Crate seize

source ·
Expand description

§Seize

Crate Github Docs

Fast, efficient, and robust memory reclamation for concurrent data structures.

§Introduction

Concurrent data structures are faced with the problem of deciding when it is safe to free memory. Although an object might have been logically removed, other threads that previously loaded it may still be accessing it, and thus it is not safe to free immediately. Over the years, many algorithms have been devised to solve this problem. However, most traditional memory reclamation schemes make the tradeoff between performance, efficiency, and robustness. For example, epoch based reclamation is fast and lightweight but lacks robustness in that a stalled thread can prevent the reclamation of all retired objects. Hazard pointers, another popular scheme, tracks individual pointers, making it efficient and robust but generally much slower.

Another problem that is often not considered is workload balancing. In most reclamation schemes, the thread that retires an object is the one that reclaims it. This leads to unbalanced reclamation in read-dominated workloads; parallelism is degraded when only a fraction of threads are writing. This is especially prevalent with the use of M:N threading models as provided by asynchronous runtimes like Tokio.

§Details

Seize is based on the hyaline reclamation scheme, which uses reference counting to determine when it is safe to free memory. However, reference counters are only used for objects that have been retired, allowing it to avoid the high overhead incurred by traditional reference counting schemes where every memory access requires modifying shared memory. Performance is competitive with that of epoch based schemes, while memory efficiency is similar to hazard pointers. Reclamation is naturally balanced as the thread with the last reference to an object is the one that frees it. Epochs can also be optionally tracked to protect against stalled threads, making reclamation truly lock-free.

Seize is compatible with all modern hardware that supports single-word atomic operations such as FAA and CAS.

§Guide

Seize tries to stay out of your way as much as possible. It works with raw pointers directly instead of creating safe wrapper types that end up being a hassle to work with in practice. Below is a step-by-step guide on how to get started.

§Collectors

Seize avoids the use of global state and encourages creating a designated collector per data structure. Collectors allow you to allocate, protect, and retire objects:

use seize::Collector;

struct Stack<T> {
    collector: Collector,
    // ...
}

impl<T> Stack<T> {
    pub fn new() -> Self {
        Self {
            collector: Collector::new(),
        }
    }
}

§Allocating Objects

Seize requires storing some metadata about the global epoch for each object that is allocated. It also needs to reserve a couple words for retirement lists. Because of this, objects in a concurrent data structure that may be reclaimed must embed the Link type or use the Linked<T> wrapper provided for convenience. See DST Support for more details.

You can create a Link with the link method, or allocate and link a value with the link_boxed helper:

use seize::{reclaim, Collector, Linked};
use std::mem::ManuallyDrop;
use std::sync::atomic::{AtomicPtr, Ordering};

pub struct Stack<T> {
    head: AtomicPtr<Linked<Node<T>>>, // <===
    collector: Collector,
}

struct Node<T> {
    next: *mut Linked<Node<T>>, // <===
    value: ManuallyDrop<T>,
}

impl<T> Stack<T> {
    pub fn push(&self, value: T) {
        let node = self.collector.link_boxed(Node { // <===
            next: std::ptr::null_mut(),
            value: ManuallyDrop::new(value),
        });

        // ...
    }
}

§Starting Operations

Before starting an operation that involves loading atomic pointers, you must mark the thread as active by calling the enter method.

impl Stack {
    pub fn push(&self, value: T) {
        // ...

        let guard = self.collector.enter(); // <===

        // ...
    }
}

§Protecting Pointers

enter returns a guard that allows you to safely load atomic pointers. Any valid pointer loaded through a guard is guaranteed to stay valid until the guard is dropped, or is retired by the current thread. Importantly, if another thread retires an object that you protected, the collector knows not to reclaim the object until your guard is dropped.

impl Stack {
    pub fn push(&self, value: T) {
        // ...

        let guard = self.collector.enter();

        loop {
            let head = guard.protect(&self.head, Ordering::Acquire); // <===
            unsafe { (*node).next = head; }

            if self
                .head
                .compare_exchange(head, node, Ordering::Release, Ordering::Relaxed)
                .is_ok()
            {
                break;
            }
        }

        // drop(guard);
    }
}

Note that the lifetime of a guarded pointer is logically tied to that of the guard – when the guard is dropped the pointer is invalidated – but a raw pointer is returned for convenience. Datastructures that return shared references to values should ensure that the lifetime of the reference is tied to the lifetime of a guard.

§Retiring Objects

Objects that have been removed from a data structure can be safely retired through the collector. It will be reclaimed when no threads holds a reference to it:

impl<T> Stack<T> {
    pub fn pop(&self) -> Option<T> {
        let guard = self.collector.enter(); // <=== mark the thread as active

        loop {
            let head = guard.protect(&self.head, Ordering::Acquire); // <=== safely load the head

            if head.is_null() {
                return None;
            }

            let next = unsafe { (*head).next };

            if self
                .head
                .compare_exchange(head, next, Ordering::Release, Ordering::Relaxed)
                .is_ok()
            {
                unsafe {
                    let data = ptr::read(&(*head).value);
                    self.collector.retire(head, reclaim::boxed::<Linked<Node<T>>>); // <===
                    return Some(ManuallyDrop::into_inner(data));
                }
            }
        }
    }
}

There are a couple important things to note about retiring an object:

§Retired objects must be logically removed

An object can only be retired if it is no longer accessible to any thread that comes after. In the above code example this was ensured by swapping out the node before retiring it. Threads that loaded a value before it was retired are safe, but threads that come after are not.

§Retired objects cannot be accessed by the current thread

Unlike in schemes like EBR, a guard does not protect objects retired by the current thread. If no other thread holds a reference to an object it may be reclaimed immediately. This makes the following code unsound:

let ptr = guard.protect(&node, Ordering::Acquire);
collector.retire(ptr, |_| {});
println!("{}", (*ptr).value); // <===== unsound!

Retirement can be delayed until the guard is dropped by calling defer_retire on the guard, instead of on the collector directly:

let ptr = guard.protect(&node, Ordering::Acquire);
guard.defer_retire(ptr, |_| {});
println!("{}", (*ptr).value); // <===== ok!
drop(guard); // <===== ptr is invalidated
§Custom Reclaimers

You probably noticed that retire takes a function as a second parameter. This function is known as a reclaimer, and is run when the collector decides it is safe to free the retired object. Typically you will pass in a function from the seize::reclaim module. For example, values allocated with Box can use reclaim::boxed:

use seize::reclaim;

impl<T> Stack<T> {
    pub fn pop(&self) -> Option<T> {
        // ...
        self.collector.retire(head, reclaim::boxed::<Linked<Node<T>>); // <===
        // ...
    }
}

The type annotation there is important. It is unsound to pass a reclaimer of a different type than the object being retired.

If you need to run custom reclamation code, you can write a custom reclaimer. Functions passed to retire are called with a type-erased Link pointer. This is because retired values are connected to thread-local batches via linked lists, losing any type information. To extract the underlying value from a link, you can call the cast method:

collector.retire(value, |link: *mut Link| unsafe {
    // SAFETY: the value retired was of type *mut Linked<T>
    let ptr: *mut Linked<T> = Link::cast(link);

    // SAFETY: the value was allocated with `link_boxed`
    let value = Box::from_raw(ptr);
    println!("dropping {}", value);
    drop(value);
});

§DST Support

Most reclamation use cases can work with Linked<T> and avoid working with links directly. However, advanced use cases such as dynamically sized types may requie more control over type layout. To support this, seize allows embedding a Link directly in your type. See the AsLink trait for more details.

Modules§

Structs§

  • Fast, efficient, and robust memory reclamation.
  • A guard that keeps the current thread marked as active, enabling protected loads of atomic pointers.
  • A link to the collector.
  • A value linked to a collector.

Traits§

  • A type that can be pointer-cast to and from a Link.