#[doc = "Register `SLAVE` reader"]
pub struct R(crate::R<SLAVE_SPEC>);
impl core::ops::Deref for R {
type Target = crate::R<SLAVE_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl From<crate::R<SLAVE_SPEC>> for R {
#[inline(always)]
fn from(reader: crate::R<SLAVE_SPEC>) -> Self {
R(reader)
}
}
#[doc = "Register `SLAVE` writer"]
pub struct W(crate::W<SLAVE_SPEC>);
impl core::ops::Deref for W {
type Target = crate::W<SLAVE_SPEC>;
#[inline(always)]
fn deref(&self) -> &Self::Target {
&self.0
}
}
impl core::ops::DerefMut for W {
#[inline(always)]
fn deref_mut(&mut self) -> &mut Self::Target {
&mut self.0
}
}
impl From<crate::W<SLAVE_SPEC>> for W {
#[inline(always)]
fn from(writer: crate::W<SLAVE_SPEC>) -> Self {
W(writer)
}
}
#[doc = "Field `SLV_RD_BUF_DONE` reader - The interrupt raw bit for the completion of read-buffer operation in the slave mode."]
pub type SLV_RD_BUF_DONE_R = crate::BitReader<bool>;
#[doc = "Field `SLV_RD_BUF_DONE` writer - The interrupt raw bit for the completion of read-buffer operation in the slave mode."]
pub type SLV_RD_BUF_DONE_W<'a, const O: u8> = crate::BitWriter<'a, u32, SLAVE_SPEC, bool, O>;
#[doc = "Field `SLV_WR_BUF_DONE` reader - The interrupt raw bit for the completion of write-buffer operation in the slave mode."]
pub type SLV_WR_BUF_DONE_R = crate::BitReader<bool>;
#[doc = "Field `SLV_WR_BUF_DONE` writer - The interrupt raw bit for the completion of write-buffer operation in the slave mode."]
pub type SLV_WR_BUF_DONE_W<'a, const O: u8> = crate::BitWriter<'a, u32, SLAVE_SPEC, bool, O>;
#[doc = "Field `SLV_RD_STA_DONE` reader - The interrupt raw bit for the completion of read-status operation in the slave mode."]
pub type SLV_RD_STA_DONE_R = crate::BitReader<bool>;
#[doc = "Field `SLV_RD_STA_DONE` writer - The interrupt raw bit for the completion of read-status operation in the slave mode."]
pub type SLV_RD_STA_DONE_W<'a, const O: u8> = crate::BitWriter<'a, u32, SLAVE_SPEC, bool, O>;
#[doc = "Field `SLV_WR_STA_DONE` reader - The interrupt raw bit for the completion of write-status operation in the slave mode."]
pub type SLV_WR_STA_DONE_R = crate::BitReader<bool>;
#[doc = "Field `SLV_WR_STA_DONE` writer - The interrupt raw bit for the completion of write-status operation in the slave mode."]
pub type SLV_WR_STA_DONE_W<'a, const O: u8> = crate::BitWriter<'a, u32, SLAVE_SPEC, bool, O>;
#[doc = "Field `TRANS_DONE` reader - The interrupt raw bit for the completion of any operation in both the master mode and the slave mode."]
pub type TRANS_DONE_R = crate::BitReader<bool>;
#[doc = "Field `TRANS_DONE` writer - The interrupt raw bit for the completion of any operation in both the master mode and the slave mode."]
pub type TRANS_DONE_W<'a, const O: u8> = crate::BitWriter<'a, u32, SLAVE_SPEC, bool, O>;
#[doc = "Field `INT_EN` reader - Interrupt enable bits for the below 5 sources"]
pub type INT_EN_R = crate::FieldReader<u8, u8>;
#[doc = "Field `INT_EN` writer - Interrupt enable bits for the below 5 sources"]
pub type INT_EN_W<'a, const O: u8> = crate::FieldWriter<'a, u32, SLAVE_SPEC, u8, u8, 5, O>;
#[doc = "Field `CS_I_MODE` reader - In the slave mode this bits used to synchronize the input spi cs signal and eliminate spi cs jitter."]
pub type CS_I_MODE_R = crate::FieldReader<u8, u8>;
#[doc = "Field `CS_I_MODE` writer - In the slave mode this bits used to synchronize the input spi cs signal and eliminate spi cs jitter."]
pub type CS_I_MODE_W<'a, const O: u8> = crate::FieldWriter<'a, u32, SLAVE_SPEC, u8, u8, 2, O>;
#[doc = "Field `SLV_LAST_COMMAND` reader - In the slave mode it is the value of command."]
pub type SLV_LAST_COMMAND_R = crate::FieldReader<u8, u8>;
#[doc = "Field `SLV_LAST_STATE` reader - In the slave mode it is the state of spi state machine."]
pub type SLV_LAST_STATE_R = crate::FieldReader<u8, u8>;
#[doc = "Field `TRANS_CNT` reader - The operations counter in both the master mode and the slave mode. 4: read-status"]
pub type TRANS_CNT_R = crate::FieldReader<u8, u8>;
#[doc = "Field `SLV_CMD_DEFINE` reader - 1: slave mode commands are defined in SPI_SLAVE3. 0: slave mode commands are fixed as: 1: write-status 2: write-buffer and 3: read-buffer."]
pub type SLV_CMD_DEFINE_R = crate::BitReader<bool>;
#[doc = "Field `SLV_CMD_DEFINE` writer - 1: slave mode commands are defined in SPI_SLAVE3. 0: slave mode commands are fixed as: 1: write-status 2: write-buffer and 3: read-buffer."]
pub type SLV_CMD_DEFINE_W<'a, const O: u8> = crate::BitWriter<'a, u32, SLAVE_SPEC, bool, O>;
#[doc = "Field `SLV_WR_RD_STA_EN` reader - write and read status enable in the slave mode"]
pub type SLV_WR_RD_STA_EN_R = crate::BitReader<bool>;
#[doc = "Field `SLV_WR_RD_STA_EN` writer - write and read status enable in the slave mode"]
pub type SLV_WR_RD_STA_EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, SLAVE_SPEC, bool, O>;
#[doc = "Field `SLV_WR_RD_BUF_EN` reader - write and read buffer enable in the slave mode"]
pub type SLV_WR_RD_BUF_EN_R = crate::BitReader<bool>;
#[doc = "Field `SLV_WR_RD_BUF_EN` writer - write and read buffer enable in the slave mode"]
pub type SLV_WR_RD_BUF_EN_W<'a, const O: u8> = crate::BitWriter<'a, u32, SLAVE_SPEC, bool, O>;
#[doc = "Field `MODE` reader - 1: slave mode 0: master mode."]
pub type MODE_R = crate::BitReader<bool>;
#[doc = "Field `MODE` writer - 1: slave mode 0: master mode."]
pub type MODE_W<'a, const O: u8> = crate::BitWriter<'a, u32, SLAVE_SPEC, bool, O>;
#[doc = "Field `SYNC_RESET` reader - Software reset enable, reset the spi clock line cs line and data lines."]
pub type SYNC_RESET_R = crate::BitReader<bool>;
#[doc = "Field `SYNC_RESET` writer - Software reset enable, reset the spi clock line cs line and data lines."]
pub type SYNC_RESET_W<'a, const O: u8> = crate::BitWriter<'a, u32, SLAVE_SPEC, bool, O>;
impl R {
#[doc = "Bit 0 - The interrupt raw bit for the completion of read-buffer operation in the slave mode."]
#[inline(always)]
pub fn slv_rd_buf_done(&self) -> SLV_RD_BUF_DONE_R {
SLV_RD_BUF_DONE_R::new((self.bits & 1) != 0)
}
#[doc = "Bit 1 - The interrupt raw bit for the completion of write-buffer operation in the slave mode."]
#[inline(always)]
pub fn slv_wr_buf_done(&self) -> SLV_WR_BUF_DONE_R {
SLV_WR_BUF_DONE_R::new(((self.bits >> 1) & 1) != 0)
}
#[doc = "Bit 2 - The interrupt raw bit for the completion of read-status operation in the slave mode."]
#[inline(always)]
pub fn slv_rd_sta_done(&self) -> SLV_RD_STA_DONE_R {
SLV_RD_STA_DONE_R::new(((self.bits >> 2) & 1) != 0)
}
#[doc = "Bit 3 - The interrupt raw bit for the completion of write-status operation in the slave mode."]
#[inline(always)]
pub fn slv_wr_sta_done(&self) -> SLV_WR_STA_DONE_R {
SLV_WR_STA_DONE_R::new(((self.bits >> 3) & 1) != 0)
}
#[doc = "Bit 4 - The interrupt raw bit for the completion of any operation in both the master mode and the slave mode."]
#[inline(always)]
pub fn trans_done(&self) -> TRANS_DONE_R {
TRANS_DONE_R::new(((self.bits >> 4) & 1) != 0)
}
#[doc = "Bits 5:9 - Interrupt enable bits for the below 5 sources"]
#[inline(always)]
pub fn int_en(&self) -> INT_EN_R {
INT_EN_R::new(((self.bits >> 5) & 0x1f) as u8)
}
#[doc = "Bits 10:11 - In the slave mode this bits used to synchronize the input spi cs signal and eliminate spi cs jitter."]
#[inline(always)]
pub fn cs_i_mode(&self) -> CS_I_MODE_R {
CS_I_MODE_R::new(((self.bits >> 10) & 3) as u8)
}
#[doc = "Bits 17:19 - In the slave mode it is the value of command."]
#[inline(always)]
pub fn slv_last_command(&self) -> SLV_LAST_COMMAND_R {
SLV_LAST_COMMAND_R::new(((self.bits >> 17) & 7) as u8)
}
#[doc = "Bits 20:22 - In the slave mode it is the state of spi state machine."]
#[inline(always)]
pub fn slv_last_state(&self) -> SLV_LAST_STATE_R {
SLV_LAST_STATE_R::new(((self.bits >> 20) & 7) as u8)
}
#[doc = "Bits 23:26 - The operations counter in both the master mode and the slave mode. 4: read-status"]
#[inline(always)]
pub fn trans_cnt(&self) -> TRANS_CNT_R {
TRANS_CNT_R::new(((self.bits >> 23) & 0x0f) as u8)
}
#[doc = "Bit 27 - 1: slave mode commands are defined in SPI_SLAVE3. 0: slave mode commands are fixed as: 1: write-status 2: write-buffer and 3: read-buffer."]
#[inline(always)]
pub fn slv_cmd_define(&self) -> SLV_CMD_DEFINE_R {
SLV_CMD_DEFINE_R::new(((self.bits >> 27) & 1) != 0)
}
#[doc = "Bit 28 - write and read status enable in the slave mode"]
#[inline(always)]
pub fn slv_wr_rd_sta_en(&self) -> SLV_WR_RD_STA_EN_R {
SLV_WR_RD_STA_EN_R::new(((self.bits >> 28) & 1) != 0)
}
#[doc = "Bit 29 - write and read buffer enable in the slave mode"]
#[inline(always)]
pub fn slv_wr_rd_buf_en(&self) -> SLV_WR_RD_BUF_EN_R {
SLV_WR_RD_BUF_EN_R::new(((self.bits >> 29) & 1) != 0)
}
#[doc = "Bit 30 - 1: slave mode 0: master mode."]
#[inline(always)]
pub fn mode(&self) -> MODE_R {
MODE_R::new(((self.bits >> 30) & 1) != 0)
}
#[doc = "Bit 31 - Software reset enable, reset the spi clock line cs line and data lines."]
#[inline(always)]
pub fn sync_reset(&self) -> SYNC_RESET_R {
SYNC_RESET_R::new(((self.bits >> 31) & 1) != 0)
}
}
impl W {
#[doc = "Bit 0 - The interrupt raw bit for the completion of read-buffer operation in the slave mode."]
#[inline(always)]
#[must_use]
pub fn slv_rd_buf_done(&mut self) -> SLV_RD_BUF_DONE_W<0> {
SLV_RD_BUF_DONE_W::new(self)
}
#[doc = "Bit 1 - The interrupt raw bit for the completion of write-buffer operation in the slave mode."]
#[inline(always)]
#[must_use]
pub fn slv_wr_buf_done(&mut self) -> SLV_WR_BUF_DONE_W<1> {
SLV_WR_BUF_DONE_W::new(self)
}
#[doc = "Bit 2 - The interrupt raw bit for the completion of read-status operation in the slave mode."]
#[inline(always)]
#[must_use]
pub fn slv_rd_sta_done(&mut self) -> SLV_RD_STA_DONE_W<2> {
SLV_RD_STA_DONE_W::new(self)
}
#[doc = "Bit 3 - The interrupt raw bit for the completion of write-status operation in the slave mode."]
#[inline(always)]
#[must_use]
pub fn slv_wr_sta_done(&mut self) -> SLV_WR_STA_DONE_W<3> {
SLV_WR_STA_DONE_W::new(self)
}
#[doc = "Bit 4 - The interrupt raw bit for the completion of any operation in both the master mode and the slave mode."]
#[inline(always)]
#[must_use]
pub fn trans_done(&mut self) -> TRANS_DONE_W<4> {
TRANS_DONE_W::new(self)
}
#[doc = "Bits 5:9 - Interrupt enable bits for the below 5 sources"]
#[inline(always)]
#[must_use]
pub fn int_en(&mut self) -> INT_EN_W<5> {
INT_EN_W::new(self)
}
#[doc = "Bits 10:11 - In the slave mode this bits used to synchronize the input spi cs signal and eliminate spi cs jitter."]
#[inline(always)]
#[must_use]
pub fn cs_i_mode(&mut self) -> CS_I_MODE_W<10> {
CS_I_MODE_W::new(self)
}
#[doc = "Bit 27 - 1: slave mode commands are defined in SPI_SLAVE3. 0: slave mode commands are fixed as: 1: write-status 2: write-buffer and 3: read-buffer."]
#[inline(always)]
#[must_use]
pub fn slv_cmd_define(&mut self) -> SLV_CMD_DEFINE_W<27> {
SLV_CMD_DEFINE_W::new(self)
}
#[doc = "Bit 28 - write and read status enable in the slave mode"]
#[inline(always)]
#[must_use]
pub fn slv_wr_rd_sta_en(&mut self) -> SLV_WR_RD_STA_EN_W<28> {
SLV_WR_RD_STA_EN_W::new(self)
}
#[doc = "Bit 29 - write and read buffer enable in the slave mode"]
#[inline(always)]
#[must_use]
pub fn slv_wr_rd_buf_en(&mut self) -> SLV_WR_RD_BUF_EN_W<29> {
SLV_WR_RD_BUF_EN_W::new(self)
}
#[doc = "Bit 30 - 1: slave mode 0: master mode."]
#[inline(always)]
#[must_use]
pub fn mode(&mut self) -> MODE_W<30> {
MODE_W::new(self)
}
#[doc = "Bit 31 - Software reset enable, reset the spi clock line cs line and data lines."]
#[inline(always)]
#[must_use]
pub fn sync_reset(&mut self) -> SYNC_RESET_W<31> {
SYNC_RESET_W::new(self)
}
#[doc = "Writes raw bits to the register."]
#[inline(always)]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self {
self.0.bits(bits);
self
}
}
#[doc = "\n\nThis register you can [`read`](crate::generic::Reg::read), [`write_with_zero`](crate::generic::Reg::write_with_zero), [`reset`](crate::generic::Reg::reset), [`write`](crate::generic::Reg::write), [`modify`](crate::generic::Reg::modify). See [API](https://docs.rs/svd2rust/#read--modify--write-api).\n\nFor information about available fields see [slave](index.html) module"]
pub struct SLAVE_SPEC;
impl crate::RegisterSpec for SLAVE_SPEC {
type Ux = u32;
}
#[doc = "`read()` method returns [slave::R](R) reader structure"]
impl crate::Readable for SLAVE_SPEC {
type Reader = R;
}
#[doc = "`write(|w| ..)` method takes [slave::W](W) writer structure"]
impl crate::Writable for SLAVE_SPEC {
type Writer = W;
const ZERO_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
const ONE_TO_MODIFY_FIELDS_BITMAP: Self::Ux = 0;
}
#[doc = "`reset()` method sets SLAVE to value 0x20"]
impl crate::Resettable for SLAVE_SPEC {
const RESET_VALUE: Self::Ux = 0x20;
}