Struct fj_core::objects::Shell

pub struct Shell { /* private fields */ }

A 3-dimensional closed shell

Implementations

impl Shell

pub fn new(faces: impl IntoIterator<Item = Handle<Face>>) -> Self

Construct an empty instance of Shell

pub fn faces(&self) -> &ObjectSet<Face>

Access the faces of the shell

Trait Implementations

impl AddHole for Shell

fn add_blind_hole( &self, location: HoleLocation<'_>, radius: impl Into<Scalar>, path: impl Into<Vector<3>>, core: &mut Core ) -> Self

Add a blind hole at the provided location

fn add_through_hole( &self, [entry_location, exit_location]: [HoleLocation<'_>; 2], radius: impl Into<Scalar>, core: &mut Core ) -> Self

Add a through hole between the provided locations

impl AllHalfEdgesWithSurface for Shell

fn all_half_edges_with_surface( &self, result: &mut Vec<(Handle<HalfEdge>, Handle<Surface>)> )

Access all half-edges of the object, and the surface they’re on

impl Approx for &Shell

type Approximation = BTreeSet<FaceApprox>

The approximation of the object

type Cache = HalfEdgeApproxCache

The cache used to cache approximation results

fn approx_with_cache( self, tolerance: impl Into<Tolerance>, cache: &mut Self::Cache, core: &mut Core ) -> Self::Approximation

Approximate the object, using the provided cache

fn approx( self, tolerance: impl Into<Tolerance>, core: &mut Core ) -> Self::Approximation

Approximate the object

impl BoundingVerticesOfHalfEdge for Shell

fn bounding_vertices_of_half_edge( &self, half_edge: &Handle<HalfEdge> ) -> Option<CurveBoundary<Vertex>>

Determine the bounding vertices of a half-edge

impl BoundingVolume<3> for Shell

fn aabb(&self, geometry: &Geometry) -> Option<Aabb<3>>

Compute an axis-aligned bounding box (AABB)

impl BuildShell for Shell

fn empty() -> Shell

Build an empty shell

fn from_vertices_and_indices( vertices: impl IntoIterator<Item = impl Into<Point<3>>>, indices: impl IntoIterator<Item = [usize; 3]>, core: &mut Core ) -> Shell

Build a polyhedron by specifying its vertices and indices

fn tetrahedron( points: [impl Into<Point<3>>; 4], core: &mut Core ) -> TetrahedronShell

Build a tetrahedron from the provided points

impl Clone for Shell

fn clone(&self) -> Shell

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Shell

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl From<Shell> for AnyObject<Bare>

fn from(object: Shell) -> Self

Converts to this type from the input type.

impl Hash for Shell

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl Insert for Shell

type Inserted = Handle<Shell>

The type of Self, once it has been inserted

fn insert(self, core: &mut Core) -> Self::Inserted

Insert the object into its respective store

impl IsObject for Shell

type BareObject = Shell

The type of the bare object

impl Ord for Shell

fn cmp(&self, other: &Shell) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq for Shell

fn eq(&self, other: &Shell) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Shell

fn partial_cmp(&self, other: &Shell) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl ReplaceCurve for Shell

fn replace_curve( &self, original: &Handle<Curve>, replacement: Handle<Curve>, core: &mut Core ) -> ReplaceOutput<Self, Self::BareObject>

Replace the curve

impl ReplaceHalfEdge for Shell

fn replace_half_edge<const N: usize>( &self, original: &Handle<HalfEdge>, replacements: [Handle<HalfEdge>; N], core: &mut Core ) -> ReplaceOutput<Self, Self::BareObject>

Replace the half-edge

impl ReplaceVertex for Shell

fn replace_vertex( &self, original: &Handle<Vertex>, replacement: Handle<Vertex>, core: &mut Core ) -> ReplaceOutput<Self, Self::BareObject>

Replace the vertex

impl SiblingOfHalfEdge for Shell

fn are_siblings(&self, a: &Handle<HalfEdge>, b: &Handle<HalfEdge>) -> bool

Indicate whether the provided half-edges are siblings

fn get_sibling_of( &self, half_edge: &Handle<HalfEdge> ) -> Option<Handle<HalfEdge>>

Retrieve the sibling of this half-edge

impl SplitEdge for Shell

fn split_edge( &self, half_edge: &Handle<HalfEdge>, point: impl Into<Point<1>>, core: &mut Core ) -> (Self, [[Handle<HalfEdge>; 2]; 2])

Split the provided HalfEdge, as well as its sibling, into two

impl SplitFace for Shell

fn split_face( &self, face: &Handle<Face>, line: [(&Handle<HalfEdge>, impl Into<Point<1>>); 2], core: &mut Core ) -> (Self, [Handle<Face>; 2])

Split the face into two

impl SweepFaceOfShell for Shell

fn sweep_face_of_shell( &self, face: Handle<Face>, path: impl Into<Vector<3>>, core: &mut Core ) -> ShellExtendedBySweep

Sweep the Face of the Shell

impl TransformObject for Shell

fn transform_with_cache( &self, transform: &Transform, core: &mut Core, cache: &mut TransformCache ) -> Self

Transform the object using the provided cache

fn transform(&self, transform: &Transform, core: &mut Core) -> Self

Transform the object

fn translate(&self, offset: impl Into<Vector<3>>, core: &mut Core) -> Self

Translate the object

fn rotate(&self, axis_angle: impl Into<Vector<3>>, core: &mut Core) -> Self

Rotate the object

impl UpdateShell for Shell

fn add_faces<T>( &self, faces: impl IntoIterator<Item = T>, core: &mut Core ) -> Self

where T: Insert<Inserted = Handle<Face>>,

Add faces to the shell

fn update_face<T, R>( &self, handle: &Handle<Face>, update: impl FnOnce(&Handle<Face>, &mut Core) -> R, core: &mut Core ) -> Self

where T: Insert<Inserted = Handle<Face>>, R: IntoIterator<Item = T>,

Update a face of the shell

fn remove_face(&self, handle: &Handle<Face>) -> Self

Remove a face from the shell

impl Validate for Shell

fn validate( &self, config: &ValidationConfig, errors: &mut Vec<ValidationError>, geometry: &Geometry )

Validate the object

fn validate_and_return_first_error( &self, geometry: &Geometry ) -> Result<(), ValidationError>

Validate the object using default config and return on first error

impl Eq for Shell

impl StructuralPartialEq for Shell