stm32h7 0.16.0

///Register `PR1` reader
pub type R = crate::R<PR1rs>;
///Register `PR1` writer
pub type W = crate::W<PR1rs>;
///Field `PR0` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR0_R = crate::BitReader;
///Field `PR0` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR0_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR1` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR1_R = crate::BitReader;
///Field `PR1` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR1_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR2` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR2_R = crate::BitReader;
///Field `PR2` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR2_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR3` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR3_R = crate::BitReader;
///Field `PR3` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR3_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR4` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR4_R = crate::BitReader;
///Field `PR4` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR4_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR5` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR5_R = crate::BitReader;
///Field `PR5` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR5_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR6` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR6_R = crate::BitReader;
///Field `PR6` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR6_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR7` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR7_R = crate::BitReader;
///Field `PR7` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR7_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR8` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR8_R = crate::BitReader;
///Field `PR8` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR8_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR9` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR9_R = crate::BitReader;
///Field `PR9` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR9_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR10` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR10_R = crate::BitReader;
///Field `PR10` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR10_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR11` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR11_R = crate::BitReader;
///Field `PR11` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR11_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR12` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR12_R = crate::BitReader;
///Field `PR12` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR12_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR13` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR13_R = crate::BitReader;
///Field `PR13` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR13_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR14` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR14_R = crate::BitReader;
///Field `PR14` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR14_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR15` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR15_R = crate::BitReader;
///Field `PR15` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR15_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR16` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR16_R = crate::BitReader;
///Field `PR16` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR16_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR17` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR17_R = crate::BitReader;
///Field `PR17` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR17_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR18` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR18_R = crate::BitReader;
///Field `PR18` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR18_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR19` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR19_R = crate::BitReader;
///Field `PR19` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR19_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR20` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR20_R = crate::BitReader;
///Field `PR20` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR20_W<'a, REG> = crate::BitWriter<'a, REG>;
///Field `PR21` reader - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR21_R = crate::BitReader;
///Field `PR21` writer - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
pub type PR21_W<'a, REG> = crate::BitWriter<'a, REG>;
impl R {
    ///Bit 0 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr0(&self) -> PR0_R {
        PR0_R::new((self.bits & 1) != 0)
    }
    ///Bit 1 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr1(&self) -> PR1_R {
        PR1_R::new(((self.bits >> 1) & 1) != 0)
    }
    ///Bit 2 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr2(&self) -> PR2_R {
        PR2_R::new(((self.bits >> 2) & 1) != 0)
    }
    ///Bit 3 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr3(&self) -> PR3_R {
        PR3_R::new(((self.bits >> 3) & 1) != 0)
    }
    ///Bit 4 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr4(&self) -> PR4_R {
        PR4_R::new(((self.bits >> 4) & 1) != 0)
    }
    ///Bit 5 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr5(&self) -> PR5_R {
        PR5_R::new(((self.bits >> 5) & 1) != 0)
    }
    ///Bit 6 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr6(&self) -> PR6_R {
        PR6_R::new(((self.bits >> 6) & 1) != 0)
    }
    ///Bit 7 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr7(&self) -> PR7_R {
        PR7_R::new(((self.bits >> 7) & 1) != 0)
    }
    ///Bit 8 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr8(&self) -> PR8_R {
        PR8_R::new(((self.bits >> 8) & 1) != 0)
    }
    ///Bit 9 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr9(&self) -> PR9_R {
        PR9_R::new(((self.bits >> 9) & 1) != 0)
    }
    ///Bit 10 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr10(&self) -> PR10_R {
        PR10_R::new(((self.bits >> 10) & 1) != 0)
    }
    ///Bit 11 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr11(&self) -> PR11_R {
        PR11_R::new(((self.bits >> 11) & 1) != 0)
    }
    ///Bit 12 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr12(&self) -> PR12_R {
        PR12_R::new(((self.bits >> 12) & 1) != 0)
    }
    ///Bit 13 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr13(&self) -> PR13_R {
        PR13_R::new(((self.bits >> 13) & 1) != 0)
    }
    ///Bit 14 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr14(&self) -> PR14_R {
        PR14_R::new(((self.bits >> 14) & 1) != 0)
    }
    ///Bit 15 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr15(&self) -> PR15_R {
        PR15_R::new(((self.bits >> 15) & 1) != 0)
    }
    ///Bit 16 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr16(&self) -> PR16_R {
        PR16_R::new(((self.bits >> 16) & 1) != 0)
    }
    ///Bit 17 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr17(&self) -> PR17_R {
        PR17_R::new(((self.bits >> 17) & 1) != 0)
    }
    ///Bit 18 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr18(&self) -> PR18_R {
        PR18_R::new(((self.bits >> 18) & 1) != 0)
    }
    ///Bit 19 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr19(&self) -> PR19_R {
        PR19_R::new(((self.bits >> 19) & 1) != 0)
    }
    ///Bit 20 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr20(&self) -> PR20_R {
        PR20_R::new(((self.bits >> 20) & 1) != 0)
    }
    ///Bit 21 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr21(&self) -> PR21_R {
        PR21_R::new(((self.bits >> 21) & 1) != 0)
    }
}
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("PR1")
            .field("pr0", &self.pr0())
            .field("pr1", &self.pr1())
            .field("pr2", &self.pr2())
            .field("pr3", &self.pr3())
            .field("pr4", &self.pr4())
            .field("pr5", &self.pr5())
            .field("pr6", &self.pr6())
            .field("pr7", &self.pr7())
            .field("pr8", &self.pr8())
            .field("pr9", &self.pr9())
            .field("pr10", &self.pr10())
            .field("pr11", &self.pr11())
            .field("pr12", &self.pr12())
            .field("pr13", &self.pr13())
            .field("pr14", &self.pr14())
            .field("pr15", &self.pr15())
            .field("pr16", &self.pr16())
            .field("pr17", &self.pr17())
            .field("pr18", &self.pr18())
            .field("pr19", &self.pr19())
            .field("pr20", &self.pr20())
            .field("pr21", &self.pr21())
            .finish()
    }
}
impl W {
    ///Bit 0 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr0(&mut self) -> PR0_W<PR1rs> {
        PR0_W::new(self, 0)
    }
    ///Bit 1 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr1(&mut self) -> PR1_W<PR1rs> {
        PR1_W::new(self, 1)
    }
    ///Bit 2 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr2(&mut self) -> PR2_W<PR1rs> {
        PR2_W::new(self, 2)
    }
    ///Bit 3 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr3(&mut self) -> PR3_W<PR1rs> {
        PR3_W::new(self, 3)
    }
    ///Bit 4 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr4(&mut self) -> PR4_W<PR1rs> {
        PR4_W::new(self, 4)
    }
    ///Bit 5 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr5(&mut self) -> PR5_W<PR1rs> {
        PR5_W::new(self, 5)
    }
    ///Bit 6 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr6(&mut self) -> PR6_W<PR1rs> {
        PR6_W::new(self, 6)
    }
    ///Bit 7 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr7(&mut self) -> PR7_W<PR1rs> {
        PR7_W::new(self, 7)
    }
    ///Bit 8 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr8(&mut self) -> PR8_W<PR1rs> {
        PR8_W::new(self, 8)
    }
    ///Bit 9 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr9(&mut self) -> PR9_W<PR1rs> {
        PR9_W::new(self, 9)
    }
    ///Bit 10 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr10(&mut self) -> PR10_W<PR1rs> {
        PR10_W::new(self, 10)
    }
    ///Bit 11 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr11(&mut self) -> PR11_W<PR1rs> {
        PR11_W::new(self, 11)
    }
    ///Bit 12 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr12(&mut self) -> PR12_W<PR1rs> {
        PR12_W::new(self, 12)
    }
    ///Bit 13 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr13(&mut self) -> PR13_W<PR1rs> {
        PR13_W::new(self, 13)
    }
    ///Bit 14 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr14(&mut self) -> PR14_W<PR1rs> {
        PR14_W::new(self, 14)
    }
    ///Bit 15 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr15(&mut self) -> PR15_W<PR1rs> {
        PR15_W::new(self, 15)
    }
    ///Bit 16 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr16(&mut self) -> PR16_W<PR1rs> {
        PR16_W::new(self, 16)
    }
    ///Bit 17 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr17(&mut self) -> PR17_W<PR1rs> {
        PR17_W::new(self, 17)
    }
    ///Bit 18 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr18(&mut self) -> PR18_W<PR1rs> {
        PR18_W::new(self, 18)
    }
    ///Bit 19 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr19(&mut self) -> PR19_W<PR1rs> {
        PR19_W::new(self, 19)
    }
    ///Bit 20 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr20(&mut self) -> PR20_W<PR1rs> {
        PR20_W::new(self, 20)
    }
    ///Bit 21 - Configurable event inputs x Pending bit This bit is set when the selected edge event arrives on the external interrupt line. This bit is cleared by writing a 1 into the bit or by changing the sensitivity of the edge detector.
    #[inline(always)]
    pub fn pr21(&mut self) -> PR21_W<PR1rs> {
        PR21_W::new(self, 21)
    }
}
/**EXTI pending register

You can [`read`](crate::Reg::read) this register and get [`pr1::R`](R). You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`pr1::W`](W). You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).*/
pub struct PR1rs;
impl crate::RegisterSpec for PR1rs {
    type Ux = u32;
}
///`read()` method returns [`pr1::R`](R) reader structure
impl crate::Readable for PR1rs {}
///`write(|w| ..)` method takes [`pr1::W`](W) writer structure
impl crate::Writable for PR1rs {
    type Safety = crate::Unsafe;
}
///`reset()` method sets PR1 to value 0
impl crate::Resettable for PR1rs {}