pub enum Code {
Show 18 variants
Input,
SensitiveInput,
Success,
TemporaryRedirect,
PermanentRedirect,
TemporaryFailure,
ServerUnavailable,
CGIError,
ProxyError,
SlowDown,
PermanentFailure,
NotFound,
Gone,
ProxyRequestRefused,
BadRequest,
ClientCertificateRequired,
ClientCertificateNotAuthorised,
CertificateNotValid,
}
Expand description
The precise two digit numeric code associated with a Status
.
Status codes not present in the spec are considered errors.
Variants
Input
The requested resource accepts a line of textual user input. The line is a prompt which should be displayed to the user. The same resource should then be requested again with the user’s input included as a query component. Queries are included in requests as per the usual generic URL definition in RFC3986, i.e. separated from the path by a ?. Reserved characters used in the user’s input must be “percent-encoded” as per RFC3986, and space characters should also be percent-encoded.
SensitiveInput
As per status code 10, but for use with sensitive input such as passwords. Clients should present the prompt as per status code 10, but the user’s input should not be echoed to the screen to prevent it being read by “shoulder surfers”.
Success
The request was handled successfully and a response body will follow the response header. The line is a MIME media type which applies to the response body.
TemporaryRedirect
The server is redirecting the client to a new location for the requested resource. There is no response body. is a new URL for the requested resource. The URL may be absolute or relative. The redirect should be considered temporary, i.e. clients should continue to request the resource at the original address and should not performance convenience actions like automatically updating bookmarks. There is no response body.
PermanentRedirect
The requested resource should be consistently requested from the new URL provided in future. Tools like search engine indexers or content aggregators should update their configurations to avoid requesting the old URL, and end-user clients may automatically update bookmarks, etc. Note that clients which only pay attention to the initial digit of status codes will treat this as a temporary redirect. They will still end up at the right place, they just won’t be able to make use of the knowledge that this redirect is permanent, so they’ll pay a small performance penalty by having to follow the redirect each time.
TemporaryFailure
The request has failed. There is no response body. The nature of the failure is temporary, i.e. an identical request MAY succeed in the future. The contents of may provide additional information on the failure, and should be displayed to human users.
ServerUnavailable
The server is unavailable due to overload or maintenance. (cf HTTP 503)
CGIError
A CGI process, or similar system for generating dynamic content, died unexpectedly or timed out.
ProxyError
A proxy request failed because the server was unable to successfully complete a transaction with the remote host. (cf HTTP 502, 504)
SlowDown
Rate limiting is in effect. is an integer number of seconds which the client must wait before another request is made to this server. (cf HTTP 429)
PermanentFailure
The request has failed. There is no response body. The nature of the failure is permanent, i.e. identical future requests will reliably fail for the same reason. The contents of may provide additional information on the failure, and should be displayed to human users. Automatic clients such as aggregators or indexing crawlers should not repeat this request.
NotFound
The requested resource could not be found but may be available in the future. (cf HTTP 404) (struggling to remember this important status code? Easy: you can’t find things hidden at Area 51!)
Gone
The resource requested is no longer available and will not be available again. Search engines and similar tools should remove this resource from their indices. Content aggregators should stop requesting the resource and convey to their human users that the subscribed resource is gone. (cf HTTP 410)
ProxyRequestRefused
The request was for a resource at a domain not served by the server and the server does not accept proxy requests.
BadRequest
The server was unable to parse the client’s request, presumably due to a malformed request. (cf HTTP 400)
ClientCertificateRequired
The requested resource requires a client certificate to access. If the request was made without a certificate, it should be repeated with one. If the request was made with a certificate, the server did not accept it and the request should be repeated with a different certificate. The contents of (and/or the specific 6x code) may provide additional information on certificate requirements or the reason a certificate was rejected.
ClientCertificateNotAuthorised
The supplied client certificate is not authorised for accessing the particular requested resource. The problem is not with the certificate itself, which may be authorised for other resources.
CertificateNotValid
The supplied client certificate was not accepted because it is not valid. This indicates a problem with the certificate in and of itself, with no consideration of the particular requested resource. The most likely cause is that the certificate’s validity start date is in the future or its expiry date has passed, but this code may also indicate an invalid signature, or a violation of a X509 standard requirements. The should provide more information about the exact error.
Trait Implementations
sourceimpl Ord for Code
impl Ord for Code
sourceimpl PartialOrd<Code> for Code
impl PartialOrd<Code> for Code
sourcefn partial_cmp(&self, other: &Code) -> Option<Ordering>
fn partial_cmp(&self, other: &Code) -> Option<Ordering>
This method returns an ordering between self
and other
values if one exists. Read more
1.0.0 · sourcefn lt(&self, other: &Rhs) -> bool
fn lt(&self, other: &Rhs) -> bool
This method tests less than (for self
and other
) and is used by the <
operator. Read more
1.0.0 · sourcefn le(&self, other: &Rhs) -> bool
fn le(&self, other: &Rhs) -> bool
This method tests less than or equal to (for self
and other
) and is used by the <=
operator. Read more
impl Copy for Code
impl Eq for Code
impl StructuralEq for Code
impl StructuralPartialEq for Code
Auto Trait Implementations
impl RefUnwindSafe for Code
impl Send for Code
impl Sync for Code
impl Unpin for Code
impl UnwindSafe for Code
Blanket Implementations
sourceimpl<T> BorrowMut<T> for T where
T: ?Sized,
impl<T> BorrowMut<T> for T where
T: ?Sized,
const: unstable · sourcefn borrow_mut(&mut self) -> &mut T
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> FmtForward for T
impl<T> FmtForward for T
fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,
fn fmt_binary(self) -> FmtBinary<Self> where
Self: Binary,
Causes self
to use its Binary
implementation when Debug
-formatted.
fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,
fn fmt_display(self) -> FmtDisplay<Self> where
Self: Display,
Causes self
to use its Display
implementation when
Debug
-formatted. Read more
fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,
fn fmt_lower_exp(self) -> FmtLowerExp<Self> where
Self: LowerExp,
Causes self
to use its LowerExp
implementation when
Debug
-formatted. Read more
fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,
fn fmt_lower_hex(self) -> FmtLowerHex<Self> where
Self: LowerHex,
Causes self
to use its LowerHex
implementation when
Debug
-formatted. Read more
fn fmt_octal(self) -> FmtOctal<Self> where
Self: Octal,
fn fmt_octal(self) -> FmtOctal<Self> where
Self: Octal,
Causes self
to use its Octal
implementation when Debug
-formatted.
fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,
fn fmt_pointer(self) -> FmtPointer<Self> where
Self: Pointer,
Causes self
to use its Pointer
implementation when
Debug
-formatted. Read more
fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,
fn fmt_upper_exp(self) -> FmtUpperExp<Self> where
Self: UpperExp,
Causes self
to use its UpperExp
implementation when
Debug
-formatted. Read more
fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,
fn fmt_upper_hex(self) -> FmtUpperHex<Self> where
Self: UpperHex,
Causes self
to use its UpperHex
implementation when
Debug
-formatted. Read more
impl<T> Pipe for T where
T: ?Sized,
impl<T> Pipe for T where
T: ?Sized,
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
Pipes by value. This is generally the method you want to use. Read more
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R where
R: 'a,
fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R where
R: 'a,
Borrows self
and passes that borrow into the pipe function. Read more
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,
fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R where
R: 'a,
Mutably borrows self
and passes that borrow into the pipe function. Read more
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R where
Self: Borrow<B>,
B: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.borrow()
into the pipe function. Read more
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
fn pipe_borrow_mut<'a, B, R>(
&'a mut self,
func: impl FnOnce(&'a mut B) -> R
) -> R where
Self: BorrowMut<B>,
B: 'a + ?Sized,
R: 'a,
Mutably borrows self
, then passes self.borrow_mut()
into the pipe
function. Read more
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R where
Self: AsRef<U>,
U: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.as_ref()
into the pipe function.
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R where
Self: AsMut<U>,
U: 'a + ?Sized,
R: 'a,
Mutably borrows self
, then passes self.as_mut()
into the pipe
function. Read more
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Deref<Target = T>,
T: 'a + ?Sized,
R: 'a,
Borrows self
, then passes self.deref()
into the pipe function.
impl<T> PipeAsRef for T
impl<T> PipeAsRef for T
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
fn pipe_as_ref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: AsRef<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_as_mut<'a, T, R>(&'a mut self, func: impl FnOnce(&'a mut T) -> R) -> R where
Self: AsMut<T>,
T: 'a,
R: 'a,
fn pipe_as_mut<'a, T, R>(&'a mut self, func: impl FnOnce(&'a mut T) -> R) -> R where
Self: AsMut<T>,
T: 'a,
R: 'a,
Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more
impl<T> PipeBorrow for T
impl<T> PipeBorrow for T
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
fn pipe_borrow<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R where
Self: Borrow<T>,
T: 'a,
R: 'a,
Pipes a trait borrow into a function that cannot normally be called in suffix position. Read more
fn pipe_borrow_mut<'a, T, R>(
&'a mut self,
func: impl FnOnce(&'a mut T) -> R
) -> R where
Self: BorrowMut<T>,
T: 'a,
R: 'a,
fn pipe_borrow_mut<'a, T, R>(
&'a mut self,
func: impl FnOnce(&'a mut T) -> R
) -> R where
Self: BorrowMut<T>,
T: 'a,
R: 'a,
Pipes a trait mutable borrow into a function that cannot normally be called in suffix position. Read more
impl<T> PipeDeref for T
impl<T> PipeDeref for T
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
fn pipe_deref<'a, R>(&'a self, func: impl FnOnce(&'a Self::Target) -> R) -> R where
Self: Deref,
R: 'a,
Pipes a dereference into a function that cannot normally be called in suffix position. Read more
fn pipe_deref_mut<'a, R>(
&'a mut self,
func: impl FnOnce(&'a mut Self::Target) -> R
) -> R where
Self: DerefMut,
R: 'a,
fn pipe_deref_mut<'a, R>(
&'a mut self,
func: impl FnOnce(&'a mut Self::Target) -> R
) -> R where
Self: DerefMut,
R: 'a,
Pipes a mutable dereference into a function that cannot normally be called in suffix position. Read more
impl<T> PipeRef for T
impl<T> PipeRef for T
impl<T> Tap for T
impl<T> Tap for T
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Immutable access to the Borrow<B>
of a value. Read more
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Mutable access to the BorrowMut<B>
of a value. Read more
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
Immutable access to the AsRef<R>
view of a value. Read more
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Mutable access to the AsMut<R>
view of a value. Read more
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self where
Self: Deref<Target = T>,
T: ?Sized,
fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self where
Self: Deref<Target = T>,
T: ?Sized,
Immutable access to the Deref::Target
of a value. Read more
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self where
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self where
Self: DerefMut<Target = T> + Deref,
T: ?Sized,
Mutable access to the Deref::Target
of a value. Read more
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self
Calls .tap()
only in debug builds, and is erased in release builds.
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self
Calls .tap_mut()
only in debug builds, and is erased in release
builds. Read more
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self where
Self: Borrow<B>,
B: ?Sized,
Calls .tap_borrow()
only in debug builds, and is erased in release
builds. Read more
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self where
Self: BorrowMut<B>,
B: ?Sized,
Calls .tap_borrow_mut()
only in debug builds, and is erased in release
builds. Read more
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self where
Self: AsRef<R>,
R: ?Sized,
Calls .tap_ref()
only in debug builds, and is erased in release
builds. Read more
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self where
Self: AsMut<R>,
R: ?Sized,
Calls .tap_ref_mut()
only in debug builds, and is erased in release
builds. Read more
impl<T> Tap for T
impl<T> Tap for T
fn tap<F, R>(self, func: F) -> Self where
F: FnOnce(&Self) -> R,
fn tap<F, R>(self, func: F) -> Self where
F: FnOnce(&Self) -> R,
Provides immutable access for inspection. Read more
fn tap_dbg<F, R>(self, func: F) -> Self where
F: FnOnce(&Self) -> R,
fn tap_dbg<F, R>(self, func: F) -> Self where
F: FnOnce(&Self) -> R,
Calls tap
in debug builds, and does nothing in release builds.
fn tap_mut<F, R>(self, func: F) -> Self where
F: FnOnce(&mut Self) -> R,
fn tap_mut<F, R>(self, func: F) -> Self where
F: FnOnce(&mut Self) -> R,
Provides mutable access for modification. Read more
fn tap_mut_dbg<F, R>(self, func: F) -> Self where
F: FnOnce(&mut Self) -> R,
fn tap_mut_dbg<F, R>(self, func: F) -> Self where
F: FnOnce(&mut Self) -> R,
Calls tap_mut
in debug builds, and does nothing in release builds.
impl<T, U> TapAsRef<U> for T where
U: ?Sized,
impl<T, U> TapAsRef<U> for T where
U: ?Sized,
fn tap_ref<F, R>(self, func: F) -> Self where
Self: AsRef<T>,
F: FnOnce(&T) -> R,
fn tap_ref<F, R>(self, func: F) -> Self where
Self: AsRef<T>,
F: FnOnce(&T) -> R,
Provides immutable access to the reference for inspection.
fn tap_ref_dbg<F, R>(self, func: F) -> Self where
Self: AsRef<T>,
F: FnOnce(&T) -> R,
fn tap_ref_dbg<F, R>(self, func: F) -> Self where
Self: AsRef<T>,
F: FnOnce(&T) -> R,
Calls tap_ref
in debug builds, and does nothing in release builds.
fn tap_ref_mut<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_ref_mut<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
Provides mutable access to the reference for modification.
fn tap_ref_mut_dbg<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_ref_mut_dbg<F, R>(self, func: F) -> Self where
Self: AsMut<T>,
F: FnOnce(&mut T) -> R,
Calls tap_ref_mut
in debug builds, and does nothing in release builds.
impl<T, U> TapBorrow<U> for T where
U: ?Sized,
impl<T, U> TapBorrow<U> for T where
U: ?Sized,
fn tap_borrow<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,
fn tap_borrow<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,
Provides immutable access to the borrow for inspection. Read more
fn tap_borrow_dbg<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,
fn tap_borrow_dbg<F, R>(self, func: F) -> Self where
Self: Borrow<T>,
F: FnOnce(&T) -> R,
Calls tap_borrow
in debug builds, and does nothing in release builds.
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_borrow_mut<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
Provides mutable access to the borrow for modification.
fn tap_borrow_mut_dbg<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
fn tap_borrow_mut_dbg<F, R>(self, func: F) -> Self where
Self: BorrowMut<T>,
F: FnOnce(&mut T) -> R,
Calls tap_borrow_mut
in debug builds, and does nothing in release
builds. Read more
impl<T> TapDeref for T
impl<T> TapDeref for T
fn tap_deref<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
fn tap_deref<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
Immutably dereferences self
for inspection.
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
fn tap_deref_dbg<F, R>(self, func: F) -> Self where
Self: Deref,
F: FnOnce(&Self::Target) -> R,
Calls tap_deref
in debug builds, and does nothing in release builds.
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
fn tap_deref_mut<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
Mutably dereferences self
for modification.
fn tap_deref_mut_dbg<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
fn tap_deref_mut_dbg<F, R>(self, func: F) -> Self where
Self: DerefMut,
F: FnOnce(&mut Self::Target) -> R,
Calls tap_deref_mut
in debug builds, and does nothing in release
builds. Read more