#[doc = "Register `STAT` reader"]
pub struct R(crate::R<STAT_SPEC>);
impl core::ops::Deref for R {
    type Target = crate::R<STAT_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl From<crate::R<STAT_SPEC>> for R {
    #[inline(always)]
    fn from(reader: crate::R<STAT_SPEC>) -> Self {
        R(reader)
    }
}
#[doc = "Register `STAT` writer"]
pub struct W(crate::W<STAT_SPEC>);
impl core::ops::Deref for W {
    type Target = crate::W<STAT_SPEC>;
    #[inline(always)]
    fn deref(&self) -> &Self::Target {
        &self.0
    }
}
impl core::ops::DerefMut for W {
    #[inline(always)]
    fn deref_mut(&mut self) -> &mut Self::Target {
        &mut self.0
    }
}
impl From<crate::W<STAT_SPEC>> for W {
    #[inline(always)]
    fn from(writer: crate::W<STAT_SPEC>) -> Self {
        W(writer)
    }
}
#[doc = "Field `MSTPENDING` reader - Master Pending. Indicates that the Master is waiting to continue communication on the I2C-bus (pending) or is idle. When the master is pending, the MSTSTATE bits indicate what type of software service if any the master expects. This flag will cause an interrupt when set if, enabled via the INTENSET register. The MSTPENDING flag is not set when the DMA is handling an event (if the MSTDMA bit in the MSTCTL register is set). If the master is in the idle state, and no communication is needed, mask this interrupt."]
pub type MSTPENDING_R = crate::BitReader<MSTPENDING_A>;
#[doc = "Master Pending. Indicates that the Master is waiting to continue communication on the I2C-bus (pending) or is idle. When the master is pending, the MSTSTATE bits indicate what type of software service if any the master expects. This flag will cause an interrupt when set if, enabled via the INTENSET register. The MSTPENDING flag is not set when the DMA is handling an event (if the MSTDMA bit in the MSTCTL register is set). If the master is in the idle state, and no communication is needed, mask this interrupt.\n\nValue on reset: 1"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum MSTPENDING_A {
    #[doc = "0: In progress. Communication is in progress and the Master function is busy and cannot currently accept a command."]
    IN_PROGRESS = 0,
    #[doc = "1: Pending. The Master function needs software service or is in the idle state. If the master is not in the idle state, it is waiting to receive or transmit data or the NACK bit."]
    PENDING = 1,
}
impl From<MSTPENDING_A> for bool {
    #[inline(always)]
    fn from(variant: MSTPENDING_A) -> Self {
        variant as u8 != 0
    }
}
impl MSTPENDING_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> MSTPENDING_A {
        match self.bits {
            false => MSTPENDING_A::IN_PROGRESS,
            true => MSTPENDING_A::PENDING,
        }
    }
    #[doc = "Checks if the value of the field is `IN_PROGRESS`"]
    #[inline(always)]
    pub fn is_in_progress(&self) -> bool {
        *self == MSTPENDING_A::IN_PROGRESS
    }
    #[doc = "Checks if the value of the field is `PENDING`"]
    #[inline(always)]
    pub fn is_pending(&self) -> bool {
        *self == MSTPENDING_A::PENDING
    }
}
#[doc = "Field `MSTSTATE` reader - Master State code. The master state code reflects the master state when the MSTPENDING bit is set, that is the master is pending or in the idle state. Each value of this field indicates a specific required service for the Master function. All other values are reserved. See Table 400 for details of state values and appropriate responses."]
pub type MSTSTATE_R = crate::FieldReader<u8, MSTSTATE_A>;
#[doc = "Master State code. The master state code reflects the master state when the MSTPENDING bit is set, that is the master is pending or in the idle state. Each value of this field indicates a specific required service for the Master function. All other values are reserved. See Table 400 for details of state values and appropriate responses.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum MSTSTATE_A {
    #[doc = "0: Idle. The Master function is available to be used for a new transaction."]
    IDLE = 0,
    #[doc = "1: Receive ready. Received data available (Master Receiver mode). Address plus Read was previously sent and Acknowledged by slave."]
    RECEIVE_READY = 1,
    #[doc = "2: Transmit ready. Data can be transmitted (Master Transmitter mode). Address plus Write was previously sent and Acknowledged by slave."]
    TRANSMIT_READY = 2,
    #[doc = "3: NACK Address. Slave NACKed address."]
    NACK_ADDRESS = 3,
    #[doc = "4: NACK Data. Slave NACKed transmitted data."]
    NACK_DATA = 4,
}
impl From<MSTSTATE_A> for u8 {
    #[inline(always)]
    fn from(variant: MSTSTATE_A) -> Self {
        variant as _
    }
}
impl MSTSTATE_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> Option<MSTSTATE_A> {
        match self.bits {
            0 => Some(MSTSTATE_A::IDLE),
            1 => Some(MSTSTATE_A::RECEIVE_READY),
            2 => Some(MSTSTATE_A::TRANSMIT_READY),
            3 => Some(MSTSTATE_A::NACK_ADDRESS),
            4 => Some(MSTSTATE_A::NACK_DATA),
            _ => None,
        }
    }
    #[doc = "Checks if the value of the field is `IDLE`"]
    #[inline(always)]
    pub fn is_idle(&self) -> bool {
        *self == MSTSTATE_A::IDLE
    }
    #[doc = "Checks if the value of the field is `RECEIVE_READY`"]
    #[inline(always)]
    pub fn is_receive_ready(&self) -> bool {
        *self == MSTSTATE_A::RECEIVE_READY
    }
    #[doc = "Checks if the value of the field is `TRANSMIT_READY`"]
    #[inline(always)]
    pub fn is_transmit_ready(&self) -> bool {
        *self == MSTSTATE_A::TRANSMIT_READY
    }
    #[doc = "Checks if the value of the field is `NACK_ADDRESS`"]
    #[inline(always)]
    pub fn is_nack_address(&self) -> bool {
        *self == MSTSTATE_A::NACK_ADDRESS
    }
    #[doc = "Checks if the value of the field is `NACK_DATA`"]
    #[inline(always)]
    pub fn is_nack_data(&self) -> bool {
        *self == MSTSTATE_A::NACK_DATA
    }
}
#[doc = "Field `MSTARBLOSS` reader - Master Arbitration Loss flag. This flag can be cleared by software writing a 1 to this bit. It is also cleared automatically a 1 is written to MSTCONTINUE."]
pub type MSTARBLOSS_R = crate::BitReader<MSTARBLOSS_A>;
#[doc = "Master Arbitration Loss flag. This flag can be cleared by software writing a 1 to this bit. It is also cleared automatically a 1 is written to MSTCONTINUE.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum MSTARBLOSS_A {
    #[doc = "0: No Arbitration Loss has occurred."]
    NO_LOSS = 0,
    #[doc = "1: Arbitration loss. The Master function has experienced an Arbitration Loss. At this point, the Master function has already stopped driving the bus and gone to an idle state. Software can respond by doing nothing, or by sending a Start in order to attempt to gain control of the bus when it next becomes idle."]
    ARBITRATION_LOSS = 1,
}
impl From<MSTARBLOSS_A> for bool {
    #[inline(always)]
    fn from(variant: MSTARBLOSS_A) -> Self {
        variant as u8 != 0
    }
}
impl MSTARBLOSS_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> MSTARBLOSS_A {
        match self.bits {
            false => MSTARBLOSS_A::NO_LOSS,
            true => MSTARBLOSS_A::ARBITRATION_LOSS,
        }
    }
    #[doc = "Checks if the value of the field is `NO_LOSS`"]
    #[inline(always)]
    pub fn is_no_loss(&self) -> bool {
        *self == MSTARBLOSS_A::NO_LOSS
    }
    #[doc = "Checks if the value of the field is `ARBITRATION_LOSS`"]
    #[inline(always)]
    pub fn is_arbitration_loss(&self) -> bool {
        *self == MSTARBLOSS_A::ARBITRATION_LOSS
    }
}
#[doc = "Field `MSTARBLOSS` writer - Master Arbitration Loss flag. This flag can be cleared by software writing a 1 to this bit. It is also cleared automatically a 1 is written to MSTCONTINUE."]
pub type MSTARBLOSS_W<'a, const O: u8> = crate::BitWriter<'a, u32, STAT_SPEC, MSTARBLOSS_A, O>;
impl<'a, const O: u8> MSTARBLOSS_W<'a, O> {
    #[doc = "No Arbitration Loss has occurred."]
    #[inline(always)]
    pub fn no_loss(self) -> &'a mut W {
        self.variant(MSTARBLOSS_A::NO_LOSS)
    }
    #[doc = "Arbitration loss. The Master function has experienced an Arbitration Loss. At this point, the Master function has already stopped driving the bus and gone to an idle state. Software can respond by doing nothing, or by sending a Start in order to attempt to gain control of the bus when it next becomes idle."]
    #[inline(always)]
    pub fn arbitration_loss(self) -> &'a mut W {
        self.variant(MSTARBLOSS_A::ARBITRATION_LOSS)
    }
}
#[doc = "Field `MSTSTSTPERR` reader - Master Start/Stop Error flag. This flag can be cleared by software writing a 1 to this bit. It is also cleared automatically a 1 is written to MSTCONTINUE."]
pub type MSTSTSTPERR_R = crate::BitReader<MSTSTSTPERR_A>;
#[doc = "Master Start/Stop Error flag. This flag can be cleared by software writing a 1 to this bit. It is also cleared automatically a 1 is written to MSTCONTINUE.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum MSTSTSTPERR_A {
    #[doc = "0: No Start/Stop Error has occurred."]
    NO_ERROR = 0,
    #[doc = "1: The Master function has experienced a Start/Stop Error. A Start or Stop was detected at a time when it is not allowed by the I2C specification. The Master interface has stopped driving the bus and gone to an idle state, no action is required. A request for a Start could be made, or software could attempt to insure that the bus has not stalled."]
    ERROR = 1,
}
impl From<MSTSTSTPERR_A> for bool {
    #[inline(always)]
    fn from(variant: MSTSTSTPERR_A) -> Self {
        variant as u8 != 0
    }
}
impl MSTSTSTPERR_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> MSTSTSTPERR_A {
        match self.bits {
            false => MSTSTSTPERR_A::NO_ERROR,
            true => MSTSTSTPERR_A::ERROR,
        }
    }
    #[doc = "Checks if the value of the field is `NO_ERROR`"]
    #[inline(always)]
    pub fn is_no_error(&self) -> bool {
        *self == MSTSTSTPERR_A::NO_ERROR
    }
    #[doc = "Checks if the value of the field is `ERROR`"]
    #[inline(always)]
    pub fn is_error(&self) -> bool {
        *self == MSTSTSTPERR_A::ERROR
    }
}
#[doc = "Field `MSTSTSTPERR` writer - Master Start/Stop Error flag. This flag can be cleared by software writing a 1 to this bit. It is also cleared automatically a 1 is written to MSTCONTINUE."]
pub type MSTSTSTPERR_W<'a, const O: u8> = crate::BitWriter<'a, u32, STAT_SPEC, MSTSTSTPERR_A, O>;
impl<'a, const O: u8> MSTSTSTPERR_W<'a, O> {
    #[doc = "No Start/Stop Error has occurred."]
    #[inline(always)]
    pub fn no_error(self) -> &'a mut W {
        self.variant(MSTSTSTPERR_A::NO_ERROR)
    }
    #[doc = "The Master function has experienced a Start/Stop Error. A Start or Stop was detected at a time when it is not allowed by the I2C specification. The Master interface has stopped driving the bus and gone to an idle state, no action is required. A request for a Start could be made, or software could attempt to insure that the bus has not stalled."]
    #[inline(always)]
    pub fn error(self) -> &'a mut W {
        self.variant(MSTSTSTPERR_A::ERROR)
    }
}
#[doc = "Field `SLVPENDING` reader - Slave Pending. Indicates that the Slave function is waiting to continue communication on the I2C-bus and needs software service. This flag will cause an interrupt when set if enabled via INTENSET. The SLVPENDING flag is not set when the DMA is handling an event (if the SLVDMA bit in the SLVCTL register is set). The SLVPENDING flag is read-only and is automatically cleared when a 1 is written to the SLVCONTINUE bit in the SLVCTL register. The point in time when SlvPending is set depends on whether the I2C interface is in HSCAPABLE mode. See Section 25.7.2.2.2. When the I2C interface is configured to be HSCAPABLE, HS master codes are detected automatically. Due to the requirements of the HS I2C specification, slave addresses must also be detected automatically, since the address must be acknowledged before the clock can be stretched."]
pub type SLVPENDING_R = crate::BitReader<SLVPENDING_A>;
#[doc = "Slave Pending. Indicates that the Slave function is waiting to continue communication on the I2C-bus and needs software service. This flag will cause an interrupt when set if enabled via INTENSET. The SLVPENDING flag is not set when the DMA is handling an event (if the SLVDMA bit in the SLVCTL register is set). The SLVPENDING flag is read-only and is automatically cleared when a 1 is written to the SLVCONTINUE bit in the SLVCTL register. The point in time when SlvPending is set depends on whether the I2C interface is in HSCAPABLE mode. See Section 25.7.2.2.2. When the I2C interface is configured to be HSCAPABLE, HS master codes are detected automatically. Due to the requirements of the HS I2C specification, slave addresses must also be detected automatically, since the address must be acknowledged before the clock can be stretched.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum SLVPENDING_A {
    #[doc = "0: In progress. The Slave function does not currently need service."]
    IN_PROGRESS = 0,
    #[doc = "1: Pending. The Slave function needs service. Information on what is needed can be found in the adjacent SLVSTATE field."]
    PENDING = 1,
}
impl From<SLVPENDING_A> for bool {
    #[inline(always)]
    fn from(variant: SLVPENDING_A) -> Self {
        variant as u8 != 0
    }
}
impl SLVPENDING_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> SLVPENDING_A {
        match self.bits {
            false => SLVPENDING_A::IN_PROGRESS,
            true => SLVPENDING_A::PENDING,
        }
    }
    #[doc = "Checks if the value of the field is `IN_PROGRESS`"]
    #[inline(always)]
    pub fn is_in_progress(&self) -> bool {
        *self == SLVPENDING_A::IN_PROGRESS
    }
    #[doc = "Checks if the value of the field is `PENDING`"]
    #[inline(always)]
    pub fn is_pending(&self) -> bool {
        *self == SLVPENDING_A::PENDING
    }
}
#[doc = "Field `SLVSTATE` reader - Slave State code. Each value of this field indicates a specific required service for the Slave function. All other values are reserved. See Table 401 for state values and actions. note that the occurrence of some states and how they are handled are affected by DMA mode and Automatic Operation modes."]
pub type SLVSTATE_R = crate::FieldReader<u8, SLVSTATE_A>;
#[doc = "Slave State code. Each value of this field indicates a specific required service for the Slave function. All other values are reserved. See Table 401 for state values and actions. note that the occurrence of some states and how they are handled are affected by DMA mode and Automatic Operation modes.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum SLVSTATE_A {
    #[doc = "0: Slave address. Address plus R/W received. At least one of the four slave addresses has been matched by hardware."]
    SLAVE_ADDRESS = 0,
    #[doc = "1: Slave receive. Received data is available (Slave Receiver mode)."]
    SLAVE_RECEIVE = 1,
    #[doc = "2: Slave transmit. Data can be transmitted (Slave Transmitter mode)."]
    SLAVE_TRANSMIT = 2,
}
impl From<SLVSTATE_A> for u8 {
    #[inline(always)]
    fn from(variant: SLVSTATE_A) -> Self {
        variant as _
    }
}
impl SLVSTATE_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> Option<SLVSTATE_A> {
        match self.bits {
            0 => Some(SLVSTATE_A::SLAVE_ADDRESS),
            1 => Some(SLVSTATE_A::SLAVE_RECEIVE),
            2 => Some(SLVSTATE_A::SLAVE_TRANSMIT),
            _ => None,
        }
    }
    #[doc = "Checks if the value of the field is `SLAVE_ADDRESS`"]
    #[inline(always)]
    pub fn is_slave_address(&self) -> bool {
        *self == SLVSTATE_A::SLAVE_ADDRESS
    }
    #[doc = "Checks if the value of the field is `SLAVE_RECEIVE`"]
    #[inline(always)]
    pub fn is_slave_receive(&self) -> bool {
        *self == SLVSTATE_A::SLAVE_RECEIVE
    }
    #[doc = "Checks if the value of the field is `SLAVE_TRANSMIT`"]
    #[inline(always)]
    pub fn is_slave_transmit(&self) -> bool {
        *self == SLVSTATE_A::SLAVE_TRANSMIT
    }
}
#[doc = "Field `SLVNOTSTR` reader - Slave Not Stretching. Indicates when the slave function is stretching the I2C clock. This is needed in order to gracefully invoke Deep Sleep or Power-down modes during slave operation. This read-only flag reflects the slave function status in real time."]
pub type SLVNOTSTR_R = crate::BitReader<SLVNOTSTR_A>;
#[doc = "Slave Not Stretching. Indicates when the slave function is stretching the I2C clock. This is needed in order to gracefully invoke Deep Sleep or Power-down modes during slave operation. This read-only flag reflects the slave function status in real time.\n\nValue on reset: 1"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum SLVNOTSTR_A {
    #[doc = "0: Stretching. The slave function is currently stretching the I2C bus clock. Deep-Sleep or Power-down mode cannot be entered at this time."]
    STRETCHING = 0,
    #[doc = "1: Not stretching. The slave function is not currently stretching the I 2C bus clock. Deep-sleep or Power-down mode could be entered at this time."]
    NOT_STRETCHING = 1,
}
impl From<SLVNOTSTR_A> for bool {
    #[inline(always)]
    fn from(variant: SLVNOTSTR_A) -> Self {
        variant as u8 != 0
    }
}
impl SLVNOTSTR_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> SLVNOTSTR_A {
        match self.bits {
            false => SLVNOTSTR_A::STRETCHING,
            true => SLVNOTSTR_A::NOT_STRETCHING,
        }
    }
    #[doc = "Checks if the value of the field is `STRETCHING`"]
    #[inline(always)]
    pub fn is_stretching(&self) -> bool {
        *self == SLVNOTSTR_A::STRETCHING
    }
    #[doc = "Checks if the value of the field is `NOT_STRETCHING`"]
    #[inline(always)]
    pub fn is_not_stretching(&self) -> bool {
        *self == SLVNOTSTR_A::NOT_STRETCHING
    }
}
#[doc = "Field `SLVIDX` reader - Slave address match Index. This field is valid when the I2C slave function has been selected by receiving an address that matches one of the slave addresses defined by any enabled slave address registers, and provides an identification of the address that was matched. It is possible that more than one address could be matched, but only one match can be reported here."]
pub type SLVIDX_R = crate::FieldReader<u8, SLVIDX_A>;
#[doc = "Slave address match Index. This field is valid when the I2C slave function has been selected by receiving an address that matches one of the slave addresses defined by any enabled slave address registers, and provides an identification of the address that was matched. It is possible that more than one address could be matched, but only one match can be reported here.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum SLVIDX_A {
    #[doc = "0: Address 0. Slave address 0 was matched."]
    ADDRESS0 = 0,
    #[doc = "1: Address 1. Slave address 1 was matched."]
    ADDRESS1 = 1,
    #[doc = "2: Address 2. Slave address 2 was matched."]
    ADDRESS2 = 2,
    #[doc = "3: Address 3. Slave address 3 was matched."]
    ADDRESS3 = 3,
}
impl From<SLVIDX_A> for u8 {
    #[inline(always)]
    fn from(variant: SLVIDX_A) -> Self {
        variant as _
    }
}
impl SLVIDX_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> SLVIDX_A {
        match self.bits {
            0 => SLVIDX_A::ADDRESS0,
            1 => SLVIDX_A::ADDRESS1,
            2 => SLVIDX_A::ADDRESS2,
            3 => SLVIDX_A::ADDRESS3,
            _ => unreachable!(),
        }
    }
    #[doc = "Checks if the value of the field is `ADDRESS0`"]
    #[inline(always)]
    pub fn is_address0(&self) -> bool {
        *self == SLVIDX_A::ADDRESS0
    }
    #[doc = "Checks if the value of the field is `ADDRESS1`"]
    #[inline(always)]
    pub fn is_address1(&self) -> bool {
        *self == SLVIDX_A::ADDRESS1
    }
    #[doc = "Checks if the value of the field is `ADDRESS2`"]
    #[inline(always)]
    pub fn is_address2(&self) -> bool {
        *self == SLVIDX_A::ADDRESS2
    }
    #[doc = "Checks if the value of the field is `ADDRESS3`"]
    #[inline(always)]
    pub fn is_address3(&self) -> bool {
        *self == SLVIDX_A::ADDRESS3
    }
}
#[doc = "Field `SLVSEL` reader - Slave selected flag. SLVSEL is set after an address match when software tells the Slave function to acknowledge the address, or when the address has been automatically acknowledged. It is cleared when another address cycle presents an address that does not match an enabled address on the Slave function, when slave software decides to NACK a matched address, when there is a Stop detected on the bus, when the master NACKs slave data, and in some combinations of Automatic Operation. SLVSEL is not cleared if software NACKs data."]
pub type SLVSEL_R = crate::BitReader<SLVSEL_A>;
#[doc = "Slave selected flag. SLVSEL is set after an address match when software tells the Slave function to acknowledge the address, or when the address has been automatically acknowledged. It is cleared when another address cycle presents an address that does not match an enabled address on the Slave function, when slave software decides to NACK a matched address, when there is a Stop detected on the bus, when the master NACKs slave data, and in some combinations of Automatic Operation. SLVSEL is not cleared if software NACKs data.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum SLVSEL_A {
    #[doc = "0: Not selected. The Slave function is not currently selected."]
    NOT_SELECTED = 0,
    #[doc = "1: Selected. The Slave function is currently selected."]
    SELECTED = 1,
}
impl From<SLVSEL_A> for bool {
    #[inline(always)]
    fn from(variant: SLVSEL_A) -> Self {
        variant as u8 != 0
    }
}
impl SLVSEL_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> SLVSEL_A {
        match self.bits {
            false => SLVSEL_A::NOT_SELECTED,
            true => SLVSEL_A::SELECTED,
        }
    }
    #[doc = "Checks if the value of the field is `NOT_SELECTED`"]
    #[inline(always)]
    pub fn is_not_selected(&self) -> bool {
        *self == SLVSEL_A::NOT_SELECTED
    }
    #[doc = "Checks if the value of the field is `SELECTED`"]
    #[inline(always)]
    pub fn is_selected(&self) -> bool {
        *self == SLVSEL_A::SELECTED
    }
}
#[doc = "Field `SLVDESEL` reader - Slave Deselected flag. This flag will cause an interrupt when set if enabled via INTENSET. This flag can be cleared by writing a 1 to this bit."]
pub type SLVDESEL_R = crate::BitReader<SLVDESEL_A>;
#[doc = "Slave Deselected flag. This flag will cause an interrupt when set if enabled via INTENSET. This flag can be cleared by writing a 1 to this bit.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum SLVDESEL_A {
    #[doc = "0: Not deselected. The Slave function has not become deselected. This does not mean that it is currently selected. That information can be found in the SLVSEL flag."]
    NOT_DESELECTED = 0,
    #[doc = "1: Deselected. The Slave function has become deselected. This is specifically caused by the SLVSEL flag changing from 1 to 0. See the description of SLVSEL for details on when that event occurs."]
    DESELECTED = 1,
}
impl From<SLVDESEL_A> for bool {
    #[inline(always)]
    fn from(variant: SLVDESEL_A) -> Self {
        variant as u8 != 0
    }
}
impl SLVDESEL_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> SLVDESEL_A {
        match self.bits {
            false => SLVDESEL_A::NOT_DESELECTED,
            true => SLVDESEL_A::DESELECTED,
        }
    }
    #[doc = "Checks if the value of the field is `NOT_DESELECTED`"]
    #[inline(always)]
    pub fn is_not_deselected(&self) -> bool {
        *self == SLVDESEL_A::NOT_DESELECTED
    }
    #[doc = "Checks if the value of the field is `DESELECTED`"]
    #[inline(always)]
    pub fn is_deselected(&self) -> bool {
        *self == SLVDESEL_A::DESELECTED
    }
}
#[doc = "Field `SLVDESEL` writer - Slave Deselected flag. This flag will cause an interrupt when set if enabled via INTENSET. This flag can be cleared by writing a 1 to this bit."]
pub type SLVDESEL_W<'a, const O: u8> = crate::BitWriter<'a, u32, STAT_SPEC, SLVDESEL_A, O>;
impl<'a, const O: u8> SLVDESEL_W<'a, O> {
    #[doc = "Not deselected. The Slave function has not become deselected. This does not mean that it is currently selected. That information can be found in the SLVSEL flag."]
    #[inline(always)]
    pub fn not_deselected(self) -> &'a mut W {
        self.variant(SLVDESEL_A::NOT_DESELECTED)
    }
    #[doc = "Deselected. The Slave function has become deselected. This is specifically caused by the SLVSEL flag changing from 1 to 0. See the description of SLVSEL for details on when that event occurs."]
    #[inline(always)]
    pub fn deselected(self) -> &'a mut W {
        self.variant(SLVDESEL_A::DESELECTED)
    }
}
#[doc = "Field `MONRDY` reader - Monitor Ready. This flag is cleared when the MONRXDAT register is read."]
pub type MONRDY_R = crate::BitReader<MONRDY_A>;
#[doc = "Monitor Ready. This flag is cleared when the MONRXDAT register is read.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum MONRDY_A {
    #[doc = "0: No data. The Monitor function does not currently have data available."]
    NO_DATA = 0,
    #[doc = "1: Data waiting. The Monitor function has data waiting to be read."]
    DATA_WAITING = 1,
}
impl From<MONRDY_A> for bool {
    #[inline(always)]
    fn from(variant: MONRDY_A) -> Self {
        variant as u8 != 0
    }
}
impl MONRDY_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> MONRDY_A {
        match self.bits {
            false => MONRDY_A::NO_DATA,
            true => MONRDY_A::DATA_WAITING,
        }
    }
    #[doc = "Checks if the value of the field is `NO_DATA`"]
    #[inline(always)]
    pub fn is_no_data(&self) -> bool {
        *self == MONRDY_A::NO_DATA
    }
    #[doc = "Checks if the value of the field is `DATA_WAITING`"]
    #[inline(always)]
    pub fn is_data_waiting(&self) -> bool {
        *self == MONRDY_A::DATA_WAITING
    }
}
#[doc = "Field `MONOV` reader - Monitor Overflow flag."]
pub type MONOV_R = crate::BitReader<MONOV_A>;
#[doc = "Monitor Overflow flag.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum MONOV_A {
    #[doc = "0: No overrun. Monitor data has not overrun."]
    NO_OVERRUN = 0,
    #[doc = "1: Overrun. A Monitor data overrun has occurred. This can only happen when Monitor clock stretching not enabled via the MONCLKSTR bit in the CFG register. Writing 1 to this bit clears the flag."]
    OVERRUN = 1,
}
impl From<MONOV_A> for bool {
    #[inline(always)]
    fn from(variant: MONOV_A) -> Self {
        variant as u8 != 0
    }
}
impl MONOV_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> MONOV_A {
        match self.bits {
            false => MONOV_A::NO_OVERRUN,
            true => MONOV_A::OVERRUN,
        }
    }
    #[doc = "Checks if the value of the field is `NO_OVERRUN`"]
    #[inline(always)]
    pub fn is_no_overrun(&self) -> bool {
        *self == MONOV_A::NO_OVERRUN
    }
    #[doc = "Checks if the value of the field is `OVERRUN`"]
    #[inline(always)]
    pub fn is_overrun(&self) -> bool {
        *self == MONOV_A::OVERRUN
    }
}
#[doc = "Field `MONOV` writer - Monitor Overflow flag."]
pub type MONOV_W<'a, const O: u8> = crate::BitWriter<'a, u32, STAT_SPEC, MONOV_A, O>;
impl<'a, const O: u8> MONOV_W<'a, O> {
    #[doc = "No overrun. Monitor data has not overrun."]
    #[inline(always)]
    pub fn no_overrun(self) -> &'a mut W {
        self.variant(MONOV_A::NO_OVERRUN)
    }
    #[doc = "Overrun. A Monitor data overrun has occurred. This can only happen when Monitor clock stretching not enabled via the MONCLKSTR bit in the CFG register. Writing 1 to this bit clears the flag."]
    #[inline(always)]
    pub fn overrun(self) -> &'a mut W {
        self.variant(MONOV_A::OVERRUN)
    }
}
#[doc = "Field `MONACTIVE` reader - Monitor Active flag. Indicates when the Monitor function considers the I 2C bus to be active. Active is defined here as when some Master is on the bus: a bus Start has occurred more recently than a bus Stop."]
pub type MONACTIVE_R = crate::BitReader<MONACTIVE_A>;
#[doc = "Monitor Active flag. Indicates when the Monitor function considers the I 2C bus to be active. Active is defined here as when some Master is on the bus: a bus Start has occurred more recently than a bus Stop.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum MONACTIVE_A {
    #[doc = "0: Inactive. The Monitor function considers the I2C bus to be inactive."]
    INACTIVE = 0,
    #[doc = "1: Active. The Monitor function considers the I2C bus to be active."]
    ACTIVE = 1,
}
impl From<MONACTIVE_A> for bool {
    #[inline(always)]
    fn from(variant: MONACTIVE_A) -> Self {
        variant as u8 != 0
    }
}
impl MONACTIVE_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> MONACTIVE_A {
        match self.bits {
            false => MONACTIVE_A::INACTIVE,
            true => MONACTIVE_A::ACTIVE,
        }
    }
    #[doc = "Checks if the value of the field is `INACTIVE`"]
    #[inline(always)]
    pub fn is_inactive(&self) -> bool {
        *self == MONACTIVE_A::INACTIVE
    }
    #[doc = "Checks if the value of the field is `ACTIVE`"]
    #[inline(always)]
    pub fn is_active(&self) -> bool {
        *self == MONACTIVE_A::ACTIVE
    }
}
#[doc = "Field `MONIDLE` reader - Monitor Idle flag. This flag is set when the Monitor function sees the I2C bus change from active to inactive. This can be used by software to decide when to process data accumulated by the Monitor function. This flag will cause an interrupt when set if enabled via the INTENSET register. The flag can be cleared by writing a 1 to this bit."]
pub type MONIDLE_R = crate::BitReader<MONIDLE_A>;
#[doc = "Monitor Idle flag. This flag is set when the Monitor function sees the I2C bus change from active to inactive. This can be used by software to decide when to process data accumulated by the Monitor function. This flag will cause an interrupt when set if enabled via the INTENSET register. The flag can be cleared by writing a 1 to this bit.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum MONIDLE_A {
    #[doc = "0: Not idle. The I2C bus is not idle, or this flag has been cleared by software."]
    NOT_IDLE = 0,
    #[doc = "1: Idle. The I2C bus has gone idle at least once since the last time this flag was cleared by software."]
    IDLE = 1,
}
impl From<MONIDLE_A> for bool {
    #[inline(always)]
    fn from(variant: MONIDLE_A) -> Self {
        variant as u8 != 0
    }
}
impl MONIDLE_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> MONIDLE_A {
        match self.bits {
            false => MONIDLE_A::NOT_IDLE,
            true => MONIDLE_A::IDLE,
        }
    }
    #[doc = "Checks if the value of the field is `NOT_IDLE`"]
    #[inline(always)]
    pub fn is_not_idle(&self) -> bool {
        *self == MONIDLE_A::NOT_IDLE
    }
    #[doc = "Checks if the value of the field is `IDLE`"]
    #[inline(always)]
    pub fn is_idle(&self) -> bool {
        *self == MONIDLE_A::IDLE
    }
}
#[doc = "Field `MONIDLE` writer - Monitor Idle flag. This flag is set when the Monitor function sees the I2C bus change from active to inactive. This can be used by software to decide when to process data accumulated by the Monitor function. This flag will cause an interrupt when set if enabled via the INTENSET register. The flag can be cleared by writing a 1 to this bit."]
pub type MONIDLE_W<'a, const O: u8> = crate::BitWriter<'a, u32, STAT_SPEC, MONIDLE_A, O>;
impl<'a, const O: u8> MONIDLE_W<'a, O> {
    #[doc = "Not idle. The I2C bus is not idle, or this flag has been cleared by software."]
    #[inline(always)]
    pub fn not_idle(self) -> &'a mut W {
        self.variant(MONIDLE_A::NOT_IDLE)
    }
    #[doc = "Idle. The I2C bus has gone idle at least once since the last time this flag was cleared by software."]
    #[inline(always)]
    pub fn idle(self) -> &'a mut W {
        self.variant(MONIDLE_A::IDLE)
    }
}
#[doc = "Field `EVENTTIMEOUT` reader - Event Time-out Interrupt flag. Indicates when the time between events has been longer than the time specified by the TIMEOUT register. Events include Start, Stop, and clock edges. The flag is cleared by writing a 1 to this bit. No time-out is created when the I2C-bus is idle."]
pub type EVENTTIMEOUT_R = crate::BitReader<EVENTTIMEOUT_A>;
#[doc = "Event Time-out Interrupt flag. Indicates when the time between events has been longer than the time specified by the TIMEOUT register. Events include Start, Stop, and clock edges. The flag is cleared by writing a 1 to this bit. No time-out is created when the I2C-bus is idle.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum EVENTTIMEOUT_A {
    #[doc = "0: No time-out. I2C bus events have not caused a time-out."]
    NO_TIMEOUT = 0,
    #[doc = "1: Event time-out. The time between I2C bus events has been longer than the time specified by the TIMEOUT register."]
    EVEN_TIMEOUT = 1,
}
impl From<EVENTTIMEOUT_A> for bool {
    #[inline(always)]
    fn from(variant: EVENTTIMEOUT_A) -> Self {
        variant as u8 != 0
    }
}
impl EVENTTIMEOUT_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> EVENTTIMEOUT_A {
        match self.bits {
            false => EVENTTIMEOUT_A::NO_TIMEOUT,
            true => EVENTTIMEOUT_A::EVEN_TIMEOUT,
        }
    }
    #[doc = "Checks if the value of the field is `NO_TIMEOUT`"]
    #[inline(always)]
    pub fn is_no_timeout(&self) -> bool {
        *self == EVENTTIMEOUT_A::NO_TIMEOUT
    }
    #[doc = "Checks if the value of the field is `EVEN_TIMEOUT`"]
    #[inline(always)]
    pub fn is_even_timeout(&self) -> bool {
        *self == EVENTTIMEOUT_A::EVEN_TIMEOUT
    }
}
#[doc = "Field `EVENTTIMEOUT` writer - Event Time-out Interrupt flag. Indicates when the time between events has been longer than the time specified by the TIMEOUT register. Events include Start, Stop, and clock edges. The flag is cleared by writing a 1 to this bit. No time-out is created when the I2C-bus is idle."]
pub type EVENTTIMEOUT_W<'a, const O: u8> = crate::BitWriter<'a, u32, STAT_SPEC, EVENTTIMEOUT_A, O>;
impl<'a, const O: u8> EVENTTIMEOUT_W<'a, O> {
    #[doc = "No time-out. I2C bus events have not caused a time-out."]
    #[inline(always)]
    pub fn no_timeout(self) -> &'a mut W {
        self.variant(EVENTTIMEOUT_A::NO_TIMEOUT)
    }
    #[doc = "Event time-out. The time between I2C bus events has been longer than the time specified by the TIMEOUT register."]
    #[inline(always)]
    pub fn even_timeout(self) -> &'a mut W {
        self.variant(EVENTTIMEOUT_A::EVEN_TIMEOUT)
    }
}
#[doc = "Field `SCLTIMEOUT` reader - SCL Time-out Interrupt flag. Indicates when SCL has remained low longer than the time specific by the TIMEOUT register. The flag is cleared by writing a 1 to this bit."]
pub type SCLTIMEOUT_R = crate::BitReader<SCLTIMEOUT_A>;
#[doc = "SCL Time-out Interrupt flag. Indicates when SCL has remained low longer than the time specific by the TIMEOUT register. The flag is cleared by writing a 1 to this bit.\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum SCLTIMEOUT_A {
    #[doc = "0: No time-out. SCL low time has not caused a time-out."]
    NO_TIMEOUT = 0,
    #[doc = "1: Time-out. SCL low time has caused a time-out."]
    TIMEOUT = 1,
}
impl From<SCLTIMEOUT_A> for bool {
    #[inline(always)]
    fn from(variant: SCLTIMEOUT_A) -> Self {
        variant as u8 != 0
    }
}
impl SCLTIMEOUT_R {
    #[doc = "Get enumerated values variant"]
    #[inline(always)]
    pub fn variant(&self) -> SCLTIMEOUT_A {
        match self.bits {
            false => SCLTIMEOUT_A::NO_TIMEOUT,
            true => SCLTIMEOUT_A::TIMEOUT,
        }
    }
    #[doc = "Checks if the value of the field is `NO_TIMEOUT`"]
    #[inline(always)]
    pub fn is_no_timeout(&self) -> bool {
        *self == SCLTIMEOUT_A::NO_TIMEOUT
    }
    #[doc = "Checks if the value of the field is `TIMEOUT`"]
    #[inline(always)]
    pub fn is_timeout(&self) -> bool {
        *self == SCLTIMEOUT_A::TIMEOUT
    }
}
#[doc = "Field `SCLTIMEOUT` writer - SCL Time-out Interrupt flag. Indicates when SCL has remained low longer than the time specific by the TIMEOUT register. The flag is cleared by writing a 1 to this bit."]
pub type SCLTIMEOUT_W<'a, const O: u8> = crate::BitWriter<'a, u32, STAT_SPEC, SCLTIMEOUT_A, O>;
impl<'a, const O: u8> SCLTIMEOUT_W<'a, O> {
    #[doc = "No time-out. SCL low time has not caused a time-out."]
    #[inline(always)]
    pub fn no_timeout(self) -> &'a mut W {
        self.variant(SCLTIMEOUT_A::NO_TIMEOUT)
    }
    #[doc = "Time-out. SCL low time has caused a time-out."]
    #[inline(always)]
    pub fn timeout(self) -> &'a mut W {
        self.variant(SCLTIMEOUT_A::TIMEOUT)
    }
}
impl R {
    #[doc = "Bit 0 - Master Pending. Indicates that the Master is waiting to continue communication on the I2C-bus (pending) or is idle. When the master is pending, the MSTSTATE bits indicate what type of software service if any the master expects. This flag will cause an interrupt when set if, enabled via the INTENSET register. The MSTPENDING flag is not set when the DMA is handling an event (if the MSTDMA bit in the MSTCTL register is set). If the master is in the idle state, and no communication is needed, mask this interrupt."]
    #[inline(always)]
    pub fn mstpending(&self) -> MSTPENDING_R {
        MSTPENDING_R::new((self.bits & 1) != 0)
    }
    #[doc = "Bits 1:3 - Master State code. The master state code reflects the master state when the MSTPENDING bit is set, that is the master is pending or in the idle state. Each value of this field indicates a specific required service for the Master function. All other values are reserved. See Table 400 for details of state values and appropriate responses."]
    #[inline(always)]
    pub fn mststate(&self) -> MSTSTATE_R {
        MSTSTATE_R::new(((self.bits >> 1) & 7) as u8)
    }
    #[doc = "Bit 4 - Master Arbitration Loss flag. This flag can be cleared by software writing a 1 to this bit. It is also cleared automatically a 1 is written to MSTCONTINUE."]
    #[inline(always)]
    pub fn mstarbloss(&self) -> MSTARBLOSS_R {
        MSTARBLOSS_R::new(((self.bits >> 4) & 1) != 0)
    }
    #[doc = "Bit 6 - Master Start/Stop Error flag. This flag can be cleared by software writing a 1 to this bit. It is also cleared automatically a 1 is written to MSTCONTINUE."]
    #[inline(always)]
    pub fn mstststperr(&self) -> MSTSTSTPERR_R {
        MSTSTSTPERR_R::new(((self.bits >> 6) & 1) != 0)
    }
    #[doc = "Bit 8 - Slave Pending. Indicates that the Slave function is waiting to continue communication on the I2C-bus and needs software service. This flag will cause an interrupt when set if enabled via INTENSET. The SLVPENDING flag is not set when the DMA is handling an event (if the SLVDMA bit in the SLVCTL register is set). The SLVPENDING flag is read-only and is automatically cleared when a 1 is written to the SLVCONTINUE bit in the SLVCTL register. The point in time when SlvPending is set depends on whether the I2C interface is in HSCAPABLE mode. See Section 25.7.2.2.2. When the I2C interface is configured to be HSCAPABLE, HS master codes are detected automatically. Due to the requirements of the HS I2C specification, slave addresses must also be detected automatically, since the address must be acknowledged before the clock can be stretched."]
    #[inline(always)]
    pub fn slvpending(&self) -> SLVPENDING_R {
        SLVPENDING_R::new(((self.bits >> 8) & 1) != 0)
    }
    #[doc = "Bits 9:10 - Slave State code. Each value of this field indicates a specific required service for the Slave function. All other values are reserved. See Table 401 for state values and actions. note that the occurrence of some states and how they are handled are affected by DMA mode and Automatic Operation modes."]
    #[inline(always)]
    pub fn slvstate(&self) -> SLVSTATE_R {
        SLVSTATE_R::new(((self.bits >> 9) & 3) as u8)
    }
    #[doc = "Bit 11 - Slave Not Stretching. Indicates when the slave function is stretching the I2C clock. This is needed in order to gracefully invoke Deep Sleep or Power-down modes during slave operation. This read-only flag reflects the slave function status in real time."]
    #[inline(always)]
    pub fn slvnotstr(&self) -> SLVNOTSTR_R {
        SLVNOTSTR_R::new(((self.bits >> 11) & 1) != 0)
    }
    #[doc = "Bits 12:13 - Slave address match Index. This field is valid when the I2C slave function has been selected by receiving an address that matches one of the slave addresses defined by any enabled slave address registers, and provides an identification of the address that was matched. It is possible that more than one address could be matched, but only one match can be reported here."]
    #[inline(always)]
    pub fn slvidx(&self) -> SLVIDX_R {
        SLVIDX_R::new(((self.bits >> 12) & 3) as u8)
    }
    #[doc = "Bit 14 - Slave selected flag. SLVSEL is set after an address match when software tells the Slave function to acknowledge the address, or when the address has been automatically acknowledged. It is cleared when another address cycle presents an address that does not match an enabled address on the Slave function, when slave software decides to NACK a matched address, when there is a Stop detected on the bus, when the master NACKs slave data, and in some combinations of Automatic Operation. SLVSEL is not cleared if software NACKs data."]
    #[inline(always)]
    pub fn slvsel(&self) -> SLVSEL_R {
        SLVSEL_R::new(((self.bits >> 14) & 1) != 0)
    }
    #[doc = "Bit 15 - Slave Deselected flag. This flag will cause an interrupt when set if enabled via INTENSET. This flag can be cleared by writing a 1 to this bit."]
    #[inline(always)]
    pub fn slvdesel(&self) -> SLVDESEL_R {
        SLVDESEL_R::new(((self.bits >> 15) & 1) != 0)
    }
    #[doc = "Bit 16 - Monitor Ready. This flag is cleared when the MONRXDAT register is read."]
    #[inline(always)]
    pub fn monrdy(&self) -> MONRDY_R {
        MONRDY_R::new(((self.bits >> 16) & 1) != 0)
    }
    #[doc = "Bit 17 - Monitor Overflow flag."]
    #[inline(always)]
    pub fn monov(&self) -> MONOV_R {
        MONOV_R::new(((self.bits >> 17) & 1) != 0)
    }
    #[doc = "Bit 18 - Monitor Active flag. Indicates when the Monitor function considers the I 2C bus to be active. Active is defined here as when some Master is on the bus: a bus Start has occurred more recently than a bus Stop."]
    #[inline(always)]
    pub fn monactive(&self) -> MONACTIVE_R {
        MONACTIVE_R::new(((self.bits >> 18) & 1) != 0)
    }
    #[doc = "Bit 19 - Monitor Idle flag. This flag is set when the Monitor function sees the I2C bus change from active to inactive. This can be used by software to decide when to process data accumulated by the Monitor function. This flag will cause an interrupt when set if enabled via the INTENSET register. The flag can be cleared by writing a 1 to this bit."]
    #[inline(always)]
    pub fn monidle(&self) -> MONIDLE_R {
        MONIDLE_R::new(((self.bits >> 19) & 1) != 0)
    }
    #[doc = "Bit 24 - Event Time-out Interrupt flag. Indicates when the time between events has been longer than the time specified by the TIMEOUT register. Events include Start, Stop, and clock edges. The flag is cleared by writing a 1 to this bit. No time-out is created when the I2C-bus is idle."]
    #[inline(always)]
    pub fn eventtimeout(&self) -> EVENTTIMEOUT_R {
        EVENTTIMEOUT_R::new(((self.bits >> 24) & 1) != 0)
    }
    #[doc = "Bit 25 - SCL Time-out Interrupt flag. Indicates when SCL has remained low longer than the time specific by the TIMEOUT register. The flag is cleared by writing a 1 to this bit."]
    #[inline(always)]
    pub fn scltimeout(&self) -> SCLTIMEOUT_R {
        SCLTIMEOUT_R::new(((self.bits >> 25) & 1) != 0)
    }
}
impl W {
    #[doc = "Bit 4 - Master Arbitration Loss flag. This flag can be cleared by software writing a 1 to this bit. It is also cleared automatically a 1 is written to MSTCONTINUE."]
    #[inline(always)]
    pub fn mstarbloss(&mut self) -> MSTARBLOSS_W<4> {
        MSTARBLOSS_W::new(self)
    }
    #[doc = "Bit 6 - Master Start/Stop Error flag. This flag can be cleared by software writing a 1 to this bit. It is also cleared automatically a 1 is written to MSTCONTINUE."]
    #[inline(always)]
    pub fn mstststperr(&mut self) -> MSTSTSTPERR_W<6> {
        MSTSTSTPERR_W::new(self)
    }
    #[doc = "Bit 15 - Slave Deselected flag. This flag will cause an interrupt when set if enabled via INTENSET. This flag can be cleared by writing a 1 to this bit."]
    #[inline(always)]
    pub fn slvdesel(&mut self) -> SLVDESEL_W<15> {
        SLVDESEL_W::new(self)
    }
    #[doc = "Bit 17 - Monitor Overflow flag."]
    #[inline(always)]
    pub fn monov(&mut self) -> MONOV_W<17> {
        MONOV_W::new(self)
    }
    #[doc = "Bit 19 - Monitor Idle flag. This flag is set when the Monitor function sees the I2C bus change from active to inactive. This can be used by software to decide when to process data accumulated by the Monitor function. This flag will cause an interrupt when set if enabled via the INTENSET register. The flag can be cleared by writing a 1 to this bit."]
    #[inline(always)]
    pub fn monidle(&mut self) -> MONIDLE_W<19> {
        MONIDLE_W::new(self)
    }
    #[doc = "Bit 24 - Event Time-out Interrupt flag. Indicates when the time between events has been longer than the time specified by the TIMEOUT register. Events include Start, Stop, and clock edges. The flag is cleared by writing a 1 to this bit. No time-out is created when the I2C-bus is idle."]
    #[inline(always)]
    pub fn eventtimeout(&mut self) -> EVENTTIMEOUT_W<24> {
        EVENTTIMEOUT_W::new(self)
    }
    #[doc = "Bit 25 - SCL Time-out Interrupt flag. Indicates when SCL has remained low longer than the time specific by the TIMEOUT register. The flag is cleared by writing a 1 to this bit."]
    #[inline(always)]
    pub fn scltimeout(&mut self) -> SCLTIMEOUT_W<25> {
        SCLTIMEOUT_W::new(self)
    }
    #[doc = "Writes raw bits to the register."]
    #[inline(always)]
    pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
        self.0.bits(bits);
        self
    }
}
#[doc = "Status register for Master, Slave, and Monitor functions.\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [stat](index.html) module"]
pub struct STAT_SPEC;
impl crate::RegisterSpec for STAT_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [stat::R](R) reader structure"]
impl crate::Readable for STAT_SPEC {
    type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [stat::W](W) writer structure"]
impl crate::Writable for STAT_SPEC {
    type Writer = W;
}
#[doc = "`reset()` method sets STAT to value 0x0801"]
impl crate::Resettable for STAT_SPEC {
    #[inline(always)]
    fn reset_value() -> Self::Ux {
        0x0801
    }
}