[−][src]Type Definition lpc55_pac::sdif::cmd::R
type R = R<u32, CMD>;
Reader of register CMD
Implementations
impl R
[src]
pub fn cmd_index(&self) -> CMD_INDEX_R
[src]
Bits 0:5 - Command index.
pub fn response_expect(&self) -> RESPONSE_EXPECT_R
[src]
Bit 6 - Response expect.
pub fn response_length(&self) -> RESPONSE_LENGTH_R
[src]
Bit 7 - Response length.
pub fn check_response_crc(&self) -> CHECK_RESPONSE_CRC_R
[src]
Bit 8 - Check response CRC.
pub fn data_expected(&self) -> DATA_EXPECTED_R
[src]
Bit 9 - Data expected.
pub fn read_write(&self) -> READ_WRITE_R
[src]
Bit 10 - read/write.
pub fn transfer_mode(&self) -> TRANSFER_MODE_R
[src]
Bit 11 - Transfer mode.
pub fn send_auto_stop(&self) -> SEND_AUTO_STOP_R
[src]
Bit 12 - Send auto stop.
pub fn wait_prvdata_complete(&self) -> WAIT_PRVDATA_COMPLETE_R
[src]
Bit 13 - Wait prvdata complete.
pub fn stop_abort_cmd(&self) -> STOP_ABORT_CMD_R
[src]
Bit 14 - Stop abort command.
pub fn send_initialization(&self) -> SEND_INITIALIZATION_R
[src]
Bit 15 - Send initialization.
pub fn card_number(&self) -> CARD_NUMBER_R
[src]
Bits 16:20 - Specifies the card number of SDCARD for which the current Command is being executed
pub fn update_clock_registers_only(&self) -> UPDATE_CLOCK_REGISTERS_ONLY_R
[src]
Bit 21 - Update clock registers only.
pub fn read_ceata_device(&self) -> READ_CEATA_DEVICE_R
[src]
Bit 22 - Read ceata device.
pub fn ccs_expected(&self) -> CCS_EXPECTED_R
[src]
Bit 23 - CCS expected.
pub fn enable_boot(&self) -> ENABLE_BOOT_R
[src]
Bit 24 - Enable Boot - this bit should be set only for mandatory boot mode.
pub fn expect_boot_ack(&self) -> EXPECT_BOOT_ACK_R
[src]
Bit 25 - Expect Boot Acknowledge.
pub fn disable_boot(&self) -> DISABLE_BOOT_R
[src]
Bit 26 - Disable Boot.
pub fn boot_mode(&self) -> BOOT_MODE_R
[src]
Bit 27 - Boot Mode.
pub fn volt_switch(&self) -> VOLT_SWITCH_R
[src]
Bit 28 - Voltage switch bit.
pub fn use_hold_reg(&self) -> USE_HOLD_REG_R
[src]
Bit 29 - Use Hold Register.
pub fn start_cmd(&self) -> START_CMD_R
[src]
Bit 31 - Start command.