Struct lpc81x_pac::lpc810::swm0::pinenable0::W

impl W

pub fn acmp_i1(&mut self) -> ACMP_I1_W<'_, 0>

Bit 0 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed–pin function is deselected and GPIO is assigned to this pin.

pub fn acmp_i2(&mut self) -> ACMP_I2_W<'_, 1>

Bit 1 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed-pin function is deselected and GPIO is assigned to this pin. Functions CLKIN and ACMP_I2 are connected to the same pin PIO0_1. To use ACMP_I2, disable the CLKIN function in bit 7 of this register and enable ACMP_I2.

pub fn swclk(&mut self) -> SWCLK_W<'_, 2>

Bit 2 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. This function is selected by default.

pub fn swdio(&mut self) -> SWDIO_W<'_, 3>

Bit 3 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. This function is selected by default.

pub fn xtalin(&mut self) -> XTALIN_W<'_, 4>

Bit 4 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed–pin function is deselected and GPIO is assigned to this pin.

pub fn xtalout(&mut self) -> XTALOUT_W<'_, 5>

Bit 5 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed–pin function is deselected and GPIO is assigned to this pin.

pub fn resetn(&mut self) -> RESETN_W<'_, 6>

Bit 6 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. This function is selected by default.

pub fn clkin(&mut self) -> CLKIN_W<'_, 7>

Bit 7 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed-pin function is deselected and GPIO is assigned to this pin. Functions CLKIN and ACMP_I2 are connected to the same pin PIO0_1. To use CLKIN, disable ACMP_I2 in bit 1 of this register and enable CLKIN.

pub fn vddcmp(&mut self) -> VDDCMP_W<'_, 8>

Bit 8 - Enables fixed-pin function. Writing a 1 deselects the function and any movable function can be assigned to this pin. By default the fixed–pin function is deselected and GPIO is assigned to this pin.

pub unsafe fn bits(&mut self, bits: u32) -> &mut Self

Writes raw bits to the register.

Methods from Deref<Target = W<PINENABLE0_SPEC>>§

pub unsafe fn bits(&mut self, bits: REG::Ux) -> &mut Self

Writes raw bits to the register.

Examples found in repository ?

src/lpc810/gpio/b0_0.rs (line 57)

    pub unsafe fn bits(&mut self, bits: u8) -> &mut Self {
        self.0.bits(bits);
        self
    }

More examples

Hide additional examples

src/lpc810/gpio/b0_1.rs (line 57)

    pub unsafe fn bits(&mut self, bits: u8) -> &mut Self {
        self.0.bits(bits);
        self
    }

src/lpc810/gpio/b0_10.rs (line 57)

    pub unsafe fn bits(&mut self, bits: u8) -> &mut Self {
        self.0.bits(bits);
        self
    }

src/lpc810/gpio/b0_11.rs (line 57)

    pub unsafe fn bits(&mut self, bits: u8) -> &mut Self {
        self.0.bits(bits);
        self
    }

src/lpc810/gpio/b0_12.rs (line 57)

    pub unsafe fn bits(&mut self, bits: u8) -> &mut Self {
        self.0.bits(bits);
        self
    }

src/lpc810/gpio/b0_13.rs (line 57)

    pub unsafe fn bits(&mut self, bits: u8) -> &mut Self {
        self.0.bits(bits);
        self
    }

Additional examples can be found in:

Trait Implementations§

impl Deref for W

type Target = W<PINENABLE0_SPEC>

The resulting type after dereferencing.

fn deref(&self) -> &Self::Target

Dereferences the value.

impl DerefMut for W

fn deref_mut(&mut self) -> &mut Self::Target

Mutably dereferences the value.

impl From<W<PINENABLE0_SPEC>> for W

fn from(writer: W<PINENABLE0_SPEC>) -> Self

Converts to this type from the input type.

Auto Trait Implementations§

impl UnwindSafe for W

Blanket Implementations§

impl<T> Any for Twhere
T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for Twhere
T: ?Sized,

const: unstable · source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for Twhere
T: ?Sized,

const: unstable · source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> From<T> for T

const: unstable · source§

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into for Twhere
U: From<T>,

const: unstable · source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T, U> TryFrom for Twhere
U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

const: unstable · source§

fn try_from(value: U) -> Result<T, <T as TryFrom>::Error>

Performs the conversion.

impl<T, U> TryInto for Twhere
U: TryFrom<T>,