#[doc = "Register `CCMR2_Output` reader"]
pub struct R(crate::R<CCMR2_OUTPUT_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<CCMR2_OUTPUT_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<CCMR2_OUTPUT_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<CCMR2_OUTPUT_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `CCMR2_Output` writer"]
pub struct W(crate::W<CCMR2_OUTPUT_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<CCMR2_OUTPUT_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<CCMR2_OUTPUT_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<CCMR2_OUTPUT_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `OC4CE` reader - O24CE"]
pub type OC4CE_R = crate::BitReader<bool>;
#[doc = "Field `OC4CE` writer - O24CE"]
pub type OC4CE_W<'a> = crate::BitWriter<'a, u32, CCMR2_OUTPUT_SPEC, bool, 15>;
#[doc = "OC4M"]
pub use OC3M_A as OC4M_A;
#[doc = "Field `OC4M` reader - OC4M"]
pub use OC3M_R as OC4M_R;
#[doc = "Field `OC4M` writer - OC4M"]
pub use OC3M_W as OC4M_W;
#[doc = "OC4PE\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum OC4PE_A {
#[doc = "0: Preload register on CCR4 disabled. New values written to CCR4 are taken into account immediately"]
Disabled = 0,
#[doc = "1: Preload register on CCR4 enabled. Preload value is loaded into active register on each update event"]
Enabled = 1,
}
impl From<OC4PE_A> for bool {
#[inline(always)]
fn from(variant: OC4PE_A) -> Self {
variant as u8 != 0
}
}
#[doc = "Field `OC4PE` reader - OC4PE"]
pub type OC4PE_R = crate::BitReader<OC4PE_A>;
impl OC4PE_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> OC4PE_A {
match self.bits {
false => OC4PE_A::Disabled,
true => OC4PE_A::Enabled,
}
}
#[doc = "Checks if the value of the field is `Disabled`"]
#[inline(always)]
pub fn is_disabled(&self) -> bool {
*self == OC4PE_A::Disabled
}
#[doc = "Checks if the value of the field is `Enabled`"]
#[inline(always)]
pub fn is_enabled(&self) -> bool {
*self == OC4PE_A::Enabled
}
}
#[doc = "Field `OC4PE` writer - OC4PE"]
pub type OC4PE_W<'a> = crate::BitWriter<'a, u32, CCMR2_OUTPUT_SPEC, OC4PE_A, 11>;
impl<'a> OC4PE_W<'a> {
#[doc = "Preload register on CCR4 disabled. New values written to CCR4 are taken into account immediately"]
#[inline(always)]
pub fn disabled(self) -> &'a mut W {
self.variant(OC4PE_A::Disabled)
}
#[doc = "Preload register on CCR4 enabled. Preload value is loaded into active register on each update event"]
#[inline(always)]
pub fn enabled(self) -> &'a mut W {
self.variant(OC4PE_A::Enabled)
}
}
#[doc = "Field `OC4FE` reader - OC4FE"]
pub type OC4FE_R = crate::BitReader<bool>;
#[doc = "Field `OC4FE` writer - OC4FE"]
pub type OC4FE_W<'a> = crate::BitWriter<'a, u32, CCMR2_OUTPUT_SPEC, bool, 10>;
#[doc = "CC4S\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum CC4S_A {
#[doc = "0: CC4 channel is configured as output"]
Output = 0,
}
impl From<CC4S_A> for u8 {
#[inline(always)]
fn from(variant: CC4S_A) -> Self {
variant as _
}
}
#[doc = "Field `CC4S` reader - CC4S"]
pub type CC4S_R = crate::FieldReader<u8, CC4S_A>;
impl CC4S_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> Option<CC4S_A> {
match self.bits {
0 => Some(CC4S_A::Output),
_ => None,
}
}
#[doc = "Checks if the value of the field is `Output`"]
#[inline(always)]
pub fn is_output(&self) -> bool {
*self == CC4S_A::Output
}
}
#[doc = "Field `CC4S` writer - CC4S"]
pub type CC4S_W<'a> = crate::FieldWriter<'a, u32, CCMR2_OUTPUT_SPEC, u8, CC4S_A, 2, 8>;
impl<'a> CC4S_W<'a> {
#[doc = "CC4 channel is configured as output"]
#[inline(always)]
pub fn output(self) -> &'a mut W {
self.variant(CC4S_A::Output)
}
}
#[doc = "Field `OC3CE` reader - OC3CE"]
pub type OC3CE_R = crate::BitReader<bool>;
#[doc = "Field `OC3CE` writer - OC3CE"]
pub type OC3CE_W<'a> = crate::BitWriter<'a, u32, CCMR2_OUTPUT_SPEC, bool, 7>;
#[doc = "OC3M\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum OC3M_A {
#[doc = "0: The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive"]
Frozen = 0,
#[doc = "1: Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1"]
ActiveOnMatch = 1,
#[doc = "2: Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved"]
InactiveOnMatch = 2,
#[doc = "3: OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved"]
Toggle = 3,
#[doc = "4: OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF"]
ForceInactive = 4,
#[doc = "5: OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF"]
ForceActive = 5,
#[doc = "6: In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down"]
PwmMode1 = 6,
#[doc = "7: Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1"]
PwmMode2 = 7,
}
impl From<OC3M_A> for u8 {
#[inline(always)]
fn from(variant: OC3M_A) -> Self {
variant as _
}
}
#[doc = "Field `OC3M` reader - OC3M"]
pub type OC3M_R = crate::FieldReader<u8, OC3M_A>;
impl OC3M_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> OC3M_A {
match self.bits {
0 => OC3M_A::Frozen,
1 => OC3M_A::ActiveOnMatch,
2 => OC3M_A::InactiveOnMatch,
3 => OC3M_A::Toggle,
4 => OC3M_A::ForceInactive,
5 => OC3M_A::ForceActive,
6 => OC3M_A::PwmMode1,
7 => OC3M_A::PwmMode2,
_ => unreachable!(),
}
}
#[doc = "Checks if the value of the field is `Frozen`"]
#[inline(always)]
pub fn is_frozen(&self) -> bool {
*self == OC3M_A::Frozen
}
#[doc = "Checks if the value of the field is `ActiveOnMatch`"]
#[inline(always)]
pub fn is_active_on_match(&self) -> bool {
*self == OC3M_A::ActiveOnMatch
}
#[doc = "Checks if the value of the field is `InactiveOnMatch`"]
#[inline(always)]
pub fn is_inactive_on_match(&self) -> bool {
*self == OC3M_A::InactiveOnMatch
}
#[doc = "Checks if the value of the field is `Toggle`"]
#[inline(always)]
pub fn is_toggle(&self) -> bool {
*self == OC3M_A::Toggle
}
#[doc = "Checks if the value of the field is `ForceInactive`"]
#[inline(always)]
pub fn is_force_inactive(&self) -> bool {
*self == OC3M_A::ForceInactive
}
#[doc = "Checks if the value of the field is `ForceActive`"]
#[inline(always)]
pub fn is_force_active(&self) -> bool {
*self == OC3M_A::ForceActive
}
#[doc = "Checks if the value of the field is `PwmMode1`"]
#[inline(always)]
pub fn is_pwm_mode1(&self) -> bool {
*self == OC3M_A::PwmMode1
}
#[doc = "Checks if the value of the field is `PwmMode2`"]
#[inline(always)]
pub fn is_pwm_mode2(&self) -> bool {
*self == OC3M_A::PwmMode2
}
}
#[doc = "Field `OC3M` writer - OC3M"]
pub type OC3M_W<'a> = crate::FieldWriterSafe<'a, u32, CCMR2_OUTPUT_SPEC, u8, OC3M_A, 3, 4>;
impl<'a> OC3M_W<'a> {
#[doc = "The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the outputs / OpmMode1: Retriggerable OPM mode 1 - In up-counting mode, the channel is active until a trigger event is detected (on TRGI signal). In down-counting mode, the channel is inactive"]
#[inline(always)]
pub fn frozen(self) -> &'a mut W {
self.variant(OC3M_A::Frozen)
}
#[doc = "Set channel to active level on match. OCyREF signal is forced high when the counter matches the capture/compare register / OpmMode2: Inversely to OpmMode1"]
#[inline(always)]
pub fn active_on_match(self) -> &'a mut W {
self.variant(OC3M_A::ActiveOnMatch)
}
#[doc = "Set channel to inactive level on match. OCyREF signal is forced low when the counter matches the capture/compare register / Reserved"]
#[inline(always)]
pub fn inactive_on_match(self) -> &'a mut W {
self.variant(OC3M_A::InactiveOnMatch)
}
#[doc = "OCyREF toggles when TIMx_CNT=TIMx_CCRy / Reserved"]
#[inline(always)]
pub fn toggle(self) -> &'a mut W {
self.variant(OC3M_A::Toggle)
}
#[doc = "OCyREF is forced low / CombinedPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC is the logical OR between OC1REF and OC2REF"]
#[inline(always)]
pub fn force_inactive(self) -> &'a mut W {
self.variant(OC3M_A::ForceInactive)
}
#[doc = "OCyREF is forced high / CombinedPwmMode2: OCyREF has the same behavior as in PWM mode 2. OCyREFC is the logical AND between OC1REF and OC2REF"]
#[inline(always)]
pub fn force_active(self) -> &'a mut W {
self.variant(OC3M_A::ForceActive)
}
#[doc = "In upcounting, channel is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel is inactive as long as TIMx_CNT>TIMx_CCRy else active / AsymmetricPwmMode1: OCyREF has the same behavior as in PWM mode 1. OCyREFC outputs OC1REF when the counter is counting up, OC2REF when it is counting down"]
#[inline(always)]
pub fn pwm_mode1(self) -> &'a mut W {
self.variant(OC3M_A::PwmMode1)
}
#[doc = "Inversely to PwmMode1 / AsymmetricPwmMode2: Inversely to AsymmetricPwmMode1"]
#[inline(always)]
pub fn pwm_mode2(self) -> &'a mut W {
self.variant(OC3M_A::PwmMode2)
}
}
#[doc = "OC3PE\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum OC3PE_A {
#[doc = "0: Preload register on CCR3 disabled. New values written to CCR3 are taken into account immediately"]
Disabled = 0,
#[doc = "1: Preload register on CCR3 enabled. Preload value is loaded into active register on each update event"]
Enabled = 1,
}
impl From<OC3PE_A> for bool {
#[inline(always)]
fn from(variant: OC3PE_A) -> Self {
variant as u8 != 0
}
}
#[doc = "Field `OC3PE` reader - OC3PE"]
pub type OC3PE_R = crate::BitReader<OC3PE_A>;
impl OC3PE_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> OC3PE_A {
match self.bits {
false => OC3PE_A::Disabled,
true => OC3PE_A::Enabled,
}
}
#[doc = "Checks if the value of the field is `Disabled`"]
#[inline(always)]
pub fn is_disabled(&self) -> bool {
*self == OC3PE_A::Disabled
}
#[doc = "Checks if the value of the field is `Enabled`"]
#[inline(always)]
pub fn is_enabled(&self) -> bool {
*self == OC3PE_A::Enabled
}
}
#[doc = "Field `OC3PE` writer - OC3PE"]
pub type OC3PE_W<'a> = crate::BitWriter<'a, u32, CCMR2_OUTPUT_SPEC, OC3PE_A, 3>;
impl<'a> OC3PE_W<'a> {
#[doc = "Preload register on CCR3 disabled. New values written to CCR3 are taken into account immediately"]
#[inline(always)]
pub fn disabled(self) -> &'a mut W {
self.variant(OC3PE_A::Disabled)
}
#[doc = "Preload register on CCR3 enabled. Preload value is loaded into active register on each update event"]
#[inline(always)]
pub fn enabled(self) -> &'a mut W {
self.variant(OC3PE_A::Enabled)
}
}
#[doc = "Field `OC3FE` reader - OC3FE"]
pub type OC3FE_R = crate::BitReader<bool>;
#[doc = "Field `OC3FE` writer - OC3FE"]
pub type OC3FE_W<'a> = crate::BitWriter<'a, u32, CCMR2_OUTPUT_SPEC, bool, 2>;
#[doc = "CC3S\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
#[repr(u8)]
pub enum CC3S_A {
#[doc = "0: CC3 channel is configured as output"]
Output = 0,
}
impl From<CC3S_A> for u8 {
#[inline(always)]
fn from(variant: CC3S_A) -> Self {
variant as _
}
}
#[doc = "Field `CC3S` reader - CC3S"]
pub type CC3S_R = crate::FieldReader<u8, CC3S_A>;
impl CC3S_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> Option<CC3S_A> {
match self.bits {
0 => Some(CC3S_A::Output),
_ => None,
}
}
#[doc = "Checks if the value of the field is `Output`"]
#[inline(always)]
pub fn is_output(&self) -> bool {
*self == CC3S_A::Output
}
}
#[doc = "Field `CC3S` writer - CC3S"]
pub type CC3S_W<'a> = crate::FieldWriter<'a, u32, CCMR2_OUTPUT_SPEC, u8, CC3S_A, 2, 0>;
impl<'a> CC3S_W<'a> {
#[doc = "CC3 channel is configured as output"]
#[inline(always)]
pub fn output(self) -> &'a mut W {
self.variant(CC3S_A::Output)
}
}
#[doc = "Output Compare 3 mode, bit 3\n\nValue on reset: 0"]
#[derive(Clone, Copy, Debug, PartialEq)]
pub enum OC3M_3_A {
#[doc = "0: Normal output compare mode (modes 0-7)"]
Normal = 0,
#[doc = "1: Extended output compare mode (modes 7-15)"]
Extended = 1,
}
impl From<OC3M_3_A> for bool {
#[inline(always)]
fn from(variant: OC3M_3_A) -> Self {
variant as u8 != 0
}
}
#[doc = "Field `OC3M_3` reader - Output Compare 3 mode, bit 3"]
pub type OC3M_3_R = crate::BitReader<OC3M_3_A>;
impl OC3M_3_R {
#[doc = "Get enumerated values variant"]
#[inline(always)]
pub fn variant(&self) -> OC3M_3_A {
match self.bits {
false => OC3M_3_A::Normal,
true => OC3M_3_A::Extended,
}
}
#[doc = "Checks if the value of the field is `Normal`"]
#[inline(always)]
pub fn is_normal(&self) -> bool {
*self == OC3M_3_A::Normal
}
#[doc = "Checks if the value of the field is `Extended`"]
#[inline(always)]
pub fn is_extended(&self) -> bool {
*self == OC3M_3_A::Extended
}
}
#[doc = "Field `OC3M_3` writer - Output Compare 3 mode, bit 3"]
pub type OC3M_3_W<'a> = crate::BitWriter<'a, u32, CCMR2_OUTPUT_SPEC, OC3M_3_A, 16>;
impl<'a> OC3M_3_W<'a> {
#[doc = "Normal output compare mode (modes 0-7)"]
#[inline(always)]
pub fn normal(self) -> &'a mut W {
self.variant(OC3M_3_A::Normal)
}
#[doc = "Extended output compare mode (modes 7-15)"]
#[inline(always)]
pub fn extended(self) -> &'a mut W {
self.variant(OC3M_3_A::Extended)
}
}
#[doc = "Output Compare 4 mode, bit 3"]
pub use OC3M_3_A as OC4M_3_A;
#[doc = "Field `OC4M_3` reader - Output Compare 4 mode, bit 3"]
pub use OC3M_3_R as OC4M_3_R;
#[doc = "Field `OC4M_3` writer - Output Compare 4 mode, bit 3"]
pub use OC3M_3_W as OC4M_3_W;
impl R {
#[doc = "Bit 15 - O24CE"]
#[inline(always)]
pub fn oc4ce(&self) -> OC4CE_R {
OC4CE_R::new(((self.bits >> 15) & 1) != 0)
}
#[doc = "Bits 12:14 - OC4M"]
#[inline(always)]
pub fn oc4m(&self) -> OC4M_R {
OC4M_R::new(((self.bits >> 12) & 7) as u8)
}
#[doc = "Bit 11 - OC4PE"]
#[inline(always)]
pub fn oc4pe(&self) -> OC4PE_R {
OC4PE_R::new(((self.bits >> 11) & 1) != 0)
}
#[doc = "Bit 10 - OC4FE"]
#[inline(always)]
pub fn oc4fe(&self) -> OC4FE_R {
OC4FE_R::new(((self.bits >> 10) & 1) != 0)
}
#[doc = "Bits 8:9 - CC4S"]
#[inline(always)]
pub fn cc4s(&self) -> CC4S_R {
CC4S_R::new(((self.bits >> 8) & 3) as u8)
}
#[doc = "Bit 7 - OC3CE"]
#[inline(always)]
pub fn oc3ce(&self) -> OC3CE_R {
OC3CE_R::new(((self.bits >> 7) & 1) != 0)
}
#[doc = "Bits 4:6 - OC3M"]
#[inline(always)]
pub fn oc3m(&self) -> OC3M_R {
OC3M_R::new(((self.bits >> 4) & 7) as u8)
}
#[doc = "Bit 3 - OC3PE"]
#[inline(always)]
pub fn oc3pe(&self) -> OC3PE_R {
OC3PE_R::new(((self.bits >> 3) & 1) != 0)
}
#[doc = "Bit 2 - OC3FE"]
#[inline(always)]
pub fn oc3fe(&self) -> OC3FE_R {
OC3FE_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bits 0:1 - CC3S"]
#[inline(always)]
pub fn cc3s(&self) -> CC3S_R {
CC3S_R::new((self.bits & 3) as u8)
}
#[doc = "Bit 16 - Output Compare 3 mode, bit 3"]
#[inline(always)]
pub fn oc3m_3(&self) -> OC3M_3_R {
OC3M_3_R::new(((self.bits >> 16) & 1) != 0)
}
#[doc = "Bit 24 - Output Compare 4 mode, bit 3"]
#[inline(always)]
pub fn oc4m_3(&self) -> OC4M_3_R {
OC4M_3_R::new(((self.bits >> 24) & 1) != 0)
}
}
impl W {
#[doc = "Bit 15 - O24CE"]
#[inline(always)]
pub fn oc4ce(&mut self) -> OC4CE_W {
OC4CE_W::new(self)
}
#[doc = "Bits 12:14 - OC4M"]
#[inline(always)]
pub fn oc4m(&mut self) -> OC4M_W {
OC4M_W::new(self)
}
#[doc = "Bit 11 - OC4PE"]
#[inline(always)]
pub fn oc4pe(&mut self) -> OC4PE_W {
OC4PE_W::new(self)
}
#[doc = "Bit 10 - OC4FE"]
#[inline(always)]
pub fn oc4fe(&mut self) -> OC4FE_W {
OC4FE_W::new(self)
}
#[doc = "Bits 8:9 - CC4S"]
#[inline(always)]
pub fn cc4s(&mut self) -> CC4S_W {
CC4S_W::new(self)
}
#[doc = "Bit 7 - OC3CE"]
#[inline(always)]
pub fn oc3ce(&mut self) -> OC3CE_W {
OC3CE_W::new(self)
}
#[doc = "Bits 4:6 - OC3M"]
#[inline(always)]
pub fn oc3m(&mut self) -> OC3M_W {
OC3M_W::new(self)
}
#[doc = "Bit 3 - OC3PE"]
#[inline(always)]
pub fn oc3pe(&mut self) -> OC3PE_W {
OC3PE_W::new(self)
}
#[doc = "Bit 2 - OC3FE"]
#[inline(always)]
pub fn oc3fe(&mut self) -> OC3FE_W {
OC3FE_W::new(self)
}
#[doc = "Bits 0:1 - CC3S"]
#[inline(always)]
pub fn cc3s(&mut self) -> CC3S_W {
CC3S_W::new(self)
}
#[doc = "Bit 16 - Output Compare 3 mode, bit 3"]
#[inline(always)]
pub fn oc3m_3(&mut self) -> OC3M_3_W {
OC3M_3_W::new(self)
}
#[doc = "Bit 24 - Output Compare 4 mode, bit 3"]
#[inline(always)]
pub fn oc4m_3(&mut self) -> OC4M_3_W {
OC4M_3_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "capture/compare mode register 2 (output mode)\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [ccmr2_output](index.html) module"]
pub struct CCMR2_OUTPUT_SPEC;
impl crate::RegisterSpec for CCMR2_OUTPUT_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [ccmr2_output::R](R) reader structure"]
impl crate::Readable for CCMR2_OUTPUT_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [ccmr2_output::W](W) writer structure"]
impl crate::Writable for CCMR2_OUTPUT_SPEC {
type Writer = W;
}
#[doc = "`reset()` method sets CCMR2_Output to value 0"]
impl crate::Resettable for CCMR2_OUTPUT_SPEC {
#[inline(always)]
fn reset_value() -> Self::Ux {
0
}
}