - SDMMC clocks enable during Sleep and Stop modes

Bit 0 - SYSCFG clocks enable during Sleep and Stop modes

Bit 30 - SWPMI1 clock source selection

Bits 28:29 - ADCs clock source selection

Bits 26:27 - 48 MHz clock source selection

Bits 22:23 - SAI1 clock source selection

Bits 20:21 - Low power timer 2 clock source selection

Bits 18:19 - Low power timer 1 clock source selection

Bits 16:17 - I2C3 clock source selection

Bits 12:13 - I2C1 clock source selection

Bits 10:11 - LPUART1 clock source selection

Bits 2:3 - USART2 clock source selection

Bits 0:1 - USART1 clock source selection

Bits 6:7 - USART4 clock source selection

Bits 4:5 - USART3 clock source selection

Bits 14:15 - I2C2 clock source selection

Bit 25 - Low speed clock output selection

Bit 24 - Low speed clock output enable

Bit 16 - Backup domain software reset

Bit 15 - RTC clock enable

Bits 8:9 - RTC clock source selection

Bit 6 - LSECSSD

Bit 5 - LSECSSON

Bits 3:4 - SE oscillator drive capability

Bit 2 - LSE oscillator bypass

Bit 1 - LSE oscillator ready

Bit 0 - LSE oscillator enable

Bit 31 - Low-power reset flag

Bit 30 - Window watchdog reset flag

Bit 29 - Independent window watchdog reset flag

Bit 28 - Software reset flag

Bit 27 - BOR flag

Bit 26 - Pin reset flag

Bit 25 - Option byte loader reset flag

Bit 24 - Firewall reset flag

Bit 23 - Remove reset flag

Bits 8:11 - SI range after Standby mode

Bit 1 - LSI oscillator ready

Bit 0 - LSI oscillator enable

Bit 0 - HSI48 clock enable

Bit 1 - HSI48 clock ready flag

Bits 7:15 - HSI48 clock calibration

Bit 14 - Low-power run

Bits 9:10 - Voltage scaling range selection

Bit 8 - Disable backup domain write protection

Bits 0:2 - Low-power mode selection

Bit 10 - VDDUSB USB supply valid

Bit 9 - VDDIO2 Independent I/Os supply valid

Bit 7 - Peripheral voltage monitoring 4 enable: VDDA vs. 2.2V

Bit 6 - Peripheral voltage monitoring 3 enable: VDDA vs. 1.62V

Bit 5 - Peripheral voltage monitoring 2 enable: VDDIO2 vs. 0.9V

Bit 4 - Peripheral voltage monitoring 1 enable: VDDUSB vs. 1.2V

Bits 1:3 - Power voltage detector level selection

Bit 0 - Power voltage detector enable

Bit 15 - Enable internal wakeup line

Bit 10 - Apply pull-up and pull-down configuration

Bit 8 - SRAM2 retention in Standby mode

Bit 4 - Enable Wakeup pin WKUP5

Bit 3 - Enable Wakeup pin WKUP4

Bit 2 - Enable Wakeup pin WKUP3

Bit 1 - Enable Wakeup pin WKUP2

Bit 0 - Enable Wakeup pin WKUP1

Bit 9 - VBAT battery charging resistor selection

Bit 8 - VBAT battery charging enable

Bit 4 - Wakeup pin WKUP5 polarity

Bit 3 - Wakeup pin WKUP4 polarity

Bit 2 - Wakeup pin WKUP3 polarity

Bit 1 - Wakeup pin WKUP2 polarity

Bit 0 - Wakeup pin WKUP1 polarity

Bit 15 - Wakeup flag internal

Bit 8 - Standby flag

Bit 4 - Wakeup flag 5

Bit 3 - Wakeup flag 4

Bit 2 - Wakeup flag 3

Bit 1 - Wakeup flag 2

Bit 0 - Wakeup flag 1

Bit 15 - Peripheral voltage monitoring output: VDDA vs. 2.2 V

Bit 14 - Peripheral voltage monitoring output: VDDA vs. 1.62 V

Bit 13 - Peripheral voltage monitoring output: VDDIO2 vs. 0.9 V

Bit 12 - Peripheral voltage monitoring output: VDDUSB vs. 1.2 V

Bit 11 - Power voltage detector output

Bit 10 - Voltage scaling flag

Bit 9 - Low-power regulator flag

Bit 8 - Low-power regulator started

Bit 15 - Port A pull-up bit y (y=0..15)

Bit 14 - Port A pull-up bit y (y=0..15)

Bit 13 - Port A pull-up bit y (y=0..15)

Bit 12 - Port A pull-up bit y (y=0..15)

Bit 11 - Port A pull-up bit y (y=0..15)

Bit 10 - Port A pull-up bit y (y=0..15)

Bit 9 - Port A pull-up bit y (y=0..15)

Bit 8 - Port A pull-up bit y (y=0..15)

Bit 7 - Port A pull-up bit y (y=0..15)

Bit 6 - Port A pull-up bit y (y=0..15)

Bit 5 - Port A pull-up bit y (y=0..15)

Bit 4 - Port A pull-up bit y (y=0..15)

Bit 3 - Port A pull-up bit y (y=0..15)

Bit 2 - Port A pull-up bit y (y=0..15)

Bit 1 - Port A pull-up bit y (y=0..15)

Bit 0 - Port A pull-up bit y (y=0..15)

Bit 15 - Port A pull-down bit y (y=0..15)

Bit 14 - Port A pull-down bit y (y=0..15)

Bit 13 - Port A pull-down bit y (y=0..15)

Bit 12 - Port A pull-down bit y (y=0..15)

Bit 11 - Port A pull-down bit y (y=0..15)

Bit 10 - Port A pull-down bit y (y=0..15)

Bit 9 - Port A pull-down bit y (y=0..15)

Bit 8 - Port A pull-down bit y (y=0..15)

Bit 7 - Port A pull-down bit y (y=0..15)

Bit 6 - Port A pull-down bit y (y=0..15)

Bit 5 - Port A pull-down bit y (y=0..15)

Bit 4 - Port A pull-down bit y (y=0..15)

Bit 3 - Port A pull-down bit y (y=0..15)

Bit 2 - Port A pull-down bit y (y=0..15)

Bit 1 - Port A pull-down bit y (y=0..15)

Bit 0 - Port A pull-down bit y (y=0..15)

Bit 15 - Port B pull-up bit y (y=0..15)

Bit 14 - Port B pull-up bit y (y=0..15)

Bit 13 - Port B pull-up bit y (y=0..15)

Bit 12 - Port B pull-up bit y (y=0..15)

Bit 11 - Port B pull-up bit y (y=0..15)

Bit 10 - Port B pull-up bit y (y=0..15)

Bit 9 - Port B pull-up bit y (y=0..15)

Bit 8 - Port B pull-up bit y (y=0..15)

Bit 7 - Port B pull-up bit y (y=0..15)

Bit 6 - Port B pull-up bit y (y=0..15)

Bit 5 - Port B pull-up bit y (y=0..15)

Bit 4 - Port B pull-up bit y (y=0..15)

Bit 3 - Port B pull-up bit y (y=0..15)

Bit 2 - Port B pull-up bit y (y=0..15)

Bit 1 - Port B pull-up bit y (y=0..15)

Bit 0 - Port B pull-up bit y (y=0..15)

Bit 15 - Port B pull-down bit y (y=0..15)

Bit 14 - Port B pull-down bit y (y=0..15)

Bit 13 - Port B pull-down bit y (y=0..15)

Bit 12 - Port B pull-down bit y (y=0..15)

Bit 11 - Port B pull-down bit y (y=0..15)

Bit 10 - Port B pull-down bit y (y=0..15)

Bit 9 - Port B pull-down bit y (y=0..15)

Bit 8 - Port B pull-down bit y (y=0..15)

Bit 7 - Port B pull-down bit y (y=0..15)

Bit 6 - Port B pull-down bit y (y=0..15)

Bit 5 - Port B pull-down bit y (y=0..15)

Bit 4 - Port B pull-down bit y (y=0..15)

Bit 3 - Port B pull-down bit y (y=0..15)

Bit 2 - Port B pull-down bit y (y=0..15)

Bit 1 - Port B pull-down bit y (y=0..15)

Bit 0 - Port B pull-down bit y (y=0..15)

Bit 15 - Port C pull-up bit y (y=0..15)

Bit 14 - Port C pull-up bit y (y=0..15)

Bit 13 - Port C pull-up bit y (y=0..15)

Bit 12 - Port C pull-up bit y (y=0..15)

Bit 11 - Port C pull-up bit y (y=0..15)

Bit 10 - Port C pull-up bit y (y=0..15)

Bit 9 - Port C pull-up bit y (y=0..15)

Bit 8 - Port C pull-up bit y (y=0..15)

Bit 7 - Port C pull-up bit y (y=0..15)

Bit 6 - Port C pull-up bit y (y=0..15)

Bit 5 - Port C pull-up bit y (y=0..15)

Bit 4 - Port C pull-up bit y (y=0..15)

Bit 3 - Port C pull-up bit y (y=0..15)

Bit 2 - Port C pull-up bit y (y=0..15)

Bit 1 - Port C pull-up bit y (y=0..15)

Bit 0 - Port C pull-up bit y (y=0..15)

Bit 15 - Port C pull-down bit y (y=0..15)

Bit 14 - Port C pull-down bit y (y=0..15)

Bit 13 - Port C pull-down bit y (y=0..15)

Bit 12 - Port C pull-down bit y (y=0..15)

Bit 11 - Port C pull-down bit y (y=0..15)

Bit 10 - Port C pull-down bit y (y=0..15)

Bit 9 - Port C pull-down bit y (y=0..15)

Bit 8 - Port C pull-down bit y (y=0..15)

Bit 7 - Port C pull-down bit y (y=0..15)

Bit 6 - Port C pull-down bit y (y=0..15)

Bit 5 - Port C pull-down bit y (y=0..15)

Bit 4 - Port C pull-down bit y (y=0..15)

Bit 3 - Port C pull-down bit y (y=0..15)

Bit 2 - Port C pull-down bit y (y=0..15)

Bit 1 - Port C pull-down bit y (y=0..15)

Bit 0 - Port C pull-down bit y (y=0..15)

Bit 15 - Port D pull-up bit y (y=0..15)

Bit 14 - Port D pull-up bit y (y=0..15)

Bit 13 - Port D pull-up bit y (y=0..15)

Bit 12 - Port D pull-up bit y (y=0..15)

Bit 11 - Port D pull-up bit y (y=0..15)

Bit 10 - Port D pull-up bit y (y=0..15)

Bit 9 - Port D pull-up bit y (y=0..15)

Bit 8 - Port D pull-up bit y (y=0..15)

Bit 7 - Port D pull-up bit y (y=0..15)

Bit 6 - Port D pull-up bit y (y=0..15)

Bit 5 - Port D pull-up bit y (y=0..15)

Bit 4 - Port D pull-up bit y (y=0..15)

Bit 3 - Port D pull-up bit y (y=0..15)

Bit 2 - Port D pull-up bit y (y=0..15)

Bit 1 - Port D pull-up bit y (y=0..15)

Bit 0 - Port D pull-up bit y (y=0..15)

Bit 15 - Port D pull-down bit y (y=0..15)

Bit 14 - Port D pull-down bit y (y=0..15)

Bit 13 - Port D pull-down bit y (y=0..15)

Bit 12 - Port D pull-down bit y (y=0..15)

Bit 11 - Port D pull-down bit y (y=0..15)

Bit 10 - Port D pull-down bit y (y=0..15)

Bit 9 - Port D pull-down bit y (y=0..15)

Bit 8 - Port D pull-down bit y (y=0..15)

Bit 7 - Port D pull-down bit y (y=0..15)

Bit 6 - Port D pull-down bit y (y=0..15)

Bit 5 - Port D pull-down bit y (y=0..15)

Bit 4 - Port D pull-down bit y (y=0..15)

Bit 3 - Port D pull-down bit y (y=0..15)

Bit 2 - Port D pull-down bit y (y=0..15)

Bit 1 - Port D pull-down bit y (y=0..15)

Bit 0 - Port D pull-down bit y (y=0..15)

Bit 15 - Port E pull-up bit y (y=0..15)

Bit 14 - Port E pull-up bit y (y=0..15)

Bit 13 - Port E pull-up bit y (y=0..15)

Bit 12 - Port E pull-up bit y (y=0..15)

Bit 11 - Port E pull-up bit y (y=0..15)

Bit 10 - Port E pull-up bit y (y=0..15)

Bit 9 - Port E pull-up bit y (y=0..15)

Bit 8 - Port E pull-up bit y (y=0..15)

Bit 7 - Port E pull-up bit y (y=0..15)

Bit 6 - Port E pull-up bit y (y=0..15)

Bit 5 - Port E pull-up bit y (y=0..15)

Bit 4 - Port E pull-up bit y (y=0..15)

Bit 3 - Port E pull-up bit y (y=0..15)

Bit 2 - Port E pull-up bit y (y=0..15)

Bit 1 - Port E pull-up bit y (y=0..15)

Bit 0 - Port E pull-up bit y (y=0..15)

Bit 15 - Port E pull-down bit y (y=0..15)

Bit 14 - Port E pull-down bit y (y=0..15)

Bit 13 - Port E pull-down bit y (y=0..15)

Bit 12 - Port E pull-down bit y (y=0..15)

Bit 11 - Port E pull-down bit y (y=0..15)

Bit 10 - Port E pull-down bit y (y=0..15)

Bit 9 - Port E pull-down bit y (y=0..15)

Bit 8 - Port E pull-down bit y (y=0..15)

Bit 7 - Port E pull-down bit y (y=0..15)

Bit 6 - Port E pull-down bit y (y=0..15)

Bit 5 - Port E pull-down bit y (y=0..15)

Bit 4 - Port E pull-down bit y (y=0..15)

Bit 3 - Port E pull-down bit y (y=0..15)

Bit 2 - Port E pull-down bit y (y=0..15)

Bit 1 - Port E pull-down bit y (y=0..15)

Bit 0 - Port E pull-down bit y (y=0..15)

Bit 15 - Port F pull-up bit y (y=0..15)

Bit 14 - Port F pull-up bit y (y=0..15)

Bit 13 - Port F pull-up bit y (y=0..15)

Bit 12 - Port F pull-up bit y (y=0..15)

Bit 11 - Port F pull-up bit y (y=0..15)

Bit 10 - Port F pull-up bit y (y=0..15)

Bit 9 - Port F pull-up bit y (y=0..15)

Bit 8 - Port F pull-up bit y (y=0..15)

Bit 7 - Port F pull-up bit y (y=0..15)

Bit 6 - Port F pull-up bit y (y=0..15)

Bit 5 - Port F pull-up bit y (y=0..15)

Bit 4 - Port F pull-up bit y (y=0..15)

Bit 3 - Port F pull-up bit y (y=0..15)

Bit 2 - Port F pull-up bit y (y=0..15)

Bit 1 - Port F pull-up bit y (y=0..15)

Bit 0 - Port F pull-up bit y (y=0..15)

Bit 15 - Port F pull-down bit y (y=0..15)

Bit 14 - Port F pull-down bit y (y=0..15)

Bit 13 - Port F pull-down bit y (y=0..15)

Bit 12 - Port F pull-down bit y (y=0..15)

Bit 11 - Port F pull-down bit y (y=0..15)

Bit 10 - Port F pull-down bit y (y=0..15)

Bit 9 - Port F pull-down bit y (y=0..15)

Bit 8 - Port F pull-down bit y (y=0..15)

Bit 7 - Port F pull-down bit y (y=0..15)

Bit 6 - Port F pull-down bit y (y=0..15)

Bit 5 - Port F pull-down bit y (y=0..15)

Bit 4 - Port F pull-down bit y (y=0..15)

Bit 3 - Port F pull-down bit y (y=0..15)

Bit 2 - Port F pull-down bit y (y=0..15)

Bit 1 - Port F pull-down bit y (y=0..15)

Bit 0 - Port F pull-down bit y (y=0..15)

Bit 15 - Port G pull-up bit y (y=0..15)

Bit 14 - Port G pull-up bit y (y=0..15)

Bit 13 - Port G pull-up bit y (y=0..15)

Bit 12 - Port G pull-up bit y (y=0..15)

Bit 11 - Port G pull-up bit y (y=0..15)

Bit 10 - Port G pull-up bit y (y=0..15)

Bit 9 - Port G pull-up bit y (y=0..15)

Bit 8 - Port G pull-up bit y (y=0..15)

Bit 7 - Port G pull-up bit y (y=0..15)

Bit 6 - Port G pull-up bit y (y=0..15)

Bit 5 - Port G pull-up bit y (y=0..15)

Bit 4 - Port G pull-up bit y (y=0..15)

Bit 3 - Port G pull-up bit y (y=0..15)

Bit 2 - Port G pull-up bit y (y=0..15)

Bit 1 - Port G pull-up bit y (y=0..15)

Bit 0 - Port G pull-up bit y (y=0..15)

Bit 15 - Port G pull-down bit y (y=0..15)

Bit 14 - Port G pull-down bit y (y=0..15)

Bit 13 - Port G pull-down bit y (y=0..15)

Bit 12 - Port G pull-down bit y (y=0..15)

Bit 11 - Port G pull-down bit y (y=0..15)

Bit 10 - Port G pull-down bit y (y=0..15)

Bit 9 - Port G pull-down bit y (y=0..15)

Bit 8 - Port G pull-down bit y (y=0..15)

Bit 7 - Port G pull-down bit y (y=0..15)

Bit 6 - Port G pull-down bit y (y=0..15)

Bit 5 - Port G pull-down bit y (y=0..15)

Bit 4 - Port G pull-down bit y (y=0..15)

Bit 3 - Port G pull-down bit y (y=0..15)

Bit 2 - Port G pull-down bit y (y=0..15)

Bit 1 - Port G pull-down bit y (y=0..15)

Bit 0 - Port G pull-down bit y (y=0..15)

Bit 1 - Port H pull-up bit y (y=0..1)

Bit 0 - Port H pull-up bit y (y=0..1)

Bit 1 - Port H pull-down bit y (y=0..1)

Bit 0 - Port H pull-down bit y (y=0..1)

Bit 8 - Flash Bank mode selection

Bit 3 - QUADSPI memory mapping swap

Bits 0:2 - Memory mapping selection

Bits 26:31 - Floating Point Unit interrupts enable bits

Bit 22 - I2C3 Fast-mode Plus driving capability activation

Bit 21 - I2C2 Fast-mode Plus driving capability activation

Bit 20 - I2C1 Fast-mode Plus driving capability activation

Bit 19 - Fast-mode Plus (Fm+) driving capability activation on PB9

Bit 18 - Fast-mode Plus (Fm+) driving capability activation on PB8

Bit 17 - Fast-mode Plus (Fm+) driving capability activation on PB7

Bit 16 - Fast-mode Plus (Fm+) driving capability activation on PB6

Bit 8 - I/O analog switch voltage booster enable

Bit 0 - Firewall disable

Bits 12:14 - EXTI 3 configuration bits

Bits 8:10 - EXTI 2 configuration bits

Bits 4:6 - EXTI 1 configuration bits

Bits 0:2 - EXTI 0 configuration bits

Bits 12:14 - EXTI 7 configuration bits

Bits 8:10 - EXTI 6 configuration bits

Bits 4:6 - EXTI 5 configuration bits

Bits 0:2 - EXTI 4 configuration bits

Bits 12:14 - EXTI 11 configuration bits

Bits 8:10 - EXTI 10 configuration bits

Bits 4:6 - EXTI 9 configuration bits

Bits 0:2 - EXTI 8 configuration bits

Bits 12:14 - EXTI15 configuration bits

Bits 8:10 - EXTI14 configuration bits

Bits 4:6 - EXTI13 configuration bits

Bits 0:2 - EXTI12 configuration bits

Bit 1 - SRAM2 busy by erase operation

Bit 0 - SRAM2 Erase

Bit 8 - SRAM2 parity error flag

Bit 3 - Interrupt enable

Bit 2 - Random number generator enable

Bit 6 - Seed error interrupt status

Bit 5 - Clock error interrupt status

Bit 2 - Seed error current status

Bit 1 - Clock error current status

Bit 0 - Data ready

Bits 0:31 - Random data

Bit 12 - Enable DMA management of data output phase

Bit 11 - Enable DMA management of data input phase

Bit 10 - Error interrupt enable

Bit 9 - CCF flag interrupt enable

Bit 8 - Error clear

Bit 7 - Computation Complete Flag Clear

Bits 5:6 - AES chaining mode

Bits 3:4 - AES operating mode

Bits 1:2 - Data type selection (for data in and data out to/from the cryptographic block)

Bit 0 - AES enable

Bit 2 - Write error flag

Bit 1 - Read error flag

Bit 0 - Computation complete flag

Bits 0:31 - Data Input Register

Bits 0:31 - Data output register

Bits 0:31 - Data Output Register (LSB key [31:0])

Bits 0:31 - AES key register (key [63:32])

Bits 0:31 - AES key register (key [95:64])

Bits 0:31 - AES key register (MSB key [127:96])

Bits 0:31 - initialization vector register (LSB IVR [31:0])

Bits 0:31 - Initialization Vector Register (IVR [63:32])

Bits 0:31 - Initialization Vector Register (IVR [95:64])

Bits 0:31 - Initialization Vector Register (MSB IVR [127:96])

Bit 10 - JQOVF

Bit 9 - AWD3

Bit 8 - AWD2

Bit 7 - AWD1

Bit 6 - JEOS

Bit 5 - JEOC

Bit 4 - OVR

Bit 3 - EOS

Bit 2 - EOC

Bit 1 - EOSMP

Bit 0 - ADRDY

Bit 10 - JQOVFIE

Bit 9 - AWD3IE

Bit 8 - AWD2IE

Bit 7 - AWD1IE

Bit 6 - JEOSIE

Bit 5 - JEOCIE

Bit 4 - OVRIE

Bit 3 - EOSIE

Bit 2 - EOCIE

Bit 1 - EOSMPIE

Bit 0 - ADRDYIE

Bit 31 - ADCAL

Bit 30 - ADCALDIF

Bit 29 - DEEPPWD

Bit 28 - ADVREGEN

Bit 5 - JADSTP

Bit 4 - ADSTP

Bit 3 - JADSTART

Bit 2 - ADSTART

Bit 1 - ADDIS

Bit 0 - ADEN

Bits 26:30 - AWDCH1CH

Bit 25 - JAUTO

Bit 24 - JAWD1EN

Bit 23 - AWD1EN

Bit 22 - AWD1SGL

Bit 21 - JQM

Bit 20 - JDISCEN

Bits 17:19 - DISCNUM

Bit 16 - DISCEN

Bit 15 - AUTOFF

Bit 14 - AUTDLY

Bit 13 - CONT

Bit 12 - OVRMOD

Bits 10:11 - EXTEN

Bits 6:9 - EXTSEL

Bit 5 - ALIGN

Bits 3:4 - RES

Bit 1 - DMACFG

Bit 0 - DMAEN

Bit 10 - EXTEN

Bit 9 - EXTSEL

Bits 5:8 - ALIGN

Bits 2:4 - RES

Bit 1 - DMACFG

Bit 0 - DMAEN

Bits 27:29 - Channel 9 sampling time selection

Bits 24:26 - Channel 8 sampling time selection

Bits 21:23 - Channel 7 sampling time selection

Bits 18:20 - Channel 6 sampling time selection

Bits 15:17 - Channel 5 sampling time selection

Bits 12:14 - Channel 4 sampling time selection

Bits 9:11 - Channel 3 sampling time selection

Bits 6:8 - Channel 2 sampling time selection

Bits 3:5 - Channel 1 sampling time selection

Bits 0:2 - Channel 0 sampling time selection

Bits 24:26 - Channel 18 sampling time selection

Bits 21:23 - Channel 17 sampling time selection

Bits 18:20 - Channel 16 sampling time selection

Bits 15:17 - Channel 15 sampling time selection

Bits 12:14 - Channel 14 sampling time selection

Bits 9:11 - Channel 13 sampling time selection

Bits 6:8 - Channel 12 sampling time selection

Bits 3:5 - Channel 11 sampling time selection

Bits 0:2 - Channel 10 sampling time selection

Bits 16:27 - HT1

Bits 0:11 - LT1

Bits 16:23 - HT2

Bits 0:7 - LT2

Bits 16:23 - HT3

Bits 0:7 - LT3

Bits 24:28 - SQ4

Bits 18:22 - SQ3

Bits 12:16 - SQ2

Bits 6:10 - SQ1

Bits 0:3 - Regular channel sequence length

Bits 24:28 - SQ9

Bits 18:22 - SQ8

Bits 12:16 - SQ7

Bits 6:10 - SQ6

Bits 0:4 - SQ5

Bits 24:28 - SQ14

Bits 18:22 - SQ13

Bits 12:16 - SQ12

Bits 6:10 - SQ11

Bits 0:4 - SQ10

Bits 6:10 - SQ16

Bits 0:4 - SQ15

Bits 0:15 - regularDATA

Bits 26:30 - JSQ4

Bits 20:24 - JSQ3

Bits 14:18 - JSQ2

Bits 8:12 - JSQ1

Bits 6:7 - JEXTEN

Bits 2:5 - JEXTSEL

Bits 0:1 - JL

Bit 31 - OFFSET1_EN

Bits 26:30 - OFFSET1_CH

Bits 0:11 - OFFSET1

Bit 31 - OFFSET2_EN

Bits 26:30 - OFFSET2_CH

Bits 0:11 - OFFSET2

Bit 31 - OFFSET3_EN

Bits 26:30 - OFFSET3_CH

Bits 0:11 - OFFSET3

Bit 31 - OFFSET4_EN

Bits 26:30 - OFFSET4_CH

Bits 0:11 - OFFSET4

Bits 0:15 - JDATA1

Bits 0:15 - JDATA2

Bits 0:15 - JDATA3

Bits 0:15 - JDATA4

Bits 1:18 - AWD2CH

Bits 1:18 - AWD3CH

Bits 1:15 - Differential mode for channels 15 to 1

Bits 16:18 - Differential mode for channels 18 to 16

Bits 16:22 - CALFACT_D

Bits 0:6 - CALFACT_S

Get enumerated values variant

Checks if the value of the field is INPUT

Checks if the value of the field is OUTPUT

Checks if the value of the field is ALTERNATE

Checks if the value of the field is ANALOG

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is PUSHPULL

Checks if the value of the field is OPENDRAIN

Bit 15 - Port x configuration bits (y = 0..15)

Bit 14 - Port x configuration bits (y = 0..15)

Bit 13 - Port x configuration bits (y = 0..15)

Bit 12 - Port x configuration bits (y = 0..15)

Bit 11 - Port x configuration bits (y = 0..15)

Bit 10 - Port x configuration bits (y = 0..15)

Bit 9 - Port x configuration bits (y = 0..15)

Bit 8 - Port x configuration bits (y = 0..15)

Bit 7 - Port x configuration bits (y = 0..15)

Bit 6 - Port x configuration bits (y = 0..15)

Bit 5 - Port x configuration bits (y = 0..15)

Bit 4 - Port x configuration bits (y = 0..15)

Bit 3 - Port x configuration bits (y = 0..15)

Bit 2 - Port x configuration bits (y = 0..15)

Bit 1 - Port x configuration bits (y = 0..15)

Bit 0 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is LOWSPEED

Checks if the value of the field is MEDIUMSPEED

Checks if the value of the field is HIGHSPEED

Checks if the value of the field is VERYHIGHSPEED

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is FLOATING

Checks if the value of the field is PULLUP

Checks if the value of the field is PULLDOWN

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Bit 15 - Port input data (y = 0..15)

Bit 14 - Port input data (y = 0..15)

Bit 13 - Port input data (y = 0..15)

Bit 12 - Port input data (y = 0..15)

Bit 11 - Port input data (y = 0..15)

Bit 10 - Port input data (y = 0..15)

Bit 9 - Port input data (y = 0..15)

Bit 8 - Port input data (y = 0..15)

Bit 7 - Port input data (y = 0..15)

Bit 6 - Port input data (y = 0..15)

Bit 5 - Port input data (y = 0..15)

Bit 4 - Port input data (y = 0..15)

Bit 3 - Port input data (y = 0..15)

Bit 2 - Port input data (y = 0..15)

Bit 1 - Port input data (y = 0..15)

Bit 0 - Port input data (y = 0..15)

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Bit 15 - Port output data (y = 0..15)

Bit 14 - Port output data (y = 0..15)

Bit 13 - Port output data (y = 0..15)

Bit 12 - Port output data (y = 0..15)

Bit 11 - Port output data (y = 0..15)

Bit 10 - Port output data (y = 0..15)

Bit 9 - Port output data (y = 0..15)

Bit 8 - Port output data (y = 0..15)

Bit 7 - Port output data (y = 0..15)

Bit 6 - Port output data (y = 0..15)

Bit 5 - Port output data (y = 0..15)

Bit 4 - Port output data (y = 0..15)

Bit 3 - Port output data (y = 0..15)

Bit 2 - Port output data (y = 0..15)

Bit 1 - Port output data (y = 0..15)

Bit 0 - Port output data (y = 0..15)

Get enumerated values variant

Checks if the value of the field is NOTACTIVE

Checks if the value of the field is ACTIVE

Get enumerated values variant

Checks if the value of the field is UNLOCKED

Checks if the value of the field is LOCKED

Get enumerated values variant

Checks if the value of the field is UNLOCKED

Checks if the value of the field is LOCKED

Bit 16 - Port x lock bit y (y= 0..15)

Bit 15 - Port x lock bit y (y= 0..15)

Bit 14 - Port x lock bit y (y= 0..15)

Bit 13 - Port x lock bit y (y= 0..15)

Bit 12 - Port x lock bit y (y= 0..15)

Bit 11 - Port x lock bit y (y= 0..15)

Bit 10 - Port x lock bit y (y= 0..15)

Bit 9 - Port x lock bit y (y= 0..15)

Bit 8 - Port x lock bit y (y= 0..15)

Bit 7 - Port x lock bit y (y= 0..15)

Bit 6 - Port x lock bit y (y= 0..15)

Bit 5 - Port x lock bit y (y= 0..15)

Bit 4 - Port x lock bit y (y= 0..15)

Bit 3 - Port x lock bit y (y= 0..15)

Bit 2 - Port x lock bit y (y= 0..15)

Bit 1 - Port x lock bit y (y= 0..15)

Bit 0 - Port x lock bit y (y= 0..15)

Get enumerated values variant

Checks if the value of the field is AF0

Checks if the value of the field is AF1

Checks if the value of the field is AF2

Checks if the value of the field is AF3

Checks if the value of the field is AF4

Checks if the value of the field is AF5

Checks if the value of the field is AF6

Checks if the value of the field is AF7

Checks if the value of the field is AF8

Checks if the value of the field is AF9

Checks if the value of the field is AF10

Checks if the value of the field is AF11

Checks if the value of the field is AF12

Checks if the value of the field is AF13

Checks if the value of the field is AF14

Checks if the value of the field is AF15

Bits 28:31 - Alternate function selection for port x bit y (y = 0..7)

Bits 24:27 - Alternate function selection for port x bit y (y = 0..7)

Bits 20:23 - Alternate function selection for port x bit y (y = 0..7)

Bits 16:19 - Alternate function selection for port x bit y (y = 0..7)

Bits 12:15 - Alternate function selection for port x bit y (y = 0..7)

Bits 8:11 - Alternate function selection for port x bit y (y = 0..7)

Bits 4:7 - Alternate function selection for port x bit y (y = 0..7)

Bits 0:3 - Alternate function selection for port x bit y (y = 0..7)

Get enumerated values variant

Checks if the value of the field is AF0

Checks if the value of the field is AF1

Checks if the value of the field is AF2

Checks if the value of the field is AF3

Checks if the value of the field is AF4

Checks if the value of the field is AF5

Checks if the value of the field is AF6

Checks if the value of the field is AF7

Checks if the value of the field is AF8

Checks if the value of the field is AF9

Checks if the value of the field is AF10

Checks if the value of the field is AF11

Checks if the value of the field is AF12

Checks if the value of the field is AF13

Checks if the value of the field is AF14

Checks if the value of the field is AF15

Bits 28:31 - Alternate function selection for port x bit y (y = 8..15)

Bits 24:27 - Alternate function selection for port x bit y (y = 8..15)

Bits 20:23 - Alternate function selection for port x bit y (y = 8..15)

Bits 16:19 - Alternate function selection for port x bit y (y = 8..15)

Bits 12:15 - Alternate function selection for port x bit y (y = 8..15)

Bits 8:11 - Alternate function selection for port x bit y (y = 8..15)

Bits 4:7 - Alternate function selection for port x bit y (y = 8..15)

Bits 0:3 - Alternate function selection for port x bit y (y = 8..15)

Get enumerated values variant

Checks if the value of the field is INPUT

Checks if the value of the field is OUTPUT

Checks if the value of the field is ALTERNATE

Checks if the value of the field is ANALOG

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is PUSHPULL

Checks if the value of the field is OPENDRAIN

Bit 15 - Port x configuration bits (y = 0..15)

Bit 14 - Port x configuration bits (y = 0..15)

Bit 13 - Port x configuration bits (y = 0..15)

Bit 12 - Port x configuration bits (y = 0..15)

Bit 11 - Port x configuration bits (y = 0..15)

Bit 10 - Port x configuration bits (y = 0..15)

Bit 9 - Port x configuration bits (y = 0..15)

Bit 8 - Port x configuration bits (y = 0..15)

Bit 7 - Port x configuration bits (y = 0..15)

Bit 6 - Port x configuration bits (y = 0..15)

Bit 5 - Port x configuration bits (y = 0..15)

Bit 4 - Port x configuration bits (y = 0..15)

Bit 3 - Port x configuration bits (y = 0..15)

Bit 2 - Port x configuration bits (y = 0..15)

Bit 1 - Port x configuration bits (y = 0..15)

Bit 0 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is LOWSPEED

Checks if the value of the field is MEDIUMSPEED

Checks if the value of the field is HIGHSPEED

Checks if the value of the field is VERYHIGHSPEED

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is FLOATING

Checks if the value of the field is PULLUP

Checks if the value of the field is PULLDOWN

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Bit 15 - Port input data (y = 0..15)

Bit 14 - Port input data (y = 0..15)

Bit 13 - Port input data (y = 0..15)

Bit 12 - Port input data (y = 0..15)

Bit 11 - Port input data (y = 0..15)

Bit 10 - Port input data (y = 0..15)

Bit 9 - Port input data (y = 0..15)

Bit 8 - Port input data (y = 0..15)

Bit 7 - Port input data (y = 0..15)

Bit 6 - Port input data (y = 0..15)

Bit 5 - Port input data (y = 0..15)

Bit 4 - Port input data (y = 0..15)

Bit 3 - Port input data (y = 0..15)

Bit 2 - Port input data (y = 0..15)

Bit 1 - Port input data (y = 0..15)

Bit 0 - Port input data (y = 0..15)

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Bit 15 - Port output data (y = 0..15)

Bit 14 - Port output data (y = 0..15)

Bit 13 - Port output data (y = 0..15)

Bit 12 - Port output data (y = 0..15)

Bit 11 - Port output data (y = 0..15)

Bit 10 - Port output data (y = 0..15)

Bit 9 - Port output data (y = 0..15)

Bit 8 - Port output data (y = 0..15)

Bit 7 - Port output data (y = 0..15)

Bit 6 - Port output data (y = 0..15)

Bit 5 - Port output data (y = 0..15)

Bit 4 - Port output data (y = 0..15)

Bit 3 - Port output data (y = 0..15)

Bit 2 - Port output data (y = 0..15)

Bit 1 - Port output data (y = 0..15)

Bit 0 - Port output data (y = 0..15)

Get enumerated values variant

Checks if the value of the field is NOTACTIVE

Checks if the value of the field is ACTIVE

Get enumerated values variant

Checks if the value of the field is UNLOCKED

Checks if the value of the field is LOCKED

Get enumerated values variant

Checks if the value of the field is UNLOCKED

Checks if the value of the field is LOCKED

Bit 16 - Port x lock bit y (y= 0..15)

Bit 15 - Port x lock bit y (y= 0..15)

Bit 14 - Port x lock bit y (y= 0..15)

Bit 13 - Port x lock bit y (y= 0..15)

Bit 12 - Port x lock bit y (y= 0..15)

Bit 11 - Port x lock bit y (y= 0..15)

Bit 10 - Port x lock bit y (y= 0..15)

Bit 9 - Port x lock bit y (y= 0..15)

Bit 8 - Port x lock bit y (y= 0..15)

Bit 7 - Port x lock bit y (y= 0..15)

Bit 6 - Port x lock bit y (y= 0..15)

Bit 5 - Port x lock bit y (y= 0..15)

Bit 4 - Port x lock bit y (y= 0..15)

Bit 3 - Port x lock bit y (y= 0..15)

Bit 2 - Port x lock bit y (y= 0..15)

Bit 1 - Port x lock bit y (y= 0..15)

Bit 0 - Port x lock bit y (y= 0..15)

Get enumerated values variant

Checks if the value of the field is AF0

Checks if the value of the field is AF1

Checks if the value of the field is AF2

Checks if the value of the field is AF3

Checks if the value of the field is AF4

Checks if the value of the field is AF5

Checks if the value of the field is AF6

Checks if the value of the field is AF7

Checks if the value of the field is AF8

Checks if the value of the field is AF9

Checks if the value of the field is AF10

Checks if the value of the field is AF11

Checks if the value of the field is AF12

Checks if the value of the field is AF13

Checks if the value of the field is AF14

Checks if the value of the field is AF15

Bits 28:31 - Alternate function selection for port x bit y (y = 0..7)

Bits 24:27 - Alternate function selection for port x bit y (y = 0..7)

Bits 20:23 - Alternate function selection for port x bit y (y = 0..7)

Bits 16:19 - Alternate function selection for port x bit y (y = 0..7)

Bits 12:15 - Alternate function selection for port x bit y (y = 0..7)

Bits 8:11 - Alternate function selection for port x bit y (y = 0..7)

Bits 4:7 - Alternate function selection for port x bit y (y = 0..7)

Bits 0:3 - Alternate function selection for port x bit y (y = 0..7)

Get enumerated values variant

Checks if the value of the field is AF0

Checks if the value of the field is AF1

Checks if the value of the field is AF2

Checks if the value of the field is AF3

Checks if the value of the field is AF4

Checks if the value of the field is AF5

Checks if the value of the field is AF6

Checks if the value of the field is AF7

Checks if the value of the field is AF8

Checks if the value of the field is AF9

Checks if the value of the field is AF10

Checks if the value of the field is AF11

Checks if the value of the field is AF12

Checks if the value of the field is AF13

Checks if the value of the field is AF14

Checks if the value of the field is AF15

Bits 28:31 - Alternate function selection for port x bit y (y = 8..15)

Bits 24:27 - Alternate function selection for port x bit y (y = 8..15)

Bits 20:23 - Alternate function selection for port x bit y (y = 8..15)

Bits 16:19 - Alternate function selection for port x bit y (y = 8..15)

Bits 12:15 - Alternate function selection for port x bit y (y = 8..15)

Bits 8:11 - Alternate function selection for port x bit y (y = 8..15)

Bits 4:7 - Alternate function selection for port x bit y (y = 8..15)

Bits 0:3 - Alternate function selection for port x bit y (y = 8..15)

Get enumerated values variant

Checks if the value of the field is INPUT

Checks if the value of the field is OUTPUT

Checks if the value of the field is ALTERNATE

Checks if the value of the field is ANALOG

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is PUSHPULL

Checks if the value of the field is OPENDRAIN

Bit 15 - Port x configuration bits (y = 0..15)

Bit 14 - Port x configuration bits (y = 0..15)

Bit 13 - Port x configuration bits (y = 0..15)

Bit 12 - Port x configuration bits (y = 0..15)

Bit 11 - Port x configuration bits (y = 0..15)

Bit 10 - Port x configuration bits (y = 0..15)

Bit 9 - Port x configuration bits (y = 0..15)

Bit 8 - Port x configuration bits (y = 0..15)

Bit 7 - Port x configuration bits (y = 0..15)

Bit 6 - Port x configuration bits (y = 0..15)

Bit 5 - Port x configuration bits (y = 0..15)

Bit 4 - Port x configuration bits (y = 0..15)

Bit 3 - Port x configuration bits (y = 0..15)

Bit 2 - Port x configuration bits (y = 0..15)

Bit 1 - Port x configuration bits (y = 0..15)

Bit 0 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is LOWSPEED

Checks if the value of the field is MEDIUMSPEED

Checks if the value of the field is HIGHSPEED

Checks if the value of the field is VERYHIGHSPEED

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is FLOATING

Checks if the value of the field is PULLUP

Checks if the value of the field is PULLDOWN

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Bit 15 - Port input data (y = 0..15)

Bit 14 - Port input data (y = 0..15)

Bit 13 - Port input data (y = 0..15)

Bit 12 - Port input data (y = 0..15)

Bit 11 - Port input data (y = 0..15)

Bit 10 - Port input data (y = 0..15)

Bit 9 - Port input data (y = 0..15)

Bit 8 - Port input data (y = 0..15)

Bit 7 - Port input data (y = 0..15)

Bit 6 - Port input data (y = 0..15)

Bit 5 - Port input data (y = 0..15)

Bit 4 - Port input data (y = 0..15)

Bit 3 - Port input data (y = 0..15)

Bit 2 - Port input data (y = 0..15)

Bit 1 - Port input data (y = 0..15)

Bit 0 - Port input data (y = 0..15)

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Bit 15 - Port output data (y = 0..15)

Bit 14 - Port output data (y = 0..15)

Bit 13 - Port output data (y = 0..15)

Bit 12 - Port output data (y = 0..15)

Bit 11 - Port output data (y = 0..15)

Bit 10 - Port output data (y = 0..15)

Bit 9 - Port output data (y = 0..15)

Bit 8 - Port output data (y = 0..15)

Bit 7 - Port output data (y = 0..15)

Bit 6 - Port output data (y = 0..15)

Bit 5 - Port output data (y = 0..15)

Bit 4 - Port output data (y = 0..15)

Bit 3 - Port output data (y = 0..15)

Bit 2 - Port output data (y = 0..15)

Bit 1 - Port output data (y = 0..15)

Bit 0 - Port output data (y = 0..15)

Get enumerated values variant

Checks if the value of the field is NOTACTIVE

Checks if the value of the field is ACTIVE

Get enumerated values variant

Checks if the value of the field is UNLOCKED

Checks if the value of the field is LOCKED

Get enumerated values variant

Checks if the value of the field is UNLOCKED

Checks if the value of the field is LOCKED

Bit 16 - Port x lock bit y (y= 0..15)

Bit 15 - Port x lock bit y (y= 0..15)

Bit 14 - Port x lock bit y (y= 0..15)

Bit 13 - Port x lock bit y (y= 0..15)

Bit 12 - Port x lock bit y (y= 0..15)

Bit 11 - Port x lock bit y (y= 0..15)

Bit 10 - Port x lock bit y (y= 0..15)

Bit 9 - Port x lock bit y (y= 0..15)

Bit 8 - Port x lock bit y (y= 0..15)

Bit 7 - Port x lock bit y (y= 0..15)

Bit 6 - Port x lock bit y (y= 0..15)

Bit 5 - Port x lock bit y (y= 0..15)

Bit 4 - Port x lock bit y (y= 0..15)

Bit 3 - Port x lock bit y (y= 0..15)

Bit 2 - Port x lock bit y (y= 0..15)

Bit 1 - Port x lock bit y (y= 0..15)

Bit 0 - Port x lock bit y (y= 0..15)

Get enumerated values variant

Checks if the value of the field is AF0

Checks if the value of the field is AF1

Checks if the value of the field is AF2

Checks if the value of the field is AF3

Checks if the value of the field is AF4

Checks if the value of the field is AF5

Checks if the value of the field is AF6

Checks if the value of the field is AF7

Checks if the value of the field is AF8

Checks if the value of the field is AF9

Checks if the value of the field is AF10

Checks if the value of the field is AF11

Checks if the value of the field is AF12

Checks if the value of the field is AF13

Checks if the value of the field is AF14

Checks if the value of the field is AF15

Bits 28:31 - Alternate function selection for port x bit y (y = 0..7)

Bits 24:27 - Alternate function selection for port x bit y (y = 0..7)

Bits 20:23 - Alternate function selection for port x bit y (y = 0..7)

Bits 16:19 - Alternate function selection for port x bit y (y = 0..7)

Bits 12:15 - Alternate function selection for port x bit y (y = 0..7)

Bits 8:11 - Alternate function selection for port x bit y (y = 0..7)

Bits 4:7 - Alternate function selection for port x bit y (y = 0..7)

Bits 0:3 - Alternate function selection for port x bit y (y = 0..7)

Get enumerated values variant

Checks if the value of the field is AF0

Checks if the value of the field is AF1

Checks if the value of the field is AF2

Checks if the value of the field is AF3

Checks if the value of the field is AF4

Checks if the value of the field is AF5

Checks if the value of the field is AF6

Checks if the value of the field is AF7

Checks if the value of the field is AF8

Checks if the value of the field is AF9

Checks if the value of the field is AF10

Checks if the value of the field is AF11

Checks if the value of the field is AF12

Checks if the value of the field is AF13

Checks if the value of the field is AF14

Checks if the value of the field is AF15

Bits 28:31 - Alternate function selection for port x bit y (y = 8..15)

Bits 24:27 - Alternate function selection for port x bit y (y = 8..15)

Bits 20:23 - Alternate function selection for port x bit y (y = 8..15)

Bits 16:19 - Alternate function selection for port x bit y (y = 8..15)

Bits 12:15 - Alternate function selection for port x bit y (y = 8..15)

Bits 8:11 - Alternate function selection for port x bit y (y = 8..15)

Bits 4:7 - Alternate function selection for port x bit y (y = 8..15)

Bits 0:3 - Alternate function selection for port x bit y (y = 8..15)

Get enumerated values variant

Checks if the value of the field is MASTERCLOCK

Checks if the value of the field is NODIV

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ONSTART

Checks if the value of the field is IMMEDIATELY

Get enumerated values variant

Checks if the value of the field is STEREO

Checks if the value of the field is MONO

Get enumerated values variant

Checks if the value of the field is ASYNCHRONOUS

Checks if the value of the field is INTERNAL

Checks if the value of the field is EXTERNAL

Get enumerated values variant

Checks if the value of the field is FALLINGEDGE

Checks if the value of the field is RISINGEDGE

Get enumerated values variant

Checks if the value of the field is MSBFIRST

Checks if the value of the field is LSBFIRST

Get enumerated values variant

Checks if the value of the field is BIT8

Checks if the value of the field is BIT10

Checks if the value of the field is BIT16

Checks if the value of the field is BIT20

Checks if the value of the field is BIT24

Checks if the value of the field is BIT32

Get enumerated values variant

Checks if the value of the field is FREE

Checks if the value of the field is SPDIF

Checks if the value of the field is AC97

Get enumerated values variant

Checks if the value of the field is MASTERTX

Checks if the value of the field is MASTERRX

Checks if the value of the field is SLAVETX

Checks if the value of the field is SLAVERX

Bits 20:23 - Master clock divider

Bit 19 - No divider

Bit 17 - DMA enable

Bit 16 - Audio block A enable

Bit 13 - Output drive

Bit 12 - Mono mode

Bits 10:11 - Synchronization enable

Bit 9 - Clock strobing edge

Bit 8 - Least significant bit first

Bits 5:7 - Data size

Bits 2:3 - Protocol configuration

Bits 0:1 - Audio block mode

Get enumerated values variant

Checks if the value of the field is NOCOMPANDING

Checks if the value of the field is MULAW

Checks if the value of the field is ALAW

Get enumerated values variant

Checks if the value of the field is ONESCOMPLEMENT

Checks if the value of the field is TWOSCOMPLEMENT

Get enumerated values variant

Checks if the value of the field is SENDZERO

Checks if the value of the field is SENDLAST

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is NOFLUSH

Checks if the value of the field is FLUSH

Get enumerated values variant

Checks if the value of the field is EMPTY

Checks if the value of the field is QUARTER1

Checks if the value of the field is QUARTER2

Checks if the value of the field is QUARTER3

Checks if the value of the field is FULL

Bits 14:15 - Companding mode

Bit 13 - Complement bit

Bits 7:12 - Mute counter

Bit 6 - Mute value

Bit 5 - Mute

Bit 4 - Tristate management on data line

Bit 3 - FIFO flush

Bits 0:2 - FIFO threshold

Get enumerated values variant

Checks if the value of the field is ONFIRST

Checks if the value of the field is BEFOREFIRST

Get enumerated values variant

Checks if the value of the field is FALLINGEDGE

Checks if the value of the field is RISINGEDGE

Bit 18 - Frame synchronization offset

Bit 17 - Frame synchronization polarity

Bit 16 - Frame synchronization definition

Bits 8:14 - Frame synchronization active level length

Bits 0:7 - Frame length

Get enumerated values variant

Checks if the value of the field is INACTIVE

Checks if the value of the field is ACTIVE

Get enumerated values variant

Checks if the value of the field is DATASIZE

Checks if the value of the field is BIT16

Checks if the value of the field is BIT32

Bits 16:31 - Slot enable

Bits 8:11 - Number of slots in an audio frame

Bits 6:7 - Slot size

Bits 0:4 - First bit offset

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 6 - Late frame synchronization detection interrupt enable

Bit 5 - Anticipated frame synchronization detection interrupt enable

Bit 4 - Codec not ready interrupt enable

Bit 3 - FIFO request interrupt enable

Bit 2 - Wrong clock configuration interrupt enable

Bit 1 - Mute detection interrupt enable

Bit 0 - Overrun/underrun interrupt enable

Get enumerated values variant

Checks if the value of the field is EMPTY

Checks if the value of the field is QUARTER1

Checks if the value of the field is QUARTER2

Checks if the value of the field is QUARTER3

Checks if the value of the field is QUARTER4

Checks if the value of the field is FULL

Get enumerated values variant

Checks if the value of the field is NOERROR

Checks if the value of the field is NOSYNC

Get enumerated values variant

Checks if the value of the field is NOERROR

Checks if the value of the field is EARLYSYNC

Get enumerated values variant

Checks if the value of the field is READY

Checks if the value of the field is NOTREADY

Get enumerated values variant

Checks if the value of the field is NOREQUEST

Checks if the value of the field is REQUEST

Get enumerated values variant

Checks if the value of the field is CORRECT

Checks if the value of the field is WRONG

Get enumerated values variant

Checks if the value of the field is NOMUTE

Checks if the value of the field is MUTE

Get enumerated values variant

Checks if the value of the field is NOERROR

Checks if the value of the field is OVERRUN

Bits 16:18 - FIFO level threshold

Bit 6 - Late frame synchronization detection

Bit 5 - Anticipated frame synchronization detection

Bit 4 - Codec not ready

Bit 3 - FIFO request

Bit 2 - Wrong clock configuration flag. This bit is read only

Bit 1 - Mute detection

Bit 0 - Overrun / underrun

Get enumerated values variant

Checks if the value of the field is CLEAR

Get enumerated values variant

Checks if the value of the field is CLEAR

Get enumerated values variant

Checks if the value of the field is CLEAR

Get enumerated values variant

Checks if the value of the field is CLEAR

Get enumerated values variant

Checks if the value of the field is CLEAR

Get enumerated values variant

Checks if the value of the field is CLEAR

Bit 6 - Clear late frame synchronization detection flag

Bit 5 - Clear anticipated frame synchronization detection flag

Bit 4 - Clear codec not ready flag

Bit 2 - Clear wrong clock configuration flag

Bit 1 - Mute detection flag

Bit 0 - Clear overrun / underrun

Bits 0:31 - Data

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is EDGEALIGNED

Checks if the value of the field is CENTERALIGNED1

Checks if the value of the field is CENTERALIGNED2

Checks if the value of the field is CENTERALIGNED3

Get enumerated values variant

Checks if the value of the field is UP

Checks if the value of the field is DOWN

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ANYEVENT

Checks if the value of the field is COUNTERONLY

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bits 8:9 - Clock division

Bit 7 - Auto-reload preload enable

Bits 5:6 - Center-aligned mode selection

Bit 4 - Direction

Bit 3 - One-pulse mode

Bit 2 - Update request source

Bit 1 - Update disable

Bit 0 - Counter enable

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is XOR

Get enumerated values variant

Checks if the value of the field is RESET

Checks if the value of the field is ENABLE

Checks if the value of the field is UPDATE

Checks if the value of the field is COMPAREPULSE

Checks if the value of the field is COMPAREOC1

Checks if the value of the field is COMPAREOC2

Checks if the value of the field is COMPAREOC3

Checks if the value of the field is COMPAREOC4

Get enumerated values variant

Checks if the value of the field is ONCOMPARE

Checks if the value of the field is ONUPDATE

Bit 7 - TI1 selection

Bits 4:6 - Master mode selection

Bit 3 - Capture/compare DMA selection

Get enumerated values variant

Checks if the value of the field is NOTINVERTED

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Checks if the value of the field is DIV8

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is NOSYNC

Checks if the value of the field is SYNC

Get enumerated values variant

Checks if the value of the field is ITR0

Checks if the value of the field is ITR1

Checks if the value of the field is ITR2

Checks if the value of the field is TI1F_ED

Checks if the value of the field is TI1FP1

Checks if the value of the field is TI2FP2

Checks if the value of the field is ETRF

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENCODER_MODE_1

Checks if the value of the field is ENCODER_MODE_2

Checks if the value of the field is ENCODER_MODE_3

Checks if the value of the field is RESET_MODE

Checks if the value of the field is GATED_MODE

Checks if the value of the field is TRIGGER_MODE

Checks if the value of the field is EXT_CLOCK_MODE

Bit 15 - External trigger polarity

Bit 14 - External clock enable

Bits 12:13 - External trigger prescaler

Bits 8:11 - External trigger filter

Bit 7 - Master/Slave mode

Bits 4:6 - Trigger selection

Bits 0:2 - Slave mode selection

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Trigger DMA request enable

Bit 13 - COM DMA request enable

Bit 12 - Capture/Compare 4 DMA request enable

Bit 11 - Capture/Compare 3 DMA request enable

Bit 10 - Capture/Compare 2 DMA request enable

Bit 9 - Capture/Compare 1 DMA request enable

Bit 8 - Update DMA request enable

Bit 6 - Trigger interrupt enable

Bit 4 - Capture/Compare 4 interrupt enable

Bit 3 - Capture/Compare 3 interrupt enable

Bit 2 - Capture/Compare 2 interrupt enable

Bit 1 - Capture/Compare 1 interrupt enable

Bit 0 - Update interrupt enable

Get enumerated values variant

Checks if the value of the field is OVERCAPTURE

Get enumerated values variant

Checks if the value of the field is NOTRIGGER

Checks if the value of the field is TRIGGER

Get enumerated values variant

[src]
pub fn is_match_(&self) -> bool

Checks if the value of the field is MATCH

Get enumerated values variant

Checks if the value of the field is CLEAR

Checks if the value of the field is UPDATEPENDING

Bit 12 - Capture/Compare 4 overcapture flag

Bit 11 - Capture/Compare 3 overcapture flag

Bit 10 - Capture/compare 2 overcapture flag

Bit 9 - Capture/Compare 1 overcapture flag

Bit 6 - Trigger interrupt flag

Bit 4 - Capture/Compare 4 interrupt flag

Bit 3 - Capture/Compare 3 interrupt flag

Bit 2 - Capture/Compare 2 interrupt flag

Bit 1 - Capture/compare 1 interrupt flag

Bit 0 - Update interrupt flag

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output compare 2 clear enable

Bits 12:14 - Output compare 2 mode

Bit 11 - Output compare 2 preload enable

Bit 10 - Output compare 2 fast enable

Bits 8:9 - Capture/Compare 2 selection

Bit 7 - Output compare 1 clear enable

Bits 4:6 - Output compare 1 mode

Bit 3 - Output compare 1 preload enable

Bit 2 - Output compare 1 fast enable

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is TI2

Checks if the value of the field is TI1

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is TI1

Checks if the value of the field is TI2

Checks if the value of the field is TRC

Bits 12:15 - Input capture 2 filter

Bits 10:11 - Input capture 2 prescaler

Bits 8:9 - Capture/compare 2 selection

Bits 4:7 - Input capture 1 filter

Bits 2:3 - Input capture 1 prescaler

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output compare 4 clear enable

Bits 12:14 - Output compare 4 mode

Bit 11 - Output compare 4 preload enable

Bit 10 - Output compare 4 fast enable

Bits 8:9 - Capture/Compare 4 selection

Bit 7 - Output compare 3 clear enable

Bits 4:6 - Output compare 3 mode

Bit 3 - Output compare 3 preload enable

Bit 2 - Output compare 3 fast enable

Bits 0:1 - Capture/Compare 3 selection

Get enumerated values variant

Checks if the value of the field is TI4

Checks if the value of the field is TI3

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is TI3

Checks if the value of the field is TI4

Checks if the value of the field is TRC

Bits 12:15 - Input capture 4 filter

Bits 10:11 - Input capture 4 prescaler

Bits 8:9 - Capture/Compare 4 selection

Bits 4:7 - Input capture 3 filter

Bits 2:3 - Input capture 3 prescaler

Bits 0:1 - Capture/Compare 3 selection

Bit 15 - Capture/Compare 4 output Polarity

Bit 13 - Capture/Compare 3 output Polarity

Bit 12 - Capture/Compare 4 output enable

Bit 11 - Capture/Compare 3 output Polarity

Bit 9 - Capture/Compare 3 output Polarity

Bit 8 - Capture/Compare 3 output enable

Bit 7 - Capture/Compare 2 output Polarity

Bit 5 - Capture/Compare 2 output Polarity

Bit 4 - Capture/Compare 2 output enable

Bit 3 - Capture/Compare 1 output Polarity

Bit 1 - Capture/Compare 1 output Polarity

Bit 0 - Capture/Compare 1 output enable

Bits 0:31 - Counter value

Bits 0:15 - Prescaler value

Bits 0:31 - Auto-reload value

Bits 0:31 - Capture/Compare 1 value

Bits 8:12 - DMA burst length

Bits 0:4 - DMA base address

Bits 0:15 - DMA register for burst accesses

Bits 0:2 - Timer2 ETR remap

Bits 3:4 - Internal trigger

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is ANYEVENT

Checks if the value of the field is COUNTERONLY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Bit 0 - Counter enable

Bit 1 - Update disable

Bit 2 - Update request source

Bit 3 - One-pulse mode

Bit 7 - Auto-reload preload enable

Bits 8:9 - Clock division

Bit 11 - UIF status bit remapping

Bit 9 - Output Idle state 1

Bit 8 - Output Idle state 1

Bit 3 - Capture/compare DMA selection

Bit 2 - Capture/compare control update selection

Bit 0 - Capture/compare preloaded control

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Trigger DMA request enable

Bit 13 - COM DMA request enable

Bit 9 - Capture/Compare 1 DMA request enable

Bit 8 - Update DMA request enable

Bit 7 - Break interrupt enable

Bit 6 - Trigger interrupt enable

Bit 5 - COM interrupt enable

Bit 1 - Capture/Compare 1 interrupt enable

Bit 0 - Update interrupt enable

Get enumerated values variant

Checks if the value of the field is CLEAR

Checks if the value of the field is UPDATEPENDING

Bit 9 - Capture/Compare 1 overcapture flag

Bit 7 - Break interrupt flag

Bit 6 - Trigger interrupt flag

Bit 5 - COM interrupt flag

Bit 1 - Capture/compare 1 interrupt flag

Bit 0 - Update interrupt flag

Bit 16 - Output Compare 1 mode

Bits 4:6 - Output Compare 1 mode

Bit 3 - Output Compare 1 preload enable

Bit 2 - Output Compare 1 fast enable

Bits 0:1 - Capture/Compare 1 selection

Bits 4:7 - Input capture 1 filter

Bits 2:3 - Input capture 1 prescaler

Bits 0:1 - Capture/Compare 1 selection

Bit 3 - Capture/Compare 1 output Polarity

Bit 2 - Capture/Compare 1 complementary output enable

Bit 1 - Capture/Compare 1 output Polarity

Bit 0 - Capture/Compare 1 output enable

Bits 0:15 - counter value

Bit 31 - UIF Copy

Bits 0:15 - Prescaler value

Bits 0:15 - Auto-reload value

Bits 0:7 - Repetition counter value

Bits 0:15 - Capture/Compare 1 value

Bits 0:7 - Dead-time generator setup

Bits 8:9 - Lock configuration

Bit 10 - Off-state selection for Idle mode

Bit 11 - Off-state selection for Run mode

Bit 12 - Break enable

Bit 13 - Break polarity

Bit 14 - Automatic output enable

Bit 15 - Main output enable

Bits 16:19 - Break filter

Bits 8:12 - DMA burst length

Bits 0:4 - DMA base address

Bits 0:15 - DMA register for burst accesses

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is ANYEVENT

Checks if the value of the field is COUNTERONLY

Get enumerated values variant

Checks if the value of the field is NOTSTOPPED

Checks if the value of the field is STOPPED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Bit 0 - Counter enable

Bit 1 - Update disable

Bit 2 - Update request source

Bit 3 - One-pulse mode

Bit 7 - Auto-reload preload enable

Bits 8:9 - Clock division

Bit 11 - UIF status bit remapping

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is HIGH

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is HIGH

Get enumerated values variant

Checks if the value of the field is ONCOMPARE

Checks if the value of the field is ONUPDATE

Get enumerated values variant

Checks if the value of the field is DEFAULT

Checks if the value of the field is WITHRISINGEDGE

Get enumerated values variant

Checks if the value of the field is NOTPRELOADED

Checks if the value of the field is PRELOADED

Bit 9 - Output Idle state 1

Bit 8 - Output Idle state 1

Bit 3 - Capture/compare DMA selection

Bit 2 - Capture/compare control update selection

Bit 0 - Capture/compare preloaded control

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Trigger DMA request enable

Bit 13 - COM DMA request enable

Bit 9 - Capture/Compare 1 DMA request enable

Bit 8 - Update DMA request enable

Bit 7 - Break interrupt enable

Bit 6 - Trigger interrupt enable

Bit 5 - COM interrupt enable

Bit 1 - Capture/Compare 1 interrupt enable

Bit 0 - Update interrupt enable

Get enumerated values variant

Checks if the value of the field is CLEAR

Checks if the value of the field is UPDATEPENDING

Bit 9 - Capture/Compare 1 overcapture flag

Bit 7 - Break interrupt flag

Bit 6 - Trigger interrupt flag

Bit 5 - COM interrupt flag

Bit 1 - Capture/compare 1 interrupt flag

Bit 0 - Update interrupt flag

Bit 16 - Output Compare 1 mode

Bits 4:6 - Output Compare 1 mode

Bit 3 - Output Compare 1 preload enable

Bit 2 - Output Compare 1 fast enable

Bits 0:1 - Capture/Compare 1 selection

Bits 4:7 - Input capture 1 filter

Bits 2:3 - Input capture 1 prescaler

Bits 0:1 - Capture/Compare 1 selection

Bit 3 - Capture/Compare 1 output Polarity

Bit 2 - Capture/Compare 1 complementary output enable

Bit 1 - Capture/Compare 1 output Polarity

Bit 0 - Capture/Compare 1 output enable

Bits 0:15 - counter value

Bit 31 - UIF Copy

Bits 0:15 - Prescaler value

Bits 0:15 - Auto-reload value

Bits 0:7 - Repetition counter value

Bits 0:15 - Capture/Compare 1 value

Bits 0:7 - Dead-time generator setup

Bits 8:9 - Lock configuration

Bit 10 - Off-state selection for Idle mode

Bit 11 - Off-state selection for Run mode

Bit 12 - Break enable

Bit 13 - Break polarity

Bit 14 - Automatic output enable

Bit 15 - Main output enable

Bits 16:19 - Break filter

Bits 8:12 - DMA burst length

Bits 0:4 - DMA base address

Bits 0:15 - DMA register for burst accesses

Bits 0:1 - Input capture 1 remap

Bit 0 - BRK BKIN input enable

Bit 1 - BRK COMP1 enable

Bit 2 - BRK COMP2 enable

Bit 8 - BRK DFSDM_BREAK1 enable

Bit 9 - BRK BKIN input polarity

Bit 10 - BRK COMP1 input polarity

Bit 11 - BRK COMP2 input polarit

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is EDGEALIGNED

Checks if the value of the field is CENTERALIGNED1

Checks if the value of the field is CENTERALIGNED2

Checks if the value of the field is CENTERALIGNED3

Get enumerated values variant

Checks if the value of the field is UP

Checks if the value of the field is DOWN

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ANYEVENT

Checks if the value of the field is COUNTERONLY

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bits 8:9 - Clock division

Bit 7 - Auto-reload preload enable

Bits 5:6 - Center-aligned mode selection

Bit 4 - Direction

Bit 3 - One-pulse mode

Bit 2 - Update request source

Bit 1 - Update disable

Bit 0 - Counter enable

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is XOR

Get enumerated values variant

Checks if the value of the field is RESET

Checks if the value of the field is ENABLE

Checks if the value of the field is UPDATE

Checks if the value of the field is COMPAREPULSE

Checks if the value of the field is COMPAREOC1

Checks if the value of the field is COMPAREOC2

Checks if the value of the field is COMPAREOC3

Checks if the value of the field is COMPAREOC4

Get enumerated values variant

Checks if the value of the field is ONCOMPARE

Checks if the value of the field is ONUPDATE

Bit 14 - Output Idle state 4

Bit 13 - Output Idle state 3

Bit 12 - Output Idle state 3

Bit 11 - Output Idle state 2

Bit 10 - Output Idle state 2

Bit 9 - Output Idle state 1

Bit 8 - Output Idle state 1

Bit 7 - TI1 selection

Bits 4:6 - Master mode selection

Bit 3 - Capture/compare DMA selection

Bit 2 - Capture/compare control update selection

Bit 0 - Capture/compare preloaded control

Get enumerated values variant

Checks if the value of the field is NOTINVERTED

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Checks if the value of the field is DIV8

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is NOSYNC

Checks if the value of the field is SYNC

Get enumerated values variant

Checks if the value of the field is ITR0

Checks if the value of the field is ITR1

Checks if the value of the field is ITR2

Checks if the value of the field is TI1F_ED

Checks if the value of the field is TI1FP1

Checks if the value of the field is TI2FP2

Checks if the value of the field is ETRF

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENCODER_MODE_1

Checks if the value of the field is ENCODER_MODE_2

Checks if the value of the field is ENCODER_MODE_3

Checks if the value of the field is RESET_MODE

Checks if the value of the field is GATED_MODE

Checks if the value of the field is TRIGGER_MODE

Checks if the value of the field is EXT_CLOCK_MODE

Bit 15 - External trigger polarity

Bit 14 - External clock enable

Bits 12:13 - External trigger prescaler

Bits 8:11 - External trigger filter

Bit 7 - Master/Slave mode

Bits 4:6 - Trigger selection

Bits 0:2 - Slave mode selection

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Trigger DMA request enable

Bit 13 - COM DMA request enable

Bit 12 - Capture/Compare 4 DMA request enable

Bit 11 - Capture/Compare 3 DMA request enable

Bit 10 - Capture/Compare 2 DMA request enable

Bit 9 - Capture/Compare 1 DMA request enable

Bit 8 - Update DMA request enable

Bit 6 - Trigger interrupt enable

Bit 4 - Capture/Compare 4 interrupt enable

Bit 3 - Capture/Compare 3 interrupt enable

Bit 2 - Capture/Compare 2 interrupt enable

Bit 1 - Capture/Compare 1 interrupt enable

Bit 0 - Update interrupt enable

Bit 7 - Break interrupt enable

Bit 5 - COM interrupt enable

Get enumerated values variant

Checks if the value of the field is OVERCAPTURE

Get enumerated values variant

Checks if the value of the field is NOTRIGGER

Checks if the value of the field is TRIGGER

Get enumerated values variant

[src]
pub fn is_match_(&self) -> bool

Checks if the value of the field is MATCH

Get enumerated values variant

Checks if the value of the field is CLEAR

Checks if the value of the field is UPDATEPENDING

Bit 12 - Capture/Compare 4 overcapture flag

Bit 11 - Capture/Compare 3 overcapture flag

Bit 10 - Capture/compare 2 overcapture flag

Bit 9 - Capture/Compare 1 overcapture flag

Bit 7 - Break interrupt flag

Bit 6 - Trigger interrupt flag

Bit 5 - COM interrupt flag

Bit 4 - Capture/Compare 4 interrupt flag

Bit 3 - Capture/Compare 3 interrupt flag

Bit 2 - Capture/Compare 2 interrupt flag

Bit 1 - Capture/compare 1 interrupt flag

Bit 0 - Update interrupt flag

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output Compare 2 clear enable

Bits 12:14 - Output Compare 2 mode

Bit 11 - Output Compare 2 preload enable

Bit 10 - Output Compare 2 fast enable

Bits 8:9 - Capture/Compare 2 selection

Bit 7 - Output Compare 1 clear enable

Bits 4:6 - Output Compare 1 mode

Bit 3 - Output Compare 1 preload enable

Bit 2 - Output Compare 1 fast enable

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is TI2

Checks if the value of the field is TI1

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is TI1

Checks if the value of the field is TI2

Checks if the value of the field is TRC

Bits 12:15 - Input capture 2 filter

Bits 10:11 - Input capture 2 prescaler

Bits 8:9 - Capture/Compare 2 selection

Bits 4:7 - Input capture 1 filter

Bits 2:3 - Input capture 1 prescaler

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output compare 4 clear enable

Bits 12:14 - Output compare 4 mode

Bit 11 - Output compare 4 preload enable

Bit 10 - Output compare 4 fast enable

Bits 8:9 - Capture/Compare 4 selection

Bit 7 - Output compare 3 clear enable

Bits 4:6 - Output compare 3 mode

Bit 3 - Output compare 3 preload enable

Bit 2 - Output compare 3 fast enable

Bits 0:1 - Capture/Compare 3 selection

Get enumerated values variant

Checks if the value of the field is TI4

Checks if the value of the field is TI3

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is TI3

Checks if the value of the field is TI4

Checks if the value of the field is TRC

Bits 12:15 - Input capture 4 filter

Bits 10:11 - Input capture 4 prescaler

Bits 8:9 - Capture/Compare 4 selection

Bits 4:7 - Input capture 3 filter

Bits 2:3 - Input capture 3 prescaler

Bits 0:1 - Capture/compare 3 selection

Bit 13 - Capture/Compare 3 output Polarity

Bit 12 - Capture/Compare 4 output enable

Bit 11 - Capture/Compare 3 output Polarity

Bit 10 - Capture/Compare 3 complementary output enable

Bit 9 - Capture/Compare 3 output Polarity

Bit 8 - Capture/Compare 3 output enable

Bit 7 - Capture/Compare 2 output Polarity

Bit 6 - Capture/Compare 2 complementary output enable

Bit 5 - Capture/Compare 2 output Polarity

Bit 4 - Capture/Compare 2 output enable

Bit 3 - Capture/Compare 1 output Polarity

Bit 2 - Capture/Compare 1 complementary output enable

Bit 1 - Capture/Compare 1 output Polarity

Bit 0 - Capture/Compare 1 output enable

Bits 0:15 - counter value

Bits 0:15 - Prescaler value

Bits 0:15 - Auto-reload value

Bits 0:7 - Repetition counter value

Bits 0:15 - Capture/Compare 1 value

Get enumerated values variant

Checks if the value of the field is DISABLEDIDLE

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is IDLELEVEL

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is IDLELEVEL

Bit 15 - Main output enable

Bit 14 - Automatic output enable

Bit 13 - Break polarity

Bit 12 - Break enable

Bit 11 - Off-state selection for Run mode

Bit 10 - Off-state selection for Idle mode

Bits 8:9 - Lock configuration

Bits 0:7 - Dead-time generator setup

Bits 8:12 - DMA burst length

Bits 0:4 - DMA base address

Bits 0:15 - DMA register for burst accesses

Bits 0:1 - External trigger remap on ADC1 analog watchdog

Bits 2:3 - External trigger remap on ADC3 analog watchdog

Bit 4 - Input Capture 1 remap

Bit 24 - Output Compare 6 mode bit 3

Bits 16:18 - Output Compare 5 mode bit 3

Bit 15 - Output compare 6 clear enable

Bits 12:14 - Output compare 6 mode

Bit 11 - Output compare 6 preload enable

Bit 10 - Output compare 6 fast enable

Bit 7 - Output compare 5 clear enable

Bits 4:6 - Output compare 5 mode

Bit 3 - Output compare 5 preload enable

Bit 2 - Output compare 5 fast enable

Bits 0:15 - Capture/Compare value

Bit 29 - Group Channel 5 and Channel 1

Bit 30 - Group Channel 5 and Channel 2

Bit 31 - Group Channel 5 and Channel 3

Bits 0:15 - Capture/Compare value

Bit 0 - BRK BKIN input enable

Bit 1 - BRK COMP1 enable

Bit 2 - BRK COMP2 enable

Bit 8 - BRK DFSDM_BREAK0 enable

Bit 9 - BRK BKIN input polarity

Bit 10 - BRK COMP1 input polarity

Bit 11 - BRK COMP2 input polarity

Bits 14:16 - ETR source selection

Bit 0 - BRK2 BKIN input enable

Bit 1 - BRK2 COMP1 enable

Bit 2 - BRK2 COMP2 enable

Bit 8 - BRK2 DFSDM_BREAK0 enable

Bit 9 - BRK2 BKIN input polarity

Bit 10 - BRK2 COMP1 input polarity

Bit 11 - BRK2 COMP2 input polarity

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ANYEVENT

Checks if the value of the field is COUNTERONLY

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 7 - Auto-reload preload enable

Bit 3 - One-pulse mode

Bit 2 - Update request source

Bit 1 - Update disable

Bit 0 - Counter enable

Get enumerated values variant

Checks if the value of the field is RESET

Checks if the value of the field is ENABLE

Checks if the value of the field is UPDATE

Bits 4:6 - Master mode selection

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 8 - Update DMA request enable

Bit 0 - Update interrupt enable

Get enumerated values variant

Checks if the value of the field is CLEAR

Checks if the value of the field is UPDATEPENDING

Bit 0 - Update interrupt flag

Bits 0:15 - Low counter value

Bits 0:15 - Prescaler value

Bits 0:15 - Low Auto-reload value

Bit 6 - Counter direction change up to down

Bit 5 - Counter direction change down to up

Bit 4 - Autoreload register update OK

Bit 3 - Compare register update OK

Bit 2 - External trigger edge event

Bit 1 - Autoreload match

Bit 0 - Compare match

Bit 6 - Direction change to down Interrupt Enable

Bit 5 - Direction change to UP Interrupt Enable

Bit 4 - Autoreload register update OK Interrupt Enable

Bit 3 - Compare register update OK Interrupt Enable

Bit 2 - External trigger valid edge Interrupt Enable

Bit 1 - Autoreload match Interrupt Enable

Bit 0 - Compare match Interrupt Enable

Bit 24 - Encoder mode enable

Bit 23 - counter mode enabled

Bit 22 - Registers update mode

Bit 21 - Waveform shape polarity

Bit 20 - Waveform shape

Bit 19 - Timeout enable

Bits 17:18 - Trigger enable and polarity

Bits 13:15 - Trigger selector

Bits 9:11 - Clock prescaler

Bits 6:7 - Configurable digital filter for trigger

Bits 3:4 - Configurable digital filter for external clock

Bits 1:2 - Clock Polarity

Bit 0 - Clock selector

Bit 2 - Timer start in continuous mode

Bit 1 - LPTIM start in single mode

Bit 0 - LPTIM Enable

Bits 0:15 - Compare value

Bits 0:15 - Auto reload value

Bits 0:15 - Counter value

Get enumerated values variant

Checks if the value of the field is M0

Checks if the value of the field is BIT7

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OVERSAMPLING16

Checks if the value of the field is OVERSAMPLING8

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is BIT8

Checks if the value of the field is BIT9

Get enumerated values variant

Checks if the value of the field is IDLE

Checks if the value of the field is ADDRESS

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is EVEN

Checks if the value of the field is ODD

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 28 - Word length

Bit 27 - End of Block interrupt enable

Bit 26 - Receiver timeout interrupt enable

Bit 15 - Oversampling mode

Bit 14 - Character match interrupt enable

Bit 13 - Mute mode enable

Bit 12 - Word length

Bit 11 - Receiver wakeup method

Bit 10 - Parity control enable

Bit 9 - Parity selection

Bit 8 - PE interrupt enable

Bit 7 - interrupt enable

Bit 6 - Transmission complete interrupt enable

Bit 5 - RXNE interrupt enable

Bit 4 - IDLE interrupt enable

Bit 3 - Transmitter enable

Bit 2 - Receiver enable

Bit 1 - USART enable in Stop mode

Bit 0 - USART enable

Bits 16:20 - Driver Enable de-assertion time

Bits 21:25 - Driver Enable assertion time

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LSB

Checks if the value of the field is MSB

Get enumerated values variant

Checks if the value of the field is POSITIVE

Checks if the value of the field is NEGATIVE

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is SWAPPED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is STOP1

Checks if the value of the field is STOP0P5

Checks if the value of the field is STOP2

Checks if the value of the field is STOP1P5

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is HIGH

Get enumerated values variant

Checks if the value of the field is FIRST

Checks if the value of the field is SECOND

Get enumerated values variant

Checks if the value of the field is NOTOUTPUT

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is BIT10

Checks if the value of the field is BIT11

Get enumerated values variant

Checks if the value of the field is BIT4

Checks if the value of the field is BIT7

Get enumerated values variant

Checks if the value of the field is START

Checks if the value of the field is EDGE

Checks if the value of the field is FRAME7F

Checks if the value of the field is FRAME55

Bit 23 - Receiver timeout enable

Bit 20 - Auto baud rate enable

Bit 19 - Most significant bit first

Bit 18 - Binary data inversion

Bit 17 - TX pin active level inversion

Bit 16 - RX pin active level inversion

Bit 15 - Swap TX/RX pins

Bit 14 - LIN mode enable

Bits 12:13 - STOP bits

Bit 11 - Clock enable

Bit 10 - Clock polarity

Bit 9 - Clock phase

Bit 8 - Last bit clock pulse

Bit 6 - LIN break detection interrupt enable

Bit 5 - LIN break detection length

Bit 4 - 7-bit Address Detection/4-bit Address Detection

Bits 24:31 - Address of the USART node

Bits 21:22 - Auto baud rate mode

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ADDRESS

Checks if the value of the field is START

Checks if the value of the field is RXNE

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is NOTDISABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is SAMPLE3

Checks if the value of the field is SAMPLE1

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is NOTSELECTED

Checks if the value of the field is SELECTED

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is LOWPOWER

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 22 - Wakeup from Stop mode interrupt enable

Bits 20:21 - Wakeup from Stop mode interrupt flag selection

Bits 17:19 - Smartcard auto-retry count

Bit 15 - Driver enable polarity selection

Bit 14 - Driver enable mode

Bit 13 - DMA Disable on Reception Error

Bit 12 - Overrun Disable

Bit 11 - One sample bit method enable

Bit 10 - CTS interrupt enable

Bit 9 - CTS enable

Bit 8 - RTS enable

Bit 7 - DMA enable transmitter

Bit 6 - DMA enable receiver

Bit 5 - Smartcard mode enable

Bit 4 - Smartcard NACK enable

Bit 3 - Half-duplex selection

Bit 2 - Ir low-power

Bit 1 - Ir mode enable

Bit 0 - Error interrupt enable

Bits 0:15 - DIV_Mantissa

Bits 8:15 - Guard time value

Bits 0:7 - Prescaler value

Bits 24:31 - Block Length

Bits 0:23 - Receiver timeout value

Bit 22 - REACK

Bit 21 - TEACK

Bit 20 - WUF

Bit 19 - RWU

Bit 18 - SBKF

Bit 17 - CMF

Bit 16 - BUSY

Bit 15 - ABRF

Bit 14 - ABRE

Bit 12 - EOBF

Bit 11 - RTOF

Bit 10 - CTS

Bit 9 - CTSIF

Bit 8 - LBDF

Bit 7 - TXE

Bit 6 - TC

Bit 5 - RXNE

Bit 4 - IDLE

Bit 3 - ORE

Bit 2 - NF

Bit 1 - FE

Bit 0 - PE

Bits 0:8 - Receive data value

Bits 0:8 - Transmit data value

Get enumerated values variant

Checks if the value of the field is M0

Checks if the value of the field is BIT7

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OVERSAMPLING16

Checks if the value of the field is OVERSAMPLING8

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is BIT8

Checks if the value of the field is BIT9

Get enumerated values variant

Checks if the value of the field is IDLE

Checks if the value of the field is ADDRESS

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is EVEN

Checks if the value of the field is ODD

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 28 - Word length

Bit 27 - End of Block interrupt enable

Bit 26 - Receiver timeout interrupt enable

Bit 15 - Oversampling mode

Bit 14 - Character match interrupt enable

Bit 13 - Mute mode enable

Bit 12 - Word length

Bit 11 - Receiver wakeup method

Bit 10 - Parity control enable

Bit 9 - Parity selection

Bit 8 - PE interrupt enable

Bit 7 - interrupt enable

Bit 6 - Transmission complete interrupt enable

Bit 5 - RXNE interrupt enable

Bit 4 - IDLE interrupt enable

Bit 3 - Transmitter enable

Bit 2 - Receiver enable

Bit 1 - USART enable in Stop mode

Bit 0 - USART enable

Bits 16:20 - Driver Enable de-assertion time

Bits 21:25 - Driver Enable assertion time

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LSB

Checks if the value of the field is MSB

Get enumerated values variant

Checks if the value of the field is POSITIVE

Checks if the value of the field is NEGATIVE

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is SWAPPED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is STOP1

Checks if the value of the field is STOP0P5

Checks if the value of the field is STOP2

Checks if the value of the field is STOP1P5

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is HIGH

Get enumerated values variant

Checks if the value of the field is FIRST

Checks if the value of the field is SECOND

Get enumerated values variant

Checks if the value of the field is NOTOUTPUT

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is BIT10

Checks if the value of the field is BIT11

Get enumerated values variant

Checks if the value of the field is BIT4

Checks if the value of the field is BIT7

Get enumerated values variant

Checks if the value of the field is START

Checks if the value of the field is EDGE

Checks if the value of the field is FRAME7F

Checks if the value of the field is FRAME55

Bit 23 - Receiver timeout enable

Bit 20 - Auto baud rate enable

Bit 19 - Most significant bit first

Bit 18 - Binary data inversion

Bit 17 - TX pin active level inversion

Bit 16 - RX pin active level inversion

Bit 15 - Swap TX/RX pins

Bit 14 - LIN mode enable

Bits 12:13 - STOP bits

Bit 11 - Clock enable

Bit 10 - Clock polarity

Bit 9 - Clock phase

Bit 8 - Last bit clock pulse

Bit 6 - LIN break detection interrupt enable

Bit 5 - LIN break detection length

Bit 4 - 7-bit Address Detection/4-bit Address Detection

Bits 24:31 - Address of the USART node

Bits 21:22 - Auto baud rate mode

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ADDRESS

Checks if the value of the field is START

Checks if the value of the field is RXNE

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is NOTDISABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is SAMPLE3

Checks if the value of the field is SAMPLE1

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is NOTSELECTED

Checks if the value of the field is SELECTED

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is LOWPOWER

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 22 - Wakeup from Stop mode interrupt enable

Bits 20:21 - Wakeup from Stop mode interrupt flag selection

Bits 17:19 - Smartcard auto-retry count

Bit 15 - Driver enable polarity selection

Bit 14 - Driver enable mode

Bit 13 - DMA Disable on Reception Error

Bit 12 - Overrun Disable

Bit 11 - One sample bit method enable

Bit 10 - CTS interrupt enable

Bit 9 - CTS enable

Bit 8 - RTS enable

Bit 7 - DMA enable transmitter

Bit 6 - DMA enable receiver

Bit 5 - Smartcard mode enable

Bit 4 - Smartcard NACK enable

Bit 3 - Half-duplex selection

Bit 2 - Ir low-power

Bit 1 - Ir mode enable

Bit 0 - Error interrupt enable

Bit 23 - USART Clock Enable in Stop mode

Bit 24 - Transmission complete before guard time interrupt enable

Bits 0:11 - USARTDIV

Bits 8:15 - Guard time value

Bits 0:7 - Prescaler value

Bits 24:31 - Block Length

Bits 0:23 - Receiver timeout value

Get enumerated values variant

Checks if the value of the field is NOTCOMPLETED

Checks if the value of the field is COMPLETED

Bit 22 - REACK

Bit 21 - TEACK

Bit 20 - WUF

Bit 19 - RWU

Bit 18 - SBKF

Bit 17 - CMF

Bit 16 - BUSY

Bit 15 - ABRF

Bit 14 - ABRE

Bit 12 - EOBF

Bit 11 - RTOF

Bit 10 - CTS

Bit 9 - CTSIF

Bit 8 - LBDF

Bit 7 - TXE

Bit 6 - TC

Bit 5 - RXNE

Bit 4 - IDLE

Bit 3 - ORE

Bit 2 - NF

Bit 1 - FE

Bit 0 - PE

Bit 25 - Transmission complete before guard time completion

Bits 0:8 - Receive data value

Bits 0:8 - Transmit data value

Get enumerated values variant

Checks if the value of the field is M0

Checks if the value of the field is BIT7

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is BIT8

Checks if the value of the field is BIT9

Get enumerated values variant

Checks if the value of the field is IDLE

Checks if the value of the field is ADDRESS

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is EVEN

Checks if the value of the field is ODD

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 28 - Word length

Bit 14 - Character match interrupt enable

Bit 13 - Mute mode enable

Bit 12 - Word length

Bit 11 - Receiver wakeup method

Bit 10 - Parity control enable

Bit 9 - Parity selection

Bit 8 - PE interrupt enable

Bit 7 - interrupt enable

Bit 6 - Transmission complete interrupt enable

Bit 5 - RXNE interrupt enable

Bit 4 - IDLE interrupt enable

Bit 3 - Transmitter enable

Bit 2 - Receiver enable

Bit 1 - USART enable in Stop mode

Bit 0 - USART enable

Bits 21:25 - Driver Enable assertion time

Bits 16:20 - Driver Enable de-assertion time

Get enumerated values variant

Checks if the value of the field is LSB

Checks if the value of the field is MSB

Get enumerated values variant

Checks if the value of the field is POSITIVE

Checks if the value of the field is NEGATIVE

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is SWAPPED

Get enumerated values variant

Checks if the value of the field is STOP1

Checks if the value of the field is STOP0P5

Checks if the value of the field is STOP2

Checks if the value of the field is STOP1P5

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is BIT4

Checks if the value of the field is BIT7

Bit 19 - Most significant bit first

Bit 18 - Binary data inversion

Bit 17 - TX pin active level inversion

Bit 16 - RX pin active level inversion

Bit 15 - Swap TX/RX pins

Bits 12:13 - STOP bits

Bit 11 - Clock enable

Bit 4 - 7-bit Address Detection/4-bit Address Detection

Bits 24:31 - Address of the USART node

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ADDRESS

Checks if the value of the field is START

Checks if the value of the field is RXNE

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is NOTDISABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is NOTSELECTED

Checks if the value of the field is SELECTED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 22 - Wakeup from Stop mode interrupt enable

Bits 20:21 - Wakeup from Stop mode interrupt flag selection

Bit 15 - Driver enable polarity selection

Bit 14 - Driver enable mode

Bit 13 - DMA Disable on Reception Error

Bit 12 - Overrun Disable

Bit 10 - CTS interrupt enable

Bit 9 - CTS enable

Bit 8 - RTS enable

Bit 7 - DMA enable transmitter

Bit 6 - DMA enable receiver

Bit 3 - Half-duplex selection

Bit 0 - Error interrupt enable

Bits 0:19 - BRR

Bit 22 - REACK

Bit 21 - TEACK

Bit 20 - WUF

Bit 19 - RWU

Bit 18 - SBKF

Bit 17 - CMF

Bit 16 - BUSY

Bit 10 - CTS

Bit 9 - CTSIF

Bit 7 - TXE

Bit 6 - TC

Bit 5 - RXNE

Bit 4 - IDLE

Bit 3 - ORE

Bit 2 - NF

Bit 1 - FE

Bit 0 - PE

Bits 0:8 - Receive data value

Bits 0:8 - Transmit data value

Get enumerated values variant

Checks if the value of the field is UNIDIRECTIONAL

Checks if the value of the field is BIDIRECTIONAL

Get enumerated values variant

Checks if the value of the field is OUTPUTDISABLED

Checks if the value of the field is OUTPUTENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is TXBUFFER

Checks if the value of the field is CRC

Get enumerated values variant

Checks if the value of the field is FULLDUPLEX

Checks if the value of the field is OUTPUTDISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is SLAVESELECTED

Checks if the value of the field is SLAVENOTSELECTED

Get enumerated values variant

Checks if the value of the field is MSBFIRST

Checks if the value of the field is LSBFIRST

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Checks if the value of the field is DIV8

Checks if the value of the field is DIV16

Checks if the value of the field is DIV32

Checks if the value of the field is DIV64

Checks if the value of the field is DIV128

Checks if the value of the field is DIV256

Get enumerated values variant

Checks if the value of the field is SLAVE

Checks if the value of the field is MASTER

Get enumerated values variant

Checks if the value of the field is IDLELOW

Checks if the value of the field is IDLEHIGH

Get enumerated values variant

Checks if the value of the field is FIRSTEDGE

Checks if the value of the field is SECONDEDGE

Bit 15 - Bidirectional data mode enable

Bit 14 - Output enable in bidirectional mode

Bit 13 - Hardware CRC calculation enable

Bit 12 - CRC transfer next

Bit 11 - CRC length

Bit 10 - Receive only

Bit 9 - Software slave management

Bit 8 - Internal slave select

Bit 7 - Frame format

Bit 6 - SPI enable

Bits 3:5 - Baud rate control

Bit 2 - Master selection

Bit 1 - Clock polarity

Bit 0 - Clock phase

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is MASKED

Checks if the value of the field is NOTMASKED

Get enumerated values variant

Checks if the value of the field is MASKED

Checks if the value of the field is NOTMASKED

Get enumerated values variant

Checks if the value of the field is MASKED

Checks if the value of the field is NOTMASKED

Bit 0 - Rx buffer DMA enable

Bit 1 - Tx buffer DMA enable

Bit 2 - SS output enable

Bit 3 - NSS pulse management

Bit 4 - Frame format

Bit 5 - Error interrupt enable

Bit 6 - RX buffer not empty interrupt enable

Bit 7 - Tx buffer empty interrupt enable

Bits 8:11 - Data size

Bit 12 - FIFO reception threshold

Bit 13 - Last DMA transfer for reception

Bit 14 - Last DMA transfer for transmission

Get enumerated values variant

Checks if the value of the field is EMPTY

Checks if the value of the field is NOTEMPTY

Get enumerated values variant

Checks if the value of the field is NOTEMPTY

Checks if the value of the field is EMPTY

Get enumerated values variant

[src]
pub fn is_match_(&self) -> bool

Checks if the value of the field is MATCH

Checks if the value of the field is NOMATCH

Get enumerated values variant

Checks if the value of the field is NOFAULT

Checks if the value of the field is FAULT

Get enumerated values variant

Checks if the value of the field is NOOVERRUN

Checks if the value of the field is OVERRUN

Get enumerated values variant

Checks if the value of the field is NOTBUSY

Checks if the value of the field is BUSY

Bit 0 - Receive buffer not empty

Bit 1 - Transmit buffer empty

Bit 4 - CRC error flag

Bit 5 - Mode fault

Bit 6 - Overrun flag

Bit 7 - Busy flag

Bit 8 - Frame format error

Bits 9:10 - FIFO reception level

Bits 11:12 - FIFO transmission level

Bits 0:15 - Data register

Bits 0:15 - CRC polynomial register

Bits 0:15 - Rx CRC register

Bits 0:15 - Tx CRC register

Bits 0:1 - PWRCTRL

Bit 14 - HW Flow Control enable

Bit 13 - SDIO_CK dephasing selection bit

Bits 11:12 - Wide bus mode enable bit

Bit 10 - Clock divider bypass enable bit

Bit 9 - Power saving configuration bit

Bit 8 - Clock enable bit

Bits 0:7 - Clock divide factor

Bits 0:31 - Command argument

Bit 14 - CE-ATA command

Bit 13 - not Interrupt Enable

Bit 12 - Enable CMD completion

Bit 11 - SD I/O suspend command

Bit 10 - Command path state machine (CPSM) Enable bit

Bit 9 - CPSM Waits for ends of data transfer (CmdPend internal signal)

Bit 8 - CPSM waits for interrupt request

Bits 6:7 - Wait for response bits

Bits 0:5 - Command index

Bits 0:5 - Response command index

Bits 0:31 - see Table 132

Bits 0:31 - see Table 132

Bits 0:31 - see Table 132

Bits 0:31 - see Table 132

Bits 0:31 - Data timeout period

Bits 0:24 - Data length value

Bit 11 - SD I/O enable functions

Bit 10 - Read wait mode

Bit 9 - Read wait stop

Bit 8 - Read wait start

Bits 4:7 - Data block size

Bit 3 - DMA enable bit

Bit 2 - Data transfer mode selection 1: Stream or SDIO multibyte data transfer

Bit 1 - Data transfer direction selection

Bit 0 - DTEN

Bits 0:24 - Data count value

Bit 23 - CE-ATA command completion signal received for CMD61

Bit 22 - SDIO interrupt received

Bit 21 - Data available in receive FIFO

Bit 20 - Data available in transmit FIFO

Bit 19 - Receive FIFO empty

Bit 18 - Transmit FIFO empty

Bit 17 - Receive FIFO full

Bit 16 - Transmit FIFO full

Bit 15 - Receive FIFO half full: there are at least 8 words in the FIFO

Bit 14 - Transmit FIFO half empty: at least 8 words can be written into the FIFO

Bit 13 - Data receive in progress

Bit 12 - Data transmit in progress

Bit 11 - Command transfer in progress

Bit 10 - Data block sent/received (CRC check passed)

Bit 9 - Start bit not detected on all data signals in wide bus mode

Bit 8 - Data end (data counter, SDIDCOUNT, is zero)

Bit 7 - Command sent (no response required)

Bit 6 - Command response received (CRC check passed)

Bit 5 - Received FIFO overrun error

Bit 4 - Transmit FIFO underrun error

Bit 3 - Data timeout

Bit 2 - Command response timeout

Bit 1 - Data block sent/received (CRC check failed)

Bit 0 - Command response received (CRC check failed)

Bit 23 - CEATAEND flag clear bit

Bit 22 - SDIOIT flag clear bit

Bit 10 - DBCKEND flag clear bit

Bit 9 - STBITERR flag clear bit

Bit 8 - DATAEND flag clear bit

Bit 7 - CMDSENT flag clear bit

Bit 6 - CMDREND flag clear bit

Bit 5 - RXOVERR flag clear bit

Bit 4 - TXUNDERR flag clear bit

Bit 3 - DTIMEOUT flag clear bit

Bit 2 - CTIMEOUT flag clear bit

Bit 1 - DCRCFAIL flag clear bit

Bit 0 - CCRCFAIL flag clear bit

Bit 23 - CE-ATA command completion signal received interrupt enable

Bit 22 - SDIO mode interrupt received interrupt enable

Bit 21 - Data available in Rx FIFO interrupt enable

Bit 20 - Data available in Tx FIFO interrupt enable

Bit 19 - Rx FIFO empty interrupt enable

Bit 18 - Tx FIFO empty interrupt enable

Bit 17 - Rx FIFO full interrupt enable

Bit 16 - Tx FIFO full interrupt enable

Bit 15 - Rx FIFO half full interrupt enable

Bit 14 - Tx FIFO half empty interrupt enable

Bit 13 - Data receive acting interrupt enable

Bit 12 - Data transmit acting interrupt enable

Bit 11 - Command acting interrupt enable

Bit 10 - Data block end interrupt enable

Bit 9 - Start bit error interrupt enable

Bit 8 - Data end interrupt enable

Bit 7 - Command sent interrupt enable

Bit 6 - Command response received interrupt enable

Bit 5 - Rx FIFO overrun error interrupt enable

Bit 4 - Tx FIFO underrun error interrupt enable

Bit 3 - Data timeout interrupt enable

Bit 2 - Command timeout interrupt enable

Bit 1 - Data CRC fail interrupt enable

Bit 0 - Command CRC fail interrupt enable

Bits 0:23 - Remaining number of words to be written to or read from the FIFO

Bits 0:31 - Receive and transmit FIFO data

Get enumerated values variant

Checks if the value of the field is MASKED

Checks if the value of the field is UNMASKED

Bit 0 - Interrupt Mask on line 0

Bit 1 - Interrupt Mask on line 1

Bit 2 - Interrupt Mask on line 2

Bit 3 - Interrupt Mask on line 3

Bit 4 - Interrupt Mask on line 4

Bit 5 - Interrupt Mask on line 5

Bit 6 - Interrupt Mask on line 6

Bit 7 - Interrupt Mask on line 7

Bit 8 - Interrupt Mask on line 8

Bit 9 - Interrupt Mask on line 9

Bit 10 - Interrupt Mask on line 10

Bit 11 - Interrupt Mask on line 11

Bit 12 - Interrupt Mask on line 12

Bit 13 - Interrupt Mask on line 13

Bit 14 - Interrupt Mask on line 14

Bit 15 - Interrupt Mask on line 15

Bit 16 - Interrupt Mask on line 16

Bit 17 - Interrupt Mask on line 17

Bit 18 - Interrupt Mask on line 18

Bit 19 - Interrupt Mask on line 19

Bit 20 - Interrupt Mask on line 20

Bit 21 - Interrupt Mask on line 21

Bit 22 - Interrupt Mask on line 22

Bit 23 - Interrupt Mask on line 23

Bit 24 - Interrupt Mask on line 24

Bit 25 - Interrupt Mask on line 25

Bit 26 - Interrupt Mask on line 26

Bit 27 - Interrupt Mask on line 27

Bit 28 - Interrupt Mask on line 28

Bit 29 - Interrupt Mask on line 29

Bit 30 - Interrupt Mask on line 30

Bit 31 - Interrupt Mask on line 31

Get enumerated values variant

Checks if the value of the field is MASKED

Checks if the value of the field is UNMASKED

Bit 0 - Event Mask on line 0

Bit 1 - Event Mask on line 1

Bit 2 - Event Mask on line 2

Bit 3 - Event Mask on line 3

Bit 4 - Event Mask on line 4

Bit 5 - Event Mask on line 5

Bit 6 - Event Mask on line 6

Bit 7 - Event Mask on line 7

Bit 8 - Event Mask on line 8

Bit 9 - Event Mask on line 9

Bit 10 - Event Mask on line 10

Bit 11 - Event Mask on line 11

Bit 12 - Event Mask on line 12

Bit 13 - Event Mask on line 13

Bit 14 - Event Mask on line 14

Bit 15 - Event Mask on line 15

Bit 16 - Event Mask on line 16

Bit 17 - Event Mask on line 17

Bit 18 - Event Mask on line 18

Bit 19 - Event Mask on line 19

Bit 20 - Event Mask on line 20

Bit 21 - Event Mask on line 21

Bit 22 - Event Mask on line 22

Bit 23 - Event Mask on line 23

Bit 24 - Event Mask on line 24

Bit 25 - Event Mask on line 25

Bit 26 - Event Mask on line 26

Bit 27 - Event Mask on line 27

Bit 28 - Event Mask on line 28

Bit 29 - Event Mask on line 29

Bit 30 - Event Mask on line 30

Bit 31 - Event Mask on line 31

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 0 - Rising trigger event configuration of line 0

Bit 1 - Rising trigger event configuration of line 1

Bit 2 - Rising trigger event configuration of line 2

Bit 3 - Rising trigger event configuration of line 3

Bit 4 - Rising trigger event configuration of line 4

Bit 5 - Rising trigger event configuration of line 5

Bit 6 - Rising trigger event configuration of line 6

Bit 7 - Rising trigger event configuration of line 7

Bit 8 - Rising trigger event configuration of line 8

Bit 9 - Rising trigger event configuration of line 9

Bit 10 - Rising trigger event configuration of line 10

Bit 11 - Rising trigger event configuration of line 11

Bit 12 - Rising trigger event configuration of line 12

Bit 13 - Rising trigger event configuration of line 13

Bit 14 - Rising trigger event configuration of line 14

Bit 15 - Rising trigger event configuration of line 15

Bit 16 - Rising trigger event configuration of line 16

Bit 18 - Rising trigger event configuration of line 18

Bit 19 - Rising trigger event configuration of line 19

Bit 20 - Rising trigger event configuration of line 20

Bit 21 - Rising trigger event configuration of line 21

Bit 22 - Rising trigger event configuration of line 22

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 0 - Falling trigger event configuration of line 0

Bit 1 - Falling trigger event configuration of line 1

Bit 2 - Falling trigger event configuration of line 2

Bit 3 - Falling trigger event configuration of line 3

Bit 4 - Falling trigger event configuration of line 4

Bit 5 - Falling trigger event configuration of line 5

Bit 6 - Falling trigger event configuration of line 6

Bit 7 - Falling trigger event configuration of line 7

Bit 8 - Falling trigger event configuration of line 8

Bit 9 - Falling trigger event configuration of line 9

Bit 10 - Falling trigger event configuration of line 10

Bit 11 - Falling trigger event configuration of line 11

Bit 12 - Falling trigger event configuration of line 12

Bit 13 - Falling trigger event configuration of line 13

Bit 14 - Falling trigger event configuration of line 14

Bit 15 - Falling trigger event configuration of line 15

Bit 16 - Falling trigger event configuration of line 16

Bit 18 - Falling trigger event configuration of line 18

Bit 19 - Falling trigger event configuration of line 19

Bit 20 - Falling trigger event configuration of line 20

Bit 21 - Falling trigger event configuration of line 21

Bit 22 - Falling trigger event configuration of line 22

Get enumerated values variant

Checks if the value of the field is PEND

Bit 0 - Software Interrupt on line 0

Bit 1 - Software Interrupt on line 1

Bit 2 - Software Interrupt on line 2

Bit 3 - Software Interrupt on line 3

Bit 4 - Software Interrupt on line 4

Bit 5 - Software Interrupt on line 5

Bit 6 - Software Interrupt on line 6

Bit 7 - Software Interrupt on line 7

Bit 8 - Software Interrupt on line 8

Bit 9 - Software Interrupt on line 9

Bit 10 - Software Interrupt on line 10

Bit 11 - Software Interrupt on line 11

Bit 12 - Software Interrupt on line 12

Bit 13 - Software Interrupt on line 13

Bit 14 - Software Interrupt on line 14

Bit 15 - Software Interrupt on line 15

Bit 16 - Software Interrupt on line 16

Bit 18 - Software Interrupt on line 18

Bit 19 - Software Interrupt on line 19

Bit 20 - Software Interrupt on line 20

Bit 21 - Software Interrupt on line 21

Bit 22 - Software Interrupt on line 22

Get enumerated values variant

Checks if the value of the field is NOTPENDING

Checks if the value of the field is PENDING

Bit 0 - Pending bit 0

Bit 1 - Pending bit 1

Bit 2 - Pending bit 2

Bit 3 - Pending bit 3

Bit 4 - Pending bit 4

Bit 5 - Pending bit 5

Bit 6 - Pending bit 6

Bit 7 - Pending bit 7

Bit 8 - Pending bit 8

Bit 9 - Pending bit 9

Bit 10 - Pending bit 10

Bit 11 - Pending bit 11

Bit 12 - Pending bit 12

Bit 13 - Pending bit 13

Bit 14 - Pending bit 14

Bit 15 - Pending bit 15

Bit 16 - Pending bit 16

Bit 18 - Pending bit 18

Bit 19 - Pending bit 19

Bit 20 - Pending bit 20

Bit 21 - Pending bit 21

Bit 22 - Pending bit 22

Get enumerated values variant

Checks if the value of the field is MASKED

Checks if the value of the field is UNMASKED

Bit 0 - Interrupt Mask on external/internal line 32

Bit 1 - Interrupt Mask on external/internal line 33

Bit 2 - Interrupt Mask on external/internal line 34

Bit 3 - Interrupt Mask on external/internal line 35

Bit 4 - Interrupt Mask on external/internal line 36

Bit 5 - Interrupt Mask on external/internal line 37

Bit 6 - Interrupt Mask on external/internal line 38

Bit 7 - Interrupt Mask on external/internal line 39

Get enumerated values variant

Checks if the value of the field is MASKED

Checks if the value of the field is UNMASKED

Bit 0 - Event mask on external/internal line 32

Bit 1 - Event mask on external/internal line 33

Bit 2 - Event mask on external/internal line 34

Bit 3 - Event mask on external/internal line 35

Bit 4 - Event mask on external/internal line 36

Bit 5 - Event mask on external/internal line 37

Bit 6 - Event mask on external/internal line 38

Bit 7 - Event mask on external/internal line 39

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 3 - Rising trigger event configuration bit of line 35

Bit 4 - Rising trigger event configuration bit of line 36

Bit 5 - Rising trigger event configuration bit of line 37

Bit 6 - Rising trigger event configuration bit of line 38

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 3 - Falling trigger event configuration bit of line 35

Bit 4 - Falling trigger event configuration bit of line 36

Bit 5 - Falling trigger event configuration bit of line 37

Bit 6 - Falling trigger event configuration bit of line 38

Get enumerated values variant

Checks if the value of the field is PEND

Bit 3 - Software interrupt on line 35

Bit 4 - Software interrupt on line 36

Bit 5 - Software interrupt on line 37

Bit 6 - Software interrupt on line 38

Get enumerated values variant

Checks if the value of the field is NOTPENDING

Checks if the value of the field is PENDING

Bit 3 - Pending interrupt flag on line 35

Bit 4 - Pending interrupt flag on line 36

Bit 5 - Pending interrupt flag on line 37

Bit 6 - Pending interrupt flag on line 38

Bit 0 - Voltage reference buffer enable

Bit 1 - High impedance mode

Bit 2 - Voltage reference scale

Bit 3 - Voltage reference buffer ready

Bits 0:5 - Trimming code

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is EXTENDED

Get enumerated values variant

Checks if the value of the field is DATA

Checks if the value of the field is REMOTE

Bits 21:31 - STID

Bits 3:20 - EXID

Bit 2 - IDE

Bit 1 - RTR

Bit 0 - TXRQ

Bits 16:31 - TIME

Bit 8 - TGT

Bits 0:3 - DLC

Bits 24:31 - DATA3

Bits 16:23 - DATA2

Bits 8:15 - DATA1

Bits 0:7 - DATA0

Bits 24:31 - DATA7

Bits 16:23 - DATA6

Bits 8:15 - DATA5

Bits 0:7 - DATA4

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is EXTENDED

Get enumerated values variant

Checks if the value of the field is DATA

Checks if the value of the field is REMOTE

Bits 21:31 - STID

Bits 3:20 - EXID

Bit 2 - IDE

Bit 1 - RTR

Bits 16:31 - TIME

Bits 8:15 - FMI

Bits 0:3 - DLC

Bits 24:31 - DATA3

Bits 16:23 - DATA2

Bits 8:15 - DATA1

Bits 0:7 - DATA0

Bits 24:31 - DATA7

Bits 16:23 - DATA6

Bits 8:15 - DATA5

Bits 0:7 - DATA4

Bits 0:31 - Filter bits

Bits 0:31 - Filter bits

Bit 16 - DBF

Bit 15 - RESET

Bit 7 - TTCM

Bit 6 - ABOM

Bit 5 - AWUM

Bit 4 - NART

Bit 3 - RFLM

Bit 2 - TXFP

Bit 1 - SLEEP

Bit 0 - INRQ

Bit 11 - RX

Bit 10 - SAMP

Bit 9 - RXM

Bit 8 - TXM

Bit 4 - SLAKI

Bit 3 - WKUI

Bit 2 - ERRI

Bit 1 - SLAK

Bit 0 - INAK

Bit 31 - Lowest priority flag for mailbox 2

Bit 30 - Lowest priority flag for mailbox 1

Bit 29 - Lowest priority flag for mailbox 0

Bit 28 - Lowest priority flag for mailbox 2

Bit 27 - Lowest priority flag for mailbox 1

Bit 26 - Lowest priority flag for mailbox 0

Bits 24:25 - CODE

Bit 23 - ABRQ2

Bit 19 - TERR2

Bit 18 - ALST2

Bit 17 - TXOK2

Bit 16 - RQCP2

Bit 15 - ABRQ1

Bit 11 - TERR1

Bit 10 - ALST1

Bit 9 - TXOK1

Bit 8 - RQCP1

Bit 7 - ABRQ0

Bit 3 - TERR0

Bit 2 - ALST0

Bit 1 - TXOK0

Bit 0 - RQCP0

Get enumerated values variant

Checks if the value of the field is RELEASE

Get enumerated values variant

Checks if the value of the field is NOOVERRUN

Checks if the value of the field is OVERRUN

Get enumerated values variant

Checks if the value of the field is NOTFULL

Checks if the value of the field is FULL

Bit 5 - RFOM0

Bit 4 - FOVR0

Bit 3 - FULL0

Bits 0:1 - FMP0

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 17 - SLKIE

Bit 16 - WKUIE

Bit 15 - ERRIE

Bit 11 - LECIE

Bit 10 - BOFIE

Bit 9 - EPVIE

Bit 8 - EWGIE

Bit 6 - FOVIE1

Bit 5 - FFIE1

Bit 4 - FMPIE1

Bit 3 - FOVIE0

Bit 2 - FFIE0

Bit 1 - FMPIE0

Bit 0 - TMEIE

Get enumerated values variant

Checks if the value of the field is NOERROR

Checks if the value of the field is STUFF

Checks if the value of the field is FORM

Checks if the value of the field is ACK

Checks if the value of the field is BITRECESSIVE

Checks if the value of the field is BITDOMINANT

Checks if the value of the field is CRC

Checks if the value of the field is CUSTOM

Bits 24:31 - REC

Bits 16:23 - TEC

Bits 4:6 - LEC

Bit 2 - BOFF

Bit 1 - EPVF

Bit 0 - EWGF

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is SILENT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 31 - SILM

Bit 30 - LBKM

Bits 24:25 - SJW

Bits 20:22 - TS2

Bits 16:19 - TS1

Bits 0:9 - BRP

Bit 0 - Filter initialization mode

Bit 0 - Filter mode

Bit 1 - Filter mode

Bit 2 - Filter mode

Bit 3 - Filter mode

Bit 4 - Filter mode

Bit 5 - Filter mode

Bit 6 - Filter mode

Bit 7 - Filter mode

Bit 8 - Filter mode

Bit 9 - Filter mode

Bit 10 - Filter mode

Bit 11 - Filter mode

Bit 12 - Filter mode

Bit 13 - Filter mode

Bit 0 - Filter scale configuration

Bit 1 - Filter scale configuration

Bit 2 - Filter scale configuration

Bit 3 - Filter scale configuration

Bit 4 - Filter scale configuration

Bit 5 - Filter scale configuration

Bit 6 - Filter scale configuration

Bit 7 - Filter scale configuration

Bit 8 - Filter scale configuration

Bit 9 - Filter scale configuration

Bit 10 - Filter scale configuration

Bit 11 - Filter scale configuration

Bit 12 - Filter scale configuration

Bit 13 - Filter scale configuration

Bit 0 - Filter FIFO assignment for filter 0

Bit 1 - Filter FIFO assignment for filter 1

Bit 2 - Filter FIFO assignment for filter 2

Bit 3 - Filter FIFO assignment for filter 3

Bit 4 - Filter FIFO assignment for filter 4

Bit 5 - Filter FIFO assignment for filter 5

Bit 6 - Filter FIFO assignment for filter 6

Bit 7 - Filter FIFO assignment for filter 7

Bit 8 - Filter FIFO assignment for filter 8

Bit 9 - Filter FIFO assignment for filter 9

Bit 10 - Filter FIFO assignment for filter 10

Bit 11 - Filter FIFO assignment for filter 11

Bit 12 - Filter FIFO assignment for filter 12

Bit 13 - Filter FIFO assignment for filter 13

Bit 0 - Filter active

Bit 1 - Filter active

Bit 2 - Filter active

Bit 3 - Filter active

Bit 4 - Filter active

Bit 5 - Filter active

Bit 6 - Filter active

Bit 7 - Filter active

Bit 8 - Filter active

Bit 9 - Filter active

Bit 10 - Filter active

Bit 11 - Filter active

Bit 12 - Filter active

Bit 13 - Filter active

Bit 22 - AM/PM notation

Bits 20:21 - Hour tens in BCD format

Bits 16:19 - Hour units in BCD format

Bits 12:14 - Minute tens in BCD format

Bits 8:11 - Minute units in BCD format

Bits 4:6 - Second tens in BCD format

Bits 0:3 - Second units in BCD format

Bits 20:23 - Year tens in BCD format

Bits 16:19 - Year units in BCD format

Bits 13:15 - Week day units

Bit 12 - Month tens in BCD format

Bits 8:11 - Month units in BCD format

Bits 4:5 - Date tens in BCD format

Bits 0:3 - Date units in BCD format

Bits 0:2 - Wakeup clock selection

Bit 3 - Time-stamp event active edge

Bit 4 - Reference clock detection enable (50 or 60 Hz)

Bit 5 - Bypass the shadow registers

Bit 6 - Hour format

Bit 8 - Alarm A enable

Bit 9 - Alarm B enable

Bit 10 - Wakeup timer enable

Bit 11 - Time stamp enable

Bit 12 - Alarm A interrupt enable

Bit 13 - Alarm B interrupt enable

Bit 14 - Wakeup timer interrupt enable

Bit 15 - Time-stamp interrupt enable

Bit 16 - Add 1 hour (summer time change)

Bit 17 - Subtract 1 hour (winter time change)

Bit 18 - Backup

Bit 19 - Calibration output selection

Bit 20 - Output polarity

Bits 21:22 - Output selection

Bit 23 - Calibration output enable

Bit 24 - timestamp on internal event enable

Bit 0 - Alarm A write flag

Bit 1 - Alarm B write flag

Bit 2 - Wakeup timer write flag

Bit 3 - Shift operation pending

Bit 4 - Initialization status flag

Bit 5 - Registers synchronization flag

Bit 6 - Initialization flag

Bit 7 - Initialization mode

Bit 8 - Alarm A flag

Bit 9 - Alarm B flag

Bit 10 - Wakeup timer flag

Bit 11 - Time-stamp flag

Bit 12 - Time-stamp overflow flag

Bit 13 - Tamper detection flag

Bit 14 - RTC_TAMP2 detection flag

Bit 15 - RTC_TAMP3 detection flag

Bit 16 - Recalibration pending Flag

Bits 16:22 - Asynchronous prescaler factor

Bits 0:14 - Synchronous prescaler factor

Bits 0:15 - Wakeup auto-reload value bits

Bit 31 - Alarm A date mask

Bit 30 - Week day selection

Bits 28:29 - Date tens in BCD format

Bits 24:27 - Date units or day in BCD format

Bit 23 - Alarm A hours mask

Bit 22 - AM/PM notation

Bits 20:21 - Hour tens in BCD format

Bits 16:19 - Hour units in BCD format

Bit 15 - Alarm A minutes mask

Bits 12:14 - Minute tens in BCD format

Bits 8:11 - Minute units in BCD format

Bit 7 - Alarm A seconds mask

Bits 4:6 - Second tens in BCD format

Bits 0:3 - Second units in BCD format

Bit 31 - Alarm B date mask

Bit 30 - Week day selection

Bits 28:29 - Date tens in BCD format

Bits 24:27 - Date units or day in BCD format

Bit 23 - Alarm B hours mask

Bit 22 - AM/PM notation

Bits 20:21 - Hour tens in BCD format

Bits 16:19 - Hour units in BCD format

Bit 15 - Alarm B minutes mask

Bits 12:14 - Minute tens in BCD format

Bits 8:11 - Minute units in BCD format

Bit 7 - Alarm B seconds mask

Bits 4:6 - Second tens in BCD format

Bits 0:3 - Second units in BCD format

Bits 0:15 - Sub second value

Bits 0:3 - Second units in BCD format

Bits 4:6 - Second tens in BCD format

Bits 8:11 - Minute units in BCD format

Bits 12:14 - Minute tens in BCD format

Bits 16:19 - Hour units in BCD format

Bits 20:21 - Hour tens in BCD format

Bit 22 - AM/PM notation

Bits 13:15 - Week day units

Bit 12 - Month tens in BCD format

Bits 8:11 - Month units in BCD format

Bits 4:5 - Date tens in BCD format

Bits 0:3 - Date units in BCD format

Bits 0:15 - Sub second value

Bit 15 - Increase frequency of RTC by 488.5 ppm

Bit 14 - Use an 8-second calibration cycle period

Bit 13 - Use a 16-second calibration cycle period

Bits 0:8 - Calibration minus

Bit 0 - Tamper 1 detection enable

Bit 1 - Active level for tamper 1

Bit 2 - Tamper interrupt enable

Bit 3 - Tamper 2 detection enable

Bit 4 - Active level for tamper 2

Bit 5 - Tamper 3 detection enable

Bit 6 - Active level for tamper 3

Bit 7 - Activate timestamp on tamper detection event

Bits 8:10 - Tamper sampling frequency

Bits 11:12 - Tamper filter count

Bits 13:14 - Tamper precharge duration

Bit 15 - TAMPER pull-up disable

Bit 16 - Tamper 1 interrupt enable

Bit 17 - Tamper 1 no erase

Bit 18 - Tamper 1 mask flag

Bit 19 - Tamper 2 interrupt enable

Bit 20 - Tamper 2 no erase

Bit 21 - Tamper 2 mask flag

Bit 22 - Tamper 3 interrupt enable

Bit 23 - Tamper 3 no erase

Bit 24 - Tamper 3 mask flag

Bits 24:27 - Mask the most-significant bits starting at this bit

Bits 0:14 - Sub seconds value

Bits 24:27 - Mask the most-significant bits starting at this bit

Bits 0:14 - Sub seconds value

Bit 0 - RTC_ALARM on PC13 output type

Bit 1 - RTC_OUT remap

Bits 0:31 - BKP

Bit 0 - Reception DMA enable

Bit 1 - Transmission DMA enable

Bit 2 - Reception buffering mode

Bit 3 - Transmission buffering mode

Bit 4 - Loopback mode enable

Bit 5 - Single wire protocol master interface enable

Bit 10 - Single wire protocol master interface deactivate

Bits 0:5 - Bitrate prescaler

Bit 0 - Receive buffer full flag

Bit 1 - Transmit buffer empty flag

Bit 2 - Receive CRC error flag

Bit 3 - Receive overrun error flag

Bit 4 - Transmit underrun error flag

Bit 5 - Receive data register not empty

Bit 6 - Transmit data register empty

Bit 7 - Transfer complete flag

Bit 8 - Slave resume flag

Bit 9 - SUSPEND flag

Bit 10 - DEACTIVATED flag

Bit 0 - Receive buffer full interrupt enable

Bit 1 - Transmit buffer empty interrupt enable

Bit 2 - Receive CRC error interrupt enable

Bit 3 - Receive overrun error interrupt enable

Bit 4 - Transmit underrun error interrupt enable

Bit 5 - Receive interrupt enable

Bit 6 - Transmit interrupt enable

Bit 7 - Transmit complete interrupt enable

Bit 8 - Slave resume interrupt enable

Bits 0:4 - Receive frame length

Bits 0:31 - received data

Bit 0 - Operational amplifier Enable

Bit 1 - Operational amplifier Low Power Mode

Bits 2:3 - Operational amplifier PGA mode

Bits 4:5 - Operational amplifier Programmable amplifier gain value

Bits 8:9 - Inverting input selection

Bit 10 - Non inverted input selection

Bit 12 - Calibration mode enabled

Bit 13 - Calibration selection

Bit 14 - allows to switch from AOP offset trimmed values to AOP offset

Bit 15 - Operational amplifier calibration output

Bit 31 - Operational amplifier power supply range for stability

Bits 0:4 - Trim for NMOS differential pairs

Bits 8:12 - Trim for PMOS differential pairs

Bits 0:4 - Trim for NMOS differential pairs

Bits 8:12 - Trim for PMOS differential pairs

Bit 0 - Operational amplifier Enable

Bit 1 - Operational amplifier Low Power Mode

Bits 2:3 - Operational amplifier PGA mode

Bits 4:5 - Operational amplifier Programmable amplifier gain value

Bits 8:9 - Inverting input selection

Bit 10 - Non inverted input selection

Bit 12 - Calibration mode enabled

Bit 13 - Calibration selection

Bit 14 - allows to switch from AOP offset trimmed values to AOP offset

Bit 15 - Operational amplifier calibration output

Bits 0:4 - Trim for NMOS differential pairs

Bits 8:12 - Trim for PMOS differential pairs

Bits 0:4 - Trim for NMOS differential pairs

Bits 8:12 - Trim for PMOS differential pairs

Bits 8:13 - HSI48 oscillator smooth trimming

Bit 7 - Generate software SYNC event

Bit 6 - Automatic trimming enable

Bit 5 - Frequency error counter enable

Bit 3 - Expected SYNC interrupt enable

Bit 2 - Synchronization or trimming error interrupt enable

Bit 1 - SYNC warning interrupt enable

Bit 0 - SYNC event OK interrupt enable

Bit 31 - SYNC polarity selection

Bits 28:29 - SYNC signal source selection

Bits 24:26 - SYNC divider

Bits 16:23 - Frequency error limit

Bits 0:15 - Counter reload value

Bits 16:31 - Frequency error capture

Bit 15 - Frequency error direction

Bit 10 - Trimming overflow or underflow

Bit 9 - SYNC missed

Bit 8 - SYNC error

Bit 3 - Expected SYNC flag

Bit 2 - Error flag

Bit 1 - SYNC warning flag

Bit 0 - SYNC event OK flag

Bit 3 - Expected SYNC clear flag

Bit 2 - Error clear flag

Bit 1 - SYNC warning clear flag

Bit 0 - SYNC event OK clear flag

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bit 0 - Force USB Reset

Bit 1 - Power down

Bit 2 - Low-power mode

Bit 3 - Force suspend

Bit 4 - Resume request

Bit 5 - LPM L1 Resume request

Bit 7 - LPM L1 state request interrupt mask

Bit 8 - Expected start of frame interrupt mask

Bit 9 - Start of frame interrupt mask

Bit 10 - USB reset interrupt mask

Bit 11 - Suspend mode interrupt mask

Bit 12 - Wakeup interrupt mask

Bit 13 - Error interrupt mask

Bit 14 - Packet memory area over / underrun interrupt mask

Bit 15 - Correct transfer interrupt mask

Bits 0:3 - Endpoint Identifier

Bit 4 - Direction of transaction

Bit 7 - LPM L1 state request

Bit 8 - Expected start frame

Bit 9 - start of frame

Bit 10 - reset request

Bit 11 - Suspend mode request

Bit 12 - Wakeup

Bit 13 - Error

Bit 14 - Packet memory area over / underrun

Bit 15 - Correct transfer

[src]
pub fn fn_(&self) -> FN_R

Bits 0:10 - Frame number

Bits 11:12 - Lost SOF

Bit 13 - Locked

Bit 14 - Receive data - line status

Bit 15 - Receive data + line status

Bits 0:6 - Device address

Bit 7 - Enable function

Bits 3:15 - Buffer table

Bit 0 - LPM support enable

Bit 1 - LPM Token acknowledge enable

Bit 3 - bRemoteWake value

Bits 4:7 - BESL value

Bit 0 - Battery charging detector

Bit 1 - Data contact detection

Bit 2 - Primary detection

Bit 3 - Secondary detection

Bit 4 - Data contact detection

Bit 5 - Primary detection

Bit 6 - Secondary detection

Bit 7 - DM pull-up detection status

Bit 15 - DP pull-up control

Bit 31 - DFSDMEN

Bit 30 - CKOUTSRC

Bits 16:23 - CKOUTDIV

Bits 14:15 - DATPACK

Bits 12:13 - DATMPX

Bit 8 - CHINSEL

Bit 7 - CHEN

Bit 6 - CKABEN

Bit 5 - SCDEN

Bits 2:3 - SPICKSEL

Bits 0:1 - SITP

Bits 8:31 - OFFSET

Bits 3:7 - DTRBS

Bits 22:23 - AWFORD

Bits 16:20 - AWFOSR

Bits 12:15 - BKSCD

Bits 0:7 - SCDT

Bits 0:15 - WDATA

Bits 16:31 - INDAT1

Bits 0:15 - INDAT0

Bit 30 - Analog watchdog fast mode select

Bit 29 - Fast conversion mode selection for regular conversions

Bits 24:26 - Regular channel selection

Bit 21 - DMA channel enabled to read data for the regular conversion

Bit 19 - Launch regular conversion synchronously with DFSDM0

Bit 18 - Continuous mode selection for regular conversions

Bit 17 - Software start of a conversion on the regular channel

Bits 13:14 - Trigger enable and trigger edge selection for injected conversions

Bits 8:10 - Trigger signal selection for launching injected conversions

Bit 5 - DMA channel enabled to read data for the injected channel group

Bit 4 - Scanning conversion mode for injected conversions

Bit 3 - Launch an injected conversion synchronously with the DFSDM0 JSWSTART trigger

Bit 1 - Start a conversion of the injected group of channels

Bit 0 - DFSDM enable

Bits 24:31 - short-circuit detector flag

Bits 16:23 - Clock absence flag

Bit 14 - Regular conversion in progress status

Bit 13 - Injected conversion in progress status

Bit 4 - Analog watchdog

Bit 3 - Regular conversion overrun flag

Bit 2 - Injected conversion overrun flag

Bit 1 - End of regular conversion flag

Bit 0 - End of injected conversion flag

Bits 24:31 - Clear the short-circuit detector flag

Bits 16:23 - Clear the clock absence flag

Bit 3 - Clear the regular conversion overrun flag

Bit 2 - Clear the injected conversion overrun flag

Bits 0:7 - Injected channel group selection

Bits 29:31 - Sinc filter order

Bits 16:25 - Sinc filter oversampling ratio (decimation rate)

Bits 0:7 - Integrator oversampling ratio (averaging length)

Bits 8:31 - Injected group conversion data

Bits 0:2 - Injected channel most recently converted

Bits 8:31 - Regular channel conversion data

Bit 4 - Regular channel pending data

Bits 0:2 - Regular channel most recently converted

Bits 8:31 - Analog watchdog high threshold

Bits 0:3 - Break signal assignment to analog watchdog high threshold event

Bits 8:31 - Analog watchdog low threshold

Bits 0:3 - Break signal assignment to analog watchdog low threshold event

Bits 8:15 - Analog watchdog high threshold flag

Bits 0:7 - Analog watchdog low threshold flag

Bits 8:15 - Clear the analog watchdog high threshold flag

Bits 0:7 - Clear the analog watchdog low threshold flag

Bits 8:31 - Extremes detector maximum value

Bits 0:2 - Extremes detector maximum data channel

Bits 8:31 - EXMIN

Bits 0:2 - Extremes detector minimum data channel

Bits 4:31 - 28-bit timer counting conversion time t = CNVCNT[27:0]

Bits 16:23 - Analog watchdog channel selection

Bits 8:15 - Extremes detector channel selection

Bit 6 - Clock absence interrupt enable

Bit 5 - Short-circuit detector interrupt enable

Bit 4 - Analog watchdog interrupt enable

Bit 3 - Regular data overrun interrupt enable

Bit 2 - Injected data overrun interrupt enable

Bit 1 - Regular end of conversion interrupt enable

Bit 0 - Injected end of conversion interrupt enable

Bits 16:23 - Analog watchdog channel selection

Bits 8:15 - Extremes detector channel selection

Bit 6 - Clock absence interrupt enable

Bit 5 - Short-circuit detector interrupt enable

Bit 4 - Analog watchdog interrupt enable

Bit 3 - Regular data overrun interrupt enable

Bit 2 - Injected data overrun interrupt enable

Bit 1 - Regular end of conversion interrupt enable

Bit 0 - Injected end of conversion interrupt enable

Bits 16:23 - Analog watchdog channel selection

Bits 8:15 - Extremes detector channel selection

Bit 6 - Clock absence interrupt enable

Bit 5 - Short-circuit detector interrupt enable

Bit 4 - Analog watchdog interrupt enable

Bit 3 - Regular data overrun interrupt enable

Bit 2 - Injected data overrun interrupt enable

Bit 1 - Regular end of conversion interrupt enable

Bit 0 - Injected end of conversion interrupt enable

Bits 16:23 - Analog watchdog channel selection

Bits 8:15 - Extremes detector channel selection

Bit 6 - Clock absence interrupt enable

Bit 5 - Short-circuit detector interrupt enable

Bit 4 - Analog watchdog interrupt enable

Bit 3 - Regular data overrun interrupt enable

Bit 2 - Injected data overrun interrupt enable

Bit 1 - Regular end of conversion interrupt enable

Bit 0 - Injected end of conversion interrupt enable

Bits 24:31 - Clock prescaler

Bit 23 - Polling match mode

Bit 22 - Automatic poll mode stop

Bit 20 - TimeOut interrupt enable

Bit 19 - Status match interrupt enable

Bit 18 - FIFO threshold interrupt enable

Bit 17 - Transfer complete interrupt enable

Bit 16 - Transfer error interrupt enable

Bits 8:12 - IFO threshold level

Bit 7 - FLASH memory selection

Bit 6 - Dual-flash mode

Bit 4 - Sample shift

Bit 3 - Timeout counter enable

Bit 2 - DMA enable

Bit 1 - Abort request

Bit 0 - Enable

Bits 16:20 - FLASH memory size

Bits 8:10 - Chip select high time

Bit 0 - Mode 0 / mode 3

Bits 8:14 - FIFO level

Bit 5 - Busy

Bit 4 - Timeout flag

Bit 3 - Status match flag

Bit 2 - FIFO threshold flag

Bit 1 - Transfer complete flag

Bit 0 - Transfer error flag

Bit 4 - Clear timeout flag

Bit 3 - Clear status match flag

Bit 1 - Clear transfer complete flag

Bit 0 - Clear transfer error flag

Bits 0:31 - Data length

Bit 31 - Double data rate mode

Bit 30 - DDR hold half cycle

Bit 28 - Send instruction only once mode

Bits 26:27 - Functional mode

Bits 24:25 - Data mode

Bits 18:22 - Number of dummy cycles

Bits 16:17 - Alternate bytes size

Bits 14:15 - Alternate bytes mode

Bits 12:13 - Address size

Bits 10:11 - Address mode

Bits 8:9 - Instruction mode

Bits 0:7 - Instruction

Bits 0:31 - Address

Bits 0:31 - ALTERNATE

Bits 0:31 - Data

Bits 0:31 - Status mask

[src]
pub fn match_(&self) -> MATCH_R

Bits 0:31 - Status match

Bits 0:15 - Polling interval

Bits 0:15 - Timeout period

Bits 0:11 - Device identifier

Bits 16:31 - Revision identifie

Bit 0 - Debug Sleep mode

Bit 1 - Debug Stop mode

Bit 2 - Debug Standby mode

Bit 5 - Trace pin assignment control

Bits 6:7 - Trace pin assignment control

Bit 0 - TIM2 counter stopped when core is halted

Bit 4 - TIM6 counter stopped when core is halted

Bit 5 - TIM7 counter stopped when core is halted

Bit 10 - RTC counter stopped when core is halted

Bit 11 - Window watchdog counter stopped when core is halted

Bit 12 - Independent watchdog counter stopped when core is halted

Bit 21 - I2C1 SMBUS timeout counter stopped when core is halted

Bit 22 - I2C2 SMBUS timeout counter stopped when core is halted

Bit 23 - I2C3 SMBUS timeout counter stopped when core is halted

Bit 25 - bxCAN stopped when core is halted

Bit 31 - LPTIM1 counter stopped when core is halted

Bit 5 - LPTIM2 counter stopped when core is halted

Bit 11 - TIM1 counter stopped when core is halted

Bit 16 - TIM15 counter stopped when core is halted

Bit 17 - TIM16 counter stopped when core is halted

Bit 0 - LSPACT

Bit 1 - USER

Bit 3 - THREAD

Bit 4 - HFRDY

Bit 5 - MMRDY

Bit 6 - BFRDY

Bit 8 - MONRDY

Bit 30 - LSPEN

Bit 31 - ASPEN

Bits 3:31 - Location of unpopulated floating-point

Bit 0 - Invalid operation cumulative exception bit

Bit 1 - Division by zero cumulative exception bit.

Bit 2 - Overflow cumulative exception bit

Bit 3 - Underflow cumulative exception bit

Bit 4 - Inexact cumulative exception bit

Bit 7 - Input denormal cumulative exception bit.

Bits 22:23 - Rounding Mode control field

Bit 24 - Flush-to-zero mode control bit:

Bit 25 - Default NaN mode control bit

Bit 26 - Alternative half-precision control bit

Bit 28 - Overflow condition code flag

Bit 29 - Carry condition code flag

Bit 30 - Zero condition code flag

Bit 31 - Negative condition code flag

Bit 0 - Counter enable

Bit 1 - SysTick exception request enable

Bit 2 - Clock source selection

Bit 16 - COUNTFLAG

Bits 0:23 - RELOAD value

Bits 0:23 - Current counter value

Bits 0:23 - Calibration value

Bit 30 - SKEW flag: Indicates whether the TENMS value is exact

Bit 31 - NOREF flag. Reads as zero

Bits 0:8 - Software generated interrupt ID

Bits 20:23 - CP

Bit 0 - DISMCYCINT

Bit 1 - DISDEFWBUF

Bit 2 - DISFOLD

Bit 8 - DISFPCA

Bit 9 - DISOOFP

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is EDGEALIGNED

Checks if the value of the field is CENTERALIGNED1

Checks if the value of the field is CENTERALIGNED2

Checks if the value of the field is CENTERALIGNED3

Get enumerated values variant

Checks if the value of the field is UP

Checks if the value of the field is DOWN

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ANYEVENT

Checks if the value of the field is COUNTERONLY

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bits 8:9 - Clock division

Bit 7 - Auto-reload preload enable

Bits 5:6 - Center-aligned mode selection

Bit 4 - Direction

Bit 3 - One-pulse mode

Bit 2 - Update request source

Bit 1 - Update disable

Bit 0 - Counter enable

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is XOR

Get enumerated values variant

Checks if the value of the field is RESET

Checks if the value of the field is ENABLE

Checks if the value of the field is UPDATE

Checks if the value of the field is COMPAREPULSE

Checks if the value of the field is COMPAREOC1

Checks if the value of the field is COMPAREOC2

Checks if the value of the field is COMPAREOC3

Checks if the value of the field is COMPAREOC4

Get enumerated values variant

Checks if the value of the field is ONCOMPARE

Checks if the value of the field is ONUPDATE

Bit 7 - TI1 selection

Bits 4:6 - Master mode selection

Bit 3 - Capture/compare DMA selection

Get enumerated values variant

Checks if the value of the field is NOTINVERTED

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Checks if the value of the field is DIV8

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is NOSYNC

Checks if the value of the field is SYNC

Get enumerated values variant

Checks if the value of the field is ITR0

Checks if the value of the field is ITR1

Checks if the value of the field is ITR2

Checks if the value of the field is TI1F_ED

Checks if the value of the field is TI1FP1

Checks if the value of the field is TI2FP2

Checks if the value of the field is ETRF

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENCODER_MODE_1

Checks if the value of the field is ENCODER_MODE_2

Checks if the value of the field is ENCODER_MODE_3

Checks if the value of the field is RESET_MODE

Checks if the value of the field is GATED_MODE

Checks if the value of the field is TRIGGER_MODE

Checks if the value of the field is EXT_CLOCK_MODE

Bit 15 - External trigger polarity

Bit 14 - External clock enable

Bits 12:13 - External trigger prescaler

Bits 8:11 - External trigger filter

Bit 7 - Master/Slave mode

Bits 4:6 - Trigger selection

Bits 0:2 - Slave mode selection

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Trigger DMA request enable

Bit 13 - COM DMA request enable

Bit 12 - Capture/Compare 4 DMA request enable

Bit 11 - Capture/Compare 3 DMA request enable

Bit 10 - Capture/Compare 2 DMA request enable

Bit 9 - Capture/Compare 1 DMA request enable

Bit 8 - Update DMA request enable

Bit 6 - Trigger interrupt enable

Bit 4 - Capture/Compare 4 interrupt enable

Bit 3 - Capture/Compare 3 interrupt enable

Bit 2 - Capture/Compare 2 interrupt enable

Bit 1 - Capture/Compare 1 interrupt enable

Bit 0 - Update interrupt enable

Get enumerated values variant

Checks if the value of the field is OVERCAPTURE

Get enumerated values variant

Checks if the value of the field is NOTRIGGER

Checks if the value of the field is TRIGGER

Get enumerated values variant

[src]
pub fn is_match_(&self) -> bool

Checks if the value of the field is MATCH

Get enumerated values variant

Checks if the value of the field is CLEAR

Checks if the value of the field is UPDATEPENDING

Bit 12 - Capture/Compare 4 overcapture flag

Bit 11 - Capture/Compare 3 overcapture flag

Bit 10 - Capture/compare 2 overcapture flag

Bit 9 - Capture/Compare 1 overcapture flag

Bit 6 - Trigger interrupt flag

Bit 4 - Capture/Compare 4 interrupt flag

Bit 3 - Capture/Compare 3 interrupt flag

Bit 2 - Capture/Compare 2 interrupt flag

Bit 1 - Capture/compare 1 interrupt flag

Bit 0 - Update interrupt flag

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output compare 2 clear enable

Bits 12:14 - Output compare 2 mode

Bit 11 - Output compare 2 preload enable

Bit 10 - Output compare 2 fast enable

Bits 8:9 - Capture/Compare 2 selection

Bit 7 - Output compare 1 clear enable

Bits 4:6 - Output compare 1 mode

Bit 3 - Output compare 1 preload enable

Bit 2 - Output compare 1 fast enable

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is TI2

Checks if the value of the field is TI1

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is TI1

Checks if the value of the field is TI2

Checks if the value of the field is TRC

Bits 12:15 - Input capture 2 filter

Bits 10:11 - Input capture 2 prescaler

Bits 8:9 - Capture/compare 2 selection

Bits 4:7 - Input capture 1 filter

Bits 2:3 - Input capture 1 prescaler

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output compare 4 clear enable

Bits 12:14 - Output compare 4 mode

Bit 11 - Output compare 4 preload enable

Bit 10 - Output compare 4 fast enable

Bits 8:9 - Capture/Compare 4 selection

Bit 7 - Output compare 3 clear enable

Bits 4:6 - Output compare 3 mode

Bit 3 - Output compare 3 preload enable

Bit 2 - Output compare 3 fast enable

Bits 0:1 - Capture/Compare 3 selection

Get enumerated values variant

Checks if the value of the field is TI4

Checks if the value of the field is TI3

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is TI3

Checks if the value of the field is TI4

Checks if the value of the field is TRC

Bits 12:15 - Input capture 4 filter

Bits 10:11 - Input capture 4 prescaler

Bits 8:9 - Capture/Compare 4 selection

Bits 4:7 - Input capture 3 filter

Bits 2:3 - Input capture 3 prescaler

Bits 0:1 - Capture/Compare 3 selection

Bit 15 - Capture/Compare 4 output Polarity

Bit 13 - Capture/Compare 3 output Polarity

Bit 12 - Capture/Compare 4 output enable

Bit 11 - Capture/Compare 3 output Polarity

Bit 9 - Capture/Compare 3 output Polarity

Bit 8 - Capture/Compare 3 output enable

Bit 7 - Capture/Compare 2 output Polarity

Bit 5 - Capture/Compare 2 output Polarity

Bit 4 - Capture/Compare 2 output enable

Bit 3 - Capture/Compare 1 output Polarity

Bit 1 - Capture/Compare 1 output Polarity

Bit 0 - Capture/Compare 1 output enable

Bits 16:31 - High counter value (TIM2 only)

Bits 0:15 - Counter value

Bits 0:15 - Prescaler value

Bits 16:31 - High Auto-reload value (TIM2 only)

Bits 0:15 - Auto-reload value

Bits 16:31 - High Capture/Compare 1 value (TIM2 only)

Bits 0:15 - Capture/Compare 1 value

Bits 8:12 - DMA burst length

Bits 0:4 - DMA base address

Bits 0:15 - DMA register for burst accesses

Bits 0:2 - Timer2 ETR remap

Bits 3:4 - Internal trigger

Bit 26 - Injected Context Queue Overflow flag of the slave ADC

Bit 25 - Analog watchdog 3 flag of the slave ADC

Bit 24 - Analog watchdog 2 flag of the slave ADC

Bit 23 - Analog watchdog 1 flag of the slave ADC

Bit 22 - End of injected sequence flag of the slave ADC

Bit 21 - End of injected conversion flag of the slave ADC

Bit 20 - Overrun flag of the slave ADC

Bit 19 - End of regular sequence flag of the slave ADC

Bit 18 - End of regular conversion flag of the slave ADC

Bit 17 - End of Sampling phase flag of the slave ADC

Bit 16 - Slave ADC ready

Bit 10 - Injected Context Queue Overflow flag of the master ADC

Bit 9 - Analog watchdog 3 flag of the master ADC

Bit 8 - Analog watchdog 2 flag of the master ADC

Bit 7 - Analog watchdog 1 flag of the master ADC

Bit 6 - End of injected sequence flag of the master ADC

Bit 5 - End of injected conversion flag of the master ADC

Bit 4 - Overrun flag of the master ADC

Bit 3 - End of regular sequence flag of the master ADC

Bit 2 - End of regular conversion flag of the master ADC

Bit 1 - End of Sampling phase flag of the master ADC

Bit 0 - master ADC ready

Bit 24 - CH18 selection (Vbat)

Bit 23 - CH17 selection (temperature)

Bit 22 - Vrefint enable

Bits 18:21 - ADC prescaler

Bits 16:17 - ADC clock mode

Bits 14:15 - Direct memory access mode for dual ADC mode

Bit 13 - DMA configuration (for dual ADC mode)

Bits 8:11 - Delay between 2 sampling phases

Bits 0:4 - Dual ADC mode selection

Bits 16:31 - Regular data of the slave ADC

Bits 0:15 - Regular data of the master ADC

Bit 0 - DAC channel1 enable

Bit 2 - DAC channel1 trigger enable

Bits 3:5 - DAC channel1 trigger selection

Bits 6:7 - DAC channel1 noise/triangle wave generation enable

Bits 8:11 - DAC channel1 mask/amplitude selector

Bit 12 - DAC channel1 DMA enable

Bit 13 - DAC channel1 DMA Underrun Interrupt enable

Bit 14 - DAC Channel 1 calibration enable

Bit 16 - DAC channel2 enable

Bit 18 - DAC channel2 trigger enable

Bits 19:21 - DAC channel2 trigger selection

Bits 22:23 - DAC channel2 noise/triangle wave generation enable

Bits 24:27 - DAC channel2 mask/amplitude selector

Bit 28 - DAC channel2 DMA enable

Bit 29 - DAC channel2 DMA underrun interrupt enable

Bit 30 - DAC Channel 2 calibration enable

Bits 0:11 - DAC channel1 12-bit right-aligned data

Bits 4:15 - DAC channel1 12-bit left-aligned data

Bits 0:7 - DAC channel1 8-bit right-aligned data

Bits 0:11 - DAC channel2 12-bit right-aligned data

Bits 4:15 - DAC channel2 12-bit left-aligned data

Bits 0:7 - DAC channel2 8-bit right-aligned data

Bits 0:11 - DAC channel1 12-bit right-aligned data

Bits 16:27 - DAC channel2 12-bit right-aligned data

Bits 4:15 - DAC channel1 12-bit left-aligned data

Bits 20:31 - DAC channel2 12-bit left-aligned data

Bits 0:7 - DAC channel1 8-bit right-aligned data

Bits 8:15 - DAC channel2 8-bit right-aligned data

Bits 0:11 - DAC channel1 data output

Bits 0:11 - DAC channel2 data output

Bit 13 - DAC channel1 DMA underrun flag

Bit 14 - DAC Channel 1 calibration offset status

Bit 15 - DAC Channel 1 busy writing sample time flag

Bit 29 - DAC channel2 DMA underrun flag

Bit 30 - DAC Channel 2 calibration offset status

Bit 31 - DAC Channel 2 busy writing sample time flag

Bits 0:4 - DAC Channel 1 offset trimming value

Bits 16:20 - DAC Channel 2 offset trimming value

Bits 0:2 - DAC Channel 1 mode

Bits 16:18 - DAC Channel 2 mode

Bits 0:9 - DAC Channel 1 sample Time

Bits 0:9 - DAC Channel 2 sample Time

Bits 0:9 - DAC Channel 1 hold Time

Bits 16:25 - DAC Channel 2 hold time

Bits 0:7 - DAC Channel 1 refresh Time

Bits 16:23 - DAC Channel 2 refresh Time

Get enumerated values variant

Checks if the value of the field is NOERROR

Checks if the value of the field is ERROR

Get enumerated values variant

Checks if the value of the field is NOTHALF

Checks if the value of the field is HALF

Get enumerated values variant

Checks if the value of the field is NOTCOMPLETE

Checks if the value of the field is COMPLETE

Get enumerated values variant

Checks if the value of the field is NOEVENT

Checks if the value of the field is EVENT

Bit 27 - Channel x transfer error flag (x = 1 ..7)

Bit 26 - Channel x half transfer flag (x = 1 ..7)

Bit 25 - Channel x transfer complete flag (x = 1 ..7)

Bit 24 - Channel x global interrupt flag (x = 1 ..7)

Bit 23 - Channel x transfer error flag (x = 1 ..7)

Bit 22 - Channel x half transfer flag (x = 1 ..7)

Bit 21 - Channel x transfer complete flag (x = 1 ..7)

Bit 20 - Channel x global interrupt flag (x = 1 ..7)

Bit 19 - Channel x transfer error flag (x = 1 ..7)

Bit 18 - Channel x half transfer flag (x = 1 ..7)

Bit 17 - Channel x transfer complete flag (x = 1 ..7)

Bit 16 - Channel x global interrupt flag (x = 1 ..7)

Bit 15 - Channel x transfer error flag (x = 1 ..7)

Bit 14 - Channel x half transfer flag (x = 1 ..7)

Bit 13 - Channel x transfer complete flag (x = 1 ..7)

Bit 12 - Channel x global interrupt flag (x = 1 ..7)

Bit 11 - Channel x transfer error flag (x = 1 ..7)

Bit 10 - Channel x half transfer flag (x = 1 ..7)

Bit 9 - Channel x transfer complete flag (x = 1 ..7)

Bit 8 - Channel x global interrupt flag (x = 1 ..7)

Bit 7 - Channel x transfer error flag (x = 1 ..7)

Bit 6 - Channel x half transfer flag (x = 1 ..7)

Bit 5 - Channel x transfer complete flag (x = 1 ..7)

Bit 4 - Channel x global interrupt flag (x = 1 ..7)

Bit 3 - Channel x transfer error flag (x = 1 ..7)

Bit 2 - Channel x half transfer flag (x = 1 ..7)

Bit 1 - Channel x transfer complete flag (x = 1 ..7)

Bit 0 - Channel x global interrupt flag (x = 1 ..7)

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is MEDIUM

Checks if the value of the field is HIGH

Checks if the value of the field is VERYHIGH

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is FROMPERIPHERAL

Checks if the value of the field is FROMMEMORY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Memory to memory mode

Bits 12:13 - Channel priority level

Bits 10:11 - Memory size

Bits 8:9 - Peripheral size

Bit 7 - Memory increment mode

Bit 6 - Peripheral increment mode

Bit 5 - Circular mode

Bit 4 - Data transfer direction

Bit 3 - Transfer error interrupt enable

Bit 2 - Half transfer interrupt enable

Bit 1 - Transfer complete interrupt enable

Bit 0 - Channel enable

Bits 0:15 - Number of data to transfer

Bits 0:31 - Peripheral address

Bits 0:31 - Memory address

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is MEDIUM

Checks if the value of the field is HIGH

Checks if the value of the field is VERYHIGH

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is FROMPERIPHERAL

Checks if the value of the field is FROMMEMORY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Memory to memory mode

Bits 12:13 - Channel priority level

Bits 10:11 - Memory size

Bits 8:9 - Peripheral size

Bit 7 - Memory increment mode

Bit 6 - Peripheral increment mode

Bit 5 - Circular mode

Bit 4 - Data transfer direction

Bit 3 - Transfer error interrupt enable

Bit 2 - Half transfer interrupt enable

Bit 1 - Transfer complete interrupt enable

Bit 0 - Channel enable

Bits 0:15 - Number of data to transfer

Bits 0:31 - Peripheral address

Bits 0:31 - Memory address

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is MEDIUM

Checks if the value of the field is HIGH

Checks if the value of the field is VERYHIGH

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is FROMPERIPHERAL

Checks if the value of the field is FROMMEMORY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Memory to memory mode

Bits 12:13 - Channel priority level

Bits 10:11 - Memory size

Bits 8:9 - Peripheral size

Bit 7 - Memory increment mode

Bit 6 - Peripheral increment mode

Bit 5 - Circular mode

Bit 4 - Data transfer direction

Bit 3 - Transfer error interrupt enable

Bit 2 - Half transfer interrupt enable

Bit 1 - Transfer complete interrupt enable

Bit 0 - Channel enable

Bits 0:15 - Number of data to transfer

Bits 0:31 - Peripheral address

Bits 0:31 - Memory address

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is MEDIUM

Checks if the value of the field is HIGH

Checks if the value of the field is VERYHIGH

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is FROMPERIPHERAL

Checks if the value of the field is FROMMEMORY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Memory to memory mode

Bits 12:13 - Channel priority level

Bits 10:11 - Memory size

Bits 8:9 - Peripheral size

Bit 7 - Memory increment mode

Bit 6 - Peripheral increment mode

Bit 5 - Circular mode

Bit 4 - Data transfer direction

Bit 3 - Transfer error interrupt enable

Bit 2 - Half transfer interrupt enable

Bit 1 - Transfer complete interrupt enable

Bit 0 - Channel enable

Bits 0:15 - Number of data to transfer

Bits 0:31 - Peripheral address

Bits 0:31 - Memory address

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is MEDIUM

Checks if the value of the field is HIGH

Checks if the value of the field is VERYHIGH

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is FROMPERIPHERAL

Checks if the value of the field is FROMMEMORY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Memory to memory mode

Bits 12:13 - Channel priority level

Bits 10:11 - Memory size

Bits 8:9 - Peripheral size

Bit 7 - Memory increment mode

Bit 6 - Peripheral increment mode

Bit 5 - Circular mode

Bit 4 - Data transfer direction

Bit 3 - Transfer error interrupt enable

Bit 2 - Half transfer interrupt enable

Bit 1 - Transfer complete interrupt enable

Bit 0 - Channel enable

Bits 0:15 - Number of data to transfer

Bits 0:31 - Peripheral address

Bits 0:31 - Memory address

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is MEDIUM

Checks if the value of the field is HIGH

Checks if the value of the field is VERYHIGH

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is FROMPERIPHERAL

Checks if the value of the field is FROMMEMORY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Memory to memory mode

Bits 12:13 - Channel priority level

Bits 10:11 - Memory size

Bits 8:9 - Peripheral size

Bit 7 - Memory increment mode

Bit 6 - Peripheral increment mode

Bit 5 - Circular mode

Bit 4 - Data transfer direction

Bit 3 - Transfer error interrupt enable

Bit 2 - Half transfer interrupt enable

Bit 1 - Transfer complete interrupt enable

Bit 0 - Channel enable

Bits 0:15 - Number of data to transfer

Bits 0:31 - Peripheral address

Bits 0:31 - Memory address

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is MEDIUM

Checks if the value of the field is HIGH

Checks if the value of the field is VERYHIGH

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is FROMPERIPHERAL

Checks if the value of the field is FROMMEMORY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Memory to memory mode

Bits 12:13 - Channel priority level

Bits 10:11 - Memory size

Bits 8:9 - Peripheral size

Bit 7 - Memory increment mode

Bit 6 - Peripheral increment mode

Bit 5 - Circular mode

Bit 4 - Data transfer direction

Bit 3 - Transfer error interrupt enable

Bit 2 - Half transfer interrupt enable

Bit 1 - Transfer complete interrupt enable

Bit 0 - Channel enable

Bits 0:15 - Number of data to transfer

Bits 0:31 - Peripheral address

Bits 0:31 - Memory address

Get enumerated values variant

Checks if the value of the field is NOMAPPING

Checks if the value of the field is MAP1

Checks if the value of the field is MAP2

Checks if the value of the field is MAP3

Checks if the value of the field is MAP4

Checks if the value of the field is MAP5

Checks if the value of the field is MAP6

Checks if the value of the field is MAP7

Checks if the value of the field is MAP8

Checks if the value of the field is MAP9

Checks if the value of the field is MAP10

Checks if the value of the field is MAP11

Checks if the value of the field is MAP12

Checks if the value of the field is MAP13

Checks if the value of the field is MAP14

Checks if the value of the field is MAP15

Bits 24:27 - DMA channel 7 selection

Bits 20:23 - DMA channel 6 selection

Bits 16:19 - DMA channel 5 selection

Bits 12:15 - DMA channel 4 selection

Bits 8:11 - DMA channel 3 selection

Bits 4:7 - DMA channel 2 selection

Bits 0:3 - DMA channel 1 selection

Bits 0:31 - Data register bits

Bits 0:7 - General-purpose 8-bit data register bits

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is REVERSED

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is BYTE

Checks if the value of the field is HALFWORD

Checks if the value of the field is WORD

Get enumerated values variant

Checks if the value of the field is POLYSIZE32

Checks if the value of the field is POLYSIZE16

Checks if the value of the field is POLYSIZE8

Checks if the value of the field is POLYSIZE7

Bit 7 - Reverse output data

Bits 5:6 - Reverse input data

Bits 3:4 - Polynomial size

Bits 0:31 - Programmable initial CRC value

Bits 0:31 - Programmable polynomial

Bits 0:7 - Data register bits

Bits 0:15 - Data register bits

Bits 5:6 - Bias selector

Bits 2:4 - Duty selection

Bit 1 - Voltage source selection

Bit 0 - LCD controller enable

Bit 7 - Mux segment enable

Bit 8 - Voltage output buffer enable

Bits 22:25 - PS 16-bit prescaler

Bits 18:21 - DIV clock divider

Bits 16:17 - Blink mode selection

Bits 13:15 - Blink frequency selection

Bits 10:12 - Contrast control

Bits 7:9 - Dead time duration

Bits 4:6 - Pulse ON duration

Bit 3 - Update display done interrupt enable

Bit 1 - Start of frame interrupt enable

Bit 0 - High drive enable

Bit 5 - LCD Frame Control Register Synchronization flag

Bit 4 - Ready flag

Bit 3 - Update Display Done

Bit 1 - Start of frame flag

Bit 0 - ENS

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bit 31 - S31

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bit 31 - S31

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bit 31 - S31

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bit 31 - S31

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bit 31 - S31

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bit 31 - S31

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bit 31 - S31

Bit 30 - S30

Bit 29 - S29

Bit 28 - S28

Bit 27 - S27

Bit 26 - S26

Bit 25 - S25

Bit 24 - S24

Bit 23 - S23

Bit 22 - S22

Bit 21 - S21

Bit 20 - S20

Bit 19 - S19

Bit 18 - S18

Bit 17 - S17

Bit 16 - S16

Bit 15 - S15

Bit 14 - S14

Bit 13 - S13

Bit 12 - S12

Bit 11 - S11

Bit 10 - S10

Bit 9 - S09

Bit 8 - S08

Bit 7 - S07

Bit 6 - S06

Bit 5 - S05

Bit 4 - S04

Bit 3 - S03

Bit 2 - S02

Bit 1 - S01

Bit 0 - S00

Bits 28:31 - Charge transfer pulse high

Bits 24:27 - Charge transfer pulse low

Bits 17:23 - Spread spectrum deviation

Bit 16 - Spread spectrum enable

Bit 15 - Spread spectrum prescaler

Bits 12:14 - pulse generator prescaler

Bits 5:7 - Max count value

Bit 4 - I/O Default mode

Bit 3 - Synchronization pin polarity

Bit 2 - Acquisition mode

Bit 1 - Start a new acquisition

Bit 0 - Touch sensing controller enable

Bit 1 - Max count error interrupt enable

Bit 0 - End of acquisition interrupt enable

Bit 1 - Max count error interrupt clear

Bit 0 - End of acquisition interrupt clear

Bit 1 - Max count error flag

Bit 0 - End of acquisition flag

Bit 31 - G8_IO4

Bit 30 - G8_IO3

Bit 29 - G8_IO2

Bit 28 - G8_IO1

Bit 27 - G7_IO4

Bit 26 - G7_IO3

Bit 25 - G7_IO2

Bit 24 - G7_IO1

Bit 23 - G6_IO4

Bit 22 - G6_IO3

Bit 21 - G6_IO2

Bit 20 - G6_IO1

Bit 19 - G5_IO4

Bit 18 - G5_IO3

Bit 17 - G5_IO2

Bit 16 - G5_IO1

Bit 15 - G4_IO4

Bit 14 - G4_IO3

Bit 13 - G4_IO2

Bit 12 - G4_IO1

Bit 11 - G3_IO4

Bit 10 - G3_IO3

Bit 9 - G3_IO2

Bit 8 - G3_IO1

Bit 7 - G2_IO4

Bit 6 - G2_IO3

Bit 5 - G2_IO2

Bit 4 - G2_IO1

Bit 3 - G1_IO4

Bit 2 - G1_IO3

Bit 1 - G1_IO2

Bit 0 - G1_IO1

Bit 31 - G8_IO4

Bit 30 - G8_IO3

Bit 29 - G8_IO2

Bit 28 - G8_IO1

Bit 27 - G7_IO4

Bit 26 - G7_IO3

Bit 25 - G7_IO2

Bit 24 - G7_IO1

Bit 23 - G6_IO4

Bit 22 - G6_IO3

Bit 21 - G6_IO2

Bit 20 - G6_IO1

Bit 19 - G5_IO4

Bit 18 - G5_IO3

Bit 17 - G5_IO2

Bit 16 - G5_IO1

Bit 15 - G4_IO4

Bit 14 - G4_IO3

Bit 13 - G4_IO2

Bit 12 - G4_IO1

Bit 11 - G3_IO4

Bit 10 - G3_IO3

Bit 9 - G3_IO2

Bit 8 - G3_IO1

Bit 7 - G2_IO4

Bit 6 - G2_IO3

Bit 5 - G2_IO2

Bit 4 - G2_IO1

Bit 3 - G1_IO4

Bit 2 - G1_IO3

Bit 1 - G1_IO2

Bit 0 - G1_IO1

Bit 31 - G8_IO4

Bit 30 - G8_IO3

Bit 29 - G8_IO2

Bit 28 - G8_IO1

Bit 27 - G7_IO4

Bit 26 - G7_IO3

Bit 25 - G7_IO2

Bit 24 - G7_IO1

Bit 23 - G6_IO4

Bit 22 - G6_IO3

Bit 21 - G6_IO2

Bit 20 - G6_IO1

Bit 19 - G5_IO4

Bit 18 - G5_IO3

Bit 17 - G5_IO2

Bit 16 - G5_IO1

Bit 15 - G4_IO4

Bit 14 - G4_IO3

Bit 13 - G4_IO2

Bit 12 - G4_IO1

Bit 11 - G3_IO4

Bit 10 - G3_IO3

Bit 9 - G3_IO2

Bit 8 - G3_IO1

Bit 7 - G2_IO4

Bit 6 - G2_IO3

Bit 5 - G2_IO2

Bit 4 - G2_IO1

Bit 3 - G1_IO4

Bit 2 - G1_IO3

Bit 1 - G1_IO2

Bit 0 - G1_IO1

Bit 31 - G8_IO4

Bit 30 - G8_IO3

Bit 29 - G8_IO2

Bit 28 - G8_IO1

Bit 27 - G7_IO4

Bit 26 - G7_IO3

Bit 25 - G7_IO2

Bit 24 - G7_IO1

Bit 23 - G6_IO4

Bit 22 - G6_IO3

Bit 21 - G6_IO2

Bit 20 - G6_IO1

Bit 19 - G5_IO4

Bit 18 - G5_IO3

Bit 17 - G5_IO2

Bit 16 - G5_IO1

Bit 15 - G4_IO4

Bit 14 - G4_IO3

Bit 13 - G4_IO2

Bit 12 - G4_IO1

Bit 11 - G3_IO4

Bit 10 - G3_IO3

Bit 9 - G3_IO2

Bit 8 - G3_IO1

Bit 7 - G2_IO4

Bit 6 - G2_IO3

Bit 5 - G2_IO2

Bit 4 - G2_IO1

Bit 3 - G1_IO4

Bit 2 - G1_IO3

Bit 1 - G1_IO2

Bit 0 - G1_IO1

Bit 23 - Analog I/O group x status

Bit 22 - Analog I/O group x status

Bit 21 - Analog I/O group x status

Bit 20 - Analog I/O group x status

Bit 19 - Analog I/O group x status

Bit 18 - Analog I/O group x status

Bit 17 - Analog I/O group x status

Bit 16 - Analog I/O group x status

Bit 7 - Analog I/O group x enable

Bit 6 - Analog I/O group x enable

Bit 5 - Analog I/O group x enable

Bit 4 - Analog I/O group x enable

Bit 3 - Analog I/O group x enable

Bit 2 - Analog I/O group x enable

Bit 1 - Analog I/O group x enable

Bit 0 - Analog I/O group x enable

Bits 0:13 - Counter value

Get enumerated values variant

Checks if the value of the field is DIVIDEBY4

Checks if the value of the field is DIVIDEBY8

Checks if the value of the field is DIVIDEBY16

Checks if the value of the field is DIVIDEBY32

Checks if the value of the field is DIVIDEBY64

Checks if the value of the field is DIVIDEBY128

Checks if the value of the field is DIVIDEBY256

Checks if the value of the field is DIVIDEBY256BIS

Bits 0:2 - Prescaler divider

Bits 0:11 - Watchdog counter reload value

Bit 2 - Watchdog counter window value update

Bit 1 - Watchdog counter reload value update

Bit 0 - Watchdog prescaler value update

Bits 0:11 - Watchdog counter window value

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 7 - Activation bit

Bits 0:6 - 7-bit counter (MSB to LSB)

Get enumerated values variant

Checks if the value of the field is ENABLE

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Checks if the value of the field is DIV8

Bit 9 - Early wakeup interrupt

Bits 0:6 - 7-bit window value

Bits 7:8 - Timer base

Get enumerated values variant

Checks if the value of the field is PENDING

Checks if the value of the field is FINISHED

Bit 0 - Early wakeup interrupt flag

Bit 0 - Comparator 1 enable bit

Bits 2:3 - Power Mode of the comparator 1

Bits 4:6 - Comparator 1 Input Minus connection configuration bit

Bit 7 - Comparator1 input plus selection bit

Bit 15 - Comparator 1 polarity selection bit

Bits 16:17 - Comparator 1 hysteresis selection bits

Bits 18:20 - Comparator 1 blanking source selection bits

Bit 22 - Scaler bridge enable

Bit 23 - Voltage scaler enable bit

Bit 30 - Comparator 1 output status bit

Bit 0 - Comparator 2 enable bit

Bits 2:3 - Power Mode of the comparator 2

Bits 4:6 - Comparator 2 Input Minus connection configuration bit

Bit 7 - Comparator 2 Input Plus connection configuration bit

Bit 9 - Windows mode selection bit

Bit 15 - Comparator 2 polarity selection bit

Bits 16:17 - Comparator 2 hysteresis selection bits

Bits 18:20 - Comparator 2 blanking source selection bits

Bit 22 - Scaler bridge enable

Bit 23 - Voltage scaler enable bit

Bit 30 - Comparator 2 output status bit

Bits 8:23 - code segment start address

Bits 8:21 - code segment length

Bits 8:23 - Non-volatile data segment start address

Bits 8:21 - Non-volatile data segment length

Bits 6:15 - Volatile data segment start address

Bits 6:15 - Non-volatile data segment length

Bit 2 - Volatile data execution

Bit 1 - Volatile data shared

Bit 0 - Firewall pre alarm

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FILTER1

Checks if the value of the field is FILTER2

Checks if the value of the field is FILTER3

Checks if the value of the field is FILTER4

Checks if the value of the field is FILTER5

Checks if the value of the field is FILTER6

Checks if the value of the field is FILTER7

Checks if the value of the field is FILTER8

Checks if the value of the field is FILTER9

Checks if the value of the field is FILTER10

Checks if the value of the field is FILTER11

Checks if the value of the field is FILTER12

Checks if the value of the field is FILTER13

Checks if the value of the field is FILTER14

Checks if the value of the field is FILTER15

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 0 - Peripheral enable

Bit 1 - TX Interrupt enable

Bit 2 - RX Interrupt enable

Bit 3 - Address match interrupt enable (slave only)

Bit 4 - Not acknowledge received interrupt enable

Bit 5 - STOP detection Interrupt enable

Bit 6 - Transfer Complete interrupt enable

Bit 7 - Error interrupts enable

Bits 8:11 - Digital noise filter

Bit 12 - Analog noise filter OFF

Bit 14 - DMA transmission requests enable

Bit 15 - DMA reception requests enable

Bit 16 - Slave byte control

Bit 17 - Clock stretching disable

Bit 18 - Wakeup from STOP enable

Bit 19 - General call enable

Bit 20 - SMBus Host address enable

Bit 21 - SMBus Device Default address enable

Bit 22 - SMBUS alert enable

Bit 23 - PEC enable

Get enumerated values variant

Checks if the value of the field is NOPEC

Checks if the value of the field is PEC

Get enumerated values variant

Checks if the value of the field is SOFTWARE

Checks if the value of the field is AUTOMATIC

Get enumerated values variant

Checks if the value of the field is COMPLETED

Checks if the value of the field is NOTCOMPLETED

Get enumerated values variant

Checks if the value of the field is ACK

Checks if the value of the field is NACK

Get enumerated values variant

Checks if the value of the field is NOSTOP

Checks if the value of the field is STOP

Get enumerated values variant

Checks if the value of the field is NOSTART

Checks if the value of the field is START

Get enumerated values variant

Checks if the value of the field is COMPLETE

Checks if the value of the field is PARTIAL

Get enumerated values variant

Checks if the value of the field is BIT7

Checks if the value of the field is BIT10

Get enumerated values variant

Checks if the value of the field is WRITE

Checks if the value of the field is READ

Bit 26 - Packet error checking byte

Bit 25 - Automatic end mode (master mode)

Bit 24 - NBYTES reload mode

Bits 16:23 - Number of bytes

Bit 15 - NACK generation (slave mode)

Bit 14 - Stop generation (master mode)

Bit 13 - Start generation

Bit 12 - 10-bit address header only read direction (master receiver mode)

Bit 11 - 10-bit addressing mode (master mode)

Bit 10 - Transfer direction (master mode)

Bits 0:9 - Slave address bit (master mode)

Get enumerated values variant

Checks if the value of the field is BIT7

Checks if the value of the field is BIT10

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bits 0:9 - Interface address

Bit 10 - Own Address 1 10-bit mode

Bit 15 - Own Address 1 enable

Get enumerated values variant

Checks if the value of the field is NOMASK

Checks if the value of the field is MASK1

Checks if the value of the field is MASK2

Checks if the value of the field is MASK3

Checks if the value of the field is MASK4

Checks if the value of the field is MASK5

Checks if the value of the field is MASK6

Checks if the value of the field is MASK7

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bits 1:7 - Interface address

Bits 8:10 - Own Address 2 masks

Bit 15 - Own Address 2 enable

Bits 0:7 - SCL low period (master mode)

Bits 8:15 - SCL high period (master mode)

Bits 16:19 - Data hold time

Bits 20:23 - Data setup time

Bits 28:31 - Timing prescaler

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bits 0:11 - Bus timeout A

Bit 12 - Idle clock timeout detection

Bit 15 - Clock timeout enable

Bits 16:27 - Bus timeout B

Bit 31 - Extended clock timeout enable

Get enumerated values variant

Checks if the value of the field is WRITE

Checks if the value of the field is READ

Get enumerated values variant

Checks if the value of the field is NOTBUSY

Checks if the value of the field is BUSY

Get enumerated values variant

Checks if the value of the field is NOALERT

Checks if the value of the field is ALERT

Get enumerated values variant

Checks if the value of the field is NOTIMEOUT

Checks if the value of the field is TIMEOUT

Get enumerated values variant

[src]
pub fn is_match_(&self) -> bool

Checks if the value of the field is MATCH

Checks if the value of the field is NOMATCH

Get enumerated values variant

Checks if the value of the field is NOOVERRUN

Checks if the value of the field is OVERRUN

Get enumerated values variant

Checks if the value of the field is NOTLOST

Checks if the value of the field is LOST

Get enumerated values variant

Checks if the value of the field is NOERROR

Checks if the value of the field is ERROR

Get enumerated values variant

Checks if the value of the field is NOTCOMPLETE

Checks if the value of the field is COMPLETE

Get enumerated values variant

Checks if the value of the field is NOTCOMPLETE

Checks if the value of the field is COMPLETE

Get enumerated values variant

Checks if the value of the field is NOSTOP

Checks if the value of the field is STOP

Get enumerated values variant

Checks if the value of the field is NONACK

Checks if the value of the field is NACK

Get enumerated values variant

Checks if the value of the field is NOTMATCH

[src]
pub fn is_match_(&self) -> bool

Checks if the value of the field is MATCH

Get enumerated values variant

Checks if the value of the field is EMPTY

Checks if the value of the field is NOTEMPTY

Get enumerated values variant

Checks if the value of the field is NOTEMPTY

Checks if the value of the field is EMPTY

Get enumerated values variant

Checks if the value of the field is NOTEMPTY

Checks if the value of the field is EMPTY

Bits 17:23 - Address match code (Slave mode)

Bit 16 - Transfer direction (Slave mode)

Bit 15 - Bus busy

Bit 13 - SMBus alert

Bit 12 - Timeout or t_low detection flag

Bit 11 - PEC Error in reception

Bit 10 - Overrun/Underrun (slave mode)

Bit 9 - Arbitration lost

Bit 8 - Bus error

Bit 7 - Transfer Complete Reload

Bit 6 - Transfer Complete (master mode)

Bit 5 - Stop detection flag

Bit 4 - Not acknowledge received flag

Bit 3 - Address matched (slave mode)

Bit 2 - Receive data register not empty (receivers)

Bit 1 - Transmit interrupt status (transmitters)

Bit 0 - Transmit data register empty (transmitters)

Bits 0:7 - Packet error checking register

Bits 0:7 - 8-bit receive data

Bits 0:7 - 8-bit transmit data

Bits 0:2 - Latency

Bit 8 - Prefetch enable

Bit 9 - Instruction cache enable

Bit 10 - Data cache enable

Bit 11 - Instruction cache reset

Bit 12 - Data cache reset

Bit 13 - Flash Power-down mode during Low-power run mode

Bit 14 - Flash Power-down mode during Low-power sleep mode

Bit 0 - End of operation

Bit 1 - Operation error

Bit 3 - Programming error

Bit 4 - Write protected error

Bit 5 - Programming alignment error

Bit 6 - Size error

Bit 7 - Programming sequence error

Bit 8 - Fast programming data miss error

Bit 9 - Fast programming error

Bit 14 - PCROP read error

Bit 15 - Option validity error

Bit 16 - Busy

Bit 0 - Programming

Bit 1 - Page erase

Bit 2 - Bank 1 Mass erase

Bits 3:10 - Page number

Bit 11 - Bank erase

Bit 15 - Bank 2 Mass erase

Bit 16 - Start

Bit 17 - Options modification start

Bit 18 - Fast programming

Bit 24 - End of operation interrupt enable

Bit 25 - Error interrupt enable

Bit 26 - PCROP read error interrupt enable

Bit 27 - Force the option byte loading

Bit 30 - Options Lock

Bit 31 - FLASH_CR Lock

Bits 0:18 - ECC fail address

Bit 19 - ECC fail bank

Bit 20 - System Flash ECC fail

Bit 24 - ECC correction interrupt enable

Bit 30 - ECC correction

Bit 31 - ECC detection

Bits 0:7 - Read protection level

Bits 8:10 - BOR reset Level

Bit 12 - nRST_STOP

Bit 13 - nRST_STDBY

Bit 16 - Independent watchdog selection

Bit 17 - Independent watchdog counter freeze in Stop mode

Bit 18 - Independent watchdog counter freeze in Standby mode

Bit 19 - Window watchdog selection

Bit 20 - Dual-bank boot

Bit 21 - Dual-Bank on 512 KB or 256 KB Flash memory devices

Bit 23 - Boot configuration

Bit 24 - SRAM2 parity check enable

Bit 25 - SRAM2 Erase when system reset

Bit 26 - Software BOOT0

Bit 27 - nBOOT0 option bit

Bits 0:15 - Bank 1 PCROP area start offset

Bits 0:15 - Bank 1 PCROP area end offset

Bit 31 - PCROP area preserved when RDP level decreased

Bits 0:7 - Bank 1 WRP first area start offset

Bits 16:23 - Bank 1 WRP first area A end offset

Bits 16:23 - Bank 1 WRP second area B end offset

Bits 0:7 - Bank 1 WRP second area B start offset

Bits 0:15 - Bank 2 PCROP area start offset

Bits 0:15 - Bank 2 PCROP area end offset

Bits 0:7 - Bank 2 WRP first area A start offset

Bits 16:23 - Bank 2 WRP first area A end offset

Bits 0:7 - Bank 2 WRP second area B start offset

Bits 16:23 - Bank 2 WRP second area B end offset

Bit 14 - Low-power run

Bits 9:10 - Voltage scaling range selection

Bit 8 - Disable backup domain write protection

Bits 0:2 - Low-power mode selection

Bit 10 - VDDUSB USB supply valid

Bit 9 - VDDIO2 Independent I/Os supply valid

Bit 7 - Peripheral voltage monitoring 4 enable: VDDA vs. 2.2V

Bit 6 - Peripheral voltage monitoring 3 enable: VDDA vs. 1.62V

Bit 5 - Peripheral voltage monitoring 2 enable: VDDIO2 vs. 0.9V

Bit 4 - Peripheral voltage monitoring 1 enable: VDDUSB vs. 1.2V

Bits 1:3 - Power voltage detector level selection

Bit 0 - Power voltage detector enable

Bit 15 - Enable internal wakeup line

Bit 10 - Apply pull-up and pull-down configuration

Bit 8 - SRAM2 retention in Standby mode

Bit 4 - Enable Wakeup pin WKUP5

Bit 3 - Enable Wakeup pin WKUP4

Bit 2 - Enable Wakeup pin WKUP3

Bit 1 - Enable Wakeup pin WKUP2

Bit 0 - Enable Wakeup pin WKUP1

Bit 9 - VBAT battery charging resistor selection

Bit 8 - VBAT battery charging enable

Bit 4 - Wakeup pin WKUP5 polarity

Bit 3 - Wakeup pin WKUP4 polarity

Bit 2 - Wakeup pin WKUP3 polarity

Bit 1 - Wakeup pin WKUP2 polarity

Bit 0 - Wakeup pin WKUP1 polarity

Bit 15 - Wakeup flag internal

Bit 8 - Standby flag

Bit 4 - Wakeup flag 5

Bit 3 - Wakeup flag 4

Bit 2 - Wakeup flag 3

Bit 1 - Wakeup flag 2

Bit 0 - Wakeup flag 1

Bit 15 - Peripheral voltage monitoring output: VDDA vs. 2.2 V

Bit 14 - Peripheral voltage monitoring output: VDDA vs. 1.62 V

Bit 13 - Peripheral voltage monitoring output: VDDIO2 vs. 0.9 V

Bit 12 - Peripheral voltage monitoring output: VDDUSB vs. 1.2 V

Bit 11 - Power voltage detector output

Bit 10 - Voltage scaling flag

Bit 9 - Low-power regulator flag

Bit 8 - Low-power regulator started

Bit 15 - Port A pull-up bit y (y=0..15)

Bit 14 - Port A pull-up bit y (y=0..15)

Bit 13 - Port A pull-up bit y (y=0..15)

Bit 12 - Port A pull-up bit y (y=0..15)

Bit 11 - Port A pull-up bit y (y=0..15)

Bit 10 - Port A pull-up bit y (y=0..15)

Bit 9 - Port A pull-up bit y (y=0..15)

Bit 8 - Port A pull-up bit y (y=0..15)

Bit 7 - Port A pull-up bit y (y=0..15)

Bit 6 - Port A pull-up bit y (y=0..15)

Bit 5 - Port A pull-up bit y (y=0..15)

Bit 4 - Port A pull-up bit y (y=0..15)

Bit 3 - Port A pull-up bit y (y=0..15)

Bit 2 - Port A pull-up bit y (y=0..15)

Bit 1 - Port A pull-up bit y (y=0..15)

Bit 0 - Port A pull-up bit y (y=0..15)

Bit 15 - Port A pull-down bit y (y=0..15)

Bit 14 - Port A pull-down bit y (y=0..15)

Bit 13 - Port A pull-down bit y (y=0..15)

Bit 12 - Port A pull-down bit y (y=0..15)

Bit 11 - Port A pull-down bit y (y=0..15)

Bit 10 - Port A pull-down bit y (y=0..15)

Bit 9 - Port A pull-down bit y (y=0..15)

Bit 8 - Port A pull-down bit y (y=0..15)

Bit 7 - Port A pull-down bit y (y=0..15)

Bit 6 - Port A pull-down bit y (y=0..15)

Bit 5 - Port A pull-down bit y (y=0..15)

Bit 4 - Port A pull-down bit y (y=0..15)

Bit 3 - Port A pull-down bit y (y=0..15)

Bit 2 - Port A pull-down bit y (y=0..15)

Bit 1 - Port A pull-down bit y (y=0..15)

Bit 0 - Port A pull-down bit y (y=0..15)

Bit 15 - Port B pull-up bit y (y=0..15)

Bit 14 - Port B pull-up bit y (y=0..15)

Bit 13 - Port B pull-up bit y (y=0..15)

Bit 12 - Port B pull-up bit y (y=0..15)

Bit 11 - Port B pull-up bit y (y=0..15)

Bit 10 - Port B pull-up bit y (y=0..15)

Bit 9 - Port B pull-up bit y (y=0..15)

Bit 8 - Port B pull-up bit y (y=0..15)

Bit 7 - Port B pull-up bit y (y=0..15)

Bit 6 - Port B pull-up bit y (y=0..15)

Bit 5 - Port B pull-up bit y (y=0..15)

Bit 4 - Port B pull-up bit y (y=0..15)

Bit 3 - Port B pull-up bit y (y=0..15)

Bit 2 - Port B pull-up bit y (y=0..15)

Bit 1 - Port B pull-up bit y (y=0..15)

Bit 0 - Port B pull-up bit y (y=0..15)

Bit 15 - Port B pull-down bit y (y=0..15)

Bit 14 - Port B pull-down bit y (y=0..15)

Bit 13 - Port B pull-down bit y (y=0..15)

Bit 12 - Port B pull-down bit y (y=0..15)

Bit 11 - Port B pull-down bit y (y=0..15)

Bit 10 - Port B pull-down bit y (y=0..15)

Bit 9 - Port B pull-down bit y (y=0..15)

Bit 8 - Port B pull-down bit y (y=0..15)

Bit 7 - Port B pull-down bit y (y=0..15)

Bit 6 - Port B pull-down bit y (y=0..15)

Bit 5 - Port B pull-down bit y (y=0..15)

Bit 4 - Port B pull-down bit y (y=0..15)

Bit 3 - Port B pull-down bit y (y=0..15)

Bit 2 - Port B pull-down bit y (y=0..15)

Bit 1 - Port B pull-down bit y (y=0..15)

Bit 0 - Port B pull-down bit y (y=0..15)

Bit 15 - Port C pull-up bit y (y=0..15)

Bit 14 - Port C pull-up bit y (y=0..15)

Bit 13 - Port C pull-up bit y (y=0..15)

Bit 12 - Port C pull-up bit y (y=0..15)

Bit 11 - Port C pull-up bit y (y=0..15)

Bit 10 - Port C pull-up bit y (y=0..15)

Bit 9 - Port C pull-up bit y (y=0..15)

Bit 8 - Port C pull-up bit y (y=0..15)

Bit 7 - Port C pull-up bit y (y=0..15)

Bit 6 - Port C pull-up bit y (y=0..15)

Bit 5 - Port C pull-up bit y (y=0..15)

Bit 4 - Port C pull-up bit y (y=0..15)

Bit 3 - Port C pull-up bit y (y=0..15)

Bit 2 - Port C pull-up bit y (y=0..15)

Bit 1 - Port C pull-up bit y (y=0..15)

Bit 0 - Port C pull-up bit y (y=0..15)

Bit 15 - Port C pull-down bit y (y=0..15)

Bit 14 - Port C pull-down bit y (y=0..15)

Bit 13 - Port C pull-down bit y (y=0..15)

Bit 12 - Port C pull-down bit y (y=0..15)

Bit 11 - Port C pull-down bit y (y=0..15)

Bit 10 - Port C pull-down bit y (y=0..15)

Bit 9 - Port C pull-down bit y (y=0..15)

Bit 8 - Port C pull-down bit y (y=0..15)

Bit 7 - Port C pull-down bit y (y=0..15)

Bit 6 - Port C pull-down bit y (y=0..15)

Bit 5 - Port C pull-down bit y (y=0..15)

Bit 4 - Port C pull-down bit y (y=0..15)

Bit 3 - Port C pull-down bit y (y=0..15)

Bit 2 - Port C pull-down bit y (y=0..15)

Bit 1 - Port C pull-down bit y (y=0..15)

Bit 0 - Port C pull-down bit y (y=0..15)

Bit 15 - Port D pull-up bit y (y=0..15)

Bit 14 - Port D pull-up bit y (y=0..15)

Bit 13 - Port D pull-up bit y (y=0..15)

Bit 12 - Port D pull-up bit y (y=0..15)

Bit 11 - Port D pull-up bit y (y=0..15)

Bit 10 - Port D pull-up bit y (y=0..15)

Bit 9 - Port D pull-up bit y (y=0..15)

Bit 8 - Port D pull-up bit y (y=0..15)

Bit 7 - Port D pull-up bit y (y=0..15)

Bit 6 - Port D pull-up bit y (y=0..15)

Bit 5 - Port D pull-up bit y (y=0..15)

Bit 4 - Port D pull-up bit y (y=0..15)

Bit 3 - Port D pull-up bit y (y=0..15)

Bit 2 - Port D pull-up bit y (y=0..15)

Bit 1 - Port D pull-up bit y (y=0..15)

Bit 0 - Port D pull-up bit y (y=0..15)

Bit 15 - Port D pull-down bit y (y=0..15)

Bit 14 - Port D pull-down bit y (y=0..15)

Bit 13 - Port D pull-down bit y (y=0..15)

Bit 12 - Port D pull-down bit y (y=0..15)

Bit 11 - Port D pull-down bit y (y=0..15)

Bit 10 - Port D pull-down bit y (y=0..15)

Bit 9 - Port D pull-down bit y (y=0..15)

Bit 8 - Port D pull-down bit y (y=0..15)

Bit 7 - Port D pull-down bit y (y=0..15)

Bit 6 - Port D pull-down bit y (y=0..15)

Bit 5 - Port D pull-down bit y (y=0..15)

Bit 4 - Port D pull-down bit y (y=0..15)

Bit 3 - Port D pull-down bit y (y=0..15)

Bit 2 - Port D pull-down bit y (y=0..15)

Bit 1 - Port D pull-down bit y (y=0..15)

Bit 0 - Port D pull-down bit y (y=0..15)

Bit 15 - Port E pull-up bit y (y=0..15)

Bit 14 - Port E pull-up bit y (y=0..15)

Bit 13 - Port E pull-up bit y (y=0..15)

Bit 12 - Port E pull-up bit y (y=0..15)

Bit 11 - Port E pull-up bit y (y=0..15)

Bit 10 - Port E pull-up bit y (y=0..15)

Bit 9 - Port E pull-up bit y (y=0..15)

Bit 8 - Port E pull-up bit y (y=0..15)

Bit 7 - Port E pull-up bit y (y=0..15)

Bit 6 - Port E pull-up bit y (y=0..15)

Bit 5 - Port E pull-up bit y (y=0..15)

Bit 4 - Port E pull-up bit y (y=0..15)

Bit 3 - Port E pull-up bit y (y=0..15)

Bit 2 - Port E pull-up bit y (y=0..15)

Bit 1 - Port E pull-up bit y (y=0..15)

Bit 0 - Port E pull-up bit y (y=0..15)

Bit 15 - Port E pull-down bit y (y=0..15)

Bit 14 - Port E pull-down bit y (y=0..15)

Bit 13 - Port E pull-down bit y (y=0..15)

Bit 12 - Port E pull-down bit y (y=0..15)

Bit 11 - Port E pull-down bit y (y=0..15)

Bit 10 - Port E pull-down bit y (y=0..15)

Bit 9 - Port E pull-down bit y (y=0..15)

Bit 8 - Port E pull-down bit y (y=0..15)

Bit 7 - Port E pull-down bit y (y=0..15)

Bit 6 - Port E pull-down bit y (y=0..15)

Bit 5 - Port E pull-down bit y (y=0..15)

Bit 4 - Port E pull-down bit y (y=0..15)

Bit 3 - Port E pull-down bit y (y=0..15)

Bit 2 - Port E pull-down bit y (y=0..15)

Bit 1 - Port E pull-down bit y (y=0..15)

Bit 0 - Port E pull-down bit y (y=0..15)

Bit 15 - Port F pull-up bit y (y=0..15)

Bit 14 - Port F pull-up bit y (y=0..15)

Bit 13 - Port F pull-up bit y (y=0..15)

Bit 12 - Port F pull-up bit y (y=0..15)

Bit 11 - Port F pull-up bit y (y=0..15)

Bit 10 - Port F pull-up bit y (y=0..15)

Bit 9 - Port F pull-up bit y (y=0..15)

Bit 8 - Port F pull-up bit y (y=0..15)

Bit 7 - Port F pull-up bit y (y=0..15)

Bit 6 - Port F pull-up bit y (y=0..15)

Bit 5 - Port F pull-up bit y (y=0..15)

Bit 4 - Port F pull-up bit y (y=0..15)

Bit 3 - Port F pull-up bit y (y=0..15)

Bit 2 - Port F pull-up bit y (y=0..15)

Bit 1 - Port F pull-up bit y (y=0..15)

Bit 0 - Port F pull-up bit y (y=0..15)

Bit 15 - Port F pull-down bit y (y=0..15)

Bit 14 - Port F pull-down bit y (y=0..15)

Bit 13 - Port F pull-down bit y (y=0..15)

Bit 12 - Port F pull-down bit y (y=0..15)

Bit 11 - Port F pull-down bit y (y=0..15)

Bit 10 - Port F pull-down bit y (y=0..15)

Bit 9 - Port F pull-down bit y (y=0..15)

Bit 8 - Port F pull-down bit y (y=0..15)

Bit 7 - Port F pull-down bit y (y=0..15)

Bit 6 - Port F pull-down bit y (y=0..15)

Bit 5 - Port F pull-down bit y (y=0..15)

Bit 4 - Port F pull-down bit y (y=0..15)

Bit 3 - Port F pull-down bit y (y=0..15)

Bit 2 - Port F pull-down bit y (y=0..15)

Bit 1 - Port F pull-down bit y (y=0..15)

Bit 0 - Port F pull-down bit y (y=0..15)

Bit 15 - Port G pull-up bit y (y=0..15)

Bit 14 - Port G pull-up bit y (y=0..15)

Bit 13 - Port G pull-up bit y (y=0..15)

Bit 12 - Port G pull-up bit y (y=0..15)

Bit 11 - Port G pull-up bit y (y=0..15)

Bit 10 - Port G pull-up bit y (y=0..15)

Bit 9 - Port G pull-up bit y (y=0..15)

Bit 8 - Port G pull-up bit y (y=0..15)

Bit 7 - Port G pull-up bit y (y=0..15)

Bit 6 - Port G pull-up bit y (y=0..15)

Bit 5 - Port G pull-up bit y (y=0..15)

Bit 4 - Port G pull-up bit y (y=0..15)

Bit 3 - Port G pull-up bit y (y=0..15)

Bit 2 - Port G pull-up bit y (y=0..15)

Bit 1 - Port G pull-up bit y (y=0..15)

Bit 0 - Port G pull-up bit y (y=0..15)

Bit 15 - Port G pull-down bit y (y=0..15)

Bit 14 - Port G pull-down bit y (y=0..15)

Bit 13 - Port G pull-down bit y (y=0..15)

Bit 12 - Port G pull-down bit y (y=0..15)

Bit 11 - Port G pull-down bit y (y=0..15)

Bit 10 - Port G pull-down bit y (y=0..15)

Bit 9 - Port G pull-down bit y (y=0..15)

Bit 8 - Port G pull-down bit y (y=0..15)

Bit 7 - Port G pull-down bit y (y=0..15)

Bit 6 - Port G pull-down bit y (y=0..15)

Bit 5 - Port G pull-down bit y (y=0..15)

Bit 4 - Port G pull-down bit y (y=0..15)

Bit 3 - Port G pull-down bit y (y=0..15)

Bit 2 - Port G pull-down bit y (y=0..15)

Bit 1 - Port G pull-down bit y (y=0..15)

Bit 0 - Port G pull-down bit y (y=0..15)

Bit 1 - Port H pull-up bit y (y=0..1)

Bit 0 - Port H pull-up bit y (y=0..1)

Bit 1 - Port H pull-down bit y (y=0..1)

Bit 0 - Port H pull-down bit y (y=0..1)

Bit 8 - Flash Bank mode selection

Bit 3 - QUADSPI memory mapping swap

Bits 0:2 - Memory mapping selection

Bits 26:31 - Floating Point Unit interrupts enable bits

Bit 22 - I2C3 Fast-mode Plus driving capability activation

Bit 21 - I2C2 Fast-mode Plus driving capability activation

Bit 20 - I2C1 Fast-mode Plus driving capability activation

Bit 19 - Fast-mode Plus (Fm+) driving capability activation on PB9

Bit 18 - Fast-mode Plus (Fm+) driving capability activation on PB8

Bit 17 - Fast-mode Plus (Fm+) driving capability activation on PB7

Bit 16 - Fast-mode Plus (Fm+) driving capability activation on PB6

Bit 8 - I/O analog switch voltage booster enable

Bit 0 - Firewall disable

Bits 12:14 - EXTI 3 configuration bits

Bits 8:10 - EXTI 2 configuration bits

Bits 4:6 - EXTI 1 configuration bits

Bits 0:2 - EXTI 0 configuration bits

Bits 12:14 - EXTI 7 configuration bits

Bits 8:10 - EXTI 6 configuration bits

Bits 4:6 - EXTI 5 configuration bits

Bits 0:2 - EXTI 4 configuration bits

Bits 12:14 - EXTI 11 configuration bits

Bits 8:10 - EXTI 10 configuration bits

Bits 4:6 - EXTI 9 configuration bits

Bits 0:2 - EXTI 8 configuration bits

Bits 12:14 - EXTI15 configuration bits

Bits 8:10 - EXTI14 configuration bits

Bits 4:6 - EXTI13 configuration bits

Bits 0:2 - EXTI12 configuration bits

Bit 1 - SRAM2 busy by erase operation

Bit 0 - SRAM2 Erase

Bit 8 - SRAM2 parity error flag

Bit 3 - Interrupt enable

Bit 2 - Random number generator enable

Bit 6 - Seed error interrupt status

Bit 5 - Clock error interrupt status

Bit 2 - Seed error current status

Bit 1 - Clock error current status

Bit 0 - Data ready

Bits 0:31 - Random data

Bit 12 - Enable DMA management of data output phase

Bit 11 - Enable DMA management of data input phase

Bit 10 - Error interrupt enable

Bit 9 - CCF flag interrupt enable

Bit 8 - Error clear

Bit 7 - Computation Complete Flag Clear

Bits 5:6 - AES chaining mode

Bits 3:4 - AES operating mode

Bits 1:2 - Data type selection (for data in and data out to/from the cryptographic block)

Bit 0 - AES enable

Bit 2 - Write error flag

Bit 1 - Read error flag

Bit 0 - Computation complete flag

Bits 0:31 - Data Input Register

Bits 0:31 - Data output register

Bits 0:31 - Data Output Register (LSB key [31:0])

Bits 0:31 - AES key register (key [63:32])

Bits 0:31 - AES key register (key [95:64])

Bits 0:31 - AES key register (MSB key [127:96])

Bits 0:31 - initialization vector register (LSB IVR [31:0])

Bits 0:31 - Initialization Vector Register (IVR [63:32])

Bits 0:31 - Initialization Vector Register (IVR [95:64])

Bits 0:31 - Initialization Vector Register (MSB IVR [127:96])

Bit 10 - JQOVF

Bit 9 - AWD3

Bit 8 - AWD2

Bit 7 - AWD1

Bit 6 - JEOS

Bit 5 - JEOC

Bit 4 - OVR

Bit 3 - EOS

Bit 2 - EOC

Bit 1 - EOSMP

Bit 0 - ADRDY

Bit 10 - JQOVFIE

Bit 9 - AWD3IE

Bit 8 - AWD2IE

Bit 7 - AWD1IE

Bit 6 - JEOSIE

Bit 5 - JEOCIE

Bit 4 - OVRIE

Bit 3 - EOSIE

Bit 2 - EOCIE

Bit 1 - EOSMPIE

Bit 0 - ADRDYIE

Bit 31 - ADCAL

Bit 30 - ADCALDIF

Bit 29 - DEEPPWD

Bit 28 - ADVREGEN

Bit 5 - JADSTP

Bit 4 - ADSTP

Bit 3 - JADSTART

Bit 2 - ADSTART

Bit 1 - ADDIS

Bit 0 - ADEN

Bits 26:30 - AWDCH1CH

Bit 25 - JAUTO

Bit 24 - JAWD1EN

Bit 23 - AWD1EN

Bit 22 - AWD1SGL

Bit 21 - JQM

Bit 20 - JDISCEN

Bits 17:19 - DISCNUM

Bit 16 - DISCEN

Bit 15 - AUTOFF

Bit 14 - AUTDLY

Bit 13 - CONT

Bit 12 - OVRMOD

Bits 10:11 - EXTEN

Bits 6:9 - EXTSEL

Bit 5 - ALIGN

Bits 3:4 - RES

Bit 1 - DMACFG

Bit 0 - DMAEN

Bit 10 - EXTEN

Bit 9 - EXTSEL

Bits 5:8 - ALIGN

Bits 2:4 - RES

Bit 1 - DMACFG

Bit 0 - DMAEN

Bits 27:29 - Channel 9 sampling time selection

Bits 24:26 - Channel 8 sampling time selection

Bits 21:23 - Channel 7 sampling time selection

Bits 18:20 - Channel 6 sampling time selection

Bits 15:17 - Channel 5 sampling time selection

Bits 12:14 - Channel 4 sampling time selection

Bits 9:11 - Channel 3 sampling time selection

Bits 6:8 - Channel 2 sampling time selection

Bits 3:5 - Channel 1 sampling time selection

Bits 0:2 - Channel 0 sampling time selection

Bits 24:26 - Channel 18 sampling time selection

Bits 21:23 - Channel 17 sampling time selection

Bits 18:20 - Channel 16 sampling time selection

Bits 15:17 - Channel 15 sampling time selection

Bits 12:14 - Channel 14 sampling time selection

Bits 9:11 - Channel 13 sampling time selection

Bits 6:8 - Channel 12 sampling time selection

Bits 3:5 - Channel 11 sampling time selection

Bits 0:2 - Channel 10 sampling time selection

Bits 16:27 - HT1

Bits 0:11 - LT1

Bits 16:23 - HT2

Bits 0:7 - LT2

Bits 16:23 - HT3

Bits 0:7 - LT3

Bits 24:28 - SQ4

Bits 18:22 - SQ3

Bits 12:16 - SQ2

Bits 6:10 - SQ1

Bits 0:3 - Regular channel sequence length

Bits 24:28 - SQ9

Bits 18:22 - SQ8

Bits 12:16 - SQ7

Bits 6:10 - SQ6

Bits 0:4 - SQ5

Bits 24:28 - SQ14

Bits 18:22 - SQ13

Bits 12:16 - SQ12

Bits 6:10 - SQ11

Bits 0:4 - SQ10

Bits 6:10 - SQ16

Bits 0:4 - SQ15

Bits 0:15 - regularDATA

Bits 26:30 - JSQ4

Bits 20:24 - JSQ3

Bits 14:18 - JSQ2

Bits 8:12 - JSQ1

Bits 6:7 - JEXTEN

Bits 2:5 - JEXTSEL

Bits 0:1 - JL

Bit 31 - OFFSET1_EN

Bits 26:30 - OFFSET1_CH

Bits 0:11 - OFFSET1

Bit 31 - OFFSET2_EN

Bits 26:30 - OFFSET2_CH

Bits 0:11 - OFFSET2

Bit 31 - OFFSET3_EN

Bits 26:30 - OFFSET3_CH

Bits 0:11 - OFFSET3

Bit 31 - OFFSET4_EN

Bits 26:30 - OFFSET4_CH

Bits 0:11 - OFFSET4

Bits 0:15 - JDATA1

Bits 0:15 - JDATA2

Bits 0:15 - JDATA3

Bits 0:15 - JDATA4

Bits 1:18 - AWD2CH

Bits 1:18 - AWD3CH

Bits 1:15 - Differential mode for channels 15 to 1

Bits 16:18 - Differential mode for channels 18 to 16

Bits 16:22 - CALFACT_D

Bits 0:6 - CALFACT_S

Get enumerated values variant

Checks if the value of the field is INPUT

Checks if the value of the field is OUTPUT

Checks if the value of the field is ALTERNATE

Checks if the value of the field is ANALOG

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is PUSHPULL

Checks if the value of the field is OPENDRAIN

Bit 15 - Port x configuration bits (y = 0..15)

Bit 14 - Port x configuration bits (y = 0..15)

Bit 13 - Port x configuration bits (y = 0..15)

Bit 12 - Port x configuration bits (y = 0..15)

Bit 11 - Port x configuration bits (y = 0..15)

Bit 10 - Port x configuration bits (y = 0..15)

Bit 9 - Port x configuration bits (y = 0..15)

Bit 8 - Port x configuration bits (y = 0..15)

Bit 7 - Port x configuration bits (y = 0..15)

Bit 6 - Port x configuration bits (y = 0..15)

Bit 5 - Port x configuration bits (y = 0..15)

Bit 4 - Port x configuration bits (y = 0..15)

Bit 3 - Port x configuration bits (y = 0..15)

Bit 2 - Port x configuration bits (y = 0..15)

Bit 1 - Port x configuration bits (y = 0..15)

Bit 0 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is LOWSPEED

Checks if the value of the field is MEDIUMSPEED

Checks if the value of the field is HIGHSPEED

Checks if the value of the field is VERYHIGHSPEED

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is FLOATING

Checks if the value of the field is PULLUP

Checks if the value of the field is PULLDOWN

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Bit 15 - Port input data (y = 0..15)

Bit 14 - Port input data (y = 0..15)

Bit 13 - Port input data (y = 0..15)

Bit 12 - Port input data (y = 0..15)

Bit 11 - Port input data (y = 0..15)

Bit 10 - Port input data (y = 0..15)

Bit 9 - Port input data (y = 0..15)

Bit 8 - Port input data (y = 0..15)

Bit 7 - Port input data (y = 0..15)

Bit 6 - Port input data (y = 0..15)

Bit 5 - Port input data (y = 0..15)

Bit 4 - Port input data (y = 0..15)

Bit 3 - Port input data (y = 0..15)

Bit 2 - Port input data (y = 0..15)

Bit 1 - Port input data (y = 0..15)

Bit 0 - Port input data (y = 0..15)

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Bit 15 - Port output data (y = 0..15)

Bit 14 - Port output data (y = 0..15)

Bit 13 - Port output data (y = 0..15)

Bit 12 - Port output data (y = 0..15)

Bit 11 - Port output data (y = 0..15)

Bit 10 - Port output data (y = 0..15)

Bit 9 - Port output data (y = 0..15)

Bit 8 - Port output data (y = 0..15)

Bit 7 - Port output data (y = 0..15)

Bit 6 - Port output data (y = 0..15)

Bit 5 - Port output data (y = 0..15)

Bit 4 - Port output data (y = 0..15)

Bit 3 - Port output data (y = 0..15)

Bit 2 - Port output data (y = 0..15)

Bit 1 - Port output data (y = 0..15)

Bit 0 - Port output data (y = 0..15)

Get enumerated values variant

Checks if the value of the field is NOTACTIVE

Checks if the value of the field is ACTIVE

Get enumerated values variant

Checks if the value of the field is UNLOCKED

Checks if the value of the field is LOCKED

Get enumerated values variant

Checks if the value of the field is UNLOCKED

Checks if the value of the field is LOCKED

Bit 16 - Port x lock bit y (y= 0..15)

Bit 15 - Port x lock bit y (y= 0..15)

Bit 14 - Port x lock bit y (y= 0..15)

Bit 13 - Port x lock bit y (y= 0..15)

Bit 12 - Port x lock bit y (y= 0..15)

Bit 11 - Port x lock bit y (y= 0..15)

Bit 10 - Port x lock bit y (y= 0..15)

Bit 9 - Port x lock bit y (y= 0..15)

Bit 8 - Port x lock bit y (y= 0..15)

Bit 7 - Port x lock bit y (y= 0..15)

Bit 6 - Port x lock bit y (y= 0..15)

Bit 5 - Port x lock bit y (y= 0..15)

Bit 4 - Port x lock bit y (y= 0..15)

Bit 3 - Port x lock bit y (y= 0..15)

Bit 2 - Port x lock bit y (y= 0..15)

Bit 1 - Port x lock bit y (y= 0..15)

Bit 0 - Port x lock bit y (y= 0..15)

Get enumerated values variant

Checks if the value of the field is AF0

Checks if the value of the field is AF1

Checks if the value of the field is AF2

Checks if the value of the field is AF3

Checks if the value of the field is AF4

Checks if the value of the field is AF5

Checks if the value of the field is AF6

Checks if the value of the field is AF7

Checks if the value of the field is AF8

Checks if the value of the field is AF9

Checks if the value of the field is AF10

Checks if the value of the field is AF11

Checks if the value of the field is AF12

Checks if the value of the field is AF13

Checks if the value of the field is AF14

Checks if the value of the field is AF15

Bits 28:31 - Alternate function selection for port x bit y (y = 0..7)

Bits 24:27 - Alternate function selection for port x bit y (y = 0..7)

Bits 20:23 - Alternate function selection for port x bit y (y = 0..7)

Bits 16:19 - Alternate function selection for port x bit y (y = 0..7)

Bits 12:15 - Alternate function selection for port x bit y (y = 0..7)

Bits 8:11 - Alternate function selection for port x bit y (y = 0..7)

Bits 4:7 - Alternate function selection for port x bit y (y = 0..7)

Bits 0:3 - Alternate function selection for port x bit y (y = 0..7)

Get enumerated values variant

Checks if the value of the field is AF0

Checks if the value of the field is AF1

Checks if the value of the field is AF2

Checks if the value of the field is AF3

Checks if the value of the field is AF4

Checks if the value of the field is AF5

Checks if the value of the field is AF6

Checks if the value of the field is AF7

Checks if the value of the field is AF8

Checks if the value of the field is AF9

Checks if the value of the field is AF10

Checks if the value of the field is AF11

Checks if the value of the field is AF12

Checks if the value of the field is AF13

Checks if the value of the field is AF14

Checks if the value of the field is AF15

Bits 28:31 - Alternate function selection for port x bit y (y = 8..15)

Bits 24:27 - Alternate function selection for port x bit y (y = 8..15)

Bits 20:23 - Alternate function selection for port x bit y (y = 8..15)

Bits 16:19 - Alternate function selection for port x bit y (y = 8..15)

Bits 12:15 - Alternate function selection for port x bit y (y = 8..15)

Bits 8:11 - Alternate function selection for port x bit y (y = 8..15)

Bits 4:7 - Alternate function selection for port x bit y (y = 8..15)

Bits 0:3 - Alternate function selection for port x bit y (y = 8..15)

Get enumerated values variant

Checks if the value of the field is INPUT

Checks if the value of the field is OUTPUT

Checks if the value of the field is ALTERNATE

Checks if the value of the field is ANALOG

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is PUSHPULL

Checks if the value of the field is OPENDRAIN

Bit 15 - Port x configuration bits (y = 0..15)

Bit 14 - Port x configuration bits (y = 0..15)

Bit 13 - Port x configuration bits (y = 0..15)

Bit 12 - Port x configuration bits (y = 0..15)

Bit 11 - Port x configuration bits (y = 0..15)

Bit 10 - Port x configuration bits (y = 0..15)

Bit 9 - Port x configuration bits (y = 0..15)

Bit 8 - Port x configuration bits (y = 0..15)

Bit 7 - Port x configuration bits (y = 0..15)

Bit 6 - Port x configuration bits (y = 0..15)

Bit 5 - Port x configuration bits (y = 0..15)

Bit 4 - Port x configuration bits (y = 0..15)

Bit 3 - Port x configuration bits (y = 0..15)

Bit 2 - Port x configuration bits (y = 0..15)

Bit 1 - Port x configuration bits (y = 0..15)

Bit 0 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is LOWSPEED

Checks if the value of the field is MEDIUMSPEED

Checks if the value of the field is HIGHSPEED

Checks if the value of the field is VERYHIGHSPEED

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is FLOATING

Checks if the value of the field is PULLUP

Checks if the value of the field is PULLDOWN

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Bit 15 - Port input data (y = 0..15)

Bit 14 - Port input data (y = 0..15)

Bit 13 - Port input data (y = 0..15)

Bit 12 - Port input data (y = 0..15)

Bit 11 - Port input data (y = 0..15)

Bit 10 - Port input data (y = 0..15)

Bit 9 - Port input data (y = 0..15)

Bit 8 - Port input data (y = 0..15)

Bit 7 - Port input data (y = 0..15)

Bit 6 - Port input data (y = 0..15)

Bit 5 - Port input data (y = 0..15)

Bit 4 - Port input data (y = 0..15)

Bit 3 - Port input data (y = 0..15)

Bit 2 - Port input data (y = 0..15)

Bit 1 - Port input data (y = 0..15)

Bit 0 - Port input data (y = 0..15)

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Bit 15 - Port output data (y = 0..15)

Bit 14 - Port output data (y = 0..15)

Bit 13 - Port output data (y = 0..15)

Bit 12 - Port output data (y = 0..15)

Bit 11 - Port output data (y = 0..15)

Bit 10 - Port output data (y = 0..15)

Bit 9 - Port output data (y = 0..15)

Bit 8 - Port output data (y = 0..15)

Bit 7 - Port output data (y = 0..15)

Bit 6 - Port output data (y = 0..15)

Bit 5 - Port output data (y = 0..15)

Bit 4 - Port output data (y = 0..15)

Bit 3 - Port output data (y = 0..15)

Bit 2 - Port output data (y = 0..15)

Bit 1 - Port output data (y = 0..15)

Bit 0 - Port output data (y = 0..15)

Get enumerated values variant

Checks if the value of the field is NOTACTIVE

Checks if the value of the field is ACTIVE

Get enumerated values variant

Checks if the value of the field is UNLOCKED

Checks if the value of the field is LOCKED

Get enumerated values variant

Checks if the value of the field is UNLOCKED

Checks if the value of the field is LOCKED

Bit 16 - Port x lock bit y (y= 0..15)

Bit 15 - Port x lock bit y (y= 0..15)

Bit 14 - Port x lock bit y (y= 0..15)

Bit 13 - Port x lock bit y (y= 0..15)

Bit 12 - Port x lock bit y (y= 0..15)

Bit 11 - Port x lock bit y (y= 0..15)

Bit 10 - Port x lock bit y (y= 0..15)

Bit 9 - Port x lock bit y (y= 0..15)

Bit 8 - Port x lock bit y (y= 0..15)

Bit 7 - Port x lock bit y (y= 0..15)

Bit 6 - Port x lock bit y (y= 0..15)

Bit 5 - Port x lock bit y (y= 0..15)

Bit 4 - Port x lock bit y (y= 0..15)

Bit 3 - Port x lock bit y (y= 0..15)

Bit 2 - Port x lock bit y (y= 0..15)

Bit 1 - Port x lock bit y (y= 0..15)

Bit 0 - Port x lock bit y (y= 0..15)

Get enumerated values variant

Checks if the value of the field is AF0

Checks if the value of the field is AF1

Checks if the value of the field is AF2

Checks if the value of the field is AF3

Checks if the value of the field is AF4

Checks if the value of the field is AF5

Checks if the value of the field is AF6

Checks if the value of the field is AF7

Checks if the value of the field is AF8

Checks if the value of the field is AF9

Checks if the value of the field is AF10

Checks if the value of the field is AF11

Checks if the value of the field is AF12

Checks if the value of the field is AF13

Checks if the value of the field is AF14

Checks if the value of the field is AF15

Bits 28:31 - Alternate function selection for port x bit y (y = 0..7)

Bits 24:27 - Alternate function selection for port x bit y (y = 0..7)

Bits 20:23 - Alternate function selection for port x bit y (y = 0..7)

Bits 16:19 - Alternate function selection for port x bit y (y = 0..7)

Bits 12:15 - Alternate function selection for port x bit y (y = 0..7)

Bits 8:11 - Alternate function selection for port x bit y (y = 0..7)

Bits 4:7 - Alternate function selection for port x bit y (y = 0..7)

Bits 0:3 - Alternate function selection for port x bit y (y = 0..7)

Get enumerated values variant

Checks if the value of the field is AF0

Checks if the value of the field is AF1

Checks if the value of the field is AF2

Checks if the value of the field is AF3

Checks if the value of the field is AF4

Checks if the value of the field is AF5

Checks if the value of the field is AF6

Checks if the value of the field is AF7

Checks if the value of the field is AF8

Checks if the value of the field is AF9

Checks if the value of the field is AF10

Checks if the value of the field is AF11

Checks if the value of the field is AF12

Checks if the value of the field is AF13

Checks if the value of the field is AF14

Checks if the value of the field is AF15

Bits 28:31 - Alternate function selection for port x bit y (y = 8..15)

Bits 24:27 - Alternate function selection for port x bit y (y = 8..15)

Bits 20:23 - Alternate function selection for port x bit y (y = 8..15)

Bits 16:19 - Alternate function selection for port x bit y (y = 8..15)

Bits 12:15 - Alternate function selection for port x bit y (y = 8..15)

Bits 8:11 - Alternate function selection for port x bit y (y = 8..15)

Bits 4:7 - Alternate function selection for port x bit y (y = 8..15)

Bits 0:3 - Alternate function selection for port x bit y (y = 8..15)

Get enumerated values variant

Checks if the value of the field is INPUT

Checks if the value of the field is OUTPUT

Checks if the value of the field is ALTERNATE

Checks if the value of the field is ANALOG

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is PUSHPULL

Checks if the value of the field is OPENDRAIN

Bit 15 - Port x configuration bits (y = 0..15)

Bit 14 - Port x configuration bits (y = 0..15)

Bit 13 - Port x configuration bits (y = 0..15)

Bit 12 - Port x configuration bits (y = 0..15)

Bit 11 - Port x configuration bits (y = 0..15)

Bit 10 - Port x configuration bits (y = 0..15)

Bit 9 - Port x configuration bits (y = 0..15)

Bit 8 - Port x configuration bits (y = 0..15)

Bit 7 - Port x configuration bits (y = 0..15)

Bit 6 - Port x configuration bits (y = 0..15)

Bit 5 - Port x configuration bits (y = 0..15)

Bit 4 - Port x configuration bits (y = 0..15)

Bit 3 - Port x configuration bits (y = 0..15)

Bit 2 - Port x configuration bits (y = 0..15)

Bit 1 - Port x configuration bits (y = 0..15)

Bit 0 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is LOWSPEED

Checks if the value of the field is MEDIUMSPEED

Checks if the value of the field is HIGHSPEED

Checks if the value of the field is VERYHIGHSPEED

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is FLOATING

Checks if the value of the field is PULLUP

Checks if the value of the field is PULLDOWN

Bits 30:31 - Port x configuration bits (y = 0..15)

Bits 28:29 - Port x configuration bits (y = 0..15)

Bits 26:27 - Port x configuration bits (y = 0..15)

Bits 24:25 - Port x configuration bits (y = 0..15)

Bits 22:23 - Port x configuration bits (y = 0..15)

Bits 20:21 - Port x configuration bits (y = 0..15)

Bits 18:19 - Port x configuration bits (y = 0..15)

Bits 16:17 - Port x configuration bits (y = 0..15)

Bits 14:15 - Port x configuration bits (y = 0..15)

Bits 12:13 - Port x configuration bits (y = 0..15)

Bits 10:11 - Port x configuration bits (y = 0..15)

Bits 8:9 - Port x configuration bits (y = 0..15)

Bits 6:7 - Port x configuration bits (y = 0..15)

Bits 4:5 - Port x configuration bits (y = 0..15)

Bits 2:3 - Port x configuration bits (y = 0..15)

Bits 0:1 - Port x configuration bits (y = 0..15)

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Bit 15 - Port input data (y = 0..15)

Bit 14 - Port input data (y = 0..15)

Bit 13 - Port input data (y = 0..15)

Bit 12 - Port input data (y = 0..15)

Bit 11 - Port input data (y = 0..15)

Bit 10 - Port input data (y = 0..15)

Bit 9 - Port input data (y = 0..15)

Bit 8 - Port input data (y = 0..15)

Bit 7 - Port input data (y = 0..15)

Bit 6 - Port input data (y = 0..15)

Bit 5 - Port input data (y = 0..15)

Bit 4 - Port input data (y = 0..15)

Bit 3 - Port input data (y = 0..15)

Bit 2 - Port input data (y = 0..15)

Bit 1 - Port input data (y = 0..15)

Bit 0 - Port input data (y = 0..15)

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Bit 15 - Port output data (y = 0..15)

Bit 14 - Port output data (y = 0..15)

Bit 13 - Port output data (y = 0..15)

Bit 12 - Port output data (y = 0..15)

Bit 11 - Port output data (y = 0..15)

Bit 10 - Port output data (y = 0..15)

Bit 9 - Port output data (y = 0..15)

Bit 8 - Port output data (y = 0..15)

Bit 7 - Port output data (y = 0..15)

Bit 6 - Port output data (y = 0..15)

Bit 5 - Port output data (y = 0..15)

Bit 4 - Port output data (y = 0..15)

Bit 3 - Port output data (y = 0..15)

Bit 2 - Port output data (y = 0..15)

Bit 1 - Port output data (y = 0..15)

Bit 0 - Port output data (y = 0..15)

Get enumerated values variant

Checks if the value of the field is NOTACTIVE

Checks if the value of the field is ACTIVE

Get enumerated values variant

Checks if the value of the field is UNLOCKED

Checks if the value of the field is LOCKED

Get enumerated values variant

Checks if the value of the field is UNLOCKED

Checks if the value of the field is LOCKED

Bit 16 - Port x lock bit y (y= 0..15)

Bit 15 - Port x lock bit y (y= 0..15)

Bit 14 - Port x lock bit y (y= 0..15)

Bit 13 - Port x lock bit y (y= 0..15)

Bit 12 - Port x lock bit y (y= 0..15)

Bit 11 - Port x lock bit y (y= 0..15)

Bit 10 - Port x lock bit y (y= 0..15)

Bit 9 - Port x lock bit y (y= 0..15)

Bit 8 - Port x lock bit y (y= 0..15)

Bit 7 - Port x lock bit y (y= 0..15)

Bit 6 - Port x lock bit y (y= 0..15)

Bit 5 - Port x lock bit y (y= 0..15)

Bit 4 - Port x lock bit y (y= 0..15)

Bit 3 - Port x lock bit y (y= 0..15)

Bit 2 - Port x lock bit y (y= 0..15)

Bit 1 - Port x lock bit y (y= 0..15)

Bit 0 - Port x lock bit y (y= 0..15)

Get enumerated values variant

Checks if the value of the field is AF0

Checks if the value of the field is AF1

Checks if the value of the field is AF2

Checks if the value of the field is AF3

Checks if the value of the field is AF4

Checks if the value of the field is AF5

Checks if the value of the field is AF6

Checks if the value of the field is AF7

Checks if the value of the field is AF8

Checks if the value of the field is AF9

Checks if the value of the field is AF10

Checks if the value of the field is AF11

Checks if the value of the field is AF12

Checks if the value of the field is AF13

Checks if the value of the field is AF14

Checks if the value of the field is AF15

Bits 28:31 - Alternate function selection for port x bit y (y = 0..7)

Bits 24:27 - Alternate function selection for port x bit y (y = 0..7)

Bits 20:23 - Alternate function selection for port x bit y (y = 0..7)

Bits 16:19 - Alternate function selection for port x bit y (y = 0..7)

Bits 12:15 - Alternate function selection for port x bit y (y = 0..7)

Bits 8:11 - Alternate function selection for port x bit y (y = 0..7)

Bits 4:7 - Alternate function selection for port x bit y (y = 0..7)

Bits 0:3 - Alternate function selection for port x bit y (y = 0..7)

Get enumerated values variant

Checks if the value of the field is AF0

Checks if the value of the field is AF1

Checks if the value of the field is AF2

Checks if the value of the field is AF3

Checks if the value of the field is AF4

Checks if the value of the field is AF5

Checks if the value of the field is AF6

Checks if the value of the field is AF7

Checks if the value of the field is AF8

Checks if the value of the field is AF9

Checks if the value of the field is AF10

Checks if the value of the field is AF11

Checks if the value of the field is AF12

Checks if the value of the field is AF13

Checks if the value of the field is AF14

Checks if the value of the field is AF15

Bits 28:31 - Alternate function selection for port x bit y (y = 8..15)

Bits 24:27 - Alternate function selection for port x bit y (y = 8..15)

Bits 20:23 - Alternate function selection for port x bit y (y = 8..15)

Bits 16:19 - Alternate function selection for port x bit y (y = 8..15)

Bits 12:15 - Alternate function selection for port x bit y (y = 8..15)

Bits 8:11 - Alternate function selection for port x bit y (y = 8..15)

Bits 4:7 - Alternate function selection for port x bit y (y = 8..15)

Bits 0:3 - Alternate function selection for port x bit y (y = 8..15)

Get enumerated values variant

Checks if the value of the field is MASTERCLOCK

Checks if the value of the field is NODIV

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ONSTART

Checks if the value of the field is IMMEDIATELY

Get enumerated values variant

Checks if the value of the field is STEREO

Checks if the value of the field is MONO

Get enumerated values variant

Checks if the value of the field is ASYNCHRONOUS

Checks if the value of the field is INTERNAL

Checks if the value of the field is EXTERNAL

Get enumerated values variant

Checks if the value of the field is FALLINGEDGE

Checks if the value of the field is RISINGEDGE

Get enumerated values variant

Checks if the value of the field is MSBFIRST

Checks if the value of the field is LSBFIRST

Get enumerated values variant

Checks if the value of the field is BIT8

Checks if the value of the field is BIT10

Checks if the value of the field is BIT16

Checks if the value of the field is BIT20

Checks if the value of the field is BIT24

Checks if the value of the field is BIT32

Get enumerated values variant

Checks if the value of the field is FREE

Checks if the value of the field is SPDIF

Checks if the value of the field is AC97

Get enumerated values variant

Checks if the value of the field is MASTERTX

Checks if the value of the field is MASTERRX

Checks if the value of the field is SLAVETX

Checks if the value of the field is SLAVERX

Bits 20:23 - Master clock divider

Bit 19 - No divider

Bit 17 - DMA enable

Bit 16 - Audio block A enable

Bit 13 - Output drive

Bit 12 - Mono mode

Bits 10:11 - Synchronization enable

Bit 9 - Clock strobing edge

Bit 8 - Least significant bit first

Bits 5:7 - Data size

Bits 2:3 - Protocol configuration

Bits 0:1 - Audio block mode

Get enumerated values variant

Checks if the value of the field is NOCOMPANDING

Checks if the value of the field is MULAW

Checks if the value of the field is ALAW

Get enumerated values variant

Checks if the value of the field is ONESCOMPLEMENT

Checks if the value of the field is TWOSCOMPLEMENT

Get enumerated values variant

Checks if the value of the field is SENDZERO

Checks if the value of the field is SENDLAST

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is NOFLUSH

Checks if the value of the field is FLUSH

Get enumerated values variant

Checks if the value of the field is EMPTY

Checks if the value of the field is QUARTER1

Checks if the value of the field is QUARTER2

Checks if the value of the field is QUARTER3

Checks if the value of the field is FULL

Bits 14:15 - Companding mode

Bit 13 - Complement bit

Bits 7:12 - Mute counter

Bit 6 - Mute value

Bit 5 - Mute

Bit 4 - Tristate management on data line

Bit 3 - FIFO flush

Bits 0:2 - FIFO threshold

Get enumerated values variant

Checks if the value of the field is ONFIRST

Checks if the value of the field is BEFOREFIRST

Get enumerated values variant

Checks if the value of the field is FALLINGEDGE

Checks if the value of the field is RISINGEDGE

Bit 18 - Frame synchronization offset

Bit 17 - Frame synchronization polarity

Bit 16 - Frame synchronization definition

Bits 8:14 - Frame synchronization active level length

Bits 0:7 - Frame length

Get enumerated values variant

Checks if the value of the field is INACTIVE

Checks if the value of the field is ACTIVE

Get enumerated values variant

Checks if the value of the field is DATASIZE

Checks if the value of the field is BIT16

Checks if the value of the field is BIT32

Bits 16:31 - Slot enable

Bits 8:11 - Number of slots in an audio frame

Bits 6:7 - Slot size

Bits 0:4 - First bit offset

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 6 - Late frame synchronization detection interrupt enable

Bit 5 - Anticipated frame synchronization detection interrupt enable

Bit 4 - Codec not ready interrupt enable

Bit 3 - FIFO request interrupt enable

Bit 2 - Wrong clock configuration interrupt enable

Bit 1 - Mute detection interrupt enable

Bit 0 - Overrun/underrun interrupt enable

Get enumerated values variant

Checks if the value of the field is EMPTY

Checks if the value of the field is QUARTER1

Checks if the value of the field is QUARTER2

Checks if the value of the field is QUARTER3

Checks if the value of the field is QUARTER4

Checks if the value of the field is FULL

Get enumerated values variant

Checks if the value of the field is NOERROR

Checks if the value of the field is NOSYNC

Get enumerated values variant

Checks if the value of the field is NOERROR

Checks if the value of the field is EARLYSYNC

Get enumerated values variant

Checks if the value of the field is READY

Checks if the value of the field is NOTREADY

Get enumerated values variant

Checks if the value of the field is NOREQUEST

Checks if the value of the field is REQUEST

Get enumerated values variant

Checks if the value of the field is CORRECT

Checks if the value of the field is WRONG

Get enumerated values variant

Checks if the value of the field is NOMUTE

Checks if the value of the field is MUTE

Get enumerated values variant

Checks if the value of the field is NOERROR

Checks if the value of the field is OVERRUN

Bits 16:18 - FIFO level threshold

Bit 6 - Late frame synchronization detection

Bit 5 - Anticipated frame synchronization detection

Bit 4 - Codec not ready

Bit 3 - FIFO request

Bit 2 - Wrong clock configuration flag. This bit is read only

Bit 1 - Mute detection

Bit 0 - Overrun / underrun

Get enumerated values variant

Checks if the value of the field is CLEAR

Get enumerated values variant

Checks if the value of the field is CLEAR

Get enumerated values variant

Checks if the value of the field is CLEAR

Get enumerated values variant

Checks if the value of the field is CLEAR

Get enumerated values variant

Checks if the value of the field is CLEAR

Get enumerated values variant

Checks if the value of the field is CLEAR

Bit 6 - Clear late frame synchronization detection flag

Bit 5 - Clear anticipated frame synchronization detection flag

Bit 4 - Clear codec not ready flag

Bit 2 - Clear wrong clock configuration flag

Bit 1 - Mute detection flag

Bit 0 - Clear overrun / underrun

Bits 0:31 - Data

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is EDGEALIGNED

Checks if the value of the field is CENTERALIGNED1

Checks if the value of the field is CENTERALIGNED2

Checks if the value of the field is CENTERALIGNED3

Get enumerated values variant

Checks if the value of the field is UP

Checks if the value of the field is DOWN

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ANYEVENT

Checks if the value of the field is COUNTERONLY

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bits 8:9 - Clock division

Bit 7 - Auto-reload preload enable

Bits 5:6 - Center-aligned mode selection

Bit 4 - Direction

Bit 3 - One-pulse mode

Bit 2 - Update request source

Bit 1 - Update disable

Bit 0 - Counter enable

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is XOR

Get enumerated values variant

Checks if the value of the field is RESET

Checks if the value of the field is ENABLE

Checks if the value of the field is UPDATE

Checks if the value of the field is COMPAREPULSE

Checks if the value of the field is COMPAREOC1

Checks if the value of the field is COMPAREOC2

Checks if the value of the field is COMPAREOC3

Checks if the value of the field is COMPAREOC4

Get enumerated values variant

Checks if the value of the field is ONCOMPARE

Checks if the value of the field is ONUPDATE

Bit 7 - TI1 selection

Bits 4:6 - Master mode selection

Bit 3 - Capture/compare DMA selection

Get enumerated values variant

Checks if the value of the field is NOTINVERTED

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Checks if the value of the field is DIV8

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is NOSYNC

Checks if the value of the field is SYNC

Get enumerated values variant

Checks if the value of the field is ITR0

Checks if the value of the field is ITR1

Checks if the value of the field is ITR2

Checks if the value of the field is TI1F_ED

Checks if the value of the field is TI1FP1

Checks if the value of the field is TI2FP2

Checks if the value of the field is ETRF

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENCODER_MODE_1

Checks if the value of the field is ENCODER_MODE_2

Checks if the value of the field is ENCODER_MODE_3

Checks if the value of the field is RESET_MODE

Checks if the value of the field is GATED_MODE

Checks if the value of the field is TRIGGER_MODE

Checks if the value of the field is EXT_CLOCK_MODE

Bit 15 - External trigger polarity

Bit 14 - External clock enable

Bits 12:13 - External trigger prescaler

Bits 8:11 - External trigger filter

Bit 7 - Master/Slave mode

Bits 4:6 - Trigger selection

Bits 0:2 - Slave mode selection

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Trigger DMA request enable

Bit 13 - COM DMA request enable

Bit 12 - Capture/Compare 4 DMA request enable

Bit 11 - Capture/Compare 3 DMA request enable

Bit 10 - Capture/Compare 2 DMA request enable

Bit 9 - Capture/Compare 1 DMA request enable

Bit 8 - Update DMA request enable

Bit 6 - Trigger interrupt enable

Bit 4 - Capture/Compare 4 interrupt enable

Bit 3 - Capture/Compare 3 interrupt enable

Bit 2 - Capture/Compare 2 interrupt enable

Bit 1 - Capture/Compare 1 interrupt enable

Bit 0 - Update interrupt enable

Get enumerated values variant

Checks if the value of the field is OVERCAPTURE

Get enumerated values variant

Checks if the value of the field is NOTRIGGER

Checks if the value of the field is TRIGGER

Get enumerated values variant

[src]
pub fn is_match_(&self) -> bool

Checks if the value of the field is MATCH

Get enumerated values variant

Checks if the value of the field is CLEAR

Checks if the value of the field is UPDATEPENDING

Bit 12 - Capture/Compare 4 overcapture flag

Bit 11 - Capture/Compare 3 overcapture flag

Bit 10 - Capture/compare 2 overcapture flag

Bit 9 - Capture/Compare 1 overcapture flag

Bit 6 - Trigger interrupt flag

Bit 4 - Capture/Compare 4 interrupt flag

Bit 3 - Capture/Compare 3 interrupt flag

Bit 2 - Capture/Compare 2 interrupt flag

Bit 1 - Capture/compare 1 interrupt flag

Bit 0 - Update interrupt flag

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output compare 2 clear enable

Bits 12:14 - Output compare 2 mode

Bit 11 - Output compare 2 preload enable

Bit 10 - Output compare 2 fast enable

Bits 8:9 - Capture/Compare 2 selection

Bit 7 - Output compare 1 clear enable

Bits 4:6 - Output compare 1 mode

Bit 3 - Output compare 1 preload enable

Bit 2 - Output compare 1 fast enable

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is TI2

Checks if the value of the field is TI1

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is TI1

Checks if the value of the field is TI2

Checks if the value of the field is TRC

Bits 12:15 - Input capture 2 filter

Bits 10:11 - Input capture 2 prescaler

Bits 8:9 - Capture/compare 2 selection

Bits 4:7 - Input capture 1 filter

Bits 2:3 - Input capture 1 prescaler

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output compare 4 clear enable

Bits 12:14 - Output compare 4 mode

Bit 11 - Output compare 4 preload enable

Bit 10 - Output compare 4 fast enable

Bits 8:9 - Capture/Compare 4 selection

Bit 7 - Output compare 3 clear enable

Bits 4:6 - Output compare 3 mode

Bit 3 - Output compare 3 preload enable

Bit 2 - Output compare 3 fast enable

Bits 0:1 - Capture/Compare 3 selection

Get enumerated values variant

Checks if the value of the field is TI4

Checks if the value of the field is TI3

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is TI3

Checks if the value of the field is TI4

Checks if the value of the field is TRC

Bits 12:15 - Input capture 4 filter

Bits 10:11 - Input capture 4 prescaler

Bits 8:9 - Capture/Compare 4 selection

Bits 4:7 - Input capture 3 filter

Bits 2:3 - Input capture 3 prescaler

Bits 0:1 - Capture/Compare 3 selection

Bit 15 - Capture/Compare 4 output Polarity

Bit 13 - Capture/Compare 3 output Polarity

Bit 12 - Capture/Compare 4 output enable

Bit 11 - Capture/Compare 3 output Polarity

Bit 9 - Capture/Compare 3 output Polarity

Bit 8 - Capture/Compare 3 output enable

Bit 7 - Capture/Compare 2 output Polarity

Bit 5 - Capture/Compare 2 output Polarity

Bit 4 - Capture/Compare 2 output enable

Bit 3 - Capture/Compare 1 output Polarity

Bit 1 - Capture/Compare 1 output Polarity

Bit 0 - Capture/Compare 1 output enable

Bits 0:31 - Counter value

Bits 0:15 - Prescaler value

Bits 0:31 - Auto-reload value

Bits 0:31 - Capture/Compare 1 value

Bits 8:12 - DMA burst length

Bits 0:4 - DMA base address

Bits 0:15 - DMA register for burst accesses

Bits 0:2 - Timer2 ETR remap

Bits 3:4 - Internal trigger

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is ANYEVENT

Checks if the value of the field is COUNTERONLY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Bit 0 - Counter enable

Bit 1 - Update disable

Bit 2 - Update request source

Bit 3 - One-pulse mode

Bit 7 - Auto-reload preload enable

Bits 8:9 - Clock division

Bit 11 - UIF status bit remapping

Bit 9 - Output Idle state 1

Bit 8 - Output Idle state 1

Bit 3 - Capture/compare DMA selection

Bit 2 - Capture/compare control update selection

Bit 0 - Capture/compare preloaded control

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Trigger DMA request enable

Bit 13 - COM DMA request enable

Bit 9 - Capture/Compare 1 DMA request enable

Bit 8 - Update DMA request enable

Bit 7 - Break interrupt enable

Bit 6 - Trigger interrupt enable

Bit 5 - COM interrupt enable

Bit 1 - Capture/Compare 1 interrupt enable

Bit 0 - Update interrupt enable

Get enumerated values variant

Checks if the value of the field is CLEAR

Checks if the value of the field is UPDATEPENDING

Bit 9 - Capture/Compare 1 overcapture flag

Bit 7 - Break interrupt flag

Bit 6 - Trigger interrupt flag

Bit 5 - COM interrupt flag

Bit 1 - Capture/compare 1 interrupt flag

Bit 0 - Update interrupt flag

Bit 16 - Output Compare 1 mode

Bits 4:6 - Output Compare 1 mode

Bit 3 - Output Compare 1 preload enable

Bit 2 - Output Compare 1 fast enable

Bits 0:1 - Capture/Compare 1 selection

Bits 4:7 - Input capture 1 filter

Bits 2:3 - Input capture 1 prescaler

Bits 0:1 - Capture/Compare 1 selection

Bit 3 - Capture/Compare 1 output Polarity

Bit 2 - Capture/Compare 1 complementary output enable

Bit 1 - Capture/Compare 1 output Polarity

Bit 0 - Capture/Compare 1 output enable

Bits 0:15 - counter value

Bit 31 - UIF Copy

Bits 0:15 - Prescaler value

Bits 0:15 - Auto-reload value

Bits 0:7 - Repetition counter value

Bits 0:15 - Capture/Compare 1 value

Bits 0:7 - Dead-time generator setup

Bits 8:9 - Lock configuration

Bit 10 - Off-state selection for Idle mode

Bit 11 - Off-state selection for Run mode

Bit 12 - Break enable

Bit 13 - Break polarity

Bit 14 - Automatic output enable

Bit 15 - Main output enable

Bits 16:19 - Break filter

Bits 8:12 - DMA burst length

Bits 0:4 - DMA base address

Bits 0:15 - DMA register for burst accesses

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is ANYEVENT

Checks if the value of the field is COUNTERONLY

Get enumerated values variant

Checks if the value of the field is NOTSTOPPED

Checks if the value of the field is STOPPED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Bit 0 - Counter enable

Bit 1 - Update disable

Bit 2 - Update request source

Bit 3 - One-pulse mode

Bit 7 - Auto-reload preload enable

Bits 8:9 - Clock division

Bit 11 - UIF status bit remapping

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is HIGH

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is HIGH

Get enumerated values variant

Checks if the value of the field is ONCOMPARE

Checks if the value of the field is ONUPDATE

Get enumerated values variant

Checks if the value of the field is DEFAULT

Checks if the value of the field is WITHRISINGEDGE

Get enumerated values variant

Checks if the value of the field is NOTPRELOADED

Checks if the value of the field is PRELOADED

Bit 9 - Output Idle state 1

Bit 8 - Output Idle state 1

Bit 3 - Capture/compare DMA selection

Bit 2 - Capture/compare control update selection

Bit 0 - Capture/compare preloaded control

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Trigger DMA request enable

Bit 13 - COM DMA request enable

Bit 9 - Capture/Compare 1 DMA request enable

Bit 8 - Update DMA request enable

Bit 7 - Break interrupt enable

Bit 6 - Trigger interrupt enable

Bit 5 - COM interrupt enable

Bit 1 - Capture/Compare 1 interrupt enable

Bit 0 - Update interrupt enable

Get enumerated values variant

Checks if the value of the field is CLEAR

Checks if the value of the field is UPDATEPENDING

Bit 9 - Capture/Compare 1 overcapture flag

Bit 7 - Break interrupt flag

Bit 6 - Trigger interrupt flag

Bit 5 - COM interrupt flag

Bit 1 - Capture/compare 1 interrupt flag

Bit 0 - Update interrupt flag

Bit 16 - Output Compare 1 mode

Bits 4:6 - Output Compare 1 mode

Bit 3 - Output Compare 1 preload enable

Bit 2 - Output Compare 1 fast enable

Bits 0:1 - Capture/Compare 1 selection

Bits 4:7 - Input capture 1 filter

Bits 2:3 - Input capture 1 prescaler

Bits 0:1 - Capture/Compare 1 selection

Bit 3 - Capture/Compare 1 output Polarity

Bit 2 - Capture/Compare 1 complementary output enable

Bit 1 - Capture/Compare 1 output Polarity

Bit 0 - Capture/Compare 1 output enable

Bits 0:15 - counter value

Bit 31 - UIF Copy

Bits 0:15 - Prescaler value

Bits 0:15 - Auto-reload value

Bits 0:7 - Repetition counter value

Bits 0:15 - Capture/Compare 1 value

Bits 0:7 - Dead-time generator setup

Bits 8:9 - Lock configuration

Bit 10 - Off-state selection for Idle mode

Bit 11 - Off-state selection for Run mode

Bit 12 - Break enable

Bit 13 - Break polarity

Bit 14 - Automatic output enable

Bit 15 - Main output enable

Bits 16:19 - Break filter

Bits 8:12 - DMA burst length

Bits 0:4 - DMA base address

Bits 0:15 - DMA register for burst accesses

Bits 0:1 - Input capture 1 remap

Bit 0 - BRK BKIN input enable

Bit 1 - BRK COMP1 enable

Bit 2 - BRK COMP2 enable

Bit 8 - BRK DFSDM_BREAK1 enable

Bit 9 - BRK BKIN input polarity

Bit 10 - BRK COMP1 input polarity

Bit 11 - BRK COMP2 input polarit

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is EDGEALIGNED

Checks if the value of the field is CENTERALIGNED1

Checks if the value of the field is CENTERALIGNED2

Checks if the value of the field is CENTERALIGNED3

Get enumerated values variant

Checks if the value of the field is UP

Checks if the value of the field is DOWN

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ANYEVENT

Checks if the value of the field is COUNTERONLY

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bits 8:9 - Clock division

Bit 7 - Auto-reload preload enable

Bits 5:6 - Center-aligned mode selection

Bit 4 - Direction

Bit 3 - One-pulse mode

Bit 2 - Update request source

Bit 1 - Update disable

Bit 0 - Counter enable

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is XOR

Get enumerated values variant

Checks if the value of the field is RESET

Checks if the value of the field is ENABLE

Checks if the value of the field is UPDATE

Checks if the value of the field is COMPAREPULSE

Checks if the value of the field is COMPAREOC1

Checks if the value of the field is COMPAREOC2

Checks if the value of the field is COMPAREOC3

Checks if the value of the field is COMPAREOC4

Get enumerated values variant

Checks if the value of the field is ONCOMPARE

Checks if the value of the field is ONUPDATE

Bit 14 - Output Idle state 4

Bit 13 - Output Idle state 3

Bit 12 - Output Idle state 3

Bit 11 - Output Idle state 2

Bit 10 - Output Idle state 2

Bit 9 - Output Idle state 1

Bit 8 - Output Idle state 1

Bit 7 - TI1 selection

Bits 4:6 - Master mode selection

Bit 3 - Capture/compare DMA selection

Bit 2 - Capture/compare control update selection

Bit 0 - Capture/compare preloaded control

Get enumerated values variant

Checks if the value of the field is NOTINVERTED

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Checks if the value of the field is DIV8

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is NOSYNC

Checks if the value of the field is SYNC

Get enumerated values variant

Checks if the value of the field is ITR0

Checks if the value of the field is ITR1

Checks if the value of the field is ITR2

Checks if the value of the field is TI1F_ED

Checks if the value of the field is TI1FP1

Checks if the value of the field is TI2FP2

Checks if the value of the field is ETRF

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENCODER_MODE_1

Checks if the value of the field is ENCODER_MODE_2

Checks if the value of the field is ENCODER_MODE_3

Checks if the value of the field is RESET_MODE

Checks if the value of the field is GATED_MODE

Checks if the value of the field is TRIGGER_MODE

Checks if the value of the field is EXT_CLOCK_MODE

Bit 15 - External trigger polarity

Bit 14 - External clock enable

Bits 12:13 - External trigger prescaler

Bits 8:11 - External trigger filter

Bit 7 - Master/Slave mode

Bits 4:6 - Trigger selection

Bits 0:2 - Slave mode selection

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Trigger DMA request enable

Bit 13 - COM DMA request enable

Bit 12 - Capture/Compare 4 DMA request enable

Bit 11 - Capture/Compare 3 DMA request enable

Bit 10 - Capture/Compare 2 DMA request enable

Bit 9 - Capture/Compare 1 DMA request enable

Bit 8 - Update DMA request enable

Bit 6 - Trigger interrupt enable

Bit 4 - Capture/Compare 4 interrupt enable

Bit 3 - Capture/Compare 3 interrupt enable

Bit 2 - Capture/Compare 2 interrupt enable

Bit 1 - Capture/Compare 1 interrupt enable

Bit 0 - Update interrupt enable

Bit 7 - Break interrupt enable

Bit 5 - COM interrupt enable

Get enumerated values variant

Checks if the value of the field is OVERCAPTURE

Get enumerated values variant

Checks if the value of the field is NOTRIGGER

Checks if the value of the field is TRIGGER

Get enumerated values variant

[src]
pub fn is_match_(&self) -> bool

Checks if the value of the field is MATCH

Get enumerated values variant

Checks if the value of the field is CLEAR

Checks if the value of the field is UPDATEPENDING

Bit 12 - Capture/Compare 4 overcapture flag

Bit 11 - Capture/Compare 3 overcapture flag

Bit 10 - Capture/compare 2 overcapture flag

Bit 9 - Capture/Compare 1 overcapture flag

Bit 7 - Break interrupt flag

Bit 6 - Trigger interrupt flag

Bit 5 - COM interrupt flag

Bit 4 - Capture/Compare 4 interrupt flag

Bit 3 - Capture/Compare 3 interrupt flag

Bit 2 - Capture/Compare 2 interrupt flag

Bit 1 - Capture/compare 1 interrupt flag

Bit 0 - Update interrupt flag

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output Compare 2 clear enable

Bits 12:14 - Output Compare 2 mode

Bit 11 - Output Compare 2 preload enable

Bit 10 - Output Compare 2 fast enable

Bits 8:9 - Capture/Compare 2 selection

Bit 7 - Output Compare 1 clear enable

Bits 4:6 - Output Compare 1 mode

Bit 3 - Output Compare 1 preload enable

Bit 2 - Output Compare 1 fast enable

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is TI2

Checks if the value of the field is TI1

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is TI1

Checks if the value of the field is TI2

Checks if the value of the field is TRC

Bits 12:15 - Input capture 2 filter

Bits 10:11 - Input capture 2 prescaler

Bits 8:9 - Capture/Compare 2 selection

Bits 4:7 - Input capture 1 filter

Bits 2:3 - Input capture 1 prescaler

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output compare 4 clear enable

Bits 12:14 - Output compare 4 mode

Bit 11 - Output compare 4 preload enable

Bit 10 - Output compare 4 fast enable

Bits 8:9 - Capture/Compare 4 selection

Bit 7 - Output compare 3 clear enable

Bits 4:6 - Output compare 3 mode

Bit 3 - Output compare 3 preload enable

Bit 2 - Output compare 3 fast enable

Bits 0:1 - Capture/Compare 3 selection

Get enumerated values variant

Checks if the value of the field is TI4

Checks if the value of the field is TI3

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is TI3

Checks if the value of the field is TI4

Checks if the value of the field is TRC

Bits 12:15 - Input capture 4 filter

Bits 10:11 - Input capture 4 prescaler

Bits 8:9 - Capture/Compare 4 selection

Bits 4:7 - Input capture 3 filter

Bits 2:3 - Input capture 3 prescaler

Bits 0:1 - Capture/compare 3 selection

Bit 13 - Capture/Compare 3 output Polarity

Bit 12 - Capture/Compare 4 output enable

Bit 11 - Capture/Compare 3 output Polarity

Bit 10 - Capture/Compare 3 complementary output enable

Bit 9 - Capture/Compare 3 output Polarity

Bit 8 - Capture/Compare 3 output enable

Bit 7 - Capture/Compare 2 output Polarity

Bit 6 - Capture/Compare 2 complementary output enable

Bit 5 - Capture/Compare 2 output Polarity

Bit 4 - Capture/Compare 2 output enable

Bit 3 - Capture/Compare 1 output Polarity

Bit 2 - Capture/Compare 1 complementary output enable

Bit 1 - Capture/Compare 1 output Polarity

Bit 0 - Capture/Compare 1 output enable

Bits 0:15 - counter value

Bits 0:15 - Prescaler value

Bits 0:15 - Auto-reload value

Bits 0:7 - Repetition counter value

Bits 0:15 - Capture/Compare 1 value

Get enumerated values variant

Checks if the value of the field is DISABLEDIDLE

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is IDLELEVEL

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is IDLELEVEL

Bit 15 - Main output enable

Bit 14 - Automatic output enable

Bit 13 - Break polarity

Bit 12 - Break enable

Bit 11 - Off-state selection for Run mode

Bit 10 - Off-state selection for Idle mode

Bits 8:9 - Lock configuration

Bits 0:7 - Dead-time generator setup

Bits 8:12 - DMA burst length

Bits 0:4 - DMA base address

Bits 0:15 - DMA register for burst accesses

Bits 0:1 - External trigger remap on ADC1 analog watchdog

Bits 2:3 - External trigger remap on ADC3 analog watchdog

Bit 4 - Input Capture 1 remap

Bit 24 - Output Compare 6 mode bit 3

Bits 16:18 - Output Compare 5 mode bit 3

Bit 15 - Output compare 6 clear enable

Bits 12:14 - Output compare 6 mode

Bit 11 - Output compare 6 preload enable

Bit 10 - Output compare 6 fast enable

Bit 7 - Output compare 5 clear enable

Bits 4:6 - Output compare 5 mode

Bit 3 - Output compare 5 preload enable

Bit 2 - Output compare 5 fast enable

Bits 0:15 - Capture/Compare value

Bit 29 - Group Channel 5 and Channel 1

Bit 30 - Group Channel 5 and Channel 2

Bit 31 - Group Channel 5 and Channel 3

Bits 0:15 - Capture/Compare value

Bit 0 - BRK BKIN input enable

Bit 1 - BRK COMP1 enable

Bit 2 - BRK COMP2 enable

Bit 8 - BRK DFSDM_BREAK0 enable

Bit 9 - BRK BKIN input polarity

Bit 10 - BRK COMP1 input polarity

Bit 11 - BRK COMP2 input polarity

Bits 14:16 - ETR source selection

Bit 0 - BRK2 BKIN input enable

Bit 1 - BRK2 COMP1 enable

Bit 2 - BRK2 COMP2 enable

Bit 8 - BRK2 DFSDM_BREAK0 enable

Bit 9 - BRK2 BKIN input polarity

Bit 10 - BRK2 COMP1 input polarity

Bit 11 - BRK2 COMP2 input polarity

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ANYEVENT

Checks if the value of the field is COUNTERONLY

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 7 - Auto-reload preload enable

Bit 3 - One-pulse mode

Bit 2 - Update request source

Bit 1 - Update disable

Bit 0 - Counter enable

Get enumerated values variant

Checks if the value of the field is RESET

Checks if the value of the field is ENABLE

Checks if the value of the field is UPDATE

Bits 4:6 - Master mode selection

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 8 - Update DMA request enable

Bit 0 - Update interrupt enable

Get enumerated values variant

Checks if the value of the field is CLEAR

Checks if the value of the field is UPDATEPENDING

Bit 0 - Update interrupt flag

Bits 0:15 - Low counter value

Bits 0:15 - Prescaler value

Bits 0:15 - Low Auto-reload value

Bit 6 - Counter direction change up to down

Bit 5 - Counter direction change down to up

Bit 4 - Autoreload register update OK

Bit 3 - Compare register update OK

Bit 2 - External trigger edge event

Bit 1 - Autoreload match

Bit 0 - Compare match

Bit 6 - Direction change to down Interrupt Enable

Bit 5 - Direction change to UP Interrupt Enable

Bit 4 - Autoreload register update OK Interrupt Enable

Bit 3 - Compare register update OK Interrupt Enable

Bit 2 - External trigger valid edge Interrupt Enable

Bit 1 - Autoreload match Interrupt Enable

Bit 0 - Compare match Interrupt Enable

Bit 24 - Encoder mode enable

Bit 23 - counter mode enabled

Bit 22 - Registers update mode

Bit 21 - Waveform shape polarity

Bit 20 - Waveform shape

Bit 19 - Timeout enable

Bits 17:18 - Trigger enable and polarity

Bits 13:15 - Trigger selector

Bits 9:11 - Clock prescaler

Bits 6:7 - Configurable digital filter for trigger

Bits 3:4 - Configurable digital filter for external clock

Bits 1:2 - Clock Polarity

Bit 0 - Clock selector

Bit 2 - Timer start in continuous mode

Bit 1 - LPTIM start in single mode

Bit 0 - LPTIM Enable

Bits 0:15 - Compare value

Bits 0:15 - Auto reload value

Bits 0:15 - Counter value

Get enumerated values variant

Checks if the value of the field is M0

Checks if the value of the field is BIT7

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OVERSAMPLING16

Checks if the value of the field is OVERSAMPLING8

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is BIT8

Checks if the value of the field is BIT9

Get enumerated values variant

Checks if the value of the field is IDLE

Checks if the value of the field is ADDRESS

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is EVEN

Checks if the value of the field is ODD

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 28 - Word length

Bit 27 - End of Block interrupt enable

Bit 26 - Receiver timeout interrupt enable

Bit 15 - Oversampling mode

Bit 14 - Character match interrupt enable

Bit 13 - Mute mode enable

Bit 12 - Word length

Bit 11 - Receiver wakeup method

Bit 10 - Parity control enable

Bit 9 - Parity selection

Bit 8 - PE interrupt enable

Bit 7 - interrupt enable

Bit 6 - Transmission complete interrupt enable

Bit 5 - RXNE interrupt enable

Bit 4 - IDLE interrupt enable

Bit 3 - Transmitter enable

Bit 2 - Receiver enable

Bit 1 - USART enable in Stop mode

Bit 0 - USART enable

Bits 16:20 - Driver Enable de-assertion time

Bits 21:25 - Driver Enable assertion time

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LSB

Checks if the value of the field is MSB

Get enumerated values variant

Checks if the value of the field is POSITIVE

Checks if the value of the field is NEGATIVE

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is SWAPPED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is STOP1

Checks if the value of the field is STOP0P5

Checks if the value of the field is STOP2

Checks if the value of the field is STOP1P5

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is LOW

Checks if the value of the field is HIGH

Get enumerated values variant

Checks if the value of the field is FIRST

Checks if the value of the field is SECOND

Get enumerated values variant

Checks if the value of the field is NOTOUTPUT

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is BIT10

Checks if the value of the field is BIT11

Get enumerated values variant

Checks if the value of the field is BIT4

Checks if the value of the field is BIT7

Get enumerated values variant

Checks if the value of the field is START

Checks if the value of the field is EDGE

Checks if the value of the field is FRAME7F

Checks if the value of the field is FRAME55

Bit 23 - Receiver timeout enable

Bit 20 - Auto baud rate enable

Bit 19 - Most significant bit first

Bit 18 - Binary data inversion

Bit 17 - TX pin active level inversion

Bit 16 - RX pin active level inversion

Bit 15 - Swap TX/RX pins

Bit 14 - LIN mode enable

Bits 12:13 - STOP bits

Bit 11 - Clock enable

Bit 10 - Clock polarity

Bit 9 - Clock phase

Bit 8 - Last bit clock pulse

Bit 6 - LIN break detection interrupt enable

Bit 5 - LIN break detection length

Bit 4 - 7-bit Address Detection/4-bit Address Detection

Bits 24:31 - Address of the USART node

Bits 21:22 - Auto baud rate mode

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ADDRESS

Checks if the value of the field is START

Checks if the value of the field is RXNE

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is NOTDISABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is SAMPLE3

Checks if the value of the field is SAMPLE1

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is NOTSELECTED

Checks if the value of the field is SELECTED

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is LOWPOWER

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 22 - Wakeup from Stop mode interrupt enable

Bits 20:21 - Wakeup from Stop mode interrupt flag selection

Bits 17:19 - Smartcard auto-retry count

Bit 15 - Driver enable polarity selection

Bit 14 - Driver enable mode

Bit 13 - DMA Disable on Reception Error

Bit 12 - Overrun Disable

Bit 11 - One sample bit method enable

Bit 10 - CTS interrupt enable

Bit 9 - CTS enable

Bit 8 - RTS enable

Bit 7 - DMA enable transmitter

Bit 6 - DMA enable receiver

Bit 5 - Smartcard mode enable

Bit 4 - Smartcard NACK enable

Bit 3 - Half-duplex selection

Bit 2 - Ir low-power

Bit 1 - Ir mode enable

Bit 0 - Error interrupt enable

Bits 0:15 - DIV_Mantissa

Bits 8:15 - Guard time value

Bits 0:7 - Prescaler value

Bits 24:31 - Block Length

Bits 0:23 - Receiver timeout value

Bit 22 - REACK

Bit 21 - TEACK

Bit 20 - WUF

Bit 19 - RWU

Bit 18 - SBKF

Bit 17 - CMF

Bit 16 - BUSY

Bit 15 - ABRF

Bit 14 - ABRE

Bit 12 - EOBF

Bit 11 - RTOF

Bit 10 - CTS

Bit 9 - CTSIF

Bit 8 - LBDF

Bit 7 - TXE

Bit 6 - TC

Bit 5 - RXNE

Bit 4 - IDLE

Bit 3 - ORE

Bit 2 - NF

Bit 1 - FE

Bit 0 - PE

Bits 0:8 - Receive data value

Bits 0:8 - Transmit data value

Get enumerated values variant

Checks if the value of the field is M0

Checks if the value of the field is BIT7

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is BIT8

Checks if the value of the field is BIT9

Get enumerated values variant

Checks if the value of the field is IDLE

Checks if the value of the field is ADDRESS

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is EVEN

Checks if the value of the field is ODD

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 28 - Word length

Bit 14 - Character match interrupt enable

Bit 13 - Mute mode enable

Bit 12 - Word length

Bit 11 - Receiver wakeup method

Bit 10 - Parity control enable

Bit 9 - Parity selection

Bit 8 - PE interrupt enable

Bit 7 - interrupt enable

Bit 6 - Transmission complete interrupt enable

Bit 5 - RXNE interrupt enable

Bit 4 - IDLE interrupt enable

Bit 3 - Transmitter enable

Bit 2 - Receiver enable

Bit 1 - USART enable in Stop mode

Bit 0 - USART enable

Bits 21:25 - Driver Enable assertion time

Bits 16:20 - Driver Enable de-assertion time

Get enumerated values variant

Checks if the value of the field is LSB

Checks if the value of the field is MSB

Get enumerated values variant

Checks if the value of the field is POSITIVE

Checks if the value of the field is NEGATIVE

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is SWAPPED

Get enumerated values variant

Checks if the value of the field is STOP1

Checks if the value of the field is STOP0P5

Checks if the value of the field is STOP2

Checks if the value of the field is STOP1P5

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is BIT4

Checks if the value of the field is BIT7

Bit 19 - Most significant bit first

Bit 18 - Binary data inversion

Bit 17 - TX pin active level inversion

Bit 16 - RX pin active level inversion

Bit 15 - Swap TX/RX pins

Bits 12:13 - STOP bits

Bit 11 - Clock enable

Bit 4 - 7-bit Address Detection/4-bit Address Detection

Bits 24:31 - Address of the USART node

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ADDRESS

Checks if the value of the field is START

Checks if the value of the field is RXNE

Get enumerated values variant

Checks if the value of the field is HIGH

Checks if the value of the field is LOW

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is NOTDISABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is NOTSELECTED

Checks if the value of the field is SELECTED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 22 - Wakeup from Stop mode interrupt enable

Bits 20:21 - Wakeup from Stop mode interrupt flag selection

Bit 15 - Driver enable polarity selection

Bit 14 - Driver enable mode

Bit 13 - DMA Disable on Reception Error

Bit 12 - Overrun Disable

Bit 10 - CTS interrupt enable

Bit 9 - CTS enable

Bit 8 - RTS enable

Bit 7 - DMA enable transmitter

Bit 6 - DMA enable receiver

Bit 3 - Half-duplex selection

Bit 0 - Error interrupt enable

Bits 0:19 - BRR

Bit 22 - REACK

Bit 21 - TEACK

Bit 20 - WUF

Bit 19 - RWU

Bit 18 - SBKF

Bit 17 - CMF

Bit 16 - BUSY

Bit 10 - CTS

Bit 9 - CTSIF

Bit 7 - TXE

Bit 6 - TC

Bit 5 - RXNE

Bit 4 - IDLE

Bit 3 - ORE

Bit 2 - NF

Bit 1 - FE

Bit 0 - PE

Bits 0:8 - Receive data value

Bits 0:8 - Transmit data value

Get enumerated values variant

Checks if the value of the field is UNIDIRECTIONAL

Checks if the value of the field is BIDIRECTIONAL

Get enumerated values variant

Checks if the value of the field is OUTPUTDISABLED

Checks if the value of the field is OUTPUTENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is TXBUFFER

Checks if the value of the field is CRC

Get enumerated values variant

Checks if the value of the field is FULLDUPLEX

Checks if the value of the field is OUTPUTDISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is SLAVESELECTED

Checks if the value of the field is SLAVENOTSELECTED

Get enumerated values variant

Checks if the value of the field is MSBFIRST

Checks if the value of the field is LSBFIRST

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Checks if the value of the field is DIV8

Checks if the value of the field is DIV16

Checks if the value of the field is DIV32

Checks if the value of the field is DIV64

Checks if the value of the field is DIV128

Checks if the value of the field is DIV256

Get enumerated values variant

Checks if the value of the field is SLAVE

Checks if the value of the field is MASTER

Get enumerated values variant

Checks if the value of the field is IDLELOW

Checks if the value of the field is IDLEHIGH

Get enumerated values variant

Checks if the value of the field is FIRSTEDGE

Checks if the value of the field is SECONDEDGE

Bit 15 - Bidirectional data mode enable

Bit 14 - Output enable in bidirectional mode

Bit 13 - Hardware CRC calculation enable

Bit 12 - CRC transfer next

Bit 11 - CRC length

Bit 10 - Receive only

Bit 9 - Software slave management

Bit 8 - Internal slave select

Bit 7 - Frame format

Bit 6 - SPI enable

Bits 3:5 - Baud rate control

Bit 2 - Master selection

Bit 1 - Clock polarity

Bit 0 - Clock phase

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is MASKED

Checks if the value of the field is NOTMASKED

Get enumerated values variant

Checks if the value of the field is MASKED

Checks if the value of the field is NOTMASKED

Get enumerated values variant

Checks if the value of the field is MASKED

Checks if the value of the field is NOTMASKED

Bit 0 - Rx buffer DMA enable

Bit 1 - Tx buffer DMA enable

Bit 2 - SS output enable

Bit 3 - NSS pulse management

Bit 4 - Frame format

Bit 5 - Error interrupt enable

Bit 6 - RX buffer not empty interrupt enable

Bit 7 - Tx buffer empty interrupt enable

Bits 8:11 - Data size

Bit 12 - FIFO reception threshold

Bit 13 - Last DMA transfer for reception

Bit 14 - Last DMA transfer for transmission

Get enumerated values variant

Checks if the value of the field is EMPTY

Checks if the value of the field is NOTEMPTY

Get enumerated values variant

Checks if the value of the field is NOTEMPTY

Checks if the value of the field is EMPTY

Get enumerated values variant

[src]
pub fn is_match_(&self) -> bool

Checks if the value of the field is MATCH

Checks if the value of the field is NOMATCH

Get enumerated values variant

Checks if the value of the field is NOFAULT

Checks if the value of the field is FAULT

Get enumerated values variant

Checks if the value of the field is NOOVERRUN

Checks if the value of the field is OVERRUN

Get enumerated values variant

Checks if the value of the field is NOTBUSY

Checks if the value of the field is BUSY

Bit 0 - Receive buffer not empty

Bit 1 - Transmit buffer empty

Bit 4 - CRC error flag

Bit 5 - Mode fault

Bit 6 - Overrun flag

Bit 7 - Busy flag

Bit 8 - Frame format error

Bits 9:10 - FIFO reception level

Bits 11:12 - FIFO transmission level

Bits 0:15 - Data register

Bits 0:15 - CRC polynomial register

Bits 0:15 - Rx CRC register

Bits 0:15 - Tx CRC register

Bits 0:1 - PWRCTRL

Bit 14 - HW Flow Control enable

Bit 13 - SDIO_CK dephasing selection bit

Bits 11:12 - Wide bus mode enable bit

Bit 10 - Clock divider bypass enable bit

Bit 9 - Power saving configuration bit

Bit 8 - Clock enable bit

Bits 0:7 - Clock divide factor

Bits 0:31 - Command argument

Bit 14 - CE-ATA command

Bit 13 - not Interrupt Enable

Bit 12 - Enable CMD completion

Bit 11 - SD I/O suspend command

Bit 10 - Command path state machine (CPSM) Enable bit

Bit 9 - CPSM Waits for ends of data transfer (CmdPend internal signal)

Bit 8 - CPSM waits for interrupt request

Bits 6:7 - Wait for response bits

Bits 0:5 - Command index

Bits 0:5 - Response command index

Bits 0:31 - see Table 132

Bits 0:31 - see Table 132

Bits 0:31 - see Table 132

Bits 0:31 - see Table 132

Bits 0:31 - Data timeout period

Bits 0:24 - Data length value

Bit 11 - SD I/O enable functions

Bit 10 - Read wait mode

Bit 9 - Read wait stop

Bit 8 - Read wait start

Bits 4:7 - Data block size

Bit 3 - DMA enable bit

Bit 2 - Data transfer mode selection 1: Stream or SDIO multibyte data transfer

Bit 1 - Data transfer direction selection

Bit 0 - DTEN

Bits 0:24 - Data count value

Bit 23 - CE-ATA command completion signal received for CMD61

Bit 22 - SDIO interrupt received

Bit 21 - Data available in receive FIFO

Bit 20 - Data available in transmit FIFO

Bit 19 - Receive FIFO empty

Bit 18 - Transmit FIFO empty

Bit 17 - Receive FIFO full

Bit 16 - Transmit FIFO full

Bit 15 - Receive FIFO half full: there are at least 8 words in the FIFO

Bit 14 - Transmit FIFO half empty: at least 8 words can be written into the FIFO

Bit 13 - Data receive in progress

Bit 12 - Data transmit in progress

Bit 11 - Command transfer in progress

Bit 10 - Data block sent/received (CRC check passed)

Bit 9 - Start bit not detected on all data signals in wide bus mode

Bit 8 - Data end (data counter, SDIDCOUNT, is zero)

Bit 7 - Command sent (no response required)

Bit 6 - Command response received (CRC check passed)

Bit 5 - Received FIFO overrun error

Bit 4 - Transmit FIFO underrun error

Bit 3 - Data timeout

Bit 2 - Command response timeout

Bit 1 - Data block sent/received (CRC check failed)

Bit 0 - Command response received (CRC check failed)

Bit 23 - CEATAEND flag clear bit

Bit 22 - SDIOIT flag clear bit

Bit 10 - DBCKEND flag clear bit

Bit 9 - STBITERR flag clear bit

Bit 8 - DATAEND flag clear bit

Bit 7 - CMDSENT flag clear bit

Bit 6 - CMDREND flag clear bit

Bit 5 - RXOVERR flag clear bit

Bit 4 - TXUNDERR flag clear bit

Bit 3 - DTIMEOUT flag clear bit

Bit 2 - CTIMEOUT flag clear bit

Bit 1 - DCRCFAIL flag clear bit

Bit 0 - CCRCFAIL flag clear bit

Bit 23 - CE-ATA command completion signal received interrupt enable

Bit 22 - SDIO mode interrupt received interrupt enable

Bit 21 - Data available in Rx FIFO interrupt enable

Bit 20 - Data available in Tx FIFO interrupt enable

Bit 19 - Rx FIFO empty interrupt enable

Bit 18 - Tx FIFO empty interrupt enable

Bit 17 - Rx FIFO full interrupt enable

Bit 16 - Tx FIFO full interrupt enable

Bit 15 - Rx FIFO half full interrupt enable

Bit 14 - Tx FIFO half empty interrupt enable

Bit 13 - Data receive acting interrupt enable

Bit 12 - Data transmit acting interrupt enable

Bit 11 - Command acting interrupt enable

Bit 10 - Data block end interrupt enable

Bit 9 - Start bit error interrupt enable

Bit 8 - Data end interrupt enable

Bit 7 - Command sent interrupt enable

Bit 6 - Command response received interrupt enable

Bit 5 - Rx FIFO overrun error interrupt enable

Bit 4 - Tx FIFO underrun error interrupt enable

Bit 3 - Data timeout interrupt enable

Bit 2 - Command timeout interrupt enable

Bit 1 - Data CRC fail interrupt enable

Bit 0 - Command CRC fail interrupt enable

Bits 0:23 - Remaining number of words to be written to or read from the FIFO

Bits 0:31 - Receive and transmit FIFO data

Get enumerated values variant

Checks if the value of the field is MASKED

Checks if the value of the field is UNMASKED

Bit 0 - Interrupt Mask on line 0

Bit 1 - Interrupt Mask on line 1

Bit 2 - Interrupt Mask on line 2

Bit 3 - Interrupt Mask on line 3

Bit 4 - Interrupt Mask on line 4

Bit 5 - Interrupt Mask on line 5

Bit 6 - Interrupt Mask on line 6

Bit 7 - Interrupt Mask on line 7

Bit 8 - Interrupt Mask on line 8

Bit 9 - Interrupt Mask on line 9

Bit 10 - Interrupt Mask on line 10

Bit 11 - Interrupt Mask on line 11

Bit 12 - Interrupt Mask on line 12

Bit 13 - Interrupt Mask on line 13

Bit 14 - Interrupt Mask on line 14

Bit 15 - Interrupt Mask on line 15

Bit 16 - Interrupt Mask on line 16

Bit 17 - Interrupt Mask on line 17

Bit 18 - Interrupt Mask on line 18

Bit 19 - Interrupt Mask on line 19

Bit 20 - Interrupt Mask on line 20

Bit 21 - Interrupt Mask on line 21

Bit 22 - Interrupt Mask on line 22

Bit 23 - Interrupt Mask on line 23

Bit 24 - Interrupt Mask on line 24

Bit 25 - Interrupt Mask on line 25

Bit 26 - Interrupt Mask on line 26

Bit 27 - Interrupt Mask on line 27

Bit 28 - Interrupt Mask on line 28

Bit 29 - Interrupt Mask on line 29

Bit 30 - Interrupt Mask on line 30

Bit 31 - Interrupt Mask on line 31

Get enumerated values variant

Checks if the value of the field is MASKED

Checks if the value of the field is UNMASKED

Bit 0 - Event Mask on line 0

Bit 1 - Event Mask on line 1

Bit 2 - Event Mask on line 2

Bit 3 - Event Mask on line 3

Bit 4 - Event Mask on line 4

Bit 5 - Event Mask on line 5

Bit 6 - Event Mask on line 6

Bit 7 - Event Mask on line 7

Bit 8 - Event Mask on line 8

Bit 9 - Event Mask on line 9

Bit 10 - Event Mask on line 10

Bit 11 - Event Mask on line 11

Bit 12 - Event Mask on line 12

Bit 13 - Event Mask on line 13

Bit 14 - Event Mask on line 14

Bit 15 - Event Mask on line 15

Bit 16 - Event Mask on line 16

Bit 17 - Event Mask on line 17

Bit 18 - Event Mask on line 18

Bit 19 - Event Mask on line 19

Bit 20 - Event Mask on line 20

Bit 21 - Event Mask on line 21

Bit 22 - Event Mask on line 22

Bit 23 - Event Mask on line 23

Bit 24 - Event Mask on line 24

Bit 25 - Event Mask on line 25

Bit 26 - Event Mask on line 26

Bit 27 - Event Mask on line 27

Bit 28 - Event Mask on line 28

Bit 29 - Event Mask on line 29

Bit 30 - Event Mask on line 30

Bit 31 - Event Mask on line 31

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 0 - Rising trigger event configuration of line 0

Bit 1 - Rising trigger event configuration of line 1

Bit 2 - Rising trigger event configuration of line 2

Bit 3 - Rising trigger event configuration of line 3

Bit 4 - Rising trigger event configuration of line 4

Bit 5 - Rising trigger event configuration of line 5

Bit 6 - Rising trigger event configuration of line 6

Bit 7 - Rising trigger event configuration of line 7

Bit 8 - Rising trigger event configuration of line 8

Bit 9 - Rising trigger event configuration of line 9

Bit 10 - Rising trigger event configuration of line 10

Bit 11 - Rising trigger event configuration of line 11

Bit 12 - Rising trigger event configuration of line 12

Bit 13 - Rising trigger event configuration of line 13

Bit 14 - Rising trigger event configuration of line 14

Bit 15 - Rising trigger event configuration of line 15

Bit 16 - Rising trigger event configuration of line 16

Bit 18 - Rising trigger event configuration of line 18

Bit 19 - Rising trigger event configuration of line 19

Bit 20 - Rising trigger event configuration of line 20

Bit 21 - Rising trigger event configuration of line 21

Bit 22 - Rising trigger event configuration of line 22

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 0 - Falling trigger event configuration of line 0

Bit 1 - Falling trigger event configuration of line 1

Bit 2 - Falling trigger event configuration of line 2

Bit 3 - Falling trigger event configuration of line 3

Bit 4 - Falling trigger event configuration of line 4

Bit 5 - Falling trigger event configuration of line 5

Bit 6 - Falling trigger event configuration of line 6

Bit 7 - Falling trigger event configuration of line 7

Bit 8 - Falling trigger event configuration of line 8

Bit 9 - Falling trigger event configuration of line 9

Bit 10 - Falling trigger event configuration of line 10

Bit 11 - Falling trigger event configuration of line 11

Bit 12 - Falling trigger event configuration of line 12

Bit 13 - Falling trigger event configuration of line 13

Bit 14 - Falling trigger event configuration of line 14

Bit 15 - Falling trigger event configuration of line 15

Bit 16 - Falling trigger event configuration of line 16

Bit 18 - Falling trigger event configuration of line 18

Bit 19 - Falling trigger event configuration of line 19

Bit 20 - Falling trigger event configuration of line 20

Bit 21 - Falling trigger event configuration of line 21

Bit 22 - Falling trigger event configuration of line 22

Get enumerated values variant

Checks if the value of the field is PEND

Bit 0 - Software Interrupt on line 0

Bit 1 - Software Interrupt on line 1

Bit 2 - Software Interrupt on line 2

Bit 3 - Software Interrupt on line 3

Bit 4 - Software Interrupt on line 4

Bit 5 - Software Interrupt on line 5

Bit 6 - Software Interrupt on line 6

Bit 7 - Software Interrupt on line 7

Bit 8 - Software Interrupt on line 8

Bit 9 - Software Interrupt on line 9

Bit 10 - Software Interrupt on line 10

Bit 11 - Software Interrupt on line 11

Bit 12 - Software Interrupt on line 12

Bit 13 - Software Interrupt on line 13

Bit 14 - Software Interrupt on line 14

Bit 15 - Software Interrupt on line 15

Bit 16 - Software Interrupt on line 16

Bit 18 - Software Interrupt on line 18

Bit 19 - Software Interrupt on line 19

Bit 20 - Software Interrupt on line 20

Bit 21 - Software Interrupt on line 21

Bit 22 - Software Interrupt on line 22

Get enumerated values variant

Checks if the value of the field is NOTPENDING

Checks if the value of the field is PENDING

Bit 0 - Pending bit 0

Bit 1 - Pending bit 1

Bit 2 - Pending bit 2

Bit 3 - Pending bit 3

Bit 4 - Pending bit 4

Bit 5 - Pending bit 5

Bit 6 - Pending bit 6

Bit 7 - Pending bit 7

Bit 8 - Pending bit 8

Bit 9 - Pending bit 9

Bit 10 - Pending bit 10

Bit 11 - Pending bit 11

Bit 12 - Pending bit 12

Bit 13 - Pending bit 13

Bit 14 - Pending bit 14

Bit 15 - Pending bit 15

Bit 16 - Pending bit 16

Bit 18 - Pending bit 18

Bit 19 - Pending bit 19

Bit 20 - Pending bit 20

Bit 21 - Pending bit 21

Bit 22 - Pending bit 22

Get enumerated values variant

Checks if the value of the field is MASKED

Checks if the value of the field is UNMASKED

Bit 0 - Interrupt Mask on external/internal line 32

Bit 1 - Interrupt Mask on external/internal line 33

Bit 2 - Interrupt Mask on external/internal line 34

Bit 3 - Interrupt Mask on external/internal line 35

Bit 4 - Interrupt Mask on external/internal line 36

Bit 5 - Interrupt Mask on external/internal line 37

Bit 6 - Interrupt Mask on external/internal line 38

Bit 7 - Interrupt Mask on external/internal line 39

Get enumerated values variant

Checks if the value of the field is MASKED

Checks if the value of the field is UNMASKED

Bit 0 - Event mask on external/internal line 32

Bit 1 - Event mask on external/internal line 33

Bit 2 - Event mask on external/internal line 34

Bit 3 - Event mask on external/internal line 35

Bit 4 - Event mask on external/internal line 36

Bit 5 - Event mask on external/internal line 37

Bit 6 - Event mask on external/internal line 38

Bit 7 - Event mask on external/internal line 39

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 3 - Rising trigger event configuration bit of line 35

Bit 4 - Rising trigger event configuration bit of line 36

Bit 5 - Rising trigger event configuration bit of line 37

Bit 6 - Rising trigger event configuration bit of line 38

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 3 - Falling trigger event configuration bit of line 35

Bit 4 - Falling trigger event configuration bit of line 36

Bit 5 - Falling trigger event configuration bit of line 37

Bit 6 - Falling trigger event configuration bit of line 38

Get enumerated values variant

Checks if the value of the field is PEND

Bit 3 - Software interrupt on line 35

Bit 4 - Software interrupt on line 36

Bit 5 - Software interrupt on line 37

Bit 6 - Software interrupt on line 38

Get enumerated values variant

Checks if the value of the field is NOTPENDING

Checks if the value of the field is PENDING

Bit 3 - Pending interrupt flag on line 35

Bit 4 - Pending interrupt flag on line 36

Bit 5 - Pending interrupt flag on line 37

Bit 6 - Pending interrupt flag on line 38

Bit 0 - Voltage reference buffer enable

Bit 1 - High impedance mode

Bit 2 - Voltage reference scale

Bit 3 - Voltage reference buffer ready

Bits 0:5 - Trimming code

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is EXTENDED

Get enumerated values variant

Checks if the value of the field is DATA

Checks if the value of the field is REMOTE

Bits 21:31 - STID

Bits 3:20 - EXID

Bit 2 - IDE

Bit 1 - RTR

Bit 0 - TXRQ

Bits 16:31 - TIME

Bit 8 - TGT

Bits 0:3 - DLC

Bits 24:31 - DATA3

Bits 16:23 - DATA2

Bits 8:15 - DATA1

Bits 0:7 - DATA0

Bits 24:31 - DATA7

Bits 16:23 - DATA6

Bits 8:15 - DATA5

Bits 0:7 - DATA4

Get enumerated values variant

Checks if the value of the field is STANDARD

Checks if the value of the field is EXTENDED

Get enumerated values variant

Checks if the value of the field is DATA

Checks if the value of the field is REMOTE

Bits 21:31 - STID

Bits 3:20 - EXID

Bit 2 - IDE

Bit 1 - RTR

Bits 16:31 - TIME

Bits 8:15 - FMI

Bits 0:3 - DLC

Bits 24:31 - DATA3

Bits 16:23 - DATA2

Bits 8:15 - DATA1

Bits 0:7 - DATA0

Bits 24:31 - DATA7

Bits 16:23 - DATA6

Bits 8:15 - DATA5

Bits 0:7 - DATA4

Bits 0:31 - Filter bits

Bits 0:31 - Filter bits

Bit 16 - DBF

Bit 15 - RESET

Bit 7 - TTCM

Bit 6 - ABOM

Bit 5 - AWUM

Bit 4 - NART

Bit 3 - RFLM

Bit 2 - TXFP

Bit 1 - SLEEP

Bit 0 - INRQ

Bit 11 - RX

Bit 10 - SAMP

Bit 9 - RXM

Bit 8 - TXM

Bit 4 - SLAKI

Bit 3 - WKUI

Bit 2 - ERRI

Bit 1 - SLAK

Bit 0 - INAK

Bit 31 - Lowest priority flag for mailbox 2

Bit 30 - Lowest priority flag for mailbox 1

Bit 29 - Lowest priority flag for mailbox 0

Bit 28 - Lowest priority flag for mailbox 2

Bit 27 - Lowest priority flag for mailbox 1

Bit 26 - Lowest priority flag for mailbox 0

Bits 24:25 - CODE

Bit 23 - ABRQ2

Bit 19 - TERR2

Bit 18 - ALST2

Bit 17 - TXOK2

Bit 16 - RQCP2

Bit 15 - ABRQ1

Bit 11 - TERR1

Bit 10 - ALST1

Bit 9 - TXOK1

Bit 8 - RQCP1

Bit 7 - ABRQ0

Bit 3 - TERR0

Bit 2 - ALST0

Bit 1 - TXOK0

Bit 0 - RQCP0

Get enumerated values variant

Checks if the value of the field is RELEASE

Get enumerated values variant

Checks if the value of the field is NOOVERRUN

Checks if the value of the field is OVERRUN

Get enumerated values variant

Checks if the value of the field is NOTFULL

Checks if the value of the field is FULL

Bit 5 - RFOM0

Bit 4 - FOVR0

Bit 3 - FULL0

Bits 0:1 - FMP0

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 17 - SLKIE

Bit 16 - WKUIE

Bit 15 - ERRIE

Bit 11 - LECIE

Bit 10 - BOFIE

Bit 9 - EPVIE

Bit 8 - EWGIE

Bit 6 - FOVIE1

Bit 5 - FFIE1

Bit 4 - FMPIE1

Bit 3 - FOVIE0

Bit 2 - FFIE0

Bit 1 - FMPIE0

Bit 0 - TMEIE

Get enumerated values variant

Checks if the value of the field is NOERROR

Checks if the value of the field is STUFF

Checks if the value of the field is FORM

Checks if the value of the field is ACK

Checks if the value of the field is BITRECESSIVE

Checks if the value of the field is BITDOMINANT

Checks if the value of the field is CRC

Checks if the value of the field is CUSTOM

Bits 24:31 - REC

Bits 16:23 - TEC

Bits 4:6 - LEC

Bit 2 - BOFF

Bit 1 - EPVF

Bit 0 - EWGF

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is SILENT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 31 - SILM

Bit 30 - LBKM

Bits 24:25 - SJW

Bits 20:22 - TS2

Bits 16:19 - TS1

Bits 0:9 - BRP

Bit 22 - AM/PM notation

Bits 20:21 - Hour tens in BCD format

Bits 16:19 - Hour units in BCD format

Bits 12:14 - Minute tens in BCD format

Bits 8:11 - Minute units in BCD format

Bits 4:6 - Second tens in BCD format

Bits 0:3 - Second units in BCD format

Bits 20:23 - Year tens in BCD format

Bits 16:19 - Year units in BCD format

Bits 13:15 - Week day units

Bit 12 - Month tens in BCD format

Bits 8:11 - Month units in BCD format

Bits 4:5 - Date tens in BCD format

Bits 0:3 - Date units in BCD format

Bits 0:2 - Wakeup clock selection

Bit 3 - Time-stamp event active edge

Bit 4 - Reference clock detection enable (50 or 60 Hz)

Bit 5 - Bypass the shadow registers

Bit 6 - Hour format

Bit 8 - Alarm A enable

Bit 9 - Alarm B enable

Bit 10 - Wakeup timer enable

Bit 11 - Time stamp enable

Bit 12 - Alarm A interrupt enable

Bit 13 - Alarm B interrupt enable

Bit 14 - Wakeup timer interrupt enable

Bit 15 - Time-stamp interrupt enable

Bit 16 - Add 1 hour (summer time change)

Bit 17 - Subtract 1 hour (winter time change)

Bit 18 - Backup

Bit 19 - Calibration output selection

Bit 20 - Output polarity

Bits 21:22 - Output selection

Bit 23 - Calibration output enable

Bit 24 - timestamp on internal event enable

Bit 0 - Alarm A write flag

Bit 1 - Alarm B write flag

Bit 2 - Wakeup timer write flag

Bit 3 - Shift operation pending

Bit 4 - Initialization status flag

Bit 5 - Registers synchronization flag

Bit 6 - Initialization flag

Bit 7 - Initialization mode

Bit 8 - Alarm A flag

Bit 9 - Alarm B flag

Bit 10 - Wakeup timer flag

Bit 11 - Time-stamp flag

Bit 12 - Time-stamp overflow flag

Bit 13 - Tamper detection flag

Bit 14 - RTC_TAMP2 detection flag

Bit 15 - RTC_TAMP3 detection flag

Bit 16 - Recalibration pending Flag

Bits 16:22 - Asynchronous prescaler factor

Bits 0:14 - Synchronous prescaler factor

Bits 0:15 - Wakeup auto-reload value bits

Bit 31 - Alarm A date mask

Bit 30 - Week day selection

Bits 28:29 - Date tens in BCD format

Bits 24:27 - Date units or day in BCD format

Bit 23 - Alarm A hours mask

Bit 22 - AM/PM notation

Bits 20:21 - Hour tens in BCD format

Bits 16:19 - Hour units in BCD format

Bit 15 - Alarm A minutes mask

Bits 12:14 - Minute tens in BCD format

Bits 8:11 - Minute units in BCD format

Bit 7 - Alarm A seconds mask

Bits 4:6 - Second tens in BCD format

Bits 0:3 - Second units in BCD format

Bit 31 - Alarm B date mask

Bit 30 - Week day selection

Bits 28:29 - Date tens in BCD format

Bits 24:27 - Date units or day in BCD format

Bit 23 - Alarm B hours mask

Bit 22 - AM/PM notation

Bits 20:21 - Hour tens in BCD format

Bits 16:19 - Hour units in BCD format

Bit 15 - Alarm B minutes mask

Bits 12:14 - Minute tens in BCD format

Bits 8:11 - Minute units in BCD format

Bit 7 - Alarm B seconds mask

Bits 4:6 - Second tens in BCD format

Bits 0:3 - Second units in BCD format

Bits 0:15 - Sub second value

Bits 0:3 - Second units in BCD format

Bits 4:6 - Second tens in BCD format

Bits 8:11 - Minute units in BCD format

Bits 12:14 - Minute tens in BCD format

Bits 16:19 - Hour units in BCD format

Bits 20:21 - Hour tens in BCD format

Bit 22 - AM/PM notation

Bits 13:15 - Week day units

Bit 12 - Month tens in BCD format

Bits 8:11 - Month units in BCD format

Bits 4:5 - Date tens in BCD format

Bits 0:3 - Date units in BCD format

Bits 0:15 - Sub second value

Bit 15 - Increase frequency of RTC by 488.5 ppm

Bit 14 - Use an 8-second calibration cycle period

Bit 13 - Use a 16-second calibration cycle period

Bits 0:8 - Calibration minus

Bit 0 - Tamper 1 detection enable

Bit 1 - Active level for tamper 1

Bit 2 - Tamper interrupt enable

Bit 3 - Tamper 2 detection enable

Bit 4 - Active level for tamper 2

Bit 5 - Tamper 3 detection enable

Bit 6 - Active level for tamper 3

Bit 7 - Activate timestamp on tamper detection event

Bits 8:10 - Tamper sampling frequency

Bits 11:12 - Tamper filter count

Bits 13:14 - Tamper precharge duration

Bit 15 - TAMPER pull-up disable

Bit 16 - Tamper 1 interrupt enable

Bit 17 - Tamper 1 no erase

Bit 18 - Tamper 1 mask flag

Bit 19 - Tamper 2 interrupt enable

Bit 20 - Tamper 2 no erase

Bit 21 - Tamper 2 mask flag

Bit 22 - Tamper 3 interrupt enable

Bit 23 - Tamper 3 no erase

Bit 24 - Tamper 3 mask flag

Bits 24:27 - Mask the most-significant bits starting at this bit

Bits 0:14 - Sub seconds value

Bits 24:27 - Mask the most-significant bits starting at this bit

Bits 0:14 - Sub seconds value

Bit 0 - RTC_ALARM on PC13 output type

Bit 1 - RTC_OUT remap

Bits 0:31 - BKP

Bit 0 - Reception DMA enable

Bit 1 - Transmission DMA enable

Bit 2 - Reception buffering mode

Bit 3 - Transmission buffering mode

Bit 4 - Loopback mode enable

Bit 5 - Single wire protocol master interface enable

Bit 10 - Single wire protocol master interface deactivate

Bits 0:5 - Bitrate prescaler

Bit 0 - Receive buffer full flag

Bit 1 - Transmit buffer empty flag

Bit 2 - Receive CRC error flag

Bit 3 - Receive overrun error flag

Bit 4 - Transmit underrun error flag

Bit 5 - Receive data register not empty

Bit 6 - Transmit data register empty

Bit 7 - Transfer complete flag

Bit 8 - Slave resume flag

Bit 9 - SUSPEND flag

Bit 10 - DEACTIVATED flag

Bit 0 - Receive buffer full interrupt enable

Bit 1 - Transmit buffer empty interrupt enable

Bit 2 - Receive CRC error interrupt enable

Bit 3 - Receive overrun error interrupt enable

Bit 4 - Transmit underrun error interrupt enable

Bit 5 - Receive interrupt enable

Bit 6 - Transmit interrupt enable

Bit 7 - Transmit complete interrupt enable

Bit 8 - Slave resume interrupt enable

Bits 0:4 - Receive frame length

Bits 0:31 - received data

Bit 0 - SWP transceiver bypass

Bit 1 - SWP class selection

Bit 0 - Operational amplifier Enable

Bit 1 - Operational amplifier Low Power Mode

Bits 2:3 - Operational amplifier PGA mode

Bits 4:5 - Operational amplifier Programmable amplifier gain value

Bits 8:9 - Inverting input selection

Bit 10 - Non inverted input selection

Bit 12 - Calibration mode enabled

Bit 13 - Calibration selection

Bit 14 - allows to switch from AOP offset trimmed values to AOP offset

Bit 15 - Operational amplifier calibration output

Bit 31 - Operational amplifier power supply range for stability

Bits 0:4 - Trim for NMOS differential pairs

Bits 8:12 - Trim for PMOS differential pairs

Bits 0:4 - Trim for NMOS differential pairs

Bits 8:12 - Trim for PMOS differential pairs

Bit 0 - Operational amplifier Enable

Bit 1 - Operational amplifier Low Power Mode

Bits 2:3 - Operational amplifier PGA mode

Bits 4:5 - Operational amplifier Programmable amplifier gain value

Bits 8:9 - Inverting input selection

Bit 10 - Non inverted input selection

Bit 12 - Calibration mode enabled

Bit 13 - Calibration selection

Bit 14 - allows to switch from AOP offset trimmed values to AOP offset

Bit 15 - Operational amplifier calibration output

Bits 0:4 - Trim for NMOS differential pairs

Bits 8:12 - Trim for PMOS differential pairs

Bits 0:4 - Trim for NMOS differential pairs

Bits 8:12 - Trim for PMOS differential pairs

Bits 8:13 - HSI48 oscillator smooth trimming

Bit 7 - Generate software SYNC event

Bit 6 - Automatic trimming enable

Bit 5 - Frequency error counter enable

Bit 3 - Expected SYNC interrupt enable

Bit 2 - Synchronization or trimming error interrupt enable

Bit 1 - SYNC warning interrupt enable

Bit 0 - SYNC event OK interrupt enable

Bit 31 - SYNC polarity selection

Bits 28:29 - SYNC signal source selection

Bits 24:26 - SYNC divider

Bits 16:23 - Frequency error limit

Bits 0:15 - Counter reload value

Bits 16:31 - Frequency error capture

Bit 15 - Frequency error direction

Bit 10 - Trimming overflow or underflow

Bit 9 - SYNC missed

Bit 8 - SYNC error

Bit 3 - Expected SYNC flag

Bit 2 - Error flag

Bit 1 - SYNC warning flag

Bit 0 - SYNC event OK flag

Bit 3 - Expected SYNC clear flag

Bit 2 - Error clear flag

Bit 1 - SYNC warning clear flag

Bit 0 - SYNC event OK clear flag

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bits 0:3 - Endpoint address

Bits 4:5 - Status bits, for transmission transfers

Bit 6 - Data Toggle, for transmission transfers

Bit 7 - Correct Transfer for transmission

Bit 8 - Endpoint kind

Bits 9:10 - Endpoint type

Bit 11 - Setup transaction completed

Bits 12:13 - Status bits, for reception transfers

Bit 14 - Data Toggle, for reception transfers

Bit 15 - Correct transfer for reception

Bit 0 - Force USB Reset

Bit 1 - Power down

Bit 2 - Low-power mode

Bit 3 - Force suspend

Bit 4 - Resume request

Bit 5 - LPM L1 Resume request

Bit 7 - LPM L1 state request interrupt mask

Bit 8 - Expected start of frame interrupt mask

Bit 9 - Start of frame interrupt mask

Bit 10 - USB reset interrupt mask

Bit 11 - Suspend mode interrupt mask

Bit 12 - Wakeup interrupt mask

Bit 13 - Error interrupt mask

Bit 14 - Packet memory area over / underrun interrupt mask

Bit 15 - Correct transfer interrupt mask

Bits 0:3 - Endpoint Identifier

Bit 4 - Direction of transaction

Bit 7 - LPM L1 state request

Bit 8 - Expected start frame

Bit 9 - start of frame

Bit 10 - reset request

Bit 11 - Suspend mode request

Bit 12 - Wakeup

Bit 13 - Error

Bit 14 - Packet memory area over / underrun

Bit 15 - Correct transfer

[src]
pub fn fn_(&self) -> FN_R

Bits 0:10 - Frame number

Bits 11:12 - Lost SOF

Bit 13 - Locked

Bit 14 - Receive data - line status

Bit 15 - Receive data + line status

Bits 0:6 - Device address

Bit 7 - Enable function

Bits 3:15 - Buffer table

Bits 24:31 - Clock prescaler

Bit 23 - Polling match mode

Bit 22 - Automatic poll mode stop

Bit 20 - TimeOut interrupt enable

Bit 19 - Status match interrupt enable

Bit 18 - FIFO threshold interrupt enable

Bit 17 - Transfer complete interrupt enable

Bit 16 - Transfer error interrupt enable

Bits 8:12 - IFO threshold level

Bit 7 - FLASH memory selection

Bit 6 - Dual-flash mode

Bit 4 - Sample shift

Bit 3 - Timeout counter enable

Bit 2 - DMA enable

Bit 1 - Abort request

Bit 0 - Enable

Bits 16:20 - FLASH memory size

Bits 8:10 - Chip select high time

Bit 0 - Mode 0 / mode 3

Bits 8:14 - FIFO level

Bit 5 - Busy

Bit 4 - Timeout flag

Bit 3 - Status match flag

Bit 2 - FIFO threshold flag

Bit 1 - Transfer complete flag

Bit 0 - Transfer error flag

Bit 4 - Clear timeout flag

Bit 3 - Clear status match flag

Bit 1 - Clear transfer complete flag

Bit 0 - Clear transfer error flag

Bits 0:31 - Data length

Bit 31 - Double data rate mode

Bit 30 - DDR hold half cycle

Bit 28 - Send instruction only once mode

Bits 26:27 - Functional mode

Bits 24:25 - Data mode

Bits 18:22 - Number of dummy cycles

Bits 16:17 - Alternate bytes size

Bits 14:15 - Alternate bytes mode

Bits 12:13 - Address size

Bits 10:11 - Address mode

Bits 8:9 - Instruction mode

Bits 0:7 - Instruction

Bits 0:31 - Address

Bits 0:31 - ALTERNATE

Bits 0:31 - Data

Bits 0:31 - Status mask

[src]
pub fn match_(&self) -> MATCH_R

Bits 0:31 - Status match

Bits 0:15 - Polling interval

Bits 0:15 - Timeout period

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is SRAM

Checks if the value of the field is PSRAM

Checks if the value of the field is FLASH

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ACTIVELOW

Checks if the value of the field is ACTIVEHIGH

Get enumerated values variant

Checks if the value of the field is BEFOREWAITSTATE

Checks if the value of the field is DURINGWAITSTATE

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is NOBURSTSPLIT

Checks if the value of the field is BYTES128

Checks if the value of the field is BYTES256

Checks if the value of the field is BYTES512

Checks if the value of the field is BYTES1024

Bit 0 - MBKEN

Bit 1 - MUXEN

Bits 2:3 - MTYP

Bits 4:5 - MWID

Bit 6 - FACCEN

Bit 8 - BURSTEN

Bit 9 - WAITPOL

Bit 11 - WAITCFG

Bit 12 - WREN

Bit 13 - WAITEN

Bit 14 - EXTMOD

Bit 15 - ASYNCWAIT

Bit 19 - CBURSTRW

Bit 20 - CCLKEN

Bit 21 - Write FIFO Disable

Bit 10 - WRAPMOD

Bits 16:18 - CRAM page size

Get enumerated values variant

Checks if the value of the field is A

Checks if the value of the field is B

Checks if the value of the field is C

Checks if the value of the field is D

Bits 28:29 - ACCMOD

Bits 24:27 - DATLAT

Bits 20:23 - CLKDIV

Bits 16:19 - BUSTURN

Bits 8:15 - DATAST

Bits 4:7 - ADDHLD

Bits 0:3 - ADDSET

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is BEFOREWAITSTATE

Checks if the value of the field is DURINGWAITSTATE

Get enumerated values variant

Checks if the value of the field is ACTIVELOW

Checks if the value of the field is ACTIVEHIGH

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Checks if the value of the field is BITS32

Get enumerated values variant

Checks if the value of the field is SRAM

Checks if the value of the field is PSRAM

Checks if the value of the field is FLASH

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is NOBURSTSPLIT

Checks if the value of the field is BYTES128

Checks if the value of the field is BYTES256

Checks if the value of the field is BYTES512

Checks if the value of the field is BYTES1024

Bit 19 - CBURSTRW

Bit 15 - ASYNCWAIT

Bit 14 - EXTMOD

Bit 13 - WAITEN

Bit 12 - WREN

Bit 11 - WAITCFG

Bit 10 - WRAPMOD

Bit 9 - WAITPOL

Bit 8 - BURSTEN

Bit 6 - FACCEN

Bits 4:5 - MWID

Bits 2:3 - MTYP

Bit 1 - MUXEN

Bit 0 - MBKEN

Bit 21 - Write FIFO disable

Bit 20 - CCLKEN

Bits 16:18 - CRAM page size

Get enumerated values variant

Checks if the value of the field is BYTES256

Checks if the value of the field is BYTES512

Checks if the value of the field is BYTES1024

Checks if the value of the field is BYTES2048

Checks if the value of the field is BYTES4096

Checks if the value of the field is BYTES8192

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is BITS8

Checks if the value of the field is BITS16

Get enumerated values variant

Checks if the value of the field is NANDFLASH

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bits 17:19 - ECCPS

Bits 13:16 - TAR

Bits 9:12 - TCLR

Bit 6 - ECCEN

Bits 4:5 - PWID

Bit 3 - PTYP

Bit 2 - PBKEN

Bit 1 - PWAITEN

Get enumerated values variant

Checks if the value of the field is NOTEMPTY

Checks if the value of the field is EMPTY

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DIDNOTOCCUR

Checks if the value of the field is OCCURRED

Get enumerated values variant

Checks if the value of the field is DIDNOTOCCUR

Checks if the value of the field is OCCURRED

Get enumerated values variant

Checks if the value of the field is DIDNOTOCCUR

Checks if the value of the field is OCCURRED

Bit 6 - FEMPT

Bit 5 - IFEN

Bit 4 - ILEN

Bit 3 - IREN

Bit 2 - IFS

Bit 1 - ILS

Bit 0 - IRS

Bits 24:31 - MEMHIZx

Bits 16:23 - MEMHOLDx

Bits 8:15 - MEMWAITx

Bits 0:7 - MEMSETx

Bits 24:31 - ATTHIZx

Bits 16:23 - ATTHOLDx

Bits 8:15 - ATTWAITx

Bits 0:7 - ATTSETx

Bits 0:31 - ECCx

Get enumerated values variant

Checks if the value of the field is A

Checks if the value of the field is B

Checks if the value of the field is C

Checks if the value of the field is D

Bits 28:29 - ACCMOD

Bits 24:27 - DATLAT

Bits 20:23 - CLKDIV

Bits 8:15 - DATAST

Bits 4:7 - ADDHLD

Bits 0:3 - ADDSET

Bits 16:19 - Bus turnaround phase duration

Bit 31 - DFSDMEN

Bit 30 - CKOUTSRC

Bits 16:23 - CKOUTDIV

Bits 14:15 - DATPACK

Bits 12:13 - DATMPX

Bit 8 - CHINSEL

Bit 7 - CHEN

Bit 6 - CKABEN

Bit 5 - SCDEN

Bits 2:3 - SPICKSEL

Bits 0:1 - SITP

Bits 8:31 - OFFSET

Bits 3:7 - DTRBS

Bits 22:23 - AWFORD

Bits 16:20 - AWFOSR

Bits 12:15 - BKSCD

Bits 0:7 - SCDT

Bits 0:15 - WDATA

Bits 16:31 - INDAT1

Bits 0:15 - INDAT0

Bit 30 - Analog watchdog fast mode select

Bit 29 - Fast conversion mode selection for regular conversions

Bits 24:26 - Regular channel selection

Bit 21 - DMA channel enabled to read data for the regular conversion

Bit 19 - Launch regular conversion synchronously with DFSDM0

Bit 18 - Continuous mode selection for regular conversions

Bit 17 - Software start of a conversion on the regular channel

Bits 13:14 - Trigger enable and trigger edge selection for injected conversions

Bits 8:10 - Trigger signal selection for launching injected conversions

Bit 5 - DMA channel enabled to read data for the injected channel group

Bit 4 - Scanning conversion mode for injected conversions

Bit 3 - Launch an injected conversion synchronously with the DFSDM0 JSWSTART trigger

Bit 1 - Start a conversion of the injected group of channels

Bit 0 - DFSDM enable

Bits 24:31 - short-circuit detector flag

Bits 16:23 - Clock absence flag

Bit 14 - Regular conversion in progress status

Bit 13 - Injected conversion in progress status

Bit 4 - Analog watchdog

Bit 3 - Regular conversion overrun flag

Bit 2 - Injected conversion overrun flag

Bit 1 - End of regular conversion flag

Bit 0 - End of injected conversion flag

Bits 24:31 - Clear the short-circuit detector flag

Bits 16:23 - Clear the clock absence flag

Bit 3 - Clear the regular conversion overrun flag

Bit 2 - Clear the injected conversion overrun flag

Bits 0:7 - Injected channel group selection

Bits 29:31 - Sinc filter order

Bits 16:25 - Sinc filter oversampling ratio (decimation rate)

Bits 0:7 - Integrator oversampling ratio (averaging length)

Bits 8:31 - Injected group conversion data

Bits 0:2 - Injected channel most recently converted

Bits 8:31 - Regular channel conversion data

Bit 4 - Regular channel pending data

Bits 0:2 - Regular channel most recently converted

Bits 8:31 - Analog watchdog high threshold

Bits 0:3 - Break signal assignment to analog watchdog high threshold event

Bits 8:31 - Analog watchdog low threshold

Bits 0:3 - Break signal assignment to analog watchdog low threshold event

Bits 8:15 - Analog watchdog high threshold flag

Bits 0:7 - Analog watchdog low threshold flag

Bits 8:15 - Clear the analog watchdog high threshold flag

Bits 0:7 - Clear the analog watchdog low threshold flag

Bits 8:31 - Extremes detector maximum value

Bits 0:2 - Extremes detector maximum data channel

Bits 8:31 - EXMIN

Bits 0:2 - Extremes detector minimum data channel

Bits 4:31 - 28-bit timer counting conversion time t = CNVCNT[27:0]

Bits 16:23 - Analog watchdog channel selection

Bits 8:15 - Extremes detector channel selection

Bit 6 - Clock absence interrupt enable

Bit 5 - Short-circuit detector interrupt enable

Bit 4 - Analog watchdog interrupt enable

Bit 3 - Regular data overrun interrupt enable

Bit 2 - Injected data overrun interrupt enable

Bit 1 - Regular end of conversion interrupt enable

Bit 0 - Injected end of conversion interrupt enable

Bits 16:23 - Analog watchdog channel selection

Bits 8:15 - Extremes detector channel selection

Bit 6 - Clock absence interrupt enable

Bit 5 - Short-circuit detector interrupt enable

Bit 4 - Analog watchdog interrupt enable

Bit 3 - Regular data overrun interrupt enable

Bit 2 - Injected data overrun interrupt enable

Bit 1 - Regular end of conversion interrupt enable

Bit 0 - Injected end of conversion interrupt enable

Bits 16:23 - Analog watchdog channel selection

Bits 8:15 - Extremes detector channel selection

Bit 6 - Clock absence interrupt enable

Bit 5 - Short-circuit detector interrupt enable

Bit 4 - Analog watchdog interrupt enable

Bit 3 - Regular data overrun interrupt enable

Bit 2 - Injected data overrun interrupt enable

Bit 1 - Regular end of conversion interrupt enable

Bit 0 - Injected end of conversion interrupt enable

Bits 16:23 - Analog watchdog channel selection

Bits 8:15 - Extremes detector channel selection

Bit 6 - Clock absence interrupt enable

Bit 5 - Short-circuit detector interrupt enable

Bit 4 - Analog watchdog interrupt enable

Bit 3 - Regular data overrun interrupt enable

Bit 2 - Injected data overrun interrupt enable

Bit 1 - Regular end of conversion interrupt enable

Bit 0 - Injected end of conversion interrupt enable

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is EDGEALIGNED

Checks if the value of the field is CENTERALIGNED1

Checks if the value of the field is CENTERALIGNED2

Checks if the value of the field is CENTERALIGNED3

Get enumerated values variant

Checks if the value of the field is UP

Checks if the value of the field is DOWN

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ANYEVENT

Checks if the value of the field is COUNTERONLY

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bits 8:9 - Clock division

Bit 7 - Auto-reload preload enable

Bits 5:6 - Center-aligned mode selection

Bit 4 - Direction

Bit 3 - One-pulse mode

Bit 2 - Update request source

Bit 1 - Update disable

Bit 0 - Counter enable

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is XOR

Get enumerated values variant

Checks if the value of the field is RESET

Checks if the value of the field is ENABLE

Checks if the value of the field is UPDATE

Checks if the value of the field is COMPAREPULSE

Checks if the value of the field is COMPAREOC1

Checks if the value of the field is COMPAREOC2

Checks if the value of the field is COMPAREOC3

Checks if the value of the field is COMPAREOC4

Get enumerated values variant

Checks if the value of the field is ONCOMPARE

Checks if the value of the field is ONUPDATE

Bit 14 - Output Idle state 4

Bit 13 - Output Idle state 3

Bit 12 - Output Idle state 3

Bit 11 - Output Idle state 2

Bit 10 - Output Idle state 2

Bit 9 - Output Idle state 1

Bit 8 - Output Idle state 1

Bit 7 - TI1 selection

Bits 4:6 - Master mode selection

Bit 3 - Capture/compare DMA selection

Bit 2 - Capture/compare control update selection

Bit 0 - Capture/compare preloaded control

Get enumerated values variant

Checks if the value of the field is NOTINVERTED

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Checks if the value of the field is DIV8

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is NOSYNC

Checks if the value of the field is SYNC

Get enumerated values variant

Checks if the value of the field is ITR0

Checks if the value of the field is ITR1

Checks if the value of the field is ITR2

Checks if the value of the field is TI1F_ED

Checks if the value of the field is TI1FP1

Checks if the value of the field is TI2FP2

Checks if the value of the field is ETRF

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENCODER_MODE_1

Checks if the value of the field is ENCODER_MODE_2

Checks if the value of the field is ENCODER_MODE_3

Checks if the value of the field is RESET_MODE

Checks if the value of the field is GATED_MODE

Checks if the value of the field is TRIGGER_MODE

Checks if the value of the field is EXT_CLOCK_MODE

Bit 15 - External trigger polarity

Bit 14 - External clock enable

Bits 12:13 - External trigger prescaler

Bits 8:11 - External trigger filter

Bit 7 - Master/Slave mode

Bits 4:6 - Trigger selection

Bits 0:2 - Slave mode selection

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Trigger DMA request enable

Bit 13 - COM DMA request enable

Bit 12 - Capture/Compare 4 DMA request enable

Bit 11 - Capture/Compare 3 DMA request enable

Bit 10 - Capture/Compare 2 DMA request enable

Bit 9 - Capture/Compare 1 DMA request enable

Bit 8 - Update DMA request enable

Bit 6 - Trigger interrupt enable

Bit 4 - Capture/Compare 4 interrupt enable

Bit 3 - Capture/Compare 3 interrupt enable

Bit 2 - Capture/Compare 2 interrupt enable

Bit 1 - Capture/Compare 1 interrupt enable

Bit 0 - Update interrupt enable

Bit 7 - Break interrupt enable

Bit 5 - COM interrupt enable

Get enumerated values variant

Checks if the value of the field is OVERCAPTURE

Get enumerated values variant

Checks if the value of the field is NOTRIGGER

Checks if the value of the field is TRIGGER

Get enumerated values variant

[src]
pub fn is_match_(&self) -> bool

Checks if the value of the field is MATCH

Get enumerated values variant

Checks if the value of the field is CLEAR

Checks if the value of the field is UPDATEPENDING

Bit 12 - Capture/Compare 4 overcapture flag

Bit 11 - Capture/Compare 3 overcapture flag

Bit 10 - Capture/compare 2 overcapture flag

Bit 9 - Capture/Compare 1 overcapture flag

Bit 7 - Break interrupt flag

Bit 6 - Trigger interrupt flag

Bit 5 - COM interrupt flag

Bit 4 - Capture/Compare 4 interrupt flag

Bit 3 - Capture/Compare 3 interrupt flag

Bit 2 - Capture/Compare 2 interrupt flag

Bit 1 - Capture/compare 1 interrupt flag

Bit 0 - Update interrupt flag

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output Compare 2 clear enable

Bits 12:14 - Output Compare 2 mode

Bit 11 - Output Compare 2 preload enable

Bit 10 - Output Compare 2 fast enable

Bits 8:9 - Capture/Compare 2 selection

Bit 7 - Output Compare 1 clear enable

Bits 4:6 - Output Compare 1 mode

Bit 3 - Output Compare 1 preload enable

Bit 2 - Output Compare 1 fast enable

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is TI2

Checks if the value of the field is TI1

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is TI1

Checks if the value of the field is TI2

Checks if the value of the field is TRC

Bits 12:15 - Input capture 2 filter

Bits 10:11 - Input capture 2 prescaler

Bits 8:9 - Capture/Compare 2 selection

Bits 4:7 - Input capture 1 filter

Bits 2:3 - Input capture 1 prescaler

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output compare 4 clear enable

Bits 12:14 - Output compare 4 mode

Bit 11 - Output compare 4 preload enable

Bit 10 - Output compare 4 fast enable

Bits 8:9 - Capture/Compare 4 selection

Bit 7 - Output compare 3 clear enable

Bits 4:6 - Output compare 3 mode

Bit 3 - Output compare 3 preload enable

Bit 2 - Output compare 3 fast enable

Bits 0:1 - Capture/Compare 3 selection

Get enumerated values variant

Checks if the value of the field is TI4

Checks if the value of the field is TI3

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is TI3

Checks if the value of the field is TI4

Checks if the value of the field is TRC

Bits 12:15 - Input capture 4 filter

Bits 10:11 - Input capture 4 prescaler

Bits 8:9 - Capture/Compare 4 selection

Bits 4:7 - Input capture 3 filter

Bits 2:3 - Input capture 3 prescaler

Bits 0:1 - Capture/compare 3 selection

Bit 13 - Capture/Compare 3 output Polarity

Bit 12 - Capture/Compare 4 output enable

Bit 11 - Capture/Compare 3 output Polarity

Bit 10 - Capture/Compare 3 complementary output enable

Bit 9 - Capture/Compare 3 output Polarity

Bit 8 - Capture/Compare 3 output enable

Bit 7 - Capture/Compare 2 output Polarity

Bit 6 - Capture/Compare 2 complementary output enable

Bit 5 - Capture/Compare 2 output Polarity

Bit 4 - Capture/Compare 2 output enable

Bit 3 - Capture/Compare 1 output Polarity

Bit 2 - Capture/Compare 1 complementary output enable

Bit 1 - Capture/Compare 1 output Polarity

Bit 0 - Capture/Compare 1 output enable

Bits 0:15 - counter value

Bits 0:15 - Prescaler value

Bits 0:15 - Auto-reload value

Bits 0:7 - Repetition counter value

Bits 0:15 - Capture/Compare 1 value

Get enumerated values variant

Checks if the value of the field is DISABLEDIDLE

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is IDLELEVEL

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is IDLELEVEL

Bit 15 - Main output enable

Bit 14 - Automatic output enable

Bit 13 - Break polarity

Bit 12 - Break enable

Bit 11 - Off-state selection for Run mode

Bit 10 - Off-state selection for Idle mode

Bits 8:9 - Lock configuration

Bits 0:7 - Dead-time generator setup

Bits 8:12 - DMA burst length

Bits 0:4 - DMA base address

Bits 0:15 - DMA register for burst accesses

Bits 0:1 - External trigger remap on ADC2 analog watchdog

Bits 2:3 - External trigger remap on ADC3 analog watchdog

Bit 4 - Input Capture 1 remap

Bit 24 - Output Compare 6 mode bit 3

Bits 16:18 - Output Compare 5 mode bit 3

Bit 15 - Output compare 6 clear enable

Bits 12:14 - Output compare 6 mode

Bit 11 - Output compare 6 preload enable

Bit 10 - Output compare 6 fast enable

Bit 7 - Output compare 5 clear enable

Bits 4:6 - Output compare 5 mode

Bit 3 - Output compare 5 preload enable

Bit 2 - Output compare 5 fast enable

Bits 0:15 - Capture/Compare value

Bit 29 - Group Channel 5 and Channel 1

Bit 30 - Group Channel 5 and Channel 2

Bit 31 - Group Channel 5 and Channel 3

Bits 0:15 - Capture/Compare value

Bit 0 - BRK BKIN input enable

Bit 1 - BRK COMP1 enable

Bit 2 - BRK COMP2 enable

Bit 8 - BRK DFSDM_BREAK2 enable

Bit 9 - BRK BKIN input polarity

Bit 10 - BRK COMP1 input polarity

Bit 11 - BRK COMP2 input polarity

Bits 14:16 - ETR source selection

Bit 0 - BRK2 BKIN input enable

Bit 1 - BRK2 COMP1 enable

Bit 2 - BRK2 COMP2 enable

Bit 8 - BRK2 DFSDM_BREAK3 enable

Bit 9 - BRK2 BKIN input polarity

Bit 10 - BRK2 COMP1 input polarity

Bit 11 - BRK2 COMP2 input polarity

Get enumerated values variant

Checks if the value of the field is RANGE100K

Checks if the value of the field is RANGE200K

Checks if the value of the field is RANGE400K

Checks if the value of the field is RANGE800K

Checks if the value of the field is RANGE1M

Checks if the value of the field is RANGE2M

Checks if the value of the field is RANGE4M

Checks if the value of the field is RANGE8M

Checks if the value of the field is RANGE16M

Checks if the value of the field is RANGE24M

Checks if the value of the field is RANGE32M

Checks if the value of the field is RANGE48M

Bit 29 - SAI2 PLL clock ready flag

Bit 28 - SAI2 PLL enable

Bit 27 - SAI1 PLL clock ready flag

Bit 26 - SAI1 PLL enable

Bit 25 - Main PLL clock ready flag

Bit 24 - Main PLL enable

Bit 18 - HSE crystal oscillator bypass

Bit 17 - HSE clock ready flag

Bit 16 - HSE clock enable

Bit 11 - HSI automatic start from Stop

Bit 10 - HSI clock ready flag

Bit 9 - HSI always enable for peripheral kernels

Bit 8 - HSI clock enable

Bits 4:7 - MSI clock ranges

Bit 2 - MSI clock PLL enable

Bit 1 - MSI clock ready flag

Bit 0 - MSI clock enable

Bits 24:28 - HSI clock trimming

Bits 16:23 - HSI clock calibration

Bits 8:15 - MSI clock trimming

Bits 0:7 - MSI clock calibration

Bits 28:30 - Microcontroller clock output prescaler

Bits 24:26 - Microcontroller clock output

Bit 15 - Wakeup from Stop and CSS backup clock selection

Bits 11:13 - APB high-speed prescaler (APB2)

Bits 8:10 - PB low-speed prescaler (APB1)

Bits 4:7 - AHB prescaler

Bits 2:3 - System clock switch status

Bits 0:1 - System clock switch

Bits 25:26 - Main PLL division factor for PLLCLK (system clock)

Bit 24 - Main PLL PLLCLK output enable

Bits 21:22 - Main PLL division factor for PLLUSB1CLK(48 MHz clock)

Bit 20 - Main PLL PLLUSB1CLK output enable

Bit 17 - Main PLL division factor for PLLSAI3CLK (SAI1 and SAI2 clock)

Bit 16 - Main PLL PLLSAI3CLK output enable

Bits 8:14 - Main PLL multiplication factor for VCO

Bits 4:6 - Division factor for the main PLL and audio PLL (PLLSAI1 and PLLSAI2) input clock

Bits 0:1 - Main PLL, PLLSAI1 and PLLSAI2 entry clock source

Bits 25:26 - PLLSAI1 division factor for PLLADC1CLK (ADC clock)

Bit 24 - PLLSAI1 PLLADC1CLK output enable

Bits 21:22 - SAI1PLL division factor for PLLUSB2CLK (48 MHz clock)

Bit 20 - SAI1PLL PLLUSB2CLK output enable

Bit 17 - SAI1PLL division factor for PLLSAI1CLK (SAI1 or SAI2 clock)

Bit 16 - SAI1PLL PLLSAI1CLK output enable

Bits 8:14 - SAI1PLL multiplication factor for VCO

Bits 25:26 - PLLSAI2 division factor for PLLADC2CLK (ADC clock)

Bit 24 - PLLSAI2 PLLADC2CLK output enable

Bit 17 - SAI1PLL division factor for PLLSAI2CLK (SAI1 or SAI2 clock)

Bit 16 - SAI2PLL PLLSAI2CLK output enable

Bits 8:14 - SAI2PLL multiplication factor for VCO

Bit 9 - LSE clock security system interrupt enable

Bit 7 - PLLSAI2 ready interrupt enable

Bit 6 - PLLSAI1 ready interrupt enable

Bit 5 - PLL ready interrupt enable

Bit 4 - HSE ready interrupt enable

Bit 3 - HSI ready interrupt enable

Bit 2 - MSI ready interrupt enable

Bit 1 - LSE ready interrupt enable

Bit 0 - LSI ready interrupt enable

Bit 9 - LSE Clock security system interrupt flag

Bit 8 - Clock security system interrupt flag

Bit 7 - PLLSAI2 ready interrupt flag

Bit 6 - PLLSAI1 ready interrupt flag

Bit 5 - PLL ready interrupt flag

Bit 4 - HSE ready interrupt flag

Bit 3 - HSI ready interrupt flag

Bit 2 - MSI ready interrupt flag

Bit 1 - LSE ready interrupt flag

Bit 0 - LSI ready interrupt flag

Bit 16 - Touch Sensing Controller reset

Bit 11 - CRC reset

Bit 8 - Flash memory interface reset

Bit 1 - DMA2 reset

Bit 0 - DMA1 reset

Bit 18 - Random number generator reset

Bit 16 - AES hardware accelerator reset

Bit 13 - ADC reset

Bit 12 - USB OTG FS reset

Bit 7 - IO port H reset

Bit 6 - IO port G reset

Bit 5 - IO port F reset

Bit 4 - IO port E reset

Bit 3 - IO port D reset

Bit 2 - IO port C reset

Bit 1 - IO port B reset

Bit 0 - IO port A reset

Bit 8 - Quad SPI memory interface reset

Bit 0 - Flexible memory controller reset

Bit 31 - Low Power Timer 1 reset

Bit 30 - OPAMP interface reset

Bit 29 - DAC1 interface reset

Bit 28 - Power interface reset

Bit 25 - CAN1 reset

Bit 23 - I2C3 reset

Bit 22 - I2C2 reset

Bit 21 - I2C1 reset

Bit 20 - UART5 reset

Bit 19 - UART4 reset

Bit 18 - USART3 reset

Bit 17 - USART2 reset

Bit 15 - SPI3 reset

Bit 14 - SPI2 reset

Bit 9 - LCD interface reset

Bit 5 - TIM7 timer reset

Bit 4 - TIM6 timer reset

Bit 3 - TIM5 timer reset

Bit 2 - TIM3 timer reset

Bit 1 - TIM3 timer reset

Bit 0 - TIM2 timer reset

Bit 5 - Low-power timer 2 reset

Bit 2 - Single wire protocol reset

Bit 0 - Low-power UART 1 reset

Bit 24 - Digital filters for sigma-delata modulators (DFSDM) reset

Bit 22 - Serial audio interface 2 (SAI2) reset

Bit 21 - Serial audio interface 1 (SAI1) reset

Bit 18 - TIM17 timer reset

Bit 17 - TIM16 timer reset

Bit 16 - TIM15 timer reset

Bit 14 - USART1 reset

Bit 13 - TIM8 timer reset

Bit 12 - SPI1 reset

Bit 11 - TIM1 timer reset

Bit 10 - SDMMC reset

Bit 0 - System configuration (SYSCFG) reset

Bit 16 - Touch Sensing Controller clock enable

Bit 11 - CRC clock enable

Bit 8 - Flash memory interface clock enable

Bit 1 - DMA2 clock enable

Bit 0 - DMA1 clock enable

Bit 18 - Random Number Generator clock enable

Bit 16 - AES accelerator clock enable

Bit 13 - ADC clock enable

Bit 12 - OTG full speed clock enable

Bit 7 - IO port H clock enable

Bit 6 - IO port G clock enable

Bit 5 - IO port F clock enable

Bit 4 - IO port E clock enable

Bit 3 - IO port D clock enable

Bit 2 - IO port C clock enable

Bit 1 - IO port B clock enable

Bit 0 - IO port A clock enable

Bit 8 - QSPIEN

Bit 0 - Flexible memory controller clock enable

Bit 31 - Low power timer 1 clock enable

Bit 30 - OPAMP interface clock enable

Bit 29 - DAC1 interface clock enable

Bit 28 - Power interface clock enable

Bit 25 - CAN1 clock enable

Bit 23 - I2C3 clock enable

Bit 22 - I2C2 clock enable

Bit 21 - I2C1 clock enable

Bit 20 - UART5 clock enable

Bit 19 - UART4 clock enable

Bit 18 - USART3 clock enable

Bit 17 - USART2 clock enable

Bit 15 - SPI peripheral 3 clock enable

Bit 14 - SPI2 clock enable

Bit 11 - Window watchdog clock enable

Bit 9 - LCD clock enable

Bit 5 - TIM7 timer clock enable

Bit 4 - TIM6 timer clock enable

Bit 3 - TIM5 timer clock enable

Bit 2 - TIM4 timer clock enable

Bit 1 - TIM3 timer clock enable

Bit 0 - TIM2 timer clock enable

Bit 10 - Enables the real time clock (RTC) peripheral

Bit 5 - LPTIM2EN

Bit 2 - Single wire protocol clock enable

Bit 0 - Low power UART 1 clock enable

Bit 24 - DFSDM timer clock enable

Bit 22 - SAI2 clock enable

Bit 21 - SAI1 clock enable

Bit 18 - TIM17 timer clock enable

Bit 17 - TIM16 timer clock enable

Bit 16 - TIM15 timer clock enable

Bit 14 - USART1clock enable

Bit 13 - TIM8 timer clock enable

Bit 12 - SPI1 clock enable

Bit 11 - TIM1 timer clock enable

Bit 10 - SDMMC clock enable

Bit 7 - Firewall clock enable

Bit 0 - SYSCFG clock enable

Bit 16 - Touch Sensing Controller clocks enable during Sleep and Stop modes

Bit 11 - CRCSMEN

Bit 9 - SRAM1 interface clocks enable during Sleep and Stop modes

Bit 8 - Flash memory interface clocks enable during Sleep and Stop modes

Bit 1 - DMA2 clocks enable during Sleep and Stop modes

Bit 0 - DMA1 clocks enable during Sleep and Stop modes

Bit 18 - Random Number Generator clocks enable during Sleep and Stop modes

Bit 16 - AES accelerator clocks enable during Sleep and Stop modes

Bit 13 - ADC clocks enable during Sleep and Stop modes

Bit 12 - OTG full speed clocks enable during Sleep and Stop modes

Bit 9 - SRAM2 interface clocks enable during Sleep and Stop modes

Bit 7 - IO port H clocks enable during Sleep and Stop modes

Bit 6 - IO port G clocks enable during Sleep and Stop modes

Bit 5 - IO port F clocks enable during Sleep and Stop modes

Bit 4 - IO port E clocks enable during Sleep and Stop modes

Bit 3 - IO port D clocks enable during Sleep and Stop modes

Bit 2 - IO port C clocks enable during Sleep and Stop modes

Bit 1 - IO port B clocks enable during Sleep and Stop modes

Bit 0 - IO port A clocks enable during Sleep and Stop modes

Bit 8 - QSPISMEN

Bit 0 - Flexible memory controller clocks enable during Sleep and Stop modes

Bit 31 - Low power timer 1 clocks enable during Sleep and Stop modes

Bit 30 - OPAMP interface clocks enable during Sleep and Stop modes

Bit 29 - DAC1 interface clocks enable during Sleep and Stop modes

Bit 28 - Power interface clocks enable during Sleep and Stop modes

Bit 25 - CAN1 clocks enable during Sleep and Stop modes

Bit 23 - I2C3 clocks enable during Sleep and Stop modes

Bit 22 - I2C2 clocks enable during Sleep and Stop modes

Bit 21 - I2C1 clocks enable during Sleep and Stop modes

Bit 20 - UART5 clocks enable during Sleep and Stop modes

Bit 19 - UART4 clocks enable during Sleep and Stop modes

Bit 18 - USART3 clocks enable during Sleep and Stop modes

Bit 17 - USART2 clocks enable during Sleep and Stop modes

Bit 15 - SPI3 clocks enable during Sleep and Stop modes

Bit 14 - SPI2 clocks enable during Sleep and Stop modes

Bit 11 - Window watchdog clocks enable during Sleep and Stop modes

Bit 9 - LCD clocks enable during Sleep and Stop modes

Bit 5 - TIM7 timer clocks enable during Sleep and Stop modes

Bit 4 - TIM6 timer clocks enable during Sleep and Stop modes

Bit 3 - TIM5 timer clocks enable during Sleep and Stop modes

Bit 2 - TIM4 timer clocks enable during Sleep and Stop modes

Bit 1 - TIM3 timer clocks enable during Sleep and Stop modes

Bit 0 - TIM2 timer clocks enable during Sleep and Stop modes

Bit 10 - RTC APB clock enable during Sleep and Stop modes

Bit 5 - LPTIM2SMEN

Bit 2 - Single wire protocol clocks enable during Sleep and Stop modes

Bit 0 - Low power UART 1 clocks enable during Sleep and Stop modes

Bit 24 - DFSDM timer clocks enable during Sleep and Stop modes

Bit 22 - SAI2 clocks enable during Sleep and Stop modes

Bit 21 - SAI1 clocks enable during Sleep and Stop modes

Bit 18 - TIM17 timer clocks enable during Sleep and Stop modes

Bit 17 - TIM16 timer clocks enable during Sleep and Stop modes

Bit 16 - TIM15 timer clocks enable during Sleep and Stop modes

Bit 14 - USART1clocks enable during Sleep and Stop modes

Bit 13 - TIM8 timer clocks enable during Sleep and Stop modes

Bit 12 - SPI1 clocks enable during Sleep and Stop modes

Bit 11 - TIM1 timer clocks enable during Sleep and Stop modes

Bit 10 - SDMMC clocks enable during Sleep and Stop modes

Bit 0 - SYSCFG clocks enable during Sleep and Stop modes

Bit 31 - DFSDM clock source selection

Bit 30 - SWPMI1 clock source selection

Bits 28:29 - ADCs clock source selection

Bits 26:27 - 48 MHz clock source selection

Bits 24:25 - SAI2 clock source selection

Bits 22:23 - SAI1 clock source selection

Bits 20:21 - Low power timer 2 clock source selection

Bits 18:19 - Low power timer 1 clock source selection

Bits 16:17 - I2C3 clock source selection

Bits 14:15 - I2C2 clock source selection

Bits 12:13 - I2C1 clock source selection

Bits 10:11 - LPUART1 clock source selection

Bits 8:9 - UART5 clock source selection

Bits 6:7 - UART4 clock source selection

Bits 4:5 - USART3 clock source selection

Bits 2:3 - USART2 clock source selection

Bits 0:1 - USART1 clock source selection

Bit 25 - Low speed clock output selection

Bit 24 - Low speed clock output enable

Bit 16 - Backup domain software reset

Bit 15 - RTC clock enable

Bits 8:9 - RTC clock source selection

Bit 6 - LSECSSD

Bit 5 - LSECSSON

Bits 3:4 - SE oscillator drive capability

Bit 2 - LSE oscillator bypass

Bit 1 - LSE oscillator ready

Bit 0 - LSE oscillator enable

Bit 31 - Low-power reset flag

Bit 30 - Window watchdog reset flag

Bit 29 - Independent window watchdog reset flag

Bit 28 - Software reset flag

Bit 27 - BOR flag

Bit 26 - Pin reset flag

Bit 25 - Option byte loader reset flag

Bit 24 - Firewall reset flag

Bit 23 - Remove reset flag

Bits 8:11 - SI range after Standby mode

Bit 1 - LSI oscillator ready

Bit 0 - LSI oscillator enable

Bits 7:15 - These bits are initialized at startup with the factory-programmed HSI48 calibration trim value.

Bit 1 - Set by hardware to indicate that HSI48 oscillator is stable. This bit is set only when HSI48 is enabled by software by setting HSI48ON.

Bit 0 - Set and cleared by software. Cleared by hardware to stop the HSI48 when entering in Stop, Standby or Shutdown modes.

Bit 0 - ADDRDY_MST

Bit 1 - EOSMP_MST

Bit 2 - EOC_MST

Bit 3 - EOS_MST

Bit 4 - OVR_MST

Bit 5 - JEOC_MST

Bit 6 - JEOS_MST

Bit 7 - AWD1_MST

Bit 8 - AWD2_MST

Bit 9 - AWD3_MST

Bit 10 - JQOVF_MST

Bit 16 - ADRDY_SLV

Bit 17 - EOSMP_SLV

Bit 18 - End of regular conversion of the slave ADC

Bit 19 - End of regular sequence flag of the slave ADC

Bit 20 - Overrun flag of the slave ADC

Bit 21 - End of injected conversion flag of the slave ADC

Bit 22 - End of injected sequence flag of the slave ADC

Bit 23 - Analog watchdog 1 flag of the slave ADC

Bit 24 - Analog watchdog 2 flag of the slave ADC

Bit 25 - Analog watchdog 3 flag of the slave ADC

Bit 26 - Injected Context Queue Overflow flag of the slave ADC

Bits 0:4 - Multi ADC mode selection

Bits 8:11 - Delay between 2 sampling phases

Bit 13 - DMA configuration (for multi-ADC mode)

Bits 14:15 - Direct memory access mode for multi ADC mode

Bits 16:17 - ADC clock mode

Bit 22 - VREFINT enable

Bit 23 - CH18 selection (Vbat)

Bit 24 - CH17 selection (temperature)

Bits 16:31 - Regular data of the slave ADC

Bits 0:15 - Regular data of the master ADC

Bits 0:15 - Device Identifier

Bits 16:31 - Revision Identifier

Bit 0 - Debug Sleep Mode

Bit 1 - Debug Stop Mode

Bit 2 - Debug Standby Mode

Bit 5 - Trace pin assignment control

Bits 6:7 - Trace pin assignment control

Bit 0 - Debug Timer 2 stopped when Core is halted

Bit 1 - TIM3 counter stopped when core is halted

Bit 2 - TIM4 counter stopped when core is halted

Bit 3 - TIM5 counter stopped when core is halted

Bit 4 - Debug Timer 6 stopped when Core is halted

Bit 5 - TIM7 counter stopped when core is halted

Bit 10 - Debug RTC stopped when Core is halted

Bit 11 - Debug Window Wachdog stopped when Core is halted

Bit 12 - Debug Independent Wachdog stopped when Core is halted

Bit 21 - I2C1 SMBUS timeout mode stopped when core is halted

Bit 22 - I2C2 SMBUS timeout mode stopped when core is halted

Bit 23 - I2C3 SMBUS timeout counter stopped when core is halted

Bit 25 - bxCAN stopped when core is halted

Bit 31 - LPTIM1 counter stopped when core is halted

Bit 5 - LPTIM2 counter stopped when core is halted

Bit 11 - TIM1 counter stopped when core is halted

Bit 13 - TIM8 counter stopped when core is halted

Bit 16 - TIM15 counter stopped when core is halted

Bit 17 - TIM16 counter stopped when core is halted

Bit 18 - TIM17 counter stopped when core is halted

Bit 0 - LSPACT

Bit 1 - USER

Bit 3 - THREAD

Bit 4 - HFRDY

Bit 5 - MMRDY

Bit 6 - BFRDY

Bit 8 - MONRDY

Bit 30 - LSPEN

Bit 31 - ASPEN

Bits 3:31 - Location of unpopulated floating-point

Bit 0 - Invalid operation cumulative exception bit

Bit 1 - Division by zero cumulative exception bit.

Bit 2 - Overflow cumulative exception bit

Bit 3 - Underflow cumulative exception bit

Bit 4 - Inexact cumulative exception bit

Bit 7 - Input denormal cumulative exception bit.

Bits 22:23 - Rounding Mode control field

Bit 24 - Flush-to-zero mode control bit:

Bit 25 - Default NaN mode control bit

Bit 26 - Alternative half-precision control bit

Bit 28 - Overflow condition code flag

Bit 29 - Carry condition code flag

Bit 30 - Zero condition code flag

Bit 31 - Negative condition code flag

Bit 0 - Counter enable

Bit 1 - SysTick exception request enable

Bit 2 - Clock source selection

Bit 16 - COUNTFLAG

Bits 0:23 - RELOAD value

Bits 0:23 - Current counter value

Bits 0:23 - Calibration value

Bit 30 - SKEW flag: Indicates whether the TENMS value is exact

Bit 31 - NOREF flag. Reads as zero

Bits 0:8 - Software generated interrupt ID

Bits 20:23 - CP

Bit 0 - DISMCYCINT

Bit 1 - DISDEFWBUF

Bit 2 - DISFOLD

Bit 8 - DISFPCA

Bit 9 - DISOOFP

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is EDGEALIGNED

Checks if the value of the field is CENTERALIGNED1

Checks if the value of the field is CENTERALIGNED2

Checks if the value of the field is CENTERALIGNED3

Get enumerated values variant

Checks if the value of the field is UP

Checks if the value of the field is DOWN

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ANYEVENT

Checks if the value of the field is COUNTERONLY

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bits 8:9 - Clock division

Bit 7 - Auto-reload preload enable

Bits 5:6 - Center-aligned mode selection

Bit 4 - Direction

Bit 3 - One-pulse mode

Bit 2 - Update request source

Bit 1 - Update disable

Bit 0 - Counter enable

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is XOR

Get enumerated values variant

Checks if the value of the field is RESET

Checks if the value of the field is ENABLE

Checks if the value of the field is UPDATE

Checks if the value of the field is COMPAREPULSE

Checks if the value of the field is COMPAREOC1

Checks if the value of the field is COMPAREOC2

Checks if the value of the field is COMPAREOC3

Checks if the value of the field is COMPAREOC4

Get enumerated values variant

Checks if the value of the field is ONCOMPARE

Checks if the value of the field is ONUPDATE

Bit 7 - TI1 selection

Bits 4:6 - Master mode selection

Bit 3 - Capture/compare DMA selection

Get enumerated values variant

Checks if the value of the field is NOTINVERTED

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Checks if the value of the field is DIV8

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is NOSYNC

Checks if the value of the field is SYNC

Get enumerated values variant

Checks if the value of the field is ITR0

Checks if the value of the field is ITR1

Checks if the value of the field is ITR2

Checks if the value of the field is TI1F_ED

Checks if the value of the field is TI1FP1

Checks if the value of the field is TI2FP2

Checks if the value of the field is ETRF

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENCODER_MODE_1

Checks if the value of the field is ENCODER_MODE_2

Checks if the value of the field is ENCODER_MODE_3

Checks if the value of the field is RESET_MODE

Checks if the value of the field is GATED_MODE

Checks if the value of the field is TRIGGER_MODE

Checks if the value of the field is EXT_CLOCK_MODE

Bit 15 - External trigger polarity

Bit 14 - External clock enable

Bits 12:13 - External trigger prescaler

Bits 8:11 - External trigger filter

Bit 7 - Master/Slave mode

Bits 4:6 - Trigger selection

Bits 0:2 - Slave mode selection

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Trigger DMA request enable

Bit 13 - COM DMA request enable

Bit 12 - Capture/Compare 4 DMA request enable

Bit 11 - Capture/Compare 3 DMA request enable

Bit 10 - Capture/Compare 2 DMA request enable

Bit 9 - Capture/Compare 1 DMA request enable

Bit 8 - Update DMA request enable

Bit 6 - Trigger interrupt enable

Bit 4 - Capture/Compare 4 interrupt enable

Bit 3 - Capture/Compare 3 interrupt enable

Bit 2 - Capture/Compare 2 interrupt enable

Bit 1 - Capture/Compare 1 interrupt enable

Bit 0 - Update interrupt enable

Get enumerated values variant

Checks if the value of the field is OVERCAPTURE

Get enumerated values variant

Checks if the value of the field is NOTRIGGER

Checks if the value of the field is TRIGGER

Get enumerated values variant

[src]
pub fn is_match_(&self) -> bool

Checks if the value of the field is MATCH

Get enumerated values variant

Checks if the value of the field is CLEAR

Checks if the value of the field is UPDATEPENDING

Bit 12 - Capture/Compare 4 overcapture flag

Bit 11 - Capture/Compare 3 overcapture flag

Bit 10 - Capture/compare 2 overcapture flag

Bit 9 - Capture/Compare 1 overcapture flag

Bit 6 - Trigger interrupt flag

Bit 4 - Capture/Compare 4 interrupt flag

Bit 3 - Capture/Compare 3 interrupt flag

Bit 2 - Capture/Compare 2 interrupt flag

Bit 1 - Capture/compare 1 interrupt flag

Bit 0 - Update interrupt flag

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output compare 2 clear enable

Bits 12:14 - Output compare 2 mode

Bit 11 - Output compare 2 preload enable

Bit 10 - Output compare 2 fast enable

Bits 8:9 - Capture/Compare 2 selection

Bit 7 - Output compare 1 clear enable

Bits 4:6 - Output compare 1 mode

Bit 3 - Output compare 1 preload enable

Bit 2 - Output compare 1 fast enable

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is TI2

Checks if the value of the field is TI1

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is TI1

Checks if the value of the field is TI2

Checks if the value of the field is TRC

Bits 12:15 - Input capture 2 filter

Bits 10:11 - Input capture 2 prescaler

Bits 8:9 - Capture/compare 2 selection

Bits 4:7 - Input capture 1 filter

Bits 2:3 - Input capture 1 prescaler

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output compare 4 clear enable

Bits 12:14 - Output compare 4 mode

Bit 11 - Output compare 4 preload enable

Bit 10 - Output compare 4 fast enable

Bits 8:9 - Capture/Compare 4 selection

Bit 7 - Output compare 3 clear enable

Bits 4:6 - Output compare 3 mode

Bit 3 - Output compare 3 preload enable

Bit 2 - Output compare 3 fast enable

Bits 0:1 - Capture/Compare 3 selection

Get enumerated values variant

Checks if the value of the field is TI4

Checks if the value of the field is TI3

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is TI3

Checks if the value of the field is TI4

Checks if the value of the field is TRC

Bits 12:15 - Input capture 4 filter

Bits 10:11 - Input capture 4 prescaler

Bits 8:9 - Capture/Compare 4 selection

Bits 4:7 - Input capture 3 filter

Bits 2:3 - Input capture 3 prescaler

Bits 0:1 - Capture/Compare 3 selection

Bit 15 - Capture/Compare 4 output Polarity

Bit 13 - Capture/Compare 3 output Polarity

Bit 12 - Capture/Compare 4 output enable

Bit 11 - Capture/Compare 3 output Polarity

Bit 9 - Capture/Compare 3 output Polarity

Bit 8 - Capture/Compare 3 output enable

Bit 7 - Capture/Compare 2 output Polarity

Bit 5 - Capture/Compare 2 output Polarity

Bit 4 - Capture/Compare 2 output enable

Bit 3 - Capture/Compare 1 output Polarity

Bit 1 - Capture/Compare 1 output Polarity

Bit 0 - Capture/Compare 1 output enable

Bits 16:31 - High counter value (TIM2 only)

Bits 0:15 - Counter value

Bits 0:15 - Prescaler value

Bits 16:31 - High Auto-reload value (TIM2 only)

Bits 0:15 - Auto-reload value

Bits 16:31 - High Capture/Compare 1 value (TIM2 only)

Bits 0:15 - Capture/Compare 1 value

Bits 8:12 - DMA burst length

Bits 0:4 - DMA base address

Bits 0:15 - DMA register for burst accesses

Bits 0:2 - Timer2 ETR remap

Bits 3:4 - Internal trigger

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is EDGEALIGNED

Checks if the value of the field is CENTERALIGNED1

Checks if the value of the field is CENTERALIGNED2

Checks if the value of the field is CENTERALIGNED3

Get enumerated values variant

Checks if the value of the field is UP

Checks if the value of the field is DOWN

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is ANYEVENT

Checks if the value of the field is COUNTERONLY

Get enumerated values variant

Checks if the value of the field is ENABLED

Checks if the value of the field is DISABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bits 8:9 - Clock division

Bit 7 - Auto-reload preload enable

Bits 5:6 - Center-aligned mode selection

Bit 4 - Direction

Bit 3 - One-pulse mode

Bit 2 - Update request source

Bit 1 - Update disable

Bit 0 - Counter enable

Get enumerated values variant

Checks if the value of the field is NORMAL

Checks if the value of the field is XOR

Get enumerated values variant

Checks if the value of the field is RESET

Checks if the value of the field is ENABLE

Checks if the value of the field is UPDATE

Checks if the value of the field is COMPAREPULSE

Checks if the value of the field is COMPAREOC1

Checks if the value of the field is COMPAREOC2

Checks if the value of the field is COMPAREOC3

Checks if the value of the field is COMPAREOC4

Get enumerated values variant

Checks if the value of the field is ONCOMPARE

Checks if the value of the field is ONUPDATE

Bit 7 - TI1 selection

Bits 4:6 - Master mode selection

Bit 3 - Capture/compare DMA selection

Get enumerated values variant

Checks if the value of the field is NOTINVERTED

Checks if the value of the field is INVERTED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DIV1

Checks if the value of the field is DIV2

Checks if the value of the field is DIV4

Checks if the value of the field is DIV8

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is NOSYNC

Checks if the value of the field is SYNC

Get enumerated values variant

Checks if the value of the field is ITR0

Checks if the value of the field is ITR1

Checks if the value of the field is ITR2

Checks if the value of the field is TI1F_ED

Checks if the value of the field is TI1FP1

Checks if the value of the field is TI2FP2

Checks if the value of the field is ETRF

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENCODER_MODE_1

Checks if the value of the field is ENCODER_MODE_2

Checks if the value of the field is ENCODER_MODE_3

Checks if the value of the field is RESET_MODE

Checks if the value of the field is GATED_MODE

Checks if the value of the field is TRIGGER_MODE

Checks if the value of the field is EXT_CLOCK_MODE

Bit 15 - External trigger polarity

Bit 14 - External clock enable

Bits 12:13 - External trigger prescaler

Bits 8:11 - External trigger filter

Bit 7 - Master/Slave mode

Bits 4:6 - Trigger selection

Bits 0:2 - Slave mode selection

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Bit 14 - Trigger DMA request enable

Bit 13 - COM DMA request enable

Bit 12 - Capture/Compare 4 DMA request enable

Bit 11 - Capture/Compare 3 DMA request enable

Bit 10 - Capture/Compare 2 DMA request enable

Bit 9 - Capture/Compare 1 DMA request enable

Bit 8 - Update DMA request enable

Bit 6 - Trigger interrupt enable

Bit 4 - Capture/Compare 4 interrupt enable

Bit 3 - Capture/Compare 3 interrupt enable

Bit 2 - Capture/Compare 2 interrupt enable

Bit 1 - Capture/Compare 1 interrupt enable

Bit 0 - Update interrupt enable

Get enumerated values variant

Checks if the value of the field is OVERCAPTURE

Get enumerated values variant

Checks if the value of the field is NOTRIGGER

Checks if the value of the field is TRIGGER

Get enumerated values variant

[src]
pub fn is_match_(&self) -> bool

Checks if the value of the field is MATCH

Get enumerated values variant

Checks if the value of the field is CLEAR

Checks if the value of the field is UPDATEPENDING

Bit 12 - Capture/Compare 4 overcapture flag

Bit 11 - Capture/Compare 3 overcapture flag

Bit 10 - Capture/compare 2 overcapture flag

Bit 9 - Capture/Compare 1 overcapture flag

Bit 6 - Trigger interrupt flag

Bit 4 - Capture/Compare 4 interrupt flag

Bit 3 - Capture/Compare 3 interrupt flag

Bit 2 - Capture/Compare 2 interrupt flag

Bit 1 - Capture/compare 1 interrupt flag

Bit 0 - Update interrupt flag

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output compare 2 clear enable

Bits 12:14 - Output compare 2 mode

Bit 11 - Output compare 2 preload enable

Bit 10 - Output compare 2 fast enable

Bits 8:9 - Capture/Compare 2 selection

Bit 7 - Output compare 1 clear enable

Bits 4:6 - Output compare 1 mode

Bit 3 - Output compare 1 preload enable

Bit 2 - Output compare 1 fast enable

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is TI2

Checks if the value of the field is TI1

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is NOFILTER

Checks if the value of the field is FCK_INT_N2

Checks if the value of the field is FCK_INT_N4

Checks if the value of the field is FCK_INT_N8

Checks if the value of the field is FDTS_DIV2_N6

Checks if the value of the field is FDTS_DIV2_N8

Checks if the value of the field is FDTS_DIV4_N6

Checks if the value of the field is FDTS_DIV4_N8

Checks if the value of the field is FDTS_DIV8_N6

Checks if the value of the field is FDTS_DIV8_N8

Checks if the value of the field is FDTS_DIV16_N5

Checks if the value of the field is FDTS_DIV16_N6

Checks if the value of the field is FDTS_DIV16_N8

Checks if the value of the field is FDTS_DIV32_N5

Checks if the value of the field is FDTS_DIV32_N6

Checks if the value of the field is FDTS_DIV32_N8

Get enumerated values variant

Checks if the value of the field is TI1

Checks if the value of the field is TI2

Checks if the value of the field is TRC

Bits 12:15 - Input capture 2 filter

Bits 10:11 - Input capture 2 prescaler

Bits 8:9 - Capture/compare 2 selection

Bits 4:7 - Input capture 1 filter

Bits 2:3 - Input capture 1 prescaler

Bits 0:1 - Capture/Compare 1 selection

Get enumerated values variant

Checks if the value of the field is FROZEN

Checks if the value of the field is ACTIVEONMATCH

Checks if the value of the field is INACTIVEONMATCH

Checks if the value of the field is TOGGLE

Checks if the value of the field is FORCEINACTIVE

Checks if the value of the field is FORCEACTIVE

Checks if the value of the field is PWMMODE1

Checks if the value of the field is PWMMODE2

Checks if the value of the field is OPMMODE1

Checks if the value of the field is OPMMODE2

Checks if the value of the field is COMBINEDPWMMODE1

Checks if the value of the field is COMBINEDPWMMODE2

Checks if the value of the field is ASYMMETRICPWMMODE1

Checks if the value of the field is ASYMMETRICPWMMODE2

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Get enumerated values variant

Checks if the value of the field is DISABLED

Checks if the value of the field is ENABLED

Get enumerated values variant

Checks if the value of the field is OUTPUT

Bit 15 - Output compare 4 clear enable

Bits 12:14 - Output compare 4 mode

Bit 11 - Output compare 4 preload enable

Bit 10 - Output compare 4 fast enable

Bits 8:9 - Capture/Compare 4 selection

Bit 7 - Output compare 3 clear enable

Bits 4:6 - Output compare 3 mode

Bit 3 - Output compare 3 preload enable

Bit 2 - Output compare 3 fast enable

Bits 0:1 - Capture/Compare 3 selection

Get enumerated values variant

Checks if the value of the field is TI4

Checks if the value of the field is TI3

Checks if the value of the field is TRC

Get enumerated values variant

Checks if the value of the field is TI3

Checks if the value of the field is TI4

Checks if the value of the field is TRC

Bits 12:15 - Input capture 4 filter

Bits 10:11 - Input capture 4 prescaler

Bits 8:9 - Capture/Compare 4 selection

Bits 4:7 - Input capture 3 filter

Bits 2:3 - Input capture 3 prescaler

Bits 0:1 - Capture/Compare 3 selection

Bit 15 - Capture/Compare 4 output Polarity

Bit 13 - Capture/Compare 3 output Polarity

Bit 12 - Capture/Compare 4 output enable

Bit 11 - Capture/Compare 3 output Polarity

Bit 9 - Capture/Compare 3 output Polarity

Bit 8 - Capture/Compare 3 output enable

Bit 7 - Capture/Compare 2 output Polarity

Bit 5 - Capture/Compare 2 output Polarity

Bit 4 - Capture/Compare 2 output enable

Bit 3 - Capture/Compare 1 output Polarity

Bit 1 - Capture/Compare 1 output Polarity

Bit 0 - Capture/Compare 1 output enable

Bits 16:31 - High counter value (TIM2 only)

Bits 0:15 - Counter value

Bits 0:15 - Prescaler value

Bits 16:31 - High Auto-reload value (TIM2 only)

Bits 0:15 - Auto-reload value

Bits 16:31 - High Capture/Compare 1 value (TIM2 only)

Bits 0:15 - Capture/Compare 1 value

Bits 8:12 - DMA burst length

Bits 0:4 - DMA base address

Bits 0:15 - DMA register for burst accesses

Bits 0:2 - Timer2 ETR remap

Bits 3:4 - Internal trigger

Trait Implementations

This method tests for self and other values to be equal, and is used by ==. Read more

This method tests for !=.

Auto Trait Implementations

Blanket Implementations

Gets the TypeId of self. Read more

Immutably borrows from an owned value. Read more

Mutably borrows from an owned value. Read more

Performs the conversion.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.

The type returned in the event of a conversion error.

Performs the conversion.