[−][src]Enum lpc82x_pac::adc0::seq_ctrl::SYNCBYPASS_A
Setting this bit allows the hardware trigger input to bypass synchronization flip-flop stages and therefore shorten the time between the trigger input signal and the start of a conversion. There are slightly different criteria for whether or not this bit can be set depending on the clock operating mode: Synchronous mode (the ASYNMODE in the CTRL register = 0): Synchronization may be bypassed (this bit may be set) if the selected trigger source is already synchronous with the main system clock (eg. coming from an on-chip, system-clock-based timer). Whether this bit is set or not, a trigger pulse must be maintained for at least one system clock period. Asynchronous mode (the ASYNMODE in the CTRL register = 1): Synchronization may be bypassed (this bit may be set) if it is certain that the duration of a trigger input pulse will be at least one cycle of the ADC clock (regardless of whether the trigger comes from and on-chip or off-chip source). If this bit is NOT set, the trigger pulse must at least be maintained for one system clock period.
Value on reset: 0
Variants
0: Enable trigger synchronization. The hardware trigger bypass is not enabled.
1: Bypass trigger synchronization. The hardware trigger bypass is enabled.
Trait Implementations
impl From<SYNCBYPASS_A> for bool
[src]
fn from(variant: SYNCBYPASS_A) -> Self
[src]
impl Debug for SYNCBYPASS_A
[src]
impl PartialEq<SYNCBYPASS_A> for SYNCBYPASS_A
[src]
fn eq(&self, other: &SYNCBYPASS_A) -> bool
[src]
#[must_use]
fn ne(&self, other: &Rhs) -> bool
1.0.0[src]
impl Copy for SYNCBYPASS_A
[src]
impl Clone for SYNCBYPASS_A
[src]
fn clone(&self) -> SYNCBYPASS_A
[src]
fn clone_from(&mut self, source: &Self)
1.0.0[src]
Auto Trait Implementations
Blanket Implementations
impl<T> From<T> for T
[src]
impl<T, U> TryFrom<U> for T where
U: Into<T>,
[src]
U: Into<T>,
type Error = Infallible
The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
impl<T, U> Into<U> for T where
U: From<T>,
[src]
U: From<T>,
impl<T, U> TryInto<U> for T where
U: TryFrom<T>,
[src]
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
impl<T> Borrow<T> for T where
T: ?Sized,
[src]
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
[src]
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
impl<T> Any for T where
T: 'static + ?Sized,
[src]
T: 'static + ?Sized,
impl<T> Same<T> for T
type Output = T
Should always be Self