esp32h2 0.16.0

Peripheral access crate for the ESP32-H2
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172

#[doc = "Register `INT_CLR` writer"]
pub type W = crate::W<INT_CLR_SPEC>;
#[doc = "Field `CH_TX_END(0-1)` writer - Set this bit to clear theCH%s_TX_END_INT interrupt."]
pub type CH_TX_END_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `CH_RX_END(2-3)` writer - Set this bit to clear theCH2_RX_END_INT interrupt."]
pub type CH_RX_END_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `CH_TX_ERR(0-1)` writer - Set this bit to clear theCH4_ERR_INT interrupt."]
pub type CH_TX_ERR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `CH_RX_ERR(2-3)` writer - Set this bit to clear theCH6_ERR_INT interrupt."]
pub type CH_RX_ERR_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `CH_TX_THR_EVENT(0-1)` writer - Set this bit to clear theCH%s_TX_THR_EVENT_INT interrupt."]
pub type CH_TX_THR_EVENT_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `CH_RX_THR_EVENT(2-3)` writer - Set this bit to clear theCH2_RX_THR_EVENT_INT interrupt."]
pub type CH_RX_THR_EVENT_W<'a, REG> = crate::BitWriter<'a, REG>;
#[doc = "Field `CH_TX_LOOP(0-1)` writer - Set this bit to clear theCH%s_TX_LOOP_INT interrupt."]
pub type CH_TX_LOOP_W<'a, REG> = crate::BitWriter<'a, REG>;
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for crate::generic::Reg<INT_CLR_SPEC> {
    fn fmt(&self, f: &mut core::fmt::Formatter<'_>) -> core::fmt::Result {
        write!(f, "(not readable)")
    }
}
impl W {
    #[doc = "Set this bit to clear theCH(0-1)_TX_END_INT interrupt."]
    #[doc = ""]
    #[doc = "<div class=\"warning\">`n` is number of field in register. `n == 0` corresponds to `CH0_TX_END` field.</div>"]
    #[inline(always)]
    pub fn ch_tx_end(&mut self, n: u8) -> CH_TX_END_W<INT_CLR_SPEC> {
        #[allow(clippy::no_effect)]
        [(); 2][n as usize];
        CH_TX_END_W::new(self, n)
    }
    #[doc = "Bit 0 - Set this bit to clear theCH0_TX_END_INT interrupt."]
    #[inline(always)]
    pub fn ch0_tx_end(&mut self) -> CH_TX_END_W<INT_CLR_SPEC> {
        CH_TX_END_W::new(self, 0)
    }
    #[doc = "Bit 1 - Set this bit to clear theCH1_TX_END_INT interrupt."]
    #[inline(always)]
    pub fn ch1_tx_end(&mut self) -> CH_TX_END_W<INT_CLR_SPEC> {
        CH_TX_END_W::new(self, 1)
    }
    #[doc = "Set this bit to clear theCH2_RX_END_INT interrupt."]
    #[doc = ""]
    #[doc = "<div class=\"warning\">`n` is number of field in register. `n == 0` corresponds to `CH2_RX_END` field.</div>"]
    #[inline(always)]
    pub fn ch_rx_end(&mut self, n: u8) -> CH_RX_END_W<INT_CLR_SPEC> {
        #[allow(clippy::no_effect)]
        [(); 2][n as usize];
        CH_RX_END_W::new(self, n + 2)
    }
    #[doc = "Bit 2 - Set this bit to clear theCH2_RX_END_INT interrupt."]
    #[inline(always)]
    pub fn ch2_rx_end(&mut self) -> CH_RX_END_W<INT_CLR_SPEC> {
        CH_RX_END_W::new(self, 2)
    }
    #[doc = "Bit 3 - Set this bit to clear theCH2_RX_END_INT interrupt."]
    #[inline(always)]
    pub fn ch3_rx_end(&mut self) -> CH_RX_END_W<INT_CLR_SPEC> {
        CH_RX_END_W::new(self, 3)
    }
    #[doc = "Set this bit to clear theCH4_ERR_INT interrupt."]
    #[doc = ""]
    #[doc = "<div class=\"warning\">`n` is number of field in register. `n == 0` corresponds to `CH0_TX_ERR` field.</div>"]
    #[inline(always)]
    pub fn ch_tx_err(&mut self, n: u8) -> CH_TX_ERR_W<INT_CLR_SPEC> {
        #[allow(clippy::no_effect)]
        [(); 2][n as usize];
        CH_TX_ERR_W::new(self, n + 4)
    }
    #[doc = "Bit 4 - Set this bit to clear theCH4_ERR_INT interrupt."]
    #[inline(always)]
    pub fn ch0_tx_err(&mut self) -> CH_TX_ERR_W<INT_CLR_SPEC> {
        CH_TX_ERR_W::new(self, 4)
    }
    #[doc = "Bit 5 - Set this bit to clear theCH4_ERR_INT interrupt."]
    #[inline(always)]
    pub fn ch1_tx_err(&mut self) -> CH_TX_ERR_W<INT_CLR_SPEC> {
        CH_TX_ERR_W::new(self, 5)
    }
    #[doc = "Set this bit to clear theCH6_ERR_INT interrupt."]
    #[doc = ""]
    #[doc = "<div class=\"warning\">`n` is number of field in register. `n == 0` corresponds to `CH2_RX_ERR` field.</div>"]
    #[inline(always)]
    pub fn ch_rx_err(&mut self, n: u8) -> CH_RX_ERR_W<INT_CLR_SPEC> {
        #[allow(clippy::no_effect)]
        [(); 2][n as usize];
        CH_RX_ERR_W::new(self, n + 6)
    }
    #[doc = "Bit 6 - Set this bit to clear theCH6_ERR_INT interrupt."]
    #[inline(always)]
    pub fn ch2_rx_err(&mut self) -> CH_RX_ERR_W<INT_CLR_SPEC> {
        CH_RX_ERR_W::new(self, 6)
    }
    #[doc = "Bit 7 - Set this bit to clear theCH6_ERR_INT interrupt."]
    #[inline(always)]
    pub fn ch3_rx_err(&mut self) -> CH_RX_ERR_W<INT_CLR_SPEC> {
        CH_RX_ERR_W::new(self, 7)
    }
    #[doc = "Set this bit to clear theCH(0-1)_TX_THR_EVENT_INT interrupt."]
    #[doc = ""]
    #[doc = "<div class=\"warning\">`n` is number of field in register. `n == 0` corresponds to `CH0_TX_THR_EVENT` field.</div>"]
    #[inline(always)]
    pub fn ch_tx_thr_event(&mut self, n: u8) -> CH_TX_THR_EVENT_W<INT_CLR_SPEC> {
        #[allow(clippy::no_effect)]
        [(); 2][n as usize];
        CH_TX_THR_EVENT_W::new(self, n + 8)
    }
    #[doc = "Bit 8 - Set this bit to clear theCH0_TX_THR_EVENT_INT interrupt."]
    #[inline(always)]
    pub fn ch0_tx_thr_event(&mut self) -> CH_TX_THR_EVENT_W<INT_CLR_SPEC> {
        CH_TX_THR_EVENT_W::new(self, 8)
    }
    #[doc = "Bit 9 - Set this bit to clear theCH1_TX_THR_EVENT_INT interrupt."]
    #[inline(always)]
    pub fn ch1_tx_thr_event(&mut self) -> CH_TX_THR_EVENT_W<INT_CLR_SPEC> {
        CH_TX_THR_EVENT_W::new(self, 9)
    }
    #[doc = "Set this bit to clear theCH2_RX_THR_EVENT_INT interrupt."]
    #[doc = ""]
    #[doc = "<div class=\"warning\">`n` is number of field in register. `n == 0` corresponds to `CH2_RX_THR_EVENT` field.</div>"]
    #[inline(always)]
    pub fn ch_rx_thr_event(&mut self, n: u8) -> CH_RX_THR_EVENT_W<INT_CLR_SPEC> {
        #[allow(clippy::no_effect)]
        [(); 2][n as usize];
        CH_RX_THR_EVENT_W::new(self, n + 10)
    }
    #[doc = "Bit 10 - Set this bit to clear theCH2_RX_THR_EVENT_INT interrupt."]
    #[inline(always)]
    pub fn ch2_rx_thr_event(&mut self) -> CH_RX_THR_EVENT_W<INT_CLR_SPEC> {
        CH_RX_THR_EVENT_W::new(self, 10)
    }
    #[doc = "Bit 11 - Set this bit to clear theCH2_RX_THR_EVENT_INT interrupt."]
    #[inline(always)]
    pub fn ch3_rx_thr_event(&mut self) -> CH_RX_THR_EVENT_W<INT_CLR_SPEC> {
        CH_RX_THR_EVENT_W::new(self, 11)
    }
    #[doc = "Set this bit to clear theCH(0-1)_TX_LOOP_INT interrupt."]
    #[doc = ""]
    #[doc = "<div class=\"warning\">`n` is number of field in register. `n == 0` corresponds to `CH0_TX_LOOP` field.</div>"]
    #[inline(always)]
    pub fn ch_tx_loop(&mut self, n: u8) -> CH_TX_LOOP_W<INT_CLR_SPEC> {
        #[allow(clippy::no_effect)]
        [(); 2][n as usize];
        CH_TX_LOOP_W::new(self, n + 12)
    }
    #[doc = "Bit 12 - Set this bit to clear theCH0_TX_LOOP_INT interrupt."]
    #[inline(always)]
    pub fn ch0_tx_loop(&mut self) -> CH_TX_LOOP_W<INT_CLR_SPEC> {
        CH_TX_LOOP_W::new(self, 12)
    }
    #[doc = "Bit 13 - Set this bit to clear theCH1_TX_LOOP_INT interrupt."]
    #[inline(always)]
    pub fn ch1_tx_loop(&mut self) -> CH_TX_LOOP_W<INT_CLR_SPEC> {
        CH_TX_LOOP_W::new(self, 13)
    }
}
#[doc = "Interrupt clear bits\n\nYou can [`reset`](crate::Reg::reset), [`write`](crate::Reg::write), [`write_with_zero`](crate::Reg::write_with_zero) this register using [`int_clr::W`](W). See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct INT_CLR_SPEC;
impl crate::RegisterSpec for INT_CLR_SPEC {
    type Ux = u32;
}
#[doc = "`write(|w| ..)` method takes [`int_clr::W`](W) writer structure"]
impl crate::Writable for INT_CLR_SPEC {
    type Safety = crate::Unsafe;
    const ZERO_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
    const ONE_TO_MODIFY_FIELDS_BITMAP: u32 = 0;
}
#[doc = "`reset()` method sets INT_CLR to value 0"]
impl crate::Resettable for INT_CLR_SPEC {
    const RESET_VALUE: u32 = 0;
}