mavlink-message-definitions 0.6.7

MAVLink message definitions in MAVInspect format
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66

<?xml version="1.0"?>
<mavlink>
  <include>common.xml</include>
  <enums>
    <enum name="UALBERTA_AUTOPILOT_MODE">
      <description>Available autopilot modes for ualberta uav</description>
      <entry value="1" name="MODE_MANUAL_DIRECT">
        <description>Raw input pulse widts sent to output</description>
      </entry>
      <entry value="2" name="MODE_MANUAL_SCALED">
        <description>Inputs are normalized using calibration, the converted back to raw pulse widths for output</description>
      </entry>
      <entry value="3" name="MODE_AUTO_PID_ATT"/>
      <entry value="4" name="MODE_AUTO_PID_VEL"/>
      <entry value="5" name="MODE_AUTO_PID_POS"/>
    </enum>
    <enum name="UALBERTA_NAV_MODE">
      <description>Navigation filter mode</description>
      <entry value="1" name="NAV_AHRS_INIT"/>
      <entry value="2" name="NAV_AHRS">
        <description>AHRS mode</description>
      </entry>
      <entry value="3" name="NAV_INS_GPS_INIT">
        <description>INS/GPS initialization mode</description>
      </entry>
      <entry value="4" name="NAV_INS_GPS">
        <description>INS/GPS mode</description>
      </entry>
    </enum>
    <enum name="UALBERTA_PILOT_MODE">
      <description>Mode currently commanded by pilot</description>
      <entry value="1" name="PILOT_MANUAL"/>
      <entry value="2" name="PILOT_AUTO"/>
      <entry value="3" name="PILOT_ROTO">
        <description> Rotomotion mode </description>
      </entry>
    </enum>
  </enums>
  <messages>
    <message id="220" name="NAV_FILTER_BIAS">
      <description>Accelerometer and Gyro biases from the navigation filter</description>
      <field type="uint64_t" name="usec">Timestamp (microseconds)</field>
      <field type="float" name="accel_0">b_f[0]</field>
      <field type="float" name="accel_1">b_f[1]</field>
      <field type="float" name="accel_2">b_f[2]</field>
      <field type="float" name="gyro_0">b_f[0]</field>
      <field type="float" name="gyro_1">b_f[1]</field>
      <field type="float" name="gyro_2">b_f[2]</field>
    </message>
    <message id="221" name="RADIO_CALIBRATION">
      <description>Complete set of calibration parameters for the radio</description>
      <field type="uint16_t[3]" name="aileron">Aileron setpoints: left, center, right</field>
      <field type="uint16_t[3]" name="elevator">Elevator setpoints: nose down, center, nose up</field>
      <field type="uint16_t[3]" name="rudder">Rudder setpoints: nose left, center, nose right</field>
      <field type="uint16_t[2]" name="gyro">Tail gyro mode/gain setpoints: heading hold, rate mode</field>
      <field type="uint16_t[5]" name="pitch">Pitch curve setpoints (every 25%)</field>
      <field type="uint16_t[5]" name="throttle">Throttle curve setpoints (every 25%)</field>
    </message>
    <message id="222" name="UALBERTA_SYS_STATUS">
      <description>System status specific to ualberta uav</description>
      <field type="uint8_t" name="mode">System mode, see UALBERTA_AUTOPILOT_MODE ENUM</field>
      <field type="uint8_t" name="nav_mode">Navigation mode, see UALBERTA_NAV_MODE ENUM</field>
      <field type="uint8_t" name="pilot">Pilot mode, see UALBERTA_PILOT_MODE</field>
    </message>
  </messages>
</mavlink>