#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
#[doc = "Register block"]
pub struct RegisterBlock {
conf: CONF,
load: LOAD,
load_hi: LOAD_HI,
load_lo: LOAD_LO,
step: STEP,
trgt: [TRGT; 3],
target_conf: [TARGET_CONF; 3],
unit_op: [UNIT_OP; 1],
unit_value: [UNIT_VALUE; 1],
int_ena: INT_ENA,
int_raw: INT_RAW,
int_clr: INT_CLR,
_reserved12: [u8; 0xac],
date: DATE,
}
impl RegisterBlock {
#[doc = "0x00 - Configure system timer clock"]
#[inline(always)]
pub const fn conf(&self) -> &CONF {
&self.conf
}
#[doc = "0x04 - Load value to system timer"]
#[inline(always)]
pub const fn load(&self) -> &LOAD {
&self.load
}
#[doc = "0x08 - High 32 bits to be loaded to system timer"]
#[inline(always)]
pub const fn load_hi(&self) -> &LOAD_HI {
&self.load_hi
}
#[doc = "0x0c - Low 32 bits to be loaded to system timer"]
#[inline(always)]
pub const fn load_lo(&self) -> &LOAD_LO {
&self.load_lo
}
#[doc = "0x10 - System timer accumulation step"]
#[inline(always)]
pub const fn step(&self) -> &STEP {
&self.step
}
#[doc = "0x14..0x2c - Cluster TRGT%s, containing TARGET?_HI, TARGET?_LO"]
#[inline(always)]
pub const fn trgt(&self, n: usize) -> &TRGT {
&self.trgt[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x14..0x2c - Cluster TRGT%s, containing TARGET?_HI, TARGET?_LO"]
#[inline(always)]
pub fn trgt_iter(&self) -> impl Iterator<Item = &TRGT> {
self.trgt.iter()
}
#[doc = "0x2c..0x38 - Configure work mode for system timer target %s"]
#[inline(always)]
pub const fn target_conf(&self, n: usize) -> &TARGET_CONF {
&self.target_conf[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x2c..0x38 - Configure work mode for system timer target %s"]
#[inline(always)]
pub fn target_conf_iter(&self) -> impl Iterator<Item = &TARGET_CONF> {
self.target_conf.iter()
}
#[doc = "0x2c - Configure work mode for system timer target 0"]
#[inline(always)]
pub const fn target0_conf(&self) -> &TARGET_CONF {
self.target_conf(0)
}
#[doc = "0x30 - Configure work mode for system timer target 1"]
#[inline(always)]
pub const fn target1_conf(&self) -> &TARGET_CONF {
self.target_conf(1)
}
#[doc = "0x34 - Configure work mode for system timer target 2"]
#[inline(always)]
pub const fn target2_conf(&self) -> &TARGET_CONF {
self.target_conf(2)
}
#[doc = "0x38 - Read out system timer value"]
#[inline(always)]
pub const fn unit_op(&self, n: usize) -> &UNIT_OP {
&self.unit_op[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x38 - Read out system timer value"]
#[inline(always)]
pub fn unit_op_iter(&self) -> impl Iterator<Item = &UNIT_OP> {
self.unit_op.iter()
}
#[doc = "0x38 - Read out system timer value"]
#[inline(always)]
pub const fn unit0_op(&self) -> &UNIT_OP {
self.unit_op(0)
}
#[doc = "0x3c..0x44 - Cluster UNIT%s_VALUE, containing UNIT?_VALUE_HI, UNIT?_VALUE_LO"]
#[inline(always)]
pub const fn unit_value(&self, n: usize) -> &UNIT_VALUE {
&self.unit_value[n]
}
#[doc = "Iterator for array of:"]
#[doc = "0x3c..0x44 - Cluster UNIT%s_VALUE, containing UNIT?_VALUE_HI, UNIT?_VALUE_LO"]
#[inline(always)]
pub fn unit_value_iter(&self) -> impl Iterator<Item = &UNIT_VALUE> {
self.unit_value.iter()
}
#[doc = "0x3c..0x44 - Cluster UNIT0_VALUE, containing UNIT?_VALUE_HI, UNIT?_VALUE_LO"]
#[inline(always)]
pub const fn unit0_value(&self) -> &UNIT_VALUE {
self.unit_value(0)
}
#[doc = "0x44 - System timer interrupt enable"]
#[inline(always)]
pub const fn int_ena(&self) -> &INT_ENA {
&self.int_ena
}
#[doc = "0x48 - System timer interrupt raw"]
#[inline(always)]
pub const fn int_raw(&self) -> &INT_RAW {
&self.int_raw
}
#[doc = "0x4c - System timer interrupt clear"]
#[inline(always)]
pub const fn int_clr(&self) -> &INT_CLR {
&self.int_clr
}
#[doc = "0xfc - Version control register"]
#[inline(always)]
pub const fn date(&self) -> &DATE {
&self.date
}
}
#[doc = "CONF (rw) register accessor: Configure system timer clock\n\nYou can [`read`](crate::Reg::read) this register and get [`conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@conf`] module"]
pub type CONF = crate::Reg<conf::CONF_SPEC>;
#[doc = "Configure system timer clock"]
pub mod conf;
#[doc = "LOAD (w) register accessor: Load value to system timer\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`load::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@load`] module"]
pub type LOAD = crate::Reg<load::LOAD_SPEC>;
#[doc = "Load value to system timer"]
pub mod load;
#[doc = "LOAD_HI (rw) register accessor: High 32 bits to be loaded to system timer\n\nYou can [`read`](crate::Reg::read) this register and get [`load_hi::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`load_hi::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@load_hi`] module"]
pub type LOAD_HI = crate::Reg<load_hi::LOAD_HI_SPEC>;
#[doc = "High 32 bits to be loaded to system timer"]
pub mod load_hi;
#[doc = "LOAD_LO (rw) register accessor: Low 32 bits to be loaded to system timer\n\nYou can [`read`](crate::Reg::read) this register and get [`load_lo::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`load_lo::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@load_lo`] module"]
pub type LOAD_LO = crate::Reg<load_lo::LOAD_LO_SPEC>;
#[doc = "Low 32 bits to be loaded to system timer"]
pub mod load_lo;
#[doc = "STEP (rw) register accessor: System timer accumulation step\n\nYou can [`read`](crate::Reg::read) this register and get [`step::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`step::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@step`] module"]
pub type STEP = crate::Reg<step::STEP_SPEC>;
#[doc = "System timer accumulation step"]
pub mod step;
#[doc = "Cluster TRGT%s, containing TARGET?_HI, TARGET?_LO"]
pub use self::trgt::TRGT;
#[doc = r"Cluster"]
#[doc = "Cluster TRGT%s, containing TARGET?_HI, TARGET?_LO"]
pub mod trgt;
#[doc = "TARGET_CONF (rw) register accessor: Configure work mode for system timer target %s\n\nYou can [`read`](crate::Reg::read) this register and get [`target_conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`target_conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@target_conf`] module"]
pub type TARGET_CONF = crate::Reg<target_conf::TARGET_CONF_SPEC>;
#[doc = "Configure work mode for system timer target %s"]
pub mod target_conf;
#[doc = "UNIT_OP (rw) register accessor: Read out system timer value\n\nYou can [`read`](crate::Reg::read) this register and get [`unit_op::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`unit_op::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@unit_op`] module"]
pub type UNIT_OP = crate::Reg<unit_op::UNIT_OP_SPEC>;
#[doc = "Read out system timer value"]
pub mod unit_op;
#[doc = "Cluster UNIT%s_VALUE, containing UNIT?_VALUE_HI, UNIT?_VALUE_LO"]
pub use self::unit_value::UNIT_VALUE;
#[doc = r"Cluster"]
#[doc = "Cluster UNIT%s_VALUE, containing UNIT?_VALUE_HI, UNIT?_VALUE_LO"]
pub mod unit_value;
#[doc = "INT_ENA (rw) register accessor: System timer interrupt enable\n\nYou can [`read`](crate::Reg::read) this register and get [`int_ena::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_ena::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_ena`] module"]
pub type INT_ENA = crate::Reg<int_ena::INT_ENA_SPEC>;
#[doc = "System timer interrupt enable"]
pub mod int_ena;
#[doc = "INT_RAW (r) register accessor: System timer interrupt raw\n\nYou can [`read`](crate::Reg::read) this register and get [`int_raw::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_raw`] module"]
pub type INT_RAW = crate::Reg<int_raw::INT_RAW_SPEC>;
#[doc = "System timer interrupt raw"]
pub mod int_raw;
#[doc = "INT_CLR (w) register accessor: System timer interrupt clear\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_clr`] module"]
pub type INT_CLR = crate::Reg<int_clr::INT_CLR_SPEC>;
#[doc = "System timer interrupt clear"]
pub mod int_clr;
pub use crate::aes::{date, DATE};