fresh-editor 0.1.74

//! Toggle actions and configuration operations for the Editor.
//!
//! This module contains toggle methods and configuration operations:
//! - Toggle line numbers, debug highlights, menu bar
//! - Toggle mouse capture, mouse hover, inlay hints
//! - Reset buffer settings
//! - Config dump, save, and reload

use rust_i18n::t;

use crate::config::Config;
use crate::config_io::{ConfigLayer, ConfigResolver};
use crate::input::keybindings::KeybindingResolver;
use crate::services::lsp::manager::detect_language;

use super::Editor;

impl Editor {
    /// Toggle line numbers in the gutter for the active buffer
    pub fn toggle_line_numbers(&mut self) {
        if let Some(state) = self.buffers.get_mut(&self.active_buffer()) {
            let currently_shown = state.margins.show_line_numbers;
            state.margins.set_line_numbers(!currently_shown);
            if currently_shown {
                self.set_status_message(t!("toggle.line_numbers_hidden").to_string());
            } else {
                // Restore proper width based on buffer size
                let total_lines = state.buffer.line_count().unwrap_or(1);
                state.margins.update_width_for_buffer(total_lines);
                self.set_status_message(t!("toggle.line_numbers_shown").to_string());
            }
        }
    }

    /// Toggle debug highlight mode for the active buffer
    /// When enabled, shows byte positions and highlight span info for debugging
    pub fn toggle_debug_highlights(&mut self) {
        if let Some(state) = self.buffers.get_mut(&self.active_buffer()) {
            state.debug_highlight_mode = !state.debug_highlight_mode;
            if state.debug_highlight_mode {
                self.set_status_message(t!("toggle.debug_mode_on").to_string());
            } else {
                self.set_status_message(t!("toggle.debug_mode_off").to_string());
            }
        }
    }

    /// Toggle menu bar visibility
    pub fn toggle_menu_bar(&mut self) {
        self.menu_bar_visible = !self.menu_bar_visible;
        // When explicitly toggling, clear auto-show state
        self.menu_bar_auto_shown = false;
        // Close any open menu when hiding the menu bar
        if !self.menu_bar_visible {
            self.menu_state.close_menu();
        }
        let status = if self.menu_bar_visible {
            t!("toggle.menu_bar_shown")
        } else {
            t!("toggle.menu_bar_hidden")
        };
        self.set_status_message(status.to_string());
    }

    /// Reset buffer settings (tab_size, use_tabs, show_whitespace_tabs) to config defaults
    pub fn reset_buffer_settings(&mut self) {
        let buffer_id = self.active_buffer();

        // Get the file path to determine language-specific settings
        let file_path = self
            .buffer_metadata
            .get(&buffer_id)
            .and_then(|m| m.file_path().cloned());

        // Determine settings from config (with language fallback)
        let (tab_size, use_tabs, show_whitespace_tabs) = if let Some(path) = &file_path {
            if let Some(language) = detect_language(path, &self.config.languages) {
                if let Some(lang_config) = self.config.languages.get(&language) {
                    (
                        lang_config.tab_size.unwrap_or(self.config.editor.tab_size),
                        lang_config.use_tabs,
                        lang_config.show_whitespace_tabs,
                    )
                } else {
                    (self.config.editor.tab_size, false, true)
                }
            } else {
                (self.config.editor.tab_size, false, true)
            }
        } else {
            (self.config.editor.tab_size, false, true)
        };

        // Apply settings to buffer
        if let Some(state) = self.buffers.get_mut(&buffer_id) {
            state.tab_size = tab_size;
            state.use_tabs = use_tabs;
            state.show_whitespace_tabs = show_whitespace_tabs;
        }

        self.set_status_message(t!("toggle.buffer_settings_reset").to_string());
    }

    /// Toggle mouse capture on/off
    pub fn toggle_mouse_capture(&mut self) {
        use std::io::stdout;

        self.mouse_enabled = !self.mouse_enabled;

        if self.mouse_enabled {
            let _ = crossterm::execute!(stdout(), crossterm::event::EnableMouseCapture);
            self.set_status_message(t!("toggle.mouse_capture_enabled").to_string());
        } else {
            let _ = crossterm::execute!(stdout(), crossterm::event::DisableMouseCapture);
            self.set_status_message(t!("toggle.mouse_capture_disabled").to_string());
        }
    }

    /// Check if mouse capture is enabled
    pub fn is_mouse_enabled(&self) -> bool {
        self.mouse_enabled
    }

    /// Toggle mouse hover for LSP on/off
    pub fn toggle_mouse_hover(&mut self) {
        self.config.editor.mouse_hover_enabled = !self.config.editor.mouse_hover_enabled;

        if self.config.editor.mouse_hover_enabled {
            self.set_status_message(t!("toggle.mouse_hover_enabled").to_string());
        } else {
            // Clear any pending hover state
            self.mouse_state.lsp_hover_state = None;
            self.mouse_state.lsp_hover_request_sent = false;
            self.set_status_message(t!("toggle.mouse_hover_disabled").to_string());
        }
    }

    /// Check if mouse hover is enabled
    pub fn is_mouse_hover_enabled(&self) -> bool {
        self.config.editor.mouse_hover_enabled
    }

    /// Set GPM active flag (enables software mouse cursor rendering)
    ///
    /// When GPM is used for mouse input on Linux consoles, we need to draw
    /// our own mouse cursor because GPM can't draw on the alternate screen
    /// buffer used by TUI applications.
    pub fn set_gpm_active(&mut self, active: bool) {
        self.gpm_active = active;
    }

    /// Toggle inlay hints visibility
    pub fn toggle_inlay_hints(&mut self) {
        self.config.editor.enable_inlay_hints = !self.config.editor.enable_inlay_hints;

        if self.config.editor.enable_inlay_hints {
            // Re-request inlay hints for the active buffer
            self.request_inlay_hints_for_active_buffer();
            self.set_status_message(t!("toggle.inlay_hints_enabled").to_string());
        } else {
            // Clear inlay hints from all buffers
            for state in self.buffers.values_mut() {
                state.virtual_texts.clear(&mut state.marker_list);
            }
            self.set_status_message(t!("toggle.inlay_hints_disabled").to_string());
        }
    }

    /// Dump the current configuration to the user's config file
    pub fn dump_config(&mut self) {
        // Create the config directory if it doesn't exist
        if let Err(e) = std::fs::create_dir_all(&self.dir_context.config_dir) {
            self.set_status_message(
                t!("error.config_dir_failed", error = e.to_string()).to_string(),
            );
            return;
        }

        let config_path = self.dir_context.config_path();
        let resolver = ConfigResolver::new(self.dir_context.clone(), self.working_dir.clone());

        // Save the config to user layer
        match resolver.save_to_layer(&self.config, ConfigLayer::User) {
            Ok(()) => {
                // Open the saved config file in a new buffer
                match self.open_file(&config_path) {
                    Ok(_buffer_id) => {
                        self.set_status_message(
                            t!("config.saved", path = config_path.display().to_string())
                                .to_string(),
                        );
                    }
                    Err(e) => {
                        self.set_status_message(
                            t!("config.saved_failed_open", error = e.to_string()).to_string(),
                        );
                    }
                }
            }
            Err(e) => {
                self.set_status_message(
                    t!("error.config_save_failed", error = e.to_string()).to_string(),
                );
            }
        }
    }

    /// Save the current configuration to file (without opening it)
    ///
    /// Returns Ok(()) on success, or an error message on failure
    pub fn save_config(&self) -> Result<(), String> {
        // Create the config directory if it doesn't exist
        std::fs::create_dir_all(&self.dir_context.config_dir)
            .map_err(|e| format!("Failed to create config directory: {}", e))?;

        let resolver = ConfigResolver::new(self.dir_context.clone(), self.working_dir.clone());
        resolver
            .save_to_layer(&self.config, ConfigLayer::User)
            .map_err(|e| format!("Failed to save config: {}", e))
    }

    /// Reload configuration from the config file
    ///
    /// This reloads the config from disk, applies runtime changes (theme, keybindings),
    /// and emits a config_changed event so plugins can update their state accordingly.
    /// Uses the layered config system to properly merge with defaults.
    pub fn reload_config(&mut self) {
        let old_theme = self.config.theme.clone();
        self.config = Config::load_with_layers(&self.dir_context, &self.working_dir);

        // Apply theme change if needed
        if old_theme != self.config.theme {
            self.theme = crate::view::theme::Theme::from_name(&self.config.theme);
            tracing::info!("Theme changed to '{}'", self.config.theme.0);
        }

        // Always reload keybindings (complex types don't implement PartialEq)
        self.keybindings = KeybindingResolver::new(&self.config);

        // Update LSP configs
        if let Some(ref mut lsp) = self.lsp {
            for (language, lsp_config) in &self.config.lsp {
                lsp.set_language_config(language.clone(), lsp_config.clone());
            }
        }

        // Emit event so plugins know config changed
        let config_path = Config::find_config_path(&self.working_dir);
        self.emit_event(
            "config_changed",
            serde_json::json!({
                "path": config_path.map(|p| p.to_string_lossy().into_owned()),
            }),
        );
    }
}