tix-tracker 0.11.0

#[allow(clippy::wildcard_imports)]
use super::*;

impl App {
    pub fn handle_key(&mut self, key: KeyEvent) -> Result<Action> {
        if key.kind != KeyEventKind::Press {
            return Ok(Action::None);
        }
        let context = self.input_context();
        // The mode shell is consulted **before** the `F(12)` sentinel rewrite
        // (tui-mode-navigation, D2). A shell chord (F1–F4/F12, ctrl+n) switches
        // modes only when the active top-level context does not bind the key
        // itself — so `F2` inside a form is still `open_picker`, and a genuinely
        // unbound key still becomes the sentinel.
        if let Some(action) = self.shell_action(context, key) {
            let result = self.run_shell_action(action);
            self.sync_top_mode();
            return result;
        }
        // The rail owns the keyboard while it is focused, and is entered with
        // `h`/`Left` when the active mode has no leftward target of its own
        // (see `rail_entry_available`). Both checks sit after the shell chords,
        // so a mode switch still works from inside the rail, and before the
        // binding resolution, so the rail's `j`/`k`/`Enter` are read raw rather
        // than rewritten to the mode's own bindings. A text-entry context is
        // never intercepted: `h` there is a letter.
        if self.nav_focus.is_some() {
            return self.handle_nav_key(key);
        }
        // The startup tips modal (tix #1632) owns the keyboard raw, and **before**
        // the rail-entry check below: its keys include `Left`/`h`, which that check
        // would otherwise read as "focus the navigation rail". Its keys are raw for
        // the usual reason too — the board binds several of the same letters
        // (`n`, `p`, `d`), and the binding layer would canonicalize them first.
        if matches!(self.mode, Mode::Tips { .. }) {
            return self.handle_tips_key(key);
        }
        // The `F10` Portfolio page's **Roadmap** tab (WP05) owns two raw-key layers
        // ahead of the binding layer (and ahead of the rail-entry check below, so
        // `h` typed into an owner name is a letter rather than a jump to the rail).
        // An open overlay is a text surface, so its keys must not canonicalize
        // (`j` would become `Down`, `q` would become `Esc`); and the tab's command
        // letters (`c`/`e`/`a`/`x`/`f`/`r`) are not bound in
        // `InputContext::Portfolio` and would otherwise be rewritten to the inert
        // `F(12)` sentinel. Everything else on the page — `j`/`k`, `Tab`, `q`, `?` —
        // still resolves through the bindings so a rebind keeps working, and the
        // rail is never focused while an overlay is open.
        if matches!(self.mode, Mode::Portfolio) {
            if self.portfolio_roadmap_overlay.is_some() {
                return self.handle_roadmap_overlay_key(key);
            }
            if self.handle_roadmap_tab_key(key)? {
                return Ok(Action::None);
            }
        }
        if !Self::allows_text_fallback(context)
            && matches!(key.code, KeyCode::Left | KeyCode::Char('h'))
            && self.rail_entry_available()
        {
            self.focus_rail();
            return Ok(Action::None);
        }
        // The filter modal's open value picker owns the keyboard **ahead of** the
        // binding layer, exactly as the triage inbox's dropdown does: its keys must
        // reach `DropdownState` unrewritten, or `l`/`enter` would canonicalize to the
        // modal's open-picker action and the list could neither be filtered nor
        // chosen once it was open. `esc` closes it (raw), and typing filters it.
        if matches!(self.mode, Mode::FilterModal) && self.filter_picker.is_some() {
            return self.handle_filter_picker_key(key);
        }
        // The due-warning overlay's four answers are raw keys, for the reason the
        // picker above is: the board binds `d` (delete) and `g`… the same
        // keystrokes, and the binding layer would canonicalize them to *its*
        // events before the overlay ever saw the key the user pressed.
        if matches!(self.mode, Mode::RecurringWarning) {
            return self.handle_recurring_warning_key(key);
        }
        // The mention surfaces' keys are raw, for the same reason: the board binds
        // some of the same letters, and the binding layer would canonicalize them
        // into *its* events before the overlay saw the key the user pressed.
        if matches!(self.mode, Mode::MentionNotice) {
            return self.handle_mention_notice_key(key);
        }
        if matches!(self.mode, Mode::Mentions) {
            return self.handle_mentions_view_key(key);
        }
        // The F8 Schedule page's own raw layer (WP07 T036/T037), placed with the
        // other raw layers and ahead of the binding layer for the same reason they
        // are: the page's `[keybindings.schedule]` section binds the Series tab's
        // actions, so a `Tab` there resolves to the inert sentinel and `c`/`e`/`a`
        // are unbound. Its bound keys (`j`/`k`, `q`, `g`, `p`, `r`, `s`, `i`) still
        // resolve through the bindings, so a rebind of one keeps working.
        if matches!(self.mode, Mode::Schedule) && self.handle_schedule_raw_key(key)? {
            return Ok(Action::None);
        }
        // The `F7` Stats page's **Burndown** tab (WP06 T030), placed with the other raw
        // layers and ahead of the binding layer for the same reason: the tab's controls
        // (`[`, `]`, `p`, `t`, `u`, `v`, `d`, `D`) are bound nowhere, so the binding layer
        // would rewrite them to the inert `F(12)` sentinel. Its bound keys (`j`/`k`,
        // `Tab`, `?`, `q`) still resolve through the bindings, so a rebind keeps working,
        // and the layer returns `false` on every other Stats tab.
        if matches!(self.mode, Mode::Stats) && self.handle_burndown_raw_key(key)? {
            return Ok(Action::None);
        }
        let key = self
            .bindings
            .action(context, key)
            .map(|action| self.bindings.canonical_event(context, action))
            .unwrap_or_else(|| {
                if Self::allows_text_fallback(context) {
                    key
                } else {
                    KeyEvent::new(KeyCode::F(12), KeyModifiers::NONE)
                }
            });
        let result = self.handle_resolved_key(context, key);
        self.sync_top_mode();
        result
    }

    /// The shell action a key resolves to in `context`, if any.
    ///
    /// `None` unless the context is one of the five top-level modes, the context
    /// does **not** bind the key, and the shell context does. The local binding
    /// always wins: this is the single rule that keeps `F2`-in-form as the picker.
    pub(in crate::app) fn shell_action(
        &self,
        context: InputContext,
        key: KeyEvent,
    ) -> Option<TuiAction> {
        if !matches!(
            context,
            InputContext::Board
                | InputContext::Triage
                | InputContext::Cycle
                | InputContext::Milestones
                | InputContext::PlanningManagement
                | InputContext::Settings
                | InputContext::Form
        ) {
            return None;
        }
        if self.bindings.action(context, key).is_some() {
            return None;
        }
        self.bindings.action(InputContext::Shell, key)
    }

    /// Run a shell action: switch modes or cycle the navigation display.
    pub(in crate::app) fn run_shell_action(&mut self, action: TuiAction) -> Result<Action> {
        match action {
            TuiAction::SwitchToBoard => self.switch_top_mode(TopMode::Board),
            TuiAction::SwitchToTriage => self.switch_top_mode(TopMode::Triage),
            TuiAction::SwitchToCycle => self.switch_top_mode(TopMode::Cycle),
            TuiAction::SwitchToMilestones => self.switch_top_mode(TopMode::Milestones),
            TuiAction::SwitchToRepos => self.switch_top_mode(TopMode::Repos),
            TuiAction::SwitchToStats => self.switch_top_mode(TopMode::Stats),
            TuiAction::HealthForm => self.open_health_form(),
            TuiAction::SwitchToSchedule => self.switch_top_mode(TopMode::Schedule),
            TuiAction::SwitchToLibrary => self.switch_top_mode(TopMode::Library),
            TuiAction::SwitchToPortfolio => self.switch_top_mode(TopMode::Portfolio),
            TuiAction::SwitchToNewIssue => self.switch_top_mode(TopMode::NewIssue),
            TuiAction::SwitchToConfig => self.switch_top_mode(TopMode::Config),
            TuiAction::ToggleNavigation => {
                self.nav_display = self.nav_display.next();
                if self.nav_display == NavDisplay::Off {
                    // A cursor on a rail nobody can see is a keyboard trap.
                    self.nav_focus = None;
                }
                Ok(Action::None)
            }
            _ => Ok(Action::None),
        }
    }

    /// Switch the shell to `target`, reusing each mode's existing open path.
    ///
    /// The sibling top-level state is dropped first so a switch does not leave a
    /// stale modal behind to reappear when the mode is left again; the *openers*
    /// are the same methods the letter keys call.
    pub fn switch_top_mode(&mut self, target: TopMode) -> Result<Action> {
        // Released by default; only the Milestones arm re-arms it after opening
        // the Config surface. Keeping this here (not derived from the target in
        // `open_settings`) means every other entry point — `s`, `b` — is Config.
        self.milestone_mode = false;
        match target {
            TopMode::Board => {
                self.close_top_level_state();
                self.mode = Mode::Board;
                self.rebuild_board();
            }
            TopMode::Triage => {
                self.close_top_level_state();
                self.mode = Mode::Board;
                let result = self.open_triage_inbox();
                self.sync_top_mode();
                return result;
            }
            TopMode::Cycle => {
                self.close_top_level_state();
                self.cycle_state = Some(crate::ui::cycle::CycleState::default());
                self.mode = Mode::Cycle;
            }
            TopMode::NewIssue => {
                self.close_top_level_state();
                self.open_new_issue_form();
            }
            TopMode::Config => {
                self.close_top_level_state();
                self.open_settings(None);
            }
            TopMode::Milestones => {
                // The Milestones mode is the Config surface pinned to the
                // milestones section, with the section rail hidden (`render_config`
                // checks `milestone_mode`). Pinning the planning segment here means
                // the body's row cursor is already the milestones list.
                self.close_top_level_state();
                self.open_settings(None);
                self.milestone_mode = true;
                if let Some(settings) = self.settings.as_mut() {
                    settings.section = ConfigSection::Milestones;
                    // No rail is drawn; the index owns the keys.
                    settings.focus(ConfigLevel::Index);
                }
                let modal = self.planning.get_or_insert_with(PlanningModal::new);
                modal.segment = PlanningSegment::Milestones;
                modal.prompt = None;
                modal.selected = 0;
            }
            TopMode::Repos => {
                self.close_top_level_state();
                self.repos_cursor = 0;
                self.mode = Mode::Repos;
            }
            TopMode::Stats => {
                self.close_top_level_state();
                self.stats_cursor = 0;
                // WP05: the page opens on the tab it always showed, and the Time tab's
                // snapshot is taken when that tab is first shown (or after a mutation),
                // never per frame.
                self.stats_tab = StatsTab::Health;
                self.stats_time = None;
                // WP06: the Burndown tab's selections are session state too, and its fold
                // is taken when the tab is first shown — so the page opens on the tab it
                // always showed, with no analytics read at all.
                self.stats_burndown = None;
                // Re-read before drawing: a page that opened with a stale document
                // would show a state the files no longer have.
                self.refresh_health();
                self.mode = Mode::Stats;
            }
            TopMode::Schedule => {
                self.close_top_level_state();
                self.schedule = Some(crate::ui::schedule::ScheduleState::new());
                // A page opened with a stale read would show a state the files no
                // longer have: the capacity read and the schedule warnings are
                // re-derived before the mode draws.
                self.refresh_capacity_view();
                self.refresh_cycle_schedule_warnings();
                self.mode = Mode::Schedule;
            }
            TopMode::Library => {
                self.close_top_level_state();
                self.library = Some(crate::ui::library::LibraryState::new());
                self.mode = Mode::Library;
            }
            TopMode::Portfolio => {
                self.close_top_level_state();
                self.portfolio = Some(crate::ui::portfolio::PortfolioState::new());
                // The page opens on the empty filter; a filter is session state and
                // is never persisted, so a fresh visit starts from "everything".
                self.roadmap_filter = crate::roadmap::RoadmapFilter::default();
                self.refresh_portfolio_projects();
                self.mode = Mode::Portfolio;
            }
        }
        self.sync_top_mode();
        Ok(Action::None)
    }

    /// Drop the state of any top-level mode, so a switch starts clean.
    pub(in crate::app) fn close_top_level_state(&mut self) {
        self.triage = None;
        self.cycle_state = None;
        self.settings = None;
        self.planning = None;
        self.planning_form = None;
        self.date_picker = None;
        self.form = None;
        self.form_picker = None;
        self.filter_modal = None;
        self.filter_picker = None;
        self.schedule = None;
        self.library = None;
        self.portfolio = None;
        self.portfolio_projects = None;
        self.portfolio_reports = None;
        self.portfolio_epics = None;
        self.portfolio_roadmap = None;
        self.portfolio_roadmap_overlay = None;
        // WP05: the two time overlays belong to the Stats page; leaving the page (or
        // entering another) drops them rather than leaving a form over an unrelated
        // mode. The Time tab's snapshot is dropped with them, so the next visit
        // re-reads the files (see `switch_top_mode`).
        self.time_form = None;
        self.time_filter_form = None;
        self.stats_time = None;
        // A message about the mode being left would be stale over the mode being
        // entered; a refusal raised by the new mode's opener sets its own afterwards.
        self.status_msg = None;
    }

    /// Record the top-level mode implied by the current [`Mode`].
    ///
    /// Derived rather than assigned at every entry point: `t`, `m`, `n`, `s`, and
    /// every close path already move `mode`, so reading it back keeps the
    /// navigation highlight in step without a second place to update.
    ///
    /// A planning form or date picker opened **from the Config mode** belongs to
    /// Config, not to the Cycle mode its input context would otherwise imply:
    /// `settings` is `Some` exactly while the Config mode's state is present, and
    /// its sub-surfaces keep it.
    pub(in crate::app) fn sync_top_mode(&mut self) {
        if self.settings.is_some() {
            // The Config surface hosts two top-level modes: F12 Config, and the
            // F5 Milestones mode that borrows it (`milestone_mode`). The flag,
            // not the `InputContext`, decides which — `Milestones` is only one of
            // the contexts this surface can be in.
            self.top_mode = if self.milestone_mode {
                TopMode::Milestones
            } else {
                TopMode::Config
            };
            return;
        }
        if let Some(mode) = Self::top_mode_for_context(self.input_context()) {
            self.top_mode = mode;
        }
    }

    pub(in crate::app) fn top_mode_for_context(context: InputContext) -> Option<TopMode> {
        match context {
            InputContext::Board => Some(TopMode::Board),
            InputContext::Triage => Some(TopMode::Triage),
            InputContext::Cycle => Some(TopMode::Cycle),
            InputContext::PlanningManagement
            | InputContext::PlanningConfirm
            | InputContext::PlanningForm
            | InputContext::DatePicker => Some(TopMode::Cycle),
            InputContext::Settings | InputContext::SettingsPrompt => Some(TopMode::Config),
            InputContext::Milestones => Some(TopMode::Milestones),
            InputContext::Repos => Some(TopMode::Repos),
            InputContext::Stats => Some(TopMode::Stats),
            InputContext::Schedule => Some(TopMode::Schedule),
            InputContext::Library => Some(TopMode::Library),
            InputContext::Portfolio => Some(TopMode::Portfolio),
            InputContext::Form | InputContext::FormPicker => Some(TopMode::NewIssue),
            _ => None,
        }
    }

    pub(in crate::app) fn allows_text_fallback(context: InputContext) -> bool {
        matches!(
            context,
            InputContext::Form
                | InputContext::FormPicker
                | InputContext::Filter
                | InputContext::FilterModal
                // #1496: the overlay's `/` line takes free text. Without this, every
                // letter arrives as `F(12)` — the rewrite happens before the handler sees
                // the key — and the search line would be untypeable. The *list* mode is
                // deliberately not listed here: it has no text entry, so an unbound key
                // there is a no-op either way.
                | InputContext::HelpSearch
                | InputContext::ContextMenu
                | InputContext::PlanningForm
                | InputContext::Comment
                | InputContext::Asset
                | InputContext::MoveIntoDone
                | InputContext::LinkPrompt
                | InputContext::SettingsPrompt
                | InputContext::BulkModal
                | InputContext::Triage
                // WP05: the views modal's name prompt. The **list** context is
                // deliberately absent: it is a menu, so an unbound key there must
                // be inert rather than typed.
                | InputContext::ViewsPrompt
        )
    }

    pub(in crate::app) fn input_context(&self) -> InputContext {
        match &self.mode {
            Mode::Board => InputContext::Board,
            Mode::RolloverDialog => InputContext::Rollover,
            Mode::Detail if self.related_picker.is_some() => InputContext::RelatedPicker,
            Mode::Detail => InputContext::Detail,
            Mode::Form if self.form_picker.is_some() => InputContext::FormPicker,
            Mode::Form => InputContext::Form,
            Mode::ConfirmDelete | Mode::ConfirmArchive { .. } => InputContext::ConfirmDelete,
            Mode::MoveIntoDone { .. } => InputContext::MoveIntoDone,
            Mode::TransitionReason { .. } => InputContext::MoveIntoDone,
            Mode::ConfirmBlockedMove { .. } => InputContext::ConfirmBlockedMove,
            Mode::Help { .. } if self.help_searching => InputContext::HelpSearch,
            Mode::Help { .. } => InputContext::Help,
            // The tips modal draws over the board (or the create form) and reads
            // its own keys raw, so the board's context is the honest one: it is
            // what the modal is standing in for while it is open.
            Mode::Tips { .. } => InputContext::Board,
            Mode::ActionMenu { .. } => InputContext::ContextMenu,
            Mode::Filter { .. } => InputContext::Filter,
            Mode::FilterModal => InputContext::FilterModal,
            Mode::Settings
                if self
                    .settings
                    .as_ref()
                    .is_some_and(|modal| modal.prompt.is_some())
                    // A planning delete confirmation raised from the Config
                    // mode's cycles/milestones sections is answered with the
                    // same `y`/`esc` keys, so it uses the same context.
                    || self
                        .planning
                        .as_ref()
                        .is_some_and(|modal| modal.prompt.is_some()) =>
            {
                InputContext::SettingsPrompt
            }
            Mode::Settings if self.milestone_mode => InputContext::Milestones,
            Mode::Settings => InputContext::Settings,
            Mode::PlanningManagement
                if self
                    .planning
                    .as_ref()
                    .is_some_and(|modal| modal.prompt.is_some()) =>
            {
                InputContext::PlanningConfirm
            }
            Mode::PlanningManagement => InputContext::PlanningManagement,
            Mode::PlanningForm => InputContext::PlanningForm,
            Mode::DatePicker { .. } => InputContext::DatePicker,
            Mode::Comment { .. } => InputContext::Comment,
            Mode::Asset { .. } => InputContext::Asset,
            Mode::EditRepair { .. } => InputContext::EditRepair,
            Mode::EditConflict { .. } => InputContext::EditConflict,
            Mode::LinkCreate { .. } | Mode::LinkEdit { .. } => InputContext::LinkPrompt,
            // #1384: a single-line selector prompt, so it shares the link prompt's
            // Submit/Cancel bindings rather than adding a context that would bind
            // the same two keys.
            Mode::ParentPrompt { .. } => InputContext::LinkPrompt,
            Mode::ConfirmRemoveRelationship { .. } => InputContext::ConfirmDelete,
            Mode::BulkModal => InputContext::BulkModal,
            Mode::TriageInbox => InputContext::Triage,
            Mode::Cycle => InputContext::Cycle,
            Mode::Repos => InputContext::Repos,
            Mode::Stats => InputContext::Stats,
            // The form carries free text, so it takes the typing context — the same
            // one the WIP override prompt uses.
            Mode::HealthForm => InputContext::Comment,
            // WP05: both time overlays carry free text (minutes, a date, a reason, an
            // author), so they take the typing context for the same reason.
            Mode::TimeForm | Mode::TimeFilterForm => InputContext::Comment,
            // The overlay draws over the board and its keys never reach the
            // binding layer (see `handle_key`), so the board's context is the
            // honest one: what is on screen underneath is the board.
            // Both mention surfaces draw over the board and read their own keys
            // raw (see `handle_key`), so the board's context is the honest one.
            Mode::Mentions | Mode::MentionNotice => InputContext::Board,
            Mode::RecurringWarning => InputContext::Board,
            // The override modal carries the one free-text field, so it takes the
            // text context: a reason is typed, not pressed.
            Mode::WipOverride { .. } => InputContext::Comment,
            Mode::Schedule => InputContext::Schedule,
            Mode::Library => InputContext::Library,
            Mode::Portfolio => InputContext::Portfolio,
            // WP05. The views modal has two key layers, exactly as the settings
            // modal has one and the triage inbox has one: a prompt takes the keys
            // first (and is the only layer that carries free text), the list has
            // them otherwise. A delete confirmation borrows the shared
            // `ConfirmDelete` context, so `y`/`esc` mean here what they mean
            // everywhere else that confirms.
            Mode::Views => match self.views.as_ref().and_then(|modal| modal.prompt.as_ref()) {
                Some(ViewsPrompt::ConfirmDelete { .. }) => InputContext::ConfirmDelete,
                Some(ViewsPrompt::Create(_) | ViewsPrompt::Rename { .. }) => {
                    InputContext::ViewsPrompt
                }
                None => InputContext::Views,
            },
        }
    }

    /// The batch modal's keys (WP07 T032/T033).
    ///
    /// Every branch here either changes the modal's **own** state or calls a shared
    /// service. There is no `IssuePatch` built here and no `store.update` here: the
    /// modal holds `PatchFlags` and the plan/apply live in `bulk::plan`/`bulk::apply`,
    /// which is what "reject TUI-local patch construction or direct writes" asks for.
    ///
    /// `p` previews, `y` **arms** and then `y` again confirms, and `esc` cancels from
    /// any state. Two `y` presses because "I saw it" and "I approved it" are two
    /// decisions, and one `y` conflates them.
    /// Open the batch modal, optionally marking the card under the cursor first.
    ///
    /// `mark` is what makes `space` on a card the first press rather than two. It
    /// marks **only if** the selection is not already refused — a duplicate or a
    /// full selection is reported on the modal's note, not silently swallowed, so
    /// the second `space` on the same card tells the user why nothing changed.
    ///
    /// The board's `(active_col, selected)` cursor is never written here, so opening
    /// and cancelling the modal restores the board exactly (T031).
    pub(in crate::app) fn open_bulk_modal(
        &mut self,
        action: crate::ui::bulk::BatchAction,
        mark: bool,
    ) {
        if mark {
            let number = self.board.get_selected_card().map(|c| c.number);
            let mut modal = self
                .bulk
                .take()
                .unwrap_or_else(|| crate::ui::bulk::BulkModal::new(action));
            if let Some(number) = number {
                if let Err(problem) = modal.selection.toggle(number) {
                    modal.note = Some(problem.to_string());
                }
            }
            self.bulk = Some(modal);
        } else if self.bulk.is_none() {
            self.bulk = Some(crate::ui::bulk::BulkModal::new(action));
        }
        self.mode = Mode::BulkModal;
    }

    pub(in crate::app) fn handle_resolved_key(
        &mut self,
        _context: InputContext,
        key: KeyEvent,
    ) -> Result<Action> {
        match self.mode.clone() {
            Mode::Board => self.handle_board_key(key),
            Mode::RolloverDialog => self.handle_rollover_dialog_key(key),
            Mode::Detail => self.handle_detail_key(key),
            Mode::Form => self.handle_form_key(key),
            Mode::ConfirmDelete => self.handle_confirm_delete_key(key),
            Mode::ConfirmArchive { .. } => self.handle_confirm_archive_key(key),
            Mode::MoveIntoDone { .. } => self.handle_move_into_done_key(key),
            Mode::TransitionReason { .. } => self.handle_transition_reason_key(key),
            Mode::ConfirmBlockedMove { warning } => {
                self.handle_confirm_blocked_move_key(key, &warning)
            }
            Mode::Help { .. } => self.handle_help_key(key),
            Mode::Tips { .. } => self.handle_tips_key(key),
            Mode::ActionMenu { .. } => self.handle_action_menu_key(key),
            Mode::Filter { .. } => self.handle_filter_key(key),
            Mode::FilterModal => self.handle_filter_modal_key(key),
            Mode::BulkModal => self.handle_bulk_modal_key(key),
            Mode::TriageInbox => self.handle_triage_key(key),
            Mode::Cycle => self.handle_cycle_key(key),
            Mode::Repos => self.handle_repos_key(key),
            Mode::Stats => self.handle_stats_key(key),
            Mode::HealthForm => self.handle_health_form_key(key),
            Mode::TimeForm => self.handle_time_form_key(key),
            Mode::TimeFilterForm => self.handle_time_filter_form_key(key),
            Mode::MentionNotice => self.handle_mention_notice_key(key),
            Mode::Mentions => self.handle_mentions_view_key(key),
            Mode::RecurringWarning => self.handle_recurring_warning_key(key),
            Mode::WipOverride { .. } => self.handle_wip_override_key(key),
            Mode::Schedule => self.handle_schedule_key(key),
            Mode::Library => self.handle_library_key(key),
            Mode::Portfolio => self.handle_portfolio_key(key),
            Mode::Views => self.handle_views_key(key),
            Mode::Settings => self.handle_settings_key(key),
            Mode::PlanningManagement => self.handle_planning_key(key),
            Mode::PlanningForm => self.handle_planning_form_key(key),
            Mode::DatePicker { .. } => self.handle_date_picker_key(key),
            Mode::Comment { .. } => self.handle_comment_key(key),
            Mode::Asset { .. } => self.handle_asset_key(key),
            Mode::EditRepair { .. } => self.handle_edit_repair_key(key),
            Mode::EditConflict { .. } => self.handle_edit_conflict_key(key),
            Mode::LinkCreate { .. } => self.handle_link_prompt_key(key),
            Mode::LinkEdit { .. } => self.handle_link_prompt_key(key),
            Mode::ParentPrompt { .. } => self.handle_parent_prompt_key(key),
            Mode::ConfirmRemoveRelationship { .. } => self.handle_remove_relationship_key(key),
        }
    }
}