esp32c6 0.23.0

Peripheral access crate for the ESP32-C6
Documentation 
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81

#[doc = "Register `AXI_ERR_ADDR` reader"]
pub type R = crate::R<AXI_ERR_ADDR_SPEC>;
#[doc = "Field `AXI_ERR_ADDR` reader - This bits show the first AXI write/read invalid error or AXI write flash error address. It is cleared by when SPI_MEM_AXI_WADDR_ERR_INT_CLR, SPI_MEM_AXI_WR_FLASH_ERR_IN_CLR or SPI_MEM_AXI_RADDR_ERR_IN_CLR bit is set."]
pub type AXI_ERR_ADDR_R = crate::FieldReader<u32>;
#[doc = "Field `ALL_FIFO_EMPTY` reader - The empty status of all AFIFO and SYNC_FIFO in MSPI module. 1: All AXI transfers and SPI0 transfers are done. 0: Others."]
pub type ALL_FIFO_EMPTY_R = crate::BitReader;
#[doc = "Field `SPI_RDATA_AFIFO_REMPTY` reader - 1: RDATA_AFIFO is empty. 0: At least one AXI read transfer is pending."]
pub type SPI_RDATA_AFIFO_REMPTY_R = crate::BitReader;
#[doc = "Field `SPI_RADDR_AFIFO_REMPTY` reader - 1: AXI_RADDR_CTL_AFIFO is empty. 0: At least one AXI read transfer is pending."]
pub type SPI_RADDR_AFIFO_REMPTY_R = crate::BitReader;
#[doc = "Field `SPI_WDATA_AFIFO_REMPTY` reader - 1: WDATA_AFIFO is empty. 0: At least one AXI write transfer is pending."]
pub type SPI_WDATA_AFIFO_REMPTY_R = crate::BitReader;
#[doc = "Field `SPI_WBLEN_AFIFO_REMPTY` reader - 1: WBLEN_AFIFO is empty. 0: At least one AXI write transfer is pending."]
pub type SPI_WBLEN_AFIFO_REMPTY_R = crate::BitReader;
#[doc = "Field `SPI_ALL_AXI_TRANS_AFIFO_EMPTY` reader - This bit is set when WADDR_AFIFO, WBLEN_AFIFO, WDATA_AFIFO, AXI_RADDR_CTL_AFIFO and RDATA_AFIFO are empty and spi0_mst_st is IDLE."]
pub type SPI_ALL_AXI_TRANS_AFIFO_EMPTY_R = crate::BitReader;
impl R {
    #[doc = "Bits 0:25 - This bits show the first AXI write/read invalid error or AXI write flash error address. It is cleared by when SPI_MEM_AXI_WADDR_ERR_INT_CLR, SPI_MEM_AXI_WR_FLASH_ERR_IN_CLR or SPI_MEM_AXI_RADDR_ERR_IN_CLR bit is set."]
    #[inline(always)]
    pub fn axi_err_addr(&self) -> AXI_ERR_ADDR_R {
        AXI_ERR_ADDR_R::new(self.bits & 0x03ff_ffff)
    }
    #[doc = "Bit 26 - The empty status of all AFIFO and SYNC_FIFO in MSPI module. 1: All AXI transfers and SPI0 transfers are done. 0: Others."]
    #[inline(always)]
    pub fn all_fifo_empty(&self) -> ALL_FIFO_EMPTY_R {
        ALL_FIFO_EMPTY_R::new(((self.bits >> 26) & 1) != 0)
    }
    #[doc = "Bit 27 - 1: RDATA_AFIFO is empty. 0: At least one AXI read transfer is pending."]
    #[inline(always)]
    pub fn spi_rdata_afifo_rempty(&self) -> SPI_RDATA_AFIFO_REMPTY_R {
        SPI_RDATA_AFIFO_REMPTY_R::new(((self.bits >> 27) & 1) != 0)
    }
    #[doc = "Bit 28 - 1: AXI_RADDR_CTL_AFIFO is empty. 0: At least one AXI read transfer is pending."]
    #[inline(always)]
    pub fn spi_raddr_afifo_rempty(&self) -> SPI_RADDR_AFIFO_REMPTY_R {
        SPI_RADDR_AFIFO_REMPTY_R::new(((self.bits >> 28) & 1) != 0)
    }
    #[doc = "Bit 29 - 1: WDATA_AFIFO is empty. 0: At least one AXI write transfer is pending."]
    #[inline(always)]
    pub fn spi_wdata_afifo_rempty(&self) -> SPI_WDATA_AFIFO_REMPTY_R {
        SPI_WDATA_AFIFO_REMPTY_R::new(((self.bits >> 29) & 1) != 0)
    }
    #[doc = "Bit 30 - 1: WBLEN_AFIFO is empty. 0: At least one AXI write transfer is pending."]
    #[inline(always)]
    pub fn spi_wblen_afifo_rempty(&self) -> SPI_WBLEN_AFIFO_REMPTY_R {
        SPI_WBLEN_AFIFO_REMPTY_R::new(((self.bits >> 30) & 1) != 0)
    }
    #[doc = "Bit 31 - This bit is set when WADDR_AFIFO, WBLEN_AFIFO, WDATA_AFIFO, AXI_RADDR_CTL_AFIFO and RDATA_AFIFO are empty and spi0_mst_st is IDLE."]
    #[inline(always)]
    pub fn spi_all_axi_trans_afifo_empty(&self) -> SPI_ALL_AXI_TRANS_AFIFO_EMPTY_R {
        SPI_ALL_AXI_TRANS_AFIFO_EMPTY_R::new(((self.bits >> 31) & 1) != 0)
    }
}
#[cfg(feature = "impl-register-debug")]
impl core::fmt::Debug for R {
    fn fmt(&self, f: &mut core::fmt::Formatter) -> core::fmt::Result {
        f.debug_struct("AXI_ERR_ADDR")
            .field("axi_err_addr", &self.axi_err_addr())
            .field("all_fifo_empty", &self.all_fifo_empty())
            .field("spi_rdata_afifo_rempty", &self.spi_rdata_afifo_rempty())
            .field("spi_raddr_afifo_rempty", &self.spi_raddr_afifo_rempty())
            .field("spi_wdata_afifo_rempty", &self.spi_wdata_afifo_rempty())
            .field("spi_wblen_afifo_rempty", &self.spi_wblen_afifo_rempty())
            .field(
                "spi_all_axi_trans_afifo_empty",
                &self.spi_all_axi_trans_afifo_empty(),
            )
            .finish()
    }
}
#[doc = "SPI0 AXI request error address.\n\nYou can [`read`](crate::Reg::read) this register and get [`axi_err_addr::R`](R). See [API](https://docs.rs/svd2rust/#read--modify--write-api)."]
pub struct AXI_ERR_ADDR_SPEC;
impl crate::RegisterSpec for AXI_ERR_ADDR_SPEC {
    type Ux = u32;
}
#[doc = "`read()` method returns [`axi_err_addr::R`](R) reader structure"]
impl crate::Readable for AXI_ERR_ADDR_SPEC {}
#[doc = "`reset()` method sets AXI_ERR_ADDR to value 0xfc00_0000"]
impl crate::Resettable for AXI_ERR_ADDR_SPEC {
    const RESET_VALUE: u32 = 0xfc00_0000;
}