ra6m3-pac 0.3.0

/*
DISCLAIMER
This software is supplied by Renesas Electronics Corporation and is only intended for use with Renesas products.
No other uses are authorized. This software is owned by Renesas Electronics Corporation and is protected under all
applicable laws, including copyright laws.
THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING THIS SOFTWARE, WHETHER EXPRESS, IMPLIED
OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NON-INFRINGEMENT.  ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY
LAW, NEITHER RENESAS ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR
ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Renesas reserves the right, without notice, to make changes to this software and to discontinue the availability
of this software. By using this software, you agree to the additional terms and conditions found by accessing the
following link:
http://www.renesas.com/disclaimer

*/
// Generated from SVD 1.2, with svd2pac 0.6.1 on Sun, 15 Mar 2026 07:12:21 +0000

#![allow(clippy::identity_op)]
#![allow(clippy::module_inception)]
#![allow(clippy::derivable_impls)]
#[allow(unused_imports)]
use crate::common::sealed;
#[allow(unused_imports)]
use crate::common::*;
#[doc = r"PWM Delay Generation Circuit"]
unsafe impl ::core::marker::Send for super::GptOdc {}
unsafe impl ::core::marker::Sync for super::GptOdc {}
impl super::GptOdc {
    #[allow(unused)]
    #[inline(always)]
    pub(crate) const fn _svd2pac_as_ptr(&self) -> *mut u8 {
        self.ptr
    }

    #[doc = "PWM Output Delay Control Register"]
    #[inline(always)]
    pub const fn gtdlycr(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlycr_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlycr_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0usize),
            )
        }
    }

    #[doc = "PWM Output Delay Control Register2"]
    #[inline(always)]
    pub const fn gtdlycr2(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlycr2_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlycr2_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(2usize),
            )
        }
    }

    #[doc = "GTIOC%sA Rising Output Delay Register"]
    #[inline(always)]
    pub const fn gtdlyra(
        &self,
    ) -> &'static crate::common::ClusterRegisterArray<
        crate::common::Reg<self::Gtdlyra_SPEC, crate::common::RW>,
        4,
        0x4,
    > {
        unsafe {
            crate::common::ClusterRegisterArray::from_ptr(self._svd2pac_as_ptr().add(0x18usize))
        }
    }
    #[inline(always)]
    pub const fn gtdlyr0a(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyra_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyra_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x18usize),
            )
        }
    }
    #[inline(always)]
    pub const fn gtdlyr1a(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyra_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyra_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x1cusize),
            )
        }
    }
    #[inline(always)]
    pub const fn gtdlyr2a(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyra_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyra_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x20usize),
            )
        }
    }
    #[inline(always)]
    pub const fn gtdlyr3a(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyra_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyra_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x24usize),
            )
        }
    }

    #[doc = "GTIOC%sB Rising Output Delay Register"]
    #[inline(always)]
    pub const fn gtdlyrb(
        &self,
    ) -> &'static crate::common::ClusterRegisterArray<
        crate::common::Reg<self::Gtdlyrb_SPEC, crate::common::RW>,
        4,
        0x4,
    > {
        unsafe {
            crate::common::ClusterRegisterArray::from_ptr(self._svd2pac_as_ptr().add(0x1ausize))
        }
    }
    #[inline(always)]
    pub const fn gtdlyr0b(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyrb_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyrb_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x1ausize),
            )
        }
    }
    #[inline(always)]
    pub const fn gtdlyr1b(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyrb_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyrb_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x1eusize),
            )
        }
    }
    #[inline(always)]
    pub const fn gtdlyr2b(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyrb_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyrb_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x22usize),
            )
        }
    }
    #[inline(always)]
    pub const fn gtdlyr3b(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyrb_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyrb_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x26usize),
            )
        }
    }

    #[doc = "GTIOC%sA Falling Output Delay Register"]
    #[inline(always)]
    pub const fn gtdlyfa(
        &self,
    ) -> &'static crate::common::ClusterRegisterArray<
        crate::common::Reg<self::Gtdlyfa_SPEC, crate::common::RW>,
        4,
        0x4,
    > {
        unsafe {
            crate::common::ClusterRegisterArray::from_ptr(self._svd2pac_as_ptr().add(0x28usize))
        }
    }
    #[inline(always)]
    pub const fn gtdlyf0a(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyfa_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyfa_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x28usize),
            )
        }
    }
    #[inline(always)]
    pub const fn gtdlyf1a(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyfa_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyfa_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x2cusize),
            )
        }
    }
    #[inline(always)]
    pub const fn gtdlyf2a(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyfa_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyfa_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x30usize),
            )
        }
    }
    #[inline(always)]
    pub const fn gtdlyf3a(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyfa_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyfa_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x34usize),
            )
        }
    }

    #[doc = "GTIOC%sB Falling Output Delay Register"]
    #[inline(always)]
    pub const fn gtdlyfb(
        &self,
    ) -> &'static crate::common::ClusterRegisterArray<
        crate::common::Reg<self::Gtdlyfb_SPEC, crate::common::RW>,
        4,
        0x4,
    > {
        unsafe {
            crate::common::ClusterRegisterArray::from_ptr(self._svd2pac_as_ptr().add(0x2ausize))
        }
    }
    #[inline(always)]
    pub const fn gtdlyf0b(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyfb_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyfb_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x2ausize),
            )
        }
    }
    #[inline(always)]
    pub const fn gtdlyf1b(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyfb_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyfb_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x2eusize),
            )
        }
    }
    #[inline(always)]
    pub const fn gtdlyf2b(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyfb_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyfb_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x32usize),
            )
        }
    }
    #[inline(always)]
    pub const fn gtdlyf3b(
        &self,
    ) -> &'static crate::common::Reg<self::Gtdlyfb_SPEC, crate::common::RW> {
        unsafe {
            crate::common::Reg::<self::Gtdlyfb_SPEC, crate::common::RW>::from_ptr(
                self._svd2pac_as_ptr().add(0x36usize),
            )
        }
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Gtdlycr_SPEC;
impl crate::sealed::RegSpec for Gtdlycr_SPEC {
    type DataType = u16;
}

#[doc = "PWM Output Delay Control Register"]
pub type Gtdlycr = crate::RegValueT<Gtdlycr_SPEC>;

impl Gtdlycr {
    #[doc = "PWM Delay Generation Circuit Reset"]
    #[inline(always)]
    pub fn dlyrst(
        self,
    ) -> crate::common::RegisterField<
        1,
        0x1,
        1,
        0,
        gtdlycr::Dlyrst,
        gtdlycr::Dlyrst,
        Gtdlycr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            1,
            0x1,
            1,
            0,
            gtdlycr::Dlyrst,
            gtdlycr::Dlyrst,
            Gtdlycr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "DLL Operation Enable"]
    #[inline(always)]
    pub fn dllen(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x1,
        1,
        0,
        gtdlycr::Dllen,
        gtdlycr::Dllen,
        Gtdlycr_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x1,
            1,
            0,
            gtdlycr::Dllen,
            gtdlycr::Dllen,
            Gtdlycr_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Gtdlycr {
    #[inline(always)]
    fn default() -> Gtdlycr {
        <crate::RegValueT<Gtdlycr_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod gtdlycr {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dlyrst_SPEC;
    pub type Dlyrst = crate::EnumBitfieldStruct<u8, Dlyrst_SPEC>;
    impl Dlyrst {
        #[doc = "Normal operation"]
        pub const _0: Self = Self::new(0);

        #[doc = "Reset"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dllen_SPEC;
    pub type Dllen = crate::EnumBitfieldStruct<u8, Dllen_SPEC>;
    impl Dllen {
        #[doc = "Disable DLL operation"]
        pub const _0: Self = Self::new(0);

        #[doc = "Enable DLL operation"]
        pub const _1: Self = Self::new(1);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Gtdlycr2_SPEC;
impl crate::sealed::RegSpec for Gtdlycr2_SPEC {
    type DataType = u16;
}

#[doc = "PWM Output Delay Control Register2"]
pub type Gtdlycr2 = crate::RegValueT<Gtdlycr2_SPEC>;

impl Gtdlycr2 {
    #[doc = "PWM Delay Generation Circuit enable for channel 3"]
    #[inline(always)]
    pub fn dlyen3(
        self,
    ) -> crate::common::RegisterField<
        11,
        0x1,
        1,
        0,
        gtdlycr2::Dlyen3,
        gtdlycr2::Dlyen3,
        Gtdlycr2_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            11,
            0x1,
            1,
            0,
            gtdlycr2::Dlyen3,
            gtdlycr2::Dlyen3,
            Gtdlycr2_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "PWM Delay Generation Circuit enable for channel 2"]
    #[inline(always)]
    pub fn dlyen2(
        self,
    ) -> crate::common::RegisterField<
        10,
        0x1,
        1,
        0,
        gtdlycr2::Dlyen2,
        gtdlycr2::Dlyen2,
        Gtdlycr2_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            10,
            0x1,
            1,
            0,
            gtdlycr2::Dlyen2,
            gtdlycr2::Dlyen2,
            Gtdlycr2_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "PWM Delay Generation Circuit enable for channel 1"]
    #[inline(always)]
    pub fn dlyen1(
        self,
    ) -> crate::common::RegisterField<
        9,
        0x1,
        1,
        0,
        gtdlycr2::Dlyen1,
        gtdlycr2::Dlyen1,
        Gtdlycr2_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            9,
            0x1,
            1,
            0,
            gtdlycr2::Dlyen1,
            gtdlycr2::Dlyen1,
            Gtdlycr2_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "PWM Delay Generation Circuit enable for channel 0"]
    #[inline(always)]
    pub fn dlyen0(
        self,
    ) -> crate::common::RegisterField<
        8,
        0x1,
        1,
        0,
        gtdlycr2::Dlyen0,
        gtdlycr2::Dlyen0,
        Gtdlycr2_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            8,
            0x1,
            1,
            0,
            gtdlycr2::Dlyen0,
            gtdlycr2::Dlyen0,
            Gtdlycr2_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "PWM Delay Generation Circuit bypass for channel 3"]
    #[inline(always)]
    pub fn dlybs3(
        self,
    ) -> crate::common::RegisterField<
        3,
        0x1,
        1,
        0,
        gtdlycr2::Dlybs3,
        gtdlycr2::Dlybs3,
        Gtdlycr2_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            3,
            0x1,
            1,
            0,
            gtdlycr2::Dlybs3,
            gtdlycr2::Dlybs3,
            Gtdlycr2_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "PWM Delay Generation Circuit bypass for channel 2"]
    #[inline(always)]
    pub fn dlybs2(
        self,
    ) -> crate::common::RegisterField<
        2,
        0x1,
        1,
        0,
        gtdlycr2::Dlybs2,
        gtdlycr2::Dlybs2,
        Gtdlycr2_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            2,
            0x1,
            1,
            0,
            gtdlycr2::Dlybs2,
            gtdlycr2::Dlybs2,
            Gtdlycr2_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "PWM Delay Generation Circuit bypass for channel 1"]
    #[inline(always)]
    pub fn dlybs1(
        self,
    ) -> crate::common::RegisterField<
        1,
        0x1,
        1,
        0,
        gtdlycr2::Dlybs1,
        gtdlycr2::Dlybs1,
        Gtdlycr2_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            1,
            0x1,
            1,
            0,
            gtdlycr2::Dlybs1,
            gtdlycr2::Dlybs1,
            Gtdlycr2_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }

    #[doc = "PWM Delay Generation Circuit bypass for channel 0"]
    #[inline(always)]
    pub fn dlybs0(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x1,
        1,
        0,
        gtdlycr2::Dlybs0,
        gtdlycr2::Dlybs0,
        Gtdlycr2_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x1,
            1,
            0,
            gtdlycr2::Dlybs0,
            gtdlycr2::Dlybs0,
            Gtdlycr2_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Gtdlycr2 {
    #[inline(always)]
    fn default() -> Gtdlycr2 {
        <crate::RegValueT<Gtdlycr2_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod gtdlycr2 {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dlyen3_SPEC;
    pub type Dlyen3 = crate::EnumBitfieldStruct<u8, Dlyen3_SPEC>;
    impl Dlyen3 {
        #[doc = "Enable delay generation circuit of channel 3"]
        pub const _0: Self = Self::new(0);

        #[doc = "Disable delay generation circuit of channel 3"]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dlyen2_SPEC;
    pub type Dlyen2 = crate::EnumBitfieldStruct<u8, Dlyen2_SPEC>;
    impl Dlyen2 {
        #[doc = "Enable delay generation circuit of channel 2"]
        pub const _0: Self = Self::new(0);

        #[doc = "Disable delay generation circuit of channel 2."]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dlyen1_SPEC;
    pub type Dlyen1 = crate::EnumBitfieldStruct<u8, Dlyen1_SPEC>;
    impl Dlyen1 {
        #[doc = "Enable delay generation circuit of channel 1"]
        pub const _0: Self = Self::new(0);

        #[doc = "Disable delay generation circuit of channel 1."]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dlyen0_SPEC;
    pub type Dlyen0 = crate::EnumBitfieldStruct<u8, Dlyen0_SPEC>;
    impl Dlyen0 {
        #[doc = "Enable delay generation circuit of channel 0"]
        pub const _0: Self = Self::new(0);

        #[doc = "Disable delay generation circuit of channel 0."]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dlybs3_SPEC;
    pub type Dlybs3 = crate::EnumBitfieldStruct<u8, Dlybs3_SPEC>;
    impl Dlybs3 {
        #[doc = "Bypass delay generation circuit of channel 3"]
        pub const _0: Self = Self::new(0);

        #[doc = "Do not bypass delay generation circuit of channel 3."]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dlybs2_SPEC;
    pub type Dlybs2 = crate::EnumBitfieldStruct<u8, Dlybs2_SPEC>;
    impl Dlybs2 {
        #[doc = "Bypass delay generation circuit of channel 2"]
        pub const _0: Self = Self::new(0);

        #[doc = "Do not bypass delay generation circuit of channel 2."]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dlybs1_SPEC;
    pub type Dlybs1 = crate::EnumBitfieldStruct<u8, Dlybs1_SPEC>;
    impl Dlybs1 {
        #[doc = "Bypass delay generation circuit of channel 1"]
        pub const _0: Self = Self::new(0);

        #[doc = "Do not bypass delay generation circuit of channel 1."]
        pub const _1: Self = Self::new(1);
    }
    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dlybs0_SPEC;
    pub type Dlybs0 = crate::EnumBitfieldStruct<u8, Dlybs0_SPEC>;
    impl Dlybs0 {
        #[doc = "Bypass delay generation circuit of channel 0"]
        pub const _0: Self = Self::new(0);

        #[doc = "Do not bypass delay generation circuit of channel 0."]
        pub const _1: Self = Self::new(1);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Gtdlyra_SPEC;
impl crate::sealed::RegSpec for Gtdlyra_SPEC {
    type DataType = u16;
}

#[doc = "GTIOC%sA Rising Output Delay Register"]
pub type Gtdlyra = crate::RegValueT<Gtdlyra_SPEC>;

impl Gtdlyra {
    #[doc = "GTIOCnA Output Rising Edge Delay Setting"]
    #[inline(always)]
    pub fn dly(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x1f,
        1,
        0,
        gtdlyra::Dly,
        gtdlyra::Dly,
        Gtdlyra_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x1f,
            1,
            0,
            gtdlyra::Dly,
            gtdlyra::Dly,
            Gtdlyra_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Gtdlyra {
    #[inline(always)]
    fn default() -> Gtdlyra {
        <crate::RegValueT<Gtdlyra_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod gtdlyra {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dly_SPEC;
    pub type Dly = crate::EnumBitfieldStruct<u8, Dly_SPEC>;
    impl Dly {
        #[doc = "No delay on rising edges"]
        pub const _00000: Self = Self::new(0);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Gtdlyrb_SPEC;
impl crate::sealed::RegSpec for Gtdlyrb_SPEC {
    type DataType = u16;
}

#[doc = "GTIOC%sB Rising Output Delay Register"]
pub type Gtdlyrb = crate::RegValueT<Gtdlyrb_SPEC>;

impl Gtdlyrb {
    #[doc = "GTIOCnB Output Rising Edge Delay Setting"]
    #[inline(always)]
    pub fn dly(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x1f,
        1,
        0,
        gtdlyrb::Dly,
        gtdlyrb::Dly,
        Gtdlyrb_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x1f,
            1,
            0,
            gtdlyrb::Dly,
            gtdlyrb::Dly,
            Gtdlyrb_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Gtdlyrb {
    #[inline(always)]
    fn default() -> Gtdlyrb {
        <crate::RegValueT<Gtdlyrb_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod gtdlyrb {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dly_SPEC;
    pub type Dly = crate::EnumBitfieldStruct<u8, Dly_SPEC>;
    impl Dly {
        #[doc = "No delay on rising edges"]
        pub const _00000: Self = Self::new(0);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Gtdlyfa_SPEC;
impl crate::sealed::RegSpec for Gtdlyfa_SPEC {
    type DataType = u16;
}

#[doc = "GTIOC%sA Falling Output Delay Register"]
pub type Gtdlyfa = crate::RegValueT<Gtdlyfa_SPEC>;

impl Gtdlyfa {
    #[doc = "GTIOCnA Output Falling Edge Delay Setting"]
    #[inline(always)]
    pub fn dly(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x1f,
        1,
        0,
        gtdlyfa::Dly,
        gtdlyfa::Dly,
        Gtdlyfa_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x1f,
            1,
            0,
            gtdlyfa::Dly,
            gtdlyfa::Dly,
            Gtdlyfa_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Gtdlyfa {
    #[inline(always)]
    fn default() -> Gtdlyfa {
        <crate::RegValueT<Gtdlyfa_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod gtdlyfa {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dly_SPEC;
    pub type Dly = crate::EnumBitfieldStruct<u8, Dly_SPEC>;
    impl Dly {
        #[doc = "No delay on rising edges"]
        pub const _00000: Self = Self::new(0);
    }
}
#[doc(hidden)]
#[derive(Copy, Clone, Eq, PartialEq)]
pub struct Gtdlyfb_SPEC;
impl crate::sealed::RegSpec for Gtdlyfb_SPEC {
    type DataType = u16;
}

#[doc = "GTIOC%sB Falling Output Delay Register"]
pub type Gtdlyfb = crate::RegValueT<Gtdlyfb_SPEC>;

impl Gtdlyfb {
    #[doc = "GTIOCnB Output Falling Edge Delay Setting"]
    #[inline(always)]
    pub fn dly(
        self,
    ) -> crate::common::RegisterField<
        0,
        0x1f,
        1,
        0,
        gtdlyfb::Dly,
        gtdlyfb::Dly,
        Gtdlyfb_SPEC,
        crate::common::RW,
    > {
        crate::common::RegisterField::<
            0,
            0x1f,
            1,
            0,
            gtdlyfb::Dly,
            gtdlyfb::Dly,
            Gtdlyfb_SPEC,
            crate::common::RW,
        >::from_register(self, 0)
    }
}
impl ::core::default::Default for Gtdlyfb {
    #[inline(always)]
    fn default() -> Gtdlyfb {
        <crate::RegValueT<Gtdlyfb_SPEC> as RegisterValue<_>>::new(0)
    }
}
pub mod gtdlyfb {

    #[derive(Clone, Copy, Eq, PartialEq, Ord, PartialOrd)]
    pub struct Dly_SPEC;
    pub type Dly = crate::EnumBitfieldStruct<u8, Dly_SPEC>;
    impl Dly {
        #[doc = "No delay on rising edges"]
        pub const _00000: Self = Self::new(0);
    }
}