Trait PartialEq

1.0.0 (const: unstable) · Source

pub trait PartialEq<Rhs = Self>where
    Rhs: ?Sized,{
    // Required method
    fn eq(&self, other: &Rhs) -> bool;

    // Provided method
    fn ne(&self, other: &Rhs) -> bool { ... }
}

Expand description

Trait for comparisons using the equality operator.

Implementing this trait for types provides the == and != operators for those types.

x.eq(y) can also be written x == y, and x.ne(y) can be written x != y. We use the easier-to-read infix notation in the remainder of this documentation.

This trait allows for comparisons using the equality operator, for types that do not have a full equivalence relation. For example, in floating point numbers NaN != NaN, so floating point types implement PartialEq but not Eq. Formally speaking, when Rhs == Self, this trait corresponds to a partial equivalence relation.

Implementations must ensure that eq and ne are consistent with each other:

a != b if and only if !(a == b).

The default implementation of ne provides this consistency and is almost always sufficient. It should not be overridden without very good reason.

If PartialOrd or Ord are also implemented for Self and Rhs, their methods must also be consistent with PartialEq (see the documentation of those traits for the exact requirements). It’s easy to accidentally make them disagree by deriving some of the traits and manually implementing others.

The equality relation == must satisfy the following conditions (for all a, b, c of type A, B, C):

Symmetry: if A: PartialEq and B: PartialEq<A>, then a == b implies b == a; and
Transitivity: if A: PartialEq and B: PartialEq<C> and A: PartialEq<C>, then a == b and b == c implies a == c. This must also work for longer chains, such as when A: PartialEq, B: PartialEq<C>, C: PartialEq<D>, and A: PartialEq<D> all exist.

Note that the B: PartialEq<A> (symmetric) and A: PartialEq<C> (transitive) impls are not forced to exist, but these requirements apply whenever they do exist.

Violating these requirements is a logic error. The behavior resulting from a logic error is not specified, but users of the trait must ensure that such logic errors do not result in undefined behavior. This means that unsafe code must not rely on the correctness of these methods.

§Cross-crate considerations

Upholding the requirements stated above can become tricky when one crate implements PartialEq for a type of another crate (i.e., to allow comparing one of its own types with a type from the standard library). The recommendation is to never implement this trait for a foreign type. In other words, such a crate should do impl PartialEq<ForeignType> for LocalType, but it should not do impl PartialEq<LocalType> for ForeignType.

This avoids the problem of transitive chains that criss-cross crate boundaries: for all local types T, you may assume that no other crate will add impls that allow comparing T == U. In other words, if other crates add impls that allow building longer transitive chains U1 == ... == T == V1 == ..., then all the types that appear to the right of T must be types that the crate defining T already knows about. This rules out transitive chains where downstream crates can add new impls that “stitch together” comparisons of foreign types in ways that violate transitivity.

Not having such foreign impls also avoids forward compatibility issues where one crate adding more PartialEq implementations can cause build failures in downstream crates.

§Derivable

This trait can be used with #[derive]. When derived on structs, two instances are equal if all fields are equal, and not equal if any fields are not equal. When derived on enums, two instances are equal if they are the same variant and all fields are equal.

§How can I implement `PartialEq`?

An example implementation for a domain in which two books are considered the same book if their ISBN matches, even if the formats differ:

enum BookFormat {
    Paperback,
    Hardback,
    Ebook,
}

struct Book {
    isbn: i32,
    format: BookFormat,
}

impl PartialEq for Book {
    fn eq(&self, other: &Self) -> bool {
        self.isbn == other.isbn
    }
}

let b1 = Book { isbn: 3, format: BookFormat::Paperback };
let b2 = Book { isbn: 3, format: BookFormat::Ebook };
let b3 = Book { isbn: 10, format: BookFormat::Paperback };

assert!(b1 == b2);
assert!(b1 != b3);

§How can I compare two different types?

The type you can compare with is controlled by PartialEq’s type parameter. For example, let’s tweak our previous code a bit:

// The derive implements <BookFormat> == <BookFormat> comparisons
#[derive(PartialEq)]
enum BookFormat {
    Paperback,
    Hardback,
    Ebook,
}

struct Book {
    isbn: i32,
    format: BookFormat,
}

// Implement <Book> == <BookFormat> comparisons
impl PartialEq<BookFormat> for Book {
    fn eq(&self, other: &BookFormat) -> bool {
        self.format == *other
    }
}

// Implement <BookFormat> == <Book> comparisons
impl PartialEq<Book> for BookFormat {
    fn eq(&self, other: &Book) -> bool {
        *self == other.format
    }
}

let b1 = Book { isbn: 3, format: BookFormat::Paperback };

assert!(b1 == BookFormat::Paperback);
assert!(BookFormat::Ebook != b1);

By changing impl PartialEq for Book to impl PartialEq<BookFormat> for Book, we allow BookFormats to be compared with Books.

A comparison like the one above, which ignores some fields of the struct, can be dangerous. It can easily lead to an unintended violation of the requirements for a partial equivalence relation. For example, if we kept the above implementation of PartialEq<Book> for BookFormat and added an implementation of PartialEq<Book> for Book (either via a #[derive] or via the manual implementation from the first example) then the result would violate transitivity:

#[derive(PartialEq)]
enum BookFormat {
    Paperback,
    Hardback,
    Ebook,
}

#[derive(PartialEq)]
struct Book {
    isbn: i32,
    format: BookFormat,
}

impl PartialEq<BookFormat> for Book {
    fn eq(&self, other: &BookFormat) -> bool {
        self.format == *other
    }
}

impl PartialEq<Book> for BookFormat {
    fn eq(&self, other: &Book) -> bool {
        *self == other.format
    }
}

fn main() {
    let b1 = Book { isbn: 1, format: BookFormat::Paperback };
    let b2 = Book { isbn: 2, format: BookFormat::Paperback };

    assert!(b1 == BookFormat::Paperback);
    assert!(BookFormat::Paperback == b2);

    // The following should hold by transitivity but doesn't.
    assert!(b1 == b2); // <-- PANICS
}

§Examples

let x: u32 = 0;
let y: u32 = 1;

assert_eq!(x == y, false);
assert_eq!(x.eq(&y), false);

Required Methods§

1.0.0 · Source

fn eq(&self, other: &Rhs) -> bool

Tests for self and other values to be equal, and is used by ==.

Provided Methods§

1.0.0 · Source

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

PartialEq

Trait PartialEq Copy item path

§Cross-crate considerations

§Derivable

§How can I implement PartialEq?

§How can I compare two different types?

§Examples

Required Methods§

fn eq(&self, other: &Rhs) -> bool

Provided Methods§

fn ne(&self, other: &Rhs) -> bool

Implementors§

impl PartialEq for CreationStrategy

impl PartialEq for AbortReason

impl PartialEq for AccessControllerError

impl PartialEq for AccessControllerPartitionOffset

impl PartialEq for AccessRule

impl PartialEq for AccountLockerPartitionOffset

impl PartialEq for AccountPartitionOffset

impl PartialEq for Actor

impl PartialEq for AddressBech32DecodeError

impl PartialEq for AddressBech32EncodeError

impl PartialEq for AlignerExecutionMode

impl PartialEq for AlignerFolderMode

impl PartialEq for AllowedIds

impl PartialEq for AlwaysVisibleGlobalNodesVersion

impl PartialEq for AnyTransaction

impl PartialEq for ApplicationError

impl PartialEq for AttachedModuleId

impl PartialEq for AuthError

impl PartialEq for AuthZoneError

impl PartialEq for AuthZoneField

impl PartialEq for BalanceChange

impl PartialEq for BasicRequirement

impl PartialEq for BatchPartitionStateUpdate

impl PartialEq for BlueprintPartitionType

impl PartialEq for BlueprintPayloadDef

impl PartialEq for BlueprintPayloadIdentifier

impl PartialEq for BlueprintType

impl PartialEq for BootLoaderField

impl PartialEq for BootloadingError

impl PartialEq for BucketError

impl PartialEq for BucketSnapshot

impl PartialEq for CallFrameDrainSubstatesError

impl PartialEq for CallFrameError

impl PartialEq for CallFrameRemoveSubstateError

impl PartialEq for CallFrameScanKeysError

impl PartialEq for CallFrameScanSortedSubstatesError

impl PartialEq for CallFrameSetSubstateError

impl PartialEq for CannotGlobalizeError

impl PartialEq for ChildNames

impl PartialEq for CloseSubstateError

impl PartialEq for ComponentField

impl PartialEq for ComponentRoyaltyPartitionOffset

impl PartialEq for ComposeProofError

impl PartialEq for CompositeRequirement

impl PartialEq for ConsensusManagerCollection

impl PartialEq for ConsensusManagerConfigurationVersions

impl PartialEq for ConsensusManagerCurrentProposalStatisticVersions

impl PartialEq for ConsensusManagerCurrentValidatorSetVersions

impl PartialEq for ConsensusManagerError

impl PartialEq for ConsensusManagerFeature

impl PartialEq for ConsensusManagerField

impl PartialEq for ConsensusManagerPartitionOffset

impl PartialEq for ConsensusManagerProposerMilliTimestampVersions

impl PartialEq for ConsensusManagerProposerMinuteTimestampVersions

impl PartialEq for ConsensusManagerRegisteredValidatorByStakeVersions

impl PartialEq for ConsensusManagerStateVersions

impl PartialEq for ConsensusManagerValidatorRewardsVersions

impl PartialEq for ContentValidationError

impl PartialEq for CostingError

impl PartialEq for CreateFrameError

impl PartialEq for CreateNodeError

impl PartialEq for CreateObjectError

impl PartialEq for CurveType

impl PartialEq for DatabaseUpdate

impl PartialEq for DateTimeError

impl PartialEq for DecodeError

impl PartialEq for DecryptorsByCurve

impl PartialEq for DecryptorsByCurveV2

Trait PartialEq

§How can I implement `PartialEq`?