restricted system commands enabled.
**ts-errors.tex
(./ts-errors.tex
! You can't \insert255.
<to be read again>
{
l.5 \insert255{
x}
I'm changing to \insert0; box \outputbox is special.
Overfull \hbox (5.2778pt too wide) in paragraph at lines 5--5
[]\tenrm x
\hbox(4.30554+0.0)x0.0, direction TLT
.\localpar
..\localinterlinepenalty=0
..\localbrokenpenalty=0
..\localleftbox=null
..\localrightbox=null
.\hbox(0.0+0.0)x0.0, direction TLT
.\tenrm x
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
! You can't use `\vadjust' in vertical mode.
l.6 \vadjust
{x}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `\hrule' here except with leaders.
l.7 \setbox0\hbox{\hrule
}
To put a horizontal rule in an hbox or an alignment,
you should use \leaders or \hrulefill (see The TeXbook).
! Leaders not followed by proper glue.
<to be read again>
\vskip
l.8 \setbox0\hbox{\leaders\hbox{}\vskip
1pt}
You should say `\leaders <box or rule><hskip or vskip>'.
I found the <box or rule>, but there's no suitable
<hskip or vskip>, so I'm ignoring these leaders.
! Missing } inserted.
<inserted text>
}
...
l.8 \setbox0\hbox{\leaders\hbox{}\vskip
1pt}
I've inserted something that you may have forgotten.
(See the <inserted text> above.)
With luck, this will get me unwedged. But if you
really didn't forget anything, try typing `2' now; then
my insertion and my current dilemma will both disappear.
Overfull \hbox (5.2778pt too wide) in paragraph at lines 6--8
[]\tenrm x
\hbox(4.30554+0.0)x0.0, direction TLT
.\localpar
..\localinterlinepenalty=0
..\localbrokenpenalty=0
..\localleftbox=null
..\localrightbox=null
.\hbox(0.0+0.0)x0.0, direction TLT
.\tenrm x
.\glue(\rightskip) 0.0
! Insertions can only be added to a vbox.
<inserted text> \par
...
l.8 \setbox0\hbox{\leaders\hbox{}\vskip
1pt}
Tut tut: You're trying to \insert into a
\box register that now contains an \hbox.
Proceed, and I'll discard its present contents.
The following box has been deleted:
\hbox(0.0+0.0)x0.0, direction TLT
! Too many }'s.
<recently read> }
l.8 \setbox0\hbox{\leaders\hbox{}\vskip1pt}
You've closed more groups than you opened.
Such booboos are generally harmless, so keep going.
! Missing } inserted.
<inserted text>
}
...
l.9 \setbox1\vbox{}\setbox0\hbox{\unvbox
1}
I've inserted something that you may have forgotten.
(See the <inserted text> above.)
With luck, this will get me unwedged. But if you
really didn't forget anything, try typing `2' now; then
my insertion and my current dilemma will both disappear.
! Too many }'s.
<recently read> }
l.9 \setbox1\vbox{}\setbox0\hbox{\unvbox1}
You've closed more groups than you opened.
Such booboos are generally harmless, so keep going.
! You can't use `\unkern' in vertical mode.
l.10 \setbox0\lastbox \unskip \unkern
\unpenalty
Sorry...I usually can't take things from the current page.
Try `I\kern-\lastkern' instead.
! You can't use `\unpenalty' in vertical mode.
l.10 \setbox0\lastbox \unskip \unkern \unpenalty
Sorry...I usually can't take things from the current page.
Perhaps you can make the output routine do it.
! Improper discretionary list.
<recently read> }
l.11 \setbox0\hbox{\discretionary{\penalty3}
{}{}}
Discretionary lists must contain only boxes and kerns.
The following discretionary sublist has been deleted:
\penalty 3
> \box0=
\hbox(0.0+0.0)x0.0, direction TLT
.\discretionary (penalty 0)
! OK.
l.12 \showbox0
! Infinite glue shrinkage found in a paragraph.
l.14 \setbox0\vbox{x\hskip 0pt minus 1fil x\par
}
The paragraph just ended includes some glue that has
infinite shrinkability, e.g., `\hskip 0pt minus 1fil'.
Such glue doesn't belong there---it allows a paragraph
of any length to fit on one line. But it's safe to proceed,
since the offensive shrinkability has been made finite.
Underfull \hbox (badness 10000) in paragraph at lines 14--14
[]\tenrm x x
\hbox(4.30554+0.0)x100.0, direction TLT
.\localpar
..\localinterlinepenalty=0
..\localbrokenpenalty=0
..\localleftbox=null
..\localrightbox=null
.\hbox(0.0+0.0)x0.0, direction TLT
.\tenrm x
.\glue 0.0 minus 1.0
.\tenrm x
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
Overfull \hbox (14.8334pt too wide) detected at line 15
\tenrm xxx|
\hbox(4.30554+0.0)x1.0, direction TLT
.\tenrm x
.\tenrm x
.\tenrm x
.\rule(*+*)x5.0
> \box0=
\hbox(4.30554+0.0)x1.0, direction TLT
.\tenrm x
.\tenrm x
.\tenrm x
.\rule(*+*)x5.0
! OK.
l.15 \setbox0\hbox to 1pt{xxx}\showbox0
! Extra alignment tab has been changed to \cr.
<template> \endtemplate
l.16 \setbox0\vbox{\halign{#&#\cr a&b&
c\cr}}
You have given more \span or & marks than there were
in the preamble to the \halign or \valign now in progress.
So I'll assume that you meant to type \cr instead.
! \vsplit needs a \vbox.
l.19 \setbox0\hbox{a}\setbox1\vsplit0 to 1pt
The box you are trying to split is an \hbox.
i can't split such a box, so I''ll leave it alone.
! Infinite glue shrinkage found in box being split.
l.20 \setbox0\vbox{\vss}\setbox1\vsplit0 to 1pt
The box you are \vsplitting contains some infinitely
shrinkable glue, e.g., `\vss' or `\vskip 0pt minus 1fil'.
Such glue doesn't belong there; but you can safely proceed,
since the offensive shrinkability has been made finite.
Overfull \vbox (8.55553pt too high) detected at line 21
\vbox(2.0+0.0)x5.2778, direction TLT
.\hbox(4.30554+0.0)x5.2778, direction TLT
..\tenrm x
.\glue(\lineskip) 0.0
.\hbox(4.30554+1.94444)x5.2778, direction TLT
..\tenrm y
Underfull \vbox (badness 10000) detected at line 22
\vbox(20.0+0.0)x5.2778, glue set 15.69446, direction TLT
.\hbox(4.30554+0.0)x5.2778, direction TLT
..\tenrm x
.\glue 0.0 plus 1.0
Overfull \vbox (8.55553pt too high) detected at line 23
\vbox(1.0+0.0)x5.2778, glue set - 1.0, direction TLT
.\hbox(4.30554+0.0)x5.2778, direction TLT
..\tenrm x
.\glue 0.0 minus 1.0
.\glue(\lineskip) 0.0
.\hbox(4.30554+1.94444)x5.2778, direction TLT
..\tenrm y
! Misplaced \noalign.
l.24 \noalign
\omit & \cr \span \endcsname
I expect to see \noalign only after the \cr of
an alignment. Proceed, and I'll ignore this case.
! Misplaced \omit.
l.24 \noalign \omit
& \cr \span \endcsname
I expect to see \omit only after tab marks or the \cr of
an alignment. Proceed, and I'll ignore this case.
! Misplaced alignment tab character &.
l.24 \noalign \omit &
\cr \span \endcsname
I can't figure out why you would want to use a tab mark
here. If you just want an ampersand, the remedy is
simple: Just type `I\&' now. But if some right brace
up above has ended a previous alignment prematurely,
you're probably due for more error messages, and you
might try typing `S' now just to see what is salvageable.
! Misplaced \cr.
l.24 \noalign \omit & \cr
\span \endcsname
I can't figure out why you would want to use a tab mark
or \cr or \span just now. If something like a right brace
up above has ended a previous alignment prematurely,
you're probably due for more error messages, and you
might try typing `S' now just to see what is salvageable.
! Misplaced \span.
l.24 \noalign \omit & \cr \span
\endcsname
I can't figure out why you would want to use a tab mark
or \cr or \span just now. If something like a right brace
up above has ended a previous alignment prematurely,
you're probably due for more error messages, and you
might try typing `S' now just to see what is salvageable.
! Extra \endcsname.
l.24 \noalign \omit & \cr \span \endcsname
I'm ignoring this, since I wasn't doing a \csname.
! You can't use `\lower' in vertical mode.
l.25 \moveleft 1pt\hbox{}\lower
1pt\hbox{}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! You can't use `\moveleft' in restricted horizontal mode.
l.26 \setbox0\hbox{\moveleft
1pt\hbox{}}
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn't ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing `I}' or `I$' or `I\par'.
! Leaders not followed by proper glue.
<to be read again>
\vfil
l.27 \leaders\vrule\vfil
You should say `\leaders <box or rule><hskip or vskip>'.
I found the <box or rule>, but there's no suitable
<hskip or vskip>, so I'm ignoring these leaders.
Underfull \hbox (badness 10000) in paragraph at lines 25--27
[]\tenrm 1pt[]
\hbox(6.44444+1.94444)x100.0, glue set 49.33362, direction TLT
.\localpar
..\localinterlinepenalty=0
..\localbrokenpenalty=0
..\localleftbox=null
..\localrightbox=null
.\hbox(0.0+0.0)x0.0, direction TLT
.\tenrm 1
.\tenrm p
.\tenrm t
.\hbox(0.0+0.0)x0.0, direction TLT
.\glue(\spaceskip) 3.33333 plus 1.66666 minus 1.11111
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
! Leaders not followed by proper glue.
<to be read again>
\hskip
l.28 \leaders\hbox{}\hskip
1pt\par
You should say `\leaders <box or rule><hskip or vskip>'.
I found the <box or rule>, but there's no suitable
<hskip or vskip>, so I'm ignoring these leaders.
Underfull \hbox (badness 10000) in paragraph at lines 28--28
[]
\hbox(0.0+0.0)x100.0, direction TLT
.\localpar
..\localinterlinepenalty=0
..\localbrokenpenalty=0
..\localleftbox=null
..\localrightbox=null
.\hbox(0.0+0.0)x0.0, direction TLT
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
### vertical mode entered at line 0
### current page:
\glue(\topskip) 0.0
\hbox(0.0+0.0)x100.0, direction TLT
.\localpar
..\localinterlinepenalty=0
..\localbrokenpenalty=0
..\localleftbox=null
..\localrightbox=null
.\hbox(0.0+0.0)x0.0, direction TLT
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0
total height 0.0
goal height 0.0
prevdepth 0.0, prevgraf 1 line
! OK.
l.29 \showlists
)
No pages of output.