sh1106 0.5.0

I2C/SPI driver for the SH1106 OLED display controller
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104

//! Draw a square, circle and triangle on the screen using the `embedded_graphics` crate.
//!
//! This example is for the STM32F103 "Blue Pill" board using I2C1.
//!
//! Wiring connections are as follows for a CRIUS-branded display:
//!
//! ```
//!      Display -> Blue Pill
//! (black)  GND -> GND
//! (red)    +5V -> VCC
//! (yellow) SDA -> PB9
//! (green)  SCL -> PB8
//! ```
//!
//! Run on a Blue Pill with `cargo run --example graphics`.

#![no_std]
#![no_main]

use cortex_m_rt::{entry, exception, ExceptionFrame};
use embedded_graphics::{
    pixelcolor::BinaryColor,
    prelude::*,
    primitives::{Circle, Line, PrimitiveStyle, Rectangle},
};
use panic_semihosting as _;
use sh1106::{prelude::*, Builder};
use stm32f1xx_hal::{
    i2c::{BlockingI2c, DutyCycle, Mode},
    prelude::*,
    stm32,
};

#[entry]
fn main() -> ! {
    let dp = stm32::Peripherals::take().unwrap();

    let mut flash = dp.FLASH.constrain();
    let mut rcc = dp.RCC.constrain();

    let clocks = rcc.cfgr.freeze(&mut flash.acr);

    let mut afio = dp.AFIO.constrain(&mut rcc.apb2);

    let mut gpiob = dp.GPIOB.split(&mut rcc.apb2);

    let scl = gpiob.pb8.into_alternate_open_drain(&mut gpiob.crh);
    let sda = gpiob.pb9.into_alternate_open_drain(&mut gpiob.crh);

    let i2c = BlockingI2c::i2c1(
        dp.I2C1,
        (scl, sda),
        &mut afio.mapr,
        Mode::Fast {
            frequency: 100.khz().into(),
            duty_cycle: DutyCycle::Ratio2to1,
        },
        clocks,
        &mut rcc.apb1,
        1000,
        10,
        1000,
        1000,
    );

    let mut display: GraphicsMode<_> = Builder::new().connect_i2c(i2c).into();

    display.init().unwrap();
    display.flush().unwrap();

    Line::new(Point::new(8, 16 + 16), Point::new(8 + 16, 16 + 16))
        .into_styled(PrimitiveStyle::with_stroke(BinaryColor::On, 1))
        .draw(&mut display)
        .unwrap();

    Line::new(Point::new(8, 16 + 16), Point::new(8 + 8, 16))
        .into_styled(PrimitiveStyle::with_stroke(BinaryColor::On, 1))
        .draw(&mut display)
        .unwrap();

    Line::new(Point::new(8 + 16, 16 + 16), Point::new(8 + 8, 16))
        .into_styled(PrimitiveStyle::with_stroke(BinaryColor::On, 1))
        .draw(&mut display)
        .unwrap();

    Rectangle::with_corners(Point::new(48, 16), Point::new(48 + 16, 16 + 16))
        .into_styled(PrimitiveStyle::with_stroke(BinaryColor::On, 1))
        .draw(&mut display)
        .unwrap();

    Circle::new(Point::new(88, 16), 16)
        .into_styled(PrimitiveStyle::with_stroke(BinaryColor::On, 1))
        .draw(&mut display)
        .unwrap();

    display.flush().unwrap();

    loop {}
}

#[exception]
fn HardFault(ef: &ExceptionFrame) -> ! {
    panic!("{:#?}", ef);
}