Skip to main content

PricingNoteCode

Enum PricingNoteCode 

Source
#[non_exhaustive]
pub enum PricingNoteCode { NoPriceComponent, PeriodSpansPriceChange, PeriodsOutOfOrder, TotalClamped, NegativeTax, UnattributedTax, }
Available on crate feature tariffs only.
Expand description

What a PricingNote is about, without reading the English.

An invoice-reconciliation pipeline has to be able to count these — how many CDRs this month span a price change? — and grepping a sentence is not a way to do that.

Variants (Non-exhaustive)§

This enum is marked as non-exhaustive
Non-exhaustive enums could have additional variants added in future. Therefore, when matching against variants of non-exhaustive enums, an extra wildcard arm must be added to account for any future variants.
§

NoPriceComponent

A dimension was consumed that no Tariff Element prices.

Not an error: “there will be no costs for that Tariff Dimension”. But a session that charged 40 kWh for nothing is worth looking at.

§

PeriodSpansPriceChange

A Charging Period outlasted the Price Component that priced it.

A CPO SHALL at least start (and add) a ChargingPeriod every moment/event that has relevance for the total costs of a CDR. … When an energy changes in price after 17:00, the CPO has to start a new Charging Period at 17:00.

So this is a defect in the CDR, not in the tariff: the period should have been split. Its quantities cannot be apportioned after the fact — nothing in the data says how much of the energy fell either side of the boundary — so the period is priced at the rate that applied when it began, and this note says that happened. See PricingEngine.

§

PeriodsOutOfOrder

The Charging Periods are not in chronological order.

Nothing in the property tables says they must be, but everything built on them assumes it: step_size is defined in terms of “the last relevant PriceComponent”, and a period’s duration is only knowable as the gap to the next one. Out of order, both are wrong.

The session is still priced — the quantities are all there — but any restriction that depends on elapsed time is evaluated against a timeline that does not exist.

§

TotalClamped

A min_price or max_price moved the total, and the tax lines were moved with it.

§

NegativeTax

The tax the tariff describes came out negative.

No tariff can mean that: a VAT percentage below zero is a malformed PriceComponent, which Validate reports. The engine does not require validated input, so rather than publish a session that costs less with tax than without, it holds the inclusive total at the exclusive one and says why.

§

UnattributedTax

Tax was owed that no rate in the session accounts for.

Raised when a min_price.after_taxes lifts the inclusive total of a session whose price components named no VAT at all. The amount is real; the rate is not knowable.

Implementations§

Source§

impl PricingNoteCode

Source

pub const fn as_str(self) -> &'static str

A short, stable, machine-readable slug.

Trait Implementations§

Source§

impl Clone for PricingNoteCode

Source§

fn clone(&self) -> PricingNoteCode

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Copy for PricingNoteCode

Source§

impl Debug for PricingNoteCode

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl<'de> Deserialize<'de> for PricingNoteCode

Source§

fn deserialize<__D>(__deserializer: __D) -> Result<Self, __D::Error>
where __D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
Source§

impl Display for PricingNoteCode

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Eq for PricingNoteCode

Source§

impl Hash for PricingNoteCode

Source§

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher. Read more
1.3.0 · Source§

fn hash_slice<H>(data: &[Self], state: &mut H)
where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher. Read more
Source§

impl PartialEq for PricingNoteCode

Source§

fn eq(&self, other: &PricingNoteCode) -> bool

Equality operator ==. Read more
1.0.0 (const: unstable) · Source§

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=. Read more
Source§

impl Serialize for PricingNoteCode

Source§

fn serialize<__S>(&self, __serializer: __S) -> Result<__S::Ok, __S::Error>
where __S: Serializer,

Serialize this value into the given Serde serializer. Read more
Source§

impl StructuralPartialEq for PricingNoteCode

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,

Source§

impl<T> DynClone for T
where T: Clone,

Source§

fn __clone_box(&self, _: Private) -> *mut ()

Source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

Source§

fn equivalent(&self, key: &K) -> bool

Checks if this value is equivalent to the given key. Read more
Source§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

Source§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> FromRef<T> for T
where T: Clone,

Source§

fn from_ref(input: &T) -> T

Converts to this type from a reference to the input type.
Source§

impl<T> Instrument for T

Source§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided Span, returning an Instrumented wrapper. Read more
Source§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> PolicyExt for T
where T: ?Sized,

Source§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns Action::Follow only if self and other return Action::Follow. Read more
Source§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns Action::Follow if either self or other returns Action::Follow. Read more
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T> ToString for T
where T: Display + ?Sized,

Source§

fn to_string(&self) -> String

Converts the given value to a String. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = !

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
Source§

impl<T> WithSubscriber for T

Source§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a WithDispatch wrapper. Read more
Source§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a WithDispatch wrapper. Read more