Trait Resettable 

pub trait Resettable: RegisterSpec {
    const RESET_VALUE: Self::Ux;

    // Provided method
    fn reset_value() -> Self::Ux { ... }
}

Reset value of the register.

This value is the initial value for the write method. It can also be directly written to the register by using the reset method.

Required Associated Constants

const RESET_VALUE: Self::Ux

Reset value of the register.

Provided Methods

fn reset_value() -> Self::Ux

Reset value of the register.

Dyn Compatibility

This trait is not dyn compatible.

In older versions of Rust, dyn compatibility was called "object safety", so this trait is not object safe.

Implementors

impl Resettable for moondancer_pac::advertiser::control::CONTROL_SPEC

reset() method sets control to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::gpio0::input::INPUT_SPEC

reset() method sets Input to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::gpio0::mode::MODE_SPEC

reset() method sets Mode to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for moondancer_pac::gpio0::output::OUTPUT_SPEC

reset() method sets Output to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::gpio0::set_clr::SET_CLR_SPEC

reset() method sets SetClr to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for moondancer_pac::gpio1::input::INPUT_SPEC

reset() method sets Input to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::gpio1::mode::MODE_SPEC

reset() method sets Mode to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for moondancer_pac::gpio1::output::OUTPUT_SPEC

reset() method sets Output to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::gpio1::set_clr::SET_CLR_SPEC

reset() method sets SetClr to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for VERSION_SPEC

reset() method sets version to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for moondancer_pac::leds::input::INPUT_SPEC

reset() method sets Input to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::leds::mode::MODE_SPEC

reset() method sets Mode to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for moondancer_pac::leds::output::OUTPUT_SPEC

reset() method sets Output to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::leds::set_clr::SET_CLR_SPEC

reset() method sets SetClr to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for CS_SPEC

reset() method sets cs to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::spi0::data::DATA_SPEC

reset() method sets data to value 0

const RESET_VALUE: u64 = 0u64

impl Resettable for PHY_SPEC

reset() method sets phy to value 0

const RESET_VALUE: u32 = 0u32

impl Resettable for moondancer_pac::spi0::status::STATUS_SPEC

reset() method sets status to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::timer0::counter::COUNTER_SPEC

reset() method sets counter to value 0

const RESET_VALUE: u32 = 0u32

impl Resettable for moondancer_pac::timer0::enable::ENABLE_SPEC

reset() method sets enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::timer0::ev_enable::EV_ENABLE_SPEC

reset() method sets ev_enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::timer0::ev_pending::EV_PENDING_SPEC

reset() method sets ev_pending to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::timer0::mode::MODE_SPEC

reset() method sets mode to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::timer0::reload::RELOAD_SPEC

reset() method sets reload to value 0

const RESET_VALUE: u32 = 0u32

impl Resettable for moondancer_pac::timer1::counter::COUNTER_SPEC

reset() method sets counter to value 0

const RESET_VALUE: u32 = 0u32

impl Resettable for moondancer_pac::timer1::enable::ENABLE_SPEC

reset() method sets enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::timer1::ev_enable::EV_ENABLE_SPEC

reset() method sets ev_enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::timer1::ev_pending::EV_PENDING_SPEC

reset() method sets ev_pending to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::timer1::mode::MODE_SPEC

reset() method sets mode to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::timer1::reload::RELOAD_SPEC

reset() method sets reload to value 0

const RESET_VALUE: u32 = 0u32

impl Resettable for moondancer_pac::uart0::divisor::DIVISOR_SPEC

reset() method sets divisor to value 0

const RESET_VALUE: u32 = 0u32

impl Resettable for moondancer_pac::uart0::rx_avail::RX_AVAIL_SPEC

reset() method sets rx_avail to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::uart0::rx_data::RX_DATA_SPEC

reset() method sets rx_data to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::uart0::tx_data::TX_DATA_SPEC

reset() method sets tx_data to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::uart0::tx_ready::TX_READY_SPEC

reset() method sets tx_ready to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::uart1::divisor::DIVISOR_SPEC

reset() method sets divisor to value 0

const RESET_VALUE: u32 = 0u32

impl Resettable for moondancer_pac::uart1::rx_avail::RX_AVAIL_SPEC

reset() method sets rx_avail to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::uart1::rx_data::RX_DATA_SPEC

reset() method sets rx_data to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::uart1::tx_data::TX_DATA_SPEC

reset() method sets tx_data to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::uart1::tx_ready::TX_READY_SPEC

reset() method sets tx_ready to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0::control::CONTROL_SPEC

reset() method sets control to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for moondancer_pac::usb0::ev_enable::EV_ENABLE_SPEC

reset() method sets ev_enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0::ev_pending::EV_PENDING_SPEC

reset() method sets ev_pending to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0::status::STATUS_SPEC

reset() method sets status to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_control::control::CONTROL_SPEC

reset() method sets control to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_control::data::DATA_SPEC

reset() method sets data to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_control::ev_enable::EV_ENABLE_SPEC

reset() method sets ev_enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_control::ev_pending::EV_PENDING_SPEC

reset() method sets ev_pending to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_control::reset::RESET_SPEC

reset() method sets reset to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_control::status::STATUS_SPEC

reset() method sets status to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for moondancer_pac::usb0_ep_in::data::DATA_SPEC

reset() method sets data to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_in::endpoint::ENDPOINT_SPEC

reset() method sets endpoint to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_in::ev_enable::EV_ENABLE_SPEC

reset() method sets ev_enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_in::ev_pending::EV_PENDING_SPEC

reset() method sets ev_pending to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_in::pid::PID_SPEC

reset() method sets pid to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_in::reset::RESET_SPEC

reset() method sets reset to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_in::stall::STALL_SPEC

reset() method sets stall to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_in::status::STATUS_SPEC

reset() method sets status to value 0

const RESET_VALUE: u32 = 0u32

impl Resettable for moondancer_pac::usb0_ep_out::control::CONTROL_SPEC

reset() method sets control to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_out::data::DATA_SPEC

reset() method sets data to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_out::enable::ENABLE_SPEC

reset() method sets enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_out::endpoint::ENDPOINT_SPEC

reset() method sets endpoint to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_out::ev_enable::EV_ENABLE_SPEC

reset() method sets ev_enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_out::ev_pending::EV_PENDING_SPEC

reset() method sets ev_pending to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_out::pid::PID_SPEC

reset() method sets pid to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_out::prime::PRIME_SPEC

reset() method sets prime to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_out::reset::RESET_SPEC

reset() method sets reset to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_out::stall::STALL_SPEC

reset() method sets stall to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb0_ep_out::status::STATUS_SPEC

reset() method sets status to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for moondancer_pac::usb1::control::CONTROL_SPEC

reset() method sets control to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for moondancer_pac::usb1::ev_enable::EV_ENABLE_SPEC

reset() method sets ev_enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1::ev_pending::EV_PENDING_SPEC

reset() method sets ev_pending to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1::status::STATUS_SPEC

reset() method sets status to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_control::control::CONTROL_SPEC

reset() method sets control to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_control::data::DATA_SPEC

reset() method sets data to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_control::ev_enable::EV_ENABLE_SPEC

reset() method sets ev_enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_control::ev_pending::EV_PENDING_SPEC

reset() method sets ev_pending to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_control::reset::RESET_SPEC

reset() method sets reset to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_control::status::STATUS_SPEC

reset() method sets status to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for moondancer_pac::usb1_ep_in::data::DATA_SPEC

reset() method sets data to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_in::endpoint::ENDPOINT_SPEC

reset() method sets endpoint to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_in::ev_enable::EV_ENABLE_SPEC

reset() method sets ev_enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_in::ev_pending::EV_PENDING_SPEC

reset() method sets ev_pending to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_in::pid::PID_SPEC

reset() method sets pid to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_in::reset::RESET_SPEC

reset() method sets reset to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_in::stall::STALL_SPEC

reset() method sets stall to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_in::status::STATUS_SPEC

reset() method sets status to value 0

const RESET_VALUE: u32 = 0u32

impl Resettable for moondancer_pac::usb1_ep_out::control::CONTROL_SPEC

reset() method sets control to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_out::data::DATA_SPEC

reset() method sets data to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_out::enable::ENABLE_SPEC

reset() method sets enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_out::endpoint::ENDPOINT_SPEC

reset() method sets endpoint to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_out::ev_enable::EV_ENABLE_SPEC

reset() method sets ev_enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_out::ev_pending::EV_PENDING_SPEC

reset() method sets ev_pending to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_out::pid::PID_SPEC

reset() method sets pid to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_out::prime::PRIME_SPEC

reset() method sets prime to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_out::reset::RESET_SPEC

reset() method sets reset to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_out::stall::STALL_SPEC

reset() method sets stall to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb1_ep_out::status::STATUS_SPEC

reset() method sets status to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for moondancer_pac::usb2::control::CONTROL_SPEC

reset() method sets control to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for moondancer_pac::usb2::ev_enable::EV_ENABLE_SPEC

reset() method sets ev_enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2::ev_pending::EV_PENDING_SPEC

reset() method sets ev_pending to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2::status::STATUS_SPEC

reset() method sets status to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_control::control::CONTROL_SPEC

reset() method sets control to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_control::data::DATA_SPEC

reset() method sets data to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_control::ev_enable::EV_ENABLE_SPEC

reset() method sets ev_enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_control::ev_pending::EV_PENDING_SPEC

reset() method sets ev_pending to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_control::reset::RESET_SPEC

reset() method sets reset to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_control::status::STATUS_SPEC

reset() method sets status to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for moondancer_pac::usb2_ep_in::data::DATA_SPEC

reset() method sets data to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_in::endpoint::ENDPOINT_SPEC

reset() method sets endpoint to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_in::ev_enable::EV_ENABLE_SPEC

reset() method sets ev_enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_in::ev_pending::EV_PENDING_SPEC

reset() method sets ev_pending to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_in::pid::PID_SPEC

reset() method sets pid to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_in::reset::RESET_SPEC

reset() method sets reset to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_in::stall::STALL_SPEC

reset() method sets stall to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_in::status::STATUS_SPEC

reset() method sets status to value 0

const RESET_VALUE: u32 = 0u32

impl Resettable for moondancer_pac::usb2_ep_out::control::CONTROL_SPEC

reset() method sets control to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_out::data::DATA_SPEC

reset() method sets data to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_out::enable::ENABLE_SPEC

reset() method sets enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_out::endpoint::ENDPOINT_SPEC

reset() method sets endpoint to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_out::ev_enable::EV_ENABLE_SPEC

reset() method sets ev_enable to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_out::ev_pending::EV_PENDING_SPEC

reset() method sets ev_pending to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_out::pid::PID_SPEC

reset() method sets pid to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_out::prime::PRIME_SPEC

reset() method sets prime to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_out::reset::RESET_SPEC

reset() method sets reset to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_out::stall::STALL_SPEC

reset() method sets stall to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::usb2_ep_out::status::STATUS_SPEC

reset() method sets status to value 0

const RESET_VALUE: u16 = 0u16

impl Resettable for moondancer_pac::user0::input::INPUT_SPEC

reset() method sets Input to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::user0::mode::MODE_SPEC

reset() method sets Mode to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::user0::output::OUTPUT_SPEC

reset() method sets Output to value 0

const RESET_VALUE: u8 = 0u8

impl Resettable for moondancer_pac::user0::set_clr::SET_CLR_SPEC

reset() method sets SetClr to value 0

const RESET_VALUE: u8 = 0u8