// -*- mode:doc; -*-
// vim: set syntax=asciidoc,tw=0:
coap-client(5)
==============
:doctype: manpage
:man source: coap-client
:man version: @PACKAGE_VERSION@
:man manual: coap-client Manual
NAME
-----
coap-client,
coap-client-gnutls,
coap-client-mbedtls,
coap-client-openssl,
coap-client-notls
- CoAP Client based on libcoap
SYNOPSIS
--------
*coap-client* [*-a* addr] [*-b* [num,]size] [*-e* text] [*-f* file] [*-l* loss]
[*-m* method] [*-o* file] [*-p* port] [*-r*] [*-s duration*]
[*-t* type] [*-v* num] [*-w*] [*-A* type] [*-B* seconds]
[*-G* count] [*-H* hoplimit] [*-K* interval] [*-L* value] [*-N*]
[*-O* num,text] [*-P* scheme://addr[:port]] [*-T* token] [*-U*]
[*-X* size]
[[*-h* match_hint_file] [*-k* key] [*-u* user]]
[[*-c* certfile] [*-j* keyfile] [-n] [*-C* cafile]
[*-J* pkcs11_pin] [*-M* rpk_file] [*-R* trust_casfile]] URI
For *coap-client* versions that use libcoap compiled for different
(D)TLS libraries, *coap-client-notls*, *coap-client-gnutls*,
*coap-client-openssl*, *coap-client-mbedtls* or *coap-client-tinydtls* may be
available. Otherwise, *coap-client* uses the default libcoap (D)TLS support.
DESCRIPTION
-----------
*coap-client* is a CoAP client to communicate with 6LoWPAN devices via
the protocol CoAP (RFC 7252) using the URI given as argument on the
command line. The URI must have the scheme 'coap', 'coap+tcp', 'coaps' or
'coaps+tcp'. 'coaps' and 'coaps+tcp' are only supported when coap-client is
built with support for secure (D)TLS communication.
If 'coaps' or 'coaps+tcp' is being used, provided the CoAP server supports PKI
and is configured with a certificate and private key, the coap-client does not
need to have a Pre-Shared Key (-k) or certificate (-c) configured.
The URI's host part may be a DNS name or a literal IP address. Note that, for
IPv6 address references, angle brackets are required (c.f. EXAMPLES).
OPTIONS - General
-----------------
*-a* addr::
The local address of the interface that has to be used. +
Note: Do not use this option if the interface is likely to be transient -
i.e. it is a tunnel interface that may come and go, as this is likely to
cause "No such device" errors on transmission.
*-b* [num,]size::
The block size to be used in GET/PUT/POST requests (value must be a
multiple of 16 not larger than 1024 as libcoap uses a fixed maximum
PDU size of 1400 bytes). If 'num' is present, the request
chain will start at block 'num'. When the server includes a Block2
option in its response to a GET request, coap-client will automatically
retrieve the subsequent block from the server until there are no more
outstanding blocks for the requested content.
*-e* text::
Include text as payload (use percent-encoding for non-ASCII characters).
*-f* file::
File to send with PUT/POST (use '-' for STDIN).
*-l* list::
Fail to send some datagrams specified by a comma separated list of
numbers or number ranges (debugging only).
*-l* loss%::
Randomly failed to send datagrams with the specified probability - 100%
all datagrams, 0% no datagrams (debugging only).
*-m* method::
The request method for action (get|put|post|delete), default is 'get'.
(Note that the string passed to *-m* is compared case-insensitive.)
*-o* file::
A filename to store data retrieved with GET.
*-p* port::
The port to listen on.
*-r*::
Use reliable protocol (TCP or TLS).
*-s* duration::
Subscribe to / observe the resource specified by URI for the given
'duration' in seconds.
*-t* type::
Content format for given resource for PUT/POST. 'type' must be either
a numeric value reflecting a valid CoAP content format or a string
describing a registered format. The following registered content format
descriptors are supported, with alternative shortcuts given in
parentheses:
text/plain (plain)
application/link-format (link, link-format)
application/xml (xml)
application/octet-stream (binary, octet-stream)
application/exi (exi)
application/json (json)
application/cbor (cbor)
*-v* num::
The verbosity level to use (default 3, maximum is 9). Above 7, there is
increased verbosity in GnuTLS and OpenSSL logging.
*-w*::
Append a newline to received data.
*-A* type::
Accepted media type. 'type' must be either a numeric value reflecting a
valid CoAP content format or a string that specifies a registered format as
described for option *-t*.
*-B* seconds::
Break operation after waiting given seconds (default is 90).
*-G* count ::
Repeat the Request 'count' times with a second delay between each one.
Must have a value between 1 and 255 inclusive. Default is '1'.
*-H* hoplimit::
Set the Hop Limit count to hoplimit for proxies. Must have a value between
1 and 255 inclusive. Default is '16'.
*-K* interval::
Send a ping after interval seconds of inactivity.
If not specified (or 0), keep-alive is disabled (default).
*-L* value::
Sum of one or more COAP_BLOCK_* flag values for different block handling
methods. Default is 1 (COAP_BLOCK_USE_LIBCOAP).
COAP_BLOCK_USE_LIBCOAP 1
COAP_BLOCK_SINGLE_BODY 2
*-N* ::
Send NON-confirmable message. If option *-N* is not specified, a
confirmable message will be sent.
*-O* num,text::
Add option 'num' with contents of 'text' to the request. If the text begins
with 0x, then the hex text (two [0-9a-f] per byte) is converted to binary
data.
*-P* scheme://addr[:port]::
Scheme, address and optional port to define how to connect to a CoAP proxy
(automatically adds Proxy-Uri option to request) to forward the request to.
Scheme is one of coap, coaps, coap+tcp and coaps+tcp.
*-T* token::
Define the initial starting 'token' for the request.
*-U* ::
Never include Uri-Host or Uri-Port options.
*-X* size::
Maximum message size to use for TCP based connections (default is 8388864).
Maximum value of 2^32 -1.
OPTIONS - PSK
-------------
(If supported by underlying (D)TLS library)
*-h* match_hint_file::
This is a file that contains one or more lines of received Identity Hints
to match to use different user identity and associated pre-shared key (PSK)
(comma separated) instead of the *-k key* and *-u user* options. E.g., per
line +
hint_to_match,use_user,with_key +
A line that starts with # is treated as a comment. +
Note: *-k key* and *-u user* still need to be defined for the default case in
case there is no match.
*-k* key::
Pre-shared key for the specified user identity (*-u* option also required).
*-u* user::
User identity to send for pre-shared key mode (*-k* option also required).
OPTIONS - PKI
-------------
(If supported by underlying (D)TLS library)
*Note:* If any one of *certfile*, *keyfile* or *cafile* is in PKCS11 URI
naming format (pkcs11: prefix), then any remaining non PKCS11 URI file
definitions have to be in DER, not PEM, format. Otherwise all of
*certfile*, *keyfile* or *cafile* are in PEM format.
*-c* certfile::
PEM file or PKCS11 URI for the certificate. The private key can also be in
the PEM file, or has the same PKCS11 URI. If not, the private key is defined
by *-j keyfile*.
*-j* keyfile::
PEM file or PKCS11 URI for the private key for the certificate in *-c
certfile* if the parameter is different from certfile in *-c certfile*.
*-n* ::
Disable remote peer certificate checking.
*-C* cafile::
PEM file or PKCS11 URI for the CA certificate that was used to sign the server
certfile. Ideally the client certificate should be signed by the same CA so
that mutual authentication can take place. The contents of cafile are added
to the trusted store of root CAs. Using the *-C* or *-R* options will trigger
the validation of the server certificate unless overridden by the *-n* option.
*-J* pkcs11_pin::
The user pin to unlock access to the PKCS11 token.
*-M* rpk_file::
Raw Public Key (RPK) PEM file or PKCS11 URI that contains both PUBLIC KEY
and PRIVATE KEY or just EC PRIVATE KEY. (GnuTLS and TinyDTLS(PEM) support
only). *-C cafile* or *-R trust_casfile* are not required.
*-R* trust_casfile::
PEM file containing the set of trusted root CAs that are to be used to
validate the server certificate. Alternatively, this can point to a
directory containing a set of CA PEM files. The *-C cafile* CA does not have
to be in this list and is trusted for the validation. Using
*-R trust_casfile* disables common CA mutual authentication which can only
be done by using *-C cafile*. Using the *-C* or *-R* options will will
trigger the validation of the server certificate unless overridden by the
*-n* option.
EXAMPLES
--------
* Example
----
coap-client coap://coap.me
----
Query the resource '/' from server 'coap.me' (using the GET method).
* Example
----
coap-client -m get coap://[::1]/
----
Query the resource '/' on localhost using the 'GET' method to get back the
summary defined attributes.
* Example
----
coap-client -m get coap://[::1]/.well-known/core
----
Query on the resource '.well-known/core' on localhost to get back a list of
the known resources along with their attribute definitions.
* Example
----
echo -n "mode=on" | coap-client -m put \
coap://[2001:db8:c001:f00d:221:2eff:ff00:2704]:5683/actuators/leds?color=r -f-
----
Send text 'mode=on' to resource 'actuators/leds?color=r' on the endpoint with
address '2001:db8:c001:f00d:221:2eff:ff00:2704' and port '5683'. Note that the
port '5683' is the default port and isn't actually required in this instance.
* Example
----
coap-client -m put coap://[fec0::3]/ck -T 3a -t binary -f to_upload
----
Put the contents of file 'to_upload' with content type 'binary' (i.e.
application/octet-stream) into resource 'ck' on 'fec0::3' using a token of
'3a' via the 'PUT' method.
FILES
------
There are no configuration files.
EXIT STATUS
-----------
*0*::
Success
*1*::
Failure (syntax or usage error; configuration error; document
processing failure; unexpected error)
BUGS
-----
Please report bugs on the mailing list for libcoap:
libcoap-developers@lists.sourceforge.net or raise an issue on GitHub at
https://github.com/obgm/libcoap/issues
AUTHORS
-------
The libcoap project <libcoap-developers@lists.sourceforge.net>