esp32s2 0.31.0

Peripheral access crate for the ESP32-S2
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177

#[repr(C)]
#[cfg_attr(feature = "impl-register-debug", derive(Debug))]
#[doc = "Register block"]
pub struct RegisterBlock {
    int_raw: INT_RAW,
    int_st: INT_ST,
    int_ena: INT_ENA,
    int_clr: INT_CLR,
    out_link: OUT_LINK,
    in_link: IN_LINK,
    out_eof_des_addr: OUT_EOF_DES_ADDR,
    in_eof_des_addr: IN_EOF_DES_ADDR,
    out_eof_bfr_des_addr: OUT_EOF_BFR_DES_ADDR,
    inlink_dscr: INLINK_DSCR,
    inlink_dscr_bf0: INLINK_DSCR_BF0,
    _reserved11: [u8; 0x04],
    outlink_dscr: OUTLINK_DSCR,
    outlink_dscr_bf0: OUTLINK_DSCR_BF0,
    _reserved13: [u8; 0x04],
    conf: CONF,
    in_st: IN_ST,
    out_st: OUT_ST,
    _reserved16: [u8; 0xb4],
    date: DATE,
}
impl RegisterBlock {
    #[doc = "0x00 - Raw interrupt status"]
    #[inline(always)]
    pub const fn int_raw(&self) -> &INT_RAW {
        &self.int_raw
    }
    #[doc = "0x04 - Masked interrupt status"]
    #[inline(always)]
    pub const fn int_st(&self) -> &INT_ST {
        &self.int_st
    }
    #[doc = "0x08 - Interrupt enable bits"]
    #[inline(always)]
    pub const fn int_ena(&self) -> &INT_ENA {
        &self.int_ena
    }
    #[doc = "0x0c - Interrupt clear bits"]
    #[inline(always)]
    pub const fn int_clr(&self) -> &INT_CLR {
        &self.int_clr
    }
    #[doc = "0x10 - Link descriptor address and control"]
    #[inline(always)]
    pub const fn out_link(&self) -> &OUT_LINK {
        &self.out_link
    }
    #[doc = "0x14 - Link descriptor address and control"]
    #[inline(always)]
    pub const fn in_link(&self) -> &IN_LINK {
        &self.in_link
    }
    #[doc = "0x18 - Transmit descriptor address when EOF occurs"]
    #[inline(always)]
    pub const fn out_eof_des_addr(&self) -> &OUT_EOF_DES_ADDR {
        &self.out_eof_des_addr
    }
    #[doc = "0x1c - Receive descriptor address when EOF occurs"]
    #[inline(always)]
    pub const fn in_eof_des_addr(&self) -> &IN_EOF_DES_ADDR {
        &self.in_eof_des_addr
    }
    #[doc = "0x20 - Transmit descriptor address before the last transmit descriptor"]
    #[inline(always)]
    pub const fn out_eof_bfr_des_addr(&self) -> &OUT_EOF_BFR_DES_ADDR {
        &self.out_eof_bfr_des_addr
    }
    #[doc = "0x24 - Address of current receive descriptor"]
    #[inline(always)]
    pub const fn inlink_dscr(&self) -> &INLINK_DSCR {
        &self.inlink_dscr
    }
    #[doc = "0x28 - Address of last receive descriptor"]
    #[inline(always)]
    pub const fn inlink_dscr_bf0(&self) -> &INLINK_DSCR_BF0 {
        &self.inlink_dscr_bf0
    }
    #[doc = "0x30 - Address of current transmit descriptor"]
    #[inline(always)]
    pub const fn outlink_dscr(&self) -> &OUTLINK_DSCR {
        &self.outlink_dscr
    }
    #[doc = "0x34 - Address of last transmit descriptor"]
    #[inline(always)]
    pub const fn outlink_dscr_bf0(&self) -> &OUTLINK_DSCR_BF0 {
        &self.outlink_dscr_bf0
    }
    #[doc = "0x3c - Copy DMA configuration register"]
    #[inline(always)]
    pub const fn conf(&self) -> &CONF {
        &self.conf
    }
    #[doc = "0x40 - Status register of receiving data"]
    #[inline(always)]
    pub const fn in_st(&self) -> &IN_ST {
        &self.in_st
    }
    #[doc = "0x44 - Status register of transmitting data"]
    #[inline(always)]
    pub const fn out_st(&self) -> &OUT_ST {
        &self.out_st
    }
    #[doc = "0xfc - Copy DMA version control register"]
    #[inline(always)]
    pub const fn date(&self) -> &DATE {
        &self.date
    }
}
#[doc = "INT_RAW (r) register accessor: Raw interrupt status\n\nYou can [`read`](crate::Reg::read) this register and get [`int_raw::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_raw`] module"]
pub type INT_RAW = crate::Reg<int_raw::INT_RAW_SPEC>;
#[doc = "Raw interrupt status"]
pub mod int_raw;
#[doc = "INT_ST (r) register accessor: Masked interrupt status\n\nYou can [`read`](crate::Reg::read) this register and get [`int_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_st`] module"]
pub type INT_ST = crate::Reg<int_st::INT_ST_SPEC>;
#[doc = "Masked interrupt status"]
pub mod int_st;
#[doc = "INT_ENA (rw) register accessor: Interrupt enable bits\n\nYou can [`read`](crate::Reg::read) this register and get [`int_ena::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_ena::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_ena`] module"]
pub type INT_ENA = crate::Reg<int_ena::INT_ENA_SPEC>;
#[doc = "Interrupt enable bits"]
pub mod int_ena;
#[doc = "INT_CLR (w) register accessor: Interrupt clear bits\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_clr::W`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@int_clr`] module"]
pub type INT_CLR = crate::Reg<int_clr::INT_CLR_SPEC>;
#[doc = "Interrupt clear bits"]
pub mod int_clr;
#[doc = "OUT_LINK (rw) register accessor: Link descriptor address and control\n\nYou can [`read`](crate::Reg::read) this register and get [`out_link::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`out_link::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out_link`] module"]
pub type OUT_LINK = crate::Reg<out_link::OUT_LINK_SPEC>;
#[doc = "Link descriptor address and control"]
pub mod out_link;
#[doc = "IN_LINK (rw) register accessor: Link descriptor address and control\n\nYou can [`read`](crate::Reg::read) this register and get [`in_link::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`in_link::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@in_link`] module"]
pub type IN_LINK = crate::Reg<in_link::IN_LINK_SPEC>;
#[doc = "Link descriptor address and control"]
pub mod in_link;
#[doc = "CONF (rw) register accessor: Copy DMA configuration register\n\nYou can [`read`](crate::Reg::read) this register and get [`conf::R`]. You can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`conf::W`]. You can also [`modify`](crate::Reg::modify) this register. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@conf`] module"]
pub type CONF = crate::Reg<conf::CONF_SPEC>;
#[doc = "Copy DMA configuration register"]
pub mod conf;
#[doc = "OUT_EOF_DES_ADDR (r) register accessor: Transmit descriptor address when EOF occurs\n\nYou can [`read`](crate::Reg::read) this register and get [`out_eof_des_addr::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out_eof_des_addr`] module"]
pub type OUT_EOF_DES_ADDR = crate::Reg<out_eof_des_addr::OUT_EOF_DES_ADDR_SPEC>;
#[doc = "Transmit descriptor address when EOF occurs"]
pub mod out_eof_des_addr;
#[doc = "IN_EOF_DES_ADDR (r) register accessor: Receive descriptor address when EOF occurs\n\nYou can [`read`](crate::Reg::read) this register and get [`in_eof_des_addr::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@in_eof_des_addr`] module"]
pub type IN_EOF_DES_ADDR = crate::Reg<in_eof_des_addr::IN_EOF_DES_ADDR_SPEC>;
#[doc = "Receive descriptor address when EOF occurs"]
pub mod in_eof_des_addr;
#[doc = "OUT_EOF_BFR_DES_ADDR (r) register accessor: Transmit descriptor address before the last transmit descriptor\n\nYou can [`read`](crate::Reg::read) this register and get [`out_eof_bfr_des_addr::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out_eof_bfr_des_addr`] module"]
pub type OUT_EOF_BFR_DES_ADDR = crate::Reg<out_eof_bfr_des_addr::OUT_EOF_BFR_DES_ADDR_SPEC>;
#[doc = "Transmit descriptor address before the last transmit descriptor"]
pub mod out_eof_bfr_des_addr;
#[doc = "INLINK_DSCR (r) register accessor: Address of current receive descriptor\n\nYou can [`read`](crate::Reg::read) this register and get [`inlink_dscr::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@inlink_dscr`] module"]
pub type INLINK_DSCR = crate::Reg<inlink_dscr::INLINK_DSCR_SPEC>;
#[doc = "Address of current receive descriptor"]
pub mod inlink_dscr;
#[doc = "INLINK_DSCR_BF0 (r) register accessor: Address of last receive descriptor\n\nYou can [`read`](crate::Reg::read) this register and get [`inlink_dscr_bf0::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@inlink_dscr_bf0`] module"]
pub type INLINK_DSCR_BF0 = crate::Reg<inlink_dscr_bf0::INLINK_DSCR_BF0_SPEC>;
#[doc = "Address of last receive descriptor"]
pub mod inlink_dscr_bf0;
#[doc = "OUTLINK_DSCR (r) register accessor: Address of current transmit descriptor\n\nYou can [`read`](crate::Reg::read) this register and get [`outlink_dscr::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@outlink_dscr`] module"]
pub type OUTLINK_DSCR = crate::Reg<outlink_dscr::OUTLINK_DSCR_SPEC>;
#[doc = "Address of current transmit descriptor"]
pub mod outlink_dscr;
#[doc = "OUTLINK_DSCR_BF0 (r) register accessor: Address of last transmit descriptor\n\nYou can [`read`](crate::Reg::read) this register and get [`outlink_dscr_bf0::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@outlink_dscr_bf0`] module"]
pub type OUTLINK_DSCR_BF0 = crate::Reg<outlink_dscr_bf0::OUTLINK_DSCR_BF0_SPEC>;
#[doc = "Address of last transmit descriptor"]
pub mod outlink_dscr_bf0;
#[doc = "IN_ST (r) register accessor: Status register of receiving data\n\nYou can [`read`](crate::Reg::read) this register and get [`in_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@in_st`] module"]
pub type IN_ST = crate::Reg<in_st::IN_ST_SPEC>;
#[doc = "Status register of receiving data"]
pub mod in_st;
#[doc = "OUT_ST (r) register accessor: Status register of transmitting data\n\nYou can [`read`](crate::Reg::read) this register and get [`out_st::R`]. See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [`mod@out_st`] module"]
pub type OUT_ST = crate::Reg<out_st::OUT_ST_SPEC>;
#[doc = "Status register of transmitting data"]
pub mod out_st;
pub use crate::aes::{date, DATE};