Struct Writer 

pub struct Writer<W: Write> { /* private fields */ }

Streaming EDIFACT writer.

Wraps any Write implementation and serializes segments one at a time. Call Writer::finish to flush and get the underlying writer back.

Implementations

impl<W: Write> Writer<W>

pub fn new(inner: W) -> Self

Create a new writer with default EDIFACT delimiters.

pub fn with_una( inner: W, ssa: ServiceStringAdvice, ) -> Result<Self, EdifactError>

Create a writer with custom delimiters and write a UNA segment first.

pub fn write_segment(&mut self, seg: &Segment<'_>) -> Result<(), EdifactError>

Write a single segment.

pub fn write_raw( &mut self, tag: &str, elements: &[&str], ) -> Result<(), EdifactError>

Write a raw segment from tag + element string slices.

Each element string is split on the active component-separator byte from the configured ServiceStringAdvice to identify component boundaries. The default component separator is : (0x3A), but this can differ when a non-default UNA string was used to construct the writer.

Delimiter dependency

Callers that embed the literal : character in element strings rely on : being the component separator. When the writer uses a non-default delimiter set, : will not be treated as a component boundary and the segment will be written incorrectly.

UTF-8 safety: EDIFACT syntax requires all delimiter bytes to be single-byte ASCII characters (values 0x00–0x7F). Non-ASCII delimiter bytes would bisect multi-byte UTF-8 sequences in data values and produce malformed output. All fields of ServiceStringAdvice must therefore hold ASCII byte values.

To produce correct output regardless of the active delimiter, prefer Self::write_elements — it takes component boundaries explicitly and handles the mixed simple/composite shape that most real segments have. Self::write_segment_parts is the equivalent for owned data.

pub fn write_segment_parts<E>( &mut self, tag: &str, elements: &[E], ) -> Result<(), EdifactError>

where E: AsRef<[String]>,

Write a segment from a tag and pre-split element/component data.

elements is a slice of elements; each element is a sequence of component strings. This avoids the lifetime constraints of Self::write_segment when building segments from runtime-owned data (e.g. inside crate::WriterEmitter).

pub fn write_composites( &mut self, tag: &str, elements: &[&[&str]], ) -> Result<(), EdifactError>

Write a segment from a tag and borrowed element/component slices.

Unlike Self::write_raw, component boundaries are given explicitly rather than inferred by splitting on the active component separator, so values containing a literal separator byte are escaped instead of being silently reinterpreted as a composite boundary. Unlike Self::write_segment_parts, no String allocation is required.

Example

use edifact_rs::Writer;
let mut w = Writer::new(Vec::new());
// The `:` inside the sender id stays part of the value.
w.write_composites("NAD", &[&["MS"][..], &["ACME:INC"][..]])?;
assert_eq!(w.finish()?, b"NAD+MS+ACME?:INC'".to_vec());

Errors

Returns EdifactError if the underlying writer fails.

pub fn write_elements( &mut self, tag: &str, elements: &[DataElement<'_>], ) -> Result<(), EdifactError>

Write a segment whose data elements mix simple and composite shapes.

This is the general form of segment emission and the one that matches how EDIFACT segments are actually specified: NAD takes a simple qualifier followed by a composite party identification, DTM takes a single composite. write_raw (all-simple, with separators inferred by splitting) and write_composites (all-composite) are the two special cases.

Component boundaries are explicit, so a value containing the active component separator is escaped rather than silently promoted to a boundary. Nothing is allocated.

Example

use edifact_rs::{DataElement, Writer, elements};

let mut w = Writer::new(Vec::new());
// Explicit form …
w.write_elements(
    "NAD",
    &[DataElement::Simple("MS"), DataElement::Composite(&["ACME:INC", "", "9"])],
)?;
// … or the `elements!` shorthand.
w.write_elements("DTM", elements![["137", "20260101", "102"]])?;
assert_eq!(
    w.finish()?,
    b"NAD+MS+ACME?:INC::9'DTM+137:20260101:102'".to_vec(),
);

Errors

Returns EdifactError if the underlying writer fails.

pub fn finish(self) -> Result<W, EdifactError>

Flush and return the underlying writer.

pub fn finish_unt(self, message_ref: &str) -> Result<W, EdifactError>

Write the UNT segment and return the inner writer.

The count written into UNT DE 0074 covers the current message only: UNH, every segment written since it, and UNT itself. Segments written before the message’s UNH — an interchange-level UNB, or a preceding message — are excluded, as EDIFACT requires.

If no UNH has been written, the count falls back to every segment written so far plus one.

Errors

Returns an error if writing fails. Do not call write_raw or write_segment after finish_unt — the writer is consumed.

pub fn segment_count(&self) -> u64

Returns the total number of segments written so far.

pub fn service_string_advice(&self) -> ServiceStringAdvice

Returns the active ServiceStringAdvice (delimiter configuration).

pub fn escape_value<'v>(&self, value: &'v str) -> Cow<'v, str>

Escape a value string for inclusion in an EDIFACT segment.

Any character in value that matches the active element separator, component separator, release character, or segment terminator is escaped by prefixing it with the release character (default ?).

Returns a borrowed Cow::Borrowed(value) when no escaping is needed, avoiding an allocation on the fast path.

Example

let writer = Writer::new(std::io::sink());
// '+' must be escaped since it is the default element separator.
assert_eq!(writer.escape_value("price+tax"), "price?+tax");

pub fn begin_interchange( &mut self, syntax_id: &str, syntax_version: &str, sender: &str, recipient: &str, date: &str, time: &str, control_ref: &str, ) -> Result<(), EdifactError>

Write a UNB interchange header segment.

Generates:

UNB+<syntax_id>:<syntax_version>+<sender>+<recipient>+<date>:<time>+<control_ref>'

Composite components (S001 syntax identifier/version, S004 date/time) are passed separately rather than pre-joined with :, so they are written with the writer’s active component separator and so a literal separator inside sender, recipient, or control_ref is escaped rather than silently promoted to a component boundary.

Track the control_ref — it must be repeated in the matching end_interchange call.

Example

use edifact_rs::Writer;
let mut w = Writer::new(Vec::new());
w.begin_interchange("UNOA", "1", "SENDER", "RECEIVER", "200101", "0900", "IC1")?;
assert_eq!(
    w.finish()?,
    b"UNB+UNOA:1+SENDER+RECEIVER+200101:0900+IC1'".to_vec(),
);

Errors

Returns EdifactError if writing fails.

pub fn begin_message<'w>( &'w mut self, message_ref: &str, message_type: &str, version: &str, release: &str, controlling_agency: &str, ) -> Result<MessageWriter<'w, W>, EdifactError>

Write a UNH message header and return a MessageWriter guard.

The guard tracks the per-message segment count automatically. Call MessageWriter::finish when all message segments have been written — this writes the matching UNT segment with the correct count. If finish is not called, Drop will attempt to write UNT as a best-effort fallback (errors are silently discarded on drop; prefer explicit finish).

Generates:

UNH+<message_ref>+<message_type>:<version>:<release>:<controlling_agency>'

Errors

Returns EdifactError if writing the UNH segment fails.

pub fn end_interchange( &mut self, message_count: u32, control_ref: &str, ) -> Result<(), EdifactError>

Write a UNZ interchange trailer segment.

message_count is the number of UNH/UNT message pairs in the interchange. control_ref must match the value passed to begin_interchange.

If you used begin_message for every message in the interchange, message_count equals the number of times you called that method.

Errors

Returns EdifactError if writing fails.