Struct nrf52820_pac::generic::R [−][src]
pub struct R<U, T> { /* fields omitted */ }
Expand description
Implementations
Returns true
if the bit is clear (0)
Returns true
if the bit is set (1)
Checks if the value of the field is UNSPECIFIED
Checks if the value of the field is UNSPECIFIED
Checks if the value of the field is UNSPECIFIED
Checks if the value of the field is UNSPECIFIED
Bits 0:31 - Code memory page size
Bits 0:31 - Code memory size in number of pages
Bits 0:31 - 64 bit unique device identifier
Bit 0 - Device address type
Bits 0:31 - 48 bit device address
Get enumerated values variant
Checks if the value of the field is NOTDONE
Bits 0:31 - Production test signature n
Bits 0:31 - Reserved for customer
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISABLED
Checks if the value of the field is HWDISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Bits 8:15 - Configure CPU flash patch and breakpoint (FPB) unit behavior
Checks if the value of the field is DEFAULT
Bits 0:7 - Write 0x0 to force enable APPROTECT mechanism
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - HFXO crystal oscillator started
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - LFCLK started
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Calibration of LFRC completed
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Calibration timer timeout
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Calibration timer has been started and is ready to process new tasks
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Calibration timer has been stopped and is ready to process new tasks
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Write ‘1’ to enable interrupt for event HFCLKSTARTED
Bit 1 - Write ‘1’ to enable interrupt for event LFCLKSTARTED
Bit 10 - Write ‘1’ to enable interrupt for event CTSTARTED
Bit 11 - Write ‘1’ to enable interrupt for event CTSTOPPED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Write ‘1’ to disable interrupt for event HFCLKSTARTED
Bit 1 - Write ‘1’ to disable interrupt for event LFCLKSTARTED
Bit 10 - Write ‘1’ to disable interrupt for event CTSTARTED
Bit 11 - Write ‘1’ to disable interrupt for event CTSTOPPED
Checks if the value of the field is NOTTRIGGERED
Checks if the value of the field is TRIGGERED
Checks if the value of the field is NOTRUNNING
Checks if the value of the field is RUNNING
Checks if the value of the field is NOTTRIGGERED
Checks if the value of the field is TRIGGERED
Checks if the value of the field is NOTRUNNING
Checks if the value of the field is RUNNING
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DB256US
Checks if the value of the field is DB1024US
Bits 0:7 - HFXO debounce time. Debounce time = HFXODEBOUNCE * 16 us.
Get enumerated values variant
Checks if the value of the field is EXTENDED
Bit 0 - LFXO debounce time.
Bit 16 - Keep retention on RAM section S0 when RAM section is off
Bit 17 - Keep retention on RAM section S1 when RAM section is off
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Power failure warning
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - CPU entered WFI/WFE sleep
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - CPU exited WFI/WFE sleep
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Voltage supply detected on VBUS
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Voltage supply removed from VBUS
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - USB 3.3 V supply ready
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 5 - Write ‘1’ to enable interrupt for event SLEEPENTER
Bit 6 - Write ‘1’ to enable interrupt for event SLEEPEXIT
Bit 7 - Write ‘1’ to enable interrupt for event USBDETECTED
Bit 8 - Write ‘1’ to enable interrupt for event USBREMOVED
Bit 9 - Write ‘1’ to enable interrupt for event USBPWRRDY
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 5 - Write ‘1’ to disable interrupt for event SLEEPENTER
Bit 6 - Write ‘1’ to disable interrupt for event SLEEPEXIT
Bit 7 - Write ‘1’ to disable interrupt for event USBDETECTED
Bit 8 - Write ‘1’ to disable interrupt for event USBREMOVED
Bit 9 - Write ‘1’ to disable interrupt for event USBPWRRDY
Get enumerated values variant
Checks if the value of the field is NOTDETECTED
Checks if the value of the field is DETECTED
Checks if the value of the field is NOTDETECTED
Checks if the value of the field is DETECTED
Checks if the value of the field is NOTDETECTED
Checks if the value of the field is DETECTED
Checks if the value of the field is NOTDETECTED
Checks if the value of the field is DETECTED
Checks if the value of the field is NOTDETECTED
Checks if the value of the field is DETECTED
Checks if the value of the field is NOTDETECTED
Checks if the value of the field is DETECTED
Checks if the value of the field is NOTDETECTED
Checks if the value of the field is DETECTED
Bit 0 - Reset from pin-reset detected
Bit 16 - Reset due to wake up from System OFF mode when wakeup is triggered from DETECT signal from GPIO
Bit 18 - Reset due to wake up from System OFF mode when wakeup is triggered from entering into debug interface mode
Bit 0 - RAM block 0 is on or off/powering up
Bit 1 - RAM block 1 is on or off/powering up
Get enumerated values variant
Checks if the value of the field is NOVBUS
Checks if the value of the field is VBUSPRESENT
Get enumerated values variant
Checks if the value of the field is NOTREADY
Bit 0 - VBUS input detection status (USBDETECTED and USBREMOVED events are derived from this information)
Bit 1 - USB supply output settling time elapsed
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Get enumerated values variant
Bits 1:4 - Power-fail comparator threshold setting. This setting applies both for normal voltage mode (supply connected to both VDD and VDDH) and high voltage mode (supply connected to VDDH only). Values 0-3 set threshold below 1.7 V and should not be used as brown out detection will be activated before power failure warning on such low voltages.
Bits 8:11 - Power-fail comparator threshold setting for high voltage mode (supply connected to VDDH only). This setting does not apply for normal voltage mode (supply connected to both VDD and VDDH).
Bits 0:7 - General purpose retention register
Bits 0:7 - General purpose retention register
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Main supply status
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Checks if the value of the field is NOTLATCHED
Checks if the value of the field is LATCHED
Bit 0 - Status on whether PIN0 has met criteria set in PIN_CNF0.SENSE register. Write ‘1’ to clear.
Bit 1 - Status on whether PIN1 has met criteria set in PIN_CNF1.SENSE register. Write ‘1’ to clear.
Bit 2 - Status on whether PIN2 has met criteria set in PIN_CNF2.SENSE register. Write ‘1’ to clear.
Bit 3 - Status on whether PIN3 has met criteria set in PIN_CNF3.SENSE register. Write ‘1’ to clear.
Bit 4 - Status on whether PIN4 has met criteria set in PIN_CNF4.SENSE register. Write ‘1’ to clear.
Bit 5 - Status on whether PIN5 has met criteria set in PIN_CNF5.SENSE register. Write ‘1’ to clear.
Bit 6 - Status on whether PIN6 has met criteria set in PIN_CNF6.SENSE register. Write ‘1’ to clear.
Bit 7 - Status on whether PIN7 has met criteria set in PIN_CNF7.SENSE register. Write ‘1’ to clear.
Bit 8 - Status on whether PIN8 has met criteria set in PIN_CNF8.SENSE register. Write ‘1’ to clear.
Bit 9 - Status on whether PIN9 has met criteria set in PIN_CNF9.SENSE register. Write ‘1’ to clear.
Bit 10 - Status on whether PIN10 has met criteria set in PIN_CNF10.SENSE register. Write ‘1’ to clear.
Bit 11 - Status on whether PIN11 has met criteria set in PIN_CNF11.SENSE register. Write ‘1’ to clear.
Bit 12 - Status on whether PIN12 has met criteria set in PIN_CNF12.SENSE register. Write ‘1’ to clear.
Bit 13 - Status on whether PIN13 has met criteria set in PIN_CNF13.SENSE register. Write ‘1’ to clear.
Bit 14 - Status on whether PIN14 has met criteria set in PIN_CNF14.SENSE register. Write ‘1’ to clear.
Bit 15 - Status on whether PIN15 has met criteria set in PIN_CNF15.SENSE register. Write ‘1’ to clear.
Bit 16 - Status on whether PIN16 has met criteria set in PIN_CNF16.SENSE register. Write ‘1’ to clear.
Bit 17 - Status on whether PIN17 has met criteria set in PIN_CNF17.SENSE register. Write ‘1’ to clear.
Bit 18 - Status on whether PIN18 has met criteria set in PIN_CNF18.SENSE register. Write ‘1’ to clear.
Bit 19 - Status on whether PIN19 has met criteria set in PIN_CNF19.SENSE register. Write ‘1’ to clear.
Bit 20 - Status on whether PIN20 has met criteria set in PIN_CNF20.SENSE register. Write ‘1’ to clear.
Bit 21 - Status on whether PIN21 has met criteria set in PIN_CNF21.SENSE register. Write ‘1’ to clear.
Bit 22 - Status on whether PIN22 has met criteria set in PIN_CNF22.SENSE register. Write ‘1’ to clear.
Bit 23 - Status on whether PIN23 has met criteria set in PIN_CNF23.SENSE register. Write ‘1’ to clear.
Bit 24 - Status on whether PIN24 has met criteria set in PIN_CNF24.SENSE register. Write ‘1’ to clear.
Bit 25 - Status on whether PIN25 has met criteria set in PIN_CNF25.SENSE register. Write ‘1’ to clear.
Bit 26 - Status on whether PIN26 has met criteria set in PIN_CNF26.SENSE register. Write ‘1’ to clear.
Bit 27 - Status on whether PIN27 has met criteria set in PIN_CNF27.SENSE register. Write ‘1’ to clear.
Bit 28 - Status on whether PIN28 has met criteria set in PIN_CNF28.SENSE register. Write ‘1’ to clear.
Bit 29 - Status on whether PIN29 has met criteria set in PIN_CNF29.SENSE register. Write ‘1’ to clear.
Bit 30 - Status on whether PIN30 has met criteria set in PIN_CNF30.SENSE register. Write ‘1’ to clear.
Get enumerated values variant
Checks if the value of the field is DEFAULT
Checks if the value of the field is LDETECT
Bit 0 - Select between default DETECT signal behavior and LDETECT mode
Checks if the value of the field is CONNECT
Checks if the value of the field is DISCONNECT
Checks if the value of the field is DISABLED
Checks if the value of the field is PULLDOWN
Checks if the value of the field is DISABLED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - RADIO has ramped up and is ready to be started
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Address sent or received
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Packet payload sent or received
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Packet sent or received
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - RADIO has been disabled
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - A device address match occurred on the last received packet
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - No device address match occurred on the last received packet
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Sampling of receive signal strength complete
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Bit counter reached bit count value
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Packet received with CRC ok
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Packet received with CRC error
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - IEEE 802.15.4 length field received
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Sampling of energy detection complete. A new ED sample is ready for readout from the RADIO.EDSAMPLE register.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - The sampling of energy detection has stopped
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Wireless medium in idle - clear to send
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Wireless medium busy - do not send
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - The CCA has stopped
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Ble_LR CI field received, receive mode is changed from Ble_LR125Kbit to Ble_LR500Kbit.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - RADIO has ramped up and is ready to be started TX path
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - RADIO has ramped up and is ready to be started RX path
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - MAC header match found
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Preamble indicator
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Generated when last bit is sent on air, or received from air
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - CTE is present (early warning right after receiving CTEInfo byte)
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Shortcut between event READY and task START
Bit 1 - Shortcut between event END and task DISABLE
Bit 2 - Shortcut between event DISABLED and task TXEN
Bit 3 - Shortcut between event DISABLED and task RXEN
Bit 4 - Shortcut between event ADDRESS and task RSSISTART
Bit 5 - Shortcut between event END and task START
Bit 6 - Shortcut between event ADDRESS and task BCSTART
Bit 8 - Shortcut between event DISABLED and task RSSISTOP
Bit 11 - Shortcut between event RXREADY and task CCASTART
Bit 12 - Shortcut between event CCAIDLE and task TXEN
Bit 13 - Shortcut between event CCABUSY and task DISABLE
Bit 14 - Shortcut between event FRAMESTART and task BCSTART
Bit 15 - Shortcut between event READY and task EDSTART
Bit 16 - Shortcut between event EDEND and task DISABLE
Bit 17 - Shortcut between event CCAIDLE and task STOP
Bit 18 - Shortcut between event TXREADY and task START
Bit 19 - Shortcut between event RXREADY and task START
Bit 20 - Shortcut between event PHYEND and task DISABLE
Bit 21 - Shortcut between event PHYEND and task START
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 4 - Write ‘1’ to enable interrupt for event DISABLED
Bit 5 - Write ‘1’ to enable interrupt for event DEVMATCH
Bit 13 - Write ‘1’ to enable interrupt for event CRCERROR
Bit 14 - Write ‘1’ to enable interrupt for event FRAMESTART
Bit 16 - Write ‘1’ to enable interrupt for event EDSTOPPED
Bit 19 - Write ‘1’ to enable interrupt for event CCASTOPPED
Bit 20 - Write ‘1’ to enable interrupt for event RATEBOOST
Bit 23 - Write ‘1’ to enable interrupt for event MHRMATCH
Bit 28 - Write ‘1’ to enable interrupt for event CTEPRESENT
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 4 - Write ‘1’ to disable interrupt for event DISABLED
Bit 5 - Write ‘1’ to disable interrupt for event DEVMATCH
Bit 10 - Write ‘1’ to disable interrupt for event BCMATCH
Bit 13 - Write ‘1’ to disable interrupt for event CRCERROR
Bit 14 - Write ‘1’ to disable interrupt for event FRAMESTART
Bit 16 - Write ‘1’ to disable interrupt for event EDSTOPPED
Bit 17 - Write ‘1’ to disable interrupt for event CCAIDLE
Bit 18 - Write ‘1’ to disable interrupt for event CCABUSY
Bit 19 - Write ‘1’ to disable interrupt for event CCASTOPPED
Bit 20 - Write ‘1’ to disable interrupt for event RATEBOOST
Bit 21 - Write ‘1’ to disable interrupt for event TXREADY
Bit 22 - Write ‘1’ to disable interrupt for event RXREADY
Bit 23 - Write ‘1’ to disable interrupt for event MHRMATCH
Bit 28 - Write ‘1’ to disable interrupt for event CTEPRESENT
Get enumerated values variant
Checks if the value of the field is CRCERROR
Bit 0 - CRC status of packet received
Checks if the value of the field is LESSTHAN
Checks if the value of the field is GREATERTHAN
Checks if the value of the field is LR125KBIT
Checks if the value of the field is LR500KBIT
Get enumerated values variant
Checks if the value of the field is SWITCHING
Get enumerated values variant
Checks if the value of the field is SAMPLING
Bits 0:2 - Internal state of switching state machine
Bit 4 - Internal state of sampling state machine
Bits 0:31 - Packet pointer
Checks if the value of the field is POS8DBM
Checks if the value of the field is POS7DBM
Checks if the value of the field is POS6DBM
Checks if the value of the field is POS5DBM
Checks if the value of the field is POS4DBM
Checks if the value of the field is POS3DBM
Checks if the value of the field is POS2DBM
Checks if the value of the field is NEG4DBM
Checks if the value of the field is NEG8DBM
Checks if the value of the field is NEG12DBM
Checks if the value of the field is NEG16DBM
Checks if the value of the field is NEG20DBM
Checks if the value of the field is NEG30DBM
Checks if the value of the field is NEG40DBM
Checks if the value of the field is NRF_1MBIT
Checks if the value of the field is NRF_2MBIT
Checks if the value of the field is BLE_1MBIT
Checks if the value of the field is BLE_2MBIT
Checks if the value of the field is BLE_LR125KBIT
Checks if the value of the field is BLE_LR500KBIT
Checks if the value of the field is IEEE802154_250KBIT
Checks if the value of the field is AUTOMATIC
Checks if the value of the field is INCLUDE
Checks if the value of the field is _32BITZERO
Checks if the value of the field is LONGRANGE
Checks if the value of the field is EXCLUDE
Checks if the value of the field is INCLUDE
Bits 24:25 - Length of preamble on air. Decision point: TASKS_START task
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bits 0:7 - Maximum length of packet payload. If the packet payload is larger than MAXLEN, the radio will truncate the payload to MAXLEN.
Bit 24 - On-air endianness of packet, this applies to the S0, LENGTH, S1, and the PAYLOAD fields.
Bits 0:2 - Transmit address select
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Get enumerated values variant
Checks if the value of the field is INCLUDE
Checks if the value of the field is IEEE802154
Bits 0:6 - RSSI sample.
Checks if the value of the field is DISABLED
Checks if the value of the field is RXIDLE
Checks if the value of the field is RXDISABLE
Checks if the value of the field is TXIDLE
Checks if the value of the field is TXDISABLE
Bits 0:6 - Data whitening initial value. Bit 6 is hardwired to ‘1’, writing ‘0’ to it has no effect, and it will always be read back and used by the device as ‘1’.
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Enable or disable device address matching using device address 0
Bit 1 - Enable or disable device address matching using device address 1
Bit 2 - Enable or disable device address matching using device address 2
Bit 3 - Enable or disable device address matching using device address 3
Bit 4 - Enable or disable device address matching using device address 4
Bit 5 - Enable or disable device address matching using device address 5
Bit 6 - Enable or disable device address matching using device address 6
Bit 7 - Enable or disable device address matching using device address 7
Bits 0:31 - Search pattern configuration
Bits 0:31 - Pattern mask
Checks if the value of the field is EDMODE
Checks if the value of the field is CARRIERMODE
Checks if the value of the field is CARRIERANDEDMODE
Checks if the value of the field is CARRIEROREDMODE
Checks if the value of the field is EDMODETEST1
Bits 8:15 - CCA energy busy threshold. Used in all the CCA modes except CarrierMode.
Bits 16:23 - CCA correlator busy threshold. Only relevant to CarrierMode, CarrierAndEdMode, and CarrierOrEdMode.
Bits 24:31 - Limit for occurances above CCACORRTHRES. When not equal to zero the corrolator based signal detect is enabled.
Get enumerated values variant
Checks if the value of the field is DISABLED
Bits 0:1 - Direction finding operation mode
Get enumerated values variant
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Get enumerated values variant
Checks if the value of the field is NOTINS1
Get enumerated values variant
Get enumerated values variant
Get enumerated values variant
Bit 0 - Enable parsing of CTEInfo from received packet in BLE modes
Bit 3 - CTEInfo is S1 byte or not
Bit 4 - Sampling/switching if CRC is not OK
Bits 6:7 - Max range of CTETime
Bits 10:12 - Spacing between samples for the samples in the SWITCHING period when CTEINLINEMODE is set.
Bits 13:15 - Spacing between samples for the samples in the SWITCHING period when CTEINLINEMODE is set.
Get enumerated values variant
Checks if the value of the field is PAYLOAD
Get enumerated values variant
Get enumerated values variant
Get enumerated values variant
Checks if the value of the field is MAGPHASE
Get enumerated values variant
Get enumerated values variant
Checks if the value of the field is NOREPEAT
Bits 0:5 - Length of the AoA/AoD procedure in number of 8 us units
Bit 7 - Add CTE extension and do antenna switching/sampling in this extension
Bits 8:10 - Interval between every time the antenna is changed in the SWITCHING state
Bits 12:14 - Interval between samples in the REFERENCE period
Bit 15 - Whether to sample I/Q or magnitude/phase
Bits 16:18 - Interval between samples in the SWITCHING period when CTEINLINECTRLEN is 0
Bits 20:23 - Repeat each individual antenna pattern N times sequentially, i.e. P0, P0, P1, P1, P2, P2, P3, P3, etc.
Bits 24:27 - Gain will be lowered by the specified number of gain steps at the start of CTE
Bits 0:12 - Signed value offset after the end of the CRC before starting switching in number of 16M cycles
Bits 16:27 - Signed value offset before starting sampling in number of 16M cycles relative to the beginning of the REFERENCE state - 12 us after switching start
Bits 0:7 - Fill array of GPIO patterns for antenna control.
Bit 0 - Clears GPIO pattern array for antenna control
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - CTS is activated (set low). Clear To Send.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - CTS is deactivated (set high). Not Clear To Send.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Data received in RXD
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Data sent from TXD
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Error detected
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Receiver timeout
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 3 - Shortcut between event CTS and task STARTRX
Bit 4 - Shortcut between event NCTS and task STOPRX
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is NOTPRESENT
Checks if the value of the field is PRESENT
Checks if the value of the field is NOTPRESENT
Checks if the value of the field is PRESENT
Checks if the value of the field is NOTPRESENT
Checks if the value of the field is PRESENT
Checks if the value of the field is NOTPRESENT
Checks if the value of the field is PRESENT
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is BAUD1200
Checks if the value of the field is BAUD2400
Checks if the value of the field is BAUD4800
Checks if the value of the field is BAUD9600
Checks if the value of the field is BAUD14400
Checks if the value of the field is BAUD19200
Checks if the value of the field is BAUD28800
Checks if the value of the field is BAUD31250
Checks if the value of the field is BAUD38400
Checks if the value of the field is BAUD56000
Checks if the value of the field is BAUD57600
Checks if the value of the field is BAUD76800
Checks if the value of the field is BAUD115200
Checks if the value of the field is BAUD230400
Checks if the value of the field is BAUD250000
Checks if the value of the field is BAUD460800
Checks if the value of the field is BAUD921600
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - CTS is activated (set low). Clear To Send.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - CTS is deactivated (set high). Not Clear To Send.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Data received in RXD (but potentially not yet transferred to Data RAM)
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Receive buffer is filled up
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Data sent from TXD
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Last TX byte transmitted
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Error detected
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Receiver timeout
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - UART receiver has started
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - UART transmitter has started
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Transmitter stopped
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 5 - Shortcut between event ENDRX and task STARTRX
Bit 6 - Shortcut between event ENDRX and task STOPRX
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 19 - Enable or disable interrupt for event RXSTARTED
Bit 20 - Enable or disable interrupt for event TXSTARTED
Bit 22 - Enable or disable interrupt for event TXSTOPPED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 19 - Write ‘1’ to enable interrupt for event RXSTARTED
Bit 20 - Write ‘1’ to enable interrupt for event TXSTARTED
Bit 22 - Write ‘1’ to enable interrupt for event TXSTOPPED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 19 - Write ‘1’ to disable interrupt for event RXSTARTED
Bit 20 - Write ‘1’ to disable interrupt for event TXSTARTED
Bit 22 - Write ‘1’ to disable interrupt for event TXSTOPPED
Checks if the value of the field is NOTPRESENT
Checks if the value of the field is PRESENT
Checks if the value of the field is NOTPRESENT
Checks if the value of the field is PRESENT
Checks if the value of the field is NOTPRESENT
Checks if the value of the field is PRESENT
Checks if the value of the field is NOTPRESENT
Checks if the value of the field is PRESENT
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is BAUD1200
Checks if the value of the field is BAUD2400
Checks if the value of the field is BAUD4800
Checks if the value of the field is BAUD9600
Checks if the value of the field is BAUD14400
Checks if the value of the field is BAUD19200
Checks if the value of the field is BAUD28800
Checks if the value of the field is BAUD31250
Checks if the value of the field is BAUD38400
Checks if the value of the field is BAUD56000
Checks if the value of the field is BAUD57600
Checks if the value of the field is BAUD76800
Checks if the value of the field is BAUD115200
Checks if the value of the field is BAUD230400
Checks if the value of the field is BAUD250000
Checks if the value of the field is BAUD460800
Checks if the value of the field is BAUD921600
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - TXD byte sent and RXD byte received
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Bits 0:31 - SPI master data rate
Checks if the value of the field is MSBFIRST
Checks if the value of the field is LSBFIRST
Checks if the value of the field is LEADING
Checks if the value of the field is TRAILING
Checks if the value of the field is ACTIVEHIGH
Checks if the value of the field is ACTIVELOW
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISABLED
Checks if the value of the field is ARRAYLIST
Checks if the value of the field is DISABLED
Checks if the value of the field is ARRAYLIST
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - SPI transaction has stopped
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - End of RXD buffer reached
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - End of RXD buffer and TXD buffer reached
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - End of TXD buffer reached
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Transaction started
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 17 - Shortcut between event END and task START
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Bits 0:31 - SPI master data rate
Checks if the value of the field is MSBFIRST
Checks if the value of the field is LSBFIRST
Checks if the value of the field is LEADING
Checks if the value of the field is TRAILING
Checks if the value of the field is ACTIVEHIGH
Checks if the value of the field is ACTIVELOW
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISABLED
Checks if the value of the field is ARRAYLIST
Checks if the value of the field is DISABLED
Checks if the value of the field is ARRAYLIST
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Granted transaction completed
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - End of RXD buffer reached
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Semaphore acquired
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 2 - Shortcut between event END and task ACQUIRE
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is CPUPENDING
Get enumerated values variant
Checks if the value of the field is NOTPRESENT
Checks if the value of the field is PRESENT
Get enumerated values variant
Checks if the value of the field is NOTPRESENT
Checks if the value of the field is PRESENT
Bit 0 - TX buffer over-read detected, and prevented
Bit 1 - RX buffer overflow detected, and prevented
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is MSBFIRST
Checks if the value of the field is LSBFIRST
Checks if the value of the field is LEADING
Checks if the value of the field is TRAILING
Checks if the value of the field is ACTIVEHIGH
Checks if the value of the field is ACTIVELOW
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - TWI stopped
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - TWI RXD byte received
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - TWI TXD byte sent
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - TWI error
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - TWI byte boundary, generated before each byte that is sent or received
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - TWI entered the suspended state
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Shortcut between event BB and task SUSPEND
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 2 - Write ‘1’ to enable interrupt for event RXDREADY
Bit 18 - Write ‘1’ to enable interrupt for event SUSPENDED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 2 - Write ‘1’ to disable interrupt for event RXDREADY
Bit 18 - Write ‘1’ to disable interrupt for event SUSPENDED
Checks if the value of the field is NOTPRESENT
Checks if the value of the field is PRESENT
Checks if the value of the field is NOTPRESENT
Checks if the value of the field is PRESENT
Checks if the value of the field is NOTPRESENT
Checks if the value of the field is PRESENT
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Bits 0:31 - TWI master clock frequency
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISABLED
Checks if the value of the field is ARRAYLIST
Checks if the value of the field is DISABLED
Checks if the value of the field is ARRAYLIST
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - TWI stopped
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - TWI error
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - SUSPEND task has been issued, TWI traffic is now suspended.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Receive sequence started
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Transmit sequence started
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Byte boundary, starting to receive the last byte
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Byte boundary, starting to transmit the last byte
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 7 - Shortcut between event LASTTX and task STARTRX
Bit 8 - Shortcut between event LASTTX and task SUSPEND
Bit 9 - Shortcut between event LASTTX and task STOP
Bit 10 - Shortcut between event LASTRX and task STARTTX
Bit 11 - Shortcut between event LASTRX and task SUSPEND
Bit 12 - Shortcut between event LASTRX and task STOP
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 18 - Enable or disable interrupt for event SUSPENDED
Bit 19 - Enable or disable interrupt for event RXSTARTED
Bit 20 - Enable or disable interrupt for event TXSTARTED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 18 - Write ‘1’ to enable interrupt for event SUSPENDED
Bit 19 - Write ‘1’ to enable interrupt for event RXSTARTED
Bit 20 - Write ‘1’ to enable interrupt for event TXSTARTED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 18 - Write ‘1’ to disable interrupt for event SUSPENDED
Bit 19 - Write ‘1’ to disable interrupt for event RXSTARTED
Bit 20 - Write ‘1’ to disable interrupt for event TXSTARTED
Checks if the value of the field is NOTRECEIVED
Checks if the value of the field is RECEIVED
Checks if the value of the field is NOTRECEIVED
Checks if the value of the field is RECEIVED
Checks if the value of the field is NOTRECEIVED
Checks if the value of the field is RECEIVED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Bits 0:31 - TWI master clock frequency
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISABLED
Checks if the value of the field is ARRAYLIST
Checks if the value of the field is DISABLED
Checks if the value of the field is ARRAYLIST
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - TWI stopped
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - TWI error
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Receive sequence started
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Transmit sequence started
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Write command received
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Read command received
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 13 - Shortcut between event WRITE and task SUSPEND
Bit 14 - Shortcut between event READ and task SUSPEND
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 19 - Enable or disable interrupt for event RXSTARTED
Bit 20 - Enable or disable interrupt for event TXSTARTED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 19 - Write ‘1’ to enable interrupt for event RXSTARTED
Bit 20 - Write ‘1’ to enable interrupt for event TXSTARTED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 19 - Write ‘1’ to disable interrupt for event RXSTARTED
Bit 20 - Write ‘1’ to disable interrupt for event TXSTARTED
Get enumerated values variant
Checks if the value of the field is NOTDETECTED
Checks if the value of the field is DETECTED
Checks if the value of the field is NOTRECEIVED
Checks if the value of the field is RECEIVED
Get enumerated values variant
Checks if the value of the field is NOTDETECTED
Checks if the value of the field is DETECTED
Bit 0 - RX buffer overflow detected, and prevented
Bit 3 - TX buffer over-read detected, and prevented
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Enable or disable address matching on ADDRESS[0]
Bit 1 - Enable or disable address matching on ADDRESS[1]
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Event generated from pin specified in CONFIG[n].PSEL
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Event generated from multiple input GPIO pins with SENSE mechanism enabled
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Get enumerated values variant
Checks if the value of the field is LOTOHI
Checks if the value of the field is HITOLO
Bits 8:12 - GPIO number associated with SET[n], CLR[n], and OUT[n] tasks and IN[n] event
Bits 16:17 - When In task mode: Operation to be performed on output when OUT[n] task is triggered. When In event mode: Operation on input that shall trigger IN[n] event.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Compare event on CC[n] match
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Shortcut between event COMPARE[0] and task CLEAR
Bit 1 - Shortcut between event COMPARE[1] and task CLEAR
Bit 2 - Shortcut between event COMPARE[2] and task CLEAR
Bit 3 - Shortcut between event COMPARE[3] and task CLEAR
Bit 4 - Shortcut between event COMPARE[4] and task CLEAR
Bit 5 - Shortcut between event COMPARE[5] and task CLEAR
Bit 8 - Shortcut between event COMPARE[0] and task STOP
Bit 9 - Shortcut between event COMPARE[1] and task STOP
Bit 10 - Shortcut between event COMPARE[2] and task STOP
Bit 11 - Shortcut between event COMPARE[3] and task STOP
Bit 12 - Shortcut between event COMPARE[4] and task STOP
Bit 13 - Shortcut between event COMPARE[5] and task STOP
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 16 - Write ‘1’ to enable interrupt for event COMPARE[0]
Bit 17 - Write ‘1’ to enable interrupt for event COMPARE[1]
Bit 18 - Write ‘1’ to enable interrupt for event COMPARE[2]
Bit 19 - Write ‘1’ to enable interrupt for event COMPARE[3]
Bit 20 - Write ‘1’ to enable interrupt for event COMPARE[4]
Bit 21 - Write ‘1’ to enable interrupt for event COMPARE[5]
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 16 - Write ‘1’ to disable interrupt for event COMPARE[0]
Bit 17 - Write ‘1’ to disable interrupt for event COMPARE[1]
Bit 18 - Write ‘1’ to disable interrupt for event COMPARE[2]
Bit 19 - Write ‘1’ to disable interrupt for event COMPARE[3]
Bit 20 - Write ‘1’ to disable interrupt for event COMPARE[4]
Bit 21 - Write ‘1’ to disable interrupt for event COMPARE[5]
Checks if the value of the field is COUNTER
Checks if the value of the field is LOWPOWERCOUNTER
Bits 0:3 - Prescaler value
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Event on COUNTER increment
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Event on COUNTER overflow
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Compare event on CC[n] match
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 16 - Write ‘1’ to enable interrupt for event COMPARE[0]
Bit 17 - Write ‘1’ to enable interrupt for event COMPARE[1]
Bit 18 - Write ‘1’ to enable interrupt for event COMPARE[2]
Bit 19 - Write ‘1’ to enable interrupt for event COMPARE[3]
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 16 - Write ‘1’ to disable interrupt for event COMPARE[0]
Bit 17 - Write ‘1’ to disable interrupt for event COMPARE[1]
Bit 18 - Write ‘1’ to disable interrupt for event COMPARE[2]
Bit 19 - Write ‘1’ to disable interrupt for event COMPARE[3]
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 16 - Enable or disable event routing for event COMPARE[0]
Bit 17 - Enable or disable event routing for event COMPARE[1]
Bit 18 - Enable or disable event routing for event COMPARE[2]
Bit 19 - Enable or disable event routing for event COMPARE[3]
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 16 - Write ‘1’ to enable event routing for event COMPARE[0]
Bit 17 - Write ‘1’ to enable event routing for event COMPARE[1]
Bit 18 - Write ‘1’ to enable event routing for event COMPARE[2]
Bit 19 - Write ‘1’ to enable event routing for event COMPARE[3]
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 1 - Write ‘1’ to disable event routing for event OVRFLW
Bit 16 - Write ‘1’ to disable event routing for event COMPARE[0]
Bit 17 - Write ‘1’ to disable event routing for event COMPARE[1]
Bit 18 - Write ‘1’ to disable event routing for event COMPARE[2]
Bit 19 - Write ‘1’ to disable event routing for event COMPARE[3]
Bits 0:11 - Prescaler value
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Temperature measurement complete, data ready
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Event being generated for every new random number written to the VALUE register
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Shortcut between event VALRDY and task STOP
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - ECB block encrypt complete
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - ECB block encrypt aborted because of a STOPECB task or due to an error
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bits 0:31 - Pointer to the ECB data structure (see Table 1 ECB data structure overview)
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Address resolution procedure complete
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Address resolved
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Address not resolved
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 1 - Write ‘1’ to enable interrupt for event RESOLVED
Bit 2 - Write ‘1’ to enable interrupt for event NOTRESOLVED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 1 - Write ‘1’ to disable interrupt for event RESOLVED
Bit 2 - Write ‘1’ to disable interrupt for event NOTRESOLVED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bits 0:31 - Pointer to a scratch data area used for temporary storage during resolution. A space of minimum 3 bytes must be reserved.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Keystream generation complete
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Encrypt/decrypt complete
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Deprecated field - CCM error event
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Shortcut between event ENDKSGEN and task CRYPT
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Write ‘1’ to enable interrupt for event ENDKSGEN
Bit 1 - Write ‘1’ to enable interrupt for event ENDCRYPT
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Write ‘1’ to disable interrupt for event ENDKSGEN
Bit 1 - Write ‘1’ to disable interrupt for event ENDCRYPT
Get enumerated values variant
Checks if the value of the field is CHECKFAILED
Checks if the value of the field is CHECKPASSED
Bit 0 - The result of the MIC check performed during the previous decryption operation
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is ENCRYPTION
Checks if the value of the field is DECRYPTION
Get enumerated values variant
Checks if the value of the field is _125KBPS
Checks if the value of the field is _500KBPS
Checks if the value of the field is DEFAULT
Checks if the value of the field is EXTENDED
Bit 0 - The mode of operation to be used. The settings in this register apply whenever either the KSGEN or CRYPT tasks are triggered.
Bits 16:17 - Radio data rate that the CCM shall run synchronous with
Bits 0:31 - Pointer to a scratch data area used for temporary storage during keystream generation, MIC generation and encryption/decryption.
Bits 0:7 - Length of keystream generated when MODE.LENGTH = Extended. This value must be greater or equal to the subsequent packet payload to be encrypted/decrypted.
Get enumerated values variant
Checks if the value of the field is _125KBPS
Checks if the value of the field is _500KBPS
Bits 0:1 - Data rate override setting.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Watchdog timeout
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is NOTRUNNING
Checks if the value of the field is RUNNING
Bit 0 - Indicates whether or not the watchdog is running
Checks if the value of the field is DISABLEDORREQUESTED
Checks if the value of the field is ENABLEDANDUNREQUESTED
Checks if the value of the field is DISABLEDORREQUESTED
Checks if the value of the field is ENABLEDANDUNREQUESTED
Checks if the value of the field is DISABLEDORREQUESTED
Checks if the value of the field is ENABLEDANDUNREQUESTED
Checks if the value of the field is DISABLEDORREQUESTED
Checks if the value of the field is ENABLEDANDUNREQUESTED
Checks if the value of the field is DISABLEDORREQUESTED
Checks if the value of the field is ENABLEDANDUNREQUESTED
Checks if the value of the field is DISABLEDORREQUESTED
Checks if the value of the field is ENABLEDANDUNREQUESTED
Checks if the value of the field is DISABLEDORREQUESTED
Checks if the value of the field is ENABLEDANDUNREQUESTED
Checks if the value of the field is DISABLEDORREQUESTED
Checks if the value of the field is ENABLEDANDUNREQUESTED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Checks if the value of the field is DISCONNECTED
Checks if the value of the field is CONNECTED
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Event being generated for every new sample value written to the SAMPLE register
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Non-null report ready
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - ACC or ACCDBL register overflow
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Double displacement(s) detected
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - QDEC has been stopped
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Shortcut between event REPORTRDY and task READCLRACC
Bit 1 - Shortcut between event SAMPLERDY and task STOP
Bit 2 - Shortcut between event REPORTRDY and task RDCLRACC
Bit 3 - Shortcut between event REPORTRDY and task STOP
Bit 4 - Shortcut between event DBLRDY and task RDCLRDBL
Bit 5 - Shortcut between event DBLRDY and task STOP
Bit 6 - Shortcut between event SAMPLERDY and task READCLRACC
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Write ‘1’ to enable interrupt for event SAMPLERDY
Bit 1 - Write ‘1’ to enable interrupt for event REPORTRDY
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Write ‘1’ to disable interrupt for event SAMPLERDY
Bit 1 - Write ‘1’ to disable interrupt for event REPORTRDY
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is ACTIVELOW
Checks if the value of the field is ACTIVEHIGH
Get enumerated values variant
Checks if the value of the field is _16384US
Bits 0:3 - Sample period. The SAMPLE register will be updated for every new sample
Get enumerated values variant
Checks if the value of the field is _120SMPL
Checks if the value of the field is _160SMPL
Checks if the value of the field is _200SMPL
Checks if the value of the field is _240SMPL
Checks if the value of the field is _280SMPL
Bits 0:3 - Specifies the number of samples to be accumulated in the ACC register before the REPORTRDY and DBLRDY events can be generated.
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bits 0:3 - Snapshot of the ACCDBL register. This field is updated when the READCLRACC or RDCLRDBL task is triggered.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - COMP is ready and output is valid
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Downward crossing
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Upward crossing
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Downward or upward crossing
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Shortcut between event READY and task SAMPLE
Bit 1 - Shortcut between event READY and task STOP
Bit 2 - Shortcut between event DOWN and task STOP
Bit 4 - Shortcut between event CROSS and task STOP
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is ANALOGINPUT0
Checks if the value of the field is ANALOGINPUT1
Checks if the value of the field is ANALOGINPUT2
Checks if the value of the field is ANALOGINPUT3
Checks if the value of the field is VDDHDIV5
Get enumerated values variant
Checks if the value of the field is ANALOGREFERENCE0
Checks if the value of the field is ANALOGREFERENCE1
Checks if the value of the field is ANALOGREFERENCE2
Checks if the value of the field is ANALOGREFERENCE3
Bits 0:2 - External analog reference select
Checks if the value of the field is NOHYST
Checks if the value of the field is HYST50MV
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Event number n generated by triggering the corresponding TRIGGER[n] task
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Enable or disable interrupt for event TRIGGERED[0]
Bit 1 - Enable or disable interrupt for event TRIGGERED[1]
Bit 2 - Enable or disable interrupt for event TRIGGERED[2]
Bit 3 - Enable or disable interrupt for event TRIGGERED[3]
Bit 4 - Enable or disable interrupt for event TRIGGERED[4]
Bit 5 - Enable or disable interrupt for event TRIGGERED[5]
Bit 6 - Enable or disable interrupt for event TRIGGERED[6]
Bit 7 - Enable or disable interrupt for event TRIGGERED[7]
Bit 8 - Enable or disable interrupt for event TRIGGERED[8]
Bit 9 - Enable or disable interrupt for event TRIGGERED[9]
Bit 10 - Enable or disable interrupt for event TRIGGERED[10]
Bit 11 - Enable or disable interrupt for event TRIGGERED[11]
Bit 12 - Enable or disable interrupt for event TRIGGERED[12]
Bit 13 - Enable or disable interrupt for event TRIGGERED[13]
Bit 14 - Enable or disable interrupt for event TRIGGERED[14]
Bit 15 - Enable or disable interrupt for event TRIGGERED[15]
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Write ‘1’ to enable interrupt for event TRIGGERED[0]
Bit 1 - Write ‘1’ to enable interrupt for event TRIGGERED[1]
Bit 2 - Write ‘1’ to enable interrupt for event TRIGGERED[2]
Bit 3 - Write ‘1’ to enable interrupt for event TRIGGERED[3]
Bit 4 - Write ‘1’ to enable interrupt for event TRIGGERED[4]
Bit 5 - Write ‘1’ to enable interrupt for event TRIGGERED[5]
Bit 6 - Write ‘1’ to enable interrupt for event TRIGGERED[6]
Bit 7 - Write ‘1’ to enable interrupt for event TRIGGERED[7]
Bit 8 - Write ‘1’ to enable interrupt for event TRIGGERED[8]
Bit 9 - Write ‘1’ to enable interrupt for event TRIGGERED[9]
Bit 10 - Write ‘1’ to enable interrupt for event TRIGGERED[10]
Bit 11 - Write ‘1’ to enable interrupt for event TRIGGERED[11]
Bit 12 - Write ‘1’ to enable interrupt for event TRIGGERED[12]
Bit 13 - Write ‘1’ to enable interrupt for event TRIGGERED[13]
Bit 14 - Write ‘1’ to enable interrupt for event TRIGGERED[14]
Bit 15 - Write ‘1’ to enable interrupt for event TRIGGERED[15]
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Write ‘1’ to disable interrupt for event TRIGGERED[0]
Bit 1 - Write ‘1’ to disable interrupt for event TRIGGERED[1]
Bit 2 - Write ‘1’ to disable interrupt for event TRIGGERED[2]
Bit 3 - Write ‘1’ to disable interrupt for event TRIGGERED[3]
Bit 4 - Write ‘1’ to disable interrupt for event TRIGGERED[4]
Bit 5 - Write ‘1’ to disable interrupt for event TRIGGERED[5]
Bit 6 - Write ‘1’ to disable interrupt for event TRIGGERED[6]
Bit 7 - Write ‘1’ to disable interrupt for event TRIGGERED[7]
Bit 8 - Write ‘1’ to disable interrupt for event TRIGGERED[8]
Bit 9 - Write ‘1’ to disable interrupt for event TRIGGERED[9]
Bit 10 - Write ‘1’ to disable interrupt for event TRIGGERED[10]
Bit 11 - Write ‘1’ to disable interrupt for event TRIGGERED[11]
Bit 12 - Write ‘1’ to disable interrupt for event TRIGGERED[12]
Bit 13 - Write ‘1’ to disable interrupt for event TRIGGERED[13]
Bit 14 - Write ‘1’ to disable interrupt for event TRIGGERED[14]
Bit 15 - Write ‘1’ to disable interrupt for event TRIGGERED[15]
Bit 0 - NVMC can accept a new write operation
Bits 0:6 - Duration of the partial erase in milliseconds
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Channel 0 enable set register. Writing ‘0’ has no effect.
Bit 1 - Channel 1 enable set register. Writing ‘0’ has no effect.
Bit 2 - Channel 2 enable set register. Writing ‘0’ has no effect.
Bit 3 - Channel 3 enable set register. Writing ‘0’ has no effect.
Bit 4 - Channel 4 enable set register. Writing ‘0’ has no effect.
Bit 5 - Channel 5 enable set register. Writing ‘0’ has no effect.
Bit 6 - Channel 6 enable set register. Writing ‘0’ has no effect.
Bit 7 - Channel 7 enable set register. Writing ‘0’ has no effect.
Bit 8 - Channel 8 enable set register. Writing ‘0’ has no effect.
Bit 9 - Channel 9 enable set register. Writing ‘0’ has no effect.
Bit 10 - Channel 10 enable set register. Writing ‘0’ has no effect.
Bit 11 - Channel 11 enable set register. Writing ‘0’ has no effect.
Bit 12 - Channel 12 enable set register. Writing ‘0’ has no effect.
Bit 13 - Channel 13 enable set register. Writing ‘0’ has no effect.
Bit 14 - Channel 14 enable set register. Writing ‘0’ has no effect.
Bit 15 - Channel 15 enable set register. Writing ‘0’ has no effect.
Bit 16 - Channel 16 enable set register. Writing ‘0’ has no effect.
Bit 17 - Channel 17 enable set register. Writing ‘0’ has no effect.
Bit 18 - Channel 18 enable set register. Writing ‘0’ has no effect.
Bit 19 - Channel 19 enable set register. Writing ‘0’ has no effect.
Bit 20 - Channel 20 enable set register. Writing ‘0’ has no effect.
Bit 21 - Channel 21 enable set register. Writing ‘0’ has no effect.
Bit 22 - Channel 22 enable set register. Writing ‘0’ has no effect.
Bit 23 - Channel 23 enable set register. Writing ‘0’ has no effect.
Bit 24 - Channel 24 enable set register. Writing ‘0’ has no effect.
Bit 25 - Channel 25 enable set register. Writing ‘0’ has no effect.
Bit 26 - Channel 26 enable set register. Writing ‘0’ has no effect.
Bit 27 - Channel 27 enable set register. Writing ‘0’ has no effect.
Bit 28 - Channel 28 enable set register. Writing ‘0’ has no effect.
Bit 29 - Channel 29 enable set register. Writing ‘0’ has no effect.
Bit 30 - Channel 30 enable set register. Writing ‘0’ has no effect.
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Channel 0 enable clear register. Writing ‘0’ has no effect.
Bit 1 - Channel 1 enable clear register. Writing ‘0’ has no effect.
Bit 2 - Channel 2 enable clear register. Writing ‘0’ has no effect.
Bit 3 - Channel 3 enable clear register. Writing ‘0’ has no effect.
Bit 4 - Channel 4 enable clear register. Writing ‘0’ has no effect.
Bit 5 - Channel 5 enable clear register. Writing ‘0’ has no effect.
Bit 6 - Channel 6 enable clear register. Writing ‘0’ has no effect.
Bit 7 - Channel 7 enable clear register. Writing ‘0’ has no effect.
Bit 8 - Channel 8 enable clear register. Writing ‘0’ has no effect.
Bit 9 - Channel 9 enable clear register. Writing ‘0’ has no effect.
Bit 10 - Channel 10 enable clear register. Writing ‘0’ has no effect.
Bit 11 - Channel 11 enable clear register. Writing ‘0’ has no effect.
Bit 12 - Channel 12 enable clear register. Writing ‘0’ has no effect.
Bit 13 - Channel 13 enable clear register. Writing ‘0’ has no effect.
Bit 14 - Channel 14 enable clear register. Writing ‘0’ has no effect.
Bit 15 - Channel 15 enable clear register. Writing ‘0’ has no effect.
Bit 16 - Channel 16 enable clear register. Writing ‘0’ has no effect.
Bit 17 - Channel 17 enable clear register. Writing ‘0’ has no effect.
Bit 18 - Channel 18 enable clear register. Writing ‘0’ has no effect.
Bit 19 - Channel 19 enable clear register. Writing ‘0’ has no effect.
Bit 20 - Channel 20 enable clear register. Writing ‘0’ has no effect.
Bit 21 - Channel 21 enable clear register. Writing ‘0’ has no effect.
Bit 22 - Channel 22 enable clear register. Writing ‘0’ has no effect.
Bit 23 - Channel 23 enable clear register. Writing ‘0’ has no effect.
Bit 24 - Channel 24 enable clear register. Writing ‘0’ has no effect.
Bit 25 - Channel 25 enable clear register. Writing ‘0’ has no effect.
Bit 26 - Channel 26 enable clear register. Writing ‘0’ has no effect.
Bit 27 - Channel 27 enable clear register. Writing ‘0’ has no effect.
Bit 28 - Channel 28 enable clear register. Writing ‘0’ has no effect.
Bit 29 - Channel 29 enable clear register. Writing ‘0’ has no effect.
Bit 30 - Channel 30 enable clear register. Writing ‘0’ has no effect.
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Checks if the value of the field is EXCLUDED
Checks if the value of the field is INCLUDED
Get enumerated values variant
Checks if the value of the field is NOTHALTED
Bits 0:15 - IN endpoint halted status. Can be used as is as response to a GetStatus() request to endpoint.
Get enumerated values variant
Checks if the value of the field is NOTHALTED
Bits 0:15 - OUT endpoint halted status. Can be used as is as response to a GetStatus() request to endpoint.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Signals that a USB reset condition has been detected on USB lines
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Confirms that the EPIN[n].PTR and EPIN[n].MAXCNT, or EPOUT[n].PTR and EPOUT[n].MAXCNT registers have been captured on all endpoints reported in the EPSTATUS register
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - The whole EPIN[n] buffer has been consumed. The buffer can be accessed safely by software.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - An acknowledged data transfer has taken place on the control endpoint
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - The whole ISOIN buffer has been consumed. The buffer can be accessed safely by software.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - The whole EPOUT[n] buffer has been consumed. The buffer can be accessed safely by software.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - The whole ISOOUT buffer has been consumed. The buffer can be accessed safely by software.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - Signals that a SOF (start of frame) condition has been detected on USB lines
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - An event or an error not covered by specific events has occurred. Check EVENTCAUSE register to find the cause.
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - A valid SETUP token has been received (and acknowledged) on the control endpoint
Get enumerated values variant
Checks if the value of the field is NOTGENERATED
Checks if the value of the field is GENERATED
Bit 0 - A data transfer has occurred on a data endpoint, indicated by the EPDATASTATUS register
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Shortcut between event EP0DATADONE and task STARTEPIN[0]
Bit 1 - Shortcut between event EP0DATADONE and task STARTEPOUT[0]
Bit 2 - Shortcut between event EP0DATADONE and task EP0STATUS
Bit 3 - Shortcut between event ENDEPOUT[0] and task EP0STATUS
Bit 4 - Shortcut between event ENDEPOUT[0] and task EP0RCVOUT
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Enable or disable interrupt for event USBRESET
Bit 2 - Enable or disable interrupt for event ENDEPIN[0]
Bit 3 - Enable or disable interrupt for event ENDEPIN[1]
Bit 4 - Enable or disable interrupt for event ENDEPIN[2]
Bit 5 - Enable or disable interrupt for event ENDEPIN[3]
Bit 6 - Enable or disable interrupt for event ENDEPIN[4]
Bit 7 - Enable or disable interrupt for event ENDEPIN[5]
Bit 8 - Enable or disable interrupt for event ENDEPIN[6]
Bit 9 - Enable or disable interrupt for event ENDEPIN[7]
Bit 10 - Enable or disable interrupt for event EP0DATADONE
Bit 11 - Enable or disable interrupt for event ENDISOIN
Bit 12 - Enable or disable interrupt for event ENDEPOUT[0]
Bit 13 - Enable or disable interrupt for event ENDEPOUT[1]
Bit 14 - Enable or disable interrupt for event ENDEPOUT[2]
Bit 15 - Enable or disable interrupt for event ENDEPOUT[3]
Bit 16 - Enable or disable interrupt for event ENDEPOUT[4]
Bit 17 - Enable or disable interrupt for event ENDEPOUT[5]
Bit 18 - Enable or disable interrupt for event ENDEPOUT[6]
Bit 19 - Enable or disable interrupt for event ENDEPOUT[7]
Bit 20 - Enable or disable interrupt for event ENDISOOUT
Bit 22 - Enable or disable interrupt for event USBEVENT
Bit 23 - Enable or disable interrupt for event EP0SETUP
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Write ‘1’ to enable interrupt for event USBRESET
Bit 2 - Write ‘1’ to enable interrupt for event ENDEPIN[0]
Bit 3 - Write ‘1’ to enable interrupt for event ENDEPIN[1]
Bit 4 - Write ‘1’ to enable interrupt for event ENDEPIN[2]
Bit 5 - Write ‘1’ to enable interrupt for event ENDEPIN[3]
Bit 6 - Write ‘1’ to enable interrupt for event ENDEPIN[4]
Bit 7 - Write ‘1’ to enable interrupt for event ENDEPIN[5]
Bit 8 - Write ‘1’ to enable interrupt for event ENDEPIN[6]
Bit 9 - Write ‘1’ to enable interrupt for event ENDEPIN[7]
Bit 10 - Write ‘1’ to enable interrupt for event EP0DATADONE
Bit 11 - Write ‘1’ to enable interrupt for event ENDISOIN
Bit 12 - Write ‘1’ to enable interrupt for event ENDEPOUT[0]
Bit 13 - Write ‘1’ to enable interrupt for event ENDEPOUT[1]
Bit 14 - Write ‘1’ to enable interrupt for event ENDEPOUT[2]
Bit 15 - Write ‘1’ to enable interrupt for event ENDEPOUT[3]
Bit 16 - Write ‘1’ to enable interrupt for event ENDEPOUT[4]
Bit 17 - Write ‘1’ to enable interrupt for event ENDEPOUT[5]
Bit 18 - Write ‘1’ to enable interrupt for event ENDEPOUT[6]
Bit 19 - Write ‘1’ to enable interrupt for event ENDEPOUT[7]
Bit 20 - Write ‘1’ to enable interrupt for event ENDISOOUT
Bit 22 - Write ‘1’ to enable interrupt for event USBEVENT
Bit 23 - Write ‘1’ to enable interrupt for event EP0SETUP
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Get enumerated values variant
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Bit 0 - Write ‘1’ to disable interrupt for event USBRESET
Bit 2 - Write ‘1’ to disable interrupt for event ENDEPIN[0]
Bit 3 - Write ‘1’ to disable interrupt for event ENDEPIN[1]
Bit 4 - Write ‘1’ to disable interrupt for event ENDEPIN[2]
Bit 5 - Write ‘1’ to disable interrupt for event ENDEPIN[3]
Bit 6 - Write ‘1’ to disable interrupt for event ENDEPIN[4]
Bit 7 - Write ‘1’ to disable interrupt for event ENDEPIN[5]
Bit 8 - Write ‘1’ to disable interrupt for event ENDEPIN[6]
Bit 9 - Write ‘1’ to disable interrupt for event ENDEPIN[7]
Bit 10 - Write ‘1’ to disable interrupt for event EP0DATADONE
Bit 11 - Write ‘1’ to disable interrupt for event ENDISOIN
Bit 12 - Write ‘1’ to disable interrupt for event ENDEPOUT[0]
Bit 13 - Write ‘1’ to disable interrupt for event ENDEPOUT[1]
Bit 14 - Write ‘1’ to disable interrupt for event ENDEPOUT[2]
Bit 15 - Write ‘1’ to disable interrupt for event ENDEPOUT[3]
Bit 16 - Write ‘1’ to disable interrupt for event ENDEPOUT[4]
Bit 17 - Write ‘1’ to disable interrupt for event ENDEPOUT[5]
Bit 18 - Write ‘1’ to disable interrupt for event ENDEPOUT[6]
Bit 19 - Write ‘1’ to disable interrupt for event ENDEPOUT[7]
Bit 20 - Write ‘1’ to disable interrupt for event ENDISOOUT
Bit 22 - Write ‘1’ to disable interrupt for event USBEVENT
Bit 23 - Write ‘1’ to disable interrupt for event EP0SETUP
Get enumerated values variant
Checks if the value of the field is NOTDETECTED
Checks if the value of the field is DETECTED
Checks if the value of the field is NOTDETECTED
Checks if the value of the field is DETECTED
Checks if the value of the field is NOTDETECTED
Checks if the value of the field is DETECTED
Get enumerated values variant
Checks if the value of the field is NOTALLOWED
Checks if the value of the field is ALLOWED
Bit 0 - CRC error was detected on isochronous OUT endpoint 8. Write ‘1’ to clear.
Bit 8 - Signals that USB lines have been idle long enough for the device to enter suspend. Write ‘1’ to clear.
Bit 9 - Signals that a RESUME condition (K state or activity restart) has been detected on USB lines. Write ‘1’ to clear.
Bit 10 - USB MAC has been woken up and operational. Write ‘1’ to clear.
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Checks if the value of the field is NODATA
Checks if the value of the field is DATADONE
Bit 0 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 1 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 2 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 3 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 4 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 5 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 6 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 7 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 8 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 16 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 17 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 18 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 19 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 20 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 21 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 22 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Bit 23 - Captured state of endpoint’s EasyDMA registers. Write ‘1’ to clear.
Checks if the value of the field is NOTDONE
Checks if the value of the field is DATADONE
Checks if the value of the field is NOTDONE
Checks if the value of the field is DATADONE
Checks if the value of the field is NOTDONE
Checks if the value of the field is DATADONE
Checks if the value of the field is NOTDONE
Checks if the value of the field is DATADONE
Checks if the value of the field is NOTDONE
Checks if the value of the field is DATADONE
Checks if the value of the field is NOTDONE
Checks if the value of the field is DATADONE
Checks if the value of the field is NOTDONE
Checks if the value of the field is DATADONE
Checks if the value of the field is NOTSTARTED
Checks if the value of the field is STARTED
Checks if the value of the field is NOTSTARTED
Checks if the value of the field is STARTED
Checks if the value of the field is NOTSTARTED
Checks if the value of the field is STARTED
Checks if the value of the field is NOTSTARTED
Checks if the value of the field is STARTED
Checks if the value of the field is NOTSTARTED
Checks if the value of the field is STARTED
Checks if the value of the field is NOTSTARTED
Checks if the value of the field is STARTED
Checks if the value of the field is NOTSTARTED
Checks if the value of the field is STARTED
Bit 1 - Acknowledged data transfer on this IN endpoint. Write ‘1’ to clear.
Bit 2 - Acknowledged data transfer on this IN endpoint. Write ‘1’ to clear.
Bit 3 - Acknowledged data transfer on this IN endpoint. Write ‘1’ to clear.
Bit 4 - Acknowledged data transfer on this IN endpoint. Write ‘1’ to clear.
Bit 5 - Acknowledged data transfer on this IN endpoint. Write ‘1’ to clear.
Bit 6 - Acknowledged data transfer on this IN endpoint. Write ‘1’ to clear.
Bit 7 - Acknowledged data transfer on this IN endpoint. Write ‘1’ to clear.
Bit 17 - Acknowledged data transfer on this OUT endpoint. Write ‘1’ to clear.
Bit 18 - Acknowledged data transfer on this OUT endpoint. Write ‘1’ to clear.
Bit 19 - Acknowledged data transfer on this OUT endpoint. Write ‘1’ to clear.
Bit 20 - Acknowledged data transfer on this OUT endpoint. Write ‘1’ to clear.
Bit 21 - Acknowledged data transfer on this OUT endpoint. Write ‘1’ to clear.
Bit 22 - Acknowledged data transfer on this OUT endpoint. Write ‘1’ to clear.
Get enumerated values variant
Checks if the value of the field is INTERFACE
Checks if the value of the field is ENDPOINT
Checks if the value of the field is STANDARD
Get enumerated values variant
Checks if the value of the field is HOSTTODEVICE
Checks if the value of the field is DEVICETOHOST
Bits 0:4 - Data transfer type
Bit 7 - Data transfer direction
Get enumerated values variant
Checks if the value of the field is STD_GET_STATUS
Checks if the value of the field is STD_CLEAR_FEATURE
Checks if the value of the field is STD_SET_FEATURE
Checks if the value of the field is STD_SET_ADDRESS
Checks if the value of the field is STD_GET_DESCRIPTOR
Checks if the value of the field is STD_SET_DESCRIPTOR
Checks if the value of the field is STD_GET_CONFIGURATION
Checks if the value of the field is STD_SET_CONFIGURATION
Checks if the value of the field is STD_GET_INTERFACE
Checks if the value of the field is STD_SET_INTERFACE
Checks if the value of the field is STD_SYNCH_FRAME
Bits 0:7 - SETUP data, byte 1, bRequest. Values provided for standard requests only, user must implement class and vendor values.
Bits 0:7 - SETUP data, byte 6, LSB of wLength
Bits 0:7 - SETUP data, byte 7, MSB of wLength
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is DISABLED
Checks if the value of the field is ENABLED
Checks if the value of the field is ONEDIR
Checks if the value of the field is HALFIN
Bits 0:10 - Returns the current value of the start of frame counter
Get enumerated values variant
Checks if the value of the field is FORCENORMAL
Checks if the value of the field is LOWPOWER
Bit 0 - Controls USBD peripheral low-power mode during USB suspend
Get enumerated values variant
Checks if the value of the field is NORESP
Checks if the value of the field is ZERODATA
Bit 0 - Controls the response of the ISO IN endpoint to an IN token when no data is ready to be sent