[−][src]Struct stm32f1xx_hal::gpio::gpiob::PB12
Pin
Methods
impl<MODE> PB12<MODE> where
MODE: Active, [src]
MODE: Active,
pub fn into_alternate_push_pull(self, cr: &mut CRH) -> PB12<Alternate<PushPull>>[src]
Configures the pin to operate as an alternate function push-pull output pin.
pub fn into_alternate_open_drain(
self,
cr: &mut CRH
) -> PB12<Alternate<OpenDrain>>[src]
self,
cr: &mut CRH
) -> PB12<Alternate<OpenDrain>>
Configures the pin to operate as an alternate function open-drain output pin.
pub fn into_floating_input(self, cr: &mut CRH) -> PB12<Input<Floating>>[src]
Configures the pin to operate as a floating input pin
pub fn into_pull_down_input(self, cr: &mut CRH) -> PB12<Input<PullDown>>[src]
Configures the pin to operate as a pulled down input pin
pub fn into_pull_up_input(self, cr: &mut CRH) -> PB12<Input<PullUp>>[src]
Configures the pin to operate as a pulled up input pin
pub fn into_open_drain_output(self, cr: &mut CRH) -> PB12<Output<OpenDrain>>[src]
Configures the pin to operate as an open-drain output pin. Initial state will be low.
pub fn into_open_drain_output_with_state(
self,
cr: &mut CRH,
initial_state: State
) -> PB12<Output<OpenDrain>>[src]
self,
cr: &mut CRH,
initial_state: State
) -> PB12<Output<OpenDrain>>
Configures the pin to operate as an open-drain output pin.
initial_state specifies whether the pin should be initially high or low.
pub fn into_push_pull_output(self, cr: &mut CRH) -> PB12<Output<PushPull>>[src]
Configures the pin to operate as an push-pull output pin. Initial state will be low.
pub fn into_push_pull_output_with_state(
self,
cr: &mut CRH,
initial_state: State
) -> PB12<Output<PushPull>>[src]
self,
cr: &mut CRH,
initial_state: State
) -> PB12<Output<PushPull>>
Configures the pin to operate as an push-pull output pin.
initial_state specifies whether the pin should be initially high or low.
pub fn into_analog(self, cr: &mut CRH) -> PB12<Analog>[src]
Configures the pin to operate as an analog input pin
impl<MODE> PB12<MODE> where
MODE: Active, [src]
MODE: Active,
pub fn downgrade(self) -> PBx<MODE>[src]
Erases the pin number from the type
This is useful when you want to collect the pins into an array where you need all the elements to have the same type
Trait Implementations
impl<MODE> OutputPin for PB12<Output<MODE>>[src]
type Error = Void
Error type
fn set_high(&mut self) -> Result<(), Self::Error>[src]
fn set_low(&mut self) -> Result<(), Self::Error>[src]
impl<MODE> OutputPin for PB12<Alternate<MODE>>[src]
type Error = Void
Error type
fn set_high(&mut self) -> Result<(), Self::Error>[src]
fn set_low(&mut self) -> Result<(), Self::Error>[src]
impl<MODE> StatefulOutputPin for PB12<Output<MODE>>[src]
fn is_set_high(&self) -> Result<bool, Self::Error>[src]
fn is_set_low(&self) -> Result<bool, Self::Error>[src]
impl<MODE> StatefulOutputPin for PB12<Alternate<MODE>>[src]
fn is_set_high(&self) -> Result<bool, Self::Error>[src]
fn is_set_low(&self) -> Result<bool, Self::Error>[src]
impl<MODE> Default for PB12<Output<MODE>>[src]
impl<MODE> InputPin for PB12<Input<MODE>>[src]
type Error = Void
Error type
fn is_high(&self) -> Result<bool, Self::Error>[src]
fn is_low(&self) -> Result<bool, Self::Error>[src]
impl InputPin for PB12<Output<OpenDrain>>[src]
Auto Trait Implementations
impl<MODE> Unpin for PB12<MODE> where
MODE: Unpin,
MODE: Unpin,
impl<MODE> Sync for PB12<MODE> where
MODE: Sync,
MODE: Sync,
impl<MODE> Send for PB12<MODE> where
MODE: Send,
MODE: Send,
Blanket Implementations
impl<T, U> TryFrom<U> for T where
U: Into<T>, [src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
impl<T, U> Into<U> for T where
U: From<T>, [src]
U: From<T>,
impl<T> From<T> for T[src]
impl<T, U> TryInto<U> for T where
U: TryFrom<T>, [src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]
impl<T> Borrow<T> for T where
T: ?Sized, [src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized, [src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T[src]
impl<T> Any for T where
T: 'static + ?Sized, [src]
T: 'static + ?Sized,
impl<T> OutputPin for T where
T: OutputPin, [src]
T: OutputPin,
type Error = ()
Error type
fn set_low(&mut self) -> Result<(), <T as OutputPin>::Error>[src]
fn set_high(&mut self) -> Result<(), <T as OutputPin>::Error>[src]
impl<T> StatefulOutputPin for T where
T: StatefulOutputPin + OutputPin, [src]
T: StatefulOutputPin + OutputPin,
fn is_set_low(&self) -> Result<bool, <T as OutputPin>::Error>[src]
fn is_set_high(&self) -> Result<bool, <T as OutputPin>::Error>[src]
impl<P> ToggleableOutputPin for P where
P: Default, [src]
P: Default,
type Error = <P as OutputPin>::Error
Error type
fn toggle(&mut self) -> Result<(), <P as ToggleableOutputPin>::Error>[src]
Toggle pin output
impl<T> InputPin for T where
T: InputPin, [src]
T: InputPin,
type Error = ()
Error type
fn is_low(&self) -> Result<bool, <T as InputPin>::Error>[src]
fn is_high(&self) -> Result<bool, <T as InputPin>::Error>[src]
impl<T> Same<T> for T
type Output = T
Should always be Self