librsync-sys 0.1.4

/*= -*- c-basic-offset: 4; indent-tabs-mode: nil; -*-
 *
 * librsync -- dynamic caching and delta update in HTTP
 *
 * Copyright (C) 2000, 2001 by Martin Pool <mbp@sourcefrog.net>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU Lesser General Public License as published by
 * the Free Software Foundation; either version 2.1 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

                              /*=
                               | Where a calculator on the ENIAC is
                               | equpped with 18,000 vaccuum tubes and
                               | weighs 30 tons, computers in the
                               | future may have only 1,000 vaccuum
                               | tubes and perhaps weigh 1 1/2
                               | tons.
                               |   -- Popular Mechanics, March 1949
                               */

/** \file tube.c
 * A somewhat elastic but fairly small buffer for data passing through a
 * stream.
 *
 * In most cases the iter can adjust to send just as much data will fit. In
 * some cases that would be too complicated, because it has to transmit an
 * integer or something similar. So in that case we stick whatever won't fit
 * into a small buffer.
 *
 * A tube can contain some literal data to go out (typically command bytes),
 * and also an instruction to copy data from the stream's input or from some
 * other location. Both literal data and a copy command can be queued at the
 * same time, but only in that order and at most one of each.
 *
 * \todo As an optimization, write it directly to the stream if possible. But
 * for simplicity don't do that yet.
 *
 * \todo I think our current copy code will lock up if the application only
 * ever calls us with either input or output buffers, and not both. So I guess
 * in that case we might need to copy into some temporary buffer space, and
 * then back out again later. */

#include "config.h"
#include <assert.h>
#include <stdlib.h>
#include <string.h>
#include "librsync.h"
#include "job.h"
#include "stream.h"
#include "trace.h"

static void rs_tube_catchup_write(rs_job_t *job)
{
    rs_buffers_t *stream = job->stream;
    int len = job->write_len;

    assert(len > 0);
    if ((size_t)len > stream->avail_out)
        len = stream->avail_out;
    if (!stream->avail_out) {
        rs_trace("no output space available");
        return;
    }
    memcpy(stream->next_out, job->write_buf, len);
    stream->next_out += len;
    stream->avail_out -= len;
    job->write_len -= len;
    if (job->write_len > 0) {
        /* Still something left in the tube, shuffle it to the front. */
        memmove(job->write_buf, job->write_buf + len, job->write_len);
    }
    rs_trace("wrote %d bytes from tube, %d remaining", len, job->write_len);
}

/** Execute a copy command, taking data from the scoop.
 *
 * \sa rs_tube_catchup_copy() */
static void rs_tube_copy_from_scoop(rs_job_t *job)
{
    rs_buffers_t *stream = job->stream;
    size_t len = job->copy_len;

    assert(len > 0);
    if (len > job->scoop_avail)
        len = job->scoop_avail;
    if (len > stream->avail_out)
        len = stream->avail_out;
    memcpy(stream->next_out, job->scoop_next, len);
    stream->next_out += len;
    stream->avail_out -= len;
    job->scoop_avail -= len;
    job->scoop_next += len;
    job->copy_len -= len;
    rs_trace("caught up on " FMT_SIZE " copied bytes from scoop, " FMT_SIZE
             " remain there, " FMT_LONG " remain to be copied", len,
             job->scoop_avail, job->copy_len);
}

/** Catch up on an outstanding copy command.
 *
 * Takes data from the scoop, and the input (in that order), and writes as much
 * as will fit to the output, up to the limit of the outstanding copy. */
static void rs_tube_catchup_copy(rs_job_t *job)
{
    assert(job->write_len == 0);
    assert(job->copy_len > 0);

    /* If there's data in the scoop, send that first. */
    if (job->scoop_avail && job->copy_len) {
        rs_tube_copy_from_scoop(job);
    }
    /* If there's more to copy and we emptied the scoop, send input. */
    if (job->copy_len && !job->scoop_avail) {
        size_t this_copy = rs_buffers_copy(job->stream, job->copy_len);
        job->copy_len -= this_copy;
        rs_trace("copied " FMT_SIZE " bytes from input buffer, " FMT_LONG
                 " remain to be copied", this_copy, job->copy_len);
    }
}

/** Put whatever will fit from the tube into the output of the stream.
 *
 * \return RS_DONE if the tube is now empty and ready to accept another
 * command, RS_BLOCKED if there is still stuff waiting to go out. */
int rs_tube_catchup(rs_job_t *job)
{
    if (job->write_len) {
        rs_tube_catchup_write(job);
        if (job->write_len)
            return RS_BLOCKED;
    }

    if (job->copy_len) {
        rs_tube_catchup_copy(job);
        if (job->copy_len) {
            if (job->stream->eof_in && !job->stream->avail_in
                && !job->scoop_avail) {
                rs_error
                    ("reached end of file while copying literal data through buffers");
                return RS_INPUT_ENDED;
            }
            return RS_BLOCKED;
        }
    }
    return RS_DONE;
}

/* Check whether there is data in the tube waiting to go out.

   \return true if the previous command has finished doing all its output. */
int rs_tube_is_idle(rs_job_t const *job)
{
    return job->write_len == 0 && job->copy_len == 0;
}

/** Queue up a request to copy through \p len bytes from the input to the
 * output of the stream.
 *
 * The data is copied from the scoop (if there is anything there) or from the
 * input, on the next call to rs_tube_write().
 *
 * We can only accept this request if there is no copy command already pending.
 *
 * \todo Try to do the copy immediately, and return a result. Then, people can
 * try to continue if possible. Is this really required? Callers can just go
 * out and back in again after flushing the tube. */
void rs_tube_copy(rs_job_t *job, int len)
{
    assert(job->copy_len == 0);

    job->copy_len = len;
}

/** Push some data into the tube for storage.
 *
 * The tube's never supposed to get very big, so this will just pop loudly if
 * you do that.
 *
 * We can't accept write data if there's already a copy command in the tube,
 * because the write data comes out first. */
void rs_tube_write(rs_job_t *job, const void *buf, size_t len)
{
    assert(job->copy_len == 0);
    assert(len <= sizeof(job->write_buf) - job->write_len);

    memcpy(job->write_buf + job->write_len, buf, len);
    job->write_len += len;
}